CERC/hub
58
0
Fork 0
Code Issues 2 Pull Requests Actions Packages Projects Releases 84 Wiki Activity
5e33a41493
hub/data/schedules/ASHRAE901_OfficeSmall_STD2019_Buffalo.idf

6385 lines
277 KiB
Plaintext
Raw Normal View History

idf sample from DOE
2021-08-24 15:18:40 -04:00
!The DOE Prototype Building Models were developed by Pacific Northwest National Laboratory (PNNL), under contract with the U.S.
!Department of Energy (DOE). These building models were derived from DOE's Commercial Reference Building Models with modifications
!based on input from the ASHRAE Standard 90.1 committee, the Advanced Energy Design Guide series, and building industry experts. The
!prototypes models were developed to quantify energy saving impacts from newly published editions of ASHRAE Standard 90.1, 189.1, IECC,
!and other energy codes and standards. The basic building descriptions can be found in the Scorecards posted at www.energycodes.gov
!website. The recommended citation of the prototype models is
!
!DOE and PNNL. 2020. Commercial Prototype Building Models, Richland, WA, Pacific Northwest National Laboratory. Available at https://www.energycodes.gov/development/commercial/prototype_models.
!
!Detailed descriptions of the prototype model development and addenda modeling strategies can be found in the following reports:
!DOE, 2020. Preliminary Energy Savings Analysis: ANSI/ASHRAE/IES Standard 90.1-2019. Report prepared by Zhang, J., M. Rosenberg, J.
!Lerond, Y. Xie, Nambia, C., Y. Chen, R. Hart, M. Halverson, D. Maddox, and S. Goel, Richland, WA, Pacific Northwest National Laboratory.
!
!Zhang, J., Y. Chen, Y. Xie, M. Rosenberg, R. Hart. Energy and Energy Cost Savings Analysis of the 2018 IECC for Commercial Buildings.
!2018. PNNL-28125. Richland, WA: Pacific Northwest National Laboratory.
!
!DOE. 2017. Energy Savings Analysis: ANSI/ASHRAE/IES Standard 90.1-2016. Prepared by Athalye, R.A, M.A. Halverson, M.I. Rosenberg, B. Liu,
!J. Zhang, R. Hart, V.V. Mendon, S. Goel, Y. Chen, Y. Xie, and M. Zhao, Richland, WA, Pacific Northwest National Laboratory. https://www.energycodes.gov/sites/default/files/documents/02202018_Standard_90.1-2016_Determination_TSD.pdf.
!
!Zhang, J., Y. Xie, R.A. Athalye, J. Zhuge, M. Rosenberg, R. Hart, and B. Liu. Energy and Energy Cost Savings Analysis of the 2015 IECC
!for Commercial Buildings. 2015. PNNL-24269 Rev. 1. Richland, WA: Pacific Northwest National
!Laboratory. https://www.energycodes.gov/sites/default/files/documents/2015_IECC_Commercial_Analysis.pdf.
!
!Halverson M.A., M.I. Rosenberg, W. Wang, J. Zhang, V.V. Mendon, R.A. Athalye, Y. Xie, R. Hart, S. Goel, 2014. ANSI/ASHRAE/IES Standard
!90.1-2013 Determination of Energy Savings: Quantitative Analysis, PNNL-23479. Richland, WA: Pacific Northwest National Laboratory. https://www.energycodes.gov/sites/default/files/documents/901-2013_finalCommercialDeterminationQuantitativeAnalysis_TSD_0.pdf.
!
!Goel S., R.A. Athalye, W. Wang, J. Zhang, M.I. Rosenberg, Y. Xie, and R. Hart, et al. 2014. Enhancements to ASHRAE Standard 90.1
!Prototype Building Models. PNNL-23269. Richland, WA: Pacific Northwest National Laboratory. https://www.pnnl.gov/main/publications/external/technical_reports/PNNL-23269.pdf.
!
!Zhang J., R.A. Athalye, R. Hart, M.I. Rosenberg, Y. Xie, S. Goel, and V.V. Mendon, et al. 2013. Energy and Energy Cost Savings Analysis
!of the IECC for Commercial Buildings. PNNL-22760. Richland, WA: Pacific Northwest National Laboratory. http://www.pnnl.gov/main/publications/external/technical_reports/PNNL-22760.pdf.
!
!Thornton B.A., M.I. Rosenberg, E.E. Richman, W. Wang, Y. Xie, J. Zhang, H. Cho, VV Mendon, R.A. Athalye, and B. Liu. 2011. Achieving
!the 30% Goal: Energy and Cost Savings Analysis of ASHRAE Standard 90.1-2010. PNNL-20405. Richland, WA: Pacific Northwest National
!Laboratory. https://www.energycodes.gov/sites/default/files/documents/BECP_Energy_Cost_Savings_STD2010_May2011_v00.pdf.
!
!
! WeatherFile: USA_NY_Buffalo.Niagara.Intl.AP.725280_TMY3.epw
! BEGIN ECONOMIZER MAP
! Economizer Name, DX COIL Name
! PSZ-AC:1_OA_Controller, PSZ-AC:1 Heat Pump DX Cooling Coil
! PSZ-AC:2_OA_Controller, PSZ-AC:2 Heat Pump DX Cooling Coil
! PSZ-AC:3_OA_Controller, PSZ-AC:3 Heat Pump DX Cooling Coil
! PSZ-AC:4_OA_Controller, PSZ-AC:4 Heat Pump DX Cooling Coil
! PSZ-AC:5_OA_Controller, PSZ-AC:5 Heat Pump DX Cooling Coil
! END ECONOMIZER MAP
! GPARM parameters as input:
! Case = ASHRAE901_OfficeSmall_STD2019_Buffalo
! SelectedCase =
! annual_run = yes
! slab_gtp = National_OfficeSmall_ASHRAE901_STD2016_Zone5A_nonres_NY-Buffalo-NY.gtp
! basement_tempt = dummy.idf
! avg_oa_tempt_ip = 48.14
! maxdiff_oa_tempt_ip = 47.16
! ext_wall_type = WoodFramedWall
! nonres_ext_wall_ufactor = 0.289591413
! roof_type = WoodJoistAtticRoof
! nonres_roof_ufactor = 0.119243523
! roof_solar_absorp = 0.7
! nonres_window =
! sidelighting_control = yes_AY
! economizer = DifferentialDryBulb
! skip_economizer_control = No
! LPD_office = 6.888902667
! exterior_lights_watts = 0
! exterior_lights_watts_a = 50.7
! exterior_lights_watts_b = 115.1
! avg_oa_tempt = 8.966666667
! maxdiff_oa_tempt = 26.2
! infil = 0.00056896
! oa_flow_per_area = 0.000431773
! door_infil = 0.076455414
! frac_ofpk = 0.131
! damper_sch = MinOA_MotorizedDamper_Sched
! economizer_lockout = LockoutWithHeating
! BLDG_EQUIP_SCH = BLDG_EQUIP_SCH_ADV
! addendum_cd = 2016AS
! pv_generator = no
! pv_surface_area = 0
! STD189_overhang = no
! swh_et = 1
! swh_ua = 1.205980747
! ext_lgt_sch = Exterior_Lgt_ALWAYS_ON
! LTG_SCH_SET = LTG_SET_STD2013
! HtgSetP_Sch = HTGSETP_SCH_NO_OPTIMUM
! CLGSETP_SCH = CLGSETP_SCH_NO_OPTIMUM
! pipe_heat_loss = 571
! skip_EMSprogram = yes
! Wfile_TMY3 = USA_NY_Buffalo.Niagara.Intl.AP.725280_TMY3.epw
! loadProfile = No
! receptacle_ctrl_occ_reduction_frac = 0.959505267
! receptacle_ctrl_unocc_reduction_frac = 0.818955113
! CodeName = ASHRAE90.1_STD2019
! CZ_City_Old = Chicago
! CZ_Label = 5A
! exterior_lights_watts_c = 445.5
! Addendum_AH = Yes
! LPD_Ctrl = 0.02
! con_swingdoor_r = 0.475963827
! office_standby_mode = Yes
! nonres_window_u_factor = 0.36
! nonres_window_shgc = 0.38
! nonresLSG = 1.1
! AnalysisPurpose = ProgressIndicator
! AnalysisCodeName = ASHRAE901
! AnalysisCodeYear = 2019
! AnalysisAmendment = NoneAmend
! AnalysisPrototype = OfficeSmall
! AnalysisScope = National
! AnalysisState = National
! AnalysisClimateZone = 5A
! AnalysisCity = USA_NY_Buffalo
! var_Ffactor_IP = 0.52
! var_Cfactor_IP = 0.119
! Core_ZN_SWH_flow = 4.048e-06
! VT_Elec_Wheater = No
! specify overhang_pf for 1891 codes
Version,9.0;
!- =========== ALL OBJECTS IN CLASS: SIMULATIONCONTROL ===========
SimulationControl,
Yes, !- Do Zone Sizing Calculation
Yes, !- Do System Sizing Calculation
Yes, !- Do Plant Sizing Calculation
No, !- Run Simulation for Sizing Periods
YES; !- Run Simulation for Weather File Run Periods
!- =========== ALL OBJECTS IN CLASS: BUILDING ===========
Building,
OfficeSmall, !- Name
0.0000, !- North Axis {deg}
City, !- Terrain
0.0400, !- Loads Convergence Tolerance Value
0.2000, !- Temperature Convergence Tolerance Value {deltaC}
FullInteriorAndExterior, !- Solar Distribution
25, !- Maximum Number of Warmup Days
6; !- Minimum Number of Warmup Days
!- =========== ALL OBJECTS IN CLASS: SHADOWCALCULATION ===========
ShadowCalculation,
AverageOverDaysInFrequency, !- Calculation Method
30, !- Calculation Frequency
15000; !- Maximum Figures in Shadow Overlap Calculations
!- =========== ALL OBJECTS IN CLASS: SURFACECONVECTIONALGORITHM:INSIDE ===========
SurfaceConvectionAlgorithm:Inside,TARP;
!- =========== ALL OBJECTS IN CLASS: SURFACECONVECTIONALGORITHM:OUTSIDE ===========
SurfaceConvectionAlgorithm:Outside,TARP;
!- =========== ALL OBJECTS IN CLASS: HEATBALANCEALGORITHM ===========
HeatBalanceAlgorithm,ConductionTransferFunction,200.0000;
!- =========== ALL OBJECTS IN CLASS: TIMESTEP ===========
Timestep,6;
!- =========== ALL OBJECTS IN CLASS: CONVERGENCELIMITS ===========
ConvergenceLimits,
1, !- Minimum System Timestep {minutes}
20; !- Maximum HVAC Iterations
!- =========== ALL OBJECTS IN CLASS: RUNPERIOD ===========
RunPeriod,
, !- Name
1, !- Begin Month
1, !- Begin Day of Month
, !- Begin Year
12, !- End Month
31, !- End Day of Month
, !- End Year
Sunday, !- Day of Week for Start Day
No, !- Use Weather File Holidays and Special Days
No, !- Use Weather File Daylight Saving Period
No, !- Apply Weekend Holiday Rule
Yes, !- Use Weather File Rain Indicators
Yes; !- Use Weather File Snow Indicators
!- =========== ALL OBJECTS IN CLASS: RUNPERIODCONTROL:SPECIALDAYS ===========
RunPeriodControl:SpecialDays,
New Years Day, !- Name
January 1, !- Start Date
1, !- Duration {days}
Holiday; !- Special Day Type
RunPeriodControl:SpecialDays,
Veterans Day, !- Name
November 11, !- Start Date
1, !- Duration {days}
Holiday; !- Special Day Type
RunPeriodControl:SpecialDays,
Christmas, !- Name
December 25, !- Start Date
1, !- Duration {days}
Holiday; !- Special Day Type
RunPeriodControl:SpecialDays,
Independence Day, !- Name
July 4, !- Start Date
1, !- Duration {days}
Holiday; !- Special Day Type
RunPeriodControl:SpecialDays,
MLK Day, !- Name
3rd Monday in January, !- Start Date
1, !- Duration {days}
Holiday; !- Special Day Type
RunPeriodControl:SpecialDays,
Presidents Day, !- Name
3rd Monday in February, !- Start Date
1, !- Duration {days}
Holiday; !- Special Day Type
RunPeriodControl:SpecialDays,
Memorial Day, !- Name
Last Monday in May, !- Start Date
1, !- Duration {days}
Holiday; !- Special Day Type
RunPeriodControl:SpecialDays,
Labor Day, !- Name
1st Monday in September, !- Start Date
1, !- Duration {days}
Holiday; !- Special Day Type
RunPeriodControl:SpecialDays,
Columbus Day, !- Name
2nd Monday in October, !- Start Date
1, !- Duration {days}
Holiday; !- Special Day Type
RunPeriodControl:SpecialDays,
Thanksgiving, !- Name
4th Thursday in November,!- Start Date
1, !- Duration {days}
Holiday; !- Special Day Type
!- =========== ALL OBJECTS IN CLASS: RUNPERIODCONTROL:DAYLIGHTSAVINGTIME ===========
RunPeriodControl:DaylightSavingTime,
2nd Sunday in March, !- Start Date
1st Sunday in November; !- End Date
!- =========== ALL OBJECTS IN CLASS: LOCATION ===========
! Site:Location and design-day objects created by:
! ../../_p.bin/ddy2idf /projects/bigsim/weather/EnergyPlus/tmy3.new/all/USA_NY_Buffalo.Niagara.Intl.AP.725280_TMY3.ddy
!
Site:Location,
Buffalo.Niagara.Intl.AP_NY_USA WMO=725280, !- Site:Location Name
42.94, !- Latitude {N+ S-}
-78.74, !- Longitude {W- E+}
-5.00, !- Time Zone Relative to GMT {GMT+/-}
215.00; !- Elevation {m}
SizingPeriod:DesignDay,
Buffalo.Niagara.Intl.AP_NY_USA Ann Htg 99.6% Condns DB, !- Name
1, !- Month
21, !- Day of Month
WinterDesignDay,!- Day Type
-16.3, !- Maximum Dry-Bulb Temperature {C}
0.0, !- Daily Dry-Bulb Temperature Range {C}
DefaultMultipliers, !- Dry-Bulb Temperature Range Modifier Type
, !- Dry-Bulb Temperature Range Modifier Day Schedule Name
Wetbulb, !- Humidity Condition Type
-16.3, !- Wetbulb at Maximum Dry-Bulb {C}
, !- Humidity Indicating Day Schedule Name
, !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir}
, !- Enthalpy at Maximum Dry-Bulb {J/kg}
, !- Daily WetBulb Temperature Range {deltaC}
98769., !- Barometric Pressure {Pa}
5.1, !- Wind Speed {m/s} design conditions vs. traditional 6.71 m/s (15 mph)
270, !- Wind Direction {Degrees; N=0, S=180}
No, !- Rain {Yes/No}
No, !- Snow on ground {Yes/No}
No, !- Daylight Savings Time Indicator
ASHRAEClearSky, !- Solar Model Indicator
, !- Beam Solar Day Schedule Name
, !- Diffuse Solar Day Schedule Name
, !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub)
, !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud)
0.00; !- Clearness {0.0 to 1.1}
SizingPeriod:DesignDay,
Buffalo.Niagara.Intl.AP_NY_USA Ann Clg .4% Condns DB=>MWB, !- Name
7, !- Month
21, !- Day of Month
SummerDesignDay,!- Day Type
30.3, !- Maximum Dry-Bulb Temperature {C}
9.3, !- Daily Dry-Bulb Temperature Range {C}
DefaultMultipliers, !- Dry-Bulb Temperature Range Modifier Type
, !- Dry-Bulb Temperature Range Modifier Day Schedule Name
Wetbulb, !- Humidity Condition Type
21.8, !- Wetbulb at Maximum Dry-Bulb {C}
, !- Humidity Indicating Day Schedule Name
, !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir}
, !- Enthalpy at Maximum Dry-Bulb {J/kg}
, !- Daily WetBulb Temperature Range {deltaC}
98769., !- Barometric Pressure {Pa}
5.7, !- Wind Speed {m/s} design conditions vs. traditional 3.35 m/s (7mph)
240, !- Wind Direction {Degrees; N=0, S=180}
No, !- Rain {Yes/No}
No, !- Snow on ground {Yes/No}
No, !- Daylight Savings Time Indicator
ASHRAETau, !- Solar Model Indicator
, !- Beam Solar Day Schedule Name
, !- Diffuse Solar Day Schedule Name
0.462, !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub)
2.001; !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud)
!- =========== ALL OBJECTS IN CLASS: WATER MAINS TEMPERATURES ===========
Site:WaterMainsTemperature,
Correlation, !- Calculation Method
, !- Temperature Schedule Name
8.96666666666667, !- Annual average outdoor air temperature {C}
26.2; !- Maximum difference in monthly average outdoor air temperatures {C}
!- =========== ALL OBJECTS IN CLASS: Site:GroundTemperature:FCfactorMethod ===========
Site:GroundTemperature:FCfactorMethod,
9.7, !- January Ground Temperature {C}
6.0, !- February Ground Temperature {C}
-2.2, !- March Ground Temperature {C}
-3.4, !- April Ground Temperature {C}
-4.2, !- May Ground Temperature {C}
2.7, !- June Ground Temperature {C}
7.5, !- July Ground Temperature {C}
13.7, !- August Ground Temperature {C}
18.6, !- September Ground Temperature {C}
22.0, !- October Ground Temperature {C}
20.7, !- November Ground Temperature {C}
16.5; !- December Ground Temperature {C}
!- =========== ALL OBJECTS IN CLASS: MATERIAL:REGULAR-R ===========
Material:NoMass,
Opaque Door panel_con, !- Name
MediumRough, !- Roughness
0.475963827, !- Thermal Resistance {m2-K/W}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.7; !- Visible Absorptance
!- =========== ALL OBJECTS IN CLASS: CONSTRUCTION ===========
Construction,
Swinging Door_con, !- Name
Opaque Door panel_con; !- Outside Layer
!- =========== ALL OBJECTS IN CLASS: SCHEDULETYPELIMITS ===========
ScheduleTypeLimits,
Any Number; !- Name
ScheduleTypeLimits,
Fraction, !- Name
0.0, !- Lower Limit Value
1.0, !- Upper Limit Value
CONTINUOUS; !- Numeric Type
ScheduleTypeLimits,
Temperature, !- Name
-60, !- Lower Limit Value
200, !- Upper Limit Value
CONTINUOUS; !- Numeric Type
ScheduleTypeLimits,
On/Off, !- Name
0, !- Lower Limit Value
1, !- Upper Limit Value
DISCRETE; !- Numeric Type
ScheduleTypeLimits,
Control Type, !- Name
0, !- Lower Limit Value
4, !- Upper Limit Value
DISCRETE; !- Numeric Type
ScheduleTypeLimits,
Humidity, !- Name
10, !- Lower Limit Value
90, !- Upper Limit Value
CONTINUOUS; !- Numeric Type
ScheduleTypeLimits,
Number; !- Name
!- =========== ALL OBJECTS IN CLASS: SCHEDULE:COMPACT ===========
Schedule:Compact,
BLDG_LIGHT_SCH, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays, !- Field 2
Until: 5:00,0.18, !- Field 3
Until: 6:00,0.23, !- Field 4
Until: 7:00,0.178641345, !- Field 5
Until: 8:00,0.32621463, !- Field 6
Until: 12:00,0.69903135, !- Field 7
Until: 13:00,0.6213612, !- Field 8
Until: 17:00,0.69903135, !- Field 9
Until: 18:00,0.473787915, !- Field 10
Until: 20:00,0.32621463, !- Field 11
Until: 22:00,0.24854448, !- Field 12
Until: 23:00,0.178641345, !- Field 13
Until: 24:00,0.18, !- Field 14
For: Weekends, !- Field 15
Until: 24:00,0.18, !- Field 16
For: Holiday, !- Field 17
Until: 24:00,0.18, !- Field 18
For: WinterDesignDay, !- Field 19
Until: 24:00,0, !- Field 20
For: SummerDesignDay, !- Field 21
Until: 24:00,1, !- Field 22
For: CustomDay1, !- Field 23
Until: 24:00,0, !- Field 24
For: CustomDay2, !- Field 25
Until: 24:00,0; !- Field 26
Schedule:Compact,
BLDG_EQUIP_SCH, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: WeekDays, !- Field 2
Until: 6:00,0.4094775565, !- Field 3
Until: 8:00,0.4797526335, !- Field 3
Until: 12:00,0.959505267, !- Field 5
Until: 13:00,0.90193495098, !- Field 7
Until: 17:00,0.959505267, !- Field 9
Until: 18:00,0.4797526335, !- Field 11
Until: 23:00,0.1919010534, !- Field 13
Until: 24:00,0.1637910226, !- Field 13
For: Weekends, !- Field 15
Until: 24:00,0.1637910226, !- Field 16
For: Holiday, !- Field 18
Until: 24:00,0.1637910226, !- Field 19
For: WinterDesignDay, !- Field 21
Until: 24:00,0.0, !- Field 22
For: SummerDesignDay, !- Field 24
Until: 24:00,1.0, !- Field 25
For: CustomDay1, !- Field 27
Until: 24:00,0.0, !- Field 28
For: CustomDay2, !- Field 30
Until: 24:00,0.0; !- Field 31
Schedule:Compact,
BLDG_OCC_SCH, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays, !- Field 2
Until: 6:00,0.0, !- Field 3
Until: 7:00,0.11, !- Field 5
Until: 8:00,0.21, !- Field 7
Until: 12:00,1.0, !- Field 9
Until: 13:00,0.53, !- Field 11
Until: 17:00,1.0, !- Field 13
Until: 18:00,0.32, !- Field 15
Until: 22:00,0.11, !- Field 17
Until: 23:00,0.05, !- Field 19
Until: 24:00,0.0, !- Field 21
For: Weekends, !- Field 23
Until: 24:00,0.0, !- Field 24
For: Holiday, !- Field 26
Until: 24:00,0.0, !- Field 27
For: WinterDesignDay, !- Field 29
Until: 24:00,0.0, !- Field 30
For: SummerDesignDay, !- Field 32
Until: 24:00,1.0, !- Field 33
For: CustomDay1, !- Field 35
Until: 24:00,0.0, !- Field 36
For: CustomDay2, !- Field 38
Until: 24:00,0.0; !- Field 39
Schedule:Compact,
BLDG_OCC_SCH_w_SB, !-Name
Fraction, !-Schedule Type Limits Name
Through: 12/31,
For: Weekdays,
Until: 01:00, 0,
Until: 02:00, 0,
Until: 03:00, 0,
Until: 04:00, 0,
Until: 05:00, 0,
Until: 06:00, 0,
Until: 07:00, 0.11,
Until: 08:00, 0.21,
Until: 09:00, 1,
Until: 10:00, 1,
Until: 11:00, 0,
Until: 12:00, 1,
Until: 13:00, 0,
Until: 14:00, 1,
Until: 15:00, 0,
Until: 16:00, 1,
Until: 17:00, 1,
Until: 18:00, 0.32,
Until: 19:00, 0.11,
Until: 20:00, 0.11,
Until: 21:00, 0.11,
Until: 22:00, 0.11,
Until: 23:00, 0.05,
Until: 24:00, 0,
For: Weekends,
Until: 01:00, 0,
Until: 02:00, 0,
Until: 03:00, 0,
Until: 04:00, 0,
Until: 05:00, 0,
Until: 06:00, 0,
Until: 07:00, 0,
Until: 08:00, 0,
Until: 09:00, 0,
Until: 10:00, 0,
Until: 11:00, 0,
Until: 12:00, 0,
Until: 13:00, 0,
Until: 14:00, 0,
Until: 15:00, 0,
Until: 16:00, 0,
Until: 17:00, 0,
Until: 18:00, 0,
Until: 19:00, 0,
Until: 20:00, 0,
Until: 21:00, 0,
Until: 22:00, 0,
Until: 23:00, 0,
Until: 24:00, 0,
For: Holiday,
Until: 24:00,0.0,
For: WinterDesignDay,
Until: 24:00,0.0,
For: SummerDesignDay,
Until: 24:00,1.0,
For: CustomDay1,
Until: 24:00,0.0,
For: CustomDay2,
Until: 24:00,0.0;
Schedule:Compact,
BLDG_OCC_SCH_wo_SB, !-Name
Fraction, !-Schedule Type Limits Name
Through: 12/31,
For: Weekdays,
Until: 01:00, 0,
Until: 02:00, 0,
Until: 03:00, 0,
Until: 04:00, 0,
Until: 05:00, 0,
Until: 06:00, 0,
Until: 07:00, 0.11,
Until: 08:00, 0.21,
Until: 09:00, 1,
Until: 10:00, 1,
Until: 11:00, 1,
Until: 12:00, 1,
Until: 13:00, 0.610394505402463,
Until: 14:00, 1,
Until: 15:00, 1,
Until: 16:00, 1,
Until: 17:00, 1,
Until: 18:00, 0.32,
Until: 19:00, 0.11,
Until: 20:00, 0.11,
Until: 21:00, 0.11,
Until: 22:00, 0.11,
Until: 23:00, 0.05,
Until: 24:00, 0,
For: Weekends,
Until: 01:00, 0,
Until: 02:00, 0,
Until: 03:00, 0,
Until: 04:00, 0,
Until: 05:00, 0,
Until: 06:00, 0,
Until: 07:00, 0,
Until: 08:00, 0,
Until: 09:00, 0,
Until: 10:00, 0,
Until: 11:00, 0,
Until: 12:00, 0,
Until: 13:00, 0,
Until: 14:00, 0,
Until: 15:00, 0,
Until: 16:00, 0,
Until: 17:00, 0,
Until: 18:00, 0,
Until: 19:00, 0,
Until: 20:00, 0,
Until: 21:00, 0,
Until: 22:00, 0,
Until: 23:00, 0,
Until: 24:00, 0,
For: Holiday,
Until: 24:00,0.0,
For: WinterDesignDay,
Until: 24:00,0.0,
For: SummerDesignDay,
Until: 24:00,1.0,
For: CustomDay1,
Until: 24:00,0.0,
For: CustomDay2,
Until: 24:00,0.0;
Schedule:Compact,
Binary Occupancy, !-Name
Fraction, !-Schedule Type Limits Name
Through: 12/31,
For: Weekdays,
Until: 01:00, 0,
Until: 02:00, 0,
Until: 03:00, 0,
Until: 04:00, 0,
Until: 05:00, 0,
Until: 06:00, 0,
Until: 07:00, 1,
Until: 08:00, 1,
Until: 09:00, 1,
Until: 10:00, 1,
Until: 11:00, 1,
Until: 12:00, 1,
Until: 13:00, 1,
Until: 14:00, 1,
Until: 15:00, 1,
Until: 16:00, 1,
Until: 17:00, 1,
Until: 18:00, 1,
Until: 19:00, 1,
Until: 20:00, 1,
Until: 21:00, 1,
Until: 22:00, 1,
Until: 23:00, 1,
Until: 24:00, 0,
For: Weekends,
Until: 01:00, 0,
Until: 02:00, 0,
Until: 03:00, 0,
Until: 04:00, 0,
Until: 05:00, 0,
Until: 06:00, 0,
Until: 07:00, 0,
Until: 08:00, 0,
Until: 09:00, 0,
Until: 10:00, 0,
Until: 11:00, 0,
Until: 12:00, 0,
Until: 13:00, 0,
Until: 14:00, 0,
Until: 15:00, 0,
Until: 16:00, 0,
Until: 17:00, 0,
Until: 18:00, 0,
Until: 19:00, 0,
Until: 20:00, 0,
Until: 21:00, 0,
Until: 22:00, 0,
Until: 23:00, 0,
Until: 24:00, 0,
For: Holiday,
Until: 24:00,0.0,
For: WinterDesignDay,
Until: 24:00,0.0,
For: SummerDesignDay,
Until: 24:00,1.0,
For: CustomDay1,
Until: 24:00,0.0,
For: CustomDay2,
Until: 24:00,0.0;
Schedule:Compact,
INFIL_QUARTER_ON_SCH, !- Name
fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until: 07:00,1.0, !- Field 3
Until: 19:00,0.25, !- Field 5
Until: 24:00,1.0, !- Field 7
For: Saturday WinterDesignDay, !- Field 9
Until: 07:00,1.0, !- Field 10
Until: 18:00,0.25, !- Field 12
Until: 24:00,1.0, !- Field 14
For: Sunday Holidays AllOtherDays, !- Field 16
Until: 24:00,1.0; !- Field 17
Schedule:Compact,
INFIL_Door_Opening_SCH, !- Name
fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays, !- Field 2
Until: 06:00,0.0, !- Field 3
Until: 07:00,
0.131, !- Field 6
Until: 08:00,1.0, !- Field 7
Until: 12:00,
0.131, !- Field 10
Until: 13:00,1.0, !- Field 11
Until: 17:00,
0.131, !- Field 14
Until: 18:00,1.0, !- Field 15
Until: 19:00,
0.131, !- Field 18
Until: 24:00,0.0, !- Field 19
For: Saturday Sunday Holidays AllOtherDays, !- Field 21
Until: 24:00,0.0; !- Field 22
Schedule:Compact,
BLDG_SWH_SCH, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: WeekDays, !- Field 2
Until: 7:00,0.0, !- Field 3
Until: 8:00,0.27, !- Field 5
Until: 9:00,0.55, !- Field 7
Until: 11:00,0.64, !- Field 9
Until: 12:00,0.82, !- Field 11
Until: 13:00,1.0, !- Field 13
Until: 14:00,0.91, !- Field 15
Until: 16:00,0.55, !- Field 17
Until: 17:00,0.73, !- Field 19
Until: 19:00,0.37, !- Field 21
Until: 20:00,0.18, !- Field 23
Until: 21:00,0.27, !- Field 25
Until: 22:00,0.09, !- Field 27
Until: 24:00,0.0, !- Field 29
For: Weekends, !- Field 31
Until: 24:00,0.0, !- Field 32
For: Holiday, !- Field 34
Until: 24:00,0.0, !- Field 35
For: WinterDesignDay, !- Field 37
Until: 7:00,0.0, !- Field 38
Until: 8:00,0.27, !- Field 40
Until: 9:00,0.55, !- Field 42
Until: 11:00,0.64, !- Field 44
Until: 12:00,0.82, !- Field 46
Until: 13:00,1.0, !- Field 48
Until: 14:00,0.91, !- Field 50
Until: 16:00,0.55, !- Field 52
Until: 17:00,0.73, !- Field 54
Until: 19:00,0.37, !- Field 56
Until: 20:00,0.18, !- Field 58
Until: 21:00,0.27, !- Field 60
Until: 22:00,0.09, !- Field 62
Until: 24:00,0.0, !- Field 64
For: SummerDesignDay, !- Field 66
Until: 7:00,0.0, !- Field 67
Until: 8:00,0.27, !- Field 69
Until: 9:00,0.55, !- Field 71
Until: 11:00,0.64, !- Field 73
Until: 12:00,0.82, !- Field 75
Until: 13:00,1.0, !- Field 77
Until: 14:00,0.91, !- Field 79
Until: 16:00,0.55, !- Field 81
Until: 17:00,0.73, !- Field 83
Until: 19:00,0.37, !- Field 85
Until: 20:00,0.18, !- Field 87
Until: 21:00,0.27, !- Field 89
Until: 22:00,0.09, !- Field 91
Until: 24:00,0.0, !- Field 93
For: CustomDay1, !- Field 95
Until: 24:00,0.0, !- Field 96
For: CustomDay2, !- Field 98
Until: 24:00,0.0; !- Field 99
Schedule:Compact,
ALWAYS_ON, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,1.0; !- Field 3
Schedule:Compact,
Exterior_Lgt_ALWAYS_ON, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,1; !- Field 3
Schedule:Compact,
Exterior_Lgt_189_1, !- Name
Fraction, !- Schedule Type Limits Name
Through:12/31, !- Field 1
For:Weekdays, !- Field 2
Until: 9:00,0.5, !- Field 3
Until: 23:00,1.0, !- Field 5
Until: 24:00,0.5, !- Field 7
For:Saturday, !- Field 9
Until: 24:00,0.5, !- Field 10
FOR:Sunday Holidays AllOtherDays, !- Field 12
Until: 24:00,0.5; !- Field 13
Schedule:Compact,
ALWAYS_OFF, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,0.0; !- Field 3
Schedule:Compact,
HVACOperationSchd, !- Name
on/off, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until: 06:00,0.0, !- Field 3
Until: 19:00,1.0, !- Field 5
Until: 24:00,0.0, !- Field 7
For: Weedends WinterDesignDay, !- Field 9
Until: 24:00,0.0, !- Field 10
For: Holidays AllOtherDays, !- Field 12
Until: 24:00,0.0; !- Field 13
Schedule:Compact,
HVACOperationSchd_w_SB, !-Name
Fraction, !-Schedule Type Limits Name
Through: 12/31,
For: Weekdays,
Until: 01:00, 0,
Until: 02:00, 0,
Until: 03:00, 0,
Until: 04:00, 0,
Until: 05:00, 0,
Until: 06:00, 0,
Until: 07:00, 1,
Until: 08:00, 1,
Until: 09:00, 1,
Until: 10:00, 1,
Until: 11:00, 0,
Until: 12:00, 1,
Until: 13:00, 0,
Until: 14:00, 1,
Until: 15:00, 0,
Until: 16:00, 1,
Until: 17:00, 1,
Until: 18:00, 1,
Until: 19:00, 1,
Until: 20:00, 0,
Until: 21:00, 0,
Until: 22:00, 0,
Until: 23:00, 0,
Until: 24:00, 0,
For: Weekends,
Until: 01:00, 0,
Until: 02:00, 0,
Until: 03:00, 0,
Until: 04:00, 0,
Until: 05:00, 0,
Until: 06:00, 0,
Until: 07:00, 0,
Until: 08:00, 0,
Until: 09:00, 0,
Until: 10:00, 0,
Until: 11:00, 0,
Until: 12:00, 0,
Until: 13:00, 0,
Until: 14:00, 0,
Until: 15:00, 0,
Until: 16:00, 0,
Until: 17:00, 0,
Until: 18:00, 0,
Until: 19:00, 0,
Until: 20:00, 0,
Until: 21:00, 0,
Until: 22:00, 0,
Until: 23:00, 0,
Until: 24:00, 0,
For: SummerDesignDay,
Until: 06:00,
0.0,
Until: 19:00,
1.0,
Until: 24:00,
0.0,
For: WinterDesignDay,
Until: 24:00,
0.0,
For: Holidays AllOtherDays,
Until: 24:00,
0.0;
Schedule:Compact,
PlantOnSched, !- Name
On/Off, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,1.0; !- Field 3
Schedule:Compact,
ReheatCoilAvailSched, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,1.0; !- Field 3
Schedule:Compact,
CoolingCoilAvailSched, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,1.0; !- Field 3
Schedule:Compact,
HTGSETP_SCH_NO_OPTIMUM, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: WeekDays, !- Field 2
Until: 6:00,15.56, !- Field 3
Until: 7:00,21.11, !- Field 5
Until: 19:00,21.11, !- Field 7
Until: 24:00,15.56, !- Field 9
For: Weekends, !- Field 11
Until: 24:00,15.56, !- Field 12
For: Holiday, !- Field 14
Until: 24:00,15.56, !- Field 15
For: WinterDesignDay, !- Field 17
Until: 24:00,21.11, !- Field 18
For: SummerDesignDay, !- Field 20
Until: 24:00,15.56, !- Field 21
For: CustomDay1, !- Field 23
Until: 24:00,15.56, !- Field 24
For: CustomDay2, !- Field 26
Until: 24:00,15.56; !- Field 27
Schedule:Compact,
HTGSETP_SCH_NO_OPTIMUM_w_SB, !-Name
Temperature, !-Schedule Type Limits Name
Through: 12/31,
For: Weekdays,
Until: 01:00, 15.56,
Until: 02:00, 15.56,
Until: 03:00, 15.56,
Until: 04:00, 15.56,
Until: 05:00, 15.56,
Until: 06:00, 15.56,
Until: 07:00, 21.11,
Until: 08:00, 21.11,
Until: 09:00, 21.11,
Until: 10:00, 21.11,
Until: 11:00, 20.5544444444444,
Until: 12:00, 21.11,
Until: 13:00, 20.5544444444444,
Until: 14:00, 21.11,
Until: 15:00, 20.5544444444444,
Until: 16:00, 21.11,
Until: 17:00, 21.11,
Until: 18:00, 21.11,
Until: 19:00, 21.11,
Until: 20:00, 15.56,
Until: 21:00, 15.56,
Until: 22:00, 15.56,
Until: 23:00, 15.56,
Until: 24:00, 15.56,
For: Weekends,
Until: 01:00, 15.56,
Until: 02:00, 15.56,
Until: 03:00, 15.56,
Until: 04:00, 15.56,
Until: 05:00, 15.56,
Until: 06:00, 15.56,
Until: 07:00, 15.56,
Until: 08:00, 15.56,
Until: 09:00, 15.56,
Until: 10:00, 15.56,
Until: 11:00, 15.56,
Until: 12:00, 15.56,
Until: 13:00, 15.56,
Until: 14:00, 15.56,
Until: 15:00, 15.56,
Until: 16:00, 15.56,
Until: 17:00, 15.56,
Until: 18:00, 15.56,
Until: 19:00, 15.56,
Until: 20:00, 15.56,
Until: 21:00, 15.56,
Until: 22:00, 15.56,
Until: 23:00, 15.56,
Until: 24:00, 15.56,
For: Holiday,
Until: 24:00,15.56,
For: WinterDesignDay,
Until: 24:00,21.11,
For: SummerDesignDay,
Until: 24:00,15.56,
For: CustomDay1,
Until: 24:00,15.56,
For: CustomDay2,
Until: 24:00,15.56;
Schedule:Compact,
HTGSETP_SCH_YES_OPTIMUM, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: WeekDays, !- Field 2
Until: 6:00,15.56, !- Field 3
Until: 7:00,17.8, !- Field 5
Until: 8:00,20.0, !- Field 7
Until: 19:00,21.11, !- Field 9
Until: 24:00,15.56, !- Field 11
For: Weekends, !- Field 13
Until: 24:00,15.56, !- Field 14
For: Holiday, !- Field 16
Until: 24:00,15.56, !- Field 17
For: WinterDesignDay, !- Field 19
Until: 24:00,21.11, !- Field 20
For: SummerDesignDay, !- Field 22
Until: 24:00,15.56, !- Field 23
For: CustomDay1, !- Field 25
Until: 24:00,15.56, !- Field 26
For: CustomDay2, !- Field 28
Until: 24:00,15.56; !- Field 29
Schedule:Compact,
CLGSETP_SCH_NO_OPTIMUM, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: WeekDays, !- Field 2
Until: 6:00,29.44, !- Field 3
Until: 7:00,23.89, !- Field 5
Until: 18:00,23.89, !- Field 7
Until: 24:00,29.44, !- Field 9
For: Weekends, !- Field 11
Until: 24:00,29.44, !- Field 12
For: Holiday, !- Field 14
Until: 24:00,29.44, !- Field 15
For: WinterDesignDay, !- Field 17
Until: 24:00,29.44, !- Field 18
For: SummerDesignDay, !- Field 20
Until: 24:00,23.89, !- Field 21
For: CustomDay1, !- Field 23
Until: 24:00,29.44, !- Field 24
For: CustomDay2, !- Field 26
Until: 24:00,29.44; !- Field 27
Schedule:Compact,
CLGSETP_SCH_NO_OPTIMUM_w_SB, !-Name
Temperature, !-Schedule Type Limits Name
Through: 12/31,
For: Weekdays,
Until: 01:00, 29.44,
Until: 02:00, 29.44,
Until: 03:00, 29.44,
Until: 04:00, 29.44,
Until: 05:00, 29.44,
Until: 06:00, 29.44,
Until: 07:00, 23.89,
Until: 08:00, 23.89,
Until: 09:00, 23.89,
Until: 10:00, 23.89,
Until: 11:00, 24.4455555555556,
Until: 12:00, 23.89,
Until: 13:00, 24.4455555555556,
Until: 14:00, 23.89,
Until: 15:00, 24.4455555555556,
Until: 16:00, 23.89,
Until: 17:00, 23.89,
Until: 18:00, 23.89,
Until: 19:00, 29.44,
Until: 20:00, 29.44,
Until: 21:00, 29.44,
Until: 22:00, 29.44,
Until: 23:00, 29.44,
Until: 24:00, 29.44,
For: Weekends,
Until: 01:00, 29.44,
Until: 02:00, 29.44,
Until: 03:00, 29.44,
Until: 04:00, 29.44,
Until: 05:00, 29.44,
Until: 06:00, 29.44,
Until: 07:00, 29.44,
Until: 08:00, 29.44,
Until: 09:00, 29.44,
Until: 10:00, 29.44,
Until: 11:00, 29.44,
Until: 12:00, 29.44,
Until: 13:00, 29.44,
Until: 14:00, 29.44,
Until: 15:00, 29.44,
Until: 16:00, 29.44,
Until: 17:00, 29.44,
Until: 18:00, 29.44,
Until: 19:00, 29.44,
Until: 20:00, 29.44,
Until: 21:00, 29.44,
Until: 22:00, 29.44,
Until: 23:00, 29.44,
Until: 24:00, 29.44,
For: Holiday,
Until: 24:00,29.44,
For: WinterDesignDay,
Until: 24:00,29.44,
For: SummerDesignDay,
Until: 24:00,23.89,
For: CustomDay1,
Until: 24:00,29.44,
For: CustomDay2,
Until: 24:00,29.44;
Schedule:Compact,
CLGSETP_SCH_YES_OPTIMUM, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: WeekDays, !- Field 2
Until: 6:00,29.44, !- Field 3
Until: 7:00,27.8, !- Field 5
Until: 8:00,25.6, !- Field 7
Until: 18:00,23.89, !- Field 9
Until: 24:00,29.44, !- Field 11
For: Weekends, !- Field 13
Until: 24:00,29.44, !- Field 14
For: Holiday, !- Field 16
Until: 24:00,29.44, !- Field 17
For: WinterDesignDay, !- Field 19
Until: 24:00,29.44, !- Field 20
For: SummerDesignDay, !- Field 22
Until: 24:00,23.89, !- Field 23
For: CustomDay1, !- Field 25
Until: 24:00,29.44, !- Field 26
For: CustomDay2, !- Field 28
Until: 24:00,29.44; !- Field 29
Schedule:Compact,
CLGSETP_SCH_NO_SETBACK, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: WeekDays, !- Field 2
Until: 6:00,23.89, !- Field 3
Until: 7:00,23.89, !- Field 5
Until: 18:00,23.89, !- Field 7
Until: 24:00,23.89, !- Field 9
For: Weekends, !- Field 11
Until: 24:00,23.89, !- Field 12
For: Holiday, !- Field 14
Until: 24:00,23.89, !- Field 15
For: WinterDesignDay, !- Field 17
Until: 24:00,29.44, !- Field 18
For: SummerDesignDay, !- Field 20
Until: 24:00,23.89, !- Field 21
For: CustomDay1, !- Field 23
Until: 24:00,23.89, !- Field 24
For: CustomDay2, !- Field 26
Until: 24:00,23.89; !- Field 27
Schedule:Compact,
Humidity Setpoint Schedule, !- Name
Humidity, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until: 24:00,50, !- Field 3
For: Saturday WinterDesignDay, !- Field 5
Until: 24:00,50, !- Field 6
For: Sunday Holidays AllOtherDays, !- Field 8
Until: 24:00,50; !- Field 9
Schedule:Compact,
MinOA_MotorizedDamper_Sched, !- Name
fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until: 07:00,0.0, !- Field 3
Until: 19:00,1.0, !- Field 5
Until: 24:00,0.0, !- Field 7
For: Weekends WinterDesignDay, !- Field 9
Until: 24:00,0.0, !- Field 10
For: Holidays AllOtherDays, !- Field 12
Until: 24:00,0.0; !- Field 13
Schedule:Compact,
MinOA_Sched, !- Name
fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,1.0; !- Field 3
Schedule:Compact,
Dual Zone Control Type Sched, !- Name
Control Type, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,4; !- Field 3
Schedule:Compact,
Seasonal-Reset-Supply-Air-Temp-Sch, !- Name
Temperature, !- Schedule Type Limits Name
Through: 3/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,13.0, !- Field 3
Through: 9/30, !- Field 5
For: AllDays, !- Field 6
Until: 24:00,13.0, !- Field 7
Through: 12/31, !- Field 9
For: AllDays, !- Field 10
Until: 24:00,13.0; !- Field 11
Schedule:Compact,
CW-Loop-Temp-Schedule, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,6.7; !- Field 3
Schedule:Compact,
HW-Loop-Temp-Schedule, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,60.; !- Field 3
Schedule:Compact,
Heating-Supply-Air-Temp-Sch, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,16.0; !- Field 3
Schedule:Compact,
ACTIVITY_SCH, !- Name
Any Number, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,120.; !- Field 3
Schedule:Compact,
WORK_EFF_SCH, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,0.0; !- Field 3
Schedule:Compact,
AIR_VELO_SCH, !- Name
Any Number, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,0.2; !- Field 3
Schedule:Compact,
CLOTHING_SCH, !- Name
Any Number, !- Schedule Type Limits Name
Through: 04/30, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,1.0, !- Field 3
Through: 09/30, !- Field 5
For: AllDays, !- Field 6
Until: 24:00,0.5, !- Field 7
Through: 12/31, !- Field 9
For: AllDays, !- Field 10
Until: 24:00,1.0; !- Field 11
Schedule:Compact,
SHADING_SCH, !- Name
Any Number, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,0.0; !- Field 3
Schedule:Compact,
Core_ZN Water Equipment Latent fract sched, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,0.05; !- Field 3
Schedule:Compact,
Core_ZN Water Equipment Sensible fract sched, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,0.2; !- Field 3
Schedule:Compact,
Core_ZN Water Equipment Temp Sched, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,48.8; !- Field 3
Schedule:Compact,
Core_ZN Water Equipment Hot Supply Temp Sched, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,55; !- Field 3
Schedule:Compact,
SHWSys1-Loop-Temp-Schedule, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,60; !- Field 3
Schedule:Compact,
SHWSys1 Water Heater Setpoint Temperature Schedule, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,60.00; !- Field 3
Schedule:Compact,
SHWSys1 Water Heater Ambient Temperature Schedule, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,22.0; !- Field 3
!- =========== ALL OBJECTS IN CLASS: CONSTRUCTION ===========
!
!- =========== ALL OBJECTS IN CLASS: MATERIAL:REGULAR ===========
Material,
Std Wood 6inch, !- Name
MediumSmooth, !- Roughness
0.15, !- Thickness {m}
0.12, !- Conductivity {W/m-K}
540.0000, !- Density {kg/m3}
1210, !- Specific Heat {J/kg-K}
0.9000000, !- Thermal Absorptance
0.7000000, !- Solar Absorptance
0.7000000; !- Visible Absorptance
Material,
AC02 Acoustic Ceiling, !- Name
MediumSmooth, !- Roughness
1.2700000E-02, !- Thickness {m}
5.7000000E-02, !- Conductivity {W/m-K}
288.0000, !- Density {kg/m3}
1339.000, !- Specific Heat {J/kg-K}
0.9000000, !- Thermal Absorptance
0.7000000, !- Solar Absorptance
0.2000000; !- Visible Absorptance
Material,
F07 25mm stucco, !- Name
Smooth, !- Roughness
0.0254, !- Thickness {m}
0.72, !- Conductivity {W/m-K}
1856, !- Density {kg/m3}
840, !- Specific Heat {J/kg-K}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.7; !- Visible Absorptance
Material,
F08 Metal surface, !- Name
Smooth, !- Roughness
0.0008, !- Thickness {m}
45.28, !- Conductivity {W/m-K}
7824, !- Density {kg/m3}
500; !- Specific Heat {J/kg-K}
Material,
F08 Metal roof surface, !- Name
Smooth, !- Roughness
0.0008, !- Thickness {m}
45.28, !- Conductivity {W/m-K}
7824, !- Density {kg/m3}
500, !- Specific Heat {J/kg-K}
0.9, !- Absorptance:Thermal
0.7; !- Absorptance:Solar
Material,
F12 Asphalt shingles, !- Name
VeryRough, !- Roughness
0.0032, !- Thickness {m}
0.04, !- Conductivity {W/m-K}
1120, !- Density {kg/m3}
1260, !- Specific Heat {J/kg-K}
0.9, !- Absorptance:Thermal
0.7; !- Absorptance:Solar
Material,
F13 Built-up roofing, !- Name
Rough, !- Roughness
0.0095, !- Thickness {m}
0.16, !- Conductivity {W/m-K}
1120, !- Density {kg/m3}
1460, !- Specific Heat {J/kg-K}
0.9, !- Absorptance:Thermal
0.7; !- Absorptance:Solar
Material,
G01 13mm gypsum board, !- Name
Smooth, !- Roughness
0.0127, !- Thickness {m}
0.1600, !- Conductivity {W/m-K}
800.0000, !- Density {kg/m3}
1090.0000, !- Specific Heat {J/kg-K}
0.9000, !- Absorptance:Thermal
0.7000, !- Absorptance:Solar
0.5000; !- Absorptance:Visible
Material,
G01 16mm gypsum board, !- Name
MediumSmooth, !- Roughness
0.0159, !- Thickness {m}
0.16, !- Conductivity {W/m-K}
800, !- Density {kg/m3}
1090; !- Specific Heat {J/kg-K}
Material,
G02 16mm plywood, !- Name
Smooth, !- Roughness
0.0159, !- Thickness {m}
0.12, !- Conductivity {W/m-K}
544, !- Density {kg/m3}
1210; !- Specific Heat {J/kg-K}
Material,
M14 150mm heavyweight concrete roof, !- Name
MediumRough, !- Roughness
0.1524, !- Thickness {m}
2.31, !- Conductivity {W/m-K}
2322, !- Density {kg/m3}
832; !- Specific Heat {J/kg-K}
Material,
100mm Normalweight concrete wall, !- Name - based on 90.1-2004 Appendix-Table A3-1B
MediumRough, !- Roughness
0.1016, !- Thickness {m}
2.31, !- Conductivity {W/m-K}
2322, !- Density {kg/m3}
832; !- Specific Heat {J/kg-K}
Material,
200mm Normalweight concrete wall, !- Name - based on 90.1-2004 Appendix-Table A3-1B
MediumRough, !- Roughness
0.2032, !- Thickness {m}
2.31, !- Conductivity {W/m-K}
2322, !- Density {kg/m3}
832; !- Specific Heat {J/kg-K}
Material,
100mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B
MediumRough, !- Roughness
0.1016, !- Thickness {m}
2.31, !- Conductivity {W/m-K}
2322, !- Density {kg/m3}
832; !- Specific Heat {J/kg-K}
Material,
150mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B
MediumRough, !- Roughness
0.1524, !- Thickness {m}
2.31, !- Conductivity {W/m-K}
2322, !- Density {kg/m3}
832; !- Specific Heat {J/kg-K}
Material,
200mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B
MediumRough, !- Roughness
0.2032, !- Thickness {m}
2.31, !- Conductivity {W/m-K}
2322, !- Density {kg/m3}
832; !- Specific Heat {J/kg-K}
Material,
M10 200mm concrete block wall, !- Name
MediumRough, !- Roughness
0.2032, !- Thickness {m}
0.72, !- Conductivity {W/m-K}
800, !- Density {kg/m3}
832; !- Specific Heat {J/kg-K}
Material,
M10 200mm concrete block basement wall, !- Name
MediumRough, !- Roughness
0.2032, !- Thickness {m}
1.326, !- Conductivity {W/m-K}
1842, !- Density {kg/m3}
912; !- Specific Heat {J/kg-K}
Material:NoMass,
CP02 CARPET PAD, !- Name
VeryRough, !- Roughness
0.21648, !- Thermal Resistance {m2-K/W}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.8; !- Visible Absorptance
Material:NoMass,
Air_Wall_Material, !- Name
Rough, !- Roughness
0.2079491, !- Thermal Resistance {m2-K/W}
0.9, !- Thermal Absorptance
0.7; !- Solar Absorptance
Material:NoMass,
Nonres_Roof_Insulation, !- Name
MediumSmooth, !- Roughness
8.09838681889561,
!- Thermal Resistance {m2-K/W}
0.9, !- Absorptance:Thermal
0.7, !- Absorptance:Solar
0.7; !- Absorptance:Visible
Material:NoMass,
Res_Roof_Insulation, !- Name
MediumSmooth, !- Roughness
0.0299387330245182,
!- Thermal Resistance {m2-K/W}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.7; !- Visible Absorptance
Material:NoMass,
Semiheated_Roof_Insulation, !- Name
MediumSmooth, !- Roughness
0.0299387330245182,
!- Thermal Resistance {m2-K/W}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.7; !- Visible Absorptance
Material:NoMass,
Nonres_Exterior_Wall_Insulation, !- Name
MediumSmooth, !- Roughness
3.06941962105791,
!- Thermal Resistance {m2-K/W}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.7; !- Visible Absorptance
Material:NoMass,
Res_Exterior_Wall_Insulation, !- Name
MediumSmooth, !- Roughness
0.0299387330245182,
!- Thermal Resistance {m2-K/W}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.7; !- Visible Absorptance
Material:NoMass,
Semiheated_Exterior_Wall_Insulation, !- Name
MediumSmooth, !- Roughness
0.0299387330245182,
!- Thermal Resistance {m2-K/W}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.7; !- Visible Absorptance
Material:NoMass,
Nonres_Floor_Insulation, !- Name
MediumSmooth, !- Roughness
0.0299387330245182,
!- Thermal Resistance {m2-K/W}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.7; !- Visible Absorptance
Material:NoMass,
Res_Floor_Insulation, !- Name
MediumSmooth, !- Roughness
0.0299387330245182,
!- Thermal Resistance {m2-K/W}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.7; !- Visible Absorptance
Material:NoMass,
Semiheated_Floor_Insulation, !- Name
MediumSmooth, !- Roughness
0.0299387330245182,
!- Thermal Resistance {m2-K/W}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.7; !- Visible Absorptance
Material:NoMass,
Std Opaque Door Panel, !- Name
MediumRough, !- Roughness
0.123456790123457, !- (corresponds to default RSI-0.12327 or R-0.7) Thermal Resistance {m2-K/W}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.7; !- Visible Absorptance
!- =========== ALL OBJECTS IN CLASS: CONSTRUCTION ===========
Construction,
InteriorFurnishings, !- Name
Std Wood 6inch; !- Outside Layer
Construction,
Air_Wall, !- Name
Air_Wall_Material; !- Outside Layer
Construction,
DropCeiling, !- Name
AC02 Acoustic Ceiling; !- Outside Layer
Construction,
OpaqueDoor, !- Name
Std Opaque Door Panel; !- Outside Layer
Construction,
AtticRoofDeck, !- Name
F12 Asphalt shingles, !- Outside Layer
G02 16mm plywood; !- Layer 2
Construction,
int_wall, !- Name
G01 13mm gypsum board, !- Outside Layer
G01 13mm gypsum board; !- Layer 2
Construction,
ext_slab_8in_with_carpet,!- Name
200mm Normalweight concrete floor, !- Outside Layer
CP02 CARPET PAD; !- Layer 2
Construction,
ext_slab_8in, !- Name
200mm Normalweight concrete floor; !- Outside Layer
Construction,
ext_slab_6in_with_carpet,!- Name
150mm Normalweight concrete floor, !- Outside Layer
CP02 CARPET PAD; !- Layer 2
Construction,
ext_slab_6in, !- Name
150mm Normalweight concrete floor; !- Outside Layer
Construction,
int_slab_floor, !- Name
100mm Normalweight concrete floor, !- Outside Layer
CP02 CARPET PAD; !- Layer 2
Construction,
int_slab_ceiling, !- Name
CP02 CARPET PAD, !- Outside Layer
100mm Normalweight concrete floor; !- Layer 2
Construction,
basement_wall, !- Name
M10 200mm concrete block basement wall; !- Outside Layer
Construction,
int_wood_floor, !- Name
AC02 Acoustic Ceiling, !- Outside Layer
G02 16mm plywood, !- Layer 2
CP02 CARPET PAD; !- Layer 3
Construction,
ext_soffit_floor, !- Name
G02 16mm plywood; !- Outside Layer
Construction,
nonres_roof, !- Name
Nonres_Roof_Insulation, !- Outside Layer
G01 16mm gypsum board; !- Layer #2
Construction,
res_roof, !- Name
Res_Roof_Insulation, !- Outside Layer
G01 16mm gypsum board; !- Layer #2
Construction,
semiheated_roof, !- Name
Semiheated_Roof_Insulation, !- Outside Layer
G01 16mm gypsum board; !- Layer #2
Construction,
nonres_roof_floor, !- Name - Other side zone surface definition for nonres_roof
G01 16mm gypsum board, !- Outside Layer
Nonres_Roof_Insulation; !- Layer #2
Construction,
res_roof_floor, !- Name - Other side zone surface definition for res_roof
G01 16mm gypsum board, !- Outside Layer
Res_Roof_Insulation; !- Layer #2
Construction,
semiheated_roof_floor, !- Name - Other side zone surface definition for semiheated_roof
G01 16mm gypsum board, !- Outside Layer
Semiheated_Roof_Insulation; !- Layer #2
Construction,
nonres_ext_wall, !- Name
F07 25mm stucco, !- Outside Layer
G01 16mm gypsum board, !- Layer #2
Nonres_Exterior_Wall_Insulation, !- Layer #3
G01 16mm gypsum board; !- Layer #4
Construction,
res_ext_wall, !- Name
F07 25mm stucco, !- Outside Layer
G01 16mm gypsum board, !- Layer #1
Res_Exterior_Wall_Insulation, !- Layer #2
G01 16mm gypsum board; !- Layer #3
Construction,
semiheated_ext_wall, !- Name
F07 25mm stucco, !- Outside Layer
G01 16mm gypsum board, !- Layer #1
Semiheated_Exterior_Wall_Insulation, !- Layer #2
G01 16mm gypsum board; !- Layer #3
Construction,
nonres_floor, !- Name
Nonres_Floor_Insulation, !- Outside Layer
100mm Normalweight concrete floor, !- Layer #1
CP02 CARPET PAD; !- Layer #2
Construction,
res_floor, !- Name
Res_Floor_Insulation, !- Outside Layer
100mm Normalweight concrete floor, !- Layer #1
CP02 CARPET PAD; !- Layer #2
Construction,
semiheated_floor, !- Name
Semiheated_Floor_Insulation, !- Outside Layer
100mm Normalweight concrete floor, !- Layer #1
CP02 CARPET PAD; !- Layer #2
Construction,
nonres_floor_ceiling, !- Name - reverse ordered layers for nonres_floor
CP02 CARPET PAD, !- Outside Layer
100mm Normalweight concrete floor, !- Layer #1
Nonres_Floor_Insulation; !- Layer #2
Construction,
res_floor_ceiling, !- Name - reverse ordered layers for res_floor
CP02 CARPET PAD, !- Outside Layer
100mm Normalweight concrete floor, !- Layer #1
Res_Floor_Insulation; !- Layer #2
Construction,
semiheated_floor_ceiling, !- Name - reverse ordered layers for semiheated_floor
CP02 CARPET PAD, !- Outside Layer
100mm Normalweight concrete floor, !- Layer #1
Semiheated_Floor_Insulation; !- Layer #2
!- =========== ALL OBJECTS IN CLASS: WINDOWMATERIAL:SIMPLEGLAZINGSYSTEM ===========
WindowMaterial:SimpleGlazingSystem,
Glazing Layer, !- Name
2.0441736, !- U-Factor {W/m2-K}
0.38, !- Solar Heat Gain Coefficient
0.418; !- Visible Transmittance
Construction,
Window_U_0.36_SHGC_0.38, !- Name
Glazing Layer; !- Outside Layer
!- =========== ALL OBJECTS IN CLASS: GLOBALGEOMETRYRULES ===========
GlobalGeometryRules,
UpperLeftCorner, !- Starting Vertex Position
Counterclockwise, !- Vertex Entry Direction
Relative, !- Coordinate System
Relative; !- Daylighting Reference Point Coordinate System
Construction:FfactorGroundFloor,
Core_ZN_floor_Ffactor, !- Name
0.90012, !- F-Factor
149.65740000000005, !- Area
0; !- PerimeterExposed
Construction:FfactorGroundFloor,
Perimeter_ZN_1_floor_Ffactor, !- Name
0.90012, !- F-Factor
113.45000000000002, !- Area
27.69; !- PerimeterExposed
Construction:FfactorGroundFloor,
Perimeter_ZN_2_floor_Ffactor, !- Name
0.90012, !- F-Factor
67.29999999999995, !- Area
18.46; !- PerimeterExposed
Construction:FfactorGroundFloor,
Perimeter_ZN_3_floor_Ffactor, !- Name
0.90012, !- F-Factor
113.44999999999999, !- Area
27.69; !- PerimeterExposed
Construction:FfactorGroundFloor,
Perimeter_ZN_4_floor_Ffactor, !- Name
0.90012, !- F-Factor
67.30000000000001, !- Area
18.46; !- PerimeterExposed
!- =========== ALL OBJECTS IN CLASS: ZONE ===========
Zone,
Core_ZN, !- Name
0.0000, !- Direction of Relative North {deg}
0.0000, !- X Origin {m}
0.0000, !- Y Origin {m}
0.0000, !- Z Origin {m}
1, !- Type
1.0000, !- Multiplier
autocalculate, !- Ceiling Height {m}
autocalculate, !- Volume {m3}
autocalculate, !- Floor Area {m2}
, !- Zone Inside Convection Algorithm
, !- Zone Outside Convection Algorithm
Yes; !- Part of Total Floor Area
Zone,
Perimeter_ZN_1, !- Name
0.0000, !- Direction of Relative North {deg}
0.0000, !- X Origin {m}
0.0000, !- Y Origin {m}
0.0000, !- Z Origin {m}
1, !- Type
1.0000, !- Multiplier
autocalculate, !- Ceiling Height {m}
autocalculate, !- Volume {m3}
autocalculate, !- Floor Area {m2}
, !- Zone Inside Convection Algorithm
, !- Zone Outside Convection Algorithm
Yes; !- Part of Total Floor Area
Zone,
Perimeter_ZN_2, !- Name
0.0000, !- Direction of Relative North {deg}
0.0000, !- X Origin {m}
0.0000, !- Y Origin {m}
0.0000, !- Z Origin {m}
1, !- Type
1.0000, !- Multiplier
autocalculate, !- Ceiling Height {m}
autocalculate, !- Volume {m3}
autocalculate, !- Floor Area {m2}
, !- Zone Inside Convection Algorithm
, !- Zone Outside Convection Algorithm
Yes; !- Part of Total Floor Area
Zone,
Perimeter_ZN_3, !- Name
0.0000, !- Direction of Relative North {deg}
0.0000, !- X Origin {m}
0.0000, !- Y Origin {m}
0.0000, !- Z Origin {m}
1, !- Type
1.0000, !- Multiplier
autocalculate, !- Ceiling Height {m}
autocalculate, !- Volume {m3}
autocalculate, !- Floor Area {m2}
, !- Zone Inside Convection Algorithm
, !- Zone Outside Convection Algorithm
Yes; !- Part of Total Floor Area
Zone,
Perimeter_ZN_4, !- Name
0.0000, !- Direction of Relative North {deg}
0.0000, !- X Origin {m}
0.0000, !- Y Origin {m}
0.0000, !- Z Origin {m}
1, !- Type
1.0000, !- Multiplier
autocalculate, !- Ceiling Height {m}
autocalculate, !- Volume {m3}
autocalculate, !- Floor Area {m2}
, !- Zone Inside Convection Algorithm
, !- Zone Outside Convection Algorithm
Yes; !- Part of Total Floor Area
Zone,
Attic, !- Name
0.0000, !- Direction of Relative North {deg}
0.0000, !- X Origin {m}
0.0000, !- Y Origin {m}
0.0000, !- Z Origin {m}
1, !- Type
1.0000, !- Multiplier
autocalculate, !- Ceiling Height {m}
autocalculate, !- Volume {m3}
autocalculate, !- Floor Area {m2}
, !- Zone Inside Convection Algorithm
, !- Zone Outside Convection Algorithm
No; !- Part of Total Floor Area
!- =========== ALL OBJECTS IN CLASS: BUILDINGSURFACE:DETAILED ===========
BuildingSurface:Detailed,
Core_ZN_floor, !- Name
Floor, !- Surface Type
Core_ZN_floor_Ffactor, !- Construction Name
Core_ZN, !- Zone Name
Adiabatic, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
5.0000,13.4600,0.0000, !- X,Y,Z ==> Vertex 1 {m}
22.6900,13.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
22.6900,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
5.0000,5.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Core_ZN_wall_south, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
Core_ZN, !- Zone Name
Surface, !- Outside Boundary Condition
Perimeter_ZN_1_wall_north, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
5.0000,5.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m}
5.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
22.6900,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
22.6900,5.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Core_ZN_wall_east, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
Core_ZN, !- Zone Name
Surface, !- Outside Boundary Condition
Perimeter_ZN_2_wall_west,!- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
22.6900,5.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m}
22.6900,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
22.6900,13.4600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
22.6900,13.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Core_ZN_wall_north, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
Core_ZN, !- Zone Name
Surface, !- Outside Boundary Condition
Perimeter_ZN_3_wall_south, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
22.6900,13.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m}
22.6900,13.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
5.0000,13.4600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
5.0000,13.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Core_ZN_ceiling, !- Name
Ceiling, !- Surface Type
nonres_roof, !- Construction Name
Core_ZN, !- Zone Name
Surface, !- Outside Boundary Condition
Attic_floor_core, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
22.6900,13.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m}
5.0000,13.4600,3.0500, !- X,Y,Z ==> Vertex 2 {m}
5.0000,5.0000,3.0500, !- X,Y,Z ==> Vertex 3 {m}
22.6900,5.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Core_ZN_wall_west, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
Core_ZN, !- Zone Name
Surface, !- Outside Boundary Condition
Perimeter_ZN_4_wall_east,!- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
5.0000,13.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m}
5.0000,13.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
5.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
5.0000,5.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Perimeter_ZN_1_floor, !- Name
Floor, !- Surface Type
Perimeter_ZN_1_floor_Ffactor, !- Construction Name
Perimeter_ZN_1, !- Zone Name
GroundFCfactorMethod, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
27.6900,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
5.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
22.6900,5.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Perimeter_ZN_1_wall_west,!- Name
Wall, !- Surface Type
int_wall, !- Construction Name
Perimeter_ZN_1, !- Zone Name
Surface, !- Outside Boundary Condition
Perimeter_ZN_4_wall_south, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
5.0000,5.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m}
5.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
0.0000,0.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Perimeter_ZN_1_wall_south, !- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
Perimeter_ZN_1, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
0.0000,0.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m}
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
27.6900,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
27.6900,0.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Perimeter_ZN_1_ceiling, !- Name
Ceiling, !- Surface Type
nonres_roof, !- Construction Name
Perimeter_ZN_1, !- Zone Name
Surface, !- Outside Boundary Condition
Attic_floor_perimeter_south, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
0.0000,0.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m}
27.6900,0.0000,3.0500, !- X,Y,Z ==> Vertex 2 {m}
22.6900,5.0000,3.0500, !- X,Y,Z ==> Vertex 3 {m}
5.0000,5.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Perimeter_ZN_1_wall_east,!- Name
Wall, !- Surface Type
int_wall, !- Construction Name
Perimeter_ZN_1, !- Zone Name
Surface, !- Outside Boundary Condition
Perimeter_ZN_2_wall_south, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
27.6900,0.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m}
27.6900,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
22.6900,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
22.6900,5.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Perimeter_ZN_1_wall_north, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
Perimeter_ZN_1, !- Zone Name
Surface, !- Outside Boundary Condition
Core_ZN_wall_south, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
22.6900,5.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m}
22.6900,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
5.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
5.0000,5.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Perimeter_ZN_2_floor, !- Name
Floor, !- Surface Type
Perimeter_ZN_2_floor_Ffactor, !- Construction Name
Perimeter_ZN_2, !- Zone Name
GroundFCfactorMethod, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
22.6900,13.4600,0.0000, !- X,Y,Z ==> Vertex 1 {m}
27.6900,18.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
27.6900,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
22.6900,5.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Perimeter_ZN_2_wall_east,!- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
Perimeter_ZN_2, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
27.6900,0.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m}
27.6900,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
27.6900,18.4600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
27.6900,18.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Perimeter_ZN_2_wall_north, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
Perimeter_ZN_2, !- Zone Name
Surface, !- Outside Boundary Condition
Perimeter_ZN_3_wall_east,!- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
27.6900,18.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m}
27.6900,18.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
22.6900,13.4600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
22.6900,13.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Perimeter_ZN_2_ceiling, !- Name
Ceiling, !- Surface Type
nonres_roof, !- Construction Name
Perimeter_ZN_2, !- Zone Name
Surface, !- Outside Boundary Condition
Attic_floor_perimeter_east, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
27.6900,18.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m}
22.6900,13.4600,3.0500, !- X,Y,Z ==> Vertex 2 {m}
22.6900,5.0000,3.0500, !- X,Y,Z ==> Vertex 3 {m}
27.6900,0.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Perimeter_ZN_2_wall_south, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
Perimeter_ZN_2, !- Zone Name
Surface, !- Outside Boundary Condition
Perimeter_ZN_1_wall_east,!- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
22.6900,5.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m}
22.6900,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
27.6900,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
27.6900,0.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Perimeter_ZN_2_wall_west,!- Name
Wall, !- Surface Type
int_wall, !- Construction Name
Perimeter_ZN_2, !- Zone Name
Surface, !- Outside Boundary Condition
Core_ZN_wall_east, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
22.6900,13.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m}
22.6900,13.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
22.6900,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
22.6900,5.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Perimeter_ZN_3_floor, !- Name
Floor, !- Surface Type
Perimeter_ZN_3_floor_Ffactor, !- Construction Name
Perimeter_ZN_3, !- Zone Name
GroundFCfactorMethod, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
5.0000,13.4600,0.0000, !- X,Y,Z ==> Vertex 1 {m}
0.0000,18.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
27.6900,18.4600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
22.6900,13.4600,0.0000; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Perimeter_ZN_3_wall_south, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
Perimeter_ZN_3, !- Zone Name
Surface, !- Outside Boundary Condition
Core_ZN_wall_north, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
5.0000,13.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m}
5.0000,13.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
22.6900,13.4600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
22.6900,13.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Perimeter_ZN_3_wall_west,!- Name
Wall, !- Surface Type
int_wall, !- Construction Name
Perimeter_ZN_3, !- Zone Name
Surface, !- Outside Boundary Condition
Perimeter_ZN_4_wall_north, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
0.0000,18.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m}
0.0000,18.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
5.0000,13.4600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
5.0000,13.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Perimeter_ZN_3_ceiling, !- Name
Ceiling, !- Surface Type
nonres_roof, !- Construction Name
Perimeter_ZN_3, !- Zone Name
Surface, !- Outside Boundary Condition
Attic_floor_perimeter_north, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
0.0000,18.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m}
5.0000,13.4600,3.0500, !- X,Y,Z ==> Vertex 2 {m}
22.6900,13.4600,3.0500, !- X,Y,Z ==> Vertex 3 {m}
27.6900,18.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Perimeter_ZN_3_wall_north, !- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
Perimeter_ZN_3, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
27.6900,18.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m}
27.6900,18.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
0.0000,18.4600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
0.0000,18.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Perimeter_ZN_3_wall_east,!- Name
Wall, !- Surface Type
int_wall, !- Construction Name
Perimeter_ZN_3, !- Zone Name
Surface, !- Outside Boundary Condition
Perimeter_ZN_2_wall_north, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
22.6900,13.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m}
22.6900,13.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
27.6900,18.4600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
27.6900,18.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Perimeter_ZN_4_floor, !- Name
Floor, !- Surface Type
Perimeter_ZN_4_floor_Ffactor, !- Construction Name
Perimeter_ZN_4, !- Zone Name
GroundFCfactorMethod, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
5.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
0.0000,18.4600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
5.0000,13.4600,0.0000; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Perimeter_ZN_4_wall_south, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
Perimeter_ZN_4, !- Zone Name
Surface, !- Outside Boundary Condition
Perimeter_ZN_1_wall_west,!- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
0.0000,0.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m}
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
5.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
5.0000,5.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Perimeter_ZN_4_ceiling, !- Name
Ceiling, !- Surface Type
nonres_roof, !- Construction Name
Perimeter_ZN_4, !- Zone Name
Surface, !- Outside Boundary Condition
Attic_floor_perimeter_west, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
0.0000,0.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m}
5.0000,5.0000,3.0500, !- X,Y,Z ==> Vertex 2 {m}
5.0000,13.4600,3.0500, !- X,Y,Z ==> Vertex 3 {m}
0.0000,18.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Perimeter_ZN_4_wall_north, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
Perimeter_ZN_4, !- Zone Name
Surface, !- Outside Boundary Condition
Perimeter_ZN_3_wall_west,!- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
5.0000,13.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m}
5.0000,13.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
0.0000,18.4600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
0.0000,18.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Perimeter_ZN_4_wall_east,!- Name
Wall, !- Surface Type
int_wall, !- Construction Name
Perimeter_ZN_4, !- Zone Name
Surface, !- Outside Boundary Condition
Core_ZN_wall_west, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
5.0000,5.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m}
5.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
5.0000,13.4600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
5.0000,13.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Perimeter_ZN_4_wall_west,!- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
Perimeter_ZN_4, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
0.0000,18.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m}
0.0000,18.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
0.0000,0.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Attic_soffit_west, !- Name
Floor, !- Surface Type
ext_soffit_floor, !- Construction Name
Attic, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
-0.6000,19.0600,3.0500, !- X,Y,Z ==> Vertex 1 {m}
0.0000,18.4600,3.0500, !- X,Y,Z ==> Vertex 2 {m}
0.0000,0.0000,3.0500, !- X,Y,Z ==> Vertex 3 {m}
-0.6000,-0.6000,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Attic_soffit_south, !- Name
Floor, !- Surface Type
ext_soffit_floor, !- Construction Name
Attic, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
0.0000,0.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m}
27.6900,0.0000,3.0500, !- X,Y,Z ==> Vertex 2 {m}
28.2900,-0.6000,3.0500, !- X,Y,Z ==> Vertex 3 {m}
-0.6000,-0.6000,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Attic_soffit_east, !- Name
Floor, !- Surface Type
ext_soffit_floor, !- Construction Name
Attic, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
28.2900,19.0600,3.0500, !- X,Y,Z ==> Vertex 1 {m}
28.2900,-0.6000,3.0500, !- X,Y,Z ==> Vertex 2 {m}
27.6900,0.0000,3.0500, !- X,Y,Z ==> Vertex 3 {m}
27.6900,18.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Attic_floor_perimeter_south, !- Name
Floor, !- Surface Type
nonres_roof_floor, !- Construction Name
Attic, !- Zone Name
Surface, !- Outside Boundary Condition
Perimeter_ZN_1_ceiling, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
0.0000,0.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m}
5.0000,5.0000,3.0500, !- X,Y,Z ==> Vertex 2 {m}
22.6900,5.0000,3.0500, !- X,Y,Z ==> Vertex 3 {m}
27.6900,0.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Attic_floor_perimeter_west, !- Name
Floor, !- Surface Type
nonres_roof_floor, !- Construction Name
Attic, !- Zone Name
Surface, !- Outside Boundary Condition
Perimeter_ZN_4_ceiling, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
5.0000,13.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m}
5.0000,5.0000,3.0500, !- X,Y,Z ==> Vertex 2 {m}
0.0000,0.0000,3.0500, !- X,Y,Z ==> Vertex 3 {m}
0.0000,18.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Attic_floor_perimeter_east, !- Name
Floor, !- Surface Type
nonres_roof_floor, !- Construction Name
Attic, !- Zone Name
Surface, !- Outside Boundary Condition
Perimeter_ZN_2_ceiling, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
22.6900,5.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m}
22.6900,13.4600,3.0500, !- X,Y,Z ==> Vertex 2 {m}
27.6900,18.4600,3.0500, !- X,Y,Z ==> Vertex 3 {m}
27.6900,0.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Attic_floor_core, !- Name
Floor, !- Surface Type
nonres_roof_floor, !- Construction Name
Attic, !- Zone Name
Surface, !- Outside Boundary Condition
Core_ZN_ceiling, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
5.0000,13.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m}
22.6900,13.4600,3.0500, !- X,Y,Z ==> Vertex 2 {m}
22.6900,5.0000,3.0500, !- X,Y,Z ==> Vertex 3 {m}
5.0000,5.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Attic_floor_perimeter_north, !- Name
Floor, !- Surface Type
nonres_roof_floor, !- Construction Name
Attic, !- Zone Name
Surface, !- Outside Boundary Condition
Perimeter_ZN_3_ceiling, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
0.0000,18.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m}
27.6900,18.4600,3.0500, !- X,Y,Z ==> Vertex 2 {m}
22.6900,13.4600,3.0500, !- X,Y,Z ==> Vertex 3 {m}
5.0000,13.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Attic_soffit_north, !- Name
Floor, !- Surface Type
ext_soffit_floor, !- Construction Name
Attic, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
-0.6000,19.0600,3.0500, !- X,Y,Z ==> Vertex 1 {m}
28.2900,19.0600,3.0500, !- X,Y,Z ==> Vertex 2 {m}
27.6900,18.4600,3.0500, !- X,Y,Z ==> Vertex 3 {m}
0.0000,18.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Attic_roof_north, !- Name
Roof, !- Surface Type
AtticRoofDeck, !- Construction Name
Attic, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
28.2900,19.0600,3.0500, !- X,Y,Z ==> Vertex 1 {m}
-0.6000,19.0600,3.0500, !- X,Y,Z ==> Vertex 2 {m}
9.2300,9.2300,6.3300, !- X,Y,Z ==> Vertex 3 {m}
18.4600,9.2300,6.3300; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Attic_roof_west, !- Name
Roof, !- Surface Type
AtticRoofDeck, !- Construction Name
Attic, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
3, !- Number of Vertices
-0.6000,19.0600,3.0500, !- X,Y,Z ==> Vertex 1 {m}
-0.6000,-0.6000,3.0500, !- X,Y,Z ==> Vertex 2 {m}
9.2300,9.2300,6.3300; !- X,Y,Z ==> Vertex 3 {m}
BuildingSurface:Detailed,
Attic_roof_east, !- Name
Roof, !- Surface Type
AtticRoofDeck, !- Construction Name
Attic, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
3, !- Number of Vertices
28.2900,-0.6000,3.0500, !- X,Y,Z ==> Vertex 1 {m}
28.2900,19.0600,3.0500, !- X,Y,Z ==> Vertex 2 {m}
18.4600,9.2300,6.3300; !- X,Y,Z ==> Vertex 3 {m}
BuildingSurface:Detailed,
Attic_roof_south, !- Name
Roof, !- Surface Type
AtticRoofDeck, !- Construction Name
Attic, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
-0.6000,-0.6000,3.0500, !- X,Y,Z ==> Vertex 1 {m}
28.2900,-0.6000,3.0500, !- X,Y,Z ==> Vertex 2 {m}
18.4600,9.2300,6.3300, !- X,Y,Z ==> Vertex 3 {m}
9.2300,9.2300,6.3300; !- X,Y,Z ==> Vertex 4 {m}
!- =========== ALL OBJECTS IN CLASS: FENESTRATIONSURFACE:DETAILED ===========
FenestrationSurface:Detailed,
Perimeter_ZN_1_wall_south_Window_1, !- Name
Window, !- Surface Type
Window_U_0.36_SHGC_0.38, !- Construction Name
Perimeter_ZN_1_wall_south, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
1.390,0.0000,2.4240, !- X,Y,Z ==> Vertex 1 {m}
1.390,0.0000,0.9000, !- X,Y,Z ==> Vertex 2 {m}
3.220,0.0000,0.9000, !- X,Y,Z ==> Vertex 3 {m}
3.220,0.0000,2.4240; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Perimeter_ZN_1_wall_south_Window_2, !- Name
Window, !- Surface Type
Window_U_0.36_SHGC_0.38, !- Construction Name
Perimeter_ZN_1_wall_south, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
6.010,0.0000,2.4240, !- X,Y,Z ==> Vertex 1 {m}
6.010,0.0000,0.9000, !- X,Y,Z ==> Vertex 2 {m}
7.840,0.0000,0.9000, !- X,Y,Z ==> Vertex 3 {m}
7.840,0.0000,2.4240; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Perimeter_ZN_1_wall_south_Window_3, !- Name
Window, !- Surface Type
Window_U_0.36_SHGC_0.38, !- Construction Name
Perimeter_ZN_1_wall_south, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
10.620,0.0000,2.4240, !- X,Y,Z ==> Vertex 1 {m}
10.620,0.0000,0.9000, !- X,Y,Z ==> Vertex 2 {m}
12.450,0.0000,0.9000, !- X,Y,Z ==> Vertex 3 {m}
12.450,0.0000,2.4240; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Perimeter_ZN_1_wall_south_Window_4, !- Name
Window, !- Surface Type
Window_U_0.36_SHGC_0.38, !- Construction Name
Perimeter_ZN_1_wall_south, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
15.240,0.0000,2.4240, !- X,Y,Z ==> Vertex 1 {m}
15.240,0.0000,0.9000, !- X,Y,Z ==> Vertex 2 {m}
17.070,0.0000,0.9000, !- X,Y,Z ==> Vertex 3 {m}
17.070,0.0000,2.4240; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Perimeter_ZN_1_wall_south_Window_5, !- Name
Window, !- Surface Type
Window_U_0.36_SHGC_0.38, !- Construction Name
Perimeter_ZN_1_wall_south, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
19.850,0.0000,2.4240, !- X,Y,Z ==> Vertex 1 {m}
19.850,0.0000,0.9000, !- X,Y,Z ==> Vertex 2 {m}
21.680,0.0000,0.9000, !- X,Y,Z ==> Vertex 3 {m}
21.680,0.0000,2.4240; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Perimeter_ZN_1_wall_south_Window_6, !- Name
Window, !- Surface Type
Window_U_0.36_SHGC_0.38, !- Construction Name
Perimeter_ZN_1_wall_south, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
24.470,0.0000,2.4240, !- X,Y,Z ==> Vertex 1 {m}
24.470,0.0000,0.9000, !- X,Y,Z ==> Vertex 2 {m}
26.300,0.0000,0.9000, !- X,Y,Z ==> Vertex 3 {m}
26.300,0.0000,2.4240; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Perimeter_ZN_1_wall_south_door, !- Name
GlassDoor, !- Surface Type
Window_U_0.36_SHGC_0.38, !- Construction Name
Perimeter_ZN_1_wall_south, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
12.930,0.0000,2.1340, !- X,Y,Z ==> Vertex 1 {m}
12.930,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
14.760,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
14.760,0.0000,2.1340; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Perimeter_ZN_2_wall_east_Window_4, !- Name
Window, !- Surface Type
Window_U_0.36_SHGC_0.38, !- Construction Name
Perimeter_ZN_2_wall_east,!- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
27.690,15.2400,2.4240, !- X,Y,Z ==> Vertex 1 {m}
27.690,15.2400,0.9000, !- X,Y,Z ==> Vertex 2 {m}
27.690,17.0700,0.9000, !- X,Y,Z ==> Vertex 3 {m}
27.690,17.0700,2.4240; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Perimeter_ZN_2_wall_east_Window_3, !- Name
Window, !- Surface Type
Window_U_0.36_SHGC_0.38, !- Construction Name
Perimeter_ZN_2_wall_east,!- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
27.690,10.6200,2.4240, !- X,Y,Z ==> Vertex 1 {m}
27.690,10.6200,0.9000, !- X,Y,Z ==> Vertex 2 {m}
27.690,12.4500,0.9000, !- X,Y,Z ==> Vertex 3 {m}
27.690,12.4500,2.4240; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Perimeter_ZN_2_wall_east_Window_2, !- Name
Window, !- Surface Type
Window_U_0.36_SHGC_0.38, !- Construction Name
Perimeter_ZN_2_wall_east,!- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
27.690,6.0100,2.4240, !- X,Y,Z ==> Vertex 1 {m}
27.690,6.0100,0.9000, !- X,Y,Z ==> Vertex 2 {m}
27.690,7.8400,0.9000, !- X,Y,Z ==> Vertex 3 {m}
27.690,7.8400,2.4240; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Perimeter_ZN_2_wall_east_Window_1, !- Name
Window, !- Surface Type
Window_U_0.36_SHGC_0.38, !- Construction Name
Perimeter_ZN_2_wall_east,!- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
27.690,1.3900,2.4240, !- X,Y,Z ==> Vertex 1 {m}
27.690,1.3900,0.9000, !- X,Y,Z ==> Vertex 2 {m}
27.690,3.2200,0.9000, !- X,Y,Z ==> Vertex 3 {m}
27.690,3.2200,2.4240; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Perimeter_ZN_3_wall_north_Window_1, !- Name
Window, !- Surface Type
Window_U_0.36_SHGC_0.38, !- Construction Name
Perimeter_ZN_3_wall_north, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
26.300,18.4600,2.4240, !- X,Y,Z ==> Vertex 1 {m}
26.300,18.4600,0.9000, !- X,Y,Z ==> Vertex 2 {m}
24.470,18.4600,0.9000, !- X,Y,Z ==> Vertex 3 {m}
24.470,18.4600,2.4240; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Perimeter_ZN_3_wall_north_Window_2, !- Name
Window, !- Surface Type
Window_U_0.36_SHGC_0.38, !- Construction Name
Perimeter_ZN_3_wall_north, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
21.680,18.4600,2.4240, !- X,Y,Z ==> Vertex 1 {m}
21.680,18.4600,0.9000, !- X,Y,Z ==> Vertex 2 {m}
19.850,18.4600,0.9000, !- X,Y,Z ==> Vertex 3 {m}
19.850,18.4600,2.4240; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Perimeter_ZN_3_wall_north_Window_3, !- Name
Window, !- Surface Type
Window_U_0.36_SHGC_0.38, !- Construction Name
Perimeter_ZN_3_wall_north, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
17.070,18.4600,2.4240, !- X,Y,Z ==> Vertex 1 {m}
17.070,18.4600,0.9000, !- X,Y,Z ==> Vertex 2 {m}
15.240,18.4600,0.9000, !- X,Y,Z ==> Vertex 3 {m}
15.240,18.4600,2.4240; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Perimeter_ZN_3_wall_north_Window_4, !- Name
Window, !- Surface Type
Window_U_0.36_SHGC_0.38, !- Construction Name
Perimeter_ZN_3_wall_north, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
12.450,18.4600,2.4240, !- X,Y,Z ==> Vertex 1 {m}
12.450,18.4600,0.9000, !- X,Y,Z ==> Vertex 2 {m}
10.620,18.4600,0.9000, !- X,Y,Z ==> Vertex 3 {m}
10.620,18.4600,2.4240; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Perimeter_ZN_3_wall_north_Window_5, !- Name
Window, !- Surface Type
Window_U_0.36_SHGC_0.38, !- Construction Name
Perimeter_ZN_3_wall_north, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
7.840,18.4600,2.4240, !- X,Y,Z ==> Vertex 1 {m}
7.840,18.4600,0.9000, !- X,Y,Z ==> Vertex 2 {m}
6.010,18.4600,0.9000, !- X,Y,Z ==> Vertex 3 {m}
6.010,18.4600,2.4240; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Perimeter_ZN_3_wall_north_Window_6, !- Name
Window, !- Surface Type
Window_U_0.36_SHGC_0.38, !- Construction Name
Perimeter_ZN_3_wall_north, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
3.220,18.4600,2.4240, !- X,Y,Z ==> Vertex 1 {m}
3.220,18.4600,0.9000, !- X,Y,Z ==> Vertex 2 {m}
1.390,18.4600,0.9000, !- X,Y,Z ==> Vertex 3 {m}
1.390,18.4600,2.4240; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Perimeter_ZN_4_wall_west_Window_4, !- Name
Window, !- Surface Type
Window_U_0.36_SHGC_0.38, !- Construction Name
Perimeter_ZN_4_wall_west,!- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
0.000,3.2200,2.4240, !- X,Y,Z ==> Vertex 1 {m}
0.000,3.2200,0.9000, !- X,Y,Z ==> Vertex 2 {m}
0.000,1.3900,0.9000, !- X,Y,Z ==> Vertex 3 {m}
0.000,1.3900,2.4240; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Perimeter_ZN_4_wall_west_Window_3, !- Name
Window, !- Surface Type
Window_U_0.36_SHGC_0.38, !- Construction Name
Perimeter_ZN_4_wall_west,!- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
0.000,7.8400,2.4240, !- X,Y,Z ==> Vertex 1 {m}
0.000,7.8400,0.9000, !- X,Y,Z ==> Vertex 2 {m}
0.000,6.0100,0.9000, !- X,Y,Z ==> Vertex 3 {m}
0.000,6.0100,2.4240; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Perimeter_ZN_4_wall_west_Window_2, !- Name
Window, !- Surface Type
Window_U_0.36_SHGC_0.38, !- Construction Name
Perimeter_ZN_4_wall_west,!- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
0.000,12.4500,2.4240, !- X,Y,Z ==> Vertex 1 {m}
0.000,12.4500,0.9000, !- X,Y,Z ==> Vertex 2 {m}
0.000,10.6200,0.9000, !- X,Y,Z ==> Vertex 3 {m}
0.000,10.6200,2.4240; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Perimeter_ZN_4_wall_west_Window_1, !- Name
Window, !- Surface Type
Window_U_0.36_SHGC_0.38, !- Construction Name
Perimeter_ZN_4_wall_west,!- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
0.000,17.0700,2.4240, !- X,Y,Z ==> Vertex 1 {m}
0.000,17.0700,0.9000, !- X,Y,Z ==> Vertex 2 {m}
0.000,15.2400,0.9000, !- X,Y,Z ==> Vertex 3 {m}
0.000,15.2400,2.4240; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Perimeter_ZN_3_wall_north_Door1, !- Name
Door, !- Surface Type
Swinging Door_con, !- Construction Name
Perimeter_ZN_3_wall_north, !- Building Surface Name
, !- Outside Boundary Condition Object
autocalculate, !- View Factor to Ground
, !- Frame and Divider Name
1, !- Multiplier
4, !- Number of Vertices
14.911800279714,18.460000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m}
14.911800279714,18.460000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
13.997400279714,18.460000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
13.997400279714,18.460000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Perimeter_ZN_3_wall_north_Door2, !- Name
Door, !- Surface Type
Swinging Door_con, !- Construction Name
Perimeter_ZN_3_wall_north, !- Building Surface Name
, !- Outside Boundary Condition Object
autocalculate, !- View Factor to Ground
, !- Frame and Divider Name
1, !- Multiplier
4, !- Number of Vertices
19.131920148775,18.460000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m}
19.131920148775,18.460000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
18.217520148775,18.460000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
18.217520148775,18.460000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m}
!- =========== ALL OBJECTS IN CLASS: INTERNALMASS ===========
InternalMass,
Core_ZN_InternalMass_1, !- Name
InteriorFurnishings, !- Construction Name
Core_ZN, !- Zone Name
299.3148; !- Surface Area {m2}
InternalMass,
Perimeter_ZN_1_InternalMass_1, !- Name
InteriorFurnishings, !- Construction Name
Perimeter_ZN_1, !- Zone Name
226.9000; !- Surface Area {m2}
InternalMass,
Perimeter_ZN_2_InternalMass_1, !- Name
InteriorFurnishings, !- Construction Name
Perimeter_ZN_2, !- Zone Name
134.6000; !- Surface Area {m2}
InternalMass,
Perimeter_ZN_3_InternalMass_1, !- Name
InteriorFurnishings, !- Construction Name
Perimeter_ZN_3, !- Zone Name
226.9000; !- Surface Area {m2}
InternalMass,
Perimeter_ZN_4_InternalMass_1, !- Name
InteriorFurnishings, !- Construction Name
Perimeter_ZN_4, !- Zone Name
134.6000; !- Surface Area {m2}
!- =========== ALL OBJECTS IN CLASS: PEOPLE ===========
People,
Core_ZN, !- Name
Core_ZN, !- Zone or ZoneList Name
BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name
Area/Person, !- Number of People Calculation Method
, !- Number of People
, !- People per Zone Floor Area {person/m2}
16.5880764430522, !- Zone Floor Area per Person {m2/person}
0.3000, !- Fraction Radiant
AUTOCALCULATE, !- Sensible Heat Fraction
ACTIVITY_SCH, !- Activity Level Schedule Name
, !- Carbon Dioxide Generation Rate {m3/s-W}
No, !- Enable ASHRAE 55 Comfort Warnings
ZoneAveraged; !- Mean Radiant Temperature Calculation Type
People,
Perimeter_ZN_1, !- Name
Perimeter_ZN_1, !- Zone or ZoneList Name
BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name
Area/Person, !- Number of People Calculation Method
, !- Number of People
, !- People per Zone Floor Area {person/m2}
16.5880764430522, !- Zone Floor Area per Person {m2/person}
0.3000, !- Fraction Radiant
AUTOCALCULATE, !- Sensible Heat Fraction
ACTIVITY_SCH, !- Activity Level Schedule Name
, !- Carbon Dioxide Generation Rate {m3/s-W}
No, !- Enable ASHRAE 55 Comfort Warnings
ZoneAveraged; !- Mean Radiant Temperature Calculation Type
People,
Perimeter_ZN_2, !- Name
Perimeter_ZN_2, !- Zone or ZoneList Name
BLDG_OCC_SCH_w_SB, !- Number of People Schedule Name
Area/Person, !- Number of People Calculation Method
, !- Number of People
, !- People per Zone Floor Area {person/m2}
16.5880764430522, !- Zone Floor Area per Person {m2/person}
0.3000, !- Fraction Radiant
AUTOCALCULATE, !- Sensible Heat Fraction
ACTIVITY_SCH, !- Activity Level Schedule Name
, !- Carbon Dioxide Generation Rate {m3/s-W}
No, !- Enable ASHRAE 55 Comfort Warnings
ZoneAveraged; !- Mean Radiant Temperature Calculation Type
People,
Perimeter_ZN_3, !- Name
Perimeter_ZN_3, !- Zone or ZoneList Name
BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name
Area/Person, !- Number of People Calculation Method
, !- Number of People
, !- People per Zone Floor Area {person/m2}
16.5880764430522, !- Zone Floor Area per Person {m2/person}
0.3000, !- Fraction Radiant
AUTOCALCULATE, !- Sensible Heat Fraction
ACTIVITY_SCH, !- Activity Level Schedule Name
, !- Carbon Dioxide Generation Rate {m3/s-W}
No, !- Enable ASHRAE 55 Comfort Warnings
ZoneAveraged; !- Mean Radiant Temperature Calculation Type
People,
Perimeter_ZN_4, !- Name
Perimeter_ZN_4, !- Zone or ZoneList Name
BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name
Area/Person, !- Number of People Calculation Method
, !- Number of People
, !- People per Zone Floor Area {person/m2}
16.5880764430522, !- Zone Floor Area per Person {m2/person}
0.3000, !- Fraction Radiant
AUTOCALCULATE, !- Sensible Heat Fraction
ACTIVITY_SCH, !- Activity Level Schedule Name
, !- Carbon Dioxide Generation Rate {m3/s-W}
No, !- Enable ASHRAE 55 Comfort Warnings
ZoneAveraged; !- Mean Radiant Temperature Calculation Type
!- =========== ALL OBJECTS IN CLASS: LIGHTS ===========
Lights,
Core_ZN_Lights, !- Name
Core_ZN, !- Zone or ZoneList Name
BLDG_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
6.888902667, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
Lights,
Perimeter_ZN_1_Lights, !- Name
Perimeter_ZN_1, !- Zone or ZoneList Name
BLDG_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
6.888902667, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
Lights,
Perimeter_ZN_2_Lights, !- Name
Perimeter_ZN_2, !- Zone or ZoneList Name
BLDG_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
6.888902667, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
Lights,
Perimeter_ZN_3_Lights, !- Name
Perimeter_ZN_3, !- Zone or ZoneList Name
BLDG_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
6.888902667, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
Lights,
Perimeter_ZN_4_Lights, !- Name
Perimeter_ZN_4, !- Zone or ZoneList Name
BLDG_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
6.888902667, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
!- =========== ALL OBJECTS IN CLASS: ELECTRICEQUIPMENT ===========
ElectricEquipment,
Core_ZN_MiscPlug_Equip, !- Name
Core_ZN, !- Zone or ZoneList Name
BLDG_EQUIP_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Design Level {W}
6.78, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
, !- Fraction Latent
, !- Fraction Radiant
, !- Fraction Lost
MiscPlug; !- End-Use Subcategory
ElectricEquipment,
Perimeter_ZN_1_MiscPlug_Equip, !- Name
Perimeter_ZN_1, !- Zone or ZoneList Name
BLDG_EQUIP_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Design Level {W}
6.78, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
, !- Fraction Latent
, !- Fraction Radiant
, !- Fraction Lost
MiscPlug; !- End-Use Subcategory
ElectricEquipment,
Perimeter_ZN_2_MiscPlug_Equip, !- Name
Perimeter_ZN_2, !- Zone or ZoneList Name
BLDG_EQUIP_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Design Level {W}
6.78, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
, !- Fraction Latent
, !- Fraction Radiant
, !- Fraction Lost
MiscPlug; !- End-Use Subcategory
ElectricEquipment,
Perimeter_ZN_3_MiscPlug_Equip, !- Name
Perimeter_ZN_3, !- Zone or ZoneList Name
BLDG_EQUIP_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Design Level {W}
6.78, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
, !- Fraction Latent
, !- Fraction Radiant
, !- Fraction Lost
MiscPlug; !- End-Use Subcategory
ElectricEquipment,
Perimeter_ZN_4_MiscPlug_Equip, !- Name
Perimeter_ZN_4, !- Zone or ZoneList Name
BLDG_EQUIP_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Design Level {W}
6.78, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
, !- Fraction Latent
, !- Fraction Radiant
, !- Fraction Lost
MiscPlug; !- End-Use Subcategory
!- =========== ALL OBJECTS IN CLASS: DAYLIGHTING:CONTROLS ===========
Daylighting:Controls,
Perimeter_ZN_1_DaylCtrl, !- Name
Perimeter_ZN_1, !- Zone Name
SplitFlux, !- Daylighting Method
, !- Availability Schedule Name
Continuousoff, !- Lighting Control Type
0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control
0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control
3, !- Number of Stepped Control Steps
1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control
Perimeter_ZN_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name
180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg}
22.0, !- Maximum Allowable Discomfort Glare Index
, !- DElight Gridding Resolution {m2}
Perimeter_ZN_1_DaylRefPt1, !- Daylighting Reference Point 1 Name
0.2399, !- Fraction of Zone Controlled by Reference Point 1
377, !- Illuminance Setpoint at Reference Point 1 {lux}
Perimeter_ZN_1_DaylRefPt2, !- Daylighting Reference Point 2 Name
0.0302, !- Fraction of Zone Controlled by Reference Point 2
377; !- Illuminance Setpoint at Reference Point 2 {lux}
Daylighting:ReferencePoint,
Perimeter_ZN_1_DaylRefPt1, !- Name
Perimeter_ZN_1, !- Zone Name
9.144000, !- X-Coordinate of Reference Point {m}
1.633700, !- Y-Coordinate of Reference Point {m}
0.762000; !- Z-Coordinate of Reference Point {m}
Daylighting:ReferencePoint,
Perimeter_ZN_1_DaylRefPt2, !- Name
Perimeter_ZN_1, !- Zone Name
9.144000, !- X-Coordinate of Reference Point {m}
3.267500, !- Y-Coordinate of Reference Point {m}
0.762000; !- Z-Coordinate of Reference Point {m}
Daylighting:Controls,
Perimeter_ZN_2_DaylCtrl, !- Name
Perimeter_ZN_2, !- Zone Name
SplitFlux, !- Daylighting Method
, !- Availability Schedule Name
Continuousoff, !- Lighting Control Type
0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control
0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control
3, !- Number of Stepped Control Steps
1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control
Perimeter_ZN_2_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name
90.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg}
22.0, !- Maximum Allowable Discomfort Glare Index
, !- DElight Gridding Resolution {m2}
Perimeter_ZN_2_DaylRefPt1, !- Daylighting Reference Point 1 Name
0.2399, !- Fraction of Zone Controlled by Reference Point 1
377, !- Illuminance Setpoint at Reference Point 1 {lux}
Perimeter_ZN_2_DaylRefPt2, !- Daylighting Reference Point 2 Name
0.0302, !- Fraction of Zone Controlled by Reference Point 2
377; !- Illuminance Setpoint at Reference Point 2 {lux}
Daylighting:ReferencePoint,
Perimeter_ZN_2_DaylRefPt1, !- Name
Perimeter_ZN_2, !- Zone Name
26.089800, !- X-Coordinate of Reference Point {m}
9.144000, !- Y-Coordinate of Reference Point {m}
0.762000; !- Z-Coordinate of Reference Point {m}
Daylighting:ReferencePoint,
Perimeter_ZN_2_DaylRefPt2, !- Name
Perimeter_ZN_2, !- Zone Name
24.456100, !- X-Coordinate of Reference Point {m}
9.144000, !- Y-Coordinate of Reference Point {m}
0.762000; !- Z-Coordinate of Reference Point {m}
Daylighting:Controls,
Perimeter_ZN_3_DaylCtrl, !- Name
Perimeter_ZN_3, !- Zone Name
SplitFlux, !- Daylighting Method
, !- Availability Schedule Name
Continuousoff, !- Lighting Control Type
0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control
0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control
3, !- Number of Stepped Control Steps
1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control
Perimeter_ZN_3_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name
0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg}
22.0, !- Maximum Allowable Discomfort Glare Index
, !- DElight Gridding Resolution {m2}
Perimeter_ZN_3_DaylRefPt1, !- Daylighting Reference Point 1 Name
0.2399, !- Fraction of Zone Controlled by Reference Point 1
377, !- Illuminance Setpoint at Reference Point 1 {lux}
Perimeter_ZN_3_DaylRefPt2, !- Daylighting Reference Point 2 Name
0.0302, !- Fraction of Zone Controlled by Reference Point 2
377; !- Illuminance Setpoint at Reference Point 2 {lux}
Daylighting:ReferencePoint,
Perimeter_ZN_3_DaylRefPt1, !- Name
Perimeter_ZN_3, !- Zone Name
18.288000, !- X-Coordinate of Reference Point {m}
16.825000, !- Y-Coordinate of Reference Point {m}
0.762000; !- Z-Coordinate of Reference Point {m}
Daylighting:ReferencePoint,
Perimeter_ZN_3_DaylRefPt2, !- Name
Perimeter_ZN_3, !- Zone Name
18.288000, !- X-Coordinate of Reference Point {m}
15.192500, !- Y-Coordinate of Reference Point {m}
0.762000; !- Z-Coordinate of Reference Point {m}
Daylighting:Controls,
Perimeter_ZN_4_DaylCtrl, !- Name
Perimeter_ZN_4, !- Zone Name
SplitFlux, !- Daylighting Method
, !- Availability Schedule Name
Continuousoff, !- Lighting Control Type
0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control
0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control
3, !- Number of Stepped Control Steps
1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control
Perimeter_ZN_4_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name
270.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg}
22.0, !- Maximum Allowable Discomfort Glare Index
, !- DElight Gridding Resolution {m2}
Perimeter_ZN_4_DaylRefPt1, !- Daylighting Reference Point 1 Name
0.2399, !- Fraction of Zone Controlled by Reference Point 1
377, !- Illuminance Setpoint at Reference Point 1 {lux}
Perimeter_ZN_4_DaylRefPt2, !- Daylighting Reference Point 2 Name
0.0302, !- Fraction of Zone Controlled by Reference Point 2
377; !- Illuminance Setpoint at Reference Point 2 {lux}
Daylighting:ReferencePoint,
Perimeter_ZN_4_DaylRefPt1, !- Name
Perimeter_ZN_4, !- Zone Name
1.633700, !- X-Coordinate of Reference Point {m}
9.144000, !- Y-Coordinate of Reference Point {m}
0.762000; !- Z-Coordinate of Reference Point {m}
Daylighting:ReferencePoint,
Perimeter_ZN_4_DaylRefPt2, !- Name
Perimeter_ZN_4, !- Zone Name
3.267500, !- X-Coordinate of Reference Point {m}
9.144000, !- Y-Coordinate of Reference Point {m}
0.762000; !- Z-Coordinate of Reference Point {m}
!- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION ===========
ZoneInfiltration:DesignFlowRate,
Perimeter_ZN_1_Infiltration, !- Name
Perimeter_ZN_1, !- Zone or ZoneList Name
INFIL_QUARTER_ON_SCH, !- Schedule Name
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
0, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
0, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0.2240, !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
ZoneInfiltration:DesignFlowRate,
Perimeter_ZN_1_Door_Infiltration, !- Name
Perimeter_ZN_1, !- Zone or ZoneList Name
INFIL_Door_Opening_SCH, !- Schedule Name
Flow/Zone, !- Design Flow Rate Calculation Method
0.076455414, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
1, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0., !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
ZoneInfiltration:DesignFlowRate,
Perimeter_ZN_2_Infiltration, !- Name
Perimeter_ZN_2, !- Zone or ZoneList Name
INFIL_QUARTER_ON_SCH, !- Schedule Name
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
0, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
0, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0.2240, !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
ZoneInfiltration:DesignFlowRate,
Perimeter_ZN_3_Infiltration, !- Name
Perimeter_ZN_3, !- Zone or ZoneList Name
INFIL_QUARTER_ON_SCH, !- Schedule Name
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
0, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
0, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0.2240, !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
ZoneInfiltration:DesignFlowRate,
Perimeter_ZN_4_Infiltration, !- Name
Perimeter_ZN_4, !- Zone or ZoneList Name
INFIL_QUARTER_ON_SCH, !- Schedule Name
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
0, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
0, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0.2240, !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
ZoneInfiltration:DesignFlowRate,
Attic_Infiltration, !- Name
Attic, !- Zone or ZoneList Name
ALWAYS_ON, !- Schedule Name
Flow/Zone, !- Design Flow Rate Calculation Method
0.2001, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
1.0, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0.0000, !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
!- =========== ALL OBJECTS IN CLASS: EXTERIOR:LIGHTS ===========
Exterior:Lights,
Exterior_Lights_a, !- Name
Exterior_lighting_schedule_a, !- Schedule Name
50.7, !- Design Level {W}
AstronomicalClock, !- Control Option
General; !- End-Use Subcategory
Exterior:Lights,
Exterior_Lights_b, !- Name
Exterior_lighting_schedule_b_2016, !- Schedule Name
115.1, !- Design Level {W}
AstronomicalClock, !- Control Option
General; !- End-Use Subcategory
Exterior:Lights,
Exterior_Lights_c, !- Name
Exterior_lighting_schedule_c_2016, !- Schedule Name
445.5, !- Design Level {W}
AstronomicalClock, !- Control Option
General; !- End-Use Subcategory
Schedule:Compact,
Exterior_lighting_schedule_a, !- Name
fraction, !- Schedule Type Limits Name
Through:12/31, !- Field 1
For:AllDays, !- Field 2
Until: 06:00,0, !- Field 3
Until: 24:00,1; !- Field 5
Schedule:Compact,
Exterior_lighting_schedule_b, !- Name
fraction, !- Schedule Type Limits Name
Through:12/31, !- Field 1
For:AllDays, !- Field 2
Until: 06:00,0.7, !- Field 3
Until: 24:00,1; !- Field 5
Schedule:Compact,
Exterior_lighting_schedule_a_IECC2015, !- Name
fraction, !- Schedule Type Limits Name
Through:12/31, !- Field 1
For:Weekdays SummerDesignDay, !- Field 2
Until: 07:00,0, !- Field 3
Until: 19:00,1, !- Field 5
Until: 24:00,0, !- Field 7
For:Saturdays, !- Field 9
Until: 24:00,0, !- Field 10
For:AllOtherDays, !- Field 12
Until: 24:00,0; !- Field 13
Schedule:Compact,
Exterior_lighting_schedule_b_2016, !- Name
fraction, !- Schedule Type Limits Name
Through:12/31, !- Field 1
For:AllDays, !- Field 2
Until: 06:00,0.5, !- Field 3
Until: 24:00,1; !- Field 5
Schedule:Compact,
Exterior_lighting_schedule_c_2016, !- Name
fraction, !- Schedule Type Limits Name
Through:12/31, !- Field 1
For:AllDays, !- Field 2
Until: 06:00,0.5, !- Field 3
Until: 19:00,1, !- Field 5
Until: 24:00,0.5; !- Field 7
!- =========== ALL OBJECTS IN CLASS: SIZING:PARAMETERS ===========
Sizing:Parameters,
1.2000, !- Heating Sizing Factor
1.2000, !- Cooling Sizing Factor
6; !- Timesteps in Averaging Window
!- =========== ALL OBJECTS IN CLASS: SIZING:ZONE ===========
Sizing:Zone,
Core_ZN, !- Zone or ZoneList Name
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
12.8, !- Zone Cooling Design Supply Air Temperature {C}
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
40.0, !- Zone Heating Design Supply Air Temperature {C}
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
SZ DSOA Core_ZN, !- Design Specification Outdoor Air Object Name
, !- Zone Heating Sizing Factor
, !- Zone Cooling Sizing Factor
DesignDay, !- Cooling Design Air Flow Method
0.0, !- Cooling Design Air Flow Rate {m3/s}
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
0.0, !- Cooling Minimum Air Flow {m3/s}
0.0, !- Cooling Minimum Air Flow Fraction
DesignDay, !- Heating Design Air Flow Method
0.0, !- Heating Design Air Flow Rate {m3/s}
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
, !- Heating Maximum Air Flow {m3/s}
; !- Heating Maximum Air Flow Fraction
DesignSpecification:OutdoorAir,
SZ DSOA Core_ZN, !- Name
Flow/Area, !- Outdoor Air Method
, !- Outdoor Air Flow per Person {m3/s-person}
0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
0.0; !- Outdoor Air Flow per Zone {m3/s}
Sizing:Zone,
Perimeter_ZN_1, !- Zone or ZoneList Name
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
12.8, !- Zone Cooling Design Supply Air Temperature {C}
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
40.0, !- Zone Heating Design Supply Air Temperature {C}
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
SZ DSOA Perimeter_ZN_1, !- Design Specification Outdoor Air Object Name
, !- Zone Heating Sizing Factor
, !- Zone Cooling Sizing Factor
DesignDay, !- Cooling Design Air Flow Method
0.0, !- Cooling Design Air Flow Rate {m3/s}
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
0.0, !- Cooling Minimum Air Flow {m3/s}
0.0, !- Cooling Minimum Air Flow Fraction
DesignDay, !- Heating Design Air Flow Method
0.0, !- Heating Design Air Flow Rate {m3/s}
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
, !- Heating Maximum Air Flow {m3/s}
; !- Heating Maximum Air Flow Fraction
DesignSpecification:OutdoorAir,
SZ DSOA Perimeter_ZN_1, !- Name
Flow/Area, !- Outdoor Air Method
, !- Outdoor Air Flow per Person {m3/s-person}
0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
0.0; !- Outdoor Air Flow per Zone {m3/s}
Sizing:Zone,
Perimeter_ZN_2, !- Zone or ZoneList Name
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
12.8, !- Zone Cooling Design Supply Air Temperature {C}
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
40.0, !- Zone Heating Design Supply Air Temperature {C}
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
SZ DSOA Perimeter_ZN_2, !- Design Specification Outdoor Air Object Name
, !- Zone Heating Sizing Factor
, !- Zone Cooling Sizing Factor
DesignDay, !- Cooling Design Air Flow Method
0.0, !- Cooling Design Air Flow Rate {m3/s}
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
0.0, !- Cooling Minimum Air Flow {m3/s}
0.0, !- Cooling Minimum Air Flow Fraction
DesignDay, !- Heating Design Air Flow Method
0.0, !- Heating Design Air Flow Rate {m3/s}
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
, !- Heating Maximum Air Flow {m3/s}
; !- Heating Maximum Air Flow Fraction
DesignSpecification:OutdoorAir,
SZ DSOA Perimeter_ZN_2, !- Name
Flow/Area, !- Outdoor Air Method
, !- Outdoor Air Flow per Person {m3/s-person}
0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
0.0; !- Outdoor Air Flow per Zone {m3/s}
Sizing:Zone,
Perimeter_ZN_3, !- Zone or ZoneList Name
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
12.8, !- Zone Cooling Design Supply Air Temperature {C}
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
40.0, !- Zone Heating Design Supply Air Temperature {C}
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
SZ DSOA Perimeter_ZN_3, !- Design Specification Outdoor Air Object Name
, !- Zone Heating Sizing Factor
, !- Zone Cooling Sizing Factor
DesignDay, !- Cooling Design Air Flow Method
0.0, !- Cooling Design Air Flow Rate {m3/s}
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
0.0, !- Cooling Minimum Air Flow {m3/s}
0.0, !- Cooling Minimum Air Flow Fraction
DesignDay, !- Heating Design Air Flow Method
0.0, !- Heating Design Air Flow Rate {m3/s}
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
, !- Heating Maximum Air Flow {m3/s}
; !- Heating Maximum Air Flow Fraction
DesignSpecification:OutdoorAir,
SZ DSOA Perimeter_ZN_3, !- Name
Flow/Area, !- Outdoor Air Method
, !- Outdoor Air Flow per Person {m3/s-person}
0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
0.0; !- Outdoor Air Flow per Zone {m3/s}
Sizing:Zone,
Perimeter_ZN_4, !- Zone or ZoneList Name
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
12.8, !- Zone Cooling Design Supply Air Temperature {C}
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
40.0, !- Zone Heating Design Supply Air Temperature {C}
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
SZ DSOA Perimeter_ZN_4, !- Design Specification Outdoor Air Object Name
, !- Zone Heating Sizing Factor
, !- Zone Cooling Sizing Factor
DesignDay, !- Cooling Design Air Flow Method
0.0, !- Cooling Design Air Flow Rate {m3/s}
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
0.0, !- Cooling Minimum Air Flow {m3/s}
0.0, !- Cooling Minimum Air Flow Fraction
DesignDay, !- Heating Design Air Flow Method
0.0, !- Heating Design Air Flow Rate {m3/s}
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
, !- Heating Maximum Air Flow {m3/s}
; !- Heating Maximum Air Flow Fraction
DesignSpecification:OutdoorAir,
SZ DSOA Perimeter_ZN_4, !- Name
Flow/Area, !- Outdoor Air Method
, !- Outdoor Air Flow per Person {m3/s-person}
0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
0.0; !- Outdoor Air Flow per Zone {m3/s}
!- =========== ALL OBJECTS IN CLASS: SIZING:SYSTEM ===========
Sizing:System,
PSZ-AC:1, !- AirLoop Name
Sensible, !- Type of Load to Size On
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
0.3000, !- Central Heating Maximum System Air Flow Ratio
7.0, !- Preheat Design Temperature {C}
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Precool Design Temperature {C}
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Central Cooling Design Supply Air Temperature {C}
40.0, !- Central Heating Design Supply Air Temperature {C}
NonCoincident, !- Type of Zone Sum to Use
No, !- 100% Outdoor Air in Cooling
No, !- 100% Outdoor Air in Heating
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
DesignDay, !- Cooling Supply Air Flow Rate Method
0.0, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
DesignDay, !- Heating Supply Air Flow Rate Method
0.0, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
ZoneSum; !- System Outdoor Air Method
Sizing:System,
PSZ-AC:2, !- AirLoop Name
Sensible, !- Type of Load to Size On
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
0.3000, !- Central Heating Maximum System Air Flow Ratio
7.0, !- Preheat Design Temperature {C}
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Precool Design Temperature {C}
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Central Cooling Design Supply Air Temperature {C}
40.0, !- Central Heating Design Supply Air Temperature {C}
NonCoincident, !- Type of Zone Sum to Use
No, !- 100% Outdoor Air in Cooling
No, !- 100% Outdoor Air in Heating
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
DesignDay, !- Cooling Supply Air Flow Rate Method
0.0, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
DesignDay, !- Heating Supply Air Flow Rate Method
0.0, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
ZoneSum; !- System Outdoor Air Method
Sizing:System,
PSZ-AC:3, !- AirLoop Name
Sensible, !- Type of Load to Size On
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
0.3000, !- Central Heating Maximum System Air Flow Ratio
7.0, !- Preheat Design Temperature {C}
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Precool Design Temperature {C}
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Central Cooling Design Supply Air Temperature {C}
40.0, !- Central Heating Design Supply Air Temperature {C}
NonCoincident, !- Type of Zone Sum to Use
No, !- 100% Outdoor Air in Cooling
No, !- 100% Outdoor Air in Heating
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
DesignDay, !- Cooling Supply Air Flow Rate Method
0.0, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
DesignDay, !- Heating Supply Air Flow Rate Method
0.0, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
ZoneSum; !- System Outdoor Air Method
Sizing:System,
PSZ-AC:4, !- AirLoop Name
Sensible, !- Type of Load to Size On
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
0.3000, !- Central Heating Maximum System Air Flow Ratio
7.0, !- Preheat Design Temperature {C}
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Precool Design Temperature {C}
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Central Cooling Design Supply Air Temperature {C}
40.0, !- Central Heating Design Supply Air Temperature {C}
NonCoincident, !- Type of Zone Sum to Use
No, !- 100% Outdoor Air in Cooling
No, !- 100% Outdoor Air in Heating
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
DesignDay, !- Cooling Supply Air Flow Rate Method
0.0, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
DesignDay, !- Heating Supply Air Flow Rate Method
0.0, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
ZoneSum; !- System Outdoor Air Method
Sizing:System,
PSZ-AC:5, !- AirLoop Name
Sensible, !- Type of Load to Size On
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
0.3000, !- Central Heating Maximum System Air Flow Ratio
7.0, !- Preheat Design Temperature {C}
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Precool Design Temperature {C}
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Central Cooling Design Supply Air Temperature {C}
40.0, !- Central Heating Design Supply Air Temperature {C}
NonCoincident, !- Type of Zone Sum to Use
No, !- 100% Outdoor Air in Cooling
No, !- 100% Outdoor Air in Heating
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
DesignDay, !- Cooling Supply Air Flow Rate Method
0.0, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
DesignDay, !- Heating Supply Air Flow Rate Method
0.0, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
ZoneSum; !- System Outdoor Air Method
!- =========== ALL OBJECTS IN CLASS: SIZING:PLANT ===========
Sizing:Plant,
SHWSys1, !- Plant or Condenser Loop Name
Heating, !- Loop Type
48.89, !- Design Loop Exit Temperature {C}
5.0; !- Loop Design Temperature Difference {deltaC}
!- =========== ALL OBJECTS IN CLASS: ZONECONTROL:THERMOSTAT ===========
ZoneControl:Thermostat,
Core_ZN Thermostat, !- Name
Core_ZN, !- Zone or ZoneList Name
Dual Zone Control Type Sched, !- Control Type Schedule Name
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
Core_ZN DualSPSched; !- Control 1 Name
ZoneControl:Thermostat,
Perimeter_ZN_1 Thermostat, !- Name
Perimeter_ZN_1, !- Zone or ZoneList Name
Dual Zone Control Type Sched, !- Control Type Schedule Name
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
Perimeter_ZN_1 DualSPSched; !- Control 1 Name
ZoneControl:Thermostat,
Perimeter_ZN_2 Thermostat, !- Name
Perimeter_ZN_2, !- Zone or ZoneList Name
Dual Zone Control Type Sched, !- Control Type Schedule Name
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
Perimeter_ZN_2 DualSPSched; !- Control 1 Name
ZoneControl:Thermostat,
Perimeter_ZN_3 Thermostat, !- Name
Perimeter_ZN_3, !- Zone or ZoneList Name
Dual Zone Control Type Sched, !- Control Type Schedule Name
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
Perimeter_ZN_3 DualSPSched; !- Control 1 Name
ZoneControl:Thermostat,
Perimeter_ZN_4 Thermostat, !- Name
Perimeter_ZN_4, !- Zone or ZoneList Name
Dual Zone Control Type Sched, !- Control Type Schedule Name
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
Perimeter_ZN_4 DualSPSched; !- Control 1 Name
!- =========== ALL OBJECTS IN CLASS: THERMOSTATSETPOINT:DUALSETPOINT ===========
ThermostatSetpoint:DualSetpoint,
Core_ZN DualSPSched, !- Name
HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
ThermostatSetpoint:DualSetpoint,
Perimeter_ZN_1 DualSPSched, !- Name
HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
ThermostatSetpoint:DualSetpoint,
Perimeter_ZN_2 DualSPSched, !- Name
HTGSETP_SCH_NO_OPTIMUM_w_SB, !- Heating Setpoint Temperature Schedule Name
CLGSETP_SCH_NO_OPTIMUM_w_SB; !- Cooling Setpoint Temperature Schedule Name
ThermostatSetpoint:DualSetpoint,
Perimeter_ZN_3 DualSPSched, !- Name
HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
ThermostatSetpoint:DualSetpoint,
Perimeter_ZN_4 DualSPSched, !- Name
HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
!- =========== ALL OBJECTS IN CLASS: AIRTERMINAL:SINGLEDUCT:UNCONTROLLED ===========
AirTerminal:SingleDuct:Uncontrolled,
Core_ZN Direct Air, !- Name
ALWAYS_ON, !- Availability Schedule Name
Core_ZN Direct Air Inlet Node Name, !- Zone Supply Air Node Name
AUTOSIZE; !- Maximum Air Flow Rate {m3/s}
AirTerminal:SingleDuct:Uncontrolled,
Perimeter_ZN_1 Direct Air, !- Name
ALWAYS_ON, !- Availability Schedule Name
Perimeter_ZN_1 Direct Air Inlet Node Name, !- Zone Supply Air Node Name
AUTOSIZE; !- Maximum Air Flow Rate {m3/s}
AirTerminal:SingleDuct:Uncontrolled,
Perimeter_ZN_2 Direct Air, !- Name
ALWAYS_ON, !- Availability Schedule Name
Perimeter_ZN_2 Direct Air Inlet Node Name, !- Zone Supply Air Node Name
AUTOSIZE; !- Maximum Air Flow Rate {m3/s}
AirTerminal:SingleDuct:Uncontrolled,
Perimeter_ZN_3 Direct Air, !- Name
ALWAYS_ON, !- Availability Schedule Name
Perimeter_ZN_3 Direct Air Inlet Node Name, !- Zone Supply Air Node Name
AUTOSIZE; !- Maximum Air Flow Rate {m3/s}
AirTerminal:SingleDuct:Uncontrolled,
Perimeter_ZN_4 Direct Air, !- Name
ALWAYS_ON, !- Availability Schedule Name
Perimeter_ZN_4 Direct Air Inlet Node Name, !- Zone Supply Air Node Name
AUTOSIZE; !- Maximum Air Flow Rate {m3/s}
!- =========== ALL OBJECTS IN CLASS: ZONEHVAC:EQUIPMENTLIST ===========
ZoneHVAC:EquipmentList,
Core_ZN Equipment, !- Name
SequentialLoad, !- Load Distribution Scheme
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
Core_ZN Direct Air, !- Zone Equipment 1 Name
1, !- Zone Equipment 1 Cooling Sequence
1; !- Zone Equipment 1 Heating or No-Load Sequence
ZoneHVAC:EquipmentList,
Perimeter_ZN_1 Equipment,!- Name
SequentialLoad, !- Load Distribution Scheme
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
Perimeter_ZN_1 Direct Air, !- Zone Equipment 1 Name
1, !- Zone Equipment 1 Cooling Sequence
1; !- Zone Equipment 1 Heating or No-Load Sequence
ZoneHVAC:EquipmentList,
Perimeter_ZN_2 Equipment,!- Name
SequentialLoad, !- Load Distribution Scheme
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
Perimeter_ZN_2 Direct Air, !- Zone Equipment 1 Name
1, !- Zone Equipment 1 Cooling Sequence
1; !- Zone Equipment 1 Heating or No-Load Sequence
ZoneHVAC:EquipmentList,
Perimeter_ZN_3 Equipment,!- Name
SequentialLoad, !- Load Distribution Scheme
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
Perimeter_ZN_3 Direct Air, !- Zone Equipment 1 Name
1, !- Zone Equipment 1 Cooling Sequence
1; !- Zone Equipment 1 Heating or No-Load Sequence
ZoneHVAC:EquipmentList,
Perimeter_ZN_4 Equipment,!- Name
SequentialLoad, !- Load Distribution Scheme
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
Perimeter_ZN_4 Direct Air, !- Zone Equipment 1 Name
1, !- Zone Equipment 1 Cooling Sequence
1; !- Zone Equipment 1 Heating or No-Load Sequence
!- =========== ALL OBJECTS IN CLASS: ZONEHVAC:EQUIPMENTCONNECTIONS ===========
ZoneHVAC:EquipmentConnections,
Core_ZN, !- Zone Name
Core_ZN Equipment, !- Zone Conditioning Equipment List Name
Core_ZN Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
, !- Zone Air Exhaust Node or NodeList Name
Core_ZN Air Node, !- Zone Air Node Name
Core_ZN Return Air Node Name; !- Zone Return Air Node or NodeList Name
ZoneHVAC:EquipmentConnections,
Perimeter_ZN_1, !- Zone Name
Perimeter_ZN_1 Equipment,!- Zone Conditioning Equipment List Name
Perimeter_ZN_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
, !- Zone Air Exhaust Node or NodeList Name
Perimeter_ZN_1 Air Node, !- Zone Air Node Name
Perimeter_ZN_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
ZoneHVAC:EquipmentConnections,
Perimeter_ZN_2, !- Zone Name
Perimeter_ZN_2 Equipment,!- Zone Conditioning Equipment List Name
Perimeter_ZN_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
, !- Zone Air Exhaust Node or NodeList Name
Perimeter_ZN_2 Air Node, !- Zone Air Node Name
Perimeter_ZN_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name
ZoneHVAC:EquipmentConnections,
Perimeter_ZN_3, !- Zone Name
Perimeter_ZN_3 Equipment,!- Zone Conditioning Equipment List Name
Perimeter_ZN_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
, !- Zone Air Exhaust Node or NodeList Name
Perimeter_ZN_3 Air Node, !- Zone Air Node Name
Perimeter_ZN_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
ZoneHVAC:EquipmentConnections,
Perimeter_ZN_4, !- Zone Name
Perimeter_ZN_4 Equipment,!- Zone Conditioning Equipment List Name
Perimeter_ZN_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
, !- Zone Air Exhaust Node or NodeList Name
Perimeter_ZN_4 Air Node, !- Zone Air Node Name
Perimeter_ZN_4 Return Air Node Name; !- Zone Return Air Node or NodeList Name
!- =========== ALL OBJECTS IN CLASS: FAN:CONSTANTVOLUME ===========
Fan:OnOff,
PSZ-AC:1 Fan, !- Name
HVACOperationSchd, !- Availability Schedule Name
0.55575, !- Fan Total Efficiency
622.5, !- Pressure Rise {Pa}
AUTOSIZE, !- Maximum Flow Rate {m3/s}
0.855, !- Motor Efficiency
1.0, !- Motor In Airstream Fraction
PSZ-AC:1_OA-PSZ-AC:1_FanNode, !- Air Inlet Node Name
PSZ-AC:1_Fan-PSZ-AC:1_CoolCNode, !- Air Outlet Node Name
, !- Fan Power Ratio Function of Speed Ratio Curve Name
, !- Fan Efficiency Ratio Function of Speed Ratio Curve Name
General; !- End-Use Subcategory
Fan:OnOff,
PSZ-AC:2 Fan, !- Name
HVACOperationSchd, !- Availability Schedule Name
0.55575, !- Fan Total Efficiency
622.5, !- Pressure Rise {Pa}
AUTOSIZE, !- Maximum Flow Rate {m3/s}
0.855, !- Motor Efficiency
1.0, !- Motor In Airstream Fraction
PSZ-AC:2_OA-PSZ-AC:2_FanNode, !- Air Inlet Node Name
PSZ-AC:2_Fan-PSZ-AC:2_CoolCNode, !- Air Outlet Node Name
, !- Fan Power Ratio Function of Speed Ratio Curve Name
, !- Fan Efficiency Ratio Function of Speed Ratio Curve Name
General; !- End-Use Subcategory
Fan:OnOff,
PSZ-AC:3 Fan, !- Name
HVACOperationSchd, !- Availability Schedule Name
0.55575, !- Fan Total Efficiency
622.5, !- Pressure Rise {Pa}
AUTOSIZE, !- Maximum Flow Rate {m3/s}
0.855, !- Motor Efficiency
1.0, !- Motor In Airstream Fraction
PSZ-AC:3_OA-PSZ-AC:3_FanNode, !- Air Inlet Node Name
PSZ-AC:3_Fan-PSZ-AC:3_CoolCNode, !- Air Outlet Node Name
, !- Fan Power Ratio Function of Speed Ratio Curve Name
, !- Fan Efficiency Ratio Function of Speed Ratio Curve Name
General; !- End-Use Subcategory
Fan:OnOff,
PSZ-AC:4 Fan, !- Name
HVACOperationSchd, !- Availability Schedule Name
0.55575, !- Fan Total Efficiency
622.5, !- Pressure Rise {Pa}
AUTOSIZE, !- Maximum Flow Rate {m3/s}
0.855, !- Motor Efficiency
1.0, !- Motor In Airstream Fraction
PSZ-AC:4_OA-PSZ-AC:4_FanNode, !- Air Inlet Node Name
PSZ-AC:4_Fan-PSZ-AC:4_CoolCNode, !- Air Outlet Node Name
, !- Fan Power Ratio Function of Speed Ratio Curve Name
, !- Fan Efficiency Ratio Function of Speed Ratio Curve Name
General; !- End-Use Subcategory
Fan:OnOff,
PSZ-AC:5 Fan, !- Name
HVACOperationSchd, !- Availability Schedule Name
0.55575, !- Fan Total Efficiency
622.5, !- Pressure Rise {Pa}
AUTOSIZE, !- Maximum Flow Rate {m3/s}
0.855, !- Motor Efficiency
1.0, !- Motor In Airstream Fraction
PSZ-AC:5_OA-PSZ-AC:5_FanNode, !- Air Inlet Node Name
PSZ-AC:5_Fan-PSZ-AC:5_CoolCNode, !- Air Outlet Node Name
, !- Fan Power Ratio Function of Speed Ratio Curve Name
, !- Fan Efficiency Ratio Function of Speed Ratio Curve Name
General; !- End-Use Subcategory
!- =========== ALL OBJECTS IN CLASS: COIL:COOLING:DX:SINGLESPEED ===========
Coil:Cooling:DX:SingleSpeed,
PSZ-AC:1 Heat Pump DX Cooling Coil, !- Name
ALWAYS_ON, !- Availability Schedule Name
AUTOSIZE, !- Gross Rated Total Cooling Capacity {W}
AUTOSIZE, !- Gross Rated Sensible Heat Ratio
4.11713235489972, !- Gross Rated Cooling COP {W/W}
AUTOSIZE, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC:1_Fan-PSZ-AC:1_CoolCNode, !- Air Inlet Node Name
PSZ-AC:1_CoolC-PSZ-AC:1_HeatCNode, !- Air Outlet Node Name
HPACCoolCapFT, !- Total Cooling Capacity Function of Temperature Curve Name
HPACCoolCapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
HPACCOOLEIRFT, !- Energy Input Ratio Function of Temperature Curve Name
HPACCOOLEIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
HPACCOOLPLFFPLR, !- Part Load Fraction Correlation Curve Name
; !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C}
Coil:Cooling:DX:SingleSpeed,
PSZ-AC:2 Heat Pump DX Cooling Coil, !- Name
ALWAYS_ON, !- Availability Schedule Name
AUTOSIZE, !- Gross Rated Total Cooling Capacity {W}
AUTOSIZE, !- Gross Rated Sensible Heat Ratio
4.11713235489972, !- Gross Rated Cooling COP {W/W}
AUTOSIZE, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC:2_Fan-PSZ-AC:2_CoolCNode, !- Air Inlet Node Name
PSZ-AC:2_CoolC-PSZ-AC:2_HeatCNode, !- Air Outlet Node Name
HPACCoolCapFT, !- Total Cooling Capacity Function of Temperature Curve Name
HPACCoolCapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
HPACCOOLEIRFT, !- Energy Input Ratio Function of Temperature Curve Name
HPACCOOLEIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
HPACCOOLPLFFPLR, !- Part Load Fraction Correlation Curve Name
; !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C}
Coil:Cooling:DX:SingleSpeed,
PSZ-AC:3 Heat Pump DX Cooling Coil, !- Name
ALWAYS_ON, !- Availability Schedule Name
AUTOSIZE, !- Gross Rated Total Cooling Capacity {W}
AUTOSIZE, !- Gross Rated Sensible Heat Ratio
4.11713235489972, !- Gross Rated Cooling COP {W/W}
AUTOSIZE, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC:3_Fan-PSZ-AC:3_CoolCNode, !- Air Inlet Node Name
PSZ-AC:3_CoolC-PSZ-AC:3_HeatCNode, !- Air Outlet Node Name
HPACCoolCapFT, !- Total Cooling Capacity Function of Temperature Curve Name
HPACCoolCapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
HPACCOOLEIRFT, !- Energy Input Ratio Function of Temperature Curve Name
HPACCOOLEIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
HPACCOOLPLFFPLR, !- Part Load Fraction Correlation Curve Name
; !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C}
Coil:Cooling:DX:SingleSpeed,
PSZ-AC:4 Heat Pump DX Cooling Coil, !- Name
ALWAYS_ON, !- Availability Schedule Name
AUTOSIZE, !- Gross Rated Total Cooling Capacity {W}
AUTOSIZE, !- Gross Rated Sensible Heat Ratio
4.11713235489972, !- Gross Rated Cooling COP {W/W}
AUTOSIZE, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC:4_Fan-PSZ-AC:4_CoolCNode, !- Air Inlet Node Name
PSZ-AC:4_CoolC-PSZ-AC:4_HeatCNode, !- Air Outlet Node Name
HPACCoolCapFT, !- Total Cooling Capacity Function of Temperature Curve Name
HPACCoolCapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
HPACCOOLEIRFT, !- Energy Input Ratio Function of Temperature Curve Name
HPACCOOLEIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
HPACCOOLPLFFPLR, !- Part Load Fraction Correlation Curve Name
; !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C}
Coil:Cooling:DX:SingleSpeed,
PSZ-AC:5 Heat Pump DX Cooling Coil, !- Name
ALWAYS_ON, !- Availability Schedule Name
AUTOSIZE, !- Gross Rated Total Cooling Capacity {W}
AUTOSIZE, !- Gross Rated Sensible Heat Ratio
4.11713235489972, !- Gross Rated Cooling COP {W/W}
AUTOSIZE, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC:5_Fan-PSZ-AC:5_CoolCNode, !- Air Inlet Node Name
PSZ-AC:5_CoolC-PSZ-AC:5_HeatCNode, !- Air Outlet Node Name
HPACCoolCapFT, !- Total Cooling Capacity Function of Temperature Curve Name
HPACCoolCapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
HPACCOOLEIRFT, !- Energy Input Ratio Function of Temperature Curve Name
HPACCOOLEIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
HPACCOOLPLFFPLR, !- Part Load Fraction Correlation Curve Name
; !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C}
!- =========== ALL OBJECTS IN CLASS: COIL:HEATING:DX:SINGLESPEED ===========
Coil:Heating:DX:SingleSpeed,
PSZ-AC:1 Heat Pump DX Heating Coil, !- Name
ALWAYS_ON, !- Availability Schedule Name
AUTOSIZE, !- Gross Rated Heating Capacity {W}
3.3592, !- Gross Rated Heating COP {W/W}
AUTOSIZE, !- Rated Air Flow Rate {m3/s}
, !- Rated Supply Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC:1_CoolC-PSZ-AC:1_HeatCNode, !- Air Inlet Node Name
PSZ-AC:1_HeatC-PSZ-AC:1_SuppHeatingNode, !- Air Outlet Node Name
HPACHeatCapFT, !- Heating Capacity Function of Temperature Curve Name
HPACHeatCapFFF, !- Heating Capacity Function of Flow Fraction Curve Name
HPACHeatEIRFT, !- Energy Input Ratio Function of Temperature Curve Name
HPACHeatEIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
HPACCOOLPLFFPLR, !- Part Load Fraction Correlation Curve Name
HPACCOOLEIRFT, !- Defrost Energy Input Ratio Function of Temperature Curve Name
-12.2, !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C}
, !- Outdoor Dry-Bulb Temperature to Turn On Compressor {C}
1.67, !- Maximum Outdoor Dry-Bulb Temperature for Defrost Operation {C}
50.0, !- Crankcase Heater Capacity {W}
4.4, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C}
ReverseCycle, !- Defrost Strategy
OnDemand, !- Defrost Control
, !- Defrost Time Period Fraction
AUTOSIZE; !- Resistive Defrost Heater Capacity {W}
Coil:Heating:DX:SingleSpeed,
PSZ-AC:2 Heat Pump DX Heating Coil, !- Name
ALWAYS_ON, !- Availability Schedule Name
AUTOSIZE, !- Gross Rated Heating Capacity {W}
3.3592, !- Gross Rated Heating COP {W/W}
AUTOSIZE, !- Rated Air Flow Rate {m3/s}
, !- Rated Supply Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC:2_CoolC-PSZ-AC:2_HeatCNode, !- Air Inlet Node Name
PSZ-AC:2_HeatC-PSZ-AC:2_SuppHeatingNode, !- Air Outlet Node Name
HPACHeatCapFT, !- Heating Capacity Function of Temperature Curve Name
HPACHeatCapFFF, !- Heating Capacity Function of Flow Fraction Curve Name
HPACHeatEIRFT, !- Energy Input Ratio Function of Temperature Curve Name
HPACHeatEIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
HPACCOOLPLFFPLR, !- Part Load Fraction Correlation Curve Name
HPACCOOLEIRFT, !- Defrost Energy Input Ratio Function of Temperature Curve Name
-12.2, !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C}
, !- Outdoor Dry-Bulb Temperature to Turn On Compressor {C}
1.67, !- Maximum Outdoor Dry-Bulb Temperature for Defrost Operation {C}
50.0, !- Crankcase Heater Capacity {W}
4.4, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C}
ReverseCycle, !- Defrost Strategy
OnDemand, !- Defrost Control
, !- Defrost Time Period Fraction
AUTOSIZE; !- Resistive Defrost Heater Capacity {W}
Coil:Heating:DX:SingleSpeed,
PSZ-AC:3 Heat Pump DX Heating Coil, !- Name
ALWAYS_ON, !- Availability Schedule Name
AUTOSIZE, !- Gross Rated Heating Capacity {W}
3.3592, !- Gross Rated Heating COP {W/W}
AUTOSIZE, !- Rated Air Flow Rate {m3/s}
, !- Rated Supply Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC:3_CoolC-PSZ-AC:3_HeatCNode, !- Air Inlet Node Name
PSZ-AC:3_HeatC-PSZ-AC:3_SuppHeatingNode, !- Air Outlet Node Name
HPACHeatCapFT, !- Heating Capacity Function of Temperature Curve Name
HPACHeatCapFFF, !- Heating Capacity Function of Flow Fraction Curve Name
HPACHeatEIRFT, !- Energy Input Ratio Function of Temperature Curve Name
HPACHeatEIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
HPACCOOLPLFFPLR, !- Part Load Fraction Correlation Curve Name
HPACCOOLEIRFT, !- Defrost Energy Input Ratio Function of Temperature Curve Name
-12.2, !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C}
, !- Outdoor Dry-Bulb Temperature to Turn On Compressor {C}
1.67, !- Maximum Outdoor Dry-Bulb Temperature for Defrost Operation {C}
50.0, !- Crankcase Heater Capacity {W}
4.4, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C}
ReverseCycle, !- Defrost Strategy
OnDemand, !- Defrost Control
, !- Defrost Time Period Fraction
AUTOSIZE; !- Resistive Defrost Heater Capacity {W}
Coil:Heating:DX:SingleSpeed,
PSZ-AC:4 Heat Pump DX Heating Coil, !- Name
ALWAYS_ON, !- Availability Schedule Name
AUTOSIZE, !- Gross Rated Heating Capacity {W}
3.3592, !- Gross Rated Heating COP {W/W}
AUTOSIZE, !- Rated Air Flow Rate {m3/s}
, !- Rated Supply Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC:4_CoolC-PSZ-AC:4_HeatCNode, !- Air Inlet Node Name
PSZ-AC:4_HeatC-PSZ-AC:4_SuppHeatingNode, !- Air Outlet Node Name
HPACHeatCapFT, !- Heating Capacity Function of Temperature Curve Name
HPACHeatCapFFF, !- Heating Capacity Function of Flow Fraction Curve Name
HPACHeatEIRFT, !- Energy Input Ratio Function of Temperature Curve Name
HPACHeatEIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
HPACCOOLPLFFPLR, !- Part Load Fraction Correlation Curve Name
HPACCOOLEIRFT, !- Defrost Energy Input Ratio Function of Temperature Curve Name
-12.2, !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C}
, !- Outdoor Dry-Bulb Temperature to Turn On Compressor {C}
1.67, !- Maximum Outdoor Dry-Bulb Temperature for Defrost Operation {C}
50.0, !- Crankcase Heater Capacity {W}
4.4, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C}
ReverseCycle, !- Defrost Strategy
OnDemand, !- Defrost Control
, !- Defrost Time Period Fraction
AUTOSIZE; !- Resistive Defrost Heater Capacity {W}
Coil:Heating:DX:SingleSpeed,
PSZ-AC:5 Heat Pump DX Heating Coil, !- Name
ALWAYS_ON, !- Availability Schedule Name
AUTOSIZE, !- Gross Rated Heating Capacity {W}
3.3592, !- Gross Rated Heating COP {W/W}
AUTOSIZE, !- Rated Air Flow Rate {m3/s}
, !- Rated Supply Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC:5_CoolC-PSZ-AC:5_HeatCNode, !- Air Inlet Node Name
PSZ-AC:5_HeatC-PSZ-AC:5_SuppHeatingNode, !- Air Outlet Node Name
HPACHeatCapFT, !- Heating Capacity Function of Temperature Curve Name
HPACHeatCapFFF, !- Heating Capacity Function of Flow Fraction Curve Name
HPACHeatEIRFT, !- Energy Input Ratio Function of Temperature Curve Name
HPACHeatEIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
HPACCOOLPLFFPLR, !- Part Load Fraction Correlation Curve Name
HPACCOOLEIRFT, !- Defrost Energy Input Ratio Function of Temperature Curve Name
-12.2, !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C}
, !- Outdoor Dry-Bulb Temperature to Turn On Compressor {C}
1.67, !- Maximum Outdoor Dry-Bulb Temperature for Defrost Operation {C}
50.0, !- Crankcase Heater Capacity {W}
4.4, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C}
ReverseCycle, !- Defrost Strategy
OnDemand, !- Defrost Control
, !- Defrost Time Period Fraction
AUTOSIZE; !- Resistive Defrost Heater Capacity {W}
!- =========== ALL OBJECTS IN CLASS: COIL:HEATING:GAS ===========
Coil:Heating:Fuel,
PSZ-AC:1 Heat Pump DX Supp Heating Coil, !- Name
ALWAYS_ON, !- Availability Schedule Name
NaturalGas, !- Fuel Type
0.81, !- Burner Efficiency
AUTOSIZE, !- Nominal Capacity {W}
PSZ-AC:1_HeatC-PSZ-AC:1_SuppHeatingNode, !- Air Inlet Node Name
PSZ-AC:1 Supply Equipment Outlet Node; !- Air Outlet Node Name
Coil:Heating:Fuel,
PSZ-AC:2 Heat Pump DX Supp Heating Coil, !- Name
ALWAYS_ON, !- Availability Schedule Name
NaturalGas, !- Fuel Type
0.81, !- Burner Efficiency
AUTOSIZE, !- Nominal Capacity {W}
PSZ-AC:2_HeatC-PSZ-AC:2_SuppHeatingNode, !- Air Inlet Node Name
PSZ-AC:2 Supply Equipment Outlet Node; !- Air Outlet Node Name
Coil:Heating:Fuel,
PSZ-AC:3 Heat Pump DX Supp Heating Coil, !- Name
ALWAYS_ON, !- Availability Schedule Name
NaturalGas, !- Fuel Type
0.81, !- Burner Efficiency
AUTOSIZE, !- Nominal Capacity {W}
PSZ-AC:3_HeatC-PSZ-AC:3_SuppHeatingNode, !- Air Inlet Node Name
PSZ-AC:3 Supply Equipment Outlet Node; !- Air Outlet Node Name
Coil:Heating:Fuel,
PSZ-AC:4 Heat Pump DX Supp Heating Coil, !- Name
ALWAYS_ON, !- Availability Schedule Name
NaturalGas, !- Fuel Type
0.81, !- Burner Efficiency
AUTOSIZE, !- Nominal Capacity {W}
PSZ-AC:4_HeatC-PSZ-AC:4_SuppHeatingNode, !- Air Inlet Node Name
PSZ-AC:4 Supply Equipment Outlet Node; !- Air Outlet Node Name
Coil:Heating:Fuel,
PSZ-AC:5 Heat Pump DX Supp Heating Coil, !- Name
ALWAYS_ON, !- Availability Schedule Name
NaturalGas, !- Fuel Type
0.81, !- Burner Efficiency
AUTOSIZE, !- Nominal Capacity {W}
PSZ-AC:5_HeatC-PSZ-AC:5_SuppHeatingNode, !- Air Inlet Node Name
PSZ-AC:5 Supply Equipment Outlet Node; !- Air Outlet Node Name
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:UNITARYCOOLONLY ===========
AirLoopHVAC:UnitaryHeatPump:AirToAir,
PSZ-AC:1_HeatPump, !- Name
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC:1_OA-PSZ-AC:1_FanNode, !- Air Inlet Node Name
PSZ-AC:1 Supply Equipment Outlet Node, !- Air Outlet Node Name
AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s}
AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s}
AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s}
Core_ZN, !- Controlling Zone or Thermostat Location
Fan:OnOff, !- Supply Air Fan Object Type
PSZ-AC:1 Fan, !- Supply Air Fan Name
Coil:Heating:DX:SingleSpeed, !- Heating Coil Object Type
PSZ-AC:1 Heat Pump DX Heating Coil, !- Heating Coil Name
Coil:Cooling:DX:SingleSpeed, !- Cooling Coil Object Type
PSZ-AC:1 Heat Pump DX Cooling Coil, !- Cooling Coil Name
Coil:Heating:Fuel, !- Supplemental Heating Coil Object Type
PSZ-AC:1 Heat Pump DX Supp Heating Coil, !- Supplemental Heating Coil Name
AUTOSIZE, !- Maximum Supply Air Temperature from Supplemental Heater {C}
4.44, !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C}
BlowThrough, !- Fan Placement
HVACOperationSchd; !- Supply Air Fan Operating Mode Schedule Name
AirLoopHVAC:UnitaryHeatPump:AirToAir,
PSZ-AC:2_HeatPump, !- Name
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC:2_OA-PSZ-AC:2_FanNode, !- Air Inlet Node Name
PSZ-AC:2 Supply Equipment Outlet Node, !- Air Outlet Node Name
AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s}
AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s}
AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s}
Perimeter_ZN_1, !- Controlling Zone or Thermostat Location
Fan:OnOff, !- Supply Air Fan Object Type
PSZ-AC:2 Fan, !- Supply Air Fan Name
Coil:Heating:DX:SingleSpeed, !- Heating Coil Object Type
PSZ-AC:2 Heat Pump DX Heating Coil, !- Heating Coil Name
Coil:Cooling:DX:SingleSpeed, !- Cooling Coil Object Type
PSZ-AC:2 Heat Pump DX Cooling Coil, !- Cooling Coil Name
Coil:Heating:Fuel, !- Supplemental Heating Coil Object Type
PSZ-AC:2 Heat Pump DX Supp Heating Coil, !- Supplemental Heating Coil Name
AUTOSIZE, !- Maximum Supply Air Temperature from Supplemental Heater {C}
4.44, !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C}
BlowThrough, !- Fan Placement
HVACOperationSchd; !- Supply Air Fan Operating Mode Schedule Name
AirLoopHVAC:UnitaryHeatPump:AirToAir,
PSZ-AC:3_HeatPump, !- Name
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC:3_OA-PSZ-AC:3_FanNode, !- Air Inlet Node Name
PSZ-AC:3 Supply Equipment Outlet Node, !- Air Outlet Node Name
AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s}
AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s}
AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s}
Perimeter_ZN_2, !- Controlling Zone or Thermostat Location
Fan:OnOff, !- Supply Air Fan Object Type
PSZ-AC:3 Fan, !- Supply Air Fan Name
Coil:Heating:DX:SingleSpeed, !- Heating Coil Object Type
PSZ-AC:3 Heat Pump DX Heating Coil, !- Heating Coil Name
Coil:Cooling:DX:SingleSpeed, !- Cooling Coil Object Type
PSZ-AC:3 Heat Pump DX Cooling Coil, !- Cooling Coil Name
Coil:Heating:Fuel, !- Supplemental Heating Coil Object Type
PSZ-AC:3 Heat Pump DX Supp Heating Coil, !- Supplemental Heating Coil Name
AUTOSIZE, !- Maximum Supply Air Temperature from Supplemental Heater {C}
4.44, !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C}
BlowThrough, !- Fan Placement
HVACOperationSchd_w_SB; !- Supply Air Fan Operating Mode Schedule Name
AirLoopHVAC:UnitaryHeatPump:AirToAir,
PSZ-AC:4_HeatPump, !- Name
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC:4_OA-PSZ-AC:4_FanNode, !- Air Inlet Node Name
PSZ-AC:4 Supply Equipment Outlet Node, !- Air Outlet Node Name
AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s}
AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s}
AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s}
Perimeter_ZN_3, !- Controlling Zone or Thermostat Location
Fan:OnOff, !- Supply Air Fan Object Type
PSZ-AC:4 Fan, !- Supply Air Fan Name
Coil:Heating:DX:SingleSpeed, !- Heating Coil Object Type
PSZ-AC:4 Heat Pump DX Heating Coil, !- Heating Coil Name
Coil:Cooling:DX:SingleSpeed, !- Cooling Coil Object Type
PSZ-AC:4 Heat Pump DX Cooling Coil, !- Cooling Coil Name
Coil:Heating:Fuel, !- Supplemental Heating Coil Object Type
PSZ-AC:4 Heat Pump DX Supp Heating Coil, !- Supplemental Heating Coil Name
AUTOSIZE, !- Maximum Supply Air Temperature from Supplemental Heater {C}
4.44, !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C}
BlowThrough, !- Fan Placement
HVACOperationSchd; !- Supply Air Fan Operating Mode Schedule Name
AirLoopHVAC:UnitaryHeatPump:AirToAir,
PSZ-AC:5_HeatPump, !- Name
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC:5_OA-PSZ-AC:5_FanNode, !- Air Inlet Node Name
PSZ-AC:5 Supply Equipment Outlet Node, !- Air Outlet Node Name
AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s}
AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s}
AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s}
Perimeter_ZN_4, !- Controlling Zone or Thermostat Location
Fan:OnOff, !- Supply Air Fan Object Type
PSZ-AC:5 Fan, !- Supply Air Fan Name
Coil:Heating:DX:SingleSpeed, !- Heating Coil Object Type
PSZ-AC:5 Heat Pump DX Heating Coil, !- Heating Coil Name
Coil:Cooling:DX:SingleSpeed, !- Cooling Coil Object Type
PSZ-AC:5 Heat Pump DX Cooling Coil, !- Cooling Coil Name
Coil:Heating:Fuel, !- Supplemental Heating Coil Object Type
PSZ-AC:5 Heat Pump DX Supp Heating Coil, !- Supplemental Heating Coil Name
AUTOSIZE, !- Maximum Supply Air Temperature from Supplemental Heater {C}
4.44, !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C}
BlowThrough, !- Fan Placement
HVACOperationSchd; !- Supply Air Fan Operating Mode Schedule Name
!- =========== ALL OBJECTS IN CLASS: CONTROLLER:OUTDOORAIR ===========
Controller:OutdoorAir,
PSZ-AC:1_OA_Controller, !- Name
PSZ-AC:1_OARelief Node, !- Relief Air Outlet Node Name
PSZ-AC:1 Supply Equipment Inlet Node, !- Return Air Node Name
PSZ-AC:1_OA-PSZ-AC:1_FanNode, !- Mixed Air Node Name
PSZ-AC:1_OAInlet Node, !- Actuator Node Name
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
NoEconomizer, !- Economizer Control Type
ModulateFlow, !- Economizer Control Action Type
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
, !- Economizer Maximum Limit Dewpoint Temperature {C}
, !- Electronic Enthalpy Limit Curve Name
0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
LockoutWithHeating, !- Lockout Type
FixedMinimum, !- Minimum Limit Type
MinOA_MotorizedDamper_Sched; !- Minimum Outdoor Air Schedule Name
Controller:OutdoorAir,
PSZ-AC:2_OA_Controller, !- Name
PSZ-AC:2_OARelief Node, !- Relief Air Outlet Node Name
PSZ-AC:2 Supply Equipment Inlet Node, !- Return Air Node Name
PSZ-AC:2_OA-PSZ-AC:2_FanNode, !- Mixed Air Node Name
PSZ-AC:2_OAInlet Node, !- Actuator Node Name
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
NoEconomizer, !- Economizer Control Type
ModulateFlow, !- Economizer Control Action Type
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
, !- Economizer Maximum Limit Dewpoint Temperature {C}
, !- Electronic Enthalpy Limit Curve Name
0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
LockoutWithHeating, !- Lockout Type
FixedMinimum, !- Minimum Limit Type
MinOA_MotorizedDamper_Sched; !- Minimum Outdoor Air Schedule Name
Controller:OutdoorAir,
PSZ-AC:3_OA_Controller, !- Name
PSZ-AC:3_OARelief Node, !- Relief Air Outlet Node Name
PSZ-AC:3 Supply Equipment Inlet Node, !- Return Air Node Name
PSZ-AC:3_OA-PSZ-AC:3_FanNode, !- Mixed Air Node Name
PSZ-AC:3_OAInlet Node, !- Actuator Node Name
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
NoEconomizer, !- Economizer Control Type
ModulateFlow, !- Economizer Control Action Type
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
, !- Economizer Maximum Limit Dewpoint Temperature {C}
, !- Electronic Enthalpy Limit Curve Name
0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
LockoutWithHeating, !- Lockout Type
FixedMinimum, !- Minimum Limit Type
MinOA_MotorizedDamper_Sched; !- Minimum Outdoor Air Schedule Name
Controller:OutdoorAir,
PSZ-AC:4_OA_Controller, !- Name
PSZ-AC:4_OARelief Node, !- Relief Air Outlet Node Name
PSZ-AC:4 Supply Equipment Inlet Node, !- Return Air Node Name
PSZ-AC:4_OA-PSZ-AC:4_FanNode, !- Mixed Air Node Name
PSZ-AC:4_OAInlet Node, !- Actuator Node Name
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
NoEconomizer, !- Economizer Control Type
ModulateFlow, !- Economizer Control Action Type
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
, !- Economizer Maximum Limit Dewpoint Temperature {C}
, !- Electronic Enthalpy Limit Curve Name
0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
LockoutWithHeating, !- Lockout Type
FixedMinimum, !- Minimum Limit Type
MinOA_MotorizedDamper_Sched; !- Minimum Outdoor Air Schedule Name
Controller:OutdoorAir,
PSZ-AC:5_OA_Controller, !- Name
PSZ-AC:5_OARelief Node, !- Relief Air Outlet Node Name
PSZ-AC:5 Supply Equipment Inlet Node, !- Return Air Node Name
PSZ-AC:5_OA-PSZ-AC:5_FanNode, !- Mixed Air Node Name
PSZ-AC:5_OAInlet Node, !- Actuator Node Name
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
NoEconomizer, !- Economizer Control Type
ModulateFlow, !- Economizer Control Action Type
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
, !- Economizer Maximum Limit Dewpoint Temperature {C}
, !- Electronic Enthalpy Limit Curve Name
0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
LockoutWithHeating, !- Lockout Type
FixedMinimum, !- Minimum Limit Type
MinOA_MotorizedDamper_Sched; !- Minimum Outdoor Air Schedule Name
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:CONTROLLERLIST ===========
AirLoopHVAC:ControllerList,
PSZ-AC:1_OA_Controllers, !- Name
Controller:OutdoorAir, !- Controller 1 Object Type
PSZ-AC:1_OA_Controller; !- Controller 1 Name
AirLoopHVAC:ControllerList,
PSZ-AC:2_OA_Controllers, !- Name
Controller:OutdoorAir, !- Controller 1 Object Type
PSZ-AC:2_OA_Controller; !- Controller 1 Name
AirLoopHVAC:ControllerList,
PSZ-AC:3_OA_Controllers, !- Name
Controller:OutdoorAir, !- Controller 1 Object Type
PSZ-AC:3_OA_Controller; !- Controller 1 Name
AirLoopHVAC:ControllerList,
PSZ-AC:4_OA_Controllers, !- Name
Controller:OutdoorAir, !- Controller 1 Object Type
PSZ-AC:4_OA_Controller; !- Controller 1 Name
AirLoopHVAC:ControllerList,
PSZ-AC:5_OA_Controllers, !- Name
Controller:OutdoorAir, !- Controller 1 Object Type
PSZ-AC:5_OA_Controller; !- Controller 1 Name
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC ===========
AirLoopHVAC,
PSZ-AC:1, !- Name
, !- Controller List Name
PSZ-AC:1 Availability Manager List, !- Availability Manager List Name
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
PSZ-AC:1 Air Loop Branches, !- Branch List Name
, !- Connector List Name
PSZ-AC:1 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
PSZ-AC:1 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
PSZ-AC:1 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
PSZ-AC:1 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
AirLoopHVAC,
PSZ-AC:2, !- Name
, !- Controller List Name
PSZ-AC:2 Availability Manager List, !- Availability Manager List Name
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
PSZ-AC:2 Air Loop Branches, !- Branch List Name
, !- Connector List Name
PSZ-AC:2 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
PSZ-AC:2 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
PSZ-AC:2 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
PSZ-AC:2 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
AirLoopHVAC,
PSZ-AC:3, !- Name
, !- Controller List Name
PSZ-AC:3 Availability Manager List, !- Availability Manager List Name
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
PSZ-AC:3 Air Loop Branches, !- Branch List Name
, !- Connector List Name
PSZ-AC:3 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
PSZ-AC:3 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
PSZ-AC:3 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
PSZ-AC:3 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
AirLoopHVAC,
PSZ-AC:4, !- Name
, !- Controller List Name
PSZ-AC:4 Availability Manager List, !- Availability Manager List Name
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
PSZ-AC:4 Air Loop Branches, !- Branch List Name
, !- Connector List Name
PSZ-AC:4 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
PSZ-AC:4 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
PSZ-AC:4 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
PSZ-AC:4 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
AirLoopHVAC,
PSZ-AC:5, !- Name
, !- Controller List Name
PSZ-AC:5 Availability Manager List, !- Availability Manager List Name
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
PSZ-AC:5 Air Loop Branches, !- Branch List Name
, !- Connector List Name
PSZ-AC:5 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
PSZ-AC:5 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
PSZ-AC:5 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
PSZ-AC:5 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:OUTDOORAIRSYSTEM:EQUIPMENTLIST ===========
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
PSZ-AC:1_OA_Equipment, !- Name
OutdoorAir:Mixer, !- Component 1 Object Type
PSZ-AC:1_OAMixing Box; !- Component 1 Name
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
PSZ-AC:2_OA_Equipment, !- Name
OutdoorAir:Mixer, !- Component 1 Object Type
PSZ-AC:2_OAMixing Box; !- Component 1 Name
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
PSZ-AC:3_OA_Equipment, !- Name
OutdoorAir:Mixer, !- Component 1 Object Type
PSZ-AC:3_OAMixing Box; !- Component 1 Name
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
PSZ-AC:4_OA_Equipment, !- Name
OutdoorAir:Mixer, !- Component 1 Object Type
PSZ-AC:4_OAMixing Box; !- Component 1 Name
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
PSZ-AC:5_OA_Equipment, !- Name
OutdoorAir:Mixer, !- Component 1 Object Type
PSZ-AC:5_OAMixing Box; !- Component 1 Name
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:OUTDOORAIRSYSTEM ===========
AirLoopHVAC:OutdoorAirSystem,
PSZ-AC:1_OA, !- Name
PSZ-AC:1_OA_Controllers, !- Controller List Name
PSZ-AC:1_OA_Equipment, !- Outdoor Air Equipment List Name
PSZ-AC:1 Availability Manager List; !- Availability Manager List Name
AirLoopHVAC:OutdoorAirSystem,
PSZ-AC:2_OA, !- Name
PSZ-AC:2_OA_Controllers, !- Controller List Name
PSZ-AC:2_OA_Equipment, !- Outdoor Air Equipment List Name
PSZ-AC:2 Availability Manager List; !- Availability Manager List Name
AirLoopHVAC:OutdoorAirSystem,
PSZ-AC:3_OA, !- Name
PSZ-AC:3_OA_Controllers, !- Controller List Name
PSZ-AC:3_OA_Equipment, !- Outdoor Air Equipment List Name
PSZ-AC:3 Availability Manager List; !- Availability Manager List Name
AirLoopHVAC:OutdoorAirSystem,
PSZ-AC:4_OA, !- Name
PSZ-AC:4_OA_Controllers, !- Controller List Name
PSZ-AC:4_OA_Equipment, !- Outdoor Air Equipment List Name
PSZ-AC:4 Availability Manager List; !- Availability Manager List Name
AirLoopHVAC:OutdoorAirSystem,
PSZ-AC:5_OA, !- Name
PSZ-AC:5_OA_Controllers, !- Controller List Name
PSZ-AC:5_OA_Equipment, !- Outdoor Air Equipment List Name
PSZ-AC:5 Availability Manager List; !- Availability Manager List Name
!- =========== ALL OBJECTS IN CLASS: OUTDOORAIR:MIXER ===========
OutdoorAir:Mixer,
PSZ-AC:1_OAMixing Box, !- Name
PSZ-AC:1_OA-PSZ-AC:1_FanNode, !- Mixed Air Node Name
PSZ-AC:1_OAInlet Node, !- Outdoor Air Stream Node Name
PSZ-AC:1_OARelief Node, !- Relief Air Stream Node Name
PSZ-AC:1 Supply Equipment Inlet Node; !- Return Air Stream Node Name
OutdoorAir:Mixer,
PSZ-AC:2_OAMixing Box, !- Name
PSZ-AC:2_OA-PSZ-AC:2_FanNode, !- Mixed Air Node Name
PSZ-AC:2_OAInlet Node, !- Outdoor Air Stream Node Name
PSZ-AC:2_OARelief Node, !- Relief Air Stream Node Name
PSZ-AC:2 Supply Equipment Inlet Node; !- Return Air Stream Node Name
OutdoorAir:Mixer,
PSZ-AC:3_OAMixing Box, !- Name
PSZ-AC:3_OA-PSZ-AC:3_FanNode, !- Mixed Air Node Name
PSZ-AC:3_OAInlet Node, !- Outdoor Air Stream Node Name
PSZ-AC:3_OARelief Node, !- Relief Air Stream Node Name
PSZ-AC:3 Supply Equipment Inlet Node; !- Return Air Stream Node Name
OutdoorAir:Mixer,
PSZ-AC:4_OAMixing Box, !- Name
PSZ-AC:4_OA-PSZ-AC:4_FanNode, !- Mixed Air Node Name
PSZ-AC:4_OAInlet Node, !- Outdoor Air Stream Node Name
PSZ-AC:4_OARelief Node, !- Relief Air Stream Node Name
PSZ-AC:4 Supply Equipment Inlet Node; !- Return Air Stream Node Name
OutdoorAir:Mixer,
PSZ-AC:5_OAMixing Box, !- Name
PSZ-AC:5_OA-PSZ-AC:5_FanNode, !- Mixed Air Node Name
PSZ-AC:5_OAInlet Node, !- Outdoor Air Stream Node Name
PSZ-AC:5_OARelief Node, !- Relief Air Stream Node Name
PSZ-AC:5 Supply Equipment Inlet Node; !- Return Air Stream Node Name
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:ZONESPLITTER ===========
AirLoopHVAC:ZoneSplitter,
PSZ-AC:1 Supply Air Splitter, !- Name
PSZ-AC:1 Zone Equipment Inlet Node, !- Inlet Node Name
Core_ZN Direct Air Inlet Node Name; !- Outlet 1 Node Name
AirLoopHVAC:ZoneSplitter,
PSZ-AC:2 Supply Air Splitter, !- Name
PSZ-AC:2 Zone Equipment Inlet Node, !- Inlet Node Name
Perimeter_ZN_1 Direct Air Inlet Node Name; !- Outlet 1 Node Name
AirLoopHVAC:ZoneSplitter,
PSZ-AC:3 Supply Air Splitter, !- Name
PSZ-AC:3 Zone Equipment Inlet Node, !- Inlet Node Name
Perimeter_ZN_2 Direct Air Inlet Node Name; !- Outlet 1 Node Name
AirLoopHVAC:ZoneSplitter,
PSZ-AC:4 Supply Air Splitter, !- Name
PSZ-AC:4 Zone Equipment Inlet Node, !- Inlet Node Name
Perimeter_ZN_3 Direct Air Inlet Node Name; !- Outlet 1 Node Name
AirLoopHVAC:ZoneSplitter,
PSZ-AC:5 Supply Air Splitter, !- Name
PSZ-AC:5 Zone Equipment Inlet Node, !- Inlet Node Name
Perimeter_ZN_4 Direct Air Inlet Node Name; !- Outlet 1 Node Name
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:SUPPLYPATH ===========
AirLoopHVAC:SupplyPath,
PSZ-AC:1, !- Name
PSZ-AC:1 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
PSZ-AC:1 Supply Air Splitter; !- Component 1 Name
AirLoopHVAC:SupplyPath,
PSZ-AC:2, !- Name
PSZ-AC:2 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
PSZ-AC:2 Supply Air Splitter; !- Component 1 Name
AirLoopHVAC:SupplyPath,
PSZ-AC:3, !- Name
PSZ-AC:3 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
PSZ-AC:3 Supply Air Splitter; !- Component 1 Name
AirLoopHVAC:SupplyPath,
PSZ-AC:4, !- Name
PSZ-AC:4 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
PSZ-AC:4 Supply Air Splitter; !- Component 1 Name
AirLoopHVAC:SupplyPath,
PSZ-AC:5, !- Name
PSZ-AC:5 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
PSZ-AC:5 Supply Air Splitter; !- Component 1 Name
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:ZONEMIXER ===========
AirLoopHVAC:ZoneMixer,
PSZ-AC:1 Return Air Mixer, !- Name
PSZ-AC:1 Zone Equipment Outlet Node, !- Outlet Node Name
Core_ZN Return Air Node Name; !- Inlet 1 Node Name
AirLoopHVAC:ZoneMixer,
PSZ-AC:2 Return Air Mixer, !- Name
PSZ-AC:2 Zone Equipment Outlet Node, !- Outlet Node Name
Perimeter_ZN_1 Return Air Node Name; !- Inlet 1 Node Name
AirLoopHVAC:ZoneMixer,
PSZ-AC:3 Return Air Mixer, !- Name
PSZ-AC:3 Zone Equipment Outlet Node, !- Outlet Node Name
Perimeter_ZN_2 Return Air Node Name; !- Inlet 1 Node Name
AirLoopHVAC:ZoneMixer,
PSZ-AC:4 Return Air Mixer, !- Name
PSZ-AC:4 Zone Equipment Outlet Node, !- Outlet Node Name
Perimeter_ZN_3 Return Air Node Name; !- Inlet 1 Node Name
AirLoopHVAC:ZoneMixer,
PSZ-AC:5 Return Air Mixer, !- Name
PSZ-AC:5 Zone Equipment Outlet Node, !- Outlet Node Name
Perimeter_ZN_4 Return Air Node Name; !- Inlet 1 Node Name
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:RETURNPATH ===========
AirLoopHVAC:ReturnPath,
PSZ-AC:1 Return Air Path,!- Name
PSZ-AC:1 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
PSZ-AC:1 Return Air Mixer; !- Component 1 Name
AirLoopHVAC:ReturnPath,
PSZ-AC:2 Return Air Path,!- Name
PSZ-AC:2 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
PSZ-AC:2 Return Air Mixer; !- Component 1 Name
AirLoopHVAC:ReturnPath,
PSZ-AC:3 Return Air Path,!- Name
PSZ-AC:3 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
PSZ-AC:3 Return Air Mixer; !- Component 1 Name
AirLoopHVAC:ReturnPath,
PSZ-AC:4 Return Air Path,!- Name
PSZ-AC:4 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
PSZ-AC:4 Return Air Mixer; !- Component 1 Name
AirLoopHVAC:ReturnPath,
PSZ-AC:5 Return Air Path,!- Name
PSZ-AC:5 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
PSZ-AC:5 Return Air Mixer; !- Component 1 Name
!- =========== ALL OBJECTS IN CLASS: BRANCH ===========
Branch,
PSZ-AC:1 Air Loop Main Branch, !- Name
, !- Pressure Drop Curve Name
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
PSZ-AC:1_OA, !- Component 1 Name
PSZ-AC:1 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
PSZ-AC:1_OA-PSZ-AC:1_FanNode, !- Component 1 Outlet Node Name
AirLoopHVAC:UnitaryHeatPump:AirToAir, !- Component 2 Object Type
PSZ-AC:1_HeatPump, !- Component 2 Name
PSZ-AC:1_OA-PSZ-AC:1_FanNode, !- Component 2 Inlet Node Name
PSZ-AC:1 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name
Branch,
PSZ-AC:2 Air Loop Main Branch, !- Name
, !- Pressure Drop Curve Name
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
PSZ-AC:2_OA, !- Component 1 Name
PSZ-AC:2 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
PSZ-AC:2_OA-PSZ-AC:2_FanNode, !- Component 1 Outlet Node Name
AirLoopHVAC:UnitaryHeatPump:AirToAir, !- Component 2 Object Type
PSZ-AC:2_HeatPump, !- Component 2 Name
PSZ-AC:2_OA-PSZ-AC:2_FanNode, !- Component 2 Inlet Node Name
PSZ-AC:2 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name
Branch,
PSZ-AC:3 Air Loop Main Branch, !- Name
, !- Pressure Drop Curve Name
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
PSZ-AC:3_OA, !- Component 1 Name
PSZ-AC:3 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
PSZ-AC:3_OA-PSZ-AC:3_FanNode, !- Component 1 Outlet Node Name
AirLoopHVAC:UnitaryHeatPump:AirToAir, !- Component 2 Object Type
PSZ-AC:3_HeatPump, !- Component 2 Name
PSZ-AC:3_OA-PSZ-AC:3_FanNode, !- Component 2 Inlet Node Name
PSZ-AC:3 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name
Branch,
PSZ-AC:4 Air Loop Main Branch, !- Name
, !- Pressure Drop Curve Name
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
PSZ-AC:4_OA, !- Component 1 Name
PSZ-AC:4 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
PSZ-AC:4_OA-PSZ-AC:4_FanNode, !- Component 1 Outlet Node Name
AirLoopHVAC:UnitaryHeatPump:AirToAir, !- Component 2 Object Type
PSZ-AC:4_HeatPump, !- Component 2 Name
PSZ-AC:4_OA-PSZ-AC:4_FanNode, !- Component 2 Inlet Node Name
PSZ-AC:4 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name
Branch,
PSZ-AC:5 Air Loop Main Branch, !- Name
, !- Pressure Drop Curve Name
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
PSZ-AC:5_OA, !- Component 1 Name
PSZ-AC:5 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
PSZ-AC:5_OA-PSZ-AC:5_FanNode, !- Component 1 Outlet Node Name
AirLoopHVAC:UnitaryHeatPump:AirToAir, !- Component 2 Object Type
PSZ-AC:5_HeatPump, !- Component 2 Name
PSZ-AC:5_OA-PSZ-AC:5_FanNode, !- Component 2 Inlet Node Name
PSZ-AC:5 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name
Branch,
SHWSys1 Supply Inlet Branch, !- Name
, !- Pressure Drop Curve Name
Pump:ConstantSpeed, !- Component 1 Object Type
SHWSys1 Pump, !- Component 1 Name
SHWSys1 Supply Inlet Node, !- Component 1 Inlet Node Name
SHWSys1 Pump-SHWSys1 Water HeaterNodeviaConnector; !- Component 1 Outlet Node Name
Branch,
SHWSys1 Supply Equipment Branch, !- Name
, !- Pressure Drop Curve Name
WaterHeater:Mixed, !- Component 1 Object Type
SHWSys1 Water Heater, !- Component 1 Name
SHWSys1 Pump-SHWSys1 Water HeaterNode, !- Component 1 Inlet Node Name
SHWSys1 Supply Equipment Outlet Node; !- Component 1 Outlet Node Name
Branch,
SHWSys1 Supply Equipment Bypass Branch, !- Name
, !- Pressure Drop Curve Name
Pipe:Adiabatic, !- Component 1 Object Type
SHWSys1 Supply Equipment Bypass Pipe, !- Component 1 Name
SHWSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name
SHWSys1 Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name
Branch,
SHWSys1 Supply Outlet Branch, !- Name
, !- Pressure Drop Curve Name
Pipe:Adiabatic, !- Component 1 Object Type
SHWSys1 Supply Outlet Pipe, !- Component 1 Name
SHWSys1 Supply Mixer-SHWSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name
SHWSys1 Supply Outlet Node; !- Component 1 Outlet Node Name
Branch,
SHWSys1 Demand Inlet Branch, !- Name
, !- Pressure Drop Curve Name
Pipe:Adiabatic, !- Component 1 Object Type
SHWSys1 Demand Inlet Pipe, !- Component 1 Name
SHWSys1 Demand Inlet Node, !- Component 1 Inlet Node Name
SHWSys1 Demand Inlet Pipe-SHWSys1 Demand Mixer; !- Component 1 Outlet Node Name
Branch,
SHWSys1 Demand Load Branch 1, !- Name
, !- Pressure Drop Curve Name
WaterUse:Connections, !- Component 1 Object Type
Core_ZN Water Equipment, !- Component 1 Name
Core_ZN Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
Core_ZN Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
Branch,
SHWSys1 Demand Bypass Branch, !- Name
, !- Pressure Drop Curve Name
Pipe:Adiabatic, !- Component 1 Object Type
SHWSys1 Demand Bypass Pipe, !- Component 1 Name
SHWSys1 Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name
SHWSys1 Demand Bypass Pipe Outlet Node; !- Component 1 Outlet Node Name
Branch,
SHWSys1 Demand Outlet Branch, !- Name
, !- Pressure Drop Curve Name
Pipe:Adiabatic, !- Component 1 Object Type
SHWSys1 Demand Outlet Pipe, !- Component 1 Name
SHWSys1 Demand Mixer-SHWSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name
SHWSys1 Demand Outlet Node; !- Component 1 Outlet Node Name
!- =========== ALL OBJECTS IN CLASS: BRANCHLIST ===========
BranchList,
PSZ-AC:1 Air Loop Branches, !- Name
PSZ-AC:1 Air Loop Main Branch; !- Branch 1 Name
BranchList,
PSZ-AC:2 Air Loop Branches, !- Name
PSZ-AC:2 Air Loop Main Branch; !- Branch 1 Name
BranchList,
PSZ-AC:3 Air Loop Branches, !- Name
PSZ-AC:3 Air Loop Main Branch; !- Branch 1 Name
BranchList,
PSZ-AC:4 Air Loop Branches, !- Name
PSZ-AC:4 Air Loop Main Branch; !- Branch 1 Name
BranchList,
PSZ-AC:5 Air Loop Branches, !- Name
PSZ-AC:5 Air Loop Main Branch; !- Branch 1 Name
BranchList,
SHWSys1 Supply Branches, !- Name
SHWSys1 Supply Inlet Branch, !- Branch 1 Name
SHWSys1 Supply Equipment Branch, !- Branch 2 Name
SHWSys1 Supply Equipment Bypass Branch, !- Branch 3 Name
SHWSys1 Supply Outlet Branch; !- Branch 4 Name
BranchList,
SHWSys1 Demand Branches, !- Name
SHWSys1 Demand Inlet Branch, !- Branch 1 Name
SHWSys1 Demand Load Branch 1, !- Branch 2 Name
SHWSys1 Demand Bypass Branch, !- Branch 3 Name
SHWSys1 Demand Outlet Branch; !- Branch 4 Name
!- =========== ALL OBJECTS IN CLASS: CONNECTOR:SPLITTER ===========
Connector:Splitter,
SHWSys1 Supply Splitter, !- Name
SHWSys1 Supply Inlet Branch, !- Inlet Branch Name
SHWSys1 Supply Equipment Branch, !- Outlet Branch 1 Name
SHWSys1 Supply Equipment Bypass Branch; !- Outlet Branch 2 Name
Connector:Splitter,
SHWSys1 Demand Splitter, !- Name
SHWSys1 Demand Inlet Branch, !- Inlet Branch Name
SHWSys1 Demand Load Branch 1, !- Outlet Branch 1 Name
SHWSys1 Demand Bypass Branch; !- Outlet Branch 2 Name
!- =========== ALL OBJECTS IN CLASS: CONNECTOR:MIXER ===========
Connector:Mixer,
SHWSys1 Supply Mixer, !- Name
SHWSys1 Supply Outlet Branch, !- Outlet Branch Name
SHWSys1 Supply Equipment Branch, !- Inlet Branch 1 Name
SHWSys1 Supply Equipment Bypass Branch; !- Inlet Branch 2 Name
Connector:Mixer,
SHWSys1 Demand Mixer, !- Name
SHWSys1 Demand Outlet Branch, !- Outlet Branch Name
SHWSys1 Demand Load Branch 1, !- Inlet Branch 1 Name
SHWSys1 Demand Bypass Branch; !- Inlet Branch 2 Name
!- =========== ALL OBJECTS IN CLASS: CONNECTORLIST ===========
ConnectorList,
SHWSys1 Supply Connectors, !- Name
Connector:Splitter, !- Connector 1 Object Type
SHWSys1 Supply Splitter, !- Connector 1 Name
Connector:Mixer, !- Connector 2 Object Type
SHWSys1 Supply Mixer; !- Connector 2 Name
ConnectorList,
SHWSys1 Demand Connectors, !- Name
Connector:Splitter, !- Connector 1 Object Type
SHWSys1 Demand Splitter, !- Connector 1 Name
Connector:Mixer, !- Connector 2 Object Type
SHWSys1 Demand Mixer; !- Connector 2 Name
!- =========== ALL OBJECTS IN CLASS: NODELIST ===========
NodeList,
Core_ZN Inlet Nodes, !- Name
Core_ZN Direct Air Inlet Node Name; !- Node 1 Name
NodeList,
Perimeter_ZN_1 Inlet Nodes, !- Name
Perimeter_ZN_1 Direct Air Inlet Node Name; !- Node 1 Name
NodeList,
Perimeter_ZN_2 Inlet Nodes, !- Name
Perimeter_ZN_2 Direct Air Inlet Node Name; !- Node 1 Name
NodeList,
Perimeter_ZN_3 Inlet Nodes, !- Name
Perimeter_ZN_3 Direct Air Inlet Node Name; !- Node 1 Name
NodeList,
Perimeter_ZN_4 Inlet Nodes, !- Name
Perimeter_ZN_4 Direct Air Inlet Node Name; !- Node 1 Name
NodeList,
PSZ-AC:1_OANode List, !- Name
PSZ-AC:1_OAInlet Node; !- Node 1 Name
NodeList,
PSZ-AC:2_OANode List, !- Name
PSZ-AC:2_OAInlet Node; !- Node 1 Name
NodeList,
PSZ-AC:3_OANode List, !- Name
PSZ-AC:3_OAInlet Node; !- Node 1 Name
NodeList,
PSZ-AC:4_OANode List, !- Name
PSZ-AC:4_OAInlet Node; !- Node 1 Name
NodeList,
PSZ-AC:5_OANode List, !- Name
PSZ-AC:5_OAInlet Node; !- Node 1 Name
!- =========== ALL OBJECTS IN CLASS: OUTDOORAIR:NODE ===========
OutdoorAir:Node,
PSZ-AC:1_CoolCOA Ref node; !- Name
OutdoorAir:Node,
PSZ-AC:2_CoolCOA Ref node; !- Name
OutdoorAir:Node,
PSZ-AC:3_CoolCOA Ref node; !- Name
OutdoorAir:Node,
PSZ-AC:4_CoolCOA Ref node; !- Name
OutdoorAir:Node,
PSZ-AC:5_CoolCOA Ref node; !- Name
!- =========== ALL OBJECTS IN CLASS: OUTDOORAIR:NODELIST ===========
OutdoorAir:NodeList,
PSZ-AC:1_OANode List; !- Node or NodeList Name 1
OutdoorAir:NodeList,
PSZ-AC:2_OANode List; !- Node or NodeList Name 1
OutdoorAir:NodeList,
PSZ-AC:3_OANode List; !- Node or NodeList Name 1
OutdoorAir:NodeList,
PSZ-AC:4_OANode List; !- Node or NodeList Name 1
OutdoorAir:NodeList,
PSZ-AC:5_OANode List; !- Node or NodeList Name 1
!- =========== ALL OBJECTS IN CLASS: PUMP:CONSTANTSPEED ===========
Pump:ConstantSpeed,
SHWSys1 Pump, !- Name
SHWSys1 Supply Inlet Node, !- Inlet Node Name
SHWSys1 Pump-SHWSys1 Water HeaterNodeviaConnector, !- Outlet Node Name
autosize, !- Design Flow Rate {m3/s}
0.001, !- Design Pump Head {Pa}
AUTOSIZE, !- Design Power Consumption {W}
0.30, !- Motor Efficiency
0.0, !- Fraction of Motor Inefficiencies to Fluid Stream
Intermittent; !- Pump Control Type
!- =========== ALL OBJECTS IN CLASS: WATERHEATER:MIXED ===========
WaterHeater:Mixed,
SHWSys1 Water Heater, !- Name
0.1514, !- Tank Volume {m3}
SHWSys1 Water Heater Setpoint Temperature Schedule, !- Setpoint Temperature Schedule Name
2.0, !- Deadband Temperature Difference {deltaC}
82.2222, !- Maximum Temperature Limit {C}
Cycle, !- Heater Control Type
11722.84, !- Heater Maximum Capacity {W}
, !- Heater Minimum Capacity {W}
, !- Heater Ignition Minimum Flow Rate {m3/s}
, !- Heater Ignition Delay {s}
electricity, !- Heater Fuel Type
1, !- Heater Thermal Efficiency
, !- Part Load Factor Curve Name
571, !- Off Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 31, 2012 Specify pipe loss for both Off and On cycle parasitic
electricity, !- Off Cycle Parasitic Fuel Type
0.8, !- Off Cycle Parasitic Heat Fraction to Tank
571, !- On Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) July 26, 2012: changed from blank to 309 btu/h (90.56 W) for On Cycle Parasitic load to account for pipe loss
electricity, !- On Cycle Parasitic Fuel Type
, !- On Cycle Parasitic Heat Fraction to Tank
zone, !- Ambient Temperature Indicator
, !- Ambient Temperature Schedule Name
CORE_ZN, !- Ambient Temperature Zone Name
, !- Ambient Temperature Outdoor Air Node Name
1.205980747, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K}
, !- Off Cycle Loss Fraction to Zone
1.205980747, !- On Cycle Loss Coefficient to Ambient Temperature {W/K}
, !- On Cycle Loss Fraction to Zone
4.048e-06, !- Peak Flow Rate {m3/s}
BLDG_SWH_SCH; !- Use Flow Rate Fraction Schedule Name
!- =========== ALL OBJECTS IN CLASS: PLANTLOOP ===========
PlantLoop,
SHWSys1, !- Name
Water, !- Fluid Type
, !- User Defined Fluid Type
SHWSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name
SHWSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name
48.89, !- Maximum Loop Temperature {C}
10.0, !- Minimum Loop Temperature {C}
AUTOSIZE, !- Maximum Loop Flow Rate {m3/s}
0.0, !- Minimum Loop Flow Rate {m3/s}
AUTOSIZE, !- Plant Loop Volume {m3}
SHWSys1 Supply Inlet Node, !- Plant Side Inlet Node Name
SHWSys1 Supply Outlet Node, !- Plant Side Outlet Node Name
SHWSys1 Supply Branches, !- Plant Side Branch List Name
SHWSys1 Supply Connectors, !- Plant Side Connector List Name
SHWSys1 Demand Inlet Node, !- Demand Side Inlet Node Name
SHWSys1 Demand Outlet Node, !- Demand Side Outlet Node Name
SHWSys1 Demand Branches, !- Demand Side Branch List Name
SHWSys1 Demand Connectors, !- Demand Side Connector List Name
Optimal; !- Load Distribution Scheme
!- =========== ALL OBJECTS IN CLASS: PIPE:ADIABATIC ===========
Pipe:Adiabatic,
SHWSys1 Supply Equipment Bypass Pipe, !- Name
SHWSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name
SHWSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name
Pipe:Adiabatic,
SHWSys1 Supply Outlet Pipe, !- Name
SHWSys1 Supply Mixer-SHWSys1 Supply Outlet Pipe, !- Inlet Node Name
SHWSys1 Supply Outlet Node; !- Outlet Node Name
Pipe:Adiabatic,
SHWSys1 Demand Inlet Pipe, !- Name
SHWSys1 Demand Inlet Node, !- Inlet Node Name
SHWSys1 Demand Inlet Pipe-SHWSys1 Demand Mixer; !- Outlet Node Name
Pipe:Adiabatic,
SHWSys1 Demand Bypass Pipe, !- Name
SHWSys1 Demand Bypass Pipe Inlet Node, !- Inlet Node Name
SHWSys1 Demand Bypass Pipe Outlet Node; !- Outlet Node Name
Pipe:Adiabatic,
SHWSys1 Demand Outlet Pipe, !- Name
SHWSys1 Demand Mixer-SHWSys1 Demand Outlet Pipe, !- Inlet Node Name
SHWSys1 Demand Outlet Node; !- Outlet Node Name
!- =========== ALL OBJECTS IN CLASS: PLANTEQUIPMENTLIST ===========
PlantEquipmentList,
SHWSys1 Equipment List, !- Name
WaterHeater:Mixed, !- Equipment 1 Object Type
SHWSys1 Water Heater; !- Equipment 1 Name
!- =========== ALL OBJECTS IN CLASS: PLANTEQUIPMENTOPERATION:HEATINGLOAD ===========
PlantEquipmentOperation:HeatingLoad,
SHWSys1 Operation Scheme,!- Name
0.0, !- Load Range 1 Lower Limit {W}
1000000000000000, !- Load Range 1 Upper Limit {W}
SHWSys1 Equipment List; !- Range 1 Equipment List Name
!- =========== ALL OBJECTS IN CLASS: PLANTEQUIPMENTOPERATIONSCHEMES ===========
PlantEquipmentOperationSchemes,
SHWSys1 Loop Operation Scheme List, !- Name
PlantEquipmentOperation:HeatingLoad, !- Control Scheme 1 Object Type
SHWSys1 Operation Scheme,!- Control Scheme 1 Name
PlantOnSched; !- Control Scheme 1 Schedule Name
!- =========== ALL OBJECTS IN CLASS: AVAILABILITYMANAGER:NIGHTCYCLE ===========
AvailabilityManager:NightCycle,
PSZ-AC:1 Availability Manager, !- Name
Always_On, !- Applicability Schedule Name
HVACOperationSchd, !- Fan Schedule Name
CycleOnAny, !- Control Type
1.0, !- Thermostat Tolerance {deltaC}
FixedRunTime, !- Cycling Run Time Control Type
1800; !- Cycling Run Time {s}
AvailabilityManager:NightCycle,
PSZ-AC:2 Availability Manager, !- Name
Always_On, !- Applicability Schedule Name
HVACOperationSchd, !- Fan Schedule Name
CycleOnAny, !- Control Type
1.0, !- Thermostat Tolerance {deltaC}
FixedRunTime, !- Cycling Run Time Control Type
1800; !- Cycling Run Time {s}
AvailabilityManager:NightCycle,
PSZ-AC:3 Availability Manager, !- Name
Always_On, !- Applicability Schedule Name
HVACOperationSchd, !- Fan Schedule Name
CycleOnAny, !- Control Type
1.0, !- Thermostat Tolerance {deltaC}
FixedRunTime, !- Cycling Run Time Control Type
1800; !- Cycling Run Time {s}
AvailabilityManager:NightCycle,
PSZ-AC:4 Availability Manager, !- Name
Always_On, !- Applicability Schedule Name
HVACOperationSchd, !- Fan Schedule Name
CycleOnAny, !- Control Type
1.0, !- Thermostat Tolerance {deltaC}
FixedRunTime, !- Cycling Run Time Control Type
1800; !- Cycling Run Time {s}
AvailabilityManager:NightCycle,
PSZ-AC:5 Availability Manager, !- Name
Always_On, !- Applicability Schedule Name
HVACOperationSchd, !- Fan Schedule Name
CycleOnAny, !- Control Type
1.0, !- Thermostat Tolerance {deltaC}
FixedRunTime, !- Cycling Run Time Control Type
1800; !- Cycling Run Time {s}
!- =========== ALL OBJECTS IN CLASS: AVAILABILITYMANAGERASSIGNMENTLIST ===========
AvailabilityManagerAssignmentList,
PSZ-AC:1 Availability Manager List, !- Name
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
PSZ-AC:1 Availability Manager; !- Availability Manager 1 Name
AvailabilityManagerAssignmentList,
PSZ-AC:2 Availability Manager List, !- Name
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
PSZ-AC:2 Availability Manager; !- Availability Manager 1 Name
AvailabilityManagerAssignmentList,
PSZ-AC:3 Availability Manager List, !- Name
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
PSZ-AC:3 Availability Manager; !- Availability Manager 1 Name
AvailabilityManagerAssignmentList,
PSZ-AC:4 Availability Manager List, !- Name
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
PSZ-AC:4 Availability Manager; !- Availability Manager 1 Name
AvailabilityManagerAssignmentList,
PSZ-AC:5 Availability Manager List, !- Name
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
PSZ-AC:5 Availability Manager; !- Availability Manager 1 Name
!- =========== ALL OBJECTS IN CLASS: SETPOINTMANAGER:SCHEDULED ===========
SetpointManager:Scheduled,
SHWSys1 Loop Setpoint Manager, !- Name
Temperature, !- Control Variable
SHWSys1-Loop-Temp-Schedule, !- Schedule Name
SHWSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name
!- =========== ALL OBJECTS IN CLASS: SETPOINTMANAGER:SINGLEZONE:HEATING & COOLING ===========
SetpointManager:SingleZone:Heating,
SupAirTemp MngrCore_ZN - Htg, !- Name
Temperature, !- Control Variable
12.8, !- Minimum Supply Air Temperature {C}
40.0, !- Maximum Supply Air Temperature {C}
Core_ZN, !- Control Zone Name
Core_ZN Air Node, !- Zone Node Name
Core_ZN Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC:1 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
SetpointManager:SingleZone:Heating,
SupAirTemp MngrPerimeter_ZN_1 - Htg, !- Name
Temperature, !- Control Variable
12.8, !- Minimum Supply Air Temperature {C}
40.0, !- Maximum Supply Air Temperature {C}
Perimeter_ZN_1, !- Control Zone Name
Perimeter_ZN_1 Air Node, !- Zone Node Name
Perimeter_ZN_1 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC:2 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
SetpointManager:SingleZone:Heating,
SupAirTemp MngrPerimeter_ZN_2 - Htg, !- Name
Temperature, !- Control Variable
12.8, !- Minimum Supply Air Temperature {C}
40.0, !- Maximum Supply Air Temperature {C}
Perimeter_ZN_2, !- Control Zone Name
Perimeter_ZN_2 Air Node, !- Zone Node Name
Perimeter_ZN_2 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC:3 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
SetpointManager:SingleZone:Heating,
SupAirTemp MngrPerimeter_ZN_3 - Htg, !- Name
Temperature, !- Control Variable
12.8, !- Minimum Supply Air Temperature {C}
40.0, !- Maximum Supply Air Temperature {C}
Perimeter_ZN_3, !- Control Zone Name
Perimeter_ZN_3 Air Node, !- Zone Node Name
Perimeter_ZN_3 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC:4 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
SetpointManager:SingleZone:Heating,
SupAirTemp MngrPerimeter_ZN_4 - Htg, !- Name
Temperature, !- Control Variable
12.8, !- Minimum Supply Air Temperature {C}
40.0, !- Maximum Supply Air Temperature {C}
Perimeter_ZN_4, !- Control Zone Name
Perimeter_ZN_4 Air Node, !- Zone Node Name
Perimeter_ZN_4 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC:5 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
SetpointManager:SingleZone:Cooling,
SupAirTemp MngrCore_ZN - Clg, !- Name
Temperature, !- Control Variable
12.8, !- Minimum Supply Air Temperature {C}
40.0, !- Maximum Supply Air Temperature {C}
Core_ZN, !- Control Zone Name
Core_ZN Air Node, !- Zone Node Name
Core_ZN Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC:1_CoolC-PSZ-AC:1_HeatCNode; !- Setpoint Node or NodeList Name
SetpointManager:SingleZone:Cooling,
SupAirTemp MngrPerimeter_ZN_1 - Clg, !- Name
Temperature, !- Control Variable
12.8, !- Minimum Supply Air Temperature {C}
40.0, !- Maximum Supply Air Temperature {C}
Perimeter_ZN_1, !- Control Zone Name
Perimeter_ZN_1 Air Node, !- Zone Node Name
Perimeter_ZN_1 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC:2_CoolC-PSZ-AC:2_HeatCNode; !- Setpoint Node or NodeList Name
SetpointManager:SingleZone:Cooling,
SupAirTemp MngrPerimeter_ZN_2 - Clg, !- Name
Temperature, !- Control Variable
12.8, !- Minimum Supply Air Temperature {C}
40.0, !- Maximum Supply Air Temperature {C}
Perimeter_ZN_2, !- Control Zone Name
Perimeter_ZN_2 Air Node, !- Zone Node Name
Perimeter_ZN_2 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC:3_CoolC-PSZ-AC:3_HeatCNode; !- Setpoint Node or NodeList Name
SetpointManager:SingleZone:Cooling,
SupAirTemp MngrPerimeter_ZN_3 - Clg, !- Name
Temperature, !- Control Variable
12.8, !- Minimum Supply Air Temperature {C}
40.0, !- Maximum Supply Air Temperature {C}
Perimeter_ZN_3, !- Control Zone Name
Perimeter_ZN_3 Air Node, !- Zone Node Name
Perimeter_ZN_3 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC:4_CoolC-PSZ-AC:4_HeatCNode; !- Setpoint Node or NodeList Name
SetpointManager:SingleZone:Cooling,
SupAirTemp MngrPerimeter_ZN_4 - Clg, !- Name
Temperature, !- Control Variable
12.8, !- Minimum Supply Air Temperature {C}
40.0, !- Maximum Supply Air Temperature {C}
Perimeter_ZN_4, !- Control Zone Name
Perimeter_ZN_4 Air Node, !- Zone Node Name
Perimeter_ZN_4 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC:5_CoolC-PSZ-AC:5_HeatCNode; !- Setpoint Node or NodeList Name
!- =========== ALL OBJECTS IN CLASS: SETPOINTMANAGER:MIXEDAIR ===========
SetpointManager:MixedAir,
PSZ-AC:1_OAMixed Air Temp Manager, !- Name
Temperature, !- Control Variable
PSZ-AC:1_CoolC-PSZ-AC:1_HeatCNode, !- Reference Setpoint Node Name
PSZ-AC:1_OA-PSZ-AC:1_FanNode, !- Fan Inlet Node Name
PSZ-AC:1_Fan-PSZ-AC:1_CoolCNode, !- Fan Outlet Node Name
PSZ-AC:1_OA-PSZ-AC:1_FanNode; !- Setpoint Node or NodeList Name
SetpointManager:MixedAir,
PSZ-AC:2_OAMixed Air Temp Manager, !- Name
Temperature, !- Control Variable
PSZ-AC:2_CoolC-PSZ-AC:2_HeatCNode, !- Reference Setpoint Node Name
PSZ-AC:2_OA-PSZ-AC:2_FanNode, !- Fan Inlet Node Name
PSZ-AC:2_Fan-PSZ-AC:2_CoolCNode, !- Fan Outlet Node Name
PSZ-AC:2_OA-PSZ-AC:2_FanNode; !- Setpoint Node or NodeList Name
SetpointManager:MixedAir,
PSZ-AC:3_OAMixed Air Temp Manager, !- Name
Temperature, !- Control Variable
PSZ-AC:3_CoolC-PSZ-AC:3_HeatCNode, !- Reference Setpoint Node Name
PSZ-AC:3_OA-PSZ-AC:3_FanNode, !- Fan Inlet Node Name
PSZ-AC:3_Fan-PSZ-AC:3_CoolCNode, !- Fan Outlet Node Name
PSZ-AC:3_OA-PSZ-AC:3_FanNode; !- Setpoint Node or NodeList Name
SetpointManager:MixedAir,
PSZ-AC:4_OAMixed Air Temp Manager, !- Name
Temperature, !- Control Variable
PSZ-AC:4_CoolC-PSZ-AC:4_HeatCNode, !- Reference Setpoint Node Name
PSZ-AC:4_OA-PSZ-AC:4_FanNode, !- Fan Inlet Node Name
PSZ-AC:4_Fan-PSZ-AC:4_CoolCNode, !- Fan Outlet Node Name
PSZ-AC:4_OA-PSZ-AC:4_FanNode; !- Setpoint Node or NodeList Name
SetpointManager:MixedAir,
PSZ-AC:5_OAMixed Air Temp Manager, !- Name
Temperature, !- Control Variable
PSZ-AC:5_CoolC-PSZ-AC:5_HeatCNode, !- Reference Setpoint Node Name
PSZ-AC:5_OA-PSZ-AC:5_FanNode, !- Fan Inlet Node Name
PSZ-AC:5_Fan-PSZ-AC:5_CoolCNode, !- Fan Outlet Node Name
PSZ-AC:5_OA-PSZ-AC:5_FanNode; !- Setpoint Node or NodeList Name
!- =========== ALL OBJECTS IN CLASS: WATERUSE:EQUIPMENT ===========
WaterUse:Equipment,
Core_ZN Water Equipment, !- Name
WaterUse, !- End-Use Subcategory
4.048E-06, !- Peak Flow Rate {m3/s}
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
Core_ZN Water Equipment Temp Sched, !- Target Temperature Schedule Name
Core_ZN Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
, !- Cold Water Supply Temperature Schedule Name
Core_ZN, !- Zone Name
Core_ZN Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
Core_ZN Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
!- =========== ALL OBJECTS IN CLASS: WATERUSE:CONNECTIONS ===========
WaterUse:Connections,
Core_ZN Water Equipment, !- Name
Core_ZN Water Equipment Water Inlet Node, !- Inlet Node Name
Core_ZN Water Equipment Water Outlet Node, !- Outlet Node Name
, !- Supply Water Storage Tank Name
, !- Reclamation Water Storage Tank Name
, !- Hot Water Supply Temperature Schedule Name
, !- Cold Water Supply Temperature Schedule Name
, !- Drain Water Heat Exchanger Type
, !- Drain Water Heat Exchanger Destination
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
Core_ZN Water Equipment; !- Water Use Equipment 1 Name
!No PV for this case
!- =========== ALL OBJECTS IN CLASS: CURVE:QUADRATIC ===========
Curve:Quadratic,
PSZ-AC:1_CoolCLennoxStandard10Ton_TGA120S2B_CapFF, !- Name
0.77136, !- Coefficient1 Constant
0.34053, !- Coefficient2 x
-0.11088, !- Coefficient3 x**2
0.75918, !- Minimum Value of x
1.13877; !- Maximum Value of x
Curve:Quadratic,
PSZ-AC:1_CoolCLennoxStandard10Ton_TGA120S2B_EIRFFF, !- Name
1.20550, !- Coefficient1 Constant
-0.32953, !- Coefficient2 x
0.12308, !- Coefficient3 x**2
0.75918, !- Minimum Value of x
1.13877; !- Maximum Value of x
Curve:Quadratic,
PSZ-AC:1_CoolCLennoxStandard10Ton_TGA120S2B_PLR, !- Name
0.77100, !- Coefficient1 Constant
0.22900, !- Coefficient2 x
0.0, !- Coefficient3 x**2
0.0, !- Minimum Value of x
1.0; !- Maximum Value of x
Curve:Quadratic,
PSZ-AC:2_CoolCLennoxStandard10Ton_TGA120S2B_CapFF, !- Name
0.77136, !- Coefficient1 Constant
0.34053, !- Coefficient2 x
-0.11088, !- Coefficient3 x**2
0.75918, !- Minimum Value of x
1.13877; !- Maximum Value of x
Curve:Quadratic,
PSZ-AC:2_CoolCLennoxStandard10Ton_TGA120S2B_EIRFFF, !- Name
1.20550, !- Coefficient1 Constant
-0.32953, !- Coefficient2 x
0.12308, !- Coefficient3 x**2
0.75918, !- Minimum Value of x
1.13877; !- Maximum Value of x
Curve:Quadratic,
PSZ-AC:2_CoolCLennoxStandard10Ton_TGA120S2B_PLR, !- Name
0.77100, !- Coefficient1 Constant
0.22900, !- Coefficient2 x
0.0, !- Coefficient3 x**2
0.0, !- Minimum Value of x
1.0; !- Maximum Value of x
Curve:Quadratic,
PSZ-AC:3_CoolCLennoxStandard10Ton_TGA120S2B_CapFF, !- Name
0.77136, !- Coefficient1 Constant
0.34053, !- Coefficient2 x
-0.11088, !- Coefficient3 x**2
0.75918, !- Minimum Value of x
1.13877; !- Maximum Value of x
Curve:Quadratic,
PSZ-AC:3_CoolCLennoxStandard10Ton_TGA120S2B_EIRFFF, !- Name
1.20550, !- Coefficient1 Constant
-0.32953, !- Coefficient2 x
0.12308, !- Coefficient3 x**2
0.75918, !- Minimum Value of x
1.13877; !- Maximum Value of x
Curve:Quadratic,
PSZ-AC:3_CoolCLennoxStandard10Ton_TGA120S2B_PLR, !- Name
0.77100, !- Coefficient1 Constant
0.22900, !- Coefficient2 x
0.0, !- Coefficient3 x**2
0.0, !- Minimum Value of x
1.0; !- Maximum Value of x
Curve:Quadratic,
PSZ-AC:4_CoolCLennoxStandard10Ton_TGA120S2B_CapFF, !- Name
0.77136, !- Coefficient1 Constant
0.34053, !- Coefficient2 x
-0.11088, !- Coefficient3 x**2
0.75918, !- Minimum Value of x
1.13877; !- Maximum Value of x
Curve:Quadratic,
PSZ-AC:4_CoolCLennoxStandard10Ton_TGA120S2B_EIRFFF, !- Name
1.20550, !- Coefficient1 Constant
-0.32953, !- Coefficient2 x
0.12308, !- Coefficient3 x**2
0.75918, !- Minimum Value of x
1.13877; !- Maximum Value of x
Curve:Quadratic,
PSZ-AC:4_CoolCLennoxStandard10Ton_TGA120S2B_PLR, !- Name
0.77100, !- Coefficient1 Constant
0.22900, !- Coefficient2 x
0.0, !- Coefficient3 x**2
0.0, !- Minimum Value of x
1.0; !- Maximum Value of x
Curve:Quadratic,
PSZ-AC:5_CoolCLennoxStandard10Ton_TGA120S2B_CapFF, !- Name
0.77136, !- Coefficient1 Constant
0.34053, !- Coefficient2 x
-0.11088, !- Coefficient3 x**2
0.75918, !- Minimum Value of x
1.13877; !- Maximum Value of x
Curve:Quadratic,
PSZ-AC:5_CoolCLennoxStandard10Ton_TGA120S2B_EIRFFF, !- Name
1.20550, !- Coefficient1 Constant
-0.32953, !- Coefficient2 x
0.12308, !- Coefficient3 x**2
0.75918, !- Minimum Value of x
1.13877; !- Maximum Value of x
Curve:Quadratic,
PSZ-AC:5_CoolCLennoxStandard10Ton_TGA120S2B_PLR, !- Name
0.77100, !- Coefficient1 Constant
0.22900, !- Coefficient2 x
0.0, !- Coefficient3 x**2
0.0, !- Minimum Value of x
1.0; !- Maximum Value of x
!- =========== ALL OBJECTS IN CLASS: CURVE:BIQUADRATIC ===========
Curve:Biquadratic,
PSZ-AC:1_CoolCLennoxStandard10Ton_TGA120S2B_CapFT, !- Name
0.42415, !- Coefficient1 Constant
0.04426, !- Coefficient2 x
-0.00042, !- Coefficient3 x**2
0.00333, !- Coefficient4 y
-0.00008, !- Coefficient5 y**2
-0.00021, !- Coefficient6 x*y
17.00000, !- Minimum Value of x
22.00000, !- Maximum Value of x
29.00000, !- Minimum Value of y
46.00000; !- Maximum Value of y
Curve:Biquadratic,
PSZ-AC:1_CoolCLennoxStandard10Ton_TGA120S2B_EIRFT, !- Name
1.23649, !- Coefficient1 Constant
-0.02431, !- Coefficient2 x
0.00057, !- Coefficient3 x**2
-0.01434, !- Coefficient4 y
0.00063, !- Coefficient5 y**2
-0.00038, !- Coefficient6 x*y
17.00000, !- Minimum Value of x
22.00000, !- Maximum Value of x
29.00000, !- Minimum Value of y
46.00000; !- Maximum Value of y
Curve:Biquadratic,
PSZ-AC:2_CoolCLennoxStandard10Ton_TGA120S2B_CapFT, !- Name
0.42415, !- Coefficient1 Constant
0.04426, !- Coefficient2 x
-0.00042, !- Coefficient3 x**2
0.00333, !- Coefficient4 y
-0.00008, !- Coefficient5 y**2
-0.00021, !- Coefficient6 x*y
17.00000, !- Minimum Value of x
22.00000, !- Maximum Value of x
29.00000, !- Minimum Value of y
46.00000; !- Maximum Value of y
Curve:Biquadratic,
PSZ-AC:2_CoolCLennoxStandard10Ton_TGA120S2B_EIRFT, !- Name
1.23649, !- Coefficient1 Constant
-0.02431, !- Coefficient2 x
0.00057, !- Coefficient3 x**2
-0.01434, !- Coefficient4 y
0.00063, !- Coefficient5 y**2
-0.00038, !- Coefficient6 x*y
17.00000, !- Minimum Value of x
22.00000, !- Maximum Value of x
29.00000, !- Minimum Value of y
46.00000; !- Maximum Value of y
Curve:Biquadratic,
PSZ-AC:3_CoolCLennoxStandard10Ton_TGA120S2B_CapFT, !- Name
0.42415, !- Coefficient1 Constant
0.04426, !- Coefficient2 x
-0.00042, !- Coefficient3 x**2
0.00333, !- Coefficient4 y
-0.00008, !- Coefficient5 y**2
-0.00021, !- Coefficient6 x*y
17.00000, !- Minimum Value of x
22.00000, !- Maximum Value of x
29.00000, !- Minimum Value of y
46.00000; !- Maximum Value of y
Curve:Biquadratic,
PSZ-AC:3_CoolCLennoxStandard10Ton_TGA120S2B_EIRFT, !- Name
1.23649, !- Coefficient1 Constant
-0.02431, !- Coefficient2 x
0.00057, !- Coefficient3 x**2
-0.01434, !- Coefficient4 y
0.00063, !- Coefficient5 y**2
-0.00038, !- Coefficient6 x*y
17.00000, !- Minimum Value of x
22.00000, !- Maximum Value of x
29.00000, !- Minimum Value of y
46.00000; !- Maximum Value of y
Curve:Biquadratic,
PSZ-AC:4_CoolCLennoxStandard10Ton_TGA120S2B_CapFT, !- Name
0.42415, !- Coefficient1 Constant
0.04426, !- Coefficient2 x
-0.00042, !- Coefficient3 x**2
0.00333, !- Coefficient4 y
-0.00008, !- Coefficient5 y**2
-0.00021, !- Coefficient6 x*y
17.00000, !- Minimum Value of x
22.00000, !- Maximum Value of x
29.00000, !- Minimum Value of y
46.00000; !- Maximum Value of y
Curve:Biquadratic,
PSZ-AC:4_CoolCLennoxStandard10Ton_TGA120S2B_EIRFT, !- Name
1.23649, !- Coefficient1 Constant
-0.02431, !- Coefficient2 x
0.00057, !- Coefficient3 x**2
-0.01434, !- Coefficient4 y
0.00063, !- Coefficient5 y**2
-0.00038, !- Coefficient6 x*y
17.00000, !- Minimum Value of x
22.00000, !- Maximum Value of x
29.00000, !- Minimum Value of y
46.00000; !- Maximum Value of y
Curve:Biquadratic,
PSZ-AC:5_CoolCLennoxStandard10Ton_TGA120S2B_CapFT, !- Name
0.42415, !- Coefficient1 Constant
0.04426, !- Coefficient2 x
-0.00042, !- Coefficient3 x**2
0.00333, !- Coefficient4 y
-0.00008, !- Coefficient5 y**2
-0.00021, !- Coefficient6 x*y
17.00000, !- Minimum Value of x
22.00000, !- Maximum Value of x
29.00000, !- Minimum Value of y
46.00000; !- Maximum Value of y
Curve:Biquadratic,
PSZ-AC:5_CoolCLennoxStandard10Ton_TGA120S2B_EIRFT, !- Name
1.23649, !- Coefficient1 Constant
-0.02431, !- Coefficient2 x
0.00057, !- Coefficient3 x**2
-0.01434, !- Coefficient4 y
0.00063, !- Coefficient5 y**2
-0.00038, !- Coefficient6 x*y
17.00000, !- Minimum Value of x
22.00000, !- Maximum Value of x
29.00000, !- Minimum Value of y
46.00000; !- Maximum Value of y
!- =========== ALL OBJECTS IN CLASS: CURVE:QUADRATIC ===========
Curve:Quadratic,
HPACCoolCapFFF, !- Name
0.8, !- Coefficient1 Constant
0.2, !- Coefficient2 x
0.0, !- Coefficient3 x**2
0.5, !- Minimum Value of x
1.5; !- Maximum Value of x
Curve:Quadratic,
HPACCOOLEIRFFF, !- Name
1.156, !- Coefficient1 Constant
-0.1816, !- Coefficient2 x
0.0256, !- Coefficient3 x**2
0.5, !- Minimum Value of x
1.5; !- Maximum Value of x
Curve:Quadratic,
HPACCOOLPLFFPLR, !- Name
0.85, !- Coefficient1 Constant
0.15, !- Coefficient2 x
0.0, !- Coefficient3 x**2
0.0, !- Minimum Value of x
1.0; !- Maximum Value of x
Curve:Quadratic,
HPACHeatEIRFFF, !- Name
1.3824, !- Coefficient1 Constant
-0.4336, !- Coefficient2 x
0.0512, !- Coefficient3 x**2
0.0, !- Minimum Value of x
1.0; !- Maximum Value of x
!- =========== ALL OBJECTS IN CLASS: CURVE:CUBIC ===========
Curve:Cubic,
HPACHeatCapFT, !- Name
0.758746, !- Coefficient1 Constant
0.027626, !- Coefficient2 x
0.000148716, !- Coefficient3 x**2
0.0000034992, !- Coefficient4 x**3
-20.0, !- Minimum Value of x
20.0; !- Maximum Value of x
Curve:Cubic,
HPACHeatCapFFF, !- Name
0.84, !- Coefficient1 Constant
0.16, !- Coefficient2 x
0.0, !- Coefficient3 x**2
0.0, !- Coefficient4 x**3
0.5, !- Minimum Value of x
1.5; !- Maximum Value of x
Curve:Cubic,
HPACHeatEIRFT, !- Name
1.19248, !- Coefficient1 Constant
-0.0300438, !- Coefficient2 x
0.00103745, !- Coefficient3 x**2
-0.000023328, !- Coefficient4 x**3
-20.0, !- Minimum Value of x
20.0; !- Maximum Value of x
!- =========== ALL OBJECTS IN CLASS: CURVE:BIQUADRATIC ===========
Curve:Biquadratic,
HPACCoolCapFT, !- Name
0.766956, !- Coefficient1 Constant
0.0107756, !- Coefficient2 x
-0.0000414703, !- Coefficient3 x**2
0.00134961, !- Coefficient4 y
-0.000261144, !- Coefficient5 y**2
0.000457488, !- Coefficient6 x*y
12.77778, !- Minimum Value of x
23.88889, !- Maximum Value of x
21.11111, !- Minimum Value of y
46.11111; !- Maximum Value of y
Curve:Biquadratic,
HPACCOOLEIRFT, !- Name
0.297145, !- Coefficient1 Constant
0.0430933, !- Coefficient2 x
-0.000748766, !- Coefficient3 x**2
0.00597727, !- Coefficient4 y
0.000482112, !- Coefficient5 y**2
-0.000956448, !- Coefficient6 x*y
12.77778, !- Minimum Value of x
23.88889, !- Maximum Value of x
21.11111, !- Minimum Value of y
46.11111; !- Maximum Value of y
!- =========== ALL OBJECTS IN CLASS: REPORT METERFILEONLY ===========
Output:Meter:MeterFileOnly,Electricity:Facility,Hourly;
Output:Meter:MeterFileOnly,ElectricityNet:Facility,Hourly;
Output:Meter:MeterFileOnly,Gas:Facility,Hourly;
!- =========== ALL OBJECTS IN CLASS: OUTPUTCONTROL:TABLE:STYLE ===========
OutputControl:Table:Style,
CommaAndHTML; !- Column Separator
!- =========== ALL OBJECTS IN CLASS: OUTPUTCONTROL:REPORTINGTOLERANCES ===========
OutputControl:ReportingTolerances,
0.556, !- Tolerance for Time Heating Setpoint Not Met {deltaC}
0.556; !- Tolerance for Time Cooling Setpoint Not Met {deltaC}
!- =========== ALL OBJECTS IN CLASS: OUTPUT:VARIABLE ===========
! Output:Variable,*,Site Outdoor Air Drybulb Temperature,Hourly;
! Output:Variable,*,Site Outdoor Air Wetbulb Temperature,Hourly;
! Output:Variable,HVACOperationSchd,Schedule Value,Hourly;
!
! ! Outdoor Air Flow
!
! Output:Variable,PSZ-AC:1_OAInlet Node,System Node VolFlowRate,Hourly;
! Output:Variable,PSZ-AC:2_OAInlet Node,System Node VolFlowRate,Hourly;
! Output:Variable,PSZ-AC:3_OAInlet Node,System Node VolFlowRate,Hourly;
! Output:Variable,PSZ-AC:4_OAInlet Node,System Node VolFlowRate,Hourly;
! Output:Variable,PSZ-AC:5_OAInlet Node,System Node VolFlowRate,Hourly;
!
! ! Return Air Flow
!
! Output:Variable,PSZ-AC:1 Supply Equipment Inlet Node,System Node VolFlowRate,Hourly;
! Output:Variable,PSZ-AC:2 Supply Equipment Inlet Node,System Node VolFlowRate,Hourly;
! Output:Variable,PSZ-AC:3 Supply Equipment Inlet Node,System Node VolFlowRate,Hourly;
! Output:Variable,PSZ-AC:4 Supply Equipment Inlet Node,System Node VolFlowRate,Hourly;
! Output:Variable,PSZ-AC:5 Supply Equipment Inlet Node,System Node VolFlowRate,Hourly;
!
! ! Return Air Tdb
!
! Output:Variable,PSZ-AC:1 Supply Equipment Inlet Node,System Node Temperature,Hourly;
! Output:Variable,PSZ-AC:2 Supply Equipment Inlet Node,System Node Temperature,Hourly;
! Output:Variable,PSZ-AC:3 Supply Equipment Inlet Node,System Node Temperature,Hourly;
! Output:Variable,PSZ-AC:4 Supply Equipment Inlet Node,System Node Temperature,Hourly;
! Output:Variable,PSZ-AC:5 Supply Equipment Inlet Node,System Node Temperature,Hourly;
!
! ! Return Air Twb
!
! Output:Variable,PSZ-AC:1 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly;
! Output:Variable,PSZ-AC:2 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly;
! Output:Variable,PSZ-AC:3 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly;
! Output:Variable,PSZ-AC:4 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly;
! Output:Variable,PSZ-AC:5 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly;
!
! ! supply Air Flow
!
! Output:Variable,PSZ-AC:1 Supply Equipment Outlet Node,System Node VolFlowRate,Hourly;
! Output:Variable,PSZ-AC:2 Supply Equipment Outlet Node,System Node VolFlowRate,Hourly;
! Output:Variable,PSZ-AC:3 Supply Equipment Outlet Node,System Node VolFlowRate,Hourly;
! Output:Variable,PSZ-AC:4 Supply Equipment Outlet Node,System Node VolFlowRate,Hourly;
! Output:Variable,PSZ-AC:5 Supply Equipment Outlet Node,System Node VolFlowRate,Hourly;
!
! ! supply Air Tdb
!
! Output:Variable,PSZ-AC:1 Supply Equipment Outlet Node,System Node Temperature,Hourly;
! Output:Variable,PSZ-AC:2 Supply Equipment Outlet Node,System Node Temperature,Hourly;
! Output:Variable,PSZ-AC:3 Supply Equipment Outlet Node,System Node Temperature,Hourly;
! Output:Variable,PSZ-AC:4 Supply Equipment Outlet Node,System Node Temperature,Hourly;
! Output:Variable,PSZ-AC:5 Supply Equipment Outlet Node,System Node Temperature,Hourly;
!
! ! supply Air Twb
!
! Output:Variable,PSZ-AC:1 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly;
! Output:Variable,PSZ-AC:2 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly;
! Output:Variable,PSZ-AC:3 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly;
! Output:Variable,PSZ-AC:4 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly;
! Output:Variable,PSZ-AC:5 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly;
!
! ! Coil Load
!
! Output:Variable,*,Air System Cooling Coil Total Cooling Energy,Hourly;
! Output:Variable,*,Air System Heating Coil Total Heating Energy,Hourly;
!
! ! SHW
!
! Output:Variable,*,Water Heater Heating Rate,Hourly;
!
! ! Fan and Pump
!
! Output:Variable,*,Fan Electric Power,hourly; !- HVAC Average W
! Output:Variable,*,Pump Electric Power,hourly; !- HVAC Average W
! Output:Variable,*,Humidifier Electric Power,hourly; !- HVAC Average W
!
! ! Utility and Submeter
!
! Output:Meter,Electricity:Facility,Hourly;
! Output:Meter,Gas:Facility,Hourly;
! Output:Meter,InteriorLights:Electricity,Hourly;
! Output:Meter,ExteriorLights:Electricity,Hourly;
! Output:Meter,InteriorEquipment:Electricity,Hourly;
! Output:Meter,ExteriorEquipment:Electricity,Hourly;
! Output:Meter,Fans:Electricity,Hourly;
! Output:Meter,Pumps:Electricity,Hourly;
! Output:Meter,Heating:Electricity,Hourly;
! Output:Meter,Cooling:Electricity,Hourly;
! Output:Meter,HeatRejection:Electricity,Hourly;
! Output:Meter,Humidifier:Electricity,Hourly;
! Output:Meter,HeatRecovery:Electricity,Hourly;
! Output:Meter,DHW:Electricity,Hourly;
! Output:Meter,Cogeneration:Electricity,Hourly;
! Output:Meter,Refrigeration:Electricity,Hourly;
! Output:Meter,WaterSystems:Electricity,Hourly;
!
! Output:Meter,InteriorLights:Gas,Hourly;
! Output:Meter,ExteriorLights:Gas,Hourly;
! Output:Meter,InteriorEquipment:Gas,Hourly;
! Output:Meter,ExteriorEquipment:Gas,Hourly;
! Output:Meter,Fans:Gas,Hourly;
! Output:Meter,Pumps:Gas,Hourly;
! Output:Meter,Heating:Gas,Hourly;
! Output:Meter,Cooling:Gas,Hourly;
! Output:Meter,HeatRejection:Gas,Hourly;
! Output:Meter,Humidifier:Gas,Hourly;
! Output:Meter,HeatRecovery:Gas,Hourly;
! Output:Meter,DHW:Gas,Hourly;
! Output:Meter,Cogeneration:Gas,Hourly;
! Output:Meter,Refrigeration:Gas,Hourly;
! Output:Meter,WaterSystems:Gas,Hourly;
!- =========== ALL OBJECTS IN CLASS: OUTPUT:TABLE:SUMMARYREPORTS ===========
Output:Table:SummaryReports,
AllSummaryAndMonthly; !- Report 1 Name
!- =========== ALL OBJECTS IN CLASS: REPORT:TABLE:MONTHLY ===========
Output:Table:Monthly,
NameHolderMonthlySummary TaskPurpose ProgressIndicator, !- Name ProgressIndicator,ForDetermination2019, ...
3, !- Digits After Decimal
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
SumOrAverage, !- Aggregation Type for Variable or Meter 1
Heating:Gas, !- Variable or Meter 2 Name
SumOrAverage; !- Aggregation Type for Variable or Meter 2
Output:Table:Monthly,
NameHolderMonthlySummary CodeName ASHRAE901, !- Name ASHRAE901, ASHRAE1891, IECC, Title24, ORSC, IGCC, ...
3, !- Digits After Decimal
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
SumOrAverage, !- Aggregation Type for Variable or Meter 1
Heating:Gas, !- Variable or Meter 2 Name
SumOrAverage; !- Aggregation Type for Variable or Meter 2
Output:Table:Monthly,
NameHolderMonthlySummary CodeYear 2019, !- Name all years for ASHRAE90.1, IECC, ASHRAE189.1
3, !- Digits After Decimal
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
SumOrAverage, !- Aggregation Type for Variable or Meter 1
Heating:Gas, !- Variable or Meter 2 Name
SumOrAverage; !- Aggregation Type for Variable or Meter 2
Output:Table:Monthly,
NameHolderMonthlySummary CodeAmendment NoneAmend, !- Name StateAmend,EEM, NoneAmend for national or state without amendment
3, !- Digits After Decimal
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
SumOrAverage, !- Aggregation Type for Variable or Meter 1
Heating:Gas, !- Variable or Meter 2 Name
SumOrAverage; !- Aggregation Type for Variable or Meter 2
Output:Table:Monthly,
NameHolderMonthlySummary PrototypeName OfficeSmall, !- Name 16 Prototypes
3, !- Digits After Decimal
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
SumOrAverage, !- Aggregation Type for Variable or Meter 1
Heating:Gas, !- Variable or Meter 2 Name
SumOrAverage; !- Aggregation Type for Variable or Meter 2
Output:Table:Monthly,
NameHolderMonthlySummary TaskScope National, !- Name National, State, City
3, !- Digits After Decimal
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
SumOrAverage, !- Aggregation Type for Variable or Meter 1
Heating:Gas, !- Variable or Meter 2 Name
SumOrAverage; !- Aggregation Type for Variable or Meter 2
Output:Table:Monthly,
NameHolderMonthlySummary State National, !- Name National for national analysis, NewYork, Utah,... for state analysis, or city name for city analysis. Spell out the name of the state without space between words
3, !- Digits After Decimal
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
SumOrAverage, !- Aggregation Type for Variable or Meter 1
Heating:Gas, !- Variable or Meter 2 Name
SumOrAverage; !- Aggregation Type for Variable or Meter 2
Output:Table:Monthly,
NameHolderMonthlySummary ClimateZone 5A, !- Name 0-8
3, !- Digits After Decimal
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
SumOrAverage, !- Aggregation Type for Variable or Meter 1
Heating:Gas, !- Variable or Meter 2 Name
SumOrAverage; !- Aggregation Type for Variable or Meter 2
Output:Table:Monthly,
NameHolderMonthlySummary RepresentCity USA_NY_Buffalo, !- Name representative city like Honolulu for national, for each state, for city analysis. this is not the city of the weather file. The weather city will be extracted from epw file
3, !- Digits After Decimal
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
SumOrAverage, !- Aggregation Type for Variable or Meter 1
Heating:Gas, !- Variable or Meter 2 Name
SumOrAverage; !- Aggregation Type for Variable or Meter 2
EnergyManagementSystem:Sensor,
ActualOccupancy, !- Name
Binary Occupancy, !- Output:Variable or Output:Meter Index Key Name
Schedule Value; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:Sensor,
Core_ZN_LSr, !- Name
Core_ZN, !- Output:Variable or Output:Meter Index Key Name
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:Sensor,
Core_ZN_Occ_Sensor, !- Name
Core_ZN, !- Output:Variable or Output:Meter Index Key Name
People Occupant Count; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:InternalVariable,
Core_ZN_Area, !- Name
Core_ZN, !- Internal Data Index Key Name
Zone Floor Area; !- Internal Data Type
EnergyManagementSystem:Actuator,
Core_ZN_Light_Actuator, !- Name
Core_ZN_lights, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Program,
SET_Core_ZN_Light_EMS_Program, !- Name
SET Core_ZN_LSr_IP=0.093*Core_ZN_LSr/Core_ZN_Area, ! Calculate the actual LPD for each hour
IF (Core_ZN_Occ_Sensor <= 0) && (Core_ZN_LSr_IP >= 0.02),
SET Core_ZN_Light_Actuator = 0.02*Core_ZN_Area/0.09290304,
ELSE,
SET Core_ZN_Light_Actuator = NULL,
ENDIF;
EnergyManagementSystem:ProgramCallingManager,
SET_Core_ZN_Light_EMS_Program_Prog_Manager, !- Name
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
SET_Core_ZN_Light_EMS_Program; !- Program Name 1
EnergyManagementSystem:Sensor,
Perimeter_ZN_1_LSr, !- Name
Perimeter_ZN_1, !- Output:Variable or Output:Meter Index Key Name
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:Sensor,
Perimeter_ZN_1_Occ_Sensor, !- Name
Perimeter_ZN_1, !- Output:Variable or Output:Meter Index Key Name
People Occupant Count; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:InternalVariable,
Perimeter_ZN_1_Area, !- Name
Perimeter_ZN_1, !- Internal Data Index Key Name
Zone Floor Area; !- Internal Data Type
EnergyManagementSystem:Actuator,
Perimeter_ZN_1_Light_Actuator, !- Name
Perimeter_ZN_1_lights, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Program,
SET_Perimeter_ZN_1_Light_EMS_Program, !- Name
SET Perimeter_ZN_1_LSr_IP=0.093*Perimeter_ZN_1_LSr/Perimeter_ZN_1_Area, ! Calculate the actual LPD for each hour
IF (Perimeter_ZN_1_Occ_Sensor <= 0) && (Perimeter_ZN_1_LSr_IP >= 0.02),
SET Perimeter_ZN_1_Light_Actuator = 0.02*Perimeter_ZN_1_Area/0.09290304,
ELSE,
SET Perimeter_ZN_1_Light_Actuator = NULL,
ENDIF;
EnergyManagementSystem:ProgramCallingManager,
SET_Perimeter_ZN_1_Light_EMS_Program_Prog_Manager, !- Name
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
SET_Perimeter_ZN_1_Light_EMS_Program; !- Program Name 1
EnergyManagementSystem:Sensor,
Perimeter_ZN_2_LSr, !- Name
Perimeter_ZN_2, !- Output:Variable or Output:Meter Index Key Name
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:Sensor,
Perimeter_ZN_2_Occ_Sensor, !- Name
Perimeter_ZN_2, !- Output:Variable or Output:Meter Index Key Name
People Occupant Count; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:InternalVariable,
Perimeter_ZN_2_Area, !- Name
Perimeter_ZN_2, !- Internal Data Index Key Name
Zone Floor Area; !- Internal Data Type
EnergyManagementSystem:Actuator,
Perimeter_ZN_2_Light_Actuator, !- Name
Perimeter_ZN_2_lights, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Program,
SET_Perimeter_ZN_2_Light_EMS_Program, !- Name
SET Perimeter_ZN_2_LSr_IP=0.093*Perimeter_ZN_2_LSr/Perimeter_ZN_2_Area, ! Calculate the actual LPD for each hour
IF (Perimeter_ZN_2_Occ_Sensor <= 0) && (Perimeter_ZN_2_LSr_IP >= 0.02),
IF (ActualOccupancy <= 0), !- Check is to avoid conflict with Add. G
SET Perimeter_ZN_2_Light_Actuator = 0.02*Perimeter_ZN_2_Area/0.09290304,
ELSE,
SET Perimeter_ZN_2_Light_Actuator = NULL,
ENDIF,
ELSE,
SET Perimeter_ZN_2_Light_Actuator = NULL,
ENDIF;
EnergyManagementSystem:ProgramCallingManager,
SET_Perimeter_ZN_2_Light_EMS_Program_Prog_Manager, !- Name
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
SET_Perimeter_ZN_2_Light_EMS_Program; !- Program Name 1
EnergyManagementSystem:Sensor,
Perimeter_ZN_3_LSr, !- Name
Perimeter_ZN_3, !- Output:Variable or Output:Meter Index Key Name
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:Sensor,
Perimeter_ZN_3_Occ_Sensor, !- Name
Perimeter_ZN_3, !- Output:Variable or Output:Meter Index Key Name
People Occupant Count; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:InternalVariable,
Perimeter_ZN_3_Area, !- Name
Perimeter_ZN_3, !- Internal Data Index Key Name
Zone Floor Area; !- Internal Data Type
EnergyManagementSystem:Actuator,
Perimeter_ZN_3_Light_Actuator, !- Name
Perimeter_ZN_3_lights, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Program,
SET_Perimeter_ZN_3_Light_EMS_Program, !- Name
SET Perimeter_ZN_3_LSr_IP=0.093*Perimeter_ZN_3_LSr/Perimeter_ZN_3_Area, ! Calculate the actual LPD for each hour
IF (Perimeter_ZN_3_Occ_Sensor <= 0) && (Perimeter_ZN_3_LSr_IP >= 0.02),
SET Perimeter_ZN_3_Light_Actuator = 0.02*Perimeter_ZN_3_Area/0.09290304,
ELSE,
SET Perimeter_ZN_3_Light_Actuator = NULL,
ENDIF;
EnergyManagementSystem:ProgramCallingManager,
SET_Perimeter_ZN_3_Light_EMS_Program_Prog_Manager, !- Name
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
SET_Perimeter_ZN_3_Light_EMS_Program; !- Program Name 1
EnergyManagementSystem:Sensor,
Perimeter_ZN_4_LSr, !- Name
Perimeter_ZN_4, !- Output:Variable or Output:Meter Index Key Name
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:Sensor,
Perimeter_ZN_4_Occ_Sensor, !- Name
Perimeter_ZN_4, !- Output:Variable or Output:Meter Index Key Name
People Occupant Count; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:InternalVariable,
Perimeter_ZN_4_Area, !- Name
Perimeter_ZN_4, !- Internal Data Index Key Name
Zone Floor Area; !- Internal Data Type
EnergyManagementSystem:Actuator,
Perimeter_ZN_4_Light_Actuator, !- Name
Perimeter_ZN_4_lights, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Program,
SET_Perimeter_ZN_4_Light_EMS_Program, !- Name
SET Perimeter_ZN_4_LSr_IP=0.093*Perimeter_ZN_4_LSr/Perimeter_ZN_4_Area, ! Calculate the actual LPD for each hour
IF (Perimeter_ZN_4_Occ_Sensor <= 0) && (Perimeter_ZN_4_LSr_IP >= 0.02),
SET Perimeter_ZN_4_Light_Actuator = 0.02*Perimeter_ZN_4_Area/0.09290304,
ELSE,
SET Perimeter_ZN_4_Light_Actuator = NULL,
ENDIF;
EnergyManagementSystem:ProgramCallingManager,
SET_Perimeter_ZN_4_Light_EMS_Program_Prog_Manager, !- Name
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
SET_Perimeter_ZN_4_Light_EMS_Program; !- Program Name 1
Reference in New Issue Copy Permalink