From c2e5cd5970510fae996f7e658ccee2778bbd5746 Mon Sep 17 00:00:00 2001 From: Soroush Samareh Abolhassani Date: Tue, 24 Aug 2021 15:18:40 -0400 Subject: [PATCH] idf sample from DOE --- .../ASHRAE901_OfficeSmall_STD2019_Buffalo.idf | 6384 +++++++++++++++++ 1 file changed, 6384 insertions(+) create mode 100644 data/schedules/ASHRAE901_OfficeSmall_STD2019_Buffalo.idf diff --git a/data/schedules/ASHRAE901_OfficeSmall_STD2019_Buffalo.idf b/data/schedules/ASHRAE901_OfficeSmall_STD2019_Buffalo.idf new file mode 100644 index 00000000..c28e80e3 --- /dev/null +++ b/data/schedules/ASHRAE901_OfficeSmall_STD2019_Buffalo.idf @@ -0,0 +1,6384 @@ + +!The DOE Prototype Building Models were developed by Pacific Northwest National Laboratory (PNNL), under contract with the U.S. +!Department of Energy (DOE). These building models were derived from DOE's Commercial Reference Building Models with modifications +!based on input from the ASHRAE Standard 90.1 committee, the Advanced Energy Design Guide series, and building industry experts. The +!prototypes models were developed to quantify energy saving impacts from newly published editions of ASHRAE Standard 90.1, 189.1, IECC, +!and other energy codes and standards. The basic building descriptions can be found in the Scorecards posted at www.energycodes.gov +!website. The recommended citation of the prototype models is +! +!DOE and PNNL. 2020. Commercial Prototype Building Models, Richland, WA, Pacific Northwest National Laboratory. Available at https://www.energycodes.gov/development/commercial/prototype_models. +! +!Detailed descriptions of the prototype model development and addenda modeling strategies can be found in the following reports: +!DOE, 2020. Preliminary Energy Savings Analysis: ANSI/ASHRAE/IES Standard 90.1-2019. Report prepared by Zhang, J., M. Rosenberg, J. +!Lerond, Y. Xie, Nambia, C., Y. Chen, R. Hart, M. Halverson, D. Maddox, and S. Goel, Richland, WA, Pacific Northwest National Laboratory. +! +!Zhang, J., Y. Chen, Y. Xie, M. Rosenberg, R. Hart. Energy and Energy Cost Savings Analysis of the 2018 IECC for Commercial Buildings. +!2018. PNNL-28125. Richland, WA: Pacific Northwest National Laboratory. +! +!DOE. 2017. Energy Savings Analysis: ANSI/ASHRAE/IES Standard 90.1-2016. Prepared by Athalye, R.A, M.A. Halverson, M.I. Rosenberg, B. Liu, +!J. Zhang, R. Hart, V.V. Mendon, S. Goel, Y. Chen, Y. Xie, and M. Zhao, Richland, WA, Pacific Northwest National Laboratory. https://www.energycodes.gov/sites/default/files/documents/02202018_Standard_90.1-2016_Determination_TSD.pdf. +! +!Zhang, J., Y. Xie, R.A. Athalye, J. Zhuge, M. Rosenberg, R. Hart, and B. Liu. Energy and Energy Cost Savings Analysis of the 2015 IECC +!for Commercial Buildings. 2015. PNNL-24269 Rev. 1. Richland, WA: Pacific Northwest National +!Laboratory. https://www.energycodes.gov/sites/default/files/documents/2015_IECC_Commercial_Analysis.pdf. +! +!Halverson M.A., M.I. Rosenberg, W. Wang, J. Zhang, V.V. Mendon, R.A. Athalye, Y. Xie, R. Hart, S. Goel, 2014. ANSI/ASHRAE/IES Standard +!90.1-2013 Determination of Energy Savings: Quantitative Analysis, PNNL-23479. Richland, WA: Pacific Northwest National Laboratory. https://www.energycodes.gov/sites/default/files/documents/901-2013_finalCommercialDeterminationQuantitativeAnalysis_TSD_0.pdf. +! +!Goel S., R.A. Athalye, W. Wang, J. Zhang, M.I. Rosenberg, Y. Xie, and R. Hart, et al. 2014. Enhancements to ASHRAE Standard 90.1 +!Prototype Building Models. PNNL-23269. Richland, WA: Pacific Northwest National Laboratory. https://www.pnnl.gov/main/publications/external/technical_reports/PNNL-23269.pdf. +! +!Zhang J., R.A. Athalye, R. Hart, M.I. Rosenberg, Y. Xie, S. Goel, and V.V. Mendon, et al. 2013. Energy and Energy Cost Savings Analysis +!of the IECC for Commercial Buildings. PNNL-22760. Richland, WA: Pacific Northwest National Laboratory. http://www.pnnl.gov/main/publications/external/technical_reports/PNNL-22760.pdf. +! +!Thornton B.A., M.I. Rosenberg, E.E. Richman, W. Wang, Y. Xie, J. Zhang, H. Cho, VV Mendon, R.A. Athalye, and B. Liu. 2011. Achieving +!the 30% Goal: Energy and Cost Savings Analysis of ASHRAE Standard 90.1-2010. PNNL-20405. Richland, WA: Pacific Northwest National +!Laboratory. https://www.energycodes.gov/sites/default/files/documents/BECP_Energy_Cost_Savings_STD2010_May2011_v00.pdf. +! +! +! WeatherFile: USA_NY_Buffalo.Niagara.Intl.AP.725280_TMY3.epw + + + + +! BEGIN ECONOMIZER MAP +! Economizer Name, DX COIL Name +! PSZ-AC:1_OA_Controller, PSZ-AC:1 Heat Pump DX Cooling Coil +! PSZ-AC:2_OA_Controller, PSZ-AC:2 Heat Pump DX Cooling Coil +! PSZ-AC:3_OA_Controller, PSZ-AC:3 Heat Pump DX Cooling Coil +! PSZ-AC:4_OA_Controller, PSZ-AC:4 Heat Pump DX Cooling Coil +! PSZ-AC:5_OA_Controller, PSZ-AC:5 Heat Pump DX Cooling Coil +! END ECONOMIZER MAP + + + +! GPARM parameters as input: +! Case = ASHRAE901_OfficeSmall_STD2019_Buffalo +! SelectedCase = +! annual_run = yes +! slab_gtp = National_OfficeSmall_ASHRAE901_STD2016_Zone5A_nonres_NY-Buffalo-NY.gtp +! basement_tempt = dummy.idf +! avg_oa_tempt_ip = 48.14 +! maxdiff_oa_tempt_ip = 47.16 +! ext_wall_type = WoodFramedWall +! nonres_ext_wall_ufactor = 0.289591413 +! roof_type = WoodJoistAtticRoof +! nonres_roof_ufactor = 0.119243523 +! roof_solar_absorp = 0.7 +! nonres_window = +! sidelighting_control = yes_AY +! economizer = DifferentialDryBulb +! skip_economizer_control = No +! LPD_office = 6.888902667 +! exterior_lights_watts = 0 +! exterior_lights_watts_a = 50.7 +! exterior_lights_watts_b = 115.1 +! avg_oa_tempt = 8.966666667 +! maxdiff_oa_tempt = 26.2 +! infil = 0.00056896 +! oa_flow_per_area = 0.000431773 +! door_infil = 0.076455414 +! frac_ofpk = 0.131 +! damper_sch = MinOA_MotorizedDamper_Sched +! economizer_lockout = LockoutWithHeating +! BLDG_EQUIP_SCH = BLDG_EQUIP_SCH_ADV +! addendum_cd = 2016AS +! pv_generator = no +! pv_surface_area = 0 +! STD189_overhang = no +! swh_et = 1 +! swh_ua = 1.205980747 +! ext_lgt_sch = Exterior_Lgt_ALWAYS_ON +! LTG_SCH_SET = LTG_SET_STD2013 +! HtgSetP_Sch = HTGSETP_SCH_NO_OPTIMUM +! CLGSETP_SCH = CLGSETP_SCH_NO_OPTIMUM +! pipe_heat_loss = 571 +! skip_EMSprogram = yes +! Wfile_TMY3 = USA_NY_Buffalo.Niagara.Intl.AP.725280_TMY3.epw +! loadProfile = No +! receptacle_ctrl_occ_reduction_frac = 0.959505267 +! receptacle_ctrl_unocc_reduction_frac = 0.818955113 +! CodeName = ASHRAE90.1_STD2019 +! CZ_City_Old = Chicago +! CZ_Label = 5A +! exterior_lights_watts_c = 445.5 +! Addendum_AH = Yes +! LPD_Ctrl = 0.02 +! con_swingdoor_r = 0.475963827 +! office_standby_mode = Yes +! nonres_window_u_factor = 0.36 +! nonres_window_shgc = 0.38 +! nonresLSG = 1.1 +! AnalysisPurpose = ProgressIndicator +! AnalysisCodeName = ASHRAE901 +! AnalysisCodeYear = 2019 +! AnalysisAmendment = NoneAmend +! AnalysisPrototype = OfficeSmall +! AnalysisScope = National +! AnalysisState = National +! AnalysisClimateZone = 5A +! AnalysisCity = USA_NY_Buffalo +! var_Ffactor_IP = 0.52 +! var_Cfactor_IP = 0.119 +! Core_ZN_SWH_flow = 4.048e-06 +! VT_Elec_Wheater = No + + + + + +! specify overhang_pf for 1891 codes + + + + Version,9.0; + +!- =========== ALL OBJECTS IN CLASS: SIMULATIONCONTROL =========== + + SimulationControl, + Yes, !- Do Zone Sizing Calculation + Yes, !- Do System Sizing Calculation + Yes, !- Do Plant Sizing Calculation +No, !- Run Simulation for Sizing Periods +YES; !- Run Simulation for Weather File Run Periods + +!- =========== ALL OBJECTS IN CLASS: BUILDING =========== + + Building, + OfficeSmall, !- Name + 0.0000, !- North Axis {deg} + City, !- Terrain + 0.0400, !- Loads Convergence Tolerance Value + 0.2000, !- Temperature Convergence Tolerance Value {deltaC} + FullInteriorAndExterior, !- Solar Distribution + 25, !- Maximum Number of Warmup Days + 6; !- Minimum Number of Warmup Days + +!- =========== ALL OBJECTS IN CLASS: SHADOWCALCULATION =========== + + + ShadowCalculation, + AverageOverDaysInFrequency, !- Calculation Method + 30, !- Calculation Frequency + 15000; !- Maximum Figures in Shadow Overlap Calculations + +!- =========== ALL OBJECTS IN CLASS: SURFACECONVECTIONALGORITHM:INSIDE =========== + + + SurfaceConvectionAlgorithm:Inside,TARP; + +!- =========== ALL OBJECTS IN CLASS: SURFACECONVECTIONALGORITHM:OUTSIDE =========== + + + SurfaceConvectionAlgorithm:Outside,TARP; + +!- =========== ALL OBJECTS IN CLASS: HEATBALANCEALGORITHM =========== + + + HeatBalanceAlgorithm,ConductionTransferFunction,200.0000; + +!- =========== ALL OBJECTS IN CLASS: TIMESTEP =========== + + + Timestep,6; + +!- =========== ALL OBJECTS IN CLASS: CONVERGENCELIMITS =========== + + + ConvergenceLimits, + 1, !- Minimum System Timestep {minutes} + 20; !- Maximum HVAC Iterations + +!- =========== ALL OBJECTS IN CLASS: RUNPERIOD =========== + + + RunPeriod, + , !- Name + 1, !- Begin Month + 1, !- Begin Day of Month + , !- Begin Year + 12, !- End Month + 31, !- End Day of Month + , !- End Year + Sunday, !- Day of Week for Start Day + No, !- Use Weather File Holidays and Special Days + No, !- Use Weather File Daylight Saving Period + No, !- Apply Weekend Holiday Rule + Yes, !- Use Weather File Rain Indicators + Yes; !- Use Weather File Snow Indicators + +!- =========== ALL OBJECTS IN CLASS: RUNPERIODCONTROL:SPECIALDAYS =========== + + + + RunPeriodControl:SpecialDays, + New Years Day, !- Name + January 1, !- Start Date + 1, !- Duration {days} + Holiday; !- Special Day Type + + + + RunPeriodControl:SpecialDays, + Veterans Day, !- Name + November 11, !- Start Date + 1, !- Duration {days} + Holiday; !- Special Day Type + + + + RunPeriodControl:SpecialDays, + Christmas, !- Name + December 25, !- Start Date + 1, !- Duration {days} + Holiday; !- Special Day Type + + + + RunPeriodControl:SpecialDays, + Independence Day, !- Name + July 4, !- Start Date + 1, !- Duration {days} + Holiday; !- Special Day Type + + + + RunPeriodControl:SpecialDays, + MLK Day, !- Name + 3rd Monday in January, !- Start Date + 1, !- Duration {days} + Holiday; !- Special Day Type + + + + RunPeriodControl:SpecialDays, + Presidents Day, !- Name + 3rd Monday in February, !- Start Date + 1, !- Duration {days} + Holiday; !- Special Day Type + + + + RunPeriodControl:SpecialDays, + Memorial Day, !- Name + Last Monday in May, !- Start Date + 1, !- Duration {days} + Holiday; !- Special Day Type + + + + RunPeriodControl:SpecialDays, + Labor Day, !- Name + 1st Monday in September, !- Start Date + 1, !- Duration {days} + Holiday; !- Special Day Type + + + + RunPeriodControl:SpecialDays, + Columbus Day, !- Name + 2nd Monday in October, !- Start Date + 1, !- Duration {days} + Holiday; !- Special Day Type + + + + RunPeriodControl:SpecialDays, + Thanksgiving, !- Name + 4th Thursday in November,!- Start Date + 1, !- Duration {days} + Holiday; !- Special Day Type + +!- =========== ALL OBJECTS IN CLASS: RUNPERIODCONTROL:DAYLIGHTSAVINGTIME =========== + + + + RunPeriodControl:DaylightSavingTime, + 2nd Sunday in March, !- Start Date + 1st Sunday in November; !- End Date + +!- =========== ALL OBJECTS IN CLASS: LOCATION =========== + +! Site:Location and design-day objects created by: +! ../../_p.bin/ddy2idf /projects/bigsim/weather/EnergyPlus/tmy3.new/all/USA_NY_Buffalo.Niagara.Intl.AP.725280_TMY3.ddy +! +Site:Location, + Buffalo.Niagara.Intl.AP_NY_USA WMO=725280, !- Site:Location Name + 42.94, !- Latitude {N+ S-} + -78.74, !- Longitude {W- E+} + -5.00, !- Time Zone Relative to GMT {GMT+/-} + 215.00; !- Elevation {m} + +SizingPeriod:DesignDay, + Buffalo.Niagara.Intl.AP_NY_USA Ann Htg 99.6% Condns DB, !- Name + 1, !- Month + 21, !- Day of Month + WinterDesignDay,!- Day Type + -16.3, !- Maximum Dry-Bulb Temperature {C} + 0.0, !- Daily Dry-Bulb Temperature Range {C} + DefaultMultipliers, !- Dry-Bulb Temperature Range Modifier Type + , !- Dry-Bulb Temperature Range Modifier Day Schedule Name + Wetbulb, !- Humidity Condition Type + -16.3, !- Wetbulb at Maximum Dry-Bulb {C} + , !- Humidity Indicating Day Schedule Name + , !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir} + , !- Enthalpy at Maximum Dry-Bulb {J/kg} + , !- Daily WetBulb Temperature Range {deltaC} + 98769., !- Barometric Pressure {Pa} + 5.1, !- Wind Speed {m/s} design conditions vs. traditional 6.71 m/s (15 mph) + 270, !- Wind Direction {Degrees; N=0, S=180} + No, !- Rain {Yes/No} + No, !- Snow on ground {Yes/No} + No, !- Daylight Savings Time Indicator + ASHRAEClearSky, !- Solar Model Indicator + , !- Beam Solar Day Schedule Name + , !- Diffuse Solar Day Schedule Name + , !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) + , !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) + 0.00; !- Clearness {0.0 to 1.1} + +SizingPeriod:DesignDay, + Buffalo.Niagara.Intl.AP_NY_USA Ann Clg .4% Condns DB=>MWB, !- Name + 7, !- Month + 21, !- Day of Month + SummerDesignDay,!- Day Type + 30.3, !- Maximum Dry-Bulb Temperature {C} + 9.3, !- Daily Dry-Bulb Temperature Range {C} + DefaultMultipliers, !- Dry-Bulb Temperature Range Modifier Type + , !- Dry-Bulb Temperature Range Modifier Day Schedule Name + Wetbulb, !- Humidity Condition Type + 21.8, !- Wetbulb at Maximum Dry-Bulb {C} + , !- Humidity Indicating Day Schedule Name + , !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir} + , !- Enthalpy at Maximum Dry-Bulb {J/kg} + , !- Daily WetBulb Temperature Range {deltaC} + 98769., !- Barometric Pressure {Pa} + 5.7, !- Wind Speed {m/s} design conditions vs. traditional 3.35 m/s (7mph) + 240, !- Wind Direction {Degrees; N=0, S=180} + No, !- Rain {Yes/No} + No, !- Snow on ground {Yes/No} + No, !- Daylight Savings Time Indicator + ASHRAETau, !- Solar Model Indicator + , !- Beam Solar Day Schedule Name + , !- Diffuse Solar Day Schedule Name + 0.462, !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) + 2.001; !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) + + +!- =========== ALL OBJECTS IN CLASS: WATER MAINS TEMPERATURES =========== + + + Site:WaterMainsTemperature, + Correlation, !- Calculation Method + , !- Temperature Schedule Name +8.96666666666667, !- Annual average outdoor air temperature {C} +26.2; !- Maximum difference in monthly average outdoor air temperatures {C} + + +!- =========== ALL OBJECTS IN CLASS: Site:GroundTemperature:FCfactorMethod =========== + +Site:GroundTemperature:FCfactorMethod, +9.7, !- January Ground Temperature {C} +6.0, !- February Ground Temperature {C} +-2.2, !- March Ground Temperature {C} +-3.4, !- April Ground Temperature {C} +-4.2, !- May Ground Temperature {C} +2.7, !- June Ground Temperature {C} +7.5, !- July Ground Temperature {C} +13.7, !- August Ground Temperature {C} +18.6, !- September Ground Temperature {C} +22.0, !- October Ground Temperature {C} +20.7, !- November Ground Temperature {C} +16.5; !- December Ground Temperature {C} + + + +!- =========== ALL OBJECTS IN CLASS: MATERIAL:REGULAR-R =========== + + Material:NoMass, + Opaque Door panel_con, !- Name + MediumRough, !- Roughness + 0.475963827, !- Thermal Resistance {m2-K/W} + 0.9, !- Thermal Absorptance + 0.7, !- Solar Absorptance + 0.7; !- Visible Absorptance + +!- =========== ALL OBJECTS IN CLASS: CONSTRUCTION =========== + + Construction, + Swinging Door_con, !- Name + Opaque Door panel_con; !- Outside Layer + +!- =========== ALL OBJECTS IN CLASS: SCHEDULETYPELIMITS =========== + + + ScheduleTypeLimits, + Any Number; !- Name + + ScheduleTypeLimits, + Fraction, !- Name + 0.0, !- Lower Limit Value + 1.0, !- Upper Limit Value + CONTINUOUS; !- Numeric Type + + ScheduleTypeLimits, + Temperature, !- Name + -60, !- Lower Limit Value + 200, !- Upper Limit Value + CONTINUOUS; !- Numeric Type + + ScheduleTypeLimits, + On/Off, !- Name + 0, !- Lower Limit Value + 1, !- Upper Limit Value + DISCRETE; !- Numeric Type + + ScheduleTypeLimits, + Control Type, !- Name + 0, !- Lower Limit Value + 4, !- Upper Limit Value + DISCRETE; !- Numeric Type + + ScheduleTypeLimits, + Humidity, !- Name + 10, !- Lower Limit Value + 90, !- Upper Limit Value + CONTINUOUS; !- Numeric Type + + ScheduleTypeLimits, + Number; !- Name + +!- =========== ALL OBJECTS IN CLASS: SCHEDULE:COMPACT =========== + + + + + + + + + + + + + + + + + Schedule:Compact, + BLDG_LIGHT_SCH, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: Weekdays, !- Field 2 + Until: 5:00,0.18, !- Field 3 + Until: 6:00,0.23, !- Field 4 + Until: 7:00,0.178641345, !- Field 5 + Until: 8:00,0.32621463, !- Field 6 + Until: 12:00,0.69903135, !- Field 7 + Until: 13:00,0.6213612, !- Field 8 + Until: 17:00,0.69903135, !- Field 9 + Until: 18:00,0.473787915, !- Field 10 + Until: 20:00,0.32621463, !- Field 11 + Until: 22:00,0.24854448, !- Field 12 + Until: 23:00,0.178641345, !- Field 13 + Until: 24:00,0.18, !- Field 14 + For: Weekends, !- Field 15 + Until: 24:00,0.18, !- Field 16 + For: Holiday, !- Field 17 + Until: 24:00,0.18, !- Field 18 + For: WinterDesignDay, !- Field 19 + Until: 24:00,0, !- Field 20 + For: SummerDesignDay, !- Field 21 + Until: 24:00,1, !- Field 22 + For: CustomDay1, !- Field 23 + Until: 24:00,0, !- Field 24 + For: CustomDay2, !- Field 25 + Until: 24:00,0; !- Field 26 + + + + + + + Schedule:Compact, + BLDG_EQUIP_SCH, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: WeekDays, !- Field 2 + Until: 6:00,0.4094775565, !- Field 3 + Until: 8:00,0.4797526335, !- Field 3 + Until: 12:00,0.959505267, !- Field 5 + Until: 13:00,0.90193495098, !- Field 7 + Until: 17:00,0.959505267, !- Field 9 + Until: 18:00,0.4797526335, !- Field 11 + Until: 23:00,0.1919010534, !- Field 13 + Until: 24:00,0.1637910226, !- Field 13 + For: Weekends, !- Field 15 + Until: 24:00,0.1637910226, !- Field 16 + For: Holiday, !- Field 18 + Until: 24:00,0.1637910226, !- Field 19 + For: WinterDesignDay, !- Field 21 + Until: 24:00,0.0, !- Field 22 + For: SummerDesignDay, !- Field 24 + Until: 24:00,1.0, !- Field 25 + For: CustomDay1, !- Field 27 + Until: 24:00,0.0, !- Field 28 + For: CustomDay2, !- Field 30 + Until: 24:00,0.0; !- Field 31 + + Schedule:Compact, + BLDG_OCC_SCH, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: Weekdays, !- Field 2 + Until: 6:00,0.0, !- Field 3 + Until: 7:00,0.11, !- Field 5 + Until: 8:00,0.21, !- Field 7 + Until: 12:00,1.0, !- Field 9 + Until: 13:00,0.53, !- Field 11 + Until: 17:00,1.0, !- Field 13 + Until: 18:00,0.32, !- Field 15 + Until: 22:00,0.11, !- Field 17 + Until: 23:00,0.05, !- Field 19 + Until: 24:00,0.0, !- Field 21 + For: Weekends, !- Field 23 + Until: 24:00,0.0, !- Field 24 + For: Holiday, !- Field 26 + Until: 24:00,0.0, !- Field 27 + For: WinterDesignDay, !- Field 29 + Until: 24:00,0.0, !- Field 30 + For: SummerDesignDay, !- Field 32 + Until: 24:00,1.0, !- Field 33 + For: CustomDay1, !- Field 35 + Until: 24:00,0.0, !- Field 36 + For: CustomDay2, !- Field 38 + Until: 24:00,0.0; !- Field 39 + + Schedule:Compact, + BLDG_OCC_SCH_w_SB, !-Name + Fraction, !-Schedule Type Limits Name + Through: 12/31, + For: Weekdays, + Until: 01:00, 0, + Until: 02:00, 0, + Until: 03:00, 0, + Until: 04:00, 0, + Until: 05:00, 0, + Until: 06:00, 0, + Until: 07:00, 0.11, + Until: 08:00, 0.21, + Until: 09:00, 1, + Until: 10:00, 1, + Until: 11:00, 0, + Until: 12:00, 1, + Until: 13:00, 0, + Until: 14:00, 1, + Until: 15:00, 0, + Until: 16:00, 1, + Until: 17:00, 1, + Until: 18:00, 0.32, + Until: 19:00, 0.11, + Until: 20:00, 0.11, + Until: 21:00, 0.11, + Until: 22:00, 0.11, + Until: 23:00, 0.05, + Until: 24:00, 0, + For: Weekends, + Until: 01:00, 0, + Until: 02:00, 0, + Until: 03:00, 0, + Until: 04:00, 0, + Until: 05:00, 0, + Until: 06:00, 0, + Until: 07:00, 0, + Until: 08:00, 0, + Until: 09:00, 0, + Until: 10:00, 0, + Until: 11:00, 0, + Until: 12:00, 0, + Until: 13:00, 0, + Until: 14:00, 0, + Until: 15:00, 0, + Until: 16:00, 0, + Until: 17:00, 0, + Until: 18:00, 0, + Until: 19:00, 0, + Until: 20:00, 0, + Until: 21:00, 0, + Until: 22:00, 0, + Until: 23:00, 0, + Until: 24:00, 0, + For: Holiday, + Until: 24:00,0.0, + For: WinterDesignDay, + Until: 24:00,0.0, + For: SummerDesignDay, + Until: 24:00,1.0, + For: CustomDay1, + Until: 24:00,0.0, + For: CustomDay2, + Until: 24:00,0.0; + Schedule:Compact, + BLDG_OCC_SCH_wo_SB, !-Name + Fraction, !-Schedule Type Limits Name + Through: 12/31, + For: Weekdays, + Until: 01:00, 0, + Until: 02:00, 0, + Until: 03:00, 0, + Until: 04:00, 0, + Until: 05:00, 0, + Until: 06:00, 0, + Until: 07:00, 0.11, + Until: 08:00, 0.21, + Until: 09:00, 1, + Until: 10:00, 1, + Until: 11:00, 1, + Until: 12:00, 1, + Until: 13:00, 0.610394505402463, + Until: 14:00, 1, + Until: 15:00, 1, + Until: 16:00, 1, + Until: 17:00, 1, + Until: 18:00, 0.32, + Until: 19:00, 0.11, + Until: 20:00, 0.11, + Until: 21:00, 0.11, + Until: 22:00, 0.11, + Until: 23:00, 0.05, + Until: 24:00, 0, + For: Weekends, + Until: 01:00, 0, + Until: 02:00, 0, + Until: 03:00, 0, + Until: 04:00, 0, + Until: 05:00, 0, + Until: 06:00, 0, + Until: 07:00, 0, + Until: 08:00, 0, + Until: 09:00, 0, + Until: 10:00, 0, + Until: 11:00, 0, + Until: 12:00, 0, + Until: 13:00, 0, + Until: 14:00, 0, + Until: 15:00, 0, + Until: 16:00, 0, + Until: 17:00, 0, + Until: 18:00, 0, + Until: 19:00, 0, + Until: 20:00, 0, + Until: 21:00, 0, + Until: 22:00, 0, + Until: 23:00, 0, + Until: 24:00, 0, + For: Holiday, + Until: 24:00,0.0, + For: WinterDesignDay, + Until: 24:00,0.0, + For: SummerDesignDay, + Until: 24:00,1.0, + For: CustomDay1, + Until: 24:00,0.0, + For: CustomDay2, + Until: 24:00,0.0; + Schedule:Compact, + Binary Occupancy, !-Name + Fraction, !-Schedule Type Limits Name + Through: 12/31, + For: Weekdays, + Until: 01:00, 0, + Until: 02:00, 0, + Until: 03:00, 0, + Until: 04:00, 0, + Until: 05:00, 0, + Until: 06:00, 0, + Until: 07:00, 1, + Until: 08:00, 1, + Until: 09:00, 1, + Until: 10:00, 1, + Until: 11:00, 1, + Until: 12:00, 1, + Until: 13:00, 1, + Until: 14:00, 1, + Until: 15:00, 1, + Until: 16:00, 1, + Until: 17:00, 1, + Until: 18:00, 1, + Until: 19:00, 1, + Until: 20:00, 1, + Until: 21:00, 1, + Until: 22:00, 1, + Until: 23:00, 1, + Until: 24:00, 0, + For: Weekends, + Until: 01:00, 0, + Until: 02:00, 0, + Until: 03:00, 0, + Until: 04:00, 0, + Until: 05:00, 0, + Until: 06:00, 0, + Until: 07:00, 0, + Until: 08:00, 0, + Until: 09:00, 0, + Until: 10:00, 0, + Until: 11:00, 0, + Until: 12:00, 0, + Until: 13:00, 0, + Until: 14:00, 0, + Until: 15:00, 0, + Until: 16:00, 0, + Until: 17:00, 0, + Until: 18:00, 0, + Until: 19:00, 0, + Until: 20:00, 0, + Until: 21:00, 0, + Until: 22:00, 0, + Until: 23:00, 0, + Until: 24:00, 0, + For: Holiday, + Until: 24:00,0.0, + For: WinterDesignDay, + Until: 24:00,0.0, + For: SummerDesignDay, + Until: 24:00,1.0, + For: CustomDay1, + Until: 24:00,0.0, + For: CustomDay2, + Until: 24:00,0.0; + Schedule:Compact, + INFIL_QUARTER_ON_SCH, !- Name + fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: Weekdays SummerDesignDay, !- Field 2 + Until: 07:00,1.0, !- Field 3 + Until: 19:00,0.25, !- Field 5 + Until: 24:00,1.0, !- Field 7 + For: Saturday WinterDesignDay, !- Field 9 + Until: 07:00,1.0, !- Field 10 + Until: 18:00,0.25, !- Field 12 + Until: 24:00,1.0, !- Field 14 + For: Sunday Holidays AllOtherDays, !- Field 16 + Until: 24:00,1.0; !- Field 17 + + Schedule:Compact, + INFIL_Door_Opening_SCH, !- Name + fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: Weekdays, !- Field 2 + Until: 06:00,0.0, !- Field 3 + Until: 07:00, + 0.131, !- Field 6 + Until: 08:00,1.0, !- Field 7 + Until: 12:00, + 0.131, !- Field 10 + Until: 13:00,1.0, !- Field 11 + Until: 17:00, + 0.131, !- Field 14 + Until: 18:00,1.0, !- Field 15 + Until: 19:00, + 0.131, !- Field 18 + Until: 24:00,0.0, !- Field 19 + For: Saturday Sunday Holidays AllOtherDays, !- Field 21 + Until: 24:00,0.0; !- Field 22 + + + + Schedule:Compact, + BLDG_SWH_SCH, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: WeekDays, !- Field 2 + Until: 7:00,0.0, !- Field 3 + Until: 8:00,0.27, !- Field 5 + Until: 9:00,0.55, !- Field 7 + Until: 11:00,0.64, !- Field 9 + Until: 12:00,0.82, !- Field 11 + Until: 13:00,1.0, !- Field 13 + Until: 14:00,0.91, !- Field 15 + Until: 16:00,0.55, !- Field 17 + Until: 17:00,0.73, !- Field 19 + Until: 19:00,0.37, !- Field 21 + Until: 20:00,0.18, !- Field 23 + Until: 21:00,0.27, !- Field 25 + Until: 22:00,0.09, !- Field 27 + Until: 24:00,0.0, !- Field 29 + For: Weekends, !- Field 31 + Until: 24:00,0.0, !- Field 32 + For: Holiday, !- Field 34 + Until: 24:00,0.0, !- Field 35 + For: WinterDesignDay, !- Field 37 + Until: 7:00,0.0, !- Field 38 + Until: 8:00,0.27, !- Field 40 + Until: 9:00,0.55, !- Field 42 + Until: 11:00,0.64, !- Field 44 + Until: 12:00,0.82, !- Field 46 + Until: 13:00,1.0, !- Field 48 + Until: 14:00,0.91, !- Field 50 + Until: 16:00,0.55, !- Field 52 + Until: 17:00,0.73, !- Field 54 + Until: 19:00,0.37, !- Field 56 + Until: 20:00,0.18, !- Field 58 + Until: 21:00,0.27, !- Field 60 + Until: 22:00,0.09, !- Field 62 + Until: 24:00,0.0, !- Field 64 + For: SummerDesignDay, !- Field 66 + Until: 7:00,0.0, !- Field 67 + Until: 8:00,0.27, !- Field 69 + Until: 9:00,0.55, !- Field 71 + Until: 11:00,0.64, !- Field 73 + Until: 12:00,0.82, !- Field 75 + Until: 13:00,1.0, !- Field 77 + Until: 14:00,0.91, !- Field 79 + Until: 16:00,0.55, !- Field 81 + Until: 17:00,0.73, !- Field 83 + Until: 19:00,0.37, !- Field 85 + Until: 20:00,0.18, !- Field 87 + Until: 21:00,0.27, !- Field 89 + Until: 22:00,0.09, !- Field 91 + Until: 24:00,0.0, !- Field 93 + For: CustomDay1, !- Field 95 + Until: 24:00,0.0, !- Field 96 + For: CustomDay2, !- Field 98 + Until: 24:00,0.0; !- Field 99 + + Schedule:Compact, + ALWAYS_ON, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,1.0; !- Field 3 + + Schedule:Compact, + Exterior_Lgt_ALWAYS_ON, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,1; !- Field 3 + + + Schedule:Compact, + Exterior_Lgt_189_1, !- Name + Fraction, !- Schedule Type Limits Name + Through:12/31, !- Field 1 + For:Weekdays, !- Field 2 + Until: 9:00,0.5, !- Field 3 + Until: 23:00,1.0, !- Field 5 + Until: 24:00,0.5, !- Field 7 + For:Saturday, !- Field 9 + Until: 24:00,0.5, !- Field 10 + FOR:Sunday Holidays AllOtherDays, !- Field 12 + Until: 24:00,0.5; !- Field 13 + + Schedule:Compact, + ALWAYS_OFF, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,0.0; !- Field 3 + + + + Schedule:Compact, + HVACOperationSchd, !- Name + on/off, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: Weekdays SummerDesignDay, !- Field 2 + Until: 06:00,0.0, !- Field 3 + Until: 19:00,1.0, !- Field 5 + Until: 24:00,0.0, !- Field 7 + For: Weedends WinterDesignDay, !- Field 9 + Until: 24:00,0.0, !- Field 10 + For: Holidays AllOtherDays, !- Field 12 + Until: 24:00,0.0; !- Field 13 + + Schedule:Compact, + HVACOperationSchd_w_SB, !-Name + Fraction, !-Schedule Type Limits Name + Through: 12/31, + For: Weekdays, + Until: 01:00, 0, + Until: 02:00, 0, + Until: 03:00, 0, + Until: 04:00, 0, + Until: 05:00, 0, + Until: 06:00, 0, + Until: 07:00, 1, + Until: 08:00, 1, + Until: 09:00, 1, + Until: 10:00, 1, + Until: 11:00, 0, + Until: 12:00, 1, + Until: 13:00, 0, + Until: 14:00, 1, + Until: 15:00, 0, + Until: 16:00, 1, + Until: 17:00, 1, + Until: 18:00, 1, + Until: 19:00, 1, + Until: 20:00, 0, + Until: 21:00, 0, + Until: 22:00, 0, + Until: 23:00, 0, + Until: 24:00, 0, + For: Weekends, + Until: 01:00, 0, + Until: 02:00, 0, + Until: 03:00, 0, + Until: 04:00, 0, + Until: 05:00, 0, + Until: 06:00, 0, + Until: 07:00, 0, + Until: 08:00, 0, + Until: 09:00, 0, + Until: 10:00, 0, + Until: 11:00, 0, + Until: 12:00, 0, + Until: 13:00, 0, + Until: 14:00, 0, + Until: 15:00, 0, + Until: 16:00, 0, + Until: 17:00, 0, + Until: 18:00, 0, + Until: 19:00, 0, + Until: 20:00, 0, + Until: 21:00, 0, + Until: 22:00, 0, + Until: 23:00, 0, + Until: 24:00, 0, + For: SummerDesignDay, + Until: 06:00, + 0.0, + Until: 19:00, + 1.0, + Until: 24:00, + 0.0, + For: WinterDesignDay, + Until: 24:00, + 0.0, + For: Holidays AllOtherDays, + Until: 24:00, + 0.0; + Schedule:Compact, + PlantOnSched, !- Name + On/Off, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,1.0; !- Field 3 + + Schedule:Compact, + ReheatCoilAvailSched, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,1.0; !- Field 3 + + Schedule:Compact, + CoolingCoilAvailSched, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,1.0; !- Field 3 + + Schedule:Compact, + HTGSETP_SCH_NO_OPTIMUM, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: WeekDays, !- Field 2 + Until: 6:00,15.56, !- Field 3 + Until: 7:00,21.11, !- Field 5 + Until: 19:00,21.11, !- Field 7 + Until: 24:00,15.56, !- Field 9 + For: Weekends, !- Field 11 + Until: 24:00,15.56, !- Field 12 + For: Holiday, !- Field 14 + Until: 24:00,15.56, !- Field 15 + For: WinterDesignDay, !- Field 17 + Until: 24:00,21.11, !- Field 18 + For: SummerDesignDay, !- Field 20 + Until: 24:00,15.56, !- Field 21 + For: CustomDay1, !- Field 23 + Until: 24:00,15.56, !- Field 24 + For: CustomDay2, !- Field 26 + Until: 24:00,15.56; !- Field 27 + Schedule:Compact, + HTGSETP_SCH_NO_OPTIMUM_w_SB, !-Name + Temperature, !-Schedule Type Limits Name + Through: 12/31, + For: Weekdays, + Until: 01:00, 15.56, + Until: 02:00, 15.56, + Until: 03:00, 15.56, + Until: 04:00, 15.56, + Until: 05:00, 15.56, + Until: 06:00, 15.56, + Until: 07:00, 21.11, + Until: 08:00, 21.11, + Until: 09:00, 21.11, + Until: 10:00, 21.11, + Until: 11:00, 20.5544444444444, + Until: 12:00, 21.11, + Until: 13:00, 20.5544444444444, + Until: 14:00, 21.11, + Until: 15:00, 20.5544444444444, + Until: 16:00, 21.11, + Until: 17:00, 21.11, + Until: 18:00, 21.11, + Until: 19:00, 21.11, + Until: 20:00, 15.56, + Until: 21:00, 15.56, + Until: 22:00, 15.56, + Until: 23:00, 15.56, + Until: 24:00, 15.56, + For: Weekends, + Until: 01:00, 15.56, + Until: 02:00, 15.56, + Until: 03:00, 15.56, + Until: 04:00, 15.56, + Until: 05:00, 15.56, + Until: 06:00, 15.56, + Until: 07:00, 15.56, + Until: 08:00, 15.56, + Until: 09:00, 15.56, + Until: 10:00, 15.56, + Until: 11:00, 15.56, + Until: 12:00, 15.56, + Until: 13:00, 15.56, + Until: 14:00, 15.56, + Until: 15:00, 15.56, + Until: 16:00, 15.56, + Until: 17:00, 15.56, + Until: 18:00, 15.56, + Until: 19:00, 15.56, + Until: 20:00, 15.56, + Until: 21:00, 15.56, + Until: 22:00, 15.56, + Until: 23:00, 15.56, + Until: 24:00, 15.56, + For: Holiday, + Until: 24:00,15.56, + For: WinterDesignDay, + Until: 24:00,21.11, + For: SummerDesignDay, + Until: 24:00,15.56, + For: CustomDay1, + Until: 24:00,15.56, + For: CustomDay2, + Until: 24:00,15.56; + + Schedule:Compact, + HTGSETP_SCH_YES_OPTIMUM, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: WeekDays, !- Field 2 + Until: 6:00,15.56, !- Field 3 + Until: 7:00,17.8, !- Field 5 + Until: 8:00,20.0, !- Field 7 + Until: 19:00,21.11, !- Field 9 + Until: 24:00,15.56, !- Field 11 + For: Weekends, !- Field 13 + Until: 24:00,15.56, !- Field 14 + For: Holiday, !- Field 16 + Until: 24:00,15.56, !- Field 17 + For: WinterDesignDay, !- Field 19 + Until: 24:00,21.11, !- Field 20 + For: SummerDesignDay, !- Field 22 + Until: 24:00,15.56, !- Field 23 + For: CustomDay1, !- Field 25 + Until: 24:00,15.56, !- Field 26 + For: CustomDay2, !- Field 28 + Until: 24:00,15.56; !- Field 29 + + Schedule:Compact, + CLGSETP_SCH_NO_OPTIMUM, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: WeekDays, !- Field 2 + Until: 6:00,29.44, !- Field 3 + Until: 7:00,23.89, !- Field 5 + Until: 18:00,23.89, !- Field 7 + Until: 24:00,29.44, !- Field 9 + For: Weekends, !- Field 11 + Until: 24:00,29.44, !- Field 12 + For: Holiday, !- Field 14 + Until: 24:00,29.44, !- Field 15 + For: WinterDesignDay, !- Field 17 + Until: 24:00,29.44, !- Field 18 + For: SummerDesignDay, !- Field 20 + Until: 24:00,23.89, !- Field 21 + For: CustomDay1, !- Field 23 + Until: 24:00,29.44, !- Field 24 + For: CustomDay2, !- Field 26 + Until: 24:00,29.44; !- Field 27 + Schedule:Compact, + CLGSETP_SCH_NO_OPTIMUM_w_SB, !-Name + Temperature, !-Schedule Type Limits Name + Through: 12/31, + For: Weekdays, + Until: 01:00, 29.44, + Until: 02:00, 29.44, + Until: 03:00, 29.44, + Until: 04:00, 29.44, + Until: 05:00, 29.44, + Until: 06:00, 29.44, + Until: 07:00, 23.89, + Until: 08:00, 23.89, + Until: 09:00, 23.89, + Until: 10:00, 23.89, + Until: 11:00, 24.4455555555556, + Until: 12:00, 23.89, + Until: 13:00, 24.4455555555556, + Until: 14:00, 23.89, + Until: 15:00, 24.4455555555556, + Until: 16:00, 23.89, + Until: 17:00, 23.89, + Until: 18:00, 23.89, + Until: 19:00, 29.44, + Until: 20:00, 29.44, + Until: 21:00, 29.44, + Until: 22:00, 29.44, + Until: 23:00, 29.44, + Until: 24:00, 29.44, + For: Weekends, + Until: 01:00, 29.44, + Until: 02:00, 29.44, + Until: 03:00, 29.44, + Until: 04:00, 29.44, + Until: 05:00, 29.44, + Until: 06:00, 29.44, + Until: 07:00, 29.44, + Until: 08:00, 29.44, + Until: 09:00, 29.44, + Until: 10:00, 29.44, + Until: 11:00, 29.44, + Until: 12:00, 29.44, + Until: 13:00, 29.44, + Until: 14:00, 29.44, + Until: 15:00, 29.44, + Until: 16:00, 29.44, + Until: 17:00, 29.44, + Until: 18:00, 29.44, + Until: 19:00, 29.44, + Until: 20:00, 29.44, + Until: 21:00, 29.44, + Until: 22:00, 29.44, + Until: 23:00, 29.44, + Until: 24:00, 29.44, + For: Holiday, + Until: 24:00,29.44, + For: WinterDesignDay, + Until: 24:00,29.44, + For: SummerDesignDay, + Until: 24:00,23.89, + For: CustomDay1, + Until: 24:00,29.44, + For: CustomDay2, + Until: 24:00,29.44; + + Schedule:Compact, + CLGSETP_SCH_YES_OPTIMUM, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: WeekDays, !- Field 2 + Until: 6:00,29.44, !- Field 3 + Until: 7:00,27.8, !- Field 5 + Until: 8:00,25.6, !- Field 7 + Until: 18:00,23.89, !- Field 9 + Until: 24:00,29.44, !- Field 11 + For: Weekends, !- Field 13 + Until: 24:00,29.44, !- Field 14 + For: Holiday, !- Field 16 + Until: 24:00,29.44, !- Field 17 + For: WinterDesignDay, !- Field 19 + Until: 24:00,29.44, !- Field 20 + For: SummerDesignDay, !- Field 22 + Until: 24:00,23.89, !- Field 23 + For: CustomDay1, !- Field 25 + Until: 24:00,29.44, !- Field 26 + For: CustomDay2, !- Field 28 + Until: 24:00,29.44; !- Field 29 + + + + Schedule:Compact, + CLGSETP_SCH_NO_SETBACK, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: WeekDays, !- Field 2 + Until: 6:00,23.89, !- Field 3 + Until: 7:00,23.89, !- Field 5 + Until: 18:00,23.89, !- Field 7 + Until: 24:00,23.89, !- Field 9 + For: Weekends, !- Field 11 + Until: 24:00,23.89, !- Field 12 + For: Holiday, !- Field 14 + Until: 24:00,23.89, !- Field 15 + For: WinterDesignDay, !- Field 17 + Until: 24:00,29.44, !- Field 18 + For: SummerDesignDay, !- Field 20 + Until: 24:00,23.89, !- Field 21 + For: CustomDay1, !- Field 23 + Until: 24:00,23.89, !- Field 24 + For: CustomDay2, !- Field 26 + Until: 24:00,23.89; !- Field 27 + + Schedule:Compact, + Humidity Setpoint Schedule, !- Name + Humidity, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: Weekdays SummerDesignDay, !- Field 2 + Until: 24:00,50, !- Field 3 + For: Saturday WinterDesignDay, !- Field 5 + Until: 24:00,50, !- Field 6 + For: Sunday Holidays AllOtherDays, !- Field 8 + Until: 24:00,50; !- Field 9 + + Schedule:Compact, + MinOA_MotorizedDamper_Sched, !- Name + fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: Weekdays SummerDesignDay, !- Field 2 + Until: 07:00,0.0, !- Field 3 + Until: 19:00,1.0, !- Field 5 + Until: 24:00,0.0, !- Field 7 + For: Weekends WinterDesignDay, !- Field 9 + Until: 24:00,0.0, !- Field 10 + For: Holidays AllOtherDays, !- Field 12 + Until: 24:00,0.0; !- Field 13 + + Schedule:Compact, + MinOA_Sched, !- Name + fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,1.0; !- Field 3 + + Schedule:Compact, + Dual Zone Control Type Sched, !- Name + Control Type, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,4; !- Field 3 + + Schedule:Compact, + Seasonal-Reset-Supply-Air-Temp-Sch, !- Name + Temperature, !- Schedule Type Limits Name + Through: 3/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,13.0, !- Field 3 + Through: 9/30, !- Field 5 + For: AllDays, !- Field 6 + Until: 24:00,13.0, !- Field 7 + Through: 12/31, !- Field 9 + For: AllDays, !- Field 10 + Until: 24:00,13.0; !- Field 11 + + Schedule:Compact, + CW-Loop-Temp-Schedule, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,6.7; !- Field 3 + + Schedule:Compact, + HW-Loop-Temp-Schedule, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,60.; !- Field 3 + + Schedule:Compact, + Heating-Supply-Air-Temp-Sch, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,16.0; !- Field 3 + + Schedule:Compact, + ACTIVITY_SCH, !- Name + Any Number, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,120.; !- Field 3 + + Schedule:Compact, + WORK_EFF_SCH, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,0.0; !- Field 3 + + Schedule:Compact, + AIR_VELO_SCH, !- Name + Any Number, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,0.2; !- Field 3 + + Schedule:Compact, + CLOTHING_SCH, !- Name + Any Number, !- Schedule Type Limits Name + Through: 04/30, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,1.0, !- Field 3 + Through: 09/30, !- Field 5 + For: AllDays, !- Field 6 + Until: 24:00,0.5, !- Field 7 + Through: 12/31, !- Field 9 + For: AllDays, !- Field 10 + Until: 24:00,1.0; !- Field 11 + + Schedule:Compact, + SHADING_SCH, !- Name + Any Number, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,0.0; !- Field 3 + + Schedule:Compact, + Core_ZN Water Equipment Latent fract sched, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,0.05; !- Field 3 + + Schedule:Compact, + Core_ZN Water Equipment Sensible fract sched, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,0.2; !- Field 3 + + Schedule:Compact, + Core_ZN Water Equipment Temp Sched, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,48.8; !- Field 3 + + Schedule:Compact, + Core_ZN Water Equipment Hot Supply Temp Sched, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,55; !- Field 3 + + + + Schedule:Compact, + SHWSys1-Loop-Temp-Schedule, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,60; !- Field 3 + + + + Schedule:Compact, + SHWSys1 Water Heater Setpoint Temperature Schedule, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,60.00; !- Field 3 + + Schedule:Compact, + SHWSys1 Water Heater Ambient Temperature Schedule, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,22.0; !- Field 3 + +!- =========== ALL OBJECTS IN CLASS: CONSTRUCTION =========== + + +! +!- =========== ALL OBJECTS IN CLASS: MATERIAL:REGULAR =========== + + Material, + Std Wood 6inch, !- Name + MediumSmooth, !- Roughness + 0.15, !- Thickness {m} + 0.12, !- Conductivity {W/m-K} + 540.0000, !- Density {kg/m3} + 1210, !- Specific Heat {J/kg-K} + 0.9000000, !- Thermal Absorptance + 0.7000000, !- Solar Absorptance + 0.7000000; !- Visible Absorptance + + Material, + AC02 Acoustic Ceiling, !- Name + MediumSmooth, !- Roughness + 1.2700000E-02, !- Thickness {m} + 5.7000000E-02, !- Conductivity {W/m-K} + 288.0000, !- Density {kg/m3} + 1339.000, !- Specific Heat {J/kg-K} + 0.9000000, !- Thermal Absorptance + 0.7000000, !- Solar Absorptance + 0.2000000; !- Visible Absorptance + + Material, + F07 25mm stucco, !- Name + Smooth, !- Roughness + 0.0254, !- Thickness {m} + 0.72, !- Conductivity {W/m-K} + 1856, !- Density {kg/m3} + 840, !- Specific Heat {J/kg-K} + 0.9, !- Thermal Absorptance + 0.7, !- Solar Absorptance + 0.7; !- Visible Absorptance + + Material, + F08 Metal surface, !- Name + Smooth, !- Roughness + 0.0008, !- Thickness {m} + 45.28, !- Conductivity {W/m-K} + 7824, !- Density {kg/m3} + 500; !- Specific Heat {J/kg-K} + + Material, + F08 Metal roof surface, !- Name + Smooth, !- Roughness + 0.0008, !- Thickness {m} + 45.28, !- Conductivity {W/m-K} + 7824, !- Density {kg/m3} + 500, !- Specific Heat {J/kg-K} + 0.9, !- Absorptance:Thermal + 0.7; !- Absorptance:Solar + + Material, + F12 Asphalt shingles, !- Name + VeryRough, !- Roughness + 0.0032, !- Thickness {m} + 0.04, !- Conductivity {W/m-K} + 1120, !- Density {kg/m3} + 1260, !- Specific Heat {J/kg-K} + 0.9, !- Absorptance:Thermal + 0.7; !- Absorptance:Solar + + Material, + F13 Built-up roofing, !- Name + Rough, !- Roughness + 0.0095, !- Thickness {m} + 0.16, !- Conductivity {W/m-K} + 1120, !- Density {kg/m3} + 1460, !- Specific Heat {J/kg-K} + 0.9, !- Absorptance:Thermal + 0.7; !- Absorptance:Solar + + Material, + G01 13mm gypsum board, !- Name + Smooth, !- Roughness + 0.0127, !- Thickness {m} + 0.1600, !- Conductivity {W/m-K} + 800.0000, !- Density {kg/m3} + 1090.0000, !- Specific Heat {J/kg-K} + 0.9000, !- Absorptance:Thermal + 0.7000, !- Absorptance:Solar + 0.5000; !- Absorptance:Visible + + Material, + G01 16mm gypsum board, !- Name + MediumSmooth, !- Roughness + 0.0159, !- Thickness {m} + 0.16, !- Conductivity {W/m-K} + 800, !- Density {kg/m3} + 1090; !- Specific Heat {J/kg-K} + + Material, + G02 16mm plywood, !- Name + Smooth, !- Roughness + 0.0159, !- Thickness {m} + 0.12, !- Conductivity {W/m-K} + 544, !- Density {kg/m3} + 1210; !- Specific Heat {J/kg-K} + + Material, + M14 150mm heavyweight concrete roof, !- Name + MediumRough, !- Roughness + 0.1524, !- Thickness {m} + 2.31, !- Conductivity {W/m-K} + 2322, !- Density {kg/m3} + 832; !- Specific Heat {J/kg-K} + + + Material, + 100mm Normalweight concrete wall, !- Name - based on 90.1-2004 Appendix-Table A3-1B + MediumRough, !- Roughness + 0.1016, !- Thickness {m} + 2.31, !- Conductivity {W/m-K} + 2322, !- Density {kg/m3} + 832; !- Specific Heat {J/kg-K} + + + Material, + 200mm Normalweight concrete wall, !- Name - based on 90.1-2004 Appendix-Table A3-1B + MediumRough, !- Roughness + 0.2032, !- Thickness {m} + 2.31, !- Conductivity {W/m-K} + 2322, !- Density {kg/m3} + 832; !- Specific Heat {J/kg-K} + + Material, + 100mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B + MediumRough, !- Roughness + 0.1016, !- Thickness {m} + 2.31, !- Conductivity {W/m-K} + 2322, !- Density {kg/m3} + 832; !- Specific Heat {J/kg-K} + + Material, + 150mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B + MediumRough, !- Roughness + 0.1524, !- Thickness {m} + 2.31, !- Conductivity {W/m-K} + 2322, !- Density {kg/m3} + 832; !- Specific Heat {J/kg-K} + + Material, + 200mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B + MediumRough, !- Roughness + 0.2032, !- Thickness {m} + 2.31, !- Conductivity {W/m-K} + 2322, !- Density {kg/m3} + 832; !- Specific Heat {J/kg-K} + + Material, + M10 200mm concrete block wall, !- Name + MediumRough, !- Roughness + 0.2032, !- Thickness {m} + 0.72, !- Conductivity {W/m-K} + 800, !- Density {kg/m3} + 832; !- Specific Heat {J/kg-K} + + Material, + M10 200mm concrete block basement wall, !- Name + MediumRough, !- Roughness + 0.2032, !- Thickness {m} + 1.326, !- Conductivity {W/m-K} + 1842, !- Density {kg/m3} + 912; !- Specific Heat {J/kg-K} + + + + + + + + Material:NoMass, + CP02 CARPET PAD, !- Name + VeryRough, !- Roughness + 0.21648, !- Thermal Resistance {m2-K/W} + 0.9, !- Thermal Absorptance + 0.7, !- Solar Absorptance + 0.8; !- Visible Absorptance + + + Material:NoMass, + Air_Wall_Material, !- Name + Rough, !- Roughness + 0.2079491, !- Thermal Resistance {m2-K/W} + 0.9, !- Thermal Absorptance + 0.7; !- Solar Absorptance + + + Material:NoMass, + Nonres_Roof_Insulation, !- Name + MediumSmooth, !- Roughness + 8.09838681889561, + !- Thermal Resistance {m2-K/W} + 0.9, !- Absorptance:Thermal + 0.7, !- Absorptance:Solar + 0.7; !- Absorptance:Visible + + Material:NoMass, + Res_Roof_Insulation, !- Name + MediumSmooth, !- Roughness + 0.0299387330245182, + !- Thermal Resistance {m2-K/W} + 0.9, !- Thermal Absorptance + 0.7, !- Solar Absorptance + 0.7; !- Visible Absorptance + + Material:NoMass, + Semiheated_Roof_Insulation, !- Name + MediumSmooth, !- Roughness + 0.0299387330245182, + !- Thermal Resistance {m2-K/W} + 0.9, !- Thermal Absorptance + 0.7, !- Solar Absorptance + 0.7; !- Visible Absorptance + + + + Material:NoMass, + Nonres_Exterior_Wall_Insulation, !- Name + MediumSmooth, !- Roughness + 3.06941962105791, + !- Thermal Resistance {m2-K/W} + 0.9, !- Thermal Absorptance + 0.7, !- Solar Absorptance + 0.7; !- Visible Absorptance + + Material:NoMass, + Res_Exterior_Wall_Insulation, !- Name + MediumSmooth, !- Roughness + 0.0299387330245182, + !- Thermal Resistance {m2-K/W} + 0.9, !- Thermal Absorptance + 0.7, !- Solar Absorptance + 0.7; !- Visible Absorptance + + Material:NoMass, + Semiheated_Exterior_Wall_Insulation, !- Name + MediumSmooth, !- Roughness + 0.0299387330245182, + !- Thermal Resistance {m2-K/W} + 0.9, !- Thermal Absorptance + 0.7, !- Solar Absorptance + 0.7; !- Visible Absorptance + + + + Material:NoMass, + Nonres_Floor_Insulation, !- Name + MediumSmooth, !- Roughness + + 0.0299387330245182, + !- Thermal Resistance {m2-K/W} + 0.9, !- Thermal Absorptance + 0.7, !- Solar Absorptance + 0.7; !- Visible Absorptance + + Material:NoMass, + Res_Floor_Insulation, !- Name + MediumSmooth, !- Roughness + + 0.0299387330245182, + !- Thermal Resistance {m2-K/W} + 0.9, !- Thermal Absorptance + 0.7, !- Solar Absorptance + 0.7; !- Visible Absorptance + + Material:NoMass, + Semiheated_Floor_Insulation, !- Name + MediumSmooth, !- Roughness + + 0.0299387330245182, + !- Thermal Resistance {m2-K/W} + 0.9, !- Thermal Absorptance + 0.7, !- Solar Absorptance + 0.7; !- Visible Absorptance + + + + + + + Material:NoMass, + Std Opaque Door Panel, !- Name + MediumRough, !- Roughness + 0.123456790123457, !- (corresponds to default RSI-0.12327 or R-0.7) Thermal Resistance {m2-K/W} + 0.9, !- Thermal Absorptance + 0.7, !- Solar Absorptance + 0.7; !- Visible Absorptance + +!- =========== ALL OBJECTS IN CLASS: CONSTRUCTION =========== + + Construction, + InteriorFurnishings, !- Name + Std Wood 6inch; !- Outside Layer + + Construction, + Air_Wall, !- Name + Air_Wall_Material; !- Outside Layer + + Construction, + DropCeiling, !- Name + AC02 Acoustic Ceiling; !- Outside Layer + + Construction, + OpaqueDoor, !- Name + Std Opaque Door Panel; !- Outside Layer + + Construction, + AtticRoofDeck, !- Name + F12 Asphalt shingles, !- Outside Layer + G02 16mm plywood; !- Layer 2 + + Construction, + int_wall, !- Name + G01 13mm gypsum board, !- Outside Layer + G01 13mm gypsum board; !- Layer 2 + + Construction, + ext_slab_8in_with_carpet,!- Name + 200mm Normalweight concrete floor, !- Outside Layer + CP02 CARPET PAD; !- Layer 2 + + Construction, + ext_slab_8in, !- Name + 200mm Normalweight concrete floor; !- Outside Layer + + Construction, + ext_slab_6in_with_carpet,!- Name + 150mm Normalweight concrete floor, !- Outside Layer + CP02 CARPET PAD; !- Layer 2 + + Construction, + ext_slab_6in, !- Name + 150mm Normalweight concrete floor; !- Outside Layer + + Construction, + int_slab_floor, !- Name + 100mm Normalweight concrete floor, !- Outside Layer + CP02 CARPET PAD; !- Layer 2 + + Construction, + int_slab_ceiling, !- Name + CP02 CARPET PAD, !- Outside Layer + 100mm Normalweight concrete floor; !- Layer 2 + + Construction, + basement_wall, !- Name + M10 200mm concrete block basement wall; !- Outside Layer + + Construction, + int_wood_floor, !- Name + AC02 Acoustic Ceiling, !- Outside Layer + G02 16mm plywood, !- Layer 2 + CP02 CARPET PAD; !- Layer 3 + + Construction, + ext_soffit_floor, !- Name + G02 16mm plywood; !- Outside Layer + + Construction, + nonres_roof, !- Name + Nonres_Roof_Insulation, !- Outside Layer + G01 16mm gypsum board; !- Layer #2 + + + Construction, + res_roof, !- Name + Res_Roof_Insulation, !- Outside Layer + G01 16mm gypsum board; !- Layer #2 + + + Construction, + semiheated_roof, !- Name + Semiheated_Roof_Insulation, !- Outside Layer + G01 16mm gypsum board; !- Layer #2 + + + Construction, + nonres_roof_floor, !- Name - Other side zone surface definition for nonres_roof + G01 16mm gypsum board, !- Outside Layer + Nonres_Roof_Insulation; !- Layer #2 + + Construction, + res_roof_floor, !- Name - Other side zone surface definition for res_roof + G01 16mm gypsum board, !- Outside Layer + Res_Roof_Insulation; !- Layer #2 + + Construction, + semiheated_roof_floor, !- Name - Other side zone surface definition for semiheated_roof + G01 16mm gypsum board, !- Outside Layer + Semiheated_Roof_Insulation; !- Layer #2 + + + + Construction, + nonres_ext_wall, !- Name + F07 25mm stucco, !- Outside Layer + G01 16mm gypsum board, !- Layer #2 + Nonres_Exterior_Wall_Insulation, !- Layer #3 + G01 16mm gypsum board; !- Layer #4 + + + Construction, + res_ext_wall, !- Name + F07 25mm stucco, !- Outside Layer + G01 16mm gypsum board, !- Layer #1 + Res_Exterior_Wall_Insulation, !- Layer #2 + G01 16mm gypsum board; !- Layer #3 + + + Construction, + semiheated_ext_wall, !- Name + F07 25mm stucco, !- Outside Layer + G01 16mm gypsum board, !- Layer #1 + Semiheated_Exterior_Wall_Insulation, !- Layer #2 + G01 16mm gypsum board; !- Layer #3 + + + Construction, + nonres_floor, !- Name + Nonres_Floor_Insulation, !- Outside Layer + 100mm Normalweight concrete floor, !- Layer #1 + CP02 CARPET PAD; !- Layer #2 + + + Construction, + res_floor, !- Name + Res_Floor_Insulation, !- Outside Layer + 100mm Normalweight concrete floor, !- Layer #1 + CP02 CARPET PAD; !- Layer #2 + + + Construction, + semiheated_floor, !- Name + Semiheated_Floor_Insulation, !- Outside Layer + 100mm Normalweight concrete floor, !- Layer #1 + CP02 CARPET PAD; !- Layer #2 + + + Construction, + nonres_floor_ceiling, !- Name - reverse ordered layers for nonres_floor + CP02 CARPET PAD, !- Outside Layer + 100mm Normalweight concrete floor, !- Layer #1 + Nonres_Floor_Insulation; !- Layer #2 + + Construction, + res_floor_ceiling, !- Name - reverse ordered layers for res_floor + CP02 CARPET PAD, !- Outside Layer + 100mm Normalweight concrete floor, !- Layer #1 + Res_Floor_Insulation; !- Layer #2 + + Construction, + semiheated_floor_ceiling, !- Name - reverse ordered layers for semiheated_floor + CP02 CARPET PAD, !- Outside Layer + 100mm Normalweight concrete floor, !- Layer #1 + Semiheated_Floor_Insulation; !- Layer #2 + + + + + + + +!- =========== ALL OBJECTS IN CLASS: WINDOWMATERIAL:SIMPLEGLAZINGSYSTEM =========== + +WindowMaterial:SimpleGlazingSystem, + Glazing Layer, !- Name + 2.0441736, !- U-Factor {W/m2-K} + 0.38, !- Solar Heat Gain Coefficient + 0.418; !- Visible Transmittance +Construction, + Window_U_0.36_SHGC_0.38, !- Name + Glazing Layer; !- Outside Layer +!- =========== ALL OBJECTS IN CLASS: GLOBALGEOMETRYRULES =========== + + GlobalGeometryRules, + UpperLeftCorner, !- Starting Vertex Position + Counterclockwise, !- Vertex Entry Direction + Relative, !- Coordinate System + Relative; !- Daylighting Reference Point Coordinate System + + + + Construction:FfactorGroundFloor, + Core_ZN_floor_Ffactor, !- Name + 0.90012, !- F-Factor + 149.65740000000005, !- Area + 0; !- PerimeterExposed + + Construction:FfactorGroundFloor, + Perimeter_ZN_1_floor_Ffactor, !- Name + 0.90012, !- F-Factor + 113.45000000000002, !- Area + 27.69; !- PerimeterExposed + + Construction:FfactorGroundFloor, + Perimeter_ZN_2_floor_Ffactor, !- Name + 0.90012, !- F-Factor + 67.29999999999995, !- Area + 18.46; !- PerimeterExposed + + Construction:FfactorGroundFloor, + Perimeter_ZN_3_floor_Ffactor, !- Name + 0.90012, !- F-Factor + 113.44999999999999, !- Area + 27.69; !- PerimeterExposed + + Construction:FfactorGroundFloor, + Perimeter_ZN_4_floor_Ffactor, !- Name + 0.90012, !- F-Factor + 67.30000000000001, !- Area + 18.46; !- PerimeterExposed + + + + +!- =========== ALL OBJECTS IN CLASS: ZONE =========== + + Zone, + Core_ZN, !- Name + 0.0000, !- Direction of Relative North {deg} + 0.0000, !- X Origin {m} + 0.0000, !- Y Origin {m} + 0.0000, !- Z Origin {m} + 1, !- Type + 1.0000, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + Yes; !- Part of Total Floor Area + + Zone, + Perimeter_ZN_1, !- Name + 0.0000, !- Direction of Relative North {deg} + 0.0000, !- X Origin {m} + 0.0000, !- Y Origin {m} + 0.0000, !- Z Origin {m} + 1, !- Type + 1.0000, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + Yes; !- Part of Total Floor Area + + Zone, + Perimeter_ZN_2, !- Name + 0.0000, !- Direction of Relative North {deg} + 0.0000, !- X Origin {m} + 0.0000, !- Y Origin {m} + 0.0000, !- Z Origin {m} + 1, !- Type + 1.0000, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + Yes; !- Part of Total Floor Area + + Zone, + Perimeter_ZN_3, !- Name + 0.0000, !- Direction of Relative North {deg} + 0.0000, !- X Origin {m} + 0.0000, !- Y Origin {m} + 0.0000, !- Z Origin {m} + 1, !- Type + 1.0000, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + Yes; !- Part of Total Floor Area + + Zone, + Perimeter_ZN_4, !- Name + 0.0000, !- Direction of Relative North {deg} + 0.0000, !- X Origin {m} + 0.0000, !- Y Origin {m} + 0.0000, !- Z Origin {m} + 1, !- Type + 1.0000, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + Yes; !- Part of Total Floor Area + + Zone, + Attic, !- Name + 0.0000, !- Direction of Relative North {deg} + 0.0000, !- X Origin {m} + 0.0000, !- Y Origin {m} + 0.0000, !- Z Origin {m} + 1, !- Type + 1.0000, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + No; !- Part of Total Floor Area + +!- =========== ALL OBJECTS IN CLASS: BUILDINGSURFACE:DETAILED =========== + + BuildingSurface:Detailed, + Core_ZN_floor, !- Name + Floor, !- Surface Type + Core_ZN_floor_Ffactor, !- Construction Name + Core_ZN, !- Zone Name + Adiabatic, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 5.0000,13.4600,0.0000, !- X,Y,Z ==> Vertex 1 {m} + 22.6900,13.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 22.6900,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 5.0000,5.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Core_ZN_wall_south, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Core_ZN, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_ZN_1_wall_north, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 5.0000,5.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 5.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 22.6900,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 22.6900,5.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Core_ZN_wall_east, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Core_ZN, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_ZN_2_wall_west,!- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 22.6900,5.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 22.6900,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 22.6900,13.4600,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 22.6900,13.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Core_ZN_wall_north, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Core_ZN, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_ZN_3_wall_south, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 22.6900,13.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 22.6900,13.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 5.0000,13.4600,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 5.0000,13.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Core_ZN_ceiling, !- Name + Ceiling, !- Surface Type + nonres_roof, !- Construction Name + Core_ZN, !- Zone Name + Surface, !- Outside Boundary Condition + Attic_floor_core, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 22.6900,13.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 5.0000,13.4600,3.0500, !- X,Y,Z ==> Vertex 2 {m} + 5.0000,5.0000,3.0500, !- X,Y,Z ==> Vertex 3 {m} + 22.6900,5.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Core_ZN_wall_west, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Core_ZN, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_ZN_4_wall_east,!- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 5.0000,13.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 5.0000,13.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 5.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 5.0000,5.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Perimeter_ZN_1_floor, !- Name + Floor, !- Surface Type + Perimeter_ZN_1_floor_Ffactor, !- Construction Name + Perimeter_ZN_1, !- Zone Name + GroundFCfactorMethod, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 27.6900,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} + 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 5.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 22.6900,5.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Perimeter_ZN_1_wall_west,!- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_ZN_1, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_ZN_4_wall_south, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 5.0000,5.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 5.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 0.0000,0.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Perimeter_ZN_1_wall_south, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + Perimeter_ZN_1, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.0000,0.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 27.6900,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 27.6900,0.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Perimeter_ZN_1_ceiling, !- Name + Ceiling, !- Surface Type + nonres_roof, !- Construction Name + Perimeter_ZN_1, !- Zone Name + Surface, !- Outside Boundary Condition + Attic_floor_perimeter_south, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.0000,0.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 27.6900,0.0000,3.0500, !- X,Y,Z ==> Vertex 2 {m} + 22.6900,5.0000,3.0500, !- X,Y,Z ==> Vertex 3 {m} + 5.0000,5.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Perimeter_ZN_1_wall_east,!- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_ZN_1, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_ZN_2_wall_south, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 27.6900,0.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 27.6900,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 22.6900,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 22.6900,5.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Perimeter_ZN_1_wall_north, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_ZN_1, !- Zone Name + Surface, !- Outside Boundary Condition + Core_ZN_wall_south, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 22.6900,5.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 22.6900,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 5.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 5.0000,5.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Perimeter_ZN_2_floor, !- Name + Floor, !- Surface Type + Perimeter_ZN_2_floor_Ffactor, !- Construction Name + Perimeter_ZN_2, !- Zone Name + GroundFCfactorMethod, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 22.6900,13.4600,0.0000, !- X,Y,Z ==> Vertex 1 {m} + 27.6900,18.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 27.6900,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 22.6900,5.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Perimeter_ZN_2_wall_east,!- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + Perimeter_ZN_2, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 27.6900,0.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 27.6900,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 27.6900,18.4600,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 27.6900,18.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Perimeter_ZN_2_wall_north, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_ZN_2, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_ZN_3_wall_east,!- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 27.6900,18.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 27.6900,18.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 22.6900,13.4600,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 22.6900,13.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Perimeter_ZN_2_ceiling, !- Name + Ceiling, !- Surface Type + nonres_roof, !- Construction Name + Perimeter_ZN_2, !- Zone Name + Surface, !- Outside Boundary Condition + Attic_floor_perimeter_east, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 27.6900,18.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 22.6900,13.4600,3.0500, !- X,Y,Z ==> Vertex 2 {m} + 22.6900,5.0000,3.0500, !- X,Y,Z ==> Vertex 3 {m} + 27.6900,0.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Perimeter_ZN_2_wall_south, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_ZN_2, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_ZN_1_wall_east,!- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 22.6900,5.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 22.6900,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 27.6900,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 27.6900,0.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Perimeter_ZN_2_wall_west,!- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_ZN_2, !- Zone Name + Surface, !- Outside Boundary Condition + Core_ZN_wall_east, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 22.6900,13.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 22.6900,13.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 22.6900,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 22.6900,5.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Perimeter_ZN_3_floor, !- Name + Floor, !- Surface Type + Perimeter_ZN_3_floor_Ffactor, !- Construction Name + Perimeter_ZN_3, !- Zone Name + GroundFCfactorMethod, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 5.0000,13.4600,0.0000, !- X,Y,Z ==> Vertex 1 {m} + 0.0000,18.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 27.6900,18.4600,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 22.6900,13.4600,0.0000; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Perimeter_ZN_3_wall_south, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_ZN_3, !- Zone Name + Surface, !- Outside Boundary Condition + Core_ZN_wall_north, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 5.0000,13.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 5.0000,13.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 22.6900,13.4600,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 22.6900,13.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Perimeter_ZN_3_wall_west,!- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_ZN_3, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_ZN_4_wall_north, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.0000,18.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 0.0000,18.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 5.0000,13.4600,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 5.0000,13.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Perimeter_ZN_3_ceiling, !- Name + Ceiling, !- Surface Type + nonres_roof, !- Construction Name + Perimeter_ZN_3, !- Zone Name + Surface, !- Outside Boundary Condition + Attic_floor_perimeter_north, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.0000,18.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 5.0000,13.4600,3.0500, !- X,Y,Z ==> Vertex 2 {m} + 22.6900,13.4600,3.0500, !- X,Y,Z ==> Vertex 3 {m} + 27.6900,18.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Perimeter_ZN_3_wall_north, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + Perimeter_ZN_3, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 27.6900,18.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 27.6900,18.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 0.0000,18.4600,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 0.0000,18.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Perimeter_ZN_3_wall_east,!- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_ZN_3, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_ZN_2_wall_north, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 22.6900,13.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 22.6900,13.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 27.6900,18.4600,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 27.6900,18.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Perimeter_ZN_4_floor, !- Name + Floor, !- Surface Type + Perimeter_ZN_4_floor_Ffactor, !- Construction Name + Perimeter_ZN_4, !- Zone Name + GroundFCfactorMethod, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 5.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} + 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 0.0000,18.4600,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 5.0000,13.4600,0.0000; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Perimeter_ZN_4_wall_south, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_ZN_4, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_ZN_1_wall_west,!- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.0000,0.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 5.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 5.0000,5.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Perimeter_ZN_4_ceiling, !- Name + Ceiling, !- Surface Type + nonres_roof, !- Construction Name + Perimeter_ZN_4, !- Zone Name + Surface, !- Outside Boundary Condition + Attic_floor_perimeter_west, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.0000,0.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 5.0000,5.0000,3.0500, !- X,Y,Z ==> Vertex 2 {m} + 5.0000,13.4600,3.0500, !- X,Y,Z ==> Vertex 3 {m} + 0.0000,18.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Perimeter_ZN_4_wall_north, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_ZN_4, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_ZN_3_wall_west,!- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 5.0000,13.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 5.0000,13.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 0.0000,18.4600,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 0.0000,18.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Perimeter_ZN_4_wall_east,!- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_ZN_4, !- Zone Name + Surface, !- Outside Boundary Condition + Core_ZN_wall_west, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 5.0000,5.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 5.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 5.0000,13.4600,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 5.0000,13.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Perimeter_ZN_4_wall_west,!- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + Perimeter_ZN_4, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.0000,18.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 0.0000,18.4600,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 0.0000,0.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Attic_soffit_west, !- Name + Floor, !- Surface Type + ext_soffit_floor, !- Construction Name + Attic, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + WindExposed, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + -0.6000,19.0600,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 0.0000,18.4600,3.0500, !- X,Y,Z ==> Vertex 2 {m} + 0.0000,0.0000,3.0500, !- X,Y,Z ==> Vertex 3 {m} + -0.6000,-0.6000,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Attic_soffit_south, !- Name + Floor, !- Surface Type + ext_soffit_floor, !- Construction Name + Attic, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + WindExposed, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.0000,0.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 27.6900,0.0000,3.0500, !- X,Y,Z ==> Vertex 2 {m} + 28.2900,-0.6000,3.0500, !- X,Y,Z ==> Vertex 3 {m} + -0.6000,-0.6000,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Attic_soffit_east, !- Name + Floor, !- Surface Type + ext_soffit_floor, !- Construction Name + Attic, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + WindExposed, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 28.2900,19.0600,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 28.2900,-0.6000,3.0500, !- X,Y,Z ==> Vertex 2 {m} + 27.6900,0.0000,3.0500, !- X,Y,Z ==> Vertex 3 {m} + 27.6900,18.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Attic_floor_perimeter_south, !- Name + Floor, !- Surface Type + nonres_roof_floor, !- Construction Name + Attic, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_ZN_1_ceiling, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.0000,0.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 5.0000,5.0000,3.0500, !- X,Y,Z ==> Vertex 2 {m} + 22.6900,5.0000,3.0500, !- X,Y,Z ==> Vertex 3 {m} + 27.6900,0.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Attic_floor_perimeter_west, !- Name + Floor, !- Surface Type + nonres_roof_floor, !- Construction Name + Attic, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_ZN_4_ceiling, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 5.0000,13.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 5.0000,5.0000,3.0500, !- X,Y,Z ==> Vertex 2 {m} + 0.0000,0.0000,3.0500, !- X,Y,Z ==> Vertex 3 {m} + 0.0000,18.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Attic_floor_perimeter_east, !- Name + Floor, !- Surface Type + nonres_roof_floor, !- Construction Name + Attic, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_ZN_2_ceiling, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 22.6900,5.0000,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 22.6900,13.4600,3.0500, !- X,Y,Z ==> Vertex 2 {m} + 27.6900,18.4600,3.0500, !- X,Y,Z ==> Vertex 3 {m} + 27.6900,0.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Attic_floor_core, !- Name + Floor, !- Surface Type + nonres_roof_floor, !- Construction Name + Attic, !- Zone Name + Surface, !- Outside Boundary Condition + Core_ZN_ceiling, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 5.0000,13.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 22.6900,13.4600,3.0500, !- X,Y,Z ==> Vertex 2 {m} + 22.6900,5.0000,3.0500, !- X,Y,Z ==> Vertex 3 {m} + 5.0000,5.0000,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Attic_floor_perimeter_north, !- Name + Floor, !- Surface Type + nonres_roof_floor, !- Construction Name + Attic, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_ZN_3_ceiling, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.0000,18.4600,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 27.6900,18.4600,3.0500, !- X,Y,Z ==> Vertex 2 {m} + 22.6900,13.4600,3.0500, !- X,Y,Z ==> Vertex 3 {m} + 5.0000,13.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Attic_soffit_north, !- Name + Floor, !- Surface Type + ext_soffit_floor, !- Construction Name + Attic, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + WindExposed, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + -0.6000,19.0600,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 28.2900,19.0600,3.0500, !- X,Y,Z ==> Vertex 2 {m} + 27.6900,18.4600,3.0500, !- X,Y,Z ==> Vertex 3 {m} + 0.0000,18.4600,3.0500; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Attic_roof_north, !- Name + Roof, !- Surface Type + AtticRoofDeck, !- Construction Name + Attic, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 28.2900,19.0600,3.0500, !- X,Y,Z ==> Vertex 1 {m} + -0.6000,19.0600,3.0500, !- X,Y,Z ==> Vertex 2 {m} + 9.2300,9.2300,6.3300, !- X,Y,Z ==> Vertex 3 {m} + 18.4600,9.2300,6.3300; !- X,Y,Z ==> Vertex 4 {m} + + BuildingSurface:Detailed, + Attic_roof_west, !- Name + Roof, !- Surface Type + AtticRoofDeck, !- Construction Name + Attic, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 3, !- Number of Vertices + -0.6000,19.0600,3.0500, !- X,Y,Z ==> Vertex 1 {m} + -0.6000,-0.6000,3.0500, !- X,Y,Z ==> Vertex 2 {m} + 9.2300,9.2300,6.3300; !- X,Y,Z ==> Vertex 3 {m} + + BuildingSurface:Detailed, + Attic_roof_east, !- Name + Roof, !- Surface Type + AtticRoofDeck, !- Construction Name + Attic, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 3, !- Number of Vertices + 28.2900,-0.6000,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 28.2900,19.0600,3.0500, !- X,Y,Z ==> Vertex 2 {m} + 18.4600,9.2300,6.3300; !- X,Y,Z ==> Vertex 3 {m} + + BuildingSurface:Detailed, + Attic_roof_south, !- Name + Roof, !- Surface Type + AtticRoofDeck, !- Construction Name + Attic, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + -0.6000,-0.6000,3.0500, !- X,Y,Z ==> Vertex 1 {m} + 28.2900,-0.6000,3.0500, !- X,Y,Z ==> Vertex 2 {m} + 18.4600,9.2300,6.3300, !- X,Y,Z ==> Vertex 3 {m} + 9.2300,9.2300,6.3300; !- X,Y,Z ==> Vertex 4 {m} + +!- =========== ALL OBJECTS IN CLASS: FENESTRATIONSURFACE:DETAILED =========== + + FenestrationSurface:Detailed, + Perimeter_ZN_1_wall_south_Window_1, !- Name + Window, !- Surface Type + Window_U_0.36_SHGC_0.38, !- Construction Name + Perimeter_ZN_1_wall_south, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 1.390,0.0000,2.4240, !- X,Y,Z ==> Vertex 1 {m} + 1.390,0.0000,0.9000, !- X,Y,Z ==> Vertex 2 {m} + 3.220,0.0000,0.9000, !- X,Y,Z ==> Vertex 3 {m} + 3.220,0.0000,2.4240; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_ZN_1_wall_south_Window_2, !- Name + Window, !- Surface Type + Window_U_0.36_SHGC_0.38, !- Construction Name + Perimeter_ZN_1_wall_south, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 6.010,0.0000,2.4240, !- X,Y,Z ==> Vertex 1 {m} + 6.010,0.0000,0.9000, !- X,Y,Z ==> Vertex 2 {m} + 7.840,0.0000,0.9000, !- X,Y,Z ==> Vertex 3 {m} + 7.840,0.0000,2.4240; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_ZN_1_wall_south_Window_3, !- Name + Window, !- Surface Type + Window_U_0.36_SHGC_0.38, !- Construction Name + Perimeter_ZN_1_wall_south, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 10.620,0.0000,2.4240, !- X,Y,Z ==> Vertex 1 {m} + 10.620,0.0000,0.9000, !- X,Y,Z ==> Vertex 2 {m} + 12.450,0.0000,0.9000, !- X,Y,Z ==> Vertex 3 {m} + 12.450,0.0000,2.4240; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_ZN_1_wall_south_Window_4, !- Name + Window, !- Surface Type + Window_U_0.36_SHGC_0.38, !- Construction Name + Perimeter_ZN_1_wall_south, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 15.240,0.0000,2.4240, !- X,Y,Z ==> Vertex 1 {m} + 15.240,0.0000,0.9000, !- X,Y,Z ==> Vertex 2 {m} + 17.070,0.0000,0.9000, !- X,Y,Z ==> Vertex 3 {m} + 17.070,0.0000,2.4240; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_ZN_1_wall_south_Window_5, !- Name + Window, !- Surface Type + Window_U_0.36_SHGC_0.38, !- Construction Name + Perimeter_ZN_1_wall_south, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 19.850,0.0000,2.4240, !- X,Y,Z ==> Vertex 1 {m} + 19.850,0.0000,0.9000, !- X,Y,Z ==> Vertex 2 {m} + 21.680,0.0000,0.9000, !- X,Y,Z ==> Vertex 3 {m} + 21.680,0.0000,2.4240; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_ZN_1_wall_south_Window_6, !- Name + Window, !- Surface Type + Window_U_0.36_SHGC_0.38, !- Construction Name + Perimeter_ZN_1_wall_south, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 24.470,0.0000,2.4240, !- X,Y,Z ==> Vertex 1 {m} + 24.470,0.0000,0.9000, !- X,Y,Z ==> Vertex 2 {m} + 26.300,0.0000,0.9000, !- X,Y,Z ==> Vertex 3 {m} + 26.300,0.0000,2.4240; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_ZN_1_wall_south_door, !- Name + GlassDoor, !- Surface Type + Window_U_0.36_SHGC_0.38, !- Construction Name + Perimeter_ZN_1_wall_south, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 12.930,0.0000,2.1340, !- X,Y,Z ==> Vertex 1 {m} + 12.930,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} + 14.760,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} + 14.760,0.0000,2.1340; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_ZN_2_wall_east_Window_4, !- Name + Window, !- Surface Type + Window_U_0.36_SHGC_0.38, !- Construction Name + Perimeter_ZN_2_wall_east,!- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 27.690,15.2400,2.4240, !- X,Y,Z ==> Vertex 1 {m} + 27.690,15.2400,0.9000, !- X,Y,Z ==> Vertex 2 {m} + 27.690,17.0700,0.9000, !- X,Y,Z ==> Vertex 3 {m} + 27.690,17.0700,2.4240; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_ZN_2_wall_east_Window_3, !- Name + Window, !- Surface Type + Window_U_0.36_SHGC_0.38, !- Construction Name + Perimeter_ZN_2_wall_east,!- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 27.690,10.6200,2.4240, !- X,Y,Z ==> Vertex 1 {m} + 27.690,10.6200,0.9000, !- X,Y,Z ==> Vertex 2 {m} + 27.690,12.4500,0.9000, !- X,Y,Z ==> Vertex 3 {m} + 27.690,12.4500,2.4240; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_ZN_2_wall_east_Window_2, !- Name + Window, !- Surface Type + Window_U_0.36_SHGC_0.38, !- Construction Name + Perimeter_ZN_2_wall_east,!- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 27.690,6.0100,2.4240, !- X,Y,Z ==> Vertex 1 {m} + 27.690,6.0100,0.9000, !- X,Y,Z ==> Vertex 2 {m} + 27.690,7.8400,0.9000, !- X,Y,Z ==> Vertex 3 {m} + 27.690,7.8400,2.4240; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_ZN_2_wall_east_Window_1, !- Name + Window, !- Surface Type + Window_U_0.36_SHGC_0.38, !- Construction Name + Perimeter_ZN_2_wall_east,!- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 27.690,1.3900,2.4240, !- X,Y,Z ==> Vertex 1 {m} + 27.690,1.3900,0.9000, !- X,Y,Z ==> Vertex 2 {m} + 27.690,3.2200,0.9000, !- X,Y,Z ==> Vertex 3 {m} + 27.690,3.2200,2.4240; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_ZN_3_wall_north_Window_1, !- Name + Window, !- Surface Type + Window_U_0.36_SHGC_0.38, !- Construction Name + Perimeter_ZN_3_wall_north, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 26.300,18.4600,2.4240, !- X,Y,Z ==> Vertex 1 {m} + 26.300,18.4600,0.9000, !- X,Y,Z ==> Vertex 2 {m} + 24.470,18.4600,0.9000, !- X,Y,Z ==> Vertex 3 {m} + 24.470,18.4600,2.4240; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_ZN_3_wall_north_Window_2, !- Name + Window, !- Surface Type + Window_U_0.36_SHGC_0.38, !- Construction Name + Perimeter_ZN_3_wall_north, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 21.680,18.4600,2.4240, !- X,Y,Z ==> Vertex 1 {m} + 21.680,18.4600,0.9000, !- X,Y,Z ==> Vertex 2 {m} + 19.850,18.4600,0.9000, !- X,Y,Z ==> Vertex 3 {m} + 19.850,18.4600,2.4240; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_ZN_3_wall_north_Window_3, !- Name + Window, !- Surface Type + Window_U_0.36_SHGC_0.38, !- Construction Name + Perimeter_ZN_3_wall_north, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 17.070,18.4600,2.4240, !- X,Y,Z ==> Vertex 1 {m} + 17.070,18.4600,0.9000, !- X,Y,Z ==> Vertex 2 {m} + 15.240,18.4600,0.9000, !- X,Y,Z ==> Vertex 3 {m} + 15.240,18.4600,2.4240; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_ZN_3_wall_north_Window_4, !- Name + Window, !- Surface Type + Window_U_0.36_SHGC_0.38, !- Construction Name + Perimeter_ZN_3_wall_north, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 12.450,18.4600,2.4240, !- X,Y,Z ==> Vertex 1 {m} + 12.450,18.4600,0.9000, !- X,Y,Z ==> Vertex 2 {m} + 10.620,18.4600,0.9000, !- X,Y,Z ==> Vertex 3 {m} + 10.620,18.4600,2.4240; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_ZN_3_wall_north_Window_5, !- Name + Window, !- Surface Type + Window_U_0.36_SHGC_0.38, !- Construction Name + Perimeter_ZN_3_wall_north, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 7.840,18.4600,2.4240, !- X,Y,Z ==> Vertex 1 {m} + 7.840,18.4600,0.9000, !- X,Y,Z ==> Vertex 2 {m} + 6.010,18.4600,0.9000, !- X,Y,Z ==> Vertex 3 {m} + 6.010,18.4600,2.4240; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_ZN_3_wall_north_Window_6, !- Name + Window, !- Surface Type + Window_U_0.36_SHGC_0.38, !- Construction Name + Perimeter_ZN_3_wall_north, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 3.220,18.4600,2.4240, !- X,Y,Z ==> Vertex 1 {m} + 3.220,18.4600,0.9000, !- X,Y,Z ==> Vertex 2 {m} + 1.390,18.4600,0.9000, !- X,Y,Z ==> Vertex 3 {m} + 1.390,18.4600,2.4240; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_ZN_4_wall_west_Window_4, !- Name + Window, !- Surface Type + Window_U_0.36_SHGC_0.38, !- Construction Name + Perimeter_ZN_4_wall_west,!- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 0.000,3.2200,2.4240, !- X,Y,Z ==> Vertex 1 {m} + 0.000,3.2200,0.9000, !- X,Y,Z ==> Vertex 2 {m} + 0.000,1.3900,0.9000, !- X,Y,Z ==> Vertex 3 {m} + 0.000,1.3900,2.4240; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_ZN_4_wall_west_Window_3, !- Name + Window, !- Surface Type + Window_U_0.36_SHGC_0.38, !- Construction Name + Perimeter_ZN_4_wall_west,!- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 0.000,7.8400,2.4240, !- X,Y,Z ==> Vertex 1 {m} + 0.000,7.8400,0.9000, !- X,Y,Z ==> Vertex 2 {m} + 0.000,6.0100,0.9000, !- X,Y,Z ==> Vertex 3 {m} + 0.000,6.0100,2.4240; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_ZN_4_wall_west_Window_2, !- Name + Window, !- Surface Type + Window_U_0.36_SHGC_0.38, !- Construction Name + Perimeter_ZN_4_wall_west,!- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 0.000,12.4500,2.4240, !- X,Y,Z ==> Vertex 1 {m} + 0.000,12.4500,0.9000, !- X,Y,Z ==> Vertex 2 {m} + 0.000,10.6200,0.9000, !- X,Y,Z ==> Vertex 3 {m} + 0.000,10.6200,2.4240; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_ZN_4_wall_west_Window_1, !- Name + Window, !- Surface Type + Window_U_0.36_SHGC_0.38, !- Construction Name + Perimeter_ZN_4_wall_west,!- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 0.000,17.0700,2.4240, !- X,Y,Z ==> Vertex 1 {m} + 0.000,17.0700,0.9000, !- X,Y,Z ==> Vertex 2 {m} + 0.000,15.2400,0.9000, !- X,Y,Z ==> Vertex 3 {m} + 0.000,15.2400,2.4240; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_ZN_3_wall_north_Door1, !- Name + Door, !- Surface Type + Swinging Door_con, !- Construction Name + Perimeter_ZN_3_wall_north, !- Building Surface Name + , !- Outside Boundary Condition Object + autocalculate, !- View Factor to Ground + , !- Frame and Divider Name + 1, !- Multiplier + 4, !- Number of Vertices + 14.911800279714,18.460000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} + 14.911800279714,18.460000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 13.997400279714,18.460000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 13.997400279714,18.460000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_ZN_3_wall_north_Door2, !- Name + Door, !- Surface Type + Swinging Door_con, !- Construction Name + Perimeter_ZN_3_wall_north, !- Building Surface Name + , !- Outside Boundary Condition Object + autocalculate, !- View Factor to Ground + , !- Frame and Divider Name + 1, !- Multiplier + 4, !- Number of Vertices + 19.131920148775,18.460000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} + 19.131920148775,18.460000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 18.217520148775,18.460000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 18.217520148775,18.460000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} + +!- =========== ALL OBJECTS IN CLASS: INTERNALMASS =========== + + InternalMass, + Core_ZN_InternalMass_1, !- Name + InteriorFurnishings, !- Construction Name + Core_ZN, !- Zone Name + 299.3148; !- Surface Area {m2} + + InternalMass, + Perimeter_ZN_1_InternalMass_1, !- Name + InteriorFurnishings, !- Construction Name + Perimeter_ZN_1, !- Zone Name + 226.9000; !- Surface Area {m2} + + InternalMass, + Perimeter_ZN_2_InternalMass_1, !- Name + InteriorFurnishings, !- Construction Name + Perimeter_ZN_2, !- Zone Name + 134.6000; !- Surface Area {m2} + + InternalMass, + Perimeter_ZN_3_InternalMass_1, !- Name + InteriorFurnishings, !- Construction Name + Perimeter_ZN_3, !- Zone Name + 226.9000; !- Surface Area {m2} + + InternalMass, + Perimeter_ZN_4_InternalMass_1, !- Name + InteriorFurnishings, !- Construction Name + Perimeter_ZN_4, !- Zone Name + 134.6000; !- Surface Area {m2} + +!- =========== ALL OBJECTS IN CLASS: PEOPLE =========== + + People, + Core_ZN, !- Name + Core_ZN, !- Zone or ZoneList Name + BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name + Area/Person, !- Number of People Calculation Method + , !- Number of People + , !- People per Zone Floor Area {person/m2} + 16.5880764430522, !- Zone Floor Area per Person {m2/person} + 0.3000, !- Fraction Radiant + AUTOCALCULATE, !- Sensible Heat Fraction + ACTIVITY_SCH, !- Activity Level Schedule Name + , !- Carbon Dioxide Generation Rate {m3/s-W} + No, !- Enable ASHRAE 55 Comfort Warnings + ZoneAveraged; !- Mean Radiant Temperature Calculation Type + + People, + Perimeter_ZN_1, !- Name + Perimeter_ZN_1, !- Zone or ZoneList Name + BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name + Area/Person, !- Number of People Calculation Method + , !- Number of People + , !- People per Zone Floor Area {person/m2} + 16.5880764430522, !- Zone Floor Area per Person {m2/person} + 0.3000, !- Fraction Radiant + AUTOCALCULATE, !- Sensible Heat Fraction + ACTIVITY_SCH, !- Activity Level Schedule Name + , !- Carbon Dioxide Generation Rate {m3/s-W} + No, !- Enable ASHRAE 55 Comfort Warnings + ZoneAveraged; !- Mean Radiant Temperature Calculation Type + + People, + Perimeter_ZN_2, !- Name + Perimeter_ZN_2, !- Zone or ZoneList Name + BLDG_OCC_SCH_w_SB, !- Number of People Schedule Name + Area/Person, !- Number of People Calculation Method + , !- Number of People + , !- People per Zone Floor Area {person/m2} + 16.5880764430522, !- Zone Floor Area per Person {m2/person} + 0.3000, !- Fraction Radiant + AUTOCALCULATE, !- Sensible Heat Fraction + ACTIVITY_SCH, !- Activity Level Schedule Name + , !- Carbon Dioxide Generation Rate {m3/s-W} + No, !- Enable ASHRAE 55 Comfort Warnings + ZoneAveraged; !- Mean Radiant Temperature Calculation Type + + People, + Perimeter_ZN_3, !- Name + Perimeter_ZN_3, !- Zone or ZoneList Name + BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name + Area/Person, !- Number of People Calculation Method + , !- Number of People + , !- People per Zone Floor Area {person/m2} + 16.5880764430522, !- Zone Floor Area per Person {m2/person} + 0.3000, !- Fraction Radiant + AUTOCALCULATE, !- Sensible Heat Fraction + ACTIVITY_SCH, !- Activity Level Schedule Name + , !- Carbon Dioxide Generation Rate {m3/s-W} + No, !- Enable ASHRAE 55 Comfort Warnings + ZoneAveraged; !- Mean Radiant Temperature Calculation Type + + People, + Perimeter_ZN_4, !- Name + Perimeter_ZN_4, !- Zone or ZoneList Name + BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name + Area/Person, !- Number of People Calculation Method + , !- Number of People + , !- People per Zone Floor Area {person/m2} + 16.5880764430522, !- Zone Floor Area per Person {m2/person} + 0.3000, !- Fraction Radiant + AUTOCALCULATE, !- Sensible Heat Fraction + ACTIVITY_SCH, !- Activity Level Schedule Name + , !- Carbon Dioxide Generation Rate {m3/s-W} + No, !- Enable ASHRAE 55 Comfort Warnings + ZoneAveraged; !- Mean Radiant Temperature Calculation Type + +!- =========== ALL OBJECTS IN CLASS: LIGHTS =========== + + Lights, + Core_ZN_Lights, !- Name + Core_ZN, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 6.888902667, !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + LightsWired, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + + Lights, + Perimeter_ZN_1_Lights, !- Name + Perimeter_ZN_1, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 6.888902667, !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + LightsWired, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + + Lights, + Perimeter_ZN_2_Lights, !- Name + Perimeter_ZN_2, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 6.888902667, !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + LightsWired, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + + Lights, + Perimeter_ZN_3_Lights, !- Name + Perimeter_ZN_3, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 6.888902667, !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + LightsWired, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + + Lights, + Perimeter_ZN_4_Lights, !- Name + Perimeter_ZN_4, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 6.888902667, !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + LightsWired, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + +!- =========== ALL OBJECTS IN CLASS: ELECTRICEQUIPMENT =========== + + ElectricEquipment, + Core_ZN_MiscPlug_Equip, !- Name + Core_ZN, !- Zone or ZoneList Name + BLDG_EQUIP_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Design Level {W} + 6.78, !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + , !- Fraction Latent + , !- Fraction Radiant + , !- Fraction Lost + MiscPlug; !- End-Use Subcategory + + ElectricEquipment, + Perimeter_ZN_1_MiscPlug_Equip, !- Name + Perimeter_ZN_1, !- Zone or ZoneList Name + BLDG_EQUIP_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Design Level {W} + 6.78, !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + , !- Fraction Latent + , !- Fraction Radiant + , !- Fraction Lost + MiscPlug; !- End-Use Subcategory + + ElectricEquipment, + Perimeter_ZN_2_MiscPlug_Equip, !- Name + Perimeter_ZN_2, !- Zone or ZoneList Name + BLDG_EQUIP_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Design Level {W} + 6.78, !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + , !- Fraction Latent + , !- Fraction Radiant + , !- Fraction Lost + MiscPlug; !- End-Use Subcategory + + ElectricEquipment, + Perimeter_ZN_3_MiscPlug_Equip, !- Name + Perimeter_ZN_3, !- Zone or ZoneList Name + BLDG_EQUIP_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Design Level {W} + 6.78, !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + , !- Fraction Latent + , !- Fraction Radiant + , !- Fraction Lost + MiscPlug; !- End-Use Subcategory + + ElectricEquipment, + Perimeter_ZN_4_MiscPlug_Equip, !- Name + Perimeter_ZN_4, !- Zone or ZoneList Name + BLDG_EQUIP_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Design Level {W} + 6.78, !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + , !- Fraction Latent + , !- Fraction Radiant + , !- Fraction Lost + MiscPlug; !- End-Use Subcategory + +!- =========== ALL OBJECTS IN CLASS: DAYLIGHTING:CONTROLS =========== + + Daylighting:Controls, + Perimeter_ZN_1_DaylCtrl, !- Name + Perimeter_ZN_1, !- Zone Name + SplitFlux, !- Daylighting Method + , !- Availability Schedule Name + Continuousoff, !- Lighting Control Type + 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control + 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control + 3, !- Number of Stepped Control Steps + 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control + Perimeter_ZN_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name + 180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} + 22.0, !- Maximum Allowable Discomfort Glare Index + , !- DElight Gridding Resolution {m2} + Perimeter_ZN_1_DaylRefPt1, !- Daylighting Reference Point 1 Name + 0.2399, !- Fraction of Zone Controlled by Reference Point 1 + 377, !- Illuminance Setpoint at Reference Point 1 {lux} + Perimeter_ZN_1_DaylRefPt2, !- Daylighting Reference Point 2 Name + 0.0302, !- Fraction of Zone Controlled by Reference Point 2 + 377; !- Illuminance Setpoint at Reference Point 2 {lux} + + Daylighting:ReferencePoint, + Perimeter_ZN_1_DaylRefPt1, !- Name + Perimeter_ZN_1, !- Zone Name + 9.144000, !- X-Coordinate of Reference Point {m} + 1.633700, !- Y-Coordinate of Reference Point {m} + 0.762000; !- Z-Coordinate of Reference Point {m} + + Daylighting:ReferencePoint, + Perimeter_ZN_1_DaylRefPt2, !- Name + Perimeter_ZN_1, !- Zone Name + 9.144000, !- X-Coordinate of Reference Point {m} + 3.267500, !- Y-Coordinate of Reference Point {m} + 0.762000; !- Z-Coordinate of Reference Point {m} + + Daylighting:Controls, + Perimeter_ZN_2_DaylCtrl, !- Name + Perimeter_ZN_2, !- Zone Name + SplitFlux, !- Daylighting Method + , !- Availability Schedule Name + Continuousoff, !- Lighting Control Type + 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control + 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control + 3, !- Number of Stepped Control Steps + 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control + Perimeter_ZN_2_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name + 90.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} + 22.0, !- Maximum Allowable Discomfort Glare Index + , !- DElight Gridding Resolution {m2} + Perimeter_ZN_2_DaylRefPt1, !- Daylighting Reference Point 1 Name + 0.2399, !- Fraction of Zone Controlled by Reference Point 1 + 377, !- Illuminance Setpoint at Reference Point 1 {lux} + Perimeter_ZN_2_DaylRefPt2, !- Daylighting Reference Point 2 Name + 0.0302, !- Fraction of Zone Controlled by Reference Point 2 + 377; !- Illuminance Setpoint at Reference Point 2 {lux} + + Daylighting:ReferencePoint, + Perimeter_ZN_2_DaylRefPt1, !- Name + Perimeter_ZN_2, !- Zone Name + 26.089800, !- X-Coordinate of Reference Point {m} + 9.144000, !- Y-Coordinate of Reference Point {m} + 0.762000; !- Z-Coordinate of Reference Point {m} + + Daylighting:ReferencePoint, + Perimeter_ZN_2_DaylRefPt2, !- Name + Perimeter_ZN_2, !- Zone Name + 24.456100, !- X-Coordinate of Reference Point {m} + 9.144000, !- Y-Coordinate of Reference Point {m} + 0.762000; !- Z-Coordinate of Reference Point {m} + + Daylighting:Controls, + Perimeter_ZN_3_DaylCtrl, !- Name + Perimeter_ZN_3, !- Zone Name + SplitFlux, !- Daylighting Method + , !- Availability Schedule Name + Continuousoff, !- Lighting Control Type + 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control + 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control + 3, !- Number of Stepped Control Steps + 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control + Perimeter_ZN_3_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name + 0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} + 22.0, !- Maximum Allowable Discomfort Glare Index + , !- DElight Gridding Resolution {m2} + Perimeter_ZN_3_DaylRefPt1, !- Daylighting Reference Point 1 Name + 0.2399, !- Fraction of Zone Controlled by Reference Point 1 + 377, !- Illuminance Setpoint at Reference Point 1 {lux} + Perimeter_ZN_3_DaylRefPt2, !- Daylighting Reference Point 2 Name + 0.0302, !- Fraction of Zone Controlled by Reference Point 2 + 377; !- Illuminance Setpoint at Reference Point 2 {lux} + + Daylighting:ReferencePoint, + Perimeter_ZN_3_DaylRefPt1, !- Name + Perimeter_ZN_3, !- Zone Name + 18.288000, !- X-Coordinate of Reference Point {m} + 16.825000, !- Y-Coordinate of Reference Point {m} + 0.762000; !- Z-Coordinate of Reference Point {m} + + Daylighting:ReferencePoint, + Perimeter_ZN_3_DaylRefPt2, !- Name + Perimeter_ZN_3, !- Zone Name + 18.288000, !- X-Coordinate of Reference Point {m} + 15.192500, !- Y-Coordinate of Reference Point {m} + 0.762000; !- Z-Coordinate of Reference Point {m} + + Daylighting:Controls, + Perimeter_ZN_4_DaylCtrl, !- Name + Perimeter_ZN_4, !- Zone Name + SplitFlux, !- Daylighting Method + , !- Availability Schedule Name + Continuousoff, !- Lighting Control Type + 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control + 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control + 3, !- Number of Stepped Control Steps + 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control + Perimeter_ZN_4_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name + 270.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} + 22.0, !- Maximum Allowable Discomfort Glare Index + , !- DElight Gridding Resolution {m2} + Perimeter_ZN_4_DaylRefPt1, !- Daylighting Reference Point 1 Name + 0.2399, !- Fraction of Zone Controlled by Reference Point 1 + 377, !- Illuminance Setpoint at Reference Point 1 {lux} + Perimeter_ZN_4_DaylRefPt2, !- Daylighting Reference Point 2 Name + 0.0302, !- Fraction of Zone Controlled by Reference Point 2 + 377; !- Illuminance Setpoint at Reference Point 2 {lux} + + Daylighting:ReferencePoint, + Perimeter_ZN_4_DaylRefPt1, !- Name + Perimeter_ZN_4, !- Zone Name + 1.633700, !- X-Coordinate of Reference Point {m} + 9.144000, !- Y-Coordinate of Reference Point {m} + 0.762000; !- Z-Coordinate of Reference Point {m} + + Daylighting:ReferencePoint, + Perimeter_ZN_4_DaylRefPt2, !- Name + Perimeter_ZN_4, !- Zone Name + 3.267500, !- X-Coordinate of Reference Point {m} + 9.144000, !- Y-Coordinate of Reference Point {m} + 0.762000; !- Z-Coordinate of Reference Point {m} + + +!- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION =========== + + ZoneInfiltration:DesignFlowRate, + Perimeter_ZN_1_Infiltration, !- Name + Perimeter_ZN_1, !- Zone or ZoneList Name + INFIL_QUARTER_ON_SCH, !- Schedule Name + Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method + 0, !- Design Flow Rate {m3/s} + , !- Flow per Zone Floor Area {m3/s-m2} + 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} + , !- Air Changes per Hour {1/hr} + 0, !- Constant Term Coefficient + 0.0000, !- Temperature Term Coefficient + 0.2240, !- Velocity Term Coefficient + 0.0000; !- Velocity Squared Term Coefficient + + ZoneInfiltration:DesignFlowRate, + Perimeter_ZN_1_Door_Infiltration, !- Name + Perimeter_ZN_1, !- Zone or ZoneList Name + INFIL_Door_Opening_SCH, !- Schedule Name + Flow/Zone, !- Design Flow Rate Calculation Method + 0.076455414, !- Design Flow Rate {m3/s} + , !- Flow per Zone Floor Area {m3/s-m2} + , !- Flow per Exterior Surface Area {m3/s-m2} + , !- Air Changes per Hour {1/hr} + 1, !- Constant Term Coefficient + 0.0000, !- Temperature Term Coefficient + 0., !- Velocity Term Coefficient + 0.0000; !- Velocity Squared Term Coefficient + + ZoneInfiltration:DesignFlowRate, + Perimeter_ZN_2_Infiltration, !- Name + Perimeter_ZN_2, !- Zone or ZoneList Name + INFIL_QUARTER_ON_SCH, !- Schedule Name + Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method + 0, !- Design Flow Rate {m3/s} + , !- Flow per Zone Floor Area {m3/s-m2} + 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} + , !- Air Changes per Hour {1/hr} + 0, !- Constant Term Coefficient + 0.0000, !- Temperature Term Coefficient + 0.2240, !- Velocity Term Coefficient + 0.0000; !- Velocity Squared Term Coefficient + + ZoneInfiltration:DesignFlowRate, + Perimeter_ZN_3_Infiltration, !- Name + Perimeter_ZN_3, !- Zone or ZoneList Name + INFIL_QUARTER_ON_SCH, !- Schedule Name + Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method + 0, !- Design Flow Rate {m3/s} + , !- Flow per Zone Floor Area {m3/s-m2} + 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} + , !- Air Changes per Hour {1/hr} + 0, !- Constant Term Coefficient + 0.0000, !- Temperature Term Coefficient + 0.2240, !- Velocity Term Coefficient + 0.0000; !- Velocity Squared Term Coefficient + + ZoneInfiltration:DesignFlowRate, + Perimeter_ZN_4_Infiltration, !- Name + Perimeter_ZN_4, !- Zone or ZoneList Name + INFIL_QUARTER_ON_SCH, !- Schedule Name + Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method + 0, !- Design Flow Rate {m3/s} + , !- Flow per Zone Floor Area {m3/s-m2} + 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} + , !- Air Changes per Hour {1/hr} + 0, !- Constant Term Coefficient + 0.0000, !- Temperature Term Coefficient + 0.2240, !- Velocity Term Coefficient + 0.0000; !- Velocity Squared Term Coefficient + + ZoneInfiltration:DesignFlowRate, + Attic_Infiltration, !- Name + Attic, !- Zone or ZoneList Name + ALWAYS_ON, !- Schedule Name + Flow/Zone, !- Design Flow Rate Calculation Method + 0.2001, !- Design Flow Rate {m3/s} + , !- Flow per Zone Floor Area {m3/s-m2} + , !- Flow per Exterior Surface Area {m3/s-m2} + , !- Air Changes per Hour {1/hr} + 1.0, !- Constant Term Coefficient + 0.0000, !- Temperature Term Coefficient + 0.0000, !- Velocity Term Coefficient + 0.0000; !- Velocity Squared Term Coefficient + +!- =========== ALL OBJECTS IN CLASS: EXTERIOR:LIGHTS =========== + +Exterior:Lights, + Exterior_Lights_a, !- Name + Exterior_lighting_schedule_a, !- Schedule Name + 50.7, !- Design Level {W} + AstronomicalClock, !- Control Option + General; !- End-Use Subcategory + +Exterior:Lights, + Exterior_Lights_b, !- Name + Exterior_lighting_schedule_b_2016, !- Schedule Name + 115.1, !- Design Level {W} + AstronomicalClock, !- Control Option + General; !- End-Use Subcategory + +Exterior:Lights, + Exterior_Lights_c, !- Name + Exterior_lighting_schedule_c_2016, !- Schedule Name + 445.5, !- Design Level {W} + AstronomicalClock, !- Control Option + General; !- End-Use Subcategory + + + + + + Schedule:Compact, + Exterior_lighting_schedule_a, !- Name + fraction, !- Schedule Type Limits Name + Through:12/31, !- Field 1 + For:AllDays, !- Field 2 + Until: 06:00,0, !- Field 3 + Until: 24:00,1; !- Field 5 + + + + Schedule:Compact, + Exterior_lighting_schedule_b, !- Name + fraction, !- Schedule Type Limits Name + Through:12/31, !- Field 1 + For:AllDays, !- Field 2 + Until: 06:00,0.7, !- Field 3 + Until: 24:00,1; !- Field 5 + + Schedule:Compact, + Exterior_lighting_schedule_a_IECC2015, !- Name + fraction, !- Schedule Type Limits Name + Through:12/31, !- Field 1 + For:Weekdays SummerDesignDay, !- Field 2 + Until: 07:00,0, !- Field 3 + Until: 19:00,1, !- Field 5 + Until: 24:00,0, !- Field 7 + For:Saturdays, !- Field 9 + Until: 24:00,0, !- Field 10 + For:AllOtherDays, !- Field 12 + Until: 24:00,0; !- Field 13 + + + + Schedule:Compact, + Exterior_lighting_schedule_b_2016, !- Name + fraction, !- Schedule Type Limits Name + Through:12/31, !- Field 1 + For:AllDays, !- Field 2 + Until: 06:00,0.5, !- Field 3 + Until: 24:00,1; !- Field 5 + + + + Schedule:Compact, + Exterior_lighting_schedule_c_2016, !- Name + fraction, !- Schedule Type Limits Name + Through:12/31, !- Field 1 + For:AllDays, !- Field 2 + Until: 06:00,0.5, !- Field 3 + Until: 19:00,1, !- Field 5 + Until: 24:00,0.5; !- Field 7 + +!- =========== ALL OBJECTS IN CLASS: SIZING:PARAMETERS =========== + + Sizing:Parameters, + 1.2000, !- Heating Sizing Factor + 1.2000, !- Cooling Sizing Factor + 6; !- Timesteps in Averaging Window + +!- =========== ALL OBJECTS IN CLASS: SIZING:ZONE =========== + + + Sizing:Zone, + Core_ZN, !- Zone or ZoneList Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40.0, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} + SZ DSOA Core_ZN, !- Design Specification Outdoor Air Object Name + , !- Zone Heating Sizing Factor + , !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0.0, !- Cooling Minimum Air Flow {m3/s} + 0.0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + , !- Heating Maximum Air Flow {m3/s} + ; !- Heating Maximum Air Flow Fraction + + DesignSpecification:OutdoorAir, + SZ DSOA Core_ZN, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s-person} + 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} + 0.0; !- Outdoor Air Flow per Zone {m3/s} + + + + Sizing:Zone, + Perimeter_ZN_1, !- Zone or ZoneList Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40.0, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} + SZ DSOA Perimeter_ZN_1, !- Design Specification Outdoor Air Object Name + , !- Zone Heating Sizing Factor + , !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0.0, !- Cooling Minimum Air Flow {m3/s} + 0.0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + , !- Heating Maximum Air Flow {m3/s} + ; !- Heating Maximum Air Flow Fraction + + DesignSpecification:OutdoorAir, + SZ DSOA Perimeter_ZN_1, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s-person} + 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} + 0.0; !- Outdoor Air Flow per Zone {m3/s} + + + + Sizing:Zone, + Perimeter_ZN_2, !- Zone or ZoneList Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40.0, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} + SZ DSOA Perimeter_ZN_2, !- Design Specification Outdoor Air Object Name + , !- Zone Heating Sizing Factor + , !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0.0, !- Cooling Minimum Air Flow {m3/s} + 0.0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + , !- Heating Maximum Air Flow {m3/s} + ; !- Heating Maximum Air Flow Fraction + + DesignSpecification:OutdoorAir, + SZ DSOA Perimeter_ZN_2, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s-person} + 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} + 0.0; !- Outdoor Air Flow per Zone {m3/s} + + + + Sizing:Zone, + Perimeter_ZN_3, !- Zone or ZoneList Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40.0, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} + SZ DSOA Perimeter_ZN_3, !- Design Specification Outdoor Air Object Name + , !- Zone Heating Sizing Factor + , !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0.0, !- Cooling Minimum Air Flow {m3/s} + 0.0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + , !- Heating Maximum Air Flow {m3/s} + ; !- Heating Maximum Air Flow Fraction + + DesignSpecification:OutdoorAir, + SZ DSOA Perimeter_ZN_3, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s-person} + 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} + 0.0; !- Outdoor Air Flow per Zone {m3/s} + + + + Sizing:Zone, + Perimeter_ZN_4, !- Zone or ZoneList Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40.0, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} + SZ DSOA Perimeter_ZN_4, !- Design Specification Outdoor Air Object Name + , !- Zone Heating Sizing Factor + , !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0.0, !- Cooling Minimum Air Flow {m3/s} + 0.0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + , !- Heating Maximum Air Flow {m3/s} + ; !- Heating Maximum Air Flow Fraction + + DesignSpecification:OutdoorAir, + SZ DSOA Perimeter_ZN_4, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s-person} + 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} + 0.0; !- Outdoor Air Flow per Zone {m3/s} + +!- =========== ALL OBJECTS IN CLASS: SIZING:SYSTEM =========== + + Sizing:System, + PSZ-AC:1, !- AirLoop Name + Sensible, !- Type of Load to Size On + AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} + 0.3000, !- Central Heating Maximum System Air Flow Ratio + 7.0, !- Preheat Design Temperature {C} + 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} + 12.8000, !- Precool Design Temperature {C} + 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} + 12.8000, !- Central Cooling Design Supply Air Temperature {C} + 40.0, !- Central Heating Design Supply Air Temperature {C} + NonCoincident, !- Type of Zone Sum to Use + No, !- 100% Outdoor Air in Cooling + No, !- 100% Outdoor Air in Heating + 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} + 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} + DesignDay, !- Cooling Supply Air Flow Rate Method + 0.0, !- Cooling Supply Air Flow Rate {m3/s} + , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} + , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate + , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} + DesignDay, !- Heating Supply Air Flow Rate Method + 0.0, !- Heating Supply Air Flow Rate {m3/s} + , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} + , !- Heating Fraction of Autosized Heating Supply Air Flow Rate + , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate + , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} + ZoneSum; !- System Outdoor Air Method + + Sizing:System, + PSZ-AC:2, !- AirLoop Name + Sensible, !- Type of Load to Size On + AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} + 0.3000, !- Central Heating Maximum System Air Flow Ratio + 7.0, !- Preheat Design Temperature {C} + 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} + 12.8000, !- Precool Design Temperature {C} + 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} + 12.8000, !- Central Cooling Design Supply Air Temperature {C} + 40.0, !- Central Heating Design Supply Air Temperature {C} + NonCoincident, !- Type of Zone Sum to Use + No, !- 100% Outdoor Air in Cooling + No, !- 100% Outdoor Air in Heating + 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} + 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} + DesignDay, !- Cooling Supply Air Flow Rate Method + 0.0, !- Cooling Supply Air Flow Rate {m3/s} + , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} + , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate + , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} + DesignDay, !- Heating Supply Air Flow Rate Method + 0.0, !- Heating Supply Air Flow Rate {m3/s} + , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} + , !- Heating Fraction of Autosized Heating Supply Air Flow Rate + , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate + , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} + ZoneSum; !- System Outdoor Air Method + + Sizing:System, + PSZ-AC:3, !- AirLoop Name + Sensible, !- Type of Load to Size On + AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} + 0.3000, !- Central Heating Maximum System Air Flow Ratio + 7.0, !- Preheat Design Temperature {C} + 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} + 12.8000, !- Precool Design Temperature {C} + 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} + 12.8000, !- Central Cooling Design Supply Air Temperature {C} + 40.0, !- Central Heating Design Supply Air Temperature {C} + NonCoincident, !- Type of Zone Sum to Use + No, !- 100% Outdoor Air in Cooling + No, !- 100% Outdoor Air in Heating + 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} + 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} + DesignDay, !- Cooling Supply Air Flow Rate Method + 0.0, !- Cooling Supply Air Flow Rate {m3/s} + , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} + , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate + , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} + DesignDay, !- Heating Supply Air Flow Rate Method + 0.0, !- Heating Supply Air Flow Rate {m3/s} + , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} + , !- Heating Fraction of Autosized Heating Supply Air Flow Rate + , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate + , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} + ZoneSum; !- System Outdoor Air Method + + Sizing:System, + PSZ-AC:4, !- AirLoop Name + Sensible, !- Type of Load to Size On + AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} + 0.3000, !- Central Heating Maximum System Air Flow Ratio + 7.0, !- Preheat Design Temperature {C} + 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} + 12.8000, !- Precool Design Temperature {C} + 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} + 12.8000, !- Central Cooling Design Supply Air Temperature {C} + 40.0, !- Central Heating Design Supply Air Temperature {C} + NonCoincident, !- Type of Zone Sum to Use + No, !- 100% Outdoor Air in Cooling + No, !- 100% Outdoor Air in Heating + 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} + 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} + DesignDay, !- Cooling Supply Air Flow Rate Method + 0.0, !- Cooling Supply Air Flow Rate {m3/s} + , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} + , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate + , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} + DesignDay, !- Heating Supply Air Flow Rate Method + 0.0, !- Heating Supply Air Flow Rate {m3/s} + , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} + , !- Heating Fraction of Autosized Heating Supply Air Flow Rate + , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate + , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} + ZoneSum; !- System Outdoor Air Method + + Sizing:System, + PSZ-AC:5, !- AirLoop Name + Sensible, !- Type of Load to Size On + AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} + 0.3000, !- Central Heating Maximum System Air Flow Ratio + 7.0, !- Preheat Design Temperature {C} + 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} + 12.8000, !- Precool Design Temperature {C} + 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} + 12.8000, !- Central Cooling Design Supply Air Temperature {C} + 40.0, !- Central Heating Design Supply Air Temperature {C} + NonCoincident, !- Type of Zone Sum to Use + No, !- 100% Outdoor Air in Cooling + No, !- 100% Outdoor Air in Heating + 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} + 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} + DesignDay, !- Cooling Supply Air Flow Rate Method + 0.0, !- Cooling Supply Air Flow Rate {m3/s} + , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} + , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate + , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} + DesignDay, !- Heating Supply Air Flow Rate Method + 0.0, !- Heating Supply Air Flow Rate {m3/s} + , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} + , !- Heating Fraction of Autosized Heating Supply Air Flow Rate + , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate + , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} + ZoneSum; !- System Outdoor Air Method + +!- =========== ALL OBJECTS IN CLASS: SIZING:PLANT =========== + + Sizing:Plant, + SHWSys1, !- Plant or Condenser Loop Name + Heating, !- Loop Type + 48.89, !- Design Loop Exit Temperature {C} + 5.0; !- Loop Design Temperature Difference {deltaC} + +!- =========== ALL OBJECTS IN CLASS: ZONECONTROL:THERMOSTAT =========== + + ZoneControl:Thermostat, + Core_ZN Thermostat, !- Name + Core_ZN, !- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + Core_ZN DualSPSched; !- Control 1 Name + + ZoneControl:Thermostat, + Perimeter_ZN_1 Thermostat, !- Name + Perimeter_ZN_1, !- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + Perimeter_ZN_1 DualSPSched; !- Control 1 Name + + ZoneControl:Thermostat, + Perimeter_ZN_2 Thermostat, !- Name + Perimeter_ZN_2, !- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + Perimeter_ZN_2 DualSPSched; !- Control 1 Name + + ZoneControl:Thermostat, + Perimeter_ZN_3 Thermostat, !- Name + Perimeter_ZN_3, !- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + Perimeter_ZN_3 DualSPSched; !- Control 1 Name + + ZoneControl:Thermostat, + Perimeter_ZN_4 Thermostat, !- Name + Perimeter_ZN_4, !- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + Perimeter_ZN_4 DualSPSched; !- Control 1 Name + +!- =========== ALL OBJECTS IN CLASS: THERMOSTATSETPOINT:DUALSETPOINT =========== + + ThermostatSetpoint:DualSetpoint, + Core_ZN DualSPSched, !- Name + HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name + CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name + + ThermostatSetpoint:DualSetpoint, + Perimeter_ZN_1 DualSPSched, !- Name + HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name + CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name + + ThermostatSetpoint:DualSetpoint, + Perimeter_ZN_2 DualSPSched, !- Name + HTGSETP_SCH_NO_OPTIMUM_w_SB, !- Heating Setpoint Temperature Schedule Name + CLGSETP_SCH_NO_OPTIMUM_w_SB; !- Cooling Setpoint Temperature Schedule Name + + ThermostatSetpoint:DualSetpoint, + Perimeter_ZN_3 DualSPSched, !- Name + HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name + CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name + + ThermostatSetpoint:DualSetpoint, + Perimeter_ZN_4 DualSPSched, !- Name + HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name + CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name + +!- =========== ALL OBJECTS IN CLASS: AIRTERMINAL:SINGLEDUCT:UNCONTROLLED =========== + + AirTerminal:SingleDuct:Uncontrolled, + Core_ZN Direct Air, !- Name + ALWAYS_ON, !- Availability Schedule Name + Core_ZN Direct Air Inlet Node Name, !- Zone Supply Air Node Name + AUTOSIZE; !- Maximum Air Flow Rate {m3/s} + + AirTerminal:SingleDuct:Uncontrolled, + Perimeter_ZN_1 Direct Air, !- Name + ALWAYS_ON, !- Availability Schedule Name + Perimeter_ZN_1 Direct Air Inlet Node Name, !- Zone Supply Air Node Name + AUTOSIZE; !- Maximum Air Flow Rate {m3/s} + + AirTerminal:SingleDuct:Uncontrolled, + Perimeter_ZN_2 Direct Air, !- Name + ALWAYS_ON, !- Availability Schedule Name + Perimeter_ZN_2 Direct Air Inlet Node Name, !- Zone Supply Air Node Name + AUTOSIZE; !- Maximum Air Flow Rate {m3/s} + + AirTerminal:SingleDuct:Uncontrolled, + Perimeter_ZN_3 Direct Air, !- Name + ALWAYS_ON, !- Availability Schedule Name + Perimeter_ZN_3 Direct Air Inlet Node Name, !- Zone Supply Air Node Name + AUTOSIZE; !- Maximum Air Flow Rate {m3/s} + + AirTerminal:SingleDuct:Uncontrolled, + Perimeter_ZN_4 Direct Air, !- Name + ALWAYS_ON, !- Availability Schedule Name + Perimeter_ZN_4 Direct Air Inlet Node Name, !- Zone Supply Air Node Name + AUTOSIZE; !- Maximum Air Flow Rate {m3/s} + +!- =========== ALL OBJECTS IN CLASS: ZONEHVAC:EQUIPMENTLIST =========== + + ZoneHVAC:EquipmentList, + Core_ZN Equipment, !- Name + SequentialLoad, !- Load Distribution Scheme + AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type + Core_ZN Direct Air, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + + ZoneHVAC:EquipmentList, + Perimeter_ZN_1 Equipment,!- Name + SequentialLoad, !- Load Distribution Scheme + AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type + Perimeter_ZN_1 Direct Air, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + + ZoneHVAC:EquipmentList, + Perimeter_ZN_2 Equipment,!- Name + SequentialLoad, !- Load Distribution Scheme + AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type + Perimeter_ZN_2 Direct Air, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + + ZoneHVAC:EquipmentList, + Perimeter_ZN_3 Equipment,!- Name + SequentialLoad, !- Load Distribution Scheme + AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type + Perimeter_ZN_3 Direct Air, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + + ZoneHVAC:EquipmentList, + Perimeter_ZN_4 Equipment,!- Name + SequentialLoad, !- Load Distribution Scheme + AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type + Perimeter_ZN_4 Direct Air, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + +!- =========== ALL OBJECTS IN CLASS: ZONEHVAC:EQUIPMENTCONNECTIONS =========== + + ZoneHVAC:EquipmentConnections, + Core_ZN, !- Zone Name + Core_ZN Equipment, !- Zone Conditioning Equipment List Name + Core_ZN Inlet Nodes, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + Core_ZN Air Node, !- Zone Air Node Name + Core_ZN Return Air Node Name; !- Zone Return Air Node or NodeList Name + + ZoneHVAC:EquipmentConnections, + Perimeter_ZN_1, !- Zone Name + Perimeter_ZN_1 Equipment,!- Zone Conditioning Equipment List Name + Perimeter_ZN_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + Perimeter_ZN_1 Air Node, !- Zone Air Node Name + Perimeter_ZN_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name + + ZoneHVAC:EquipmentConnections, + Perimeter_ZN_2, !- Zone Name + Perimeter_ZN_2 Equipment,!- Zone Conditioning Equipment List Name + Perimeter_ZN_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + Perimeter_ZN_2 Air Node, !- Zone Air Node Name + Perimeter_ZN_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name + + ZoneHVAC:EquipmentConnections, + Perimeter_ZN_3, !- Zone Name + Perimeter_ZN_3 Equipment,!- Zone Conditioning Equipment List Name + Perimeter_ZN_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + Perimeter_ZN_3 Air Node, !- Zone Air Node Name + Perimeter_ZN_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name + + ZoneHVAC:EquipmentConnections, + Perimeter_ZN_4, !- Zone Name + Perimeter_ZN_4 Equipment,!- Zone Conditioning Equipment List Name + Perimeter_ZN_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + Perimeter_ZN_4 Air Node, !- Zone Air Node Name + Perimeter_ZN_4 Return Air Node Name; !- Zone Return Air Node or NodeList Name + +!- =========== ALL OBJECTS IN CLASS: FAN:CONSTANTVOLUME =========== + + Fan:OnOff, + PSZ-AC:1 Fan, !- Name + HVACOperationSchd, !- Availability Schedule Name +0.55575, !- Fan Total Efficiency +622.5, !- Pressure Rise {Pa} + AUTOSIZE, !- Maximum Flow Rate {m3/s} +0.855, !- Motor Efficiency + 1.0, !- Motor In Airstream Fraction + PSZ-AC:1_OA-PSZ-AC:1_FanNode, !- Air Inlet Node Name + PSZ-AC:1_Fan-PSZ-AC:1_CoolCNode, !- Air Outlet Node Name + , !- Fan Power Ratio Function of Speed Ratio Curve Name + , !- Fan Efficiency Ratio Function of Speed Ratio Curve Name + General; !- End-Use Subcategory + + Fan:OnOff, + PSZ-AC:2 Fan, !- Name + HVACOperationSchd, !- Availability Schedule Name +0.55575, !- Fan Total Efficiency +622.5, !- Pressure Rise {Pa} + AUTOSIZE, !- Maximum Flow Rate {m3/s} +0.855, !- Motor Efficiency + 1.0, !- Motor In Airstream Fraction + PSZ-AC:2_OA-PSZ-AC:2_FanNode, !- Air Inlet Node Name + PSZ-AC:2_Fan-PSZ-AC:2_CoolCNode, !- Air Outlet Node Name + , !- Fan Power Ratio Function of Speed Ratio Curve Name + , !- Fan Efficiency Ratio Function of Speed Ratio Curve Name + General; !- End-Use Subcategory + + Fan:OnOff, + PSZ-AC:3 Fan, !- Name + HVACOperationSchd, !- Availability Schedule Name +0.55575, !- Fan Total Efficiency +622.5, !- Pressure Rise {Pa} + AUTOSIZE, !- Maximum Flow Rate {m3/s} +0.855, !- Motor Efficiency + 1.0, !- Motor In Airstream Fraction + PSZ-AC:3_OA-PSZ-AC:3_FanNode, !- Air Inlet Node Name + PSZ-AC:3_Fan-PSZ-AC:3_CoolCNode, !- Air Outlet Node Name + , !- Fan Power Ratio Function of Speed Ratio Curve Name + , !- Fan Efficiency Ratio Function of Speed Ratio Curve Name + General; !- End-Use Subcategory + + Fan:OnOff, + PSZ-AC:4 Fan, !- Name + HVACOperationSchd, !- Availability Schedule Name +0.55575, !- Fan Total Efficiency +622.5, !- Pressure Rise {Pa} + AUTOSIZE, !- Maximum Flow Rate {m3/s} +0.855, !- Motor Efficiency + 1.0, !- Motor In Airstream Fraction + PSZ-AC:4_OA-PSZ-AC:4_FanNode, !- Air Inlet Node Name + PSZ-AC:4_Fan-PSZ-AC:4_CoolCNode, !- Air Outlet Node Name + , !- Fan Power Ratio Function of Speed Ratio Curve Name + , !- Fan Efficiency Ratio Function of Speed Ratio Curve Name + General; !- End-Use Subcategory + + Fan:OnOff, + PSZ-AC:5 Fan, !- Name + HVACOperationSchd, !- Availability Schedule Name +0.55575, !- Fan Total Efficiency +622.5, !- Pressure Rise {Pa} + AUTOSIZE, !- Maximum Flow Rate {m3/s} +0.855, !- Motor Efficiency + 1.0, !- Motor In Airstream Fraction + PSZ-AC:5_OA-PSZ-AC:5_FanNode, !- Air Inlet Node Name + PSZ-AC:5_Fan-PSZ-AC:5_CoolCNode, !- Air Outlet Node Name + , !- Fan Power Ratio Function of Speed Ratio Curve Name + , !- Fan Efficiency Ratio Function of Speed Ratio Curve Name + General; !- End-Use Subcategory + +!- =========== ALL OBJECTS IN CLASS: COIL:COOLING:DX:SINGLESPEED =========== + + Coil:Cooling:DX:SingleSpeed, + PSZ-AC:1 Heat Pump DX Cooling Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- Gross Rated Total Cooling Capacity {W} + AUTOSIZE, !- Gross Rated Sensible Heat Ratio +4.11713235489972, !- Gross Rated Cooling COP {W/W} + AUTOSIZE, !- Rated Air Flow Rate {m3/s} + , !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} + PSZ-AC:1_Fan-PSZ-AC:1_CoolCNode, !- Air Inlet Node Name + PSZ-AC:1_CoolC-PSZ-AC:1_HeatCNode, !- Air Outlet Node Name + HPACCoolCapFT, !- Total Cooling Capacity Function of Temperature Curve Name + HPACCoolCapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name + HPACCOOLEIRFT, !- Energy Input Ratio Function of Temperature Curve Name + HPACCOOLEIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name + HPACCOOLPLFFPLR, !- Part Load Fraction Correlation Curve Name + ; !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} + + Coil:Cooling:DX:SingleSpeed, + PSZ-AC:2 Heat Pump DX Cooling Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- Gross Rated Total Cooling Capacity {W} + AUTOSIZE, !- Gross Rated Sensible Heat Ratio +4.11713235489972, !- Gross Rated Cooling COP {W/W} + AUTOSIZE, !- Rated Air Flow Rate {m3/s} + , !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} + PSZ-AC:2_Fan-PSZ-AC:2_CoolCNode, !- Air Inlet Node Name + PSZ-AC:2_CoolC-PSZ-AC:2_HeatCNode, !- Air Outlet Node Name + HPACCoolCapFT, !- Total Cooling Capacity Function of Temperature Curve Name + HPACCoolCapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name + HPACCOOLEIRFT, !- Energy Input Ratio Function of Temperature Curve Name + HPACCOOLEIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name + HPACCOOLPLFFPLR, !- Part Load Fraction Correlation Curve Name + ; !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} + + Coil:Cooling:DX:SingleSpeed, + PSZ-AC:3 Heat Pump DX Cooling Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- Gross Rated Total Cooling Capacity {W} + AUTOSIZE, !- Gross Rated Sensible Heat Ratio +4.11713235489972, !- Gross Rated Cooling COP {W/W} + AUTOSIZE, !- Rated Air Flow Rate {m3/s} + , !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} + PSZ-AC:3_Fan-PSZ-AC:3_CoolCNode, !- Air Inlet Node Name + PSZ-AC:3_CoolC-PSZ-AC:3_HeatCNode, !- Air Outlet Node Name + HPACCoolCapFT, !- Total Cooling Capacity Function of Temperature Curve Name + HPACCoolCapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name + HPACCOOLEIRFT, !- Energy Input Ratio Function of Temperature Curve Name + HPACCOOLEIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name + HPACCOOLPLFFPLR, !- Part Load Fraction Correlation Curve Name + ; !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} + + Coil:Cooling:DX:SingleSpeed, + PSZ-AC:4 Heat Pump DX Cooling Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- Gross Rated Total Cooling Capacity {W} + AUTOSIZE, !- Gross Rated Sensible Heat Ratio +4.11713235489972, !- Gross Rated Cooling COP {W/W} + AUTOSIZE, !- Rated Air Flow Rate {m3/s} + , !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} + PSZ-AC:4_Fan-PSZ-AC:4_CoolCNode, !- Air Inlet Node Name + PSZ-AC:4_CoolC-PSZ-AC:4_HeatCNode, !- Air Outlet Node Name + HPACCoolCapFT, !- Total Cooling Capacity Function of Temperature Curve Name + HPACCoolCapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name + HPACCOOLEIRFT, !- Energy Input Ratio Function of Temperature Curve Name + HPACCOOLEIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name + HPACCOOLPLFFPLR, !- Part Load Fraction Correlation Curve Name + ; !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} + + Coil:Cooling:DX:SingleSpeed, + PSZ-AC:5 Heat Pump DX Cooling Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- Gross Rated Total Cooling Capacity {W} + AUTOSIZE, !- Gross Rated Sensible Heat Ratio +4.11713235489972, !- Gross Rated Cooling COP {W/W} + AUTOSIZE, !- Rated Air Flow Rate {m3/s} + , !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} + PSZ-AC:5_Fan-PSZ-AC:5_CoolCNode, !- Air Inlet Node Name + PSZ-AC:5_CoolC-PSZ-AC:5_HeatCNode, !- Air Outlet Node Name + HPACCoolCapFT, !- Total Cooling Capacity Function of Temperature Curve Name + HPACCoolCapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name + HPACCOOLEIRFT, !- Energy Input Ratio Function of Temperature Curve Name + HPACCOOLEIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name + HPACCOOLPLFFPLR, !- Part Load Fraction Correlation Curve Name + ; !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} + +!- =========== ALL OBJECTS IN CLASS: COIL:HEATING:DX:SINGLESPEED =========== + + Coil:Heating:DX:SingleSpeed, + PSZ-AC:1 Heat Pump DX Heating Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- Gross Rated Heating Capacity {W} +3.3592, !- Gross Rated Heating COP {W/W} + AUTOSIZE, !- Rated Air Flow Rate {m3/s} + , !- Rated Supply Fan Power Per Volume Flow Rate {W/(m3/s)} + PSZ-AC:1_CoolC-PSZ-AC:1_HeatCNode, !- Air Inlet Node Name + PSZ-AC:1_HeatC-PSZ-AC:1_SuppHeatingNode, !- Air Outlet Node Name + HPACHeatCapFT, !- Heating Capacity Function of Temperature Curve Name + HPACHeatCapFFF, !- Heating Capacity Function of Flow Fraction Curve Name + HPACHeatEIRFT, !- Energy Input Ratio Function of Temperature Curve Name + HPACHeatEIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name + HPACCOOLPLFFPLR, !- Part Load Fraction Correlation Curve Name + HPACCOOLEIRFT, !- Defrost Energy Input Ratio Function of Temperature Curve Name + -12.2, !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} + , !- Outdoor Dry-Bulb Temperature to Turn On Compressor {C} + 1.67, !- Maximum Outdoor Dry-Bulb Temperature for Defrost Operation {C} + 50.0, !- Crankcase Heater Capacity {W} + 4.4, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C} + ReverseCycle, !- Defrost Strategy + OnDemand, !- Defrost Control + , !- Defrost Time Period Fraction + AUTOSIZE; !- Resistive Defrost Heater Capacity {W} + + Coil:Heating:DX:SingleSpeed, + PSZ-AC:2 Heat Pump DX Heating Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- Gross Rated Heating Capacity {W} +3.3592, !- Gross Rated Heating COP {W/W} + AUTOSIZE, !- Rated Air Flow Rate {m3/s} + , !- Rated Supply Fan Power Per Volume Flow Rate {W/(m3/s)} + PSZ-AC:2_CoolC-PSZ-AC:2_HeatCNode, !- Air Inlet Node Name + PSZ-AC:2_HeatC-PSZ-AC:2_SuppHeatingNode, !- Air Outlet Node Name + HPACHeatCapFT, !- Heating Capacity Function of Temperature Curve Name + HPACHeatCapFFF, !- Heating Capacity Function of Flow Fraction Curve Name + HPACHeatEIRFT, !- Energy Input Ratio Function of Temperature Curve Name + HPACHeatEIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name + HPACCOOLPLFFPLR, !- Part Load Fraction Correlation Curve Name + HPACCOOLEIRFT, !- Defrost Energy Input Ratio Function of Temperature Curve Name + -12.2, !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} + , !- Outdoor Dry-Bulb Temperature to Turn On Compressor {C} + 1.67, !- Maximum Outdoor Dry-Bulb Temperature for Defrost Operation {C} + 50.0, !- Crankcase Heater Capacity {W} + 4.4, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C} + ReverseCycle, !- Defrost Strategy + OnDemand, !- Defrost Control + , !- Defrost Time Period Fraction + AUTOSIZE; !- Resistive Defrost Heater Capacity {W} + + Coil:Heating:DX:SingleSpeed, + PSZ-AC:3 Heat Pump DX Heating Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- Gross Rated Heating Capacity {W} +3.3592, !- Gross Rated Heating COP {W/W} + AUTOSIZE, !- Rated Air Flow Rate {m3/s} + , !- Rated Supply Fan Power Per Volume Flow Rate {W/(m3/s)} + PSZ-AC:3_CoolC-PSZ-AC:3_HeatCNode, !- Air Inlet Node Name + PSZ-AC:3_HeatC-PSZ-AC:3_SuppHeatingNode, !- Air Outlet Node Name + HPACHeatCapFT, !- Heating Capacity Function of Temperature Curve Name + HPACHeatCapFFF, !- Heating Capacity Function of Flow Fraction Curve Name + HPACHeatEIRFT, !- Energy Input Ratio Function of Temperature Curve Name + HPACHeatEIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name + HPACCOOLPLFFPLR, !- Part Load Fraction Correlation Curve Name + HPACCOOLEIRFT, !- Defrost Energy Input Ratio Function of Temperature Curve Name + -12.2, !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} + , !- Outdoor Dry-Bulb Temperature to Turn On Compressor {C} + 1.67, !- Maximum Outdoor Dry-Bulb Temperature for Defrost Operation {C} + 50.0, !- Crankcase Heater Capacity {W} + 4.4, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C} + ReverseCycle, !- Defrost Strategy + OnDemand, !- Defrost Control + , !- Defrost Time Period Fraction + AUTOSIZE; !- Resistive Defrost Heater Capacity {W} + + Coil:Heating:DX:SingleSpeed, + PSZ-AC:4 Heat Pump DX Heating Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- Gross Rated Heating Capacity {W} +3.3592, !- Gross Rated Heating COP {W/W} + AUTOSIZE, !- Rated Air Flow Rate {m3/s} + , !- Rated Supply Fan Power Per Volume Flow Rate {W/(m3/s)} + PSZ-AC:4_CoolC-PSZ-AC:4_HeatCNode, !- Air Inlet Node Name + PSZ-AC:4_HeatC-PSZ-AC:4_SuppHeatingNode, !- Air Outlet Node Name + HPACHeatCapFT, !- Heating Capacity Function of Temperature Curve Name + HPACHeatCapFFF, !- Heating Capacity Function of Flow Fraction Curve Name + HPACHeatEIRFT, !- Energy Input Ratio Function of Temperature Curve Name + HPACHeatEIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name + HPACCOOLPLFFPLR, !- Part Load Fraction Correlation Curve Name + HPACCOOLEIRFT, !- Defrost Energy Input Ratio Function of Temperature Curve Name + -12.2, !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} + , !- Outdoor Dry-Bulb Temperature to Turn On Compressor {C} + 1.67, !- Maximum Outdoor Dry-Bulb Temperature for Defrost Operation {C} + 50.0, !- Crankcase Heater Capacity {W} + 4.4, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C} + ReverseCycle, !- Defrost Strategy + OnDemand, !- Defrost Control + , !- Defrost Time Period Fraction + AUTOSIZE; !- Resistive Defrost Heater Capacity {W} + + Coil:Heating:DX:SingleSpeed, + PSZ-AC:5 Heat Pump DX Heating Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- Gross Rated Heating Capacity {W} +3.3592, !- Gross Rated Heating COP {W/W} + AUTOSIZE, !- Rated Air Flow Rate {m3/s} + , !- Rated Supply Fan Power Per Volume Flow Rate {W/(m3/s)} + PSZ-AC:5_CoolC-PSZ-AC:5_HeatCNode, !- Air Inlet Node Name + PSZ-AC:5_HeatC-PSZ-AC:5_SuppHeatingNode, !- Air Outlet Node Name + HPACHeatCapFT, !- Heating Capacity Function of Temperature Curve Name + HPACHeatCapFFF, !- Heating Capacity Function of Flow Fraction Curve Name + HPACHeatEIRFT, !- Energy Input Ratio Function of Temperature Curve Name + HPACHeatEIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name + HPACCOOLPLFFPLR, !- Part Load Fraction Correlation Curve Name + HPACCOOLEIRFT, !- Defrost Energy Input Ratio Function of Temperature Curve Name + -12.2, !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} + , !- Outdoor Dry-Bulb Temperature to Turn On Compressor {C} + 1.67, !- Maximum Outdoor Dry-Bulb Temperature for Defrost Operation {C} + 50.0, !- Crankcase Heater Capacity {W} + 4.4, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C} + ReverseCycle, !- Defrost Strategy + OnDemand, !- Defrost Control + , !- Defrost Time Period Fraction + AUTOSIZE; !- Resistive Defrost Heater Capacity {W} + +!- =========== ALL OBJECTS IN CLASS: COIL:HEATING:GAS =========== + + Coil:Heating:Fuel, + PSZ-AC:1 Heat Pump DX Supp Heating Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + NaturalGas, !- Fuel Type +0.81, !- Burner Efficiency + AUTOSIZE, !- Nominal Capacity {W} + PSZ-AC:1_HeatC-PSZ-AC:1_SuppHeatingNode, !- Air Inlet Node Name + PSZ-AC:1 Supply Equipment Outlet Node; !- Air Outlet Node Name + + Coil:Heating:Fuel, + PSZ-AC:2 Heat Pump DX Supp Heating Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + NaturalGas, !- Fuel Type +0.81, !- Burner Efficiency + AUTOSIZE, !- Nominal Capacity {W} + PSZ-AC:2_HeatC-PSZ-AC:2_SuppHeatingNode, !- Air Inlet Node Name + PSZ-AC:2 Supply Equipment Outlet Node; !- Air Outlet Node Name + + Coil:Heating:Fuel, + PSZ-AC:3 Heat Pump DX Supp Heating Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + NaturalGas, !- Fuel Type +0.81, !- Burner Efficiency + AUTOSIZE, !- Nominal Capacity {W} + PSZ-AC:3_HeatC-PSZ-AC:3_SuppHeatingNode, !- Air Inlet Node Name + PSZ-AC:3 Supply Equipment Outlet Node; !- Air Outlet Node Name + + Coil:Heating:Fuel, + PSZ-AC:4 Heat Pump DX Supp Heating Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + NaturalGas, !- Fuel Type +0.81, !- Burner Efficiency + AUTOSIZE, !- Nominal Capacity {W} + PSZ-AC:4_HeatC-PSZ-AC:4_SuppHeatingNode, !- Air Inlet Node Name + PSZ-AC:4 Supply Equipment Outlet Node; !- Air Outlet Node Name + + Coil:Heating:Fuel, + PSZ-AC:5 Heat Pump DX Supp Heating Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + NaturalGas, !- Fuel Type +0.81, !- Burner Efficiency + AUTOSIZE, !- Nominal Capacity {W} + PSZ-AC:5_HeatC-PSZ-AC:5_SuppHeatingNode, !- Air Inlet Node Name + PSZ-AC:5 Supply Equipment Outlet Node; !- Air Outlet Node Name + +!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:UNITARYCOOLONLY =========== + + AirLoopHVAC:UnitaryHeatPump:AirToAir, + PSZ-AC:1_HeatPump, !- Name + ALWAYS_ON, !- Availability Schedule Name + PSZ-AC:1_OA-PSZ-AC:1_FanNode, !- Air Inlet Node Name + PSZ-AC:1 Supply Equipment Outlet Node, !- Air Outlet Node Name + AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s} + AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s} + AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s} + Core_ZN, !- Controlling Zone or Thermostat Location + Fan:OnOff, !- Supply Air Fan Object Type + PSZ-AC:1 Fan, !- Supply Air Fan Name + Coil:Heating:DX:SingleSpeed, !- Heating Coil Object Type + PSZ-AC:1 Heat Pump DX Heating Coil, !- Heating Coil Name + Coil:Cooling:DX:SingleSpeed, !- Cooling Coil Object Type + PSZ-AC:1 Heat Pump DX Cooling Coil, !- Cooling Coil Name + Coil:Heating:Fuel, !- Supplemental Heating Coil Object Type + PSZ-AC:1 Heat Pump DX Supp Heating Coil, !- Supplemental Heating Coil Name + AUTOSIZE, !- Maximum Supply Air Temperature from Supplemental Heater {C} + 4.44, !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C} + BlowThrough, !- Fan Placement + HVACOperationSchd; !- Supply Air Fan Operating Mode Schedule Name + + AirLoopHVAC:UnitaryHeatPump:AirToAir, + PSZ-AC:2_HeatPump, !- Name + ALWAYS_ON, !- Availability Schedule Name + PSZ-AC:2_OA-PSZ-AC:2_FanNode, !- Air Inlet Node Name + PSZ-AC:2 Supply Equipment Outlet Node, !- Air Outlet Node Name + AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s} + AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s} + AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s} + Perimeter_ZN_1, !- Controlling Zone or Thermostat Location + Fan:OnOff, !- Supply Air Fan Object Type + PSZ-AC:2 Fan, !- Supply Air Fan Name + Coil:Heating:DX:SingleSpeed, !- Heating Coil Object Type + PSZ-AC:2 Heat Pump DX Heating Coil, !- Heating Coil Name + Coil:Cooling:DX:SingleSpeed, !- Cooling Coil Object Type + PSZ-AC:2 Heat Pump DX Cooling Coil, !- Cooling Coil Name + Coil:Heating:Fuel, !- Supplemental Heating Coil Object Type + PSZ-AC:2 Heat Pump DX Supp Heating Coil, !- Supplemental Heating Coil Name + AUTOSIZE, !- Maximum Supply Air Temperature from Supplemental Heater {C} + 4.44, !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C} + BlowThrough, !- Fan Placement + HVACOperationSchd; !- Supply Air Fan Operating Mode Schedule Name + + AirLoopHVAC:UnitaryHeatPump:AirToAir, + PSZ-AC:3_HeatPump, !- Name + ALWAYS_ON, !- Availability Schedule Name + PSZ-AC:3_OA-PSZ-AC:3_FanNode, !- Air Inlet Node Name + PSZ-AC:3 Supply Equipment Outlet Node, !- Air Outlet Node Name + AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s} + AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s} + AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s} + Perimeter_ZN_2, !- Controlling Zone or Thermostat Location + Fan:OnOff, !- Supply Air Fan Object Type + PSZ-AC:3 Fan, !- Supply Air Fan Name + Coil:Heating:DX:SingleSpeed, !- Heating Coil Object Type + PSZ-AC:3 Heat Pump DX Heating Coil, !- Heating Coil Name + Coil:Cooling:DX:SingleSpeed, !- Cooling Coil Object Type + PSZ-AC:3 Heat Pump DX Cooling Coil, !- Cooling Coil Name + Coil:Heating:Fuel, !- Supplemental Heating Coil Object Type + PSZ-AC:3 Heat Pump DX Supp Heating Coil, !- Supplemental Heating Coil Name + AUTOSIZE, !- Maximum Supply Air Temperature from Supplemental Heater {C} + 4.44, !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C} + BlowThrough, !- Fan Placement + HVACOperationSchd_w_SB; !- Supply Air Fan Operating Mode Schedule Name + + AirLoopHVAC:UnitaryHeatPump:AirToAir, + PSZ-AC:4_HeatPump, !- Name + ALWAYS_ON, !- Availability Schedule Name + PSZ-AC:4_OA-PSZ-AC:4_FanNode, !- Air Inlet Node Name + PSZ-AC:4 Supply Equipment Outlet Node, !- Air Outlet Node Name + AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s} + AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s} + AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s} + Perimeter_ZN_3, !- Controlling Zone or Thermostat Location + Fan:OnOff, !- Supply Air Fan Object Type + PSZ-AC:4 Fan, !- Supply Air Fan Name + Coil:Heating:DX:SingleSpeed, !- Heating Coil Object Type + PSZ-AC:4 Heat Pump DX Heating Coil, !- Heating Coil Name + Coil:Cooling:DX:SingleSpeed, !- Cooling Coil Object Type + PSZ-AC:4 Heat Pump DX Cooling Coil, !- Cooling Coil Name + Coil:Heating:Fuel, !- Supplemental Heating Coil Object Type + PSZ-AC:4 Heat Pump DX Supp Heating Coil, !- Supplemental Heating Coil Name + AUTOSIZE, !- Maximum Supply Air Temperature from Supplemental Heater {C} + 4.44, !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C} + BlowThrough, !- Fan Placement + HVACOperationSchd; !- Supply Air Fan Operating Mode Schedule Name + + AirLoopHVAC:UnitaryHeatPump:AirToAir, + PSZ-AC:5_HeatPump, !- Name + ALWAYS_ON, !- Availability Schedule Name + PSZ-AC:5_OA-PSZ-AC:5_FanNode, !- Air Inlet Node Name + PSZ-AC:5 Supply Equipment Outlet Node, !- Air Outlet Node Name + AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s} + AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s} + AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s} + Perimeter_ZN_4, !- Controlling Zone or Thermostat Location + Fan:OnOff, !- Supply Air Fan Object Type + PSZ-AC:5 Fan, !- Supply Air Fan Name + Coil:Heating:DX:SingleSpeed, !- Heating Coil Object Type + PSZ-AC:5 Heat Pump DX Heating Coil, !- Heating Coil Name + Coil:Cooling:DX:SingleSpeed, !- Cooling Coil Object Type + PSZ-AC:5 Heat Pump DX Cooling Coil, !- Cooling Coil Name + Coil:Heating:Fuel, !- Supplemental Heating Coil Object Type + PSZ-AC:5 Heat Pump DX Supp Heating Coil, !- Supplemental Heating Coil Name + AUTOSIZE, !- Maximum Supply Air Temperature from Supplemental Heater {C} + 4.44, !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C} + BlowThrough, !- Fan Placement + HVACOperationSchd; !- Supply Air Fan Operating Mode Schedule Name + +!- =========== ALL OBJECTS IN CLASS: CONTROLLER:OUTDOORAIR =========== + + Controller:OutdoorAir, + PSZ-AC:1_OA_Controller, !- Name + PSZ-AC:1_OARelief Node, !- Relief Air Outlet Node Name + PSZ-AC:1 Supply Equipment Inlet Node, !- Return Air Node Name + PSZ-AC:1_OA-PSZ-AC:1_FanNode, !- Mixed Air Node Name + PSZ-AC:1_OAInlet Node, !- Actuator Node Name + AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} + AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} +NoEconomizer, !- Economizer Control Type + ModulateFlow, !- Economizer Control Action Type + 28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C} + 64000.0, !- Economizer Maximum Limit Enthalpy {J/kg} + , !- Economizer Maximum Limit Dewpoint Temperature {C} + , !- Electronic Enthalpy Limit Curve Name + 0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C} + LockoutWithHeating, !- Lockout Type + FixedMinimum, !- Minimum Limit Type + MinOA_MotorizedDamper_Sched; !- Minimum Outdoor Air Schedule Name + + Controller:OutdoorAir, + PSZ-AC:2_OA_Controller, !- Name + PSZ-AC:2_OARelief Node, !- Relief Air Outlet Node Name + PSZ-AC:2 Supply Equipment Inlet Node, !- Return Air Node Name + PSZ-AC:2_OA-PSZ-AC:2_FanNode, !- Mixed Air Node Name + PSZ-AC:2_OAInlet Node, !- Actuator Node Name + AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} + AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} +NoEconomizer, !- Economizer Control Type + ModulateFlow, !- Economizer Control Action Type + 28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C} + 64000.0, !- Economizer Maximum Limit Enthalpy {J/kg} + , !- Economizer Maximum Limit Dewpoint Temperature {C} + , !- Electronic Enthalpy Limit Curve Name + 0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C} + LockoutWithHeating, !- Lockout Type + FixedMinimum, !- Minimum Limit Type + MinOA_MotorizedDamper_Sched; !- Minimum Outdoor Air Schedule Name + + Controller:OutdoorAir, + PSZ-AC:3_OA_Controller, !- Name + PSZ-AC:3_OARelief Node, !- Relief Air Outlet Node Name + PSZ-AC:3 Supply Equipment Inlet Node, !- Return Air Node Name + PSZ-AC:3_OA-PSZ-AC:3_FanNode, !- Mixed Air Node Name + PSZ-AC:3_OAInlet Node, !- Actuator Node Name + AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} + AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} +NoEconomizer, !- Economizer Control Type + ModulateFlow, !- Economizer Control Action Type + 28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C} + 64000.0, !- Economizer Maximum Limit Enthalpy {J/kg} + , !- Economizer Maximum Limit Dewpoint Temperature {C} + , !- Electronic Enthalpy Limit Curve Name + 0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C} + LockoutWithHeating, !- Lockout Type + FixedMinimum, !- Minimum Limit Type + MinOA_MotorizedDamper_Sched; !- Minimum Outdoor Air Schedule Name + + Controller:OutdoorAir, + PSZ-AC:4_OA_Controller, !- Name + PSZ-AC:4_OARelief Node, !- Relief Air Outlet Node Name + PSZ-AC:4 Supply Equipment Inlet Node, !- Return Air Node Name + PSZ-AC:4_OA-PSZ-AC:4_FanNode, !- Mixed Air Node Name + PSZ-AC:4_OAInlet Node, !- Actuator Node Name + AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} + AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} +NoEconomizer, !- Economizer Control Type + ModulateFlow, !- Economizer Control Action Type + 28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C} + 64000.0, !- Economizer Maximum Limit Enthalpy {J/kg} + , !- Economizer Maximum Limit Dewpoint Temperature {C} + , !- Electronic Enthalpy Limit Curve Name + 0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C} + LockoutWithHeating, !- Lockout Type + FixedMinimum, !- Minimum Limit Type + MinOA_MotorizedDamper_Sched; !- Minimum Outdoor Air Schedule Name + + Controller:OutdoorAir, + PSZ-AC:5_OA_Controller, !- Name + PSZ-AC:5_OARelief Node, !- Relief Air Outlet Node Name + PSZ-AC:5 Supply Equipment Inlet Node, !- Return Air Node Name + PSZ-AC:5_OA-PSZ-AC:5_FanNode, !- Mixed Air Node Name + PSZ-AC:5_OAInlet Node, !- Actuator Node Name + AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} + AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} +NoEconomizer, !- Economizer Control Type + ModulateFlow, !- Economizer Control Action Type + 28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C} + 64000.0, !- Economizer Maximum Limit Enthalpy {J/kg} + , !- Economizer Maximum Limit Dewpoint Temperature {C} + , !- Electronic Enthalpy Limit Curve Name + 0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C} + LockoutWithHeating, !- Lockout Type + FixedMinimum, !- Minimum Limit Type + MinOA_MotorizedDamper_Sched; !- Minimum Outdoor Air Schedule Name + +!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:CONTROLLERLIST =========== + + AirLoopHVAC:ControllerList, + PSZ-AC:1_OA_Controllers, !- Name + Controller:OutdoorAir, !- Controller 1 Object Type + PSZ-AC:1_OA_Controller; !- Controller 1 Name + + AirLoopHVAC:ControllerList, + PSZ-AC:2_OA_Controllers, !- Name + Controller:OutdoorAir, !- Controller 1 Object Type + PSZ-AC:2_OA_Controller; !- Controller 1 Name + + AirLoopHVAC:ControllerList, + PSZ-AC:3_OA_Controllers, !- Name + Controller:OutdoorAir, !- Controller 1 Object Type + PSZ-AC:3_OA_Controller; !- Controller 1 Name + + AirLoopHVAC:ControllerList, + PSZ-AC:4_OA_Controllers, !- Name + Controller:OutdoorAir, !- Controller 1 Object Type + PSZ-AC:4_OA_Controller; !- Controller 1 Name + + AirLoopHVAC:ControllerList, + PSZ-AC:5_OA_Controllers, !- Name + Controller:OutdoorAir, !- Controller 1 Object Type + PSZ-AC:5_OA_Controller; !- Controller 1 Name + +!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC =========== + + + AirLoopHVAC, + PSZ-AC:1, !- Name + , !- Controller List Name + PSZ-AC:1 Availability Manager List, !- Availability Manager List Name + AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} + PSZ-AC:1 Air Loop Branches, !- Branch List Name + , !- Connector List Name + PSZ-AC:1 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name + PSZ-AC:1 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name + PSZ-AC:1 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names + PSZ-AC:1 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names + + + + AirLoopHVAC, + PSZ-AC:2, !- Name + , !- Controller List Name + PSZ-AC:2 Availability Manager List, !- Availability Manager List Name + AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} + PSZ-AC:2 Air Loop Branches, !- Branch List Name + , !- Connector List Name + PSZ-AC:2 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name + PSZ-AC:2 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name + PSZ-AC:2 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names + PSZ-AC:2 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names + + + + AirLoopHVAC, + PSZ-AC:3, !- Name + , !- Controller List Name + PSZ-AC:3 Availability Manager List, !- Availability Manager List Name + AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} + PSZ-AC:3 Air Loop Branches, !- Branch List Name + , !- Connector List Name + PSZ-AC:3 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name + PSZ-AC:3 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name + PSZ-AC:3 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names + PSZ-AC:3 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names + + + + AirLoopHVAC, + PSZ-AC:4, !- Name + , !- Controller List Name + PSZ-AC:4 Availability Manager List, !- Availability Manager List Name + AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} + PSZ-AC:4 Air Loop Branches, !- Branch List Name + , !- Connector List Name + PSZ-AC:4 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name + PSZ-AC:4 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name + PSZ-AC:4 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names + PSZ-AC:4 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names + + + + AirLoopHVAC, + PSZ-AC:5, !- Name + , !- Controller List Name + PSZ-AC:5 Availability Manager List, !- Availability Manager List Name + AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} + PSZ-AC:5 Air Loop Branches, !- Branch List Name + , !- Connector List Name + PSZ-AC:5 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name + PSZ-AC:5 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name + PSZ-AC:5 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names + PSZ-AC:5 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names + +!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:OUTDOORAIRSYSTEM:EQUIPMENTLIST =========== + + AirLoopHVAC:OutdoorAirSystem:EquipmentList, + PSZ-AC:1_OA_Equipment, !- Name + OutdoorAir:Mixer, !- Component 1 Object Type + PSZ-AC:1_OAMixing Box; !- Component 1 Name + + AirLoopHVAC:OutdoorAirSystem:EquipmentList, + PSZ-AC:2_OA_Equipment, !- Name + OutdoorAir:Mixer, !- Component 1 Object Type + PSZ-AC:2_OAMixing Box; !- Component 1 Name + + AirLoopHVAC:OutdoorAirSystem:EquipmentList, + PSZ-AC:3_OA_Equipment, !- Name + OutdoorAir:Mixer, !- Component 1 Object Type + PSZ-AC:3_OAMixing Box; !- Component 1 Name + + AirLoopHVAC:OutdoorAirSystem:EquipmentList, + PSZ-AC:4_OA_Equipment, !- Name + OutdoorAir:Mixer, !- Component 1 Object Type + PSZ-AC:4_OAMixing Box; !- Component 1 Name + + AirLoopHVAC:OutdoorAirSystem:EquipmentList, + PSZ-AC:5_OA_Equipment, !- Name + OutdoorAir:Mixer, !- Component 1 Object Type + PSZ-AC:5_OAMixing Box; !- Component 1 Name + +!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:OUTDOORAIRSYSTEM =========== + + AirLoopHVAC:OutdoorAirSystem, + PSZ-AC:1_OA, !- Name + PSZ-AC:1_OA_Controllers, !- Controller List Name + PSZ-AC:1_OA_Equipment, !- Outdoor Air Equipment List Name + PSZ-AC:1 Availability Manager List; !- Availability Manager List Name + + AirLoopHVAC:OutdoorAirSystem, + PSZ-AC:2_OA, !- Name + PSZ-AC:2_OA_Controllers, !- Controller List Name + PSZ-AC:2_OA_Equipment, !- Outdoor Air Equipment List Name + PSZ-AC:2 Availability Manager List; !- Availability Manager List Name + + AirLoopHVAC:OutdoorAirSystem, + PSZ-AC:3_OA, !- Name + PSZ-AC:3_OA_Controllers, !- Controller List Name + PSZ-AC:3_OA_Equipment, !- Outdoor Air Equipment List Name + PSZ-AC:3 Availability Manager List; !- Availability Manager List Name + + AirLoopHVAC:OutdoorAirSystem, + PSZ-AC:4_OA, !- Name + PSZ-AC:4_OA_Controllers, !- Controller List Name + PSZ-AC:4_OA_Equipment, !- Outdoor Air Equipment List Name + PSZ-AC:4 Availability Manager List; !- Availability Manager List Name + + AirLoopHVAC:OutdoorAirSystem, + PSZ-AC:5_OA, !- Name + PSZ-AC:5_OA_Controllers, !- Controller List Name + PSZ-AC:5_OA_Equipment, !- Outdoor Air Equipment List Name + PSZ-AC:5 Availability Manager List; !- Availability Manager List Name + +!- =========== ALL OBJECTS IN CLASS: OUTDOORAIR:MIXER =========== + + OutdoorAir:Mixer, + PSZ-AC:1_OAMixing Box, !- Name + PSZ-AC:1_OA-PSZ-AC:1_FanNode, !- Mixed Air Node Name + PSZ-AC:1_OAInlet Node, !- Outdoor Air Stream Node Name + PSZ-AC:1_OARelief Node, !- Relief Air Stream Node Name + PSZ-AC:1 Supply Equipment Inlet Node; !- Return Air Stream Node Name + + OutdoorAir:Mixer, + PSZ-AC:2_OAMixing Box, !- Name + PSZ-AC:2_OA-PSZ-AC:2_FanNode, !- Mixed Air Node Name + PSZ-AC:2_OAInlet Node, !- Outdoor Air Stream Node Name + PSZ-AC:2_OARelief Node, !- Relief Air Stream Node Name + PSZ-AC:2 Supply Equipment Inlet Node; !- Return Air Stream Node Name + + OutdoorAir:Mixer, + PSZ-AC:3_OAMixing Box, !- Name + PSZ-AC:3_OA-PSZ-AC:3_FanNode, !- Mixed Air Node Name + PSZ-AC:3_OAInlet Node, !- Outdoor Air Stream Node Name + PSZ-AC:3_OARelief Node, !- Relief Air Stream Node Name + PSZ-AC:3 Supply Equipment Inlet Node; !- Return Air Stream Node Name + + OutdoorAir:Mixer, + PSZ-AC:4_OAMixing Box, !- Name + PSZ-AC:4_OA-PSZ-AC:4_FanNode, !- Mixed Air Node Name + PSZ-AC:4_OAInlet Node, !- Outdoor Air Stream Node Name + PSZ-AC:4_OARelief Node, !- Relief Air Stream Node Name + PSZ-AC:4 Supply Equipment Inlet Node; !- Return Air Stream Node Name + + OutdoorAir:Mixer, + PSZ-AC:5_OAMixing Box, !- Name + PSZ-AC:5_OA-PSZ-AC:5_FanNode, !- Mixed Air Node Name + PSZ-AC:5_OAInlet Node, !- Outdoor Air Stream Node Name + PSZ-AC:5_OARelief Node, !- Relief Air Stream Node Name + PSZ-AC:5 Supply Equipment Inlet Node; !- Return Air Stream Node Name + +!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:ZONESPLITTER =========== + + AirLoopHVAC:ZoneSplitter, + PSZ-AC:1 Supply Air Splitter, !- Name + PSZ-AC:1 Zone Equipment Inlet Node, !- Inlet Node Name + Core_ZN Direct Air Inlet Node Name; !- Outlet 1 Node Name + + AirLoopHVAC:ZoneSplitter, + PSZ-AC:2 Supply Air Splitter, !- Name + PSZ-AC:2 Zone Equipment Inlet Node, !- Inlet Node Name + Perimeter_ZN_1 Direct Air Inlet Node Name; !- Outlet 1 Node Name + + AirLoopHVAC:ZoneSplitter, + PSZ-AC:3 Supply Air Splitter, !- Name + PSZ-AC:3 Zone Equipment Inlet Node, !- Inlet Node Name + Perimeter_ZN_2 Direct Air Inlet Node Name; !- Outlet 1 Node Name + + AirLoopHVAC:ZoneSplitter, + PSZ-AC:4 Supply Air Splitter, !- Name + PSZ-AC:4 Zone Equipment Inlet Node, !- Inlet Node Name + Perimeter_ZN_3 Direct Air Inlet Node Name; !- Outlet 1 Node Name + + AirLoopHVAC:ZoneSplitter, + PSZ-AC:5 Supply Air Splitter, !- Name + PSZ-AC:5 Zone Equipment Inlet Node, !- Inlet Node Name + Perimeter_ZN_4 Direct Air Inlet Node Name; !- Outlet 1 Node Name + +!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:SUPPLYPATH =========== + + AirLoopHVAC:SupplyPath, + PSZ-AC:1, !- Name + PSZ-AC:1 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name + AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type + PSZ-AC:1 Supply Air Splitter; !- Component 1 Name + + AirLoopHVAC:SupplyPath, + PSZ-AC:2, !- Name + PSZ-AC:2 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name + AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type + PSZ-AC:2 Supply Air Splitter; !- Component 1 Name + + AirLoopHVAC:SupplyPath, + PSZ-AC:3, !- Name + PSZ-AC:3 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name + AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type + PSZ-AC:3 Supply Air Splitter; !- Component 1 Name + + AirLoopHVAC:SupplyPath, + PSZ-AC:4, !- Name + PSZ-AC:4 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name + AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type + PSZ-AC:4 Supply Air Splitter; !- Component 1 Name + + AirLoopHVAC:SupplyPath, + PSZ-AC:5, !- Name + PSZ-AC:5 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name + AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type + PSZ-AC:5 Supply Air Splitter; !- Component 1 Name + +!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:ZONEMIXER =========== + + AirLoopHVAC:ZoneMixer, + PSZ-AC:1 Return Air Mixer, !- Name + PSZ-AC:1 Zone Equipment Outlet Node, !- Outlet Node Name + Core_ZN Return Air Node Name; !- Inlet 1 Node Name + + AirLoopHVAC:ZoneMixer, + PSZ-AC:2 Return Air Mixer, !- Name + PSZ-AC:2 Zone Equipment Outlet Node, !- Outlet Node Name + Perimeter_ZN_1 Return Air Node Name; !- Inlet 1 Node Name + + AirLoopHVAC:ZoneMixer, + PSZ-AC:3 Return Air Mixer, !- Name + PSZ-AC:3 Zone Equipment Outlet Node, !- Outlet Node Name + Perimeter_ZN_2 Return Air Node Name; !- Inlet 1 Node Name + + AirLoopHVAC:ZoneMixer, + PSZ-AC:4 Return Air Mixer, !- Name + PSZ-AC:4 Zone Equipment Outlet Node, !- Outlet Node Name + Perimeter_ZN_3 Return Air Node Name; !- Inlet 1 Node Name + + AirLoopHVAC:ZoneMixer, + PSZ-AC:5 Return Air Mixer, !- Name + PSZ-AC:5 Zone Equipment Outlet Node, !- Outlet Node Name + Perimeter_ZN_4 Return Air Node Name; !- Inlet 1 Node Name + +!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:RETURNPATH =========== + + AirLoopHVAC:ReturnPath, + PSZ-AC:1 Return Air Path,!- Name + PSZ-AC:1 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name + AirLoopHVAC:ZoneMixer, !- Component 1 Object Type + PSZ-AC:1 Return Air Mixer; !- Component 1 Name + + AirLoopHVAC:ReturnPath, + PSZ-AC:2 Return Air Path,!- Name + PSZ-AC:2 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name + AirLoopHVAC:ZoneMixer, !- Component 1 Object Type + PSZ-AC:2 Return Air Mixer; !- Component 1 Name + + AirLoopHVAC:ReturnPath, + PSZ-AC:3 Return Air Path,!- Name + PSZ-AC:3 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name + AirLoopHVAC:ZoneMixer, !- Component 1 Object Type + PSZ-AC:3 Return Air Mixer; !- Component 1 Name + + AirLoopHVAC:ReturnPath, + PSZ-AC:4 Return Air Path,!- Name + PSZ-AC:4 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name + AirLoopHVAC:ZoneMixer, !- Component 1 Object Type + PSZ-AC:4 Return Air Mixer; !- Component 1 Name + + AirLoopHVAC:ReturnPath, + PSZ-AC:5 Return Air Path,!- Name + PSZ-AC:5 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name + AirLoopHVAC:ZoneMixer, !- Component 1 Object Type + PSZ-AC:5 Return Air Mixer; !- Component 1 Name + +!- =========== ALL OBJECTS IN CLASS: BRANCH =========== + + Branch, + PSZ-AC:1 Air Loop Main Branch, !- Name + , !- Pressure Drop Curve Name + AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type + PSZ-AC:1_OA, !- Component 1 Name + PSZ-AC:1 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name + PSZ-AC:1_OA-PSZ-AC:1_FanNode, !- Component 1 Outlet Node Name + AirLoopHVAC:UnitaryHeatPump:AirToAir, !- Component 2 Object Type + PSZ-AC:1_HeatPump, !- Component 2 Name + PSZ-AC:1_OA-PSZ-AC:1_FanNode, !- Component 2 Inlet Node Name + PSZ-AC:1 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name + + Branch, + PSZ-AC:2 Air Loop Main Branch, !- Name + , !- Pressure Drop Curve Name + AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type + PSZ-AC:2_OA, !- Component 1 Name + PSZ-AC:2 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name + PSZ-AC:2_OA-PSZ-AC:2_FanNode, !- Component 1 Outlet Node Name + AirLoopHVAC:UnitaryHeatPump:AirToAir, !- Component 2 Object Type + PSZ-AC:2_HeatPump, !- Component 2 Name + PSZ-AC:2_OA-PSZ-AC:2_FanNode, !- Component 2 Inlet Node Name + PSZ-AC:2 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name + + Branch, + PSZ-AC:3 Air Loop Main Branch, !- Name + , !- Pressure Drop Curve Name + AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type + PSZ-AC:3_OA, !- Component 1 Name + PSZ-AC:3 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name + PSZ-AC:3_OA-PSZ-AC:3_FanNode, !- Component 1 Outlet Node Name + AirLoopHVAC:UnitaryHeatPump:AirToAir, !- Component 2 Object Type + PSZ-AC:3_HeatPump, !- Component 2 Name + PSZ-AC:3_OA-PSZ-AC:3_FanNode, !- Component 2 Inlet Node Name + PSZ-AC:3 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name + + Branch, + PSZ-AC:4 Air Loop Main Branch, !- Name + , !- Pressure Drop Curve Name + AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type + PSZ-AC:4_OA, !- Component 1 Name + PSZ-AC:4 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name + PSZ-AC:4_OA-PSZ-AC:4_FanNode, !- Component 1 Outlet Node Name + AirLoopHVAC:UnitaryHeatPump:AirToAir, !- Component 2 Object Type + PSZ-AC:4_HeatPump, !- Component 2 Name + PSZ-AC:4_OA-PSZ-AC:4_FanNode, !- Component 2 Inlet Node Name + PSZ-AC:4 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name + + Branch, + PSZ-AC:5 Air Loop Main Branch, !- Name + , !- Pressure Drop Curve Name + AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type + PSZ-AC:5_OA, !- Component 1 Name + PSZ-AC:5 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name + PSZ-AC:5_OA-PSZ-AC:5_FanNode, !- Component 1 Outlet Node Name + AirLoopHVAC:UnitaryHeatPump:AirToAir, !- Component 2 Object Type + PSZ-AC:5_HeatPump, !- Component 2 Name + PSZ-AC:5_OA-PSZ-AC:5_FanNode, !- Component 2 Inlet Node Name + PSZ-AC:5 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name + + Branch, + SHWSys1 Supply Inlet Branch, !- Name + , !- Pressure Drop Curve Name + Pump:ConstantSpeed, !- Component 1 Object Type + SHWSys1 Pump, !- Component 1 Name + SHWSys1 Supply Inlet Node, !- Component 1 Inlet Node Name + SHWSys1 Pump-SHWSys1 Water HeaterNodeviaConnector; !- Component 1 Outlet Node Name + + + + Branch, + SHWSys1 Supply Equipment Branch, !- Name + , !- Pressure Drop Curve Name + WaterHeater:Mixed, !- Component 1 Object Type + SHWSys1 Water Heater, !- Component 1 Name + SHWSys1 Pump-SHWSys1 Water HeaterNode, !- Component 1 Inlet Node Name + SHWSys1 Supply Equipment Outlet Node; !- Component 1 Outlet Node Name + + Branch, + SHWSys1 Supply Equipment Bypass Branch, !- Name + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + SHWSys1 Supply Equipment Bypass Pipe, !- Component 1 Name + SHWSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name + SHWSys1 Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name + + Branch, + SHWSys1 Supply Outlet Branch, !- Name + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + SHWSys1 Supply Outlet Pipe, !- Component 1 Name + SHWSys1 Supply Mixer-SHWSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name + SHWSys1 Supply Outlet Node; !- Component 1 Outlet Node Name + + Branch, + SHWSys1 Demand Inlet Branch, !- Name + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + SHWSys1 Demand Inlet Pipe, !- Component 1 Name + SHWSys1 Demand Inlet Node, !- Component 1 Inlet Node Name + SHWSys1 Demand Inlet Pipe-SHWSys1 Demand Mixer; !- Component 1 Outlet Node Name + + Branch, + SHWSys1 Demand Load Branch 1, !- Name + , !- Pressure Drop Curve Name + WaterUse:Connections, !- Component 1 Object Type + Core_ZN Water Equipment, !- Component 1 Name + Core_ZN Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name + Core_ZN Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name + + Branch, + SHWSys1 Demand Bypass Branch, !- Name + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + SHWSys1 Demand Bypass Pipe, !- Component 1 Name + SHWSys1 Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name + SHWSys1 Demand Bypass Pipe Outlet Node; !- Component 1 Outlet Node Name + + Branch, + SHWSys1 Demand Outlet Branch, !- Name + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + SHWSys1 Demand Outlet Pipe, !- Component 1 Name + SHWSys1 Demand Mixer-SHWSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name + SHWSys1 Demand Outlet Node; !- Component 1 Outlet Node Name + +!- =========== ALL OBJECTS IN CLASS: BRANCHLIST =========== + + BranchList, + PSZ-AC:1 Air Loop Branches, !- Name + PSZ-AC:1 Air Loop Main Branch; !- Branch 1 Name + + BranchList, + PSZ-AC:2 Air Loop Branches, !- Name + PSZ-AC:2 Air Loop Main Branch; !- Branch 1 Name + + BranchList, + PSZ-AC:3 Air Loop Branches, !- Name + PSZ-AC:3 Air Loop Main Branch; !- Branch 1 Name + + BranchList, + PSZ-AC:4 Air Loop Branches, !- Name + PSZ-AC:4 Air Loop Main Branch; !- Branch 1 Name + + BranchList, + PSZ-AC:5 Air Loop Branches, !- Name + PSZ-AC:5 Air Loop Main Branch; !- Branch 1 Name + + BranchList, + SHWSys1 Supply Branches, !- Name + SHWSys1 Supply Inlet Branch, !- Branch 1 Name + SHWSys1 Supply Equipment Branch, !- Branch 2 Name + SHWSys1 Supply Equipment Bypass Branch, !- Branch 3 Name + SHWSys1 Supply Outlet Branch; !- Branch 4 Name + + BranchList, + SHWSys1 Demand Branches, !- Name + SHWSys1 Demand Inlet Branch, !- Branch 1 Name + SHWSys1 Demand Load Branch 1, !- Branch 2 Name + SHWSys1 Demand Bypass Branch, !- Branch 3 Name + SHWSys1 Demand Outlet Branch; !- Branch 4 Name + +!- =========== ALL OBJECTS IN CLASS: CONNECTOR:SPLITTER =========== + + Connector:Splitter, + SHWSys1 Supply Splitter, !- Name + SHWSys1 Supply Inlet Branch, !- Inlet Branch Name + SHWSys1 Supply Equipment Branch, !- Outlet Branch 1 Name + SHWSys1 Supply Equipment Bypass Branch; !- Outlet Branch 2 Name + + Connector:Splitter, + SHWSys1 Demand Splitter, !- Name + SHWSys1 Demand Inlet Branch, !- Inlet Branch Name + SHWSys1 Demand Load Branch 1, !- Outlet Branch 1 Name + SHWSys1 Demand Bypass Branch; !- Outlet Branch 2 Name + +!- =========== ALL OBJECTS IN CLASS: CONNECTOR:MIXER =========== + + Connector:Mixer, + SHWSys1 Supply Mixer, !- Name + SHWSys1 Supply Outlet Branch, !- Outlet Branch Name + SHWSys1 Supply Equipment Branch, !- Inlet Branch 1 Name + SHWSys1 Supply Equipment Bypass Branch; !- Inlet Branch 2 Name + + Connector:Mixer, + SHWSys1 Demand Mixer, !- Name + SHWSys1 Demand Outlet Branch, !- Outlet Branch Name + SHWSys1 Demand Load Branch 1, !- Inlet Branch 1 Name + SHWSys1 Demand Bypass Branch; !- Inlet Branch 2 Name + +!- =========== ALL OBJECTS IN CLASS: CONNECTORLIST =========== + + ConnectorList, + SHWSys1 Supply Connectors, !- Name + Connector:Splitter, !- Connector 1 Object Type + SHWSys1 Supply Splitter, !- Connector 1 Name + Connector:Mixer, !- Connector 2 Object Type + SHWSys1 Supply Mixer; !- Connector 2 Name + + ConnectorList, + SHWSys1 Demand Connectors, !- Name + Connector:Splitter, !- Connector 1 Object Type + SHWSys1 Demand Splitter, !- Connector 1 Name + Connector:Mixer, !- Connector 2 Object Type + SHWSys1 Demand Mixer; !- Connector 2 Name + +!- =========== ALL OBJECTS IN CLASS: NODELIST =========== + + NodeList, + Core_ZN Inlet Nodes, !- Name + Core_ZN Direct Air Inlet Node Name; !- Node 1 Name + + NodeList, + Perimeter_ZN_1 Inlet Nodes, !- Name + Perimeter_ZN_1 Direct Air Inlet Node Name; !- Node 1 Name + + NodeList, + Perimeter_ZN_2 Inlet Nodes, !- Name + Perimeter_ZN_2 Direct Air Inlet Node Name; !- Node 1 Name + + NodeList, + Perimeter_ZN_3 Inlet Nodes, !- Name + Perimeter_ZN_3 Direct Air Inlet Node Name; !- Node 1 Name + + NodeList, + Perimeter_ZN_4 Inlet Nodes, !- Name + Perimeter_ZN_4 Direct Air Inlet Node Name; !- Node 1 Name + + NodeList, + PSZ-AC:1_OANode List, !- Name + PSZ-AC:1_OAInlet Node; !- Node 1 Name + + NodeList, + PSZ-AC:2_OANode List, !- Name + PSZ-AC:2_OAInlet Node; !- Node 1 Name + + NodeList, + PSZ-AC:3_OANode List, !- Name + PSZ-AC:3_OAInlet Node; !- Node 1 Name + + NodeList, + PSZ-AC:4_OANode List, !- Name + PSZ-AC:4_OAInlet Node; !- Node 1 Name + + NodeList, + PSZ-AC:5_OANode List, !- Name + PSZ-AC:5_OAInlet Node; !- Node 1 Name + +!- =========== ALL OBJECTS IN CLASS: OUTDOORAIR:NODE =========== + + OutdoorAir:Node, + PSZ-AC:1_CoolCOA Ref node; !- Name + + OutdoorAir:Node, + PSZ-AC:2_CoolCOA Ref node; !- Name + + OutdoorAir:Node, + PSZ-AC:3_CoolCOA Ref node; !- Name + + OutdoorAir:Node, + PSZ-AC:4_CoolCOA Ref node; !- Name + + OutdoorAir:Node, + PSZ-AC:5_CoolCOA Ref node; !- Name + +!- =========== ALL OBJECTS IN CLASS: OUTDOORAIR:NODELIST =========== + + OutdoorAir:NodeList, + PSZ-AC:1_OANode List; !- Node or NodeList Name 1 + + OutdoorAir:NodeList, + PSZ-AC:2_OANode List; !- Node or NodeList Name 1 + + OutdoorAir:NodeList, + PSZ-AC:3_OANode List; !- Node or NodeList Name 1 + + OutdoorAir:NodeList, + PSZ-AC:4_OANode List; !- Node or NodeList Name 1 + + OutdoorAir:NodeList, + PSZ-AC:5_OANode List; !- Node or NodeList Name 1 + +!- =========== ALL OBJECTS IN CLASS: PUMP:CONSTANTSPEED =========== + + + Pump:ConstantSpeed, + SHWSys1 Pump, !- Name + SHWSys1 Supply Inlet Node, !- Inlet Node Name + SHWSys1 Pump-SHWSys1 Water HeaterNodeviaConnector, !- Outlet Node Name + autosize, !- Design Flow Rate {m3/s} + 0.001, !- Design Pump Head {Pa} + AUTOSIZE, !- Design Power Consumption {W} + 0.30, !- Motor Efficiency + 0.0, !- Fraction of Motor Inefficiencies to Fluid Stream + Intermittent; !- Pump Control Type + +!- =========== ALL OBJECTS IN CLASS: WATERHEATER:MIXED =========== + + + WaterHeater:Mixed, + SHWSys1 Water Heater, !- Name + 0.1514, !- Tank Volume {m3} + SHWSys1 Water Heater Setpoint Temperature Schedule, !- Setpoint Temperature Schedule Name + 2.0, !- Deadband Temperature Difference {deltaC} + 82.2222, !- Maximum Temperature Limit {C} + Cycle, !- Heater Control Type + 11722.84, !- Heater Maximum Capacity {W} + , !- Heater Minimum Capacity {W} + , !- Heater Ignition Minimum Flow Rate {m3/s} + , !- Heater Ignition Delay {s} + + electricity, !- Heater Fuel Type + 1, !- Heater Thermal Efficiency + , !- Part Load Factor Curve Name + 571, !- Off Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 31, 2012 Specify pipe loss for both Off and On cycle parasitic + electricity, !- Off Cycle Parasitic Fuel Type + 0.8, !- Off Cycle Parasitic Heat Fraction to Tank + 571, !- On Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) July 26, 2012: changed from blank to 309 btu/h (90.56 W) for On Cycle Parasitic load to account for pipe loss + electricity, !- On Cycle Parasitic Fuel Type + + + , !- On Cycle Parasitic Heat Fraction to Tank + zone, !- Ambient Temperature Indicator + , !- Ambient Temperature Schedule Name + CORE_ZN, !- Ambient Temperature Zone Name + , !- Ambient Temperature Outdoor Air Node Name + 1.205980747, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K} + , !- Off Cycle Loss Fraction to Zone + 1.205980747, !- On Cycle Loss Coefficient to Ambient Temperature {W/K} + , !- On Cycle Loss Fraction to Zone + 4.048e-06, !- Peak Flow Rate {m3/s} + BLDG_SWH_SCH; !- Use Flow Rate Fraction Schedule Name + + +!- =========== ALL OBJECTS IN CLASS: PLANTLOOP =========== + + + PlantLoop, + SHWSys1, !- Name + Water, !- Fluid Type + , !- User Defined Fluid Type + SHWSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name + SHWSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name + 48.89, !- Maximum Loop Temperature {C} + 10.0, !- Minimum Loop Temperature {C} + AUTOSIZE, !- Maximum Loop Flow Rate {m3/s} + 0.0, !- Minimum Loop Flow Rate {m3/s} + AUTOSIZE, !- Plant Loop Volume {m3} + SHWSys1 Supply Inlet Node, !- Plant Side Inlet Node Name + SHWSys1 Supply Outlet Node, !- Plant Side Outlet Node Name + SHWSys1 Supply Branches, !- Plant Side Branch List Name + SHWSys1 Supply Connectors, !- Plant Side Connector List Name + SHWSys1 Demand Inlet Node, !- Demand Side Inlet Node Name + SHWSys1 Demand Outlet Node, !- Demand Side Outlet Node Name + SHWSys1 Demand Branches, !- Demand Side Branch List Name + SHWSys1 Demand Connectors, !- Demand Side Connector List Name + Optimal; !- Load Distribution Scheme + +!- =========== ALL OBJECTS IN CLASS: PIPE:ADIABATIC =========== + + Pipe:Adiabatic, + SHWSys1 Supply Equipment Bypass Pipe, !- Name + SHWSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name + SHWSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name + + Pipe:Adiabatic, + SHWSys1 Supply Outlet Pipe, !- Name + SHWSys1 Supply Mixer-SHWSys1 Supply Outlet Pipe, !- Inlet Node Name + SHWSys1 Supply Outlet Node; !- Outlet Node Name + + Pipe:Adiabatic, + SHWSys1 Demand Inlet Pipe, !- Name + SHWSys1 Demand Inlet Node, !- Inlet Node Name + SHWSys1 Demand Inlet Pipe-SHWSys1 Demand Mixer; !- Outlet Node Name + + Pipe:Adiabatic, + SHWSys1 Demand Bypass Pipe, !- Name + SHWSys1 Demand Bypass Pipe Inlet Node, !- Inlet Node Name + SHWSys1 Demand Bypass Pipe Outlet Node; !- Outlet Node Name + + Pipe:Adiabatic, + SHWSys1 Demand Outlet Pipe, !- Name + SHWSys1 Demand Mixer-SHWSys1 Demand Outlet Pipe, !- Inlet Node Name + SHWSys1 Demand Outlet Node; !- Outlet Node Name + +!- =========== ALL OBJECTS IN CLASS: PLANTEQUIPMENTLIST =========== + + PlantEquipmentList, + SHWSys1 Equipment List, !- Name + WaterHeater:Mixed, !- Equipment 1 Object Type + SHWSys1 Water Heater; !- Equipment 1 Name + +!- =========== ALL OBJECTS IN CLASS: PLANTEQUIPMENTOPERATION:HEATINGLOAD =========== + + PlantEquipmentOperation:HeatingLoad, + SHWSys1 Operation Scheme,!- Name + 0.0, !- Load Range 1 Lower Limit {W} + 1000000000000000, !- Load Range 1 Upper Limit {W} + SHWSys1 Equipment List; !- Range 1 Equipment List Name + +!- =========== ALL OBJECTS IN CLASS: PLANTEQUIPMENTOPERATIONSCHEMES =========== + + PlantEquipmentOperationSchemes, + SHWSys1 Loop Operation Scheme List, !- Name + PlantEquipmentOperation:HeatingLoad, !- Control Scheme 1 Object Type + SHWSys1 Operation Scheme,!- Control Scheme 1 Name + PlantOnSched; !- Control Scheme 1 Schedule Name + +!- =========== ALL OBJECTS IN CLASS: AVAILABILITYMANAGER:NIGHTCYCLE =========== + + AvailabilityManager:NightCycle, + PSZ-AC:1 Availability Manager, !- Name + Always_On, !- Applicability Schedule Name + HVACOperationSchd, !- Fan Schedule Name + CycleOnAny, !- Control Type + 1.0, !- Thermostat Tolerance {deltaC} + FixedRunTime, !- Cycling Run Time Control Type + 1800; !- Cycling Run Time {s} + + AvailabilityManager:NightCycle, + PSZ-AC:2 Availability Manager, !- Name + Always_On, !- Applicability Schedule Name + HVACOperationSchd, !- Fan Schedule Name + CycleOnAny, !- Control Type + 1.0, !- Thermostat Tolerance {deltaC} + FixedRunTime, !- Cycling Run Time Control Type + 1800; !- Cycling Run Time {s} + + AvailabilityManager:NightCycle, + PSZ-AC:3 Availability Manager, !- Name + Always_On, !- Applicability Schedule Name + HVACOperationSchd, !- Fan Schedule Name + CycleOnAny, !- Control Type + 1.0, !- Thermostat Tolerance {deltaC} + FixedRunTime, !- Cycling Run Time Control Type + 1800; !- Cycling Run Time {s} + + AvailabilityManager:NightCycle, + PSZ-AC:4 Availability Manager, !- Name + Always_On, !- Applicability Schedule Name + HVACOperationSchd, !- Fan Schedule Name + CycleOnAny, !- Control Type + 1.0, !- Thermostat Tolerance {deltaC} + FixedRunTime, !- Cycling Run Time Control Type + 1800; !- Cycling Run Time {s} + + AvailabilityManager:NightCycle, + PSZ-AC:5 Availability Manager, !- Name + Always_On, !- Applicability Schedule Name + HVACOperationSchd, !- Fan Schedule Name + CycleOnAny, !- Control Type + 1.0, !- Thermostat Tolerance {deltaC} + FixedRunTime, !- Cycling Run Time Control Type + 1800; !- Cycling Run Time {s} + +!- =========== ALL OBJECTS IN CLASS: AVAILABILITYMANAGERASSIGNMENTLIST =========== + + AvailabilityManagerAssignmentList, + PSZ-AC:1 Availability Manager List, !- Name + AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type + PSZ-AC:1 Availability Manager; !- Availability Manager 1 Name + + AvailabilityManagerAssignmentList, + PSZ-AC:2 Availability Manager List, !- Name + AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type + PSZ-AC:2 Availability Manager; !- Availability Manager 1 Name + + AvailabilityManagerAssignmentList, + PSZ-AC:3 Availability Manager List, !- Name + AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type + PSZ-AC:3 Availability Manager; !- Availability Manager 1 Name + + AvailabilityManagerAssignmentList, + PSZ-AC:4 Availability Manager List, !- Name + AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type + PSZ-AC:4 Availability Manager; !- Availability Manager 1 Name + + AvailabilityManagerAssignmentList, + PSZ-AC:5 Availability Manager List, !- Name + AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type + PSZ-AC:5 Availability Manager; !- Availability Manager 1 Name + +!- =========== ALL OBJECTS IN CLASS: SETPOINTMANAGER:SCHEDULED =========== + + + SetpointManager:Scheduled, + SHWSys1 Loop Setpoint Manager, !- Name + Temperature, !- Control Variable + SHWSys1-Loop-Temp-Schedule, !- Schedule Name + SHWSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name + +!- =========== ALL OBJECTS IN CLASS: SETPOINTMANAGER:SINGLEZONE:HEATING & COOLING =========== + + +SetpointManager:SingleZone:Heating, + SupAirTemp MngrCore_ZN - Htg, !- Name + Temperature, !- Control Variable + 12.8, !- Minimum Supply Air Temperature {C} + 40.0, !- Maximum Supply Air Temperature {C} + Core_ZN, !- Control Zone Name + Core_ZN Air Node, !- Zone Node Name + Core_ZN Direct Air Inlet Node Name, !- Zone Inlet Node Name + PSZ-AC:1 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name + +SetpointManager:SingleZone:Heating, + SupAirTemp MngrPerimeter_ZN_1 - Htg, !- Name + Temperature, !- Control Variable + 12.8, !- Minimum Supply Air Temperature {C} + 40.0, !- Maximum Supply Air Temperature {C} + Perimeter_ZN_1, !- Control Zone Name + Perimeter_ZN_1 Air Node, !- Zone Node Name + Perimeter_ZN_1 Direct Air Inlet Node Name, !- Zone Inlet Node Name + PSZ-AC:2 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name + +SetpointManager:SingleZone:Heating, + SupAirTemp MngrPerimeter_ZN_2 - Htg, !- Name + Temperature, !- Control Variable + 12.8, !- Minimum Supply Air Temperature {C} + 40.0, !- Maximum Supply Air Temperature {C} + Perimeter_ZN_2, !- Control Zone Name + Perimeter_ZN_2 Air Node, !- Zone Node Name + Perimeter_ZN_2 Direct Air Inlet Node Name, !- Zone Inlet Node Name + PSZ-AC:3 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name + +SetpointManager:SingleZone:Heating, + SupAirTemp MngrPerimeter_ZN_3 - Htg, !- Name + Temperature, !- Control Variable + 12.8, !- Minimum Supply Air Temperature {C} + 40.0, !- Maximum Supply Air Temperature {C} + Perimeter_ZN_3, !- Control Zone Name + Perimeter_ZN_3 Air Node, !- Zone Node Name + Perimeter_ZN_3 Direct Air Inlet Node Name, !- Zone Inlet Node Name + PSZ-AC:4 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name + +SetpointManager:SingleZone:Heating, + SupAirTemp MngrPerimeter_ZN_4 - Htg, !- Name + Temperature, !- Control Variable + 12.8, !- Minimum Supply Air Temperature {C} + 40.0, !- Maximum Supply Air Temperature {C} + Perimeter_ZN_4, !- Control Zone Name + Perimeter_ZN_4 Air Node, !- Zone Node Name + Perimeter_ZN_4 Direct Air Inlet Node Name, !- Zone Inlet Node Name + PSZ-AC:5 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name + +SetpointManager:SingleZone:Cooling, + SupAirTemp MngrCore_ZN - Clg, !- Name + Temperature, !- Control Variable + 12.8, !- Minimum Supply Air Temperature {C} + 40.0, !- Maximum Supply Air Temperature {C} + Core_ZN, !- Control Zone Name + Core_ZN Air Node, !- Zone Node Name + Core_ZN Direct Air Inlet Node Name, !- Zone Inlet Node Name + PSZ-AC:1_CoolC-PSZ-AC:1_HeatCNode; !- Setpoint Node or NodeList Name + +SetpointManager:SingleZone:Cooling, + SupAirTemp MngrPerimeter_ZN_1 - Clg, !- Name + Temperature, !- Control Variable + 12.8, !- Minimum Supply Air Temperature {C} + 40.0, !- Maximum Supply Air Temperature {C} + Perimeter_ZN_1, !- Control Zone Name + Perimeter_ZN_1 Air Node, !- Zone Node Name + Perimeter_ZN_1 Direct Air Inlet Node Name, !- Zone Inlet Node Name + PSZ-AC:2_CoolC-PSZ-AC:2_HeatCNode; !- Setpoint Node or NodeList Name + +SetpointManager:SingleZone:Cooling, + SupAirTemp MngrPerimeter_ZN_2 - Clg, !- Name + Temperature, !- Control Variable + 12.8, !- Minimum Supply Air Temperature {C} + 40.0, !- Maximum Supply Air Temperature {C} + Perimeter_ZN_2, !- Control Zone Name + Perimeter_ZN_2 Air Node, !- Zone Node Name + Perimeter_ZN_2 Direct Air Inlet Node Name, !- Zone Inlet Node Name + PSZ-AC:3_CoolC-PSZ-AC:3_HeatCNode; !- Setpoint Node or NodeList Name + +SetpointManager:SingleZone:Cooling, + SupAirTemp MngrPerimeter_ZN_3 - Clg, !- Name + Temperature, !- Control Variable + 12.8, !- Minimum Supply Air Temperature {C} + 40.0, !- Maximum Supply Air Temperature {C} + Perimeter_ZN_3, !- Control Zone Name + Perimeter_ZN_3 Air Node, !- Zone Node Name + Perimeter_ZN_3 Direct Air Inlet Node Name, !- Zone Inlet Node Name + PSZ-AC:4_CoolC-PSZ-AC:4_HeatCNode; !- Setpoint Node or NodeList Name + +SetpointManager:SingleZone:Cooling, + SupAirTemp MngrPerimeter_ZN_4 - Clg, !- Name + Temperature, !- Control Variable + 12.8, !- Minimum Supply Air Temperature {C} + 40.0, !- Maximum Supply Air Temperature {C} + Perimeter_ZN_4, !- Control Zone Name + Perimeter_ZN_4 Air Node, !- Zone Node Name + Perimeter_ZN_4 Direct Air Inlet Node Name, !- Zone Inlet Node Name + PSZ-AC:5_CoolC-PSZ-AC:5_HeatCNode; !- Setpoint Node or NodeList Name + +!- =========== ALL OBJECTS IN CLASS: SETPOINTMANAGER:MIXEDAIR =========== + + +SetpointManager:MixedAir, + PSZ-AC:1_OAMixed Air Temp Manager, !- Name + Temperature, !- Control Variable + PSZ-AC:1_CoolC-PSZ-AC:1_HeatCNode, !- Reference Setpoint Node Name + PSZ-AC:1_OA-PSZ-AC:1_FanNode, !- Fan Inlet Node Name + PSZ-AC:1_Fan-PSZ-AC:1_CoolCNode, !- Fan Outlet Node Name + PSZ-AC:1_OA-PSZ-AC:1_FanNode; !- Setpoint Node or NodeList Name + +SetpointManager:MixedAir, + PSZ-AC:2_OAMixed Air Temp Manager, !- Name + Temperature, !- Control Variable + PSZ-AC:2_CoolC-PSZ-AC:2_HeatCNode, !- Reference Setpoint Node Name + PSZ-AC:2_OA-PSZ-AC:2_FanNode, !- Fan Inlet Node Name + PSZ-AC:2_Fan-PSZ-AC:2_CoolCNode, !- Fan Outlet Node Name + PSZ-AC:2_OA-PSZ-AC:2_FanNode; !- Setpoint Node or NodeList Name + +SetpointManager:MixedAir, + PSZ-AC:3_OAMixed Air Temp Manager, !- Name + Temperature, !- Control Variable + PSZ-AC:3_CoolC-PSZ-AC:3_HeatCNode, !- Reference Setpoint Node Name + PSZ-AC:3_OA-PSZ-AC:3_FanNode, !- Fan Inlet Node Name + PSZ-AC:3_Fan-PSZ-AC:3_CoolCNode, !- Fan Outlet Node Name + PSZ-AC:3_OA-PSZ-AC:3_FanNode; !- Setpoint Node or NodeList Name + +SetpointManager:MixedAir, + PSZ-AC:4_OAMixed Air Temp Manager, !- Name + Temperature, !- Control Variable + PSZ-AC:4_CoolC-PSZ-AC:4_HeatCNode, !- Reference Setpoint Node Name + PSZ-AC:4_OA-PSZ-AC:4_FanNode, !- Fan Inlet Node Name + PSZ-AC:4_Fan-PSZ-AC:4_CoolCNode, !- Fan Outlet Node Name + PSZ-AC:4_OA-PSZ-AC:4_FanNode; !- Setpoint Node or NodeList Name + +SetpointManager:MixedAir, + PSZ-AC:5_OAMixed Air Temp Manager, !- Name + Temperature, !- Control Variable + PSZ-AC:5_CoolC-PSZ-AC:5_HeatCNode, !- Reference Setpoint Node Name + PSZ-AC:5_OA-PSZ-AC:5_FanNode, !- Fan Inlet Node Name + PSZ-AC:5_Fan-PSZ-AC:5_CoolCNode, !- Fan Outlet Node Name + PSZ-AC:5_OA-PSZ-AC:5_FanNode; !- Setpoint Node or NodeList Name + +!- =========== ALL OBJECTS IN CLASS: WATERUSE:EQUIPMENT =========== + + + WaterUse:Equipment, + Core_ZN Water Equipment, !- Name + WaterUse, !- End-Use Subcategory + 4.048E-06, !- Peak Flow Rate {m3/s} + BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name + Core_ZN Water Equipment Temp Sched, !- Target Temperature Schedule Name + Core_ZN Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name + , !- Cold Water Supply Temperature Schedule Name + Core_ZN, !- Zone Name + Core_ZN Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name + Core_ZN Water Equipment Latent fract sched; !- Latent Fraction Schedule Name + +!- =========== ALL OBJECTS IN CLASS: WATERUSE:CONNECTIONS =========== + + + WaterUse:Connections, + Core_ZN Water Equipment, !- Name + Core_ZN Water Equipment Water Inlet Node, !- Inlet Node Name + Core_ZN Water Equipment Water Outlet Node, !- Outlet Node Name + , !- Supply Water Storage Tank Name + , !- Reclamation Water Storage Tank Name + , !- Hot Water Supply Temperature Schedule Name + , !- Cold Water Supply Temperature Schedule Name + , !- Drain Water Heat Exchanger Type + , !- Drain Water Heat Exchanger Destination + , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} + Core_ZN Water Equipment; !- Water Use Equipment 1 Name + +!No PV for this case +!- =========== ALL OBJECTS IN CLASS: CURVE:QUADRATIC =========== + + Curve:Quadratic, + PSZ-AC:1_CoolCLennoxStandard10Ton_TGA120S2B_CapFF, !- Name + 0.77136, !- Coefficient1 Constant + 0.34053, !- Coefficient2 x + -0.11088, !- Coefficient3 x**2 + 0.75918, !- Minimum Value of x + 1.13877; !- Maximum Value of x + + Curve:Quadratic, + PSZ-AC:1_CoolCLennoxStandard10Ton_TGA120S2B_EIRFFF, !- Name + 1.20550, !- Coefficient1 Constant + -0.32953, !- Coefficient2 x + 0.12308, !- Coefficient3 x**2 + 0.75918, !- Minimum Value of x + 1.13877; !- Maximum Value of x + + Curve:Quadratic, + PSZ-AC:1_CoolCLennoxStandard10Ton_TGA120S2B_PLR, !- Name + 0.77100, !- Coefficient1 Constant + 0.22900, !- Coefficient2 x + 0.0, !- Coefficient3 x**2 + 0.0, !- Minimum Value of x + 1.0; !- Maximum Value of x + + Curve:Quadratic, + PSZ-AC:2_CoolCLennoxStandard10Ton_TGA120S2B_CapFF, !- Name + 0.77136, !- Coefficient1 Constant + 0.34053, !- Coefficient2 x + -0.11088, !- Coefficient3 x**2 + 0.75918, !- Minimum Value of x + 1.13877; !- Maximum Value of x + + Curve:Quadratic, + PSZ-AC:2_CoolCLennoxStandard10Ton_TGA120S2B_EIRFFF, !- Name + 1.20550, !- Coefficient1 Constant + -0.32953, !- Coefficient2 x + 0.12308, !- Coefficient3 x**2 + 0.75918, !- Minimum Value of x + 1.13877; !- Maximum Value of x + + Curve:Quadratic, + PSZ-AC:2_CoolCLennoxStandard10Ton_TGA120S2B_PLR, !- Name + 0.77100, !- Coefficient1 Constant + 0.22900, !- Coefficient2 x + 0.0, !- Coefficient3 x**2 + 0.0, !- Minimum Value of x + 1.0; !- Maximum Value of x + + Curve:Quadratic, + PSZ-AC:3_CoolCLennoxStandard10Ton_TGA120S2B_CapFF, !- Name + 0.77136, !- Coefficient1 Constant + 0.34053, !- Coefficient2 x + -0.11088, !- Coefficient3 x**2 + 0.75918, !- Minimum Value of x + 1.13877; !- Maximum Value of x + + Curve:Quadratic, + PSZ-AC:3_CoolCLennoxStandard10Ton_TGA120S2B_EIRFFF, !- Name + 1.20550, !- Coefficient1 Constant + -0.32953, !- Coefficient2 x + 0.12308, !- Coefficient3 x**2 + 0.75918, !- Minimum Value of x + 1.13877; !- Maximum Value of x + + Curve:Quadratic, + PSZ-AC:3_CoolCLennoxStandard10Ton_TGA120S2B_PLR, !- Name + 0.77100, !- Coefficient1 Constant + 0.22900, !- Coefficient2 x + 0.0, !- Coefficient3 x**2 + 0.0, !- Minimum Value of x + 1.0; !- Maximum Value of x + + Curve:Quadratic, + PSZ-AC:4_CoolCLennoxStandard10Ton_TGA120S2B_CapFF, !- Name + 0.77136, !- Coefficient1 Constant + 0.34053, !- Coefficient2 x + -0.11088, !- Coefficient3 x**2 + 0.75918, !- Minimum Value of x + 1.13877; !- Maximum Value of x + + Curve:Quadratic, + PSZ-AC:4_CoolCLennoxStandard10Ton_TGA120S2B_EIRFFF, !- Name + 1.20550, !- Coefficient1 Constant + -0.32953, !- Coefficient2 x + 0.12308, !- Coefficient3 x**2 + 0.75918, !- Minimum Value of x + 1.13877; !- Maximum Value of x + + Curve:Quadratic, + PSZ-AC:4_CoolCLennoxStandard10Ton_TGA120S2B_PLR, !- Name + 0.77100, !- Coefficient1 Constant + 0.22900, !- Coefficient2 x + 0.0, !- Coefficient3 x**2 + 0.0, !- Minimum Value of x + 1.0; !- Maximum Value of x + + Curve:Quadratic, + PSZ-AC:5_CoolCLennoxStandard10Ton_TGA120S2B_CapFF, !- Name + 0.77136, !- Coefficient1 Constant + 0.34053, !- Coefficient2 x + -0.11088, !- Coefficient3 x**2 + 0.75918, !- Minimum Value of x + 1.13877; !- Maximum Value of x + + Curve:Quadratic, + PSZ-AC:5_CoolCLennoxStandard10Ton_TGA120S2B_EIRFFF, !- Name + 1.20550, !- Coefficient1 Constant + -0.32953, !- Coefficient2 x + 0.12308, !- Coefficient3 x**2 + 0.75918, !- Minimum Value of x + 1.13877; !- Maximum Value of x + + Curve:Quadratic, + PSZ-AC:5_CoolCLennoxStandard10Ton_TGA120S2B_PLR, !- Name + 0.77100, !- Coefficient1 Constant + 0.22900, !- Coefficient2 x + 0.0, !- Coefficient3 x**2 + 0.0, !- Minimum Value of x + 1.0; !- Maximum Value of x + +!- =========== ALL OBJECTS IN CLASS: CURVE:BIQUADRATIC =========== + + Curve:Biquadratic, + PSZ-AC:1_CoolCLennoxStandard10Ton_TGA120S2B_CapFT, !- Name + 0.42415, !- Coefficient1 Constant + 0.04426, !- Coefficient2 x + -0.00042, !- Coefficient3 x**2 + 0.00333, !- Coefficient4 y + -0.00008, !- Coefficient5 y**2 + -0.00021, !- Coefficient6 x*y + 17.00000, !- Minimum Value of x + 22.00000, !- Maximum Value of x + 29.00000, !- Minimum Value of y + 46.00000; !- Maximum Value of y + + Curve:Biquadratic, + PSZ-AC:1_CoolCLennoxStandard10Ton_TGA120S2B_EIRFT, !- Name + 1.23649, !- Coefficient1 Constant + -0.02431, !- Coefficient2 x + 0.00057, !- Coefficient3 x**2 + -0.01434, !- Coefficient4 y + 0.00063, !- Coefficient5 y**2 + -0.00038, !- Coefficient6 x*y + 17.00000, !- Minimum Value of x + 22.00000, !- Maximum Value of x + 29.00000, !- Minimum Value of y + 46.00000; !- Maximum Value of y + + Curve:Biquadratic, + PSZ-AC:2_CoolCLennoxStandard10Ton_TGA120S2B_CapFT, !- Name + 0.42415, !- Coefficient1 Constant + 0.04426, !- Coefficient2 x + -0.00042, !- Coefficient3 x**2 + 0.00333, !- Coefficient4 y + -0.00008, !- Coefficient5 y**2 + -0.00021, !- Coefficient6 x*y + 17.00000, !- Minimum Value of x + 22.00000, !- Maximum Value of x + 29.00000, !- Minimum Value of y + 46.00000; !- Maximum Value of y + + Curve:Biquadratic, + PSZ-AC:2_CoolCLennoxStandard10Ton_TGA120S2B_EIRFT, !- Name + 1.23649, !- Coefficient1 Constant + -0.02431, !- Coefficient2 x + 0.00057, !- Coefficient3 x**2 + -0.01434, !- Coefficient4 y + 0.00063, !- Coefficient5 y**2 + -0.00038, !- Coefficient6 x*y + 17.00000, !- Minimum Value of x + 22.00000, !- Maximum Value of x + 29.00000, !- Minimum Value of y + 46.00000; !- Maximum Value of y + + Curve:Biquadratic, + PSZ-AC:3_CoolCLennoxStandard10Ton_TGA120S2B_CapFT, !- Name + 0.42415, !- Coefficient1 Constant + 0.04426, !- Coefficient2 x + -0.00042, !- Coefficient3 x**2 + 0.00333, !- Coefficient4 y + -0.00008, !- Coefficient5 y**2 + -0.00021, !- Coefficient6 x*y + 17.00000, !- Minimum Value of x + 22.00000, !- Maximum Value of x + 29.00000, !- Minimum Value of y + 46.00000; !- Maximum Value of y + + Curve:Biquadratic, + PSZ-AC:3_CoolCLennoxStandard10Ton_TGA120S2B_EIRFT, !- Name + 1.23649, !- Coefficient1 Constant + -0.02431, !- Coefficient2 x + 0.00057, !- Coefficient3 x**2 + -0.01434, !- Coefficient4 y + 0.00063, !- Coefficient5 y**2 + -0.00038, !- Coefficient6 x*y + 17.00000, !- Minimum Value of x + 22.00000, !- Maximum Value of x + 29.00000, !- Minimum Value of y + 46.00000; !- Maximum Value of y + + Curve:Biquadratic, + PSZ-AC:4_CoolCLennoxStandard10Ton_TGA120S2B_CapFT, !- Name + 0.42415, !- Coefficient1 Constant + 0.04426, !- Coefficient2 x + -0.00042, !- Coefficient3 x**2 + 0.00333, !- Coefficient4 y + -0.00008, !- Coefficient5 y**2 + -0.00021, !- Coefficient6 x*y + 17.00000, !- Minimum Value of x + 22.00000, !- Maximum Value of x + 29.00000, !- Minimum Value of y + 46.00000; !- Maximum Value of y + + Curve:Biquadratic, + PSZ-AC:4_CoolCLennoxStandard10Ton_TGA120S2B_EIRFT, !- Name + 1.23649, !- Coefficient1 Constant + -0.02431, !- Coefficient2 x + 0.00057, !- Coefficient3 x**2 + -0.01434, !- Coefficient4 y + 0.00063, !- Coefficient5 y**2 + -0.00038, !- Coefficient6 x*y + 17.00000, !- Minimum Value of x + 22.00000, !- Maximum Value of x + 29.00000, !- Minimum Value of y + 46.00000; !- Maximum Value of y + + Curve:Biquadratic, + PSZ-AC:5_CoolCLennoxStandard10Ton_TGA120S2B_CapFT, !- Name + 0.42415, !- Coefficient1 Constant + 0.04426, !- Coefficient2 x + -0.00042, !- Coefficient3 x**2 + 0.00333, !- Coefficient4 y + -0.00008, !- Coefficient5 y**2 + -0.00021, !- Coefficient6 x*y + 17.00000, !- Minimum Value of x + 22.00000, !- Maximum Value of x + 29.00000, !- Minimum Value of y + 46.00000; !- Maximum Value of y + + Curve:Biquadratic, + PSZ-AC:5_CoolCLennoxStandard10Ton_TGA120S2B_EIRFT, !- Name + 1.23649, !- Coefficient1 Constant + -0.02431, !- Coefficient2 x + 0.00057, !- Coefficient3 x**2 + -0.01434, !- Coefficient4 y + 0.00063, !- Coefficient5 y**2 + -0.00038, !- Coefficient6 x*y + 17.00000, !- Minimum Value of x + 22.00000, !- Maximum Value of x + 29.00000, !- Minimum Value of y + 46.00000; !- Maximum Value of y + +!- =========== ALL OBJECTS IN CLASS: CURVE:QUADRATIC =========== + + Curve:Quadratic, + HPACCoolCapFFF, !- Name + 0.8, !- Coefficient1 Constant + 0.2, !- Coefficient2 x + 0.0, !- Coefficient3 x**2 + 0.5, !- Minimum Value of x + 1.5; !- Maximum Value of x + + Curve:Quadratic, + HPACCOOLEIRFFF, !- Name + 1.156, !- Coefficient1 Constant + -0.1816, !- Coefficient2 x + 0.0256, !- Coefficient3 x**2 + 0.5, !- Minimum Value of x + 1.5; !- Maximum Value of x + + Curve:Quadratic, + HPACCOOLPLFFPLR, !- Name + 0.85, !- Coefficient1 Constant + 0.15, !- Coefficient2 x + 0.0, !- Coefficient3 x**2 + 0.0, !- Minimum Value of x + 1.0; !- Maximum Value of x + + Curve:Quadratic, + HPACHeatEIRFFF, !- Name + 1.3824, !- Coefficient1 Constant + -0.4336, !- Coefficient2 x + 0.0512, !- Coefficient3 x**2 + 0.0, !- Minimum Value of x + 1.0; !- Maximum Value of x + +!- =========== ALL OBJECTS IN CLASS: CURVE:CUBIC =========== + + Curve:Cubic, + HPACHeatCapFT, !- Name + 0.758746, !- Coefficient1 Constant + 0.027626, !- Coefficient2 x + 0.000148716, !- Coefficient3 x**2 + 0.0000034992, !- Coefficient4 x**3 + -20.0, !- Minimum Value of x + 20.0; !- Maximum Value of x + + Curve:Cubic, + HPACHeatCapFFF, !- Name + 0.84, !- Coefficient1 Constant + 0.16, !- Coefficient2 x + 0.0, !- Coefficient3 x**2 + 0.0, !- Coefficient4 x**3 + 0.5, !- Minimum Value of x + 1.5; !- Maximum Value of x + + Curve:Cubic, + HPACHeatEIRFT, !- Name + 1.19248, !- Coefficient1 Constant + -0.0300438, !- Coefficient2 x + 0.00103745, !- Coefficient3 x**2 + -0.000023328, !- Coefficient4 x**3 + -20.0, !- Minimum Value of x + 20.0; !- Maximum Value of x + +!- =========== ALL OBJECTS IN CLASS: CURVE:BIQUADRATIC =========== + + Curve:Biquadratic, + HPACCoolCapFT, !- Name + 0.766956, !- Coefficient1 Constant + 0.0107756, !- Coefficient2 x + -0.0000414703, !- Coefficient3 x**2 + 0.00134961, !- Coefficient4 y + -0.000261144, !- Coefficient5 y**2 + 0.000457488, !- Coefficient6 x*y + 12.77778, !- Minimum Value of x + 23.88889, !- Maximum Value of x + 21.11111, !- Minimum Value of y + 46.11111; !- Maximum Value of y + + Curve:Biquadratic, + HPACCOOLEIRFT, !- Name + 0.297145, !- Coefficient1 Constant + 0.0430933, !- Coefficient2 x + -0.000748766, !- Coefficient3 x**2 + 0.00597727, !- Coefficient4 y + 0.000482112, !- Coefficient5 y**2 + -0.000956448, !- Coefficient6 x*y + 12.77778, !- Minimum Value of x + 23.88889, !- Maximum Value of x + 21.11111, !- Minimum Value of y + 46.11111; !- Maximum Value of y + +!- =========== ALL OBJECTS IN CLASS: REPORT METERFILEONLY =========== + + Output:Meter:MeterFileOnly,Electricity:Facility,Hourly; + + Output:Meter:MeterFileOnly,ElectricityNet:Facility,Hourly; + + Output:Meter:MeterFileOnly,Gas:Facility,Hourly; + +!- =========== ALL OBJECTS IN CLASS: OUTPUTCONTROL:TABLE:STYLE =========== + + OutputControl:Table:Style, + CommaAndHTML; !- Column Separator + +!- =========== ALL OBJECTS IN CLASS: OUTPUTCONTROL:REPORTINGTOLERANCES =========== + + + +OutputControl:ReportingTolerances, + 0.556, !- Tolerance for Time Heating Setpoint Not Met {deltaC} + 0.556; !- Tolerance for Time Cooling Setpoint Not Met {deltaC} + +!- =========== ALL OBJECTS IN CLASS: OUTPUT:VARIABLE =========== + +! Output:Variable,*,Site Outdoor Air Drybulb Temperature,Hourly; +! Output:Variable,*,Site Outdoor Air Wetbulb Temperature,Hourly; +! Output:Variable,HVACOperationSchd,Schedule Value,Hourly; +! +! ! Outdoor Air Flow +! +! Output:Variable,PSZ-AC:1_OAInlet Node,System Node VolFlowRate,Hourly; +! Output:Variable,PSZ-AC:2_OAInlet Node,System Node VolFlowRate,Hourly; +! Output:Variable,PSZ-AC:3_OAInlet Node,System Node VolFlowRate,Hourly; +! Output:Variable,PSZ-AC:4_OAInlet Node,System Node VolFlowRate,Hourly; +! Output:Variable,PSZ-AC:5_OAInlet Node,System Node VolFlowRate,Hourly; +! +! ! Return Air Flow +! +! Output:Variable,PSZ-AC:1 Supply Equipment Inlet Node,System Node VolFlowRate,Hourly; +! Output:Variable,PSZ-AC:2 Supply Equipment Inlet Node,System Node VolFlowRate,Hourly; +! Output:Variable,PSZ-AC:3 Supply Equipment Inlet Node,System Node VolFlowRate,Hourly; +! Output:Variable,PSZ-AC:4 Supply Equipment Inlet Node,System Node VolFlowRate,Hourly; +! Output:Variable,PSZ-AC:5 Supply Equipment Inlet Node,System Node VolFlowRate,Hourly; +! +! ! Return Air Tdb +! +! Output:Variable,PSZ-AC:1 Supply Equipment Inlet Node,System Node Temperature,Hourly; +! Output:Variable,PSZ-AC:2 Supply Equipment Inlet Node,System Node Temperature,Hourly; +! Output:Variable,PSZ-AC:3 Supply Equipment Inlet Node,System Node Temperature,Hourly; +! Output:Variable,PSZ-AC:4 Supply Equipment Inlet Node,System Node Temperature,Hourly; +! Output:Variable,PSZ-AC:5 Supply Equipment Inlet Node,System Node Temperature,Hourly; +! +! ! Return Air Twb +! +! Output:Variable,PSZ-AC:1 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; +! Output:Variable,PSZ-AC:2 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; +! Output:Variable,PSZ-AC:3 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; +! Output:Variable,PSZ-AC:4 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; +! Output:Variable,PSZ-AC:5 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; +! +! ! supply Air Flow +! +! Output:Variable,PSZ-AC:1 Supply Equipment Outlet Node,System Node VolFlowRate,Hourly; +! Output:Variable,PSZ-AC:2 Supply Equipment Outlet Node,System Node VolFlowRate,Hourly; +! Output:Variable,PSZ-AC:3 Supply Equipment Outlet Node,System Node VolFlowRate,Hourly; +! Output:Variable,PSZ-AC:4 Supply Equipment Outlet Node,System Node VolFlowRate,Hourly; +! Output:Variable,PSZ-AC:5 Supply Equipment Outlet Node,System Node VolFlowRate,Hourly; +! +! ! supply Air Tdb +! +! Output:Variable,PSZ-AC:1 Supply Equipment Outlet Node,System Node Temperature,Hourly; +! Output:Variable,PSZ-AC:2 Supply Equipment Outlet Node,System Node Temperature,Hourly; +! Output:Variable,PSZ-AC:3 Supply Equipment Outlet Node,System Node Temperature,Hourly; +! Output:Variable,PSZ-AC:4 Supply Equipment Outlet Node,System Node Temperature,Hourly; +! Output:Variable,PSZ-AC:5 Supply Equipment Outlet Node,System Node Temperature,Hourly; +! +! ! supply Air Twb +! +! Output:Variable,PSZ-AC:1 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; +! Output:Variable,PSZ-AC:2 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; +! Output:Variable,PSZ-AC:3 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; +! Output:Variable,PSZ-AC:4 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; +! Output:Variable,PSZ-AC:5 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; +! +! ! Coil Load +! +! Output:Variable,*,Air System Cooling Coil Total Cooling Energy,Hourly; +! Output:Variable,*,Air System Heating Coil Total Heating Energy,Hourly; +! +! ! SHW +! +! Output:Variable,*,Water Heater Heating Rate,Hourly; +! +! ! Fan and Pump +! +! Output:Variable,*,Fan Electric Power,hourly; !- HVAC Average W +! Output:Variable,*,Pump Electric Power,hourly; !- HVAC Average W +! Output:Variable,*,Humidifier Electric Power,hourly; !- HVAC Average W +! +! ! Utility and Submeter +! +! Output:Meter,Electricity:Facility,Hourly; +! Output:Meter,Gas:Facility,Hourly; +! Output:Meter,InteriorLights:Electricity,Hourly; +! Output:Meter,ExteriorLights:Electricity,Hourly; +! Output:Meter,InteriorEquipment:Electricity,Hourly; +! Output:Meter,ExteriorEquipment:Electricity,Hourly; +! Output:Meter,Fans:Electricity,Hourly; +! Output:Meter,Pumps:Electricity,Hourly; +! Output:Meter,Heating:Electricity,Hourly; +! Output:Meter,Cooling:Electricity,Hourly; +! Output:Meter,HeatRejection:Electricity,Hourly; +! Output:Meter,Humidifier:Electricity,Hourly; +! Output:Meter,HeatRecovery:Electricity,Hourly; +! Output:Meter,DHW:Electricity,Hourly; +! Output:Meter,Cogeneration:Electricity,Hourly; +! Output:Meter,Refrigeration:Electricity,Hourly; +! Output:Meter,WaterSystems:Electricity,Hourly; +! +! Output:Meter,InteriorLights:Gas,Hourly; +! Output:Meter,ExteriorLights:Gas,Hourly; +! Output:Meter,InteriorEquipment:Gas,Hourly; +! Output:Meter,ExteriorEquipment:Gas,Hourly; +! Output:Meter,Fans:Gas,Hourly; +! Output:Meter,Pumps:Gas,Hourly; +! Output:Meter,Heating:Gas,Hourly; +! Output:Meter,Cooling:Gas,Hourly; +! Output:Meter,HeatRejection:Gas,Hourly; +! Output:Meter,Humidifier:Gas,Hourly; +! Output:Meter,HeatRecovery:Gas,Hourly; +! Output:Meter,DHW:Gas,Hourly; +! Output:Meter,Cogeneration:Gas,Hourly; +! Output:Meter,Refrigeration:Gas,Hourly; +! Output:Meter,WaterSystems:Gas,Hourly; + +!- =========== ALL OBJECTS IN CLASS: OUTPUT:TABLE:SUMMARYREPORTS =========== + + + Output:Table:SummaryReports, + AllSummaryAndMonthly; !- Report 1 Name + +!- =========== ALL OBJECTS IN CLASS: REPORT:TABLE:MONTHLY =========== + Output:Table:Monthly, + NameHolderMonthlySummary TaskPurpose ProgressIndicator, !- Name ProgressIndicator,ForDetermination2019, ... + 3, !- Digits After Decimal + Site Outdoor Air Drybulb, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + Heating:Gas, !- Variable or Meter 2 Name + SumOrAverage; !- Aggregation Type for Variable or Meter 2 + + Output:Table:Monthly, + NameHolderMonthlySummary CodeName ASHRAE901, !- Name ASHRAE901, ASHRAE1891, IECC, Title24, ORSC, IGCC, ... + 3, !- Digits After Decimal + Site Outdoor Air Drybulb, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + Heating:Gas, !- Variable or Meter 2 Name + SumOrAverage; !- Aggregation Type for Variable or Meter 2 + + Output:Table:Monthly, + NameHolderMonthlySummary CodeYear 2019, !- Name all years for ASHRAE90.1, IECC, ASHRAE189.1 + 3, !- Digits After Decimal + Site Outdoor Air Drybulb, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + Heating:Gas, !- Variable or Meter 2 Name + SumOrAverage; !- Aggregation Type for Variable or Meter 2 + + Output:Table:Monthly, + NameHolderMonthlySummary CodeAmendment NoneAmend, !- Name StateAmend,EEM, NoneAmend for national or state without amendment + 3, !- Digits After Decimal + Site Outdoor Air Drybulb, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + Heating:Gas, !- Variable or Meter 2 Name + SumOrAverage; !- Aggregation Type for Variable or Meter 2 + + Output:Table:Monthly, + NameHolderMonthlySummary PrototypeName OfficeSmall, !- Name 16 Prototypes + 3, !- Digits After Decimal + Site Outdoor Air Drybulb, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + Heating:Gas, !- Variable or Meter 2 Name + SumOrAverage; !- Aggregation Type for Variable or Meter 2 + + Output:Table:Monthly, + NameHolderMonthlySummary TaskScope National, !- Name National, State, City + 3, !- Digits After Decimal + Site Outdoor Air Drybulb, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + Heating:Gas, !- Variable or Meter 2 Name + SumOrAverage; !- Aggregation Type for Variable or Meter 2 + + + Output:Table:Monthly, + NameHolderMonthlySummary State National, !- Name National for national analysis, NewYork, Utah,... for state analysis, or city name for city analysis. Spell out the name of the state without space between words + 3, !- Digits After Decimal + Site Outdoor Air Drybulb, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + Heating:Gas, !- Variable or Meter 2 Name + SumOrAverage; !- Aggregation Type for Variable or Meter 2 + + Output:Table:Monthly, + NameHolderMonthlySummary ClimateZone 5A, !- Name 0-8 + 3, !- Digits After Decimal + Site Outdoor Air Drybulb, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + Heating:Gas, !- Variable or Meter 2 Name + SumOrAverage; !- Aggregation Type for Variable or Meter 2 + + Output:Table:Monthly, + NameHolderMonthlySummary RepresentCity USA_NY_Buffalo, !- Name representative city like Honolulu for national, for each state, for city analysis. this is not the city of the weather file. The weather city will be extracted from epw file + 3, !- Digits After Decimal + Site Outdoor Air Drybulb, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + Heating:Gas, !- Variable or Meter 2 Name + SumOrAverage; !- Aggregation Type for Variable or Meter 2 + + + + +EnergyManagementSystem:Sensor, + ActualOccupancy, !- Name + Binary Occupancy, !- Output:Variable or Output:Meter Index Key Name + Schedule Value; !- Output:Variable or Output:Meter Name + + EnergyManagementSystem:Sensor, + Core_ZN_LSr, !- Name + Core_ZN, !- Output:Variable or Output:Meter Index Key Name + Zone Lights Electric Power; !- Output:Variable or Output:Meter Name + + EnergyManagementSystem:Sensor, + Core_ZN_Occ_Sensor, !- Name + Core_ZN, !- Output:Variable or Output:Meter Index Key Name + People Occupant Count; !- Output:Variable or Output:Meter Name + + EnergyManagementSystem:InternalVariable, + Core_ZN_Area, !- Name + Core_ZN, !- Internal Data Index Key Name + Zone Floor Area; !- Internal Data Type + + EnergyManagementSystem:Actuator, + Core_ZN_Light_Actuator, !- Name + Core_ZN_lights, !- Actuated Component Unique Name + Lights, !- Actuated Component Type + Electric Power Level; !- Actuated Component Control Type + + EnergyManagementSystem:Program, + SET_Core_ZN_Light_EMS_Program, !- Name + SET Core_ZN_LSr_IP=0.093*Core_ZN_LSr/Core_ZN_Area, ! Calculate the actual LPD for each hour + IF (Core_ZN_Occ_Sensor <= 0) && (Core_ZN_LSr_IP >= 0.02), + SET Core_ZN_Light_Actuator = 0.02*Core_ZN_Area/0.09290304, + ELSE, + SET Core_ZN_Light_Actuator = NULL, + ENDIF; + + EnergyManagementSystem:ProgramCallingManager, + SET_Core_ZN_Light_EMS_Program_Prog_Manager, !- Name + BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point + SET_Core_ZN_Light_EMS_Program; !- Program Name 1 + + + EnergyManagementSystem:Sensor, + Perimeter_ZN_1_LSr, !- Name + Perimeter_ZN_1, !- Output:Variable or Output:Meter Index Key Name + Zone Lights Electric Power; !- Output:Variable or Output:Meter Name + + EnergyManagementSystem:Sensor, + Perimeter_ZN_1_Occ_Sensor, !- Name + Perimeter_ZN_1, !- Output:Variable or Output:Meter Index Key Name + People Occupant Count; !- Output:Variable or Output:Meter Name + + EnergyManagementSystem:InternalVariable, + Perimeter_ZN_1_Area, !- Name + Perimeter_ZN_1, !- Internal Data Index Key Name + Zone Floor Area; !- Internal Data Type + + EnergyManagementSystem:Actuator, + Perimeter_ZN_1_Light_Actuator, !- Name + Perimeter_ZN_1_lights, !- Actuated Component Unique Name + Lights, !- Actuated Component Type + Electric Power Level; !- Actuated Component Control Type + + EnergyManagementSystem:Program, + SET_Perimeter_ZN_1_Light_EMS_Program, !- Name + SET Perimeter_ZN_1_LSr_IP=0.093*Perimeter_ZN_1_LSr/Perimeter_ZN_1_Area, ! Calculate the actual LPD for each hour + IF (Perimeter_ZN_1_Occ_Sensor <= 0) && (Perimeter_ZN_1_LSr_IP >= 0.02), + SET Perimeter_ZN_1_Light_Actuator = 0.02*Perimeter_ZN_1_Area/0.09290304, + ELSE, + SET Perimeter_ZN_1_Light_Actuator = NULL, + ENDIF; + + EnergyManagementSystem:ProgramCallingManager, + SET_Perimeter_ZN_1_Light_EMS_Program_Prog_Manager, !- Name + BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point + SET_Perimeter_ZN_1_Light_EMS_Program; !- Program Name 1 + + + EnergyManagementSystem:Sensor, + Perimeter_ZN_2_LSr, !- Name + Perimeter_ZN_2, !- Output:Variable or Output:Meter Index Key Name + Zone Lights Electric Power; !- Output:Variable or Output:Meter Name + + EnergyManagementSystem:Sensor, + Perimeter_ZN_2_Occ_Sensor, !- Name + Perimeter_ZN_2, !- Output:Variable or Output:Meter Index Key Name + People Occupant Count; !- Output:Variable or Output:Meter Name + + EnergyManagementSystem:InternalVariable, + Perimeter_ZN_2_Area, !- Name + Perimeter_ZN_2, !- Internal Data Index Key Name + Zone Floor Area; !- Internal Data Type + + EnergyManagementSystem:Actuator, + Perimeter_ZN_2_Light_Actuator, !- Name + Perimeter_ZN_2_lights, !- Actuated Component Unique Name + Lights, !- Actuated Component Type + Electric Power Level; !- Actuated Component Control Type + + EnergyManagementSystem:Program, + SET_Perimeter_ZN_2_Light_EMS_Program, !- Name + SET Perimeter_ZN_2_LSr_IP=0.093*Perimeter_ZN_2_LSr/Perimeter_ZN_2_Area, ! Calculate the actual LPD for each hour + IF (Perimeter_ZN_2_Occ_Sensor <= 0) && (Perimeter_ZN_2_LSr_IP >= 0.02), + IF (ActualOccupancy <= 0), !- Check is to avoid conflict with Add. G + SET Perimeter_ZN_2_Light_Actuator = 0.02*Perimeter_ZN_2_Area/0.09290304, + ELSE, + SET Perimeter_ZN_2_Light_Actuator = NULL, + ENDIF, + ELSE, + SET Perimeter_ZN_2_Light_Actuator = NULL, + ENDIF; + + EnergyManagementSystem:ProgramCallingManager, + SET_Perimeter_ZN_2_Light_EMS_Program_Prog_Manager, !- Name + BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point + SET_Perimeter_ZN_2_Light_EMS_Program; !- Program Name 1 + + + EnergyManagementSystem:Sensor, + Perimeter_ZN_3_LSr, !- Name + Perimeter_ZN_3, !- Output:Variable or Output:Meter Index Key Name + Zone Lights Electric Power; !- Output:Variable or Output:Meter Name + + EnergyManagementSystem:Sensor, + Perimeter_ZN_3_Occ_Sensor, !- Name + Perimeter_ZN_3, !- Output:Variable or Output:Meter Index Key Name + People Occupant Count; !- Output:Variable or Output:Meter Name + + EnergyManagementSystem:InternalVariable, + Perimeter_ZN_3_Area, !- Name + Perimeter_ZN_3, !- Internal Data Index Key Name + Zone Floor Area; !- Internal Data Type + + EnergyManagementSystem:Actuator, + Perimeter_ZN_3_Light_Actuator, !- Name + Perimeter_ZN_3_lights, !- Actuated Component Unique Name + Lights, !- Actuated Component Type + Electric Power Level; !- Actuated Component Control Type + + EnergyManagementSystem:Program, + SET_Perimeter_ZN_3_Light_EMS_Program, !- Name + SET Perimeter_ZN_3_LSr_IP=0.093*Perimeter_ZN_3_LSr/Perimeter_ZN_3_Area, ! Calculate the actual LPD for each hour + IF (Perimeter_ZN_3_Occ_Sensor <= 0) && (Perimeter_ZN_3_LSr_IP >= 0.02), + SET Perimeter_ZN_3_Light_Actuator = 0.02*Perimeter_ZN_3_Area/0.09290304, + ELSE, + SET Perimeter_ZN_3_Light_Actuator = NULL, + ENDIF; + + EnergyManagementSystem:ProgramCallingManager, + SET_Perimeter_ZN_3_Light_EMS_Program_Prog_Manager, !- Name + BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point + SET_Perimeter_ZN_3_Light_EMS_Program; !- Program Name 1 + + + EnergyManagementSystem:Sensor, + Perimeter_ZN_4_LSr, !- Name + Perimeter_ZN_4, !- Output:Variable or Output:Meter Index Key Name + Zone Lights Electric Power; !- Output:Variable or Output:Meter Name + + EnergyManagementSystem:Sensor, + Perimeter_ZN_4_Occ_Sensor, !- Name + Perimeter_ZN_4, !- Output:Variable or Output:Meter Index Key Name + People Occupant Count; !- Output:Variable or Output:Meter Name + + EnergyManagementSystem:InternalVariable, + Perimeter_ZN_4_Area, !- Name + Perimeter_ZN_4, !- Internal Data Index Key Name + Zone Floor Area; !- Internal Data Type + + EnergyManagementSystem:Actuator, + Perimeter_ZN_4_Light_Actuator, !- Name + Perimeter_ZN_4_lights, !- Actuated Component Unique Name + Lights, !- Actuated Component Type + Electric Power Level; !- Actuated Component Control Type + + EnergyManagementSystem:Program, + SET_Perimeter_ZN_4_Light_EMS_Program, !- Name + SET Perimeter_ZN_4_LSr_IP=0.093*Perimeter_ZN_4_LSr/Perimeter_ZN_4_Area, ! Calculate the actual LPD for each hour + IF (Perimeter_ZN_4_Occ_Sensor <= 0) && (Perimeter_ZN_4_LSr_IP >= 0.02), + SET Perimeter_ZN_4_Light_Actuator = 0.02*Perimeter_ZN_4_Area/0.09290304, + ELSE, + SET Perimeter_ZN_4_Light_Actuator = NULL, + ENDIF; + + EnergyManagementSystem:ProgramCallingManager, + SET_Perimeter_ZN_4_Light_EMS_Program_Prog_Manager, !- Name + BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point + SET_Perimeter_ZN_4_Light_EMS_Program; !- Program Name 1 + + +