hub/exports/building_energy/idf.py

@@ -54,6 +54,14 @@ class Idf:
   _SIZING_PERIODS = 'SIZINGPERIOD:DESIGNDAY'
   _LOCATION = 'SITE:LOCATION'
   _SIMPLE = 'Simple'
+  _EQUIPMENT_CONNECTIONS = 'ZONEHVAC:EQUIPMENTCONNECTIONS'
+  _NODE_LIST = 'NODELIST'
+  _BASEBOARD = 'ZONEHVAC:BASEBOARD:CONVECTIVE:ELECTRIC'
+  _AIR_TERMINAL_NO_REHEAT = 'AIRTERMINAL:SINGLEDUCT:CONSTANTVOLUME:NOREHEAT'
+  _AIR_DISTRIBUTION = 'ZONEHVAC:AIRDISTRIBUTIONUNIT'
+  _EQUIPMENT_LIST = 'ZONEHVAC:EQUIPMENTLIST'
+  _SIZING_ZONE = 'SIZING:ZONE'
+  _DESIGN_SPECIFICATION_OUTDOOR_AIR = 'DESIGNSPECIFICATION:OUTDOORAIR'
 
   idf_surfaces = {
     cte.WALL: 'wall',
@@ -117,7 +125,8 @@ class Idf:
     if levels_of_detail.construction is None:
       raise AttributeError('Level of detail of construction not assigned')
     if levels_of_detail.construction < 2:
-      raise AttributeError(f'Level of detail of construction = {levels_of_detail.construction}. Required minimum level 2')
+      raise AttributeError(
+        f'Level of detail of construction = {levels_of_detail.construction}. Required minimum level 2')
     if levels_of_detail.usage is None:
       raise AttributeError('Level of detail of usage not assigned')
     if levels_of_detail.usage < 2:
@@ -381,16 +390,80 @@ class Idf:
     )
 
   def _add_heating_system(self, thermal_zone, zone_name):
-    for air_system in self._idf.idfobjects[self._IDEAL_LOAD_AIR_SYSTEM]:
+    for air_system in self._idf.idfobjects[self._EQUIPMENT_CONNECTIONS]:
       if air_system.Zone_Name == zone_name:
         return
     thermostat = self._add_thermostat(thermal_zone)
-    self._idf.newidfobject(self._IDEAL_LOAD_AIR_SYSTEM,
+    self._idf.newidfobject(self._EQUIPMENT_CONNECTIONS,
                            Zone_Name=zone_name,
-                           System_Availability_Schedule_Name=f'HVAC AVAIL SCHEDULES {thermal_zone.usage_name}',
+                           Zone_Conditioning_Equipment_List_Name=f'{zone_name} Equipment List',
-                           Heating_Availability_Schedule_Name=f'HVAC AVAIL SCHEDULES {thermal_zone.usage_name}',
+                           Zone_Air_Inlet_Node_or_NodeList_Name=f'{zone_name} Inlet Node List',
-                           Cooling_Availability_Schedule_Name=f'HVAC AVAIL SCHEDULES {thermal_zone.usage_name}',
+                           Zone_Air_Node_Name=f'Node 1',
-                           Template_Thermostat_Name=thermostat.Name)
+                           Zone_Return_Air_Node_or_NodeList_Name=f'{zone_name} Return Node List')
+
+  def _add_nodelist_system(self, thermal_zone, zone_name):
+    self._idf.newidfobject(self._NODE_LIST,
+                           Name=f'{zone_name} Inlet Node List',
+                           Node_1_Name='Node 2')
+    self._idf.newidfobject(self._NODE_LIST,
+                           Name=f'{zone_name} Return Node List',
+                           Node_1_Name='Node 3')
+
+  def _add_baseboard_system(self, thermal_zone, zone_name):
+    for baseboard in self._idf.idfobjects[self._BASEBOARD]:
+      if baseboard.Zone_Name == zone_name:
+        return
+    self._idf.newidfobject(self._BASEBOARD, Name=f'Elec Baseboard',Availability_Schedule_Name='HVAC AVAIL')
+
+  def _add_air_terminal_system(self, thermal_zone, zone_name):
+    """for air_terminal in self._idf.idfobjects[self._AIR_TERMINAL_NO_REHEAT]:
+      if air_terminal.Zone_Name == zone_name:
+        return"""
+    self._idf.newidfobject(self._AIR_TERMINAL_NO_REHEAT, Name=f'Diffuser',
+                           Availability_Schedule_Name='HVAC AVAIL',
+                           Air_Inlet_Node_Name='Node 4',
+                           Air_Outlet_Node_Name='Node 2',
+                           Maximum_Air_Flow_Rate='AutoSize')
+
+  def _add_air_distribution_system(self, thermal_zone, zone_name):
+    for air_distribution in self._idf.idfobjects[self._AIR_DISTRIBUTION]:
+      if air_distribution.Zone_Name == zone_name:
+        return
+    self._idf.newidfobject(self._AIR_DISTRIBUTION,
+                           Name='ADU Diffuser',
+                           Air_Distribution_Unit_Outlet_Node_Name='Node 2',
+                           Air_Terminal_Object_Type='AirTerminal:SingleDuct:ConstantVolume:NoReheat',
+                           Air_Terminal_Name='Diffuser')
+
+  def _add_equipment_list_system(self, thermal_zone, zone_name):
+    for air_distribution in self._idf.idfobjects[self._EQUIPMENT_LIST]:
+      if air_distribution.Zone_Name == zone_name:
+        return
+    self._idf.newidfobject(self._EQUIPMENT_LIST,
+                           Name=f'{zone_name} Equipment List',
+                           Load_Distribution_Scheme='SequentialLoad',
+                           Zone_Equipment_1_Object_Type='ZoneHVAC:Baseboard:Convective:Electric',
+                           Zone_Equipment_1_Name='Elec Baseboard',
+                           Zone_Equipment_1_Cooling_Sequence='1',
+                           Zone_Equipment_1_Heating_or_NoLoad_Sequence='1',
+                           Zone_Equipment_2_Object_Type='ZoneHVAC:AirDistributionUnit',
+                           Zone_Equipment_2_Name='ADU Diffuser',
+                           Zone_Equipment_2_Cooling_Sequence='2',
+                           Zone_Equipment_2_Heating_or_NoLoad_Sequence='2'
+                           )
+
+  def _add_sizing_zone(self, thermal_zone, zone_name):
+    koa=self._idf.newidfobject(self._SIZING_ZONE,
+                               Zone_or_ZoneList_Name=f'{zone_name}',
+                               Zone_Cooling_Design_Supply_Air_Humidity_Ratio='0.0085',
+                               Zone_Heating_Design_Supply_Air_Humidity_Ratio='0.008'
+                               )
+
+  def _add_outdoor_air_design_specification(self, thermal_zone, zone_name):
+    self._idf.newidfobject(self._DESIGN_SPECIFICATION_OUTDOOR_AIR,
+                           Name='MidriseApartment Apartment Ventilation',
+                           Outdoor_Air_Method='Sum',
+                           Outdoor_Air_Flow_per_Person='0.0169901079552')
 
   def _add_occupancy(self, thermal_zone, zone_name):
     number_of_people = thermal_zone.occupancy.occupancy_density * thermal_zone.total_floor_area
@@ -553,10 +626,6 @@ class Idf:
             self._add_zone(thermal_zone, building.name)
             self._add_heating_system(thermal_zone, building.name)
             self._add_infiltration(thermal_zone, building.name)
-            self._add_ventilation(thermal_zone, building.name)
-            self._add_occupancy(thermal_zone, building.name)
-            self._add_lighting(thermal_zone, building.name)
-            self._add_appliances(thermal_zone, building.name)
             self._add_dhw(thermal_zone, building.name)
       if self._export_type == "Surfaces":
         if building.name in self._target_buildings or building.name in self._adjacent_buildings:
@@ -586,7 +655,6 @@ class Idf:
       Variable_Name="Water Use Equipment Heating Rate",
       Reporting_Frequency="Hourly",
     )
-
     # post-process to erase windows associated to adiabatic walls
     windows_list = []
     for window in self._idf.idfobjects[self._WINDOW]:
@@ -598,7 +666,6 @@ class Idf:
         windows_list.append(window)
     for window in windows_list:
       self._idf.removeidfobject(window)
-
     self._idf.saveas(str(self._output_file))
     return self._idf
 

hub/exports/building_energy/idf_files/Minimal.idf

@@ -13,7 +13,7 @@
 ! HVAC: None.
 !
 
-  Version,23.2;
+  Version,24.1;
 
   Timestep,4;
 
@@ -122,8 +122,8 @@
     No,                      !- Do Zone Sizing Calculation
     No,                      !- Do System Sizing Calculation
     No,                      !- Do Plant Sizing Calculation
-    No,                     !- Run Simulation for Sizing Periods
+    Yes,                     !- Run Simulation for Sizing Periods
-    Yes,                      !- Run Simulation for Weather File Run Periods
+    No,                      !- Run Simulation for Weather File Run Periods
     No,                      !- Do HVAC Sizing Simulation for Sizing Periods
     1;                       !- Maximum Number of HVAC Sizing Simulation Passes
 

hub/exports/building_energy/idf_files/Minimal9.5.idf

@@ -0,0 +1,157 @@
+! Minimal.idf
+! Basic file description: This is a minimal configuration necessary to run.
+! Highlights: Illustrates minimal items necessary to perform run.
+! BUILDING, SURFACEGEOMETRY, LOCATION and DESIGNDAY (or RUNPERIOD) are the absolute minimal required input objects.
+! TIME STEP IN HOUR is included so as to not get warning error.
+! Including two design days, Run Control object and RunPeriod to facilitate use.
+! Although not incredibly useful, this could be used as a weather/solar calculator.
+! Simulation Location/Run: Denver is included.  Any could be used.
+! Building: None.
+!
+! Internal gains description: None.
+!
+! HVAC: None.
+!
+
+  Version,9.5;
+
+  Timestep,4;
+
+  Building,
+    None,                    !- Name
+    0.0000000E+00,           !- North Axis {deg}
+    Suburbs,                 !- Terrain
+    0.04,                    !- Loads Convergence Tolerance Value {W}
+    0.40,                    !- Temperature Convergence Tolerance Value {deltaC}
+    FullInteriorAndExterior, !- Solar Distribution
+    25,                      !- Maximum Number of Warmup Days
+    6;                       !- Minimum Number of Warmup Days
+
+  GlobalGeometryRules,
+    UpperLeftCorner,         !- Starting Vertex Position
+    CounterClockWise,        !- Vertex Entry Direction
+    World;                   !- Coordinate System
+
+  Site:Location,
+    DENVER_STAPLETON_CO_USA_WMO_724690,  !- Name
+    39.77,                   !- Latitude {deg}
+    -104.87,                 !- Longitude {deg}
+    -7.00,                   !- Time Zone {hr}
+    1611.00;                 !- Elevation {m}
+
+ ! DENVER_STAPLETON_CO_USA Annual Heating Design Conditions Wind Speed=2.3m/s Wind Dir=180
+ ! Coldest Month=December
+ ! DENVER_STAPLETON_CO_USA Annual Heating 99.6%, MaxDB=-20°C
+
+  SizingPeriod:DesignDay,
+    DENVER_STAPLETON Ann Htg 99.6% Condns DB,  !- Name
+    12,                      !- Month
+    21,                      !- Day of Month
+    WinterDesignDay,         !- Day Type
+    -20,                     !- Maximum Dry-Bulb Temperature {C}
+    0.0,                     !- Daily Dry-Bulb Temperature Range {deltaC}
+    ,                        !- Dry-Bulb Temperature Range Modifier Type
+    ,                        !- Dry-Bulb Temperature Range Modifier Day Schedule Name
+    Wetbulb,                 !- Humidity Condition Type
+    -20,                     !- Wetbulb or DewPoint at Maximum Dry-Bulb {C}
+    ,                        !- Humidity Condition Day Schedule Name
+    ,                        !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir}
+    ,                        !- Enthalpy at Maximum Dry-Bulb {J/kg}
+    ,                        !- Daily Wet-Bulb Temperature Range {deltaC}
+    83411.,                  !- Barometric Pressure {Pa}
+    2.3,                     !- Wind Speed {m/s}
+    180,                     !- Wind Direction {deg}
+    No,                      !- Rain Indicator
+    No,                      !- Snow Indicator
+    No,                      !- Daylight Saving Time Indicator
+    ASHRAEClearSky,          !- Solar Model Indicator
+    ,                        !- Beam Solar Day Schedule Name
+    ,                        !- Diffuse Solar Day Schedule Name
+    ,                        !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) {dimensionless}
+    ,                        !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) {dimensionless}
+    0.00;                    !- Sky Clearness
+
+ ! DENVER_STAPLETON Annual Cooling Design Conditions Wind Speed=4m/s Wind Dir=120
+ ! Hottest Month=July
+ ! DENVER_STAPLETON_CO_USA Annual Cooling (DB=>MWB) .4%, MaxDB=34.1°C MWB=15.8°C
+
+  SizingPeriod:DesignDay,
+    DENVER_STAPLETON Ann Clg .4% Condns DB=>MWB,  !- Name
+    7,                       !- Month
+    21,                      !- Day of Month
+    SummerDesignDay,         !- Day Type
+    34.1,                    !- Maximum Dry-Bulb Temperature {C}
+    15.2,                    !- Daily Dry-Bulb Temperature Range {deltaC}
+    ,                        !- Dry-Bulb Temperature Range Modifier Type
+    ,                        !- Dry-Bulb Temperature Range Modifier Day Schedule Name
+    Wetbulb,                 !- Humidity Condition Type
+    15.8,                    !- Wetbulb or DewPoint at Maximum Dry-Bulb {C}
+    ,                        !- Humidity Condition Day Schedule Name
+    ,                        !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir}
+    ,                        !- Enthalpy at Maximum Dry-Bulb {J/kg}
+    ,                        !- Daily Wet-Bulb Temperature Range {deltaC}
+    83411.,                  !- Barometric Pressure {Pa}
+    4,                       !- Wind Speed {m/s}
+    120,                     !- Wind Direction {deg}
+    No,                      !- Rain Indicator
+    No,                      !- Snow Indicator
+    No,                      !- Daylight Saving Time Indicator
+    ASHRAEClearSky,          !- Solar Model Indicator
+    ,                        !- Beam Solar Day Schedule Name
+    ,                        !- Diffuse Solar Day Schedule Name
+    ,                        !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) {dimensionless}
+    ,                        !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) {dimensionless}
+    1.00;                    !- Sky Clearness
+
+  RunPeriod,
+    Run Period 1,            !- Name
+    1,                       !- Begin Month
+    1,                       !- Begin Day of Month
+    ,                        !- Begin Year
+    12,                      !- End Month
+    31,                      !- End Day of Month
+    ,                        !- End Year
+    Tuesday,                 !- Day of Week for Start Day
+    Yes,                     !- Use Weather File Holidays and Special Days
+    Yes,                     !- Use Weather File Daylight Saving Period
+    No,                      !- Apply Weekend Holiday Rule
+    Yes,                     !- Use Weather File Rain Indicators
+    Yes;                     !- Use Weather File Snow Indicators
+
+  SimulationControl,
+    No,                      !- Do Zone Sizing Calculation
+    No,                      !- Do System Sizing Calculation
+    No,                      !- Do Plant Sizing Calculation
+    No,                     !- Run Simulation for Sizing Periods
+    Yes,                      !- Run Simulation for Weather File Run Periods
+    No,                      !- Do HVAC Sizing Simulation for Sizing Periods
+    1;                       !- Maximum Number of HVAC Sizing Simulation Passes
+
+  Output:Table:SummaryReports, AnnualBuildingUtilityPerformanceSummary,
+    DemandEndUseComponentsSummary,
+    SensibleHeatGainSummary,
+    InputVerificationandResultsSummary,
+    AdaptiveComfortSummary,
+    Standard62.1Summary,
+    ClimaticDataSummary,
+    EquipmentSummary,
+    EnvelopeSummary,
+    LightingSummary,
+    HVACSizingSummary,
+    SystemSummary,
+    ComponentSizingSummary,
+    OutdoorAirSummary,
+    ObjectCountSummary,
+    EndUseEnergyConsumptionOtherFuelsMonthly,
+    PeakEnergyEndUseOtherFuelsMonthly;
+
+
+  OutputControl:Table:Style, CommaAndHTML,JtoKWH;
+
+  Output:Meter,DISTRICTHEATING:Facility,hourly;
+  Output:Meter,DISTRICTCOOLING:Facility,hourly;
+  Output:Meter,InteriorEquipment:Electricity,hourly;
+  Output:Meter,InteriorLights:Electricity,hourly;
+
+  OutputControl:IlluminanceMap:Style,
+     Comma;                                         !- Column separator

texttest

@@ -0,0 +1,142 @@
+ZoneControl:Thermostat,
+  Room_180_7ad8616b Thermostat,           !- Name
+  Room_180_7ad8616b,                      !- Zone or ZoneList Name
+  Room_180_7ad8616b Thermostat Schedule,  !- Control Type Schedule Name
+  ThermostatSetpoint:DualSetpoint,        !- Control 1 Object Type
+  LargeOffice Building_Setpoint 26,       !- Control 1 Name
+  ,                                       !- Control 2 Object Type
+  ,                                       !- Control 2 Name
+  ,                                       !- Control 3 Object Type
+  ,                                       !- Control 3 Name
+  ,                                       !- Control 4 Object Type
+  ,                                       !- Control 4 Name
+  0;                                      !- Temperature Difference Between Cutout And Setpoint {deltaC}
+
+Schedule:Compact,
+  Room_180_7ad8616b Thermostat Schedule,  !- Name
+  Room_180_7ad8616b Thermostat Schedule Type Limits, !- Schedule Type Limits Name
+  Through: 12/31,                         !- Field 1
+  For: AllDays,                           !- Field 2
+  Until: 24:00,                           !- Field 3
+  4;                                      !- Field 4
+
+ScheduleTypeLimits,
+  Room_180_7ad8616b Thermostat Schedule Type Limits, !- Name
+  0,                                      !- Lower Limit Value {BasedOnField A3}
+  4,                                      !- Upper Limit Value {BasedOnField A3}
+  DISCRETE;                               !- Numeric Type
+
+ThermostatSetpoint:DualSetpoint,
+  LargeOffice Building_Setpoint 26,       !- Name
+  LargeOffice Building_Setpoint_HtgSetp Schedule, !- Heating Setpoint Temperature Schedule Name
+  LargeOffice Building_Setpoint_ClgSetp Schedule; !- Cooling Setpoint Temperature Schedule Name
+
+ZoneHVAC:EquipmentConnections,
+  Room_180_7ad8616b,                      !- Zone Name
+  Room_180_7ad8616b Equipment List,       !- Zone Conditioning Equipment List Name
+  Room_180_7ad8616b Inlet Node List,      !- Zone Air Inlet Node or NodeList Name
+  ,                                       !- Zone Air Exhaust Node or NodeList Name
+  Node 27,                                !- Zone Air Node Name
+  Room_180_7ad8616b Return Node List;     !- Zone Return Air Node or NodeList Name
+
+NodeList,
+  Room_180_7ad8616b Inlet Node List,      !- Name
+  Node 305;                               !- Node Name 1
+
+NodeList,
+  Room_180_7ad8616b Return Node List,     !- Name
+  Node 308;                               !- Node Name 1
+
+ZoneHVAC:Baseboard:Convective:Electric,
+  Elec Baseboard 1,                       !- Name
+  Always On Discrete hvac_library,        !- Availability Schedule Name
+  ,                                       !- Heating Design Capacity Method
+  Autosize,                               !- Heating Design Capacity {W}
+  ,                                       !- Heating Design Capacity Per Floor Area {W/m2}
+  ,                                       !- Fraction of Autosized Heating Design Capacity
+  1;                                      !- Efficiency
+
+AirTerminal:SingleDuct:ConstantVolume:NoReheat,
+  Diffuser 21,                            !- Name
+  Always On Discrete hvac_library,        !- Availability Schedule Name
+  Node 307,                               !- Air Inlet Node Name
+  Node 305,                               !- Air Outlet Node Name
+  AutoSize;                               !- Maximum Air Flow Rate {m3/s}
+
+ZoneHVAC:AirDistributionUnit,
+  ADU Diffuser 21,                        !- Name
+  Node 305,                               !- Air Distribution Unit Outlet Node Name
+  AirTerminal:SingleDuct:ConstantVolume:NoReheat, !- Air Terminal Object Type
+  Diffuser 21;                            !- Air Terminal Name
+
+ZoneHVAC:EquipmentList,
+  Room_180_7ad8616b Equipment List,       !- Name
+  SequentialLoad,                         !- Load Distribution Scheme
+  ZoneHVAC:Baseboard:Convective:Electric, !- Zone Equipment Object Type 1
+  Elec Baseboard 1,                       !- Zone Equipment Name 1
+  1,                                      !- Zone Equipment Cooling Sequence 1
+  1,                                      !- Zone Equipment Heating or No-Load Sequence 1
+  ,                                       !- Zone Equipment Sequential Cooling Fraction Schedule Name 1
+  ,                                       !- Zone Equipment Sequential Heating Fraction Schedule Name 1
+  ZoneHVAC:AirDistributionUnit,           !- Zone Equipment Object Type 2
+  ADU Diffuser 21,                        !- Zone Equipment Name 2
+  2,                                      !- Zone Equipment Cooling Sequence 2
+  2,                                      !- Zone Equipment Heating or No-Load Sequence 2
+  ,                                       !- Zone Equipment Sequential Cooling Fraction Schedule Name 2
+  ;                                       !- Zone Equipment Sequential Heating Fraction Schedule Name 2
+
+Sizing:Zone,
+  Room_180_7ad8616b,                      !- Zone or ZoneList Name
+  SupplyAirTemperature,                   !- Zone Cooling Design Supply Air Temperature Input Method
+  14,                                     !- Zone Cooling Design Supply Air Temperature {C}
+  11.11,                                  !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
+  SupplyAirTemperature,                   !- Zone Heating Design Supply Air Temperature Input Method
+  40,                                     !- Zone Heating Design Supply Air Temperature {C}
+  11.11,                                  !- Zone Heating Design Supply Air Temperature Difference {deltaC}
+  0.0085,                                 !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
+  0.008,                                  !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
+  Room_180_7ad8616b DSOA Space List,      !- Design Specification Outdoor Air Object Name
+  ,                                       !- Zone Heating Sizing Factor
+  ,                                       !- Zone Cooling Sizing Factor
+  DesignDay,                              !- Cooling Design Air Flow Method
+  0,                                      !- Cooling Design Air Flow Rate {m3/s}
+  0.000762,                               !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
+  0,                                      !- Cooling Minimum Air Flow {m3/s}
+  0,                                      !- Cooling Minimum Air Flow Fraction
+  DesignDay,                              !- Heating Design Air Flow Method
+  0,                                      !- Heating Design Air Flow Rate {m3/s}
+  0.002032,                               !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
+  0.1415762,                              !- Heating Maximum Air Flow {m3/s}
+  0.3,                                    !- Heating Maximum Air Flow Fraction
+  ,                                       !- Design Specification Zone Air Distribution Object Name
+  No,                                     !- Account for Dedicated Outdoor Air System
+  ,                                       !- Dedicated Outdoor Air System Control Strategy
+  ,                                       !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
+  ,                                       !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
+  Sensible Load Only No Latent Load,      !- Zone Load Sizing Method
+  HumidityRatioDifference,                !- Zone Latent Cooling Design Supply Air Humidity Ratio Input Method
+  ,                                       !- Zone Dehumidification Design Supply Air Humidity Ratio {kgWater/kgDryAir}
+  0.005,                                  !- Zone Cooling Design Supply Air Humidity Ratio Difference {kgWater/kgDryAir}
+  HumidityRatioDifference,                !- Zone Latent Heating Design Supply Air Humidity Ratio Input Method
+  ,                                       !- Zone Humidification Design Supply Air Humidity Ratio {kgWater/kgDryAir}
+  0.005;                                  !- Zone Humidification Design Supply Air Humidity Ratio Difference {kgWater/kgDryAir}
+
+DesignSpecification:OutdoorAir:SpaceList,
+  Room_180_7ad8616b DSOA Space List,      !- Name
+  Room_180_7ad8616b_Space,                !- Space Name 1
+  MidriseApartment Apartment Ventilation; !- Space Design Specification Outdoor Air Object Name 1
+
+Zone,
+  Room_181_3a411b5d,                      !- Name
+  ,                                       !- Direction of Relative North {deg}
+  0,                                      !- X Origin {m}
+  0,                                      !- Y Origin {m}
+  0,                                      !- Z Origin {m}
+  ,                                       !- Type
+  1,                                      !- Multiplier
+  4,                                      !- Ceiling Height {m}
+  291.62935408288,                        !- Volume {m3}
+  ,                                       !- Floor Area {m2}
+  ,                                       !- Zone Inside Convection Algorithm
+  ,                                       !- Zone Outside Convection Algorithm
+  Yes;                                    !- Part of Total Floor Area