!The DOE Prototype Building Models were developed by Pacific Northwest National Laboratory (PNNL), under contract with the U.S. !Department of Energy (DOE). These building models were derived from DOE's Commercial Reference Building Models with modifications !based on input from the ASHRAE Standard 90.1 committee, the Advanced Energy Design Guide series, and building industry experts. The !prototypes models were developed to quantify energy saving impacts from newly published editions of ASHRAE Standard 90.1, 189.1, IECC, !and other energy codes and standards. The basic building descriptions can be found in the Scorecards posted at www.energycodes.gov !website. The recommended citation of the prototype models is ! !DOE and PNNL. 2020. Commercial Prototype Building Models, Richland, WA, Pacific Northwest National Laboratory. Available at https://www.energycodes.gov/development/commercial/prototype_models. ! !Detailed descriptions of the prototype model development and addenda modeling strategies can be found in the following reports: !DOE, 2020. Preliminary Energy Savings Analysis: ANSI/ASHRAE/IES Standard 90.1-2019. Report prepared by Zhang, J., M. Rosenberg, J. !Lerond, Y. Xie, Nambia, C., Y. Chen, R. Hart, M. Halverson, D. Maddox, and S. Goel, Richland, WA, Pacific Northwest National Laboratory. ! !Zhang, J., Y. Chen, Y. Xie, M. Rosenberg, R. Hart. Energy and Energy Cost Savings Analysis of the 2018 IECC for Commercial Buildings. !2018. PNNL-28125. Richland, WA: Pacific Northwest National Laboratory. ! !DOE. 2017. Energy Savings Analysis: ANSI/ASHRAE/IES Standard 90.1-2016. Prepared by Athalye, R.A, M.A. Halverson, M.I. Rosenberg, B. Liu, !J. Zhang, R. Hart, V.V. Mendon, S. Goel, Y. Chen, Y. Xie, and M. Zhao, Richland, WA, Pacific Northwest National Laboratory. https://www.energycodes.gov/sites/default/files/documents/02202018_Standard_90.1-2016_Determination_TSD.pdf. ! !Zhang, J., Y. Xie, R.A. Athalye, J. Zhuge, M. Rosenberg, R. Hart, and B. Liu. Energy and Energy Cost Savings Analysis of the 2015 IECC !for Commercial Buildings. 2015. PNNL-24269 Rev. 1. Richland, WA: Pacific Northwest National !Laboratory. https://www.energycodes.gov/sites/default/files/documents/2015_IECC_Commercial_Analysis.pdf. ! !Halverson M.A., M.I. Rosenberg, W. Wang, J. Zhang, V.V. Mendon, R.A. Athalye, Y. Xie, R. Hart, S. Goel, 2014. ANSI/ASHRAE/IES Standard !90.1-2013 Determination of Energy Savings: Quantitative Analysis, PNNL-23479. Richland, WA: Pacific Northwest National Laboratory. https://www.energycodes.gov/sites/default/files/documents/901-2013_finalCommercialDeterminationQuantitativeAnalysis_TSD_0.pdf. ! !Goel S., R.A. Athalye, W. Wang, J. Zhang, M.I. Rosenberg, Y. Xie, and R. Hart, et al. 2014. Enhancements to ASHRAE Standard 90.1 !Prototype Building Models. PNNL-23269. Richland, WA: Pacific Northwest National Laboratory. https://www.pnnl.gov/main/publications/external/technical_reports/PNNL-23269.pdf. ! !Zhang J., R.A. Athalye, R. Hart, M.I. Rosenberg, Y. Xie, S. Goel, and V.V. Mendon, et al. 2013. Energy and Energy Cost Savings Analysis !of the IECC for Commercial Buildings. PNNL-22760. Richland, WA: Pacific Northwest National Laboratory. http://www.pnnl.gov/main/publications/external/technical_reports/PNNL-22760.pdf. ! !Thornton B.A., M.I. Rosenberg, E.E. Richman, W. Wang, Y. Xie, J. Zhang, H. Cho, VV Mendon, R.A. Athalye, and B. Liu. 2011. Achieving !the 30% Goal: Energy and Cost Savings Analysis of ASHRAE Standard 90.1-2010. PNNL-20405. Richland, WA: Pacific Northwest National !Laboratory. https://www.energycodes.gov/sites/default/files/documents/BECP_Energy_Cost_Savings_STD2010_May2011_v00.pdf. ! ! ! WeatherFile: USA_MN_Rochester.Intl.AP.726440_TMY3.epw ! GPARM parameters as input: ! Case = ASHRAE901_Hospital_STD2019_Rochester ! SelectedCase = ! basement_tempt = Zone6A_nonres_R10_Hospital_Rochester_STD2016_out.idf ! annual_run = no ! avg_oa_tempt_ip = 43.475 ! maxdiff_oa_tempt_ip = 60.3 ! ext_wall_type = MassWall ! res_ext_wall_ufactor = 0.403156673 ! nonres_ext_wall_ufactor = 0.45426104 ! roof_type = MetalDeckRoof ! nonres_roof_ufactor = 0.181704416 ! roof_emissivity = 0.9 ! roof_solar_absorp = 0.7 ! res_window = Window_U_0.38_SHGC_0.41 ! nonres_window = Window_U_0.38_SHGC_0.41 ! res_east_window = Window_U_0.42_SHGC_0.40 ! nonres_east_window = Window_U_0.42_SHGC_0.40 ! sidelighting_control = yes_AY ! exterior_lights_watts = 9863 ! cc_sa_humidity = 0.0085 ! condenser_pump_head = 148556.6249 ! chilledwater_pump_head = 44761.27683 ! chilledwater_pump_secondary_head = 134283.8305 ! LPD1_Office = 6.888902667 ! LPD2_ER = 15.06947458 ! LPD3_Record = 8.794114811 ! LPD4_Corridor = 7.642376396 ! LPD5_NurseStn_Lobby1 = 11.17293901 ! LPD6_OR = 24.32643754 ! LPD7_IC = 13.45488802 ! LPD8_NursStn = 12.59377519 ! LPD9_NurseStn_Lobby2 = 10.46252093 ! LPD10_Patient_Room = 7.319459084 ! LPD11_Physical_Therapy = 9.795158479 ! LPD12_Lab = 14.31600085 ! LPD13_Radiology = 10.11807579 ! LPD14_Dining = 4.305564167 ! LPD15_Kitchen = 11.73266235 ! avg_oa_tempt = 6.375 ! maxdiff_oa_tempt = 33.5 ! infil = 0.00056896 ! oa_basement = 0.000368277 ! oa_exam = 0.002370219 ! oa_office1_flr1 = 0.00048257 ! oa_lobby = 0.000338645 ! oa_corridor = 0.000304781 ! oa_nurse = 0.000338645 ! oa_or = 0.003555179 ! oa_ic = 0.002370237 ! oa_patient = 0.002370237 ! oa_therapy = 0.000380976 ! oa_lab = 0.001168327 ! oa_radiology = 0.000380976 ! oa_dining = 0.001295319 ! oa_kitchen = 0.00080005 ! oa_office_flr5 = 0.00048257 ! tsa_exam = 0.01422212 ! tsa_or = 0.017776903 ! tsa_ic = 0.007111113 ! tsa_patient = 0.007111113 ! SAT_reset_switch = Yes ! SAT_reset_T = 15.6 ! VAV_ICU_ERV = Yes ! VAV_PATRMS_ERV = Yes ! Economizer_NoHumidification = DifferentialDryBulb ! economizer_lockout = LockoutWithHeating ! eco_max_temp_limit = na ! heating_damper_act = ReverseWithLimits ! add_ck_vav_1 = Yes ! add_ck_vav_2 = Yes ! basement_mdp = 0.2 ! corridor_flr_1_mdp = 0.2 ! corridor_flr_2_mdp = 0.2 ! er_nursestn_lobby_flr_1_mdp = 0.2 ! icu_nursestn_lobby_flr_2_mdp = 0.2 ! lobby_records_flr_1_mdp = 0.2 ! office1_mult4_flr_1_mdp = 0.2 ! or_nursestn_lobby_flr_2_mdp = 0.2 ! corridor_flr_5_mdp = 0.2 ! corridor_nw_flr_3_mdp = 0.2 ! corridor_nw_flr_4_mdp = 0.2 ! corridor_se_flr_3_mdp = 0.2 ! corridor_se_flr_4_mdp = 0.2 ! dining_flr_5_mdp = 0.2 ! nursestn_lobby_flr_3_mdp = 0.2 ! nursestn_lobby_flr_4_mdp = 0.2 ! nursestn_lobby_flr_5_mdp = 0.2 ! office1_flr_5_mdp = 0.2 ! office2_mult5_flr_5_mdp = 0.2 ! office3_flr_5_mdp = 0.2 ! office4_mult6_flr_5_mdp = 0.2 ! phystherapy_flr_3_mdp = 0.2 ! radiology_flr_4_mdp = 0.2 ! vav_1_oaf = autosize ! vav_2_oaf = autosize ! Transfer_Air = kitchen_only ! BLDG_ELEVATORS_LIGHTS_FAN_SCH = ELEV_LIGHT_FAN_SCH_ADD_DF ! BLDG_ELEVATORS_LIGHTS_FAN_POWER = 501 ! bsmt_new = National_Hospital_ASHRAE901_STD2016_Zone6A_nonres_MN-Rochester-MN_out.idf ! osc_key_wall = surfPropOthSdCoefBasementAvgWall ! osc_key_floor = surfPropOthSdCoefBasementAvgFloor ! orientation = -90 ! BLDG_EQUIP_SCH = BLDG_EQUIP_SCH_ADV ! minSysAirFlowRatio = 0.5 ! VAVReheat_flag = yes ! VAVReheat_minAirFrac = 0.5 ! PumpCurve_flag = pump_ride_on_curve ! pv_generator = no ! pv_surface_area = 0 ! STD189_overhang = no ! overhang_pf_ew_TBD = 0 ! swh_et = 0.802764686 ! swh_ua = 15.60100708 ! ext_lgt_sch = Exterior_Lgt_ALWAYS_ON ! VAV_1_ERV = Yes ! VAV_2_ERV = No ! VAV_ER_ERV = No ! VAV_OR_ERV = No ! VAV_LABS_ERV = No ! VAV_ICU_ERV_power = 1539.37265225 ! VAV_PATRMS_ERV_power = 3273.229555 ! VAV_1_ERV_power = 3154.26375 ! VAV_2_ERV_power = 3263.9695 ! VAV_ER_ERV_power = 713.572987 ! VAV_OR_ERV_power = 1614.071075 ! VAV_LABS_ERV_power = 493.9029 ! LTG_SCH_SET = LTG_SET_STD2013 ! transformer_size = 500000 ! transformer_eff = 0.991 ! freezer_power = 555 ! refrigerator_power = 470 ! swh_et_booster = 1 ! swh_ua_booster = 1.053159296 ! swh_et_laundry = 0.803988738 ! swh_ua_laundry = 11.25413987 ! pipe_heat_loss = 17147.66 ! evap_fan_power_case1 = 19.71428571 ! evap_fan_power_case2 = 19.14285714 ! walkin_lighting_sch = walkin_occ_lght_sch ! add_as = yes ! preheatcoil_exists = yes ! AddendumAF_TowerFan = Yes ! kitchen_exh_fan_power = 1219 ! skip_EMSprogram = yes ! BoilerAM = Yes ! Wfile_TMY3 = USA_MN_Rochester.Intl.AP.726440_TMY3.epw ! loadProfile = No ! addendum_DI = yes ! addendum_DV = yes ! receptacle_ctrl_occ_reduction_frac = 0.974001829 ! receptacle_ctrl_unocc_reduction_frac = 0.873170566 ! OR_VAV_zone_mdp = 0.2 ! HOTW_ST_Reset = No ! CHW_ST_Reset = No ! CodeName = ASHRAE90.1_STD2019 ! CZ_City_Old = Burlington ! CZ_Label = 6A ! con_swingdoor_r = 0.475963827 ! con_overheaddoor_r = 0.567741935 ! CHW_deltaT = 8.33 ! HOTW_PumpCurve_flag = pump_ride_on_curve ! nonres_window_u_factor = 0.34 ! nonres_window_shgc = 0.38 ! nonresLSG = 1.1 ! res_window_u_factor = 0.34 ! res_window_shgc = 0.38 ! resLSG = 1.1 ! nonres_east_window_u_factor = 0.34 ! nonres_east_window_shgc = 0.38 ! nonres_eastLSG = 1.1 ! res_east_window_u_factor = 0.34 ! res_east_window_shgc = 0.38 ! res_eastLSG = 1.1 ! AnalysisPurpose = ProgressIndicator ! AnalysisCodeName = ASHRAE901 ! AnalysisCodeYear = 2019 ! AnalysisAmendment = NoneAmend ! AnalysisPrototype = Hospital ! AnalysisScope = National ! AnalysisState = National ! AnalysisClimateZone = 6A ! AnalysisCity = USA_MN_Rochester ! var_Ffactor_IP = 0.51 ! var_Cfactor_IP = 0.092 ! cop_walkin_freezer = 2.3 ! cop_walkin_cooler = 6.93 ! specify overhang_pf for 1891 codes !- =========== ALL OBJECTS IN CLASS: VERSION =========== Version,9.0; !- =========== ALL OBJECTS IN CLASS: BUILDING =========== Building, Hospital, !- Name -90, !- North Axis {deg} City, !- Terrain 0.0400, !- Loads Convergence Tolerance Value 0.2000, !- Temperature Convergence Tolerance Value {deltaC} FullInteriorAndExterior, !- Solar Distribution 25, !- Maximum Number of Warmup Days 6; !- Minimum Number of Warmup Days !- =========== ALL OBJECTS IN CLASS: TIMESTEP IN HOUR =========== Timestep,6; !- =========== ALL OBJECTS IN CLASS: SYSTEM CONVERGENCE LIMITS =========== ConvergenceLimits, 1, !- Minimum System Timestep {minutes} 20; !- Maximum HVAC Iterations !- =========== ALL OBJECTS IN CLASS: INSIDE CONVECTION ALGORITHM =========== SurfaceConvectionAlgorithm:Inside,TARP; !- =========== ALL OBJECTS IN CLASS: OUTSIDE CONVECTION ALGORITHM =========== SurfaceConvectionAlgorithm:Outside,TARP; !- =========== ALL OBJECTS IN CLASS: SOLUTION ALGORITHM =========== HeatBalanceAlgorithm,ConductionTransferFunction; !- =========== ALL OBJECTS IN CLASS: SHADOWING CALCULATIONS =========== ShadowCalculation, AverageOverDaysInFrequency, !- Calculation Method 30; !- Calculation Frequency !- =========== ALL OBJECTS IN CLASS: RUN CONTROL =========== SimulationControl, Yes, !- Do Zone Sizing Calculation Yes, !- Do System Sizing Calculation Yes, !- Do Plant Sizing Calculation No, !- Run Simulation for Sizing Periods YES; !- Run Simulation for Weather File Run Periods !- =========== ALL OBJECTS IN CLASS: RUNPERIOD =========== RunPeriod, , !- Name 1, !- Begin Month 1, !- Begin Day of Month , !- Begin Year 12, !- End Month 31, !- End Day of Month , !- End Year Sunday, !- Day of Week for Start Day No, !- Use Weather File Holidays and Special Days No, !- Use Weather File Daylight Saving Period No, !- Apply Weekend Holiday Rule Yes, !- Use Weather File Rain Indicators Yes; !- Use Weather File Snow Indicators !- =========== ALL OBJECTS IN CLASS: SPECIALDAYPERIOD =========== ! US National Holidays RunPeriodControl:SpecialDays, New Years Day, !- Name January 1, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Veterans Day, !- Name November 11, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Christmas, !- Name December 25, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Independence Day, !- Name July 4, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, MLK Day, !- Name 3rd Monday in January, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Presidents Day, !- Name 3rd Monday in February, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Memorial Day, !- Name Last Monday in May, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Labor Day, !- Name 1st Monday in September, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Columbus Day, !- Name 2nd Monday in October, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Thanksgiving, !- Name 4th Thursday in November,!- Start Date 1, !- Duration {days} Holiday; !- Special Day Type !- =========== ALL OBJECTS IN CLASS: DAYLIGHTSAVINGPERIOD =========== ! Daylight Saving Period in US RunPeriodControl:DaylightSavingTime, 2nd Sunday in March, !- Start Date 1st Sunday in November; !- End Date !- =========== ALL OBJECTS IN CLASS: LOCATION =========== ! Site:Location and design-day objects created by: ! ../../_p.bin/ddy2idf /projects/bigsim/weather/EnergyPlus/tmy3.new/all/USA_MN_Rochester.Intl.AP.726440_TMY3.ddy ! Site:Location, Rochester International Arpt_MN_USA Design_Conditions, !- Site:Location Name 43.90, !- Latitude {N+ S-} -92.50, !- Longitude {W- E+} -6.00, !- Time Zone Relative to GMT {GMT+/-} 398.00; !- Elevation {m} SizingPeriod:DesignDay, Rochester International Arpt Ann Htg 99.6% Condns DB, !- Name 1, !- Month 21, !- Day of Month WinterDesignDay,!- Day Type -26.2, !- Maximum Dry-Bulb Temperature {C} 0.0, !- Daily Dry-Bulb Temperature Range {C} DefaultMultipliers, !- Dry-Bulb Temperature Range Modifier Type , !- Dry-Bulb Temperature Range Modifier Schedule Name Wetbulb, !- Humidity Condition Type -26.2, !- Wetbulb at Maximum Dry-Bulb {C} , !- Humidity Indicating Day Schedule Name , !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir} , !- Enthalpy at Maximum Dry-Bulb {J/kg} , !- Daily WetBulb Temperature Range {deltaC} 96634., !- Barometric Pressure {Pa} 5.7, !- Wind Speed {m/s} design conditions vs. traditional 6.71 m/s (15 mph) 310, !- Wind Direction {Degrees; N=0, S=180} No, !- Rain {Yes/No} No, !- Snow on ground {Yes/No} No, !- Daylight Savings Time Indicator ASHRAEClearSky, !- Solar Model Indicator , !- Beam Solar Day Schedule Name , !- Diffuse Solar Day Schedule Name , !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) , !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) 0.00; !- Clearness {0.0 to 1.1} SizingPeriod:DesignDay, Rochester International Arpt Ann Clg .4% Condns DB=>MWB, !- Name 7, !- Month 21, !- Day of Month SummerDesignDay,!- Day Type 31.2, !- Maximum Dry-Bulb Temperature {C} 10.6, !- Daily Dry-Bulb Temperature Range {C} DefaultMultipliers, !- Dry-Bulb Temperature Range Modifier Type , !- Dry-Bulb Temperature Range Modifier Schedule Name Wetbulb, !- Humidity Condition Type 23.1, !- Wetbulb at Maximum Dry-Bulb {C} , !- Humidity Indicating Day Schedule Name , !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir} , !- Enthalpy at Maximum Dry-Bulb {J/kg} , !- Daily WetBulb Temperature Range {deltaC} 96634., !- Barometric Pressure {Pa} 6.7, !- Wind Speed {m/s} design conditions vs. traditional 3.35 m/s (7mph) 200, !- Wind Direction {Degrees; N=0, S=180} No, !- Rain {Yes/No} No, !- Snow on ground {Yes/No} No, !- Daylight Savings Time Indicator ASHRAETau, !- Solar Model Indicator , !- Beam Solar Day Schedule Name , !- Diffuse Solar Day Schedule Name 0.404, !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) 2.226; !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) !- =========== ALL OBJECTS IN CLASS: WATER MAINS TEMPERATURES =========== Site:WaterMainsTemperature, Correlation, !- Calculation Method , !- Temperature Schedule Name 6.375, !- Annual average outdoor air temperature {C} 33.5; !- Maximum difference in monthly average outdoor air temperatures {C} !- =========== ALL OBJECTS IN CLASS: Site:GroundTemperature:FCfactorMethod =========== Site:GroundTemperature:FCfactorMethod, 7.4, !- January Ground Temperature {C} -0.0, !- February Ground Temperature {C} -7.6, !- March Ground Temperature {C} -12.6, !- April Ground Temperature {C} -7.7, !- May Ground Temperature {C} 0.3, !- June Ground Temperature {C} 7.0, !- July Ground Temperature {C} 14.2, !- August Ground Temperature {C} 19.2, !- September Ground Temperature {C} 20.9, !- October Ground Temperature {C} 20.0, !- November Ground Temperature {C} 15.4; !- December Ground Temperature {C} !- =========== ALL OBJECTS IN CLASS: MATERIAL:REGULAR-R =========== Material:NoMass, Opaque Door panel_con, !- Name MediumRough, !- Roughness 0.475963827, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Overhead Door_con Panel, !- Name MediumRough, !- Roughness 0.567741935, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance !- =========== ALL OBJECTS IN CLASS: CONSTRUCTION =========== Construction, Swinging Door_con, !- Name Opaque Door panel_con; !- Outside Layer Construction, Overhead Door_con, !- Name Overhead Door_con Panel; !- Outside Layer !- =========== Opaque Constructions =========== ! !- =========== ALL OBJECTS IN CLASS: MATERIAL:REGULAR =========== Material, Std Wood 6inch, !- Name MediumSmooth, !- Roughness 0.15, !- Thickness {m} 0.12, !- Conductivity {W/m-K} 540.0000, !- Density {kg/m3} 1210, !- Specific Heat {J/kg-K} 0.9000000, !- Thermal Absorptance 0.7000000, !- Solar Absorptance 0.7000000; !- Visible Absorptance Material, AC02 Acoustic Ceiling, !- Name MediumSmooth, !- Roughness 1.2700000E-02, !- Thickness {m} 5.7000000E-02, !- Conductivity {W/m-K} 288.0000, !- Density {kg/m3} 1339.000, !- Specific Heat {J/kg-K} 0.9000000, !- Thermal Absorptance 0.7000000, !- Solar Absorptance 0.2000000; !- Visible Absorptance Material, F07 25mm stucco, !- Name Smooth, !- Roughness 0.0254, !- Thickness {m} 0.72, !- Conductivity {W/m-K} 1856, !- Density {kg/m3} 840, !- Specific Heat {J/kg-K} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material, F08 Metal surface, !- Name Smooth, !- Roughness 0.0008, !- Thickness {m} 45.28, !- Conductivity {W/m-K} 7824, !- Density {kg/m3} 500; !- Specific Heat {J/kg-K} Material, F08 Metal roof surface, !- Name Smooth, !- Roughness 0.0008, !- Thickness {m} 45.28, !- Conductivity {W/m-K} 7824, !- Density {kg/m3} 500, !- Specific Heat {J/kg-K} 0.9, !- Absorptance:Thermal 0.7; !- Absorptance:Solar Material, F12 Asphalt shingles, !- Name VeryRough, !- Roughness 0.0032, !- Thickness {m} 0.04, !- Conductivity {W/m-K} 1120, !- Density {kg/m3} 1260, !- Specific Heat {J/kg-K} 0.9, !- Absorptance:Thermal 0.7; !- Absorptance:Solar Material, F13 Built-up roofing, !- Name Rough, !- Roughness 0.0095, !- Thickness {m} 0.16, !- Conductivity {W/m-K} 1120, !- Density {kg/m3} 1460, !- Specific Heat {J/kg-K} 0.9, !- Absorptance:Thermal 0.7; !- Absorptance:Solar Material, G01 13mm gypsum board, !- Name Smooth, !- Roughness 0.0127, !- Thickness {m} 0.1600, !- Conductivity {W/m-K} 800.0000, !- Density {kg/m3} 1090.0000, !- Specific Heat {J/kg-K} 0.9000, !- Absorptance:Thermal 0.7000, !- Absorptance:Solar 0.5000; !- Absorptance:Visible Material, G01 16mm gypsum board, !- Name MediumSmooth, !- Roughness 0.0159, !- Thickness {m} 0.16, !- Conductivity {W/m-K} 800, !- Density {kg/m3} 1090; !- Specific Heat {J/kg-K} Material, G02 16mm plywood, !- Name Smooth, !- Roughness 0.0159, !- Thickness {m} 0.12, !- Conductivity {W/m-K} 544, !- Density {kg/m3} 1210; !- Specific Heat {J/kg-K} Material, M14 150mm heavyweight concrete roof, !- Name MediumRough, !- Roughness 0.1524, !- Thickness {m} 2.31, !- Conductivity {W/m-K} 2322, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, 100mm Normalweight concrete wall, !- Name - based on 90.1-2004 Appendix-Table A3-1B MediumRough, !- Roughness 0.1016, !- Thickness {m} 2.31, !- Conductivity {W/m-K} 2322, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, 200mm Normalweight concrete wall, !- Name - based on 90.1-2004 Appendix-Table A3-1B MediumRough, !- Roughness 0.2032, !- Thickness {m} 2.31, !- Conductivity {W/m-K} 2322, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, 100mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B MediumRough, !- Roughness 0.1016, !- Thickness {m} 2.31, !- Conductivity {W/m-K} 2322, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, 150mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B MediumRough, !- Roughness 0.1524, !- Thickness {m} 2.31, !- Conductivity {W/m-K} 2322, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, 200mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B MediumRough, !- Roughness 0.2032, !- Thickness {m} 2.31, !- Conductivity {W/m-K} 2322, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, M10 200mm concrete block wall, !- Name MediumRough, !- Roughness 0.2032, !- Thickness {m} 0.72, !- Conductivity {W/m-K} 800, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, M10 200mm concrete block basement wall, !- Name MediumRough, !- Roughness 0.2032, !- Thickness {m} 1.326, !- Conductivity {W/m-K} 1842, !- Density {kg/m3} 912; !- Specific Heat {J/kg-K} Material:NoMass, CP02 CARPET PAD, !- Name VeryRough, !- Roughness 0.21648, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.8; !- Visible Absorptance Material:NoMass, Air_Wall_Material, !- Name Rough, !- Roughness 0.2079491, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7; !- Solar Absorptance Material:NoMass, Nonres_Roof_Insulation, !- Name MediumSmooth, !- Roughness 5.30668495131472, !- Thermal Resistance {m2-K/W} 0.9, !- Absorptance:Thermal 0.7, !- Absorptance:Solar 0.7; !- Absorptance:Visible Material:NoMass, Res_Roof_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Semiheated_Roof_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Nonres_Exterior_Wall_Insulation, !- Name MediumSmooth, !- Roughness 1.88434339518544, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Res_Exterior_Wall_Insulation, !- Name MediumSmooth, !- Roughness 2.16339123820601, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Semiheated_Exterior_Wall_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Nonres_Floor_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Res_Floor_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Semiheated_Floor_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Std Opaque Door Panel, !- Name MediumRough, !- Roughness 0.123456790123457, !- (corresponds to default RSI-0.12327 or R-0.7) Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance !- =========== ALL OBJECTS IN CLASS: CONSTRUCTION =========== Construction, InteriorFurnishings, !- Name Std Wood 6inch; !- Outside Layer Construction, Air_Wall, !- Name Air_Wall_Material; !- Outside Layer Construction, DropCeiling, !- Name AC02 Acoustic Ceiling; !- Outside Layer Construction, OpaqueDoor, !- Name Std Opaque Door Panel; !- Outside Layer Construction, AtticRoofDeck, !- Name F12 Asphalt shingles, !- Outside Layer G02 16mm plywood; !- Layer 2 Construction, int_wall, !- Name G01 13mm gypsum board, !- Outside Layer G01 13mm gypsum board; !- Layer 2 Construction, ext_slab_8in_with_carpet,!- Name 200mm Normalweight concrete floor, !- Outside Layer CP02 CARPET PAD; !- Layer 2 Construction, ext_slab_8in, !- Name 200mm Normalweight concrete floor; !- Outside Layer Construction, ext_slab_6in_with_carpet,!- Name 150mm Normalweight concrete floor, !- Outside Layer CP02 CARPET PAD; !- Layer 2 Construction, ext_slab_6in, !- Name 150mm Normalweight concrete floor; !- Outside Layer Construction, int_slab_floor, !- Name 100mm Normalweight concrete floor, !- Outside Layer CP02 CARPET PAD; !- Layer 2 Construction, int_slab_ceiling, !- Name CP02 CARPET PAD, !- Outside Layer 100mm Normalweight concrete floor; !- Layer 2 Construction, basement_wall, !- Name M10 200mm concrete block basement wall; !- Outside Layer Construction, int_wood_floor, !- Name AC02 Acoustic Ceiling, !- Outside Layer G02 16mm plywood, !- Layer 2 CP02 CARPET PAD; !- Layer 3 Construction, ext_soffit_floor, !- Name G02 16mm plywood; !- Outside Layer Construction, nonres_roof, !- Name F13 Built-up roofing, !- Outside Layer Nonres_Roof_Insulation, !- Layer #2 F08 Metal surface; !- Layer #3 Construction, res_roof, !- Name F13 Built-up roofing, !- Outside Layer Res_Roof_Insulation, !- Layer #2 F08 Metal surface; !- Layer #3 Construction, semiheated_roof, !- Name F13 Built-up roofing, !- Outside Layer Semiheated_Roof_Insulation, !- Layer #2 F08 Metal surface; !- Layer #3 Construction, nonres_ext_wall, !- Name 200mm Normalweight concrete wall, !- Outside Layer Nonres_Exterior_Wall_Insulation, !- Layer #2 G01 13mm gypsum board; !- Layer #3 Construction, res_ext_wall, !- Name 200mm Normalweight concrete wall, !- Outside Layer Res_Exterior_Wall_Insulation, !- Layer #2 G01 13mm gypsum board; !- Layer #3 Construction, semiheated_ext_wall, !- Name 200mm Normalweight concrete wall, !- Outside Layer Semiheated_Exterior_Wall_Insulation, !- Layer #2 G01 13mm gypsum board; !- Layer #3 Construction, nonres_floor, !- Name Nonres_Floor_Insulation, !- Outside Layer 100mm Normalweight concrete floor, !- Layer #1 CP02 CARPET PAD; !- Layer #2 Construction, res_floor, !- Name Res_Floor_Insulation, !- Outside Layer 100mm Normalweight concrete floor, !- Layer #1 CP02 CARPET PAD; !- Layer #2 Construction, semiheated_floor, !- Name Semiheated_Floor_Insulation, !- Outside Layer 100mm Normalweight concrete floor, !- Layer #1 CP02 CARPET PAD; !- Layer #2 Construction, nonres_floor_ceiling, !- Name - reverse ordered layers for nonres_floor CP02 CARPET PAD, !- Outside Layer 100mm Normalweight concrete floor, !- Layer #1 Nonres_Floor_Insulation; !- Layer #2 Construction, res_floor_ceiling, !- Name - reverse ordered layers for res_floor CP02 CARPET PAD, !- Outside Layer 100mm Normalweight concrete floor, !- Layer #1 Res_Floor_Insulation; !- Layer #2 Construction, semiheated_floor_ceiling, !- Name - reverse ordered layers for semiheated_floor CP02 CARPET PAD, !- Outside Layer 100mm Normalweight concrete floor, !- Layer #1 Semiheated_Floor_Insulation; !- Layer #2 !- =========== ALL OBJECTS IN CLASS: WINDOWMATERIAL:SIMPLEGLAZINGSYSTEM =========== WindowMaterial:SimpleGlazingSystem, Nonres Window Glazing Layer, !- Name 1.9306084, !- U-Factor {W/m2-K} 0.38, !- Solar Heat Gain Coefficient 0.418; !- Visible Transmittance Construction, NonresWindow_U_0.34_SHGC_0.38, !- Name Nonres Window Glazing Layer; !- Outside Layer WindowMaterial:SimpleGlazingSystem, Nonres East Glazing Layer, !- Name 1.9306084, !- U-Factor {W/m2-K} 0.38, !- Solar Heat Gain Coefficient 0.418; !- Visible Transmittance Construction, NonreseastWindow_U_0.34_SHGC_0.38, !- Name Nonres East Glazing Layer; !- Outside Layer !- Res Windows WindowMaterial:SimpleGlazingSystem, Res Window Glazing Layer, !- Name 1.9306084, !- U-Factor {W/m2-K} 0.38, !- Solar Heat Gain Coefficient 0.418; !- Visible Transmittance Construction, ResWindow_U_0.34_SHGC_0.38, !- Name Res Window Glazing Layer; !- Outside Layer WindowMaterial:SimpleGlazingSystem, Res East Glazing Layer, !- Name 1.9306084, !- U-Factor {W/m2-K} 0.38, !- Solar Heat Gain Coefficient 0.418; !- Visible Transmittance Construction, ReseastWindow_U_0.34_SHGC_0.38, !- Name Res East Glazing Layer; !- Outside Layer Construction:CfactorUndergroundWall, Basement_Wall_North_Cfactor, !- Name 0.522376, !- C-Factor 2.439; !- Height Construction:CfactorUndergroundWall, Basement_Wall_East_Cfactor, !- Name 0.522376, !- C-Factor 2.439; !- Height Construction:CfactorUndergroundWall, Basement_Wall_South_Cfactor, !- Name 0.522376, !- C-Factor 2.439; !- Height Construction:CfactorUndergroundWall, Basement_Wall_West_Cfactor, !- Name 0.522376, !- C-Factor 2.439; !- Height !- =========== ALL OBJECTS IN CLASS: ZONE =========== Zone, Basement, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 2.4390, !- Ceiling Height {m} 9120.2700, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, ER_Exam1_Mult4_Flr_1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 4.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 118.9600, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, ER_Trauma1_Flr_1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 118.9600, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, ER_Exam3_Mult4_Flr_1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 4.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 118.9600, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, ER_Trauma2_Flr_1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 118.9600, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, ER_Triage_Mult4_Flr_1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 4.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 118.9600, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Office1_Mult4_Flr_1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 5.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 59.5000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Lobby_Records_Flr_1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 6294.9200, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Corridor_Flr_1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 2428.7900, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, ER_NurseStn_Lobby_Flr_1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 5273.9500, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, OR1_Flr_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 237.9100, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, OR2_Mult5_Flr_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 5.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 237.9100, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, OR3_Flr_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 237.9100, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, OR4_Flr_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 951.7000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, IC_PatRoom1_Mult5_Flr_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 5.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 89.2100, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, IC_PatRoom2_Flr_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 118.9600, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, IC_PatRoom3_Mult6_Flr_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 6.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 89.2100, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, ICU_Flr_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 2637.6300, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, ICU_NurseStn_Lobby_Flr_2,!- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 2854.5100, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Corridor_Flr_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 2428.7900, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, OR_NurseStn_Lobby_Flr_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 4322.2400, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, PatRoom1_Mult10_Flr_3, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 10.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 89.2100, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, PatRoom2_Flr_3, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 148.7100, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, PatRoom3_Mult10_Flr_3, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 10.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 86.2600, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, PatRoom4_Flr_3, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 148.7100, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, PatRoom5_Mult10_Flr_3, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 10.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 89.2100, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, PhysTherapy_Flr_3, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 2081.8200, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, PatRoom6_Flr_3, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 118.9600, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, PatRoom7_Mult10_Flr_3, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 10.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 86.2600, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, PatRoom8_Flr_3, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 118.9600, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, NurseStn_Lobby_Flr_3, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 3866.2500, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Lab_Flr_3, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 1129.4300, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Corridor_SE_Flr_3, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 2418.8800, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Corridor_NW_Flr_3, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 2418.8800, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, PatRoom1_Mult10_Flr_4, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 10.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 89.2100, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, PatRoom2_Flr_4, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 148.7100, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, PatRoom3_Mult10_Flr_4, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 10.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 86.2600, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, PatRoom4_Flr_4, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 148.7100, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, PatRoom5_Mult10_Flr_4, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 10.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 89.2100, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Radiology_Flr_4, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 2081.8200, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, PatRoom6_Flr_4, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 118.9600, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, PatRoom7_Mult10_Flr_4, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 10.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 86.2600, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, PatRoom8_Flr_4, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 118.9600, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, NurseStn_Lobby_Flr_4, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 3866.2200, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Lab_Flr_4, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 1129.4300, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Corridor_SE_Flr_4, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 2418.8800, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Corridor_NW_Flr_4, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 2418.8800, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Dining_Flr_5, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 2974.0400, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, NurseStn_Lobby_Flr_5, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 4441.2300, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Kitchen_Flr_5, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 3965.3700, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Office1_Flr_5, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 297.5000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Office2_Mult5_Flr_5, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 5.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 297.4100, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Office3_Flr_5, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 297.4100, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Office4_Mult6_Flr_5, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 6.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 59.5000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Corridor_Flr_5, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.2683, !- Ceiling Height {m} 2141.3200, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area !- =========== ALL OBJECTS IN CLASS: SURFACEGEOMETRY =========== GlobalGeometryRules, ULC, !- Starting Vertex Position CCW, !- Vertex Entry Direction Relative; !- Coordinate System !- =========== ALL OBJECTS IN CLASS: SURFACE:HEATTRANSFER =========== BuildingSurface:Detailed, Basement_Wall_North, !- Name Wall, !- Surface Type Basement_Wall_North_Cfactor, !- Construction Name Basement, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,53.3400,0.0000, !- X,Y,Z ==> Vertex 1 {m} 70.1040,53.3400,-2.4390, !- X,Y,Z ==> Vertex 2 {m} 0.0000,53.3400,-2.4390, !- X,Y,Z ==> Vertex 3 {m} 0.0000,53.3400,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Basement_Wall_East, !- Name Wall, !- Surface Type Basement_Wall_East_Cfactor, !- Construction Name Basement, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 70.1040,0.0000,-2.4390, !- X,Y,Z ==> Vertex 2 {m} 70.1040,53.3400,-2.4390, !- X,Y,Z ==> Vertex 3 {m} 70.1040,53.3400,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Basement_Wall_South, !- Name Wall, !- Surface Type Basement_Wall_South_Cfactor, !- Construction Name Basement, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,-2.4390, !- X,Y,Z ==> Vertex 2 {m} 70.1040,0.0000,-2.4390, !- X,Y,Z ==> Vertex 3 {m} 70.1040,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Basement_Wall_West, !- Name Wall, !- Surface Type Basement_Wall_West_Cfactor, !- Construction Name Basement, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,53.3400,0.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,53.3400,-2.4390, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,-2.4390, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Basement_Floor, !- Name Floor, !- Surface Type ext_slab_8in_with_carpet,!- Construction Name Basement, !- Zone Name Adiabatic, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,53.3400,-2.4390, !- X,Y,Z ==> Vertex 1 {m} 70.1040,0.0000,-2.4390, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,-2.4390, !- X,Y,Z ==> Vertex 3 {m} 0.0000,53.3400,-2.4390; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Basement_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Basement, !- Zone Name Surface, !- Outside Boundary Condition Basement_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 70.1040,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 70.1040,53.3400,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,53.3400,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Exam1_Mult4_Flr_1_Wall_South, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name ER_Exam1_Mult4_Flr_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m} 39.6240,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 45.7200,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 45.7200,0.0000,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Exam1_Mult4_Flr_1_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name ER_Exam1_Mult4_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_Exam1_Mult4_Flr_1_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.7200,4.5720,0.0000, !- X,Y,Z ==> Vertex 1 {m} 45.7200,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 39.6240,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 39.6240,4.5720,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Exam1_Mult4_Flr_1_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name ER_Exam1_Mult4_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_Exam1_Mult4_Flr_1_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.7200,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m} 45.7200,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m} 39.6240,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m} 39.6240,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Exam1_Mult4_Flr_1_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name ER_Exam1_Mult4_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_Exam1_Mult4_Flr_1_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.7200,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m} 45.7200,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 45.7200,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m} 45.7200,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Exam1_Mult4_Flr_1_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name ER_Exam1_Mult4_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_Exam1_Mult4_Flr_1_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m} 39.6240,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m} 39.6240,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 39.6240,0.0000,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Exam1_Mult4_Flr_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name ER_Exam1_Mult4_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_Exam1_Mult4_Flr_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m} 39.6240,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m} 45.7200,0.0000,4.2683, !- X,Y,Z ==> Vertex 3 {m} 45.7200,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Trauma1_Flr_1_Wall_East, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name ER_Trauma1_Flr_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m} 70.1040,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 70.1040,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m} 70.1040,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Trauma1_Flr_1_Wall_South, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name ER_Trauma1_Flr_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0080,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m} 64.0080,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 70.1040,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 70.1040,0.0000,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Trauma1_Flr_1_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name ER_Trauma1_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_Trauma1_Flr_1_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,4.5720,0.0000, !- X,Y,Z ==> Vertex 1 {m} 70.1040,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0080,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0080,4.5720,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Trauma1_Flr_1_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name ER_Trauma1_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_Trauma1_Flr_1_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m} 70.1040,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0080,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0080,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Trauma1_Flr_1_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name ER_Trauma1_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_Trauma1_Flr_1_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0080,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m} 64.0080,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0080,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0080,0.0000,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Trauma1_Flr_1_Ceiling,!- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name ER_Trauma1_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_Trauma1_Flr_1_Ceiling,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0080,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m} 64.0080,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m} 70.1040,0.0000,4.2683, !- X,Y,Z ==> Vertex 3 {m} 70.1040,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Exam3_Mult4_Flr_1_Wall_East, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name ER_Exam3_Mult4_Flr_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m} 70.1040,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m} 70.1040,9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m} 70.1040,9.1440,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Exam3_Mult4_Flr_1_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name ER_Exam3_Mult4_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_Exam3_Mult4_Flr_1_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,9.1440,0.0000, !- X,Y,Z ==> Vertex 1 {m} 70.1040,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0080,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0080,9.1440,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Exam3_Mult4_Flr_1_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name ER_Exam3_Mult4_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_Exam3_Mult4_Flr_1_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,9.1440,4.2683, !- X,Y,Z ==> Vertex 1 {m} 70.1040,9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0080,9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0080,9.1440,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Exam3_Mult4_Flr_1_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name ER_Exam3_Mult4_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_Exam3_Mult4_Flr_1_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0080,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m} 64.0080,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m} 70.1040,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m} 70.1040,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Exam3_Mult4_Flr_1_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name ER_Exam3_Mult4_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_Exam3_Mult4_Flr_1_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0080,9.1440,4.2683, !- X,Y,Z ==> Vertex 1 {m} 64.0080,9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0080,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0080,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Exam3_Mult4_Flr_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name ER_Exam3_Mult4_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_Exam3_Mult4_Flr_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0080,9.1440,4.2683, !- X,Y,Z ==> Vertex 1 {m} 64.0080,4.5720,4.2683, !- X,Y,Z ==> Vertex 2 {m} 70.1040,4.5720,4.2683, !- X,Y,Z ==> Vertex 3 {m} 70.1040,9.1440,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Trauma2_Flr_1_Wall_North, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name ER_Trauma2_Flr_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m} 70.1040,53.3400,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0080,53.3400,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0080,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Trauma2_Flr_1_Wall_East, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name ER_Trauma2_Flr_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,48.7680,4.2683, !- X,Y,Z ==> Vertex 1 {m} 70.1040,48.7680,0.0000, !- X,Y,Z ==> Vertex 2 {m} 70.1040,53.3400,0.0000, !- X,Y,Z ==> Vertex 3 {m} 70.1040,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Trauma2_Flr_1_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name ER_Trauma2_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_Trauma2_Flr_1_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,53.3400,0.0000, !- X,Y,Z ==> Vertex 1 {m} 70.1040,48.7680,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0080,48.7680,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0080,53.3400,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Trauma2_Flr_1_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name ER_Trauma2_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_Trauma2_Flr_1_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0080,48.7680,4.2683, !- X,Y,Z ==> Vertex 1 {m} 64.0080,48.7680,0.0000, !- X,Y,Z ==> Vertex 2 {m} 70.1040,48.7680,0.0000, !- X,Y,Z ==> Vertex 3 {m} 70.1040,48.7680,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Trauma2_Flr_1_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name ER_Trauma2_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_Trauma2_Flr_1_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0080,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m} 64.0080,53.3400,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0080,48.7680,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0080,48.7680,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Trauma2_Flr_1_Ceiling,!- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name ER_Trauma2_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_Trauma2_Flr_1_Ceiling,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0080,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m} 64.0080,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m} 70.1040,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m} 70.1040,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Triage_Mult4_Flr_1_Wall_North, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name ER_Triage_Mult4_Flr_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.7200,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m} 45.7200,53.3400,0.0000, !- X,Y,Z ==> Vertex 2 {m} 39.6240,53.3400,0.0000, !- X,Y,Z ==> Vertex 3 {m} 39.6240,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Triage_Mult4_Flr_1_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name ER_Triage_Mult4_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_Triage_Mult4_Flr_1_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.7200,53.3400,0.0000, !- X,Y,Z ==> Vertex 1 {m} 45.7200,48.7680,0.0000, !- X,Y,Z ==> Vertex 2 {m} 39.6240,48.7680,0.0000, !- X,Y,Z ==> Vertex 3 {m} 39.6240,53.3400,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Triage_Mult4_Flr_1_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name ER_Triage_Mult4_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_Triage_Mult4_Flr_1_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.7200,48.7680,4.2683, !- X,Y,Z ==> Vertex 1 {m} 45.7200,48.7680,0.0000, !- X,Y,Z ==> Vertex 2 {m} 45.7200,53.3400,0.0000, !- X,Y,Z ==> Vertex 3 {m} 45.7200,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Triage_Mult4_Flr_1_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name ER_Triage_Mult4_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_Triage_Mult4_Flr_1_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,48.7680,4.2683, !- X,Y,Z ==> Vertex 1 {m} 39.6240,48.7680,0.0000, !- X,Y,Z ==> Vertex 2 {m} 45.7200,48.7680,0.0000, !- X,Y,Z ==> Vertex 3 {m} 45.7200,48.7680,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Triage_Mult4_Flr_1_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name ER_Triage_Mult4_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_Triage_Mult4_Flr_1_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m} 39.6240,53.3400,0.0000, !- X,Y,Z ==> Vertex 2 {m} 39.6240,48.7680,0.0000, !- X,Y,Z ==> Vertex 3 {m} 39.6240,48.7680,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_Triage_Mult4_Flr_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name ER_Triage_Mult4_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_Triage_Mult4_Flr_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m} 39.6240,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m} 45.7200,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m} 45.7200,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office1_Mult4_Flr_1_Wall_South, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Office1_Mult4_Flr_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 6.0960,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m} 6.0960,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 9.1440,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 9.1440,0.0000,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office1_Mult4_Flr_1_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Office1_Mult4_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition Office1_Mult4_Flr_1_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,4.5720,0.0000, !- X,Y,Z ==> Vertex 1 {m} 9.1440,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 6.0960,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 6.0960,4.5720,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office1_Mult4_Flr_1_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name Office1_Mult4_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition Office1_Mult4_Flr_1_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m} 9.1440,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m} 6.0960,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m} 6.0960,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office1_Mult4_Flr_1_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Office1_Mult4_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition Office1_Mult4_Flr_1_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m} 9.1440,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 9.1440,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m} 9.1440,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office1_Mult4_Flr_1_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Office1_Mult4_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition Office1_Mult4_Flr_1_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 6.0960,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m} 6.0960,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m} 6.0960,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 6.0960,0.0000,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office1_Mult4_Flr_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Office1_Mult4_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition Office1_Mult4_Flr_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 6.0960,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m} 6.0960,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m} 9.1440,0.0000,4.2683, !- X,Y,Z ==> Vertex 3 {m} 9.1440,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lobby_Records_Flr_1_Wall_North, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Lobby_Records_Flr_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m} 28.9560,53.3400,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,53.3400,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lobby_Records_Flr_1_Wall_1_West, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Lobby_Records_Flr_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m} 0.0000,53.3400,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lobby_Records_Flr_1_Wall_1_South, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Lobby_Records_Flr_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 6.0960,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 6.0960,0.0000,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lobby_Records_Flr_1_Wall_2_South, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Lobby_Records_Flr_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 21.3415,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m} 21.3415,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 28.9560,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 28.9560,0.0000,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lobby_Records_Flr_1_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Lobby_Records_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition Lobby_Records_Flr_1_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 8, !- Number of Vertices 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,53.3400,0.0000, !- X,Y,Z ==> Vertex 2 {m} 28.9560,53.3400,0.0000, !- X,Y,Z ==> Vertex 3 {m} 28.9560,0.0000,0.0000, !- X,Y,Z ==> Vertex 4 {m} 21.3415,0.0000,0.0000, !- X,Y,Z ==> Vertex 5 {m} 21.3415,4.5720,0.0000, !- X,Y,Z ==> Vertex 6 {m} 6.0960,4.5720,0.0000, !- X,Y,Z ==> Vertex 7 {m} 6.0960,0.0000,0.0000; !- X,Y,Z ==> Vertex 8 {m} BuildingSurface:Detailed, Lobby_Records_Flr_1_Wall_3_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Lobby_Records_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition Lobby_Records_Flr_1_Wall_3_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 21.3415,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m} 21.3415,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m} 21.3415,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 21.3415,0.0000,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lobby_Records_Flr_1_Wall_1_East, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name Lobby_Records_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Flr_1_Wall_1_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,15.2400,4.2683, !- X,Y,Z ==> Vertex 1 {m} 28.9560,15.2400,0.0000, !- X,Y,Z ==> Vertex 2 {m} 28.9560,53.3400,0.0000, !- X,Y,Z ==> Vertex 3 {m} 28.9560,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lobby_Records_Flr_1_Wall_2_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Lobby_Records_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Flr_1_Wall_2_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m} 28.9560,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 28.9560,15.2400,0.0000, !- X,Y,Z ==> Vertex 3 {m} 28.9560,15.2400,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lobby_Records_Flr_1_Wall_3_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Lobby_Records_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition Lobby_Records_Flr_1_Wall_3_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 6.0960,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m} 6.0960,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 6.0960,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m} 6.0960,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lobby_Records_Flr_1_Wall_3_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name Lobby_Records_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition Lobby_Records_Flr_1_Wall_3_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 6.0960,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m} 6.0960,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m} 21.3415,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m} 21.3415,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lobby_Records_Flr_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Lobby_Records_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition Lobby_Records_Flr_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 8, !- Number of Vertices 0.0000,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m} 6.0960,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m} 6.0960,4.5720,4.2683, !- X,Y,Z ==> Vertex 3 {m} 21.3415,4.5720,4.2683, !- X,Y,Z ==> Vertex 4 {m} 21.3415,0.0000,4.2683, !- X,Y,Z ==> Vertex 5 {m} 28.9560,0.0000,4.2683, !- X,Y,Z ==> Vertex 6 {m} 28.9560,53.3400,4.2683, !- X,Y,Z ==> Vertex 7 {m} 0.0000,53.3400,4.2683; !- X,Y,Z ==> Vertex 8 {m} BuildingSurface:Detailed, Corridor_Flr_1_Wall_1_West, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name Corridor_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition Lobby_Records_Flr_1_Wall_1_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m} 28.9560,53.3400,0.0000, !- X,Y,Z ==> Vertex 2 {m} 28.9560,15.2400,0.0000, !- X,Y,Z ==> Vertex 3 {m} 28.9560,15.2400,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Flr_1_Wall_2_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition Lobby_Records_Flr_1_Wall_2_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,15.2400,4.2683, !- X,Y,Z ==> Vertex 1 {m} 28.9560,15.2400,0.0000, !- X,Y,Z ==> Vertex 2 {m} 28.9560,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 28.9560,0.0000,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Flr_1_Wall_North, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corridor_Flr_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m} 39.6240,53.3400,0.0000, !- X,Y,Z ==> Vertex 2 {m} 28.9560,53.3400,0.0000, !- X,Y,Z ==> Vertex 3 {m} 28.9560,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Flr_1_Wall_South, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corridor_Flr_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m} 28.9560,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 39.6240,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 39.6240,0.0000,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Flr_1_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Corridor_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Flr_1_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,53.3400,0.0000, !- X,Y,Z ==> Vertex 1 {m} 39.6240,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 28.9560,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 28.9560,53.3400,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Flr_1_Wall_East,!- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Flr_1_Wall_East,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m} 39.6240,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 39.6240,53.3400,0.0000, !- X,Y,Z ==> Vertex 3 {m} 39.6240,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Flr_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Corridor_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Flr_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m} 28.9560,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m} 39.6240,0.0000,4.2683, !- X,Y,Z ==> Vertex 3 {m} 39.6240,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_NurseStn_Lobby_Flr_1_Wall_1_East, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name ER_NurseStn_Lobby_Flr_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,13.7160,4.2683, !- X,Y,Z ==> Vertex 1 {m} 70.1040,13.7160,0.0000, !- X,Y,Z ==> Vertex 2 {m} 70.1040,39.6240,0.0000, !- X,Y,Z ==> Vertex 3 {m} 70.1040,39.6240,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_NurseStn_Lobby_Flr_1_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name ER_NurseStn_Lobby_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_NurseStn_Lobby_Flr_1_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 8, !- Number of Vertices 39.6240,4.5720,0.0000, !- X,Y,Z ==> Vertex 1 {m} 39.6240,48.7680,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0080,48.7680,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0080,39.6240,0.0000, !- X,Y,Z ==> Vertex 4 {m} 70.1040,39.6240,0.0000, !- X,Y,Z ==> Vertex 5 {m} 70.1040,13.7160,0.0000, !- X,Y,Z ==> Vertex 6 {m} 64.0080,13.7160,0.0000, !- X,Y,Z ==> Vertex 7 {m} 64.0080,4.5720,0.0000; !- X,Y,Z ==> Vertex 8 {m} BuildingSurface:Detailed, ER_NurseStn_Lobby_Flr_1_Wall_1_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name ER_NurseStn_Lobby_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_NurseStn_Lobby_Flr_1_Wall_1_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0080,48.7680,4.2683, !- X,Y,Z ==> Vertex 1 {m} 64.0080,48.7680,0.0000, !- X,Y,Z ==> Vertex 2 {m} 39.6240,48.7680,0.0000, !- X,Y,Z ==> Vertex 3 {m} 39.6240,48.7680,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_NurseStn_Lobby_Flr_1_Wall_2_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name ER_NurseStn_Lobby_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_NurseStn_Lobby_Flr_1_Wall_2_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,39.6240,4.2683, !- X,Y,Z ==> Vertex 1 {m} 70.1040,39.6240,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0080,39.6240,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0080,39.6240,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_NurseStn_Lobby_Flr_1_Wall_1_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name ER_NurseStn_Lobby_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_NurseStn_Lobby_Flr_1_Wall_1_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,48.7680,4.2683, !- X,Y,Z ==> Vertex 1 {m} 39.6240,48.7680,0.0000, !- X,Y,Z ==> Vertex 2 {m} 39.6240,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m} 39.6240,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_NurseStn_Lobby_Flr_1_Wall_2_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name ER_NurseStn_Lobby_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_NurseStn_Lobby_Flr_1_Wall_2_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0080,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m} 64.0080,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0080,13.7160,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0080,13.7160,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_NurseStn_Lobby_Flr_1_Wall_3_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name ER_NurseStn_Lobby_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_NurseStn_Lobby_Flr_1_Wall_3_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0080,39.6240,4.2683, !- X,Y,Z ==> Vertex 1 {m} 64.0080,39.6240,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0080,48.7680,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0080,48.7680,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_NurseStn_Lobby_Flr_1_Wall_1_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name ER_NurseStn_Lobby_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_NurseStn_Lobby_Flr_1_Wall_1_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m} 39.6240,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0080,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0080,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_NurseStn_Lobby_Flr_1_Wall_2_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name ER_NurseStn_Lobby_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_NurseStn_Lobby_Flr_1_Wall_2_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0080,13.7160,4.2683, !- X,Y,Z ==> Vertex 1 {m} 64.0080,13.7160,0.0000, !- X,Y,Z ==> Vertex 2 {m} 70.1040,13.7160,0.0000, !- X,Y,Z ==> Vertex 3 {m} 70.1040,13.7160,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ER_NurseStn_Lobby_Flr_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name ER_NurseStn_Lobby_Flr_1, !- Zone Name Surface, !- Outside Boundary Condition ER_NurseStn_Lobby_Flr_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 8, !- Number of Vertices 39.6240,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m} 64.0080,4.5720,4.2683, !- X,Y,Z ==> Vertex 2 {m} 64.0080,13.7160,4.2683, !- X,Y,Z ==> Vertex 3 {m} 70.1040,13.7160,4.2683, !- X,Y,Z ==> Vertex 4 {m} 70.1040,39.6240,4.2683, !- X,Y,Z ==> Vertex 5 {m} 64.0080,39.6240,4.2683, !- X,Y,Z ==> Vertex 6 {m} 64.0080,48.7680,4.2683, !- X,Y,Z ==> Vertex 7 {m} 39.6240,48.7680,4.2683; !- X,Y,Z ==> Vertex 8 {m} BuildingSurface:Detailed, OR1_Flr_2_Wall_North, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name OR1_Flr_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m} 70.1040,53.3400,4.2683, !- X,Y,Z ==> Vertex 2 {m} 60.9600,53.3400,4.2683, !- X,Y,Z ==> Vertex 3 {m} 60.9600,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR1_Flr_2_Wall_East, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name OR1_Flr_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,47.2440,8.5366, !- X,Y,Z ==> Vertex 1 {m} 70.1040,47.2440,4.2683, !- X,Y,Z ==> Vertex 2 {m} 70.1040,53.3400,4.2683, !- X,Y,Z ==> Vertex 3 {m} 70.1040,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR1_Flr_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name OR1_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR1_Flr_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m} 70.1040,47.2440,4.2683, !- X,Y,Z ==> Vertex 2 {m} 60.9600,47.2440,4.2683, !- X,Y,Z ==> Vertex 3 {m} 60.9600,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR1_Flr_2_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name OR1_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR1_Flr_2_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,47.2440,8.5366, !- X,Y,Z ==> Vertex 1 {m} 60.9600,47.2440,4.2683, !- X,Y,Z ==> Vertex 2 {m} 70.1040,47.2440,4.2683, !- X,Y,Z ==> Vertex 3 {m} 70.1040,47.2440,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR1_Flr_2_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name OR1_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR1_Flr_2_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m} 60.9600,53.3400,4.2683, !- X,Y,Z ==> Vertex 2 {m} 60.9600,47.2440,4.2683, !- X,Y,Z ==> Vertex 3 {m} 60.9600,47.2440,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR1_Flr_2_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name OR1_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR1_Flr_2_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m} 60.9600,47.2440,8.5366, !- X,Y,Z ==> Vertex 2 {m} 70.1040,47.2440,8.5366, !- X,Y,Z ==> Vertex 3 {m} 70.1040,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR2_Mult5_Flr_2_Wall_East, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name OR2_Mult5_Flr_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,41.1480,8.5366, !- X,Y,Z ==> Vertex 1 {m} 70.1040,41.1480,4.2683, !- X,Y,Z ==> Vertex 2 {m} 70.1040,47.2440,4.2683, !- X,Y,Z ==> Vertex 3 {m} 70.1040,47.2440,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR2_Mult5_Flr_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name OR2_Mult5_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR2_Mult5_Flr_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,47.2440,4.2683, !- X,Y,Z ==> Vertex 1 {m} 70.1040,41.1480,4.2683, !- X,Y,Z ==> Vertex 2 {m} 60.9600,41.1480,4.2683, !- X,Y,Z ==> Vertex 3 {m} 60.9600,47.2440,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR2_Mult5_Flr_2_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name OR2_Mult5_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR2_Mult5_Flr_2_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,47.2440,8.5366, !- X,Y,Z ==> Vertex 1 {m} 70.1040,47.2440,4.2683, !- X,Y,Z ==> Vertex 2 {m} 60.9600,47.2440,4.2683, !- X,Y,Z ==> Vertex 3 {m} 60.9600,47.2440,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR2_Mult5_Flr_2_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name OR2_Mult5_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR2_Mult5_Flr_2_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,41.1480,8.5366, !- X,Y,Z ==> Vertex 1 {m} 60.9600,41.1480,4.2683, !- X,Y,Z ==> Vertex 2 {m} 70.1040,41.1480,4.2683, !- X,Y,Z ==> Vertex 3 {m} 70.1040,41.1480,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR2_Mult5_Flr_2_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name OR2_Mult5_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR2_Mult5_Flr_2_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,47.2440,8.5366, !- X,Y,Z ==> Vertex 1 {m} 60.9600,47.2440,4.2683, !- X,Y,Z ==> Vertex 2 {m} 60.9600,41.1480,4.2683, !- X,Y,Z ==> Vertex 3 {m} 60.9600,41.1480,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR2_Mult5_Flr_2_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name OR2_Mult5_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR2_Mult5_Flr_2_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,47.2440,8.5366, !- X,Y,Z ==> Vertex 1 {m} 60.9600,41.1480,8.5366, !- X,Y,Z ==> Vertex 2 {m} 70.1040,41.1480,8.5366, !- X,Y,Z ==> Vertex 3 {m} 70.1040,47.2440,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR3_Flr_2_Wall_North, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name OR3_Flr_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 48.7680,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m} 48.7680,53.3400,4.2683, !- X,Y,Z ==> Vertex 2 {m} 39.6240,53.3400,4.2683, !- X,Y,Z ==> Vertex 3 {m} 39.6240,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR3_Flr_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name OR3_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR3_Flr_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 48.7680,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m} 48.7680,47.2440,4.2683, !- X,Y,Z ==> Vertex 2 {m} 39.6240,47.2440,4.2683, !- X,Y,Z ==> Vertex 3 {m} 39.6240,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR3_Flr_2_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name OR3_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR3_Flr_2_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 48.7680,47.2440,8.5366, !- X,Y,Z ==> Vertex 1 {m} 48.7680,47.2440,4.2683, !- X,Y,Z ==> Vertex 2 {m} 48.7680,53.3400,4.2683, !- X,Y,Z ==> Vertex 3 {m} 48.7680,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR3_Flr_2_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name OR3_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR3_Flr_2_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,47.2440,8.5366, !- X,Y,Z ==> Vertex 1 {m} 39.6240,47.2440,4.2683, !- X,Y,Z ==> Vertex 2 {m} 48.7680,47.2440,4.2683, !- X,Y,Z ==> Vertex 3 {m} 48.7680,47.2440,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR3_Flr_2_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name OR3_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR3_Flr_2_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m} 39.6240,53.3400,4.2683, !- X,Y,Z ==> Vertex 2 {m} 39.6240,47.2440,4.2683, !- X,Y,Z ==> Vertex 3 {m} 39.6240,47.2440,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR3_Flr_2_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name OR3_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR3_Flr_2_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m} 39.6240,47.2440,8.5366, !- X,Y,Z ==> Vertex 2 {m} 48.7680,47.2440,8.5366, !- X,Y,Z ==> Vertex 3 {m} 48.7680,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR4_Flr_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name OR4_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR4_Flr_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 48.7680,47.2440,4.2683, !- X,Y,Z ==> Vertex 1 {m} 48.7680,22.8600,4.2683, !- X,Y,Z ==> Vertex 2 {m} 39.6240,22.8600,4.2683, !- X,Y,Z ==> Vertex 3 {m} 39.6240,47.2440,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR4_Flr_2_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name OR4_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR4_Flr_2_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 48.7680,47.2440,8.5366, !- X,Y,Z ==> Vertex 1 {m} 48.7680,47.2440,4.2683, !- X,Y,Z ==> Vertex 2 {m} 39.6240,47.2440,4.2683, !- X,Y,Z ==> Vertex 3 {m} 39.6240,47.2440,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR4_Flr_2_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name OR4_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR4_Flr_2_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 48.7680,22.8600,8.5366, !- X,Y,Z ==> Vertex 1 {m} 48.7680,22.8600,4.2683, !- X,Y,Z ==> Vertex 2 {m} 48.7680,47.2440,4.2683, !- X,Y,Z ==> Vertex 3 {m} 48.7680,47.2440,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR4_Flr_2_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name OR4_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR4_Flr_2_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,22.8600,8.5366, !- X,Y,Z ==> Vertex 1 {m} 39.6240,22.8600,4.2683, !- X,Y,Z ==> Vertex 2 {m} 48.7680,22.8600,4.2683, !- X,Y,Z ==> Vertex 3 {m} 48.7680,22.8600,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR4_Flr_2_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name OR4_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR4_Flr_2_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,47.2440,8.5366, !- X,Y,Z ==> Vertex 1 {m} 39.6240,47.2440,4.2683, !- X,Y,Z ==> Vertex 2 {m} 39.6240,22.8600,4.2683, !- X,Y,Z ==> Vertex 3 {m} 39.6240,22.8600,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR4_Flr_2_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name OR4_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR4_Flr_2_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,47.2440,8.5366, !- X,Y,Z ==> Vertex 1 {m} 39.6240,22.8600,8.5366, !- X,Y,Z ==> Vertex 2 {m} 48.7680,22.8600,8.5366, !- X,Y,Z ==> Vertex 3 {m} 48.7680,47.2440,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, IC_PatRoom1_Mult5_Flr_2_Wall_North, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name IC_PatRoom1_Mult5_Flr_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m} 28.9560,53.3400,4.2683, !- X,Y,Z ==> Vertex 2 {m} 24.3840,53.3400,4.2683, !- X,Y,Z ==> Vertex 3 {m} 24.3840,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, IC_PatRoom1_Mult5_Flr_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name IC_PatRoom1_Mult5_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition IC_PatRoom1_Mult5_Flr_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m} 28.9560,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m} 24.3840,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m} 24.3840,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, IC_PatRoom1_Mult5_Flr_2_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name IC_PatRoom1_Mult5_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition IC_PatRoom1_Mult5_Flr_2_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 24.3840,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m} 24.3840,53.3400,4.2683, !- X,Y,Z ==> Vertex 2 {m} 24.3840,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m} 24.3840,48.7680,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, IC_PatRoom1_Mult5_Flr_2_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name IC_PatRoom1_Mult5_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition IC_PatRoom1_Mult5_Flr_2_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,48.7680,8.5366, !- X,Y,Z ==> Vertex 1 {m} 28.9560,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m} 28.9560,53.3400,4.2683, !- X,Y,Z ==> Vertex 3 {m} 28.9560,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, IC_PatRoom1_Mult5_Flr_2_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name IC_PatRoom1_Mult5_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition IC_PatRoom1_Mult5_Flr_2_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 24.3840,48.7680,8.5366, !- X,Y,Z ==> Vertex 1 {m} 24.3840,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m} 28.9560,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m} 28.9560,48.7680,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, IC_PatRoom1_Mult5_Flr_2_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name IC_PatRoom1_Mult5_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition IC_PatRoom1_Mult5_Flr_2_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 24.3840,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m} 24.3840,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 28.9560,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 28.9560,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, IC_PatRoom2_Flr_2_Wall_North, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name IC_PatRoom2_Flr_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 6.0960,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m} 6.0960,53.3400,4.2683, !- X,Y,Z ==> Vertex 2 {m} 0.0000,53.3400,4.2683, !- X,Y,Z ==> Vertex 3 {m} 0.0000,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, IC_PatRoom2_Flr_2_Wall_West, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name IC_PatRoom2_Flr_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m} 0.0000,53.3400,4.2683, !- X,Y,Z ==> Vertex 2 {m} 0.0000,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m} 0.0000,48.7680,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, IC_PatRoom2_Flr_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name IC_PatRoom2_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition IC_PatRoom2_Flr_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 6.0960,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m} 6.0960,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m} 0.0000,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m} 0.0000,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, IC_PatRoom2_Flr_2_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name IC_PatRoom2_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition IC_PatRoom2_Flr_2_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 6.0960,48.7680,8.5366, !- X,Y,Z ==> Vertex 1 {m} 6.0960,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m} 6.0960,53.3400,4.2683, !- X,Y,Z ==> Vertex 3 {m} 6.0960,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, IC_PatRoom2_Flr_2_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name IC_PatRoom2_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition IC_PatRoom2_Flr_2_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,48.7680,8.5366, !- X,Y,Z ==> Vertex 1 {m} 0.0000,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m} 6.0960,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m} 6.0960,48.7680,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, IC_PatRoom2_Flr_2_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name IC_PatRoom2_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition IC_PatRoom2_Flr_2_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m} 0.0000,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 6.0960,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 6.0960,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, IC_PatRoom3_Mult6_Flr_2_Wall_West, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name IC_PatRoom3_Mult6_Flr_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,48.7680,8.5366, !- X,Y,Z ==> Vertex 1 {m} 0.0000,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m} 0.0000,44.1960,4.2683, !- X,Y,Z ==> Vertex 3 {m} 0.0000,44.1960,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, IC_PatRoom3_Mult6_Flr_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name IC_PatRoom3_Mult6_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition IC_PatRoom3_Mult6_Flr_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5720,48.7680,4.2683, !- X,Y,Z ==> Vertex 1 {m} 4.5720,44.1960,4.2683, !- X,Y,Z ==> Vertex 2 {m} 0.0000,44.1960,4.2683, !- X,Y,Z ==> Vertex 3 {m} 0.0000,48.7680,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, IC_PatRoom3_Mult6_Flr_2_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name IC_PatRoom3_Mult6_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition IC_PatRoom3_Mult6_Flr_2_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5720,48.7680,8.5366, !- X,Y,Z ==> Vertex 1 {m} 4.5720,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m} 0.0000,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m} 0.0000,48.7680,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, IC_PatRoom3_Mult6_Flr_2_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name IC_PatRoom3_Mult6_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition IC_PatRoom3_Mult6_Flr_2_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5720,44.1960,8.5366, !- X,Y,Z ==> Vertex 1 {m} 4.5720,44.1960,4.2683, !- X,Y,Z ==> Vertex 2 {m} 4.5720,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m} 4.5720,48.7680,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, IC_PatRoom3_Mult6_Flr_2_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name IC_PatRoom3_Mult6_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition IC_PatRoom3_Mult6_Flr_2_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,44.1960,8.5366, !- X,Y,Z ==> Vertex 1 {m} 0.0000,44.1960,4.2683, !- X,Y,Z ==> Vertex 2 {m} 4.5720,44.1960,4.2683, !- X,Y,Z ==> Vertex 3 {m} 4.5720,44.1960,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, IC_PatRoom3_Mult6_Flr_2_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name IC_PatRoom3_Mult6_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition IC_PatRoom3_Mult6_Flr_2_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,48.7680,8.5366, !- X,Y,Z ==> Vertex 1 {m} 0.0000,44.1960,8.5366, !- X,Y,Z ==> Vertex 2 {m} 4.5720,44.1960,8.5366, !- X,Y,Z ==> Vertex 3 {m} 4.5720,48.7680,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ICU_Flr_2_Wall_South, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name ICU_Flr_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,8.5366, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m} 28.9560,0.0000,4.2683, !- X,Y,Z ==> Vertex 3 {m} 28.9560,0.0000,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ICU_Flr_2_Wall_West, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name ICU_Flr_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,21.3415,8.5366, !- X,Y,Z ==> Vertex 1 {m} 0.0000,21.3415,4.2683, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,4.2683, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ICU_Flr_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name ICU_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition ICU_Flr_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,21.3415,4.2683, !- X,Y,Z ==> Vertex 1 {m} 28.9560,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,4.2683, !- X,Y,Z ==> Vertex 3 {m} 0.0000,21.3415,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ICU_Flr_2_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name ICU_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition ICU_Flr_2_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,21.3415,8.5366, !- X,Y,Z ==> Vertex 1 {m} 28.9560,21.3415,4.2683, !- X,Y,Z ==> Vertex 2 {m} 0.0000,21.3415,4.2683, !- X,Y,Z ==> Vertex 3 {m} 0.0000,21.3415,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ICU_Flr_2_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name ICU_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition ICU_Flr_2_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,0.0000,8.5366, !- X,Y,Z ==> Vertex 1 {m} 28.9560,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m} 28.9560,21.3415,4.2683, !- X,Y,Z ==> Vertex 3 {m} 28.9560,21.3415,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ICU_Flr_2_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name ICU_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition ICU_Flr_2_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,21.3415,8.5366, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m} 28.9560,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m} 28.9560,21.3415,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ICU_NurseStn_Lobby_Flr_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name ICU_NurseStn_Lobby_Flr_2,!- Zone Name Surface, !- Outside Boundary Condition ICU_NurseStn_Lobby_Flr_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5720,21.3415,4.2683, !- X,Y,Z ==> Vertex 1 {m} 4.5720,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m} 28.9560,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m} 28.9560,21.3415,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ICU_NurseStn_Lobby_Flr_2_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name ICU_NurseStn_Lobby_Flr_2,!- Zone Name Surface, !- Outside Boundary Condition ICU_NurseStn_Lobby_Flr_2_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,48.7680,8.5366, !- X,Y,Z ==> Vertex 1 {m} 28.9560,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m} 4.5720,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m} 4.5720,48.7680,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ICU_NurseStn_Lobby_Flr_2_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name ICU_NurseStn_Lobby_Flr_2,!- Zone Name Surface, !- Outside Boundary Condition ICU_NurseStn_Lobby_Flr_2_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5720,48.7680,8.5366, !- X,Y,Z ==> Vertex 1 {m} 4.5720,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m} 4.5720,21.3415,4.2683, !- X,Y,Z ==> Vertex 3 {m} 4.5720,21.3415,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ICU_NurseStn_Lobby_Flr_2_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name ICU_NurseStn_Lobby_Flr_2,!- Zone Name Surface, !- Outside Boundary Condition ICU_NurseStn_Lobby_Flr_2_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,21.3415,8.5366, !- X,Y,Z ==> Vertex 1 {m} 28.9560,21.3415,4.2683, !- X,Y,Z ==> Vertex 2 {m} 28.9560,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m} 28.9560,48.7680,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ICU_NurseStn_Lobby_Flr_2_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name ICU_NurseStn_Lobby_Flr_2,!- Zone Name Surface, !- Outside Boundary Condition ICU_NurseStn_Lobby_Flr_2_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5720,21.3415,8.5366, !- X,Y,Z ==> Vertex 1 {m} 4.5720,21.3415,4.2683, !- X,Y,Z ==> Vertex 2 {m} 28.9560,21.3415,4.2683, !- X,Y,Z ==> Vertex 3 {m} 28.9560,21.3415,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, ICU_NurseStn_Lobby_Flr_2_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name ICU_NurseStn_Lobby_Flr_2,!- Zone Name Surface, !- Outside Boundary Condition ICU_NurseStn_Lobby_Flr_2_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5720,21.3415,8.5366, !- X,Y,Z ==> Vertex 1 {m} 28.9560,21.3415,8.5366, !- X,Y,Z ==> Vertex 2 {m} 28.9560,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 4.5720,48.7680,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Flr_2_Wall_North, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corridor_Flr_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m} 39.6240,53.3400,4.2683, !- X,Y,Z ==> Vertex 2 {m} 28.9560,53.3400,4.2683, !- X,Y,Z ==> Vertex 3 {m} 28.9560,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Flr_2_Wall_South, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corridor_Flr_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,0.0000,8.5366, !- X,Y,Z ==> Vertex 1 {m} 28.9560,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m} 39.6240,0.0000,4.2683, !- X,Y,Z ==> Vertex 3 {m} 39.6240,0.0000,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Flr_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Corridor_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Flr_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m} 39.6240,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m} 28.9560,0.0000,4.2683, !- X,Y,Z ==> Vertex 3 {m} 28.9560,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Flr_2_Wall_East,!- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Flr_2_Wall_East,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,0.0000,8.5366, !- X,Y,Z ==> Vertex 1 {m} 39.6240,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m} 39.6240,53.3400,4.2683, !- X,Y,Z ==> Vertex 3 {m} 39.6240,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Flr_2_Wall_West,!- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Flr_2_Wall_West,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m} 28.9560,53.3400,4.2683, !- X,Y,Z ==> Vertex 2 {m} 28.9560,0.0000,4.2683, !- X,Y,Z ==> Vertex 3 {m} 28.9560,0.0000,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Flr_2_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Corridor_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Flr_2_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m} 28.9560,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m} 39.6240,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m} 39.6240,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR_NurseStn_Lobby_Flr_2_Wall_1_North, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name OR_NurseStn_Lobby_Flr_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m} 60.9600,53.3400,4.2683, !- X,Y,Z ==> Vertex 2 {m} 48.7680,53.3400,4.2683, !- X,Y,Z ==> Vertex 3 {m} 48.7680,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR_NurseStn_Lobby_Flr_2_Wall_South, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name OR_NurseStn_Lobby_Flr_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,0.0000,8.5366, !- X,Y,Z ==> Vertex 1 {m} 39.6240,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m} 70.1040,0.0000,4.2683, !- X,Y,Z ==> Vertex 3 {m} 70.1040,0.0000,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR_NurseStn_Lobby_Flr_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name OR_NurseStn_Lobby_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR_NurseStn_Lobby_Flr_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 8, !- Number of Vertices 39.6240,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m} 39.6240,22.8600,4.2683, !- X,Y,Z ==> Vertex 2 {m} 48.7680,22.8600,4.2683, !- X,Y,Z ==> Vertex 3 {m} 48.7680,53.3400,4.2683, !- X,Y,Z ==> Vertex 4 {m} 60.9600,53.3400,4.2683, !- X,Y,Z ==> Vertex 5 {m} 60.9600,16.7640,4.2683, !- X,Y,Z ==> Vertex 6 {m} 70.1040,16.7640,4.2683, !- X,Y,Z ==> Vertex 7 {m} 70.1040,0.0000,4.2683; !- X,Y,Z ==> Vertex 8 {m} BuildingSurface:Detailed, OR_NurseStn_Lobby_Flr_2_Wall_2_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name OR_NurseStn_Lobby_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR_NurseStn_Lobby_Flr_2_Wall_2_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 48.7680,22.8600,8.5366, !- X,Y,Z ==> Vertex 1 {m} 48.7680,22.8600,4.2683, !- X,Y,Z ==> Vertex 2 {m} 39.6240,22.8600,4.2683, !- X,Y,Z ==> Vertex 3 {m} 39.6240,22.8600,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR_NurseStn_Lobby_Flr_2_Wall_3_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name OR_NurseStn_Lobby_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR_NurseStn_Lobby_Flr_2_Wall_3_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,16.7640,8.5366, !- X,Y,Z ==> Vertex 1 {m} 70.1040,16.7640,4.2683, !- X,Y,Z ==> Vertex 2 {m} 60.9600,16.7640,4.2683, !- X,Y,Z ==> Vertex 3 {m} 60.9600,16.7640,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR_NurseStn_Lobby_Flr_2_Wall_1_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name OR_NurseStn_Lobby_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR_NurseStn_Lobby_Flr_2_Wall_1_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,22.8600,8.5366, !- X,Y,Z ==> Vertex 1 {m} 39.6240,22.8600,4.2683, !- X,Y,Z ==> Vertex 2 {m} 39.6240,0.0000,4.2683, !- X,Y,Z ==> Vertex 3 {m} 39.6240,0.0000,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR_NurseStn_Lobby_Flr_2_Wall_2_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name OR_NurseStn_Lobby_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR_NurseStn_Lobby_Flr_2_Wall_2_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 48.7680,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m} 48.7680,53.3400,4.2683, !- X,Y,Z ==> Vertex 2 {m} 48.7680,22.8600,4.2683, !- X,Y,Z ==> Vertex 3 {m} 48.7680,22.8600,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR_NurseStn_Lobby_Flr_2_Wall_1_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name OR_NurseStn_Lobby_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR_NurseStn_Lobby_Flr_2_Wall_1_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,0.0000,8.5366, !- X,Y,Z ==> Vertex 1 {m} 70.1040,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m} 70.1040,16.7640,4.2683, !- X,Y,Z ==> Vertex 3 {m} 70.1040,16.7640,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR_NurseStn_Lobby_Flr_2_Wall_2_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name OR_NurseStn_Lobby_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR_NurseStn_Lobby_Flr_2_Wall_2_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,16.7640,8.5366, !- X,Y,Z ==> Vertex 1 {m} 60.9600,16.7640,4.2683, !- X,Y,Z ==> Vertex 2 {m} 60.9600,53.3400,4.2683, !- X,Y,Z ==> Vertex 3 {m} 60.9600,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, OR_NurseStn_Lobby_Flr_2_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name OR_NurseStn_Lobby_Flr_2, !- Zone Name Surface, !- Outside Boundary Condition OR_NurseStn_Lobby_Flr_2_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 8, !- Number of Vertices 39.6240,0.0000,8.5366, !- X,Y,Z ==> Vertex 1 {m} 70.1040,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m} 70.1040,16.7640,8.5366, !- X,Y,Z ==> Vertex 3 {m} 60.9600,16.7640,8.5366, !- X,Y,Z ==> Vertex 4 {m} 60.9600,53.3400,8.5366, !- X,Y,Z ==> Vertex 5 {m} 48.7680,53.3400,8.5366, !- X,Y,Z ==> Vertex 6 {m} 48.7680,22.8600,8.5366, !- X,Y,Z ==> Vertex 7 {m} 39.6240,22.8600,8.5366; !- X,Y,Z ==> Vertex 8 {m} BuildingSurface:Detailed, PatRoom1_Mult10_Flr_3_Wall_South, !- Name Wall, !- Surface Type res_ext_wall, !- Construction Name PatRoom1_Mult10_Flr_3, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,0.0000,12.8049, !- X,Y,Z ==> Vertex 1 {m} 39.6240,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m} 44.1960,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m} 44.1960,0.0000,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom1_Mult10_Flr_3_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name PatRoom1_Mult10_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom1_Mult10_Flr_3_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 44.1960,4.5720,8.5366, !- X,Y,Z ==> Vertex 1 {m} 44.1960,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m} 39.6240,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m} 39.6240,4.5720,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom1_Mult10_Flr_3_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom1_Mult10_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom1_Mult10_Flr_3_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 44.1960,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 44.1960,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 39.6240,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 39.6240,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom1_Mult10_Flr_3_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom1_Mult10_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom1_Mult10_Flr_3_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 44.1960,0.0000,12.8049, !- X,Y,Z ==> Vertex 1 {m} 44.1960,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m} 44.1960,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 44.1960,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom1_Mult10_Flr_3_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom1_Mult10_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom1_Mult10_Flr_3_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 39.6240,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 39.6240,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m} 39.6240,0.0000,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom1_Mult10_Flr_3_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name PatRoom1_Mult10_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom1_Mult10_Flr_3_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 39.6240,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m} 44.1960,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m} 44.1960,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom2_Flr_3_Wall_East,!- Name Wall, !- Surface Type res_ext_wall, !- Construction Name PatRoom2_Flr_3, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,0.0000,12.8049, !- X,Y,Z ==> Vertex 1 {m} 70.1040,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m} 70.1040,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 70.1040,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom2_Flr_3_Wall_South, !- Name Wall, !- Surface Type res_ext_wall, !- Construction Name PatRoom2_Flr_3, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 62.4840,0.0000,12.8049, !- X,Y,Z ==> Vertex 1 {m} 62.4840,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m} 70.1040,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m} 70.1040,0.0000,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom2_Flr_3_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name PatRoom2_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom2_Flr_3_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,4.5720,8.5366, !- X,Y,Z ==> Vertex 1 {m} 70.1040,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m} 62.4840,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m} 62.4840,4.5720,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom2_Flr_3_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom2_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom2_Flr_3_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 70.1040,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 62.4840,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 62.4840,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom2_Flr_3_Wall_West,!- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom2_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom2_Flr_3_Wall_West,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 62.4840,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 62.4840,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 62.4840,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m} 62.4840,0.0000,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom2_Flr_3_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name PatRoom2_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom2_Flr_3_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 62.4840,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 62.4840,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m} 70.1040,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m} 70.1040,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom3_Mult10_Flr_3_Wall_East, !- Name Wall, !- Surface Type res_ext_wall, !- Construction Name PatRoom3_Mult10_Flr_3, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 70.1040,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 70.1040,8.9920,8.5366, !- X,Y,Z ==> Vertex 3 {m} 70.1040,8.9920,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom3_Mult10_Flr_3_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name PatRoom3_Mult10_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom3_Mult10_Flr_3_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,8.9920,8.5366, !- X,Y,Z ==> Vertex 1 {m} 70.1040,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 65.5320,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 65.5320,8.9920,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom3_Mult10_Flr_3_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom3_Mult10_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom3_Mult10_Flr_3_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,8.9920,12.8049, !- X,Y,Z ==> Vertex 1 {m} 70.1040,8.9920,8.5366, !- X,Y,Z ==> Vertex 2 {m} 65.5320,8.9920,8.5366, !- X,Y,Z ==> Vertex 3 {m} 65.5320,8.9920,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom3_Mult10_Flr_3_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom3_Mult10_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom3_Mult10_Flr_3_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 65.5320,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 65.5320,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 70.1040,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 70.1040,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom3_Mult10_Flr_3_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom3_Mult10_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom3_Mult10_Flr_3_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 65.5320,8.9920,12.8049, !- X,Y,Z ==> Vertex 1 {m} 65.5320,8.9920,8.5366, !- X,Y,Z ==> Vertex 2 {m} 65.5320,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 65.5320,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom3_Mult10_Flr_3_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name PatRoom3_Mult10_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom3_Mult10_Flr_3_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 65.5320,8.9920,12.8049, !- X,Y,Z ==> Vertex 1 {m} 65.5320,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 70.1040,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 70.1040,8.9920,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom4_Flr_3_Wall_North, !- Name Wall, !- Surface Type res_ext_wall, !- Construction Name PatRoom4_Flr_3, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m} 70.1040,53.3400,8.5366, !- X,Y,Z ==> Vertex 2 {m} 62.4840,53.3400,8.5366, !- X,Y,Z ==> Vertex 3 {m} 62.4840,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom4_Flr_3_Wall_East,!- Name Wall, !- Surface Type res_ext_wall, !- Construction Name PatRoom4_Flr_3, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,48.7680,12.8049, !- X,Y,Z ==> Vertex 1 {m} 70.1040,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 70.1040,53.3400,8.5366, !- X,Y,Z ==> Vertex 3 {m} 70.1040,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom4_Flr_3_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name PatRoom4_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom4_Flr_3_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m} 70.1040,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 62.4840,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 62.4840,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom4_Flr_3_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom4_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom4_Flr_3_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 62.4840,48.7680,12.8049, !- X,Y,Z ==> Vertex 1 {m} 62.4840,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 70.1040,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 70.1040,48.7680,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom4_Flr_3_Wall_West,!- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom4_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom4_Flr_3_Wall_West,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 62.4840,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m} 62.4840,53.3400,8.5366, !- X,Y,Z ==> Vertex 2 {m} 62.4840,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 62.4840,48.7680,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom4_Flr_3_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name PatRoom4_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom4_Flr_3_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 62.4840,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m} 62.4840,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 70.1040,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 70.1040,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom5_Mult10_Flr_3_Wall_North, !- Name Wall, !- Surface Type res_ext_wall, !- Construction Name PatRoom5_Mult10_Flr_3, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 44.1960,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m} 44.1960,53.3400,8.5366, !- X,Y,Z ==> Vertex 2 {m} 39.6240,53.3400,8.5366, !- X,Y,Z ==> Vertex 3 {m} 39.6240,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom5_Mult10_Flr_3_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name PatRoom5_Mult10_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom5_Mult10_Flr_3_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 44.1960,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m} 44.1960,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 39.6240,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 39.6240,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom5_Mult10_Flr_3_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom5_Mult10_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom5_Mult10_Flr_3_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 44.1960,48.7680,12.8049, !- X,Y,Z ==> Vertex 1 {m} 44.1960,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 44.1960,53.3400,8.5366, !- X,Y,Z ==> Vertex 3 {m} 44.1960,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom5_Mult10_Flr_3_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom5_Mult10_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom5_Mult10_Flr_3_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,48.7680,12.8049, !- X,Y,Z ==> Vertex 1 {m} 39.6240,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 44.1960,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 44.1960,48.7680,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom5_Mult10_Flr_3_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom5_Mult10_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom5_Mult10_Flr_3_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m} 39.6240,53.3400,8.5366, !- X,Y,Z ==> Vertex 2 {m} 39.6240,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 39.6240,48.7680,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom5_Mult10_Flr_3_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name PatRoom5_Mult10_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom5_Mult10_Flr_3_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m} 39.6240,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 44.1960,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 44.1960,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PhysTherapy_Flr_3_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name PhysTherapy_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PhysTherapy_Flr_3_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,42.6720,8.5366, !- X,Y,Z ==> Vertex 1 {m} 60.9600,19.8120,8.5366, !- X,Y,Z ==> Vertex 2 {m} 39.6240,19.8120,8.5366, !- X,Y,Z ==> Vertex 3 {m} 39.6240,42.6720,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PhysTherapy_Flr_3_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name PhysTherapy_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_3_Wall_2_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 60.9600,42.6720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 39.6240,42.6720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 39.6240,42.6720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PhysTherapy_Flr_3_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name PhysTherapy_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_3_Wall_1_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 1 {m} 60.9600,19.8120,8.5366, !- X,Y,Z ==> Vertex 2 {m} 60.9600,42.6720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 60.9600,42.6720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PhysTherapy_Flr_3_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name PhysTherapy_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_3_Wall_1_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,19.8120,12.8049, !- X,Y,Z ==> Vertex 1 {m} 39.6240,19.8120,8.5366, !- X,Y,Z ==> Vertex 2 {m} 60.9600,19.8120,8.5366, !- X,Y,Z ==> Vertex 3 {m} 60.9600,19.8120,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PhysTherapy_Flr_3_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name PhysTherapy_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_3_Wall_1_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 39.6240,42.6720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 39.6240,19.8120,8.5366, !- X,Y,Z ==> Vertex 3 {m} 39.6240,19.8120,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PhysTherapy_Flr_3_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name PhysTherapy_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PhysTherapy_Flr_3_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 39.6240,19.8120,12.8049, !- X,Y,Z ==> Vertex 2 {m} 60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m} 60.9600,42.6720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom6_Flr_3_Wall_South, !- Name Wall, !- Surface Type res_ext_wall, !- Construction Name PatRoom6_Flr_3, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,12.8049, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m} 6.0960,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m} 6.0960,0.0000,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom6_Flr_3_Wall_West,!- Name Wall, !- Surface Type res_ext_wall, !- Construction Name PatRoom6_Flr_3, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 0.0000,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom6_Flr_3_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name PatRoom6_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom6_Flr_3_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 6.0960,4.5720,8.5366, !- X,Y,Z ==> Vertex 1 {m} 6.0960,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m} 0.0000,4.5720,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom6_Flr_3_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom6_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom6_Flr_3_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 6.0960,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 6.0960,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 0.0000,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 0.0000,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom6_Flr_3_Wall_East,!- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom6_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom6_Flr_3_Wall_East,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 6.0960,0.0000,12.8049, !- X,Y,Z ==> Vertex 1 {m} 6.0960,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m} 6.0960,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 6.0960,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom6_Flr_3_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name PatRoom6_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom6_Flr_3_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m} 6.0960,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m} 6.0960,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom7_Mult10_Flr_3_Wall_West, !- Name Wall, !- Surface Type res_ext_wall, !- Construction Name PatRoom7_Mult10_Flr_3, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,8.9920,12.8049, !- X,Y,Z ==> Vertex 1 {m} 0.0000,8.9920,8.5366, !- X,Y,Z ==> Vertex 2 {m} 0.0000,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 0.0000,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom7_Mult10_Flr_3_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name PatRoom7_Mult10_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom7_Mult10_Flr_3_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5720,8.9920,8.5366, !- X,Y,Z ==> Vertex 1 {m} 4.5720,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 0.0000,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 0.0000,8.9920,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom7_Mult10_Flr_3_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom7_Mult10_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom7_Mult10_Flr_3_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5720,8.9920,12.8049, !- X,Y,Z ==> Vertex 1 {m} 4.5720,8.9920,8.5366, !- X,Y,Z ==> Vertex 2 {m} 0.0000,8.9920,8.5366, !- X,Y,Z ==> Vertex 3 {m} 0.0000,8.9920,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom7_Mult10_Flr_3_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom7_Mult10_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom7_Mult10_Flr_3_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5720,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 4.5720,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 4.5720,8.9920,8.5366, !- X,Y,Z ==> Vertex 3 {m} 4.5720,8.9920,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom7_Mult10_Flr_3_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom7_Mult10_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom7_Mult10_Flr_3_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 0.0000,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 4.5720,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 4.5720,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom7_Mult10_Flr_3_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name PatRoom7_Mult10_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom7_Mult10_Flr_3_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,8.9920,12.8049, !- X,Y,Z ==> Vertex 1 {m} 0.0000,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 4.5720,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 4.5720,8.9920,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom8_Flr_3_Wall_North, !- Name Wall, !- Surface Type res_ext_wall, !- Construction Name PatRoom8_Flr_3, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 6.0960,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m} 6.0960,53.3400,8.5366, !- X,Y,Z ==> Vertex 2 {m} 0.0000,53.3400,8.5366, !- X,Y,Z ==> Vertex 3 {m} 0.0000,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom8_Flr_3_Wall_West,!- Name Wall, !- Surface Type res_ext_wall, !- Construction Name PatRoom8_Flr_3, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m} 0.0000,53.3400,8.5366, !- X,Y,Z ==> Vertex 2 {m} 0.0000,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 0.0000,48.7680,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom8_Flr_3_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name PatRoom8_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom8_Flr_3_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 6.0960,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m} 6.0960,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 0.0000,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 0.0000,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom8_Flr_3_Wall_East,!- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom8_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom8_Flr_3_Wall_East,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 6.0960,48.7680,12.8049, !- X,Y,Z ==> Vertex 1 {m} 6.0960,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 6.0960,53.3400,8.5366, !- X,Y,Z ==> Vertex 3 {m} 6.0960,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom8_Flr_3_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom8_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom8_Flr_3_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,48.7680,12.8049, !- X,Y,Z ==> Vertex 1 {m} 0.0000,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 6.0960,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 6.0960,48.7680,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom8_Flr_3_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name PatRoom8_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PatRoom8_Flr_3_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m} 0.0000,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 6.0960,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 6.0960,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_3_Wall_1_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name NurseStn_Lobby_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PhysTherapy_Flr_3_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 1 {m} 60.9600,19.8120,8.5366, !- X,Y,Z ==> Vertex 2 {m} 39.6240,19.8120,8.5366, !- X,Y,Z ==> Vertex 3 {m} 39.6240,19.8120,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_3_Wall_1_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name NurseStn_Lobby_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PhysTherapy_Flr_3_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,19.8120,12.8049, !- X,Y,Z ==> Vertex 1 {m} 39.6240,19.8120,8.5366, !- X,Y,Z ==> Vertex 2 {m} 39.6240,42.6720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 39.6240,42.6720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_3_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name NurseStn_Lobby_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_3_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 10, !- Number of Vertices 9.1440,42.6720,8.5366, !- X,Y,Z ==> Vertex 1 {m} 39.6240,42.6720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 39.6240,19.8120,8.5366, !- X,Y,Z ==> Vertex 3 {m} 60.9600,19.8120,8.5366, !- X,Y,Z ==> Vertex 4 {m} 60.9600,10.6680,8.5366, !- X,Y,Z ==> Vertex 5 {m} 28.9560,10.6680,8.5366, !- X,Y,Z ==> Vertex 6 {m} 28.9560,19.8120,8.5366, !- X,Y,Z ==> Vertex 7 {m} 15.2400,19.8120,8.5366, !- X,Y,Z ==> Vertex 8 {m} 15.2400,33.5280,8.5366, !- X,Y,Z ==> Vertex 9 {m} 9.1440,33.5280,8.5366; !- X,Y,Z ==> Vertex 10 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_3_Wall_2_North, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name NurseStn_Lobby_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_3_Wall_3_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 39.6240,42.6720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 9.1440,42.6720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 9.1440,42.6720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_3_Wall_2_East, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name NurseStn_Lobby_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_3_Wall_2_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,10.6680,12.8049, !- X,Y,Z ==> Vertex 1 {m} 60.9600,10.6680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 60.9600,19.8120,8.5366, !- X,Y,Z ==> Vertex 3 {m} 60.9600,19.8120,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_3_Wall_1_South, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name NurseStn_Lobby_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_3_Wall_1_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 1 {m} 28.9560,10.6680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 60.9600,10.6680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 60.9600,10.6680,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_3_Wall_1_West, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name NurseStn_Lobby_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_3_Wall_1_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure 0.0, !- View Factor to Ground 4, !- Number of Vertices 9.1440,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 9.1440,42.6720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 9.1440,33.5280,8.5366, !- X,Y,Z ==> Vertex 3 {m} 9.1440,33.5280,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_3_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name NurseStn_Lobby_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_3_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 10, !- Number of Vertices 9.1440,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 9.1440,33.5280,12.8049, !- X,Y,Z ==> Vertex 2 {m} 15.2400,33.5280,12.8049, !- X,Y,Z ==> Vertex 3 {m} 15.2400,19.8120,12.8049, !- X,Y,Z ==> Vertex 4 {m} 28.9560,19.8120,12.8049, !- X,Y,Z ==> Vertex 5 {m} 28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 6 {m} 60.9600,10.6680,12.8049, !- X,Y,Z ==> Vertex 7 {m} 60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 8 {m} 39.6240,19.8120,12.8049, !- X,Y,Z ==> Vertex 9 {m} 39.6240,42.6720,12.8049; !- X,Y,Z ==> Vertex 10 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_3_Wall_2_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name NurseStn_Lobby_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Lab_Flr_3_Wall_1_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,33.5280,12.8049, !- X,Y,Z ==> Vertex 1 {m} 9.1440,33.5280,8.5366, !- X,Y,Z ==> Vertex 2 {m} 15.2400,33.5280,8.5366, !- X,Y,Z ==> Vertex 3 {m} 15.2400,33.5280,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_3_Wall_3_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name NurseStn_Lobby_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Lab_Flr_3_Wall_2_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.2400,19.8120,12.8049, !- X,Y,Z ==> Vertex 1 {m} 15.2400,19.8120,8.5366, !- X,Y,Z ==> Vertex 2 {m} 28.9560,19.8120,8.5366, !- X,Y,Z ==> Vertex 3 {m} 28.9560,19.8120,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_3_Wall_2_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name NurseStn_Lobby_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Lab_Flr_3_Wall_1_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.2400,33.5280,12.8049, !- X,Y,Z ==> Vertex 1 {m} 15.2400,33.5280,8.5366, !- X,Y,Z ==> Vertex 2 {m} 15.2400,19.8120,8.5366, !- X,Y,Z ==> Vertex 3 {m} 15.2400,19.8120,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_3_Wall_3_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name NurseStn_Lobby_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Lab_Flr_3_Wall_2_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,19.8120,12.8049, !- X,Y,Z ==> Vertex 1 {m} 28.9560,19.8120,8.5366, !- X,Y,Z ==> Vertex 2 {m} 28.9560,10.6680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 28.9560,10.6680,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lab_Flr_3_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Lab_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Lab_Flr_3_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 6, !- Number of Vertices 9.1440,33.5280,8.5366, !- X,Y,Z ==> Vertex 1 {m} 15.2400,33.5280,8.5366, !- X,Y,Z ==> Vertex 2 {m} 15.2400,19.8120,8.5366, !- X,Y,Z ==> Vertex 3 {m} 28.9560,19.8120,8.5366, !- X,Y,Z ==> Vertex 4 {m} 28.9560,10.6680,8.5366, !- X,Y,Z ==> Vertex 5 {m} 9.1440,10.6680,8.5366; !- X,Y,Z ==> Vertex 6 {m} BuildingSurface:Detailed, Lab_Flr_3_Wall_1_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name Lab_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_3_Wall_2_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.2400,33.5280,12.8049, !- X,Y,Z ==> Vertex 1 {m} 15.2400,33.5280,8.5366, !- X,Y,Z ==> Vertex 2 {m} 9.1440,33.5280,8.5366, !- X,Y,Z ==> Vertex 3 {m} 9.1440,33.5280,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lab_Flr_3_Wall_2_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name Lab_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_3_Wall_3_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,19.8120,12.8049, !- X,Y,Z ==> Vertex 1 {m} 28.9560,19.8120,8.5366, !- X,Y,Z ==> Vertex 2 {m} 15.2400,19.8120,8.5366, !- X,Y,Z ==> Vertex 3 {m} 15.2400,19.8120,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lab_Flr_3_Wall_1_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Lab_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_3_Wall_2_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.2400,19.8120,12.8049, !- X,Y,Z ==> Vertex 1 {m} 15.2400,19.8120,8.5366, !- X,Y,Z ==> Vertex 2 {m} 15.2400,33.5280,8.5366, !- X,Y,Z ==> Vertex 3 {m} 15.2400,33.5280,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lab_Flr_3_Wall_2_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Lab_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_3_Wall_3_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 1 {m} 28.9560,10.6680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 28.9560,19.8120,8.5366, !- X,Y,Z ==> Vertex 3 {m} 28.9560,19.8120,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lab_Flr_3_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name Lab_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_3_Wall_2_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,10.6680,12.8049, !- X,Y,Z ==> Vertex 1 {m} 9.1440,10.6680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 28.9560,10.6680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 28.9560,10.6680,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lab_Flr_3_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Lab_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Lab_Flr_3_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 6, !- Number of Vertices 9.1440,33.5280,12.8049, !- X,Y,Z ==> Vertex 1 {m} 9.1440,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 28.9560,19.8120,12.8049, !- X,Y,Z ==> Vertex 4 {m} 15.2400,19.8120,12.8049, !- X,Y,Z ==> Vertex 5 {m} 15.2400,33.5280,12.8049; !- X,Y,Z ==> Vertex 6 {m} BuildingSurface:Detailed, Lab_Flr_3_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Lab_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_3_Wall_4_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,33.5820,12.8049, !- X,Y,Z ==> Vertex 1 {m} 9.1440,33.5820,8.5366, !- X,Y,Z ==> Vertex 2 {m} 9.1440,10.6680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 9.1440,10.6680,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_SE_Flr_3_Wall_1_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_SE_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PhysTherapy_Flr_3_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 60.9600,42.6720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 60.9600,19.8120,8.5366, !- X,Y,Z ==> Vertex 3 {m} 60.9600,19.8120,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_SE_Flr_3_Wall_2_West, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name Corridor_SE_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_3_Wall_2_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 1 {m} 60.9600,19.8120,8.5366, !- X,Y,Z ==> Vertex 2 {m} 60.9600,10.6680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 60.9600,10.6680,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_SE_Flr_3_Wall_1_North, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name Corridor_SE_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_3_Wall_1_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,10.6680,12.8049, !- X,Y,Z ==> Vertex 1 {m} 60.9600,10.6680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 28.9560,10.6680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 28.9560,10.6680,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_SE_Flr_3_Wall_2_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_SE_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Lab_Flr_3_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 1 {m} 28.9560,10.6680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 9.1440,10.6680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 9.1440,10.6680,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_SE_Flr_3_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Corridor_SE_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_3_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 10, !- Number of Vertices 4.5720,4.5720,8.5366, !- X,Y,Z ==> Vertex 1 {m} 4.5720,10.6680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 60.9600,10.6680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 60.9600,42.6720,8.5366, !- X,Y,Z ==> Vertex 4 {m} 65.5320,42.6720,8.5366, !- X,Y,Z ==> Vertex 5 {m} 65.5320,4.5720,8.5366, !- X,Y,Z ==> Vertex 6 {m} 39.6240,4.5720,8.5366, !- X,Y,Z ==> Vertex 7 {m} 39.6240,0.0000,8.5366, !- X,Y,Z ==> Vertex 8 {m} 28.9560,0.0000,8.5366, !- X,Y,Z ==> Vertex 9 {m} 28.9560,4.5720,8.5366; !- X,Y,Z ==> Vertex 10 {m} BuildingSurface:Detailed, Corridor_SE_Flr_3_Wall_1_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_SE_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_3_Wall_1_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 65.5320,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 65.5320,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 65.5320,42.6720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 65.5320,42.6720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_SE_Flr_3_Wall_2_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_SE_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_3_Wall_2_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,0.0000,12.8049, !- X,Y,Z ==> Vertex 1 {m} 39.6240,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m} 39.6240,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 39.6240,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_SE_Flr_3_Wall_1_South, !- Name Wall, !- Surface Type res_ext_wall, !- Construction Name Corridor_SE_Flr_3, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,0.0000,12.8049, !- X,Y,Z ==> Vertex 1 {m} 28.9560,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m} 39.6240,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m} 39.6240,0.0000,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_SE_Flr_3_Wall_2_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_SE_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_3_Wall_2_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5720,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 4.5720,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 28.9560,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 28.9560,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_SE_Flr_3_Wall_3_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_SE_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_3_Wall_3_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 39.6240,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 65.5320,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 65.5320,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_SE_Flr_3_Wall_3_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_SE_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_3_Wall_3_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5720,10.6680,12.8049, !- X,Y,Z ==> Vertex 1 {m} 4.5720,10.6680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 4.5720,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 4.5720,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_SE_Flr_3_Wall_4_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_SE_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_3_Wall_4_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 28.9560,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 28.9560,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m} 28.9560,0.0000,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_SE_Flr_3_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Corridor_SE_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_3_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 10, !- Number of Vertices 4.5720,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 28.9560,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 28.9560,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m} 39.6240,0.0000,12.8049, !- X,Y,Z ==> Vertex 4 {m} 39.6240,4.5720,12.8049, !- X,Y,Z ==> Vertex 5 {m} 65.5320,4.5720,12.8049, !- X,Y,Z ==> Vertex 6 {m} 65.5320,42.6720,12.8049, !- X,Y,Z ==> Vertex 7 {m} 60.9600,42.6720,12.8049, !- X,Y,Z ==> Vertex 8 {m} 60.9600,10.6680,12.8049, !- X,Y,Z ==> Vertex 9 {m} 4.5720,10.6680,12.8049; !- X,Y,Z ==> Vertex 10 {m} BuildingSurface:Detailed, Corridor_SE_Flr_3_Wall_3_North, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name Corridor_SE_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_3_Wall_4_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 65.5320,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 65.5320,42.6720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 60.9600,42.6720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 60.9600,42.6720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_3_Wall_1_South, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name Corridor_SE_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_3_Wall_5_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,10.6680,12.8049, !- X,Y,Z ==> Vertex 1 {m} 9.1440,10.6680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 4.5720,10.6680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 4.5720,10.6680,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_3_Wall_2_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_NW_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition PhysTherapy_Flr_3_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 39.6240,42.6720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 60.9600,42.6720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 60.9600,42.6720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_3_Wall_3_South, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name Corridor_NW_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_3_Wall_2_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 9.1440,42.6720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 39.6240,42.6720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 39.6240,42.6720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_3_Wall_1_East, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name Corridor_NW_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_3_Wall_1_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure 0.0, !- View Factor to Ground 4, !- Number of Vertices 9.1440,33.5820,12.8049, !- X,Y,Z ==> Vertex 1 {m} 9.1440,33.5820,8.5366, !- X,Y,Z ==> Vertex 2 {m} 9.1440,42.6720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 9.1440,42.6720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_3_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Corridor_NW_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_3_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 10, !- Number of Vertices 4.5720,10.6680,8.5366, !- X,Y,Z ==> Vertex 1 {m} 4.5720,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 28.9560,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 28.9560,53.3400,8.5366, !- X,Y,Z ==> Vertex 4 {m} 39.6240,53.3400,8.5366, !- X,Y,Z ==> Vertex 5 {m} 39.6240,48.7680,8.5366, !- X,Y,Z ==> Vertex 6 {m} 65.5320,48.7680,8.5366, !- X,Y,Z ==> Vertex 7 {m} 65.5320,42.6720,8.5366, !- X,Y,Z ==> Vertex 8 {m} 9.1440,42.6720,8.5366, !- X,Y,Z ==> Vertex 9 {m} 9.1440,10.6680,8.5366; !- X,Y,Z ==> Vertex 10 {m} BuildingSurface:Detailed, Corridor_NW_Flr_3_Wall_1_North, !- Name Wall, !- Surface Type res_ext_wall, !- Construction Name Corridor_NW_Flr_3, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m} 39.6240,53.3400,8.5366, !- X,Y,Z ==> Vertex 2 {m} 28.9560,53.3400,8.5366, !- X,Y,Z ==> Vertex 3 {m} 28.9560,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_3_Wall_2_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_NW_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_3_Wall_2_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,48.7680,12.8049, !- X,Y,Z ==> Vertex 1 {m} 28.9560,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 4.5720,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 4.5720,48.7680,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_3_Wall_3_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_NW_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_3_Wall_3_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 65.5320,48.7680,12.8049, !- X,Y,Z ==> Vertex 1 {m} 65.5320,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 39.6240,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 39.6240,48.7680,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_3_Wall_2_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_NW_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_3_Wall_2_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,48.7680,12.8049, !- X,Y,Z ==> Vertex 1 {m} 39.6240,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 39.6240,53.3400,8.5366, !- X,Y,Z ==> Vertex 3 {m} 39.6240,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_3_Wall_3_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_NW_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_3_Wall_3_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 65.5320,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 65.5320,42.6720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 65.5320,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 65.5320,48.7680,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_3_Wall_4_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_NW_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Lab_Flr_3_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,10.6680,12.8049, !- X,Y,Z ==> Vertex 1 {m} 9.1440,10.6680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 9.1440,33.5820,8.5366, !- X,Y,Z ==> Vertex 3 {m} 9.1440,33.5820,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_3_Wall_4_South, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name Corridor_NW_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_3_Wall_3_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 60.9600,42.6720,8.5366, !- X,Y,Z ==> Vertex 2 {m} 65.5320,42.6720,8.5366, !- X,Y,Z ==> Vertex 3 {m} 65.5320,42.6720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_3_Wall_5_South, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name Corridor_NW_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_3_Wall_1_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5720,10.6680,12.8049, !- X,Y,Z ==> Vertex 1 {m} 4.5720,10.6680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 9.1440,10.6680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 9.1440,10.6680,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_3_Wall_1_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_NW_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_3_Wall_1_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m} 28.9560,53.3400,8.5366, !- X,Y,Z ==> Vertex 2 {m} 28.9560,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 28.9560,48.7680,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_3_Wall_2_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_NW_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_3_Wall_2_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5720,48.7680,12.8049, !- X,Y,Z ==> Vertex 1 {m} 4.5720,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m} 4.5720,10.6680,8.5366, !- X,Y,Z ==> Vertex 3 {m} 4.5720,10.6680,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_3_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Corridor_NW_Flr_3, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_3_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 10, !- Number of Vertices 4.5720,10.6680,12.8049, !- X,Y,Z ==> Vertex 1 {m} 9.1440,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 9.1440,42.6720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 65.5320,42.6720,12.8049, !- X,Y,Z ==> Vertex 4 {m} 65.5320,48.7680,12.8049, !- X,Y,Z ==> Vertex 5 {m} 39.6240,48.7680,12.8049, !- X,Y,Z ==> Vertex 6 {m} 39.6240,53.3400,12.8049, !- X,Y,Z ==> Vertex 7 {m} 28.9560,53.3400,12.8049, !- X,Y,Z ==> Vertex 8 {m} 28.9560,48.7680,12.8049, !- X,Y,Z ==> Vertex 9 {m} 4.5720,48.7680,12.8049; !- X,Y,Z ==> Vertex 10 {m} BuildingSurface:Detailed, PatRoom1_Mult10_Flr_4_Wall_South, !- Name Wall, !- Surface Type res_ext_wall, !- Construction Name PatRoom1_Mult10_Flr_4, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,0.0000,17.0732, !- X,Y,Z ==> Vertex 1 {m} 39.6240,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m} 44.1960,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m} 44.1960,0.0000,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom1_Mult10_Flr_4_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name PatRoom1_Mult10_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom1_Mult10_Flr_4_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 44.1960,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 44.1960,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m} 39.6240,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m} 39.6240,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom1_Mult10_Flr_4_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom1_Mult10_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom1_Mult10_Flr_4_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 44.1960,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 44.1960,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 39.6240,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 39.6240,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom1_Mult10_Flr_4_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom1_Mult10_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom1_Mult10_Flr_4_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 44.1960,0.0000,17.0732, !- X,Y,Z ==> Vertex 1 {m} 44.1960,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m} 44.1960,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 44.1960,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom1_Mult10_Flr_4_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom1_Mult10_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom1_Mult10_Flr_4_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 39.6240,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 39.6240,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m} 39.6240,0.0000,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom1_Mult10_Flr_4_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name PatRoom1_Mult10_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom1_Mult10_Flr_4_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 39.6240,0.0000,17.0732, !- X,Y,Z ==> Vertex 2 {m} 44.1960,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m} 44.1960,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom2_Flr_4_Wall_East,!- Name Wall, !- Surface Type res_ext_wall, !- Construction Name PatRoom2_Flr_4, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,0.0000,17.0732, !- X,Y,Z ==> Vertex 1 {m} 70.1040,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m} 70.1040,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 70.1040,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom2_Flr_4_Wall_South, !- Name Wall, !- Surface Type res_ext_wall, !- Construction Name PatRoom2_Flr_4, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 62.4840,0.0000,17.0732, !- X,Y,Z ==> Vertex 1 {m} 62.4840,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m} 70.1040,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m} 70.1040,0.0000,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom2_Flr_4_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name PatRoom2_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom2_Flr_4_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 70.1040,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m} 62.4840,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m} 62.4840,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom2_Flr_4_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom2_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom2_Flr_4_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 70.1040,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 62.4840,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 62.4840,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom2_Flr_4_Wall_West,!- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom2_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom2_Flr_4_Wall_West,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 62.4840,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 62.4840,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 62.4840,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m} 62.4840,0.0000,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom2_Flr_4_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name PatRoom2_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom2_Flr_4_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 62.4840,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 62.4840,0.0000,17.0732, !- X,Y,Z ==> Vertex 2 {m} 70.1040,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m} 70.1040,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom3_Mult10_Flr_4_Wall_East, !- Name Wall, !- Surface Type res_ext_wall, !- Construction Name PatRoom3_Mult10_Flr_4, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 70.1040,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 70.1040,8.9920,12.8049, !- X,Y,Z ==> Vertex 3 {m} 70.1040,8.9920,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom3_Mult10_Flr_4_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name PatRoom3_Mult10_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom3_Mult10_Flr_4_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,8.9920,12.8049, !- X,Y,Z ==> Vertex 1 {m} 70.1040,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 65.5320,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 65.5320,8.9920,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom3_Mult10_Flr_4_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom3_Mult10_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom3_Mult10_Flr_4_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,8.9920,17.0732, !- X,Y,Z ==> Vertex 1 {m} 70.1040,8.9920,12.8049, !- X,Y,Z ==> Vertex 2 {m} 65.5320,8.9920,12.8049, !- X,Y,Z ==> Vertex 3 {m} 65.5320,8.9920,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom3_Mult10_Flr_4_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom3_Mult10_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom3_Mult10_Flr_4_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 65.5320,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 65.5320,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 70.1040,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 70.1040,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom3_Mult10_Flr_4_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom3_Mult10_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom3_Mult10_Flr_4_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 65.5320,8.9920,17.0732, !- X,Y,Z ==> Vertex 1 {m} 65.5320,8.9920,12.8049, !- X,Y,Z ==> Vertex 2 {m} 65.5320,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 65.5320,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom3_Mult10_Flr_4_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name PatRoom3_Mult10_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom3_Mult10_Flr_4_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 65.5320,8.9920,17.0732, !- X,Y,Z ==> Vertex 1 {m} 65.5320,4.5720,17.0732, !- X,Y,Z ==> Vertex 2 {m} 70.1040,4.5720,17.0732, !- X,Y,Z ==> Vertex 3 {m} 70.1040,8.9920,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom4_Flr_4_Wall_North, !- Name Wall, !- Surface Type res_ext_wall, !- Construction Name PatRoom4_Flr_4, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m} 70.1040,53.3400,12.8049, !- X,Y,Z ==> Vertex 2 {m} 62.4840,53.3400,12.8049, !- X,Y,Z ==> Vertex 3 {m} 62.4840,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom4_Flr_4_Wall_East,!- Name Wall, !- Surface Type res_ext_wall, !- Construction Name PatRoom4_Flr_4, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,48.7680,17.0732, !- X,Y,Z ==> Vertex 1 {m} 70.1040,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 70.1040,53.3400,12.8049, !- X,Y,Z ==> Vertex 3 {m} 70.1040,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom4_Flr_4_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name PatRoom4_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom4_Flr_4_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m} 70.1040,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 62.4840,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 62.4840,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom4_Flr_4_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom4_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom4_Flr_4_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 62.4840,48.7680,17.0732, !- X,Y,Z ==> Vertex 1 {m} 62.4840,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 70.1040,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 70.1040,48.7680,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom4_Flr_4_Wall_West,!- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom4_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom4_Flr_4_Wall_West,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 62.4840,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m} 62.4840,53.3400,12.8049, !- X,Y,Z ==> Vertex 2 {m} 62.4840,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 62.4840,48.7680,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom4_Flr_4_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name PatRoom4_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom4_Flr_4_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 62.4840,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m} 62.4840,48.7680,17.0732, !- X,Y,Z ==> Vertex 2 {m} 70.1040,48.7680,17.0732, !- X,Y,Z ==> Vertex 3 {m} 70.1040,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom5_Mult10_Flr_4_Wall_North, !- Name Wall, !- Surface Type res_ext_wall, !- Construction Name PatRoom5_Mult10_Flr_4, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 44.1960,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m} 44.1960,53.3400,12.8049, !- X,Y,Z ==> Vertex 2 {m} 39.6240,53.3400,12.8049, !- X,Y,Z ==> Vertex 3 {m} 39.6240,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom5_Mult10_Flr_4_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name PatRoom5_Mult10_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom5_Mult10_Flr_4_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 44.1960,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m} 44.1960,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 39.6240,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 39.6240,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom5_Mult10_Flr_4_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom5_Mult10_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom5_Mult10_Flr_4_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 44.1960,48.7680,17.0732, !- X,Y,Z ==> Vertex 1 {m} 44.1960,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 44.1960,53.3400,12.8049, !- X,Y,Z ==> Vertex 3 {m} 44.1960,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom5_Mult10_Flr_4_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom5_Mult10_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom5_Mult10_Flr_4_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,48.7680,17.0732, !- X,Y,Z ==> Vertex 1 {m} 39.6240,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 44.1960,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 44.1960,48.7680,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom5_Mult10_Flr_4_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom5_Mult10_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom5_Mult10_Flr_4_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m} 39.6240,53.3400,12.8049, !- X,Y,Z ==> Vertex 2 {m} 39.6240,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 39.6240,48.7680,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom5_Mult10_Flr_4_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name PatRoom5_Mult10_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom5_Mult10_Flr_4_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m} 39.6240,48.7680,17.0732, !- X,Y,Z ==> Vertex 2 {m} 44.1960,48.7680,17.0732, !- X,Y,Z ==> Vertex 3 {m} 44.1960,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Radiology_Flr_4_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Radiology_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Radiology_Flr_4_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 2 {m} 39.6240,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m} 39.6240,42.6720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Radiology_Flr_4_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name Radiology_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_4_Wall_2_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,42.6720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 60.9600,42.6720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 39.6240,42.6720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 39.6240,42.6720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Radiology_Flr_4_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Radiology_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_4_Wall_1_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,19.8120,17.0732, !- X,Y,Z ==> Vertex 1 {m} 60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 2 {m} 60.9600,42.6720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 60.9600,42.6720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Radiology_Flr_4_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name Radiology_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_4_Wall_1_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,19.8120,17.0732, !- X,Y,Z ==> Vertex 1 {m} 39.6240,19.8120,12.8049, !- X,Y,Z ==> Vertex 2 {m} 60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m} 60.9600,19.8120,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Radiology_Flr_4_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Radiology_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_4_Wall_1_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,42.6720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 39.6240,42.6720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 39.6240,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m} 39.6240,19.8120,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Radiology_Flr_4_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Radiology_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Radiology_Flr_4_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,42.6720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 39.6240,19.8120,17.0732, !- X,Y,Z ==> Vertex 2 {m} 60.9600,19.8120,17.0732, !- X,Y,Z ==> Vertex 3 {m} 60.9600,42.6720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom6_Flr_4_Wall_South, !- Name Wall, !- Surface Type res_ext_wall, !- Construction Name PatRoom6_Flr_4, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,17.0732, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m} 6.0960,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m} 6.0960,0.0000,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom6_Flr_4_Wall_West,!- Name Wall, !- Surface Type res_ext_wall, !- Construction Name PatRoom6_Flr_4, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 0.0000,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom6_Flr_4_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name PatRoom6_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom6_Flr_4_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 6.0960,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 6.0960,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m} 0.0000,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom6_Flr_4_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom6_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom6_Flr_4_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 6.0960,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 6.0960,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 0.0000,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 0.0000,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom6_Flr_4_Wall_East,!- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom6_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom6_Flr_4_Wall_East,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 6.0960,0.0000,17.0732, !- X,Y,Z ==> Vertex 1 {m} 6.0960,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m} 6.0960,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 6.0960,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom6_Flr_4_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name PatRoom6_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom6_Flr_4_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,17.0732, !- X,Y,Z ==> Vertex 2 {m} 6.0960,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m} 6.0960,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom7_Mult10_Flr_4_Wall_West, !- Name Wall, !- Surface Type res_ext_wall, !- Construction Name PatRoom7_Mult10_Flr_4, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,8.9920,17.0732, !- X,Y,Z ==> Vertex 1 {m} 0.0000,8.9920,12.8049, !- X,Y,Z ==> Vertex 2 {m} 0.0000,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 0.0000,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom7_Mult10_Flr_4_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name PatRoom7_Mult10_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom7_Mult10_Flr_4_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5720,8.9920,12.8049, !- X,Y,Z ==> Vertex 1 {m} 4.5720,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 0.0000,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 0.0000,8.9920,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom7_Mult10_Flr_4_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom7_Mult10_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom7_Mult10_Flr_4_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5720,8.9920,17.0732, !- X,Y,Z ==> Vertex 1 {m} 4.5720,8.9920,12.8049, !- X,Y,Z ==> Vertex 2 {m} 0.0000,8.9920,12.8049, !- X,Y,Z ==> Vertex 3 {m} 0.0000,8.9920,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom7_Mult10_Flr_4_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom7_Mult10_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom7_Mult10_Flr_4_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5720,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 4.5720,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 4.5720,8.9920,12.8049, !- X,Y,Z ==> Vertex 3 {m} 4.5720,8.9920,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom7_Mult10_Flr_4_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom7_Mult10_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom7_Mult10_Flr_4_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 0.0000,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 4.5720,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 4.5720,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom7_Mult10_Flr_4_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name PatRoom7_Mult10_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom7_Mult10_Flr_4_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,8.9920,17.0732, !- X,Y,Z ==> Vertex 1 {m} 0.0000,4.5720,17.0732, !- X,Y,Z ==> Vertex 2 {m} 4.5720,4.5720,17.0732, !- X,Y,Z ==> Vertex 3 {m} 4.5720,8.9920,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom8_Flr_4_Wall_North, !- Name Wall, !- Surface Type res_ext_wall, !- Construction Name PatRoom8_Flr_4, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 6.0960,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m} 6.0960,53.3400,12.8049, !- X,Y,Z ==> Vertex 2 {m} 0.0000,53.3400,12.8049, !- X,Y,Z ==> Vertex 3 {m} 0.0000,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom8_Flr_4_Wall_West,!- Name Wall, !- Surface Type res_ext_wall, !- Construction Name PatRoom8_Flr_4, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m} 0.0000,53.3400,12.8049, !- X,Y,Z ==> Vertex 2 {m} 0.0000,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 0.0000,48.7680,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom8_Flr_4_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name PatRoom8_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom8_Flr_4_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 6.0960,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m} 6.0960,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 0.0000,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 0.0000,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom8_Flr_4_Wall_East,!- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom8_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom8_Flr_4_Wall_East,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 6.0960,48.7680,17.0732, !- X,Y,Z ==> Vertex 1 {m} 6.0960,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 6.0960,53.3400,12.8049, !- X,Y,Z ==> Vertex 3 {m} 6.0960,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom8_Flr_4_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name PatRoom8_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom8_Flr_4_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,48.7680,17.0732, !- X,Y,Z ==> Vertex 1 {m} 0.0000,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 6.0960,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 6.0960,48.7680,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, PatRoom8_Flr_4_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name PatRoom8_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition PatRoom8_Flr_4_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m} 0.0000,48.7680,17.0732, !- X,Y,Z ==> Vertex 2 {m} 6.0960,48.7680,17.0732, !- X,Y,Z ==> Vertex 3 {m} 6.0960,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_4_Wall_1_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name NurseStn_Lobby_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Radiology_Flr_4_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,19.8120,17.0732, !- X,Y,Z ==> Vertex 1 {m} 60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 2 {m} 39.6240,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m} 39.6240,19.8120,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_4_Wall_1_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name NurseStn_Lobby_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Radiology_Flr_4_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,19.8120,17.0732, !- X,Y,Z ==> Vertex 1 {m} 39.6240,19.8120,12.8049, !- X,Y,Z ==> Vertex 2 {m} 39.6240,42.6720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 39.6240,42.6720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_4_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name NurseStn_Lobby_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_4_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 10, !- Number of Vertices 9.1440,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 39.6240,42.6720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 39.6240,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m} 60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 4 {m} 60.9600,10.6680,12.8049, !- X,Y,Z ==> Vertex 5 {m} 28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 6 {m} 28.9560,19.8120,12.8049, !- X,Y,Z ==> Vertex 7 {m} 15.2400,19.8120,12.8049, !- X,Y,Z ==> Vertex 8 {m} 15.2400,33.5280,12.8049, !- X,Y,Z ==> Vertex 9 {m} 9.1440,33.5280,12.8049; !- X,Y,Z ==> Vertex 10 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_4_Wall_2_North, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name NurseStn_Lobby_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_4_Wall_3_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,42.6720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 39.6240,42.6720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 9.1440,42.6720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 9.1440,42.6720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_4_Wall_2_East, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name NurseStn_Lobby_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_4_Wall_2_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,10.6680,17.0732, !- X,Y,Z ==> Vertex 1 {m} 60.9600,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m} 60.9600,19.8120,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_4_Wall_1_South, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name NurseStn_Lobby_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_4_Wall_1_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,10.6680,17.0732, !- X,Y,Z ==> Vertex 1 {m} 28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 60.9600,10.6680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 60.9600,10.6680,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_4_Wall_1_West, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name NurseStn_Lobby_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_4_Wall_1_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure 0.0, !- View Factor to Ground 4, !- Number of Vertices 9.1440,42.6720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 9.1440,42.6720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 9.1440,33.5280,12.8049, !- X,Y,Z ==> Vertex 3 {m} 9.1440,33.5280,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_4_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name NurseStn_Lobby_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_4_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 10, !- Number of Vertices 9.1440,42.6720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 9.1440,33.5280,17.0732, !- X,Y,Z ==> Vertex 2 {m} 15.2400,33.5280,17.0732, !- X,Y,Z ==> Vertex 3 {m} 15.2400,19.8120,17.0732, !- X,Y,Z ==> Vertex 4 {m} 28.9560,19.8120,17.0732, !- X,Y,Z ==> Vertex 5 {m} 28.9560,10.6680,17.0732, !- X,Y,Z ==> Vertex 6 {m} 60.9600,10.6680,17.0732, !- X,Y,Z ==> Vertex 7 {m} 60.9600,19.8120,17.0732, !- X,Y,Z ==> Vertex 8 {m} 39.6240,19.8120,17.0732, !- X,Y,Z ==> Vertex 9 {m} 39.6240,42.6720,17.0732; !- X,Y,Z ==> Vertex 10 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_4_Wall_2_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name NurseStn_Lobby_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Lab_Flr_4_Wall_1_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,33.5280,17.0732, !- X,Y,Z ==> Vertex 1 {m} 9.1440,33.5280,12.8049, !- X,Y,Z ==> Vertex 2 {m} 15.2400,33.5280,12.8049, !- X,Y,Z ==> Vertex 3 {m} 15.2400,33.5280,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_4_Wall_3_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name NurseStn_Lobby_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Lab_Flr_4_Wall_2_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.2400,19.8120,17.0732, !- X,Y,Z ==> Vertex 1 {m} 15.2400,19.8120,12.8049, !- X,Y,Z ==> Vertex 2 {m} 28.9560,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m} 28.9560,19.8120,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_4_Wall_2_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name NurseStn_Lobby_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Lab_Flr_4_Wall_1_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.2400,33.5280,17.0732, !- X,Y,Z ==> Vertex 1 {m} 15.2400,33.5280,12.8049, !- X,Y,Z ==> Vertex 2 {m} 15.2400,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m} 15.2400,19.8120,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_4_Wall_3_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name NurseStn_Lobby_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Lab_Flr_4_Wall_2_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,19.8120,17.0732, !- X,Y,Z ==> Vertex 1 {m} 28.9560,19.8120,12.8049, !- X,Y,Z ==> Vertex 2 {m} 28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 28.9560,10.6680,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lab_Flr_4_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Lab_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Lab_Flr_4_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 6, !- Number of Vertices 9.1440,33.5280,12.8049, !- X,Y,Z ==> Vertex 1 {m} 15.2400,33.5280,12.8049, !- X,Y,Z ==> Vertex 2 {m} 15.2400,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m} 28.9560,19.8120,12.8049, !- X,Y,Z ==> Vertex 4 {m} 28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 5 {m} 9.1440,10.6680,12.8049; !- X,Y,Z ==> Vertex 6 {m} BuildingSurface:Detailed, Lab_Flr_4_Wall_1_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name Lab_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_4_Wall_2_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.2400,33.5280,17.0732, !- X,Y,Z ==> Vertex 1 {m} 15.2400,33.5280,12.8049, !- X,Y,Z ==> Vertex 2 {m} 9.1440,33.5280,12.8049, !- X,Y,Z ==> Vertex 3 {m} 9.1440,33.5280,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lab_Flr_4_Wall_2_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name Lab_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_4_Wall_3_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,19.8120,17.0732, !- X,Y,Z ==> Vertex 1 {m} 28.9560,19.8120,12.8049, !- X,Y,Z ==> Vertex 2 {m} 15.2400,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m} 15.2400,19.8120,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lab_Flr_4_Wall_1_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Lab_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_4_Wall_2_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.2400,19.8120,17.0732, !- X,Y,Z ==> Vertex 1 {m} 15.2400,19.8120,12.8049, !- X,Y,Z ==> Vertex 2 {m} 15.2400,33.5280,12.8049, !- X,Y,Z ==> Vertex 3 {m} 15.2400,33.5280,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lab_Flr_4_Wall_2_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Lab_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_4_Wall_3_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,10.6680,17.0732, !- X,Y,Z ==> Vertex 1 {m} 28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 28.9560,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m} 28.9560,19.8120,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lab_Flr_4_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name Lab_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_4_Wall_2_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,10.6680,17.0732, !- X,Y,Z ==> Vertex 1 {m} 9.1440,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 28.9560,10.6680,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lab_Flr_4_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Lab_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Lab_Flr_4_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 6, !- Number of Vertices 9.1440,33.5280,17.0732, !- X,Y,Z ==> Vertex 1 {m} 9.1440,10.6680,17.0732, !- X,Y,Z ==> Vertex 2 {m} 28.9560,10.6680,17.0732, !- X,Y,Z ==> Vertex 3 {m} 28.9560,19.8120,17.0732, !- X,Y,Z ==> Vertex 4 {m} 15.2400,19.8120,17.0732, !- X,Y,Z ==> Vertex 5 {m} 15.2400,33.5280,17.0732; !- X,Y,Z ==> Vertex 6 {m} BuildingSurface:Detailed, Lab_Flr_4_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Lab_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_4_Wall_4_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,33.5820,17.0732, !- X,Y,Z ==> Vertex 1 {m} 9.1440,33.5820,12.8049, !- X,Y,Z ==> Vertex 2 {m} 9.1440,10.6680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 9.1440,10.6680,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_SE_Flr_4_Wall_1_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_SE_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Radiology_Flr_4_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,42.6720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 60.9600,42.6720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m} 60.9600,19.8120,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_SE_Flr_4_Wall_2_West, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name Corridor_SE_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_4_Wall_2_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,19.8120,17.0732, !- X,Y,Z ==> Vertex 1 {m} 60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 2 {m} 60.9600,10.6680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 60.9600,10.6680,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_SE_Flr_4_Wall_1_North, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name Corridor_SE_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_4_Wall_1_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,10.6680,17.0732, !- X,Y,Z ==> Vertex 1 {m} 60.9600,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 28.9560,10.6680,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_SE_Flr_4_Wall_2_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_SE_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Lab_Flr_4_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,10.6680,17.0732, !- X,Y,Z ==> Vertex 1 {m} 28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 9.1440,10.6680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 9.1440,10.6680,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_SE_Flr_4_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Corridor_SE_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_4_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 10, !- Number of Vertices 4.5720,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m} 4.5720,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 60.9600,10.6680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 60.9600,42.6720,12.8049, !- X,Y,Z ==> Vertex 4 {m} 65.5320,42.6720,12.8049, !- X,Y,Z ==> Vertex 5 {m} 65.5320,4.5720,12.8049, !- X,Y,Z ==> Vertex 6 {m} 39.6240,4.5720,12.8049, !- X,Y,Z ==> Vertex 7 {m} 39.6240,0.0000,12.8049, !- X,Y,Z ==> Vertex 8 {m} 28.9560,0.0000,12.8049, !- X,Y,Z ==> Vertex 9 {m} 28.9560,4.5720,12.8049; !- X,Y,Z ==> Vertex 10 {m} BuildingSurface:Detailed, Corridor_SE_Flr_4_Wall_1_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_SE_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_4_Wall_1_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 65.5320,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 65.5320,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 65.5320,42.6720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 65.5320,42.6720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_SE_Flr_4_Wall_2_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_SE_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_4_Wall_2_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,0.0000,17.0732, !- X,Y,Z ==> Vertex 1 {m} 39.6240,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m} 39.6240,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 39.6240,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_SE_Flr_4_Wall_1_South, !- Name Wall, !- Surface Type res_ext_wall, !- Construction Name Corridor_SE_Flr_4, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,0.0000,17.0732, !- X,Y,Z ==> Vertex 1 {m} 28.9560,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m} 39.6240,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m} 39.6240,0.0000,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_SE_Flr_4_Wall_2_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_SE_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_4_Wall_2_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5720,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 4.5720,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 28.9560,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 28.9560,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_SE_Flr_4_Wall_3_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_SE_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_4_Wall_3_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 39.6240,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 65.5320,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 65.5320,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_SE_Flr_4_Wall_3_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_SE_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_4_Wall_3_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5720,10.6680,17.0732, !- X,Y,Z ==> Vertex 1 {m} 4.5720,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 4.5720,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 4.5720,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_SE_Flr_4_Wall_4_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_SE_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_4_Wall_4_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 28.9560,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 28.9560,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m} 28.9560,0.0000,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_SE_Flr_4_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Corridor_SE_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_4_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 10, !- Number of Vertices 4.5720,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 28.9560,4.5720,17.0732, !- X,Y,Z ==> Vertex 2 {m} 28.9560,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m} 39.6240,0.0000,17.0732, !- X,Y,Z ==> Vertex 4 {m} 39.6240,4.5720,17.0732, !- X,Y,Z ==> Vertex 5 {m} 65.5320,4.5720,17.0732, !- X,Y,Z ==> Vertex 6 {m} 65.5320,42.6720,17.0732, !- X,Y,Z ==> Vertex 7 {m} 60.9600,42.6720,17.0732, !- X,Y,Z ==> Vertex 8 {m} 60.9600,10.6680,17.0732, !- X,Y,Z ==> Vertex 9 {m} 4.5720,10.6680,17.0732; !- X,Y,Z ==> Vertex 10 {m} BuildingSurface:Detailed, Corridor_SE_Flr_4_Wall_3_North, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name Corridor_SE_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_4_Wall_4_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 65.5320,42.6720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 65.5320,42.6720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 60.9600,42.6720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 60.9600,42.6720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_4_Wall_1_South, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name Corridor_SE_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_4_Wall_5_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,10.6680,17.0732, !- X,Y,Z ==> Vertex 1 {m} 9.1440,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 4.5720,10.6680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 4.5720,10.6680,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_4_Wall_2_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_NW_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Radiology_Flr_4_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,42.6720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 39.6240,42.6720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 60.9600,42.6720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 60.9600,42.6720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_4_Wall_3_South, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name Corridor_NW_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_4_Wall_2_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,42.6720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 9.1440,42.6720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 39.6240,42.6720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 39.6240,42.6720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_4_Wall_1_East, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name Corridor_NW_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_4_Wall_1_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure 0.0, !- View Factor to Ground 4, !- Number of Vertices 9.1440,33.5820,17.0732, !- X,Y,Z ==> Vertex 1 {m} 9.1440,33.5820,12.8049, !- X,Y,Z ==> Vertex 2 {m} 9.1440,42.6720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 9.1440,42.6720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_4_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Corridor_NW_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_4_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 10, !- Number of Vertices 4.5720,10.6680,12.8049, !- X,Y,Z ==> Vertex 1 {m} 4.5720,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 28.9560,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 28.9560,53.3400,12.8049, !- X,Y,Z ==> Vertex 4 {m} 39.6240,53.3400,12.8049, !- X,Y,Z ==> Vertex 5 {m} 39.6240,48.7680,12.8049, !- X,Y,Z ==> Vertex 6 {m} 65.5320,48.7680,12.8049, !- X,Y,Z ==> Vertex 7 {m} 65.5320,42.6720,12.8049, !- X,Y,Z ==> Vertex 8 {m} 9.1440,42.6720,12.8049, !- X,Y,Z ==> Vertex 9 {m} 9.1440,10.6680,12.8049; !- X,Y,Z ==> Vertex 10 {m} BuildingSurface:Detailed, Corridor_NW_Flr_4_Wall_1_North, !- Name Wall, !- Surface Type res_ext_wall, !- Construction Name Corridor_NW_Flr_4, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m} 39.6240,53.3400,12.8049, !- X,Y,Z ==> Vertex 2 {m} 28.9560,53.3400,12.8049, !- X,Y,Z ==> Vertex 3 {m} 28.9560,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_4_Wall_2_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_NW_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_4_Wall_2_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,48.7680,17.0732, !- X,Y,Z ==> Vertex 1 {m} 28.9560,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 4.5720,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 4.5720,48.7680,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_4_Wall_3_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_NW_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_4_Wall_3_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 65.5320,48.7680,17.0732, !- X,Y,Z ==> Vertex 1 {m} 65.5320,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 39.6240,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 39.6240,48.7680,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_4_Wall_2_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_NW_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_4_Wall_2_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,48.7680,17.0732, !- X,Y,Z ==> Vertex 1 {m} 39.6240,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 39.6240,53.3400,12.8049, !- X,Y,Z ==> Vertex 3 {m} 39.6240,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_4_Wall_3_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_NW_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_4_Wall_3_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 65.5320,42.6720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 65.5320,42.6720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 65.5320,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 65.5320,48.7680,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_4_Wall_4_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_NW_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Lab_Flr_4_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,10.6680,17.0732, !- X,Y,Z ==> Vertex 1 {m} 9.1440,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 9.1440,33.5820,12.8049, !- X,Y,Z ==> Vertex 3 {m} 9.1440,33.5820,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_4_Wall_4_South, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name Corridor_NW_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_SE_Flr_4_Wall_3_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,42.6720,17.0732, !- X,Y,Z ==> Vertex 1 {m} 60.9600,42.6720,12.8049, !- X,Y,Z ==> Vertex 2 {m} 65.5320,42.6720,12.8049, !- X,Y,Z ==> Vertex 3 {m} 65.5320,42.6720,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_4_Wall_5_South, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name Corridor_NW_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_4_Wall_1_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5720,10.6680,17.0732, !- X,Y,Z ==> Vertex 1 {m} 4.5720,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 9.1440,10.6680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 9.1440,10.6680,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_4_Wall_1_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_NW_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_4_Wall_1_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 28.9560,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m} 28.9560,53.3400,12.8049, !- X,Y,Z ==> Vertex 2 {m} 28.9560,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 28.9560,48.7680,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_4_Wall_2_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_NW_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_4_Wall_2_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5720,48.7680,17.0732, !- X,Y,Z ==> Vertex 1 {m} 4.5720,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m} 4.5720,10.6680,12.8049, !- X,Y,Z ==> Vertex 3 {m} 4.5720,10.6680,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_NW_Flr_4_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Corridor_NW_Flr_4, !- Zone Name Surface, !- Outside Boundary Condition Corridor_NW_Flr_4_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 10, !- Number of Vertices 4.5720,10.6680,17.0732, !- X,Y,Z ==> Vertex 1 {m} 9.1440,10.6680,17.0732, !- X,Y,Z ==> Vertex 2 {m} 9.1440,42.6720,17.0732, !- X,Y,Z ==> Vertex 3 {m} 65.5320,42.6720,17.0732, !- X,Y,Z ==> Vertex 4 {m} 65.5320,48.7680,17.0732, !- X,Y,Z ==> Vertex 5 {m} 39.6240,48.7680,17.0732, !- X,Y,Z ==> Vertex 6 {m} 39.6240,53.3400,17.0732, !- X,Y,Z ==> Vertex 7 {m} 28.9560,53.3400,17.0732, !- X,Y,Z ==> Vertex 8 {m} 28.9560,48.7680,17.0732, !- X,Y,Z ==> Vertex 9 {m} 4.5720,48.7680,17.0732; !- X,Y,Z ==> Vertex 10 {m} BuildingSurface:Detailed, Dining_Flr_5_Wall_East, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Dining_Flr_5, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,0.0000,21.3415, !- X,Y,Z ==> Vertex 1 {m} 70.1040,0.0000,17.0732, !- X,Y,Z ==> Vertex 2 {m} 70.1040,22.8600,17.0732, !- X,Y,Z ==> Vertex 3 {m} 70.1040,22.8600,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Dining_Flr_5_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Dining_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Dining_Flr_5_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,0.0000,17.0732, !- X,Y,Z ==> Vertex 1 {m} 39.6240,22.8600,17.0732, !- X,Y,Z ==> Vertex 2 {m} 70.1040,22.8600,17.0732, !- X,Y,Z ==> Vertex 3 {m} 70.1040,0.0000,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Dining_Flr_5_Wall_South, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Dining_Flr_5, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,0.0000,21.3415, !- X,Y,Z ==> Vertex 1 {m} 39.6240,0.0000,17.0732, !- X,Y,Z ==> Vertex 2 {m} 70.1040,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m} 70.1040,0.0000,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Dining_Flr_5_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name Dining_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Kitchen_Flr_5_Wall_South,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,22.8600,21.3415, !- X,Y,Z ==> Vertex 1 {m} 70.1040,22.8600,17.0732, !- X,Y,Z ==> Vertex 2 {m} 39.6240,22.8600,17.0732, !- X,Y,Z ==> Vertex 3 {m} 39.6240,22.8600,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Dining_Flr_5_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Dining_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_5_Wall_1_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,22.8600,21.3415, !- X,Y,Z ==> Vertex 1 {m} 39.6240,22.8600,17.0732, !- X,Y,Z ==> Vertex 2 {m} 39.6240,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m} 39.6240,0.0000,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Dining_Flr_5_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Dining_Flr_5, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,0.0000,21.3415, !- X,Y,Z ==> Vertex 1 {m} 70.1040,0.0000,21.3415, !- X,Y,Z ==> Vertex 2 {m} 70.1040,22.8600,21.3415, !- X,Y,Z ==> Vertex 3 {m} 39.6240,22.8600,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_5_Wall_South, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name NurseStn_Lobby_Flr_5, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.2400,0.0000,21.3415, !- X,Y,Z ==> Vertex 1 {m} 15.2400,0.0000,17.0732, !- X,Y,Z ==> Vertex 2 {m} 39.6240,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m} 39.6240,0.0000,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_5_Wall_1_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name NurseStn_Lobby_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Dining_Flr_5_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,0.0000,21.3415, !- X,Y,Z ==> Vertex 1 {m} 39.6240,0.0000,17.0732, !- X,Y,Z ==> Vertex 2 {m} 39.6240,22.8600,17.0732, !- X,Y,Z ==> Vertex 3 {m} 39.6240,22.8600,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_5_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name NurseStn_Lobby_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_5_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.2400,0.0000,17.0732, !- X,Y,Z ==> Vertex 1 {m} 15.2400,42.6720,17.0732, !- X,Y,Z ==> Vertex 2 {m} 39.6240,42.6720,17.0732, !- X,Y,Z ==> Vertex 3 {m} 39.6240,0.0000,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_5_Wall_North, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name NurseStn_Lobby_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Flr_5_Wall_1_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,42.6720,21.3415, !- X,Y,Z ==> Vertex 1 {m} 39.6240,42.6720,17.0732, !- X,Y,Z ==> Vertex 2 {m} 15.2400,42.6720,17.0732, !- X,Y,Z ==> Vertex 3 {m} 15.2400,42.6720,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_5_Wall_2_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name NurseStn_Lobby_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Kitchen_Flr_5_Wall_1_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,22.8600,21.3415, !- X,Y,Z ==> Vertex 1 {m} 39.6240,22.8600,17.0732, !- X,Y,Z ==> Vertex 2 {m} 39.6240,42.6720,17.0732, !- X,Y,Z ==> Vertex 3 {m} 39.6240,42.6720,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_5_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name NurseStn_Lobby_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Flr_5_Wall_1_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.2400,42.6720,21.3415, !- X,Y,Z ==> Vertex 1 {m} 15.2400,42.6720,17.0732, !- X,Y,Z ==> Vertex 2 {m} 15.2400,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m} 15.2400,0.0000,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, NurseStn_Lobby_Flr_5_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name NurseStn_Lobby_Flr_5, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.2400,0.0000,21.3415, !- X,Y,Z ==> Vertex 1 {m} 39.6240,0.0000,21.3415, !- X,Y,Z ==> Vertex 2 {m} 39.6240,42.6720,21.3415, !- X,Y,Z ==> Vertex 3 {m} 15.2400,42.6720,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Kitchen_Flr_5_Wall_South,!- Name Wall, !- Surface Type int_wall, !- Construction Name Kitchen_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Dining_Flr_5_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,22.8600,21.3415, !- X,Y,Z ==> Vertex 1 {m} 39.6240,22.8600,17.0732, !- X,Y,Z ==> Vertex 2 {m} 70.1040,22.8600,17.0732, !- X,Y,Z ==> Vertex 3 {m} 70.1040,22.8600,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Kitchen_Flr_5_Wall_1_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Kitchen_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_5_Wall_2_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,42.6720,21.3415, !- X,Y,Z ==> Vertex 1 {m} 39.6240,42.6720,17.0732, !- X,Y,Z ==> Vertex 2 {m} 39.6240,22.8600,17.0732, !- X,Y,Z ==> Vertex 3 {m} 39.6240,22.8600,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Kitchen_Flr_5_Wall_North,!- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Kitchen_Flr_5, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,53.3400,21.3415, !- X,Y,Z ==> Vertex 1 {m} 70.1040,53.3400,17.0732, !- X,Y,Z ==> Vertex 2 {m} 39.6240,53.3400,17.0732, !- X,Y,Z ==> Vertex 3 {m} 39.6240,53.3400,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Kitchen_Flr_5_Wall_East, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Kitchen_Flr_5, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,22.8600,21.3415, !- X,Y,Z ==> Vertex 1 {m} 70.1040,22.8600,17.0732, !- X,Y,Z ==> Vertex 2 {m} 70.1040,53.3400,17.0732, !- X,Y,Z ==> Vertex 3 {m} 70.1040,53.3400,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Kitchen_Flr_5_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Kitchen_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Kitchen_Flr_5_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 70.1040,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m} 70.1040,22.8600,17.0732, !- X,Y,Z ==> Vertex 2 {m} 39.6240,22.8600,17.0732, !- X,Y,Z ==> Vertex 3 {m} 39.6240,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Kitchen_Flr_5_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Kitchen_Flr_5, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,53.3400,21.3415, !- X,Y,Z ==> Vertex 1 {m} 39.6240,22.8600,21.3415, !- X,Y,Z ==> Vertex 2 {m} 70.1040,22.8600,21.3415, !- X,Y,Z ==> Vertex 3 {m} 70.1040,53.3400,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Kitchen_Flr_5_Wall_2_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Kitchen_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Flr_5_Wall_2_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,53.3400,21.3415, !- X,Y,Z ==> Vertex 1 {m} 39.6240,53.3400,17.0732, !- X,Y,Z ==> Vertex 2 {m} 39.6240,42.6720,17.0732, !- X,Y,Z ==> Vertex 3 {m} 39.6240,42.6720,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office1_Flr_5_Wall_South,!- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Office1_Flr_5, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,21.3415, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,17.0732, !- X,Y,Z ==> Vertex 2 {m} 9.1440,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m} 9.1440,0.0000,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office1_Flr_5_Wall_West, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Office1_Flr_5, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,7.6220,21.3415, !- X,Y,Z ==> Vertex 1 {m} 0.0000,7.6220,17.0732, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office1_Flr_5_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Office1_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Office1_Flr_5_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,7.6220,17.0732, !- X,Y,Z ==> Vertex 1 {m} 9.1440,0.0000,17.0732, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m} 0.0000,7.6220,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office1_Flr_5_Wall_North,!- Name Wall, !- Surface Type int_wall, !- Construction Name Office1_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Office1_Flr_5_Wall_North,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,7.6220,21.3415, !- X,Y,Z ==> Vertex 1 {m} 9.1440,7.6220,17.0732, !- X,Y,Z ==> Vertex 2 {m} 0.0000,7.6220,17.0732, !- X,Y,Z ==> Vertex 3 {m} 0.0000,7.6220,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office1_Flr_5_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Office1_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Office1_Flr_5_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,0.0000,21.3415, !- X,Y,Z ==> Vertex 1 {m} 9.1440,0.0000,17.0732, !- X,Y,Z ==> Vertex 2 {m} 9.1440,7.6220,17.0732, !- X,Y,Z ==> Vertex 3 {m} 9.1440,7.6220,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office1_Flr_5_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Office1_Flr_5, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,7.6220,21.3415, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,21.3415, !- X,Y,Z ==> Vertex 2 {m} 9.1440,0.0000,21.3415, !- X,Y,Z ==> Vertex 3 {m} 9.1440,7.6220,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office2_Mult5_Flr_5_Wall_West, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Office2_Mult5_Flr_5, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,15.2400,21.3415, !- X,Y,Z ==> Vertex 1 {m} 0.0000,15.2400,17.0732, !- X,Y,Z ==> Vertex 2 {m} 0.0000,7.6220,17.0732, !- X,Y,Z ==> Vertex 3 {m} 0.0000,7.6220,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office2_Mult5_Flr_5_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Office2_Mult5_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Office2_Mult5_Flr_5_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,15.2400,17.0732, !- X,Y,Z ==> Vertex 1 {m} 9.1440,7.6200,17.0732, !- X,Y,Z ==> Vertex 2 {m} 0.0000,7.6200,17.0732, !- X,Y,Z ==> Vertex 3 {m} 0.0000,15.2400,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office2_Mult5_Flr_5_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name Office2_Mult5_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Office2_Mult5_Flr_5_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,15.2400,21.3415, !- X,Y,Z ==> Vertex 1 {m} 9.1440,15.2400,17.0732, !- X,Y,Z ==> Vertex 2 {m} 0.0000,15.2400,17.0732, !- X,Y,Z ==> Vertex 3 {m} 0.0000,15.2400,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office2_Mult5_Flr_5_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Office2_Mult5_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Office2_Mult5_Flr_5_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,7.6220,21.3415, !- X,Y,Z ==> Vertex 1 {m} 9.1440,7.6220,17.0732, !- X,Y,Z ==> Vertex 2 {m} 9.1440,15.2400,17.0732, !- X,Y,Z ==> Vertex 3 {m} 9.1440,15.2400,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office2_Mult5_Flr_5_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name Office2_Mult5_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Office2_Mult5_Flr_5_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,7.6220,21.3415, !- X,Y,Z ==> Vertex 1 {m} 0.0000,7.6220,17.0732, !- X,Y,Z ==> Vertex 2 {m} 9.1440,7.6220,17.0732, !- X,Y,Z ==> Vertex 3 {m} 9.1440,7.6220,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office2_Mult5_Flr_5_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Office2_Mult5_Flr_5, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,15.2400,21.3415, !- X,Y,Z ==> Vertex 1 {m} 0.0000,7.6200,21.3415, !- X,Y,Z ==> Vertex 2 {m} 9.1440,7.6200,21.3415, !- X,Y,Z ==> Vertex 3 {m} 9.1440,15.2400,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office3_Flr_5_Wall_North,!- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Office3_Flr_5, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,53.3400,21.3415, !- X,Y,Z ==> Vertex 1 {m} 9.1440,53.3400,17.0732, !- X,Y,Z ==> Vertex 2 {m} 0.0000,53.3400,17.0732, !- X,Y,Z ==> Vertex 3 {m} 0.0000,53.3400,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office3_Flr_5_Wall_West, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Office3_Flr_5, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,53.3400,21.3415, !- X,Y,Z ==> Vertex 1 {m} 0.0000,53.3400,17.0732, !- X,Y,Z ==> Vertex 2 {m} 0.0000,45.7200,17.0732, !- X,Y,Z ==> Vertex 3 {m} 0.0000,45.7200,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office3_Flr_5_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Office3_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Office3_Flr_5_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m} 9.1440,45.7200,17.0732, !- X,Y,Z ==> Vertex 2 {m} 0.0000,45.7200,17.0732, !- X,Y,Z ==> Vertex 3 {m} 0.0000,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office3_Flr_5_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Office3_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Office3_Flr_5_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,45.7200,21.3415, !- X,Y,Z ==> Vertex 1 {m} 9.1440,45.7200,17.0732, !- X,Y,Z ==> Vertex 2 {m} 9.1440,53.3400,17.0732, !- X,Y,Z ==> Vertex 3 {m} 9.1440,53.3400,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office3_Flr_5_Wall_South,!- Name Wall, !- Surface Type int_wall, !- Construction Name Office3_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Office3_Flr_5_Wall_South,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,45.7200,21.3415, !- X,Y,Z ==> Vertex 1 {m} 0.0000,45.7200,17.0732, !- X,Y,Z ==> Vertex 2 {m} 9.1440,45.7200,17.0732, !- X,Y,Z ==> Vertex 3 {m} 9.1440,45.7200,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office3_Flr_5_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Office3_Flr_5, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,53.3400,21.3415, !- X,Y,Z ==> Vertex 1 {m} 0.0000,45.7200,21.3415, !- X,Y,Z ==> Vertex 2 {m} 9.1440,45.7200,21.3415, !- X,Y,Z ==> Vertex 3 {m} 9.1440,53.3400,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office4_Mult6_Flr_5_Wall_North, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Office4_Mult6_Flr_5, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 12.1920,53.3400,21.3415, !- X,Y,Z ==> Vertex 1 {m} 12.1920,53.3400,17.0732, !- X,Y,Z ==> Vertex 2 {m} 9.1440,53.3400,17.0732, !- X,Y,Z ==> Vertex 3 {m} 9.1440,53.3400,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office4_Mult6_Flr_5_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Office4_Mult6_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Office4_Mult6_Flr_5_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 12.1920,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m} 12.1920,48.7680,17.0732, !- X,Y,Z ==> Vertex 2 {m} 9.1440,48.7680,17.0732, !- X,Y,Z ==> Vertex 3 {m} 9.1440,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office4_Mult6_Flr_5_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Office4_Mult6_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Office4_Mult6_Flr_5_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 12.1920,48.7680,21.3415, !- X,Y,Z ==> Vertex 1 {m} 12.1920,48.7680,17.0732, !- X,Y,Z ==> Vertex 2 {m} 12.1920,53.3400,17.0732, !- X,Y,Z ==> Vertex 3 {m} 12.1920,53.3400,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office4_Mult6_Flr_5_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name Office4_Mult6_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Office4_Mult6_Flr_5_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,48.7680,21.3415, !- X,Y,Z ==> Vertex 1 {m} 9.1440,48.7680,17.0732, !- X,Y,Z ==> Vertex 2 {m} 12.1920,48.7680,17.0732, !- X,Y,Z ==> Vertex 3 {m} 12.1920,48.7680,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office4_Mult6_Flr_5_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Office4_Mult6_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Office4_Mult6_Flr_5_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,53.3400,21.3415, !- X,Y,Z ==> Vertex 1 {m} 9.1440,53.3400,17.0732, !- X,Y,Z ==> Vertex 2 {m} 9.1440,48.7680,17.0732, !- X,Y,Z ==> Vertex 3 {m} 9.1440,48.7680,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Office4_Mult6_Flr_5_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Office4_Mult6_Flr_5, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,53.3400,21.3415, !- X,Y,Z ==> Vertex 1 {m} 9.1440,48.7680,21.3415, !- X,Y,Z ==> Vertex 2 {m} 12.1920,48.7680,21.3415, !- X,Y,Z ==> Vertex 3 {m} 12.1920,53.3400,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Flr_5_Wall_1_South, !- Name Wall, !- Surface Type Air_Wall, !- Construction Name Corridor_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_5_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.2400,42.6720,21.3415, !- X,Y,Z ==> Vertex 1 {m} 15.2400,42.6720,17.0732, !- X,Y,Z ==> Vertex 2 {m} 39.6240,42.6720,17.0732, !- X,Y,Z ==> Vertex 3 {m} 39.6240,42.6720,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Flr_5_Wall_1_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition NurseStn_Lobby_Flr_5_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.2400,0.0000,21.3415, !- X,Y,Z ==> Vertex 1 {m} 15.2400,0.0000,17.0732, !- X,Y,Z ==> Vertex 2 {m} 15.2400,42.6720,17.0732, !- X,Y,Z ==> Vertex 3 {m} 15.2400,42.6720,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Flr_5_Wall_1_North, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corridor_Flr_5, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,53.3400,21.3415, !- X,Y,Z ==> Vertex 1 {m} 39.6240,53.3400,17.0732, !- X,Y,Z ==> Vertex 2 {m} 27.4320,53.3400,17.0732, !- X,Y,Z ==> Vertex 3 {m} 27.4320,53.3400,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Flr_5_Wall_2_South, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corridor_Flr_5, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,0.0000,21.3415, !- X,Y,Z ==> Vertex 1 {m} 9.1440,0.0000,17.0732, !- X,Y,Z ==> Vertex 2 {m} 15.2400,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m} 15.2400,0.0000,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Flr_5_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Corridor_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Flr_5_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 8, !- Number of Vertices 9.1440,0.0000,17.0732, !- X,Y,Z ==> Vertex 1 {m} 9.1440,48.7680,17.0732, !- X,Y,Z ==> Vertex 2 {m} 27.4320,48.7680,17.0732, !- X,Y,Z ==> Vertex 3 {m} 27.4320,53.3400,17.0732, !- X,Y,Z ==> Vertex 4 {m} 39.6240,53.3400,17.0732, !- X,Y,Z ==> Vertex 5 {m} 39.6240,42.6720,17.0732, !- X,Y,Z ==> Vertex 6 {m} 15.2400,42.6720,17.0732, !- X,Y,Z ==> Vertex 7 {m} 15.2400,0.0000,17.0732; !- X,Y,Z ==> Vertex 8 {m} BuildingSurface:Detailed, Corridor_Flr_5_Wall_2_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Flr_5_Wall_2_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 27.4320,48.7680,21.3415, !- X,Y,Z ==> Vertex 1 {m} 27.4320,48.7680,17.0732, !- X,Y,Z ==> Vertex 2 {m} 9.1440,48.7680,17.0732, !- X,Y,Z ==> Vertex 3 {m} 9.1440,48.7680,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Flr_5_Wall_2_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Kitchen_Flr_5_Wall_2_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 39.6240,42.6720,21.3415, !- X,Y,Z ==> Vertex 1 {m} 39.6240,42.6720,17.0732, !- X,Y,Z ==> Vertex 2 {m} 39.6240,53.3400,17.0732, !- X,Y,Z ==> Vertex 3 {m} 39.6240,53.3400,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Flr_5_Wall_1_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Flr_5_Wall_1_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 9.1440,48.7680,21.3415, !- X,Y,Z ==> Vertex 1 {m} 9.1440,48.7680,17.0732, !- X,Y,Z ==> Vertex 2 {m} 9.1440,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m} 9.1440,0.0000,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Flr_5_Wall_2_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Flr_5, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Flr_5_Wall_2_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 27.4320,53.3400,21.3415, !- X,Y,Z ==> Vertex 1 {m} 27.4320,53.3400,17.0732, !- X,Y,Z ==> Vertex 2 {m} 27.4320,48.7680,17.0732, !- X,Y,Z ==> Vertex 3 {m} 27.4320,48.7680,21.3415; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Flr_5_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Corridor_Flr_5, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 8, !- Number of Vertices 9.1440,0.0000,21.3415, !- X,Y,Z ==> Vertex 1 {m} 15.2400,0.0000,21.3415, !- X,Y,Z ==> Vertex 2 {m} 15.2400,42.6720,21.3415, !- X,Y,Z ==> Vertex 3 {m} 39.6240,42.6720,21.3415, !- X,Y,Z ==> Vertex 4 {m} 39.6240,53.3400,21.3415, !- X,Y,Z ==> Vertex 5 {m} 27.4320,53.3400,21.3415, !- X,Y,Z ==> Vertex 6 {m} 27.4320,48.7680,21.3415, !- X,Y,Z ==> Vertex 7 {m} 9.1440,48.7680,21.3415; !- X,Y,Z ==> Vertex 8 {m} !- =========== ALL OBJECTS IN CLASS: SURFACE:HEATTRANSFER:SUB =========== FenestrationSurface:Detailed, Office1_Mult4_Flr_1_Wall_South_Window, !- Name Window, !- Surface Type NonreseastWindow_U_0.34_SHGC_0.38, !- Construction Name Office1_Mult4_Flr_1_Wall_South, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 6.405,0.0000,2.1340, !- X,Y,Z ==> Vertex 1 {m} 6.405,0.0000,0.9140, !- X,Y,Z ==> Vertex 2 {m} 8.835,0.0000,0.9140, !- X,Y,Z ==> Vertex 3 {m} 8.835,0.0000,2.1340; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Lobby_Records_Flr_1_Wall_2_West, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name Lobby_Records_Flr_1_Wall_1_West, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,52.3400,2.1340, !- X,Y,Z ==> Vertex 1 {m} 0.000,52.3400,0.9140, !- X,Y,Z ==> Vertex 2 {m} 0.000,1.0000,0.9140, !- X,Y,Z ==> Vertex 3 {m} 0.000,1.0000,2.1340; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, ER_NurseStn_Lobby_Flr_1_Wall_1_East_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name ER_NurseStn_Lobby_Flr_1_Wall_1_East, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 70.104,14.2020,2.1340, !- X,Y,Z ==> Vertex 1 {m} 70.104,14.2020,0.9140, !- X,Y,Z ==> Vertex 2 {m} 70.104,39.1380,0.9140, !- X,Y,Z ==> Vertex 3 {m} 70.104,39.1380,2.1340; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, IC_PatRoom1_Mult5_Flr_2_Wall_North_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name IC_PatRoom1_Mult5_Flr_2_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 28.682,53.3400,6.4010, !- X,Y,Z ==> Vertex 1 {m} 28.682,53.3400,5.1820, !- X,Y,Z ==> Vertex 2 {m} 24.658,53.3400,5.1820, !- X,Y,Z ==> Vertex 3 {m} 24.658,53.3400,6.4010; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, IC_PatRoom2_Flr_2_Wall_North_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name IC_PatRoom2_Flr_2_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 5.730,53.3400,6.4010, !- X,Y,Z ==> Vertex 1 {m} 5.730,53.3400,5.1820, !- X,Y,Z ==> Vertex 2 {m} 0.366,53.3400,5.1820, !- X,Y,Z ==> Vertex 3 {m} 0.366,53.3400,6.4010; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, IC_PatRoom2_Flr_2_Wall_West_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name IC_PatRoom2_Flr_2_Wall_West, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,53.0660,6.4010, !- X,Y,Z ==> Vertex 1 {m} 0.000,53.0660,5.1820, !- X,Y,Z ==> Vertex 2 {m} 0.000,49.0420,5.1820, !- X,Y,Z ==> Vertex 3 {m} 0.000,49.0420,6.4010; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, IC_PatRoom3_Mult6_Flr_2_Wall_West_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name IC_PatRoom3_Mult6_Flr_2_Wall_West, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,48.4940,6.4010, !- X,Y,Z ==> Vertex 1 {m} 0.000,48.4940,5.1820, !- X,Y,Z ==> Vertex 2 {m} 0.000,44.4700,5.1820, !- X,Y,Z ==> Vertex 3 {m} 0.000,44.4700,6.4010; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, ICU_Flr_2_Wall_West_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name ICU_Flr_2_Wall_West, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,20.9360,6.4010, !- X,Y,Z ==> Vertex 1 {m} 0.000,20.9360,5.1820, !- X,Y,Z ==> Vertex 2 {m} 0.000,0.4000,5.1820, !- X,Y,Z ==> Vertex 3 {m} 0.000,0.4000,6.4010; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, OR_NurseStn_Lobby_Flr_2_Wall_South_Window, !- Name Window, !- Surface Type NonreseastWindow_U_0.34_SHGC_0.38, !- Construction Name OR_NurseStn_Lobby_Flr_2_Wall_South, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 40.195,0.0000,6.4010, !- X,Y,Z ==> Vertex 1 {m} 40.195,0.0000,5.1820, !- X,Y,Z ==> Vertex 2 {m} 69.533,0.0000,5.1820, !- X,Y,Z ==> Vertex 3 {m} 69.533,0.0000,6.4010; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, PatRoom1_Mult10_Flr_3_Wall_South_Window, !- Name Window, !- Surface Type NonreseastWindow_U_0.34_SHGC_0.38, !- Construction Name PatRoom1_Mult10_Flr_3_Wall_South, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 39.898,0.0000,10.6680, !- X,Y,Z ==> Vertex 1 {m} 39.898,0.0000,9.4490, !- X,Y,Z ==> Vertex 2 {m} 43.922,0.0000,9.4490, !- X,Y,Z ==> Vertex 3 {m} 43.922,0.0000,10.6680; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, PatRoom2_Flr_3_Wall_East_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name PatRoom2_Flr_3_Wall_East,!- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 70.104,0.2740,10.6680, !- X,Y,Z ==> Vertex 1 {m} 70.104,0.2740,9.4490, !- X,Y,Z ==> Vertex 2 {m} 70.104,4.2980,9.4490, !- X,Y,Z ==> Vertex 3 {m} 70.104,4.2980,10.6680; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, PatRoom2_Flr_3_Wall_South_Window, !- Name Window, !- Surface Type NonreseastWindow_U_0.34_SHGC_0.38, !- Construction Name PatRoom2_Flr_3_Wall_South, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 62.941,0.0000,10.6680, !- X,Y,Z ==> Vertex 1 {m} 62.941,0.0000,9.4490, !- X,Y,Z ==> Vertex 2 {m} 69.647,0.0000,9.4490, !- X,Y,Z ==> Vertex 3 {m} 69.647,0.0000,10.6680; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, PatRoom3_Mult10_Flr_3_Wall_East_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name PatRoom3_Mult10_Flr_3_Wall_East, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 70.104,4.8370,10.6680, !- X,Y,Z ==> Vertex 1 {m} 70.104,4.8370,9.4490, !- X,Y,Z ==> Vertex 2 {m} 70.104,8.7260,9.4490, !- X,Y,Z ==> Vertex 3 {m} 70.104,8.7260,10.6680; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, PatRoom4_Flr_3_Wall_North_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name PatRoom4_Flr_3_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 69.647,53.3400,10.6680, !- X,Y,Z ==> Vertex 1 {m} 69.647,53.3400,9.4490, !- X,Y,Z ==> Vertex 2 {m} 62.941,53.3400,9.4490, !- X,Y,Z ==> Vertex 3 {m} 62.941,53.3400,10.6680; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, PatRoom4_Flr_3_Wall_East_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name PatRoom4_Flr_3_Wall_East,!- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 70.104,49.0420,10.6680, !- X,Y,Z ==> Vertex 1 {m} 70.104,49.0420,9.4490, !- X,Y,Z ==> Vertex 2 {m} 70.104,53.0660,9.4490, !- X,Y,Z ==> Vertex 3 {m} 70.104,53.0660,10.6680; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, PatRoom5_Mult10_Flr_3_Wall_North_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name PatRoom5_Mult10_Flr_3_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 43.922,53.3400,10.6680, !- X,Y,Z ==> Vertex 1 {m} 43.922,53.3400,9.4490, !- X,Y,Z ==> Vertex 2 {m} 39.898,53.3400,9.4490, !- X,Y,Z ==> Vertex 3 {m} 39.898,53.3400,10.6680; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, PatRoom6_Flr_3_Wall_South_Window, !- Name Window, !- Surface Type NonreseastWindow_U_0.34_SHGC_0.38, !- Construction Name PatRoom6_Flr_3_Wall_South, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.366,0.0000,10.6680, !- X,Y,Z ==> Vertex 1 {m} 0.366,0.0000,9.4490, !- X,Y,Z ==> Vertex 2 {m} 5.730,0.0000,9.4490, !- X,Y,Z ==> Vertex 3 {m} 5.730,0.0000,10.6680; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, PatRoom6_Flr_3_Wall_West_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name PatRoom6_Flr_3_Wall_West,!- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,4.2980,10.6680, !- X,Y,Z ==> Vertex 1 {m} 0.000,4.2980,9.4490, !- X,Y,Z ==> Vertex 2 {m} 0.000,0.2740,9.4490, !- X,Y,Z ==> Vertex 3 {m} 0.000,0.2740,10.6680; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, PatRoom7_Mult10_Flr_3_Wall_West_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name PatRoom7_Mult10_Flr_3_Wall_West, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,8.7260,10.6680, !- X,Y,Z ==> Vertex 1 {m} 0.000,8.7260,9.4490, !- X,Y,Z ==> Vertex 2 {m} 0.000,4.8370,9.4490, !- X,Y,Z ==> Vertex 3 {m} 0.000,4.8370,10.6680; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, PatRoom8_Flr_3_Wall_North_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name PatRoom8_Flr_3_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 5.730,53.3400,10.6680, !- X,Y,Z ==> Vertex 1 {m} 5.730,53.3400,9.4490, !- X,Y,Z ==> Vertex 2 {m} 0.366,53.3400,9.4490, !- X,Y,Z ==> Vertex 3 {m} 0.366,53.3400,10.6680; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, PatRoom8_Flr_3_Wall_West_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name PatRoom8_Flr_3_Wall_West,!- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,53.0660,10.6680, !- X,Y,Z ==> Vertex 1 {m} 0.000,53.0660,9.4490, !- X,Y,Z ==> Vertex 2 {m} 0.000,49.0420,9.4490, !- X,Y,Z ==> Vertex 3 {m} 0.000,49.0420,10.6680; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, PatRoom1_Mult10_Flr_4_Wall_South_Window, !- Name Window, !- Surface Type NonreseastWindow_U_0.34_SHGC_0.38, !- Construction Name PatRoom1_Mult10_Flr_4_Wall_South, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 39.898,0.0000,14.9350, !- X,Y,Z ==> Vertex 1 {m} 39.898,0.0000,13.7160, !- X,Y,Z ==> Vertex 2 {m} 43.922,0.0000,13.7160, !- X,Y,Z ==> Vertex 3 {m} 43.922,0.0000,14.9350; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, PatRoom2_Flr_4_Wall_East_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name PatRoom2_Flr_4_Wall_East,!- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 70.104,0.2740,14.9350, !- X,Y,Z ==> Vertex 1 {m} 70.104,0.2740,13.7160, !- X,Y,Z ==> Vertex 2 {m} 70.104,4.2980,13.7160, !- X,Y,Z ==> Vertex 3 {m} 70.104,4.2980,14.9350; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, PatRoom2_Flr_4_Wall_South_Window, !- Name Window, !- Surface Type NonreseastWindow_U_0.34_SHGC_0.38, !- Construction Name PatRoom2_Flr_4_Wall_South, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 62.941,0.0000,14.9350, !- X,Y,Z ==> Vertex 1 {m} 62.941,0.0000,13.7160, !- X,Y,Z ==> Vertex 2 {m} 69.647,0.0000,13.7160, !- X,Y,Z ==> Vertex 3 {m} 69.647,0.0000,14.9350; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, PatRoom3_Mult10_Flr_4_Wall_East_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name PatRoom3_Mult10_Flr_4_Wall_East, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 70.104,4.8370,14.9350, !- X,Y,Z ==> Vertex 1 {m} 70.104,4.8370,13.7160, !- X,Y,Z ==> Vertex 2 {m} 70.104,8.7260,13.7160, !- X,Y,Z ==> Vertex 3 {m} 70.104,8.7260,14.9350; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, PatRoom4_Flr_4_Wall_North_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name PatRoom4_Flr_4_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 69.647,53.3400,14.9350, !- X,Y,Z ==> Vertex 1 {m} 69.647,53.3400,13.7160, !- X,Y,Z ==> Vertex 2 {m} 62.941,53.3400,13.7160, !- X,Y,Z ==> Vertex 3 {m} 62.941,53.3400,14.9350; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, PatRoom4_Flr_4_Wall_East_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name PatRoom4_Flr_4_Wall_East,!- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 70.104,49.0420,14.9350, !- X,Y,Z ==> Vertex 1 {m} 70.104,49.0420,13.7160, !- X,Y,Z ==> Vertex 2 {m} 70.104,53.0660,13.7160, !- X,Y,Z ==> Vertex 3 {m} 70.104,53.0660,14.9350; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, PatRoom5_Mult10_Flr_4_Wall_North_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name PatRoom5_Mult10_Flr_4_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 43.922,53.3400,14.9350, !- X,Y,Z ==> Vertex 1 {m} 43.922,53.3400,13.7160, !- X,Y,Z ==> Vertex 2 {m} 39.898,53.3400,13.7160, !- X,Y,Z ==> Vertex 3 {m} 39.898,53.3400,14.9350; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, PatRoom6_Flr_4_Wall_South_Window, !- Name Window, !- Surface Type NonreseastWindow_U_0.34_SHGC_0.38, !- Construction Name PatRoom6_Flr_4_Wall_South, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.366,0.0000,14.9350, !- X,Y,Z ==> Vertex 1 {m} 0.366,0.0000,13.7160, !- X,Y,Z ==> Vertex 2 {m} 5.730,0.0000,13.7160, !- X,Y,Z ==> Vertex 3 {m} 5.730,0.0000,14.9350; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, PatRoom6_Flr_4_Wall_West_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name PatRoom6_Flr_4_Wall_West,!- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,4.2980,14.9350, !- X,Y,Z ==> Vertex 1 {m} 0.000,4.2980,13.7160, !- X,Y,Z ==> Vertex 2 {m} 0.000,0.2740,13.7160, !- X,Y,Z ==> Vertex 3 {m} 0.000,0.2740,14.9350; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, PatRoom7_Mult10_Flr_4_Wall_West_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name PatRoom7_Mult10_Flr_4_Wall_West, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,8.7260,14.9350, !- X,Y,Z ==> Vertex 1 {m} 0.000,8.7260,13.7160, !- X,Y,Z ==> Vertex 2 {m} 0.000,4.8370,13.7160, !- X,Y,Z ==> Vertex 3 {m} 0.000,4.8370,14.9350; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, PatRoom8_Flr_4_Wall_North_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name PatRoom8_Flr_4_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 5.730,53.3400,14.9350, !- X,Y,Z ==> Vertex 1 {m} 5.730,53.3400,13.7160, !- X,Y,Z ==> Vertex 2 {m} 0.366,53.3400,13.7160, !- X,Y,Z ==> Vertex 3 {m} 0.366,53.3400,14.9350; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, PatRoom8_Flr_4_Wall_West_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name PatRoom8_Flr_4_Wall_West,!- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,53.0660,14.9350, !- X,Y,Z ==> Vertex 1 {m} 0.000,53.0660,13.7160, !- X,Y,Z ==> Vertex 2 {m} 0.000,49.0420,13.7160, !- X,Y,Z ==> Vertex 3 {m} 0.000,49.0420,14.9350; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Dining_Flr_5_Wall_South_Window, !- Name Window, !- Surface Type NonreseastWindow_U_0.34_SHGC_0.38, !- Construction Name Dining_Flr_5_Wall_South, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 40.195,0.0000,19.2020, !- X,Y,Z ==> Vertex 1 {m} 40.195,0.0000,17.9830, !- X,Y,Z ==> Vertex 2 {m} 69.533,0.0000,17.9830, !- X,Y,Z ==> Vertex 3 {m} 69.533,0.0000,19.2020; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Office1_Flr_5_Wall_South_Window, !- Name Window, !- Surface Type NonreseastWindow_U_0.34_SHGC_0.38, !- Construction Name Office1_Flr_5_Wall_South,!- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.549,0.0000,19.2020, !- X,Y,Z ==> Vertex 1 {m} 0.549,0.0000,17.9830, !- X,Y,Z ==> Vertex 2 {m} 8.595,0.0000,17.9830, !- X,Y,Z ==> Vertex 3 {m} 8.595,0.0000,19.2020; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Office1_Flr_5_Wall_West_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name Office1_Flr_5_Wall_West, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,7.1630,19.2020, !- X,Y,Z ==> Vertex 1 {m} 0.000,7.1630,17.9830, !- X,Y,Z ==> Vertex 2 {m} 0.000,0.4570,17.9830, !- X,Y,Z ==> Vertex 3 {m} 0.000,0.4570,19.2020; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Office2_Mult5_Flr_5_Wall_West_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name Office2_Mult5_Flr_5_Wall_West, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,14.7830,19.2020, !- X,Y,Z ==> Vertex 1 {m} 0.000,14.7830,17.9830, !- X,Y,Z ==> Vertex 2 {m} 0.000,8.0770,17.9830, !- X,Y,Z ==> Vertex 3 {m} 0.000,8.0770,19.2020; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Office3_Flr_5_Wall_North_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name Office3_Flr_5_Wall_North,!- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 8.595,53.3400,19.2020, !- X,Y,Z ==> Vertex 1 {m} 8.595,53.3400,17.9830, !- X,Y,Z ==> Vertex 2 {m} 0.549,53.3400,17.9830, !- X,Y,Z ==> Vertex 3 {m} 0.549,53.3400,19.2020; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Office3_Flr_5_Wall_West_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name Office3_Flr_5_Wall_West, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,52.8830,19.2020, !- X,Y,Z ==> Vertex 1 {m} 0.000,52.8830,17.9830, !- X,Y,Z ==> Vertex 2 {m} 0.000,46.1770,17.9830, !- X,Y,Z ==> Vertex 3 {m} 0.000,46.1770,19.2020; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Office4_Mult6_Flr_5_Wall_North_Window, !- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name Office4_Mult6_Flr_5_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 11.883,53.3400,19.2020, !- X,Y,Z ==> Vertex 1 {m} 11.883,53.3400,17.9830, !- X,Y,Z ==> Vertex 2 {m} 9.453,53.3400,17.9830, !- X,Y,Z ==> Vertex 3 {m} 9.453,53.3400,19.2020; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, ER_Exam3_Mult4_Flr_1_Wall_East_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name ER_Exam3_Mult4_Flr_1_Wall_East, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 70.104000000000,7.359108108820,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 70.104000000000,7.359108108820,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 70.104000000000,8.273508108820,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 70.104000000000,8.273508108820,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, ER_Trauma1_Flr_1_Wall_East_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name ER_Trauma1_Flr_1_Wall_East, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 70.104000000000,2.758813671662,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 70.104000000000,2.758813671662,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 70.104000000000,3.673213671662,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 70.104000000000,3.673213671662,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corridor_Flr_1_Wall_South_Door2, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Corridor_Flr_1_Wall_South, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 35.953443675091,0.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 35.953443675091,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 36.867843675091,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 36.867843675091,0.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corridor_Flr_1_Wall_North_Door2, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Corridor_Flr_1_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 31.965236137530,53.340000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 31.965236137530,53.340000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 31.050836137530,53.340000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 31.050836137530,53.340000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Lobby_Records_Flr_1_Wall_1_South_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Lobby_Records_Flr_1_Wall_1_South, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 3.585870154051,0.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 3.585870154051,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 4.500270154051,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 4.500270154051,0.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Lobby_Records_Flr_1_Wall_2_South_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Lobby_Records_Flr_1_Wall_2_South, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 27.053267114353,0.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 27.053267114353,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 27.967667114353,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 27.967667114353,0.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Lobby_Records_Flr_1_Wall_North_Door1, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Lobby_Records_Flr_1_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 26.374663905857,53.340000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 26.374663905857,53.340000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 25.460263905857,53.340000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 25.460263905857,53.340000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Lobby_Records_Flr_1_Wall_North_Door3, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Lobby_Records_Flr_1_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 3.754282444979,53.340000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 3.754282444979,53.340000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 2.839882444979,53.340000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 2.839882444979,53.340000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, ER_Exam1_Mult4_Flr_1_Wall_South_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name ER_Exam1_Mult4_Flr_1_Wall_South, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 42.288205250969,0.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 42.288205250969,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 43.202605250969,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 43.202605250969,0.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, ER_Trauma1_Flr_1_Wall_South_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name ER_Trauma1_Flr_1_Wall_South, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 65.379246485980,0.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 65.379246485980,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 66.293646485980,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 66.293646485980,0.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, ER_Trauma2_Flr_1_Wall_East_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name ER_Trauma2_Flr_1_Wall_East, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 70.104000000000,49.786049019517,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 70.104000000000,49.786049019517,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 70.104000000000,50.700449019517,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 70.104000000000,50.700449019517,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, ER_Trauma2_Flr_1_Wall_North_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name ER_Trauma2_Flr_1_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 66.434946561573,53.340000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 66.434946561573,53.340000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 65.520546561573,53.340000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 65.520546561573,53.340000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, ER_Triage_Mult4_Flr_1_Wall_North_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name ER_Triage_Mult4_Flr_1_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 44.446456441754,53.340000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 44.446456441754,53.340000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 43.532056441754,53.340000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 43.532056441754,53.340000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corridor_Flr_1_Wall_South_Door1, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Corridor_Flr_1_Wall_South, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 31.496618875192,0.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 31.496618875192,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 32.411018875192,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 32.411018875192,0.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corridor_Flr_1_Wall_North_Door1, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Corridor_Flr_1_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 37.530463591957,53.340000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 37.530463591957,53.340000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 36.616063591957,53.340000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 36.616063591957,53.340000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Lobby_Records_Flr_1_Wall_North_Door2, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Lobby_Records_Flr_1_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 16.509001079618,53.340000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 16.509001079618,53.340000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 15.594601079618,53.340000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 15.594601079618,53.340000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Lobby_Records_Flr_1_Wall_2_South_RollDoor, !- Name Door, !- Surface Type Overhead Door_con, !- Construction Name Lobby_Records_Flr_1_Wall_2_South, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 22.483082864735,0.000000000000,2.438400000000, !- X,Y,Z ==> Vertex 1 {m} 22.483082864735,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 25.531082864734,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 25.531082864734,0.000000000000,2.438400000000; !- X,Y,Z ==> Vertex 4 {m} !- =========== ALL OBJECTS IN CLASS: SURFACE:HEATTRANSFER:INTERNALMASS =========== InternalMass, Basement_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Basement, !- Zone Name 7478.6947; !- Surface Area {m2} InternalMass, ER_Exam1_Mult4_Flr_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name ER_Exam1_Mult4_Flr_1, !- Zone Name 55.7418; !- Surface Area {m2} InternalMass, ER_Trauma1_Flr_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name ER_Trauma1_Flr_1, !- Zone Name 55.7418; !- Surface Area {m2} InternalMass, ER_Exam3_Mult4_Flr_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name ER_Exam3_Mult4_Flr_1, !- Zone Name 55.7418; !- Surface Area {m2} InternalMass, ER_Trauma2_Flr_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name ER_Trauma2_Flr_1, !- Zone Name 55.7418; !- Surface Area {m2} InternalMass, ER_Triage_Mult4_Flr_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name ER_Triage_Mult4_Flr_1, !- Zone Name 55.7418; !- Surface Area {m2} InternalMass, Office1_Mult4_Flr_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Office1_Mult4_Flr_1, !- Zone Name 27.8709; !- Surface Area {m2} InternalMass, Lobby_Records_Flr_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Lobby_Records_Flr_1, !- Zone Name 2949.6212; !- Surface Area {m2} InternalMass, Corridor_Flr_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corridor_Flr_1, !- Zone Name 1138.0622; !- Surface Area {m2} InternalMass, ER_NurseStn_Lobby_Flr_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name ER_NurseStn_Lobby_Flr_1, !- Zone Name 2471.2209; !- Surface Area {m2} InternalMass, OR1_Flr_2_InternalMass_1,!- Name InteriorFurnishings, !- Construction Name OR1_Flr_2, !- Zone Name 111.4836; !- Surface Area {m2} InternalMass, OR2_Mult5_Flr_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name OR2_Mult5_Flr_2, !- Zone Name 111.4836; !- Surface Area {m2} InternalMass, OR3_Flr_2_InternalMass_1,!- Name InteriorFurnishings, !- Construction Name OR3_Flr_2, !- Zone Name 111.4836; !- Surface Area {m2} InternalMass, OR4_Flr_2_InternalMass_1,!- Name InteriorFurnishings, !- Construction Name OR4_Flr_2, !- Zone Name 445.9346; !- Surface Area {m2} InternalMass, IC_PatRoom1_Mult5_Flr_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name IC_PatRoom1_Mult5_Flr_2, !- Zone Name 41.8064; !- Surface Area {m2} InternalMass, IC_PatRoom2_Flr_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name IC_PatRoom2_Flr_2, !- Zone Name 55.7418; !- Surface Area {m2} InternalMass, IC_PatRoom3_Mult6_Flr_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name IC_PatRoom3_Mult6_Flr_2, !- Zone Name 41.8064; !- Surface Area {m2} InternalMass, ICU_Flr_2_InternalMass_1,!- Name InteriorFurnishings, !- Construction Name ICU_Flr_2, !- Zone Name 1235.9289; !- Surface Area {m2} InternalMass, ICU_NurseStn_Lobby_Flr_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name ICU_NurseStn_Lobby_Flr_2,!- Zone Name 1337.5356; !- Surface Area {m2} InternalMass, Corridor_Flr_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corridor_Flr_2, !- Zone Name 1138.0622; !- Surface Area {m2} InternalMass, OR_NurseStn_Lobby_Flr_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name OR_NurseStn_Lobby_Flr_2, !- Zone Name 2025.2863; !- Surface Area {m2} InternalMass, PatRoom1_Mult10_Flr_3_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name PatRoom1_Mult10_Flr_3, !- Zone Name 41.8064; !- Surface Area {m2} InternalMass, PatRoom2_Flr_3_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name PatRoom2_Flr_3, !- Zone Name 69.6773; !- Surface Area {m2} InternalMass, PatRoom3_Mult10_Flr_3_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name PatRoom3_Mult10_Flr_3, !- Zone Name 40.4165; !- Surface Area {m2} InternalMass, PatRoom4_Flr_3_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name PatRoom4_Flr_3, !- Zone Name 69.6773; !- Surface Area {m2} InternalMass, PatRoom5_Mult10_Flr_3_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name PatRoom5_Mult10_Flr_3, !- Zone Name 41.8064; !- Surface Area {m2} InternalMass, PhysTherapy_Flr_3_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name PhysTherapy_Flr_3, !- Zone Name 975.4819; !- Surface Area {m2} InternalMass, PatRoom6_Flr_3_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name PatRoom6_Flr_3, !- Zone Name 55.7418; !- Surface Area {m2} InternalMass, PatRoom7_Mult10_Flr_3_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name PatRoom7_Mult10_Flr_3, !- Zone Name 40.4165; !- Surface Area {m2} InternalMass, PatRoom8_Flr_3_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name PatRoom8_Flr_3, !- Zone Name 55.7418; !- Surface Area {m2} InternalMass, NurseStn_Lobby_Flr_3_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name NurseStn_Lobby_Flr_3, !- Zone Name 1811.6093; !- Surface Area {m2} InternalMass, Lab_Flr_3_InternalMass_1,!- Name InteriorFurnishings, !- Construction Name Lab_Flr_3, !- Zone Name 529.5473; !- Surface Area {m2} InternalMass, Corridor_SE_Flr_3_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corridor_SE_Flr_3, !- Zone Name 1133.4171; !- Surface Area {m2} InternalMass, Corridor_NW_Flr_3_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corridor_NW_Flr_3, !- Zone Name 1133.4171; !- Surface Area {m2} InternalMass, PatRoom1_Mult10_Flr_4_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name PatRoom1_Mult10_Flr_4, !- Zone Name 41.8064; !- Surface Area {m2} InternalMass, PatRoom2_Flr_4_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name PatRoom2_Flr_4, !- Zone Name 69.6773; !- Surface Area {m2} InternalMass, PatRoom3_Mult10_Flr_4_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name PatRoom3_Mult10_Flr_4, !- Zone Name 40.4165; !- Surface Area {m2} InternalMass, PatRoom4_Flr_4_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name PatRoom4_Flr_4, !- Zone Name 69.6773; !- Surface Area {m2} InternalMass, PatRoom5_Mult10_Flr_4_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name PatRoom5_Mult10_Flr_4, !- Zone Name 41.8064; !- Surface Area {m2} InternalMass, Radiology_Flr_4_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Radiology_Flr_4, !- Zone Name 975.4819; !- Surface Area {m2} InternalMass, PatRoom6_Flr_4_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name PatRoom6_Flr_4, !- Zone Name 55.7418; !- Surface Area {m2} InternalMass, PatRoom7_Mult10_Flr_4_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name PatRoom7_Mult10_Flr_4, !- Zone Name 40.4165; !- Surface Area {m2} InternalMass, PatRoom8_Flr_4_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name PatRoom8_Flr_4, !- Zone Name 55.7418; !- Surface Area {m2} InternalMass, NurseStn_Lobby_Flr_4_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name NurseStn_Lobby_Flr_4, !- Zone Name 1811.6093; !- Surface Area {m2} InternalMass, Lab_Flr_4_InternalMass_1,!- Name InteriorFurnishings, !- Construction Name Lab_Flr_4, !- Zone Name 529.5473; !- Surface Area {m2} InternalMass, Corridor_SE_Flr_4_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corridor_SE_Flr_4, !- Zone Name 1133.4171; !- Surface Area {m2} InternalMass, Corridor_NW_Flr_4_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corridor_NW_Flr_4, !- Zone Name 1133.4171; !- Surface Area {m2} InternalMass, Dining_Flr_5_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Dining_Flr_5, !- Zone Name 1393.5456; !- Surface Area {m2} InternalMass, NurseStn_Lobby_Flr_5_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name NurseStn_Lobby_Flr_5, !- Zone Name 2081.0281; !- Surface Area {m2} InternalMass, Kitchen_Flr_5_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Kitchen_Flr_5, !- Zone Name 1858.0608; !- Surface Area {m2} InternalMass, Office1_Flr_5_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Office1_Flr_5, !- Zone Name 139.3911; !- Surface Area {m2} InternalMass, Office2_Mult5_Flr_5_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Office2_Mult5_Flr_5, !- Zone Name 139.3546; !- Surface Area {m2} InternalMass, Office3_Flr_5_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Office3_Flr_5, !- Zone Name 139.3546; !- Surface Area {m2} InternalMass, Office4_Mult6_Flr_5_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Office4_Mult6_Flr_5, !- Zone Name 27.8709; !- Surface Area {m2} InternalMass, Corridor_Flr_5_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corridor_Flr_5, !- Zone Name 1003.3528; !- Surface Area {m2} !- =========== ALL OBJECTS IN CLASS: SCHEDULETYPE =========== ScheduleTypeLimits, Any Number; !- Name ScheduleTypeLimits, Fraction, !- Name 0.0, !- Lower Limit Value 1.0, !- Upper Limit Value Continuous; !- Numeric Type ScheduleTypeLimits, Temperature, !- Name -60, !- Lower Limit Value 200, !- Upper Limit Value Continuous; !- Numeric Type ScheduleTypeLimits, On/Off, !- Name 0, !- Lower Limit Value 1, !- Upper Limit Value Discrete; !- Numeric Type ScheduleTypeLimits, Control Type, !- Name 0, !- Lower Limit Value 4, !- Upper Limit Value Discrete; !- Numeric Type ScheduleTypeLimits, Humidity, !- Name 10, !- Lower Limit Value 90, !- Upper Limit Value Continuous; !- Numeric Type ScheduleTypeLimits, Number; !- Name !- =========== ALL OBJECTS IN CLASS: SCHEDULE:COMPACT =========== Schedule:Compact, Patrms_ExtraElecHeatC_Sch, !- Name On/Off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1; !- Field 3 Schedule:Compact, Patrms_ExtraWaterHeatC_Sch, !- Name On/Off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1; !- Field 3 Schedule:Compact, ER_ExtraElecHeatC_Sch, !- Name On/Off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1; !- Field 3 Schedule:Compact, ER_ExtraWaterHeatC_Sch, !- Name On/Off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1; !- Field 3 Schedule:Compact, OR_ExtraElecHeatC_Sch, !- Name On/Off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1; !- Field 3 Schedule:Compact, OR_ExtraWaterHeatC_Sch, !- Name On/Off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1; !- Field 3 Schedule:Compact, ICU_ExtraElecHeatC_Sch, !- Name On/Off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1; !- Field 3 Schedule:Compact, ICU_ExtraWaterHeatC_Sch, !- Name On/Off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1; !- Field 3 Schedule:Compact, Labs_ExtraElecHeatC_Sch, !- Name On/Off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1; !- Field 3 Schedule:Compact, Labs_ExtraWaterHeatC_Sch,!- Name On/Off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1; !- Field 3 Schedule:Compact, Hours_of_operation, !- Name on/off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1.0; !- Field 3 Schedule:Compact, Exterior_Lgt_ALWAYS_ON, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1; !- Field 3 Schedule:Compact, ALWAYS_ON, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1.0; !- Field 3 Schedule:Compact, ALWAYS_OFF, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.0; !- Field 3 Schedule:Compact, HVACOperationSchd, !- Name on/off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1.0; !- Field 3 Schedule:Compact, BLDG_LIGHT_CORRIDOR_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 8:00,0.4806, !- Field 3 Until: 16:00,0.86508, !- Field 4 Until: 24:00,0.4806, !- Field 5 For: SummerDesignDay, !- Field 6 Until: 24:00,1, !- Field 7 For: WinterDesignDay, !- Field 8 Until: 24:00,0, !- Field 9 For: Saturday, !- Field 10 Until: 8:00,0.4806, !- Field 11 Until: 18:00,0.76896, !- Field 12 Until: 24:00,0.4806, !- Field 13 For: Sunday Holidays AllOtherDays, !- Field 14 Until: 8:00,0.4806, !- Field 15 Until: 16:00,0.67284, !- Field 16 Until: 24:00,0.4806; !- Field 17 Schedule:Compact, BLDG_LIGHT_EXAM_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 8:00,0.39, !- Field 3 Until: 16:00,0.702, !- Field 4 Until: 24:00,0.39, !- Field 5 For: SummerDesignDay, !- Field 6 Until: 24:00,1, !- Field 7 For: WinterDesignDay, !- Field 8 Until: 24:00,0, !- Field 9 For: Saturday, !- Field 10 Until: 8:00,0.39, !- Field 11 Until: 18:00,0.624, !- Field 12 Until: 24:00,0.39, !- Field 13 For: Sunday Holidays AllOtherDays, !- Field 14 Until: 8:00,0.39, !- Field 15 Until: 16:00,0.546, !- Field 16 Until: 24:00,0.39; !- Field 17 Schedule:Compact, BLDG_LIGHT_EXTD_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 8:00,0.5, !- Field 3 Until: 16:00,0.9, !- Field 4 Until: 24:00,0.5, !- Field 5 For: SummerDesignDay, !- Field 6 Until: 24:00,1, !- Field 7 For: WinterDesignDay, !- Field 8 Until: 24:00,0, !- Field 9 For: Saturday, !- Field 10 Until: 8:00,0.5, !- Field 11 Until: 18:00,0.8, !- Field 12 Until: 24:00,0.5, !- Field 13 For: Sunday Holidays AllOtherDays, !- Field 14 Until: 8:00,0.5, !- Field 15 Until: 16:00,0.7, !- Field 16 Until: 24:00,0.5; !- Field 17 Schedule:Compact, BLDG_LIGHT_LOBBYFLR1_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 7:00,0.1, !- Field 3 Until: 8:00,0.4775, !- Field 4 Until: 16:00,0.8595, !- Field 5 Until: 22:00,0.2865, !- Field 6 Until: 23:00,0.3, !- Field 7 Until: 24:00,0.1, !- Field 8 For: SummerDesignDay, !- Field 9 Until: 24:00,1, !- Field 10 For: WinterDesignDay, !- Field 11 Until: 24:00,0, !- Field 12 For: Saturday, !- Field 13 Until: 7:00,0.1, !- Field 14 Until: 8:00,0.191, !- Field 15 Until: 18:00,0.382, !- Field 16 Until: 19:00,0.0955, !- Field 17 Until: 24:00,0.1, !- Field 18 For: Sunday Holidays AllOtherDays, !- Field 19 Until: 8:00,0.05, !- Field 20 Until: 16:00,0.0955, !- Field 21 Until: 24:00,0.05; !- Field 22 Schedule:Compact, BLDG_LIGHT_LOBBYFLR5_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 7:00,0.1, !- Field 3 Until: 8:00,0.485, !- Field 4 Until: 16:00,0.873, !- Field 5 Until: 22:00,0.291, !- Field 6 Until: 23:00,0.3, !- Field 7 Until: 24:00,0.1, !- Field 8 For: SummerDesignDay, !- Field 9 Until: 24:00,1, !- Field 10 For: WinterDesignDay, !- Field 11 Until: 24:00,0, !- Field 12 For: Saturday, !- Field 13 Until: 7:00,0.1, !- Field 14 Until: 8:00,0.194, !- Field 15 Until: 18:00,0.388, !- Field 16 Until: 19:00,0.097, !- Field 17 Until: 24:00,0.1, !- Field 18 For: Sunday Holidays AllOtherDays, !- Field 19 Until: 8:00,0.05, !- Field 20 Until: 16:00,0.097, !- Field 21 Until: 24:00,0.05; !- Field 22 Schedule:Compact, BLDG_LIGHT_NURSEFLR1_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 8:00,0.49, !- Field 3 Until: 16:00,0.882, !- Field 4 Until: 24:00,0.49, !- Field 5 For: SummerDesignDay, !- Field 6 Until: 24:00,1, !- Field 7 For: WinterDesignDay, !- Field 8 Until: 24:00,0, !- Field 9 For: Saturday, !- Field 10 Until: 8:00,0.49, !- Field 11 Until: 18:00,0.784, !- Field 12 Until: 24:00,0.49, !- Field 13 For: Sunday Holidays AllOtherDays, !- Field 14 Until: 8:00,0.49, !- Field 15 Until: 16:00,0.686, !- Field 16 Until: 24:00,0.49; !- Field 17 Schedule:Compact, BLDG_LIGHT_NURSEFLR234_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 8:00,0.485, !- Field 3 Until: 16:00,0.873, !- Field 4 Until: 24:00,0.485, !- Field 5 For: SummerDesignDay, !- Field 6 Until: 24:00,1, !- Field 7 For: WinterDesignDay, !- Field 8 Until: 24:00,0, !- Field 9 For: Saturday, !- Field 10 Until: 8:00,0.485, !- Field 11 Until: 18:00,0.776, !- Field 12 Until: 24:00,0.485, !- Field 13 For: Sunday Holidays AllOtherDays, !- Field 14 Until: 8:00,0.485, !- Field 15 Until: 16:00,0.679, !- Field 16 Until: 24:00,0.485; !- Field 17 Schedule:Compact, BLDG_LIGHT_OFFICE_BSMT_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 7:00,0.1, !- Field 3 Until: 8:00,0.447984375, !- Field 4 Until: 16:00,0.806371875, !- Field 5 Until: 22:00,0.268790625, !- Field 6 Until: 23:00,0.3, !- Field 7 Until: 24:00,0.1, !- Field 8 For: SummerDesignDay, !- Field 9 Until: 24:00,1, !- Field 10 For: WinterDesignDay, !- Field 11 Until: 24:00,0, !- Field 12 For: Saturday, !- Field 13 Until: 7:00,0.1, !- Field 14 Until: 8:00,0.17919375, !- Field 15 Until: 18:00,0.3583875, !- Field 16 Until: 19:00,0.089596875, !- Field 17 Until: 24:00,0.1, !- Field 18 For: Sunday Holidays AllOtherDays, !- Field 19 Until: 8:00,0.05, !- Field 20 Until: 16:00,0.089596875, !- Field 21 Until: 24:00,0.05; !- Field 22 Schedule:Compact, BLDG_LIGHT_OFFICE_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 7:00,0.1, !- Field 3 Until: 8:00,0.40595, !- Field 4 Until: 16:00,0.73071, !- Field 5 Until: 22:00,0.24357, !- Field 6 Until: 23:00,0.3, !- Field 7 Until: 24:00,0.1, !- Field 8 For: SummerDesignDay, !- Field 9 Until: 24:00,1, !- Field 10 For: WinterDesignDay, !- Field 11 Until: 24:00,0, !- Field 12 For: Saturday, !- Field 13 Until: 7:00,0.1, !- Field 14 Until: 8:00,0.16238, !- Field 15 Until: 18:00,0.32476, !- Field 16 Until: 19:00,0.08119, !- Field 17 Until: 24:00,0.1, !- Field 18 For: Sunday Holidays AllOtherDays, !- Field 19 Until: 8:00,0.05, !- Field 20 Until: 16:00,0.08119, !- Field 21 Until: 24:00,0.05; !- Field 22 Schedule:Compact, BLDG_LIGHT_RADIOLOGY_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 7:00,0.1, !- Field 3 Until: 8:00,0.39, !- Field 4 Until: 16:00,0.702, !- Field 5 Until: 22:00,0.234, !- Field 6 Until: 23:00,0.3, !- Field 7 Until: 24:00,0.1, !- Field 8 For: SummerDesignDay, !- Field 9 Until: 24:00,1, !- Field 10 For: WinterDesignDay, !- Field 11 Until: 24:00,0, !- Field 12 For: Saturday, !- Field 13 Until: 7:00,0.1, !- Field 14 Until: 8:00,0.156, !- Field 15 Until: 18:00,0.312, !- Field 16 Until: 19:00,0.078, !- Field 17 Until: 24:00,0.1, !- Field 18 For: Sunday Holidays AllOtherDays, !- Field 19 Until: 8:00,0.05, !- Field 20 Until: 16:00,0.078, !- Field 21 Until: 24:00,0.05; !- Field 22 Schedule:Compact, BLDG_LIGHT_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 7:00,0.1, !- Field 3 Until: 8:00,0.5, !- Field 4 Until: 16:00,0.9, !- Field 5 Until: 23:00,0.3, !- Field 6 Until: 24:00,0.1, !- Field 7 For: SummerDesignDay, !- Field 8 Until: 24:00,1, !- Field 9 For: WinterDesignDay, !- Field 10 Until: 24:00,0, !- Field 11 For: Saturday, !- Field 12 Until: 7:00,0.1, !- Field 13 Until: 8:00,0.2, !- Field 14 Until: 18:00,0.4, !- Field 15 Until: 24:00,0.1, !- Field 16 For: Sunday Holidays AllOtherDays, !- Field 17 Until: 8:00,0.05, !- Field 18 Until: 16:00,0.1, !- Field 19 Until: 24:00,0.05; !- Field 20 Schedule:Compact, walkin_occ_lght_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 7:00,0.1, !- Field 3 Until: 8:00,0.26, !- Field 5 Until: 16:00,0.468, !- Field 7 Until: 23:00,0.156, !- Field 9 Until: 24:00,0.1, !- Field 11 For: SummerDesignDay, !- Field 13 Until: 24:00,1, !- Field 14 For: WinterDesignDay, !- Field 16 Until: 24:00,0, !- Field 17 For: Saturday, !- Field 19 Until: 7:00,0.1, !- Field 20 Until: 8:00,0.104, !- Field 22 Until: 18:00,0.208, !- Field 24 Until: 24:00,0.1, !- Field 26 For: Sunday Holidays AllOtherDays, !- Field 28 Until: 8:00,0.05, !- Field 29 Until: 16:00,0.052, !- Field 31 Until: 24:00,0.05; !- Field 33 Schedule:Compact, BLDG_OCC_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 07:00,0.0, !- Field 3 Until: 08:00,0.1, !- Field 5 Until: 09:00,0.5, !- Field 7 Until: 17:00,0.8, !- Field 9 Until: 18:00,0.5, !- Field 11 Until: 20:00,0.3, !- Field 13 Until: 22:00,0.2, !- Field 15 Until: 24:00,0.0, !- Field 17 For: SummerDesignDay, !- Field 19 Until: 24:00,1.0, !- Field 20 For: WinterDesignDay, !- Field 22 Until: 24:00,0.0, !- Field 23 For: Saturday, !- Field 25 Until: 07:00,0.0, !- Field 26 Until: 08:00,0.1, !- Field 28 Until: 09:00,0.3, !- Field 30 Until: 17:00,0.4, !- Field 32 Until: 19:00,0.1, !- Field 34 Until: 24:00,0.0, !- Field 36 For: Sunday Holidays AllOtherDays, !- Field 38 Until: 08:00,0.0, !- Field 39 Until: 16:00,0.05, !- Field 41 Until: 24:00,0.0; !- Field 43 Schedule:Compact, BLDG_OCC_EXTD_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 07:00,0.4, !- Field 3 Until: 08:00,0.5, !- Field 5 Until: 09:00,0.6, !- Field 7 Until: 17:00,0.8, !- Field 9 Until: 18:00,0.6, !- Field 11 Until: 20:00,0.5, !- Field 13 Until: 24:00,0.4, !- Field 15 For: SummerDesignDay, !- Field 17 Until: 24:00,1.0, !- Field 18 For: WinterDesignDay, !- Field 20 Until: 24:00,0.0, !- Field 21 For: Saturday, !- Field 23 Until: 07:00,0.4, !- Field 24 Until: 08:00,0.5, !- Field 26 Until: 17:00,0.6, !- Field 28 Until: 19:00,0.5, !- Field 30 Until: 24:00,0.4, !- Field 32 For: Sunday Holidays AllOtherDays, !- Field 34 Until: 08:00,0.4, !- Field 35 Until: 16:00,0.6, !- Field 37 Until: 24:00,0.4; !- Field 39 Schedule:Compact, BLDG_EQUIP_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 07:00,0.3492682264, !- Field 3 Until: 08:00,0.6818012803, !- Field 5 Until: 16:00,0.8766016461, !- Field 7 Until: 22:00,0.5844010974, !- Field 9 Until: 23:00,0.5239023396, !- Field 11 Until: 24:00,0.3492682264, !- Field 13 For: SummerDesignDay, !- Field 15 Until: 24:00,1.0, !- Field 16 For: WinterDesignDay, !- Field 18 Until: 24:00,0.0, !- Field 19 For: Saturday, !- Field 21 Until: 07:00,0.3492682264, !- Field 22 Until: 08:00,0.4870009145, !- Field 24 Until: 18:00,0.63310118885, !- Field 26 Until: 24:00,0.3492682264, !- Field 28 For: Sunday Holidays AllOtherDays, !- Field 30 Until: 08:00,0.2619511698, !- Field 31 Until: 16:00,0.3492682264, !- Field 33 Until: 24:00,0.2619511698; !- Field 35 Schedule:Compact, BLDG_EQUIP_EXTD_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 07:00,0.40, !- Field 3 Until: 08:00,0.70, !- Field 5 Until: 16:00,0.90, !- Field 7 Until: 23:00,0.60, !- Field 9 Until: 24:00,0.40, !- Field 11 For: SummerDesignDay, !- Field 13 Until: 24:00,1.0, !- Field 14 For: WinterDesignDay, !- Field 16 Until: 24:00,0.0, !- Field 17 For: Saturday, !- Field 19 Until: 07:00,0.40, !- Field 20 Until: 08:00,0.50, !- Field 22 Until: 18:00,0.65, !- Field 24 Until: 24:00,0.40, !- Field 26 For: Sunday Holidays AllOtherDays, !- Field 28 Until: 08:00,0.40, !- Field 29 Until: 16:00,0.60, !- Field 31 Until: 24:00,0.40; !- Field 33 Schedule:Compact, BLDG_ELEVATORS, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,1.00, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,0.20, !- Field 6 For: Weekdays, !- Field 8 Until: 07:00,0.2, !- Field 9 Until: 08:00,0.5, !- Field 11 Until: 09:00,0.75, !- Field 13 Until: 10:00,1.00, !- Field 15 Until: 11:00,1.00, !- Field 17 Until: 12:00,1.00, !- Field 19 Until: 13:00,0.75, !- Field 21 Until: 14:00,1.00, !- Field 23 Until: 15:00,1.00, !- Field 25 Until: 16:00,1.00, !- Field 27 Until: 17:00,1.00, !- Field 29 Until: 18:00,1.00, !- Field 31 Until: 19:00,0.52, !- Field 33 Until: 20:00,0.52, !- Field 35 Until: 21:00,0.52, !- Field 37 Until: 22:00,0.28, !- Field 39 Until: 24:00,0.2, !- Field 41 For: Saturday, !- Field 43 Until: 07:00,0.2, !- Field 44 Until: 08:00,0.4, !- Field 46 Until: 09:00,0.46, !- Field 48 Until: 10:00,0.70, !- Field 50 Until: 11:00,0.70, !- Field 52 Until: 12:00,0.70, !- Field 54 Until: 13:00,0.51, !- Field 56 Until: 14:00,0.51, !- Field 58 Until: 15:00,0.51, !- Field 60 Until: 16:00,0.51, !- Field 62 Until: 17:00,0.51, !- Field 64 Until: 18:00,0.25, !- Field 66 Until: 24:00,0.2, !- Field 68 For: AllOtherDays, !- Field 70 Until: 08:00,0.2, !- Field 71 Until: 16:00,0.4, !- Field 73 Until: 24:00,0.2; !- Field 75 Schedule:Compact, ELEV_LIGHT_FAN_SCH_24_7, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1; !- Field 3 Schedule:Compact, ELEV_LIGHT_FAN_SCH_ADD_DF, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,1.00, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,0.20, !- Field 6 For: Weekdays, !- Field 8 Until: 07:00,0.2, !- Field 9 Until: 08:00,0.5, !- Field 11 Until: 09:00,1.00, !- Field 13 Until: 10:00,1.00, !- Field 15 Until: 11:00,1.00, !- Field 17 Until: 12:00,1.00, !- Field 19 Until: 13:00,1.00, !- Field 21 Until: 14:00,1.00, !- Field 23 Until: 15:00,1.00, !- Field 25 Until: 16:00,1.00, !- Field 27 Until: 17:00,1.00, !- Field 29 Until: 18:00,1.00, !- Field 31 Until: 19:00,0.52, !- Field 33 Until: 20:00,0.52, !- Field 35 Until: 21:00,0.52, !- Field 37 Until: 22:00,0.28, !- Field 39 Until: 24:00,0.2, !- Field 41 For: Saturday, !- Field 43 Until: 07:00,0.2, !- Field 44 Until: 08:00,0.4, !- Field 46 Until: 09:00,0.46, !- Field 48 Until: 10:00,0.70, !- Field 50 Until: 11:00,0.70, !- Field 52 Until: 12:00,0.70, !- Field 54 Until: 13:00,0.51, !- Field 56 Until: 14:00,0.51, !- Field 58 Until: 15:00,0.51, !- Field 60 Until: 16:00,0.51, !- Field 62 Until: 17:00,0.51, !- Field 64 Until: 18:00,0.25, !- Field 66 Until: 24:00,0.2, !- Field 68 For: AllOtherDays, !- Field 70 Until: 08:00,0.2, !- Field 71 Until: 16:00,0.4, !- Field 73 Until: 24:00,0.2; !- Field 75 Schedule:Compact, Dishwashing Booster Water Inlet Temp Schedule, !- Name Any Number, !- Schedule Type Limits Name THROUGH: 12/31, !- Field 1 FOR: AllDays, !- Field 2 UNTIL: 24:00,60.00; !- Field 3 Schedule:Compact, Dishwashing Booster Setpoint Temp Schedule, !- Name Any Number, !- Schedule Type Limits Name THROUGH: 12/31, !- Field 1 FOR: AllDays, !- Field 2 UNTIL: 24:00,82.22; !- Field 3 Schedule:Compact, Laundry Setpoint Temp Schedule, !- Name Any Number, !- Schedule Type Limits Name THROUGH: 12/31, !- Field 1 FOR: AllDays, !- Field 2 UNTIL: 24:00,82.22; !- Field 3 Schedule:Compact, LAUNDRY_SWH_SCH, !- Name Fraction, !- Schedule Type Limits Name THROUGH: 12/31, !- Field 1 FOR: AllDays, !- Field 2 UNTIL: 08:00,0.00, !- Field 3 UNTIL: 15:00,1.00, !- Field 5 UNTIL: 24:00,0.00; !- Field 7 Schedule:Compact, BLDG_SWH_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 07:00,0.00, !- Field 3 Until: 08:00,0.17, !- Field 5 Until: 09:00,0.58, !- Field 7 Until: 10:00,0.66, !- Field 9 Until: 11:00,0.78, !- Field 11 Until: 12:00,0.82, !- Field 13 Until: 13:00,0.71, !- Field 15 Until: 14:00,0.82, !- Field 17 Until: 15:00,0.78, !- Field 19 Until: 16:00,0.74, !- Field 21 Until: 17:00,0.63, !- Field 23 Until: 18:00,0.41, !- Field 25 Until: 21:00,0.18, !- Field 27 Until: 22:00,0.1, !- Field 29 Until: 24:00,0.00, !- Field 31 For: Saturday WinterDesignDay, !- Field 33 Until: 07:00,0.00, !- Field 34 Until: 08:00,0.01, !- Field 36 Until: 09:00,0.2, !- Field 38 Until: 10:00,0.28, !- Field 40 Until: 12:00,0.3, !- Field 42 Until: 14:00,0.24, !- Field 44 Until: 17:00,0.23, !- Field 46 Until: 19:00,0.10, !- Field 48 Until: 24:00,0.00, !- Field 50 For: Sunday Holidays AllOtherDays, !- Field 52 Until: 08:00,0.00, !- Field 53 Until: 16:00,0.01, !- Field 55 Until: 24:00,0.00; !- Field 57 Schedule:Compact, BLDG_SWH_EXTD_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 07:00,0.3, !- Field 3 Until: 08:00,0.5, !- Field 5 Until: 09:00,0.58, !- Field 7 Until: 10:00,0.66, !- Field 9 Until: 11:00,0.78, !- Field 11 Until: 12:00,0.82, !- Field 13 Until: 13:00,0.71, !- Field 15 Until: 14:00,0.82, !- Field 17 Until: 15:00,0.78, !- Field 19 Until: 16:00,0.74, !- Field 21 Until: 17:00,0.63, !- Field 23 Until: 18:00,0.41, !- Field 25 Until: 21:00,0.35, !- Field 27 Until: 24:00,0.30, !- Field 29 For: Saturday WinterDesignDay, !- Field 31 Until: 08:00,0.3, !- Field 32 Until: 09:00,0.4, !- Field 34 Until: 10:00,0.5, !- Field 36 Until: 17:00,0.6, !- Field 38 Until: 18:00,0.5, !- Field 40 Until: 24:00,0.3, !- Field 42 For: Sunday Holidays AllOtherDays, !- Field 44 Until: 08:00,0.3, !- Field 45 Until: 09:00,0.4, !- Field 47 Until: 10:00,0.5, !- Field 49 Until: 17:00,0.6, !- Field 51 Until: 18:00,0.5, !- Field 53 Until: 24:00,0.3; !- Field 55 Schedule:Compact, ACTIVITY_SCH, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,120.; !- Field 3 Schedule:Compact, WORK_EFF_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.0; !- Field 3 Schedule:Compact, AIR_VELO_SCH, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, CLOTHING_SCH, !- Name Any Number, !- Schedule Type Limits Name Through: 04/30, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1.0, !- Field 3 Through: 09/30, !- Field 5 For: AllDays, !- Field 6 Until: 24:00,0.5, !- Field 7 Through: 12/31, !- Field 9 For: AllDays, !- Field 10 Until: 24:00,1.0; !- Field 11 Schedule:Compact, INFIL_SCH_PNNL, !- Name fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 24:00,0.25, !- Field 3 For: Saturday WinterDesignDay, !- Field 5 Until: 24:00,0.25, !- Field 6 For: Sunday Holidays AllOtherDays, !- Field 8 Until: 24:00,0.25; !- Field 9 Schedule:Compact, SHADING_SCH, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.0; !- Field 3 Schedule:Compact, PlantOnSched, !- Name On/Off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1.0; !- Field 3 Schedule:Compact, ReheatCoilAvailSched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1.0; !- Field 3 Schedule:Compact, CoolingCoilAvailSched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1.0; !- Field 3 Schedule:Compact, HTGSETP_SCH, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: ALLDays, !- Field 2 Until: 24:00,21.; !- Field 3 Schedule:Compact, CLGSETP_SCH, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,24.0; !- Field 3 Schedule:Compact, Humidity Setpoint Schedule, !- Name Humidity, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 24:00,50, !- Field 3 For: Saturday WinterDesignDay, !- Field 5 Until: 24:00,50, !- Field 6 For: Sunday Holidays AllOtherDays, !- Field 8 Until: 24:00,50; !- Field 9 Schedule:Compact, MinOA_Sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1.0; !- Field 3 Schedule:Compact, BLDG_OA_FRAC_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 06:00,0.00, !- Field 3 Until: 18:00,0.25, !- Field 5 Until: 24:00,0.00, !- Field 7 For: SummerDesignDay, !- Field 9 Until: 06:00,0.00, !- Field 10 Until: 18:00,0.25, !- Field 12 Until: 24:00,0.00, !- Field 14 For: WinterDesignDay, !- Field 16 Until: 06:00,0.00, !- Field 17 Until: 18:00,0.25, !- Field 19 Until: 24:00,0.00, !- Field 21 For: Saturday, !- Field 23 Until: 06:00,0.00, !- Field 24 Until: 18:00,0.25, !- Field 26 Until: 24:00,0.00, !- Field 28 For: Sunday Holidays AllOtherDays, !- Field 30 Until: 24:00,0.00; !- Field 31 Schedule:Compact, OR_MinSA_Sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 09:00,0.2, !- Field 3 This is changed to a PARM variable because 2015 IECC has 30pct minimum MDP and 90.1-2010 has 20pct minimum. Until: 18:00,1.0, !- Field 5 Until: 24:00,0.2, !- Field 7 For: SummerDesignDay, !- Field 9 Until: 24:00,1.0, !- Field 10 For: WinterDesignDay, !- Field 12 Until: 24:00,0.2, !- Field 13 For: Saturday, !- Field 15 Until: 09:00,0.2, !- Field 16 Until: 17:00,1.0, !- Field 18 Until: 24:00,0.2, !- Field 20 For: Sunday Holidays AllOtherDays, !- Field 22 Until: 24:00,0.2; !- Field 23 Schedule:Compact, VAV_ER_OAminOAFracSchedule, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.3300; !- Field 3 Schedule:Compact, VAV_OR_OAminOAFracSchedule, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.3300; !- Field 3 Schedule:Compact, VAV_ICU_OAminOAFracSchedule, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.3300; !- Field 3 Schedule:Compact, VAV_PATRMS_OAminOAFracSchedule, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.3300; !- Field 3 Schedule:Compact, VAV_LABS_OAminOAFracSchedule, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1.0000; !- Field 3 Schedule:Compact, Dual Zone Control Type Sched, !- Name Control Type, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,4; !- Field 3 Schedule:Compact, Cool-Supply-Air-Temp-Sch,!- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,12.8; !- Field 3 Schedule:Compact, Heat-Supply-Air-Temp-Sch,!- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,12.8; !- Field 3 Schedule:Compact, CW-Loop-Temp-Schedule, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,6.7; !- Field 3 Schedule:Compact, HW-Loop-Temp-Schedule, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,82; !- Field 3 Schedule:Compact, ER_Exam1_Mult4_Flr_1 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, ER_Exam1_Mult4_Flr_1 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, ER_Exam1_Mult4_Flr_1 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, ER_Exam1_Mult4_Flr_1 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, ER_Trauma1_Flr_1 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, ER_Trauma1_Flr_1 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, ER_Trauma1_Flr_1 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, ER_Trauma1_Flr_1 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, ER_Exam3_Mult4_Flr_1 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, ER_Exam3_Mult4_Flr_1 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, ER_Exam3_Mult4_Flr_1 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, ER_Exam3_Mult4_Flr_1 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, ER_Trauma2_Flr_1 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, ER_Trauma2_Flr_1 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, ER_Trauma2_Flr_1 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, ER_Trauma2_Flr_1 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, ER_Triage_Mult4_Flr_1 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, ER_Triage_Mult4_Flr_1 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, ER_Triage_Mult4_Flr_1 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, ER_Triage_Mult4_Flr_1 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, OR1_Flr_2 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, OR1_Flr_2 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, OR1_Flr_2 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, OR1_Flr_2 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, OR2_Mult5_Flr_2 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, OR2_Mult5_Flr_2 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, OR2_Mult5_Flr_2 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, OR2_Mult5_Flr_2 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, OR3_Flr_2 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, OR3_Flr_2 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, OR3_Flr_2 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, OR3_Flr_2 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, OR4_Flr_2 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, OR4_Flr_2 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, OR4_Flr_2 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, OR4_Flr_2 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, PatRoom1_Mult10_Flr_3 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, PatRoom1_Mult10_Flr_3 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, PatRoom1_Mult10_Flr_3 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, PatRoom1_Mult10_Flr_3 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, PatRoom2_Flr_3 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, PatRoom2_Flr_3 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, PatRoom2_Flr_3 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, PatRoom2_Flr_3 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, PatRoom3_Mult10_Flr_3 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, PatRoom3_Mult10_Flr_3 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, PatRoom3_Mult10_Flr_3 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, PatRoom3_Mult10_Flr_3 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, PatRoom4_Flr_3 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, PatRoom4_Flr_3 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, PatRoom4_Flr_3 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, PatRoom4_Flr_3 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, PatRoom5_Mult10_Flr_3 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, PatRoom5_Mult10_Flr_3 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, PatRoom5_Mult10_Flr_3 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, PatRoom5_Mult10_Flr_3 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, PhysTherapy_Flr_3 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, PhysTherapy_Flr_3 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, PhysTherapy_Flr_3 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, PhysTherapy_Flr_3 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, PatRoom6_Flr_3 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, PatRoom6_Flr_3 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, PatRoom6_Flr_3 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, PatRoom6_Flr_3 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, PatRoom7_Mult10_Flr_3 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, PatRoom7_Mult10_Flr_3 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, PatRoom7_Mult10_Flr_3 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, PatRoom7_Mult10_Flr_3 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, PatRoom8_Flr_3 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, PatRoom8_Flr_3 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, PatRoom8_Flr_3 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, PatRoom8_Flr_3 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, Lab_Flr_3 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, Lab_Flr_3 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, Lab_Flr_3 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, Lab_Flr_3 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, PatRoom1_Mult10_Flr_4 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, PatRoom1_Mult10_Flr_4 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, PatRoom1_Mult10_Flr_4 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, PatRoom1_Mult10_Flr_4 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, PatRoom2_Flr_4 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, PatRoom2_Flr_4 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, PatRoom2_Flr_4 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, PatRoom2_Flr_4 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, PatRoom3_Mult10_Flr_4 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, PatRoom3_Mult10_Flr_4 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, PatRoom3_Mult10_Flr_4 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, PatRoom3_Mult10_Flr_4 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, PatRoom4_Flr_4 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, PatRoom4_Flr_4 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, PatRoom4_Flr_4 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, PatRoom4_Flr_4 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, PatRoom5_Mult10_Flr_4 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, PatRoom5_Mult10_Flr_4 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, PatRoom5_Mult10_Flr_4 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, PatRoom5_Mult10_Flr_4 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, Radiology_Flr_4 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, Radiology_Flr_4 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, Radiology_Flr_4 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, Radiology_Flr_4 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, PatRoom6_Flr_4 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, PatRoom6_Flr_4 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, PatRoom6_Flr_4 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, PatRoom6_Flr_4 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, PatRoom7_Mult10_Flr_4 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, PatRoom7_Mult10_Flr_4 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, PatRoom7_Mult10_Flr_4 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, PatRoom7_Mult10_Flr_4 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, PatRoom8_Flr_4 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, PatRoom8_Flr_4 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, PatRoom8_Flr_4 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, PatRoom8_Flr_4 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, Lab_Flr_4 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, Lab_Flr_4 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, Lab_Flr_4 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, Lab_Flr_4 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, Kitchen_Flr_5 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, Kitchen_Flr_5 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, Kitchen_Flr_5 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, Kitchen_Flr_5 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, Kitchen_Flr_5_Case:1_WALKINFREEZER_CaseDefrost2aDaySched, !- Name ON/OFF, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For:AllDays, !- Field 2 Interpolate:Average, !- Field 3 Until: 11:00,0, !- Field 4 Until: 11:20,1, !- Field 6 Until: 23:00,0, !- Field 8 Until: 23:20,1, !- Field 10 Until: 24:00,0; !- Field 12 Schedule:Compact, Kitchen_Flr_5_Case:1_WALKINFREEZER_CaseDripDown2aDaySched, !- Name ON/OFF, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For:AllDays, !- Field 2 Interpolate:Average, !- Field 3 Until: 11:00,0, !- Field 4 Until: 11:30,1, !- Field 6 Until: 23:00,0, !- Field 8 Until: 23:30,1, !- Field 10 Until: 24:00,0; !- Field 12 Schedule:Compact, Kitchen_Flr_5_Case:1_WALKINFREEZER_WalkInStockingSched, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Tuesday Friday, !- Field 2 Until: 4:00,0.0, !- Field 3 Until: 5:00,725.0, !- Field 5 Until: 6:00,417.0, !- Field 7 Until: 7:00,290.0, !- Field 9 Until: 24:00,0.0, !- Field 11 For: AllOtherDays, !- Field 13 Until: 4:00,0.0, !- Field 14 Until: 5:00,125.0, !- Field 16 Until: 6:00,117.0, !- Field 18 Until: 7:00,90.0, !- Field 20 Until: 19:00,0.0, !- Field 22 Until: 20:00,125.0, !- Field 24 Until: 21:00,117.0, !- Field 26 Until: 22:00,90.0, !- Field 28 Until: 24:00,0.0; !- Field 30 Schedule:Compact, Kitchen_Flr_5_Case:1_WALKINFREEZER_CaseCreditReduxSched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For:AllDays, !- Field 2 Interpolate:No, !- Field 3 Until: 7:00,0.2, !- Field 4 Until: 21:00,0.4, !- Field 6 Until: 24:00,0.2; !- Field 8 Schedule:Compact, Kitchen_Flr_5_Case:2_SELFCONTAINEDDISPLAYCASE_CaseStockingSched, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For:AllDays, !- Field 2 Until: 6:00,0.0, !- Field 3 Until: 7:00,50.0, !- Field 5 Until: 9:00,70.0, !- Field 7 Until: 10:00,80.0, !- Field 9 Until: 11:00,70.0, !- Field 11 Until: 13:00,50.0, !- Field 13 Until: 14:00,80.0, !- Field 15 Until: 15:00,90.0, !- Field 17 Until: 16:00,80.0, !- Field 19 Until: 24:00,0.0; !- Field 21 Schedule:Compact, Kitchen_Exhaust_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 07:00,0, !- Field 3 Until: 24:00,1; !- Field 5 !- Per 90.1-2010 G3.1.3.11, the tower shall be controlled to maintain a 70F leaving water temperature !- where weather permits, floating up to leaving water temperature at design conditions. Schedule:Compact, Tower-Loop-Temp-Schedule,!- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,21.1; !- Field 3 Schedule:Compact, SHWSys1-Loop-Temp-Schedule, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60; !- Field 3 Schedule:Compact, SHWSys1 Water Heater Setpoint Temperature Schedule, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, SHWSys1 Water Heater Ambient Temperature Schedule, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,22.0; !- Field 3 Schedule:Compact, VAV_SAT_SCH, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,12.8; !- Field 3 Schedule:Compact, MinRelHumSetSch, !- Name Humidity, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,40; !- Field 3 Schedule:Compact, MinRelHumSetSch_addDI, !- Name Humidity, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,30; !- Field 3 Schedule:Compact, MinRelHumSetSch_addDI_ICU, !- Name Humidity, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,35; !- Field 3 Schedule:Compact, MaxRelHumSetSch, !- Name Humidity, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60; !- Field 3 Schedule:Constant, VAV_1 Max OA Fraction, !- Name , !- Schedule Type Limits Name 1.0; !- Hourly Value Schedule:Constant, VAV_2 Max OA Fraction, !- Name , !- Schedule Type Limits Name 1.0; !- Hourly Value Schedule:Constant, Heat Recovery Chiller Setpoint, Temperature, 48.89; Schedule:Constant, Dummy Water Heater Setpoint, Temperature, 10.0; !- Low enough to ensure that the burner doesn't turn on Schedule:Constant, Bypass Heat Exchanger Status, Any Number, 1; !- =========== ALL OBJECTS IN CLASS: PEOPLE =========== People, Basement, !- Name Basement, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 100.5885, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, ER_Exam1_Mult4_Flr_1, !- Name ER_Exam1_Mult4_Flr_1, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 5.9976, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, ER_Trauma1_Flr_1, !- Name ER_Trauma1_Flr_1, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 5.9976, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, ER_Exam3_Mult4_Flr_1, !- Name ER_Exam3_Mult4_Flr_1, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 5.9976, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, ER_Trauma2_Flr_1, !- Name ER_Trauma2_Flr_1, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 5.9976, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, ER_Triage_Mult4_Flr_1, !- Name ER_Triage_Mult4_Flr_1, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 5.9976, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Office1_Mult4_Flr_1, !- Name Office1_Mult4_Flr_1, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 1.05, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Lobby_Records_Flr_1, !- Name Lobby_Records_Flr_1, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 21.1586, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Corridor_Flr_1, !- Name Corridor_Flr_1, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 6.1228, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, ER_NurseStn_Lobby_Flr_1, !- Name ER_NurseStn_Lobby_Flr_1, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 17.7269, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, OR1_Flr_2, !- Name OR1_Flr_2, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 2.9988, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, OR2_Mult5_Flr_2, !- Name OR2_Mult5_Flr_2, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 2.9988, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, OR3_Flr_2, !- Name OR3_Flr_2, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 2.9988, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, OR4_Flr_2, !- Name OR4_Flr_2, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 11.9956, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, IC_PatRoom1_Mult5_Flr_2, !- Name IC_PatRoom1_Mult5_Flr_2, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 1.1244, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, IC_PatRoom2_Flr_2, !- Name IC_PatRoom2_Flr_2, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 1.4994, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, IC_PatRoom3_Mult6_Flr_2, !- Name IC_PatRoom3_Mult6_Flr_2, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 1.1244, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, ICU_Flr_2, !- Name ICU_Flr_2, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 33.2462, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, ICU_NurseStn_Lobby_Flr_2,!- Name ICU_NurseStn_Lobby_Flr_2,!- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 9.5946, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Corridor_Flr_2, !- Name Corridor_Flr_2, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 6.1228, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, OR_NurseStn_Lobby_Flr_2, !- Name OR_NurseStn_Lobby_Flr_2, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 14.528, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, PatRoom1_Mult10_Flr_3, !- Name PatRoom1_Mult10_Flr_3, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 1.1244, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, PatRoom2_Flr_3, !- Name PatRoom2_Flr_3, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 1.8744, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, PatRoom3_Mult10_Flr_3, !- Name PatRoom3_Mult10_Flr_3, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 1.0873, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, PatRoom4_Flr_3, !- Name PatRoom4_Flr_3, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 1.8744, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, PatRoom5_Mult10_Flr_3, !- Name PatRoom5_Mult10_Flr_3, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 1.1244, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, PhysTherapy_Flr_3, !- Name PhysTherapy_Flr_3, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 26.2404, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, PatRoom6_Flr_3, !- Name PatRoom6_Flr_3, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 1.4994, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, PatRoom7_Mult10_Flr_3, !- Name PatRoom7_Mult10_Flr_3, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 1.0873, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, PatRoom8_Flr_3, !- Name PatRoom8_Flr_3, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 1.4994, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, NurseStn_Lobby_Flr_3, !- Name NurseStn_Lobby_Flr_3, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 12.9952, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Lab_Flr_3, !- Name Lab_Flr_3, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 14.2446, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Corridor_SE_Flr_3, !- Name Corridor_SE_Flr_3, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 6.0978, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Corridor_NW_Flr_3, !- Name Corridor_NW_Flr_3, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 6.0978, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, PatRoom1_Mult10_Flr_4, !- Name PatRoom1_Mult10_Flr_4, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 1.1244, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, PatRoom2_Flr_4, !- Name PatRoom2_Flr_4, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 1.8744, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, PatRoom3_Mult10_Flr_4, !- Name PatRoom3_Mult10_Flr_4, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 1.0873, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, PatRoom4_Flr_4, !- Name PatRoom4_Flr_4, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 1.8744, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, PatRoom5_Mult10_Flr_4, !- Name PatRoom5_Mult10_Flr_4, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 1.1244, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Radiology_Flr_4, !- Name Radiology_Flr_4, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 26.2404, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, PatRoom6_Flr_4, !- Name PatRoom6_Flr_4, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 1.4994, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, PatRoom7_Mult10_Flr_4, !- Name PatRoom7_Mult10_Flr_4, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 1.0873, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, PatRoom8_Flr_4, !- Name PatRoom8_Flr_4, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 1.4994, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, NurseStn_Lobby_Flr_4, !- Name NurseStn_Lobby_Flr_4, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 12.9952, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Lab_Flr_4, !- Name Lab_Flr_4, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 14.2446, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Corridor_SE_Flr_4, !- Name Corridor_SE_Flr_4, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 6.0978, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Corridor_NW_Flr_4, !- Name Corridor_NW_Flr_4, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 6.0978, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Dining_Flr_5, !- Name Dining_Flr_5, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 74.9725, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, NurseStn_Lobby_Flr_5, !- Name NurseStn_Lobby_Flr_5, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 14.9279, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Kitchen_Flr_5, !- Name Kitchen_Flr_5, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 49.9818, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Office1_Flr_5, !- Name Office1_Flr_5, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 5.2498, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Office2_Mult5_Flr_5, !- Name Office2_Mult5_Flr_5, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 5.2483, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Office3_Flr_5, !- Name Office3_Flr_5, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 5.2483, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Office4_Mult6_Flr_5, !- Name Office4_Mult6_Flr_5, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 1.05, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Corridor_Flr_5, !- Name Corridor_Flr_5, !- Zone or ZoneList Name BLDG_OCC_EXTD_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 5.3981, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type !- =========== ALL OBJECTS IN CLASS: LIGHTS =========== Lights, Basement_Lights, !- Name Basement, !- Zone or ZoneList Name BLDG_LIGHT_OFFICE_BSMT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.888902667, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, ER_Exam1_Mult4_Flr_1_Lights, !- Name ER_Exam1_Mult4_Flr_1, !- Zone or ZoneList Name BLDG_LIGHT_EXAM_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 15.06947458, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, ER_Trauma1_Flr_1_Lights, !- Name ER_Trauma1_Flr_1, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 15.06947458, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, ER_Exam3_Mult4_Flr_1_Lights, !- Name ER_Exam3_Mult4_Flr_1, !- Zone or ZoneList Name BLDG_LIGHT_EXAM_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 15.06947458, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, ER_Trauma2_Flr_1_Lights, !- Name ER_Trauma2_Flr_1, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 15.06947458, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, ER_Triage_Mult4_Flr_1_Lights, !- Name ER_Triage_Mult4_Flr_1, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 15.06947458, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Office1_Mult4_Flr_1_Lights, !- Name Office1_Mult4_Flr_1, !- Zone or ZoneList Name BLDG_LIGHT_OFFICE_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.888902667, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Lobby_Records_Flr_1_Lights, !- Name Lobby_Records_Flr_1, !- Zone or ZoneList Name BLDG_LIGHT_LOBBYFLR1_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 8.794114811, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Corridor_Flr_1_Lights, !- Name Corridor_Flr_1, !- Zone or ZoneList Name BLDG_LIGHT_CORRIDOR_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, ER_NurseStn_Lobby_Flr_1_Lights, !- Name ER_NurseStn_Lobby_Flr_1, !- Zone or ZoneList Name BLDG_LIGHT_NURSEFLR1_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 11.17293901, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, OR1_Flr_2_Lights, !- Name OR1_Flr_2, !- Zone or ZoneList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 24.32643754, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, OR2_Mult5_Flr_2_Lights, !- Name OR2_Mult5_Flr_2, !- Zone or ZoneList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 24.32643754, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, OR3_Flr_2_Lights, !- Name OR3_Flr_2, !- Zone or ZoneList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 24.32643754, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, OR4_Flr_2_Lights, !- Name OR4_Flr_2, !- Zone or ZoneList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 24.32643754, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, IC_PatRoom1_Mult5_Flr_2_Lights, !- Name IC_PatRoom1_Mult5_Flr_2, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 13.45488802, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, IC_PatRoom2_Flr_2_Lights,!- Name IC_PatRoom2_Flr_2, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 13.45488802, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, IC_PatRoom3_Mult6_Flr_2_Lights, !- Name IC_PatRoom3_Mult6_Flr_2, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 13.45488802, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, ICU_Flr_2_Lights, !- Name ICU_Flr_2, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 13.45488802, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, ICU_NurseStn_Lobby_Flr_2_Lights, !- Name ICU_NurseStn_Lobby_Flr_2,!- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 12.59377519,!- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Corridor_Flr_2_Lights, !- Name Corridor_Flr_2, !- Zone or ZoneList Name BLDG_LIGHT_CORRIDOR_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, OR_NurseStn_Lobby_Flr_2_Lights, !- Name OR_NurseStn_Lobby_Flr_2, !- Zone or ZoneList Name BLDG_LIGHT_NURSEFLR234_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 10.46252093, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, PatRoom1_Mult10_Flr_3_Lights, !- Name PatRoom1_Mult10_Flr_3, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.319459084, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, PatRoom2_Flr_3_Lights, !- Name PatRoom2_Flr_3, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.319459084, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, PatRoom3_Mult10_Flr_3_Lights, !- Name PatRoom3_Mult10_Flr_3, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.319459084, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, PatRoom4_Flr_3_Lights, !- Name PatRoom4_Flr_3, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.319459084, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, PatRoom5_Mult10_Flr_3_Lights, !- Name PatRoom5_Mult10_Flr_3, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.319459084, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, PhysTherapy_Flr_3_Lights,!- Name PhysTherapy_Flr_3, !- Zone or ZoneList Name BLDG_LIGHT_RADIOLOGY_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 9.795158479, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, PatRoom6_Flr_3_Lights, !- Name PatRoom6_Flr_3, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.319459084, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, PatRoom7_Mult10_Flr_3_Lights, !- Name PatRoom7_Mult10_Flr_3, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.319459084, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, PatRoom8_Flr_3_Lights, !- Name PatRoom8_Flr_3, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.319459084, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, NurseStn_Lobby_Flr_3_Lights, !- Name NurseStn_Lobby_Flr_3, !- Zone or ZoneList Name BLDG_LIGHT_NURSEFLR234_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 10.46252093, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Lab_Flr_3_Lights, !- Name Lab_Flr_3, !- Zone or ZoneList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 14.31600085, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Corridor_SE_Flr_3_Lights,!- Name Corridor_SE_Flr_3, !- Zone or ZoneList Name BLDG_LIGHT_CORRIDOR_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Corridor_NW_Flr_3_Lights,!- Name Corridor_NW_Flr_3, !- Zone or ZoneList Name BLDG_LIGHT_CORRIDOR_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, PatRoom1_Mult10_Flr_4_Lights, !- Name PatRoom1_Mult10_Flr_4, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.319459084, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, PatRoom2_Flr_4_Lights, !- Name PatRoom2_Flr_4, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.319459084, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, PatRoom3_Mult10_Flr_4_Lights, !- Name PatRoom3_Mult10_Flr_4, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.319459084, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, PatRoom4_Flr_4_Lights, !- Name PatRoom4_Flr_4, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.319459084, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, PatRoom5_Mult10_Flr_4_Lights, !- Name PatRoom5_Mult10_Flr_4, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.319459084, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Radiology_Flr_4_Lights, !- Name Radiology_Flr_4, !- Zone or ZoneList Name BLDG_LIGHT_RADIOLOGY_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 10.11807579, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, PatRoom6_Flr_4_Lights, !- Name PatRoom6_Flr_4, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.319459084, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, PatRoom7_Mult10_Flr_4_Lights, !- Name PatRoom7_Mult10_Flr_4, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.319459084, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, PatRoom8_Flr_4_Lights, !- Name PatRoom8_Flr_4, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.319459084, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, NurseStn_Lobby_Flr_4_Lights, !- Name NurseStn_Lobby_Flr_4, !- Zone or ZoneList Name BLDG_LIGHT_NURSEFLR234_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 10.46252093, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Lab_Flr_4_Lights, !- Name Lab_Flr_4, !- Zone or ZoneList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 14.31600085, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Corridor_SE_Flr_4_Lights,!- Name Corridor_SE_Flr_4, !- Zone or ZoneList Name BLDG_LIGHT_CORRIDOR_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Corridor_NW_Flr_4_Lights,!- Name Corridor_NW_Flr_4, !- Zone or ZoneList Name BLDG_LIGHT_CORRIDOR_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Dining_Flr_5_Lights, !- Name Dining_Flr_5, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 4.305564167,!- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, NurseStn_Lobby_Flr_5_Lights, !- Name NurseStn_Lobby_Flr_5, !- Zone or ZoneList Name BLDG_LIGHT_LOBBYFLR5_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 10.46252093, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Kitchen_Flr_5_Lights, !- Name Kitchen_Flr_5, !- Zone or ZoneList Name BLDG_LIGHT_EXTD_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 11.73266235, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Office1_Flr_5_Lights, !- Name Office1_Flr_5, !- Zone or ZoneList Name BLDG_LIGHT_OFFICE_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.888902667, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Office2_Mult5_Flr_5_Lights, !- Name Office2_Mult5_Flr_5, !- Zone or ZoneList Name BLDG_LIGHT_OFFICE_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.888902667, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Office3_Flr_5_Lights, !- Name Office3_Flr_5, !- Zone or ZoneList Name BLDG_LIGHT_OFFICE_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.888902667, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Office4_Mult6_Flr_5_Lights, !- Name Office4_Mult6_Flr_5, !- Zone or ZoneList Name BLDG_LIGHT_OFFICE_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.888902667, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Corridor_Flr_5_Lights, !- Name Corridor_Flr_5, !- Zone or ZoneList Name BLDG_LIGHT_CORRIDOR_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature !- =========== ALL OBJECTS IN CLASS: ELECTRICEQUIPMENT =========== ElectricEquipment, Basement_MiscPlug_Equip, !- Name Basement, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 30176.5332, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, ER_Exam1_Mult4_Flr_1_MiscPlug_Equip, !- Name ER_Exam1_Mult4_Flr_1, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 449.8365, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, ER_Trauma1_Flr_1_MiscPlug_Equip, !- Name ER_Trauma1_Flr_1, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1199.5641, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, ER_Exam3_Mult4_Flr_1_MiscPlug_Equip, !- Name ER_Exam3_Mult4_Flr_1, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 449.8365, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, ER_Trauma2_Flr_1_MiscPlug_Equip, !- Name ER_Trauma2_Flr_1, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1199.5641, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, ER_Triage_Mult4_Flr_1_MiscPlug_Equip, !- Name ER_Triage_Mult4_Flr_1, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 599.9803, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Office1_Mult4_Flr_1_MiscPlug_Equip, !- Name Office1_Mult4_Flr_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 164.9958, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Lobby_Records_Flr_1_MiscPlug_Equip, !- Name Lobby_Records_Flr_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1592.7955, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, ER_NurseStn_Lobby_Flr_1_MiscPlug_Equip, !- Name ER_NurseStn_Lobby_Flr_1, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 18076.9806, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, OR1_Flr_2_MiscPlug_Equip,!- Name OR1_Flr_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 2399.1281, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, OR2_Mult5_Flr_2_MiscPlug_Equip, !- Name OR2_Mult5_Flr_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 2399.1281, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, OR3_Flr_2_MiscPlug_Equip,!- Name OR3_Flr_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 2399.1281, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, OR4_Flr_2_MiscPlug_Equip,!- Name OR4_Flr_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 9596.5124, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, IC_PatRoom1_Mult5_Flr_2_MiscPlug_Equip, !- Name IC_PatRoom1_Mult5_Flr_2, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 674.7548, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, IC_PatRoom2_Flr_2_MiscPlug_Equip, !- Name IC_PatRoom2_Flr_2, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 899.6730, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, IC_PatRoom3_Mult6_Flr_2_MiscPlug_Equip, !- Name IC_PatRoom3_Mult6_Flr_2, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 674.7548, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, ICU_Flr_2_MiscPlug_Equip,!- Name ICU_Flr_2, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 19947.8932, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, ICU_NurseStn_Lobby_Flr_2_MiscPlug_Equip, !- Name ICU_NurseStn_Lobby_Flr_2,!- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 14391.8825, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, OR_NurseStn_Lobby_Flr_2_MiscPlug_Equip, !- Name OR_NurseStn_Lobby_Flr_2, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 11331.4767, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, PatRoom1_Mult10_Flr_3_MiscPlug_Equip, !- Name PatRoom1_Mult10_Flr_3, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 449.8365, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, PatRoom2_Flr_3_MiscPlug_Equip, !- Name PatRoom2_Flr_3, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 749.7275, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, PatRoom3_Mult10_Flr_3_MiscPlug_Equip, !- Name PatRoom3_Mult10_Flr_3, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 434.8813, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, PatRoom4_Flr_3_MiscPlug_Equip, !- Name PatRoom4_Flr_3, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 749.7275, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, PatRoom5_Mult10_Flr_3_MiscPlug_Equip, !- Name PatRoom5_Mult10_Flr_3, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 449.8365, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, PhysTherapy_Flr_3_MiscPlug_Equip, !- Name PhysTherapy_Flr_3, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 7872.1391, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, PatRoom6_Flr_3_MiscPlug_Equip, !- Name PatRoom6_Flr_3, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 599.7820, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, PatRoom7_Mult10_Flr_3_MiscPlug_Equip, !- Name PatRoom7_Mult10_Flr_3, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 434.8813, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, PatRoom8_Flr_3_MiscPlug_Equip, !- Name PatRoom8_Flr_3, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 599.7820, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, NurseStn_Lobby_Flr_3_MiscPlug_Equip, !- Name NurseStn_Lobby_Flr_3, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 10135.9539, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Lab_Flr_3_MiscPlug_Equip,!- Name Lab_Flr_3, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 11395.8585, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, PatRoom1_Mult10_Flr_4_MiscPlug_Equip, !- Name PatRoom1_Mult10_Flr_4, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 449.8365, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, PatRoom2_Flr_4_MiscPlug_Equip, !- Name PatRoom2_Flr_4, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 749.7275, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, PatRoom3_Mult10_Flr_4_MiscPlug_Equip, !- Name PatRoom3_Mult10_Flr_4, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 434.8813, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, PatRoom4_Flr_4_MiscPlug_Equip, !- Name PatRoom4_Flr_4, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 749.7275, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, PatRoom5_Mult10_Flr_4_MiscPlug_Equip, !- Name PatRoom5_Mult10_Flr_4, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 449.8365, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Radiology_Flr_4_MiscPlug_Equip, !- Name Radiology_Flr_4, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 52499.8946, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, PatRoom6_Flr_4_MiscPlug_Equip, !- Name PatRoom6_Flr_4, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 599.7820, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, PatRoom7_Mult10_Flr_4_MiscPlug_Equip, !- Name PatRoom7_Mult10_Flr_4, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 434.8813, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, PatRoom8_Flr_4_MiscPlug_Equip, !- Name PatRoom8_Flr_4, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 599.7820, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, NurseStn_Lobby_Flr_4_MiscPlug_Equip, !- Name NurseStn_Lobby_Flr_4, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 10135.9539, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Lab_Flr_4_MiscPlug_Equip,!- Name Lab_Flr_4, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 11395.8585, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Dining_Flr_5_MiscPlug_Equip, !- Name Dining_Flr_5, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 7497.2753, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, NurseStn_Lobby_Flr_5_MiscPlug_Equip, !- Name NurseStn_Lobby_Flr_5, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 11643.3522, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Kitchen_Flr_5_MiscPlug_Equip, !- Name Kitchen_Flr_5, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 74972.7533, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost Cooking; !- End-Use Subcategory ElectricEquipment, Office1_Flr_5_MiscPlug_Equip, !- Name Office1_Flr_5, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 749.9243, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Office2_Mult5_Flr_5_MiscPlug_Equip, !- Name Office2_Mult5_Flr_5, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 749.7275, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Office3_Flr_5_MiscPlug_Equip, !- Name Office3_Flr_5, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 749.7275, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Office4_Mult6_Flr_5_MiscPlug_Equip, !- Name Office4_Mult6_Flr_5, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 149.9455, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory Exterior:FuelEquipment, Elevators, !- Name Electricity, !- Fuel Use Type BLDG_ELEVATORS, !- Schedule Name 162962.637362637, !- Design Level {W} ElevatorLift; !- End-Use Subcategory Exterior:FuelEquipment, Elevators_Lights_Fan, !- Name Electricity, !- Fuel Use Type ELEV_LIGHT_FAN_SCH_ADD_DF, !- Schedule Name 501, !- Design Level {W} ElevatorLightsFan; !- End-Use Subcategory ElectricEquipment, Kitchen_Flr_5_Reach-in-Freezer, !- Name Kitchen_Flr_5, !- Zone or ZoneList Name Always_on, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 555, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.2500, !- Fraction Radiant 0.0000, !- Fraction Lost ReachInFreezer; !- End-Use Subcategory ElectricEquipment, Kitchen_Flr_5_Reach-in-Refrigerator, !- Name Kitchen_Flr_5, !- Zone or ZoneList Name Always_on, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 470, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.2500, !- Fraction Radiant 0.0000, !- Fraction Lost ReachInRefrigerator; !- End-Use Subcategory !- =========== ALL OBJECTS IN CLASS: GAS EQUIPMENT =========== GasEquipment, Kitchen_Flr_5_MiscPlugGas_Equip, !- Name Kitchen_Flr_5, !- Zone or ZoneList Name BLDG_EQUIP_EXTD_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 149945.5066, !- Design Level {W} , !- Power per Zone Floor Area {W/m2} , !- Power per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost , !- Carbon Dioxide Generation Rate {m3/s-W} Cooking; !- End-Use Subcategory !- =========== ALL OBJECTS IN CLASS: EXTERIORLIGHTS =========== Exterior:Lights, Exterior_Lights, !- Name Exterior_Lgt_ALWAYS_ON, !- Schedule Name 9863, !- Design Level {W} AstronomicalClock, !- Control Option General; !- End-Use Subcategory !- =========== ALL OBJECTS IN CLASS: DAYLIGHTING:CONTROLS =========== Daylighting:Controls, Office1_Flr_5_DaylCtrl, !- Name Office1_Flr_5, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Office1_Flr_5_DaylRefPt1,!- Glare Calculation Daylighting Reference Point Name 270.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Office1_Flr_5_DaylRefPt1,!- Daylighting Reference Point 1 Name 0.56, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Office1_Flr_5_DaylRefPt2,!- Daylighting Reference Point 2 Name 0.21, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Office1_Flr_5_DaylRefPt1,!- Name Office1_Flr_5, !- Zone Name 6.096000, !- X-Coordinate of Reference Point {m} 2.859000, !- Y-Coordinate of Reference Point {m} 17.835200; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Office1_Flr_5_DaylRefPt2,!- Name Office1_Flr_5, !- Zone Name 2.859000, !- X-Coordinate of Reference Point {m} 5.183600, !- Y-Coordinate of Reference Point {m} 17.835200; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Office3_Flr_5_DaylCtrl, !- Name Office3_Flr_5, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Office3_Flr_5_DaylRefPt1,!- Glare Calculation Daylighting Reference Point Name 0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Office3_Flr_5_DaylRefPt1,!- Daylighting Reference Point 1 Name 0.56, !- Fraction of Zone Controlled by Reference Point 1 377.0, !- Illuminance Setpoint at Reference Point 1 {lux} Office3_Flr_5_DaylRefPt2,!- Daylighting Reference Point 2 Name 0.21, !- Fraction of Zone Controlled by Reference Point 2 377.0; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Office3_Flr_5_DaylRefPt1,!- Name Office3_Flr_5, !- Zone Name 6.096000, !- X-Coordinate of Reference Point {m} 50.481000, !- Y-Coordinate of Reference Point {m} 17.835200; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Office3_Flr_5_DaylRefPt2,!- Name Office3_Flr_5, !- Zone Name 2.859000, !- X-Coordinate of Reference Point {m} 48.158400, !- Y-Coordinate of Reference Point {m} 17.835200; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Lobby_Records_Flr_1_DaylCtrl, !- Name Lobby_Records_Flr_1, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Lobby_Records_Flr_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 270.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Lobby_Records_Flr_1_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.15, !- Fraction of Zone Controlled by Reference Point 1 269; !- Illuminance Setpoint at Reference Point 1 {lux} Daylighting:ReferencePoint, Lobby_Records_Flr_1_DaylRefPt1, !- Name Lobby_Records_Flr_1, !- Zone Name 2.859000, !- X-Coordinate of Reference Point {m} 26.670000, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Office4_Mult6_Flr_5_DaylCtrl, !- Name Office4_Mult6_Flr_5, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Office4_Mult6_Flr_5_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Office4_Mult6_Flr_5_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.94, !- Fraction of Zone Controlled by Reference Point 1 377.0; !- Illuminance Setpoint at Reference Point 1 {lux} Daylighting:ReferencePoint, Office4_Mult6_Flr_5_DaylRefPt1, !- Name Office4_Mult6_Flr_5, !- Zone Name 10.668000, !- X-Coordinate of Reference Point {m} 50.481000, !- Y-Coordinate of Reference Point {m} 17.835200; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Office2_Mult5_Flr_5_DaylCtrl, !- Name Office2_Mult5_Flr_5, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Office2_Mult5_Flr_5_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Office2_Mult5_Flr_5_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.47, !- Fraction of Zone Controlled by Reference Point 1 377.0; !- Illuminance Setpoint at Reference Point 1 {lux} Daylighting:ReferencePoint, Office2_Mult5_Flr_5_DaylRefPt1, !- Name Office2_Mult5_Flr_5, !- Zone Name 2.859000, !- X-Coordinate of Reference Point {m} 11.430000, !- Y-Coordinate of Reference Point {m} 17.835200; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Dining_Flr_5_DaylCtrl, !- Name Dining_Flr_5, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Dining_Flr_5_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Dining_Flr_5_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.19, !- Fraction of Zone Controlled by Reference Point 1 215.0; !- Illuminance Setpoint at Reference Point 1 {lux} Daylighting:ReferencePoint, Dining_Flr_5_DaylRefPt1, !- Name Dining_Flr_5, !- Zone Name 54.864000, !- X-Coordinate of Reference Point {m} 2.859024, !- Y-Coordinate of Reference Point {m} 17.835200; !- Z-Coordinate of Reference Point {m} !- =========== ALL OBJECTS IN CLASS: INFILTRATION =========== ZoneInfiltration:DesignFlowRate, Basement_Infiltration, !- Name Basement, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, ER_Exam1_Mult4_Flr_1_Infiltration, !- Name ER_Exam1_Mult4_Flr_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, ER_Trauma1_Flr_1_Infiltration, !- Name ER_Trauma1_Flr_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, ER_Exam3_Mult4_Flr_1_Infiltration, !- Name ER_Exam3_Mult4_Flr_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, ER_Trauma2_Flr_1_Infiltration, !- Name ER_Trauma2_Flr_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.224, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, ER_Triage_Mult4_Flr_1_Infiltration, !- Name ER_Triage_Mult4_Flr_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Office1_Mult4_Flr_1_Infiltration, !- Name Office1_Mult4_Flr_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Lobby_Records_Flr_1_Infiltration, !- Name Lobby_Records_Flr_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Corridor_Flr_1_Infiltration, !- Name Corridor_Flr_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, ER_NurseStn_Lobby_Flr_1_Infiltration, !- Name ER_NurseStn_Lobby_Flr_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, OR1_Flr_2_Infiltration, !- Name OR1_Flr_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, OR2_Mult5_Flr_2_Infiltration, !- Name OR2_Mult5_Flr_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, OR3_Flr_2_Infiltration, !- Name OR3_Flr_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, OR4_Flr_2_Infiltration, !- Name OR4_Flr_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, IC_PatRoom1_Mult5_Flr_2_Infiltration, !- Name IC_PatRoom1_Mult5_Flr_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, IC_PatRoom2_Flr_2_Infiltration, !- Name IC_PatRoom2_Flr_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, IC_PatRoom3_Mult6_Flr_2_Infiltration, !- Name IC_PatRoom3_Mult6_Flr_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, ICU_Flr_2_Infiltration, !- Name ICU_Flr_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, ICU_NurseStn_Lobby_Flr_2_Infiltration, !- Name ICU_NurseStn_Lobby_Flr_2,!- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Corridor_Flr_2_Infiltration, !- Name Corridor_Flr_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, OR_NurseStn_Lobby_Flr_2_Infiltration, !- Name OR_NurseStn_Lobby_Flr_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, PatRoom1_Mult10_Flr_3_Infiltration, !- Name PatRoom1_Mult10_Flr_3, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, PatRoom2_Flr_3_Infiltration, !- Name PatRoom2_Flr_3, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, PatRoom3_Mult10_Flr_3_Infiltration, !- Name PatRoom3_Mult10_Flr_3, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, PatRoom4_Flr_3_Infiltration, !- Name PatRoom4_Flr_3, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, PatRoom5_Mult10_Flr_3_Infiltration, !- Name PatRoom5_Mult10_Flr_3, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, PhysTherapy_Flr_3_Infiltration, !- Name PhysTherapy_Flr_3, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, PatRoom6_Flr_3_Infiltration, !- Name PatRoom6_Flr_3, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, PatRoom7_Mult10_Flr_3_Infiltration, !- Name PatRoom7_Mult10_Flr_3, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, PatRoom8_Flr_3_Infiltration, !- Name PatRoom8_Flr_3, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, NurseStn_Lobby_Flr_3_Infiltration, !- Name NurseStn_Lobby_Flr_3, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Lab_Flr_3_Infiltration, !- Name Lab_Flr_3, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Corridor_SE_Flr_3_Infiltration, !- Name Corridor_SE_Flr_3, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Corridor_NW_Flr_3_Infiltration, !- Name Corridor_NW_Flr_3, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, PatRoom1_Mult10_Flr_4_Infiltration, !- Name PatRoom1_Mult10_Flr_4, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, PatRoom2_Flr_4_Infiltration, !- Name PatRoom2_Flr_4, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, PatRoom3_Mult10_Flr_4_Infiltration, !- Name PatRoom3_Mult10_Flr_4, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, PatRoom4_Flr_4_Infiltration, !- Name PatRoom4_Flr_4, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, PatRoom5_Mult10_Flr_4_Infiltration, !- Name PatRoom5_Mult10_Flr_4, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Radiology_Flr_4_Infiltration, !- Name Radiology_Flr_4, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, PatRoom6_Flr_4_Infiltration, !- Name PatRoom6_Flr_4, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, PatRoom7_Mult10_Flr_4_Infiltration, !- Name PatRoom7_Mult10_Flr_4, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, PatRoom8_Flr_4_Infiltration, !- Name PatRoom8_Flr_4, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, NurseStn_Lobby_Flr_4_Infiltration, !- Name NurseStn_Lobby_Flr_4, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Lab_Flr_4_Infiltration, !- Name Lab_Flr_4, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Corridor_SE_Flr_4_Infiltration, !- Name Corridor_SE_Flr_4, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Corridor_NW_Flr_4_Infiltration, !- Name Corridor_NW_Flr_4, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Dining_Flr_5_Infiltration, !- Name Dining_Flr_5, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000140134848, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, NurseStn_Lobby_Flr_5_Infiltration, !- Name NurseStn_Lobby_Flr_5, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 5.1718464e-05, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Kitchen_Flr_5_Infiltration, !- Name Kitchen_Flr_5, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000124488448, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Office1_Flr_5_Infiltration, !- Name Office1_Flr_5, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000288235136, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Office2_Mult5_Flr_5_Infiltration, !- Name Office2_Mult5_Flr_5, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000181043072, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Office3_Flr_5_Infiltration, !- Name Office3_Flr_5, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000288235136, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Office4_Mult6_Flr_5_Infiltration, !- Name Office4_Mult6_Flr_5, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000274636992, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Corridor_Flr_5_Infiltration, !- Name Corridor_Flr_5, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 7.6582016e-05, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient !- =========== ALL OBJECTS IN CLASS: SIZING PARAMETERS =========== Sizing:Parameters, 1.0, !- Heating Sizing Factor 1.0, !- Cooling Sizing Factor 6; !- Timesteps in Averaging Window !- =========== ALL OBJECTS IN CLASS: ZONE SIZING =========== Sizing:Zone, Basement, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Basement, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Basement, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000368277, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, ER_Exam1_Mult4_Flr_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA ER_Exam1_Mult4_Flr_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.01422212, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA ER_Exam1_Mult4_Flr_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370219, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, ER_Trauma1_Flr_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA ER_Trauma1_Flr_1,!- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.01422212, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA ER_Trauma1_Flr_1,!- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370219, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, ER_Exam3_Mult4_Flr_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA ER_Exam3_Mult4_Flr_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.01422212, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA ER_Exam3_Mult4_Flr_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370219, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, ER_Trauma2_Flr_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA ER_Trauma2_Flr_1,!- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.01422212, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA ER_Trauma2_Flr_1,!- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370219, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, ER_Triage_Mult4_Flr_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA ER_Triage_Mult4_Flr_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.01422212, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA ER_Triage_Mult4_Flr_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370219, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Office1_Mult4_Flr_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Office1_Mult4_Flr_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Office1_Mult4_Flr_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00048257, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Lobby_Records_Flr_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Lobby_Records_Flr_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Lobby_Records_Flr_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000338645, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Corridor_Flr_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corridor_Flr_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corridor_Flr_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000304781, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, ER_NurseStn_Lobby_Flr_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA ER_NurseStn_Lobby_Flr_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA ER_NurseStn_Lobby_Flr_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000338645, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, OR1_Flr_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA OR1_Flr_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.017776903, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA OR1_Flr_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.003555179, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, OR2_Mult5_Flr_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA OR2_Mult5_Flr_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.017776903, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA OR2_Mult5_Flr_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.003555179, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, OR3_Flr_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA OR3_Flr_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.017776903, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA OR3_Flr_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.003555179, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, OR4_Flr_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA OR4_Flr_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.017776903, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA OR4_Flr_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.003555179, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, IC_PatRoom1_Mult5_Flr_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA IC_PatRoom1_Mult5_Flr_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.007111113, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA IC_PatRoom1_Mult5_Flr_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370237, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, IC_PatRoom2_Flr_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA IC_PatRoom2_Flr_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.007111113, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA IC_PatRoom2_Flr_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370237, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, IC_PatRoom3_Mult6_Flr_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA IC_PatRoom3_Mult6_Flr_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.007111113, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA IC_PatRoom3_Mult6_Flr_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370237, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, ICU_Flr_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA ICU_Flr_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.007111113, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA ICU_Flr_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370237, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, ICU_NurseStn_Lobby_Flr_2,!- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA ICU_NurseStn_Lobby_Flr_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA ICU_NurseStn_Lobby_Flr_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000338645, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Corridor_Flr_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corridor_Flr_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corridor_Flr_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000304781, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, OR_NurseStn_Lobby_Flr_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA OR_NurseStn_Lobby_Flr_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA OR_NurseStn_Lobby_Flr_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000338645, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, PatRoom1_Mult10_Flr_3, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA PatRoom1_Mult10_Flr_3, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.007111113, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA PatRoom1_Mult10_Flr_3, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370237, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, PatRoom2_Flr_3, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA PatRoom2_Flr_3, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.007111113, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA PatRoom2_Flr_3, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370237, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, PatRoom3_Mult10_Flr_3, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA PatRoom3_Mult10_Flr_3, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.007111113, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA PatRoom3_Mult10_Flr_3, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370237, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, PatRoom4_Flr_3, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA PatRoom4_Flr_3, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.007111113, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA PatRoom4_Flr_3, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370237, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, PatRoom5_Mult10_Flr_3, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA PatRoom5_Mult10_Flr_3, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.007111113, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA PatRoom5_Mult10_Flr_3, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370237, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, PhysTherapy_Flr_3, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA PhysTherapy_Flr_3, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA PhysTherapy_Flr_3, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000380976, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, PatRoom6_Flr_3, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA PatRoom6_Flr_3, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.007111113, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA PatRoom6_Flr_3, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370237, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, PatRoom7_Mult10_Flr_3, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA PatRoom7_Mult10_Flr_3, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.007111113, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA PatRoom7_Mult10_Flr_3, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370237, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, PatRoom8_Flr_3, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA PatRoom8_Flr_3, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.007111113, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA PatRoom8_Flr_3, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370237, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, NurseStn_Lobby_Flr_3, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA NurseStn_Lobby_Flr_3, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA NurseStn_Lobby_Flr_3, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000338645, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Lab_Flr_3, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Lab_Flr_3, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA Lab_Flr_3, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.001168327, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Corridor_SE_Flr_3, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corridor_SE_Flr_3, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corridor_SE_Flr_3, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000304781, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Corridor_NW_Flr_3, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corridor_NW_Flr_3, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corridor_NW_Flr_3, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000304781, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, PatRoom1_Mult10_Flr_4, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA PatRoom1_Mult10_Flr_4, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.007111113, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA PatRoom1_Mult10_Flr_4, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370237, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, PatRoom2_Flr_4, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA PatRoom2_Flr_4, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.007111113, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA PatRoom2_Flr_4, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370237, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, PatRoom3_Mult10_Flr_4, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA PatRoom3_Mult10_Flr_4, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.007111113, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA PatRoom3_Mult10_Flr_4, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370237, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, PatRoom4_Flr_4, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA PatRoom4_Flr_4, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.007111113, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA PatRoom4_Flr_4, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370237, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, PatRoom5_Mult10_Flr_4, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA PatRoom5_Mult10_Flr_4, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.007111113, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA PatRoom5_Mult10_Flr_4, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370237, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Radiology_Flr_4, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Radiology_Flr_4, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Radiology_Flr_4, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000380976,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, PatRoom6_Flr_4, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA PatRoom6_Flr_4, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.007111113, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA PatRoom6_Flr_4, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370237, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, PatRoom7_Mult10_Flr_4, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA PatRoom7_Mult10_Flr_4, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.007111113, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA PatRoom7_Mult10_Flr_4, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370237, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, PatRoom8_Flr_4, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA PatRoom8_Flr_4, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} 0.007111113, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA PatRoom8_Flr_4, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.002370237, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, NurseStn_Lobby_Flr_4, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA NurseStn_Lobby_Flr_4, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA NurseStn_Lobby_Flr_4, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000338645, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Lab_Flr_4, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Lab_Flr_4, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA Lab_Flr_4, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.001168327, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Corridor_SE_Flr_4, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corridor_SE_Flr_4, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corridor_SE_Flr_4, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000304781, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Corridor_NW_Flr_4, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corridor_NW_Flr_4, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corridor_NW_Flr_4, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000304781, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Dining_Flr_5, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Dining_Flr_5, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Dining_Flr_5, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.001295319, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, NurseStn_Lobby_Flr_5, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA NurseStn_Lobby_Flr_5, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA NurseStn_Lobby_Flr_5, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000338645, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Kitchen_Flr_5, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Kitchen_Flr_5, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 1.88354224873518, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA Kitchen_Flr_5, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00202742887606986, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Office1_Flr_5, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Office1_Flr_5, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Office1_Flr_5, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00048257, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Office2_Mult5_Flr_5, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Office2_Mult5_Flr_5, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Office2_Mult5_Flr_5, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00048257, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Office3_Flr_5, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Office3_Flr_5, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Office3_Flr_5, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00048257, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Office4_Mult6_Flr_5, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Office4_Mult6_Flr_5, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Office4_Mult6_Flr_5, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00048257, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Corridor_Flr_5, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corridor_Flr_5, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corridor_Flr_5, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000304781, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} DesignSpecification:ZoneAirDistribution, VAV_Zone_AirDistribution, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} , !- Zone Air Distribution Effectiveness Schedule Name , !- Zone Secondary Recirculation Fraction {dimensionless} 0.6; !- Minimum Zone Ventilation Efficiency {dimensionless} !- =========== ALL OBJECTS IN CLASS: SIZING:SYSTEM =========== Sizing:System, VAV_1, !- AirLoop Name Sensible, !- Type of Load to Size On 4.3265, !- Design Outdoor Air Flow Rate {m3/s} 0.3000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 12.8000, !- Central Heating Design Supply Air Temperature {C} Coincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum; !- System Outdoor Air Method Sizing:System, VAV_ER, !- AirLoop Name Sensible, !- Type of Load to Size On AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} 1.0000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8, !- Central Cooling Design Supply Air Temperature {C} 12.8, !- Central Heating Design Supply Air Temperature {C} NonCoincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum; !- System Outdoor Air Method Sizing:System, VAV_OR, !- AirLoop Name Sensible, !- Type of Load to Size On AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} 1.000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8, !- Central Cooling Design Supply Air Temperature {C} 12.8, !- Central Heating Design Supply Air Temperature {C} NonCoincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum; !- System Outdoor Air Method Sizing:System, VAV_ICU, !- AirLoop Name Sensible, !- Type of Load to Size On AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} 1.0000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8, !- Central Cooling Design Supply Air Temperature {C} 12.8, !- Central Heating Design Supply Air Temperature {C} NonCoincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum; !- System Outdoor Air Method Sizing:System, VAV_PATRMS, !- AirLoop Name Sensible, !- Type of Load to Size On AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} 0.5, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8, !- Central Cooling Design Supply Air Temperature {C} 12.8, !- Central Heating Design Supply Air Temperature {C} NonCoincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum; !- System Outdoor Air Method Sizing:System, VAV_2, !- AirLoop Name Sensible, !- Type of Load to Size On 4.4794, !- Design Outdoor Air Flow Rate {m3/s} 0.3000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 12.8000, !- Central Heating Design Supply Air Temperature {C} Coincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum; !- System Outdoor Air Method Sizing:System, VAV_LABS, !- AirLoop Name Sensible, !- Type of Load to Size On AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} 1.0000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8, !- Central Cooling Design Supply Air Temperature {C} 12.8, !- Central Heating Design Supply Air Temperature {C} NonCoincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum; !- System Outdoor Air Method Sizing:System, CAV_KITCHEN, !- AirLoop Name Sensible, !- Type of Load to Size On AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} 1.0000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8, !- Central Cooling Design Supply Air Temperature {C} 12.8, !- Central Heating Design Supply Air Temperature {C} NonCoincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum; !- System Outdoor Air Method !- =========== ALL OBJECTS IN CLASS: PLANT SIZING =========== Sizing:Plant, SHWSys1, !- Plant or Condenser Loop Name Heating, !- Loop Type 60, !- Design Loop Exit Temperature {C} 5.0; !- Loop Design Temperature Difference {deltaC} Sizing:Plant, HeatSys1, !- Plant or Condenser Loop Name Heating, !- Loop Type 48.89, !- Design Loop Exit Temperature {C} 13.89; !- Loop Design Temperature Difference {deltaC} Sizing:Plant, CoolSys1_Supply, !- Plant or Condenser Loop Name Cooling, !- Loop Type 7.22, !- Design Loop Exit Temperature {C} 8.33; !- Loop Design Temperature Difference {deltaC} Sizing:Plant, CoolSys1_Demand, !- Plant or Condenser Loop Name Cooling, !- Loop Type 7.22, !- Design Loop Exit Temperature {C} 8.33; !- Loop Design Temperature Difference {deltaC} !- Design Loop Exit Temperature: Per 90.1-2010 G3.1.3.13, condenser water design supply temperature shall be !- 85F or 10F approaching design wet-bulb temperature, whichever is lower, with a design temperature rise of 10F (range temperature). !- Loop Design Temperature Difference: Per 90.1-2010 G3.1.3.13, design temperature rise of 10F (range temperature). !- Sizing Option: new inputs after V8.3. We choose coincident to be aligned with system sizing. Default (leaving blank) is noncoincident. !- Zone Timesteps in Averaging Window: alignment with system inputs for Timesteps in Averaging Window. !- Coincident Sizing Factor Mode: GlobalCoolingSizingFactor aligns with the system level sizing parameter inputs. Sizing:Plant, TowerWaterSys, !- Plant or Condenser Loop Name Condenser, !- Loop Type 29.4444444444444, !- Design Loop Exit Temperature {C} 5.55555555555556, !- Loop Design Temperature Difference {deltaC} Coincident, !- Sizing Option 6, !- Zone Timesteps in Averaging Window GlobalCoolingSizingFactor; !- Coincident Sizing Factor Mode Sizing:Plant, Heat Recovery Water Loop,!- Plant or Condenser Loop Name Heating, !- Loop Type 48.89, !- Design Loop Exit Temperature {C} 13.89; !- Loop Design Temperature Difference {deltaC}"; Sizing:Plant, Heat Recovery Chiller Bypass Loop, !- Plant or Condenser Loop Name Cooling, !- Loop Type 7.22, !- Design Loop Exit Temperature {C} 8.33; !- Loop Design Temperature Difference {deltaC} !- =========== ALL OBJECTS IN CLASS: ZONECONTROL:HUMIDISTAT =========== ZoneControl:Humidistat, ER_Exam3_Mult4_Flr_1 Humidistat, !- Name ER_Exam3_Mult4_Flr_1, !- Zone Name MinRelHumSetSch_addDI, !- Humidifying Relative Humidity Setpoint Schedule Name MaxRelHumSetSch; !- Dehumidifying Relative Humidity Setpoint Schedule Name ZoneControl:Humidistat, OR2_Mult5_Flr_2 Humidistat, !- Name OR2_Mult5_Flr_2, !- Zone Name MinRelHumSetSch_addDI, !- Humidifying Relative Humidity Setpoint Schedule Name MaxRelHumSetSch; !- Dehumidifying Relative Humidity Setpoint Schedule Name ZoneControl:Humidistat, ICU_Flr_2 Humidistat, !- Name ICU_Flr_2, !- Zone Name MinRelHumSetSch_addDI_ICU, !- Humidifying Relative Humidity Setpoint Schedule Name MaxRelHumSetSch; !- Dehumidifying Relative Humidity Setpoint Schedule Name ZoneControl:Humidistat, Lab_Flr_3 Humidistat, !- Name Lab_Flr_3, !- Zone Name MinRelHumSetSch_addDI, !- Humidifying Relative Humidity Setpoint Schedule Name MaxRelHumSetSch; !- Dehumidifying Relative Humidity Setpoint Schedule Name ZoneControl:Humidistat, PatRoom5_Mult10_Flr_4 Humidistat, !- Name PatRoom5_Mult10_Flr_4, !- Zone Name MinRelHumSetSch_addDI, !- Humidifying Relative Humidity Setpoint Schedule Name MaxRelHumSetSch; !- Dehumidifying Relative Humidity Setpoint Schedule Name !- Set of chiller curves based on Dick Lord's study dated January 17, 2010... !- Hospital and Large Office have water cooled chillers...Hence set of water cooled chillers to be used in these prototypes... !- Large Office will follow 90.1-2010 Path B in the PI case whereas Hospital will follow Path A based on the discussion with the SWG !- Changed the min. chiller condenser fluid entering temperature to 64 F (17.78 deg C) for water cooled chillers based on Dick's email dated June 4, 2010 !- and 55 F (12.7 deg C) for air cooled chillers !- based on email string and energyplus support clarification dated June 1, 2010...also changed the upper limit for air cooled chillers to 125 F (51.67 deg C) !- and the water cooled chillers to 115 F (46.11 deg C) later the same day... ! Temporary changes to address Dick's wrong PLR curves. On Oct. 27, 2010 ! Water cooled chiller PLR curve comes from E+ data library "ReformEIRChiller Carrier 19FA 5651kW/5.50COP/Vanes EIRFPLR" ! Air-cooled chiller PLR comes from the original curve before addendum M. !- Water cooled chillers: Positive Displacement chillers... !- 90.1-2004 and 2007 Baseline curves... Curve:Biquadratic, WC_PD_2004_CAPFT, !- Name 0.9061150, !- Coefficient1 Constant 0.0292277, !- Coefficient2 x -0.0003647, !- Coefficient3 x**2 -0.0009709, !- Coefficient4 y -0.0000905, !- Coefficient5 y**2 0.0002527, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Biquadratic, WC_PD_2004_EIRFT, !- Name 0.3617105, !- Coefficient1 Constant -0.0229833, !- Coefficient2 x 0.0009519, !- Coefficient3 x**2 0.0131889, !- Coefficient4 y 0.0003752, !- Coefficient5 y**2 -0.0007059, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Bicubic, WC_PD_LT75_2004_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_PD_75TO150_2004_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_PD_150TO300_2004_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_PD_GT300_2004_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y !- 90.1-2010 Path A curves... Curve:Biquadratic, WC_PD_LT150_2010_PA_CAPFT, !- Name 0.9061150, !- Coefficient1 Constant 0.0292277, !- Coefficient2 x -0.0003647, !- Coefficient3 x**2 -0.0009709, !- Coefficient4 y -0.0000905, !- Coefficient5 y**2 0.0002527, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Biquadratic, WC_PD_LT150_2010_PA_EIRFT, !- Name 0.3617105, !- Coefficient1 Constant -0.0229833, !- Coefficient2 x 0.0009519, !- Coefficient3 x**2 0.0131889, !- Coefficient4 y 0.0003752, !- Coefficient5 y**2 -0.0007059, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Biquadratic, WC_PD_GT150_2010_PA_CAPFT, !- Name 0.9061150, !- Coefficient1 Constant 0.0292277, !- Coefficient2 x -0.0003647, !- Coefficient3 x**2 -0.0009709, !- Coefficient4 y -0.0000905, !- Coefficient5 y**2 0.0002527, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Biquadratic, WC_PD_GT150_2010_PA_EIRFT, !- Name 0.3773115, !- Coefficient1 Constant -0.0229032, !- Coefficient2 x 0.0016504, !- Coefficient3 x**2 0.0118156, !- Coefficient4 y 0.0004345, !- Coefficient5 y**2 -0.0010132, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Bicubic, WC_PD_LT75_2010_PA_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_PD_75TO150_2010_PA_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_PD_150TO300_2010_PA_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_PD_GT300_2010_PA_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y !- 90.1-2010 Path B curves.. Curve:Biquadratic, WC_PD_2010_PB_CAPFT, !- Name 0.9061171, !- Coefficient1 Constant 0.0292267, !- Coefficient2 x -0.0003665, !- Coefficient3 x**2 -0.0009698, !- Coefficient4 y -0.0000907, !- Coefficient5 y**2 0.0002535, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Biquadratic, WC_PD_2010_PB_EIRFT, !- Name 0.3617782, !- Coefficient1 Constant -0.0230016, !- Coefficient2 x 0.0009672, !- Coefficient3 x**2 0.0131801, !- Coefficient4 y 0.0003761, !- Coefficient5 y**2 -0.0007121, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Bicubic, WC_PD_LT75_2010_PB_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_PD_75TO150_2010_PB_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_PD_150TO300_2010_PB_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_PD_GT300_2010_PB_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y !- Water cooled chillers: Centrifugal Chillers... !- 90.1-2004 Baseline curves... Curve:Biquadratic, WC_Cent_LT150_2004_CAPFT, !- Name 0.7446451, !- Coefficient1 Constant 0.0114858, !- Coefficient2 x 0.0000148, !- Coefficient3 x**2 0.0224010, !- Coefficient4 y -0.0006880, !- Coefficient5 y**2 0.0009839, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Biquadratic, WC_Cent_LT150_2004_EIRFT, !- Name 0.7728770, !- Coefficient1 Constant 0.0221010, !- Coefficient2 x -0.0000799, !- Coefficient3 x**2 -0.0070045, !- Coefficient4 y 0.0004763, !- Coefficient5 y**2 -0.0010612, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Biquadratic, WC_Cent_GT150_2004_CAPFT, !- Name 0.7600172, !- Coefficient1 Constant 0.0147432, !- Coefficient2 x 0.0002144, !- Coefficient3 x**2 0.0207218, !- Coefficient4 y -0.0006425, !- Coefficient5 y**2 0.0008007, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Biquadratic, WC_Cent_GT150_2004_EIRFT, !- Name 0.6772577, !- Coefficient1 Constant 0.0117857, !- Coefficient2 x -0.0001967, !- Coefficient3 x**2 0.0014414, !- Coefficient4 y 0.0003005, !- Coefficient5 y**2 -0.0006807, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Bicubic, WC_Cent_LT150_2004_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_Cent_150TO300_2004_EIRFPLR,!- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_Cent_GT300_2004_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y !- 90.1-2010 Path A curves... Curve:Biquadratic, WC_Cent_2010_PA_CAPFT, !- Name 0.7600172, !- Coefficient1 Constant 0.0147432, !- Coefficient2 x 0.0002144, !- Coefficient3 x**2 0.0207218, !- Coefficient4 y -0.0006425, !- Coefficient5 y**2 0.0008007, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Biquadratic, WC_Cent_2010_PA_EIRFT, !- Name 0.6772577, !- Coefficient1 Constant 0.0117857, !- Coefficient2 x -0.0001967, !- Coefficient3 x**2 0.0014414, !- Coefficient4 y 0.0003005, !- Coefficient5 y**2 -0.0006807, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Bicubic, WC_Cent_LT150_2010_PA_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_Cent_150TO300_2010_PA_EIRFPLR,!- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_Cent_300TO600_2010_PA_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_Cent_GT600_2010_PA_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y !- 90.1-2010 Path B curves... Curve:Biquadratic, WC_Cent_2010_PB_CAPFT, !- Name 0.5362340, !- Coefficient1 Constant 0.005581, !- Coefficient2 x -0.0013654, !- Coefficient3 x**2 0.0488966, !- Coefficient4 y -0.0012018, !- Coefficient5 y**2 0.0010523, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Biquadratic, WC_Cent_2010_PB_EIRFT, !- Name 1.0821822, !- Coefficient1 Constant 0.0042977, !- Coefficient2 x -0.0013182, !- Coefficient3 x**2 -0.0260781, !- Coefficient4 y 0.0008256, !- Coefficient5 y**2 -0.0006013, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Bicubic, WC_Cent_LT150_2010_PB_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_Cent_150TO300_2010_PB_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_Cent_300TO600_2010_PB_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_Cent_GT600_2010_PB_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y !- Air cooled chillers... !- 90.1-2004 Baseline curves... Curve:Biquadratic, AC_2004_CAPFT, !- Name 1.0433811, !- Coefficient1 Constant 0.0407077, !- Coefficient2 x 0.0004506, !- Coefficient3 x**2 -0.0041514, !- Coefficient4 y -0.0000886, !- Coefficient5 y**2 -0.0003467, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 12.7, !- Minimum Value of y 51.67; !- Maximum Value of y Curve:Biquadratic, AC_2004_EIRFT, !- Name 0.5961915, !- Coefficient1 Constant -0.0099496, !- Coefficient2 x 0.0007888, !- Coefficient3 x**2 0.0004506, !- Coefficient4 y 0.0004875, !- Coefficient5 y**2 -0.0007623, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 12.7, !- Minimum Value of y 51.67; !- Maximum Value of y Curve:Quadratic, AC_LT150_2004_EIRFPLR, !- Name 0.1410, !- Coefficient1 Constant 0.6550, !- Coefficient2 x 0.2030, !- Coefficient3 x**2 0.0000, !- Minimum Value of x 1.0000; !- Maximum Value of x Curve:Quadratic, AC_GT150_2004_EIRFPLR, !- Name 0.1410, !- Coefficient1 Constant 0.6550, !- Coefficient2 x 0.2030, !- Coefficient3 x**2 0.0000, !- Minimum Value of x 1.0000; !- Maximum Value of x !- 90.1-2010 Path A curves... Curve:Biquadratic, AC_2010_PA_CAPFT, !- Name 1.0433825, !- Coefficient1 Constant 0.0407073, !- Coefficient2 x 0.0004506, !- Coefficient3 x**2 -0.0041514, !- Coefficient4 y -0.0000886, !- Coefficient5 y**2 -0.0003467, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 12.7, !- Minimum Value of y 51.67; !- Maximum Value of y Curve:Biquadratic, AC_2010_PA_EIRFT, !- Name 0.5961907, !- Coefficient1 Constant -0.0099493, !- Coefficient2 x 0.0007888, !- Coefficient3 x**2 0.0004506, !- Coefficient4 y 0.0004875, !- Coefficient5 y**2 -0.0007623, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 12.7, !- Minimum Value of y 51.67; !- Maximum Value of y Curve:Quadratic, AC_LT150_2010_PA_EIRFPLR, !- Name 0.1410, !- Coefficient1 Constant 0.6550, !- Coefficient2 x 0.2030, !- Coefficient3 x**2 0.0000, !- Minimum Value of x 1.0000; !- Maximum Value of x Curve:Quadratic, AC_GT150_2010_PA_EIRFPLR, !- Name 0.1410, !- Coefficient1 Constant 0.6550, !- Coefficient2 x 0.2030, !- Coefficient3 x**2 0.0000, !- Minimum Value of x 1.0000; !- Maximum Value of x !- =========== ALL OBJECTS IN CLASS: CURVE:BIQUADRATIC =========== !***** Following curve is from Dick Lord's Chiller Model study for ASHRAE 2007 baseline ***** Curve:Biquadratic, ChillerCentCapFT, !- Name 0.7446451, !- Coefficient1 Constant 0.0114858, !- Coefficient2 x 0.0000148, !- Coefficient3 x**2 0.0224010, !- Coefficient4 y -0.0006880, !- Coefficient5 y**2 0.0009839, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 24.0000, !- Minimum Value of y 35.0000; !- Maximum Value of y !***** Following curve is from Dick Lord's Chiller Model study for ASHRAE 2007 baseline ***** Curve:Biquadratic, ChillerCentEIRFT, !- Name 0.7728770, !- Coefficient1 Constant 0.0221010, !- Coefficient2 x -0.0000799, !- Coefficient3 x**2 -0.0070045, !- Coefficient4 y 0.0004763, !- Coefficient5 y**2 -0.0010612, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 24.0000, !- Minimum Value of y 35.0000; !- Maximum Value of y !- =========== ALL OBJECTS IN CLASS: CURVE:BICUBIC =========== !***** Following curve is from Dick Lord's Chiller Model study for ASHRAE 2007 baseline ***** Curve:Bicubic, ChillerCentEIRPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y !- =========== ALL OBJECTS IN CLASS: CURVE:CUBIC =========== Curve:Cubic, Kitchen_Flr_5_Case:1_WALKINFREEZERSingleShelfHorizontal_LatentEnergyMult, !- Name 0.0236, !- Coefficient1 Constant 0.0006, !- Coefficient2 x 0.0000, !- Coefficient3 x**2 0.0000, !- Coefficient4 x**3 -35.0, !- Minimum Value of x 20.0; !- Maximum Value of x Curve:Cubic, Kitchen_Flr_5_Case:2_SELFCONTAINEDDISPLAYCASEMultiShelfVertical_LatentEnergyMult, !- Name 0.026526281, !- Coefficient1 Constant 0.001078032, !- Coefficient2 x 0.0000602558, !- Coefficient3 x**2 0.00000123732, !- Coefficient4 x**3 -35.0, !- Minimum Value of x 20.0; !- Maximum Value of x !- =========== ALL OBJECTS IN CLASS: CURVE:QUADRATIC =========== Curve:Quadratic, RACK1_RackCOPfTCurve, !- Name 1.7603, !- Coefficient1 Constant -0.0377, !- Coefficient2 x 0.0004, !- Coefficient3 x**2 10.0000, !- Minimum Value of x 35.0000; !- Maximum Value of x Curve:Quadratic, RACK1_RackCondFanCurve2, !- Name 0.0000, !- Coefficient1 Constant 0.0286, !- Coefficient2 x 0.0000, !- Coefficient3 x**2 0.0000, !- Minimum Value of x 35.0000; !- Maximum Value of x Curve:Quadratic, RACK2_RackCOPfTCurve, !- Name 1.0000, !- Coefficient1 Constant 0.0000, !- Coefficient2 x 0.0000, !- Coefficient3 x**2 0.0000, !- Minimum Value of x 50.0000; !- Maximum Value of x !- =========== ALL OBJECTS IN CLASS: NODELIST =========== NodeList, Basement Inlet Nodes, !- Name Basement VAV Box Outlet Node; !- Node 1 Name NodeList, ER_Exam1_Mult4_Flr_1 Inlet Nodes, !- Name ER_Exam1_Mult4_Flr_1 VAV Box Outlet Node; !- Node 1 Name NodeList, ER_Trauma1_Flr_1 Inlet Nodes, !- Name ER_Trauma1_Flr_1 VAV Box Outlet Node; !- Node 1 Name NodeList, ER_Exam3_Mult4_Flr_1 Inlet Nodes, !- Name ER_Exam3_Mult4_Flr_1 VAV Box Outlet Node; !- Node 1 Name NodeList, ER_Trauma2_Flr_1 Inlet Nodes, !- Name ER_Trauma2_Flr_1 VAV Box Outlet Node; !- Node 1 Name NodeList, ER_Triage_Mult4_Flr_1 Inlet Nodes, !- Name ER_Triage_Mult4_Flr_1 VAV Box Outlet Node; !- Node 1 Name NodeList, Office1_Mult4_Flr_1 Inlet Nodes, !- Name Office1_Mult4_Flr_1 VAV Box Outlet Node; !- Node 1 Name NodeList, Lobby_Records_Flr_1 Inlet Nodes, !- Name Lobby_Records_Flr_1 VAV Box Outlet Node; !- Node 1 Name NodeList, Corridor_Flr_1 Inlet Nodes, !- Name Corridor_Flr_1 VAV Box Outlet Node; !- Node 1 Name NodeList, ER_NurseStn_Lobby_Flr_1 Inlet Nodes, !- Name ER_NurseStn_Lobby_Flr_1 VAV Box Outlet Node; !- Node 1 Name NodeList, OR1_Flr_2 Inlet Nodes, !- Name OR1_Flr_2 VAV Box Outlet Node; !- Node 1 Name NodeList, OR2_Mult5_Flr_2 Inlet Nodes, !- Name OR2_Mult5_Flr_2 VAV Box Outlet Node; !- Node 1 Name NodeList, OR3_Flr_2 Inlet Nodes, !- Name OR3_Flr_2 VAV Box Outlet Node; !- Node 1 Name NodeList, OR4_Flr_2 Inlet Nodes, !- Name OR4_Flr_2 VAV Box Outlet Node; !- Node 1 Name NodeList, IC_PatRoom1_Mult5_Flr_2 Inlet Nodes, !- Name IC_PatRoom1_Mult5_Flr_2 VAV Box Outlet Node; !- Node 1 Name NodeList, IC_PatRoom2_Flr_2 Inlet Nodes, !- Name IC_PatRoom2_Flr_2 VAV Box Outlet Node; !- Node 1 Name NodeList, IC_PatRoom3_Mult6_Flr_2 Inlet Nodes, !- Name IC_PatRoom3_Mult6_Flr_2 VAV Box Outlet Node; !- Node 1 Name NodeList, ICU_Flr_2 Inlet Nodes, !- Name ICU_Flr_2 VAV Box Outlet Node; !- Node 1 Name NodeList, ICU_NurseStn_Lobby_Flr_2 Inlet Nodes, !- Name ICU_NurseStn_Lobby_Flr_2 VAV Box Outlet Node; !- Node 1 Name NodeList, Corridor_Flr_2 Inlet Nodes, !- Name Corridor_Flr_2 VAV Box Outlet Node; !- Node 1 Name NodeList, OR_NurseStn_Lobby_Flr_2 Inlet Nodes, !- Name OR_NurseStn_Lobby_Flr_2 VAV Box Outlet Node; !- Node 1 Name NodeList, PatRoom1_Mult10_Flr_3 Inlet Nodes, !- Name PatRoom1_Mult10_Flr_3 VAV Box Outlet Node; !- Node 1 Name NodeList, PatRoom2_Flr_3 Inlet Nodes, !- Name PatRoom2_Flr_3 VAV Box Outlet Node; !- Node 1 Name NodeList, PatRoom3_Mult10_Flr_3 Inlet Nodes, !- Name PatRoom3_Mult10_Flr_3 VAV Box Outlet Node; !- Node 1 Name NodeList, PatRoom4_Flr_3 Inlet Nodes, !- Name PatRoom4_Flr_3 VAV Box Outlet Node; !- Node 1 Name NodeList, PatRoom5_Mult10_Flr_3 Inlet Nodes, !- Name PatRoom5_Mult10_Flr_3 VAV Box Outlet Node; !- Node 1 Name NodeList, PhysTherapy_Flr_3 Inlet Nodes, !- Name PhysTherapy_Flr_3 VAV Box Outlet Node; !- Node 1 Name NodeList, PatRoom6_Flr_3 Inlet Nodes, !- Name PatRoom6_Flr_3 VAV Box Outlet Node; !- Node 1 Name NodeList, PatRoom7_Mult10_Flr_3 Inlet Nodes, !- Name PatRoom7_Mult10_Flr_3 VAV Box Outlet Node; !- Node 1 Name NodeList, PatRoom8_Flr_3 Inlet Nodes, !- Name PatRoom8_Flr_3 VAV Box Outlet Node; !- Node 1 Name NodeList, NurseStn_Lobby_Flr_3 Inlet Nodes, !- Name NurseStn_Lobby_Flr_3 VAV Box Outlet Node; !- Node 1 Name NodeList, Lab_Flr_3 Inlet Nodes, !- Name Lab_Flr_3 VAV Box Outlet Node; !- Node 1 Name NodeList, Corridor_SE_Flr_3 Inlet Nodes, !- Name Corridor_SE_Flr_3 VAV Box Outlet Node; !- Node 1 Name NodeList, Corridor_NW_Flr_3 Inlet Nodes, !- Name Corridor_NW_Flr_3 VAV Box Outlet Node; !- Node 1 Name NodeList, PatRoom1_Mult10_Flr_4 Inlet Nodes, !- Name PatRoom1_Mult10_Flr_4 VAV Box Outlet Node; !- Node 1 Name NodeList, PatRoom2_Flr_4 Inlet Nodes, !- Name PatRoom2_Flr_4 VAV Box Outlet Node; !- Node 1 Name NodeList, PatRoom3_Mult10_Flr_4 Inlet Nodes, !- Name PatRoom3_Mult10_Flr_4 VAV Box Outlet Node; !- Node 1 Name NodeList, PatRoom4_Flr_4 Inlet Nodes, !- Name PatRoom4_Flr_4 VAV Box Outlet Node; !- Node 1 Name NodeList, PatRoom5_Mult10_Flr_4 Inlet Nodes, !- Name PatRoom5_Mult10_Flr_4 VAV Box Outlet Node; !- Node 1 Name NodeList, Radiology_Flr_4 Inlet Nodes, !- Name Radiology_Flr_4 VAV Box Outlet Node; !- Node 1 Name NodeList, PatRoom6_Flr_4 Inlet Nodes, !- Name PatRoom6_Flr_4 VAV Box Outlet Node; !- Node 1 Name NodeList, PatRoom7_Mult10_Flr_4 Inlet Nodes, !- Name PatRoom7_Mult10_Flr_4 VAV Box Outlet Node; !- Node 1 Name NodeList, PatRoom8_Flr_4 Inlet Nodes, !- Name PatRoom8_Flr_4 VAV Box Outlet Node; !- Node 1 Name NodeList, NurseStn_Lobby_Flr_4 Inlet Nodes, !- Name NurseStn_Lobby_Flr_4 VAV Box Outlet Node; !- Node 1 Name NodeList, Lab_Flr_4 Inlet Nodes, !- Name Lab_Flr_4 VAV Box Outlet Node; !- Node 1 Name NodeList, Corridor_SE_Flr_4 Inlet Nodes, !- Name Corridor_SE_Flr_4 VAV Box Outlet Node; !- Node 1 Name NodeList, Corridor_NW_Flr_4 Inlet Nodes, !- Name Corridor_NW_Flr_4 VAV Box Outlet Node; !- Node 1 Name NodeList, Dining_Flr_5 Inlet Nodes,!- Name Dining_Flr_5 VAV Box Outlet Node; !- Node 1 Name NodeList, NurseStn_Lobby_Flr_5 Inlet Nodes, !- Name NurseStn_Lobby_Flr_5 VAV Box Outlet Node; !- Node 1 Name NodeList, Kitchen_Flr_5 Inlet Nodes, !- Name Kitchen_Flr_5 Inlet Node;!- Node 1 Name NodeList, Kitchen_Flr_5 Exhaust Nodes, !- Name Kitchen_Flr_5 Exhaust Fan Node; !- Node 1 Name NodeList, Office1_Flr_5 Inlet Nodes, !- Name Office1_Flr_5 VAV Box Outlet Node; !- Node 1 Name NodeList, Office2_Mult5_Flr_5 Inlet Nodes, !- Name Office2_Mult5_Flr_5 VAV Box Outlet Node; !- Node 1 Name NodeList, Office3_Flr_5 Inlet Nodes, !- Name Office3_Flr_5 VAV Box Outlet Node; !- Node 1 Name NodeList, Office4_Mult6_Flr_5 Inlet Nodes, !- Name Office4_Mult6_Flr_5 VAV Box Outlet Node; !- Node 1 Name NodeList, Corridor_Flr_5 Inlet Nodes, !- Name Corridor_Flr_5 VAV Box Outlet Node; !- Node 1 Name NodeList, VAV_1_OANode List, !- Name VAV_1_OAInlet Node; !- Node 1 Name NodeList, VAV_ER_OANode List, !- Name VAV_ER_OAInlet Node; !- Node 1 Name NodeList, VAV_OR_OANode List, !- Name VAV_OR_OAInlet Node; !- Node 1 Name NodeList, VAV_ICU_OANode List, !- Name VAV_ICU_OAInlet Node; !- Node 1 Name NodeList, VAV_PATRMS_OANode List, !- Name VAV_PATRMS_OAInlet Node; !- Node 1 Name NodeList, VAV_2_OANode List, !- Name VAV_2_OAInlet Node; !- Node 1 Name NodeList, VAV_LABS_OANode List, !- Name VAV_LABS_OAInlet Node; !- Node 1 Name NodeList, CAV_KITCHEN_OANode List, !- Name CAV_KITCHEN_OAInlet Node;!- Node 1 Name !- =========== ALL OBJECTS IN CLASS: BRANCHLIST =========== BranchList, VAV_1 Air Loop Branches, !- Name VAV_1 Air Loop Main Branch; !- Branch 1 Name BranchList, VAV_ER Air Loop Branches,!- Name VAV_ER Air Loop Main Branch; !- Branch 1 Name BranchList, VAV_OR Air Loop Branches,!- Name VAV_OR Air Loop Main Branch; !- Branch 1 Name BranchList, VAV_ICU Air Loop Branches, !- Name VAV_ICU Air Loop Main Branch; !- Branch 1 Name BranchList, VAV_PATRMS Air Loop Branches, !- Name VAV_PATRMS Air Loop Main Branch; !- Branch 1 Name BranchList, VAV_2 Air Loop Branches, !- Name VAV_2 Air Loop Main Branch; !- Branch 1 Name BranchList, VAV_LABS Air Loop Branches, !- Name VAV_LABS Air Loop Main Branch; !- Branch 1 Name BranchList, CAV_KITCHEN Air Loop Branches, !- Name CAV_KITCHEN Air Loop Main Branch; !- Branch 1 Name BranchList, SHWSys1 Supply Branches, !- Name SHWSys1 Supply Inlet Branch, !- Branch 1 Name SHWSys1 Supply Equipment Branch, !- Branch 2 Name SHWSys1 Supply Equipment Bypass Branch, !- Branch 3 Name SHWSys1 Supply Outlet Branch; !- Branch 4 Name BranchList, SHWSys1 Demand Branches, !- Name SHWSys1 Demand Inlet Branch, !- Branch 1 Name SHWSys1 Demand Load Branch 1, !- Branch 2 Name SHWSys1 Demand Load Branch 2, !- Branch 3 Name SHWSys1 Demand Load Branch 3, !- Branch 4 Name SHWSys1 Demand Load Branch 4, !- Branch 5 Name SHWSys1 Demand Load Branch 5, !- Branch 6 Name SHWSys1 Demand Load Branch 6, !- Branch 7 Name SHWSys1 Demand Load Branch 7, !- Branch 8 Name SHWSys1 Demand Load Branch 8, !- Branch 9 Name SHWSys1 Demand Load Branch 9, !- Branch 10 Name SHWSys1 Demand Load Branch 10, !- Branch 11 Name SHWSys1 Demand Load Branch 11, !- Branch 12 Name SHWSys1 Demand Load Branch 12, !- Branch 13 Name SHWSys1 Demand Load Branch 13, !- Branch 14 Name SHWSys1 Demand Load Branch 14, !- Branch 15 Name SHWSys1 Demand Load Branch 15, !- Branch 16 Name SHWSys1 Demand Load Branch 16, !- Branch 17 Name SHWSys1 Demand Load Branch 17, !- Branch 18 Name SHWSys1 Demand Load Branch 18, !- Branch 19 Name SHWSys1 Demand Load Branch 19, !- Branch 20 Name SHWSys1 Demand Load Branch 20, !- Branch 21 Name SHWSys1 Demand Load Branch 21, !- Branch 22 Name SHWSys1 Demand Load Branch 22, !- Branch 23 Name SHWSys1 Demand Load Branch 23, !- Branch 24 Name SHWSys1 Demand Load Branch 24, !- Branch 25 Name SHWSys1 Demand Load Branch 25, !- Branch 26 Name SHWSys1 Demand Load Branch 26, !- Branch 27 Name SHWSys1 Demand Load Branch 27, !- Branch 28 Name SHWSys1 Demand Load Branch 28, !- Branch 29 Name SHWSys1 Demand Load Branch 29, !- Branch 30 Name SHWSys1 Demand Load Branch 30, !- Branch 31 Name SHWSys1 Demand Bypass Branch, !- Branch 32 Name SHWSys1 Demand Outlet Branch; !- Branch 33 Name BranchList, HeatSys1 Supply Branches,!- Name HeatSys1 Supply Inlet Branch, !- Branch 1 Name HeatSys1 Supply Equipment Branch, !- Branch 2 Name HeatSys1 Supply Equipment Bypass Branch, !- Branch 3 Name HeatSys1 Supply Outlet Branch; !- Branch 4 Name BranchList, HeatSys1 Demand Branches,!- Name HeatSys1 Demand Inlet Branch, !- Branch 1 Name HeatSys1 Demand Load Branch 1, !- Branch 2 Name HeatSys1 Demand Load Branch 2, !- Branch 3 Name HeatSys1 Demand Load Branch 3, !- Branch 4 Name HeatSys1 Demand Load Branch 4, !- Branch 5 Name HeatSys1 Demand Load Branch 5, !- Branch 6 Name HeatSys1 Demand Load Branch 6, !- Branch 7 Name HeatSys1 Demand Load Branch 7, !- Branch 8 Name HeatSys1 Demand Load Branch 8, !- Branch 9 Name HeatSys1 Demand Load Branch 9, !- Branch 10 Name HeatSys1 Demand Load Branch 10, !- Branch 11 Name HeatSys1 Demand Load Branch 11, !- Branch 12 Name HeatSys1 Demand Load Branch 12, !- Branch 13 Name HeatSys1 Demand Load Branch 13, !- Branch 14 Name HeatSys1 Demand Load Branch 14, !- Branch 15 Name HeatSys1 Demand Load Branch 15, !- Branch 16 Name HeatSys1 Demand Load Branch 16, !- Branch 17 Name HeatSys1 Demand Load Branch 17, !- Branch 18 Name HeatSys1 Demand Load Branch 18, !- Branch 19 Name HeatSys1 Demand Load Branch 19, !- Branch 20 Name HeatSys1 Demand Load Branch 20, !- Branch 21 Name HeatSys1 Demand Load Branch 21, !- Branch 22 Name HeatSys1 Demand Load Branch 22, !- Branch 23 Name HeatSys1 Demand Load Branch 23, !- Branch 24 Name HeatSys1 Demand Load Branch 24, !- Branch 25 Name HeatSys1 Demand Load Branch 25, !- Branch 26 Name HeatSys1 Demand Load Branch 26, !- Branch 27 Name HeatSys1 Demand Load Branch 27, !- Branch 28 Name HeatSys1 Demand Load Branch 28, !- Branch 29 Name HeatSys1 Demand Load Branch 29, !- Branch 30 Name HeatSys1 Demand Load Branch 30, !- Branch 31 Name HeatSys1 Demand Load Branch 31, !- Branch 32 Name HeatSys1 Demand Load Branch 32, !- Branch 33 Name HeatSys1 Demand Load Branch 33, !- Branch 34 Name HeatSys1 Demand Load Branch 34, !- Branch 35 Name HeatSys1 Demand Load Branch 35, !- Branch 36 Name HeatSys1 Demand Load Branch 36, !- Branch 37 Name HeatSys1 Demand Load Branch 37, !- Branch 38 Name HeatSys1 Demand Load Branch 38, !- Branch 39 Name HeatSys1 Demand Load Branch 39, !- Branch 40 Name HeatSys1 Demand Load Branch 40, !- Branch 41 Name HeatSys1 Demand Load Branch 41, !- Branch 42 Name HeatSys1 Demand Load Branch 42, !- Branch 43 Name HeatSys1 Demand Load Branch 43, !- Branch 44 Name HeatSys1 Demand Load Branch 44, !- Branch 45 Name HeatSys1 Demand Load Branch 45, !- Branch 46 Name HeatSys1 Demand Load Branch 46, !- Branch 47 Name HeatSys1 Demand Load Branch 47, !- Branch 48 Name HeatSys1 Demand Load Branch 48, !- Branch 49 Name HeatSys1 Demand Load Branch 49, !- Branch 50 Name HeatSys1 Demand Load Branch 50, !- Branch 51 Name HeatSys1 Demand Load Branch 51, !- Branch 52 Name HeatSys1 Demand Load Branch 52, !- Branch 53 Name HeatSys1 Demand Load Branch 53, !- Branch 54 Name HeatSys1 Demand Load Branch 54, !- Branch 55 Name HeatSys1 Demand Load Branch 55, !- Branch 56 Name HeatSys1 Demand Load Branch 56, !- Branch 57 Name HeatSys1 Demand Load Branch 57, !- Branch 58 Name HeatSys1 Demand Load Branch 58, !- Branch 59 Name HeatSys1 Demand Load Branch 59, !- Branch 60 Name HeatSys1 Demand Load Branch 60, !- Branch 61 Name HeatSys1 Demand Load Branch 61, !- Branch 62 Name HeatSys1 Demand Load Branch 62, !- Branch 63 Name HeatSys1 Demand Load Branch 63, !- Branch 64 Name HeatSys1 Demand Load Branch 64, !- Branch 65 Name HeatSys1 Demand Load Branch 65, !- Branch 66 Name HeatSys1 Demand Load Branch 66, !- Branch 67 Name HeatSys1 Demand Load Branch 67, !- Branch 68 Name HeatSys1 Demand Bypass Branch, !- Branch 69 Name HeatSys1 Demand Outlet Branch; !- Branch 70 Name BranchList, CoolSys1 Supply Supply Side Branches,!- Name CoolSys1 Supply Inlet Branch, !- Branch 1 Name CoolSys1 Supply Equipment Branch 1, !- Branch 2 Name CoolSys1 Supply Equipment Branch 2, !- Branch 3 Name CoolSys1 Supply Equipment Bypass Branch, !- Branch 4 Name CoolSys1 Supply Outlet Branch; !- Branch 5 Name BranchList, CoolSys1 Demand Demand Side Branches,!- Name CoolSys1 Demand Inlet Branch, !- Branch 1 Name CoolSys1 Demand Load Branch 1, !- Branch 2 Name CoolSys1 Demand Load Branch 2, !- Branch 3 Name CoolSys1 Demand Load Branch 3, !- Branch 4 Name CoolSys1 Demand Load Branch 4, !- Branch 5 Name CoolSys1 Demand Load Branch 5, !- Branch 6 Name CoolSys1 Demand Load Branch 6, !- Branch 7 Name CoolSys1 Demand Load Branch 7, !- Branch 8 Name CoolSys1 Demand Load Branch 8, !- Branch 9 Name CoolSys1 Demand Outlet Branch; !- Branch 10 Name BranchList, TowerWaterSys Supply Branches, !- Name TowerWaterSys Supply Inlet Branch, !- Branch 1 Name TowerWaterSys Supply Equipment Branch 1, !- Branch 2 Name TowerWaterSys Supply Equipment Branch 2, !- Branch 3 Name TowerWaterSys Supply Equipment Bypass Branch, !- Branch 4 Name TowerWaterSys Supply Outlet Branch; !- Branch 5 Name BranchList, TowerWaterSys Demand Branches, !- Name TowerWaterSys Demand Inlet Branch, !- Branch 1 Name TowerWaterSys Demand Load Branch 1, !- Branch 2 Name TowerWaterSys Demand Load Branch 2, !- Branch 3 Name TowerWaterSys Demand Load Branch 3, !- Branch Name TowerWaterSys Demand Bypass Branch, !- Branch 4 Name TowerWaterSys Demand Outlet Branch; !- Branch 5 Name BranchList, CoolSys1 Supply Demand Side Branches, !- Name CoolSys1 Supply Demand Side Inlet Branch, !- Branch 1 Name CoolSys1 Heat Exchanger Supply Branch, !- Branch 2 Name CoolSys1 Supply Side Bypass, !- Branch 3 Name CoolSys1 Supply Demand Side Outlet Branch; !- Branch 4 Name BranchList, CoolSys1 Demand Supply Side Branches, !- Name CoolSys1 Demand Supply Side Inlet Branch, !- Branch 1 Name CoolSys1 Heat Exchanger Demand Branch, !- Branch 2 Name CoolSys1 Demand Side Bypass, !- Branch 3 Name CoolSys1 Demand Supply Side Outlet Branch; !- Branch 4 Name !- =========== ALL OBJECTS IN CLASS: CONNECTORLIST =========== ConnectorList, Heat Recovery Supply Side Connectors, !- Name Connector:Splitter, !- Connector 1 Object Type Heat Recovery Supply Splitter, !- Connector 1 Name Connector:Mixer, !- Connector 2 Object Type Heat Recovery Supply Mixer; !- Connector 2 Name ConnectorList, Heat Recovery Demand Side Connectors, !- Name Connector:Splitter, !- Connector 1 Object Type Heat Recovery Splitter, !- Connector 1 Name Connector:Mixer, !- Connector 2 Object Type Heat Recovery Mixer; !- Connector 2 Name ConnectorList, SHWSys1 Supply Connectors, !- Name Connector:Splitter, !- Connector 1 Object Type SHWSys1 Supply Splitter, !- Connector 1 Name Connector:Mixer, !- Connector 2 Object Type SHWSys1 Supply Mixer; !- Connector 2 Name ConnectorList, SHWSys1 Demand Connectors, !- Name Connector:Splitter, !- Connector 1 Object Type SHWSys1 Demand Splitter, !- Connector 1 Name Connector:Mixer, !- Connector 2 Object Type SHWSys1 Demand Mixer; !- Connector 2 Name ConnectorList, HeatSys1 Supply Connectors, !- Name Connector:Splitter, !- Connector 1 Object Type HeatSys1 Supply Splitter,!- Connector 1 Name Connector:Mixer, !- Connector 2 Object Type HeatSys1 Supply Mixer; !- Connector 2 Name ConnectorList, HeatSys1 Demand Connectors, !- Name Connector:Splitter, !- Connector 1 Object Type HeatSys1 Demand Splitter,!- Connector 1 Name Connector:Mixer, !- Connector 2 Object Type HeatSys1 Demand Mixer; !- Connector 2 Name ConnectorList, CoolSys1 Supply Supply Side Connectors, !- Name Connector:Splitter, !- Connector 1 Object Type CoolSys1 Supply Supply Side Splitter,!- Connector 1 Name Connector:Mixer, !- Connector 2 Object Type CoolSys1 Supply Supply Side Mixer; !- Connector 2 Name ConnectorList, CoolSys1 Demand Demand Side Connectors, !- Name Connector:Splitter, !- Connector 1 Object Type CoolSys1 Demand Demand Side Splitter,!- Connector 1 Name Connector:Mixer, !- Connector 2 Object Type CoolSys1 Demand Demand Side Mixer; !- Connector 2 Name ConnectorList, TowerWaterSys Supply Connectors, !- Name Connector:Splitter, !- Connector 1 Object Type TowerWaterSys Supply Splitter, !- Connector 1 Name Connector:Mixer, !- Connector 2 Object Type TowerWaterSys Supply Mixer; !- Connector 2 Name ConnectorList, TowerWaterSys Demand Connectors, !- Name Connector:Splitter, !- Connector 1 Object Type TowerWaterSys Demand Splitter, !- Connector 1 Name Connector:Mixer, !- Connector 2 Object Type TowerWaterSys Demand Mixer; !- Connector 2 Name ConnectorList, CoolSys1 Supply Demand Side Connectors, !- Name Connector:Splitter, !- Connector 1 Object Type CoolSys1 Supply Demand Side Splitter, !- Connector 1 Name Connector:Mixer, !- Connector 2 Object Type CoolSys1 Supply Demand Side Mixer; !- Connector 2 Name ConnectorList, CoolSys1 Demand Supply Side Connectors, !- Name Connector:Splitter, !- Connector 1 Object Type CoolSys1 Demand Supply Side Splitter, !- Connector 1 Name Connector:Mixer, !- Connector 2 Object Type CoolSys1 Demand Supply Side Mixer; !- Connector 2 Name !- =========== ALL OBJECTS IN CLASS: BRANCH =========== Branch, VAV_1 Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type VAV_1_OA, !- Component 1 Name VAV_1 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name VAV_1_OA-VAV_1_CoolCNode,!- Component 1 Outlet Node Name Coil:Cooling:Water, !- Component 2 Object Type VAV_1_CoolC, !- Component 2 Name VAV_1_OA-VAV_1_CoolCNode,!- Component 2 Inlet Node Name VAV_1_CoolC-VAV_1_HeatCNode, !- Component 2 Outlet Node Name Coil:Heating:Water, !- Component 3 Object Type VAV_1_HeatC, !- Component 3 Name VAV_1_CoolC-VAV_1_HeatCNode, !- Component 3 Inlet Node Name VAV_1_HeatC-VAV_1_FanNode, !- Component 3 Outlet Node Name Fan:VariableVolume, !- Component 4 Object Type VAV_1_Fan, !- Component 4 Name VAV_1_HeatC-VAV_1_FanNode, !- Component 4 Inlet Node Name VAV_1 Supply Equipment Outlet Node; !- Component 4 Outlet Node Name Branch, VAV_ER Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type VAV_ER_OA, !- Component 1 Name VAV_ER Supply Equipment Inlet Node, !- Component 1 Inlet Node Name VAV_ER_OA-VAV_ER HumidifierNode, !- Component 1 Outlet Node Name Humidifier:Steam:Electric, !- Component 2 Object Type VAV_ER Humidifier, !- Component 2 Name VAV_ER_OA-VAV_ER HumidifierNode, !- Component 2 Inlet Node Name VAV_ER Humidifier-VAV_ER_ExtraElecHeatCNode, !- Component 2 Outlet Node Name Coil:Heating:Electric, !- Component 3 Object Type VAV_ER_ExtraElecHeatC, !- Component 3 Name VAV_ER Humidifier-VAV_ER_ExtraElecHeatCNode, !- Component 3 Inlet Node Name VAV_ER ExtraElecHeatC-VAV_ER_ExtraWaterHeatCNode, !- Component 3 Outlet Node Name Coil:Heating:Water, !- Component 4 Object Type VAV_ER_ExtraWaterHeatC, !- Component 4 Name VAV_ER ExtraElecHeatC-VAV_ER_ExtraWaterHeatCNode, !- Component 4 Inlet Node Name VAV_ER ExtraWaterHeatC-VAV_ER_CoolCNode, !- Component 4 Outlet Node Name Coil:Cooling:Water, !- Component 5 Object Type VAV_ER_CoolC, !- Component 5 Name VAV_ER ExtraWaterHeatC-VAV_ER_CoolCNode, !- Component 5 Inlet Node Name VAV_ER_CoolC-VAV_ER_HeatCNode, !- Component 5 Outlet Node Name Coil:Heating:Water, !- Component 6 Object Type VAV_ER_HeatC, !- Component 6 Name VAV_ER_CoolC-VAV_ER_HeatCNode, !- Component 6 Inlet Node Name VAV_ER_HeatC-VAV_ER_FanNode, !- Component 6 Outlet Node Name Fan:VariableVolume, !- Component 7 Object Type VAV_ER_Fan, !- Component 7 Name VAV_ER_HeatC-VAV_ER_FanNode, !- Component 7 Inlet Node Name VAV_ER Supply Equipment Outlet Node; !- Component 7 Outlet Node Name Branch, VAV_OR Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type VAV_OR_OA, !- Component 1 Name VAV_OR Supply Equipment Inlet Node, !- Component 1 Inlet Node Name VAV_OR_OA-VAV_OR HumidifierNode, !- Component 1 Outlet Node Name Humidifier:Steam:Electric, !- Component 2 Object Type VAV_OR Humidifier, !- Component 2 Name VAV_OR_OA-VAV_OR HumidifierNode, !- Component 2 Inlet Node Name VAV_OR Humidifier-VAV_OR_ExtraElecHeatCNode, !- Component 2 Outlet Node Name Coil:Heating:Electric, !- Component 3 Object Type VAV_OR_ExtraElecHeatC, !- Component 3 Name VAV_OR Humidifier-VAV_OR_ExtraElecHeatCNode, !- Component 3 Inlet Node Name VAV_OR ExtraElecHeatC-VAV_OR_ExtraWaterHeatCNode, !- Component 3 Outlet Node Name Coil:Heating:Water, !- Component 4 Object Type VAV_OR_ExtraWaterHeatC, !- Component 4 Name VAV_OR ExtraElecHeatC-VAV_OR_ExtraWaterHeatCNode, !- Component 4 Inlet Node Name VAV_OR ExtraWaterHeatC-VAV_OR_CoolCNode, !- Component 4 Outlet Node Name Coil:Cooling:Water, !- Component 5 Object Type VAV_OR_CoolC, !- Component 5 Name VAV_OR ExtraWaterHeatC-VAV_OR_CoolCNode, !- Component 5 Inlet Node Name VAV_OR_CoolC-VAV_OR_HeatCNode, !- Component 5 Outlet Node Name Coil:Heating:Water, !- Component 6 Object Type VAV_OR_HeatC, !- Component 6 Name VAV_OR_CoolC-VAV_OR_HeatCNode, !- Component 6 Inlet Node Name VAV_OR_HeatC-VAV_OR_FanNode, !- Component 6 Outlet Node Name Fan:VariableVolume, !- Component 7 Object Type VAV_OR_Fan, !- Component 7 Name VAV_OR_HeatC-VAV_OR_FanNode, !- Component 7 Inlet Node Name VAV_OR Supply Equipment Outlet Node; !- Component 7 Outlet Node Name Branch, VAV_ICU Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type VAV_ICU_OA, !- Component 1 Name VAV_ICU Supply Equipment Inlet Node, !- Component 1 Inlet Node Name VAV_ICU_OA-VAV_ICU HumidifierNode, !- Component 1 Outlet Node Name Humidifier:Steam:Electric, !- Component 2 Object Type VAV_ICU Humidifier, !- Component 2 Name VAV_ICU_OA-VAV_ICU HumidifierNode, !- Component 2 Inlet Node Name VAV_ICU Humidifier-VAV_ICU_ExtraElecHeatCNode, !- Component 2 Outlet Node Name Coil:Heating:Electric, !- Component 3 Object Type VAV_ICU_ExtraElecHeatC, !- Component 3 Name VAV_ICU Humidifier-VAV_ICU_ExtraElecHeatCNode, !- Component 3 Inlet Node Name VAV_ICU ExtraElecHeatC-VAV_ICU_ExtraWaterHeatCNode, !- Component 3 Outlet Node Name Coil:Heating:Water, !- Component 4 Object Type VAV_ICU_ExtraWaterHeatC, !- Component 4 Name VAV_ICU ExtraElecHeatC-VAV_ICU_ExtraWaterHeatCNode, !- Component 4 Inlet Node Name VAV_ICU ExtraWaterHeatC-VAV_ICU_CoolCNode, !- Component 4 Outlet Node Name Coil:Cooling:Water, !- Component 5 Object Type VAV_ICU_CoolC, !- Component 5 Name VAV_ICU ExtraWaterHeatC-VAV_ICU_CoolCNode, !- Component 5 Inlet Node Name VAV_ICU_CoolC-VAV_ICU_HeatCNode, !- Component 5 Outlet Node Name Coil:Heating:Water, !- Component 6 Object Type VAV_ICU_HeatC, !- Component 6 Name VAV_ICU_CoolC-VAV_ICU_HeatCNode, !- Component 6 Inlet Node Name VAV_ICU_HeatC-VAV_ICU_FanNode, !- Component 6 Outlet Node Name Fan:VariableVolume, !- Component 7 Object Type VAV_ICU_Fan, !- Component 7 Name VAV_ICU_HeatC-VAV_ICU_FanNode, !- Component 7 Inlet Node Name VAV_ICU Supply Equipment Outlet Node; !- Component 7 Outlet Node Name Branch, VAV_PATRMS Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type VAV_PATRMS_OA, !- Component 1 Name VAV_PATRMS Supply Equipment Inlet Node, !- Component 1 Inlet Node Name VAV_PATRMS_OA-VAV_PATRMS HumidifierNode, !- Component 1 Outlet Node Name Humidifier:Steam:Electric, !- Component 2 Object Type VAV_PATRMS Humidifier, !- Component 2 Name VAV_PATRMS_OA-VAV_PATRMS HumidifierNode, !- Component 2 Inlet Node Name VAV_PATRMS Humidifier-VAV_PATRMS_ExtraElecHeatCNode, !- Component 2 Outlet Node Name Coil:Heating:Electric, !- Component 3 Object Type VAV_PATRMS_ExtraElecHeatC, !- Component 3 Name VAV_PATRMS Humidifier-VAV_PATRMS_ExtraElecHeatCNode, !- Component 3 Inlet Node Name VAV_PATRMS ExtraElecHeatC-VAV_PATRMS_ExtraWaterHeatCNode, !- Component 3 Outlet Node Name Coil:Heating:Water, !- Component 4 Object Type VAV_PATRMS_ExtraWaterHeatC, !- Component 4 Name VAV_PATRMS ExtraElecHeatC-VAV_PATRMS_ExtraWaterHeatCNode, !- Component 4 Inlet Node Name VAV_PATRMS ExtraWaterHeatC-VAV_PATRMS_CoolCNode, !- Component 4 Outlet Node Name Coil:Cooling:Water, !- Component 5 Object Type VAV_PATRMS_CoolC, !- Component 5 Name VAV_PATRMS ExtraWaterHeatC-VAV_PATRMS_CoolCNode, !- Component 5 Inlet Node Name VAV_PATRMS_CoolC-VAV_PATRMS_HeatCNode, !- Component 5 Outlet Node Name Coil:Heating:Water, !- Component 6 Object Type VAV_PATRMS_HeatC, !- Component 6 Name VAV_PATRMS_CoolC-VAV_PATRMS_HeatCNode, !- Component 6 Inlet Node Name VAV_PATRMS_HeatC-VAV_PATRMS_FanNode, !- Component 6 Outlet Node Name Fan:VariableVolume, !- Component 7 Object Type VAV_PATRMS_Fan, !- Component 7 Name VAV_PATRMS_HeatC-VAV_PATRMS_FanNode, !- Component 7 Inlet Node Name VAV_PATRMS Supply Equipment Outlet Node; !- Component 7 Outlet Node Name Branch, VAV_2 Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type VAV_2_OA, !- Component 1 Name VAV_2 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name VAV_2_OA-VAV_2_CoolCNode,!- Component 1 Outlet Node Name Coil:Cooling:Water, !- Component 2 Object Type VAV_2_CoolC, !- Component 2 Name VAV_2_OA-VAV_2_CoolCNode,!- Component 2 Inlet Node Name VAV_2_CoolC-VAV_2_HeatCNode, !- Component 2 Outlet Node Name Coil:Heating:Water, !- Component 3 Object Type VAV_2_HeatC, !- Component 3 Name VAV_2_CoolC-VAV_2_HeatCNode, !- Component 3 Inlet Node Name VAV_2_HeatC-VAV_2_FanNode, !- Component 3 Outlet Node Name Fan:VariableVolume, !- Component 4 Object Type VAV_2_Fan, !- Component 4 Name VAV_2_HeatC-VAV_2_FanNode, !- Component 4 Inlet Node Name VAV_2 Supply Equipment Outlet Node; !- Component 4 Outlet Node Name Branch, VAV_LABS Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type VAV_LABS_OA, !- Component 1 Name VAV_LABS Supply Equipment Inlet Node, !- Component 1 Inlet Node Name VAV_LABS_OA-VAV_LABS HumidifierNode, !- Component 1 Outlet Node Name Humidifier:Steam:Electric, !- Component 2 Object Type VAV_LABS Humidifier, !- Component 2 Name VAV_LABS_OA-VAV_LABS HumidifierNode, !- Component 2 Inlet Node Name VAV_LABS Humidifier-VAV_LABS_ExtraElecHeatCNode, !- Component 2 Outlet Node Name Coil:Heating:Electric, !- Component 3 Object Type VAV_LABS_ExtraElecHeatC, !- Component 3 Name VAV_LABS Humidifier-VAV_LABS_ExtraElecHeatCNode, !- Component 3 Inlet Node Name VAV_LABS ExtraElecHeatC-VAV_LABS_ExtraWaterHeatCNode, !- Component 3 Outlet Node Name Coil:Heating:Water, !- Component 4 Object Type VAV_LABS_ExtraWaterHeatC,!- Component 4 Name VAV_LABS ExtraElecHeatC-VAV_LABS_ExtraWaterHeatCNode, !- Component 4 Inlet Node Name VAV_LABS ExtraWaterHeatC-VAV_LABS_CoolCNode, !- Component 4 Outlet Node Name Coil:Cooling:Water, !- Component 5 Object Type VAV_LABS_CoolC, !- Component 5 Name VAV_LABS ExtraWaterHeatC-VAV_LABS_CoolCNode, !- Component 5 Inlet Node Name VAV_LABS_CoolC-VAV_LABS_HeatCNode, !- Component 5 Outlet Node Name Coil:Heating:Water, !- Component 6 Object Type VAV_LABS_HeatC, !- Component 6 Name VAV_LABS_CoolC-VAV_LABS_HeatCNode, !- Component 6 Inlet Node Name VAV_LABS_HeatC-VAV_LABS_FanNode, !- Component 6 Outlet Node Name Fan:VariableVolume, !- Component 7 Object Type VAV_LABS_Fan, !- Component 7 Name VAV_LABS_HeatC-VAV_LABS_FanNode, !- Component 7 Inlet Node Name VAV_LABS Supply Equipment Outlet Node; !- Component 7 Outlet Node Name Branch, CAV_KITCHEN Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type CAV_KITCHEN_OA, !- Component 1 Name CAV_KITCHEN Supply Equipment Inlet Node, !- Component 1 Inlet Node Name CAV_KITCHEN_OA-CAV_KITCHEN_CoolCNode, !- Component 1 Outlet Node Name Coil:Cooling:Water, !- Component 2 Object Type CAV_KITCHEN_CoolC, !- Component 2 Name CAV_KITCHEN_OA-CAV_KITCHEN_CoolCNode, !- Component 2 Inlet Node Name CAV_KITCHEN_CoolC-CAV_KITCHEN_HeatCNode, !- Component 2 Outlet Node Name Coil:Heating:Water, !- Component 3 Object Type CAV_KITCHEN_HeatC, !- Component 3 Name CAV_KITCHEN_CoolC-CAV_KITCHEN_HeatCNode, !- Component 3 Inlet Node Name CAV_KITCHEN_HeatC-CAV_KITCHEN_FanNode, !- Component 3 Outlet Node Name Fan:ConstantVolume, !- Component 4 Object Type CAV_KITCHEN_Fan, !- Component 4 Name CAV_KITCHEN_HeatC-CAV_KITCHEN_FanNode, !- Component 4 Inlet Node Name CAV_KITCHEN Supply Equipment Outlet Node; !- Component 4 Outlet Node Name Branch, SHWSys1 Supply Inlet Branch, !- Name , !- Pressure Drop Curve Name Pump:ConstantSpeed, !- Component 1 Object Type SHWSys1 Pump, !- Component 1 Name SHWSys1 Supply Inlet Node, !- Component 1 Inlet Node Name SHWSys1 Pump-SHWSys1 Water HeaterNodeviaConnector; !- Component 1 Outlet Node Name Branch, SHWSys1 Supply Equipment Branch, !- Name , !- Pressure Drop Curve Name WaterHeater:Mixed, !- Component 1 Object Type SHWSys1 Water Heater, !- Component 1 Name SHWSys1 Pump-SHWSys1 Water HeaterNode, !- Component 1 Inlet Node Name SHWSys1 Supply Equipment Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Supply Equipment Bypass Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type SHWSys1 Supply Equipment Bypass Pipe, !- Component 1 Name SHWSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name SHWSys1 Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Supply Outlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type SHWSys1 Supply Outlet Pipe, !- Component 1 Name SHWSys1 Supply Mixer-SHWSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name SHWSys1 Supply Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Inlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type SHWSys1 Demand Inlet Pipe, !- Component 1 Name SHWSys1 Demand Inlet Node, !- Component 1 Inlet Node Name SHWSys1 Demand Inlet Pipe-SHWSys1 Demand Mixer; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 1, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type ER_Exam1_Mult4_Flr_1 sub cat, !- Component 1 Name ER_Exam1_Mult4_Flr_1 sub cat Water Inlet Node, !- Component 1 Inlet Node Name ER_Exam1_Mult4_Flr_1 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 2, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type ER_Trauma1_Flr_1 sub cat,!- Component 1 Name ER_Trauma1_Flr_1 sub cat Water Inlet Node, !- Component 1 Inlet Node Name ER_Trauma1_Flr_1 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 3, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type ER_Exam3_Mult4_Flr_1 sub cat, !- Component 1 Name ER_Exam3_Mult4_Flr_1 sub cat Water Inlet Node, !- Component 1 Inlet Node Name ER_Exam3_Mult4_Flr_1 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 4, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type ER_Trauma2_Flr_1 sub cat,!- Component 1 Name ER_Trauma2_Flr_1 sub cat Water Inlet Node, !- Component 1 Inlet Node Name ER_Trauma2_Flr_1 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 5, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type ER_Triage_Mult4_Flr_1 sub cat, !- Component 1 Name ER_Triage_Mult4_Flr_1 sub cat Water Inlet Node, !- Component 1 Inlet Node Name ER_Triage_Mult4_Flr_1 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 6, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type OR1_Flr_2 sub cat, !- Component 1 Name OR1_Flr_2 sub cat Water Inlet Node, !- Component 1 Inlet Node Name OR1_Flr_2 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 7, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type OR2_Mult5_Flr_2 sub cat, !- Component 1 Name OR2_Mult5_Flr_2 sub cat Water Inlet Node, !- Component 1 Inlet Node Name OR2_Mult5_Flr_2 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 8, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type OR3_Flr_2 sub cat, !- Component 1 Name OR3_Flr_2 sub cat Water Inlet Node, !- Component 1 Inlet Node Name OR3_Flr_2 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 9, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type OR4_Flr_2 sub cat, !- Component 1 Name OR4_Flr_2 sub cat Water Inlet Node, !- Component 1 Inlet Node Name OR4_Flr_2 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 10, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type PatRoom1_Mult10_Flr_3 sub cat, !- Component 1 Name PatRoom1_Mult10_Flr_3 sub cat Water Inlet Node, !- Component 1 Inlet Node Name PatRoom1_Mult10_Flr_3 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 11, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type PatRoom2_Flr_3 sub cat, !- Component 1 Name PatRoom2_Flr_3 sub cat Water Inlet Node, !- Component 1 Inlet Node Name PatRoom2_Flr_3 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 12, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type PatRoom3_Mult10_Flr_3 sub cat, !- Component 1 Name PatRoom3_Mult10_Flr_3 sub cat Water Inlet Node, !- Component 1 Inlet Node Name PatRoom3_Mult10_Flr_3 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 13, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type PatRoom4_Flr_3 sub cat, !- Component 1 Name PatRoom4_Flr_3 sub cat Water Inlet Node, !- Component 1 Inlet Node Name PatRoom4_Flr_3 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 14, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type PatRoom5_Mult10_Flr_3 sub cat, !- Component 1 Name PatRoom5_Mult10_Flr_3 sub cat Water Inlet Node, !- Component 1 Inlet Node Name PatRoom5_Mult10_Flr_3 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 15, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type PhysTherapy_Flr_3 sub cat, !- Component 1 Name PhysTherapy_Flr_3 sub cat Water Inlet Node, !- Component 1 Inlet Node Name PhysTherapy_Flr_3 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 16, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type PatRoom6_Flr_3 sub cat, !- Component 1 Name PatRoom6_Flr_3 sub cat Water Inlet Node, !- Component 1 Inlet Node Name PatRoom6_Flr_3 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 17, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type PatRoom7_Mult10_Flr_3 sub cat, !- Component 1 Name PatRoom7_Mult10_Flr_3 sub cat Water Inlet Node, !- Component 1 Inlet Node Name PatRoom7_Mult10_Flr_3 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 18, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type PatRoom8_Flr_3 sub cat, !- Component 1 Name PatRoom8_Flr_3 sub cat Water Inlet Node, !- Component 1 Inlet Node Name PatRoom8_Flr_3 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 19, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Lab_Flr_3 sub cat, !- Component 1 Name Lab_Flr_3 sub cat Water Inlet Node, !- Component 1 Inlet Node Name Lab_Flr_3 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 20, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type PatRoom1_Mult10_Flr_4 sub cat, !- Component 1 Name PatRoom1_Mult10_Flr_4 sub cat Water Inlet Node, !- Component 1 Inlet Node Name PatRoom1_Mult10_Flr_4 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 21, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type PatRoom2_Flr_4 sub cat, !- Component 1 Name PatRoom2_Flr_4 sub cat Water Inlet Node, !- Component 1 Inlet Node Name PatRoom2_Flr_4 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 22, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type PatRoom3_Mult10_Flr_4 sub cat, !- Component 1 Name PatRoom3_Mult10_Flr_4 sub cat Water Inlet Node, !- Component 1 Inlet Node Name PatRoom3_Mult10_Flr_4 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 23, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type PatRoom4_Flr_4 sub cat, !- Component 1 Name PatRoom4_Flr_4 sub cat Water Inlet Node, !- Component 1 Inlet Node Name PatRoom4_Flr_4 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 24, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type PatRoom5_Mult10_Flr_4 sub cat, !- Component 1 Name PatRoom5_Mult10_Flr_4 sub cat Water Inlet Node, !- Component 1 Inlet Node Name PatRoom5_Mult10_Flr_4 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 25, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Radiology_Flr_4 sub cat, !- Component 1 Name Radiology_Flr_4 sub cat Water Inlet Node, !- Component 1 Inlet Node Name Radiology_Flr_4 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 26, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type PatRoom6_Flr_4 sub cat, !- Component 1 Name PatRoom6_Flr_4 sub cat Water Inlet Node, !- Component 1 Inlet Node Name PatRoom6_Flr_4 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 27, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type PatRoom7_Mult10_Flr_4 sub cat, !- Component 1 Name PatRoom7_Mult10_Flr_4 sub cat Water Inlet Node, !- Component 1 Inlet Node Name PatRoom7_Mult10_Flr_4 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 28, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type PatRoom8_Flr_4 sub cat, !- Component 1 Name PatRoom8_Flr_4 sub cat Water Inlet Node, !- Component 1 Inlet Node Name PatRoom8_Flr_4 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 29, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Lab_Flr_4 sub cat, !- Component 1 Name Lab_Flr_4 sub cat Water Inlet Node, !- Component 1 Inlet Node Name Lab_Flr_4 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 30, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Kitchen_Flr_5 sub cat, !- Component 1 Name Kitchen_Flr_5 sub cat Water Inlet Node, !- Component 1 Inlet Node Name Kitchen_Flr_5 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Bypass Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type SHWSys1 Demand Bypass Pipe, !- Component 1 Name SHWSys1 Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name SHWSys1 Demand Bypass Pipe Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Outlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type SHWSys1 Demand Outlet Pipe, !- Component 1 Name SHWSys1 Demand Mixer-SHWSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name SHWSys1 Demand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Supply Inlet Branch, !- Name , !- Pressure Drop Curve Name Pump:VariableSpeed, !- Component 1 Object Type HeatSys1 Pump, !- Component 1 Name HeatSys1 Supply Inlet Node, !- Component 1 Inlet Node Name HeatSys1 Pump-HeatSys1 BoilerNodeviaConnector, !- Component 1 Outlet Node Name WaterHeater:Mixed, !- Component 2 Object Type Dummy Water Heater, !- Component 2 Name HeatSys1 Pump-HeatSys1 BoilerNodeviaConnector, !- Component 2 Inlet Node Name Dummy Water Heater Use Side Outlet Node; !- Component 2 Outlet Node Name Branch, HeatSys1 Supply Equipment Branch, !- Name , !- Pressure Drop Curve Name Boiler:HotWater, !- Component 1 Object Type HeatSys1 Boiler, !- Component 1 Name HeatSys1 Pump-HeatSys1 BoilerNode, !- Component 1 Inlet Node Name HeatSys1 Supply Equipment Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Supply Equipment Bypass Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type HeatSys1 Supply Equipment Bypass Pipe, !- Component 1 Name HeatSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name HeatSys1 Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Supply Outlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type HeatSys1 Supply Outlet Pipe, !- Component 1 Name HeatSys1 Supply Mixer-HeatSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name HeatSys1 Supply Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Inlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type HeatSys1 Demand Inlet Pipe, !- Component 1 Name HeatSys1 Demand Inlet Node, !- Component 1 Inlet Node Name HeatSys1 Demand Inlet Pipe-HeatSys1 Demand Mixer; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 1, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Basement VAV Box Reheat Coil, !- Component 1 Name Basement VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Basement VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 2, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type ER_Exam1_Mult4_Flr_1 VAV Box Reheat Coil, !- Component 1 Name ER_Exam1_Mult4_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name ER_Exam1_Mult4_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 3, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type ER_Trauma1_Flr_1 VAV Box Reheat Coil, !- Component 1 Name ER_Trauma1_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name ER_Trauma1_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 4, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type ER_Exam3_Mult4_Flr_1 VAV Box Reheat Coil, !- Component 1 Name ER_Exam3_Mult4_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name ER_Exam3_Mult4_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 5, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type ER_Trauma2_Flr_1 VAV Box Reheat Coil, !- Component 1 Name ER_Trauma2_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name ER_Trauma2_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 6, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type ER_Triage_Mult4_Flr_1 VAV Box Reheat Coil, !- Component 1 Name ER_Triage_Mult4_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name ER_Triage_Mult4_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 7, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Office1_Mult4_Flr_1 VAV Box Reheat Coil, !- Component 1 Name Office1_Mult4_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Office1_Mult4_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 8, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Lobby_Records_Flr_1 VAV Box Reheat Coil, !- Component 1 Name Lobby_Records_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Lobby_Records_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 9, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corridor_Flr_1 VAV Box Reheat Coil, !- Component 1 Name Corridor_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corridor_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 10, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type ER_NurseStn_Lobby_Flr_1 VAV Box Reheat Coil, !- Component 1 Name ER_NurseStn_Lobby_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name ER_NurseStn_Lobby_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 11, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type OR1_Flr_2 VAV Box Reheat Coil, !- Component 1 Name OR1_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name OR1_Flr_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 12, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type OR2_Mult5_Flr_2 VAV Box Reheat Coil, !- Component 1 Name OR2_Mult5_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name OR2_Mult5_Flr_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 13, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type OR3_Flr_2 VAV Box Reheat Coil, !- Component 1 Name OR3_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name OR3_Flr_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 14, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type OR4_Flr_2 VAV Box Reheat Coil, !- Component 1 Name OR4_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name OR4_Flr_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 15, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type IC_PatRoom1_Mult5_Flr_2 VAV Box Reheat Coil, !- Component 1 Name IC_PatRoom1_Mult5_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name IC_PatRoom1_Mult5_Flr_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 16, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type IC_PatRoom2_Flr_2 VAV Box Reheat Coil, !- Component 1 Name IC_PatRoom2_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name IC_PatRoom2_Flr_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 17, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type IC_PatRoom3_Mult6_Flr_2 VAV Box Reheat Coil, !- Component 1 Name IC_PatRoom3_Mult6_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name IC_PatRoom3_Mult6_Flr_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 18, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type ICU_Flr_2 VAV Box Reheat Coil, !- Component 1 Name ICU_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name ICU_Flr_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 19, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type ICU_NurseStn_Lobby_Flr_2 VAV Box Reheat Coil, !- Component 1 Name ICU_NurseStn_Lobby_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name ICU_NurseStn_Lobby_Flr_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 20, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corridor_Flr_2 VAV Box Reheat Coil, !- Component 1 Name Corridor_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corridor_Flr_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 21, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type OR_NurseStn_Lobby_Flr_2 VAV Box Reheat Coil, !- Component 1 Name OR_NurseStn_Lobby_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name OR_NurseStn_Lobby_Flr_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 22, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type PatRoom1_Mult10_Flr_3 VAV Box Reheat Coil, !- Component 1 Name PatRoom1_Mult10_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name PatRoom1_Mult10_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 23, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type PatRoom2_Flr_3 VAV Box Reheat Coil, !- Component 1 Name PatRoom2_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name PatRoom2_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 24, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type PatRoom3_Mult10_Flr_3 VAV Box Reheat Coil, !- Component 1 Name PatRoom3_Mult10_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name PatRoom3_Mult10_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 25, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type PatRoom4_Flr_3 VAV Box Reheat Coil, !- Component 1 Name PatRoom4_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name PatRoom4_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 26, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type PatRoom5_Mult10_Flr_3 VAV Box Reheat Coil, !- Component 1 Name PatRoom5_Mult10_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name PatRoom5_Mult10_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 27, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type PhysTherapy_Flr_3 VAV Box Reheat Coil, !- Component 1 Name PhysTherapy_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name PhysTherapy_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 28, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type PatRoom6_Flr_3 VAV Box Reheat Coil, !- Component 1 Name PatRoom6_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name PatRoom6_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 29, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type PatRoom7_Mult10_Flr_3 VAV Box Reheat Coil, !- Component 1 Name PatRoom7_Mult10_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name PatRoom7_Mult10_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 30, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type PatRoom8_Flr_3 VAV Box Reheat Coil, !- Component 1 Name PatRoom8_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name PatRoom8_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 31, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type NurseStn_Lobby_Flr_3 VAV Box Reheat Coil, !- Component 1 Name NurseStn_Lobby_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name NurseStn_Lobby_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 32, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Lab_Flr_3 VAV Box Reheat Coil, !- Component 1 Name Lab_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Lab_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 33, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corridor_SE_Flr_3 VAV Box Reheat Coil, !- Component 1 Name Corridor_SE_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corridor_SE_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 34, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corridor_NW_Flr_3 VAV Box Reheat Coil, !- Component 1 Name Corridor_NW_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corridor_NW_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 35, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type PatRoom1_Mult10_Flr_4 VAV Box Reheat Coil, !- Component 1 Name PatRoom1_Mult10_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name PatRoom1_Mult10_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 36, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type PatRoom2_Flr_4 VAV Box Reheat Coil, !- Component 1 Name PatRoom2_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name PatRoom2_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 37, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type PatRoom3_Mult10_Flr_4 VAV Box Reheat Coil, !- Component 1 Name PatRoom3_Mult10_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name PatRoom3_Mult10_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 38, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type PatRoom4_Flr_4 VAV Box Reheat Coil, !- Component 1 Name PatRoom4_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name PatRoom4_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 39, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type PatRoom5_Mult10_Flr_4 VAV Box Reheat Coil, !- Component 1 Name PatRoom5_Mult10_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name PatRoom5_Mult10_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 40, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Radiology_Flr_4 VAV Box Reheat Coil, !- Component 1 Name Radiology_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Radiology_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 41, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type PatRoom6_Flr_4 VAV Box Reheat Coil, !- Component 1 Name PatRoom6_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name PatRoom6_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 42, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type PatRoom7_Mult10_Flr_4 VAV Box Reheat Coil, !- Component 1 Name PatRoom7_Mult10_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name PatRoom7_Mult10_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 43, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type PatRoom8_Flr_4 VAV Box Reheat Coil, !- Component 1 Name PatRoom8_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name PatRoom8_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 44, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type NurseStn_Lobby_Flr_4 VAV Box Reheat Coil, !- Component 1 Name NurseStn_Lobby_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name NurseStn_Lobby_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 45, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Lab_Flr_4 VAV Box Reheat Coil, !- Component 1 Name Lab_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Lab_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 46, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corridor_SE_Flr_4 VAV Box Reheat Coil, !- Component 1 Name Corridor_SE_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corridor_SE_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 47, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corridor_NW_Flr_4 VAV Box Reheat Coil, !- Component 1 Name Corridor_NW_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corridor_NW_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 48, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Dining_Flr_5 VAV Box Reheat Coil, !- Component 1 Name Dining_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Dining_Flr_5 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 49, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type NurseStn_Lobby_Flr_5 VAV Box Reheat Coil, !- Component 1 Name NurseStn_Lobby_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name NurseStn_Lobby_Flr_5 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 50, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Office1_Flr_5 VAV Box Reheat Coil, !- Component 1 Name Office1_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Office1_Flr_5 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 51, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Office2_Mult5_Flr_5 VAV Box Reheat Coil, !- Component 1 Name Office2_Mult5_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Office2_Mult5_Flr_5 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 52, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Office3_Flr_5 VAV Box Reheat Coil, !- Component 1 Name Office3_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Office3_Flr_5 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 53, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Office4_Mult6_Flr_5 VAV Box Reheat Coil, !- Component 1 Name Office4_Mult6_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Office4_Mult6_Flr_5 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 54, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corridor_Flr_5 VAV Box Reheat Coil, !- Component 1 Name Corridor_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corridor_Flr_5 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 55, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type VAV_1_HeatC, !- Component 1 Name VAV_1_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_1_HeatCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 56, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type VAV_ER_HeatC, !- Component 1 Name VAV_ER_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_ER_HeatCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 57, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type VAV_OR_HeatC, !- Component 1 Name VAV_OR_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_OR_HeatCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 58, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type VAV_ICU_HeatC, !- Component 1 Name VAV_ICU_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_ICU_HeatCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 59, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type VAV_PATRMS_HeatC, !- Component 1 Name VAV_PATRMS_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_PATRMS_HeatCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 60, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type VAV_2_HeatC, !- Component 1 Name VAV_2_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_2_HeatCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 61, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type VAV_LABS_HeatC, !- Component 1 Name VAV_LABS_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_LABS_HeatCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 62, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type CAV_KITCHEN_HeatC, !- Component 1 Name CAV_KITCHEN_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name CAV_KITCHEN_HeatCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 63, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type VAV_PATRMS_ExtraWaterHeatC, !- Component 1 Name VAV_PATRMS_ExtraWaterHeatCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_PATRMS_ExtraWaterHeatCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 64, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type VAV_ER_ExtraWaterHeatC, !- Component 1 Name VAV_ER_ExtraWaterHeatCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_ER_ExtraWaterHeatCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 65, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type VAV_OR_ExtraWaterHeatC, !- Component 1 Name VAV_OR_ExtraWaterHeatCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_OR_ExtraWaterHeatCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 66, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type VAV_ICU_ExtraWaterHeatC, !- Component 1 Name VAV_ICU_ExtraWaterHeatCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_ICU_ExtraWaterHeatCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 67, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type VAV_LABS_ExtraWaterHeatC,!- Component 1 Name VAV_LABS_ExtraWaterHeatCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_LABS_ExtraWaterHeatCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Bypass Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type HeatSys1 Demand Bypass Pipe, !- Component 1 Name HeatSys1 Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name HeatSys1 Demand Bypass Pipe Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Outlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type HeatSys1 Demand Outlet Pipe, !- Component 1 Name HeatSys1 Demand Mixer-HeatSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name HeatSys1 Demand Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Supply Inlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type CoolSys1 Supply Inlet Pipe, !- Component 1 Name CoolSys1 Supply Inlet Node, !- Component 1 Inlet Node Name CoolSys1 Pump-CoolSys1 ChillerNodeviaConnector; !- Component 1 Outlet Node Name Branch, CoolSys1 Supply Equipment Branch 1, !- Name , !- Pressure Drop Curve Name Pump:ConstantSpeed, !- Component 1 Object Type CoolSys1 Chiller1 Pump, !- Component 1 Name CoolSys1 Chiller1 Pump Inlet Node, !- Component 1 Inlet Node Name CoolSys1 Pump-CoolSys1 Chiller1Node, !- Component 1 Outlet Node Name Chiller:Electric:ReformulatedEIR, !- Component 2 Object Type CoolSys1 Chiller1, !- Component 2 Name CoolSys1 Pump-CoolSys1 Chiller1Node, !- Component 2 Inlet Node Name CoolSys1 Supply Equipment Outlet Node 1; !- Component 2 Outlet Node Name Branch, CoolSys1 Supply Equipment Branch 2, !- Name , !- Pressure Drop Curve Name Pump:ConstantSpeed, !- Component 1 Object Type CoolSys1 Chiller2 Pump, !- Component 1 Name CoolSys1 Chiller2 Pump Inlet Node, !- Component 1 Inlet Node Name CoolSys1 Pump-CoolSys1 Chiller2Node, !- Component 1 Outlet Node Name Chiller:Electric:ReformulatedEIR, !- Component 2 Object Type CoolSys1 Chiller2, !- Component 2 Name CoolSys1 Pump-CoolSys1 Chiller2Node, !- Component 2 Inlet Node Name CoolSys1 Supply Equipment Outlet Node 2; !- Component 2 Outlet Node Name Branch, CoolSys1 Supply Equipment Bypass Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type CoolSys1 Supply Equipment Bypass Pipe, !- Component 1 Name CoolSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name CoolSys1 Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Supply Outlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type CoolSys1 Supply Outlet Pipe, !- Component 1 Name CoolSys1 Supply Mixer-CoolSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name CoolSys1 Supply Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Demand Inlet Branch, !- Name , !- Pressure Drop Curve Name Pump:VariableSpeed, !- Component 1 Object Type CoolSys1 Pump Secondary, !- Component 1 Name CoolSys1 Demand Inlet Node, !- Component 1 Inlet Node Name CoolSys1 Pump Secondary-CoolSys1 Demand Mixer; !- Component 1 Outlet Node Name Branch, CoolSys1 Demand Load Branch 1, !- Name , !- Pressure Drop Curve Name Coil:Cooling:Water, !- Component 1 Object Type VAV_1_CoolC, !- Component 1 Name VAV_1_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_1_CoolCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Demand Load Branch 2, !- Name , !- Pressure Drop Curve Name Coil:Cooling:Water, !- Component 1 Object Type VAV_ER_CoolC, !- Component 1 Name VAV_ER_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_ER_CoolCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Demand Load Branch 3, !- Name , !- Pressure Drop Curve Name Coil:Cooling:Water, !- Component 1 Object Type VAV_OR_CoolC, !- Component 1 Name VAV_OR_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_OR_CoolCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Demand Load Branch 4, !- Name , !- Pressure Drop Curve Name Coil:Cooling:Water, !- Component 1 Object Type VAV_ICU_CoolC, !- Component 1 Name VAV_ICU_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_ICU_CoolCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Demand Load Branch 5, !- Name , !- Pressure Drop Curve Name Coil:Cooling:Water, !- Component 1 Object Type VAV_PATRMS_CoolC, !- Component 1 Name VAV_PATRMS_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_PATRMS_CoolCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Demand Load Branch 6, !- Name , !- Pressure Drop Curve Name Coil:Cooling:Water, !- Component 1 Object Type VAV_2_CoolC, !- Component 1 Name VAV_2_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_2_CoolCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Demand Load Branch 7, !- Name , !- Pressure Drop Curve Name Coil:Cooling:Water, !- Component 1 Object Type VAV_LABS_CoolC, !- Component 1 Name VAV_LABS_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_LABS_CoolCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Demand Load Branch 8, !- Name , !- Pressure Drop Curve Name Coil:Cooling:Water, !- Component 1 Object Type CAV_KITCHEN_CoolC, !- Component 1 Name CAV_KITCHEN_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name CAV_KITCHEN_CoolCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Demand Outlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type CoolSys1 Demand Outlet Pipe, !- Component 1 Name CoolSys1 Demand Mixer-CoolSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name CoolSys1 Demand Outlet Node; !- Component 1 Outlet Node Name Branch, TowerWaterSys Supply Inlet Branch, !- Name , !- Pressure Drop Curve Name HeaderedPumps:VariableSpeed, !- Component 1 Object Type TowerWaterSys Pump, !- Component 1 Name TowerWaterSys Supply Inlet Node, !- Component 1 Inlet Node Name TowerWaterSys Pump-TowerWaterSys CoolTowerNodeviaConnector; !- Component 1 Outlet Node Name Branch, TowerWaterSys Supply Equipment Branch 1, !- Name , !- Pressure Drop Curve Name CoolingTower:VariableSpeed, !- Component 1 Object Type TowerWaterSys CoolTower 1, !- Component 1 Name TowerWaterSys Pump-TowerWaterSys CoolTower1Node, !- Component 1 Inlet Node Name TowerWaterSys Supply Equipment Outlet Node 1; !- Component 1 Outlet Node Name Branch, TowerWaterSys Supply Equipment Branch 2, !- Name , !- Pressure Drop Curve Name CoolingTower:VariableSpeed, !- Component 1 Object Type TowerWaterSys CoolTower 2, !- Component 1 Name TowerWaterSys Pump-TowerWaterSys CoolTower2Node, !- Component 1 Inlet Node Name TowerWaterSys Supply Equipment Outlet Node 2; !- Component 1 Outlet Node Name Branch, TowerWaterSys Supply Equipment Bypass Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type TowerWaterSys Supply Equipment Bypass Pipe, !- Component 1 Name TowerWaterSys Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name TowerWaterSys Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name Branch, TowerWaterSys Supply Outlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type TowerWaterSys Supply Outlet Pipe, !- Component 1 Name TowerWaterSys Supply Mixer-TowerWaterSys Supply Outlet Pipe, !- Component 1 Inlet Node Name TowerWaterSys Supply Outlet Node; !- Component 1 Outlet Node Name Branch, TowerWaterSys Demand Inlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type TowerWaterSys Demand Inlet Pipe, !- Component 1 Name TowerWaterSys Demand Inlet Node, !- Component 1 Inlet Node Name TowerWaterSys Demand Inlet Pipe-TowerWaterSys Demand Mixer; !- Component 1 Outlet Node Name Branch, TowerWaterSys Demand Load Branch 1, !- Name , !- Pressure Drop Curve Name Chiller:Electric:ReformulatedEIR, !- Component 1 Object Type CoolSys1 Chiller1, !- Component 1 Name CoolSys1 Chiller1 Water Inlet Node, !- Component 1 Inlet Node Name CoolSys1 Chiller1 Water Outlet Node; !- Component 1 Outlet Node Name Branch, TowerWaterSys Demand Load Branch 2, !- Name , !- Pressure Drop Curve Name Chiller:Electric:ReformulatedEIR, !- Component 1 Object Type CoolSys1 Chiller2, !- Component 1 Name CoolSys1 Chiller2 Water Inlet Node, !- Component 1 Inlet Node Name CoolSys1 Chiller2 Water Outlet Node; !- Component 1 Outlet Node Name Branch, TowerWaterSys Demand Bypass Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type TowerWaterSys Demand Bypass Pipe, !- Component 1 Name TowerWaterSys Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name TowerWaterSys Demand Bypass Pipe Outlet Node; !- Component 1 Outlet Node Name Branch, TowerWaterSys Demand Outlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type TowerWaterSys Demand Outlet Pipe, !- Component 1 Name TowerWaterSys Demand Mixer-TowerWaterSys Demand Outlet Pipe, !- Component 1 Inlet Node Name TowerWaterSys Demand Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Heat Exchanger Supply Branch, !- Name , !- Pressure Drop Curve Name HeatExchanger:FluidToFluid, !- Component 1 Object Type Bypass Heat Exchanger , !- Component 1 Name CoolSys1 Exchanger Supply Inlet Node, !- Component 1 Inlet Node Name CoolSys1 Exchanger Supply Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Heat Exchanger Demand Branch, !- Name , !- Pressure Drop Curve Name HeatExchanger:FluidToFluid, !- Component 1 Object Type Bypass Heat Exchanger , !- Component 1 Name CoolSys1 Exchanger Demand Inlet Node, !- Component 1 Inlet Node Name CoolSys1 Exchanger Demand Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Supply Side Bypass, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type CoolSys1 Supply Bypass, !- Component 1 Name CoolSys1 Supply Bypass Inlet Node, !- Component 1 Inlet Node Name CoolSys1 Supply Bypass Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Demand Side Bypass, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type CoolSys1 Demand Bypass, !- Component 1 Name CoolSys1 Demand Bypass Inlet Node, !- Component 1 Inlet Node Name CoolSys1 Demand Bypass Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Supply Demand Side Inlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type CoolSys1 Supply Demand Side Inlet Pipe, !- Component 1 Name CoolSys1 Supply Demand Side Inlet Pipe Inlet Node, !- Component 1 Inlet Node Name CoolSys1 Supply Demand Side Inlet Pipe Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Supply Demand Side Outlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type CoolSys1 Supply Demand Side Outlet Pipe , !- Component 1 Name CoolSys1 Supply Demand Side Outlet Pipe Inlet Node, !- Component 1 Inlet Node Name CoolSys1 Supply Demand Side Outlet Pipe Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Demand Supply Side Inlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type CoolSys1 Demand Supply Side Inlet Pipe , !- Component 1 Name CoolSys1 Demand Supply Side Inlet Pipe Inlet Node, !- Component 1 Inlet Node Name CoolSys1 Demand Supply Side Inlet Pipe Outlet Node, !- Component 1 Outlet Node Name HeatExchanger:FluidToFluid, !- Component 2 Object Type Heat Recovery Chiller Bypass Heat Exchanger, !- Component 2 Name CoolSys1 Demand Supply Side Inlet Pipe Outlet Node, !- Component 2 Inlet Node Name Heat Recovery Chiller Bypass Heat Exchanger Outlet; !- Component 2 Outlet Node Name Branch, CoolSys1 Demand Supply Side Outlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type CoolSys1 Demand Supply Side Outlet Pipe , !- Component 1 Name CoolSys1 Demand Supply Side Outlet Pipe Inlet Node, !- Component 1 Inlet Node Name CoolSys1 Demand Supply Side Outlet Pipe Outlet Node; !- Component 1 Outlet Node Name BranchList, Heat Recovery Chiller Bypass Loop Supply Side Branches, !- Name Heat Recovery Chiller Bypass Loop Supply Inlet Branch, !- Branch 1 Name Heat Recovery Chiller Bypass Loop Supply Equipment Branch, !- Branch 2 Name Heat Recovery Chiller Bypass Loop Supply Outlet Branch; !- Branch 3 Name BranchList, Heat Recovery Chiller Bypass Loop Demand Side Branches, !- Name Heat Recovery Chiller Bypass Loop Demand Inlet Branch, !- Branch 1 Name Heat Recovery Chiller Bypass Loop Demand Load Branch, !- Branch 2 Name Heat Recovery Chiller Bypass Loop Demand Outlet Branch; !- Branch 3 Name Branch, Heat Recovery Chiller Bypass Loop Supply Inlet Branch, !- Name , !- Pressure Drop Curve Name Pump:VariableSpeed, !- Component 1 Object Type Heat Recovery Chiller Bypass Loop Pump, !- Component 1 Name Heat Recovery Chiller Bypass Loop Pump Inlet, !- Component 1 Inlet Node Name Heat Recovery Chiller Bypass Loop Pump Outlet; !- Component 1 Outlet Node Name Branch, Heat Recovery Chiller Bypass Loop Supply Equipment Branch, !- Name , !- Pressure Drop Curve Name Chiller:Electric:EIR, !- Component 1 Object Type Heat Recovery Chiller, !- Component 1 Name Heat Recovery Chiller Inlet, !- Component 1 Inlet Node Name Heat Recovery Chiller Outlet; !- Component 1 Outlet Node Name Branch, Heat Recovery Chiller Bypass Loop Supply Outlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type Heat Recovery Chiller Bypass Loop Supply Outlet Pipe, !- Component 1 Name Heat Recovery Chiller Bypass Loop Supply Outlet Pipe Inlet, !- Component 1 Inlet Node Name Heat Recovery Chiller Bypass Loop Supply Outlet Pipe Outlet; !- Component 1 Outlet Node Name Branch, Heat Recovery Chiller Bypass Loop Demand Inlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type Heat Recovery Chiller Bypass Loop Demand Inlet Pipe, !- Component 1 Name Heat Recovery Chiller Bypass Loop Demand Inlet Pipe Inlet, !- Component 1 Inlet Node Name Heat Recovery Chiller Bypass Loop Demand Inlet Pipe Outlet; !- Component 1 Outlet Node Name Branch, Heat Recovery Chiller Bypass Loop Demand Outlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type Heat Recovery Chiller Bypass Loop Demand Outlet Pipe, !- Component 1 Name Heat Recovery Chiller Bypass Loop Demand Outlet Pipe Inlet, !- Component 1 Inlet Node Name Heat Recovery Chiller Bypass Loop Demand Outlet Pipe Outlet; !- Component 1 Outlet Node Name Branch, Heat Recovery Chiller Bypass Loop Demand Load Branch, !- Name , !- Pressure Drop Curve Name HeatExchanger:FluidToFluid, !- Component 1 Object Type Heat Recovery Chiller Bypass Heat Exchanger, !- Component 1 Name Heat Recovery Chiller Bypass Heat Exchanger Demand Side Inlet, !- Component 1 Inlet Node Name Heat Recovery Chiller Bypass Heat Exchanger Demand Side Outlet; !- Component 1 Outlet Node Name BranchList, Heat Recovery Supply Side Branches, !- Name Heat Recovery Supply Inlet Branch, !- Branch 1 Name Dummy Water Heater Branch, !- Branch 2 Name Heat Recovery Supply Outlet Branch; !- Branch 3 Name BranchList, Heat Recovery Demand Side Branches, !- Name Heat Recovery Inlet Branch, !- Branch 1 Name Heat Recovery Chiller HR Branch, !- Branch 2 Name Heat Recovery Bypass Branch, !- Branch 3 Name Heat Recovery Outlet Branch; !- Branch 4 Name Branch, TowerWaterSys Demand Load Branch 3, !- Name , !- Pressure Drop Curve Name Chiller:Electric:EIR, !- Component 1 Object Type Heat Recovery Chiller, !- Component 1 Name Heat Recovery Chiller Condenser Inlet, !- Component 1 Inlet Node Name Heat Recovery Chiller Condenser Outlet; !- Component 1 Outlet Node Name Branch, Heat Recovery Supply Inlet Branch, !- Name , !- Pressure Drop Curve Name Pump:VariableSpeed, !- Component 1 Object Type Heat Recovery Circ Pump, !- Component 1 Name Heat Recovery Supply Inlet Node, !- Component 1 Inlet Node Name Heat Recovery Pump Outlet Node; !- Component 1 Outlet Node Name Branch, Dummy Water Heater Branch, !- Name , !- Pressure Drop Curve Name WaterHeater:Mixed, !- Component 1 Object Type Dummy Water Heater, !- Component 1 Name Dummy Water Heater Source Side Inlet Node, !- Component 1 Inlet Node Name Dummy Water Heater Source Side Outlet Node; !- Component 1 Outlet Node Name Branch, Heat Recovery Supply Outlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type Heat Recovery Supply Outlet, !- Component 1 Name Heat Recovery Supply Exit Pipe Inlet Node, !- Component 1 Inlet Node Name Heat Recovery Supply Outlet Node; !- Component 1 Outlet Node Name Branch, Heat Recovery Inlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type Heat Recovery Inlet Pipe,!- Component 1 Name Heat Recovery Demand Inlet Node, !- Component 1 Inlet Node Name Heat Recovery Demand Entrance Pipe Outlet Node; !- Component 1 Outlet Node Name Branch, Heat Recovery Chiller HR Branch, !- Name , !- Pressure Drop Curve Name Chiller:Electric:EIR, !- Component 1 Object Type Heat Recovery Chiller, !- Component 1 Name Heat Recovery Chiller HR Inlet Node,!- Component 1 Inlet Node Name Heat Recovery Chiller HR Outlet Node; !- Component 1 Outlet Node Name Branch, Heat Recovery Bypass Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type Heat Recovery Bypass, !- Component 1 Name Heat Recovery Bypass Inlet Node, !- Component 1 Inlet Node Name Heat Recovery Bypass Outlet Node; !- Component 1 Outlet Node Name Branch, Heat Recovery Outlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type Heat Recovery Outlet Pipe, !- Component 1 Name Heat Recovery Demand Exit Pipe Inlet Node, !- Component 1 Inlet Node Name Heat Recovery Demand Outlet Node; !- Component 1 Outlet Node Name Connector:Splitter, Heat Recovery Chiller Bypass Loop Supply Splitter, !- Name Heat Recovery Chiller Bypass Loop Supply Inlet Branch, !- Inlet Branch Name Heat Recovery Chiller Bypass Loop Supply Equipment Branch; !- Outlet Branch 1 Name Connector:Splitter, Heat Recovery Chiller Bypass Loop Demand Splitter, !- Name Heat Recovery Chiller Bypass Loop Demand Inlet Branch, !- Inlet Branch Name Heat Recovery Chiller Bypass Loop Demand Load Branch; !- Outlet Branch 1 Name Connector:Mixer, Heat Recovery Chiller Bypass Loop Supply Mixer, !- Name Heat Recovery Chiller Bypass Loop Supply Outlet Branch, !- Outlet Branch Name Heat Recovery Chiller Bypass Loop Supply Equipment Branch; !- Inlet Branch 1 Name Connector:Mixer, Heat Recovery Chiller Bypass Loop Demand Mixer, !- Name Heat Recovery Chiller Bypass Loop Demand Outlet Branch, !- Outlet Branch Name Heat Recovery Chiller Bypass Loop Demand Load Branch; !- Inlet Branch 1 Name ConnectorList, Heat Recovery Chiller Bypass Loop Supply Connectors, !- Name Connector:Splitter, !- Connector 1 Object Type Heat Recovery Chiller Bypass Loop Supply Splitter, !- Connector 1 Name Connector:Mixer, !- Connector 2 Object Type Heat Recovery Chiller Bypass Loop Supply Mixer; !- Connector 2 Name ConnectorList, Heat Recovery Chiller Bypass Loop Demand Connectors, !- Name Connector:Splitter, !- Connector 1 Object Type Heat Recovery Chiller Bypass Loop Demand Splitter, !- Connector 1 Name Connector:Mixer, !- Connector 2 Object Type Heat Recovery Chiller Bypass Loop Demand Mixer; !- Connector 2 Name !- =========== ALL OBJECTS IN CLASS: PIPE =========== Pipe:Adiabatic, SHWSys1 Supply Equipment Bypass Pipe, !- Name SHWSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name SHWSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name Pipe:Adiabatic, SHWSys1 Supply Outlet Pipe, !- Name SHWSys1 Supply Mixer-SHWSys1 Supply Outlet Pipe, !- Inlet Node Name SHWSys1 Supply Outlet Node; !- Outlet Node Name Pipe:Adiabatic, SHWSys1 Demand Inlet Pipe, !- Name SHWSys1 Demand Inlet Node, !- Inlet Node Name SHWSys1 Demand Inlet Pipe-SHWSys1 Demand Mixer; !- Outlet Node Name Pipe:Adiabatic, SHWSys1 Demand Bypass Pipe, !- Name SHWSys1 Demand Bypass Pipe Inlet Node, !- Inlet Node Name SHWSys1 Demand Bypass Pipe Outlet Node; !- Outlet Node Name Pipe:Adiabatic, SHWSys1 Demand Outlet Pipe, !- Name SHWSys1 Demand Mixer-SHWSys1 Demand Outlet Pipe, !- Inlet Node Name SHWSys1 Demand Outlet Node; !- Outlet Node Name Pipe:Adiabatic, HeatSys1 Supply Equipment Bypass Pipe, !- Name HeatSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name HeatSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name Pipe:Adiabatic, HeatSys1 Supply Outlet Pipe, !- Name HeatSys1 Supply Mixer-HeatSys1 Supply Outlet Pipe, !- Inlet Node Name HeatSys1 Supply Outlet Node; !- Outlet Node Name Pipe:Adiabatic, HeatSys1 Demand Inlet Pipe, !- Name HeatSys1 Demand Inlet Node, !- Inlet Node Name HeatSys1 Demand Inlet Pipe-HeatSys1 Demand Mixer; !- Outlet Node Name Pipe:Adiabatic, HeatSys1 Demand Bypass Pipe, !- Name HeatSys1 Demand Bypass Pipe Inlet Node, !- Inlet Node Name HeatSys1 Demand Bypass Pipe Outlet Node; !- Outlet Node Name Pipe:Adiabatic, HeatSys1 Demand Outlet Pipe, !- Name HeatSys1 Demand Mixer-HeatSys1 Demand Outlet Pipe, !- Inlet Node Name HeatSys1 Demand Outlet Node; !- Outlet Node Name Pipe:Adiabatic, CoolSys1 Supply Inlet Pipe, !- Name CoolSys1 Supply Inlet Node, !- Inlet Node Name CoolSys1 Pump-CoolSys1 ChillerNodeviaConnector; !- Outlet Node Name Pipe:Adiabatic, CoolSys1 Supply Equipment Bypass Pipe, !- Name CoolSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name CoolSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name Pipe:Adiabatic, CoolSys1 Supply Outlet Pipe, !- Name CoolSys1 Supply Mixer-CoolSys1 Supply Outlet Pipe, !- Inlet Node Name CoolSys1 Supply Outlet Node; !- Outlet Node Name Pipe:Adiabatic, CoolSys1 Demand Outlet Pipe, !- Name CoolSys1 Demand Mixer-CoolSys1 Demand Outlet Pipe, !- Inlet Node Name CoolSys1 Demand Outlet Node; !- Outlet Node Name Pipe:Adiabatic, TowerWaterSys Supply Equipment Bypass Pipe, !- Name TowerWaterSys Supply Equip Bypass Inlet Node, !- Inlet Node Name TowerWaterSys Supply Equip Bypass Outlet Node; !- Outlet Node Name Pipe:Adiabatic, TowerWaterSys Supply Outlet Pipe, !- Name TowerWaterSys Supply Mixer-TowerWaterSys Supply Outlet Pipe, !- Inlet Node Name TowerWaterSys Supply Outlet Node; !- Outlet Node Name Pipe:Adiabatic, TowerWaterSys Demand Inlet Pipe, !- Name TowerWaterSys Demand Inlet Node, !- Inlet Node Name TowerWaterSys Demand Inlet Pipe-TowerWaterSys Demand Mixer; !- Outlet Node Name Pipe:Adiabatic, TowerWaterSys Demand Bypass Pipe, !- Name TowerWaterSys Demand Bypass Pipe Inlet Node, !- Inlet Node Name TowerWaterSys Demand Bypass Pipe Outlet Node; !- Outlet Node Name Pipe:Adiabatic, TowerWaterSys Demand Outlet Pipe, !- Name TowerWaterSys Demand Mixer-TowerWaterSys Demand Outlet Pipe, !- Inlet Node Name TowerWaterSys Demand Outlet Node; !- Outlet Node Name Pipe:Adiabatic, CoolSys1 Supply Bypass, !- Name CoolSys1 Supply Bypass Inlet Node, !- Inlet Node Name CoolSys1 Supply Bypass Outlet Node; !- Outlet Node Name Pipe:Adiabatic, CoolSys1 Demand Bypass, !- Name CoolSys1 Demand Bypass Inlet Node, !- Inlet Node Name CoolSys1 Demand Bypass Outlet Node; !- Outlet Node Name Pipe:Adiabatic, CoolSys1 Supply Demand Side Inlet Pipe, !- Name CoolSys1 Supply Demand Side Inlet Pipe Inlet Node, !- Inlet Node Name CoolSys1 Supply Demand Side Inlet Pipe Outlet Node; !- Outlet Node Name Pipe:Adiabatic, CoolSys1 Supply Demand Side Outlet Pipe , !- Name CoolSys1 Supply Demand Side Outlet Pipe Inlet Node, !- Inlet Node Name CoolSys1 Supply Demand Side Outlet Pipe Outlet Node; !- Outlet Node Name Pipe:Adiabatic, CoolSys1 Demand Supply Side Outlet Pipe , !- Name CoolSys1 Demand Supply Side Outlet Pipe Inlet Node, !- Inlet Node Name CoolSys1 Demand Supply Side Outlet Pipe Outlet Node; !- Outlet Node Name Pipe:Adiabatic, CoolSys1 Demand Supply Side Inlet Pipe , !- Name CoolSys1 Demand Supply Side Inlet Pipe Inlet Node, !- Inlet Node Name CoolSys1 Demand Supply Side Inlet Pipe Outlet Node; !- Outlet Node Name Pipe:Adiabatic, Heat Recovery Supply Outlet, !- Name Heat Recovery Supply Exit Pipe Inlet Node, !- Inlet Node Name Heat Recovery Supply Outlet Node; !- Outlet Node Name Pipe:Adiabatic, Heat Recovery Inlet Pipe,!- Name Heat Recovery Demand Inlet Node, !- Inlet Node Name Heat Recovery Demand Entrance Pipe Outlet Node; !- Outlet Node Name Pipe:Adiabatic, Heat Recovery Bypass, !- Name Heat Recovery Bypass Inlet Node, !- Inlet Node Name Heat Recovery Bypass Outlet Node; !- Outlet Node Name Pipe:Adiabatic, Heat Recovery Outlet Pipe, !- Name Heat Recovery Demand Exit Pipe Inlet Node, !- Inlet Node Name Heat Recovery Demand Outlet Node; !- Outlet Node Name Pipe:Adiabatic, Heat Recovery Chiller Bypass Loop Supply Outlet Pipe, !- Name Heat Recovery Chiller Bypass Loop Supply Outlet Pipe Inlet, !- Inlet Node Name Heat Recovery Chiller Bypass Loop Supply Outlet Pipe Outlet; !- Outlet Node Name Pipe:Adiabatic, Heat Recovery Chiller Bypass Loop Demand Inlet Pipe, !- Name Heat Recovery Chiller Bypass Loop Demand Inlet Pipe Inlet, !- Inlet Node Name Heat Recovery Chiller Bypass Loop Demand Inlet Pipe Outlet; !- Outlet Node Name Pipe:Adiabatic, Heat Recovery Chiller Bypass Loop Demand Outlet Pipe, !- Name Heat Recovery Chiller Bypass Loop Demand Outlet Pipe Inlet, !- Inlet Node Name Heat Recovery Chiller Bypass Loop Demand Outlet Pipe Outlet; !- Outlet Node Name !- =========== ALL OBJECTS IN CLASS: PLANT LOOP =========== PlantLoop, SHWSys1, !- Name WATER, !- Fluid Type , !- User Defined Fluid Type SHWSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name SHWSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name 60.0, !- Maximum Loop Temperature {C} 10.0, !- Minimum Loop Temperature {C} AUTOSIZE, !- Maximum Loop Flow Rate {m3/s} 0.0, !- Minimum Loop Flow Rate {m3/s} AUTOSIZE, !- Plant Loop Volume {m3} SHWSys1 Supply Inlet Node, !- Plant Side Inlet Node Name SHWSys1 Supply Outlet Node, !- Plant Side Outlet Node Name SHWSys1 Supply Branches, !- Plant Side Branch List Name SHWSys1 Supply Connectors, !- Plant Side Connector List Name SHWSys1 Demand Inlet Node, !- Demand Side Inlet Node Name SHWSys1 Demand Outlet Node, !- Demand Side Outlet Node Name SHWSys1 Demand Branches, !- Demand Side Branch List Name SHWSys1 Demand Connectors, !- Demand Side Connector List Name Optimal; !- Load Distribution Scheme PlantLoop, HeatSys1, !- Name WATER, !- Fluid Type , !- User Defined Fluid Type HeatSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name HeatSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name 100.0, !- Maximum Loop Temperature {C} 10.0, !- Minimum Loop Temperature {C} AUTOSIZE, !- Maximum Loop Flow Rate {m3/s} 0.0, !- Minimum Loop Flow Rate {m3/s} AUTOSIZE, !- Plant Loop Volume {m3} HeatSys1 Supply Inlet Node, !- Plant Side Inlet Node Name HeatSys1 Supply Outlet Node, !- Plant Side Outlet Node Name HeatSys1 Supply Branches,!- Plant Side Branch List Name HeatSys1 Supply Connectors, !- Plant Side Connector List Name HeatSys1 Demand Inlet Node, !- Demand Side Inlet Node Name HeatSys1 Demand Outlet Node, !- Demand Side Outlet Node Name HeatSys1 Demand Branches,!- Demand Side Branch List Name HeatSys1 Demand Connectors, !- Demand Side Connector List Name Optimal; !- Load Distribution Scheme PlantLoop, CoolSys1_Supply, !- Name WATER, !- Fluid Type , !- User Defined Fluid Type CoolSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name CoolSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name 98.0, !- Maximum Loop Temperature {C} 1.0, !- Minimum Loop Temperature {C} AUTOSIZE, !- Maximum Loop Flow Rate {m3/s} 0.0, !- Minimum Loop Flow Rate {m3/s} autocalculate, !- Plant Loop Volume {m3} CoolSys1 Supply Inlet Node, !- Plant Side Inlet Node Name CoolSys1 Supply Outlet Node, !- Plant Side Outlet Node Name CoolSys1 Supply Supply Side Branches, !- Plant Side Branch List Name CoolSys1 Supply Supply Side Connectors, !- Plant Side Connector List Name CoolSys1 Supply Demand Side Inlet Pipe Inlet Node, !- Demand Side Inlet Node Name CoolSys1 Supply Demand Side Outlet Pipe Outlet Node, !- Demand Side Outlet Node Name CoolSys1 Supply Demand Side Branches, !- Demand Side Branch List Name CoolSys1 Supply Demand Side Connectors, !- Demand Side Connector List Name UniformLoad; !- Load Distribution Scheme PlantLoop, CoolSys1_Demand, !- Name Water, !- Fluid Type , !- User Defined Fluid Type CoolSys1 Sec Loop Operation, !- Plant Equipment Operation Scheme Name CoolSys1 Demand Inlet Node, !- Loop Temperature Setpoint Node Name 98, !- Maximum Loop Temperature {C} 1, !- Minimum Loop Temperature {C} autosize, !- Maximum Loop Flow Rate {m3/s} 0, !- Minimum Loop Flow Rate {m3/s} autocalculate, !- Plant Loop Volume {m3} CoolSys1 Demand Supply Side Inlet Pipe Inlet Node, !- Plant Side Inlet Node Name CoolSys1 Demand Supply Side Outlet Pipe Outlet Node, !- Plant Side Outlet Node Name CoolSys1 Demand Supply Side Branches, !- Plant Side Branch List Name CoolSys1 Demand Supply Side Connectors, !- Plant Side Connector List Name CoolSys1 Demand Inlet Node, !- Demand Side Inlet Node Name CoolSys1 Demand Outlet Node, !- Demand Side Outlet Node Name CoolSys1 Demand Demand Side Branches, !- Demand Side Branch List Name CoolSys1 Demand Demand Side Connectors, !- Demand Side Connector List Name UniformLoad; !- Load Distribution Scheme PlantLoop, Heat Recovery Water Loop,!- Name Water, !- Fluid Type , !- User Defined Fluid Type Heat Recovery Loop Operation, !- Plant Equipment Operation Scheme Name Heat Recovery Supply Outlet Node, !- Loop Temperature Setpoint Node Name 50, !- Maximum Loop Temperature {C} 10, !- Minimum Loop Temperature {C} autosize, !- Maximum Loop Flow Rate {m3/s} 0, !- Minimum Loop Flow Rate {m3/s} autocalculate, !- Plant Loop Volume {m3} Heat Recovery Supply Inlet Node, !- Plant Side Inlet Node Name Heat Recovery Supply Outlet Node, !- Plant Side Outlet Node Name Heat Recovery Supply Side Branches, !- Plant Side Branch List Name Heat Recovery Supply Side Connectors, !- Plant Side Connector List Name Heat Recovery Demand Inlet Node, !- Demand Side Inlet Node Name Heat Recovery Demand Outlet Node, !- Demand Side Outlet Node Name Heat Recovery Demand Side Branches, !- Demand Side Branch List Name Heat Recovery Demand Side Connectors, !- Demand Side Connector List Name Optimal; !- Load Distribution Scheme PlantLoop, Heat Recovery Chiller Bypass Loop, !- Name Water, !- Fluid Type , !- User Defined Fluid Type Heat Recovery Chiller Bypass Loop Operation, !- Plant Equipment Operation Scheme Name Heat Recovery Chiller Outlet, !- Loop Temperature Setpoint Node Name 50, !- Maximum Loop Temperature {C} 1, !- Minimum Loop Temperature {C} autosize, !- Maximum Loop Flow Rate {m3/s} 0, !- Minimum Loop Flow Rate {m3/s} autocalculate, !- Plant Loop Volume {m3} Heat Recovery Chiller Bypass Loop Pump Inlet, !- Plant Side Inlet Node Name Heat Recovery Chiller Bypass Loop Supply Outlet Pipe Outlet, !- Plant Side Outlet Node Name Heat Recovery Chiller Bypass Loop Supply Side Branches, !- Plant Side Branch List Name Heat Recovery Chiller Bypass Loop Supply Connectors, !- Plant Side Connector List Name Heat Recovery Chiller Bypass Loop Demand Inlet Pipe Inlet, !- Demand Side Inlet Node Name Heat Recovery Chiller Bypass Loop Demand Outlet Pipe Outlet, !- Demand Side Outlet Node Name Heat Recovery Chiller Bypass Loop Demand Side Branches, !- Demand Side Branch List Name Heat Recovery Chiller Bypass Loop Demand Connectors, !- Demand Side Connector List Name Optimal; !- Load Distribution Scheme !- =========== ALL OBJECTS IN CLASS: CONDENSER LOOP =========== !- Minimum and maximum Loop Temperatures are relaxed and not used to set the control or sizing limits. CondenserLoop, TowerWaterSys, !- Name Water, !- Fluid Type , !- User Defined Fluid Type TowerWaterSys Loop Operation Scheme List, !- Condenser Equipment Operation Scheme Name TowerWaterSys Supply Outlet Node, !- Condenser Loop Temperature Setpoint Node Name 80.0, !- Maximum Loop Temperature {C} 5.0, !- Minimum Loop Temperature {C} AUTOSIZE, !- Maximum Loop Flow Rate {m3/s} 0.0, !- Minimum Loop Flow Rate {m3/s} AUTOSIZE, !- Condenser Loop Volume {m3} TowerWaterSys Supply Inlet Node, !- Condenser Side Inlet Node Name TowerWaterSys Supply Outlet Node, !- Condenser Side Outlet Node Name TowerWaterSys Supply Branches, !- Condenser Side Branch List Name TowerWaterSys Supply Connectors, !- Condenser Side Connector List Name TowerWaterSys Demand Inlet Node, !- Demand Side Inlet Node Name TowerWaterSys Demand Outlet Node, !- Demand Side Outlet Node Name TowerWaterSys Demand Branches, !- Condenser Demand Side Branch List Name TowerWaterSys Demand Connectors, !- Condenser Demand Side Connector List Name SequentialLoad; !- Load Distribution Scheme !- =========== ALL OBJECTS IN CLASS: PLANT OPERATION SCHEMES =========== PlantEquipmentOperationSchemes, SHWSys1 Loop Operation Scheme List, !- Name PlantEquipmentOperation:HeatingLoad, !- Control Scheme 1 Object Type SHWSys1 Operation Scheme,!- Control Scheme 1 Name PlantOnSched; !- Control Scheme 1 Schedule Name PlantEquipmentOperationSchemes, HeatSys1 Loop Operation Scheme List, !- Name PlantEquipmentOperation:HeatingLoad, !- Control Scheme 1 Object Type HeatSys1 Operation Scheme, !- Control Scheme 1 Name PlantOnSched; !- Control Scheme 1 Schedule Name PlantEquipmentOperationSchemes, CoolSys1 Loop Operation Scheme List, !- Name PlantEquipmentOperation:CoolingLoad, !- Control Scheme 1 Object Type CoolSys1 Operation Scheme, !- Control Scheme 1 Name PlantOnSched; !- Control Scheme 1 Schedule Name PlantEquipmentOperationSchemes, CoolSys1 Sec Loop Operation, !- Name PlantEquipmentOperation:CoolingLoad, !- Control Scheme 1 Object Type CoolSys1 Sec Operation Scheme, !- Control Scheme 1 Name PlantOnSched; !- Control Scheme 1 Schedule Name PlantEquipmentOperationSchemes, Heat Recovery Loop Operation, !- Name PlantEquipmentOperation:HeatingLoad, !- Control Scheme 1 Object Type Dummy Water Heater Only, !- Control Scheme 1 Name PlantOnSched; !- Control Scheme 1 Schedule Name PlantEquipmentOperationSchemes, Heat Recovery Chiller Bypass Loop Operation, !- Name PlantEquipmentOperation:CoolingLoad, !- Control Scheme 1 Object Type Heat Recovery Chiller, !- Control Scheme 1 Name PlantOnSched; !- Control Scheme 1 Schedule Name !- =========== ALL OBJECTS IN CLASS: CONDENSER OPERATION SCHEMES =========== CondenserEquipmentOperationSchemes, TowerWaterSys Loop Operation Scheme List, !- Name PlantEquipmentOperation:CoolingLoad, !- Control Scheme 1 Object Type TowerWaterSys Operation Scheme, !- Control Scheme 1 Name PlantOnSched; !- Control Scheme 1 Schedule Name !- =========== ALL OBJECTS IN CLASS: COOLING LOAD RANGE BASED OPERATION =========== PlantEquipmentOperation:CoolingLoad, Heat Recovery Chiller, !- Name 0.0, !- Load Range 1 Lower Limit {W} 100000000000000, !- Load Range 1 Upper Limit {W} Heat Recovery Equipment List; !- Range 1 Equipment List Name PlantEquipmentOperation:CoolingLoad, CoolSys1 Operation Scheme, !- Name 0.0, !- Load Range 1 Lower Limit {W} 944335.99, !- Load Range 1 Upper Limit {W} CoolSys1 Equipment List 1, !- Range 1 Equipment List Name 944335.99, !- Load Range 2 Lower Limit {W} 100000000000000, !- Load Range 2 Upper Limit {W} CoolSys1 Equipment List 2; !- Range 2 Equipment List Name PlantEquipmentOperation:CoolingLoad, CoolSys1 Sec Operation Scheme, !- Name 0, !- Load Range 1 Lower Limit {W} 944335.99, !- Load Range 1 Upper Limit {W} CoolSys1 HeatExchanger; !- Range 1 Equipment List Name PlantEquipmentOperation:CoolingLoad, TowerWaterSys Operation Scheme, !- Name 0.0, !- Load Range 1 Lower Limit {W} 944335.99, !- Load Range 1 Upper Limit {W} TowerWaterSys Equipment List 1, !- Range 1 Equipment List Name 944335.99, !- Load Range 2 Lower Limit {W} 100000000000000, !- Load Range 2 Upper Limit {W} TowerWaterSys Equipment List 2; !- Range 2 Equipment List Name !- =========== ALL OBJECTS IN CLASS: HEATING LOAD RANGE BASED OPERATION =========== PlantEquipmentOperation:HeatingLoad, SHWSys1 Operation Scheme,!- Name 0.0, !- Load Range 1 Lower Limit {W} 1000000000000000, !- Load Range 1 Upper Limit {W} SHWSys1 Equipment List; !- Range 1 Equipment List Name PlantEquipmentOperation:HeatingLoad, HeatSys1 Operation Scheme, !- Name 0.0, !- Load Range 1 Lower Limit {W} 1000000000000000, !- Load Range 1 Upper Limit {W} HeatSys1 Equipment List; !- Range 1 Equipment List Name PlantEquipmentOperation:HeatingLoad, Dummy Water Heater Only, !- Name 0, !- Load Range 1 Lower Limit {W} 1000000000000000, !- Load Range 1 Upper Limit {W} Heat Recovery Plant Equipment List; !- Range 1 Equipment List Name !- =========== ALL OBJECTS IN CLASS: PLANT EQUIPMENT LIST =========== PlantEquipmentList, SHWSys1 Equipment List, !- Name WaterHeater:Mixed, !- Equipment 1 Object Type SHWSys1 Water Heater; !- Equipment 1 Name PlantEquipmentList, HeatSys1 Equipment List, !- Name Boiler:HotWater, !- Equipment 1 Object Type HeatSys1 Boiler; !- Equipment 1 Name PlantEquipmentList, CoolSys1 Equipment List 1, !- Name Chiller:Electric:ReformulatedEIR, !- Equipment 1 Object Type CoolSys1 Chiller1; !- Equipment 1 Name PlantEquipmentList, CoolSys1 Equipment List 2, !- Name Chiller:Electric:ReformulatedEIR, !- Equipment 1 Object Type CoolSys1 Chiller1, !- Equipment 1 Name Chiller:Electric:ReformulatedEIR, !- Equipment 2 Object Type CoolSys1 Chiller2; !- Equipment 2 Name PlantEquipmentList, CoolSys1 HeatExchanger, !- Name HeatExchanger:FluidToFluid, !- Equipment 1 Object Type Bypass Heat Exchanger ; !- Equipment 1 Name PlantEquipmentList, Heat Recovery Plant Equipment List, !- Name WaterHeater:Mixed, !- Equipment 1 Object Type Dummy Water Heater; !- Equipment 1 Name PlantEquipmentList, Heat Recovery Equipment List, !- Name Chiller:Electric:EIR, !- Equipment 1 Object Type Heat Recovery Chiller; !- Equipment 1 Name PlantEquipmentList, Bypass Heat Exchanger , !- Name HeatExchanger:FluidToFluid, !- Equipment 1 Object Type Bypass Heat Exchanger ; !- Equipment 1 Name !- =========== ALL OBJECTS IN CLASS: CONDENSER EQUIPMENT LIST =========== CondenserEquipmentList, TowerWaterSys Equipment List 1, !- Name CoolingTower:VariableSpeed, !- Equipment 1 Object Type TowerWaterSys CoolTower 1; !- Equipment 1 Name CondenserEquipmentList, TowerWaterSys Equipment List 2, !- Name CoolingTower:VariableSpeed, !- Equipment 1 Object Type TowerWaterSys CoolTower 1, !- Equipment 1 Name CoolingTower:VariableSpeed, !- Equipment 2 Object Type TowerWaterSys CoolTower 2; !- Equipment 2 Name !- =========== ALL OBJECTS IN CLASS: CONNECTOR:SPLITTER =========== Connector:Splitter, Heat Recovery Supply Splitter, !- Name Heat Recovery Supply Inlet Branch, !- Inlet Branch Name Dummy Water Heater Branch; !- Outlet Branch 1 Name Connector:Splitter, Heat Recovery Splitter, !- Name Heat Recovery Inlet Branch, !- Inlet Branch Name Heat Recovery Chiller HR Branch, !- Outlet Branch 1 Name Heat Recovery Bypass Branch; !- Outlet Branch 2 Name Connector:Splitter, SHWSys1 Supply Splitter, !- Name SHWSys1 Supply Inlet Branch, !- Inlet Branch Name SHWSys1 Supply Equipment Branch, !- Outlet Branch 1 Name SHWSys1 Supply Equipment Bypass Branch; !- Outlet Branch 2 Name Connector:Splitter, SHWSys1 Demand Splitter, !- Name SHWSys1 Demand Inlet Branch, !- Inlet Branch Name SHWSys1 Demand Load Branch 1, !- Outlet Branch 1 Name SHWSys1 Demand Load Branch 2, !- Outlet Branch 2 Name SHWSys1 Demand Load Branch 3, !- Outlet Branch 3 Name SHWSys1 Demand Load Branch 4, !- Outlet Branch 4 Name SHWSys1 Demand Load Branch 5, !- Outlet Branch 5 Name SHWSys1 Demand Load Branch 6, !- Outlet Branch 6 Name SHWSys1 Demand Load Branch 7, !- Outlet Branch 7 Name SHWSys1 Demand Load Branch 8, !- Outlet Branch 8 Name SHWSys1 Demand Load Branch 9, !- Outlet Branch 9 Name SHWSys1 Demand Load Branch 10, !- Outlet Branch 10 Name SHWSys1 Demand Load Branch 11, !- Outlet Branch 11 Name SHWSys1 Demand Load Branch 12, !- Outlet Branch 12 Name SHWSys1 Demand Load Branch 13, !- Outlet Branch 13 Name SHWSys1 Demand Load Branch 14, !- Outlet Branch 14 Name SHWSys1 Demand Load Branch 15, !- Outlet Branch 15 Name SHWSys1 Demand Load Branch 16, !- Outlet Branch 16 Name SHWSys1 Demand Load Branch 17, !- Outlet Branch 17 Name SHWSys1 Demand Load Branch 18, !- Outlet Branch 18 Name SHWSys1 Demand Load Branch 19, !- Outlet Branch 19 Name SHWSys1 Demand Load Branch 20, !- Outlet Branch 20 Name SHWSys1 Demand Load Branch 21, !- Outlet Branch 21 Name SHWSys1 Demand Load Branch 22, !- Outlet Branch 22 Name SHWSys1 Demand Load Branch 23, !- Outlet Branch 23 Name SHWSys1 Demand Load Branch 24, !- Outlet Branch 24 Name SHWSys1 Demand Load Branch 25, !- Outlet Branch 25 Name SHWSys1 Demand Load Branch 26, !- Outlet Branch 26 Name SHWSys1 Demand Load Branch 27, !- Outlet Branch 27 Name SHWSys1 Demand Load Branch 28, !- Outlet Branch 28 Name SHWSys1 Demand Load Branch 29, !- Outlet Branch 29 Name SHWSys1 Demand Load Branch 30, !- Outlet Branch 30 Name SHWSys1 Demand Bypass Branch; !- Outlet Branch 31 Name Connector:Splitter, HeatSys1 Supply Splitter,!- Name HeatSys1 Supply Inlet Branch, !- Inlet Branch Name HeatSys1 Supply Equipment Branch, !- Outlet Branch 1 Name HeatSys1 Supply Equipment Bypass Branch; !- Outlet Branch 2 Name Connector:Splitter, HeatSys1 Demand Splitter,!- Name HeatSys1 Demand Inlet Branch, !- Inlet Branch Name HeatSys1 Demand Load Branch 1, !- Outlet Branch 1 Name HeatSys1 Demand Load Branch 2, !- Outlet Branch 2 Name HeatSys1 Demand Load Branch 3, !- Outlet Branch 3 Name HeatSys1 Demand Load Branch 4, !- Outlet Branch 4 Name HeatSys1 Demand Load Branch 5, !- Outlet Branch 5 Name HeatSys1 Demand Load Branch 6, !- Outlet Branch 6 Name HeatSys1 Demand Load Branch 7, !- Outlet Branch 7 Name HeatSys1 Demand Load Branch 8, !- Outlet Branch 8 Name HeatSys1 Demand Load Branch 9, !- Outlet Branch 9 Name HeatSys1 Demand Load Branch 10, !- Outlet Branch 10 Name HeatSys1 Demand Load Branch 11, !- Outlet Branch 11 Name HeatSys1 Demand Load Branch 12, !- Outlet Branch 12 Name HeatSys1 Demand Load Branch 13, !- Outlet Branch 13 Name HeatSys1 Demand Load Branch 14, !- Outlet Branch 14 Name HeatSys1 Demand Load Branch 15, !- Outlet Branch 15 Name HeatSys1 Demand Load Branch 16, !- Outlet Branch 16 Name HeatSys1 Demand Load Branch 17, !- Outlet Branch 17 Name HeatSys1 Demand Load Branch 18, !- Outlet Branch 18 Name HeatSys1 Demand Load Branch 19, !- Outlet Branch 19 Name HeatSys1 Demand Load Branch 20, !- Outlet Branch 20 Name HeatSys1 Demand Load Branch 21, !- Outlet Branch 21 Name HeatSys1 Demand Load Branch 22, !- Outlet Branch 22 Name HeatSys1 Demand Load Branch 23, !- Outlet Branch 23 Name HeatSys1 Demand Load Branch 24, !- Outlet Branch 24 Name HeatSys1 Demand Load Branch 25, !- Outlet Branch 25 Name HeatSys1 Demand Load Branch 26, !- Outlet Branch 26 Name HeatSys1 Demand Load Branch 27, !- Outlet Branch 27 Name HeatSys1 Demand Load Branch 28, !- Outlet Branch 28 Name HeatSys1 Demand Load Branch 29, !- Outlet Branch 29 Name HeatSys1 Demand Load Branch 30, !- Outlet Branch 30 Name HeatSys1 Demand Load Branch 31, !- Outlet Branch 31 Name HeatSys1 Demand Load Branch 32, !- Outlet Branch 32 Name HeatSys1 Demand Load Branch 33, !- Outlet Branch 33 Name HeatSys1 Demand Load Branch 34, !- Outlet Branch 34 Name HeatSys1 Demand Load Branch 35, !- Outlet Branch 35 Name HeatSys1 Demand Load Branch 36, !- Outlet Branch 36 Name HeatSys1 Demand Load Branch 37, !- Outlet Branch 37 Name HeatSys1 Demand Load Branch 38, !- Outlet Branch 38 Name HeatSys1 Demand Load Branch 39, !- Outlet Branch 39 Name HeatSys1 Demand Load Branch 40, !- Outlet Branch 40 Name HeatSys1 Demand Load Branch 41, !- Outlet Branch 41 Name HeatSys1 Demand Load Branch 42, !- Outlet Branch 42 Name HeatSys1 Demand Load Branch 43, !- Outlet Branch 43 Name HeatSys1 Demand Load Branch 44, !- Outlet Branch 44 Name HeatSys1 Demand Load Branch 45, !- Outlet Branch 45 Name HeatSys1 Demand Load Branch 46, !- Outlet Branch 46 Name HeatSys1 Demand Load Branch 47, !- Outlet Branch 47 Name HeatSys1 Demand Load Branch 48, !- Outlet Branch 48 Name HeatSys1 Demand Load Branch 49, !- Outlet Branch 49 Name HeatSys1 Demand Load Branch 50, !- Outlet Branch 50 Name HeatSys1 Demand Load Branch 51, !- Outlet Branch 51 Name HeatSys1 Demand Load Branch 52, !- Outlet Branch 52 Name HeatSys1 Demand Load Branch 53, !- Outlet Branch 53 Name HeatSys1 Demand Load Branch 54, !- Outlet Branch 54 Name HeatSys1 Demand Load Branch 55, !- Outlet Branch 55 Name HeatSys1 Demand Load Branch 56, !- Outlet Branch 56 Name HeatSys1 Demand Load Branch 57, !- Outlet Branch 57 Name HeatSys1 Demand Load Branch 58, !- Outlet Branch 58 Name HeatSys1 Demand Load Branch 59, !- Outlet Branch 59 Name HeatSys1 Demand Load Branch 60, !- Outlet Branch 60 Name HeatSys1 Demand Load Branch 61, !- Outlet Branch 61 Name HeatSys1 Demand Load Branch 62, !- Outlet Branch 62 Name HeatSys1 Demand Load Branch 63, !- Outlet Branch 63 Name HeatSys1 Demand Load Branch 64, !- Outlet Branch 64 Name HeatSys1 Demand Load Branch 65, !- Outlet Branch 65 Name HeatSys1 Demand Load Branch 66, !- Outlet Branch 66 Name HeatSys1 Demand Load Branch 67, !- Outlet Branch 67 Name HeatSys1 Demand Bypass Branch; !- Outlet Branch 68 Name Connector:Splitter, CoolSys1 Supply Supply Side Splitter,!- Name CoolSys1 Supply Inlet Branch, !- Inlet Branch Name CoolSys1 Supply Equipment Branch 1, !- Outlet Branch 1 Name CoolSys1 Supply Equipment Branch 2, !- Outlet Branch 2 Name CoolSys1 Supply Equipment Bypass Branch; !- Outlet Branch 3 Name Connector:Splitter, CoolSys1 Demand Demand Side Splitter,!- Name CoolSys1 Demand Inlet Branch, !- Inlet Branch Name CoolSys1 Demand Load Branch 1, !- Outlet Branch 1 Name CoolSys1 Demand Load Branch 2, !- Outlet Branch 2 Name CoolSys1 Demand Load Branch 3, !- Outlet Branch 3 Name CoolSys1 Demand Load Branch 4, !- Outlet Branch 4 Name CoolSys1 Demand Load Branch 5, !- Outlet Branch 5 Name CoolSys1 Demand Load Branch 6, !- Outlet Branch 6 Name CoolSys1 Demand Load Branch 7, !- Outlet Branch 7 Name CoolSys1 Demand Load Branch 8; !- Outlet Branch 8 Name Connector:Splitter, TowerWaterSys Supply Splitter, !- Name TowerWaterSys Supply Inlet Branch, !- Inlet Branch Name TowerWaterSys Supply Equipment Branch 1, !- Outlet Branch 1 Name TowerWaterSys Supply Equipment Branch 2, !- Outlet Branch 2 Name TowerWaterSys Supply Equipment Bypass Branch; !- Outlet Branch 3 Name Connector:Splitter, TowerWaterSys Demand Splitter, !- Name TowerWaterSys Demand Inlet Branch, !- Inlet Branch Name TowerWaterSys Demand Load Branch 1, !- Outlet Branch 1 Name TowerWaterSys Demand Load Branch 2, !- Outlet Branch 2 Name TowerWaterSys Demand Load Branch 3, !- Outlet Branch Name TowerWaterSys Demand Bypass Branch; !- Outlet Branch 3 Name Connector:Splitter, CoolSys1 Supply Demand Side Splitter, !- Name CoolSys1 Supply Demand Side Inlet Branch, !- Inlet Branch Name CoolSys1 Heat Exchanger Supply Branch, !- Outlet Branch 1 Name CoolSys1 Supply Side Bypass; !- Outlet Branch 2 Name Connector:Splitter, CoolSys1 Demand Supply Side Splitter, !- Name CoolSys1 Demand Supply Side Inlet Branch, !- Inlet Branch Name CoolSys1 Heat Exchanger Demand Branch, !- Outlet Branch 1 Name CoolSys1 Demand Side Bypass; !- Outlet Branch 2 Name !- =========== ALL OBJECTS IN CLASS: CONNECTOR:MIXER =========== Connector:Mixer, Heat Recovery Supply Mixer, !- Name Heat Recovery Supply Outlet Branch, !- Outlet Branch Name Dummy Water Heater Branch; !- Inlet Branch 1 Name Connector:Mixer, Heat Recovery Mixer, !- Name Heat Recovery Outlet Branch, !- Outlet Branch Name Heat Recovery Chiller HR Branch, !- Inlet Branch 1 Name Heat Recovery Bypass Branch; !- Inlet Branch 2 Name Connector:Mixer, SHWSys1 Supply Mixer, !- Name SHWSys1 Supply Outlet Branch, !- Outlet Branch Name SHWSys1 Supply Equipment Branch, !- Inlet Branch 1 Name SHWSys1 Supply Equipment Bypass Branch; !- Inlet Branch 2 Name Connector:Mixer, SHWSys1 Demand Mixer, !- Name SHWSys1 Demand Outlet Branch, !- Outlet Branch Name SHWSys1 Demand Load Branch 1, !- Inlet Branch 1 Name SHWSys1 Demand Load Branch 2, !- Inlet Branch 2 Name SHWSys1 Demand Load Branch 3, !- Inlet Branch 3 Name SHWSys1 Demand Load Branch 4, !- Inlet Branch 4 Name SHWSys1 Demand Load Branch 5, !- Inlet Branch 5 Name SHWSys1 Demand Load Branch 6, !- Inlet Branch 6 Name SHWSys1 Demand Load Branch 7, !- Inlet Branch 7 Name SHWSys1 Demand Load Branch 8, !- Inlet Branch 8 Name SHWSys1 Demand Load Branch 9, !- Inlet Branch 9 Name SHWSys1 Demand Load Branch 10, !- Inlet Branch 10 Name SHWSys1 Demand Load Branch 11, !- Inlet Branch 11 Name SHWSys1 Demand Load Branch 12, !- Inlet Branch 12 Name SHWSys1 Demand Load Branch 13, !- Inlet Branch 13 Name SHWSys1 Demand Load Branch 14, !- Inlet Branch 14 Name SHWSys1 Demand Load Branch 15, !- Inlet Branch 15 Name SHWSys1 Demand Load Branch 16, !- Inlet Branch 16 Name SHWSys1 Demand Load Branch 17, !- Inlet Branch 17 Name SHWSys1 Demand Load Branch 18, !- Inlet Branch 18 Name SHWSys1 Demand Load Branch 19, !- Inlet Branch 19 Name SHWSys1 Demand Load Branch 20, !- Inlet Branch 20 Name SHWSys1 Demand Load Branch 21, !- Inlet Branch 21 Name SHWSys1 Demand Load Branch 22, !- Inlet Branch 22 Name SHWSys1 Demand Load Branch 23, !- Inlet Branch 23 Name SHWSys1 Demand Load Branch 24, !- Inlet Branch 24 Name SHWSys1 Demand Load Branch 25, !- Inlet Branch 25 Name SHWSys1 Demand Load Branch 26, !- Inlet Branch 26 Name SHWSys1 Demand Load Branch 27, !- Inlet Branch 27 Name SHWSys1 Demand Load Branch 28, !- Inlet Branch 28 Name SHWSys1 Demand Load Branch 29, !- Inlet Branch 29 Name SHWSys1 Demand Load Branch 30, !- Inlet Branch 30 Name SHWSys1 Demand Bypass Branch; !- Inlet Branch 31 Name Connector:Mixer, HeatSys1 Supply Mixer, !- Name HeatSys1 Supply Outlet Branch, !- Outlet Branch Name HeatSys1 Supply Equipment Branch, !- Inlet Branch 1 Name HeatSys1 Supply Equipment Bypass Branch; !- Inlet Branch 2 Name Connector:Mixer, HeatSys1 Demand Mixer, !- Name HeatSys1 Demand Outlet Branch, !- Outlet Branch Name HeatSys1 Demand Load Branch 1, !- Inlet Branch 1 Name HeatSys1 Demand Load Branch 2, !- Inlet Branch 2 Name HeatSys1 Demand Load Branch 3, !- Inlet Branch 3 Name HeatSys1 Demand Load Branch 4, !- Inlet Branch 4 Name HeatSys1 Demand Load Branch 5, !- Inlet Branch 5 Name HeatSys1 Demand Load Branch 6, !- Inlet Branch 6 Name HeatSys1 Demand Load Branch 7, !- Inlet Branch 7 Name HeatSys1 Demand Load Branch 8, !- Inlet Branch 8 Name HeatSys1 Demand Load Branch 9, !- Inlet Branch 9 Name HeatSys1 Demand Load Branch 10, !- Inlet Branch 10 Name HeatSys1 Demand Load Branch 11, !- Inlet Branch 11 Name HeatSys1 Demand Load Branch 12, !- Inlet Branch 12 Name HeatSys1 Demand Load Branch 13, !- Inlet Branch 13 Name HeatSys1 Demand Load Branch 14, !- Inlet Branch 14 Name HeatSys1 Demand Load Branch 15, !- Inlet Branch 15 Name HeatSys1 Demand Load Branch 16, !- Inlet Branch 16 Name HeatSys1 Demand Load Branch 17, !- Inlet Branch 17 Name HeatSys1 Demand Load Branch 18, !- Inlet Branch 18 Name HeatSys1 Demand Load Branch 19, !- Inlet Branch 19 Name HeatSys1 Demand Load Branch 20, !- Inlet Branch 20 Name HeatSys1 Demand Load Branch 21, !- Inlet Branch 21 Name HeatSys1 Demand Load Branch 22, !- Inlet Branch 22 Name HeatSys1 Demand Load Branch 23, !- Inlet Branch 23 Name HeatSys1 Demand Load Branch 24, !- Inlet Branch 24 Name HeatSys1 Demand Load Branch 25, !- Inlet Branch 25 Name HeatSys1 Demand Load Branch 26, !- Inlet Branch 26 Name HeatSys1 Demand Load Branch 27, !- Inlet Branch 27 Name HeatSys1 Demand Load Branch 28, !- Inlet Branch 28 Name HeatSys1 Demand Load Branch 29, !- Inlet Branch 29 Name HeatSys1 Demand Load Branch 30, !- Inlet Branch 30 Name HeatSys1 Demand Load Branch 31, !- Inlet Branch 31 Name HeatSys1 Demand Load Branch 32, !- Inlet Branch 32 Name HeatSys1 Demand Load Branch 33, !- Inlet Branch 33 Name HeatSys1 Demand Load Branch 34, !- Inlet Branch 34 Name HeatSys1 Demand Load Branch 35, !- Inlet Branch 35 Name HeatSys1 Demand Load Branch 36, !- Inlet Branch 36 Name HeatSys1 Demand Load Branch 37, !- Inlet Branch 37 Name HeatSys1 Demand Load Branch 38, !- Inlet Branch 38 Name HeatSys1 Demand Load Branch 39, !- Inlet Branch 39 Name HeatSys1 Demand Load Branch 40, !- Inlet Branch 40 Name HeatSys1 Demand Load Branch 41, !- Inlet Branch 41 Name HeatSys1 Demand Load Branch 42, !- Inlet Branch 42 Name HeatSys1 Demand Load Branch 43, !- Inlet Branch 43 Name HeatSys1 Demand Load Branch 44, !- Inlet Branch 44 Name HeatSys1 Demand Load Branch 45, !- Inlet Branch 45 Name HeatSys1 Demand Load Branch 46, !- Inlet Branch 46 Name HeatSys1 Demand Load Branch 47, !- Inlet Branch 47 Name HeatSys1 Demand Load Branch 48, !- Inlet Branch 48 Name HeatSys1 Demand Load Branch 49, !- Inlet Branch 49 Name HeatSys1 Demand Load Branch 50, !- Inlet Branch 50 Name HeatSys1 Demand Load Branch 51, !- Inlet Branch 51 Name HeatSys1 Demand Load Branch 52, !- Inlet Branch 52 Name HeatSys1 Demand Load Branch 53, !- Inlet Branch 53 Name HeatSys1 Demand Load Branch 54, !- Inlet Branch 54 Name HeatSys1 Demand Load Branch 55, !- Inlet Branch 55 Name HeatSys1 Demand Load Branch 56, !- Inlet Branch 56 Name HeatSys1 Demand Load Branch 57, !- Inlet Branch 57 Name HeatSys1 Demand Load Branch 58, !- Inlet Branch 58 Name HeatSys1 Demand Load Branch 59, !- Inlet Branch 59 Name HeatSys1 Demand Load Branch 60, !- Inlet Branch 60 Name HeatSys1 Demand Load Branch 61, !- Inlet Branch 61 Name HeatSys1 Demand Load Branch 62, !- Inlet Branch 62 Name HeatSys1 Demand Load Branch 63, !- Inlet Branch 63 Name HeatSys1 Demand Load Branch 64, !- Inlet Branch 64 Name HeatSys1 Demand Load Branch 65, !- Inlet Branch 65 Name HeatSys1 Demand Load Branch 66, !- Inlet Branch 66 Name HeatSys1 Demand Load Branch 67, !- Inlet Branch 67 Name HeatSys1 Demand Bypass Branch; !- Inlet Branch 68 Name Connector:Mixer, CoolSys1 Supply Supply Side Mixer, !- Name CoolSys1 Supply Outlet Branch, !- Outlet Branch Name CoolSys1 Supply Equipment Branch 1, !- Inlet Branch 1 Name CoolSys1 Supply Equipment Branch 2, !- Inlet Branch 2 Name CoolSys1 Supply Equipment Bypass Branch; !- Inlet Branch 3 Name Connector:Mixer, CoolSys1 Demand Demand Side Mixer, !- Name CoolSys1 Demand Outlet Branch, !- Outlet Branch Name CoolSys1 Demand Load Branch 1, !- Inlet Branch 1 Name CoolSys1 Demand Load Branch 2, !- Inlet Branch 2 Name CoolSys1 Demand Load Branch 3, !- Inlet Branch 3 Name CoolSys1 Demand Load Branch 4, !- Inlet Branch 4 Name CoolSys1 Demand Load Branch 5, !- Inlet Branch 5 Name CoolSys1 Demand Load Branch 6, !- Inlet Branch 6 Name CoolSys1 Demand Load Branch 7, !- Inlet Branch 7 Name CoolSys1 Demand Load Branch 8; !- Inlet Branch 8 Name Connector:Mixer, TowerWaterSys Supply Mixer, !- Name TowerWaterSys Supply Outlet Branch, !- Outlet Branch Name TowerWaterSys Supply Equipment Branch 1, !- Inlet Branch 1 Name TowerWaterSys Supply Equipment Branch 2, !- Inlet Branch 2 Name TowerWaterSys Supply Equipment Bypass Branch; !- Inlet Branch 3 Name Connector:Mixer, TowerWaterSys Demand Mixer, !- Name TowerWaterSys Demand Outlet Branch, !- Outlet Branch Name TowerWaterSys Demand Load Branch 1, !- Inlet Branch 1 Name TowerWaterSys Demand Load Branch 2, !- Inlet Branch 2 Name TowerWaterSys Demand Load Branch 3, !- Inlet Branch Name TowerWaterSys Demand Bypass Branch; !- Inlet Branch 3 Name Connector:Mixer, CoolSys1 Supply Demand Side Mixer, !- Name CoolSys1 Supply Demand Side Outlet Branch, !- Outlet Branch Name CoolSys1 Heat Exchanger Supply Branch, !- Inlet Branch 1 Name CoolSys1 Supply Side Bypass; !- Inlet Branch 2 Name Connector:Mixer, CoolSys1 Demand Supply Side Mixer, !- Name CoolSys1 Demand Supply Side Outlet Branch, !- Outlet Branch Name CoolSys1 Heat Exchanger Demand Branch, !- Inlet Branch 1 Name CoolSys1 Demand Side Bypass; !- Inlet Branch 2 Name !- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC =========== AirLoopHVAC, VAV_1, !- Name VAV_1_Controllers, !- Controller List Name VAV_1 Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} VAV_1 Air Loop Branches, !- Branch List Name , !- Connector List Name VAV_1 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name VAV_1 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name VAV_1 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names VAV_1 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names AirLoopHVAC, VAV_ER, !- Name VAV_ER_Controllers, !- Controller List Name VAV_ER Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} VAV_ER Air Loop Branches,!- Branch List Name , !- Connector List Name VAV_ER Supply Equipment Inlet Node, !- Supply Side Inlet Node Name VAV_ER Zone Equipment Outlet Node, !- Demand Side Outlet Node Name VAV_ER Zone Equipment Inlet Node, !- Demand Side Inlet Node Names VAV_ER Supply Equipment Outlet Node; !- Supply Side Outlet Node Names AirLoopHVAC, VAV_OR, !- Name VAV_OR_Controllers, !- Controller List Name VAV_OR Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} VAV_OR Air Loop Branches,!- Branch List Name , !- Connector List Name VAV_OR Supply Equipment Inlet Node, !- Supply Side Inlet Node Name VAV_OR Zone Equipment Outlet Node, !- Demand Side Outlet Node Name VAV_OR Zone Equipment Inlet Node, !- Demand Side Inlet Node Names VAV_OR Supply Equipment Outlet Node; !- Supply Side Outlet Node Names AirLoopHVAC, VAV_ICU, !- Name VAV_ICU_Controllers, !- Controller List Name VAV_ICU Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} VAV_ICU Air Loop Branches, !- Branch List Name , !- Connector List Name VAV_ICU Supply Equipment Inlet Node, !- Supply Side Inlet Node Name VAV_ICU Zone Equipment Outlet Node, !- Demand Side Outlet Node Name VAV_ICU Zone Equipment Inlet Node, !- Demand Side Inlet Node Names VAV_ICU Supply Equipment Outlet Node; !- Supply Side Outlet Node Names AirLoopHVAC, VAV_PATRMS, !- Name VAV_PATRMS_Controllers, !- Controller List Name VAV_PATRMS Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} VAV_PATRMS Air Loop Branches, !- Branch List Name , !- Connector List Name VAV_PATRMS Supply Equipment Inlet Node, !- Supply Side Inlet Node Name VAV_PATRMS Zone Equipment Outlet Node, !- Demand Side Outlet Node Name VAV_PATRMS Zone Equipment Inlet Node, !- Demand Side Inlet Node Names VAV_PATRMS Supply Equipment Outlet Node; !- Supply Side Outlet Node Names AirLoopHVAC, VAV_2, !- Name VAV_2_Controllers, !- Controller List Name VAV_2 Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} VAV_2 Air Loop Branches, !- Branch List Name , !- Connector List Name VAV_2 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name VAV_2 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name VAV_2 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names VAV_2 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names AirLoopHVAC, VAV_LABS, !- Name VAV_LABS_Controllers, !- Controller List Name VAV_LABS Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} VAV_LABS Air Loop Branches, !- Branch List Name , !- Connector List Name VAV_LABS Supply Equipment Inlet Node, !- Supply Side Inlet Node Name VAV_LABS Zone Equipment Outlet Node, !- Demand Side Outlet Node Name VAV_LABS Zone Equipment Inlet Node, !- Demand Side Inlet Node Names VAV_LABS Supply Equipment Outlet Node; !- Supply Side Outlet Node Names AirLoopHVAC, CAV_KITCHEN, !- Name CAV_KITCHEN_Controllers, !- Controller List Name CAV_KITCHEN Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} CAV_KITCHEN Air Loop Branches, !- Branch List Name , !- Connector List Name CAV_KITCHEN Supply Equipment Inlet Node, !- Supply Side Inlet Node Name CAV_KITCHEN Zone Equipment Outlet Node, !- Demand Side Outlet Node Name CAV_KITCHEN Zone Equipment Inlet Node, !- Demand Side Inlet Node Names CAV_KITCHEN Supply Equipment Outlet Node; !- Supply Side Outlet Node Names !- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:CONTROLLERLIST =========== AirLoopHVAC:ControllerList, VAV_1_Controllers, !- Name Controller:WaterCoil, !- Controller 1 Object Type VAV_1_CoolC_Controller, !- Controller 1 Name Controller:WaterCoil, !- Controller 2 Object Type VAV_1_HeatC_Controller; !- Controller 2 Name AirLoopHVAC:ControllerList, VAV_1_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type VAV_1_OA_Controller; !- Controller 1 Name AirLoopHVAC:ControllerList, VAV_ER_Controllers, !- Name Controller:WaterCoil, !- Controller 1 Object Type VAV_ER_ExtraWaterHeatC_Controller, !- Controller 1 Name Controller:WaterCoil, !- Controller 2 Object Type VAV_ER_CoolC_Controller, !- Controller 2 Name Controller:WaterCoil, !- Controller 3 Object Type VAV_ER_HeatC_Controller; !- Controller 3 Name AirLoopHVAC:ControllerList, VAV_ER_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type VAV_ER_OA_Controller; !- Controller 1 Name AirLoopHVAC:ControllerList, VAV_OR_Controllers, !- Name Controller:WaterCoil, !- Controller 1 Object Type VAV_OR_ExtraWaterHeatC_Controller, !- Controller 1 Name Controller:WaterCoil, !- Controller 2 Object Type VAV_OR_CoolC_Controller, !- Controller 2 Name Controller:WaterCoil, !- Controller 3 Object Type VAV_OR_HeatC_Controller; !- Controller 3 Name AirLoopHVAC:ControllerList, VAV_OR_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type VAV_OR_OA_Controller; !- Controller 1 Name AirLoopHVAC:ControllerList, VAV_ICU_Controllers, !- Name Controller:WaterCoil, !- Controller 1 Object Type VAV_ICU_ExtraWaterHeatC_Controller, !- Controller 1 Name Controller:WaterCoil, !- Controller 2 Object Type VAV_ICU_CoolC_Controller,!- Controller 2 Name Controller:WaterCoil, !- Controller 3 Object Type VAV_ICU_HeatC_Controller;!- Controller 3 Name AirLoopHVAC:ControllerList, VAV_ICU_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type VAV_ICU_OA_Controller; !- Controller 1 Name AirLoopHVAC:ControllerList, VAV_PATRMS_Controllers, !- Name Controller:WaterCoil, !- Controller 1 Object Type VAV_PATRMS_ExtraWaterHeatC_Controller, !- Controller 1 Name Controller:WaterCoil, !- Controller 2 Object Type VAV_PATRMS_CoolC_Controller, !- Controller 2 Name Controller:WaterCoil, !- Controller 3 Object Type VAV_PATRMS_HeatC_Controller; !- Controller 3 Name AirLoopHVAC:ControllerList, VAV_PATRMS_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type VAV_PATRMS_OA_Controller;!- Controller 1 Name AirLoopHVAC:ControllerList, VAV_2_Controllers, !- Name Controller:WaterCoil, !- Controller 1 Object Type VAV_2_CoolC_Controller, !- Controller 1 Name Controller:WaterCoil, !- Controller 2 Object Type VAV_2_HeatC_Controller; !- Controller 2 Name AirLoopHVAC:ControllerList, VAV_2_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type VAV_2_OA_Controller; !- Controller 1 Name AirLoopHVAC:ControllerList, VAV_LABS_Controllers, !- Name Controller:WaterCoil, !- Controller 1 Object Type VAV_LABS_ExtraWaterHeatC_Controller, !- Controller 1 Name Controller:WaterCoil, !- Controller 2 Object Type VAV_LABS_CoolC_Controller, !- Controller 2 Name Controller:WaterCoil, !- Controller 3 Object Type VAV_LABS_HeatC_Controller; !- Controller 3 Name AirLoopHVAC:ControllerList, VAV_LABS_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type VAV_LABS_OA_Controller; !- Controller 1 Name AirLoopHVAC:ControllerList, CAV_KITCHEN_Controllers, !- Name Controller:WaterCoil, !- Controller 1 Object Type CAV_KITCHEN_CoolC_Controller, !- Controller 1 Name Controller:WaterCoil, !- Controller 2 Object Type CAV_KITCHEN_HeatC_Controller; !- Controller 2 Name AirLoopHVAC:ControllerList, CAV_KITCHEN_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type CAV_KITCHEN_OA_Controller; !- Controller 1 Name !- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:OUTDOORAIRSYSTEM:EQUIPMENTLIST =========== AirLoopHVAC:OutdoorAirSystem:EquipmentList, VAV_1_OA_Equipment, !- Name HeatExchanger:AirToAir:SensibleAndLatent, !- Component 1 Object Type VAV_1 OA Heat Recovery, !- Component 1 Name OutdoorAir:Mixer, !- Component 2 Object Type VAV_1_OAMixing Box; !- Component 2 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, VAV_ER_OA_Equipment, !- Name OutdoorAir:Mixer, !- Component 1 Object Type VAV_ER_OAMixing Box; !- Component 1 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, VAV_OR_OA_Equipment, !- Name OutdoorAir:Mixer, !- Component 1 Object Type VAV_OR_OAMixing Box; !- Component 1 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, VAV_ICU_OA_Equipment, !- Name HeatExchanger:AirToAir:SensibleAndLatent, !- Component 1 Object Type ICU OA Heat Recovery, !- Component 1 Name OutdoorAir:Mixer, !- Component 2 Object Type VAV_ICU_OAMixing Box; !- Component 2 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, VAV_PATRMS_OA_Equipment, !- Name HeatExchanger:AirToAir:SensibleAndLatent, !- Component 1 Object Type PATRMS OA Heat Recovery, !- Component 1 Name OutdoorAir:Mixer, !- Component 2 Object Type VAV_PATRMS_OAMixing Box; !- Component 2 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, VAV_2_OA_Equipment, !- Name OutdoorAir:Mixer, !- Component 1 Object Type VAV_2_OAMixing Box; !- Component 1 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, VAV_LABS_OA_Equipment, !- Name OutdoorAir:Mixer, !- Component 1 Object Type VAV_LABS_OAMixing Box; !- Component 1 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, CAV_KITCHEN_OA_Equipment,!- Name OutdoorAir:Mixer, !- Component 1 Object Type CAV_KITCHEN_OAMixing Box;!- Component 1 Name !- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:OUTDOORAIRSYSTEM =========== AirLoopHVAC:OutdoorAirSystem, VAV_1_OA, !- Name VAV_1_OA_Controllers, !- Controller List Name VAV_1_OA_Equipment, !- Outdoor Air Equipment List Name VAV_1 Availability Manager List; !- Availability Manager List Name AirLoopHVAC:OutdoorAirSystem, VAV_ER_OA, !- Name VAV_ER_OA_Controllers, !- Controller List Name VAV_ER_OA_Equipment, !- Outdoor Air Equipment List Name VAV_ER Availability Manager List; !- Availability Manager List Name AirLoopHVAC:OutdoorAirSystem, VAV_OR_OA, !- Name VAV_OR_OA_Controllers, !- Controller List Name VAV_OR_OA_Equipment, !- Outdoor Air Equipment List Name VAV_OR Availability Manager List; !- Availability Manager List Name AirLoopHVAC:OutdoorAirSystem, VAV_ICU_OA, !- Name VAV_ICU_OA_Controllers, !- Controller List Name VAV_ICU_OA_Equipment, !- Outdoor Air Equipment List Name VAV_ICU Availability Manager List; !- Availability Manager List Name AirLoopHVAC:OutdoorAirSystem, VAV_PATRMS_OA, !- Name VAV_PATRMS_OA_Controllers, !- Controller List Name VAV_PATRMS_OA_Equipment, !- Outdoor Air Equipment List Name VAV_PATRMS Availability Manager List; !- Availability Manager List Name AirLoopHVAC:OutdoorAirSystem, VAV_2_OA, !- Name VAV_2_OA_Controllers, !- Controller List Name VAV_2_OA_Equipment, !- Outdoor Air Equipment List Name VAV_2 Availability Manager List; !- Availability Manager List Name AirLoopHVAC:OutdoorAirSystem, VAV_LABS_OA, !- Name VAV_LABS_OA_Controllers, !- Controller List Name VAV_LABS_OA_Equipment, !- Outdoor Air Equipment List Name VAV_LABS Availability Manager List; !- Availability Manager List Name AirLoopHVAC:OutdoorAirSystem, CAV_KITCHEN_OA, !- Name CAV_KITCHEN_OA_Controllers, !- Controller List Name CAV_KITCHEN_OA_Equipment,!- Outdoor Air Equipment List Name CAV_KITCHEN Availability Manager List; !- Availability Manager List Name !- =========== ALL OBJECTS IN CLASS: OUTSIDE AIR NODE =========== OutdoorAir:Node, RACK1_condenserInlet; !- Name OutdoorAir:Node, RACK2_condenserInlet; !- Name OutdoorAir:Node, TowerWaterSys CoolTower OA ref Node; !- Name OutdoorAir:Node, Dummy Water Heater OA Node; !- Name !- =========== ALL OBJECTS IN CLASS: OUTSIDE AIR INLET NODE LIST =========== OutdoorAir:NodeList, VAV_1_OANode List; !- Node or NodeList Name 1 OutdoorAir:NodeList, VAV_ER_OANode List; !- Node or NodeList Name 1 OutdoorAir:NodeList, VAV_OR_OANode List; !- Node or NodeList Name 1 OutdoorAir:NodeList, VAV_ICU_OANode List; !- Node or NodeList Name 1 OutdoorAir:NodeList, VAV_PATRMS_OANode List; !- Node or NodeList Name 1 OutdoorAir:NodeList, VAV_2_OANode List; !- Node or NodeList Name 1 OutdoorAir:NodeList, VAV_LABS_OANode List; !- Node or NodeList Name 1 OutdoorAir:NodeList, CAV_KITCHEN_OANode List; !- Node or NodeList Name 1 !- =========== ALL OBJECTS IN CLASS: OUTDOORAIR:MIXER =========== OutdoorAir:Mixer, VAV_1_OAMixing Box, !- Name VAV_1_OA-VAV_1_CoolCNode, !- Mixed Air Node Name VAV_1 Heat Recovery Outlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name VAV_1_OARelief Node, !- Relief Air Stream Node Name VAV_1 Supply Equipment Inlet Node; !- Return Air Stream Node Name OutdoorAir:Mixer, VAV_ER_OAMixing Box, !- Name VAV_ER_OA-VAV_ER HumidifierNode, !- Mixed Air Node Name VAV_ER_OAInlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name VAV_ER_OARelief Node, !- Relief Air Stream Node Name VAV_ER Supply Equipment Inlet Node; !- Return Air Stream Node Name OutdoorAir:Mixer, VAV_OR_OAMixing Box, !- Name VAV_OR_OA-VAV_OR HumidifierNode, !- Mixed Air Node Name VAV_OR_OAInlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name VAV_OR_OARelief Node, !- Relief Air Stream Node Name VAV_OR Supply Equipment Inlet Node; !- Return Air Stream Node Name OutdoorAir:Mixer, VAV_ICU_OAMixing Box, !- Name VAV_ICU_OA-VAV_ICU HumidifierNode, !- Mixed Air Node Name ICU Heat Recovery Outlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name VAV_ICU_OARelief Node, !- Relief Air Stream Node Name VAV_ICU Supply Equipment Inlet Node; !- Return Air Stream Node Name OutdoorAir:Mixer, VAV_PATRMS_OAMixing Box, !- Name VAV_PATRMS_OA-VAV_PATRMS HumidifierNode, !- Mixed Air Node Name PATRMS Heat Recovery Outlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name VAV_PATRMS_OARelief Node,!- Relief Air Stream Node Name VAV_PATRMS Supply Equipment Inlet Node; !- Return Air Stream Node Name OutdoorAir:Mixer, VAV_2_OAMixing Box, !- Name VAV_2_OA-VAV_2_CoolCNode, !- Mixed Air Node Name VAV_2_OAInlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name VAV_2_OARelief Node, !- Relief Air Stream Node Name VAV_2 Supply Equipment Inlet Node; !- Return Air Stream Node Name OutdoorAir:Mixer, VAV_LABS_OAMixing Box, !- Name VAV_LABS_OA-VAV_LABS HumidifierNode, !- Mixed Air Node Name VAV_LABS_OAInlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name VAV_LABS_OARelief Node, !- Relief Air Stream Node Name VAV_LABS Supply Equipment Inlet Node; !- Return Air Stream Node Name OutdoorAir:Mixer, CAV_KITCHEN_OAMixing Box,!- Name CAV_KITCHEN_OA-CAV_KITCHEN_CoolCNode, !- Mixed Air Node Name CAV_KITCHEN_OAInlet Node,!- Outdoor Air Stream Node Name CAV_KITCHEN_OARelief Node, !- Relief Air Stream Node Name CAV_KITCHEN Supply Equipment Inlet Node; !- Return Air Stream Node Name !- =========== ALL OBJECTS IN CLASS: SYSTEM AVAILABILITY MANAGER LIST =========== AvailabilityManager:NightCycle, VAV_1 Availability Manager, !- Name Always_On, !- Applicability Schedule Name HVACOperationSchd, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} AvailabilityManager:NightCycle, VAV_ER Availability Manager, !- Name Always_On, !- Applicability Schedule Name HVACOperationSchd, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} AvailabilityManager:NightCycle, VAV_OR Availability Manager, !- Name Always_On, !- Applicability Schedule Name HVACOperationSchd, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} AvailabilityManager:NightCycle, VAV_ICU Availability Manager, !- Name Always_On, !- Applicability Schedule Name HVACOperationSchd, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} AvailabilityManager:NightCycle, VAV_PATRMS Availability Manager, !- Name Always_On, !- Applicability Schedule Name HVACOperationSchd, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} AvailabilityManager:NightCycle, VAV_2 Availability Manager, !- Name Always_On, !- Applicability Schedule Name HVACOperationSchd, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} AvailabilityManager:NightCycle, VAV_LABS Availability Manager, !- Name Always_On, !- Applicability Schedule Name HVACOperationSchd, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} AvailabilityManager:NightCycle, CAV_KITCHEN Availability Manager, !- Name Always_On, !- Applicability Schedule Name HVACOperationSchd, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} !- =========== ALL OBJECTS IN CLASS: SYSTEM AVAILABILITY MANAGER:NIGHT CYCLE =========== AvailabilityManagerAssignmentList, VAV_1 Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type VAV_1 Availability Manager; !- Availability Manager 1 Name AvailabilityManagerAssignmentList, VAV_ER Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type VAV_ER Availability Manager; !- Availability Manager 1 Name AvailabilityManagerAssignmentList, VAV_OR Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type VAV_OR Availability Manager; !- Availability Manager 1 Name AvailabilityManagerAssignmentList, VAV_ICU Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type VAV_ICU Availability Manager; !- Availability Manager 1 Name AvailabilityManagerAssignmentList, VAV_PATRMS Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type VAV_PATRMS Availability Manager; !- Availability Manager 1 Name AvailabilityManagerAssignmentList, VAV_2 Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type VAV_2 Availability Manager; !- Availability Manager 1 Name AvailabilityManagerAssignmentList, VAV_LABS Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type VAV_LABS Availability Manager; !- Availability Manager 1 Name AvailabilityManagerAssignmentList, CAV_KITCHEN Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type CAV_KITCHEN Availability Manager; !- Availability Manager 1 Name !- =========== ALL OBJECTS IN CLASS: SET POINT MANAGER:SCHEDULED =========== SetpointManager:Scheduled, CoolSys1 Loop Plant Demand Inlet Setpoint Manager, !- Name Temperature, !- Control Variable CW-Loop-Temp-Schedule, !- Schedule Name CoolSys1 Demand Inlet Node; !- Setpoint Node or NodeList Name SetpointManager:Scheduled, SHWSys1 Loop Setpoint Manager, !- Name Temperature, !- Control Variable SHWSys1-Loop-Temp-Schedule, !- Schedule Name SHWSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:OutdoorAirReset, HeatSys1 Loop Setpoint Manager, !- Name Temperature, !- Control Variable 60.0, !- Setpoint at Outdoor Low Temperature {C} -6.7, !- Outdoor Low Temperature {C} 48.89, !- Setpoint at Outdoor High Temperature {C} 10, !- Outdoor High Temperature {C} HeatSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:Scheduled, Heat Recovery Chiller Bypass Loop Setpoint Manager, !- Name Temperature, !- Control Variable Heat Recovery Chiller Bypass Loop Setpoint Schedule, !- Schedule Name Heat Recovery Chiller Outlet; !- Setpoint Node or NodeList Name Schedule:Constant, Heat Recovery Chiller Bypass Loop Setpoint Schedule, Temperature, 6.67; SetpointManager:OutdoorAirReset, CoolSys1 Loop Setpoint Manager, !- Name Temperature, !- Control Variable 8.89, !- Setpoint at Outdoor Low Temperature {C} 12.78, !- Outdoor Low Temperature {C} 6.7, !- Setpoint at Outdoor High Temperature {C} 21.11, !- Outdoor High Temperature {C} CoolSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:Scheduled, TowerWaterSystem Loop Setpoint Manager, !- Name Temperature, !- Control Variable Tower-Loop-Temp-Schedule,!- Schedule Name TowerWaterSys Supply Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:Scheduled, VAV_ER SAT setpoint, !- Name Temperature, !- Control Variable VAV_SAT_SCH, !- Schedule Name VAV_ER Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:Scheduled, VAV_OR SAT setpoint, !- Name Temperature, !- Control Variable VAV_SAT_SCH, !- Schedule Name VAV_OR Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:Scheduled, VAV_ICU SAT setpoint, !- Name Temperature, !- Control Variable VAV_SAT_SCH, !- Schedule Name VAV_ICU Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:Scheduled, VAV_PATRMS SAT setpoint, !- Name Temperature, !- Control Variable VAV_SAT_SCH, !- Schedule Name VAV_PATRMS Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:Scheduled, VAV_LABS SAT setpoint, !- Name Temperature, !- Control Variable VAV_SAT_SCH, !- Schedule Name VAV_LABS Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name !- =========== ALL OBJECTS IN CLASS: SET POINT MANAGER:SINGLEZONE:HEATING AND COOLING =========== SetpointManager:SingleZone:Heating, CAV_KITCHEN SAT setpoint - Htg, !- Name Temperature, !- Control Variable 12.8, !- Minimum Supply Air Temperature {C} 40.0, !- Maximum Supply Air Temperature {C} Kitchen_Flr_5, !- Control Zone Name Kitchen_Flr_5 Air Node, !- Zone Node Name Kitchen_Flr_5 Inlet Node, !- Zone Inlet Node Name Kitchen_Flr_5 Inlet Nodes; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, CAV_KITCHEN SAT setpoint - Coil Htg, !- Name Temperature, !- Control Variable Kitchen_Flr_5 Inlet Nodes, !- Reference Setpoint Node Name CAV_KITCHEN_HeatC-CAV_KITCHEN_FanNode, !- Fan Inlet Node Name CAV_KITCHEN Supply Equipment Outlet Node, !- Fan Outlet Node Name CAV_KITCHEN_HeatC-CAV_KITCHEN_FanNode; !- Setpoint Node or NodeList Name SetpointManager:SingleZone:Cooling, CAV_KITCHEN SAT setpoint - Clg, !- Name Temperature, !- Control Variable 12.8, !- Minimum Supply Air Temperature {C} 40.0, !- Maximum Supply Air Temperature {C} Kitchen_Flr_5, !- Control Zone Name Kitchen_Flr_5 Air Node, !- Zone Node Name Kitchen_Flr_5 Inlet Node, !- Zone Inlet Node Name CAV_KITCHEN Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, CAV_KITCHEN SAT setpoint - Coil Clg, !- Name Temperature, !- Control Variable CAV_KITCHEN Supply Equipment Outlet Node, !- Reference Setpoint Node Name CAV_KITCHEN_HeatC-CAV_KITCHEN_FanNode, !- Fan Inlet Node Name CAV_KITCHEN Supply Equipment Outlet Node, !- Fan Outlet Node Name CAV_KITCHEN_CoolC-CAV_KITCHEN_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:Scheduled, Heat Recovery Chiller Setpoint, !- Name Temperature, !- Control Variable Heat Recovery Chiller Setpoint, !- Schedule Name Heat Recovery Chiller HR Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:Scheduled, Dummy Water Heater Setpoint, !- Name Temperature, !- Control Variable Dummy Water Heater Setpoint, !- Schedule Name Heat Recovery Supply Outlet Node; !- Setpoint Node or NodeList Name !- =========== ALL OBJECTS IN CLASS: SET POINT MANAGER:OUTDOORAIRRESET =========== SetpointManager:OutdoorAirReset, VAV_1 Supply Air Temperature Manager, !- Name Temperature, !- Control Variable 15.6, !- Setpoint at Outdoor Low Temperature {C} 10, !- Outdoor Low Temperature {C} 12.8, !- Setpoint at Outdoor High Temperature {C} 21.1, !- Outdoor High Temperature {C} VAV_1 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:OutdoorAirReset, VAV_2 Supply Air Temperature Manager, !- Name Temperature, !- Control Variable 15.6, !- Setpoint at Outdoor Low Temperature {C} 10, !- Outdoor Low Temperature {C} 12.8, !- Setpoint at Outdoor High Temperature {C} 21.1, !- Outdoor High Temperature {C} VAV_2 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_PATRMS_ExtraElecHeatC Air Temp Manager, !- Name Temperature, !- Control Variable VAV_PATRMS Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_PATRMS_HeatC-VAV_PATRMS_FanNode, !- Fan Inlet Node Name VAV_PATRMS Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_PATRMS ExtraElecHeatC-VAV_PATRMS_ExtraWaterHeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_PATRMS_ExtraWaterHeatC Air Temp Manager, !- Name Temperature, !- Control Variable VAV_PATRMS Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_PATRMS_HeatC-VAV_PATRMS_FanNode, !- Fan Inlet Node Name VAV_PATRMS Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_PATRMS ExtraWaterHeatC-VAV_PATRMS_CoolCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_ER_ExtraElecHeatC Air Temp Manager, !- Name Temperature, !- Control Variable VAV_ER Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_ER_HeatC-VAV_ER_FanNode, !- Fan Inlet Node Name VAV_ER Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_ER ExtraElecHeatC-VAV_ER_ExtraWaterHeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_ER_ExtraWaterHeatC Air Temp Manager, !- Name Temperature, !- Control Variable VAV_ER Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_ER_HeatC-VAV_ER_FanNode, !- Fan Inlet Node Name VAV_ER Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_ER ExtraWaterHeatC-VAV_ER_CoolCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_OR_ExtraElecHeatC Air Temp Manager, !- Name Temperature, !- Control Variable VAV_OR Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_OR_HeatC-VAV_OR_FanNode, !- Fan Inlet Node Name VAV_OR Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_OR ExtraElecHeatC-VAV_OR_ExtraWaterHeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_OR_ExtraWaterHeatC Air Temp Manager, !- Name Temperature, !- Control Variable VAV_OR Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_OR_HeatC-VAV_OR_FanNode, !- Fan Inlet Node Name VAV_OR Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_OR ExtraWaterHeatC-VAV_OR_CoolCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_ICU_ExtraElecHeatC Air Temp Manager, !- Name Temperature, !- Control Variable VAV_ICU Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_ICU_HeatC-VAV_ICU_FanNode, !- Fan Inlet Node Name VAV_ICU Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_ICU ExtraElecHeatC-VAV_ICU_ExtraWaterHeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_ICU_ExtraWaterHeatC Air Temp Manager, !- Name Temperature, !- Control Variable VAV_ICU Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_ICU_HeatC-VAV_ICU_FanNode, !- Fan Inlet Node Name VAV_ICU Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_ICU ExtraWaterHeatC-VAV_ICU_CoolCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_LABS_ExtraElecHeatC Air Temp Manager, !- Name Temperature, !- Control Variable VAV_LABS Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_LABS_HeatC-VAV_LABS_FanNode, !- Fan Inlet Node Name VAV_LABS Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_LABS ExtraElecHeatC-VAV_LABS_ExtraWaterHeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_LABS_ExtraWaterHeatC Air Temp Manager, !- Name Temperature, !- Control Variable VAV_LABS Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_LABS_HeatC-VAV_LABS_FanNode, !- Fan Inlet Node Name VAV_LABS Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_LABS ExtraWaterHeatC-VAV_LABS_CoolCNode; !- Setpoint Node or NodeList Name !- =========== ALL OBJECTS IN CLASS: SETPOINTMANAGER:SINGLEZONE:HUMIDITY:MINIMUM =========== SetpointManager:MultiZone:Humidity:Minimum, VAV_ER Humidifier HUMRAT setpoint, !- Name VAV_ER, !- HVAC Air Loop Name , !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir} , !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir} VAV_ER Humidifier-VAV_ER_ExtraElecHeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MultiZone:Humidity:Minimum, VAV_OR Humidifier HUMRAT setpoint, !- Name VAV_OR, !- HVAC Air Loop Name , !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir} , !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir} VAV_OR Humidifier-VAV_OR_ExtraElecHeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MultiZone:Humidity:Minimum, VAV_ICU Humidifier HUMRAT setpoint, !- Name VAV_ICU, !- HVAC Air Loop Name , !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir} , !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir} VAV_ICU Humidifier-VAV_ICU_ExtraElecHeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MultiZone:Humidity:Minimum, VAV_PATRMS Humidifier HUMRAT setpoint, !- Name VAV_PATRMS, !- HVAC Air Loop Name , !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir} , !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir} VAV_PATRMS Humidifier-VAV_PATRMS_ExtraElecHeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MultiZone:Humidity:Minimum, VAV_LABS Humidifier HUMRAT setpoint, !- Name VAV_LABS, !- HVAC Air Loop Name , !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir} , !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir} VAV_LABS Humidifier-VAV_LABS_ExtraElecHeatCNode; !- Setpoint Node or NodeList Name !- =========== ALL OBJECTS IN CLASS: SETPOINTMANAGER:SINGLEZONE:HUMIDITY:MAXIMUM =========== SetpointManager:MultiZone:Humidity:Maximum, VAV_ER_CoolC HUMRAT setpoint, !- Name VAV_ER, !- HVAC Air Loop Name , !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir} , !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir} VAV_ER_CoolC-VAV_ER_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MultiZone:Humidity:Maximum, VAV_OR_CoolC HUMRAT setpoint, !- Name VAV_OR, !- HVAC Air Loop Name , !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir} , !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir} VAV_OR_CoolC-VAV_OR_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MultiZone:Humidity:Maximum, VAV_ICU_CoolC HUMRAT setpoint, !- Name VAV_ICU, !- HVAC Air Loop Name , !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir} , !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir} VAV_ICU_CoolC-VAV_ICU_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MultiZone:Humidity:Maximum, VAV_PATRMS_CoolC HUMRAT setpoint, !- Name VAV_PATRMS, !- HVAC Air Loop Name , !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir} , !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir} VAV_PATRMS_CoolC-VAV_PATRMS_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MultiZone:Humidity:Maximum, VAV_LABS_CoolC HUMRAT setpoint, !- Name VAV_LABS, !- HVAC Air Loop Name , !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir} , !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir} VAV_LABS_CoolC-VAV_LABS_HeatCNode; !- Setpoint Node or NodeList Name !- =========== ALL OBJECTS IN CLASS: SETPOINTMANAGER:MIXEDAIR =========== SetpointManager:MixedAir, VAV_1_CoolC SAT Manager, !- Name Temperature, !- Control Variable VAV_1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_1_HeatC-VAV_1_FanNode, !- Fan Inlet Node Name VAV_1 Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_1_CoolC-VAV_1_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_1_HeatC SAT Manager, !- Name Temperature, !- Control Variable VAV_1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_1_HeatC-VAV_1_FanNode, !- Fan Inlet Node Name VAV_1 Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_1_HeatC-VAV_1_FanNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_1_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable VAV_1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_1_HeatC-VAV_1_FanNode, !- Fan Inlet Node Name VAV_1 Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_1_OA-VAV_1_CoolCNode;!- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_ER_CoolC SAT Manager,!- Name Temperature, !- Control Variable VAV_ER Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_ER_HeatC-VAV_ER_FanNode, !- Fan Inlet Node Name VAV_ER Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_ER_CoolC-VAV_ER_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_ER_HeatC SAT Manager,!- Name Temperature, !- Control Variable VAV_ER Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_ER_HeatC-VAV_ER_FanNode, !- Fan Inlet Node Name VAV_ER Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_ER_HeatC-VAV_ER_FanNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_ER_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable VAV_ER Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_ER_HeatC-VAV_ER_FanNode, !- Fan Inlet Node Name VAV_ER Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_ER_OA-VAV_ER HumidifierNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_OR_CoolC SAT Manager,!- Name Temperature, !- Control Variable VAV_OR Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_OR_HeatC-VAV_OR_FanNode, !- Fan Inlet Node Name VAV_OR Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_OR_CoolC-VAV_OR_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_OR_HeatC SAT Manager,!- Name Temperature, !- Control Variable VAV_OR Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_OR_HeatC-VAV_OR_FanNode, !- Fan Inlet Node Name VAV_OR Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_OR_HeatC-VAV_OR_FanNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_OR_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable VAV_OR Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_OR_HeatC-VAV_OR_FanNode, !- Fan Inlet Node Name VAV_OR Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_OR_OA-VAV_OR HumidifierNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_ICU_CoolC SAT Manager, !- Name Temperature, !- Control Variable VAV_ICU Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_ICU_HeatC-VAV_ICU_FanNode, !- Fan Inlet Node Name VAV_ICU Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_ICU_CoolC-VAV_ICU_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_ICU_HeatC SAT Manager, !- Name Temperature, !- Control Variable VAV_ICU Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_ICU_HeatC-VAV_ICU_FanNode, !- Fan Inlet Node Name VAV_ICU Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_ICU_HeatC-VAV_ICU_FanNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_ICU_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable VAV_ICU Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_ICU_HeatC-VAV_ICU_FanNode, !- Fan Inlet Node Name VAV_ICU Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_ICU_OA-VAV_ICU HumidifierNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_PATRMS_CoolC SAT Manager, !- Name Temperature, !- Control Variable VAV_PATRMS Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_PATRMS_HeatC-VAV_PATRMS_FanNode, !- Fan Inlet Node Name VAV_PATRMS Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_PATRMS_CoolC-VAV_PATRMS_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_PATRMS_HeatC SAT Manager, !- Name Temperature, !- Control Variable VAV_PATRMS Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_PATRMS_HeatC-VAV_PATRMS_FanNode, !- Fan Inlet Node Name VAV_PATRMS Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_PATRMS_HeatC-VAV_PATRMS_FanNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_PATRMS_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable VAV_PATRMS Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_PATRMS_HeatC-VAV_PATRMS_FanNode, !- Fan Inlet Node Name VAV_PATRMS Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_PATRMS_OA-VAV_PATRMS HumidifierNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_2_CoolC SAT Manager, !- Name Temperature, !- Control Variable VAV_2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_2_HeatC-VAV_2_FanNode, !- Fan Inlet Node Name VAV_2 Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_2_CoolC-VAV_2_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_2_HeatC SAT Manager, !- Name Temperature, !- Control Variable VAV_2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_2_HeatC-VAV_2_FanNode, !- Fan Inlet Node Name VAV_2 Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_2_HeatC-VAV_2_FanNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_2_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable VAV_2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_2_HeatC-VAV_2_FanNode, !- Fan Inlet Node Name VAV_2 Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_2_OA-VAV_2_CoolCNode;!- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_LABS_CoolC SAT Manager, !- Name Temperature, !- Control Variable VAV_LABS Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_LABS_HeatC-VAV_LABS_FanNode, !- Fan Inlet Node Name VAV_LABS Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_LABS_CoolC-VAV_LABS_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_LABS_HeatC SAT Manager, !- Name Temperature, !- Control Variable VAV_LABS Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_LABS_HeatC-VAV_LABS_FanNode, !- Fan Inlet Node Name VAV_LABS Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_LABS_HeatC-VAV_LABS_FanNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_LABS_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable VAV_LABS Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_LABS_HeatC-VAV_LABS_FanNode, !- Fan Inlet Node Name VAV_LABS Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_LABS_OA-VAV_LABS HumidifierNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, CAV_KITCHEN_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable CAV_KITCHEN Supply Equipment Outlet Node, !- Reference Setpoint Node Name CAV_KITCHEN_HeatC-CAV_KITCHEN_FanNode, !- Fan Inlet Node Name CAV_KITCHEN Supply Equipment Outlet Node, !- Fan Outlet Node Name CAV_KITCHEN_OA-CAV_KITCHEN_CoolCNode; !- Setpoint Node or NodeList Name SetpointManager:OutdoorAirPretreat, ICU Heat Exhchanger Supply Air Temp Manager, !- Name Temperature, !- Control Variable -99, !- Minimum Setpoint Temperature {C} 99, !- Maximum Setpoint Temperature {C} 0.00001, !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir} 1.0, !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir} VAV_ICU_OA-VAV_ICU HumidifierNode, !- Reference Setpoint Node Name VAV_ICU_OA-VAV_ICU HumidifierNode, !- Mixed Air Stream Node Name VAV_ICU_OAInlet Node, !- Outdoor Air Stream Node Name VAV_ICU Supply Equipment Inlet Node, !- Return Air Stream Node Name ICU Heat Recovery Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:OutdoorAirPretreat, PATRMS Heat Exhchanger Supply Air Temp Manager, !- Name Temperature, !- Control Variable -99, !- Minimum Setpoint Temperature {C} 99, !- Maximum Setpoint Temperature {C} 0.00001, !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir} 1.0, !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir} VAV_PATRMS_OA-VAV_PATRMS HumidifierNode, !- Reference Setpoint Node Name VAV_PATRMS_OA-VAV_PATRMS HumidifierNode, !- Mixed Air Stream Node Name VAV_PATRMS_OAInlet Node, !- Outdoor Air Stream Node Name VAV_PATRMS Supply Equipment Inlet Node, !- Return Air Stream Node Name PATRMS Heat Recovery Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:OutdoorAirPretreat, VAV_1 Heat Exhchanger Supply Air Temp Manager, !- Name Temperature, !- Control Variable -99, !- Minimum Setpoint Temperature {C} 99, !- Maximum Setpoint Temperature {C} 0.00001, !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir} 1.0, !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir} VAV_1_OA-VAV_1_CoolCNode,!- Reference Setpoint Node Name VAV_1_OA-VAV_1_CoolCNode,!- Mixed Air Stream Node Name VAV_1_OAInlet Node, !- Outdoor Air Stream Node Name VAV_1 Supply Equipment Inlet Node, !- Return Air Stream Node Name VAV_1 Heat Recovery Outlet Node; !- Setpoint Node or NodeList Name !- =========== ALL OBJECTS IN CLASS: CONTROLLER:WATERCOIL =========== Controller:WaterCoil, VAV_PATRMS_ExtraWaterHeatC_Controller, !- Name Temperature, !- Control Variable Normal, !- Action Flow, !- Actuator Variable VAV_PATRMS ExtraWaterHeatC-VAV_PATRMS_CoolCNode, !- Sensor Node Name VAV_PATRMS_ExtraWaterHeatCDemand Inlet Node, !- Actuator Node Name 0.0001, !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_ER_ExtraWaterHeatC_Controller, !- Name Temperature, !- Control Variable Normal, !- Action Flow, !- Actuator Variable VAV_ER ExtraWaterHeatC-VAV_ER_CoolCNode, !- Sensor Node Name VAV_ER_ExtraWaterHeatCDemand Inlet Node, !- Actuator Node Name 0.0001, !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_OR_ExtraWaterHeatC_Controller, !- Name Temperature, !- Control Variable Normal, !- Action Flow, !- Actuator Variable VAV_OR ExtraWaterHeatC-VAV_OR_CoolCNode, !- Sensor Node Name VAV_OR_ExtraWaterHeatCDemand Inlet Node, !- Actuator Node Name 0.0001, !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_ICU_ExtraWaterHeatC_Controller, !- Name Temperature, !- Control Variable Normal, !- Action Flow, !- Actuator Variable VAV_ICU ExtraWaterHeatC-VAV_ICU_CoolCNode, !- Sensor Node Name VAV_ICU_ExtraWaterHeatCDemand Inlet Node, !- Actuator Node Name 0.0001, !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_LABS_ExtraWaterHeatC_Controller, !- Name Temperature, !- Control Variable Normal, !- Action Flow, !- Actuator Variable VAV_LABS ExtraWaterHeatC-VAV_LABS_CoolCNode, !- Sensor Node Name VAV_LABS_ExtraWaterHeatCDemand Inlet Node, !- Actuator Node Name 0.0001, !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_1_CoolC_Controller, !- Name Temperature, !- Control Variable Reverse, !- Action Flow, !- Actuator Variable VAV_1_CoolC-VAV_1_HeatCNode, !- Sensor Node Name VAV_1_CoolCDemand Inlet Node, !- Actuator Node Name , !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_1_HeatC_Controller, !- Name Temperature, !- Control Variable Normal, !- Action Flow, !- Actuator Variable VAV_1_HeatC-VAV_1_FanNode, !- Sensor Node Name VAV_1_HeatCDemand Inlet Node, !- Actuator Node Name 0.0001, !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_ER_CoolC_Controller, !- Name TemperatureAndHumidityRatio, !- Control Variable Reverse, !- Action Flow, !- Actuator Variable VAV_ER_CoolC-VAV_ER_HeatCNode, !- Sensor Node Name VAV_ER_CoolCDemand Inlet Node, !- Actuator Node Name , !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_ER_HeatC_Controller, !- Name Temperature, !- Control Variable Normal, !- Action Flow, !- Actuator Variable VAV_ER_HeatC-VAV_ER_FanNode, !- Sensor Node Name VAV_ER_HeatCDemand Inlet Node, !- Actuator Node Name 0.0001, !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_OR_CoolC_Controller, !- Name TemperatureAndHumidityRatio, !- Control Variable Reverse, !- Action Flow, !- Actuator Variable VAV_OR_CoolC-VAV_OR_HeatCNode, !- Sensor Node Name VAV_OR_CoolCDemand Inlet Node, !- Actuator Node Name , !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_OR_HeatC_Controller, !- Name Temperature, !- Control Variable Normal, !- Action Flow, !- Actuator Variable VAV_OR_HeatC-VAV_OR_FanNode, !- Sensor Node Name VAV_OR_HeatCDemand Inlet Node, !- Actuator Node Name 0.0001, !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_ICU_CoolC_Controller,!- Name TemperatureAndHumidityRatio, !- Control Variable Reverse, !- Action Flow, !- Actuator Variable VAV_ICU_CoolC-VAV_ICU_HeatCNode, !- Sensor Node Name VAV_ICU_CoolCDemand Inlet Node, !- Actuator Node Name , !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_ICU_HeatC_Controller,!- Name Temperature, !- Control Variable Normal, !- Action Flow, !- Actuator Variable VAV_ICU_HeatC-VAV_ICU_FanNode, !- Sensor Node Name VAV_ICU_HeatCDemand Inlet Node, !- Actuator Node Name 0.0001, !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_PATRMS_CoolC_Controller, !- Name TemperatureAndHumidityRatio, !- Control Variable Reverse, !- Action Flow, !- Actuator Variable VAV_PATRMS_CoolC-VAV_PATRMS_HeatCNode, !- Sensor Node Name VAV_PATRMS_CoolCDemand Inlet Node, !- Actuator Node Name , !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_PATRMS_HeatC_Controller, !- Name Temperature, !- Control Variable Normal, !- Action Flow, !- Actuator Variable VAV_PATRMS_HeatC-VAV_PATRMS_FanNode, !- Sensor Node Name VAV_PATRMS_HeatCDemand Inlet Node, !- Actuator Node Name 0.0001, !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_2_CoolC_Controller, !- Name Temperature, !- Control Variable Reverse, !- Action Flow, !- Actuator Variable VAV_2_CoolC-VAV_2_HeatCNode, !- Sensor Node Name VAV_2_CoolCDemand Inlet Node, !- Actuator Node Name , !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_2_HeatC_Controller, !- Name Temperature, !- Control Variable Normal, !- Action Flow, !- Actuator Variable VAV_2_HeatC-VAV_2_FanNode, !- Sensor Node Name VAV_2_HeatCDemand Inlet Node, !- Actuator Node Name 0.0001, !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_LABS_CoolC_Controller, !- Name TemperatureAndHumidityRatio, !- Control Variable Reverse, !- Action Flow, !- Actuator Variable VAV_LABS_CoolC-VAV_LABS_HeatCNode, !- Sensor Node Name VAV_LABS_CoolCDemand Inlet Node, !- Actuator Node Name , !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_LABS_HeatC_Controller, !- Name Temperature, !- Control Variable Normal, !- Action Flow, !- Actuator Variable VAV_LABS_HeatC-VAV_LABS_FanNode, !- Sensor Node Name VAV_LABS_HeatCDemand Inlet Node, !- Actuator Node Name 0.0001, !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, CAV_KITCHEN_CoolC_Controller, !- Name Temperature, !- Control Variable Reverse, !- Action Flow, !- Actuator Variable CAV_KITCHEN_CoolC-CAV_KITCHEN_HeatCNode, !- Sensor Node Name CAV_KITCHEN_CoolCDemand Inlet Node, !- Actuator Node Name , !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, CAV_KITCHEN_HeatC_Controller, !- Name Temperature, !- Control Variable Normal, !- Action Flow, !- Actuator Variable CAV_KITCHEN_HeatC-CAV_KITCHEN_FanNode, !- Sensor Node Name CAV_KITCHEN_HeatCDemand Inlet Node, !- Actuator Node Name 0.0001, !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} !- =========== ALL OBJECTS IN CLASS: CONTROLLER:OUTDOORAIR =========== Controller:OutdoorAir, VAV_1_OA_Controller, !- Name VAV_1_OARelief Node, !- Relief Air Outlet Node Name VAV_1 Supply Equipment Inlet Node, !- Return Air Node Name VAV_1_OA-VAV_1_CoolCNode, !- Mixed Air Node Name VAV_1_OAInlet Node, !- Actuator Node Name 0, !- Minimum Outdoor Air Flow Rate {m3/s} !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type , !- Economizer Maximum Limit Dry-Bulb Temperature {C} !- Economizer Maximum Limit Dry-Bulb Temperature {C} , !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name , !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type, !- Lockout Type FixedMinimum, !- Minimum Limit Type MinOA_Sched, !- Minimum Outdoor Air Schedule Name BLDG_OA_FRAC_SCH, !- Minimum Fraction of Outdoor Air Schedule Name VAV_1 Max OA Fraction, !- Maximum Fraction of Outdoor Air Schedule Name VAV_1_DCV, !- Mechanical Ventilation Controller Name , !- Time of Day Economizer Control Schedule Name , !- High Humidity Control , !- Humidistat Control Zone Name , !- High Humidity Outdoor Air Flow Ratio , !- Control High Indoor Humidity Based on Outdoor Humidity Ratio BypassWhenOAFlowGreaterThanMinimum; !- Heat Recovery Bypass Control Type !- Mechanical Ventilation Controller Name Controller:OutdoorAir, VAV_ER_OA_Controller, !- Name VAV_ER_OARelief Node, !- Relief Air Outlet Node Name VAV_ER Supply Equipment Inlet Node, !- Return Air Node Name VAV_ER_OA-VAV_ER HumidifierNode, !- Mixed Air Node Name VAV_ER_OAInlet Node, !- Actuator Node Name AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} NoEconomizer, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type , !- Economizer Maximum Limit Dry-Bulb Temperature {C} , !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name , !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type FixedMinimum, !- Minimum Limit Type MinOA_Sched, !- Minimum Outdoor Air Schedule Name VAV_ER_OAminOAFracSchedule; !- Minimum Fraction of Outdoor Air Schedule Name Controller:OutdoorAir, VAV_OR_OA_Controller, !- Name VAV_OR_OARelief Node, !- Relief Air Outlet Node Name VAV_OR Supply Equipment Inlet Node, !- Return Air Node Name VAV_OR_OA-VAV_OR HumidifierNode, !- Mixed Air Node Name VAV_OR_OAInlet Node, !- Actuator Node Name AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} NoEconomizer, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type , !- Economizer Maximum Limit Dry-Bulb Temperature {C} , !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name , !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type, !- Lockout Type FixedMinimum, !- Minimum Limit Type MinOA_Sched, !- Minimum Outdoor Air Schedule Name VAV_OR_OAminOAFracSchedule; !- Minimum Fraction of Outdoor Air Schedule Name Controller:OutdoorAir, VAV_ICU_OA_Controller, !- Name VAV_ICU_OARelief Node, !- Relief Air Outlet Node Name VAV_ICU Supply Equipment Inlet Node, !- Return Air Node Name VAV_ICU_OA-VAV_ICU HumidifierNode, !- Mixed Air Node Name VAV_ICU_OAInlet Node, !- Actuator Node Name AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} NoEconomizer, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type , !- Economizer Maximum Limit Dry-Bulb Temperature {C} , !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name , !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type, !- Lockout Type FixedMinimum, !- Minimum Limit Type MinOA_Sched, !- Minimum Outdoor Air Schedule Name VAV_ICU_OAminOAFracSchedule, !- Minimum Fraction of Outdoor Air Schedule Name , !- Maximum Fraction of Outdoor Air Schedule Name , !- Mechanical Ventilation Controller Name , !- Time of Day Economizer Control Schedule Name , !- High Humidity Control , !- Humidistat Control Zone Name , !- High Humidity Outdoor Air Flow Ratio , !- Control High Indoor Humidity Based on Outdoor Humidity Ratio BypassWhenOAFlowGreaterThanMinimum; !- Heat Recovery Bypass Control Type Controller:OutdoorAir, VAV_PATRMS_OA_Controller, !- Name VAV_PATRMS_OARelief Node, !- Relief Air Outlet Node Name VAV_PATRMS Supply Equipment Inlet Node, !- Return Air Node Name VAV_PATRMS_OA-VAV_PATRMS HumidifierNode, !- Mixed Air Node Name VAV_PATRMS_OAInlet Node, !- Actuator Node Name AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} NoEconomizer, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type , !- Economizer Maximum Limit Dry-Bulb Temperature {C} , !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name , !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type, !- Lockout Type FixedMinimum, !- Minimum Limit Type MinOA_Sched, !- Minimum Outdoor Air Schedule Name VAV_PATRMS_OAminOAFracSchedule, !- Minimum Fraction of Outdoor Air Schedule Name , !- Maximum Fraction of Outdoor Air Schedule Name , !- Mechanical Ventilation Controller Name , !- Time of Day Economizer Control Schedule Name , !- High Humidity Control , !- Humidistat Control Zone Name , !- High Humidity Outdoor Air Flow Ratio , !- Control High Indoor Humidity Based on Outdoor Humidity Ratio BypassWhenOAFlowGreaterThanMinimum; !- Heat Recovery Bypass Control Type Controller:OutdoorAir, VAV_2_OA_Controller, !- Name VAV_2_OARelief Node, !- Relief Air Outlet Node Name VAV_2 Supply Equipment Inlet Node, !- Return Air Node Name VAV_2_OA-VAV_2_CoolCNode, !- Mixed Air Node Name VAV_2_OAInlet Node, !- Actuator Node Name 0, !- Minimum Outdoor Air Flow Rate {m3/s} !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type , !- Economizer Maximum Limit Dry-Bulb Temperature {C} !- Economizer Maximum Limit Dry-Bulb Temperature {C} , !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name , !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type, !- Lockout Type FixedMinimum, !- Minimum Limit Type MinOA_Sched, !- Minimum Outdoor Air Schedule Name BLDG_OA_FRAC_SCH, !- Minimum Fraction of Outdoor Air Schedule Name VAV_2 Max OA Fraction, !- Maximum Fraction of Outdoor Air Schedule Name VAV_2_DCV; !- Mechanical Ventilation Controller Name Controller:OutdoorAir, VAV_LABS_OA_Controller, !- Name VAV_LABS_OARelief Node, !- Relief Air Outlet Node Name VAV_LABS Supply Equipment Inlet Node, !- Return Air Node Name VAV_LABS_OA-VAV_LABS HumidifierNode, !- Mixed Air Node Name VAV_LABS_OAInlet Node, !- Actuator Node Name AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} NoEconomizer, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type , !- Economizer Maximum Limit Dry-Bulb Temperature {C} , !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name , !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type, !- Lockout Type FixedMinimum, !- Minimum Limit Type MinOA_Sched, !- Minimum Outdoor Air Schedule Name VAV_LABS_OAminOAFracSchedule; !- Minimum Fraction of Outdoor Air Schedule Name Controller:OutdoorAir, CAV_KITCHEN_OA_Controller, !- Name CAV_KITCHEN_OARelief Node, !- Relief Air Outlet Node Name CAV_KITCHEN Supply Equipment Inlet Node, !- Return Air Node Name CAV_KITCHEN_OA-CAV_KITCHEN_CoolCNode, !- Mixed Air Node Name CAV_KITCHEN_OAInlet Node, !- Actuator Node Name AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type , !- Economizer Maximum Limit Dry-Bulb Temperature {C} !- Economizer Maximum Limit Dry-Bulb Temperature {C} , !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name , !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type, !- Lockout Type FixedMinimum, !- Minimum Limit Type Kitchen_Exhaust_SCH; !- Minimum Outdoor Air Schedule Name !- =========== ALL OBJECTS IN CLASS: CONTROLLED ZONE EQUIP CONFIGURATION =========== ZoneHVAC:EquipmentConnections, Basement, !- Zone Name Basement Equipment, !- Zone Conditioning Equipment List Name Basement Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Basement Air Node, !- Zone Air Node Name Basement Return Air Node;!- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, ER_Exam1_Mult4_Flr_1, !- Zone Name ER_Exam1_Mult4_Flr_1 Equipment, !- Zone Conditioning Equipment List Name ER_Exam1_Mult4_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name ER_Exam1_Mult4_Flr_1 Air Node, !- Zone Air Node Name ER_Exam1_Mult4_Flr_1 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, ER_Trauma1_Flr_1, !- Zone Name ER_Trauma1_Flr_1 Equipment, !- Zone Conditioning Equipment List Name ER_Trauma1_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name ER_Trauma1_Flr_1 Air Node, !- Zone Air Node Name ER_Trauma1_Flr_1 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, ER_Exam3_Mult4_Flr_1, !- Zone Name ER_Exam3_Mult4_Flr_1 Equipment, !- Zone Conditioning Equipment List Name ER_Exam3_Mult4_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name ER_Exam3_Mult4_Flr_1 Air Node, !- Zone Air Node Name ER_Exam3_Mult4_Flr_1 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, ER_Trauma2_Flr_1, !- Zone Name ER_Trauma2_Flr_1 Equipment, !- Zone Conditioning Equipment List Name ER_Trauma2_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name ER_Trauma2_Flr_1 Air Node, !- Zone Air Node Name ER_Trauma2_Flr_1 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, ER_Triage_Mult4_Flr_1, !- Zone Name ER_Triage_Mult4_Flr_1 Equipment, !- Zone Conditioning Equipment List Name ER_Triage_Mult4_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name ER_Triage_Mult4_Flr_1 Air Node, !- Zone Air Node Name ER_Triage_Mult4_Flr_1 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Office1_Mult4_Flr_1, !- Zone Name Office1_Mult4_Flr_1 Equipment, !- Zone Conditioning Equipment List Name Office1_Mult4_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Office1_Mult4_Flr_1 Air Node, !- Zone Air Node Name Office1_Mult4_Flr_1 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Lobby_Records_Flr_1, !- Zone Name Lobby_Records_Flr_1 Equipment, !- Zone Conditioning Equipment List Name Lobby_Records_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Lobby_Records_Flr_1 Air Node, !- Zone Air Node Name Lobby_Records_Flr_1 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Corridor_Flr_1, !- Zone Name Corridor_Flr_1 Equipment,!- Zone Conditioning Equipment List Name Corridor_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Corridor_Flr_1 Air Node, !- Zone Air Node Name Corridor_Flr_1 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, ER_NurseStn_Lobby_Flr_1, !- Zone Name ER_NurseStn_Lobby_Flr_1 Equipment, !- Zone Conditioning Equipment List Name ER_NurseStn_Lobby_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name ER_NurseStn_Lobby_Flr_1 Air Node, !- Zone Air Node Name ER_NurseStn_Lobby_Flr_1 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, OR1_Flr_2, !- Zone Name OR1_Flr_2 Equipment, !- Zone Conditioning Equipment List Name OR1_Flr_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name OR1_Flr_2 Air Node, !- Zone Air Node Name OR1_Flr_2 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, OR2_Mult5_Flr_2, !- Zone Name OR2_Mult5_Flr_2 Equipment, !- Zone Conditioning Equipment List Name OR2_Mult5_Flr_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name OR2_Mult5_Flr_2 Air Node,!- Zone Air Node Name OR2_Mult5_Flr_2 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, OR3_Flr_2, !- Zone Name OR3_Flr_2 Equipment, !- Zone Conditioning Equipment List Name OR3_Flr_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name OR3_Flr_2 Air Node, !- Zone Air Node Name OR3_Flr_2 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, OR4_Flr_2, !- Zone Name OR4_Flr_2 Equipment, !- Zone Conditioning Equipment List Name OR4_Flr_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name OR4_Flr_2 Air Node, !- Zone Air Node Name OR4_Flr_2 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, IC_PatRoom1_Mult5_Flr_2, !- Zone Name IC_PatRoom1_Mult5_Flr_2 Equipment, !- Zone Conditioning Equipment List Name IC_PatRoom1_Mult5_Flr_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name IC_PatRoom1_Mult5_Flr_2 Air Node, !- Zone Air Node Name IC_PatRoom1_Mult5_Flr_2 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, IC_PatRoom2_Flr_2, !- Zone Name IC_PatRoom2_Flr_2 Equipment, !- Zone Conditioning Equipment List Name IC_PatRoom2_Flr_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name IC_PatRoom2_Flr_2 Air Node, !- Zone Air Node Name IC_PatRoom2_Flr_2 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, IC_PatRoom3_Mult6_Flr_2, !- Zone Name IC_PatRoom3_Mult6_Flr_2 Equipment, !- Zone Conditioning Equipment List Name IC_PatRoom3_Mult6_Flr_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name IC_PatRoom3_Mult6_Flr_2 Air Node, !- Zone Air Node Name IC_PatRoom3_Mult6_Flr_2 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, ICU_Flr_2, !- Zone Name ICU_Flr_2 Equipment, !- Zone Conditioning Equipment List Name ICU_Flr_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name ICU_Flr_2 Air Node, !- Zone Air Node Name ICU_Flr_2 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, ICU_NurseStn_Lobby_Flr_2,!- Zone Name ICU_NurseStn_Lobby_Flr_2 Equipment, !- Zone Conditioning Equipment List Name ICU_NurseStn_Lobby_Flr_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name ICU_NurseStn_Lobby_Flr_2 Air Node, !- Zone Air Node Name ICU_NurseStn_Lobby_Flr_2 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Corridor_Flr_2, !- Zone Name Corridor_Flr_2 Equipment,!- Zone Conditioning Equipment List Name Corridor_Flr_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Corridor_Flr_2 Air Node, !- Zone Air Node Name Corridor_Flr_2 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, OR_NurseStn_Lobby_Flr_2, !- Zone Name OR_NurseStn_Lobby_Flr_2 Equipment, !- Zone Conditioning Equipment List Name OR_NurseStn_Lobby_Flr_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name OR_NurseStn_Lobby_Flr_2 Air Node, !- Zone Air Node Name OR_NurseStn_Lobby_Flr_2 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, PatRoom1_Mult10_Flr_3, !- Zone Name PatRoom1_Mult10_Flr_3 Equipment, !- Zone Conditioning Equipment List Name PatRoom1_Mult10_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name PatRoom1_Mult10_Flr_3 Air Node, !- Zone Air Node Name PatRoom1_Mult10_Flr_3 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, PatRoom2_Flr_3, !- Zone Name PatRoom2_Flr_3 Equipment,!- Zone Conditioning Equipment List Name PatRoom2_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name PatRoom2_Flr_3 Air Node, !- Zone Air Node Name PatRoom2_Flr_3 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, PatRoom3_Mult10_Flr_3, !- Zone Name PatRoom3_Mult10_Flr_3 Equipment, !- Zone Conditioning Equipment List Name PatRoom3_Mult10_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name PatRoom3_Mult10_Flr_3 Air Node, !- Zone Air Node Name PatRoom3_Mult10_Flr_3 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, PatRoom4_Flr_3, !- Zone Name PatRoom4_Flr_3 Equipment,!- Zone Conditioning Equipment List Name PatRoom4_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name PatRoom4_Flr_3 Air Node, !- Zone Air Node Name PatRoom4_Flr_3 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, PatRoom5_Mult10_Flr_3, !- Zone Name PatRoom5_Mult10_Flr_3 Equipment, !- Zone Conditioning Equipment List Name PatRoom5_Mult10_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name PatRoom5_Mult10_Flr_3 Air Node, !- Zone Air Node Name PatRoom5_Mult10_Flr_3 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, PhysTherapy_Flr_3, !- Zone Name PhysTherapy_Flr_3 Equipment, !- Zone Conditioning Equipment List Name PhysTherapy_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name PhysTherapy_Flr_3 Air Node, !- Zone Air Node Name PhysTherapy_Flr_3 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, PatRoom6_Flr_3, !- Zone Name PatRoom6_Flr_3 Equipment,!- Zone Conditioning Equipment List Name PatRoom6_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name PatRoom6_Flr_3 Air Node, !- Zone Air Node Name PatRoom6_Flr_3 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, PatRoom7_Mult10_Flr_3, !- Zone Name PatRoom7_Mult10_Flr_3 Equipment, !- Zone Conditioning Equipment List Name PatRoom7_Mult10_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name PatRoom7_Mult10_Flr_3 Air Node, !- Zone Air Node Name PatRoom7_Mult10_Flr_3 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, PatRoom8_Flr_3, !- Zone Name PatRoom8_Flr_3 Equipment,!- Zone Conditioning Equipment List Name PatRoom8_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name PatRoom8_Flr_3 Air Node, !- Zone Air Node Name PatRoom8_Flr_3 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, NurseStn_Lobby_Flr_3, !- Zone Name NurseStn_Lobby_Flr_3 Equipment, !- Zone Conditioning Equipment List Name NurseStn_Lobby_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name NurseStn_Lobby_Flr_3 Air Node, !- Zone Air Node Name NurseStn_Lobby_Flr_3 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Lab_Flr_3, !- Zone Name Lab_Flr_3 Equipment, !- Zone Conditioning Equipment List Name Lab_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Lab_Flr_3 Air Node, !- Zone Air Node Name Lab_Flr_3 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Corridor_SE_Flr_3, !- Zone Name Corridor_SE_Flr_3 Equipment, !- Zone Conditioning Equipment List Name Corridor_SE_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Corridor_SE_Flr_3 Air Node, !- Zone Air Node Name Corridor_SE_Flr_3 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Corridor_NW_Flr_3, !- Zone Name Corridor_NW_Flr_3 Equipment, !- Zone Conditioning Equipment List Name Corridor_NW_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Corridor_NW_Flr_3 Air Node, !- Zone Air Node Name Corridor_NW_Flr_3 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, PatRoom1_Mult10_Flr_4, !- Zone Name PatRoom1_Mult10_Flr_4 Equipment, !- Zone Conditioning Equipment List Name PatRoom1_Mult10_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name PatRoom1_Mult10_Flr_4 Air Node, !- Zone Air Node Name PatRoom1_Mult10_Flr_4 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, PatRoom2_Flr_4, !- Zone Name PatRoom2_Flr_4 Equipment,!- Zone Conditioning Equipment List Name PatRoom2_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name PatRoom2_Flr_4 Air Node, !- Zone Air Node Name PatRoom2_Flr_4 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, PatRoom3_Mult10_Flr_4, !- Zone Name PatRoom3_Mult10_Flr_4 Equipment, !- Zone Conditioning Equipment List Name PatRoom3_Mult10_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name PatRoom3_Mult10_Flr_4 Air Node, !- Zone Air Node Name PatRoom3_Mult10_Flr_4 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, PatRoom4_Flr_4, !- Zone Name PatRoom4_Flr_4 Equipment,!- Zone Conditioning Equipment List Name PatRoom4_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name PatRoom4_Flr_4 Air Node, !- Zone Air Node Name PatRoom4_Flr_4 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, PatRoom5_Mult10_Flr_4, !- Zone Name PatRoom5_Mult10_Flr_4 Equipment, !- Zone Conditioning Equipment List Name PatRoom5_Mult10_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name PatRoom5_Mult10_Flr_4 Air Node, !- Zone Air Node Name PatRoom5_Mult10_Flr_4 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Radiology_Flr_4, !- Zone Name Radiology_Flr_4 Equipment, !- Zone Conditioning Equipment List Name Radiology_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Radiology_Flr_4 Air Node,!- Zone Air Node Name Radiology_Flr_4 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, PatRoom6_Flr_4, !- Zone Name PatRoom6_Flr_4 Equipment,!- Zone Conditioning Equipment List Name PatRoom6_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name PatRoom6_Flr_4 Air Node, !- Zone Air Node Name PatRoom6_Flr_4 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, PatRoom7_Mult10_Flr_4, !- Zone Name PatRoom7_Mult10_Flr_4 Equipment, !- Zone Conditioning Equipment List Name PatRoom7_Mult10_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name PatRoom7_Mult10_Flr_4 Air Node, !- Zone Air Node Name PatRoom7_Mult10_Flr_4 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, PatRoom8_Flr_4, !- Zone Name PatRoom8_Flr_4 Equipment,!- Zone Conditioning Equipment List Name PatRoom8_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name PatRoom8_Flr_4 Air Node, !- Zone Air Node Name PatRoom8_Flr_4 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, NurseStn_Lobby_Flr_4, !- Zone Name NurseStn_Lobby_Flr_4 Equipment, !- Zone Conditioning Equipment List Name NurseStn_Lobby_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name NurseStn_Lobby_Flr_4 Air Node, !- Zone Air Node Name NurseStn_Lobby_Flr_4 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Lab_Flr_4, !- Zone Name Lab_Flr_4 Equipment, !- Zone Conditioning Equipment List Name Lab_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Lab_Flr_4 Air Node, !- Zone Air Node Name Lab_Flr_4 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Corridor_SE_Flr_4, !- Zone Name Corridor_SE_Flr_4 Equipment, !- Zone Conditioning Equipment List Name Corridor_SE_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Corridor_SE_Flr_4 Air Node, !- Zone Air Node Name Corridor_SE_Flr_4 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Corridor_NW_Flr_4, !- Zone Name Corridor_NW_Flr_4 Equipment, !- Zone Conditioning Equipment List Name Corridor_NW_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Corridor_NW_Flr_4 Air Node, !- Zone Air Node Name Corridor_NW_Flr_4 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Dining_Flr_5, !- Zone Name Dining_Flr_5 Equipment, !- Zone Conditioning Equipment List Name Dining_Flr_5 Inlet Nodes,!- Zone Air Inlet Node or NodeList Name Dining_Flr_5 Dummy Exhaust Fan Node, !- Zone Air Exhaust Node or NodeList Name Dining_Flr_5 Air Node, !- Zone Air Node Name Dining_Flr_5 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, NurseStn_Lobby_Flr_5, !- Zone Name NurseStn_Lobby_Flr_5 Equipment, !- Zone Conditioning Equipment List Name NurseStn_Lobby_Flr_5 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name NurseStn_Lobby_Flr_5 Dummy Exhaust Fan Node, !- Zone Air Exhaust Node or NodeList Name NurseStn_Lobby_Flr_5 Air Node, !- Zone Air Node Name NurseStn_Lobby_Flr_5 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Kitchen_Flr_5, !- Zone Name Kitchen_Flr_5 Equipment, !- Zone Conditioning Equipment List Name Kitchen_Flr_5 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name Kitchen_Flr_5 Exhaust Nodes, !- Zone Air Exhaust Node or NodeList Name Kitchen_Flr_5 Air Node, !- Zone Air Node Name Kitchen_Flr_5 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Office1_Flr_5, !- Zone Name Office1_Flr_5 Equipment, !- Zone Conditioning Equipment List Name Office1_Flr_5 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name Office1_Flr_5 Dummy Exhaust Fan Node, !- Zone Air Exhaust Node or NodeList Name Office1_Flr_5 Air Node, !- Zone Air Node Name Office1_Flr_5 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Office2_Mult5_Flr_5, !- Zone Name Office2_Mult5_Flr_5 Equipment, !- Zone Conditioning Equipment List Name Office2_Mult5_Flr_5 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name Office2_Mult5_Flr_5 Dummy Exhaust Fan Node, !- Zone Air Exhaust Node or NodeList Name Office2_Mult5_Flr_5 Air Node, !- Zone Air Node Name Office2_Mult5_Flr_5 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Office3_Flr_5, !- Zone Name Office3_Flr_5 Equipment, !- Zone Conditioning Equipment List Name Office3_Flr_5 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name Office3_Flr_5 Dummy Exhaust Fan Node, !- Zone Air Exhaust Node or NodeList Name Office3_Flr_5 Air Node, !- Zone Air Node Name Office3_Flr_5 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Office4_Mult6_Flr_5, !- Zone Name Office4_Mult6_Flr_5 Equipment, !- Zone Conditioning Equipment List Name Office4_Mult6_Flr_5 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name Office4_Mult6_Flr_5 Dummy Exhaust Fan Node, !- Zone Air Exhaust Node or NodeList Name Office4_Mult6_Flr_5 Air Node, !- Zone Air Node Name Office4_Mult6_Flr_5 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Corridor_Flr_5, !- Zone Name Corridor_Flr_5 Equipment,!- Zone Conditioning Equipment List Name Corridor_Flr_5 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name Corridor_Flr_5 Dummy Exhaust Fan Node, !- Zone Air Exhaust Node or NodeList Name Corridor_Flr_5 Air Node, !- Zone Air Node Name Corridor_Flr_5 Return Air Node; !- Zone Return Air Node or NodeList Name !- =========== ALL OBJECTS IN CLASS: ZONE EQUIPMENT LIST =========== ZoneHVAC:EquipmentList, Basement Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Basement VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, ER_Exam1_Mult4_Flr_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type ER_Exam1_Mult4_Flr_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, ER_Trauma1_Flr_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type ER_Trauma1_Flr_1 VAV Box,!- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, ER_Exam3_Mult4_Flr_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type ER_Exam3_Mult4_Flr_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, ER_Trauma2_Flr_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type ER_Trauma2_Flr_1 VAV Box,!- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, ER_Triage_Mult4_Flr_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type ER_Triage_Mult4_Flr_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Office1_Mult4_Flr_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Office1_Mult4_Flr_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Lobby_Records_Flr_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Lobby_Records_Flr_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Corridor_Flr_1 Equipment,!- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Corridor_Flr_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, ER_NurseStn_Lobby_Flr_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type ER_NurseStn_Lobby_Flr_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, OR1_Flr_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type OR1_Flr_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, OR2_Mult5_Flr_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type OR2_Mult5_Flr_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, OR3_Flr_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type OR3_Flr_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, OR4_Flr_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type OR4_Flr_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, IC_PatRoom1_Mult5_Flr_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type IC_PatRoom1_Mult5_Flr_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, IC_PatRoom2_Flr_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type IC_PatRoom2_Flr_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, IC_PatRoom3_Mult6_Flr_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type IC_PatRoom3_Mult6_Flr_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, ICU_Flr_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type ICU_Flr_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, ICU_NurseStn_Lobby_Flr_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type ICU_NurseStn_Lobby_Flr_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Corridor_Flr_2 Equipment,!- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Corridor_Flr_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, OR_NurseStn_Lobby_Flr_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type OR_NurseStn_Lobby_Flr_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, PatRoom1_Mult10_Flr_3 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type PatRoom1_Mult10_Flr_3 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, PatRoom2_Flr_3 Equipment,!- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type PatRoom2_Flr_3 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, PatRoom3_Mult10_Flr_3 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type PatRoom3_Mult10_Flr_3 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, PatRoom4_Flr_3 Equipment,!- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type PatRoom4_Flr_3 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, PatRoom5_Mult10_Flr_3 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type PatRoom5_Mult10_Flr_3 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, PhysTherapy_Flr_3 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type PhysTherapy_Flr_3 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, PatRoom6_Flr_3 Equipment,!- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type PatRoom6_Flr_3 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, PatRoom7_Mult10_Flr_3 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type PatRoom7_Mult10_Flr_3 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, PatRoom8_Flr_3 Equipment,!- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type PatRoom8_Flr_3 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, NurseStn_Lobby_Flr_3 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type NurseStn_Lobby_Flr_3 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Lab_Flr_3 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Lab_Flr_3 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Corridor_SE_Flr_3 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Corridor_SE_Flr_3 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Corridor_NW_Flr_3 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Corridor_NW_Flr_3 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, PatRoom1_Mult10_Flr_4 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type PatRoom1_Mult10_Flr_4 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, PatRoom2_Flr_4 Equipment,!- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type PatRoom2_Flr_4 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, PatRoom3_Mult10_Flr_4 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type PatRoom3_Mult10_Flr_4 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, PatRoom4_Flr_4 Equipment,!- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type PatRoom4_Flr_4 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, PatRoom5_Mult10_Flr_4 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type PatRoom5_Mult10_Flr_4 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Radiology_Flr_4 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Radiology_Flr_4 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, PatRoom6_Flr_4 Equipment,!- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type PatRoom6_Flr_4 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, PatRoom7_Mult10_Flr_4 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type PatRoom7_Mult10_Flr_4 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, PatRoom8_Flr_4 Equipment,!- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type PatRoom8_Flr_4 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, NurseStn_Lobby_Flr_4 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type NurseStn_Lobby_Flr_4 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Lab_Flr_4 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Lab_Flr_4 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Corridor_SE_Flr_4 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Corridor_SE_Flr_4 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Corridor_NW_Flr_4 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Corridor_NW_Flr_4 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Dining_Flr_5 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme Fan:ZoneExhaust, !- Zone Equipment 1 Object Type Dining_Flr_5 Dummy Exhaust Fan, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:AirDistributionUnit, !- Zone Equipment 2 Object Type Dining_Flr_5 VAV Box, !- Zone Equipment 2 Name 2, !- Zone Equipment 2 Cooling Sequence 2; !- Zone Equipment 2 Heating or No-Load Sequence ZoneHVAC:EquipmentList, NurseStn_Lobby_Flr_5 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme Fan:ZoneExhaust, !- Zone Equipment 1 Object Type NurseStn_Lobby_Flr_5 Dummy Exhaust Fan, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:AirDistributionUnit, !- Zone Equipment 2 Object Type NurseStn_Lobby_Flr_5 VAV Box, !- Zone Equipment 2 Name 2, !- Zone Equipment 2 Cooling Sequence 2; !- Zone Equipment 2 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Kitchen_Flr_5 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme Fan:ZoneExhaust, !- Zone Equipment 1 Object Type Kitchen_Flr_5 Exhaust Fan, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 2 Object Type Kitchen_Flr_5 CAV Box, !- Zone Equipment 2 Name 2, !- Zone Equipment 2 Cooling Sequence 2; !- Zone Equipment 2 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Office1_Flr_5 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme Fan:ZoneExhaust, !- Zone Equipment 1 Object Type Office1_Flr_5 Dummy Exhaust Fan, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:AirDistributionUnit, !- Zone Equipment 2 Object Type Office1_Flr_5 VAV Box, !- Zone Equipment 2 Name 2, !- Zone Equipment 2 Cooling Sequence 2; !- Zone Equipment 2 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Office2_Mult5_Flr_5 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme Fan:ZoneExhaust, !- Zone Equipment 1 Object Type Office2_Mult5_Flr_5 Dummy Exhaust Fan, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:AirDistributionUnit, !- Zone Equipment 2 Object Type Office2_Mult5_Flr_5 VAV Box, !- Zone Equipment 2 Name 2, !- Zone Equipment 2 Cooling Sequence 2; !- Zone Equipment 2 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Office3_Flr_5 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme Fan:ZoneExhaust, !- Zone Equipment 1 Object Type Office3_Flr_5 Dummy Exhaust Fan, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:AirDistributionUnit, !- Zone Equipment 2 Object Type Office3_Flr_5 VAV Box, !- Zone Equipment 2 Name 2, !- Zone Equipment 2 Cooling Sequence 2; !- Zone Equipment 2 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Office4_Mult6_Flr_5 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme Fan:ZoneExhaust, !- Zone Equipment 1 Object Type Office4_Mult6_Flr_5 Dummy Exhaust Fan, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:AirDistributionUnit, !- Zone Equipment 2 Object Type Office4_Mult6_Flr_5 VAV Box, !- Zone Equipment 2 Name 2, !- Zone Equipment 2 Cooling Sequence 2; !- Zone Equipment 2 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Corridor_Flr_5 Equipment,!- Name SequentialLoad, !- Load Distribution Scheme Fan:ZoneExhaust, !- Zone Equipment 1 Object Type Corridor_Flr_5 Dummy Exhaust Fan, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:AirDistributionUnit, !- Zone Equipment 2 Object Type Corridor_Flr_5 VAV Box, !- Zone Equipment 2 Name 2, !- Zone Equipment 2 Cooling Sequence 2; !- Zone Equipment 2 Heating or No-Load Sequence !- =========== ALL OBJECTS IN CLASS: AIR DISTRIBUTION UNIT =========== ZoneHVAC:AirDistributionUnit, Basement VAV Box, !- Name Basement VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Basement VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, ER_Exam1_Mult4_Flr_1 VAV Box, !- Name ER_Exam1_Mult4_Flr_1 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type ER_Exam1_Mult4_Flr_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, ER_Trauma1_Flr_1 VAV Box,!- Name ER_Trauma1_Flr_1 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type ER_Trauma1_Flr_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, ER_Exam3_Mult4_Flr_1 VAV Box, !- Name ER_Exam3_Mult4_Flr_1 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type ER_Exam3_Mult4_Flr_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, ER_Trauma2_Flr_1 VAV Box,!- Name ER_Trauma2_Flr_1 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type ER_Trauma2_Flr_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, ER_Triage_Mult4_Flr_1 VAV Box, !- Name ER_Triage_Mult4_Flr_1 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type ER_Triage_Mult4_Flr_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Office1_Mult4_Flr_1 VAV Box, !- Name Office1_Mult4_Flr_1 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Office1_Mult4_Flr_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Lobby_Records_Flr_1 VAV Box, !- Name Lobby_Records_Flr_1 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Lobby_Records_Flr_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Corridor_Flr_1 VAV Box, !- Name Corridor_Flr_1 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corridor_Flr_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, ER_NurseStn_Lobby_Flr_1 VAV Box, !- Name ER_NurseStn_Lobby_Flr_1 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type ER_NurseStn_Lobby_Flr_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, OR1_Flr_2 VAV Box, !- Name OR1_Flr_2 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type OR1_Flr_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, OR2_Mult5_Flr_2 VAV Box, !- Name OR2_Mult5_Flr_2 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type OR2_Mult5_Flr_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, OR3_Flr_2 VAV Box, !- Name OR3_Flr_2 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type OR3_Flr_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, OR4_Flr_2 VAV Box, !- Name OR4_Flr_2 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type OR4_Flr_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, IC_PatRoom1_Mult5_Flr_2 VAV Box, !- Name IC_PatRoom1_Mult5_Flr_2 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type IC_PatRoom1_Mult5_Flr_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, IC_PatRoom2_Flr_2 VAV Box, !- Name IC_PatRoom2_Flr_2 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type IC_PatRoom2_Flr_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, IC_PatRoom3_Mult6_Flr_2 VAV Box, !- Name IC_PatRoom3_Mult6_Flr_2 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type IC_PatRoom3_Mult6_Flr_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, ICU_Flr_2 VAV Box, !- Name ICU_Flr_2 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type ICU_Flr_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, ICU_NurseStn_Lobby_Flr_2 VAV Box, !- Name ICU_NurseStn_Lobby_Flr_2 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type ICU_NurseStn_Lobby_Flr_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Corridor_Flr_2 VAV Box, !- Name Corridor_Flr_2 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corridor_Flr_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, OR_NurseStn_Lobby_Flr_2 VAV Box, !- Name OR_NurseStn_Lobby_Flr_2 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type OR_NurseStn_Lobby_Flr_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, PatRoom1_Mult10_Flr_3 VAV Box, !- Name PatRoom1_Mult10_Flr_3 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type PatRoom1_Mult10_Flr_3 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, PatRoom2_Flr_3 VAV Box, !- Name PatRoom2_Flr_3 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type PatRoom2_Flr_3 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, PatRoom3_Mult10_Flr_3 VAV Box, !- Name PatRoom3_Mult10_Flr_3 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type PatRoom3_Mult10_Flr_3 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, PatRoom4_Flr_3 VAV Box, !- Name PatRoom4_Flr_3 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type PatRoom4_Flr_3 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, PatRoom5_Mult10_Flr_3 VAV Box, !- Name PatRoom5_Mult10_Flr_3 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type PatRoom5_Mult10_Flr_3 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, PhysTherapy_Flr_3 VAV Box, !- Name PhysTherapy_Flr_3 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type PhysTherapy_Flr_3 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, PatRoom6_Flr_3 VAV Box, !- Name PatRoom6_Flr_3 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type PatRoom6_Flr_3 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, PatRoom7_Mult10_Flr_3 VAV Box, !- Name PatRoom7_Mult10_Flr_3 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type PatRoom7_Mult10_Flr_3 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, PatRoom8_Flr_3 VAV Box, !- Name PatRoom8_Flr_3 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type PatRoom8_Flr_3 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, NurseStn_Lobby_Flr_3 VAV Box, !- Name NurseStn_Lobby_Flr_3 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type NurseStn_Lobby_Flr_3 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Lab_Flr_3 VAV Box, !- Name Lab_Flr_3 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Lab_Flr_3 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Corridor_SE_Flr_3 VAV Box, !- Name Corridor_SE_Flr_3 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corridor_SE_Flr_3 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Corridor_NW_Flr_3 VAV Box, !- Name Corridor_NW_Flr_3 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corridor_NW_Flr_3 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, PatRoom1_Mult10_Flr_4 VAV Box, !- Name PatRoom1_Mult10_Flr_4 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type PatRoom1_Mult10_Flr_4 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, PatRoom2_Flr_4 VAV Box, !- Name PatRoom2_Flr_4 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type PatRoom2_Flr_4 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, PatRoom3_Mult10_Flr_4 VAV Box, !- Name PatRoom3_Mult10_Flr_4 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type PatRoom3_Mult10_Flr_4 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, PatRoom4_Flr_4 VAV Box, !- Name PatRoom4_Flr_4 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type PatRoom4_Flr_4 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, PatRoom5_Mult10_Flr_4 VAV Box, !- Name PatRoom5_Mult10_Flr_4 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type PatRoom5_Mult10_Flr_4 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Radiology_Flr_4 VAV Box, !- Name Radiology_Flr_4 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Radiology_Flr_4 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, PatRoom6_Flr_4 VAV Box, !- Name PatRoom6_Flr_4 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type PatRoom6_Flr_4 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, PatRoom7_Mult10_Flr_4 VAV Box, !- Name PatRoom7_Mult10_Flr_4 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type PatRoom7_Mult10_Flr_4 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, PatRoom8_Flr_4 VAV Box, !- Name PatRoom8_Flr_4 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type PatRoom8_Flr_4 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, NurseStn_Lobby_Flr_4 VAV Box, !- Name NurseStn_Lobby_Flr_4 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type NurseStn_Lobby_Flr_4 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Lab_Flr_4 VAV Box, !- Name Lab_Flr_4 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Lab_Flr_4 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Corridor_SE_Flr_4 VAV Box, !- Name Corridor_SE_Flr_4 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corridor_SE_Flr_4 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Corridor_NW_Flr_4 VAV Box, !- Name Corridor_NW_Flr_4 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corridor_NW_Flr_4 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Dining_Flr_5 VAV Box, !- Name Dining_Flr_5 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Dining_Flr_5 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, NurseStn_Lobby_Flr_5 VAV Box, !- Name NurseStn_Lobby_Flr_5 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type NurseStn_Lobby_Flr_5 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Office1_Flr_5 VAV Box, !- Name Office1_Flr_5 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Office1_Flr_5 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Office2_Mult5_Flr_5 VAV Box, !- Name Office2_Mult5_Flr_5 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Office2_Mult5_Flr_5 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Office3_Flr_5 VAV Box, !- Name Office3_Flr_5 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Office3_Flr_5 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Office4_Mult6_Flr_5 VAV Box, !- Name Office4_Mult6_Flr_5 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Office4_Mult6_Flr_5 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Corridor_Flr_5 VAV Box, !- Name Corridor_Flr_5 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corridor_Flr_5 VAV Box Component; !- Air Terminal Name !- =========== ALL OBJECTS IN CLASS: COMPRESSOR RACK:REFRIGERATED CASE =========== Refrigeration:CompressorRack, RACK1, !- Name OUTDOORS, !- Heat Rejection Location 2.3, !- Design Compressor Rack COP {W/W} RACK1_RackCOPfTCurve, !- Compressor Rack COP Function of Temperature Curve Name 1000.0000, !- Design Condenser Fan Power {W} RACK1_RackCondFanCurve2, !- Condenser Fan Power Function of Temperature Curve Name AirCooled, !- Condenser Type , !- Water-Cooled Condenser Inlet Node Name , !- Water-Cooled Condenser Outlet Node Name , !- Water-Cooled Loop Flow Type , !- Water-Cooled Condenser Outlet Temperature Schedule Name , !- Water-Cooled Condenser Design Flow Rate {m3/s} , !- Water-Cooled Condenser Maximum Flow Rate {m3/s} , !- Water-Cooled Condenser Maximum Water Outlet Temperature {C} , !- Water-Cooled Condenser Minimum Water Inlet Temperature {C} , !- Evaporative Condenser Availability Schedule Name , !- Evaporative Condenser Effectiveness {dimensionless} , !- Evaporative Condenser Air Flow Rate {m3/s} , !- Basin Heater Capacity {W/K} , !- Basin Heater Setpoint Temperature {C} , !- Design Evaporative Condenser Water Pump Power {W} , !- Evaporative Water Supply Tank Name RACK1_condenserInlet, !- Condenser Air Inlet Node Name LowTempRefrigeration, !- End-Use Subcategory RACK1CaseList; !- Refrigeration Case Name or WalkIn Name or CaseAndWalkInList Name Refrigeration:CaseAndWalkInList, RACK1CaseList, !- Name Kitchen_Flr_5_Case:1_WALKINFREEZER; !- Case or WalkIn 1 Name Refrigeration:CompressorRack, RACK2, !- Name OUTDOORS, !- Heat Rejection Location 6.93, !- Design Compressor Rack COP {W/W} RACK2_RackCOPfTCurve, !- Compressor Rack COP Function of Temperature Curve Name 1000.0000, !- Design Condenser Fan Power {W} , !- Condenser Fan Power Function of Temperature Curve Name AirCooled, !- Condenser Type , !- Water-Cooled Condenser Inlet Node Name , !- Water-Cooled Condenser Outlet Node Name , !- Water-Cooled Loop Flow Type , !- Water-Cooled Condenser Outlet Temperature Schedule Name , !- Water-Cooled Condenser Design Flow Rate {m3/s} , !- Water-Cooled Condenser Maximum Flow Rate {m3/s} , !- Water-Cooled Condenser Maximum Water Outlet Temperature {C} , !- Water-Cooled Condenser Minimum Water Inlet Temperature {C} , !- Evaporative Condenser Availability Schedule Name , !- Evaporative Condenser Effectiveness {dimensionless} , !- Evaporative Condenser Air Flow Rate {m3/s} , !- Basin Heater Capacity {W/K} , !- Basin Heater Setpoint Temperature {C} , !- Design Evaporative Condenser Water Pump Power {W} , !- Evaporative Water Supply Tank Name RACK2_condenserInlet, !- Condenser Air Inlet Node Name MedTempRefrigeration, !- End-Use Subcategory RACK2CaseList; !- Refrigeration Case Name or WalkIn Name or CaseAndWalkInList Name Refrigeration:CaseAndWalkInList, RACK2CaseList, !- Name Kitchen_Flr_5_Case:2_SELFCONTAINEDDISPLAYCASE; !- Case or WalkIn 1 Name !- =========== ALL OBJECTS IN CLASS: CASE:REFRIGERATED =========== Refrigeration:Case, Kitchen_Flr_5_Case:1_WALKINFREEZER, !- Name ALWAYS_ON, !- Availability Schedule Name Kitchen_Flr_5, !- Zone Name 23.8800, !- Rated Ambient Temperature {C} 55.0000, !- Rated Ambient Relative Humidity {percent} 734.0000, !- Rated Total Cooling Capacity per Unit Length {W/m} 0.1000, !- Rated Latent Heat Ratio 0.4000, !- Rated Runtime Fraction 10.9800, !- Case Length {m} -23.0000, !- Case Operating Temperature {C} CaseTemperatureMethod, !- Latent Case Credit Curve Type Kitchen_Flr_5_Case:1_WALKINFREEZERSingleShelfHorizontal_LatentEnergyMult, !- Latent Case Credit Curve Name 19.71428571, !- Standard Case Fan Power per Unit Length {W/m} 19.71428571, !- Operating Case Fan Power per Unit Length {W/m} 33.0000, !- Standard Case Lighting Power per Unit Length {W/m} , !- Installed Case Lighting Power per Unit Length {W/m} walkin_occ_lght_sch, !- Case Lighting Schedule Name 1.0000, !- Fraction of Lighting Energy to Case 0.0000, !- Case Anti-Sweat Heater Power per Unit Length {W/m} 0.0000, !- Minimum Anti-Sweat Heater Power per Unit Length {W/m} NONE, !- Anti-Sweat Heater Control Type 0.0, !- Humidity at Zero Anti-Sweat Heater Energy {percent} 0.0, !- Case Height {m} 0.0000, !- Fraction of Anti-Sweat Heater Energy to Case 364.0000, !- Case Defrost Power per Unit Length {W/m} ELECTRIC, !- Case Defrost Type Kitchen_Flr_5_Case:1_WALKINFREEZER_CaseDefrost2aDaySched, !- Case Defrost Schedule Name Kitchen_Flr_5_Case:1_WALKINFREEZER_CaseDripDown2aDaySched, !- Case Defrost Drip-Down Schedule Name , !- Defrost Energy Correction Curve Type , !- Defrost Energy Correction Curve Name 0.0000, !- Under Case HVAC Return Air Fraction Kitchen_Flr_5_Case:1_WALKINFREEZER_WalkInStockingSched, !- Refrigerated Case Restocking Schedule Name Kitchen_Flr_5_Case:1_WALKINFREEZER_CaseCreditReduxSched; !- Case Credit Fraction Schedule Name Refrigeration:Case, Kitchen_Flr_5_Case:2_SELFCONTAINEDDISPLAYCASE, !- Name ALWAYS_ON, !- Availability Schedule Name Kitchen_Flr_5, !- Zone Name 23.8800, !- Rated Ambient Temperature {C} 55.0000, !- Rated Ambient Relative Humidity {percent} 886.5000, !- Rated Total Cooling Capacity per Unit Length {W/m} 0.0800, !- Rated Latent Heat Ratio 0.8500, !- Rated Runtime Fraction 8.9300, !- Case Length {m} 2.0000, !- Case Operating Temperature {C} CaseTemperatureMethod, !- Latent Case Credit Curve Type Kitchen_Flr_5_Case:2_SELFCONTAINEDDISPLAYCASEMultiShelfVertical_LatentEnergyMult, !- Latent Case Credit Curve Name 19.14285714, !- Standard Case Fan Power per Unit Length {W/m} 19.14285714, !- Operating Case Fan Power per Unit Length {W/m} 40.0000, !- Standard Case Lighting Power per Unit Length {W/m} , !- Installed Case Lighting Power per Unit Length {W/m} walkin_occ_lght_sch, !- Case Lighting Schedule Name 1.0000, !- Fraction of Lighting Energy to Case 0.0000, !- Case Anti-Sweat Heater Power per Unit Length {W/m} 0.0000, !- Minimum Anti-Sweat Heater Power per Unit Length {W/m} NONE, !- Anti-Sweat Heater Control Type 0.0, !- Humidity at Zero Anti-Sweat Heater Energy {percent} 0.0, !- Case Height {m} 0.2000, !- Fraction of Anti-Sweat Heater Energy to Case 0.0000, !- Case Defrost Power per Unit Length {W/m} NONE, !- Case Defrost Type , !- Case Defrost Schedule Name , !- Case Defrost Drip-Down Schedule Name , !- Defrost Energy Correction Curve Type , !- Defrost Energy Correction Curve Name 0.0500, !- Under Case HVAC Return Air Fraction Kitchen_Flr_5_Case:2_SELFCONTAINEDDISPLAYCASE_CaseStockingSched; !- Refrigerated Case Restocking Schedule Name !- =========== ALL OBJECTS IN CLASS: SINGLE DUCT:UNCONTROLLED =========== AirTerminal:SingleDuct:Uncontrolled, Kitchen_Flr_5 CAV Box, !- Name ALWAYS_ON, !- Availability Schedule Name Kitchen_Flr_5 Inlet Node,!- Zone Supply Air Node Name AUTOSIZE; !- Maximum Air Flow Rate {m3/s} !- =========== ALL OBJECTS IN CLASS: SINGLE DUCT:VAV:REHEAT =========== AirTerminal:SingleDuct:VAV:Reheat, ER_Exam1_Mult4_Flr_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name ER_Exam1_Mult4_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name ER_Exam1_Mult4_Flr_1 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0000, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type ER_Exam1_Mult4_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} ER_Exam1_Mult4_Flr_1 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, ER_Trauma1_Flr_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name ER_Trauma1_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name ER_Trauma1_Flr_1 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0000, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type ER_Trauma1_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} ER_Trauma1_Flr_1 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, ER_Exam3_Mult4_Flr_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name ER_Exam3_Mult4_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name ER_Exam3_Mult4_Flr_1 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0000, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type ER_Exam3_Mult4_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} ER_Exam3_Mult4_Flr_1 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, ER_Trauma2_Flr_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name ER_Trauma2_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name ER_Trauma2_Flr_1 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0000, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type ER_Trauma2_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} ER_Trauma2_Flr_1 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, ER_Triage_Mult4_Flr_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name ER_Triage_Mult4_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name ER_Triage_Mult4_Flr_1 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0000, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type ER_Triage_Mult4_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} ER_Triage_Mult4_Flr_1 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, OR1_Flr_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name OR1_Flr_2 VAV Box Damper Node, !- Damper Air Outlet Node Name OR1_Flr_2 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Scheduled, !- Zone Minimum Air Flow Input Method , !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} OR_MinSA_Sched, !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type OR1_Flr_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} OR1_Flr_2 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, OR2_Mult5_Flr_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name OR2_Mult5_Flr_2 VAV Box Damper Node, !- Damper Air Outlet Node Name OR2_Mult5_Flr_2 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Scheduled, !- Zone Minimum Air Flow Input Method , !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} OR_MinSA_Sched, !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type OR2_Mult5_Flr_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} OR2_Mult5_Flr_2 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, OR3_Flr_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name OR3_Flr_2 VAV Box Damper Node, !- Damper Air Outlet Node Name OR3_Flr_2 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Scheduled, !- Zone Minimum Air Flow Input Method , !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} OR_MinSA_Sched, !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type OR3_Flr_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} OR3_Flr_2 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, OR4_Flr_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name OR4_Flr_2 VAV Box Damper Node, !- Damper Air Outlet Node Name OR4_Flr_2 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Scheduled, !- Zone Minimum Air Flow Input Method , !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} OR_MinSA_Sched, !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type OR4_Flr_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} OR4_Flr_2 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, IC_PatRoom1_Mult5_Flr_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name IC_PatRoom1_Mult5_Flr_2 VAV Box Damper Node, !- Damper Air Outlet Node Name IC_PatRoom1_Mult5_Flr_2 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0000, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type IC_PatRoom1_Mult5_Flr_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} IC_PatRoom1_Mult5_Flr_2 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, IC_PatRoom2_Flr_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name IC_PatRoom2_Flr_2 VAV Box Damper Node, !- Damper Air Outlet Node Name IC_PatRoom2_Flr_2 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0000, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type IC_PatRoom2_Flr_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} IC_PatRoom2_Flr_2 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, IC_PatRoom3_Mult6_Flr_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name IC_PatRoom3_Mult6_Flr_2 VAV Box Damper Node, !- Damper Air Outlet Node Name IC_PatRoom3_Mult6_Flr_2 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0000, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type IC_PatRoom3_Mult6_Flr_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} IC_PatRoom3_Mult6_Flr_2 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, ICU_Flr_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name ICU_Flr_2 VAV Box Damper Node, !- Damper Air Outlet Node Name ICU_Flr_2 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0000, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type ICU_Flr_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} ICU_Flr_2 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, PatRoom1_Mult10_Flr_3 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name PatRoom1_Mult10_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name PatRoom1_Mult10_Flr_3 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.5, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type PatRoom1_Mult10_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} PatRoom1_Mult10_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, PatRoom2_Flr_3 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name PatRoom2_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name PatRoom2_Flr_3 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.5, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type PatRoom2_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} PatRoom2_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, PatRoom3_Mult10_Flr_3 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name PatRoom3_Mult10_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name PatRoom3_Mult10_Flr_3 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.5, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type PatRoom3_Mult10_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} PatRoom3_Mult10_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, PatRoom4_Flr_3 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name PatRoom4_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name PatRoom4_Flr_3 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.5, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type PatRoom4_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} PatRoom4_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, PatRoom5_Mult10_Flr_3 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name PatRoom5_Mult10_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name PatRoom5_Mult10_Flr_3 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.5, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type PatRoom5_Mult10_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} PatRoom5_Mult10_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, PatRoom6_Flr_3 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name PatRoom6_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name PatRoom6_Flr_3 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.5, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type PatRoom6_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} PatRoom6_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, PatRoom7_Mult10_Flr_3 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name PatRoom7_Mult10_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name PatRoom7_Mult10_Flr_3 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.5, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type PatRoom7_Mult10_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} PatRoom7_Mult10_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, PatRoom8_Flr_3 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name PatRoom8_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name PatRoom8_Flr_3 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.5, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type PatRoom8_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} PatRoom8_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Lab_Flr_3 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Lab_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name Lab_Flr_3 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0000, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Lab_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Lab_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, PatRoom1_Mult10_Flr_4 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name PatRoom1_Mult10_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name PatRoom1_Mult10_Flr_4 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.5, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type PatRoom1_Mult10_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} PatRoom1_Mult10_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, PatRoom2_Flr_4 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name PatRoom2_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name PatRoom2_Flr_4 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.5, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type PatRoom2_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} PatRoom2_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, PatRoom3_Mult10_Flr_4 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name PatRoom3_Mult10_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name PatRoom3_Mult10_Flr_4 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.5, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type PatRoom3_Mult10_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} PatRoom3_Mult10_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, PatRoom4_Flr_4 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name PatRoom4_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name PatRoom4_Flr_4 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.5, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type PatRoom4_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} PatRoom4_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, PatRoom5_Mult10_Flr_4 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name PatRoom5_Mult10_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name PatRoom5_Mult10_Flr_4 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.5, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type PatRoom5_Mult10_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} PatRoom5_Mult10_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, PatRoom6_Flr_4 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name PatRoom6_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name PatRoom6_Flr_4 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.5, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type PatRoom6_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} PatRoom6_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, PatRoom7_Mult10_Flr_4 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name PatRoom7_Mult10_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name PatRoom7_Mult10_Flr_4 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.5, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type PatRoom7_Mult10_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} PatRoom7_Mult10_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, PatRoom8_Flr_4 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name PatRoom8_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name PatRoom8_Flr_4 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.5, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type PatRoom8_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} PatRoom8_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Lab_Flr_4 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Lab_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name Lab_Flr_4 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0000, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Lab_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Lab_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Basement VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Basement VAV Box Damper Node, !- Damper Air Outlet Node Name Basement VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.44, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Basement VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Basement VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Office1_Mult4_Flr_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Office1_Mult4_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Office1_Mult4_Flr_1 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.15, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Office1_Mult4_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Office1_Mult4_Flr_1 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Lobby_Records_Flr_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Lobby_Records_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Lobby_Records_Flr_1 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.52, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Lobby_Records_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Lobby_Records_Flr_1 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Corridor_Flr_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corridor_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Corridor_Flr_1 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.609, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corridor_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corridor_Flr_1 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, ER_NurseStn_Lobby_Flr_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name ER_NurseStn_Lobby_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name ER_NurseStn_Lobby_Flr_1 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.241, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type ER_NurseStn_Lobby_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} ER_NurseStn_Lobby_Flr_1 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, ICU_NurseStn_Lobby_Flr_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name ICU_NurseStn_Lobby_Flr_2 VAV Box Damper Node, !- Damper Air Outlet Node Name ICU_NurseStn_Lobby_Flr_2 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.19, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type ICU_NurseStn_Lobby_Flr_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} ICU_NurseStn_Lobby_Flr_2 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Corridor_Flr_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corridor_Flr_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Corridor_Flr_2 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.645, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corridor_Flr_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corridor_Flr_2 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, OR_NurseStn_Lobby_Flr_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name OR_NurseStn_Lobby_Flr_2 VAV Box Damper Node, !- Damper Air Outlet Node Name OR_NurseStn_Lobby_Flr_2 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.236, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type OR_NurseStn_Lobby_Flr_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} OR_NurseStn_Lobby_Flr_2 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, PhysTherapy_Flr_3 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name PhysTherapy_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name PhysTherapy_Flr_3 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.263, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type PhysTherapy_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} PhysTherapy_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, NurseStn_Lobby_Flr_3 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name NurseStn_Lobby_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name NurseStn_Lobby_Flr_3 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.295, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type NurseStn_Lobby_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} NurseStn_Lobby_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Corridor_SE_Flr_3 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corridor_SE_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name Corridor_SE_Flr_3 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.567, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corridor_SE_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corridor_SE_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Corridor_NW_Flr_3 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corridor_NW_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name Corridor_NW_Flr_3 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.567, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corridor_NW_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corridor_NW_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Radiology_Flr_4 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Radiology_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name Radiology_Flr_4 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.066, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Radiology_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Radiology_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, NurseStn_Lobby_Flr_4 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name NurseStn_Lobby_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name NurseStn_Lobby_Flr_4 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.275, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type NurseStn_Lobby_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} NurseStn_Lobby_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Corridor_SE_Flr_4 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corridor_SE_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name Corridor_SE_Flr_4 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.5, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corridor_SE_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corridor_SE_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Corridor_NW_Flr_4 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corridor_NW_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name Corridor_NW_Flr_4 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.505, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corridor_NW_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corridor_NW_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Dining_Flr_5 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Dining_Flr_5 VAV Box Damper Node, !- Damper Air Outlet Node Name Dining_Flr_5 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.674, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Dining_Flr_5 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Dining_Flr_5 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, NurseStn_Lobby_Flr_5 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name NurseStn_Lobby_Flr_5 VAV Box Damper Node, !- Damper Air Outlet Node Name NurseStn_Lobby_Flr_5 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.221, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type NurseStn_Lobby_Flr_5 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} NurseStn_Lobby_Flr_5 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Office1_Flr_5 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Office1_Flr_5 VAV Box Damper Node, !- Damper Air Outlet Node Name Office1_Flr_5 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.186, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Office1_Flr_5 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Office1_Flr_5 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Office2_Mult5_Flr_5 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Office2_Mult5_Flr_5 VAV Box Damper Node, !- Damper Air Outlet Node Name Office2_Mult5_Flr_5 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.276, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Office2_Mult5_Flr_5 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Office2_Mult5_Flr_5 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Office3_Flr_5 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Office3_Flr_5 VAV Box Damper Node, !- Damper Air Outlet Node Name Office3_Flr_5 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.159, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Office3_Flr_5 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Office3_Flr_5 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Office4_Mult6_Flr_5 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Office4_Mult6_Flr_5 VAV Box Damper Node, !- Damper Air Outlet Node Name Office4_Mult6_Flr_5 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.137, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Office4_Mult6_Flr_5 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Office4_Mult6_Flr_5 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Corridor_Flr_5 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corridor_Flr_5 VAV Box Damper Node, !- Damper Air Outlet Node Name Corridor_Flr_5 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.332, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corridor_Flr_5 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corridor_Flr_5 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} !- =========== ALL OBJECTS IN CLASS: ZONE CONTROL:THERMOSTATIC =========== ZoneControl:Thermostat, Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name ZoneControl:Thermostat, ER_Exam1_Mult4_Flr_1 Thermostat, !- Name ER_Exam1_Mult4_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Exam1_Mult4_Flr_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, ER_Trauma1_Flr_1 Thermostat, !- Name ER_Trauma1_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Trauma1_Flr_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, ER_Exam3_Mult4_Flr_1 Thermostat, !- Name ER_Exam3_Mult4_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Exam3_Mult4_Flr_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, ER_Trauma2_Flr_1 Thermostat, !- Name ER_Trauma2_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Trauma2_Flr_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, ER_Triage_Mult4_Flr_1 Thermostat, !- Name ER_Triage_Mult4_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Triage_Mult4_Flr_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Office1_Mult4_Flr_1 Thermostat, !- Name Office1_Mult4_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office1_Mult4_Flr_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Lobby_Records_Flr_1 Thermostat, !- Name Lobby_Records_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lobby_Records_Flr_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Corridor_Flr_1 Thermostat, !- Name Corridor_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Flr_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, ER_NurseStn_Lobby_Flr_1 Thermostat, !- Name ER_NurseStn_Lobby_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_NurseStn_Lobby_Flr_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, OR1_Flr_2 Thermostat, !- Name OR1_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR1_Flr_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, OR2_Mult5_Flr_2 Thermostat, !- Name OR2_Mult5_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR2_Mult5_Flr_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, OR3_Flr_2 Thermostat, !- Name OR3_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR3_Flr_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, OR4_Flr_2 Thermostat, !- Name OR4_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR4_Flr_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, IC_PatRoom1_Mult5_Flr_2 Thermostat, !- Name IC_PatRoom1_Mult5_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type IC_PatRoom1_Mult5_Flr_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, IC_PatRoom2_Flr_2 Thermostat, !- Name IC_PatRoom2_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type IC_PatRoom2_Flr_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, IC_PatRoom3_Mult6_Flr_2 Thermostat, !- Name IC_PatRoom3_Mult6_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type IC_PatRoom3_Mult6_Flr_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, ICU_Flr_2 Thermostat, !- Name ICU_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ICU_Flr_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, ICU_NurseStn_Lobby_Flr_2 Thermostat, !- Name ICU_NurseStn_Lobby_Flr_2,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ICU_NurseStn_Lobby_Flr_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Corridor_Flr_2 Thermostat, !- Name Corridor_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Flr_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, OR_NurseStn_Lobby_Flr_2 Thermostat, !- Name OR_NurseStn_Lobby_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR_NurseStn_Lobby_Flr_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, PatRoom1_Mult10_Flr_3 Thermostat, !- Name PatRoom1_Mult10_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom1_Mult10_Flr_3 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, PatRoom2_Flr_3 Thermostat, !- Name PatRoom2_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom2_Flr_3 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, PatRoom3_Mult10_Flr_3 Thermostat, !- Name PatRoom3_Mult10_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom3_Mult10_Flr_3 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, PatRoom4_Flr_3 Thermostat, !- Name PatRoom4_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom4_Flr_3 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, PatRoom5_Mult10_Flr_3 Thermostat, !- Name PatRoom5_Mult10_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom5_Mult10_Flr_3 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, PhysTherapy_Flr_3 Thermostat, !- Name PhysTherapy_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PhysTherapy_Flr_3 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, PatRoom6_Flr_3 Thermostat, !- Name PatRoom6_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom6_Flr_3 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, PatRoom7_Mult10_Flr_3 Thermostat, !- Name PatRoom7_Mult10_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom7_Mult10_Flr_3 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, PatRoom8_Flr_3 Thermostat, !- Name PatRoom8_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom8_Flr_3 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, NurseStn_Lobby_Flr_3 Thermostat, !- Name NurseStn_Lobby_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type NurseStn_Lobby_Flr_3 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Lab_Flr_3 Thermostat, !- Name Lab_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lab_Flr_3 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Corridor_SE_Flr_3 Thermostat, !- Name Corridor_SE_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_SE_Flr_3 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Corridor_NW_Flr_3 Thermostat, !- Name Corridor_NW_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_NW_Flr_3 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, PatRoom1_Mult10_Flr_4 Thermostat, !- Name PatRoom1_Mult10_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom1_Mult10_Flr_4 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, PatRoom2_Flr_4 Thermostat, !- Name PatRoom2_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom2_Flr_4 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, PatRoom3_Mult10_Flr_4 Thermostat, !- Name PatRoom3_Mult10_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom3_Mult10_Flr_4 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, PatRoom4_Flr_4 Thermostat, !- Name PatRoom4_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom4_Flr_4 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, PatRoom5_Mult10_Flr_4 Thermostat, !- Name PatRoom5_Mult10_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom5_Mult10_Flr_4 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Radiology_Flr_4 Thermostat, !- Name Radiology_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Radiology_Flr_4 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, PatRoom6_Flr_4 Thermostat, !- Name PatRoom6_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom6_Flr_4 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, PatRoom7_Mult10_Flr_4 Thermostat, !- Name PatRoom7_Mult10_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom7_Mult10_Flr_4 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, PatRoom8_Flr_4 Thermostat, !- Name PatRoom8_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom8_Flr_4 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, NurseStn_Lobby_Flr_4 Thermostat, !- Name NurseStn_Lobby_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type NurseStn_Lobby_Flr_4 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Lab_Flr_4 Thermostat, !- Name Lab_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lab_Flr_4 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Corridor_SE_Flr_4 Thermostat, !- Name Corridor_SE_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_SE_Flr_4 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Corridor_NW_Flr_4 Thermostat, !- Name Corridor_NW_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_NW_Flr_4 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Dining_Flr_5 Thermostat, !- Name Dining_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dining_Flr_5 DualSPSched;!- Control 1 Name ZoneControl:Thermostat, NurseStn_Lobby_Flr_5 Thermostat, !- Name NurseStn_Lobby_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type NurseStn_Lobby_Flr_5 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Kitchen_Flr_5 Thermostat,!- Name Kitchen_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Kitchen_Flr_5 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Office1_Flr_5 Thermostat,!- Name Office1_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office1_Flr_5 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Office2_Mult5_Flr_5 Thermostat, !- Name Office2_Mult5_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office2_Mult5_Flr_5 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Office3_Flr_5 Thermostat,!- Name Office3_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office3_Flr_5 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Office4_Mult6_Flr_5 Thermostat, !- Name Office4_Mult6_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office4_Mult6_Flr_5 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Corridor_Flr_5 Thermostat, !- Name Corridor_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Flr_5 DualSPSched; !- Control 1 Name !- =========== ALL OBJECTS IN CLASS: DUAL SETPOINT WITH DEADBAND =========== ThermostatSetpoint:DualSetpoint, Basement DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, ER_Exam1_Mult4_Flr_1 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, ER_Trauma1_Flr_1 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, ER_Exam3_Mult4_Flr_1 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, ER_Trauma2_Flr_1 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, ER_Triage_Mult4_Flr_1 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Office1_Mult4_Flr_1 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Lobby_Records_Flr_1 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Corridor_Flr_1 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, ER_NurseStn_Lobby_Flr_1 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, OR1_Flr_2 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, OR2_Mult5_Flr_2 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, OR3_Flr_2 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, OR4_Flr_2 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, IC_PatRoom1_Mult5_Flr_2 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, IC_PatRoom2_Flr_2 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, IC_PatRoom3_Mult6_Flr_2 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, ICU_Flr_2 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, ICU_NurseStn_Lobby_Flr_2 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Corridor_Flr_2 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, OR_NurseStn_Lobby_Flr_2 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, PatRoom1_Mult10_Flr_3 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, PatRoom2_Flr_3 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, PatRoom3_Mult10_Flr_3 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, PatRoom4_Flr_3 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, PatRoom5_Mult10_Flr_3 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, PhysTherapy_Flr_3 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, PatRoom6_Flr_3 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, PatRoom7_Mult10_Flr_3 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, PatRoom8_Flr_3 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, NurseStn_Lobby_Flr_3 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Lab_Flr_3 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Corridor_SE_Flr_3 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Corridor_NW_Flr_3 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, PatRoom1_Mult10_Flr_4 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, PatRoom2_Flr_4 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, PatRoom3_Mult10_Flr_4 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, PatRoom4_Flr_4 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, PatRoom5_Mult10_Flr_4 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Radiology_Flr_4 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, PatRoom6_Flr_4 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, PatRoom7_Mult10_Flr_4 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, PatRoom8_Flr_4 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, NurseStn_Lobby_Flr_4 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Lab_Flr_4 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Corridor_SE_Flr_4 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Corridor_NW_Flr_4 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Dining_Flr_5 DualSPSched,!- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, NurseStn_Lobby_Flr_5 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Kitchen_Flr_5 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Office1_Flr_5 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Office2_Mult5_Flr_5 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Office3_Flr_5 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Office4_Mult6_Flr_5 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Corridor_Flr_5 DualSPSched, !- Name HtgSetP_Sch, !- Heating Setpoint Temperature Schedule Name ClgSetP_Sch; !- Cooling Setpoint Temperature Schedule Name !- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:SUPPLYPATH =========== AirLoopHVAC:SupplyPath, VAV_1, !- Name VAV_1 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type VAV_1 Supply Air Splitter; !- Component 1 Name AirLoopHVAC:SupplyPath, VAV_ER, !- Name VAV_ER Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type VAV_ER Supply Air Splitter; !- Component 1 Name AirLoopHVAC:SupplyPath, VAV_OR, !- Name VAV_OR Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type VAV_OR Supply Air Splitter; !- Component 1 Name AirLoopHVAC:SupplyPath, VAV_ICU, !- Name VAV_ICU Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type VAV_ICU Supply Air Splitter; !- Component 1 Name AirLoopHVAC:SupplyPath, VAV_PATRMS, !- Name VAV_PATRMS Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type VAV_PATRMS Supply Air Splitter; !- Component 1 Name AirLoopHVAC:SupplyPath, VAV_2, !- Name VAV_2 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type VAV_2 Supply Air Splitter; !- Component 1 Name AirLoopHVAC:SupplyPath, VAV_LABS, !- Name VAV_LABS Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type VAV_LABS Supply Air Splitter; !- Component 1 Name AirLoopHVAC:SupplyPath, CAV_KITCHEN, !- Name CAV_KITCHEN Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type CAV_KITCHEN Supply Air Splitter; !- Component 1 Name !- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:RETURNPATH =========== AirLoopHVAC:ReturnPath, VAV_1 Return Air Path, !- Name VAV_1 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type VAV_1 Return Air Mixer; !- Component 1 Name AirLoopHVAC:ReturnPath, VAV_ER Return Air Path, !- Name VAV_ER Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type VAV_ER Return Air Mixer; !- Component 1 Name AirLoopHVAC:ReturnPath, VAV_OR Return Air Path, !- Name VAV_OR Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type VAV_OR Return Air Mixer; !- Component 1 Name AirLoopHVAC:ReturnPath, VAV_ICU Return Air Path, !- Name VAV_ICU Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type VAV_ICU Return Air Mixer;!- Component 1 Name AirLoopHVAC:ReturnPath, VAV_PATRMS Return Air Path, !- Name VAV_PATRMS Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type VAV_PATRMS Return Air Mixer; !- Component 1 Name AirLoopHVAC:ReturnPath, VAV_2 Return Air Path, !- Name VAV_2 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type VAV_2 Return Air Mixer; !- Component 1 Name AirLoopHVAC:ReturnPath, VAV_LABS Return Air Path,!- Name VAV_LABS Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type VAV_LABS Return Air Mixer; !- Component 1 Name AirLoopHVAC:ReturnPath, CAV_KITCHEN Return Air Path, !- Name CAV_KITCHEN Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type CAV_KITCHEN Return Air Mixer; !- Component 1 Name !- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:ZONESPLITTER =========== AirLoopHVAC:ZoneSplitter, VAV_1 Supply Air Splitter, !- Name VAV_1 Zone Equipment Inlet Node, !- Inlet Node Name Basement VAV Box Inlet Node, !- Outlet 1 Node Name Office1_Mult4_Flr_1 VAV Box Inlet Node, !- Outlet 2 Node Name Lobby_Records_Flr_1 VAV Box Inlet Node, !- Outlet 3 Node Name Corridor_Flr_1 VAV Box Inlet Node, !- Outlet 4 Node Name ER_NurseStn_Lobby_Flr_1 VAV Box Inlet Node, !- Outlet 5 Node Name ICU_NurseStn_Lobby_Flr_2 VAV Box Inlet Node, !- Outlet 6 Node Name Corridor_Flr_2 VAV Box Inlet Node, !- Outlet 7 Node Name OR_NurseStn_Lobby_Flr_2 VAV Box Inlet Node; !- Outlet 8 Node Name AirLoopHVAC:ZoneSplitter, VAV_ER Supply Air Splitter, !- Name VAV_ER Zone Equipment Inlet Node, !- Inlet Node Name ER_Exam1_Mult4_Flr_1 VAV Box Inlet Node, !- Outlet 1 Node Name ER_Trauma1_Flr_1 VAV Box Inlet Node, !- Outlet 2 Node Name ER_Exam3_Mult4_Flr_1 VAV Box Inlet Node, !- Outlet 3 Node Name ER_Trauma2_Flr_1 VAV Box Inlet Node, !- Outlet 4 Node Name ER_Triage_Mult4_Flr_1 VAV Box Inlet Node; !- Outlet 5 Node Name AirLoopHVAC:ZoneSplitter, VAV_OR Supply Air Splitter, !- Name VAV_OR Zone Equipment Inlet Node, !- Inlet Node Name OR1_Flr_2 VAV Box Inlet Node, !- Outlet 1 Node Name OR2_Mult5_Flr_2 VAV Box Inlet Node, !- Outlet 2 Node Name OR3_Flr_2 VAV Box Inlet Node, !- Outlet 3 Node Name OR4_Flr_2 VAV Box Inlet Node; !- Outlet 4 Node Name AirLoopHVAC:ZoneSplitter, VAV_ICU Supply Air Splitter, !- Name VAV_ICU Zone Equipment Inlet Node, !- Inlet Node Name IC_PatRoom1_Mult5_Flr_2 VAV Box Inlet Node, !- Outlet 1 Node Name IC_PatRoom2_Flr_2 VAV Box Inlet Node, !- Outlet 2 Node Name IC_PatRoom3_Mult6_Flr_2 VAV Box Inlet Node, !- Outlet 3 Node Name ICU_Flr_2 VAV Box Inlet Node; !- Outlet 4 Node Name AirLoopHVAC:ZoneSplitter, VAV_PATRMS Supply Air Splitter, !- Name VAV_PATRMS Zone Equipment Inlet Node, !- Inlet Node Name PatRoom1_Mult10_Flr_3 VAV Box Inlet Node, !- Outlet 1 Node Name PatRoom2_Flr_3 VAV Box Inlet Node, !- Outlet 2 Node Name PatRoom3_Mult10_Flr_3 VAV Box Inlet Node, !- Outlet 3 Node Name PatRoom4_Flr_3 VAV Box Inlet Node, !- Outlet 4 Node Name PatRoom5_Mult10_Flr_3 VAV Box Inlet Node, !- Outlet 5 Node Name PatRoom6_Flr_3 VAV Box Inlet Node, !- Outlet 6 Node Name PatRoom7_Mult10_Flr_3 VAV Box Inlet Node, !- Outlet 7 Node Name PatRoom8_Flr_3 VAV Box Inlet Node, !- Outlet 8 Node Name PatRoom1_Mult10_Flr_4 VAV Box Inlet Node, !- Outlet 9 Node Name PatRoom2_Flr_4 VAV Box Inlet Node, !- Outlet 10 Node Name PatRoom3_Mult10_Flr_4 VAV Box Inlet Node, !- Outlet 11 Node Name PatRoom4_Flr_4 VAV Box Inlet Node, !- Outlet 12 Node Name PatRoom5_Mult10_Flr_4 VAV Box Inlet Node, !- Outlet 13 Node Name PatRoom6_Flr_4 VAV Box Inlet Node, !- Outlet 14 Node Name PatRoom7_Mult10_Flr_4 VAV Box Inlet Node, !- Outlet 15 Node Name PatRoom8_Flr_4 VAV Box Inlet Node; !- Outlet 16 Node Name AirLoopHVAC:ZoneSplitter, VAV_2 Supply Air Splitter, !- Name VAV_2 Zone Equipment Inlet Node, !- Inlet Node Name PhysTherapy_Flr_3 VAV Box Inlet Node, !- Outlet 1 Node Name NurseStn_Lobby_Flr_3 VAV Box Inlet Node, !- Outlet 2 Node Name Corridor_SE_Flr_3 VAV Box Inlet Node, !- Outlet 3 Node Name Corridor_NW_Flr_3 VAV Box Inlet Node, !- Outlet 4 Node Name Radiology_Flr_4 VAV Box Inlet Node, !- Outlet 5 Node Name NurseStn_Lobby_Flr_4 VAV Box Inlet Node, !- Outlet 6 Node Name Corridor_SE_Flr_4 VAV Box Inlet Node, !- Outlet 7 Node Name Corridor_NW_Flr_4 VAV Box Inlet Node, !- Outlet 8 Node Name Dining_Flr_5 VAV Box Inlet Node, !- Outlet 9 Node Name NurseStn_Lobby_Flr_5 VAV Box Inlet Node, !- Outlet 10 Node Name Office1_Flr_5 VAV Box Inlet Node, !- Outlet 11 Node Name Office2_Mult5_Flr_5 VAV Box Inlet Node, !- Outlet 12 Node Name Office3_Flr_5 VAV Box Inlet Node, !- Outlet 13 Node Name Office4_Mult6_Flr_5 VAV Box Inlet Node, !- Outlet 14 Node Name Corridor_Flr_5 VAV Box Inlet Node; !- Outlet 15 Node Name AirLoopHVAC:ZoneSplitter, VAV_LABS Supply Air Splitter, !- Name VAV_LABS Zone Equipment Inlet Node, !- Inlet Node Name Lab_Flr_3 VAV Box Inlet Node, !- Outlet 1 Node Name Lab_Flr_4 VAV Box Inlet Node; !- Outlet 2 Node Name AirLoopHVAC:ZoneSplitter, CAV_KITCHEN Supply Air Splitter, !- Name CAV_KITCHEN Zone Equipment Inlet Node, !- Inlet Node Name Kitchen_Flr_5 Inlet Nodes; !- Outlet 1 Node Name !- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:ZONEMIXER =========== AirLoopHVAC:ZoneMixer, VAV_1 Return Air Mixer, !- Name VAV_1 Zone Equipment Outlet Node, !- Outlet Node Name Basement Return Air Node,!- Inlet 1 Node Name Office1_Mult4_Flr_1 Return Air Node, !- Inlet 2 Node Name Lobby_Records_Flr_1 Return Air Node, !- Inlet 3 Node Name Corridor_Flr_1 Return Air Node, !- Inlet 4 Node Name ER_NurseStn_Lobby_Flr_1 Return Air Node, !- Inlet 5 Node Name ICU_NurseStn_Lobby_Flr_2 Return Air Node, !- Inlet 6 Node Name Corridor_Flr_2 Return Air Node, !- Inlet 7 Node Name OR_NurseStn_Lobby_Flr_2 Return Air Node; !- Inlet 8 Node Name AirLoopHVAC:ZoneMixer, VAV_ER Return Air Mixer, !- Name VAV_ER Zone Equipment Outlet Node, !- Outlet Node Name ER_Exam1_Mult4_Flr_1 Return Air Node, !- Inlet 1 Node Name ER_Trauma1_Flr_1 Return Air Node, !- Inlet 2 Node Name ER_Exam3_Mult4_Flr_1 Return Air Node, !- Inlet 3 Node Name ER_Trauma2_Flr_1 Return Air Node, !- Inlet 4 Node Name ER_Triage_Mult4_Flr_1 Return Air Node; !- Inlet 5 Node Name AirLoopHVAC:ZoneMixer, VAV_OR Return Air Mixer, !- Name VAV_OR Zone Equipment Outlet Node, !- Outlet Node Name OR1_Flr_2 Return Air Node, !- Inlet 1 Node Name OR2_Mult5_Flr_2 Return Air Node, !- Inlet 2 Node Name OR3_Flr_2 Return Air Node, !- Inlet 3 Node Name OR4_Flr_2 Return Air Node; !- Inlet 4 Node Name AirLoopHVAC:ZoneMixer, VAV_ICU Return Air Mixer,!- Name VAV_ICU Zone Equipment Outlet Node, !- Outlet Node Name IC_PatRoom1_Mult5_Flr_2 Return Air Node, !- Inlet 1 Node Name IC_PatRoom2_Flr_2 Return Air Node, !- Inlet 2 Node Name IC_PatRoom3_Mult6_Flr_2 Return Air Node, !- Inlet 3 Node Name ICU_Flr_2 Return Air Node; !- Inlet 4 Node Name AirLoopHVAC:ZoneMixer, VAV_PATRMS Return Air Mixer, !- Name VAV_PATRMS Zone Equipment Outlet Node, !- Outlet Node Name PatRoom1_Mult10_Flr_3 Return Air Node, !- Inlet 1 Node Name PatRoom2_Flr_3 Return Air Node, !- Inlet 2 Node Name PatRoom3_Mult10_Flr_3 Return Air Node, !- Inlet 3 Node Name PatRoom4_Flr_3 Return Air Node, !- Inlet 4 Node Name PatRoom5_Mult10_Flr_3 Return Air Node, !- Inlet 5 Node Name PatRoom6_Flr_3 Return Air Node, !- Inlet 6 Node Name PatRoom7_Mult10_Flr_3 Return Air Node, !- Inlet 7 Node Name PatRoom8_Flr_3 Return Air Node, !- Inlet 8 Node Name PatRoom1_Mult10_Flr_4 Return Air Node, !- Inlet 9 Node Name PatRoom2_Flr_4 Return Air Node, !- Inlet 10 Node Name PatRoom3_Mult10_Flr_4 Return Air Node, !- Inlet 11 Node Name PatRoom4_Flr_4 Return Air Node, !- Inlet 12 Node Name PatRoom5_Mult10_Flr_4 Return Air Node, !- Inlet 13 Node Name PatRoom6_Flr_4 Return Air Node, !- Inlet 14 Node Name PatRoom7_Mult10_Flr_4 Return Air Node, !- Inlet 15 Node Name PatRoom8_Flr_4 Return Air Node; !- Inlet 16 Node Name AirLoopHVAC:ZoneMixer, VAV_2 Return Air Mixer, !- Name VAV_2 Zone Equipment Outlet Node, !- Outlet Node Name PhysTherapy_Flr_3 Return Air Node, !- Inlet 1 Node Name NurseStn_Lobby_Flr_3 Return Air Node, !- Inlet 2 Node Name Corridor_SE_Flr_3 Return Air Node, !- Inlet 3 Node Name Corridor_NW_Flr_3 Return Air Node, !- Inlet 4 Node Name Radiology_Flr_4 Return Air Node, !- Inlet 5 Node Name NurseStn_Lobby_Flr_4 Return Air Node, !- Inlet 6 Node Name Corridor_SE_Flr_4 Return Air Node, !- Inlet 7 Node Name Corridor_NW_Flr_4 Return Air Node, !- Inlet 8 Node Name Dining_Flr_5 Return Air Node, !- Inlet 9 Node Name NurseStn_Lobby_Flr_5 Return Air Node, !- Inlet 10 Node Name Office1_Flr_5 Return Air Node, !- Inlet 11 Node Name Office2_Mult5_Flr_5 Return Air Node, !- Inlet 12 Node Name Office3_Flr_5 Return Air Node, !- Inlet 13 Node Name Office4_Mult6_Flr_5 Return Air Node, !- Inlet 14 Node Name Corridor_Flr_5 Return Air Node; !- Inlet 15 Node Name AirLoopHVAC:ZoneMixer, VAV_LABS Return Air Mixer, !- Name VAV_LABS Zone Equipment Outlet Node, !- Outlet Node Name Lab_Flr_3 Return Air Node, !- Inlet 1 Node Name Lab_Flr_4 Return Air Node; !- Inlet 2 Node Name AirLoopHVAC:ZoneMixer, CAV_KITCHEN Return Air Mixer, !- Name CAV_KITCHEN Zone Equipment Outlet Node, !- Outlet Node Name Kitchen_Flr_5 Return Air Node; !- Inlet 1 Node Name !- =========== ALL OBJECTS IN CLASS: BOILER:SIMPLE =========== Boiler:HotWater, HeatSys1 Boiler, !- Name NATURALGAS, !- Fuel Type 1470129.16, !- Nominal Capacity {W} 0.8125, !- Nominal Thermal Efficiency LeavingBoiler, !- Efficiency Curve Temperature Evaluation Variable HeatSys1 Boiler Efficiency Curve, !- Normalized Boiler Efficiency Curve Name AUTOSIZE, !- Design Water Flow Rate {m3/s} 0.0, !- Minimum Part Load Ratio 1.2, !- Maximum Part Load Ratio 1.0, !- Optimum Part Load Ratio HeatSys1 Pump-HeatSys1 BoilerNode, !- Boiler Water Inlet Node Name HeatSys1 Supply Equipment Outlet Node, !- Boiler Water Outlet Node Name 95.0, !- Water Outlet Upper Temperature Limit {C} LeavingSetpointModulated;!- Boiler Flow Mode SetpointManager:Scheduled, HeatSys1 Boiler Setpoint Manager, !- Name Temperature, !- Control Variable HW-Loop-Temp-Schedule, !- Schedule Name HeatSys1 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name Curve:Quadratic, HeatSys1 Boiler Efficiency Curve, !- Name 1.0, !- Coefficient1 Constant 0.0, !- Coefficient2 x 0.0, !- Coefficient3 x**2 0, !- Minimum Value of x 1; !- Maximum Value of x !- =========== ALL OBJECTS IN CLASS: CHILLER:ELECTRIC:EIR =========== Chiller:Electric:EIR, Heat Recovery Chiller, !- Name 129842.5275, !- Reference Capacity {W} 4.47, !- Reference COP {W/W} 6.67, !- Reference Leaving Chilled Water Temperature {C} 23.88, !- Reference Entering Condenser Fluid Temperature {C} 0.00569211009519065, !- Reference Chilled Water Flow Rate {m3/s} autosize, !- Reference Condenser Fluid Flow Rate {m3/s} Lp2LpChlr_CAP_FT, !- Cooling Capacity Function of Temperature Curve Name Lp2LpChlr_EIR_FT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name Lp2LpChlr_PLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name 0.1, !- Minimum Part Load Ratio 1, !- Maximum Part Load Ratio 1, !- Optimum Part Load Ratio 0.2, !- Minimum Unloading Ratio Heat Recovery Chiller Inlet, !- Chilled Water Inlet Node Name Heat Recovery Chiller Outlet, !- Chilled Water Outlet Node Name Heat Recovery Chiller Condenser Inlet, !- Condenser Inlet Node Name Heat Recovery Chiller Condenser Outlet, !- Condenser Outlet Node Name WaterCooled, !- Condenser Type , !- Condenser Fan Power Ratio {W/W} 1, !- Fraction of Compressor Electric Consumption Rejected by Condenser 2, !- Leaving Chilled Water Lower Temperature Limit {C} NotModulated, !- Chiller Flow Mode autosize, !- Design Heat Recovery Water Flow Rate {m3/s} Heat Recovery Chiller HR Inlet Node, !- Heat Recovery Inlet Node Name Heat Recovery Chiller HR Outlet Node, !- Heat Recovery Outlet Node Name 1, !- Sizing Factor , !- Basin Heater Capacity {W/K} 2, !- Basin Heater Setpoint Temperature {C} , !- Basin Heater Operating Schedule Name , !- Condenser Heat Recovery Relative Capacity Fraction , !- Heat Recovery Inlet High Temperature Limit Schedule Name Heat Recovery Chiller HR Outlet Node, !- Heat Recovery Leaving Temperature Setpoint Node Name General; !- End-Use Subcategory Curve:Quadratic, Lp2LpChlr_PLR, !- Name 0.02297712, !- Coefficient1 Constant 0.90150452, !- Coefficient2 x 0.07551826, !- Coefficient3 x**2 0, !- Minimum Value of x 1, !- Maximum Value of x , !- Minimum Curve Output , !- Maximum Curve Output Dimensionless, !- Input Unit Type for X Dimensionless; !- Output Unit Type Curve:Biquadratic, Lp2LpChlr_CAP_FT, !- Name 0.91244573, !- Coefficient1 Constant 0.033950641, !- Coefficient2 x 0.000258828, !- Coefficient3 x**2 -.002545924, !- Coefficient4 y -.0000833545, !- Coefficient5 y**2 -.000263086, !- Coefficient6 x*y 0, !- Minimum Value of x 999, !- Maximum Value of x 0, !- Minimum Value of y 999, !- Maximum Value of y , !- Minimum Curve Output , !- Maximum Curve Output Dimensionless, !- Input Unit Type for X Dimensionless, !- Input Unit Type for Y Dimensionless; !- Output Unit Type Curve:Biquadratic, Lp2LpChlr_EIR_FT, !- Name 0.685706383, !- Coefficient1 Constant -.010880034, !- Coefficient2 x 0.000383057, !- Coefficient3 x**2 0.00988623, !- Coefficient4 y 0.000357473, !- Coefficient5 y**2 -.000441863, !- Coefficient6 x*y 0, !- Minimum Value of x 999, !- Maximum Value of x 0, !- Minimum Value of y 999, !- Maximum Value of y , !- Minimum Curve Output , !- Maximum Curve Output Dimensionless, !- Input Unit Type for X Dimensionless, !- Input Unit Type for Y Dimensionless; !- Output Unit Type !- =========== ALL OBJECTS IN CLASS: Chiller:Electric:ReformulatedEIR =========== Chiller:Electric:ReformulatedEIR, CoolSys1 Chiller1, !- Name 927446.625, !- Reference Capacity {W} 5.33, !- Reference COP {W/W} 6.6700, !- Reference Leaving Chilled Water Temperature {C} 34.4444, !- Reference Leaving Condenser Water Temperature {C} 0.0270079, !- Reference Chilled Water Flow Rate {m3/s} AutoSize, !- Reference Condenser Water Flow Rate {m3/s} WC_PD_GT150_2010_PA_CAPFT, !- Cooling Capacity Function of Temperature Curve Name WC_PD_GT150_2010_PA_EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name LeavingCondenserWaterTemperature, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Type WC_PD_150to300_2010_PA_EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name 0.1000, !- Minimum Part Load Ratio 1.0000, !- Maximum Part Load Ratio 1.0000, !- Optimum Part Load Ratio 0.1000, !- Minimum Unloading Ratio CoolSys1 Pump-CoolSys1 Chiller1Node, !- Chilled Water Inlet Node Name CoolSys1 Supply Equipment Outlet Node 1, !- Chilled Water Outlet Node Name CoolSys1 Chiller1 Water Inlet Node, !- Condenser Inlet Node Name CoolSys1 Chiller1 Water Outlet Node, !- Condenser Outlet Node Name , !- Fraction of Compressor Electric Consumption Rejected by Condenser 5.0000, !- Leaving Chilled Water Lower Temperature Limit {C} ConstantFlow, !- Chiller Flow Mode Type 0.0000; !- Design Heat Recovery Water Flow Rate {m3/s} Chiller:Electric:ReformulatedEIR, CoolSys1 Chiller2, !- Name 927446.625, !- Reference Capacity {W} 5.33, !- Reference COP {W/W} 6.6700, !- Reference Leaving Chilled Water Temperature {C} 34.4444, !- Reference Leaving Condenser Water Temperature {C} 0.0270079, !- Reference Chilled Water Flow Rate {m3/s} AutoSize, !- Reference Condenser Water Flow Rate {m3/s} WC_PD_GT150_2010_PA_CAPFT, !- Cooling Capacity Function of Temperature Curve Name WC_PD_GT150_2010_PA_EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name LeavingCondenserWaterTemperature, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Type WC_PD_150to300_2010_PA_EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name 0.1000, !- Minimum Part Load Ratio 1.0000, !- Maximum Part Load Ratio 1.0000, !- Optimum Part Load Ratio 0.1000, !- Minimum Unloading Ratio CoolSys1 Pump-CoolSys1 Chiller2Node, !- Chilled Water Inlet Node Name CoolSys1 Supply Equipment Outlet Node 2, !- Chilled Water Outlet Node Name CoolSys1 Chiller2 Water Inlet Node, !- Condenser Inlet Node Name CoolSys1 Chiller2 Water Outlet Node, !- Condenser Outlet Node Name , !- Fraction of Compressor Electric Consumption Rejected by Condenser 5.0000, !- Leaving Chilled Water Lower Temperature Limit {C} ConstantFlow, !- Chiller Flow Mode Type 0.0000; !- Design Heat Recovery Water Flow Rate {m3/s} !- =========== ALL OBJECTS IN CLASS: WATER HEATER:MIXED =========== WaterHeater:Mixed, SHWSys1 Water Heater, !- Name 2.271247, !- Tank Volume {m3} SHWSys1 Water Heater Setpoint Temperature Schedule, !- Setpoint Temperature Schedule Name 2.0, !- Deadband Temperature Difference {deltaC} 82.2222, !- Maximum Temperature Limit {C} Cycle, !- Heater Control Type 175842.64, !- Heater Maximum Capacity {W} , !- Heater Minimum Capacity {W} , !- Heater Ignition Minimum Flow Rate {m3/s} , !- Heater Ignition Delay {s} NATURALGAS, !- Heater Fuel Type 0.802764686, !- Heater Thermal Efficiency , !- Part Load Factor Curve Name 17147.66, !- Off Cycle Parasitic Fuel Consumption Rate {W} NATURALGAS, !- Off Cycle Parasitic Fuel Type 0.8, !- Off Cycle Parasitic Heat Fraction to Tank 17147.66, !- On Cycle Parasitic Fuel Consumption Rate {W} NATURALGAS, !- On Cycle Parasitic Fuel Type , !- On Cycle Parasitic Heat Fraction to Tank zone, !- Ambient Temperature Indicator , !- Ambient Temperature Schedule Name BASEMENT, !- Ambient Temperature Zone Name , !- Ambient Temperature Outdoor Air Node Name 15.60100708, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K} , !- Off Cycle Loss Fraction to Zone 15.60100708, !- On Cycle Loss Coefficient to Ambient Temperature {W/K} , !- On Cycle Loss Fraction to Zone , !- Peak Use Flow Rate {m3/s} , !- Use Flow Rate Fraction Schedule Name , !- Cold Water Supply Temperature Schedule Name SHWSys1 Pump-SHWSys1 Water HeaterNode, !- Use Side Inlet Node Name SHWSys1 Supply Equipment Outlet Node, !- Use Side Outlet Node Name 1.0, !- Use Side Effectiveness , !- Source Side Inlet Node Name , !- Source Side Outlet Node Name 1.0, !- Source Side Effectiveness AUTOSIZE, !- Use Side Design Flow Rate {m3/s} AUTOSIZE, !- Source Side Design Flow Rate {m3/s} 1.5; !- Indirect Water Heating Recovery Time {hr} WaterHeater:Mixed, SWH DishWashing Booster, !- Name 0.02271247, !- Tank Volume {m3} Dishwashing Booster Setpoint Temp Schedule, !- Setpoint Temperature Schedule Name 2.00000005298191, !- Deadband Temperature Difference {deltaC} 82.2222244003673, !- Maximum Temperature Limit {C} Cycle, !- Heater Control Type 3000, !- Heater Maximum Capacity {W} 0, !- Heater Minimum Capacity {W} , !- Heater Ignition Minimum Flow Rate {m3/s} , !- Heater Ignition Delay {s} Electricity, !- Heater Fuel Type 1, !- Heater Thermal Efficiency , !- Part Load Factor Curve Name , !- Off Cycle Parasitic Fuel Consumption Rate {W} Electricity, !- Off Cycle Parasitic Fuel Type 0, !- Off Cycle Parasitic Heat Fraction to Tank , !- On Cycle Parasitic Fuel Consumption Rate {W} , !- On Cycle Parasitic Fuel Type , !- On Cycle Parasitic Heat Fraction to Tank Zone, !- Ambient Temperature Indicator , !- Ambient Temperature Schedule Name KITCHEN_FLR_5, !- Ambient Temperature Zone Name , !- Ambient Temperature Outdoor Air Node Name 1.053159296, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K} , !- Off Cycle Loss Fraction to Zone 1.053159296, !- On Cycle Loss Coefficient to Ambient Temperature {W/K} , !- On Cycle Loss Fraction to Zone 3.659231E-5, !- Peak Use Flow Rate {m3/s} BLDG_SWH_SCH, !- Use Flow Rate Fraction Schedule Name Dishwashing Booster Water Inlet Temp Schedule; !- Cold Water Supply Temperature Schedule Name WaterHeater:Mixed, SWH Laundry, !- Name 1.1356235, !- Tank Volume {m3} Laundry Setpoint Temp Schedule, !- Setpoint Temperature Schedule Name 2.00000005298191, !- Deadband Temperature Difference {deltaC} 82.2222244003673, !- Maximum Temperature Limit {C} Cycle, !- Heater Control Type 87921.32, !- Heater Maximum Capacity {W} 0, !- Heater Minimum Capacity {W} , !- Heater Ignition Minimum Flow Rate {m3/s} , !- Heater Ignition Delay {s} NaturalGas, !- Heater Fuel Type 0.803988738, !- Heater Thermal Efficiency , !- Part Load Factor Curve Name , !- Off Cycle Parasitic Fuel Consumption Rate {W} NaturalGas, !- Off Cycle Parasitic Fuel Type 0, !- Off Cycle Parasitic Heat Fraction to Tank , !- On Cycle Parasitic Fuel Consumption Rate {W} , !- On Cycle Parasitic Fuel Type , !- On Cycle Parasitic Heat Fraction to Tank Zone, !- Ambient Temperature Indicator , !- Ambient Temperature Schedule Name BASEMENT, !- Ambient Temperature Zone Name , !- Ambient Temperature Outdoor Air Node Name 11.25413987, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K} , !- Off Cycle Loss Fraction to Zone 11.25413987, !- On Cycle Loss Coefficient to Ambient Temperature {W/K} , !- On Cycle Loss Fraction to Zone 1.766525E-4, !- Peak Use Flow Rate {m3/s} LAUNDRY_SWH_SCH, !- Use Flow Rate Fraction Schedule Name ; !- Cold Water Supply Temperature Schedule Name WaterHeater:Mixed, Dummy Water Heater, !- Name 0.0189271, !- Tank Volume {m3} Dummy Water Heater Setpoint, !- Setpoint Temperature Schedule Name 0, !- Deadband Temperature Difference {deltaC} 50, !- Maximum Temperature Limit {C} CYCLE, !- Heater Control Type 0, !- Heater Maximum Capacity {W} , !- Heater Minimum Capacity {W} , !- Heater Ignition Minimum Flow Rate {m3/s} , !- Heater Ignition Delay {s} Electricity, !- Heater Fuel Type 1, !- Heater Thermal Efficiency , !- Part Load Factor Curve Name , !- Off Cycle Parasitic Fuel Consumption Rate {W} , !- Off Cycle Parasitic Fuel Type , !- Off Cycle Parasitic Heat Fraction to Tank , !- On Cycle Parasitic Fuel Consumption Rate {W} , !- On Cycle Parasitic Fuel Type , !- On Cycle Parasitic Heat Fraction to Tank Outdoors, !- Ambient Temperature Indicator , !- Ambient Temperature Schedule Name , !- Ambient Temperature Zone Name Dummy Water Heater OA Node, !- Ambient Temperature Outdoor Air Node Name 0, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K} 0, !- Off Cycle Loss Fraction to Zone 0, !- On Cycle Loss Coefficient to Ambient Temperature {W/K} 0, !- On Cycle Loss Fraction to Zone , !- Peak Use Flow Rate {m3/s} , !- Use Flow Rate Fraction Schedule Name , !- Cold Water Supply Temperature Schedule Name HeatSys1 Pump-HeatSys1 BoilerNodeviaConnector, !- Use Side Inlet Node Name Dummy Water Heater Use Side Outlet Node, !- Use Side Outlet Node Name 1.0, !- Use Side Effectiveness Dummy Water Heater Source Side Inlet Node, !- Source Side Inlet Node Name Dummy Water Heater Source Side Outlet Node, !- Source Side Outlet Node Name 1.0, !- Source Side Effectiveness autosize, !- Use Side Design Flow Rate {m3/s} autosize; !- Source Side Design Flow Rate {m3/s} !- =========== ALL OBJECTS IN CLASS: COOLING TOWER:TWO SPEED =========== !- Design Outdoor Air Wet-Bulb Temperature from the EPW file !- Design Range Temperature is set to 10 deltaF per 90.1-2010 G3.1.3.13 !- Design Approach Temperature. Per 90.1-2010 G3.1.3.13, condenser water design supply temperature shall be !- 85F or 10F approaching design wet-bulb temperature, whichever is lower, with a design temperature rise of 10F (range temperature). !- Therefore, we use Design Approach Temperature to set condenser water design supply temperature, i.e. Design Approach Temperature = min(10F, (85 - Design OA WbT from EPW)) CoolingTower:VariableSpeed, TowerWaterSys CoolTower 1, !- Name TowerWaterSys Pump-TowerWaterSys CoolTower1Node, !- Water Inlet Node Name TowerWaterSys Supply Equipment Outlet Node 1, !- Water Outlet Node Name CoolToolsCrossFlow, !- Model Type , !- Model Coefficient Name 24.9, !- Design Inlet Air Wet-Bulb Temperature {C} 4.54444444444444, !- Design Approach Temperature {deltaC} 5.55555555555556, !- Design Range Temperature {deltaC} 0.03686516, !- Design Water Flow Rate {m3/s} autosize, !- Design Air Flow Rate {m3/s} 13113.1748080111, !- Design Fan Power {W} Tower_Fan_Curve, !- Fan Power Ratio Function of Air Flow Rate Ratio Curve Name 0.2, !- Minimum Air Flow Rate Ratio 0.125, !- Fraction of Tower Capacity in Free Convection Regime , !- Basin Heater Capacity {W/K} , !- Basin Heater Setpoint Temperature {C} , !- Basin Heater Operating Schedule Name , !- Evaporation Loss Mode , !- Evaporation Loss Factor {percent/K} , !- Drift Loss Percent {percent} , !- Blowdown Calculation Mode , !- Blowdown Concentration Ratio , !- Blowdown Makeup Water Usage Schedule Name , !- Supply Water Storage Tank Name , !- Outdoor Air Inlet Node Name 4, !- Number of Cells MaximalCell, !- Cell Control !- Cell Control , !- Cell Minimum Water Flow Rate Fraction , !- Cell Maximum Water Flow Rate Fraction 1.000; !- Sizing Factor CoolingTower:VariableSpeed, TowerWaterSys CoolTower 2, !- Name TowerWaterSys Pump-TowerWaterSys CoolTower2Node, !- Water Inlet Node Name TowerWaterSys Supply Equipment Outlet Node 2, !- Water Outlet Node Name CoolToolsCrossFlow, !- Model Type , !- Model Coefficient Name 24.9, !- Design Inlet Air Wet-Bulb Temperature {C} 4.54444444444444, !- Design Approach Temperature {deltaC} 5.55555555555556, !- Design Range Temperature {deltaC} 0.03686516, !- Design Water Flow Rate {m3/s} autosize, !- Design Air Flow Rate {m3/s} 13113.1748080111, !- Design Fan Power {W} Tower_Fan_Curve, !- Fan Power Ratio Function of Air Flow Rate Ratio Curve Name 0.2, !- Minimum Air Flow Rate Ratio 0.125, !- Fraction of Tower Capacity in Free Convection Regime , !- Basin Heater Capacity {W/K} , !- Basin Heater Setpoint Temperature {C} , !- Basin Heater Operating Schedule Name , !- Evaporation Loss Mode , !- Evaporation Loss Factor {percent/K} , !- Drift Loss Percent {percent} , !- Blowdown Calculation Mode , !- Blowdown Concentration Ratio , !- Blowdown Makeup Water Usage Schedule Name , !- Supply Water Storage Tank Name , !- Outdoor Air Inlet Node Name 4, !- Number of Cells MaximalCell, !- Cell Control , !- Cell Minimum Water Flow Rate Fraction , !- Cell Maximum Water Flow Rate Fraction 1.000; !- Sizing Factor !- =========== ALL OBJECTS IN CLASS: PUMP:VARIABLE SPEED =========== Pump:ConstantSpeed, SHWSys1 Pump, !- Name SHWSys1 Supply Inlet Node, !- Inlet Node Name SHWSys1 Pump-SHWSys1 Water HeaterNodeviaConnector, !- Outlet Node Name autosize, !- Design Flow Rate {m3/s} 29891, !- Design Pump Head {Pa} AUTOSIZE, !- Design Power Consumption {W} 0.30, !- Motor Efficiency 0.0, !- Fraction of Motor Inefficiencies to Fluid Stream Intermittent; !- Pump Control Type Pump:VariableSpeed, HeatSys1 Pump, !- Name HeatSys1 Supply Inlet Node, !- Inlet Node Name HeatSys1 Pump-HeatSys1 BoilerNodeviaConnector, !- Outlet Node Name AUTOSIZE, !- Design Maximum Flow Rate {m3/s} 179352, !- Design Pump Head {Pa} AUTOSIZE, !- Design Power Consumption {W} 0.909, !- Motor Efficiency 0.0, !- Fraction of Motor Inefficiencies to Fluid Stream 0,0.0205, 0.4101,0.5753, !- VariableSpeed Pump Curve Coefficients 0, !- Minimum Flow Rate {m3/s} Intermittent; Pump:ConstantSpeed, CoolSys1 Chiller1 Pump, !- Name CoolSys1 Chiller1 Pump Inlet Node, !- Inlet Node Name CoolSys1 Pump-CoolSys1 Chiller1Node, !- Outlet Node Name AUTOSIZE, !- Design Flow Rate {m3/s} 44761.27683, !- Design Pump Head {Pa} AUTOSIZE, !- Design Power Consumption {W} 0.909, !- Motor Efficiency 0.0, !- Fraction of Motor Inefficiencies to Fluid Stream Intermittent, !- Pump Control Type ; !- Pump Flow Rate Schedule Name Pump:ConstantSpeed, CoolSys1 Chiller2 Pump, !- Name CoolSys1 Chiller2 Pump Inlet Node, !- Inlet Node Name CoolSys1 Pump-CoolSys1 Chiller2Node, !- Outlet Node Name AUTOSIZE, !- Design Flow Rate {m3/s} 44761.27683, !- Design Pump Head {Pa} AUTOSIZE, !- Design Power Consumption {W} 0.909, !- Motor Efficiency 0.0, !- Fraction of Motor Inefficiencies to Fluid Stream Intermittent, !- Pump Control Type ; !- Pump Flow Rate Schedule Name Pump:VariableSpeed, CoolSys1 Pump Secondary, !- Name CoolSys1 Demand Inlet Node, !- Inlet Node Name CoolSys1 Pump Secondary-CoolSys1 Demand Mixer, !- Outlet Node Name autosize, !- Design Maximum Flow Rate {m3/s} 134283.8305, !- Design Pump Head {Pa} autosize, !- Design Power Consumption {W} 0.909, !- Motor Efficiency 0, !- Fraction of Motor Inefficiencies to Fluid Stream 0,0.0205, 0.4101,0.5753, !- VariableSpeed Pump Curve Coefficients 0, !- Minimum Flow Rate {m3/s} Intermittent; Pump:VariableSpeed, Heat Recovery Circ Pump, !- Name Heat Recovery Supply Inlet Node, !- Inlet Node Name Heat Recovery Pump Outlet Node, !- Outlet Node Name autosize, !- Design Maximum Flow Rate {m3/s} 0, !- Design Pump Head {Pa} 0, !- Design Power Consumption {W} 1, !- Motor Efficiency 0.0, !- Fraction of Motor Inefficiencies to Fluid Stream 0, !- Coefficient 1 of the Part Load Performance Curve 1, !- Coefficient 2 of the Part Load Performance Curve 0, !- Coefficient 3 of the Part Load Performance Curve 0, !- Coefficient 4 of the Part Load Performance Curve 0, !- Design Minimum Flow Rate {m3/s} INTERMITTENT; !- Pump Control Type Pump:VariableSpeed, Heat Recovery Chiller Bypass Loop Pump, !- Name Heat Recovery Chiller Bypass Loop Pump Inlet, !- Inlet Node Name Heat Recovery Chiller Bypass Loop Pump Outlet, !- Outlet Node Name autosize, !- Design Maximum Flow Rate {m3/s} 44761.27683, !- Design Pump Head {Pa} autosize, !- Design Power Consumption {W} 0.909, !- Motor Efficiency 0, !- Fraction of Motor Inefficiencies to Fluid Stream 0,0.0205, 0.4101,0.5753, !- VariableSpeed Pump Curve Coefficients 0, !- Design Minimum Flow Rate {m3/s} Intermittent; !- Pump Control Type !- =========== ALL OBJECTS IN CLASS: PUMP:CONSTANT SPEED =========== HeaderedPumps:VariableSpeed, TowerWaterSys Pump, !- Name TowerWaterSys Supply Inlet Node, !- Inlet Node Name TowerWaterSys Pump-TowerWaterSys CoolTowerNodeviaConnector, !- Outlet Node Name AUTOSIZE, !- Total Design Flow Rate {m3/s} 4, !- Number of Pumps in Bank SEQUENTIAL, !- Flow Sequencing Control Scheme 148556.6249, !- Design Pump Head {Pa} autosize, !- Design Power Consumption {W} 0.909, !- Motor Efficiency 0.0, !- Fraction of Motor Inefficiencies to Fluid Stream 0, !- Coefficient 1 of the Part Load Performance Curve 0.0216, !- Coefficient 2 of the Part Load Performance Curve -0.0325, !- Coefficient 3 of the Part Load Performance Curve 1.0095, !- Coefficient 4 of the Part Load Performance Curve 0, !- Minimum Flow Rate Fraction Intermittent, !- Pump Control Type ; !- Pump Flow Rate Schedule Name !- =========== ALL OBJECTS IN CLASS: COIL:COOLING:WATER =========== Coil:Cooling:Water, VAV_1_CoolC, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- Design Water Flow Rate {m3/s} AUTOSIZE, !- Design Air Flow Rate {m3/s} 8.89, !- Design Inlet Water Temperature {C} AUTOSIZE, !- Design Inlet Air Temperature {C} AUTOSIZE, !- Design Outlet Air Temperature {C} AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir} AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir} VAV_1_CoolCDemand Inlet Node, !- Water Inlet Node Name VAV_1_CoolCDemand Outlet Node, !- Water Outlet Node Name VAV_1_OA-VAV_1_CoolCNode,!- Air Inlet Node Name VAV_1_CoolC-VAV_1_HeatCNode, !- Air Outlet Node Name SimpleAnalysis, !- Type of Analysis CrossFlow; !- Heat Exchanger Configuration Coil:Cooling:Water, VAV_ER_CoolC, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- Design Water Flow Rate {m3/s} AUTOSIZE, !- Design Air Flow Rate {m3/s} 8.89, !- Design Inlet Water Temperature {C} AUTOSIZE, !- Design Inlet Air Temperature {C} AUTOSIZE, !- Design Outlet Air Temperature {C} AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir} AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir} VAV_ER_CoolCDemand Inlet Node, !- Water Inlet Node Name VAV_ER_CoolCDemand Outlet Node, !- Water Outlet Node Name VAV_ER ExtraWaterHeatC-VAV_ER_CoolCNode, !- Air Inlet Node Name VAV_ER_CoolC-VAV_ER_HeatCNode, !- Air Outlet Node Name SimpleAnalysis, !- Type of Analysis CrossFlow; !- Heat Exchanger Configuration Coil:Cooling:Water, VAV_OR_CoolC, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- Design Water Flow Rate {m3/s} AUTOSIZE, !- Design Air Flow Rate {m3/s} 8.89, !- Design Inlet Water Temperature {C} AUTOSIZE, !- Design Inlet Air Temperature {C} AUTOSIZE, !- Design Outlet Air Temperature {C} AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir} AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir} VAV_OR_CoolCDemand Inlet Node, !- Water Inlet Node Name VAV_OR_CoolCDemand Outlet Node, !- Water Outlet Node Name VAV_OR ExtraWaterHeatC-VAV_OR_CoolCNode, !- Air Inlet Node Name VAV_OR_CoolC-VAV_OR_HeatCNode, !- Air Outlet Node Name SimpleAnalysis, !- Type of Analysis CrossFlow; !- Heat Exchanger Configuration Coil:Cooling:Water, VAV_ICU_CoolC, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- Design Water Flow Rate {m3/s} AUTOSIZE, !- Design Air Flow Rate {m3/s} 8.89, !- Design Inlet Water Temperature {C} AUTOSIZE, !- Design Inlet Air Temperature {C} AUTOSIZE, !- Design Outlet Air Temperature {C} AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir} AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir} VAV_ICU_CoolCDemand Inlet Node, !- Water Inlet Node Name VAV_ICU_CoolCDemand Outlet Node, !- Water Outlet Node Name VAV_ICU ExtraWaterHeatC-VAV_ICU_CoolCNode, !- Air Inlet Node Name VAV_ICU_CoolC-VAV_ICU_HeatCNode, !- Air Outlet Node Name SimpleAnalysis, !- Type of Analysis CrossFlow; !- Heat Exchanger Configuration Coil:Cooling:Water, VAV_PATRMS_CoolC, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- Design Water Flow Rate {m3/s} AUTOSIZE, !- Design Air Flow Rate {m3/s} 8.89, !- Design Inlet Water Temperature {C} AUTOSIZE, !- Design Inlet Air Temperature {C} AUTOSIZE, !- Design Outlet Air Temperature {C} AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir} AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir} VAV_PATRMS_CoolCDemand Inlet Node, !- Water Inlet Node Name VAV_PATRMS_CoolCDemand Outlet Node, !- Water Outlet Node Name VAV_PATRMS ExtraWaterHeatC-VAV_PATRMS_CoolCNode, !- Air Inlet Node Name VAV_PATRMS_CoolC-VAV_PATRMS_HeatCNode, !- Air Outlet Node Name SimpleAnalysis, !- Type of Analysis CrossFlow; !- Heat Exchanger Configuration Coil:Cooling:Water, VAV_2_CoolC, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- Design Water Flow Rate {m3/s} AUTOSIZE, !- Design Air Flow Rate {m3/s} 8.89, !- Design Inlet Water Temperature {C} AUTOSIZE, !- Design Inlet Air Temperature {C} AUTOSIZE, !- Design Outlet Air Temperature {C} AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir} AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir} VAV_2_CoolCDemand Inlet Node, !- Water Inlet Node Name VAV_2_CoolCDemand Outlet Node, !- Water Outlet Node Name VAV_2_OA-VAV_2_CoolCNode,!- Air Inlet Node Name VAV_2_CoolC-VAV_2_HeatCNode, !- Air Outlet Node Name SimpleAnalysis, !- Type of Analysis CrossFlow; !- Heat Exchanger Configuration Coil:Cooling:Water, VAV_LABS_CoolC, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- Design Water Flow Rate {m3/s} AUTOSIZE, !- Design Air Flow Rate {m3/s} 8.89, !- Design Inlet Water Temperature {C} AUTOSIZE, !- Design Inlet Air Temperature {C} AUTOSIZE, !- Design Outlet Air Temperature {C} AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir} AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir} VAV_LABS_CoolCDemand Inlet Node, !- Water Inlet Node Name VAV_LABS_CoolCDemand Outlet Node, !- Water Outlet Node Name VAV_LABS ExtraWaterHeatC-VAV_LABS_CoolCNode, !- Air Inlet Node Name VAV_LABS_CoolC-VAV_LABS_HeatCNode, !- Air Outlet Node Name SimpleAnalysis, !- Type of Analysis CrossFlow; !- Heat Exchanger Configuration Coil:Cooling:Water, CAV_KITCHEN_CoolC, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- Design Water Flow Rate {m3/s} AUTOSIZE, !- Design Air Flow Rate {m3/s} 8.89, !- Design Inlet Water Temperature {C} AUTOSIZE, !- Design Inlet Air Temperature {C} AUTOSIZE, !- Design Outlet Air Temperature {C} AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir} AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir} CAV_KITCHEN_CoolCDemand Inlet Node, !- Water Inlet Node Name CAV_KITCHEN_CoolCDemand Outlet Node, !- Water Outlet Node Name CAV_KITCHEN_OA-CAV_KITCHEN_CoolCNode, !- Air Inlet Node Name CAV_KITCHEN_CoolC-CAV_KITCHEN_HeatCNode, !- Air Outlet Node Name SimpleAnalysis, !- Type of Analysis CrossFlow; !- Heat Exchanger Configuration !- =========== ALL OBJECTS IN CLASS: COIL:HEATING:WATER =========== Coil:Heating:Water, VAV_PATRMS_ExtraWaterHeatC, !- Name Patrms_ExtraWaterHeatC_Sch, !- Availability Schedule Name , !- U-Factor Times Area Value {W/K} , !- Maximum Water Flow Rate {m3/s} VAV_PATRMS_ExtraWaterHeatCDemand Inlet Node, !- Water Inlet Node Name VAV_PATRMS_ExtraWaterHeatCDemand Outlet Node, !- Water Outlet Node Name VAV_PATRMS ExtraElecHeatC-VAV_PATRMS_ExtraWaterHeatCNode, !- Air Inlet Node Name VAV_PATRMS ExtraWaterHeatC-VAV_PATRMS_CoolCNode, !- Air Outlet Node Name NominalCapacity, !- Performance Input Method autosize, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 16.6, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 32.2, !- Rated Outlet Air Temperature {C} 0.5; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, VAV_ER_ExtraWaterHeatC, !- Name ER_ExtraWaterHeatC_Sch, !- Availability Schedule Name , !- U-Factor Times Area Value {W/K} , !- Maximum Water Flow Rate {m3/s} VAV_ER_ExtraWaterHeatCDemand Inlet Node, !- Water Inlet Node Name VAV_ER_ExtraWaterHeatCDemand Outlet Node, !- Water Outlet Node Name VAV_ER ExtraElecHeatC-VAV_ER_ExtraWaterHeatCNode, !- Air Inlet Node Name VAV_ER ExtraWaterHeatC-VAV_ER_CoolCNode, !- Air Outlet Node Name NominalCapacity, !- Performance Input Method autosize, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 16.6, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 32.2, !- Rated Outlet Air Temperature {C} 0.5; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, VAV_OR_ExtraWaterHeatC, !- Name OR_ExtraWaterHeatC_Sch, !- Availability Schedule Name , !- U-Factor Times Area Value {W/K} , !- Maximum Water Flow Rate {m3/s} VAV_OR_ExtraWaterHeatCDemand Inlet Node, !- Water Inlet Node Name VAV_OR_ExtraWaterHeatCDemand Outlet Node, !- Water Outlet Node Name VAV_OR ExtraElecHeatC-VAV_OR_ExtraWaterHeatCNode, !- Air Inlet Node Name VAV_OR ExtraWaterHeatC-VAV_OR_CoolCNode, !- Air Outlet Node Name NominalCapacity, !- Performance Input Method autosize, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 16.6, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 32.2, !- Rated Outlet Air Temperature {C} 0.5; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, VAV_ICU_ExtraWaterHeatC, !- Name ICU_ExtraWaterHeatC_Sch, !- Availability Schedule Name , !- U-Factor Times Area Value {W/K} , !- Maximum Water Flow Rate {m3/s} VAV_ICU_ExtraWaterHeatCDemand Inlet Node, !- Water Inlet Node Name VAV_ICU_ExtraWaterHeatCDemand Outlet Node, !- Water Outlet Node Name VAV_ICU ExtraElecHeatC-VAV_ICU_ExtraWaterHeatCNode, !- Air Inlet Node Name VAV_ICU ExtraWaterHeatC-VAV_ICU_CoolCNode, !- Air Outlet Node Name NominalCapacity, !- Performance Input Method autosize, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 16.6, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 32.2, !- Rated Outlet Air Temperature {C} 0.5; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, VAV_LABS_ExtraWaterHeatC,!- Name LABS_ExtraWaterHeatC_Sch,!- Availability Schedule Name , !- U-Factor Times Area Value {W/K} , !- Maximum Water Flow Rate {m3/s} VAV_LABS_ExtraWaterHeatCDemand Inlet Node, !- Water Inlet Node Name VAV_LABS_ExtraWaterHeatCDemand Outlet Node, !- Water Outlet Node Name VAV_LABS ExtraElecHeatC-VAV_LABS_ExtraWaterHeatCNode, !- Air Inlet Node Name VAV_LABS ExtraWaterHeatC-VAV_LABS_CoolCNode, !- Air Outlet Node Name NominalCapacity, !- Performance Input Method autosize, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 16.6, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 32.2, !- Rated Outlet Air Temperature {C} 0.5; !- Rated Ratio for Air and Water Convection !- =========== ALL OBJECTS IN CLASS: COIL:HEATING:ELECTRIC =========== Coil:Heating:Electric, VAV_PATRMS_ExtraElecHeatC, !- Name Patrms_ExtraElecHeatC_Sch, !- Availability Schedule Name 1.0000, !- Efficiency 10000000, !- Nominal Capacity {W} VAV_PATRMS Humidifier-VAV_PATRMS_ExtraElecHeatCNode, !- Air Inlet Node Name VAV_PATRMS ExtraElecHeatC-VAV_PATRMS_ExtraWaterHeatCNode, !- Air Outlet Node Name VAV_PATRMS ExtraElecHeatC-VAV_PATRMS_ExtraWaterHeatCNode; !- Temperature Setpoint Node Name Coil:Heating:Electric, VAV_ER_ExtraElecHeatC, !- Name ER_ExtraElecHeatC_Sch, !- Availability Schedule Name 1.0000, !- Efficiency 10000000, !- Nominal Capacity {W} VAV_ER Humidifier-VAV_ER_ExtraElecHeatCNode, !- Air Inlet Node Name VAV_ER ExtraElecHeatC-VAV_ER_ExtraWaterHeatCNode, !- Air Outlet Node Name VAV_ER ExtraElecHeatC-VAV_ER_ExtraWaterHeatCNode; !- Temperature Setpoint Node Name Coil:Heating:Electric, VAV_OR_ExtraElecHeatC, !- Name OR_ExtraElecHeatC_Sch, !- Availability Schedule Name 1.0000, !- Efficiency 10000000, !- Nominal Capacity {W} VAV_OR Humidifier-VAV_OR_ExtraElecHeatCNode, !- Air Inlet Node Name VAV_OR ExtraElecHeatC-VAV_OR_ExtraWaterHeatCNode, !- Air Outlet Node Name VAV_OR ExtraElecHeatC-VAV_OR_ExtraWaterHeatCNode; !- Temperature Setpoint Node Name Coil:Heating:Electric, VAV_ICU_ExtraElecHeatC, !- Name ICU_ExtraElecHeatC_Sch, !- Availability Schedule Name 1.0000, !- Efficiency 10000000, !- Nominal Capacity {W} VAV_ICU Humidifier-VAV_ICU_ExtraElecHeatCNode, !- Air Inlet Node Name VAV_ICU ExtraElecHeatC-VAV_ICU_ExtraWaterHeatCNode, !- Air Outlet Node Name VAV_ICU ExtraElecHeatC-VAV_ICU_ExtraWaterHeatCNode; !- Temperature Setpoint Node Name Coil:Heating:Electric, VAV_LABS_ExtraElecHeatC, !- Name LABS_ExtraElecHeatC_Sch, !- Availability Schedule Name 1.0000, !- Efficiency 10000000, !- Nominal Capacity {W} VAV_LABS Humidifier-VAV_LABS_ExtraElecHeatCNode, !- Air Inlet Node Name VAV_LABS ExtraElecHeatC-VAV_LABS_ExtraWaterHeatCNode, !- Air Outlet Node Name VAV_LABS ExtraElecHeatC-VAV_LABS_ExtraWaterHeatCNode; !- Temperature Setpoint Node Name Coil:Heating:Water, Basement VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Basement VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Basement VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Basement VAV Box Damper Node, !- Air Inlet Node Name Basement VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, ER_Exam1_Mult4_Flr_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} ER_Exam1_Mult4_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name ER_Exam1_Mult4_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name ER_Exam1_Mult4_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name ER_Exam1_Mult4_Flr_1 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, ER_Trauma1_Flr_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} ER_Trauma1_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name ER_Trauma1_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name ER_Trauma1_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name ER_Trauma1_Flr_1 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, ER_Exam3_Mult4_Flr_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} ER_Exam3_Mult4_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name ER_Exam3_Mult4_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name ER_Exam3_Mult4_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name ER_Exam3_Mult4_Flr_1 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, ER_Trauma2_Flr_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} ER_Trauma2_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name ER_Trauma2_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name ER_Trauma2_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name ER_Trauma2_Flr_1 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, ER_Triage_Mult4_Flr_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} ER_Triage_Mult4_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name ER_Triage_Mult4_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name ER_Triage_Mult4_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name ER_Triage_Mult4_Flr_1 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Office1_Mult4_Flr_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Office1_Mult4_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Office1_Mult4_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Office1_Mult4_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name Office1_Mult4_Flr_1 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Lobby_Records_Flr_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Lobby_Records_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Lobby_Records_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Lobby_Records_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name Lobby_Records_Flr_1 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Corridor_Flr_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corridor_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corridor_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corridor_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name Corridor_Flr_1 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, ER_NurseStn_Lobby_Flr_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} ER_NurseStn_Lobby_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name ER_NurseStn_Lobby_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name ER_NurseStn_Lobby_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name ER_NurseStn_Lobby_Flr_1 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, OR1_Flr_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} OR1_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name OR1_Flr_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name OR1_Flr_2 VAV Box Damper Node, !- Air Inlet Node Name OR1_Flr_2 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, OR2_Mult5_Flr_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} OR2_Mult5_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name OR2_Mult5_Flr_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name OR2_Mult5_Flr_2 VAV Box Damper Node, !- Air Inlet Node Name OR2_Mult5_Flr_2 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, OR3_Flr_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} OR3_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name OR3_Flr_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name OR3_Flr_2 VAV Box Damper Node, !- Air Inlet Node Name OR3_Flr_2 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, OR4_Flr_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} OR4_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name OR4_Flr_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name OR4_Flr_2 VAV Box Damper Node, !- Air Inlet Node Name OR4_Flr_2 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, IC_PatRoom1_Mult5_Flr_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} IC_PatRoom1_Mult5_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name IC_PatRoom1_Mult5_Flr_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name IC_PatRoom1_Mult5_Flr_2 VAV Box Damper Node, !- Air Inlet Node Name IC_PatRoom1_Mult5_Flr_2 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, IC_PatRoom2_Flr_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} IC_PatRoom2_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name IC_PatRoom2_Flr_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name IC_PatRoom2_Flr_2 VAV Box Damper Node, !- Air Inlet Node Name IC_PatRoom2_Flr_2 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, IC_PatRoom3_Mult6_Flr_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} IC_PatRoom3_Mult6_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name IC_PatRoom3_Mult6_Flr_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name IC_PatRoom3_Mult6_Flr_2 VAV Box Damper Node, !- Air Inlet Node Name IC_PatRoom3_Mult6_Flr_2 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, ICU_Flr_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} ICU_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name ICU_Flr_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name ICU_Flr_2 VAV Box Damper Node, !- Air Inlet Node Name ICU_Flr_2 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, ICU_NurseStn_Lobby_Flr_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} ICU_NurseStn_Lobby_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name ICU_NurseStn_Lobby_Flr_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name ICU_NurseStn_Lobby_Flr_2 VAV Box Damper Node, !- Air Inlet Node Name ICU_NurseStn_Lobby_Flr_2 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Corridor_Flr_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corridor_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corridor_Flr_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corridor_Flr_2 VAV Box Damper Node, !- Air Inlet Node Name Corridor_Flr_2 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, OR_NurseStn_Lobby_Flr_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} OR_NurseStn_Lobby_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name OR_NurseStn_Lobby_Flr_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name OR_NurseStn_Lobby_Flr_2 VAV Box Damper Node, !- Air Inlet Node Name OR_NurseStn_Lobby_Flr_2 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, PatRoom1_Mult10_Flr_3 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} PatRoom1_Mult10_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name PatRoom1_Mult10_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name PatRoom1_Mult10_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name PatRoom1_Mult10_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, PatRoom2_Flr_3 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} PatRoom2_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name PatRoom2_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name PatRoom2_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name PatRoom2_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, PatRoom3_Mult10_Flr_3 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} PatRoom3_Mult10_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name PatRoom3_Mult10_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name PatRoom3_Mult10_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name PatRoom3_Mult10_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, PatRoom4_Flr_3 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} PatRoom4_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name PatRoom4_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name PatRoom4_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name PatRoom4_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, PatRoom5_Mult10_Flr_3 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} PatRoom5_Mult10_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name PatRoom5_Mult10_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name PatRoom5_Mult10_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name PatRoom5_Mult10_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, PhysTherapy_Flr_3 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} PhysTherapy_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name PhysTherapy_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name PhysTherapy_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name PhysTherapy_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, PatRoom6_Flr_3 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} PatRoom6_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name PatRoom6_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name PatRoom6_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name PatRoom6_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, PatRoom7_Mult10_Flr_3 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} PatRoom7_Mult10_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name PatRoom7_Mult10_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name PatRoom7_Mult10_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name PatRoom7_Mult10_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, PatRoom8_Flr_3 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} PatRoom8_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name PatRoom8_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name PatRoom8_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name PatRoom8_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, NurseStn_Lobby_Flr_3 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} NurseStn_Lobby_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name NurseStn_Lobby_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name NurseStn_Lobby_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name NurseStn_Lobby_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Lab_Flr_3 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Lab_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Lab_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Lab_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name Lab_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Corridor_SE_Flr_3 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corridor_SE_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corridor_SE_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corridor_SE_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name Corridor_SE_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Corridor_NW_Flr_3 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corridor_NW_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corridor_NW_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corridor_NW_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name Corridor_NW_Flr_3 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, PatRoom1_Mult10_Flr_4 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} PatRoom1_Mult10_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name PatRoom1_Mult10_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name PatRoom1_Mult10_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name PatRoom1_Mult10_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, PatRoom2_Flr_4 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} PatRoom2_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name PatRoom2_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name PatRoom2_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name PatRoom2_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, PatRoom3_Mult10_Flr_4 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} PatRoom3_Mult10_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name PatRoom3_Mult10_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name PatRoom3_Mult10_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name PatRoom3_Mult10_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, PatRoom4_Flr_4 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} PatRoom4_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name PatRoom4_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name PatRoom4_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name PatRoom4_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, PatRoom5_Mult10_Flr_4 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} PatRoom5_Mult10_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name PatRoom5_Mult10_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name PatRoom5_Mult10_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name PatRoom5_Mult10_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Radiology_Flr_4 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Radiology_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Radiology_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Radiology_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name Radiology_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, PatRoom6_Flr_4 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} PatRoom6_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name PatRoom6_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name PatRoom6_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name PatRoom6_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, PatRoom7_Mult10_Flr_4 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} PatRoom7_Mult10_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name PatRoom7_Mult10_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name PatRoom7_Mult10_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name PatRoom7_Mult10_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, PatRoom8_Flr_4 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} PatRoom8_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name PatRoom8_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name PatRoom8_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name PatRoom8_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, NurseStn_Lobby_Flr_4 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} NurseStn_Lobby_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name NurseStn_Lobby_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name NurseStn_Lobby_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name NurseStn_Lobby_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Lab_Flr_4 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Lab_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Lab_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Lab_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name Lab_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Corridor_SE_Flr_4 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corridor_SE_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corridor_SE_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corridor_SE_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name Corridor_SE_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Corridor_NW_Flr_4 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corridor_NW_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corridor_NW_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corridor_NW_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name Corridor_NW_Flr_4 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Dining_Flr_5 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Dining_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Dining_Flr_5 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Dining_Flr_5 VAV Box Damper Node, !- Air Inlet Node Name Dining_Flr_5 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, NurseStn_Lobby_Flr_5 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} NurseStn_Lobby_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name NurseStn_Lobby_Flr_5 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name NurseStn_Lobby_Flr_5 VAV Box Damper Node, !- Air Inlet Node Name NurseStn_Lobby_Flr_5 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Office1_Flr_5 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Office1_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Office1_Flr_5 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Office1_Flr_5 VAV Box Damper Node, !- Air Inlet Node Name Office1_Flr_5 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Office2_Mult5_Flr_5 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Office2_Mult5_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Office2_Mult5_Flr_5 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Office2_Mult5_Flr_5 VAV Box Damper Node, !- Air Inlet Node Name Office2_Mult5_Flr_5 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Office3_Flr_5 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Office3_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Office3_Flr_5 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Office3_Flr_5 VAV Box Damper Node, !- Air Inlet Node Name Office3_Flr_5 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Office4_Mult6_Flr_5 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Office4_Mult6_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Office4_Mult6_Flr_5 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Office4_Mult6_Flr_5 VAV Box Damper Node, !- Air Inlet Node Name Office4_Mult6_Flr_5 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Corridor_Flr_5 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corridor_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corridor_Flr_5 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corridor_Flr_5 VAV Box Damper Node, !- Air Inlet Node Name Corridor_Flr_5 VAV Box Outlet Node, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, VAV_1_HeatC, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} VAV_1_HeatCDemand Inlet Node, !- Water Inlet Node Name VAV_1_HeatCDemand Outlet Node, !- Water Outlet Node Name VAV_1_CoolC-VAV_1_HeatCNode, !- Air Inlet Node Name VAV_1_HeatC-VAV_1_FanNode, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, VAV_ER_HeatC, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} VAV_ER_HeatCDemand Inlet Node, !- Water Inlet Node Name VAV_ER_HeatCDemand Outlet Node, !- Water Outlet Node Name VAV_ER_CoolC-VAV_ER_HeatCNode, !- Air Inlet Node Name VAV_ER_HeatC-VAV_ER_FanNode, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, VAV_OR_HeatC, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} VAV_OR_HeatCDemand Inlet Node, !- Water Inlet Node Name VAV_OR_HeatCDemand Outlet Node, !- Water Outlet Node Name VAV_OR_CoolC-VAV_OR_HeatCNode, !- Air Inlet Node Name VAV_OR_HeatC-VAV_OR_FanNode, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, VAV_ICU_HeatC, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} VAV_ICU_HeatCDemand Inlet Node, !- Water Inlet Node Name VAV_ICU_HeatCDemand Outlet Node, !- Water Outlet Node Name VAV_ICU_CoolC-VAV_ICU_HeatCNode, !- Air Inlet Node Name VAV_ICU_HeatC-VAV_ICU_FanNode, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, VAV_PATRMS_HeatC, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} VAV_PATRMS_HeatCDemand Inlet Node, !- Water Inlet Node Name VAV_PATRMS_HeatCDemand Outlet Node, !- Water Outlet Node Name VAV_PATRMS_CoolC-VAV_PATRMS_HeatCNode, !- Air Inlet Node Name VAV_PATRMS_HeatC-VAV_PATRMS_FanNode, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, VAV_2_HeatC, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} VAV_2_HeatCDemand Inlet Node, !- Water Inlet Node Name VAV_2_HeatCDemand Outlet Node, !- Water Outlet Node Name VAV_2_CoolC-VAV_2_HeatCNode, !- Air Inlet Node Name VAV_2_HeatC-VAV_2_FanNode, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, VAV_LABS_HeatC, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} VAV_LABS_HeatCDemand Inlet Node, !- Water Inlet Node Name VAV_LABS_HeatCDemand Outlet Node, !- Water Outlet Node Name VAV_LABS_CoolC-VAV_LABS_HeatCNode, !- Air Inlet Node Name VAV_LABS_HeatC-VAV_LABS_FanNode, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, CAV_KITCHEN_HeatC, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} CAV_KITCHEN_HeatCDemand Inlet Node, !- Water Inlet Node Name CAV_KITCHEN_HeatCDemand Outlet Node, !- Water Outlet Node Name CAV_KITCHEN_CoolC-CAV_KITCHEN_HeatCNode, !- Air Inlet Node Name CAV_KITCHEN_HeatC-CAV_KITCHEN_FanNode, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 48.89, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 35, !- Rated Outlet Water Temperature {C} 40, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection !- =========== ALL OBJECTS IN CLASS: HUMIDIFIER:STEAM:ELECTRIC =========== Humidifier:Steam:Electric, VAV_ER Humidifier, !- Name ALWAYS_ON, !- Availability Schedule Name 3.72E-5, !- Rated Capacity {m3/s} 100000, !- Rated Power {W} 0, !- Rated Fan Power {W} 0, !- Standby Power {W} VAV_ER_OA-VAV_ER HumidifierNode, !- Air Inlet Node Name VAV_ER Humidifier-VAV_ER_ExtraElecHeatCNode; !- Air Outlet Node Name Humidifier:Steam:Electric, VAV_OR Humidifier, !- Name ALWAYS_ON, !- Availability Schedule Name 3.72E-5, !- Rated Capacity {m3/s} 100000, !- Rated Power {W} 0, !- Rated Fan Power {W} 0, !- Standby Power {W} VAV_OR_OA-VAV_OR HumidifierNode, !- Air Inlet Node Name VAV_OR Humidifier-VAV_OR_ExtraElecHeatCNode; !- Air Outlet Node Name Humidifier:Steam:Electric, VAV_ICU Humidifier, !- Name ALWAYS_ON, !- Availability Schedule Name 3.72E-5, !- Rated Capacity {m3/s} 100000, !- Rated Power {W} 0, !- Rated Fan Power {W} 0, !- Standby Power {W} VAV_ICU_OA-VAV_ICU HumidifierNode, !- Air Inlet Node Name VAV_ICU Humidifier-VAV_ICU_ExtraElecHeatCNode; !- Air Outlet Node Name Humidifier:Steam:Electric, VAV_PATRMS Humidifier, !- Name ALWAYS_ON, !- Availability Schedule Name 3.72E-5, !- Rated Capacity {m3/s} 100000, !- Rated Power {W} 0, !- Rated Fan Power {W} 0, !- Standby Power {W} VAV_PATRMS_OA-VAV_PATRMS HumidifierNode, !- Air Inlet Node Name VAV_PATRMS Humidifier-VAV_PATRMS_ExtraElecHeatCNode; !- Air Outlet Node Name Humidifier:Steam:Electric, VAV_LABS Humidifier, !- Name ALWAYS_ON, !- Availability Schedule Name 3.72E-5, !- Rated Capacity {m3/s} 100000, !- Rated Power {W} 0, !- Rated Fan Power {W} 0, !- Standby Power {W} VAV_LABS_OA-VAV_LABS HumidifierNode, !- Air Inlet Node Name VAV_LABS Humidifier-VAV_LABS_ExtraElecHeatCNode; !- Air Outlet Node Name !- =========== ALL OBJECTS IN CLASS: FAN:SIMPLE:VARIABLEVOLUME =========== Fan:VariableVolume, VAV_1_Fan, !- Name HVACOperationSchd, !- Availability Schedule Name 0.61425, !- Fan Total Efficiency 1389.42, !- Pressure Rise {Pa} AUTOSIZE, !- Maximum Flow Rate {m3/s} Fraction, !- Fan Power Minimum Flow Rate Input Method 0.25, !- Fan Power Minimum Flow Fraction , !- Fan Power Minimum Air Flow Rate {m3/s} 0.945, !- Motor Efficiency 1.0, !- Motor In Airstream Fraction 0.0408, !- Fan Power Coefficient 1 0.088, !- Fan Power Coefficient 2 -0.0729, !- Fan Power Coefficient 3 0.9437, !- Fan Power Coefficient 4 0, !- Fan Power Coefficient 5 VAV_1_HeatC-VAV_1_FanNode, !- Air Inlet Node Name VAV_1 Supply Equipment Outlet Node, !- Air Outlet Node Name General; !- End-Use Subcategory Fan:VariableVolume, VAV_2_Fan, !- Name HVACOperationSchd, !- Availability Schedule Name 0.6175, !- Fan Total Efficiency 1389.42, !- Pressure Rise {Pa} AUTOSIZE, !- Maximum Flow Rate {m3/s} Fraction, !- Fan Power Minimum Flow Rate Input Method 0.25, !- Fan Power Minimum Flow Fraction , !- Fan Power Minimum Air Flow Rate {m3/s} 0.95, !- Motor Efficiency 1.0, !- Motor In Airstream Fraction 0.0408, !- Fan Power Coefficient 1 0.088, !- Fan Power Coefficient 2 -0.0729, !- Fan Power Coefficient 3 0.9437, !- Fan Power Coefficient 4 0, !- Fan Power Coefficient 5 VAV_2_HeatC-VAV_2_FanNode, !- Air Inlet Node Name VAV_2 Supply Equipment Outlet Node, !- Air Outlet Node Name General; !- End-Use Subcategory Fan:VariableVolume, VAV_ER_Fan, !- Name HVACOperationSchd, !- Availability Schedule Name 0.6045, !- Fan Total Efficiency 1314.72, !- Pressure Rise {Pa} AUTOSIZE, !- Maximum Flow Rate {m3/s} Fraction, !- Fan Power Minimum Flow Rate Input Method 0.25, !- Fan Power Minimum Flow Fraction , !- Fan Power Minimum Air Flow Rate {m3/s} 0.93, !- Motor Efficiency 1.0, !- Motor In Airstream Fraction 0.0408, !- Fan Power Coefficient 1 0.088, !- Fan Power Coefficient 2 -0.0729, !- Fan Power Coefficient 3 0.9437, !- Fan Power Coefficient 4 0, !- Fan Power Coefficient 5 VAV_ER_HeatC-VAV_ER_FanNode, !- Air Inlet Node Name VAV_ER Supply Equipment Outlet Node, !- Air Outlet Node Name General; !- End-Use Subcategory Fan:VariableVolume, VAV_OR_Fan, !- Name HVACOperationSchd, !- Availability Schedule Name 0.61165, !- Fan Total Efficiency 1389.42, !- Pressure Rise {Pa} AUTOSIZE, !- Maximum Flow Rate {m3/s} FixedFlowRate, !- Fan Power Minimum Flow Rate Input Method , !- Fan Power Minimum Flow Fraction 0, !- Fan Power Minimum Air Flow Rate {m3/s} 0.941, !- Motor Efficiency 1.0, !- Motor In Airstream Fraction 0.0408, !- Fan Power Coefficient 1 0.088, !- Fan Power Coefficient 2 -0.0729, !- Fan Power Coefficient 3 0.9437, !- Fan Power Coefficient 4 0, !- Fan Power Coefficient 5 VAV_OR_HeatC-VAV_OR_FanNode, !- Air Inlet Node Name VAV_OR Supply Equipment Outlet Node, !- Air Outlet Node Name General; !- End-Use Subcategory Fan:VariableVolume, VAV_ICU_Fan, !- Name HVACOperationSchd, !- Availability Schedule Name 0.6045, !- Fan Total Efficiency 1389.42, !- Pressure Rise {Pa} AUTOSIZE, !- Maximum Flow Rate {m3/s} Fraction, !- Fan Power Minimum Flow Rate Input Method 0.25, !- Fan Power Minimum Flow Fraction , !- Fan Power Minimum Air Flow Rate {m3/s} 0.93, !- Motor Efficiency 1.0, !- Motor In Airstream Fraction 0.0408, !- Fan Power Coefficient 1 0.088, !- Fan Power Coefficient 2 -0.0729, !- Fan Power Coefficient 3 0.9437, !- Fan Power Coefficient 4 0, !- Fan Power Coefficient 5 VAV_ICU_HeatC-VAV_ICU_FanNode, !- Air Inlet Node Name VAV_ICU Supply Equipment Outlet Node, !- Air Outlet Node Name General; !- End-Use Subcategory Fan:VariableVolume, VAV_PATRMS_Fan, !- Name HVACOperationSchd, !- Availability Schedule Name 0.61425, !- Fan Total Efficiency 1389.42, !- Pressure Rise {Pa} AUTOSIZE, !- Maximum Flow Rate {m3/s} FixedFlowRate, !- Fan Power Minimum Flow Rate Input Method , !- Fan Power Minimum Flow Fraction 0, !- Fan Power Minimum Air Flow Rate {m3/s} 0.945, !- Motor Efficiency 1.0, !- Motor In Airstream Fraction 0.0408, !- Fan Power Coefficient 1 0.088, !- Fan Power Coefficient 2 -0.0729, !- Fan Power Coefficient 3 0.9437, !- Fan Power Coefficient 4 0, !- Fan Power Coefficient 5 VAV_PATRMS_HeatC-VAV_PATRMS_FanNode, !- Air Inlet Node Name VAV_PATRMS Supply Equipment Outlet Node, !- Air Outlet Node Name General; !- End-Use Subcategory Fan:VariableVolume, VAV_LABS_Fan, !- Name HVACOperationSchd, !- Availability Schedule Name 0.59605, !- Fan Total Efficiency 1389.42, !- Pressure Rise {Pa} AUTOSIZE, !- Maximum Flow Rate {m3/s} Fraction, !- Fan Power Minimum Flow Rate Input Method 0.25, !- Fan Power Minimum Flow Fraction , !- Fan Power Minimum Air Flow Rate {m3/s} 0.917, !- Motor Efficiency 1.0, !- Motor In Airstream Fraction 0.18984763, !- Fan Power Coefficient 1 0.31447014, !- Fan Power Coefficient 2 0.49568211, !- Fan Power Coefficient 3 0, !- Fan Power Coefficient 4 0, !- Fan Power Coefficient 5 VAV_LABS_HeatC-VAV_LABS_FanNode, !- Air Inlet Node Name VAV_LABS Supply Equipment Outlet Node, !- Air Outlet Node Name General; !- End-Use Subcategory !- =========== ALL OBJECTS IN CLASS: FAN:CONSTANTVOLUME =========== Fan:ConstantVolume, CAV_KITCHEN_Fan, !- Name HVACOperationSchd, !- Availability Schedule Name 0.61425, !- Fan Total Efficiency 1018.41, !- Pressure Rise {Pa} AUTOSIZE, !- Maximum Flow Rate {m3/s} 0.945, !- Motor Efficiency 1.0, !- Motor In Airstream Fraction CAV_KITCHEN_HeatC-CAV_KITCHEN_FanNode, !- Air Inlet Node Name CAV_KITCHEN Supply Equipment Outlet Node, !- Air Outlet Node Name General; !- End-Use Subcategory !- =========== ALL OBJECTS IN CLASS: ZONE EXHAUST FAN =========== Fan:ZoneExhaust, Kitchen_Flr_5 Exhaust Fan, !- Name Kitchen_Exhaust_SCH, !- Availability Schedule Name 0.16, !- Fan Total Efficiency 124.5, !- Pressure Rise {Pa} 3.39802159631503, !- Maximum Flow Rate {m3/s} Kitchen_Flr_5 Exhaust Fan Node, !- Air Inlet Node Name Kitchen_Flr_5 Exhaust Fan Outlet Node, !- Air Outlet Node Name General, !- End-Use Subcategory , !- Flow Fraction Schedule Name , !- System Availability Manager Coupling Mode , !- Minimum Zone Temperature Limit Schedule Name Kitchen Exhaust Fan Balanced Exhaust Fraction Schedule; !- Balanced Exhaust Fraction Schedule Name Balanced Exhaust Fraction Schedule Name Schedule:Compact, Kitchen Exhaust Fan Balanced Exhaust Fraction Schedule, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 07:00,0, !- Field 3 Until: 24:00,0.445694444444444; !- Field 5 Fan:ZoneExhaust, Dining_Flr_5 Dummy Exhaust Fan, !- Name Kitchen_Exhaust_SCH, !- Availability Schedule Name 1.0000, !- Fan Total Efficiency 0, !- Pressure Rise {Pa} 0.902363512799215, !- Maximum Flow Rate {m3/s} Dining_Flr_5 Dummy Exhaust Fan Node, !- Air Inlet Node Name Dining_Flr_5 Dummy Exhaust Fan Outlet Node Name, !- Air Outlet Node Name General; !- End-Use Subcategory Fan:ZoneExhaust, NurseStn_Lobby_Flr_5 Dummy Exhaust Fan, !- Name Kitchen_Exhaust_SCH, !- Availability Schedule Name 1.0000, !- Fan Total Efficiency 0, !- Pressure Rise {Pa} 0.352072793173752, !- Maximum Flow Rate {m3/s} NurseStn_Lobby_Flr_5 Dummy Exhaust Fan Node, !- Air Inlet Node Name NurseStn_Lobby_Flr_5 Dummy Exhaust Fan Outlet Node Name, !- Air Outlet Node Name General; !- End-Use Subcategory Fan:ZoneExhaust, Office1_Flr_5 Dummy Exhaust Fan, !- Name Kitchen_Exhaust_SCH, !- Availability Schedule Name 1.0000, !- Fan Total Efficiency 0, !- Pressure Rise {Pa} 0.0335082685192177, !- Maximum Flow Rate {m3/s} Office1_Flr_5 Dummy Exhaust Fan Node, !- Air Inlet Node Name Office1_Flr_5 Dummy Exhaust Fan Outlet Node Name, !- Air Outlet Node Name General; !- End-Use Subcategory Fan:ZoneExhaust, Office2_Mult5_Flr_5 Dummy Exhaust Fan, !- Name Kitchen_Exhaust_SCH, !- Availability Schedule Name 1.0000, !- Fan Total Efficiency 0, !- Pressure Rise {Pa} 0.0335082685192177, !- Maximum Flow Rate {m3/s} Office2_Mult5_Flr_5 Dummy Exhaust Fan Node, !- Air Inlet Node Name Office2_Mult5_Flr_5 Dummy Exhaust Fan Outlet Node Name, !- Air Outlet Node Name General; !- End-Use Subcategory Fan:ZoneExhaust, Office3_Flr_5 Dummy Exhaust Fan, !- Name Kitchen_Exhaust_SCH, !- Availability Schedule Name 1.0000, !- Fan Total Efficiency 0, !- Pressure Rise {Pa} 0.0335082685192177, !- Maximum Flow Rate {m3/s} Office3_Flr_5 Dummy Exhaust Fan Node, !- Air Inlet Node Name Office3_Flr_5 Dummy Exhaust Fan Outlet Node Name, !- Air Outlet Node Name General; !- End-Use Subcategory Fan:ZoneExhaust, Office4_Mult6_Flr_5 Dummy Exhaust Fan, !- Name Kitchen_Exhaust_SCH, !- Availability Schedule Name 1.0000, !- Fan Total Efficiency 0, !- Pressure Rise {Pa} 0.00660726421505701, !- Maximum Flow Rate {m3/s} Office4_Mult6_Flr_5 Dummy Exhaust Fan Node, !- Air Inlet Node Name Office4_Mult6_Flr_5 Dummy Exhaust Fan Outlet Node Name, !- Air Outlet Node Name General; !- End-Use Subcategory Fan:ZoneExhaust, Corridor_Flr_5 Dummy Exhaust Fan, !- Name Kitchen_Exhaust_SCH, !- Availability Schedule Name 1.0000, !- Fan Total Efficiency 0, !- Pressure Rise {Pa} 0.152910971834177, !- Maximum Flow Rate {m3/s} Corridor_Flr_5 Dummy Exhaust Fan Node, !- Air Inlet Node Name Corridor_Flr_5 Dummy Exhaust Fan Outlet Node Name, !- Air Outlet Node Name General; !- End-Use Subcategory !- =========== ALL OBJECTS IN CLASS: HEATEXCHANGER:AIRTOAIR:SENSIBLEANDLATENT =========== HeatExchanger:AirToAir:SensibleAndLatent, ICU OA Heat Recovery, !- Name Always_On, !- Availability Schedule Name AUTOSIZE, !- Nominal Supply Air Flow Rate {m3/s} 0.70, !- Sensible Effectiveness at 100% Heating Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 100% Heating Air Flow {dimensionless} 0.70, !- Sensible Effectiveness at 75% Heating Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 75% Heating Air Flow {dimensionless} 0.75, !- Sensible Effectiveness at 100% Cooling Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 100% Cooling Air Flow {dimensionless} 0.75, !- Sensible Effectiveness at 75% Cooling Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 75% Cooling Air Flow {dimensionless} VAV_ICU_OAInlet Node, !- Supply Air Inlet Node Name ICU Heat Recovery Outlet Node, !- Supply Air Outlet Node Name VAV_ICU_OARelief Node, !- Exhaust Air Inlet Node Name ICU Heat Recovery Secondary Outlet Node, !- Exhaust Air Outlet Node Name 1539.37265225, !- Nominal Electric Power {W} Yes, !- Supply Air Outlet Temperature Control Rotary, !- Heat Exchanger Type ExhaustOnly, !- Frost Control Type -23.3, !- Threshold Temperature {C} 0.167, !- Initial Defrost Time Fraction {dimensionless} 1.44; !- Rate of Defrost Time Fraction Increase {1/K} !- =========== ALL OBJECTS IN CLASS: HEATEXCHANGER:AIRTOAIR:SENSIBLEANDLATENT =========== HeatExchanger:AirToAir:SensibleAndLatent, PATRMS OA Heat Recovery, !- Name Always_On, !- Availability Schedule Name AUTOSIZE, !- Nominal Supply Air Flow Rate {m3/s} 0.70, !- Sensible Effectiveness at 100% Heating Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 100% Heating Air Flow {dimensionless} 0.70, !- Sensible Effectiveness at 75% Heating Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 75% Heating Air Flow {dimensionless} 0.75, !- Sensible Effectiveness at 100% Cooling Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 100% Cooling Air Flow {dimensionless} 0.75, !- Sensible Effectiveness at 75% Cooling Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 75% Cooling Air Flow {dimensionless} VAV_PATRMS_OAInlet Node, !- Supply Air Inlet Node Name PATRMS Heat Recovery Outlet Node, !- Supply Air Outlet Node Name VAV_PATRMS_OARelief Node,!- Exhaust Air Inlet Node Name PATRMS Heat Recovery Secondary Outlet Node, !- Exhaust Air Outlet Node Name 3273.229555, !- Nominal Electric Power {W} Yes, !- Supply Air Outlet Temperature Control Rotary, !- Heat Exchanger Type ExhaustOnly, !- Frost Control Type -23.3, !- Threshold Temperature {C} 0.167, !- Initial Defrost Time Fraction {dimensionless} 1.44; !- Rate of Defrost Time Fraction Increase {1/K} HeatExchanger:AirToAir:SensibleAndLatent, VAV_1 OA Heat Recovery, !- Name Always_On, !- Availability Schedule Name AUTOSIZE, !- Nominal Supply Air Flow Rate {m3/s} 0.70, !- Sensible Effectiveness at 100% Heating Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 100% Heating Air Flow {dimensionless} 0.70, !- Sensible Effectiveness at 75% Heating Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 75% Heating Air Flow {dimensionless} 0.75, !- Sensible Effectiveness at 100% Cooling Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 100% Cooling Air Flow {dimensionless} 0.75, !- Sensible Effectiveness at 75% Cooling Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 75% Cooling Air Flow {dimensionless} VAV_1_OAInlet Node, !- Supply Air Inlet Node Name VAV_1 Heat Recovery Outlet Node, !- Supply Air Outlet Node Name VAV_1_OARelief Node, !- Exhaust Air Inlet Node Name VAV_1 Heat Recovery Secondary Outlet Node, !- Exhaust Air Outlet Node Name 3154.26375, !- Nominal Electric Power {W} Yes, !- Supply Air Outlet Temperature Control Rotary, !- Heat Exchanger Type ExhaustOnly, !- Frost Control Type -23.3, !- Threshold Temperature {C} 0.167, !- Initial Defrost Time Fraction {dimensionless} 1.44; !- Rate of Defrost Time Fraction Increase {1/K} Curve:Cubic, Tower_Fan_Curve, !- Name 0, !- Coefficient1 Constant 0, !- Coefficient2 x 0, !- Coefficient3 x**2 1, !- Coefficient4 x**3 0.0, !- Minimum Value of x 1.0; !- Maximum Value of x !- =========== ALL OBJECTS IN CLASS: HEATEXCHANGER:FLUIDTOFLUID =========== HeatExchanger:FluidToFluid, Heat Recovery Chiller Bypass Heat Exchanger, !- Name Bypass Heat Exchanger Status, !- Availability Schedule Name Heat Recovery Chiller Bypass Heat Exchanger Demand Side Inlet, !- Loop Demand Side Inlet Node Name Heat Recovery Chiller Bypass Heat Exchanger Demand Side Outlet, !- Loop Demand Side Outlet Node Name autosize, !- Loop Demand Side Design Flow Rate {m3/s} CoolSys1 Demand Supply Side Inlet Pipe Outlet Node, !- Loop Supply Side Inlet Node Name Heat Recovery Chiller Bypass Heat Exchanger Outlet, !- Loop Supply Side Outlet Node Name autosize, !- Loop Supply Side Design Flow Rate {m3/s} Ideal, !- Heat Exchange Model Type autosize, !- Heat Exchanger U-Factor Times Area Value {W/K} UncontrolledOn, !- Control Type , !- Heat Exchanger Setpoint Node Name , !- Minimum Temperature Difference to Activate Heat Exchanger {deltaC} LoopToLoop, !- Heat Transfer Metering End Use Type , !- Component Override Loop Supply Side Inlet Node Name , !- Component Override Loop Demand Side Inlet Node Name Loop, !- Component Override Cooling Control Temperature Mode 1; !- Sizing Factor HeatExchanger:FluidToFluid, Bypass Heat Exchanger , !- Name ALWAYS_ON, !- Availability Schedule Name CoolSys1 Exchanger Supply Inlet Node, !- Loop Demand Side Inlet Node Name CoolSys1 Exchanger Supply Outlet Node, !- Loop Demand Side Outlet Node Name autosize, !- Loop Demand Side Design Flow Rate {m3/s} CoolSys1 Exchanger Demand Inlet Node, !- Loop Supply Side Inlet Node Name CoolSys1 Exchanger Demand Outlet Node, !- Loop Supply Side Outlet Node Name autosize, !- Loop Supply Side Design Flow Rate {m3/s} Ideal, !- Heat Exchange Model Type autosize, !- Heat Exchanger U-Factor Times Area Value {W/K} UncontrolledOn, !- Control Type , !- Heat Exchanger Setpoint Node Name 0.01, !- Minimum Temperature Difference to Activate Heat Exchanger {deltaC} LoopToLoop, !- Heat Transfer Metering End Use Type , !- Component Override Loop Supply Side Inlet Node Name , !- Component Override Loop Demand Side Inlet Node Name Loop, !- Component Override Cooling Control Temperature Mode 1; !- Sizing Factor !- =========== ALL OBJECTS IN CLASS: WATER USE EQUIPMENT =========== WaterUse:Equipment, ER_Exam1_Mult4_Flr_1 sub cat, !- Name WaterUse, !- End-Use Subcategory 1.05555555555556E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name ER_Exam1_Mult4_Flr_1 sub cat Temp Sched, !- Target Temperature Schedule Name ER_Exam1_Mult4_Flr_1 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name ER_Exam1_Mult4_Flr_1, !- Zone Name ER_Exam1_Mult4_Flr_1 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name ER_Exam1_Mult4_Flr_1 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, ER_Trauma1_Flr_1 sub cat,!- Name WaterUse, !- End-Use Subcategory 1.05555555555556E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name ER_Trauma1_Flr_1 sub cat Temp Sched, !- Target Temperature Schedule Name ER_Trauma1_Flr_1 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name ER_Trauma1_Flr_1, !- Zone Name ER_Trauma1_Flr_1 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name ER_Trauma1_Flr_1 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, ER_Exam3_Mult4_Flr_1 sub cat, !- Name WaterUse, !- End-Use Subcategory 1.05555555555556E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name ER_Exam3_Mult4_Flr_1 sub cat Temp Sched, !- Target Temperature Schedule Name ER_Exam3_Mult4_Flr_1 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name ER_Exam3_Mult4_Flr_1, !- Zone Name ER_Exam3_Mult4_Flr_1 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name ER_Exam3_Mult4_Flr_1 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, ER_Trauma2_Flr_1 sub cat,!- Name WaterUse, !- End-Use Subcategory 1.05555555555556E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name ER_Trauma2_Flr_1 sub cat Temp Sched, !- Target Temperature Schedule Name ER_Trauma2_Flr_1 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name ER_Trauma2_Flr_1, !- Zone Name ER_Trauma2_Flr_1 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name ER_Trauma2_Flr_1 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, ER_Triage_Mult4_Flr_1 sub cat, !- Name WaterUse, !- End-Use Subcategory 1.05555555555556E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name ER_Triage_Mult4_Flr_1 sub cat Temp Sched, !- Target Temperature Schedule Name ER_Triage_Mult4_Flr_1 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name ER_Triage_Mult4_Flr_1, !- Zone Name ER_Triage_Mult4_Flr_1 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name ER_Triage_Mult4_Flr_1 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, OR1_Flr_2 sub cat, !- Name WaterUse, !- End-Use Subcategory 2.11111111111111E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name OR1_Flr_2 sub cat Temp Sched, !- Target Temperature Schedule Name OR1_Flr_2 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name OR1_Flr_2, !- Zone Name OR1_Flr_2 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name OR1_Flr_2 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, OR2_Mult5_Flr_2 sub cat, !- Name WaterUse, !- End-Use Subcategory 2.11111111111111E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name OR2_Mult5_Flr_2 sub cat Temp Sched, !- Target Temperature Schedule Name OR2_Mult5_Flr_2 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name OR2_Mult5_Flr_2, !- Zone Name OR2_Mult5_Flr_2 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name OR2_Mult5_Flr_2 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, OR3_Flr_2 sub cat, !- Name WaterUse, !- End-Use Subcategory 2.11111111111111E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name OR3_Flr_2 sub cat Temp Sched, !- Target Temperature Schedule Name OR3_Flr_2 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name OR3_Flr_2, !- Zone Name OR3_Flr_2 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name OR3_Flr_2 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, OR4_Flr_2 sub cat, !- Name WaterUse, !- End-Use Subcategory 6.30555555555556E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name OR4_Flr_2 sub cat Temp Sched, !- Target Temperature Schedule Name OR4_Flr_2 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name OR4_Flr_2, !- Zone Name OR4_Flr_2 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name OR4_Flr_2 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, PatRoom1_Mult10_Flr_3 sub cat, !- Name WaterUse, !- End-Use Subcategory 1.05555555555556E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name PatRoom1_Mult10_Flr_3 sub cat Temp Sched, !- Target Temperature Schedule Name PatRoom1_Mult10_Flr_3 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name PatRoom1_Mult10_Flr_3, !- Zone Name PatRoom1_Mult10_Flr_3 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name PatRoom1_Mult10_Flr_3 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, PatRoom2_Flr_3 sub cat, !- Name WaterUse, !- End-Use Subcategory 1.05555555555556E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name PatRoom2_Flr_3 sub cat Temp Sched, !- Target Temperature Schedule Name PatRoom2_Flr_3 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name PatRoom2_Flr_3, !- Zone Name PatRoom2_Flr_3 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name PatRoom2_Flr_3 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, PatRoom3_Mult10_Flr_3 sub cat, !- Name WaterUse, !- End-Use Subcategory 1.05555555555556E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name PatRoom3_Mult10_Flr_3 sub cat Temp Sched, !- Target Temperature Schedule Name PatRoom3_Mult10_Flr_3 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name PatRoom3_Mult10_Flr_3, !- Zone Name PatRoom3_Mult10_Flr_3 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name PatRoom3_Mult10_Flr_3 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, PatRoom4_Flr_3 sub cat, !- Name WaterUse, !- End-Use Subcategory 1.05555555555556E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name PatRoom4_Flr_3 sub cat Temp Sched, !- Target Temperature Schedule Name PatRoom4_Flr_3 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name PatRoom4_Flr_3, !- Zone Name PatRoom4_Flr_3 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name PatRoom4_Flr_3 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, PatRoom5_Mult10_Flr_3 sub cat, !- Name WaterUse, !- End-Use Subcategory 1.05555555555556E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name PatRoom5_Mult10_Flr_3 sub cat Temp Sched, !- Target Temperature Schedule Name PatRoom5_Mult10_Flr_3 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name PatRoom5_Mult10_Flr_3, !- Zone Name PatRoom5_Mult10_Flr_3 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name PatRoom5_Mult10_Flr_3 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, PhysTherapy_Flr_3 sub cat, !- Name WaterUse, !- End-Use Subcategory 1.05555555555556E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name PhysTherapy_Flr_3 sub cat Temp Sched, !- Target Temperature Schedule Name PhysTherapy_Flr_3 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name PhysTherapy_Flr_3, !- Zone Name PhysTherapy_Flr_3 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name PhysTherapy_Flr_3 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, PatRoom6_Flr_3 sub cat, !- Name WaterUse, !- End-Use Subcategory 1.05555555555556E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name PatRoom6_Flr_3 sub cat Temp Sched, !- Target Temperature Schedule Name PatRoom6_Flr_3 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name PatRoom6_Flr_3, !- Zone Name PatRoom6_Flr_3 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name PatRoom6_Flr_3 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, PatRoom7_Mult10_Flr_3 sub cat, !- Name WaterUse, !- End-Use Subcategory 1.05555555555556E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name PatRoom7_Mult10_Flr_3 sub cat Temp Sched, !- Target Temperature Schedule Name PatRoom7_Mult10_Flr_3 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name PatRoom7_Mult10_Flr_3, !- Zone Name PatRoom7_Mult10_Flr_3 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name PatRoom7_Mult10_Flr_3 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, PatRoom8_Flr_3 sub cat, !- Name WaterUse, !- End-Use Subcategory 1.05555555555556E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name PatRoom8_Flr_3 sub cat Temp Sched, !- Target Temperature Schedule Name PatRoom8_Flr_3 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name PatRoom8_Flr_3, !- Zone Name PatRoom8_Flr_3 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name PatRoom8_Flr_3 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, Lab_Flr_3 sub cat, !- Name WaterUse, !- End-Use Subcategory 2.11111111111111E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name Lab_Flr_3 sub cat Temp Sched, !- Target Temperature Schedule Name Lab_Flr_3 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Lab_Flr_3, !- Zone Name Lab_Flr_3 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name Lab_Flr_3 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, PatRoom1_Mult10_Flr_4 sub cat, !- Name WaterUse, !- End-Use Subcategory 1.05555555555556E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name PatRoom1_Mult10_Flr_4 sub cat Temp Sched, !- Target Temperature Schedule Name PatRoom1_Mult10_Flr_4 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name PatRoom1_Mult10_Flr_4, !- Zone Name PatRoom1_Mult10_Flr_4 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name PatRoom1_Mult10_Flr_4 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, PatRoom2_Flr_4 sub cat, !- Name WaterUse, !- End-Use Subcategory 1.05555555555556E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name PatRoom2_Flr_4 sub cat Temp Sched, !- Target Temperature Schedule Name PatRoom2_Flr_4 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name PatRoom2_Flr_4, !- Zone Name PatRoom2_Flr_4 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name PatRoom2_Flr_4 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, PatRoom3_Mult10_Flr_4 sub cat, !- Name WaterUse, !- End-Use Subcategory 1.05555555555556E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name PatRoom3_Mult10_Flr_4 sub cat Temp Sched, !- Target Temperature Schedule Name PatRoom3_Mult10_Flr_4 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name PatRoom3_Mult10_Flr_4, !- Zone Name PatRoom3_Mult10_Flr_4 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name PatRoom3_Mult10_Flr_4 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, PatRoom4_Flr_4 sub cat, !- Name WaterUse, !- End-Use Subcategory 1.05555555555556E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name PatRoom4_Flr_4 sub cat Temp Sched, !- Target Temperature Schedule Name PatRoom4_Flr_4 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name PatRoom4_Flr_4, !- Zone Name PatRoom4_Flr_4 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name PatRoom4_Flr_4 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, PatRoom5_Mult10_Flr_4 sub cat, !- Name WaterUse, !- End-Use Subcategory 1.05555555555556E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name PatRoom5_Mult10_Flr_4 sub cat Temp Sched, !- Target Temperature Schedule Name PatRoom5_Mult10_Flr_4 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name PatRoom5_Mult10_Flr_4, !- Zone Name PatRoom5_Mult10_Flr_4 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name PatRoom5_Mult10_Flr_4 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, Radiology_Flr_4 sub cat, !- Name WaterUse, !- End-Use Subcategory 1.05555555555556E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name Radiology_Flr_4 sub cat Temp Sched, !- Target Temperature Schedule Name Radiology_Flr_4 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Radiology_Flr_4, !- Zone Name Radiology_Flr_4 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name Radiology_Flr_4 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, PatRoom6_Flr_4 sub cat, !- Name WaterUse, !- End-Use Subcategory 1.05555555555556E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name PatRoom6_Flr_4 sub cat Temp Sched, !- Target Temperature Schedule Name PatRoom6_Flr_4 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name PatRoom6_Flr_4, !- Zone Name PatRoom6_Flr_4 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name PatRoom6_Flr_4 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, PatRoom7_Mult10_Flr_4 sub cat, !- Name WaterUse, !- End-Use Subcategory 1.05555555555556E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name PatRoom7_Mult10_Flr_4 sub cat Temp Sched, !- Target Temperature Schedule Name PatRoom7_Mult10_Flr_4 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name PatRoom7_Mult10_Flr_4, !- Zone Name PatRoom7_Mult10_Flr_4 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name PatRoom7_Mult10_Flr_4 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, PatRoom8_Flr_4 sub cat, !- Name WaterUse, !- End-Use Subcategory 1.05555555555556E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name PatRoom8_Flr_4 sub cat Temp Sched, !- Target Temperature Schedule Name PatRoom8_Flr_4 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name PatRoom8_Flr_4, !- Zone Name PatRoom8_Flr_4 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name PatRoom8_Flr_4 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, Lab_Flr_4 sub cat, !- Name WaterUse, !- End-Use Subcategory 2.11111111111111E-6, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name Lab_Flr_4 sub cat Temp Sched, !- Target Temperature Schedule Name Lab_Flr_4 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Lab_Flr_4, !- Zone Name Lab_Flr_4 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name Lab_Flr_4 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, Kitchen_Flr_5 sub cat, !- Name WaterUse, !- End-Use Subcategory 6.059182e-5, !- Peak Flow Rate {m3/s} BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name Kitchen_Flr_5 sub cat Temp Sched, !- Target Temperature Schedule Name Kitchen_Flr_5 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Kitchen_Flr_5, !- Zone Name Kitchen_Flr_5 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name Kitchen_Flr_5 sub cat Latent fract sched; !- Latent Fraction Schedule Name !- =========== ALL OBJECTS IN CLASS: WATER USE CONNECTIONS =========== WaterUse:Connections, ER_Exam1_Mult4_Flr_1 sub cat, !- Name ER_Exam1_Mult4_Flr_1 sub cat Water Inlet Node, !- Inlet Node Name ER_Exam1_Mult4_Flr_1 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} ER_Exam1_Mult4_Flr_1 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, ER_Trauma1_Flr_1 sub cat,!- Name ER_Trauma1_Flr_1 sub cat Water Inlet Node, !- Inlet Node Name ER_Trauma1_Flr_1 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} ER_Trauma1_Flr_1 sub cat;!- Water Use Equipment 1 Name WaterUse:Connections, ER_Exam3_Mult4_Flr_1 sub cat, !- Name ER_Exam3_Mult4_Flr_1 sub cat Water Inlet Node, !- Inlet Node Name ER_Exam3_Mult4_Flr_1 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} ER_Exam3_Mult4_Flr_1 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, ER_Trauma2_Flr_1 sub cat,!- Name ER_Trauma2_Flr_1 sub cat Water Inlet Node, !- Inlet Node Name ER_Trauma2_Flr_1 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} ER_Trauma2_Flr_1 sub cat;!- Water Use Equipment 1 Name WaterUse:Connections, ER_Triage_Mult4_Flr_1 sub cat, !- Name ER_Triage_Mult4_Flr_1 sub cat Water Inlet Node, !- Inlet Node Name ER_Triage_Mult4_Flr_1 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} ER_Triage_Mult4_Flr_1 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, OR1_Flr_2 sub cat, !- Name OR1_Flr_2 sub cat Water Inlet Node, !- Inlet Node Name OR1_Flr_2 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} OR1_Flr_2 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, OR2_Mult5_Flr_2 sub cat, !- Name OR2_Mult5_Flr_2 sub cat Water Inlet Node, !- Inlet Node Name OR2_Mult5_Flr_2 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} OR2_Mult5_Flr_2 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, OR3_Flr_2 sub cat, !- Name OR3_Flr_2 sub cat Water Inlet Node, !- Inlet Node Name OR3_Flr_2 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} OR3_Flr_2 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, OR4_Flr_2 sub cat, !- Name OR4_Flr_2 sub cat Water Inlet Node, !- Inlet Node Name OR4_Flr_2 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} OR4_Flr_2 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, PatRoom1_Mult10_Flr_3 sub cat, !- Name PatRoom1_Mult10_Flr_3 sub cat Water Inlet Node, !- Inlet Node Name PatRoom1_Mult10_Flr_3 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} PatRoom1_Mult10_Flr_3 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, PatRoom2_Flr_3 sub cat, !- Name PatRoom2_Flr_3 sub cat Water Inlet Node, !- Inlet Node Name PatRoom2_Flr_3 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} PatRoom2_Flr_3 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, PatRoom3_Mult10_Flr_3 sub cat, !- Name PatRoom3_Mult10_Flr_3 sub cat Water Inlet Node, !- Inlet Node Name PatRoom3_Mult10_Flr_3 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} PatRoom3_Mult10_Flr_3 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, PatRoom4_Flr_3 sub cat, !- Name PatRoom4_Flr_3 sub cat Water Inlet Node, !- Inlet Node Name PatRoom4_Flr_3 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} PatRoom4_Flr_3 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, PatRoom5_Mult10_Flr_3 sub cat, !- Name PatRoom5_Mult10_Flr_3 sub cat Water Inlet Node, !- Inlet Node Name PatRoom5_Mult10_Flr_3 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} PatRoom5_Mult10_Flr_3 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, PhysTherapy_Flr_3 sub cat, !- Name PhysTherapy_Flr_3 sub cat Water Inlet Node, !- Inlet Node Name PhysTherapy_Flr_3 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} PhysTherapy_Flr_3 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, PatRoom6_Flr_3 sub cat, !- Name PatRoom6_Flr_3 sub cat Water Inlet Node, !- Inlet Node Name PatRoom6_Flr_3 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} PatRoom6_Flr_3 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, PatRoom7_Mult10_Flr_3 sub cat, !- Name PatRoom7_Mult10_Flr_3 sub cat Water Inlet Node, !- Inlet Node Name PatRoom7_Mult10_Flr_3 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} PatRoom7_Mult10_Flr_3 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, PatRoom8_Flr_3 sub cat, !- Name PatRoom8_Flr_3 sub cat Water Inlet Node, !- Inlet Node Name PatRoom8_Flr_3 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} PatRoom8_Flr_3 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, Lab_Flr_3 sub cat, !- Name Lab_Flr_3 sub cat Water Inlet Node, !- Inlet Node Name Lab_Flr_3 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Lab_Flr_3 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, PatRoom1_Mult10_Flr_4 sub cat, !- Name PatRoom1_Mult10_Flr_4 sub cat Water Inlet Node, !- Inlet Node Name PatRoom1_Mult10_Flr_4 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} PatRoom1_Mult10_Flr_4 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, PatRoom2_Flr_4 sub cat, !- Name PatRoom2_Flr_4 sub cat Water Inlet Node, !- Inlet Node Name PatRoom2_Flr_4 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} PatRoom2_Flr_4 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, PatRoom3_Mult10_Flr_4 sub cat, !- Name PatRoom3_Mult10_Flr_4 sub cat Water Inlet Node, !- Inlet Node Name PatRoom3_Mult10_Flr_4 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} PatRoom3_Mult10_Flr_4 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, PatRoom4_Flr_4 sub cat, !- Name PatRoom4_Flr_4 sub cat Water Inlet Node, !- Inlet Node Name PatRoom4_Flr_4 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} PatRoom4_Flr_4 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, PatRoom5_Mult10_Flr_4 sub cat, !- Name PatRoom5_Mult10_Flr_4 sub cat Water Inlet Node, !- Inlet Node Name PatRoom5_Mult10_Flr_4 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} PatRoom5_Mult10_Flr_4 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, Radiology_Flr_4 sub cat, !- Name Radiology_Flr_4 sub cat Water Inlet Node, !- Inlet Node Name Radiology_Flr_4 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Radiology_Flr_4 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, PatRoom6_Flr_4 sub cat, !- Name PatRoom6_Flr_4 sub cat Water Inlet Node, !- Inlet Node Name PatRoom6_Flr_4 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} PatRoom6_Flr_4 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, PatRoom7_Mult10_Flr_4 sub cat, !- Name PatRoom7_Mult10_Flr_4 sub cat Water Inlet Node, !- Inlet Node Name PatRoom7_Mult10_Flr_4 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} PatRoom7_Mult10_Flr_4 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, PatRoom8_Flr_4 sub cat, !- Name PatRoom8_Flr_4 sub cat Water Inlet Node, !- Inlet Node Name PatRoom8_Flr_4 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} PatRoom8_Flr_4 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, Lab_Flr_4 sub cat, !- Name Lab_Flr_4 sub cat Water Inlet Node, !- Inlet Node Name Lab_Flr_4 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Lab_Flr_4 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, Kitchen_Flr_5 sub cat, !- Name Kitchen_Flr_5 sub cat Water Inlet Node, !- Inlet Node Name Kitchen_Flr_5 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Kitchen_Flr_5 sub cat; !- Water Use Equipment 1 Name !No PV for this case !- =========== ALL OBJECTS IN CLASS: ENERGYMANAGEMENTSYSTEM:SENSOR =========== EnergyManagementSystem:Sensor, T_OA, !- Name , !- Output:Variable or Output:Meter Index Key Name Site Outdoor Air Drybulb Temperature; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Patrms_FanMassFlow, !- Name VAV_PATRMS Supply Equipment Outlet Node, !- Output:Variable or Output:Meter Index Key Name System Node Mass Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Patrms_Humidifier_Status,!- Name VAV_PATRMS Humidifier, !- Output:Variable or Output:Meter Index Key Name Humidifier Water Volume Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Patrms_HeatC_Status, !- Name VAV_PATRMS_HeatC, !- Output:Variable or Output:Meter Index Key Name Heating Coil Heating Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Patrms_AfterHumidifier_Temp, !- Name VAV_PATRMS Humidifier-VAV_PATRMS_ExtraElecHeatCNode, !- Output:Variable or Output:Meter Index Key Name System Node Temperature; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Patrms_AfterElecHeatC_Temp, !- Name VAV_PATRMS EXTRAELECHEATC-VAV_PATRMS_EXTRAWATERHEATCNODE, !- Output:Variable or Output:Meter Index Key Name System Node Temperature; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, ER_FanMassFlow, !- Name VAV_ER Supply Equipment Outlet Node, !- Output:Variable or Output:Meter Index Key Name System Node Mass Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, ER_Humidifier_Status, !- Name VAV_ER Humidifier, !- Output:Variable or Output:Meter Index Key Name Humidifier Water Volume Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, ER_HeatC_Status, !- Name VAV_ER_HeatC, !- Output:Variable or Output:Meter Index Key Name Heating Coil Heating Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, ER_AfterHumidifier_Temp, !- Name VAV_ER Humidifier-VAV_ER_ExtraElecHeatCNode, !- Output:Variable or Output:Meter Index Key Name System Node Temperature; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, ER_AfterElecHeatC_Temp, !- Name VAV_ER EXTRAELECHEATC-VAV_ER_EXTRAWATERHEATCNODE, !- Output:Variable or Output:Meter Index Key Name System Node Temperature; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, OR_FanMassFlow, !- Name VAV_OR Supply Equipment Outlet Node, !- Output:Variable or Output:Meter Index Key Name System Node Mass Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, OR_Humidifier_Status, !- Name VAV_OR Humidifier, !- Output:Variable or Output:Meter Index Key Name Humidifier Water Volume Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, OR_HeatC_Status, !- Name VAV_OR_HeatC, !- Output:Variable or Output:Meter Index Key Name Heating Coil Heating Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, OR_AfterHumidifier_Temp, !- Name VAV_OR Humidifier-VAV_OR_ExtraElecHeatCNode, !- Output:Variable or Output:Meter Index Key Name System Node Temperature; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, OR_AfterElecHeatC_Temp, !- Name VAV_OR EXTRAELECHEATC-VAV_OR_EXTRAWATERHEATCNODE, !- Output:Variable or Output:Meter Index Key Name System Node Temperature; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, ICU_FanMassFlow, !- Name VAV_ICU Supply Equipment Outlet Node, !- Output:Variable or Output:Meter Index Key Name System Node Mass Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, ICU_Humidifier_Status, !- Name VAV_ICU Humidifier, !- Output:Variable or Output:Meter Index Key Name Humidifier Water Volume Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, ICU_HeatC_Status, !- Name VAV_ICU_HeatC, !- Output:Variable or Output:Meter Index Key Name Heating Coil Heating Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, ICU_AfterHumidifier_Temp,!- Name VAV_ICU Humidifier-VAV_ICU_ExtraElecHeatCNode, !- Output:Variable or Output:Meter Index Key Name System Node Temperature; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, ICU_AfterElecHeatC_Temp, !- Name VAV_ICU EXTRAELECHEATC-VAV_ICU_EXTRAWATERHEATCNODE, !- Output:Variable or Output:Meter Index Key Name System Node Temperature; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, LABS_FanMassFlow, !- Name VAV_LABS Supply Equipment Outlet Node, !- Output:Variable or Output:Meter Index Key Name System Node Mass Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, LABS_Humidifier_Status, !- Name VAV_LABS Humidifier, !- Output:Variable or Output:Meter Index Key Name Humidifier Water Volume Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, LABS_HeatC_Status, !- Name VAV_LABS_HeatC, !- Output:Variable or Output:Meter Index Key Name Heating Coil Heating Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, LABS_AfterHumidifier_Temp, !- Name VAV_LABS Humidifier-VAV_LABS_ExtraElecHeatCNode, !- Output:Variable or Output:Meter Index Key Name System Node Temperature; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, LABS_AfterElecHeatC_Temp,!- Name VAV_LABS EXTRAELECHEATC-VAV_LABS_EXTRAWATERHEATCNODE, !- Output:Variable or Output:Meter Index Key Name System Node Temperature; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, HotWaterDemand, !- Name HeatSys1, !- Output:Variable or Output:Meter Index Key Name Plant Supply Side Heating Demand Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, CHWR, Heat Recovery Chiller Inlet, System Node Temperature; !- =========== ALL OBJECTS IN CLASS: ENERGYMANAGEMENTSYSTEM:ACTUATOR =========== EnergyManagementSystem:Actuator, Patrms_ExtraElecHeatC_SP,!- Name VAV_PATRMS EXTRAELECHEATC-VAV_PATRMS_EXTRAWATERHEATCNODE, !- Actuated Component Unique Name System Node Setpoint, !- Actuated Component Type Temperature Setpoint; !- Actuated Component Control Type EnergyManagementSystem:Actuator, Patrms_ExtraWaterHeatC_SP, !- Name VAV_PATRMS ExtraWaterHeatC-VAV_PATRMS_CoolCNode, !- Actuated Component Unique Name System Node Setpoint, !- Actuated Component Type Temperature Setpoint; !- Actuated Component Control Type EnergyManagementSystem:Actuator, Patrms_ExtraElecHeatC_Status, !- Name Patrms_ExtraElecHeatC_Sch, !- Actuated Component Unique Name Schedule:Compact, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:Actuator, Patrms_ExtraWaterHeatC_Status, !- Name Patrms_ExtraWaterHeatC_Sch, !- Actuated Component Unique Name Schedule:Compact, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:Actuator, ER_ExtraElecHeatC_SP, !- Name VAV_ER EXTRAELECHEATC-VAV_ER_EXTRAWATERHEATCNODE, !- Actuated Component Unique Name System Node Setpoint, !- Actuated Component Type Temperature Setpoint; !- Actuated Component Control Type EnergyManagementSystem:Actuator, ER_ExtraWaterHeatC_SP, !- Name VAV_ER ExtraWaterHeatC-VAV_ER_CoolCNode, !- Actuated Component Unique Name System Node Setpoint, !- Actuated Component Type Temperature Setpoint; !- Actuated Component Control Type EnergyManagementSystem:Actuator, ER_ExtraElecHeatC_Status,!- Name ER_ExtraElecHeatC_Sch, !- Actuated Component Unique Name Schedule:Compact, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:Actuator, ER_ExtraWaterHeatC_Status, !- Name ER_ExtraWaterHeatC_Sch, !- Actuated Component Unique Name Schedule:Compact, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:Actuator, OR_ExtraElecHeatC_SP, !- Name VAV_OR EXTRAELECHEATC-VAV_OR_EXTRAWATERHEATCNODE, !- Actuated Component Unique Name System Node Setpoint, !- Actuated Component Type Temperature Setpoint; !- Actuated Component Control Type EnergyManagementSystem:Actuator, OR_ExtraWaterHeatC_SP, !- Name VAV_OR ExtraWaterHeatC-VAV_OR_CoolCNode, !- Actuated Component Unique Name System Node Setpoint, !- Actuated Component Type Temperature Setpoint; !- Actuated Component Control Type EnergyManagementSystem:Actuator, OR_ExtraElecHeatC_Status,!- Name OR_ExtraElecHeatC_Sch, !- Actuated Component Unique Name Schedule:Compact, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:Actuator, OR_ExtraWaterHeatC_Status, !- Name OR_ExtraWaterHeatC_Sch, !- Actuated Component Unique Name Schedule:Compact, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:Actuator, ICU_ExtraElecHeatC_SP, !- Name VAV_ICU EXTRAELECHEATC-VAV_ICU_EXTRAWATERHEATCNODE, !- Actuated Component Unique Name System Node Setpoint, !- Actuated Component Type Temperature Setpoint; !- Actuated Component Control Type EnergyManagementSystem:Actuator, ICU_ExtraWaterHeatC_SP, !- Name VAV_ICU ExtraWaterHeatC-VAV_ICU_CoolCNode, !- Actuated Component Unique Name System Node Setpoint, !- Actuated Component Type Temperature Setpoint; !- Actuated Component Control Type EnergyManagementSystem:Actuator, ICU_ExtraElecHeatC_Status, !- Name ICU_ExtraElecHeatC_Sch, !- Actuated Component Unique Name Schedule:Compact, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:Actuator, ICU_ExtraWaterHeatC_Status, !- Name ICU_ExtraWaterHeatC_Sch, !- Actuated Component Unique Name Schedule:Compact, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:Actuator, LABS_ExtraElecHeatC_SP, !- Name VAV_LABS EXTRAELECHEATC-VAV_LABS_EXTRAWATERHEATCNODE, !- Actuated Component Unique Name System Node Setpoint, !- Actuated Component Type Temperature Setpoint; !- Actuated Component Control Type EnergyManagementSystem:Actuator, LABS_ExtraWaterHeatC_SP, !- Name VAV_LABS ExtraWaterHeatC-VAV_LABS_CoolCNode, !- Actuated Component Unique Name System Node Setpoint, !- Actuated Component Type Temperature Setpoint; !- Actuated Component Control Type EnergyManagementSystem:Actuator, LABS_ExtraElecHeatC_Status, !- Name LABS_ExtraElecHeatC_Sch, !- Actuated Component Unique Name Schedule:Compact, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:Actuator, LABS_ExtraWaterHeatC_Status, !- Name LABS_ExtraWaterHeatC_Sch,!- Actuated Component Unique Name Schedule:Compact, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:Actuator, BypassHXStatus, !- Name Bypass Heat Exchanger Status, !- Actuated Component Unique Name Schedule:Constant, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:Actuator, HRC_SPM_Reset, !- Name Heat Recovery Chiller Bypass Loop Setpoint Schedule, !- Actuated Component Unique Name Schedule:Constant, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type !- =========== ALL OBJECTS IN CLASS: ENERGYMANAGEMENTSYSTEM:PROGRAMCALLINGMANAGER =========== EnergyManagementSystem:ProgramCallingManager, Patrms_Main_Manager, !- Name InsideHVACSystemIterationLoop, !- EnergyPlus Model Calling Point Patrms_Main; !- Program Name 1 EnergyManagementSystem:ProgramCallingManager, ER_Main_Manager, !- Name InsideHVACSystemIterationLoop, !- EnergyPlus Model Calling Point ER_Main; !- Program Name 1 EnergyManagementSystem:ProgramCallingManager, OR_Main_Manager, !- Name InsideHVACSystemIterationLoop, !- EnergyPlus Model Calling Point OR_Main; !- Program Name 1 EnergyManagementSystem:ProgramCallingManager, ICU_Main_Manager, !- Name InsideHVACSystemIterationLoop, !- EnergyPlus Model Calling Point ICU_Main; !- Program Name 1 EnergyManagementSystem:ProgramCallingManager, LABS_Main_Manager, !- Name InsideHVACSystemIterationLoop, !- EnergyPlus Model Calling Point LABS_Main; !- Program Name 1 EnergyManagementSystem:ProgramCallingManager, BypassHXStatus_Manager, !- Name AfterPredictorBeforeHVACManagers, !- EnergyPlus Model Calling Point BypassHXStatus_Prg; !- Program Name 1 !- =========== ALL OBJECTS IN CLASS: ENERGYMANAGEMENTSYSTEM:PROGRAM =========== EnergyManagementSystem:Program, Patrms_Main, !- Name IF Patrms_Humidifier_Status > 0, !- Program Line 1 SET Patrms_ExtraElecHeatC_Status = 1, !- Program Line 2 SET Patrms_ExtraElecHeatC_SP = Patrms_AfterHumidifier_Temp + 0.36, !- ELSE, !- SET Patrms_ExtraElecHeatC_Status = 0, !- SET Patrms_ExtraElecHeatC_SP = NULL, !- ENDIF, !- IF T_OA < 10 && Patrms_HeatC_Status >0, !- SET HeatGain = 3 * (Patrms_FanDesignMass/1.2) *2118, !- SET FlowRate = (Patrms_FanMassFlow/1.2)*2118, !- SET Patrms_PreheatDeltaT = HeatGain/(1.08*FlowRate), !- SET Patrms_ExtraWaterHeatC_Status = 1, !- SET Patrms_ExtraWaterHeatC_SP = Patrms_AfterElecHeatC_Temp + Patrms_PreheatDeltaT, !- ELSE, !- SET Patrms_ExtraWaterHeatC_Status = 0, !- SET Patrms_ExtraWaterHeatC_SP = NULL, !- ENDIF; !- EnergyManagementSystem:Program, ER_Main, !- Name IF ER_Humidifier_Status > 0, !- Program Line 1 SET ER_ExtraElecHeatC_Status = 1, !- Program Line 2 SET ER_ExtraElecHeatC_SP = ER_AfterHumidifier_Temp + 0.36, !- ELSE, !- SET ER_ExtraElecHeatC_Status = 0, !- SET ER_ExtraElecHeatC_SP = NULL, !- ENDIF, !- IF T_OA < 10 && ER_HeatC_Status >0, !- SET HeatGain = 3 * (ER_FanDesignMass/1.2) *2118, !- SET FlowRate = (ER_FanMassFlow/1.2)*2118, !- SET ER_PreheatDeltaT = HeatGain/(1.08*FlowRate), !- SET ER_ExtraWaterHeatC_Status = 1, !- SET ER_ExtraWaterHeatC_SP = ER_AfterElecHeatC_Temp + ER_PreheatDeltaT, !- ELSE, !- SET ER_ExtraWaterHeatC_Status = 0, !- SET ER_ExtraWaterHeatC_SP = NULL, !- ENDIF; !- EnergyManagementSystem:Program, OR_Main, !- Name IF OR_Humidifier_Status > 0, !- Program Line 1 SET OR_ExtraElecHeatC_Status = 1, !- Program Line 2 SET OR_ExtraElecHeatC_SP = OR_AfterHumidifier_Temp + 0.36, !- ELSE, !- SET OR_ExtraElecHeatC_Status = 0, !- SET OR_ExtraElecHeatC_SP = NULL, !- ENDIF, !- IF T_OA < 10 && OR_HeatC_Status >0, !- SET HeatGain = 8.5 * (OR_FanDesignMass/1.2) *2118, !- SET FlowRate = (OR_FanMassFlow/1.2)*2118, !- SET OR_PreheatDeltaT = HeatGain/(1.08*FlowRate), !- SET OR_ExtraWaterHeatC_Status = 1, !- SET OR_ExtraWaterHeatC_SP = OR_AfterElecHeatC_Temp + OR_PreheatDeltaT, !- ELSE, !- SET OR_ExtraWaterHeatC_Status = 0, !- SET OR_ExtraWaterHeatC_SP = NULL, !- ENDIF; !- EnergyManagementSystem:Program, ICU_Main, !- Name IF ICU_Humidifier_Status > 0, !- Program Line 1 SET ICU_ExtraElecHeatC_Status = 1, !- Program Line 2 SET ICU_ExtraElecHeatC_SP = ICU_AfterHumidifier_Temp + 0.36, !- ELSE, !- SET ICU_ExtraElecHeatC_Status = 0, !- SET ICU_ExtraElecHeatC_SP = NULL, !- ENDIF, !- IF T_OA < 10 && ICU_HeatC_Status >0, !- SET HeatGain = 3 * (ICU_FanDesignMass/1.2) *2118, !- SET FlowRate = (ICU_FanMassFlow/1.2)*2118, !- SET ICU_PreheatDeltaT = HeatGain/(1.08*FlowRate), !- SET ICU_ExtraWaterHeatC_Status = 1, !- SET ICU_ExtraWaterHeatC_SP = ICU_AfterElecHeatC_Temp + ICU_PreheatDeltaT, !- ELSE, !- SET ICU_ExtraWaterHeatC_Status = 0, !- SET ICU_ExtraWaterHeatC_SP = NULL, !- ENDIF; !- EnergyManagementSystem:Program, LABS_Main, !- Name IF LABS_Humidifier_Status > 0, !- Program Line 1 SET LABS_ExtraElecHeatC_Status = 1, !- Program Line 2 SET LABS_ExtraElecHeatC_SP = LABS_AfterHumidifier_Temp + 0.36, !- ELSE, !- SET LABS_ExtraElecHeatC_Status = 0, !- SET LABS_ExtraElecHeatC_SP = NULL, !- ENDIF, !- IF T_OA < 10 && LABS_HeatC_Status >0, !- SET HeatGain = 3 * (LABS_FanDesignMass/1.2) *2118, !- SET FlowRate = (LABS_FanMassFlow/1.2)*2118, !- SET LABS_PreheatDeltaT = HeatGain/(1.08*FlowRate), !- SET LABS_ExtraWaterHeatC_Status = 1, !- SET LABS_ExtraWaterHeatC_SP = LABS_AfterElecHeatC_Temp + LABS_PreheatDeltaT, !- ELSE, !- SET LABS_ExtraWaterHeatC_Status = 0, !- SET LABS_ExtraWaterHeatC_SP = NULL, !- ENDIF; !- EnergyManagementSystem:Program, ! HtRecChlr BypassHXStatus_Prg, !- Name SET HLOAD = HotWaterDemand / (129842.5275 * ((1/4.47) + 1)), ! HtRecChlr EMS HR Chiller Condenser Capacity SET HLOAD = @Min HLOAD 1, SET HLOAD = CHWR - (HLOAD * 8.33), SET HLOAD = @Max HLOAD 6.7, SET HRC_SPM_Reset = @Min HLOAD 14.44; EnergyManagementSystem:GlobalVariable, HLOAD; !- Erl Variable 1 Name !- =========== ALL OBJECTS IN CLASS: ENERGYMANAGEMENTSYSTEM:GLOBALVARIABLE =========== EnergyManagementSystem:GlobalVariable, Patrms_PreheatDeltaT; !- Erl Variable 1 Name EnergyManagementSystem:GlobalVariable, ER_PreheatDeltaT; !- Erl Variable 1 Name EnergyManagementSystem:GlobalVariable, OR_PreheatDeltaT; !- Erl Variable 1 Name EnergyManagementSystem:GlobalVariable, ICU_PreheatDeltaT; !- Erl Variable 1 Name EnergyManagementSystem:GlobalVariable, LABS_PreheatDeltaT; !- Erl Variable 1 Name !- =========== ALL OBJECTS IN CLASS: ENERGYMANAGEMENTSYSTEM:OUTPUTVARIABLE =========== EnergyManagementSystem:OutputVariable, Patrms_ExtraElecHeatC_Status, !- Name Patrms_ExtraElecHeatC_Status, !- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:OutputVariable, Patrms_ExtraWaterHeatC_Status, !- Name Patrms_ExtraWaterHeatC_Status, !- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:OutputVariable, Patrms_ExtraElecHeatC_SP,!- Name Patrms_ExtraElecHeatC_SP,!- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:OutputVariable, Patrms_ExtraWaterHeatC_SP, !- Name Patrms_ExtraWaterHeatC_SP, !- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:OutputVariable, Patrms_PreheatDeltaT, !- Name Patrms_PreheatDeltaT, !- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:OutputVariable, ER_ExtraElecHeatC_Status,!- Name ER_ExtraElecHeatC_Status,!- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:OutputVariable, ER_ExtraWaterHeatC_Status, !- Name ER_ExtraWaterHeatC_Status, !- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:OutputVariable, ER_ExtraElecHeatC_SP, !- Name ER_ExtraElecHeatC_SP, !- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:OutputVariable, ER_ExtraWaterHeatC_SP, !- Name ER_ExtraWaterHeatC_SP, !- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:OutputVariable, ER_PreheatDeltaT, !- Name ER_PreheatDeltaT, !- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:OutputVariable, OR_ExtraElecHeatC_Status,!- Name OR_ExtraElecHeatC_Status,!- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:OutputVariable, OR_ExtraWaterHeatC_Status, !- Name OR_ExtraWaterHeatC_Status, !- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:OutputVariable, OR_ExtraElecHeatC_SP, !- Name OR_ExtraElecHeatC_SP, !- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:OutputVariable, OR_ExtraWaterHeatC_SP, !- Name OR_ExtraWaterHeatC_SP, !- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:OutputVariable, OR_PreheatDeltaT, !- Name OR_PreheatDeltaT, !- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:OutputVariable, ICU_ExtraElecHeatC_Status, !- Name ICU_ExtraElecHeatC_Status, !- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:OutputVariable, ICU_ExtraWaterHeatC_Status, !- Name ICU_ExtraWaterHeatC_Status, !- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:OutputVariable, ICU_ExtraElecHeatC_SP, !- Name ICU_ExtraElecHeatC_SP, !- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:OutputVariable, ICU_ExtraWaterHeatC_SP, !- Name ICU_ExtraWaterHeatC_SP, !- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:OutputVariable, ICU_PreheatDeltaT, !- Name ICU_PreheatDeltaT, !- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:OutputVariable, LABS_ExtraElecHeatC_Status, !- Name LABS_ExtraElecHeatC_Status, !- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:OutputVariable, LABS_ExtraWaterHeatC_Status, !- Name LABS_ExtraWaterHeatC_Status, !- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:OutputVariable, LABS_ExtraElecHeatC_SP, !- Name LABS_ExtraElecHeatC_SP, !- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:OutputVariable, LABS_ExtraWaterHeatC_SP, !- Name LABS_ExtraWaterHeatC_SP, !- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units EnergyManagementSystem:OutputVariable, LABS_PreheatDeltaT, !- Name LABS_PreheatDeltaT, !- EMS Variable Name Averaged, !- Type of Data in Variable SystemTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name ; !- Units !- =========== ALL OBJECTS IN CLASS: ENERGYMANAGEMENTSYSTEM:INTERNALVARIABLE =========== EnergyManagementSystem:InternalVariable, Patrms_FanDesignMass, !- Name VAV_PATRMS_Fan, !- Internal Data Index Key Name Fan Maximum Mass Flow Rate; !- Internal Data Type EnergyManagementSystem:InternalVariable, ER_FanDesignMass, !- Name VAV_ER_Fan, !- Internal Data Index Key Name Fan Maximum Mass Flow Rate; !- Internal Data Type EnergyManagementSystem:InternalVariable, OR_FanDesignMass, !- Name VAV_OR_Fan, !- Internal Data Index Key Name Fan Maximum Mass Flow Rate; !- Internal Data Type EnergyManagementSystem:InternalVariable, ICU_FanDesignMass, !- Name VAV_ICU_Fan, !- Internal Data Index Key Name Fan Maximum Mass Flow Rate; !- Internal Data Type EnergyManagementSystem:InternalVariable, LABS_FanDesignMass, !- Name VAV_LABS_Fan, !- Internal Data Index Key Name Fan Maximum Mass Flow Rate; !- Internal Data Type !- =========== ALL OBJECTS IN CLASS: OUTPUT:VARIABLE =========== !Output:Variable,*,Site Outdoor Air Drybulb Temperature,Hourly; !Output:Variable,*,Site Outdoor Air Wetbulb Temperature,Hourly; !Output:Variable,*,Heating Coil Heating Energy,hourly; !- HVAC Sum J ! the total amount of heat transfer taking place in the coil !Output:Variable,*,Cooling Coil Total Cooling Energy,hourly; !- HVAC Sum J ! Energy removed from air loop by Cooling Coils. total amount of heat transfer taking place in the coil !Output:Variable,*,Pump Mass Flow Rate,hourly; !- HVAC Average ! the water outlet mass flow rate !Output:Variable,*,Fan Air Mass Flow Rate,hourly; !- HVAC Average ! the amount of outdoor air entering the zone !Output:Variable,*,Air System Outdoor Air Mass Flow Rate,hourly; !- HVAC Average ! average outdoor air mass flow rate introduced by the outdoor air controller !Output:Variable,*,Boiler Heating Energy,hourly; !- HVAC Sum J ! the heating output (load) of the boiler !Output:Variable,*,Chiller Evaporator Cooling Energy,hourly; !- HVAC Sum J ! the evaporator heat transfer which is the cooling delivered by the chiller !! Heating coils named as XXX_EXTRAWATERHEATC are dummy heating coils to capture heat transfer from the preheating coil to the bypass air when the air handling units are in the cooling mode. !! Heating coils named as XXX_ EXTRAELECHEATC are dummy heating coils to capture heat transfer from the electric steam humidifier airstream in the air handling units. !! The modeling strategy is documented in Section 5.2.2.8 Addendum 90.1-2010as Humidification System Requirements in the “ANSI/ASHRAE/IES Standard 90.1-2013 Determination of Energy Savings: Quantitative Analysis" report. !! Fans named as XXXDUMMY EXHAUST FAN are dummy exhaust fans in the source zone of the !! The modeling strategy is documented in Section B.1.2.4 Addendum u: Expands Use of Transfer Air in the "Energy Savings Analysis: ANSI/ASHRAE/IES Standard 90.1-2016" report. !! Additional output variables that can be useful to review the mechancial equipment load profiles !! Utility and Submeter ! Output:Meter,Electricity:Facility,Hourly; ! Output:Meter,Gas:Facility,Hourly; ! Output:Meter,InteriorLights:Electricity,Hourly; ! Output:Meter,ExteriorLights:Electricity,Hourly; ! Output:Meter,InteriorEquipment:Electricity,Hourly; ! Output:Meter,ExteriorEquipment:Electricity,Hourly; ! Output:Meter,Fans:Electricity,Hourly; ! Output:Meter,Pumps:Electricity,Hourly; ! Output:Meter,Heating:Electricity,Hourly; ! Output:Meter,Cooling:Electricity,Hourly; ! Output:Meter,HeatRejection:Electricity,Hourly; ! Output:Meter,Humidifier:Electricity,Hourly; ! Output:Meter,HeatRecovery:Electricity,Hourly; ! Output:Meter,DHW:Electricity,Hourly; ! Output:Meter,Cogeneration:Electricity,Hourly; ! Output:Meter,Refrigeration:Electricity,Hourly; ! Output:Meter,WaterSystems:Electricity,Hourly; ! ! Output:Meter,InteriorLights:Gas,Hourly; ! Output:Meter,ExteriorLights:Gas,Hourly; ! Output:Meter,InteriorEquipment:Gas,Hourly; ! Output:Meter,ExteriorEquipment:Gas,Hourly; ! Output:Meter,Fans:Gas,Hourly; ! Output:Meter,Pumps:Gas,Hourly; ! Output:Meter,Heating:Gas,Hourly; ! Output:Meter,Cooling:Gas,Hourly; ! Output:Meter,HeatRejection:Gas,Hourly; ! Output:Meter,Humidifier:Gas,Hourly; ! Output:Meter,HeatRecovery:Gas,Hourly; ! Output:Meter,DHW:Gas,Hourly; ! Output:Meter,Cogeneration:Gas,Hourly; ! Output:Meter,Refrigeration:Gas,Hourly; ! Output:Meter,WaterSystems:Gas,Hourly; !! Site ! Output:Variable,MinOA_Sched,Schedule Value,Hourly; !! Outdoor Air ! Output:Variable,VAV_1_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_2_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_ER_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_OR_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_ICU_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_PATRMS_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_LABS_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,CAV_KITCHEN_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; !! Return Air ! Output:Variable,VAV_1 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_2 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_ER Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_OR Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_ICU Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_PATRMS Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_LABS Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,CAV_KITCHEN Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_1 Supply Equipment Inlet Node,System Node Temperature,Hourly; ! Output:Variable,VAV_2 Supply Equipment Inlet Node,System Node Temperature,Hourly; ! Output:Variable,VAV_ER Supply Equipment Inlet Node,System Node Temperature,Hourly; ! Output:Variable,VAV_OR Supply Equipment Inlet Node,System Node Temperature,Hourly; ! Output:Variable,VAV_ICU Supply Equipment Inlet Node,System Node Temperature,Hourly; ! Output:Variable,VAV_PATRMS Supply Equipment Inlet Node,System Node Temperature,Hourly; ! Output:Variable,VAV_LABS Supply Equipment Inlet Node,System Node Temperature,Hourly; ! Output:Variable,CAV_KITCHEN Supply Equipment Inlet Node,System Node Temperature,Hourly; ! Output:Variable,VAV_1 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,VAV_2 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,VAV_ER Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,VAV_OR Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,VAV_ICU Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,VAV_PATRMS Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,VAV_LABS Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,CAV_KITCHEN Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; !! Supply Air ! Output:Variable,VAV_1 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_2 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_ER Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_OR Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_ICU Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_PATRMS Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_LABS Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,CAV_KITCHEN Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_1 Supply Equipment Outlet Node,System Node Temperature,Hourly; ! Output:Variable,VAV_2 Supply Equipment Outlet Node,System Node Temperature,Hourly; ! Output:Variable,VAV_ER Supply Equipment Outlet Node,System Node Temperature,Hourly; ! Output:Variable,VAV_OR Supply Equipment Outlet Node,System Node Temperature,Hourly; ! Output:Variable,VAV_ICU Supply Equipment Outlet Node,System Node Temperature,Hourly; ! Output:Variable,VAV_PATRMS Supply Equipment Outlet Node,System Node Temperature,Hourly; ! Output:Variable,VAV_LABS Supply Equipment Outlet Node,System Node Temperature,Hourly; ! Output:Variable,CAV_KITCHEN Supply Equipment Outlet Node,System Node Temperature,Hourly; ! Output:Variable,VAV_1 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,VAV_2 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,VAV_ER Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,VAV_OR Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,VAV_ICU Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,VAV_PATRMS Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,VAV_LABS Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,CAV_KITCHEN Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; !! Coil Load ! Output:Variable,*,Air System Cooling Coil Total Cooling Energy,Hourly; ! Output:Variable,*,Air System Heating Coil Total Heating Energy,Hourly; ! Output:Variable,*,Chiller Evaporator Cooling Rate,Hourly; !! Plants ! Output:Variable,*,Boiler Heating Rate,Hourly; !! SHW ! Output:Variable,*,Water Heater Heating Rate,Hourly; ! The average heating rate supplied by the heater element or burner. !! Fan and Pump ! Output:Variable,*,Fan Electric Power,hourly; !- HVAC Average W ! Output:Variable,*,Pump Electric Power,hourly; !- HVAC Average W ! Output:Variable,*,Humidifier Electric Power,hourly; !- HVAC Average W !! additional variables added on 07 29 2016 ! Output:Variable,*,Water Heater Heating Rate,hourly; !- HVAC Average W ! Output:Variable,*,Chiller Condenser Heat Transfer Energy,hourly; !- HVAC Sum J ! Output:Variable,*,Chiller Condenser Inlet Temperature,hourly; !- HVAC Average C ! Output:Variable,*,Chiller Condenser Outlet Temperature,hourly; !- HVAC Average C ! Output:Variable,*,Pump Shaft Power,hourly; !- HVAC Average W ! Output:Variable,*,Pump Outlet Temperature,hourly; !- HVAC Average C !- =========== ALL OBJECTS IN CLASS: REPORT =========== Output:Surfaces:Drawing,DXF; Output:Surfaces:List,Details; Output:VariableDictionary,IDF; Output:Constructions,Constructions; !- =========== ALL OBJECTS IN CLASS: REPORT:TABLE:STYLE =========== OutputControl:Table:Style, CommaAndHTML; !- Column Separator !- =========== ALL OBJECTS IN CLASS: OUTPUTCONTROL:REPORTINGTOLERANCES =========== OutputControl:ReportingTolerances, 0.556, !- Tolerance for Time Heating Setpoint Not Met {deltaC} 0.556; !- Tolerance for Time Cooling Setpoint Not Met {deltaC} !- =========== ALL OBJECTS IN CLASS: REPORT:TABLE:PREDEFINED =========== Output:Table:SummaryReports, AllSummaryAndMonthly, !- Report 1 Name Standard62.1Summary; !- Report 2 Name !- =========== ALL OBJECTS IN CLASS: REPORT:TABLE:MONTHLY =========== Output:Meter:MeterFileOnly,InteriorLights:Electricity,Hourly; Output:Meter:MeterFileOnly,InteriorEquipment:Electricity,Hourly; Output:Table:Monthly, NameHolderMonthlySummary TaskPurpose ProgressIndicator, !- Name ProgressIndicator,ForDetermination2019, ... 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary CodeName ASHRAE901, !- Name ASHRAE901, ASHRAE1891, IECC, Title24, ORSC, IGCC, ... 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary CodeYear 2019, !- Name all years for ASHRAE90.1, IECC, ASHRAE189.1 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary CodeAmendment NoneAmend, !- Name StateAmend,EEM, NoneAmend for national or state without amendment 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary PrototypeName Hospital, !- Name 16 Prototypes 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary TaskScope National, !- Name National, State, City 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary State National, !- Name National for national analysis, NewYork, Utah,... for state analysis, or city name for city analysis. Spell out the name of the state without space between words 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary ClimateZone 6A, !- Name 0-8 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary RepresentCity USA_MN_Rochester, !- Name representative city like Honolulu for national, for each state, for city analysis. this is not the city of the weather file. The weather city will be extracted from epw file 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 !- =========== ALL OBJECTS IN CLASS: CONTROLLER:MECHANICALVENTILATION =========== Controller:MechanicalVentilation, VAV_1_DCV, !- Name BLDG_OA_FRAC_SCH, !- Availability Schedule Name Yes, !- Demand Controlled Ventilation VentilationRateProcedure,!- System Outdoor Air Method , !- Zone Maximum Outdoor Air Fraction {dimensionless} Basement, !- Zone 1 Name CM DSOA Basement, !- Design Specification Outdoor Air Object Name CM DSZAD Basement, !- Design Specification Zone Air Distribution Object Name 1 Office1_Mult4_Flr_1, !- Zone 2 Name CM DSOA Office1_Mult4_Flr_1, !- Design Specification Outdoor Air Object Name 2 CM DSZAD Office1_Mult4_Flr_1, !- Design Specification Zone Air Distribution Object Name 2 Lobby_Records_Flr_1, !- Zone 3 Name CM DSOA Lobby_Records_Flr_1, !- Design Specification Outdoor Air Object Name 3 CM DSZAD Lobby_Records_Flr_1, !- Design Specification Zone Air Distribution Object Name 3 Corridor_Flr_1, !- Zone 4 Name CM DSOA Corridor_Flr_1, !- Design Specification Outdoor Air Object Name 4 CM DSZAD Corridor_Flr_1, !- Design Specification Zone Air Distribution Object Name 4 Er_Nursestn_Lobby_Flr_1, !- Zone 5 Name CM DSOA Er_Nursestn_Lobby_Flr_1, !- Design Specification Outdoor Air Object Name 5 CM DSZAD Er_Nursestn_Lobby_Flr_1, !- Design Specification Zone Air Distribution Object Name 5 Icu_Nursestn_Lobby_Flr_2,!- Zone 6 Name CM DSOA Icu_Nursestn_Lobby_Flr_2, !- Design Specification Outdoor Air Object Name 6 CM DSZAD Icu_Nursestn_Lobby_Flr_2, !- Design Specification Zone Air Distribution Object Name 6 Corridor_Flr_2, !- Zone 7 Name CM DSOA Corridor_Flr_2, !- Design Specification Outdoor Air Object Name 7 CM DSZAD Corridor_Flr_2, !- Design Specification Zone Air Distribution Object Name 7 Or_Nursestn_Lobby_Flr_2, !- Zone 8 Name CM DSOA Or_Nursestn_Lobby_Flr_2, !- Design Specification Outdoor Air Object Name 8 CM DSZAD Or_Nursestn_Lobby_Flr_2; !- Design Specification Zone Air Distribution Object Name 8 DesignSpecification:ZoneAirDistribution, CM DSZAD Basement, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Office1_Mult4_Flr_1, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Lobby_Records_Flr_1, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Corridor_Flr_1, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Er_Nursestn_Lobby_Flr_1, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Icu_Nursestn_Lobby_Flr_2, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Corridor_Flr_2, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Or_Nursestn_Lobby_Flr_2, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:OutdoorAir, CM DSOA Basement, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000368277; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Office1_Mult4_Flr_1, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.00048257; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Lobby_Records_Flr_1, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000338645; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Corridor_Flr_1, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000304781; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Er_Nursestn_Lobby_Flr_1, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000338645; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Icu_Nursestn_Lobby_Flr_2, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000338645; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Corridor_Flr_2, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000304781; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Or_Nursestn_Lobby_Flr_2, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000338645; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} Controller:MechanicalVentilation, VAV_2_DCV, !- Name BLDG_OA_FRAC_SCH, !- Availability Schedule Name Yes, !- Demand Controlled Ventilation VentilationRateProcedure,!- System Outdoor Air Method , !- Zone Maximum Outdoor Air Fraction {dimensionless} Phystherapy_Flr_3, !- Zone 1 Name CM DSOA Phystherapy_Flr_3, !- Design Specification Outdoor Air Object Name 1 CM DSZAD Phystherapy_Flr_3, !- Design Specification Zone Air Distribution Object Name 1 Nursestn_Lobby_Flr_3, !- Zone 2 Name CM DSOA Nursestn_Lobby_Flr_3, !- Design Specification Outdoor Air Object Name 2 CM DSZAD Nursestn_Lobby_Flr_3, !- Design Specification Zone Air Distribution Object Name 2 Corridor_Se_Flr_3, !- Zone 3 Name CM DSOA Corridor_Se_Flr_3, !- Design Specification Outdoor Air Object Name 3 CM DSZAD Corridor_Se_Flr_3, !- Design Specification Zone Air Distribution Object Name 3 Corridor_Nw_Flr_3, !- Zone 4 Name CM DSOA Corridor_Nw_Flr_3, !- Design Specification Outdoor Air Object Name 4 CM DSZAD Corridor_Nw_Flr_3, !- Design Specification Zone Air Distribution Object Name 4 Radiology_Flr_4, !- Zone 5 Name CM DSOA Radiology_Flr_4, !- Design Specification Outdoor Air Object Name 5 CM DSZAD Radiology_Flr_4,!- Design Specification Zone Air Distribution Object Name 5 Nursestn_Lobby_Flr_4, !- Zone 6 Name CM DSOA Nursestn_Lobby_Flr_4, !- Design Specification Outdoor Air Object Name 6 CM DSZAD Nursestn_Lobby_Flr_4, !- Design Specification Zone Air Distribution Object Name 6 Corridor_Se_Flr_4, !- Zone 7 Name CM DSOA Corridor_Se_Flr_4, !- Design Specification Outdoor Air Object Name 7 CM DSZAD Corridor_Se_Flr_4, !- Design Specification Zone Air Distribution Object Name 7 Corridor_Nw_Flr_4, !- Zone 8 Name CM DSOA Corridor_Nw_Flr_4, !- Design Specification Outdoor Air Object Name 8 CM DSZAD Corridor_Nw_Flr_4, !- Design Specification Zone Air Distribution Object Name 8 Dining_Flr_5, !- Zone 9 Name CM DSOA Dining_Flr_5, !- Design Specification Outdoor Air Object Name 9 CM DSZAD Dining_Flr_5, !- Design Specification Zone Air Distribution Object Name 9 Nursestn_Lobby_Flr_5, !- Zone 10 Name CM DSOA Nursestn_Lobby_Flr_5, !- Design Specification Outdoor Air Object Name 10 CM DSZAD Nursestn_Lobby_Flr_5, !- Design Specification Zone Air Distribution Object Name 10 Office1_Flr_5, !- Zone 11 Name CM DSOA Office1_Flr_5, !- Design Specification Outdoor Air Object Name 11 CM DSZAD Office1_Flr_5, !- Design Specification Zone Air Distribution Object Name 11 Office2_Mult5_Flr_5, !- Zone 12 Name CM DSOA Office2_Mult5_Flr_5, !- Design Specification Outdoor Air Object Name 12 CM DSZAD Office2_Mult5_Flr_5, !- Design Specification Zone Air Distribution Object Name 12 Office3_Flr_5, !- Zone 13 Name CM DSOA Office3_Flr_5, !- Design Specification Outdoor Air Object Name 13 CM DSZAD Office3_Flr_5, !- Design Specification Zone Air Distribution Object Name 13 Office4_Mult6_Flr_5, !- Zone 14 Name CM DSOA Office4_Mult6_Flr_5, !- Design Specification Outdoor Air Object Name 14 CM DSZAD Office4_Mult6_Flr_5, !- Design Specification Zone Air Distribution Object Name 14 Corridor_Flr_5, !- Zone 15 Name CM DSOA Corridor_Flr_5, !- Design Specification Outdoor Air Object Name 15 CM DSZAD Corridor_Flr_5; !- Design Specification Zone Air Distribution Object Name 15 DesignSpecification:ZoneAirDistribution, CM DSZAD Phystherapy_Flr_3, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Nursestn_Lobby_Flr_3, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Corridor_Se_Flr_3, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Corridor_Nw_Flr_3, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Radiology_Flr_4,!- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Nursestn_Lobby_Flr_4, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Corridor_Se_Flr_4, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Corridor_Nw_Flr_4, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Dining_Flr_5, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Nursestn_Lobby_Flr_5, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Office1_Flr_5, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Office2_Mult5_Flr_5, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Office3_Flr_5, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Office4_Mult6_Flr_5, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Corridor_Flr_5, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:OutdoorAir, CM DSOA Phystherapy_Flr_3, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000380976; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Nursestn_Lobby_Flr_3, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000338645; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Corridor_Se_Flr_3, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000304781; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Corridor_Nw_Flr_3, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000304781; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Radiology_Flr_4, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000380976;!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Nursestn_Lobby_Flr_4, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000338645; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Corridor_Se_Flr_4, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000304781; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Corridor_Nw_Flr_4, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000304781; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Dining_Flr_5, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.001295319; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Nursestn_Lobby_Flr_5, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000338645; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Office1_Flr_5, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.00048257; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Office2_Mult5_Flr_5, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.00048257; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Office3_Flr_5, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.00048257; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Office4_Mult6_Flr_5, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.00048257; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Corridor_Flr_5, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000304781; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} EnergyManagementSystem:Sensor, Facility_Int_LTG, !- Name , !- Output:Variable or Output:Meter Index Key Name InteriorLights:Electricity; !- Output:Variable or Output:Meter Name EnergyManagementSystem:GlobalVariable, Wired_LTG; !- Erl Variable 1 Name EnergyManagementSystem:Program, Transformer_Load_Prog, !- Name SET Wired_LTG = Facility_Int_LTG*0.022; !- Program Line 1 EnergyManagementSystem:ProgramCallingManager, Transformer_Load_Prog_Manager, !- Name AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point Transformer_Load_Prog; !- Program Name 1 EnergyManagementSystem:OutputVariable, Wired_LTG, !- Name Wired_LTG, !- EMS Variable Name Summed, !- Type of Data in Variable ZoneTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name J; !- Units Meter:Custom, Wired_LTG_Electricity, !- Name Electricity, !- Fuel Type , !- Key Name 1 Wired_LTG; !- Output Variable or Meter Name 1 ElectricLoadCenter:Transformer, Transformer 1, !- Name Always_On, !- Availability Schedule Name PowerInFromGrid, !- Transformer Usage , !- Zone Name , !- Radiative Fraction 500000, !- Rated Capacity {VA} 3, !- Phase Aluminum, !- Conductor Material 150, !- Full Load Temperature Rise {C} 0.1, !- Fraction of Eddy Current Losses NominalEfficiency, !- Performance Input Method , !- Rated No Load Loss {W} , !- Rated Load Loss {W} 0.991, !- Nameplate Efficiency 0.35, !- Per Unit Load for Nameplate Efficiency 75, !- Reference Temperature for Nameplate Efficiency {C} , !- Per Unit Load for Maximum Efficiency Yes, !- Consider Transformer Loss for Utility Cost Wired_LTG_Electricity, !- Meter 1 Name InteriorEquipment:Electricity; !- Meter 2 Name EnergyManagementSystem:Sensor, Tower_PumpMassFlow, !- Name TowerWaterSys Supply Inlet Node, !- Output:Variable or Output:Meter Index Key Name System Node Mass Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Chiller1_Status, !- Name CoolSys1 Chiller1, !- Output:Variable or Output:Meter Index Key Name Chiller Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Chiller2_Status, !- Name CoolSys1 Chiller2, !- Output:Variable or Output:Meter Index Key Name Chiller Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, SensedCurveInput, !- Name Tower_Fan_Curve, !- Output:Variable or Output:Meter Index Key Name Performance Curve Input Variable 1 Value; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, SensedCurveValue, !- Name Tower_Fan_Curve, !- Output:Variable or Output:Meter Index Key Name Performance Curve Output Value; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Actuator, TowerCurveOutput, !- Name Tower_Fan_Curve, !- Actuated Component Unique Name Curve, !- Actuated Component Type Curve Result; !- Actuated Component Control Type EnergyManagementSystem:Program, ChangTowerFlow, !- Name IF Chiller1_Status > 0 && Chiller2_Status == 0 && SensedCurveInput > 0.2, !- Program Line 1 IF (0.5 * SensedCurveInput) > 0.2, !- Program Line 2 SET AirInput = 0.5 * SensedCurveInput, !- ELSE, !- SET AirInput = 0.2, !- ENDIF, !- SET TowerCurveOutput = 2* (AirInput^3), !- ELSE, !- SET TowerCurveOutput = SensedCurveValue, !- ENDIF; !- EnergyManagementSystem:ProgramCallingManager, ChangeTowerFlow_Manager, !- Name InsideHVACSystemIterationLoop, !- EnergyPlus Model Calling Point ChangTowerFlow; !- Program Name 1 EnergyManagementSystem:GlobalVariable, BoilerType, !- Erl Variable 1 Name CapRated, !- Erl Variable 2 Name EtRated, !- Erl Variable 3 Name PLRx, !- Ecx, !- SkinLossRate; !- EnergyManagementSystem:Sensor, BoilerPLR, !- Name HeatSys1 Boiler, !- Output:Variable or Output:Meter Index Key Name Boiler Part Load Ratio; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Actuator, BoilerCurve, !- Name HEATSYS1 BOILER EFFICIENCY CURVE, !- Actuated Component Unique Name Curve, !- Actuated Component Type Curve Result; !- Actuated Component Control Type EnergyManagementSystem:Program, ! Addendum AM SetBoilerPar, SET CapRated = 1470129.16, ! EMS Bolier Nominal Capacity {W}. SET EtRated = 0.8125, ! EMS Boiler Nominal Thermal Efficiency. overriden by script SET CapRated = (CapRated *3.412)/1000, !Change from W to MBH SET SkinLossRate = 0.02, SET BoilerType = 1, IF BoilerType == 1, IF CapRated >10000, SET PLRx = 0.2, ELSEIF CapRated >5000, SET PLRx = 0.25, ELSEIF CapRated >1000, SET PLRx = 0.33, ELSE, SET BoilerType = 2, SET PLRx = 0.2, ENDIF, ELSE, SET PLRx = 0.2, ENDIF, IF BoilerType == 1, SET CurveX = 0.975 + 0.305 * PLRx - 0.527 * (PLRx^2) + 0.249 * (PLRx^3), ELSE, SET CurveX = 0.907 + 0.320 * PLRx - 0.420 * (PLRx^2) + 0.193 * (PLRx^3), ENDIF, SET LoadX = CapRated * PLRx, SET Etx = CurveX * EtRated, SET InputEx = LoadX/Etx, SET SkinEx = CapRated * SkinLossRate, SET Ecx = (LoadX + SkinEx)/InputEx; EnergyManagementSystem:Program, SetBoilerCurve, !- Name IF BoilerPLR >= PLRx, !- Program Line 1 IF BoilerType == 1, !- Program Line 2 SET BoilerCurve = 0.975 + 0.305*BoilerPLR - 0.527*(BoilerPLR^2) + 0.249*(BoilerPLR^3), !- ELSE, !- SET BoilerCurve = 0.907 + 0.320*BoilerPLR - 0.420*(BoilerPLR^2) + 0.193*(BoilerPLR^3), !- ENDIF, !- ELSE, !- IF BoilerPLR == 0, !- SET BoilerCurve = NULL, !- ELSE, !- IF BoilerPLR <0.05, !- SET BoilerCurve = (0.05/(0.05 + SkinLossRate)) * (Ecx/EtRated), !- ELSE, !- SET BoilerCurve = (BoilerPLR/(BoilerPLR + SkinLossRate)) * (Ecx/EtRated), !- ENDIF, !- ENDIF, !- ENDIF; !- EnergyManagementSystem:ProgramCallingManager, BoilerParManager, !- Name BeginNewEnvironment, !- EnergyPlus Model Calling Point SetBoilerPar; !- Program Name 1 EnergyManagementSystem:ProgramCallingManager, BoilerCurveManager, !- Name InsideHVACSystemIterationLoop, !- EnergyPlus Model Calling Point SetBoilerCurve; !- Program Name 1 EnergyManagementSystem:InternalVariable, Chiller2PumpDesignFlow, !- Name COOLSYS1 CHILLER2 PUMP, !- Internal Data Index Key Name Pump Maximum Mass Flow Rate; !- Internal Data Type EnergyManagementSystem:Actuator, Chiller2PumpStatus, !- Name COOLSYS1 CHILLER2 PUMP, !- Actuated Component Unique Name Plant Component Pump:ConstantSpeed, !- Actuated Component Type On/Off Supervisory; !- Actuated Component Control Type EnergyManagementSystem:Actuator, Chiller1PumpFlow, !- Name COOLSYS1 CHILLER1 PUMP, !- Actuated Component Unique Name Pump, !- Actuated Component Type Pump Mass Flow Rate; !- Actuated Component Control Type EnergyManagementSystem:Actuator, Chiller2PumpFlow, !- Name COOLSYS1 CHILLER2 PUMP, !- Actuated Component Unique Name Pump, !- Actuated Component Type Pump Mass Flow Rate; !- Actuated Component Control Type EnergyManagementSystem:Actuator, Chiller2Status, !- Name COOLSYS1 CHILLER2, !- Actuated Component Unique Name Plant Component Chiller:Electric:ReformulatedEIR, !- Actuated Component Type On/Off Supervisory; !- Actuated Component Control Type EnergyManagementSystem:Sensor, ChillerPlantDemandLoad, !- Name CoolSys1_Supply, !- Output:Variable or Output:Meter Index Key Name Plant Supply Side Cooling Demand Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Program, ! Addendum DV PlantPump_EMS_Program, !- Name IF ChillerPlantDemandLoad < 927446.625, ! Addendum DV EMS Chiller Capacity. Will be overriden by sizing script. SET Chiller2PumpStatus = 0, !- Program Line 2 SET Chiller2Status = 0, !- SET Chiller2PumpFlow = 0,!- ELSE, !- SET Chiller2PumpStatus = 1, !- SET Chiller2Status = 1, !- SET Chiller2PumpFlow = Chiller2PumpDesignFlow, !- ENDIF; !- EnergyManagementSystem:ProgramCallingManager, PlantPump_EMS_Program Manager, !- Name InsideHVACSystemIterationLoop, !- EnergyPlus Model Calling Point PlantPump_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, VAV_1_OA_VRP, !- Name VAV_1, !- Output:Variable or Output:Meter Index Key Name Air System Outdoor Air Mechanical Ventilation Requested Mass Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, VAV_1_OA, !- Name VAV_1, !- Output:Variable or Output:Meter Index Key Name Air System Outdoor Air Mass Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Actuator, VAV_1_MAX_OA_FRAC, !- Name VAV_1 Max OA Fraction, !- Actuated Component Unique Name Schedule:Constant, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:Sensor, VAV_1_SUPPLY_FLOW, !- Name VAV_1_OA-VAV_1_CoolCNode, !- Output:Variable or Output:Meter Index Key Name System Node Standard Density Volume Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:ProgramCallingManager, VAV_1_MAX_OA_FRAC_Prog_Manager,!- Name AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point VAV_1_MAX_OA_FRAC; !- Program Name 1 EnergyManagementSystem:Program, VAV_1_MAX_OA_FRAC, !- Name IF VAV_1_OA > VAV_1_OA_VRP, !- Program Line 1 SET VAV_1_MAX_OA_FRAC = NULL, !- Program Line 2 ELSE, !- A4 IF VAV_1_SUPPLY_FLOW > 0, !- A5 SET VAV_1_MAX_OA_FRAC = 4.3265 / VAV_1_SUPPLY_FLOW,!- A6 ELSE, !- A7 SET VAV_1_MAX_OA_FRAC = NULL, !- A8 ENDIF, !- A9 ENDIF; !- A10 EnergyManagementSystem:Sensor, VAV_2_OA_VRP, !- Name VAV_2, !- Output:Variable or Output:Meter Index Key Name Air System Outdoor Air Mechanical Ventilation Requested Mass Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, VAV_2_OA, !- Name VAV_2, !- Output:Variable or Output:Meter Index Key Name Air System Outdoor Air Mass Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Actuator, VAV_2_MAX_OA_FRAC, !- Name VAV_2 Max OA Fraction, !- Actuated Component Unique Name Schedule:Constant, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:Sensor, VAV_2_SUPPLY_FLOW, !- Name VAV_2_OA-VAV_2_CoolCNode, !- Output:Variable or Output:Meter Index Key Name System Node Standard Density Volume Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:ProgramCallingManager, VAV_2_MAX_OA_FRAC_Prog_Manager,!- Name AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point VAV_2_MAX_OA_FRAC; !- Program Name 1 EnergyManagementSystem:Program, VAV_2_MAX_OA_FRAC, !- Name IF VAV_2_OA > VAV_2_OA_VRP, !- Program Line 1 SET VAV_2_MAX_OA_FRAC = NULL, !- Program Line 2 ELSE, !- A4 IF VAV_2_SUPPLY_FLOW > 0, !- A5 SET VAV_2_MAX_OA_FRAC = 4.4794 / VAV_2_SUPPLY_FLOW,!- A6 ELSE, !- A7 SET VAV_2_MAX_OA_FRAC = NULL, !- A8 ENDIF, !- A9 ENDIF; !- A10