import numpy as np from numpy.testing import ( assert_array_equal, assert_array_almost_equal, assert_array_less) import numpy.ma.testutils as matest import pytest import matplotlib.cm as cm import matplotlib.pyplot as plt import matplotlib.tri as mtri from matplotlib.path import Path from matplotlib.testing.decorators import image_comparison def test_delaunay(): # No duplicate points, regular grid. nx = 5 ny = 4 x, y = np.meshgrid(np.linspace(0.0, 1.0, nx), np.linspace(0.0, 1.0, ny)) x = x.ravel() y = y.ravel() npoints = nx*ny ntriangles = 2 * (nx-1) * (ny-1) nedges = 3*nx*ny - 2*nx - 2*ny + 1 # Create delaunay triangulation. triang = mtri.Triangulation(x, y) # The tests in the remainder of this function should be passed by any # triangulation that does not contain duplicate points. # Points - floating point. assert_array_almost_equal(triang.x, x) assert_array_almost_equal(triang.y, y) # Triangles - integers. assert len(triang.triangles) == ntriangles assert np.min(triang.triangles) == 0 assert np.max(triang.triangles) == npoints-1 # Edges - integers. assert len(triang.edges) == nedges assert np.min(triang.edges) == 0 assert np.max(triang.edges) == npoints-1 # Neighbors - integers. # Check that neighbors calculated by C++ triangulation class are the same # as those returned from delaunay routine. neighbors = triang.neighbors triang._neighbors = None assert_array_equal(triang.neighbors, neighbors) # Is each point used in at least one triangle? assert_array_equal(np.unique(triang.triangles), np.arange(npoints)) def test_delaunay_duplicate_points(): npoints = 10 duplicate = 7 duplicate_of = 3 np.random.seed(23) x = np.random.random(npoints) y = np.random.random(npoints) x[duplicate] = x[duplicate_of] y[duplicate] = y[duplicate_of] # Create delaunay triangulation. triang = mtri.Triangulation(x, y) # Duplicate points should be ignored, so the index of the duplicate points # should not appear in any triangle. assert_array_equal(np.unique(triang.triangles), np.delete(np.arange(npoints), duplicate)) def test_delaunay_points_in_line(): # Cannot triangulate points that are all in a straight line, but check # that delaunay code fails gracefully. x = np.linspace(0.0, 10.0, 11) y = np.linspace(0.0, 10.0, 11) with pytest.raises(RuntimeError): mtri.Triangulation(x, y) # Add an extra point not on the line and the triangulation is OK. x = np.append(x, 2.0) y = np.append(y, 8.0) mtri.Triangulation(x, y) @pytest.mark.parametrize('x, y', [ # Triangulation should raise a ValueError if passed less than 3 points. ([], []), ([1], [5]), ([1, 2], [5, 6]), # Triangulation should also raise a ValueError if passed duplicate points # such that there are less than 3 unique points. ([1, 2, 1], [5, 6, 5]), ([1, 2, 2], [5, 6, 6]), ([1, 1, 1, 2, 1, 2], [5, 5, 5, 6, 5, 6]), ]) def test_delaunay_insufficient_points(x, y): with pytest.raises(ValueError): mtri.Triangulation(x, y) def test_delaunay_robust(): # Fails when mtri.Triangulation uses matplotlib.delaunay, works when using # qhull. tri_points = np.array([ [0.8660254037844384, -0.5000000000000004], [0.7577722283113836, -0.5000000000000004], [0.6495190528383288, -0.5000000000000003], [0.5412658773652739, -0.5000000000000003], [0.811898816047911, -0.40625000000000044], [0.7036456405748561, -0.4062500000000004], [0.5953924651018013, -0.40625000000000033]]) test_points = np.asarray([ [0.58, -0.46], [0.65, -0.46], [0.65, -0.42], [0.7, -0.48], [0.7, -0.44], [0.75, -0.44], [0.8, -0.48]]) # Utility function that indicates if a triangle defined by 3 points # (xtri, ytri) contains the test point xy. Avoid calling with a point that # lies on or very near to an edge of the triangle. def tri_contains_point(xtri, ytri, xy): tri_points = np.vstack((xtri, ytri)).T return Path(tri_points).contains_point(xy) # Utility function that returns how many triangles of the specified # triangulation contain the test point xy. Avoid calling with a point that # lies on or very near to an edge of any triangle in the triangulation. def tris_contain_point(triang, xy): return sum(tri_contains_point(triang.x[tri], triang.y[tri], xy) for tri in triang.triangles) # Using matplotlib.delaunay, an invalid triangulation is created with # overlapping triangles; qhull is OK. triang = mtri.Triangulation(tri_points[:, 0], tri_points[:, 1]) for test_point in test_points: assert tris_contain_point(triang, test_point) == 1 # If ignore the first point of tri_points, matplotlib.delaunay throws a # KeyError when calculating the convex hull; qhull is OK. triang = mtri.Triangulation(tri_points[1:, 0], tri_points[1:, 1]) @image_comparison(['tripcolor1.png']) def test_tripcolor(): x = np.asarray([0, 0.5, 1, 0, 0.5, 1, 0, 0.5, 1, 0.75]) y = np.asarray([0, 0, 0, 0.5, 0.5, 0.5, 1, 1, 1, 0.75]) triangles = np.asarray([ [0, 1, 3], [1, 4, 3], [1, 2, 4], [2, 5, 4], [3, 4, 6], [4, 7, 6], [4, 5, 9], [7, 4, 9], [8, 7, 9], [5, 8, 9]]) # Triangulation with same number of points and triangles. triang = mtri.Triangulation(x, y, triangles) Cpoints = x + 0.5*y xmid = x[triang.triangles].mean(axis=1) ymid = y[triang.triangles].mean(axis=1) Cfaces = 0.5*xmid + ymid plt.subplot(121) plt.tripcolor(triang, Cpoints, edgecolors='k') plt.title('point colors') plt.subplot(122) plt.tripcolor(triang, facecolors=Cfaces, edgecolors='k') plt.title('facecolors') def test_no_modify(): # Test that Triangulation does not modify triangles array passed to it. triangles = np.array([[3, 2, 0], [3, 1, 0]], dtype=np.int32) points = np.array([(0, 0), (0, 1.1), (1, 0), (1, 1)]) old_triangles = triangles.copy() mtri.Triangulation(points[:, 0], points[:, 1], triangles).edges assert_array_equal(old_triangles, triangles) def test_trifinder(): # Test points within triangles of masked triangulation. x, y = np.meshgrid(np.arange(4), np.arange(4)) x = x.ravel() y = y.ravel() triangles = [[0, 1, 4], [1, 5, 4], [1, 2, 5], [2, 6, 5], [2, 3, 6], [3, 7, 6], [4, 5, 8], [5, 9, 8], [5, 6, 9], [6, 10, 9], [6, 7, 10], [7, 11, 10], [8, 9, 12], [9, 13, 12], [9, 10, 13], [10, 14, 13], [10, 11, 14], [11, 15, 14]] mask = np.zeros(len(triangles)) mask[8:10] = 1 triang = mtri.Triangulation(x, y, triangles, mask) trifinder = triang.get_trifinder() xs = [0.25, 1.25, 2.25, 3.25] ys = [0.25, 1.25, 2.25, 3.25] xs, ys = np.meshgrid(xs, ys) xs = xs.ravel() ys = ys.ravel() tris = trifinder(xs, ys) assert_array_equal(tris, [0, 2, 4, -1, 6, -1, 10, -1, 12, 14, 16, -1, -1, -1, -1, -1]) tris = trifinder(xs-0.5, ys-0.5) assert_array_equal(tris, [-1, -1, -1, -1, -1, 1, 3, 5, -1, 7, -1, 11, -1, 13, 15, 17]) # Test points exactly on boundary edges of masked triangulation. xs = [0.5, 1.5, 2.5, 0.5, 1.5, 2.5, 1.5, 1.5, 0.0, 1.0, 2.0, 3.0] ys = [0.0, 0.0, 0.0, 3.0, 3.0, 3.0, 1.0, 2.0, 1.5, 1.5, 1.5, 1.5] tris = trifinder(xs, ys) assert_array_equal(tris, [0, 2, 4, 13, 15, 17, 3, 14, 6, 7, 10, 11]) # Test points exactly on boundary corners of masked triangulation. xs = [0.0, 3.0] ys = [0.0, 3.0] tris = trifinder(xs, ys) assert_array_equal(tris, [0, 17]) # # Test triangles with horizontal colinear points. These are not valid # triangulations, but we try to deal with the simplest violations. # # If +ve, triangulation is OK, if -ve triangulation invalid, # if zero have colinear points but should pass tests anyway. delta = 0.0 x = [1.5, 0, 1, 2, 3, 1.5, 1.5] y = [-1, 0, 0, 0, 0, delta, 1] triangles = [[0, 2, 1], [0, 3, 2], [0, 4, 3], [1, 2, 5], [2, 3, 5], [3, 4, 5], [1, 5, 6], [4, 6, 5]] triang = mtri.Triangulation(x, y, triangles) trifinder = triang.get_trifinder() xs = [-0.1, 0.4, 0.9, 1.4, 1.9, 2.4, 2.9] ys = [-0.1, 0.1] xs, ys = np.meshgrid(xs, ys) tris = trifinder(xs, ys) assert_array_equal(tris, [[-1, 0, 0, 1, 1, 2, -1], [-1, 6, 6, 6, 7, 7, -1]]) # # Test triangles with vertical colinear points. These are not valid # triangulations, but we try to deal with the simplest violations. # # If +ve, triangulation is OK, if -ve triangulation invalid, # if zero have colinear points but should pass tests anyway. delta = 0.0 x = [-1, -delta, 0, 0, 0, 0, 1] y = [1.5, 1.5, 0, 1, 2, 3, 1.5] triangles = [[0, 1, 2], [0, 1, 5], [1, 2, 3], [1, 3, 4], [1, 4, 5], [2, 6, 3], [3, 6, 4], [4, 6, 5]] triang = mtri.Triangulation(x, y, triangles) trifinder = triang.get_trifinder() xs = [-0.1, 0.1] ys = [-0.1, 0.4, 0.9, 1.4, 1.9, 2.4, 2.9] xs, ys = np.meshgrid(xs, ys) tris = trifinder(xs, ys) assert_array_equal(tris, [[-1, -1], [0, 5], [0, 5], [0, 6], [1, 6], [1, 7], [-1, -1]]) # Test that changing triangulation by setting a mask causes the trifinder # to be reinitialised. x = [0, 1, 0, 1] y = [0, 0, 1, 1] triangles = [[0, 1, 2], [1, 3, 2]] triang = mtri.Triangulation(x, y, triangles) trifinder = triang.get_trifinder() xs = [-0.2, 0.2, 0.8, 1.2] ys = [0.5, 0.5, 0.5, 0.5] tris = trifinder(xs, ys) assert_array_equal(tris, [-1, 0, 1, -1]) triang.set_mask([1, 0]) assert trifinder == triang.get_trifinder() tris = trifinder(xs, ys) assert_array_equal(tris, [-1, -1, 1, -1]) def test_triinterp(): # Test points within triangles of masked triangulation. x, y = np.meshgrid(np.arange(4), np.arange(4)) x = x.ravel() y = y.ravel() z = 1.23*x - 4.79*y triangles = [[0, 1, 4], [1, 5, 4], [1, 2, 5], [2, 6, 5], [2, 3, 6], [3, 7, 6], [4, 5, 8], [5, 9, 8], [5, 6, 9], [6, 10, 9], [6, 7, 10], [7, 11, 10], [8, 9, 12], [9, 13, 12], [9, 10, 13], [10, 14, 13], [10, 11, 14], [11, 15, 14]] mask = np.zeros(len(triangles)) mask[8:10] = 1 triang = mtri.Triangulation(x, y, triangles, mask) linear_interp = mtri.LinearTriInterpolator(triang, z) cubic_min_E = mtri.CubicTriInterpolator(triang, z) cubic_geom = mtri.CubicTriInterpolator(triang, z, kind='geom') xs = np.linspace(0.25, 2.75, 6) ys = [0.25, 0.75, 2.25, 2.75] xs, ys = np.meshgrid(xs, ys) # Testing arrays with array.ndim = 2 for interp in (linear_interp, cubic_min_E, cubic_geom): zs = interp(xs, ys) assert_array_almost_equal(zs, (1.23*xs - 4.79*ys)) # Test points outside triangulation. xs = [-0.25, 1.25, 1.75, 3.25] ys = xs xs, ys = np.meshgrid(xs, ys) for interp in (linear_interp, cubic_min_E, cubic_geom): zs = linear_interp(xs, ys) assert_array_equal(zs.mask, [[True]*4]*4) # Test mixed configuration (outside / inside). xs = np.linspace(0.25, 1.75, 6) ys = [0.25, 0.75, 1.25, 1.75] xs, ys = np.meshgrid(xs, ys) for interp in (linear_interp, cubic_min_E, cubic_geom): zs = interp(xs, ys) matest.assert_array_almost_equal(zs, (1.23*xs - 4.79*ys)) mask = (xs >= 1) * (xs <= 2) * (ys >= 1) * (ys <= 2) assert_array_equal(zs.mask, mask) # 2nd order patch test: on a grid with an 'arbitrary shaped' triangle, # patch test shall be exact for quadratic functions and cubic # interpolator if *kind* = user (a, b, c) = (1.23, -4.79, 0.6) def quad(x, y): return a*(x-0.5)**2 + b*(y-0.5)**2 + c*x*y def gradient_quad(x, y): return (2*a*(x-0.5) + c*y, 2*b*(y-0.5) + c*x) x = np.array([0.2, 0.33367, 0.669, 0., 1., 1., 0.]) y = np.array([0.3, 0.80755, 0.4335, 0., 0., 1., 1.]) triangles = np.array([[0, 1, 2], [3, 0, 4], [4, 0, 2], [4, 2, 5], [1, 5, 2], [6, 5, 1], [6, 1, 0], [6, 0, 3]]) triang = mtri.Triangulation(x, y, triangles) z = quad(x, y) dz = gradient_quad(x, y) # test points for 2nd order patch test xs = np.linspace(0., 1., 5) ys = np.linspace(0., 1., 5) xs, ys = np.meshgrid(xs, ys) cubic_user = mtri.CubicTriInterpolator(triang, z, kind='user', dz=dz) interp_zs = cubic_user(xs, ys) assert_array_almost_equal(interp_zs, quad(xs, ys)) (interp_dzsdx, interp_dzsdy) = cubic_user.gradient(x, y) (dzsdx, dzsdy) = gradient_quad(x, y) assert_array_almost_equal(interp_dzsdx, dzsdx) assert_array_almost_equal(interp_dzsdy, dzsdy) # Cubic improvement: cubic interpolation shall perform better than linear # on a sufficiently dense mesh for a quadratic function. n = 11 x, y = np.meshgrid(np.linspace(0., 1., n+1), np.linspace(0., 1., n+1)) x = x.ravel() y = y.ravel() z = quad(x, y) triang = mtri.Triangulation(x, y, triangles=meshgrid_triangles(n+1)) xs, ys = np.meshgrid(np.linspace(0.1, 0.9, 5), np.linspace(0.1, 0.9, 5)) xs = xs.ravel() ys = ys.ravel() linear_interp = mtri.LinearTriInterpolator(triang, z) cubic_min_E = mtri.CubicTriInterpolator(triang, z) cubic_geom = mtri.CubicTriInterpolator(triang, z, kind='geom') zs = quad(xs, ys) diff_lin = np.abs(linear_interp(xs, ys) - zs) for interp in (cubic_min_E, cubic_geom): diff_cubic = np.abs(interp(xs, ys) - zs) assert np.max(diff_lin) >= 10 * np.max(diff_cubic) assert (np.dot(diff_lin, diff_lin) >= 100 * np.dot(diff_cubic, diff_cubic)) def test_triinterpcubic_C1_continuity(): # Below the 4 tests which demonstrate C1 continuity of the # TriCubicInterpolator (testing the cubic shape functions on arbitrary # triangle): # # 1) Testing continuity of function & derivatives at corner for all 9 # shape functions. Testing also function values at same location. # 2) Testing C1 continuity along each edge (as gradient is polynomial of # 2nd order, it is sufficient to test at the middle). # 3) Testing C1 continuity at triangle barycenter (where the 3 subtriangles # meet) # 4) Testing C1 continuity at median 1/3 points (midside between 2 # subtriangles) # Utility test function check_continuity def check_continuity(interpolator, loc, values=None): """ Checks the continuity of interpolator (and its derivatives) near location loc. Can check the value at loc itself if *values* is provided. *interpolator* TriInterpolator *loc* location to test (x0, y0) *values* (optional) array [z0, dzx0, dzy0] to check the value at *loc* """ n_star = 24 # Number of continuity points in a boundary of loc epsilon = 1.e-10 # Distance for loc boundary k = 100. # Continuity coefficient (loc_x, loc_y) = loc star_x = loc_x + epsilon*np.cos(np.linspace(0., 2*np.pi, n_star)) star_y = loc_y + epsilon*np.sin(np.linspace(0., 2*np.pi, n_star)) z = interpolator([loc_x], [loc_y])[0] (dzx, dzy) = interpolator.gradient([loc_x], [loc_y]) if values is not None: assert_array_almost_equal(z, values[0]) assert_array_almost_equal(dzx[0], values[1]) assert_array_almost_equal(dzy[0], values[2]) diff_z = interpolator(star_x, star_y) - z (tab_dzx, tab_dzy) = interpolator.gradient(star_x, star_y) diff_dzx = tab_dzx - dzx diff_dzy = tab_dzy - dzy assert_array_less(diff_z, epsilon*k) assert_array_less(diff_dzx, epsilon*k) assert_array_less(diff_dzy, epsilon*k) # Drawing arbitrary triangle (a, b, c) inside a unit square. (ax, ay) = (0.2, 0.3) (bx, by) = (0.33367, 0.80755) (cx, cy) = (0.669, 0.4335) x = np.array([ax, bx, cx, 0., 1., 1., 0.]) y = np.array([ay, by, cy, 0., 0., 1., 1.]) triangles = np.array([[0, 1, 2], [3, 0, 4], [4, 0, 2], [4, 2, 5], [1, 5, 2], [6, 5, 1], [6, 1, 0], [6, 0, 3]]) triang = mtri.Triangulation(x, y, triangles) for idof in range(9): z = np.zeros(7, dtype=np.float64) dzx = np.zeros(7, dtype=np.float64) dzy = np.zeros(7, dtype=np.float64) values = np.zeros([3, 3], dtype=np.float64) case = idof//3 values[case, idof % 3] = 1.0 if case == 0: z[idof] = 1.0 elif case == 1: dzx[idof % 3] = 1.0 elif case == 2: dzy[idof % 3] = 1.0 interp = mtri.CubicTriInterpolator(triang, z, kind='user', dz=(dzx, dzy)) # Test 1) Checking values and continuity at nodes check_continuity(interp, (ax, ay), values[:, 0]) check_continuity(interp, (bx, by), values[:, 1]) check_continuity(interp, (cx, cy), values[:, 2]) # Test 2) Checking continuity at midside nodes check_continuity(interp, ((ax+bx)*0.5, (ay+by)*0.5)) check_continuity(interp, ((ax+cx)*0.5, (ay+cy)*0.5)) check_continuity(interp, ((cx+bx)*0.5, (cy+by)*0.5)) # Test 3) Checking continuity at barycenter check_continuity(interp, ((ax+bx+cx)/3., (ay+by+cy)/3.)) # Test 4) Checking continuity at median 1/3-point check_continuity(interp, ((4.*ax+bx+cx)/6., (4.*ay+by+cy)/6.)) check_continuity(interp, ((ax+4.*bx+cx)/6., (ay+4.*by+cy)/6.)) check_continuity(interp, ((ax+bx+4.*cx)/6., (ay+by+4.*cy)/6.)) def test_triinterpcubic_cg_solver(): # Now 3 basic tests of the Sparse CG solver, used for # TriCubicInterpolator with *kind* = 'min_E' # 1) A commonly used test involves a 2d Poisson matrix. def poisson_sparse_matrix(n, m): """ Return the sparse, (n*m, n*m) matrix in coo format resulting from the discretisation of the 2-dimensional Poisson equation according to a finite difference numerical scheme on a uniform (n, m) grid. """ l = m*n rows = np.concatenate([ np.arange(l, dtype=np.int32), np.arange(l-1, dtype=np.int32), np.arange(1, l, dtype=np.int32), np.arange(l-n, dtype=np.int32), np.arange(n, l, dtype=np.int32)]) cols = np.concatenate([ np.arange(l, dtype=np.int32), np.arange(1, l, dtype=np.int32), np.arange(l-1, dtype=np.int32), np.arange(n, l, dtype=np.int32), np.arange(l-n, dtype=np.int32)]) vals = np.concatenate([ 4*np.ones(l, dtype=np.float64), -np.ones(l-1, dtype=np.float64), -np.ones(l-1, dtype=np.float64), -np.ones(l-n, dtype=np.float64), -np.ones(l-n, dtype=np.float64)]) # In fact +1 and -1 diags have some zeros vals[l:2*l-1][m-1::m] = 0. vals[2*l-1:3*l-2][m-1::m] = 0. return vals, rows, cols, (n*m, n*m) # Instantiating a sparse Poisson matrix of size 48 x 48: (n, m) = (12, 4) mat = mtri.triinterpolate._Sparse_Matrix_coo(*poisson_sparse_matrix(n, m)) mat.compress_csc() mat_dense = mat.to_dense() # Testing a sparse solve for all 48 basis vector for itest in range(n*m): b = np.zeros(n*m, dtype=np.float64) b[itest] = 1. x, _ = mtri.triinterpolate._cg(A=mat, b=b, x0=np.zeros(n*m), tol=1.e-10) assert_array_almost_equal(np.dot(mat_dense, x), b) # 2) Same matrix with inserting 2 rows - cols with null diag terms # (but still linked with the rest of the matrix by extra-diag terms) (i_zero, j_zero) = (12, 49) vals, rows, cols, _ = poisson_sparse_matrix(n, m) rows = rows + 1*(rows >= i_zero) + 1*(rows >= j_zero) cols = cols + 1*(cols >= i_zero) + 1*(cols >= j_zero) # adding extra-diag terms rows = np.concatenate([rows, [i_zero, i_zero-1, j_zero, j_zero-1]]) cols = np.concatenate([cols, [i_zero-1, i_zero, j_zero-1, j_zero]]) vals = np.concatenate([vals, [1., 1., 1., 1.]]) mat = mtri.triinterpolate._Sparse_Matrix_coo(vals, rows, cols, (n*m + 2, n*m + 2)) mat.compress_csc() mat_dense = mat.to_dense() # Testing a sparse solve for all 50 basis vec for itest in range(n*m + 2): b = np.zeros(n*m + 2, dtype=np.float64) b[itest] = 1. x, _ = mtri.triinterpolate._cg(A=mat, b=b, x0=np.ones(n*m + 2), tol=1.e-10) assert_array_almost_equal(np.dot(mat_dense, x), b) # 3) Now a simple test that summation of duplicate (i.e. with same rows, # same cols) entries occurs when compressed. vals = np.ones(17, dtype=np.float64) rows = np.array([0, 1, 2, 0, 0, 1, 1, 2, 2, 2, 2, 2, 1, 1, 1, 1, 1], dtype=np.int32) cols = np.array([0, 1, 2, 1, 1, 0, 0, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2], dtype=np.int32) dim = (3, 3) mat = mtri.triinterpolate._Sparse_Matrix_coo(vals, rows, cols, dim) mat.compress_csc() mat_dense = mat.to_dense() assert_array_almost_equal(mat_dense, np.array([ [1., 2., 0.], [2., 1., 5.], [0., 5., 1.]], dtype=np.float64)) def test_triinterpcubic_geom_weights(): # Tests to check computation of weights for _DOF_estimator_geom: # The weight sum per triangle can be 1. (in case all angles < 90 degrees) # or (2*w_i) where w_i = 1-alpha_i/np.pi is the weight of apex i; alpha_i # is the apex angle > 90 degrees. (ax, ay) = (0., 1.687) x = np.array([ax, 0.5*ax, 0., 1.]) y = np.array([ay, -ay, 0., 0.]) z = np.zeros(4, dtype=np.float64) triangles = [[0, 2, 3], [1, 3, 2]] sum_w = np.zeros([4, 2]) # 4 possibilities; 2 triangles for theta in np.linspace(0., 2*np.pi, 14): # rotating the figure... x_rot = np.cos(theta)*x + np.sin(theta)*y y_rot = -np.sin(theta)*x + np.cos(theta)*y triang = mtri.Triangulation(x_rot, y_rot, triangles) cubic_geom = mtri.CubicTriInterpolator(triang, z, kind='geom') dof_estimator = mtri.triinterpolate._DOF_estimator_geom(cubic_geom) weights = dof_estimator.compute_geom_weights() # Testing for the 4 possibilities... sum_w[0, :] = np.sum(weights, 1) - 1 for itri in range(3): sum_w[itri+1, :] = np.sum(weights, 1) - 2*weights[:, itri] assert_array_almost_equal(np.min(np.abs(sum_w), axis=0), np.array([0., 0.], dtype=np.float64)) def test_triinterp_colinear(): # Tests interpolating inside a triangulation with horizontal colinear # points (refer also to the tests :func:`test_trifinder` ). # # These are not valid triangulations, but we try to deal with the # simplest violations (i. e. those handled by default TriFinder). # # Note that the LinearTriInterpolator and the CubicTriInterpolator with # kind='min_E' or 'geom' still pass a linear patch test. # We also test interpolation inside a flat triangle, by forcing # *tri_index* in a call to :meth:`_interpolate_multikeys`. # If +ve, triangulation is OK, if -ve triangulation invalid, # if zero have colinear points but should pass tests anyway. delta = 0. x0 = np.array([1.5, 0, 1, 2, 3, 1.5, 1.5]) y0 = np.array([-1, 0, 0, 0, 0, delta, 1]) # We test different affine transformations of the initial figure; to # avoid issues related to round-off errors we only use integer # coefficients (otherwise the Triangulation might become invalid even with # delta == 0). transformations = [[1, 0], [0, 1], [1, 1], [1, 2], [-2, -1], [-2, 1]] for transformation in transformations: x_rot = transformation[0]*x0 + transformation[1]*y0 y_rot = -transformation[1]*x0 + transformation[0]*y0 (x, y) = (x_rot, y_rot) z = 1.23*x - 4.79*y triangles = [[0, 2, 1], [0, 3, 2], [0, 4, 3], [1, 2, 5], [2, 3, 5], [3, 4, 5], [1, 5, 6], [4, 6, 5]] triang = mtri.Triangulation(x, y, triangles) xs = np.linspace(np.min(triang.x), np.max(triang.x), 20) ys = np.linspace(np.min(triang.y), np.max(triang.y), 20) xs, ys = np.meshgrid(xs, ys) xs = xs.ravel() ys = ys.ravel() mask_out = (triang.get_trifinder()(xs, ys) == -1) zs_target = np.ma.array(1.23*xs - 4.79*ys, mask=mask_out) linear_interp = mtri.LinearTriInterpolator(triang, z) cubic_min_E = mtri.CubicTriInterpolator(triang, z) cubic_geom = mtri.CubicTriInterpolator(triang, z, kind='geom') for interp in (linear_interp, cubic_min_E, cubic_geom): zs = interp(xs, ys) assert_array_almost_equal(zs_target, zs) # Testing interpolation inside the flat triangle number 4: [2, 3, 5] # by imposing *tri_index* in a call to :meth:`_interpolate_multikeys` itri = 4 pt1 = triang.triangles[itri, 0] pt2 = triang.triangles[itri, 1] xs = np.linspace(triang.x[pt1], triang.x[pt2], 10) ys = np.linspace(triang.y[pt1], triang.y[pt2], 10) zs_target = 1.23*xs - 4.79*ys for interp in (linear_interp, cubic_min_E, cubic_geom): zs, = interp._interpolate_multikeys( xs, ys, tri_index=itri*np.ones(10, dtype=np.int32)) assert_array_almost_equal(zs_target, zs) def test_triinterp_transformations(): # 1) Testing that the interpolation scheme is invariant by rotation of the # whole figure. # Note: This test is non-trivial for a CubicTriInterpolator with # kind='min_E'. It does fail for a non-isotropic stiffness matrix E of # :class:`_ReducedHCT_Element` (tested with E=np.diag([1., 1., 1.])), and # provides a good test for :meth:`get_Kff_and_Ff`of the same class. # # 2) Also testing that the interpolation scheme is invariant by expansion # of the whole figure along one axis. n_angles = 20 n_radii = 10 min_radius = 0.15 def z(x, y): r1 = np.hypot(0.5 - x, 0.5 - y) theta1 = np.arctan2(0.5 - x, 0.5 - y) r2 = np.hypot(-x - 0.2, -y - 0.2) theta2 = np.arctan2(-x - 0.2, -y - 0.2) z = -(2*(np.exp((r1/10)**2)-1)*30. * np.cos(7.*theta1) + (np.exp((r2/10)**2)-1)*30. * np.cos(11.*theta2) + 0.7*(x**2 + y**2)) return (np.max(z)-z)/(np.max(z)-np.min(z)) # First create the x and y coordinates of the points. radii = np.linspace(min_radius, 0.95, n_radii) angles = np.linspace(0 + n_angles, 2*np.pi + n_angles, n_angles, endpoint=False) angles = np.repeat(angles[..., np.newaxis], n_radii, axis=1) angles[:, 1::2] += np.pi/n_angles x0 = (radii*np.cos(angles)).flatten() y0 = (radii*np.sin(angles)).flatten() triang0 = mtri.Triangulation(x0, y0) # Delaunay triangulation z0 = z(x0, y0) # Then create the test points xs0 = np.linspace(-1., 1., 23) ys0 = np.linspace(-1., 1., 23) xs0, ys0 = np.meshgrid(xs0, ys0) xs0 = xs0.ravel() ys0 = ys0.ravel() interp_z0 = {} for i_angle in range(2): # Rotating everything theta = 2*np.pi / n_angles * i_angle x = np.cos(theta)*x0 + np.sin(theta)*y0 y = -np.sin(theta)*x0 + np.cos(theta)*y0 xs = np.cos(theta)*xs0 + np.sin(theta)*ys0 ys = -np.sin(theta)*xs0 + np.cos(theta)*ys0 triang = mtri.Triangulation(x, y, triang0.triangles) linear_interp = mtri.LinearTriInterpolator(triang, z0) cubic_min_E = mtri.CubicTriInterpolator(triang, z0) cubic_geom = mtri.CubicTriInterpolator(triang, z0, kind='geom') dic_interp = {'lin': linear_interp, 'min_E': cubic_min_E, 'geom': cubic_geom} # Testing that the interpolation is invariant by rotation... for interp_key in ['lin', 'min_E', 'geom']: interp = dic_interp[interp_key] if i_angle == 0: interp_z0[interp_key] = interp(xs0, ys0) # storage else: interpz = interp(xs, ys) matest.assert_array_almost_equal(interpz, interp_z0[interp_key]) scale_factor = 987654.3210 for scaled_axis in ('x', 'y'): # Scaling everything (expansion along scaled_axis) if scaled_axis == 'x': x = scale_factor * x0 y = y0 xs = scale_factor * xs0 ys = ys0 else: x = x0 y = scale_factor * y0 xs = xs0 ys = scale_factor * ys0 triang = mtri.Triangulation(x, y, triang0.triangles) linear_interp = mtri.LinearTriInterpolator(triang, z0) cubic_min_E = mtri.CubicTriInterpolator(triang, z0) cubic_geom = mtri.CubicTriInterpolator(triang, z0, kind='geom') dic_interp = {'lin': linear_interp, 'min_E': cubic_min_E, 'geom': cubic_geom} # Test that the interpolation is invariant by expansion along 1 axis... for interp_key in ['lin', 'min_E', 'geom']: interpz = dic_interp[interp_key](xs, ys) matest.assert_array_almost_equal(interpz, interp_z0[interp_key]) @image_comparison(['tri_smooth_contouring.png'], remove_text=True, tol=0.07) def test_tri_smooth_contouring(): # Image comparison based on example tricontour_smooth_user. n_angles = 20 n_radii = 10 min_radius = 0.15 def z(x, y): r1 = np.hypot(0.5 - x, 0.5 - y) theta1 = np.arctan2(0.5 - x, 0.5 - y) r2 = np.hypot(-x - 0.2, -y - 0.2) theta2 = np.arctan2(-x - 0.2, -y - 0.2) z = -(2*(np.exp((r1/10)**2)-1)*30. * np.cos(7.*theta1) + (np.exp((r2/10)**2)-1)*30. * np.cos(11.*theta2) + 0.7*(x**2 + y**2)) return (np.max(z)-z)/(np.max(z)-np.min(z)) # First create the x and y coordinates of the points. radii = np.linspace(min_radius, 0.95, n_radii) angles = np.linspace(0 + n_angles, 2*np.pi + n_angles, n_angles, endpoint=False) angles = np.repeat(angles[..., np.newaxis], n_radii, axis=1) angles[:, 1::2] += np.pi/n_angles x0 = (radii*np.cos(angles)).flatten() y0 = (radii*np.sin(angles)).flatten() triang0 = mtri.Triangulation(x0, y0) # Delaunay triangulation z0 = z(x0, y0) triang0.set_mask(np.hypot(x0[triang0.triangles].mean(axis=1), y0[triang0.triangles].mean(axis=1)) < min_radius) # Then the plot refiner = mtri.UniformTriRefiner(triang0) tri_refi, z_test_refi = refiner.refine_field(z0, subdiv=4) levels = np.arange(0., 1., 0.025) plt.triplot(triang0, lw=0.5, color='0.5') plt.tricontour(tri_refi, z_test_refi, levels=levels, colors="black") @image_comparison(['tri_smooth_gradient.png'], remove_text=True, tol=0.092) def test_tri_smooth_gradient(): # Image comparison based on example trigradient_demo. def dipole_potential(x, y): """An electric dipole potential V.""" r_sq = x**2 + y**2 theta = np.arctan2(y, x) z = np.cos(theta)/r_sq return (np.max(z)-z) / (np.max(z)-np.min(z)) # Creating a Triangulation n_angles = 30 n_radii = 10 min_radius = 0.2 radii = np.linspace(min_radius, 0.95, n_radii) angles = np.linspace(0, 2*np.pi, n_angles, endpoint=False) angles = np.repeat(angles[..., np.newaxis], n_radii, axis=1) angles[:, 1::2] += np.pi/n_angles x = (radii*np.cos(angles)).flatten() y = (radii*np.sin(angles)).flatten() V = dipole_potential(x, y) triang = mtri.Triangulation(x, y) triang.set_mask(np.hypot(x[triang.triangles].mean(axis=1), y[triang.triangles].mean(axis=1)) < min_radius) # Refine data - interpolates the electrical potential V refiner = mtri.UniformTriRefiner(triang) tri_refi, z_test_refi = refiner.refine_field(V, subdiv=3) # Computes the electrical field (Ex, Ey) as gradient of -V tci = mtri.CubicTriInterpolator(triang, -V) Ex, Ey = tci.gradient(triang.x, triang.y) E_norm = np.hypot(Ex, Ey) # Plot the triangulation, the potential iso-contours and the vector field plt.figure() plt.gca().set_aspect('equal') plt.triplot(triang, color='0.8') levels = np.arange(0., 1., 0.01) cmap = cm.get_cmap(name='hot', lut=None) plt.tricontour(tri_refi, z_test_refi, levels=levels, cmap=cmap, linewidths=[2.0, 1.0, 1.0, 1.0]) # Plots direction of the electrical vector field plt.quiver(triang.x, triang.y, Ex/E_norm, Ey/E_norm, units='xy', scale=10., zorder=3, color='blue', width=0.007, headwidth=3., headlength=4.) # We are leaving ax.use_sticky_margins as True, so the # view limits are the contour data limits. def test_tritools(): # Tests TriAnalyzer.scale_factors on masked triangulation # Tests circle_ratios on equilateral and right-angled triangle. x = np.array([0., 1., 0.5, 0., 2.]) y = np.array([0., 0., 0.5*np.sqrt(3.), -1., 1.]) triangles = np.array([[0, 1, 2], [0, 1, 3], [1, 2, 4]], dtype=np.int32) mask = np.array([False, False, True], dtype=bool) triang = mtri.Triangulation(x, y, triangles, mask=mask) analyser = mtri.TriAnalyzer(triang) assert_array_almost_equal(analyser.scale_factors, np.array([1., 1./(1.+0.5*np.sqrt(3.))])) assert_array_almost_equal( analyser.circle_ratios(rescale=False), np.ma.masked_array([0.5, 1./(1.+np.sqrt(2.)), np.nan], mask)) # Tests circle ratio of a flat triangle x = np.array([0., 1., 2.]) y = np.array([1., 1.+3., 1.+6.]) triangles = np.array([[0, 1, 2]], dtype=np.int32) triang = mtri.Triangulation(x, y, triangles) analyser = mtri.TriAnalyzer(triang) assert_array_almost_equal(analyser.circle_ratios(), np.array([0.])) # Tests TriAnalyzer.get_flat_tri_mask # Creates a triangulation of [-1, 1] x [-1, 1] with contiguous groups of # 'flat' triangles at the 4 corners and at the center. Checks that only # those at the borders are eliminated by TriAnalyzer.get_flat_tri_mask n = 9 def power(x, a): return np.abs(x)**a*np.sign(x) x = np.linspace(-1., 1., n+1) x, y = np.meshgrid(power(x, 2.), power(x, 0.25)) x = x.ravel() y = y.ravel() triang = mtri.Triangulation(x, y, triangles=meshgrid_triangles(n+1)) analyser = mtri.TriAnalyzer(triang) mask_flat = analyser.get_flat_tri_mask(0.2) verif_mask = np.zeros(162, dtype=bool) corners_index = [0, 1, 2, 3, 14, 15, 16, 17, 18, 19, 34, 35, 126, 127, 142, 143, 144, 145, 146, 147, 158, 159, 160, 161] verif_mask[corners_index] = True assert_array_equal(mask_flat, verif_mask) # Now including a hole (masked triangle) at the center. The center also # shall be eliminated by get_flat_tri_mask. mask = np.zeros(162, dtype=bool) mask[80] = True triang.set_mask(mask) mask_flat = analyser.get_flat_tri_mask(0.2) center_index = [44, 45, 62, 63, 78, 79, 80, 81, 82, 83, 98, 99, 116, 117] verif_mask[center_index] = True assert_array_equal(mask_flat, verif_mask) def test_trirefine(): # Testing subdiv=2 refinement n = 3 subdiv = 2 x = np.linspace(-1., 1., n+1) x, y = np.meshgrid(x, x) x = x.ravel() y = y.ravel() mask = np.zeros(2*n**2, dtype=bool) mask[n**2:] = True triang = mtri.Triangulation(x, y, triangles=meshgrid_triangles(n+1), mask=mask) refiner = mtri.UniformTriRefiner(triang) refi_triang = refiner.refine_triangulation(subdiv=subdiv) x_refi = refi_triang.x y_refi = refi_triang.y n_refi = n * subdiv**2 x_verif = np.linspace(-1., 1., n_refi+1) x_verif, y_verif = np.meshgrid(x_verif, x_verif) x_verif = x_verif.ravel() y_verif = y_verif.ravel() ind1d = np.in1d(np.around(x_verif*(2.5+y_verif), 8), np.around(x_refi*(2.5+y_refi), 8)) assert_array_equal(ind1d, True) # Testing the mask of the refined triangulation refi_mask = refi_triang.mask refi_tri_barycenter_x = np.sum(refi_triang.x[refi_triang.triangles], axis=1) / 3. refi_tri_barycenter_y = np.sum(refi_triang.y[refi_triang.triangles], axis=1) / 3. tri_finder = triang.get_trifinder() refi_tri_indices = tri_finder(refi_tri_barycenter_x, refi_tri_barycenter_y) refi_tri_mask = triang.mask[refi_tri_indices] assert_array_equal(refi_mask, refi_tri_mask) # Testing that the numbering of triangles does not change the # interpolation result. x = np.asarray([0.0, 1.0, 0.0, 1.0]) y = np.asarray([0.0, 0.0, 1.0, 1.0]) triang = [mtri.Triangulation(x, y, [[0, 1, 3], [3, 2, 0]]), mtri.Triangulation(x, y, [[0, 1, 3], [2, 0, 3]])] z = np.hypot(x - 0.3, y - 0.4) # Refining the 2 triangulations and reordering the points xyz_data = [] for i in range(2): refiner = mtri.UniformTriRefiner(triang[i]) refined_triang, refined_z = refiner.refine_field(z, subdiv=1) xyz = np.dstack((refined_triang.x, refined_triang.y, refined_z))[0] xyz = xyz[np.lexsort((xyz[:, 1], xyz[:, 0]))] xyz_data += [xyz] assert_array_almost_equal(xyz_data[0], xyz_data[1]) def meshgrid_triangles(n): """ Return (2*(N-1)**2, 3) array of triangles to mesh (N, N)-point np.meshgrid. """ tri = [] for i in range(n-1): for j in range(n-1): a = i + j*(n) b = (i+1) + j*n c = i + (j+1)*n d = (i+1) + (j+1)*n tri += [[a, b, d], [a, d, c]] return np.array(tri, dtype=np.int32) def test_triplot_return(): # Check that triplot returns the artists it adds from matplotlib.figure import Figure ax = Figure().add_axes([0.1, 0.1, 0.7, 0.7]) triang = mtri.Triangulation( [0.0, 1.0, 0.0, 1.0], [0.0, 0.0, 1.0, 1.0], triangles=[[0, 1, 3], [3, 2, 0]]) assert ax.triplot(triang, "b-") is not None, \ 'triplot should return the artist it adds' def test_trirefiner_fortran_contiguous_triangles(): # github issue 4180. Test requires two arrays of triangles that are # identical except that one is C-contiguous and one is fortran-contiguous. triangles1 = np.array([[2, 0, 3], [2, 1, 0]]) assert not np.isfortran(triangles1) triangles2 = np.array(triangles1, copy=True, order='F') assert np.isfortran(triangles2) x = np.array([0.39, 0.59, 0.43, 0.32]) y = np.array([33.99, 34.01, 34.19, 34.18]) triang1 = mtri.Triangulation(x, y, triangles1) triang2 = mtri.Triangulation(x, y, triangles2) refiner1 = mtri.UniformTriRefiner(triang1) refiner2 = mtri.UniformTriRefiner(triang2) fine_triang1 = refiner1.refine_triangulation(subdiv=1) fine_triang2 = refiner2.refine_triangulation(subdiv=1) assert_array_equal(fine_triang1.triangles, fine_triang2.triangles) def test_qhull_triangle_orientation(): # github issue 4437. xi = np.linspace(-2, 2, 100) x, y = map(np.ravel, np.meshgrid(xi, xi)) w = (x > y - 1) & (x < -1.95) & (y > -1.2) x, y = x[w], y[w] theta = np.radians(25) x1 = x*np.cos(theta) - y*np.sin(theta) y1 = x*np.sin(theta) + y*np.cos(theta) # Calculate Delaunay triangulation using Qhull. triang = mtri.Triangulation(x1, y1) # Neighbors returned by Qhull. qhull_neighbors = triang.neighbors # Obtain neighbors using own C++ calculation. triang._neighbors = None own_neighbors = triang.neighbors assert_array_equal(qhull_neighbors, own_neighbors) def test_trianalyzer_mismatched_indices(): # github issue 4999. x = np.array([0., 1., 0.5, 0., 2.]) y = np.array([0., 0., 0.5*np.sqrt(3.), -1., 1.]) triangles = np.array([[0, 1, 2], [0, 1, 3], [1, 2, 4]], dtype=np.int32) mask = np.array([False, False, True], dtype=bool) triang = mtri.Triangulation(x, y, triangles, mask=mask) analyser = mtri.TriAnalyzer(triang) # numpy >= 1.10 raises a VisibleDeprecationWarning in the following line # prior to the fix. analyser._get_compressed_triangulation() def test_tricontourf_decreasing_levels(): # github issue 5477. x = [0.0, 1.0, 1.0] y = [0.0, 0.0, 1.0] z = [0.2, 0.4, 0.6] plt.figure() with pytest.raises(ValueError): plt.tricontourf(x, y, z, [1.0, 0.0]) def test_internal_cpp_api(): # Following github issue 8197. import matplotlib._tri as _tri # C++ Triangulation. with pytest.raises(TypeError) as excinfo: triang = _tri.Triangulation() excinfo.match(r'function takes exactly 7 arguments \(0 given\)') with pytest.raises(ValueError) as excinfo: triang = _tri.Triangulation([], [1], [[]], None, None, None, False) excinfo.match(r'x and y must be 1D arrays of the same length') x = [0, 1, 1] y = [0, 0, 1] with pytest.raises(ValueError) as excinfo: triang = _tri.Triangulation(x, y, [[0, 1]], None, None, None, False) excinfo.match(r'triangles must be a 2D array of shape \(\?,3\)') tris = [[0, 1, 2]] with pytest.raises(ValueError) as excinfo: triang = _tri.Triangulation(x, y, tris, [0, 1], None, None, False) excinfo.match(r'mask must be a 1D array with the same length as the ' + r'triangles array') with pytest.raises(ValueError) as excinfo: triang = _tri.Triangulation(x, y, tris, None, [[1]], None, False) excinfo.match(r'edges must be a 2D array with shape \(\?,2\)') with pytest.raises(ValueError) as excinfo: triang = _tri.Triangulation(x, y, tris, None, None, [[-1]], False) excinfo.match(r'neighbors must be a 2D array with the same shape as the ' + r'triangles array') triang = _tri.Triangulation(x, y, tris, None, None, None, False) with pytest.raises(ValueError) as excinfo: triang.calculate_plane_coefficients([]) excinfo.match(r'z array must have same length as triangulation x and y ' + r'arrays') with pytest.raises(ValueError) as excinfo: triang.set_mask([0, 1]) excinfo.match(r'mask must be a 1D array with the same length as the ' + r'triangles array') # C++ TriContourGenerator. with pytest.raises(TypeError) as excinfo: tcg = _tri.TriContourGenerator() excinfo.match(r'function takes exactly 2 arguments \(0 given\)') with pytest.raises(ValueError) as excinfo: tcg = _tri.TriContourGenerator(triang, [1]) excinfo.match(r'z must be a 1D array with the same length as the x and ' + r'y arrays') z = [0, 1, 2] tcg = _tri.TriContourGenerator(triang, z) with pytest.raises(ValueError) as excinfo: tcg.create_filled_contour(1, 0) excinfo.match(r'filled contour levels must be increasing') # C++ TrapezoidMapTriFinder. with pytest.raises(TypeError) as excinfo: trifinder = _tri.TrapezoidMapTriFinder() excinfo.match(r'function takes exactly 1 argument \(0 given\)') trifinder = _tri.TrapezoidMapTriFinder(triang) with pytest.raises(ValueError) as excinfo: trifinder.find_many([0], [0, 1]) excinfo.match(r'x and y must be array-like with same shape') def test_qhull_large_offset(): # github issue 8682. x = np.asarray([0, 1, 0, 1, 0.5]) y = np.asarray([0, 0, 1, 1, 0.5]) offset = 1e10 triang = mtri.Triangulation(x, y) triang_offset = mtri.Triangulation(x + offset, y + offset) assert len(triang.triangles) == len(triang_offset.triangles) def test_tricontour_non_finite_z(): # github issue 10167. x = [0, 1, 0, 1] y = [0, 0, 1, 1] triang = mtri.Triangulation(x, y) plt.figure() with pytest.raises(ValueError, match='z array must not contain non-finite ' 'values within the triangulation'): plt.tricontourf(triang, [0, 1, 2, np.inf]) with pytest.raises(ValueError, match='z array must not contain non-finite ' 'values within the triangulation'): plt.tricontourf(triang, [0, 1, 2, -np.inf]) with pytest.raises(ValueError, match='z array must not contain non-finite ' 'values within the triangulation'): plt.tricontourf(triang, [0, 1, 2, np.nan]) with pytest.raises(ValueError, match='z must not contain masked points ' 'within the triangulation'): plt.tricontourf(triang, np.ma.array([0, 1, 2, 3], mask=[1, 0, 0, 0]))