!The DOE Prototype Building Models were developed by Pacific Northwest National Laboratory (PNNL), under contract with the U.S. !Department of Energy (DOE). These building models were derived from DOE's Commercial Reference Building Models with modifications !based on input from the ASHRAE Standard 90.1 committee, the Advanced Energy Design Guide series, and building industry experts. The !prototypes models were developed to quantify energy saving impacts from newly published editions of ASHRAE Standard 90.1, 189.1, IECC, !and other energy codes and standards. The basic building descriptions can be found in the Scorecards posted at www.energycodes.gov !website. The recommended citation of the prototype models is ! !DOE and PNNL. 2020. Commercial Prototype Building Models, Richland, WA, Pacific Northwest National Laboratory. Available at https://www.energycodes.gov/development/commercial/prototype_models. ! !Detailed descriptions of the prototype model development and addenda modeling strategies can be found in the following reports: !DOE, 2020. Preliminary Energy Savings Analysis: ANSI/ASHRAE/IES Standard 90.1-2019. Report prepared by Zhang, J., M. Rosenberg, J. !Lerond, Y. Xie, Nambia, C., Y. Chen, R. Hart, M. Halverson, D. Maddox, and S. Goel, Richland, WA, Pacific Northwest National Laboratory. ! !Zhang, J., Y. Chen, Y. Xie, M. Rosenberg, R. Hart. Energy and Energy Cost Savings Analysis of the 2018 IECC for Commercial Buildings. !2018. PNNL-28125. Richland, WA: Pacific Northwest National Laboratory. ! !DOE. 2017. Energy Savings Analysis: ANSI/ASHRAE/IES Standard 90.1-2016. Prepared by Athalye, R.A, M.A. Halverson, M.I. Rosenberg, B. Liu, !J. Zhang, R. Hart, V.V. Mendon, S. Goel, Y. Chen, Y. Xie, and M. Zhao, Richland, WA, Pacific Northwest National Laboratory. https://www.energycodes.gov/sites/default/files/documents/02202018_Standard_90.1-2016_Determination_TSD.pdf. ! !Zhang, J., Y. Xie, R.A. Athalye, J. Zhuge, M. Rosenberg, R. Hart, and B. Liu. Energy and Energy Cost Savings Analysis of the 2015 IECC !for Commercial Buildings. 2015. PNNL-24269 Rev. 1. Richland, WA: Pacific Northwest National !Laboratory. https://www.energycodes.gov/sites/default/files/documents/2015_IECC_Commercial_Analysis.pdf. ! !Halverson M.A., M.I. Rosenberg, W. Wang, J. Zhang, V.V. Mendon, R.A. Athalye, Y. Xie, R. Hart, S. Goel, 2014. ANSI/ASHRAE/IES Standard !90.1-2013 Determination of Energy Savings: Quantitative Analysis, PNNL-23479. Richland, WA: Pacific Northwest National Laboratory. https://www.energycodes.gov/sites/default/files/documents/901-2013_finalCommercialDeterminationQuantitativeAnalysis_TSD_0.pdf. ! !Goel S., R.A. Athalye, W. Wang, J. Zhang, M.I. Rosenberg, Y. Xie, and R. Hart, et al. 2014. Enhancements to ASHRAE Standard 90.1 !Prototype Building Models. PNNL-23269. Richland, WA: Pacific Northwest National Laboratory. https://www.pnnl.gov/main/publications/external/technical_reports/PNNL-23269.pdf. ! !Zhang J., R.A. Athalye, R. Hart, M.I. Rosenberg, Y. Xie, S. Goel, and V.V. Mendon, et al. 2013. Energy and Energy Cost Savings Analysis !of the IECC for Commercial Buildings. PNNL-22760. Richland, WA: Pacific Northwest National Laboratory. http://www.pnnl.gov/main/publications/external/technical_reports/PNNL-22760.pdf. ! !Thornton B.A., M.I. Rosenberg, E.E. Richman, W. Wang, Y. Xie, J. Zhang, H. Cho, VV Mendon, R.A. Athalye, and B. Liu. 2011. Achieving !the 30% Goal: Energy and Cost Savings Analysis of ASHRAE Standard 90.1-2010. PNNL-20405. Richland, WA: Pacific Northwest National !Laboratory. https://www.energycodes.gov/sites/default/files/documents/BECP_Energy_Cost_Savings_STD2010_May2011_v00.pdf. ! ! ! WeatherFile: USA_MN_Rochester.Intl.AP.726440_TMY3.epw ! BEGIN ECONOMIZER MAP ! Economizer Name, DX COIL Name ! PACU_VAV_bot_OA_Controller, PACU_VAV_bot_CoolC DXCoil ! PACU_VAV_mid_OA_Controller, PACU_VAV_mid_CoolC DXCoil ! PACU_VAV_top_OA_Controller, PACU_VAV_top_CoolC DXCoil ! END ECONOMIZER MAP ! GPARM parameters as input: ! Case = ASHRAE901_OfficeMedium_STD2019_Rochester ! SelectedCase = ! annual_run = yes ! slab_gtp = National_OfficeMedium_ASHRAE901_STD2016_Zone6A_nonres_MN-Rochester-MN.gtp ! basement_tempt = OfficeMedium_STD2007_Burlington_bsmt.idf ! avg_oa_tempt_ip = 43.475 ! maxdiff_oa_tempt_ip = 60.3 ! ext_wall_type = SteelFramedWall ! nonres_ext_wall_ufactor = 0.278234887 ! roof_type = LightweightRoof ! nonres_roof_ufactor = 0.181704416 ! roof_emissivity = 0.9 ! roof_solar_absorp = 0.7 ! nonres_window = ! economizer = DifferentialDryBulb ! skip_economizer_control = No ! sidelighting_control = yes_AY ! LPD_office = 6.888902667 ! exterior_lights_watts = 0 ! exterior_lights_watts_a = 519.2 ! exterior_lights_watts_b = 375.7 ! avg_oa_tempt = 6.375 ! maxdiff_oa_tempt = 33.5 ! infil = 0.00056896 ! oa_flow_per_area = 0.000431773 ! SAT_reset_switch = Yes ! SAT_reset_T = 15.6 ! door_infil = 0.678659786 ! frac_ofpk = 0.131 ! damper_sched = MinOA_MotorizedDamper_Sched ! economizer_lockout = LockoutWithHeating ! heating_damper_act = Normal ! add_ck_pacu_vav_bot = Yes ! add_ck_pacu_vav_mid = Yes ! add_ck_pacu_vav_top = Yes ! core_bottom_mdp = 0.3 ! perimeter_bot_zn_1_mdp = 0.3 ! perimeter_bot_zn_2_mdp = 0.3 ! perimeter_bot_zn_3_mdp = 0.3 ! perimeter_bot_zn_4_mdp = 0.3 ! core_mid_mdp = 0.3 ! perimeter_mid_zn_1_mdp = 0.3 ! perimeter_mid_zn_2_mdp = 0.3 ! perimeter_mid_zn_3_mdp = 0.3 ! perimeter_mid_zn_4_mdp = 0.3 ! core_top_mdp = 0.3 ! perimeter_top_zn_1_mdp = 0.3 ! perimeter_top_zn_2_mdp = 0.3 ! perimeter_top_zn_3_mdp = 0.3 ! perimeter_top_zn_4_mdp = 0.3 ! pacu_vav_bot_oaf = autosize ! pacu_vav_mid_oaf = autosize ! pacu_vav_top_oaf = autosize ! BLDG_ELEVATORS_LIGHTS_FAN_SCH = ELEV_LIGHT_FAN_SCH_ADD_DF ! BLDG_ELEVATORS_LIGHTS_FAN_POWER = 125 ! BLDG_EQUIP_SCH = BLDG_EQUIP_SCH_ADV ! addendum_cd = 2016AS ! pv_generator = no ! pv_surface_area = 0 ! STD189_overhang = no ! swh_et = 0.808039999 ! swh_ua = 7.561562668 ! ext_lgt_sch = Exterior_Lgt_ALWAYS_ON ! PACU_VAV_bot_ERV = No ! PACU_VAV_mid_ERV = No ! PACU_VAV_top_ERV = No ! LTG_SCH_SET = LTG_SET_STD2013 ! transformer_size = 45000 ! transformer_eff = 0.984 ! PACU_VAV_bot_ERV_power = 736.00175 ! PACU_VAV_mid_ERV_power = 736.00175 ! PACU_VAV_top_ERV_power = 736.00175 ! OA_BASED_OPTIMUM_START_EMS = yes ! OPTIMUM_START_SF_DEPENDENT_EMS = no ! wwr = 0.33 ! pipe_heat_loss = 1886.44 ! skip_EMSprogram = yes ! HtgSetP_Sch_PACU_VAV_bot = HTGSETP_SCH_YES_OPTIMUM ! HtgSetP_Sch_PACU_VAV_mid = HTGSETP_SCH_YES_OPTIMUM ! HtgSetP_Sch_PACU_VAV_top = HTGSETP_SCH_YES_OPTIMUM ! ClgSetP_Sch_PACU_VAV_bot = CLGSETP_SCH_YES_OPTIMUM ! ClgSetP_Sch_PACU_VAV_mid = CLGSETP_SCH_YES_OPTIMUM ! ClgSetP_Sch_PACU_VAV_top = CLGSETP_SCH_YES_OPTIMUM ! Wfile_TMY3 = USA_MN_Rochester.Intl.AP.726440_TMY3.epw ! loadProfile = No ! receptacle_ctrl_occ_reduction_frac = 0.95308699 ! receptacle_ctrl_unocc_reduction_frac = 0.769184602 ! SHW_Pump_Head = 29891 ! CodeName = ASHRAE90.1_STD2019 ! CZ_City_Old = Burlington ! CZ_Label = 6A ! exterior_lights_watts_c = 4341.6 ! Addendum_AH = Yes ! LPD_Ctrl = 0.02 ! con_swingdoor_r = 0.475963827 ! office_standby_mode = Yes ! nonres_window_u_factor = 0.34 ! nonres_window_shgc = 0.38 ! nonresLSG = 1.1 ! AnalysisPurpose = ProgressIndicator ! AnalysisCodeName = ASHRAE901 ! AnalysisCodeYear = 2019 ! AnalysisAmendment = NoneAmend ! AnalysisPrototype = OfficeMedium ! AnalysisScope = National ! AnalysisState = National ! AnalysisClimateZone = 6A ! AnalysisCity = USA_MN_Rochester ! var_Ffactor_IP = 0.51 ! var_Cfactor_IP = 0.092 ! Core_ZN_SWH_flow = 3.57511e-06 ! specify overhang_pf for 1891 codes Version,9.0; !- =========== ALL OBJECTS IN CLASS: BUILDING =========== Building, OfficeMedium, !- Name 0.0000, !- North Axis {deg} City, !- Terrain 0.0400, !- Loads Convergence Tolerance Value 0.2000, !- Temperature Convergence Tolerance Value {deltaC} FullInteriorAndExterior, !- Solar Distribution 25, !- Maximum Number of Warmup Days 6; !- Minimum Number of Warmup Days !- =========== ALL OBJECTS IN CLASS: TIMESTEP IN HOUR =========== Timestep,6; ConvergenceLimits, 1, !- Minimum System Timestep {minutes} 20; !- Maximum HVAC Iterations !- =========== ALL OBJECTS IN CLASS: INSIDE CONVECTION ALGORITHM =========== SurfaceConvectionAlgorithm:Inside,TARP; !- =========== ALL OBJECTS IN CLASS: OUTSIDE CONVECTION ALGORITHM =========== SurfaceConvectionAlgorithm:Outside,TARP; !- =========== ALL OBJECTS IN CLASS: SOLUTION ALGORITHM =========== HeatBalanceAlgorithm,ConductionTransferFunction; !- =========== ALL OBJECTS IN CLASS: SHADOWING CALCULATIONS =========== ShadowCalculation, AverageOverDaysInFrequency, !- Calculation Method 30; !- Calculation Frequency !- =========== ALL OBJECTS IN CLASS: RUN CONTROL =========== SimulationControl, Yes, !- Do Zone Sizing Calculation Yes, !- Do System Sizing Calculation Yes, !- Do Plant Sizing Calculation No, !- Run Simulation for Sizing Periods YES; !- Run Simulation for Weather File Run Periods !- =========== ALL OBJECTS IN CLASS: RUNPERIOD =========== RunPeriod, , !- Name 1, !- Begin Month 1, !- Begin Day of Month , !- Begin Year 12, !- End Month 31, !- End Day of Month , !- End Year Sunday, !- Day of Week for Start Day No, !- Use Weather File Holidays and Special Days No, !- Use Weather File Daylight Saving Period No, !- Apply Weekend Holiday Rule Yes, !- Use Weather File Rain Indicators Yes; !- Use Weather File Snow Indicators !- =========== ALL OBJECTS IN CLASS: SPECIALDAYPERIOD =========== RunPeriodControl:SpecialDays, New Years Day, !- Name January 1, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Veterans Day, !- Name November 11, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Christmas, !- Name December 25, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Independence Day, !- Name July 4, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, MLK Day, !- Name 3rd Monday in January, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Presidents Day, !- Name 3rd Monday in February, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Memorial Day, !- Name Last Monday in May, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Labor Day, !- Name 1st Monday in September, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Columbus Day, !- Name 2nd Monday in October, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Thanksgiving, !- Name 4th Thursday in November,!- Start Date 1, !- Duration {days} Holiday; !- Special Day Type !- =========== ALL OBJECTS IN CLASS: DAYLIGHTSAVINGPERIOD =========== RunPeriodControl:DaylightSavingTime, 2nd Sunday in March, !- Start Date 1st Sunday in November; !- End Date !- =========== ALL OBJECTS IN CLASS: LOCATION =========== ! Site:Location and design-day objects created by: ! ../../_p.bin/ddy2idf /projects/bigsim/weather/EnergyPlus/tmy3.new/all/USA_MN_Rochester.Intl.AP.726440_TMY3.ddy ! Site:Location, Rochester International Arpt_MN_USA Design_Conditions, !- Site:Location Name 43.90, !- Latitude {N+ S-} -92.50, !- Longitude {W- E+} -6.00, !- Time Zone Relative to GMT {GMT+/-} 398.00; !- Elevation {m} SizingPeriod:DesignDay, Rochester International Arpt Ann Htg 99.6% Condns DB, !- Name 1, !- Month 21, !- Day of Month WinterDesignDay,!- Day Type -26.2, !- Maximum Dry-Bulb Temperature {C} 0.0, !- Daily Dry-Bulb Temperature Range {C} DefaultMultipliers, !- Dry-Bulb Temperature Range Modifier Type , !- Dry-Bulb Temperature Range Modifier Schedule Name Wetbulb, !- Humidity Condition Type -26.2, !- Wetbulb at Maximum Dry-Bulb {C} , !- Humidity Indicating Day Schedule Name , !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir} , !- Enthalpy at Maximum Dry-Bulb {J/kg} , !- Daily WetBulb Temperature Range {deltaC} 96634., !- Barometric Pressure {Pa} 5.7, !- Wind Speed {m/s} design conditions vs. traditional 6.71 m/s (15 mph) 310, !- Wind Direction {Degrees; N=0, S=180} No, !- Rain {Yes/No} No, !- Snow on ground {Yes/No} No, !- Daylight Savings Time Indicator ASHRAEClearSky, !- Solar Model Indicator , !- Beam Solar Day Schedule Name , !- Diffuse Solar Day Schedule Name , !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) , !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) 0.00; !- Clearness {0.0 to 1.1} SizingPeriod:DesignDay, Rochester International Arpt Ann Clg .4% Condns DB=>MWB, !- Name 7, !- Month 21, !- Day of Month SummerDesignDay,!- Day Type 31.2, !- Maximum Dry-Bulb Temperature {C} 10.6, !- Daily Dry-Bulb Temperature Range {C} DefaultMultipliers, !- Dry-Bulb Temperature Range Modifier Type , !- Dry-Bulb Temperature Range Modifier Schedule Name Wetbulb, !- Humidity Condition Type 23.1, !- Wetbulb at Maximum Dry-Bulb {C} , !- Humidity Indicating Day Schedule Name , !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir} , !- Enthalpy at Maximum Dry-Bulb {J/kg} , !- Daily WetBulb Temperature Range {deltaC} 96634., !- Barometric Pressure {Pa} 6.7, !- Wind Speed {m/s} design conditions vs. traditional 3.35 m/s (7mph) 200, !- Wind Direction {Degrees; N=0, S=180} No, !- Rain {Yes/No} No, !- Snow on ground {Yes/No} No, !- Daylight Savings Time Indicator ASHRAETau, !- Solar Model Indicator , !- Beam Solar Day Schedule Name , !- Diffuse Solar Day Schedule Name 0.404, !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) 2.226; !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) !- =========== ALL OBJECTS IN CLASS: WATER MAINS TEMPERATURES =========== Site:WaterMainsTemperature, Correlation, !- Calculation Method , !- Temperature Schedule Name 6.375, !- Annual average outdoor air temperature {C} 33.5; !- Maximum difference in monthly average outdoor air temperatures {C} !- =========== ALL OBJECTS IN CLASS: Site:GroundTemperature:FCfactorMethod =========== Site:GroundTemperature:FCfactorMethod, 7.4, !- January Ground Temperature {C} -0.0, !- February Ground Temperature {C} -7.6, !- March Ground Temperature {C} -12.6, !- April Ground Temperature {C} -7.7, !- May Ground Temperature {C} 0.3, !- June Ground Temperature {C} 7.0, !- July Ground Temperature {C} 14.2, !- August Ground Temperature {C} 19.2, !- September Ground Temperature {C} 20.9, !- October Ground Temperature {C} 20.0, !- November Ground Temperature {C} 15.4; !- December Ground Temperature {C} !- =========== ALL OBJECTS IN CLASS: MATERIAL:REGULAR-R =========== Material:NoMass, Opaque Door panel_con, !- Name MediumRough, !- Roughness 0.475963827, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance !- =========== ALL OBJECTS IN CLASS: CONSTRUCTION =========== Construction, Swinging Door_con, !- Name Opaque Door panel_con; !- Outside Layer !- =========== ALL OBJECTS IN CLASS: CONSTRUCTION =========== ! !- =========== ALL OBJECTS IN CLASS: MATERIAL:REGULAR =========== Material, Std Wood 6inch, !- Name MediumSmooth, !- Roughness 0.15, !- Thickness {m} 0.12, !- Conductivity {W/m-K} 540.0000, !- Density {kg/m3} 1210, !- Specific Heat {J/kg-K} 0.9000000, !- Thermal Absorptance 0.7000000, !- Solar Absorptance 0.7000000; !- Visible Absorptance Material, AC02 Acoustic Ceiling, !- Name MediumSmooth, !- Roughness 1.2700000E-02, !- Thickness {m} 5.7000000E-02, !- Conductivity {W/m-K} 288.0000, !- Density {kg/m3} 1339.000, !- Specific Heat {J/kg-K} 0.9000000, !- Thermal Absorptance 0.7000000, !- Solar Absorptance 0.2000000; !- Visible Absorptance Material, F07 25mm stucco, !- Name Smooth, !- Roughness 0.0254, !- Thickness {m} 0.72, !- Conductivity {W/m-K} 1856, !- Density {kg/m3} 840, !- Specific Heat {J/kg-K} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material, F08 Metal surface, !- Name Smooth, !- Roughness 0.0008, !- Thickness {m} 45.28, !- Conductivity {W/m-K} 7824, !- Density {kg/m3} 500; !- Specific Heat {J/kg-K} Material, F08 Metal roof surface, !- Name Smooth, !- Roughness 0.0008, !- Thickness {m} 45.28, !- Conductivity {W/m-K} 7824, !- Density {kg/m3} 500, !- Specific Heat {J/kg-K} 0.9, !- Absorptance:Thermal 0.7; !- Absorptance:Solar Material, F12 Asphalt shingles, !- Name VeryRough, !- Roughness 0.0032, !- Thickness {m} 0.04, !- Conductivity {W/m-K} 1120, !- Density {kg/m3} 1260, !- Specific Heat {J/kg-K} 0.9, !- Absorptance:Thermal 0.7; !- Absorptance:Solar Material, F13 Built-up roofing, !- Name Rough, !- Roughness 0.0095, !- Thickness {m} 0.16, !- Conductivity {W/m-K} 1120, !- Density {kg/m3} 1460, !- Specific Heat {J/kg-K} 0.9, !- Absorptance:Thermal 0.7; !- Absorptance:Solar Material, G01 13mm gypsum board, !- Name Smooth, !- Roughness 0.0127, !- Thickness {m} 0.1600, !- Conductivity {W/m-K} 800.0000, !- Density {kg/m3} 1090.0000, !- Specific Heat {J/kg-K} 0.9000, !- Absorptance:Thermal 0.7000, !- Absorptance:Solar 0.5000; !- Absorptance:Visible Material, G01 16mm gypsum board, !- Name MediumSmooth, !- Roughness 0.0159, !- Thickness {m} 0.16, !- Conductivity {W/m-K} 800, !- Density {kg/m3} 1090; !- Specific Heat {J/kg-K} Material, G02 16mm plywood, !- Name Smooth, !- Roughness 0.0159, !- Thickness {m} 0.12, !- Conductivity {W/m-K} 544, !- Density {kg/m3} 1210; !- Specific Heat {J/kg-K} Material, M14 150mm heavyweight concrete roof, !- Name MediumRough, !- Roughness 0.1524, !- Thickness {m} 2.31, !- Conductivity {W/m-K} 2322, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, 100mm Normalweight concrete wall, !- Name - based on 90.1-2004 Appendix-Table A3-1B MediumRough, !- Roughness 0.1016, !- Thickness {m} 2.31, !- Conductivity {W/m-K} 2322, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, 200mm Normalweight concrete wall, !- Name - based on 90.1-2004 Appendix-Table A3-1B MediumRough, !- Roughness 0.2032, !- Thickness {m} 2.31, !- Conductivity {W/m-K} 2322, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, 100mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B MediumRough, !- Roughness 0.1016, !- Thickness {m} 2.31, !- Conductivity {W/m-K} 2322, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, 150mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B MediumRough, !- Roughness 0.1524, !- Thickness {m} 2.31, !- Conductivity {W/m-K} 2322, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, 200mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B MediumRough, !- Roughness 0.2032, !- Thickness {m} 2.31, !- Conductivity {W/m-K} 2322, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, M10 200mm concrete block wall, !- Name MediumRough, !- Roughness 0.2032, !- Thickness {m} 0.72, !- Conductivity {W/m-K} 800, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, M10 200mm concrete block basement wall, !- Name MediumRough, !- Roughness 0.2032, !- Thickness {m} 1.326, !- Conductivity {W/m-K} 1842, !- Density {kg/m3} 912; !- Specific Heat {J/kg-K} Material:NoMass, CP02 CARPET PAD, !- Name VeryRough, !- Roughness 0.21648, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.8; !- Visible Absorptance Material:NoMass, Air_Wall_Material, !- Name Rough, !- Roughness 0.2079491, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7; !- Solar Absorptance Material:NoMass, Nonres_Roof_Insulation, !- Name MediumSmooth, !- Roughness 5.30668495131472, !- Thermal Resistance {m2-K/W} 0.9, !- Absorptance:Thermal 0.7, !- Absorptance:Solar 0.7; !- Absorptance:Visible Material:NoMass, Res_Roof_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Semiheated_Roof_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Nonres_Exterior_Wall_Insulation, !- Name MediumSmooth, !- Roughness 3.21036415428069, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Res_Exterior_Wall_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Semiheated_Exterior_Wall_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Nonres_Floor_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Res_Floor_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Semiheated_Floor_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Std Opaque Door Panel, !- Name MediumRough, !- Roughness 0.123456790123457, !- (corresponds to default RSI-0.12327 or R-0.7) Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance !- =========== ALL OBJECTS IN CLASS: CONSTRUCTION =========== Construction, InteriorFurnishings, !- Name Std Wood 6inch; !- Outside Layer Construction, Air_Wall, !- Name Air_Wall_Material; !- Outside Layer Construction, DropCeiling, !- Name AC02 Acoustic Ceiling; !- Outside Layer Construction, OpaqueDoor, !- Name Std Opaque Door Panel; !- Outside Layer Construction, AtticRoofDeck, !- Name F12 Asphalt shingles, !- Outside Layer G02 16mm plywood; !- Layer 2 Construction, int_wall, !- Name G01 13mm gypsum board, !- Outside Layer G01 13mm gypsum board; !- Layer 2 Construction, ext_slab_8in_with_carpet,!- Name 200mm Normalweight concrete floor, !- Outside Layer CP02 CARPET PAD; !- Layer 2 Construction, ext_slab_8in, !- Name 200mm Normalweight concrete floor; !- Outside Layer Construction, ext_slab_6in_with_carpet,!- Name 150mm Normalweight concrete floor, !- Outside Layer CP02 CARPET PAD; !- Layer 2 Construction, ext_slab_6in, !- Name 150mm Normalweight concrete floor; !- Outside Layer Construction, int_slab_floor, !- Name 100mm Normalweight concrete floor, !- Outside Layer CP02 CARPET PAD; !- Layer 2 Construction, int_slab_ceiling, !- Name CP02 CARPET PAD, !- Outside Layer 100mm Normalweight concrete floor; !- Layer 2 Construction, basement_wall, !- Name M10 200mm concrete block basement wall; !- Outside Layer Construction, int_wood_floor, !- Name AC02 Acoustic Ceiling, !- Outside Layer G02 16mm plywood, !- Layer 2 CP02 CARPET PAD; !- Layer 3 Construction, ext_soffit_floor, !- Name G02 16mm plywood; !- Outside Layer Construction, nonres_roof, !- Name F13 Built-up roofing, !- Outside Layer Nonres_Roof_Insulation, !- Layer #2 F08 Metal surface; !- Layer #3 Construction, res_roof, !- Name F13 Built-up roofing, !- Outside Layer Res_Roof_Insulation, !- Layer #2 F08 Metal surface; !- Layer #3 Construction, semiheated_roof, !- Name F13 Built-up roofing, !- Outside Layer Semiheated_Roof_Insulation, !- Layer #2 F08 Metal surface; !- Layer #3 Construction, nonres_ext_wall, !- Name F07 25mm stucco, !- Outside Layer G01 16mm gypsum board, !- Layer #2 Nonres_Exterior_Wall_Insulation, !- Layer #3 G01 16mm gypsum board; !- Layer #4 Construction, res_ext_wall, !- Name F07 25mm stucco, !- Outside Layer G01 16mm gypsum board, !- Layer #1 Res_Exterior_Wall_Insulation, !- Layer #2 G01 16mm gypsum board; !- Layer #3 Construction, semiheated_ext_wall, !- Name F07 25mm stucco, !- Outside Layer G01 16mm gypsum board, !- Layer #1 Semiheated_Exterior_Wall_Insulation, !- Layer #2 G01 16mm gypsum board; !- Layer #3 Construction, nonres_floor, !- Name Nonres_Floor_Insulation, !- Outside Layer 100mm Normalweight concrete floor, !- Layer #1 CP02 CARPET PAD; !- Layer #2 Construction, res_floor, !- Name Res_Floor_Insulation, !- Outside Layer 100mm Normalweight concrete floor, !- Layer #1 CP02 CARPET PAD; !- Layer #2 Construction, semiheated_floor, !- Name Semiheated_Floor_Insulation, !- Outside Layer 100mm Normalweight concrete floor, !- Layer #1 CP02 CARPET PAD; !- Layer #2 Construction, nonres_floor_ceiling, !- Name - reverse ordered layers for nonres_floor CP02 CARPET PAD, !- Outside Layer 100mm Normalweight concrete floor, !- Layer #1 Nonres_Floor_Insulation; !- Layer #2 Construction, res_floor_ceiling, !- Name - reverse ordered layers for res_floor CP02 CARPET PAD, !- Outside Layer 100mm Normalweight concrete floor, !- Layer #1 Res_Floor_Insulation; !- Layer #2 Construction, semiheated_floor_ceiling, !- Name - reverse ordered layers for semiheated_floor CP02 CARPET PAD, !- Outside Layer 100mm Normalweight concrete floor, !- Layer #1 Semiheated_Floor_Insulation; !- Layer #2 !- =========== ALL OBJECTS IN CLASS: WINDOWMATERIAL:SIMPLEGLAZINGSYSTEM =========== WindowMaterial:SimpleGlazingSystem, Glazing Layer, !- Name 1.9306084, !- U-Factor {W/m2-K} 0.38, !- Solar Heat Gain Coefficient 0.418; !- Visible Transmittance Construction, Window_U_0.34_SHGC_0.38, !- Name Glazing Layer; !- Outside Layer Construction:FfactorGroundFloor, Perimeter_bot_ZN_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 207.33814098, !- Area 49.911; !- PerimeterExposed Construction:FfactorGroundFloor, Perimeter_bot_ZN_2_Floor_Ffactor, !- Name 0.88281, !- F-Factor 131.26219410000022, !- Area 33.2738; !- PerimeterExposed Construction:FfactorGroundFloor, Perimeter_bot_ZN_3_Floor_Ffactor, !- Name 0.88281, !- F-Factor 207.33814097999993, !- Area 49.911; !- PerimeterExposed Construction:FfactorGroundFloor, Perimeter_bot_ZN_4_Floor_Ffactor, !- Name 0.88281, !- F-Factor 131.25358392, !- Area 33.2738; !- PerimeterExposed Construction:FfactorGroundFloor, Core_bot_ZN_5_Floor_Ffactor, !- Name 0.88281, !- F-Factor 983.5365718200002, !- Area 0; !- PerimeterExposed !- =========== ALL OBJECTS IN CLASS: ZONE =========== Zone, Core_bottom, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 2.7432, !- Ceiling Height {m} autocalculate, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, TopFloor_Plenum, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 1.2192, !- Ceiling Height {m} autocalculate, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm No; !- Part of Total Floor Area Zone, MidFloor_Plenum, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 1.2192, !- Ceiling Height {m} autocalculate, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm No; !- Part of Total Floor Area Zone, FirstFloor_Plenum, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 1.2192, !- Ceiling Height {m} autocalculate, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm No; !- Part of Total Floor Area Zone, Core_mid, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 2.7432, !- Ceiling Height {m} autocalculate, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Core_top, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 2.7432, !- Ceiling Height {m} autocalculate, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Perimeter_top_ZN_3, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 2.7432, !- Ceiling Height {m} autocalculate, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Perimeter_top_ZN_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 2.7432, !- Ceiling Height {m} autocalculate, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Perimeter_top_ZN_1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 2.7432, !- Ceiling Height {m} autocalculate, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Perimeter_top_ZN_4, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 2.7432, !- Ceiling Height {m} autocalculate, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Perimeter_bot_ZN_3, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 2.7432, !- Ceiling Height {m} autocalculate, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Perimeter_bot_ZN_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 2.7432, !- Ceiling Height {m} autocalculate, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Perimeter_bot_ZN_1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 2.7432, !- Ceiling Height {m} autocalculate, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Perimeter_bot_ZN_4, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 2.7432, !- Ceiling Height {m} autocalculate, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Perimeter_mid_ZN_3, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 2.7432, !- Ceiling Height {m} autocalculate, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Perimeter_mid_ZN_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 2.7432, !- Ceiling Height {m} autocalculate, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Perimeter_mid_ZN_1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 2.7432, !- Ceiling Height {m} autocalculate, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area Zone, Perimeter_mid_ZN_4, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 2.7432, !- Ceiling Height {m} autocalculate, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm YES; !- Part of Total Floor Area !- =========== ALL OBJECTS IN CLASS: SURFACEGEOMETRY =========== GlobalGeometryRules, ULC, !- Starting Vertex Position Counterclockwise, !- Vertex Entry Direction Relative; !- Coordinate System !- =========== ALL OBJECTS IN CLASS: SURFACE:HEATTRANSFER =========== BuildingSurface:Detailed, Building_Roof, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name TopFloor_Plenum, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911000,0.000000,11.887200, !- X,Y,Z ==> Vertex 1 {m} 49.911000,33.273800,11.887200, !- X,Y,Z ==> Vertex 2 {m} 0.000000,33.273800,11.887200, !- X,Y,Z ==> Vertex 3 {m} 0.000000,0.000000,11.887200; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_1_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Perimeter_bot_ZN_1, !- Zone Name Zone, !- Outside Boundary Condition FirstFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,0.0000,2.7432, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,2.7432, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,2.7432, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_2_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Perimeter_bot_ZN_2, !- Zone Name Zone, !- Outside Boundary Condition FirstFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,33.2738,2.7432, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,2.7432, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,2.7432, !- X,Y,Z ==> Vertex 3 {m} 49.911,0.0000,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_3_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Perimeter_bot_ZN_3, !- Zone Name Zone, !- Outside Boundary Condition FirstFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,2.7432, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,2.7432, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,2.7432, !- X,Y,Z ==> Vertex 3 {m} 49.911,33.2738,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_4_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Perimeter_bot_ZN_4, !- Zone Name Zone, !- Outside Boundary Condition FirstFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,2.7432, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,2.7432, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,2.7432, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_bot_ZN_5_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Core_bottom, !- Zone Name Zone, !- Outside Boundary Condition FirstFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,28.7006,2.7432, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,2.7432, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,2.7432, !- X,Y,Z ==> Vertex 3 {m} 45.3375,28.7006,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_1_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Perimeter_mid_ZN_1, !- Zone Name Zone, !- Outside Boundary Condition MidFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,0.0000,6.7056, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,6.7056, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,6.7056, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_2_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Perimeter_mid_ZN_2, !- Zone Name Zone, !- Outside Boundary Condition MidFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,33.2738,6.7056, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,6.7056, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,6.7056, !- X,Y,Z ==> Vertex 3 {m} 49.911,0.0000,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_3_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Perimeter_mid_ZN_3, !- Zone Name Zone, !- Outside Boundary Condition MidFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,6.7056, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,6.7056, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,6.7056, !- X,Y,Z ==> Vertex 3 {m} 49.911,33.2738,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_4_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Perimeter_mid_ZN_4, !- Zone Name Zone, !- Outside Boundary Condition MidFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,6.7056, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,6.7056, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,6.7056, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_mid_ZN_5_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Core_mid, !- Zone Name Zone, !- Outside Boundary Condition MidFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,28.7006,6.7056, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,6.7056, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,6.7056, !- X,Y,Z ==> Vertex 3 {m} 45.3375,28.7006,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_1_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Perimeter_top_ZN_1, !- Zone Name Zone, !- Outside Boundary Condition TopFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,10.668, !- X,Y,Z ==> Vertex 1 {m} 49.911,0.0000,10.668, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,10.668, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,10.668; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_2_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Perimeter_top_ZN_2, !- Zone Name Zone, !- Outside Boundary Condition TopFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,0.0000,10.668, !- X,Y,Z ==> Vertex 1 {m} 49.911,33.2738,10.668, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,10.668, !- X,Y,Z ==> Vertex 3 {m} 45.3375,4.5732,10.668; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_3_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Perimeter_top_ZN_3, !- Zone Name Zone, !- Outside Boundary Condition TopFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,33.2738,10.668, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2738,10.668, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,10.668, !- X,Y,Z ==> Vertex 3 {m} 45.3375,28.7006,10.668; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_4_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Perimeter_top_ZN_4, !- Zone Name Zone, !- Outside Boundary Condition TopFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,10.668, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,10.668, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,10.668, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,10.668; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_top_ZN_5_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Core_top, !- Zone Name Zone, !- Outside Boundary Condition TopFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,4.5732,10.668, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,10.668, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,10.668, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,10.668; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_1_Floor,!- Name Floor, !- Surface Type Perimeter_bot_ZN_1_Floor_Ffactor, !- Construction Name Perimeter_bot_ZN_1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m} 49.911,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_2_Floor,!- Name Floor, !- Surface Type Perimeter_bot_ZN_2_Floor_Ffactor, !- Construction Name Perimeter_bot_ZN_2, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,0.0000, !- X,Y,Z ==> Vertex 3 {m} 49.911,33.2738,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_3_Floor,!- Name Floor, !- Surface Type Perimeter_bot_ZN_3_Floor_Ffactor, !- Construction Name Perimeter_bot_ZN_3, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,33.2738,0.0000, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,0.0000, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_4_Floor,!- Name Floor, !- Surface Type Perimeter_bot_ZN_4_Floor_Ffactor, !- Construction Name Perimeter_bot_ZN_4, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,0.0000, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,0.0000, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_bot_ZN_5_Floor, !- Name Floor, !- Surface Type Core_bot_ZN_5_Floor_Ffactor, !- Construction Name Core_bottom, !- Zone Name Adiabatic, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,28.7006,0.0000, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_1_Floor,!- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Perimeter_mid_ZN_1, !- Zone Name Zone, !- Outside Boundary Condition FirstFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,3.9624, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,3.9624, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,3.9624, !- X,Y,Z ==> Vertex 3 {m} 49.911,0.0000,3.9624; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_2_Floor,!- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Perimeter_mid_ZN_2, !- Zone Name Zone, !- Outside Boundary Condition FirstFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,0.0000,3.9624, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,3.9624, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,3.9624, !- X,Y,Z ==> Vertex 3 {m} 49.911,33.2738,3.9624; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_3_Floor,!- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Perimeter_mid_ZN_3, !- Zone Name Zone, !- Outside Boundary Condition FirstFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,33.2738,3.9624, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,3.9624, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,3.9624, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,3.9624; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_4_Floor,!- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Perimeter_mid_ZN_4, !- Zone Name Zone, !- Outside Boundary Condition FirstFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,3.9624, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,3.9624, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,3.9624, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,3.9624; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_mid_ZN_5_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Core_mid, !- Zone Name Zone, !- Outside Boundary Condition FirstFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,28.7006,3.9624, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,3.9624, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,3.9624, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,3.9624; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_1_Floor,!- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Perimeter_top_ZN_1, !- Zone Name Zone, !- Outside Boundary Condition MidFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,7.9248, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,7.9248, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m} 49.911,0.0000,7.9248; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_2_Floor,!- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Perimeter_top_ZN_2, !- Zone Name Zone, !- Outside Boundary Condition MidFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,0.0000,7.9248, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,7.9248, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,7.9248, !- X,Y,Z ==> Vertex 3 {m} 49.911,33.2738,7.9248; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_3_Floor,!- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Perimeter_top_ZN_3, !- Zone Name Zone, !- Outside Boundary Condition MidFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,33.2738,7.9248, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,7.9248, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,7.9248, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,7.9248; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_4_Floor,!- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Perimeter_top_ZN_4, !- Zone Name Zone, !- Outside Boundary Condition MidFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,7.9248, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,7.9248, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,7.9248; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_top_ZN_5_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Core_top, !- Zone Name Zone, !- Outside Boundary Condition MidFloor_Plenum, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,28.7006,7.9248, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,7.9248, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,7.9248; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_1_Wall_South, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Perimeter_bot_ZN_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,2.7432, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 49.911,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 49.911,0.0000,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_1_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Perimeter_bot_ZN_1, !- Zone Name Zone, !- Outside Boundary Condition Perimeter_bot_ZN_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,0.0000,2.7432, !- X,Y,Z ==> Vertex 1 {m} 49.911,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m} 45.3375,4.5732,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_2_Wall_East, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Perimeter_bot_ZN_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,0.0000,2.7432, !- X,Y,Z ==> Vertex 1 {m} 49.911,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 49.911,33.2738,0.0000, !- X,Y,Z ==> Vertex 3 {m} 49.911,33.2738,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_2_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name Perimeter_bot_ZN_2, !- Zone Name Zone, !- Outside Boundary Condition Perimeter_bot_ZN_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,33.2738,2.7432, !- X,Y,Z ==> Vertex 1 {m} 49.911,33.2738,0.0000, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,0.0000, !- X,Y,Z ==> Vertex 3 {m} 45.3375,28.7006,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_3_Wall_North, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Perimeter_bot_ZN_3, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,33.2738,2.7432, !- X,Y,Z ==> Vertex 1 {m} 49.911,33.2738,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,33.2738,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_3_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Perimeter_bot_ZN_3, !- Zone Name Zone, !- Outside Boundary Condition Perimeter_bot_ZN_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,2.7432, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2738,0.0000, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,0.0000, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_4_Wall_West, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Perimeter_bot_ZN_4, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,2.7432, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2738,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_4_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name Perimeter_bot_ZN_4, !- Zone Name Zone, !- Outside Boundary Condition Perimeter_bot_ZN_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,2.7432, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_bot_ZN_5_Wall_South,!- Name Wall, !- Surface Type int_wall, !- Construction Name Core_bottom, !- Zone Name Zone, !- Outside Boundary Condition Perimeter_bot_ZN_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,4.5732,2.7432, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m} 45.3375,4.5732,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_bot_ZN_5_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Core_bottom, !- Zone Name Zone, !- Outside Boundary Condition Perimeter_bot_ZN_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,4.5732,2.7432, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,0.0000, !- X,Y,Z ==> Vertex 3 {m} 45.3375,28.7006,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_bot_ZN_5_Wall_North,!- Name Wall, !- Surface Type int_wall, !- Construction Name Core_bottom, !- Zone Name Zone, !- Outside Boundary Condition Perimeter_bot_ZN_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,28.7006,2.7432, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,0.0000, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,0.0000, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_bot_ZN_5_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Core_bottom, !- Zone Name Zone, !- Outside Boundary Condition Perimeter_bot_ZN_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,28.7006,2.7432, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,0.0000, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_1_Wall_South, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Perimeter_mid_ZN_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,6.7056, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,3.9624, !- X,Y,Z ==> Vertex 2 {m} 49.911,0.0000,3.9624, !- X,Y,Z ==> Vertex 3 {m} 49.911,0.0000,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_1_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Perimeter_mid_ZN_1, !- Zone Name Zone, !- Outside Boundary Condition Perimeter_mid_ZN_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,0.0000,6.7056, !- X,Y,Z ==> Vertex 1 {m} 49.911,0.0000,3.9624, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,3.9624, !- X,Y,Z ==> Vertex 3 {m} 45.3375,4.5732,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_2_Wall_East, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Perimeter_mid_ZN_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,0.0000,6.7056, !- X,Y,Z ==> Vertex 1 {m} 49.911,0.0000,3.9624, !- X,Y,Z ==> Vertex 2 {m} 49.911,33.2738,3.9624, !- X,Y,Z ==> Vertex 3 {m} 49.911,33.2738,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_2_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name Perimeter_mid_ZN_2, !- Zone Name Zone, !- Outside Boundary Condition Perimeter_mid_ZN_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,33.2738,6.7056, !- X,Y,Z ==> Vertex 1 {m} 49.911,33.2738,3.9624, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,3.9624, !- X,Y,Z ==> Vertex 3 {m} 45.3375,28.7006,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_3_Wall_North, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Perimeter_mid_ZN_3, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,33.2738,6.7056, !- X,Y,Z ==> Vertex 1 {m} 49.911,33.2738,3.9624, !- X,Y,Z ==> Vertex 2 {m} 0.0000,33.2738,3.9624, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_3_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Perimeter_mid_ZN_3, !- Zone Name Zone, !- Outside Boundary Condition Perimeter_mid_ZN_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,6.7056, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2738,3.9624, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,3.9624, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_4_Wall_West, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Perimeter_mid_ZN_4, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,6.7056, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2738,3.9624, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,3.9624, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_4_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name Perimeter_mid_ZN_4, !- Zone Name Zone, !- Outside Boundary Condition Perimeter_mid_ZN_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,6.7056, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,3.9624, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,3.9624, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_mid_ZN_5_Wall_North,!- Name Wall, !- Surface Type int_wall, !- Construction Name Core_mid, !- Zone Name Zone, !- Outside Boundary Condition Perimeter_mid_ZN_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,28.7006,6.7056, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,3.9624, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,3.9624, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_mid_ZN_5_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Core_mid, !- Zone Name Zone, !- Outside Boundary Condition Perimeter_mid_ZN_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,4.5732,6.7056, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,3.9624, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,3.9624, !- X,Y,Z ==> Vertex 3 {m} 45.3375,28.7006,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_mid_ZN_5_Wall_South,!- Name Wall, !- Surface Type int_wall, !- Construction Name Core_mid, !- Zone Name Zone, !- Outside Boundary Condition Perimeter_mid_ZN_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,4.5732,6.7056, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,3.9624, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,3.9624, !- X,Y,Z ==> Vertex 3 {m} 45.3375,4.5732,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_mid_ZN_5_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Core_mid, !- Zone Name Zone, !- Outside Boundary Condition Perimeter_mid_ZN_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,28.7006,6.7056, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,3.9624, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,3.9624, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_1_Wall_South, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Perimeter_top_ZN_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,10.668, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,7.9248, !- X,Y,Z ==> Vertex 2 {m} 49.911,0.0000,7.9248, !- X,Y,Z ==> Vertex 3 {m} 49.911,0.0000,10.668; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_1_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Perimeter_top_ZN_1, !- Zone Name Zone, !- Outside Boundary Condition Perimeter_top_ZN_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,0.0000,10.668, !- X,Y,Z ==> Vertex 1 {m} 49.911,0.0000,7.9248, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m} 45.3375,4.5732,10.668; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_2_Wall_East, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Perimeter_top_ZN_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,0.0000,10.668, !- X,Y,Z ==> Vertex 1 {m} 49.911,0.0000,7.9248, !- X,Y,Z ==> Vertex 2 {m} 49.911,33.2738,7.9248, !- X,Y,Z ==> Vertex 3 {m} 49.911,33.2738,10.668; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_2_Wall_North, !- Name Wall, !- Surface Type int_wall, !- Construction Name Perimeter_top_ZN_2, !- Zone Name Zone, !- Outside Boundary Condition Perimeter_top_ZN_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,33.2738,10.668, !- X,Y,Z ==> Vertex 1 {m} 49.911,33.2738,7.9248, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,7.9248, !- X,Y,Z ==> Vertex 3 {m} 45.3375,28.7006,10.668; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_3_Wall_North, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Perimeter_top_ZN_3, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,33.2738,10.668, !- X,Y,Z ==> Vertex 1 {m} 49.911,33.2738,7.9248, !- X,Y,Z ==> Vertex 2 {m} 0.0000,33.2738,7.9248, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,10.668; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_3_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Perimeter_top_ZN_3, !- Zone Name Zone, !- Outside Boundary Condition Perimeter_top_ZN_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,10.668, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2738,7.9248, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,7.9248, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,10.668; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_4_Wall_West, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Perimeter_top_ZN_4, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,10.668, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2738,7.9248, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,7.9248, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,10.668; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_4_Wall_South, !- Name Wall, !- Surface Type int_wall, !- Construction Name Perimeter_top_ZN_4, !- Zone Name Zone, !- Outside Boundary Condition Perimeter_top_ZN_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,10.668, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,7.9248, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,10.668; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_top_ZN_5_Wall_North,!- Name Wall, !- Surface Type int_wall, !- Construction Name Core_top, !- Zone Name Zone, !- Outside Boundary Condition Perimeter_top_ZN_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,28.7006,10.668, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,7.9248, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,7.9248, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,10.668; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_top_ZN_5_Wall_East, !- Name Wall, !- Surface Type int_wall, !- Construction Name Core_top, !- Zone Name Zone, !- Outside Boundary Condition Perimeter_top_ZN_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,4.5732,10.668, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,7.9248, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,7.9248, !- X,Y,Z ==> Vertex 3 {m} 45.3375,28.7006,10.668; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_top_ZN_5_Wall_South,!- Name Wall, !- Surface Type int_wall, !- Construction Name Core_top, !- Zone Name Zone, !- Outside Boundary Condition Perimeter_top_ZN_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,4.5732,10.668, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,7.9248, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m} 45.3375,4.5732,10.668; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_top_ZN_5_Wall_West, !- Name Wall, !- Surface Type int_wall, !- Construction Name Core_top, !- Zone Name Zone, !- Outside Boundary Condition Perimeter_top_ZN_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,28.7006,10.668, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,7.9248, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,10.668; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_Plenum_Wall_North, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name FirstFloor_Plenum, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,33.2738,3.9624, !- X,Y,Z ==> Vertex 1 {m} 49.911,33.2738,2.7432, !- X,Y,Z ==> Vertex 2 {m} 0.0000,33.2738,2.7432, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,3.9624; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_Plenum_Wall_East, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name FirstFloor_Plenum, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,0.0000,3.9624, !- X,Y,Z ==> Vertex 1 {m} 49.911,0.0000,2.7432, !- X,Y,Z ==> Vertex 2 {m} 49.911,33.2738,2.7432, !- X,Y,Z ==> Vertex 3 {m} 49.911,33.2738,3.9624; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_Plenum_Wall_South, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name FirstFloor_Plenum, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,3.9624, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,2.7432, !- X,Y,Z ==> Vertex 2 {m} 49.911,0.0000,2.7432, !- X,Y,Z ==> Vertex 3 {m} 49.911,0.0000,3.9624; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_Plenum_Wall_West, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name FirstFloor_Plenum, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,3.9624, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2738,2.7432, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,2.7432, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,3.9624; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_Plenum_Wall_North, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name MidFloor_Plenum, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,33.2738,7.9248, !- X,Y,Z ==> Vertex 1 {m} 49.911,33.2738,6.7056, !- X,Y,Z ==> Vertex 2 {m} 0.0000,33.2738,6.7056, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,7.9248; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_Plenum_Wall_East, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name MidFloor_Plenum, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,0.0000,7.9248, !- X,Y,Z ==> Vertex 1 {m} 49.911,0.0000,6.7056, !- X,Y,Z ==> Vertex 2 {m} 49.911,33.2738,6.7056, !- X,Y,Z ==> Vertex 3 {m} 49.911,33.2738,7.9248; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_Plenum_Wall_South, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name MidFloor_Plenum, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,7.9248, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,6.7056, !- X,Y,Z ==> Vertex 2 {m} 49.911,0.0000,6.7056, !- X,Y,Z ==> Vertex 3 {m} 49.911,0.0000,7.9248; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_Plenum_Wall_West, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name MidFloor_Plenum, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,7.9248, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2738,6.7056, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,6.7056, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,7.9248; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_Plenum_Wall_North, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name TopFloor_Plenum, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,33.2738,11.8872, !- X,Y,Z ==> Vertex 1 {m} 49.911,33.2738,10.668, !- X,Y,Z ==> Vertex 2 {m} 0.0000,33.2738,10.668, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,11.8872; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_Plenum_Wall_East, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name TopFloor_Plenum, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.911,0.0000,11.8872, !- X,Y,Z ==> Vertex 1 {m} 49.911,0.0000,10.668, !- X,Y,Z ==> Vertex 2 {m} 49.911,33.2738,10.668, !- X,Y,Z ==> Vertex 3 {m} 49.911,33.2738,11.8872; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_Plenum_Wall_South, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name TopFloor_Plenum, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,11.8872, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,10.668, !- X,Y,Z ==> Vertex 2 {m} 49.911,0.0000,10.668, !- X,Y,Z ==> Vertex 3 {m} 49.911,0.0000,11.8872; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_Plenum_Wall_West, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name TopFloor_Plenum, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,11.8872, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2738,10.668, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,10.668, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,11.8872; !- X,Y,Z ==> Vertex 4 {m} !- =========== ALL OBJECTS IN CLASS: SURFACE:HEATTRANSFER:SUB =========== FenestrationSurface:Detailed, Perimeter_bot_ZN_1_Wall_South_Window1, !- Name Window, !- Surface Type Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface Perimeter_bot_ZN_1_Wall_South, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000000000000,0.000000000000,2.329300000000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.95455007488, !- X,Y,Z ==> Vertex 2 {m} 15.8242,0.0000,0.95455007488, !- X,Y,Z ==> Vertex 3 {m} 15.824200000000,0.000000000000,2.329300000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_bot_ZN_1_Wall_South_Window2, !- Name Window, !- Surface Type Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface Perimeter_bot_ZN_1_Wall_South, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 17.043400000000,0.000000000000,2.329300000000, !- X,Y,Z ==> Vertex 1 {m} 17.0434,0.0000,0.95455007488, !- X,Y,Z ==> Vertex 2 {m} 32.8676,0.0000,0.95455007488, !- X,Y,Z ==> Vertex 3 {m} 32.867600000000,0.000000000000,2.329300000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_bot_ZN_1_Wall_South_Window3, !- Name Window, !- Surface Type Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface Perimeter_bot_ZN_1_Wall_South, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 34.086800000000,0.000000000000,2.329300000000, !- X,Y,Z ==> Vertex 1 {m} 34.0868,0.0000,0.95455007488, !- X,Y,Z ==> Vertex 2 {m} 49.9100,0.0000,0.95455007488, !- X,Y,Z ==> Vertex 3 {m} 49.910000000000,0.000000000000,2.329300000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_bot_ZN_1_Wall_South_Door1, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Perimeter_bot_ZN_1_Wall_South, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 15.982594238416,0.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 15.982594238416,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 16.896994238416,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 16.896994238416,0.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_bot_ZN_1_Wall_South_Door2, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Perimeter_bot_ZN_1_Wall_South, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 33.011303488322,0.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 33.011303488322,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 33.925703488322,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 33.925703488322,0.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_bot_ZN_3_Wall_North_Window1, !- Name Window, !- Surface Type Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface Perimeter_bot_ZN_3_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 49.910000000000,33.273800000000,2.329300000000, !- X,Y,Z ==> Vertex 1 {m} 49.9100,33.2738,0.95455007488, !- X,Y,Z ==> Vertex 2 {m} 34.0868,33.2738,0.95455007488, !- X,Y,Z ==> Vertex 3 {m} 34.086800000000,33.273800000000,2.329300000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_bot_ZN_3_Wall_North_Window2, !- Name Window, !- Surface Type Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface Perimeter_bot_ZN_3_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 32.867600000000,33.273800000000,2.329300000000, !- X,Y,Z ==> Vertex 1 {m} 32.8676,33.2738,0.95455007488, !- X,Y,Z ==> Vertex 2 {m} 17.0434,33.2738,0.95455007488, !- X,Y,Z ==> Vertex 3 {m} 17.043400000000,33.273800000000,2.329300000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_bot_ZN_3_Wall_North_Window3, !- Name Window, !- Surface Type Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface Perimeter_bot_ZN_3_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 15.824200000000,33.273800000000,2.329300000000, !- X,Y,Z ==> Vertex 1 {m} 15.8242,33.2738,0.95455007488, !- X,Y,Z ==> Vertex 2 {m} 0.0000,33.2738,0.95455007488, !- X,Y,Z ==> Vertex 3 {m} 0.000000000000,33.273800000000,2.329300000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_bot_ZN_3_Wall_North_Door1, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Perimeter_bot_ZN_3_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 33.944687903038,33.273800000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 33.944687903038,33.273800000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 33.030287903038,33.273800000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 33.030287903038,33.273800000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_bot_ZN_3_Wall_North_Door2, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Perimeter_bot_ZN_3_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 16.843341472948,33.273800000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 16.843341472948,33.273800000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 15.928941472948,33.273800000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 15.928941472948,33.273800000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_bot_ZN_2_Wall_East_Window1, !- Name Window, !- Surface Type Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface Perimeter_bot_ZN_2_Wall_East, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 49.911000000000,0.000000000000,2.329300000000, !- X,Y,Z ==> Vertex 1 {m} 49.9110,0.0000,0.97196720032, !- X,Y,Z ==> Vertex 2 {m} 49.9110,30.8353,0.97196720032, !- X,Y,Z ==> Vertex 3 {m} 49.911000000000,30.835300000000,2.329300000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_bot_ZN_2_Wall_East_Window2, !- Name Window, !- Surface Type Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface Perimeter_bot_ZN_2_Wall_East, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 49.911000000000,32.054500000000,2.329300000000, !- X,Y,Z ==> Vertex 1 {m} 49.9110,32.0545,0.97196720032, !- X,Y,Z ==> Vertex 2 {m} 49.9110,33.2737,0.97196720032, !- X,Y,Z ==> Vertex 3 {m} 49.911000000000,33.273700000000,2.329300000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_bot_ZN_2_Wall_East_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Perimeter_bot_ZN_2_Wall_East, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 49.911000000000,30.985198503573,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 49.911000000000,30.985198503573,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 49.911000000000,31.899598503573,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 49.911000000000,31.899598503573,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_bot_ZN_4_Wall_West_Window1, !- Name Window, !- Surface Type Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface Perimeter_bot_ZN_4_Wall_West, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000000000000,33.273700000000,2.329300000000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2737,0.97196720032, !- X,Y,Z ==> Vertex 2 {m} 0.0000,2.4384,0.97196720032, !- X,Y,Z ==> Vertex 3 {m} 0.000000000000,2.438400000000,2.329300000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_bot_ZN_4_Wall_West_Window2, !- Name Window, !- Surface Type Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface Perimeter_bot_ZN_4_Wall_West, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000000000000,1.219200000000,2.329300000000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,1.2192,0.97196720032, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.97196720032, !- X,Y,Z ==> Vertex 3 {m} 0.000000000000,0.000000000000,2.329300000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_bot_ZN_4_Wall_West_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Perimeter_bot_ZN_4_Wall_West, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 0.000000000000,2.279591323208,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 0.000000000000,2.279591323208,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 0.000000000000,1.365191323208,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 0.000000000000,1.365191323208,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_mid_ZN_1_Wall_South_Window, !- Name Window, !- Surface Type Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface Perimeter_mid_ZN_1_Wall_South, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,0.0000,6.2917, !- X,Y,Z ==> Vertex 1 {m} 0.000,0.0000,4.984108, !- X,Y,Z ==> Vertex 2 {m} 49.91,0.0000,4.984108, !- X,Y,Z ==> Vertex 3 {m} 49.91,0.0000,6.2917; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_mid_ZN_2_Wall_East_Window, !- Name Window, !- Surface Type Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface Perimeter_mid_ZN_2_Wall_East, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 49.911,0.0000,6.2917, !- X,Y,Z ==> Vertex 1 {m} 49.911,0.0000,4.984108, !- X,Y,Z ==> Vertex 2 {m} 49.911,33.2737,4.984108, !- X,Y,Z ==> Vertex 3 {m} 49.911,33.2737,6.2917; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_mid_ZN_3_Wall_North_Window, !- Name Window, !- Surface Type Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface Perimeter_mid_ZN_3_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 49.91,33.2738,6.2917, !- X,Y,Z ==> Vertex 1 {m} 49.91,33.2738,4.984108, !- X,Y,Z ==> Vertex 2 {m} 0.000,33.2738,4.984108, !- X,Y,Z ==> Vertex 3 {m} 0.000,33.2738,6.2917; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_mid_ZN_4_Wall_West_Window, !- Name Window, !- Surface Type Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface Perimeter_mid_ZN_4_Wall_West, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,33.2737,6.2917, !- X,Y,Z ==> Vertex 1 {m} 0.000,33.2737,4.984108, !- X,Y,Z ==> Vertex 2 {m} 0.000,0.0000,4.984108, !- X,Y,Z ==> Vertex 3 {m} 0.000,0.0000,6.2917; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_top_ZN_1_Wall_South_Window, !- Name Window, !- Surface Type Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface Perimeter_top_ZN_1_Wall_South, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,0.0000,10.2541, !- X,Y,Z ==> Vertex 1 {m} 0.000,0.0000,8.946508, !- X,Y,Z ==> Vertex 2 {m} 49.91,0.0000,8.946508, !- X,Y,Z ==> Vertex 3 {m} 49.91,0.0000,10.2541; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_top_ZN_2_Wall_East_Window, !- Name Window, !- Surface Type Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface Perimeter_top_ZN_2_Wall_East, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 49.911,0.0000,10.2541, !- X,Y,Z ==> Vertex 1 {m} 49.911,0.0000,8.946508, !- X,Y,Z ==> Vertex 2 {m} 49.911,33.2737,8.946508, !- X,Y,Z ==> Vertex 3 {m} 49.911,33.2737,10.2541; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_top_ZN_3_Wall_North_Window, !- Name Window, !- Surface Type Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface Perimeter_top_ZN_3_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 49.91,33.2738,10.2541, !- X,Y,Z ==> Vertex 1 {m} 49.91,33.2738,8.946508, !- X,Y,Z ==> Vertex 2 {m} 0.000,33.2738,8.946508, !- X,Y,Z ==> Vertex 3 {m} 0.000,33.2738,10.2541; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_top_ZN_4_Wall_West_Window, !- Name Window, !- Surface Type Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface Perimeter_top_ZN_4_Wall_West, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,33.2737,10.2541, !- X,Y,Z ==> Vertex 1 {m} 0.000,33.2737,8.946508, !- X,Y,Z ==> Vertex 2 {m} 0.000,0.0000,8.946508, !- X,Y,Z ==> Vertex 3 {m} 0.000,0.0000,10.2541; !- X,Y,Z ==> Vertex 4 {m} !- =========== ALL OBJECTS IN CLASS: SURFACE:HEATTRANSFER:INTERNALMASS =========== InternalMass, Core_bottom_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Core_bottom, !- Zone Name 1967.0770; !- Surface Area {m2} InternalMass, Core_mid_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Core_mid, !- Zone Name 1967.0770; !- Surface Area {m2} InternalMass, Core_top_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Core_top, !- Zone Name 1967.0770; !- Surface Area {m2} InternalMass, Perimeter_top_ZN_3_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Perimeter_top_ZN_3, !- Zone Name 414.6750; !- Surface Area {m2} InternalMass, Perimeter_top_ZN_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Perimeter_top_ZN_2, !- Zone Name 262.5073; !- Surface Area {m2} InternalMass, Perimeter_top_ZN_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Perimeter_top_ZN_1, !- Zone Name 414.6723; !- Surface Area {m2} InternalMass, Perimeter_top_ZN_4_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Perimeter_top_ZN_4, !- Zone Name 262.5056; !- Surface Area {m2} InternalMass, Perimeter_bot_ZN_3_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Perimeter_bot_ZN_3, !- Zone Name 414.6750; !- Surface Area {m2} InternalMass, Perimeter_bot_ZN_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Perimeter_bot_ZN_2, !- Zone Name 262.5073; !- Surface Area {m2} InternalMass, Perimeter_bot_ZN_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Perimeter_bot_ZN_1, !- Zone Name 414.6723; !- Surface Area {m2} InternalMass, Perimeter_bot_ZN_4_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Perimeter_bot_ZN_4, !- Zone Name 262.5056; !- Surface Area {m2} InternalMass, Perimeter_mid_ZN_3_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Perimeter_mid_ZN_3, !- Zone Name 414.6750; !- Surface Area {m2} InternalMass, Perimeter_mid_ZN_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Perimeter_mid_ZN_2, !- Zone Name 262.5073; !- Surface Area {m2} InternalMass, Perimeter_mid_ZN_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Perimeter_mid_ZN_1, !- Zone Name 414.6723; !- Surface Area {m2} InternalMass, Perimeter_mid_ZN_4_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Perimeter_mid_ZN_4, !- Zone Name 262.5056; !- Surface Area {m2} !- =========== ALL OBJECTS IN CLASS: SCHEDULETYPE =========== ScheduleTypeLimits, Any Number; !- Name ScheduleTypeLimits, Fraction, !- Name 0.0, !- Lower Limit Value 1.0, !- Upper Limit Value Continuous; !- Numeric Type ScheduleTypeLimits, Temperature, !- Name -60, !- Lower Limit Value 200, !- Upper Limit Value Continuous; !- Numeric Type ScheduleTypeLimits, On/Off, !- Name 0, !- Lower Limit Value 1, !- Upper Limit Value Discrete; !- Numeric Type ScheduleTypeLimits, Control Type, !- Name 0, !- Lower Limit Value 4, !- Upper Limit Value Discrete; !- Numeric Type ScheduleTypeLimits, Humidity, !- Name 10, !- Lower Limit Value 90, !- Upper Limit Value Continuous; !- Numeric Type ScheduleTypeLimits, Number; !- Name !- =========== ALL OBJECTS IN CLASS: SCHEDULE:COMPACT =========== Schedule:Compact, Exterior_lighting_schedule_a, !- Name fraction, !- Schedule Type Limits Name Through:12/31, !- Field 1 For:AllDays, !- Field 2 Until: 06:00,0, !- Field 3 Until: 24:00,1; !- Field 5 Schedule:Compact, Exterior_lighting_schedule_b, !- Name fraction, !- Schedule Type Limits Name Through:12/31, !- Field 1 For:AllDays, !- Field 2 Until: 06:00,0.7, !- Field 3 Until: 24:00,1; !- Field 5 Schedule:Compact, Exterior_lighting_schedule_a_IECC2015, !- Name fraction, !- Schedule Type Limits Name Through:12/31, !- Field 1 For:Weekdays SummerDesignDay, !- Field 2 Until: 07:00,0, !- Field 3 Until: 22:00,1, !- Field 5 Until: 24:00,0, !- Field 7 For:Saturdays, !- Field 9 Until: 07:00,0, !- Field 10 Until: 18:00,1, !- Field 12 Until: 24:00,0, !- Field 14 For:AllOtherDays, !- Field 16 Until: 24:00,0; !- Field 17 Schedule:Compact, Exterior_lighting_schedule_b_2016, !- Name fraction, !- Schedule Type Limits Name Through:12/31, !- Field 1 For:AllDays, !- Field 2 Until: 06:00,0.5, !- Field 3 Until: 24:00,1; !- Field 5 Schedule:Compact, Exterior_lighting_schedule_c_2016, !- Name fraction, !- Schedule Type Limits Name Through:12/31, !- Field 1 For:AllDays, !- Field 2 Until: 06:00,0.5, !- Field 3 Until: 19:00,1, !- Field 5 Until: 24:00,0.5; !- Field 7 Schedule:Compact, Hours_of_operation, !- Name on/off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 06:00,0.0, !- Field 3 Until: 22:00,1.0, !- Field 5 Until: 24:00,0.0, !- Field 7 For: Saturday WinterDesignDay, !- Field 9 Until: 06:00,0.0, !- Field 10 Until: 18:00,1.0, !- Field 12 Until: 24:00,0.0, !- Field 14 For:Sunday Holidays AllOtherDays, !- Field 16 Until: 24:00,0.0; !- Field 17 Schedule:Compact, ALWAYS_ON, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1.0; !- Field 3 Schedule:Compact, Exterior_Lgt_ALWAYS_ON, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1; !- Field 3 Schedule:Compact, Exterior_Lgt_189_1, !- Name Fraction, !- Schedule Type Limits Name Through:12/31, !- Field 1 For:Weekdays, !- Field 2 Until: 9:00,0.5, !- Field 3 Until: 24:00,1.0, !- Field 5 For:Saturday, !- Field 7 Until: 9:00,0.5, !- Field 8 Until: 19:00,1.0, !- Field 10 Until: 24:00,0.5, !- Field 12 For:Sunday Holidays AllOtherDays, !- Field 14 Until: 9:00,0.5, !- Field 15 Until: 18:00,1.0, !- Field 17 Until: 24:00,0.5; !- Field 19 Schedule:Compact, ALWAYS_OFF, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.0; !- Field 3 Schedule:Compact, HVACOperationSchd, !- Name on/off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 06:00,0.0, !- Field 3 Until: 22:00,1.0, !- Field 5 Until: 24:00,0.0, !- Field 7 For: Saturday WinterDesignDay, !- Field 9 Until: 06:00,0.0, !- Field 10 Until: 18:00,1.0, !- Field 12 Until: 24:00,0.0, !- Field 14 For:Sunday Holidays AllOtherDays, !- Field 16 Until: 24:00,0.0; !- Field 17 Schedule:Compact, BLDG_LIGHT_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 5:00,0.05, !- Field 3 Until: 6:00,0.1, !- Field 5 Until: 7:00,0.08623256, !- Field 7 Until: 8:00,0.25869768, !- Field 9 Until: 17:00,0.77609304, !- Field 11 Until: 18:00,0.4311628, !- Field 13 Until: 20:00,0.25869768, !- Field 15 Until: 22:00,0.17246512, !- Field 17 Until: 23:00,0.08623256, !- Field 19 Until: 24:00,0.04311628, !- Field 21 For: SummerDesignDay, !- Field 23 Until: 24:00,1, !- Field 24 For: Saturday, !- Field 26 Until: 6:00,0.05, !- Field 27 Until: 8:00,0.08623256, !- Field 29 Until: 12:00,0.25869768, !- Field 31 Until: 17:00,0.12934884, !- Field 33 Until: 19:00,0.04311628, !- Field 35 Until: 24:00,0.05, !- Field 37 For: WinterDesignDay, !- Field 39 Until: 24:00,0, !- Field 40 For: Sunday Holidays AllOtherDays, !- Field 42 Until: 6:00,0.05, !- Field 43 Until: 18:00,0.04311628, !- Field 45 Until: 24:00,0.05; !- Field 47 Schedule:Compact, BLDG_EQUIP_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 06:00,0.3076738408, !- Field 3 Until: 08:00,0.381234796, !- Field 5 Until: 12:00,0.857778291, !- Field 7 Until: 13:00,0.762469592, !- Field 9 Until: 17:00,0.857778291, !- Field 11 Until: 18:00,0.476543495, !- Field 13 Until: 24:00,0.381234796, !- Field 15 For: SummerDesignDay, !- Field 17 Until: 24:00,1.0, !- Field 18 For: Saturday, !- Field 20 Until: 06:00,0.2307553806, !- Field 21 Until: 08:00,0.381234796, !- Field 23 Until: 12:00,0.476543495, !- Field 25 Until: 17:00,0.3335804465, !- Field 27 Until: 19:00,0.285926097, !- Field 29 Until: 24:00,0.2307553806, !- Field 31 For: WinterDesignDay, !- Field 33 Until: 24:00,0.0, !- Field 34 For: Sunday Holidays AllOtherDays, !- Field 36 Until: 06:00,0.2307553806, !- Field 37 Until: 18:00,0.285926097, !- Field 39 Until: 24:00,0.2307553806; !- Field 41 Schedule:Compact, BLDG_OCC_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 06:00,0.0, !- Field 3 Until: 07:00,0.1, !- Field 5 Until: 08:00,0.2, !- Field 7 Until: 12:00,0.95, !- Field 9 Until: 13:00,0.5, !- Field 11 Until: 17:00,0.95, !- Field 13 Until: 18:00,0.3, !- Field 15 Until: 22:00,0.1, !- Field 17 Until: 24:00,0.05, !- Field 19 For: SummerDesignDay, !- Field 21 Until: 06:00,0.000000001,!- Field 22 Until: 22:00,1.0, !- Field 24 Until: 24:00,0.05, !- Field 26 For: Saturday, !- Field 28 Until: 06:00,0.0, !- Field 29 Until: 08:00,0.1, !- Field 31 Until: 12:00,0.3, !- Field 33 Until: 17:00,0.1, !- Field 35 Until: 19:00,0.05, !- Field 37 Until: 24:00,0.0, !- Field 39 For: WinterDesignDay, !- Field 41 Until: 24:00,0.0, !- Field 42 For:Sunday Holidays AllOtherDays, !- Field 44 Until: 06:00,0.0, !- Field 45 Until: 18:00,0.05, !- Field 47 Until: 24:00,0.0; !- Field 49 Schedule:Compact, BLDG_OCC_SCH_w_SB, !-Name Fraction, !-Schedule Type Limits Name Through: 12/31, For: Weekdays, Until: 01:00, 0, Until: 02:00, 0, Until: 03:00, 0, Until: 04:00, 0, Until: 05:00, 0, Until: 06:00, 0, Until: 07:00, 0.1, Until: 08:00, 0.2, Until: 09:00, 0.95, Until: 10:00, 0.95, Until: 11:00, 0, Until: 12:00, 0.95, Until: 13:00, 0, Until: 14:00, 0.95, Until: 15:00, 0, Until: 16:00, 0.95, Until: 17:00, 0.95, Until: 18:00, 0.3, Until: 19:00, 0.1, Until: 20:00, 0.1, Until: 21:00, 0.1, Until: 22:00, 0.1, Until: 23:00, 0.05, Until: 24:00, 0.05, For: Saturday, Until: 01:00, 0, Until: 02:00, 0, Until: 03:00, 0, Until: 04:00, 0, Until: 05:00, 0, Until: 06:00, 0, Until: 07:00, 0.1, Until: 08:00, 0.1, Until: 09:00, 0.3, Until: 10:00, 0.3, Until: 11:00, 0, Until: 12:00, 0.3, Until: 13:00, 0, Until: 14:00, 0.1, Until: 15:00, 0, Until: 16:00, 0.1, Until: 17:00, 0.1, Until: 18:00, 0.05, Until: 19:00, 0.05, Until: 20:00, 0, Until: 21:00, 0, Until: 22:00, 0, Until: 23:00, 0, Until: 24:00, 0, For: SummerDesignDay, Until: 06:00,0.000000001, Until: 22:00,1.0, Until: 24:00,0.05, For: WinterDesignDay, Until: 24:00,0.0, For:Sunday Holidays AllOtherDays, Until: 06:00,0.0, Until: 18:00,0.05, Until: 24:00,0.0; Schedule:Compact, BLDG_OCC_SCH_wo_SB, !-Name Fraction, !-Schedule Type Limits Name Through: 12/31, For: Weekdays, Until: 01:00, 0, Until: 02:00, 0, Until: 03:00, 0, Until: 04:00, 0, Until: 05:00, 0, Until: 06:00, 0, Until: 07:00, 0.1, Until: 08:00, 0.2, Until: 09:00, 0.95, Until: 10:00, 0.95, Until: 11:00, 0.975703226795432, Until: 12:00, 0.95, Until: 13:00, 0.513528014102859, Until: 14:00, 0.95, Until: 15:00, 0.975703226795432, Until: 16:00, 0.95, Until: 17:00, 0.95, Until: 18:00, 0.3, Until: 19:00, 0.1, Until: 20:00, 0.1, Until: 21:00, 0.1, Until: 22:00, 0.1, Until: 23:00, 0.05, Until: 24:00, 0.05, For: Saturday, Until: 01:00, 0, Until: 02:00, 0, Until: 03:00, 0, Until: 04:00, 0, Until: 05:00, 0, Until: 06:00, 0, Until: 07:00, 0.1, Until: 08:00, 0.1, Until: 09:00, 0.3, Until: 10:00, 0.3, Until: 11:00, 0.308116808461715, Until: 12:00, 0.3, Until: 13:00, 0.102705602820572, Until: 14:00, 0.1, Until: 15:00, 0.102705602820572, Until: 16:00, 0.1, Until: 17:00, 0.1, Until: 18:00, 0.05, Until: 19:00, 0.05, Until: 20:00, 0, Until: 21:00, 0, Until: 22:00, 0, Until: 23:00, 0, Until: 24:00, 0, For: SummerDesignDay, Until: 06:00,0.000000001, Until: 22:00,1.0, Until: 24:00,0.05, For: WinterDesignDay, Until: 24:00,0.0, For:Sunday Holidays AllOtherDays, Until: 06:00,0.0, Until: 18:00,0.05, Until: 24:00,0.0; Schedule:Compact, BLDG_ELEVATORS, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,0.69, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,0.0, !- Field 6 For: Weekdays, !- Field 8 Until: 07:00,0.0, !- Field 9 Until: 08:00,0.35, !- Field 11 Until: 09:00,0.69, !- Field 13 Until: 10:00,0.43, !- Field 15 Until: 11:00,0.37, !- Field 17 Until: 12:00,0.43, !- Field 19 Until: 13:00,0.58, !- Field 21 Until: 14:00,0.48, !- Field 23 Until: 15:00,0.37, !- Field 25 Until: 16:00,0.37, !- Field 27 Until: 17:00,0.46, !- Field 29 Until: 18:00,0.62, !- Field 31 Until: 19:00,0.12, !- Field 33 Until: 20:00,0.04, !- Field 35 Until: 21:00,0.04, !- Field 37 Until: 24:00,0.00, !- Field 39 For: Saturday, !- Field 41 Until: 07:00,0.0, !- Field 42 Until: 08:00,0.16, !- Field 44 Until: 09:00,0.14, !- Field 46 Until: 10:00,0.21, !- Field 48 Until: 11:00,0.18, !- Field 50 Until: 12:00,0.25, !- Field 52 Until: 13:00,0.21, !- Field 54 Until: 14:00,0.13, !- Field 56 Until: 15:00,0.08, !- Field 58 Until: 16:00,0.04, !- Field 60 Until: 17:00,0.05, !- Field 62 Until: 18:00,0.06, !- Field 64 Until: 24:00,0.00, !- Field 66 For:Sunday Holidays AllOtherDays, !- Field 68 Until: 24:00,0.0; !- Field 69 Schedule:Compact, ELEV_LIGHT_FAN_SCH_24_7, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1; !- Field 3 Schedule:Compact, ELEV_LIGHT_FAN_SCH_ADD_DF, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,0.69, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,0.0, !- Field 6 For: Weekdays, !- Field 8 Until: 07:00,0.0, !- Field 9 Until: 08:00,0.35, !- Field 11 Until: 09:00,0.69, !- Field 13 Until: 10:00,0.43, !- Field 15 Until: 11:00,0.37, !- Field 17 Until: 12:00,0.43, !- Field 19 Until: 13:00,0.58, !- Field 21 Until: 14:00,0.48, !- Field 23 Until: 15:00,0.37, !- Field 25 Until: 16:00,0.37, !- Field 27 Until: 17:00,0.46, !- Field 29 Until: 18:00,0.62, !- Field 31 Until: 19:00,0.12, !- Field 33 Until: 20:00,0.04, !- Field 35 Until: 21:00,0.04, !- Field 37 Until: 24:00,0.00, !- Field 39 For: Saturday, !- Field 41 Until: 07:00,0.0, !- Field 42 Until: 08:00,0.16, !- Field 44 Until: 09:00,0.14, !- Field 46 Until: 10:00,0.21, !- Field 48 Until: 11:00,0.18, !- Field 50 Until: 12:00,0.25, !- Field 52 Until: 13:00,0.21, !- Field 54 Until: 14:00,0.13, !- Field 56 Until: 15:00,0.08, !- Field 58 Until: 16:00,0.04, !- Field 60 Until: 17:00,0.05, !- Field 62 Until: 18:00,0.06, !- Field 64 Until: 24:00,0.00, !- Field 66 For:Sunday Holidays AllOtherDays, !- Field 68 Until: 24:00,0.0; !- Field 69 Schedule:Compact, BLDG_SWH_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 05:00,0.00, !- Field 3 Until: 06:00,0.00, !- Field 5 Until: 07:00,0.07, !- Field 7 Until: 08:00,0.19, !- Field 9 Until: 09:00,0.35, !- Field 11 Until: 10:00,0.38, !- Field 13 Until: 11:00,0.39, !- Field 15 Until: 12:00,0.47, !- Field 17 Until: 13:00,0.57, !- Field 19 Until: 14:00,0.54, !- Field 21 Until: 15:00,0.34, !- Field 23 Until: 16:00,0.33, !- Field 25 Until: 17:00,0.44, !- Field 27 Until: 18:00,0.26, !- Field 29 Until: 19:00,0.21, !- Field 31 Until: 20:00,0.15, !- Field 33 Until: 21:00,0.17, !- Field 35 Until: 22:00,0.08, !- Field 37 Until: 24:00,0.05, !- Field 39 For: Saturday WinterDesignDay, !- Field 41 Until: 05:00,0.00, !- Field 42 Until: 06:00,0.00, !- Field 44 Until: 07:00,0.07, !- Field 46 Until: 08:00,0.11, !- Field 48 Until: 09:00,0.15, !- Field 50 Until: 10:00,0.21, !- Field 52 Until: 11:00,0.19, !- Field 54 Until: 12:00,0.23, !- Field 56 Until: 13:00,0.20, !- Field 58 Until: 14:00,0.19, !- Field 60 Until: 15:00,0.15, !- Field 62 Until: 16:00,0.13, !- Field 64 Until: 17:00,0.14, !- Field 66 Until: 19:00,0.07, !- Field 68 Until: 22:00,0.00, !- Field 70 Until: 24:00,0.00, !- Field 72 For:Sunday Holidays AllOtherDays, !- Field 74 Until: 05:00,0.00, !- Field 75 Until: 06:00,0.00, !- Field 77 Until: 11:00,0.04, !- Field 79 Until: 13:00,0.06, !- Field 81 Until: 14:00,0.09, !- Field 83 Until: 15:00,0.06, !- Field 85 Until: 18:00,0.04, !- Field 87 Until: 22:00,0.00, !- Field 89 Until: 24:00,0.00; !- Field 91 Schedule:Compact, ACTIVITY_SCH, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,120.; !- Field 3 Schedule:Compact, WORK_EFF_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.0; !- Field 3 Schedule:Compact, AIR_VELO_SCH, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, CLOTHING_SCH, !- Name Any Number, !- Schedule Type Limits Name Through: 04/30, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1.0, !- Field 3 Through: 09/30, !- Field 5 For: AllDays, !- Field 6 Until: 24:00,0.5, !- Field 7 Through: 12/31, !- Field 9 For: AllDays, !- Field 10 Until: 24:00,1.0; !- Field 11 Schedule:Compact, SHADING_SCH, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.0; !- Field 3 Schedule:Compact, PlantOnSched, !- Name On/Off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1.0; !- Field 3 Schedule:Compact, FAN_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1.0; !- Field 3 Schedule:Compact, ReheatCoilAvailSched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1.0; !- Field 3 Schedule:Compact, CoolingCoilAvailSched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1.0; !- Field 3 Schedule:Compact, HTGSETP_SCH_YES_OPTIMUM, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: WinterDesignDay, !- Field 2 Until: 05:00,15.6, !- Field 3 Until: 06:00,17.6, !- Field 5 Until: 07:00,19.6, !- Field 7 Until: 22:00,21.0, !- Field 9 Until: 24:00,15.6, !- Field 11 For: Weekdays, !- Field 13 Until: 05:00,15.6, !- Field 14 Until: 06:00,17.8, !- Field 16 Until: 07:00,20.0, !- Field 18 Until: 22:00,21.0, !- Field 20 Until: 24:00,15.6, !- Field 22 For SummerDesignDay, !- Field 24 Until: 24:00,15.6, !- Field 25 For: Saturday, !- Field 27 Until: 05:00,15.6, !- Field 28 Until: 06:00,17.8, !- Field 30 Until: 07:00,20.0, !- Field 32 Until: 17:00,21.0, !- Field 34 Until: 24:00,15.6, !- Field 36 For:Sunday Holidays AllOtherDays, !- Field 38 Until: 24:00,15.6; !- Field 39 Schedule:Compact, HTGSETP_SCH_YES_OPTIMUM_w_SB, !-Name Temperature, !-Schedule Type Limits Name Through: 12/31, For: Weekdays, Until: 01:00, 15.6, Until: 02:00, 15.6, Until: 03:00, 15.6, Until: 04:00, 15.6, Until: 05:00, 15.6, Until: 06:00, 17.8, Until: 07:00, 20, Until: 08:00, 21, Until: 09:00, 21, Until: 10:00, 21, Until: 11:00, 20.4444444444444, Until: 12:00, 21, Until: 13:00, 20.4444444444444, Until: 14:00, 21, Until: 15:00, 20.4444444444444, Until: 16:00, 21, Until: 17:00, 21, Until: 18:00, 21, Until: 19:00, 21, Until: 20:00, 21, Until: 21:00, 21, Until: 22:00, 21, Until: 23:00, 15.6, Until: 24:00, 15.6, For: Saturday, Until: 01:00, 15.6, Until: 02:00, 15.6, Until: 03:00, 15.6, Until: 04:00, 15.6, Until: 05:00, 15.6, Until: 06:00, 17.6, Until: 07:00, 20, Until: 08:00, 21, Until: 09:00, 21, Until: 10:00, 21, Until: 11:00, 20.4444444444444, Until: 12:00, 21, Until: 13:00, 20.4444444444444, Until: 14:00, 21, Until: 15:00, 20.4444444444444, Until: 16:00, 21, Until: 17:00, 21, Until: 18:00, 15.6, Until: 19:00, 15.6, Until: 20:00, 15.6, Until: 21:00, 15.6, Until: 22:00, 15.6, Until: 23:00, 15.6, Until: 24:00, 15.6, For: WinterDesignDay, Until: 05:00,15.6, Until: 06:00,17.6, Until: 07:00,19.6, Until: 22:00,21.0, Until: 24:00,15.6, For SummerDesignDay, Until: 24:00,15.6, For:Sunday Holidays AllOtherDays, Until: 24:00,15.6; Schedule:Compact, HTGSETP_SCH_YES_OPTIMUM_ORIGINAL, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: WinterDesignDay, !- Field 2 Until: 05:00,15.6, !- Field 3 Until: 06:00,17.6, !- Field 5 Until: 07:00,19.6, !- Field 7 Until: 22:00,21.0, !- Field 9 Until: 24:00,15.6, !- Field 11 For: Weekdays, !- Field 13 Until: 05:00,15.6, !- Field 14 Until: 06:00,17.8, !- Field 16 Until: 07:00,20.0, !- Field 18 Until: 22:00,21.0, !- Field 20 Until: 24:00,15.6, !- Field 22 For SummerDesignDay, !- Field 24 Until: 24:00,15.6, !- Field 25 For: Saturday, !- Field 27 Until: 05:00,15.6, !- Field 28 Until: 06:00,17.8, !- Field 30 Until: 07:00,20.0, !- Field 32 Until: 17:00,21.0, !- Field 34 Until: 24:00,15.6, !- Field 36 For:Sunday Holidays AllOtherDays, !- Field 38 Until: 24:00,15.6; !- Field 39 Schedule:Compact, HTGSETP_SCH_NO_OPTIMUM, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: WinterDesignDay, !- Field 2 Until: 05:00,15.6, !- Field 3 Until: 06:00,17.6, !- Field 5 Until: 07:00,19.6, !- Field 7 Until: 22:00,21.0, !- Field 9 Until: 24:00,15.6, !- Field 11 For: Weekdays, !- Field 13 Until: 05:00,15.6, !- Field 14 Until: 06:00,21.0, !- Field 16 Until: 07:00,21.0, !- Field 18 Until: 22:00,21.0, !- Field 20 Until: 24:00,15.6, !- Field 22 For SummerDesignDay, !- Field 24 Until: 24:00,15.6, !- Field 25 For: Saturday, !- Field 27 Until: 05:00,15.6, !- Field 28 Until: 06:00,21.0, !- Field 30 Until: 07:00,21.0, !- Field 32 Until: 17:00,21.0, !- Field 34 Until: 24:00,15.6, !- Field 36 For:Sunday Holidays AllOtherDays, !- Field 38 Until: 24:00,15.6; !- Field 39 Schedule:Compact, HTGSETP_SCH_PACU_VAV_bot,!- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: WinterDesignDay, !- Field 2 Until: 05:00,15.6, !- Field 3 Until: 06:00,17.6, !- Field 5 Until: 07:00,19.6, !- Field 7 Until: 22:00,21.0, !- Field 9 Until: 24:00,15.6, !- Field 11 For: Weekdays, !- Field 13 Until: 05:00,15.6, !- Field 14 Until: 06:00,21.0, !- Field 16 Until: 07:00,21.0, !- Field 18 Until: 22:00,21.0, !- Field 20 Until: 24:00,15.6, !- Field 22 For SummerDesignDay, !- Field 24 Until: 24:00,15.6, !- Field 25 For: Saturday, !- Field 27 Until: 05:00,15.6, !- Field 28 Until: 06:00,21.0, !- Field 30 Until: 07:00,21.0, !- Field 32 Until: 17:00,21.0, !- Field 34 Until: 24:00,15.6, !- Field 36 For:Sunday Holidays AllOtherDays, !- Field 38 Until: 24:00,15.6; !- Field 39 Schedule:Compact, HTGSETP_SCH_PACU_VAV_mid,!- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: WinterDesignDay, !- Field 2 Until: 05:00,15.6, !- Field 3 Until: 06:00,17.6, !- Field 5 Until: 07:00,19.6, !- Field 7 Until: 22:00,21.0, !- Field 9 Until: 24:00,15.6, !- Field 11 For: Weekdays, !- Field 13 Until: 05:00,15.6, !- Field 14 Until: 06:00,21.0, !- Field 16 Until: 07:00,21.0, !- Field 18 Until: 22:00,21.0, !- Field 20 Until: 24:00,15.6, !- Field 22 For SummerDesignDay, !- Field 24 Until: 24:00,15.6, !- Field 25 For: Saturday, !- Field 27 Until: 05:00,15.6, !- Field 28 Until: 06:00,21.0, !- Field 30 Until: 07:00,21.0, !- Field 32 Until: 17:00,21.0, !- Field 34 Until: 24:00,15.6, !- Field 36 For:Sunday Holidays AllOtherDays, !- Field 38 Until: 24:00,15.6; !- Field 39 Schedule:Compact, HTGSETP_SCH_PACU_VAV_top,!- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: WinterDesignDay, !- Field 2 Until: 05:00,15.6, !- Field 3 Until: 06:00,17.6, !- Field 5 Until: 07:00,19.6, !- Field 7 Until: 22:00,21.0, !- Field 9 Until: 24:00,15.6, !- Field 11 For: Weekdays, !- Field 13 Until: 05:00,15.6, !- Field 14 Until: 06:00,21.0, !- Field 16 Until: 07:00,21.0, !- Field 18 Until: 22:00,21.0, !- Field 20 Until: 24:00,15.6, !- Field 22 For SummerDesignDay, !- Field 24 Until: 24:00,15.6, !- Field 25 For: Saturday, !- Field 27 Until: 05:00,15.6, !- Field 28 Until: 06:00,21.0, !- Field 30 Until: 07:00,21.0, !- Field 32 Until: 17:00,21.0, !- Field 34 Until: 24:00,15.6, !- Field 36 For:Sunday Holidays AllOtherDays, !- Field 38 Until: 24:00,15.6; !- Field 39 Schedule:Compact, CLGSETP_SCH_YES_OPTIMUM, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 05:00,26.7, !- Field 3 Until: 06:00,25.7, !- Field 5 Until: 07:00,25.0, !- Field 7 Until: 22:00,24.0, !- Field 9 Until: 24:00,26.7, !- Field 11 For: Weekdays, !- Field 13 Until: 05:00,26.7, !- Field 14 Until: 06:00,25.6, !- Field 16 Until: 07:00,25.0, !- Field 18 Until: 22:00,24.0, !- Field 20 Until: 24:00,26.7, !- Field 22 For: Saturday, !- Field 24 Until: 05:00,26.7, !- Field 25 Until: 06:00,25.7, !- Field 27 Until: 07:00,25.0, !- Field 29 Until: 17:00,24.0, !- Field 31 Until: 24:00,26.7, !- Field 33 For WinterDesignDay, !- Field 35 Until: 24:00,26.7, !- Field 36 For:Sunday Holidays AllOtherDays, !- Field 38 Until: 24:00,26.7; !- Field 39 Schedule:Compact, CLGSETP_SCH_YES_OPTIMUM_ORIGINAL, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 05:00,26.7, !- Field 3 Until: 06:00,25.7, !- Field 5 Until: 07:00,25.0, !- Field 7 Until: 22:00,24.0, !- Field 9 Until: 24:00,26.7, !- Field 11 For: Weekdays, !- Field 13 Until: 05:00,26.7, !- Field 14 Until: 06:00,25.6, !- Field 16 Until: 07:00,25.0, !- Field 18 Until: 22:00,24.0, !- Field 20 Until: 24:00,26.7, !- Field 22 For: Saturday, !- Field 24 Until: 05:00,26.7, !- Field 25 Until: 06:00,25.7, !- Field 27 Until: 07:00,25.0, !- Field 29 Until: 17:00,24.0, !- Field 31 Until: 24:00,26.7, !- Field 33 For WinterDesignDay, !- Field 35 Until: 24:00,26.7, !- Field 36 For:Sunday Holidays AllOtherDays, !- Field 38 Until: 24:00,26.7; !- Field 39 Schedule:Compact, CLGSETP_SCH_YES_OPTIMUM_w_SB, !-Name Temperature, !-Schedule Type Limits Name Through: 12/31, For: Weekdays, Until: 01:00, 26.7, Until: 02:00, 26.7, Until: 03:00, 26.7, Until: 04:00, 26.7, Until: 05:00, 26.7, Until: 06:00, 25.6, Until: 07:00, 25, Until: 08:00, 24, Until: 09:00, 24, Until: 10:00, 24, Until: 11:00, 24.5555555555556, Until: 12:00, 24, Until: 13:00, 24.5555555555556, Until: 14:00, 24, Until: 15:00, 24.5555555555556, Until: 16:00, 24, Until: 17:00, 24, Until: 18:00, 24, Until: 19:00, 24, Until: 20:00, 24, Until: 21:00, 24, Until: 22:00, 24, Until: 23:00, 26.7, Until: 24:00, 26.7, For: Saturday, Until: 01:00, 26.7, Until: 02:00, 26.7, Until: 03:00, 26.7, Until: 04:00, 26.7, Until: 05:00, 26.7, Until: 06:00, 25.7, Until: 07:00, 25, Until: 08:00, 24, Until: 09:00, 24, Until: 10:00, 24, Until: 11:00, 24.5555555555556, Until: 12:00, 24, Until: 13:00, 24.5555555555556, Until: 14:00, 24, Until: 15:00, 24.5555555555556, Until: 16:00, 24, Until: 17:00, 24, Until: 18:00, 26.7, Until: 19:00, 26.7, Until: 20:00, 26.7, Until: 21:00, 26.7, Until: 22:00, 26.7, Until: 23:00, 26.7, Until: 24:00, 26.7, For: SummerDesignDay, Until: 05:00,26.7, Until: 06:00,25.7, Until: 07:00,25.0, Until: 22:00,24.0, Until: 24:00,26.7, For WinterDesignDay, Until: 24:00,26.7, For:Sunday Holidays AllOtherDays, Until: 24:00,26.7; Schedule:Compact, CLGSETP_SCH_NO_OPTIMUM, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 05:00,26.7, !- Field 3 Until: 06:00,25.7, !- Field 5 Until: 07:00,25.0, !- Field 7 Until: 22:00,24.0, !- Field 9 Until: 24:00,26.7, !- Field 11 For: Weekdays, !- Field 13 Until: 05:00,26.7, !- Field 14 Until: 06:00,24.0, !- Field 16 Until: 07:00,24.0, !- Field 18 Until: 22:00,24.0, !- Field 20 Until: 24:00,26.7, !- Field 22 For: Saturday, !- Field 24 Until: 05:00,26.7, !- Field 25 Until: 06:00,24.0, !- Field 27 Until: 07:00,24.0, !- Field 29 Until: 17:00,24.0, !- Field 31 Until: 24:00,26.7, !- Field 33 For WinterDesignDay, !- Field 35 Until: 24:00,26.7, !- Field 36 For:Sunday Holidays AllOtherDays, !- Field 38 Until: 24:00,26.7; !- Field 39 Schedule:Compact, CLGSETP_SCH_PACU_VAV_bot,!- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 05:00,26.7, !- Field 3 Until: 06:00,25.7, !- Field 5 Until: 07:00,25.0, !- Field 7 Until: 22:00,24.0, !- Field 9 Until: 24:00,26.7, !- Field 11 For: Weekdays, !- Field 13 Until: 05:00,26.7, !- Field 14 Until: 06:00,24.0, !- Field 16 Until: 07:00,24.0, !- Field 18 Until: 22:00,24.0, !- Field 20 Until: 24:00,26.7, !- Field 22 For: Saturday, !- Field 24 Until: 05:00,26.7, !- Field 25 Until: 06:00,24.0, !- Field 27 Until: 07:00,24.0, !- Field 29 Until: 17:00,24.0, !- Field 31 Until: 24:00,26.7, !- Field 33 For WinterDesignDay, !- Field 35 Until: 24:00,26.7, !- Field 36 For:Sunday Holidays AllOtherDays, !- Field 38 Until: 24:00,26.7; !- Field 39 Schedule:Compact, CLGSETP_SCH_PACU_VAV_mid,!- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 05:00,26.7, !- Field 3 Until: 06:00,25.7, !- Field 5 Until: 07:00,25.0, !- Field 7 Until: 22:00,24.0, !- Field 9 Until: 24:00,26.7, !- Field 11 For: Weekdays, !- Field 13 Until: 05:00,26.7, !- Field 14 Until: 06:00,24.0, !- Field 16 Until: 07:00,24.0, !- Field 18 Until: 22:00,24.0, !- Field 20 Until: 24:00,26.7, !- Field 22 For: Saturday, !- Field 24 Until: 05:00,26.7, !- Field 25 Until: 06:00,24.0, !- Field 27 Until: 07:00,24.0, !- Field 29 Until: 17:00,24.0, !- Field 31 Until: 24:00,26.7, !- Field 33 For WinterDesignDay, !- Field 35 Until: 24:00,26.7, !- Field 36 For:Sunday Holidays AllOtherDays, !- Field 38 Until: 24:00,26.7; !- Field 39 Schedule:Compact, CLGSETP_SCH_PACU_VAV_top,!- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 05:00,26.7, !- Field 3 Until: 06:00,25.7, !- Field 5 Until: 07:00,25.0, !- Field 7 Until: 22:00,24.0, !- Field 9 Until: 24:00,26.7, !- Field 11 For: Weekdays, !- Field 13 Until: 05:00,26.7, !- Field 14 Until: 06:00,24.0, !- Field 16 Until: 07:00,24.0, !- Field 18 Until: 22:00,24.0, !- Field 20 Until: 24:00,26.7, !- Field 22 For: Saturday, !- Field 24 Until: 05:00,26.7, !- Field 25 Until: 06:00,24.0, !- Field 27 Until: 07:00,24.0, !- Field 29 Until: 17:00,24.0, !- Field 31 Until: 24:00,26.7, !- Field 33 For WinterDesignDay, !- Field 35 Until: 24:00,26.7, !- Field 36 For:Sunday Holidays AllOtherDays, !- Field 38 Until: 24:00,26.7; !- Field 39 Schedule:Compact, CLGSETP_SCH_NO_SETBACK, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 05:00,26.7, !- Field 3 Until: 06:00,25.7, !- Field 5 Until: 07:00,25.0, !- Field 7 Until: 22:00,24.0, !- Field 9 Until: 24:00,26.7, !- Field 11 For: Weekdays, !- Field 13 Until: 05:00,24.0, !- Field 14 Until: 06:00,24.0, !- Field 16 Until: 07:00,24.0, !- Field 18 Until: 22:00,24.0, !- Field 20 Until: 24:00,24.0, !- Field 22 For: Saturday, !- Field 24 Until: 05:00,24.0, !- Field 25 Until: 06:00,24.0, !- Field 27 Until: 07:00,24.0, !- Field 29 Until: 17:00,24.0, !- Field 31 Until: 24:00,24.0, !- Field 33 For WinterDesignDay, !- Field 35 Until: 24:00,24.0, !- Field 36 For:Sunday Holidays AllOtherDays, !- Field 38 Until: 24:00,24.0; !- Field 39 Schedule:Compact, Humidity Setpoint Schedule, !- Name Humidity, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 24:00,50, !- Field 3 For: Saturday WinterDesignDay, !- Field 5 Until: 24:00,50, !- Field 6 For:Sunday Holidays AllOtherDays, !- Field 8 Until: 24:00,50; !- Field 9 Schedule:Compact, MinOA_MotorizedDamper_Sched, !- Name fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 07:00,0.0, !- Field 3 Until: 22:00,1.0, !- Field 5 Until: 24:00,0.0, !- Field 7 For: Saturday WinterDesignDay, !- Field 9 Until: 07:00,0.0, !- Field 10 Until: 18:00,1.0, !- Field 12 Until: 24:00,0.0, !- Field 14 For:Sunday Holidays AllOtherDays, !- Field 16 Until: 24:00,0.0; !- Field 17 Schedule:Compact, MinOA_Sched, !- Name fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1.0; !- Field 3 Schedule:Compact, Dual Zone Control Type Sched, !- Name Control Type, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,4; !- Field 3 Schedule:Compact, Supply-Air-Temp-Sch,!- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,12.8; !- Field 3 Schedule:Compact, CW-Loop-Temp-Schedule, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,6.7; !- Field 3 Schedule:Compact, HW-Loop-Temp-Schedule, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.; !- Field 3 Schedule:Compact, Core_bottom sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, Core_bottom sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, Core_bottom sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, Core_bottom sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, Core_mid sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, Core_mid sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, Core_mid sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, Core_mid sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, Core_top sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, Core_top sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, Core_top sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, Core_top sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, Perimeter_top_ZN_3 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, Perimeter_top_ZN_3 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, Perimeter_top_ZN_3 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, Perimeter_top_ZN_3 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, Perimeter_top_ZN_2 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, Perimeter_top_ZN_2 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, Perimeter_top_ZN_2 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, Perimeter_top_ZN_2 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, Perimeter_top_ZN_1 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, Perimeter_top_ZN_1 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, Perimeter_top_ZN_1 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, Perimeter_top_ZN_1 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, Perimeter_top_ZN_4 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, Perimeter_top_ZN_4 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, Perimeter_top_ZN_4 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, Perimeter_top_ZN_4 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, Perimeter_bot_ZN_3 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, Perimeter_bot_ZN_3 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, Perimeter_bot_ZN_3 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, Perimeter_bot_ZN_3 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, Perimeter_bot_ZN_2 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, Perimeter_bot_ZN_2 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, Perimeter_bot_ZN_2 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, Perimeter_bot_ZN_2 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, Perimeter_bot_ZN_1 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, Perimeter_bot_ZN_1 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, Perimeter_bot_ZN_1 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, Perimeter_bot_ZN_1 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, Perimeter_bot_ZN_4 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, Perimeter_bot_ZN_4 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, Perimeter_bot_ZN_4 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, Perimeter_bot_ZN_4 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, Perimeter_mid_ZN_3 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, Perimeter_mid_ZN_3 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, Perimeter_mid_ZN_3 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, Perimeter_mid_ZN_3 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, Perimeter_mid_ZN_2 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, Perimeter_mid_ZN_2 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, Perimeter_mid_ZN_2 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, Perimeter_mid_ZN_2 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, Perimeter_mid_ZN_1 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, Perimeter_mid_ZN_1 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, Perimeter_mid_ZN_1 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, Perimeter_mid_ZN_1 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, Perimeter_mid_ZN_4 sub cat Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, Perimeter_mid_ZN_4 sub cat Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, Perimeter_mid_ZN_4 sub cat Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, Perimeter_mid_ZN_4 sub catHot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, SHWSys1-Loop-Temp-Schedule, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, SHWSys1 Water Heater Setpoint Temperature Schedule, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, SHWSys1 Water Heater Ambient Temperature Schedule, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,22.0; !- Field 3 Schedule:Compact, INFIL_SCH_PNNL, !- Name fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 06:00,1.0, !- Field 3 Until: 22:00,0.25, !- Field 5 Until: 24:00,1.0, !- Field 7 For: Saturday WinterDesignDay, !- Field 9 Until: 06:00,1.0, !- Field 10 Until: 18:00,0.25, !- Field 12 Until: 24:00,1.0, !- Field 14 For:Sunday Holidays AllOtherDays, !- Field 16 Until: 24:00,1.0; !- Field 17 Schedule:Compact, INFIL_Door_Opening_SCH, !- Name fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 06:00,0.0, !- Field 3 Until: 07:00,0.131, !- Field 5 Until: 08:00,1.0, !- Field 7 Until: 12:00,0.131, !- Field 9 Until: 13:00,1.0, !- Field 11 Until: 17:00,0.131, !- Field 13 Until: 18:00,1.0, !- Field 15 Until: 19:00,0.131, !- Field 17 Until: 24:00,0.0, !- Field 19 For: Saturday Sunday Holidays AllOtherDays, !- Field 21 Until: 24:00,0.0; !- Field 22 Schedule:Compact, PERIMETER_MID_ZN_2_MDP_Sch, !-Name Fraction, !-Schedule Type Limits Name Through: 12/31, For: Weekdays, Until: 01:00, 0.111, Until: 02:00, 0.111, Until: 03:00, 0.111, Until: 04:00, 0.111, Until: 05:00, 0.111, Until: 06:00, 0.111, Until: 07:00, 0.111, Until: 08:00, 0.111, Until: 09:00, 0.111, Until: 10:00, 0.111, Until: 11:00, 0.01, Until: 12:00, 0.111, Until: 13:00, 0.01, Until: 14:00, 0.111, Until: 15:00, 0.01, Until: 16:00, 0.111, Until: 17:00, 0.111, Until: 18:00, 0.111, Until: 19:00, 0.111, Until: 20:00, 0.111, Until: 21:00, 0.111, Until: 22:00, 0.111, Until: 23:00, 0.111, Until: 24:00, 0.111, For: Saturday, Until: 01:00, 0.111, Until: 02:00, 0.111, Until: 03:00, 0.111, Until: 04:00, 0.111, Until: 05:00, 0.111, Until: 06:00, 0.111, Until: 07:00, 0.111, Until: 08:00, 0.111, Until: 09:00, 0.111, Until: 10:00, 0.111, Until: 11:00, 0.01, Until: 12:00, 0.111, Until: 13:00, 0.01, Until: 14:00, 0.111, Until: 15:00, 0.01, Until: 16:00, 0.111, Until: 17:00, 0.111, Until: 18:00, 0.111, Until: 19:00, 0.111, Until: 20:00, 0.111, Until: 21:00, 0.111, Until: 22:00, 0.111, Until: 23:00, 0.111, Until: 24:00, 0.111, For: AllOtherDays, Until: 24:00, 0.111; Schedule:Compact, PERIMETER_MID_ZN_2_OA_Mult, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 01:00, !- Field 3 1, !- Field 4 Until: 02:00, !- Field 5 1, !- Field 6 Until: 03:00, !- Field 7 1, !- Field 8 Until: 04:00, !- Field 9 1, !- Field 10 Until: 05:00, !- Field 11 1, !- Field 12 Until: 06:00, !- Field 13 1, !- Field 14 Until: 07:00, !- Field 15 1, !- Field 16 Until: 08:00, !- Field 17 1, !- Field 18 Until: 09:00, !- Field 19 1, !- Field 20 Until: 10:00, !- Field 21 1, !- Field 22 Until: 11:00, !- Field 23 0, !- Field 24 Until: 12:00, !- Field 25 1, !- Field 26 Until: 13:00, !- Field 27 0, !- Field 28 Until: 14:00, !- Field 29 1, !- Field 30 Until: 15:00, !- Field 31 0, !- Field 32 Until: 16:00, !- Field 33 1, !- Field 34 Until: 17:00, !- Field 35 1, !- Field 36 Until: 18:00, !- Field 37 1, !- Field 38 Until: 19:00, !- Field 39 1, !- Field 40 Until: 20:00, !- Field 41 1, !- Field 42 Until: 21:00, !- Field 43 1, !- Field 44 Until: 22:00, !- Field 45 1, !- Field 46 Until: 23:00, !- Field 47 1, !- Field 48 Until: 24:00, !- Field 49 1, !- Field 50 For: Saturday, !- Field 51 Until: 01:00, !- Field 52 1, !- Field 53 Until: 02:00, !- Field 54 1, !- Field 55 Until: 03:00, !- Field 56 1, !- Field 57 Until: 04:00, !- Field 58 1, !- Field 59 Until: 05:00, !- Field 60 1, !- Field 61 Until: 06:00, !- Field 62 1, !- Field 63 Until: 07:00, !- Field 64 1, !- Field 65 Until: 08:00, !- Field 66 1, !- Field 67 Until: 09:00, !- Field 68 1, !- Field 69 Until: 10:00, !- Field 70 1, !- Field 71 Until: 11:00, !- Field 72 0, !- Field 73 Until: 12:00, !- Field 74 1, !- Field 75 Until: 13:00, !- Field 76 0, !- Field 77 Until: 14:00, !- Field 78 1, !- Field 79 Until: 15:00, !- Field 80 0, !- Field 81 Until: 16:00, !- Field 82 1, !- Field 83 Until: 17:00, !- Field 84 1, !- Field 85 Until: 18:00, !- Field 86 1, !- Field 87 Until: 19:00, !- Field 88 1, !- Field 89 Until: 20:00, !- Field 90 1, !- Field 91 Until: 21:00, !- Field 92 1, !- Field 93 Until: 22:00, !- Field 94 1, !- Field 95 Until: 23:00, !- Field 96 1, !- Field 97 Until: 24:00, !- Field 98 1, !- Field 99 For: AllOtherDays, !- Field 100 Until: 24:00, !- Field 101 1; !- Field 102 Schedule:Constant, VAV_BOT Max OA Fraction, !- Name , !- Schedule Type Limits Name 1.0; !- Hourly Value Schedule:Constant, VAV_MID Max OA Fraction, !- Name , !- Schedule Type Limits Name 1.0; !- Hourly Value Schedule:Constant, VAV_TOP Max OA Fraction, !- Name , !- Schedule Type Limits Name 1.0; !- Hourly Value !- =========== ALL OBJECTS IN CLASS: PEOPLE =========== People, Core_bottom, !- Name Core_bottom, !- Zone or ZoneList Name BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 18.5787942465724, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Core_mid, !- Name Core_mid, !- Zone or ZoneList Name BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 18.5787942465724, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Core_top, !- Name Core_top, !- Zone or ZoneList Name BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 18.5787942465724, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Perimeter_top_ZN_3, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 18.5787942465724, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Perimeter_top_ZN_2, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 18.5787942465724, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Perimeter_top_ZN_1, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 18.5787942465724, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Perimeter_top_ZN_4, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 18.5787942465724, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Perimeter_bot_ZN_3, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 18.5787942465724, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Perimeter_bot_ZN_2, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 18.5787942465724, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Perimeter_bot_ZN_1, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 18.5787942465724, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Perimeter_bot_ZN_4, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 18.5787942465724, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Perimeter_mid_ZN_3, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 18.5787942465724, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Perimeter_mid_ZN_2, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name BLDG_OCC_SCH_w_SB, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 18.5787942465724, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Perimeter_mid_ZN_1, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 18.5787942465724, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Perimeter_mid_ZN_4, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 18.5787942465724, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type !- =========== ALL OBJECTS IN CLASS: LIGHTS =========== Lights, Core_bottom_Lights, !- Name Core_bottom, !- Zone or ZoneList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.888902667, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Core_mid_Lights, !- Name Core_mid, !- Zone or ZoneList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.888902667, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Core_top_Lights, !- Name Core_top, !- Zone or ZoneList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.888902667, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Perimeter_top_ZN_3_Lights, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.888902667, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Perimeter_top_ZN_2_Lights, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.888902667, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Perimeter_top_ZN_1_Lights, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.888902667, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Perimeter_top_ZN_4_Lights, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.888902667, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Perimeter_bot_ZN_3_Lights, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.888902667, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Perimeter_bot_ZN_2_Lights, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.888902667, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Perimeter_bot_ZN_1_Lights, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.888902667, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Perimeter_bot_ZN_4_Lights, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.888902667, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Perimeter_mid_ZN_3_Lights, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.888902667, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Perimeter_mid_ZN_2_Lights, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.888902667, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Perimeter_mid_ZN_1_Lights, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.888902667, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Perimeter_mid_ZN_4_Lights, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.888902667, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature !- =========== ALL OBJECTS IN CLASS: ELECTRIC EQUIPMENT =========== ElectricEquipment, Core_bottom_MiscPlug_Equip, !- Name Core_bottom, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 7937.1558, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Core_mid_MiscPlug_Equip, !- Name Core_mid, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 7937.1558, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Core_top_MiscPlug_Equip, !- Name Core_top, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 7937.1558, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Perimeter_top_ZN_3_MiscPlug_Equip, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1673.2138, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Perimeter_top_ZN_2_MiscPlug_Equip, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1059.2170, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Perimeter_top_ZN_1_MiscPlug_Equip, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1673.2028, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Perimeter_top_ZN_4_MiscPlug_Equip, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1059.2100, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Perimeter_bot_ZN_3_MiscPlug_Equip, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1673.2138, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Perimeter_bot_ZN_2_MiscPlug_Equip, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1059.2170, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Perimeter_bot_ZN_1_MiscPlug_Equip, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1673.2028, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Perimeter_bot_ZN_4_MiscPlug_Equip, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1059.2100, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Perimeter_mid_ZN_3_MiscPlug_Equip, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1673.2138, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Perimeter_mid_ZN_2_MiscPlug_Equip, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1059.2170, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Perimeter_mid_ZN_1_MiscPlug_Equip, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1673.2028, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Perimeter_mid_ZN_4_MiscPlug_Equip, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1059.2100, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Core_bottom_Elevators_Equip, !- Name Core_bottom, !- Zone or ZoneList Name BLDG_ELEVATORS, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 32109.8901098901, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost ElevatorLift; !- End-Use Subcategory ElectricEquipment, Elevators_Lights_Fan, !- Name Core_bottom, !- Zone or ZoneList Name ELEV_LIGHT_FAN_SCH_ADD_DF, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 125, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost ElevatorLightsFan; !- End-Use Subcategory !- =========== ALL OBJECTS IN CLASS: EXTERIORLIGHTS =========== Exterior:Lights, Exterior_Lights_a, !- Name Exterior_lighting_schedule_a, !- Schedule Name 519.2, !- Design Level {W} AstronomicalClock, !- Control Option General; !- End-Use Subcategory Exterior:Lights, Exterior_Lights_b, !- Name Exterior_lighting_schedule_b_2016, !- Schedule Name 375.7, !- Design Level {W} AstronomicalClock, !- Control Option General; !- End-Use Subcategory Exterior:Lights, Exterior_Lights_c, !- Name Exterior_lighting_schedule_c_2016, !- Schedule Name 4341.6, !- Design Level {W} AstronomicalClock, !- Control Option General; !- End-Use Subcategory !- =========== ALL OBJECTS IN CLASS: DAYLIGHTING:CONTROLS =========== Daylighting:Controls, Perimeter_bot_ZN_1_DaylCtrl, !- Name Perimeter_bot_ZN_1, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Perimeter_bot_ZN_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Perimeter_bot_ZN_1_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.3835, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Perimeter_bot_ZN_1_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.1395, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Perimeter_bot_ZN_1_DaylRefPt1, !- Name Perimeter_bot_ZN_1, !- Zone Name 24.955500, !- X-Coordinate of Reference Point {m} 1.524000, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Perimeter_bot_ZN_1_DaylRefPt2, !- Name Perimeter_bot_ZN_1, !- Zone Name 24.955500, !- X-Coordinate of Reference Point {m} 3.048000, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Perimeter_bot_ZN_2_DaylCtrl, !- Name Perimeter_bot_ZN_2, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Perimeter_bot_ZN_2_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 90.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Perimeter_bot_ZN_2_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.3835, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Perimeter_bot_ZN_2_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.1395, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Perimeter_bot_ZN_2_DaylRefPt1, !- Name Perimeter_bot_ZN_2, !- Zone Name 48.387000, !- X-Coordinate of Reference Point {m} 16.636900, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Perimeter_bot_ZN_2_DaylRefPt2, !- Name Perimeter_bot_ZN_2, !- Zone Name 46.863000, !- X-Coordinate of Reference Point {m} 16.636900, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Perimeter_bot_ZN_3_DaylCtrl, !- Name Perimeter_bot_ZN_3, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Perimeter_bot_ZN_3_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Perimeter_bot_ZN_3_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.3835, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Perimeter_bot_ZN_3_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.1395, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Perimeter_bot_ZN_3_DaylRefPt1, !- Name Perimeter_bot_ZN_3, !- Zone Name 24.955500, !- X-Coordinate of Reference Point {m} 31.749800, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Perimeter_bot_ZN_3_DaylRefPt2, !- Name Perimeter_bot_ZN_3, !- Zone Name 24.955500, !- X-Coordinate of Reference Point {m} 30.225800, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Perimeter_bot_ZN_4_DaylCtrl, !- Name Perimeter_bot_ZN_4, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Perimeter_bot_ZN_4_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 270.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Perimeter_bot_ZN_4_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.3835, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Perimeter_bot_ZN_4_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.1395, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Perimeter_bot_ZN_4_DaylRefPt1, !- Name Perimeter_bot_ZN_4, !- Zone Name 1.524000, !- X-Coordinate of Reference Point {m} 16.636900, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Perimeter_bot_ZN_4_DaylRefPt2, !- Name Perimeter_bot_ZN_4, !- Zone Name 3.048000, !- X-Coordinate of Reference Point {m} 16.636900, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Perimeter_mid_ZN_1_DaylCtrl, !- Name Perimeter_mid_ZN_1, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Perimeter_mid_ZN_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Perimeter_mid_ZN_1_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.3835, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Perimeter_mid_ZN_1_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.1395, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Perimeter_mid_ZN_1_DaylRefPt1, !- Name Perimeter_mid_ZN_1, !- Zone Name 24.955500, !- X-Coordinate of Reference Point {m} 1.524000, !- Y-Coordinate of Reference Point {m} 4.724400; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Perimeter_mid_ZN_1_DaylRefPt2, !- Name Perimeter_mid_ZN_1, !- Zone Name 24.955500, !- X-Coordinate of Reference Point {m} 3.048000, !- Y-Coordinate of Reference Point {m} 4.724400; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Perimeter_mid_ZN_2_DaylCtrl, !- Name Perimeter_mid_ZN_2, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Perimeter_mid_ZN_2_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 90.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Perimeter_mid_ZN_2_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.3835, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Perimeter_mid_ZN_2_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.1395, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Perimeter_mid_ZN_2_DaylRefPt1, !- Name Perimeter_mid_ZN_2, !- Zone Name 48.387000, !- X-Coordinate of Reference Point {m} 16.636900, !- Y-Coordinate of Reference Point {m} 4.724400; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Perimeter_mid_ZN_2_DaylRefPt2, !- Name Perimeter_mid_ZN_2, !- Zone Name 46.863000, !- X-Coordinate of Reference Point {m} 16.636900, !- Y-Coordinate of Reference Point {m} 4.724400; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Perimeter_mid_ZN_3_DaylCtrl, !- Name Perimeter_mid_ZN_3, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Perimeter_mid_ZN_3_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Perimeter_mid_ZN_3_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.3835, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Perimeter_mid_ZN_3_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.1395, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Perimeter_mid_ZN_3_DaylRefPt1, !- Name Perimeter_mid_ZN_3, !- Zone Name 24.955500, !- X-Coordinate of Reference Point {m} 31.749800, !- Y-Coordinate of Reference Point {m} 4.724400; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Perimeter_mid_ZN_3_DaylRefPt2, !- Name Perimeter_mid_ZN_3, !- Zone Name 24.955500, !- X-Coordinate of Reference Point {m} 30.225800, !- Y-Coordinate of Reference Point {m} 4.724400; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Perimeter_mid_ZN_4_DaylCtrl, !- Name Perimeter_mid_ZN_4, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Perimeter_mid_ZN_4_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 270.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Perimeter_mid_ZN_4_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.3835, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Perimeter_mid_ZN_4_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.1395, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Perimeter_mid_ZN_4_DaylRefPt1, !- Name Perimeter_mid_ZN_4, !- Zone Name 1.524000, !- X-Coordinate of Reference Point {m} 16.636900, !- Y-Coordinate of Reference Point {m} 4.724400; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Perimeter_mid_ZN_4_DaylRefPt2, !- Name Perimeter_mid_ZN_4, !- Zone Name 3.048000, !- X-Coordinate of Reference Point {m} 16.636900, !- Y-Coordinate of Reference Point {m} 4.724400; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Perimeter_top_ZN_1_DaylCtrl, !- Name Perimeter_top_ZN_1, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Perimeter_top_ZN_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Perimeter_top_ZN_1_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.3835, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Perimeter_top_ZN_1_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.1395, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Perimeter_top_ZN_1_DaylRefPt1, !- Name Perimeter_top_ZN_1, !- Zone Name 24.955500, !- X-Coordinate of Reference Point {m} 1.524000, !- Y-Coordinate of Reference Point {m} 8.687000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Perimeter_top_ZN_1_DaylRefPt2, !- Name Perimeter_top_ZN_1, !- Zone Name 24.955500, !- X-Coordinate of Reference Point {m} 3.048000, !- Y-Coordinate of Reference Point {m} 8.687000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Perimeter_top_ZN_2_DaylCtrl, !- Name Perimeter_top_ZN_2, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Perimeter_top_ZN_2_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 90.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Perimeter_top_ZN_2_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.3835, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Perimeter_top_ZN_2_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.1395, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Perimeter_top_ZN_2_DaylRefPt1, !- Name Perimeter_top_ZN_2, !- Zone Name 48.387000, !- X-Coordinate of Reference Point {m} 16.636900, !- Y-Coordinate of Reference Point {m} 8.687000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Perimeter_top_ZN_2_DaylRefPt2, !- Name Perimeter_top_ZN_2, !- Zone Name 46.863000, !- X-Coordinate of Reference Point {m} 16.636900, !- Y-Coordinate of Reference Point {m} 8.687000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Perimeter_top_ZN_3_DaylCtrl, !- Name Perimeter_top_ZN_3, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Perimeter_top_ZN_3_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Perimeter_top_ZN_3_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.3835, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Perimeter_top_ZN_3_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.1395, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Perimeter_top_ZN_3_DaylRefPt1, !- Name Perimeter_top_ZN_3, !- Zone Name 24.955500, !- X-Coordinate of Reference Point {m} 31.749800, !- Y-Coordinate of Reference Point {m} 8.687000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Perimeter_top_ZN_3_DaylRefPt2, !- Name Perimeter_top_ZN_3, !- Zone Name 24.955500, !- X-Coordinate of Reference Point {m} 30.225800, !- Y-Coordinate of Reference Point {m} 8.687000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Perimeter_top_ZN_4_DaylCtrl, !- Name Perimeter_top_ZN_4, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Perimeter_top_ZN_4_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 270.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Perimeter_top_ZN_4_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.3835, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Perimeter_top_ZN_4_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.1395, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Perimeter_top_ZN_4_DaylRefPt1, !- Name Perimeter_top_ZN_4, !- Zone Name 1.524000, !- X-Coordinate of Reference Point {m} 16.636900, !- Y-Coordinate of Reference Point {m} 8.687000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Perimeter_top_ZN_4_DaylRefPt2, !- Name Perimeter_top_ZN_4, !- Zone Name 3.048000, !- X-Coordinate of Reference Point {m} 16.636900, !- Y-Coordinate of Reference Point {m} 8.687000; !- Z-Coordinate of Reference Point {m} !- =========== ALL OBJECTS IN CLASS: INFILTRATION =========== ZoneInfiltration:DesignFlowRate, Perimeter_top_ZN_3_Infiltration, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method 0, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Perimeter_top_ZN_2_Infiltration, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method 0, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Perimeter_top_ZN_1_Infiltration, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method 0, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Perimeter_top_ZN_4_Infiltration, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method 0, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Perimeter_bot_ZN_3_Infiltration, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method 0, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Perimeter_bot_ZN_2_Infiltration, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method 0, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Perimeter_bot_ZN_1_Infiltration, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method 0, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Perimeter_bot_ZN_1_Door_Infiltration, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name INFIL_Door_Opening_SCH, !- Schedule Name Flow/Zone, !- Design Flow Rate Calculation Method 0.678659786, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} , !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1.0, !- Constant Term Coefficient 0.0, !- Temperature Term Coefficient 0.0, !- Velocity Term Coefficient 0.0; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Perimeter_bot_ZN_4_Infiltration, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method 0, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Perimeter_mid_ZN_3_Infiltration, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method 0, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Perimeter_mid_ZN_2_Infiltration, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method 0, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Perimeter_mid_ZN_1_Infiltration, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method 0, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Perimeter_mid_ZN_4_Infiltration, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method 0, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, FirstFloor_Plenum_Infiltration, !- Name FirstFloor_Plenum, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method 0, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, MidFloor_Plenum_Infiltration, !- Name MidFloor_Plenum, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method 0, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, TopFloor_Plenum_Infiltration, !- Name TopFloor_Plenum, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method 0, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 6.19256064e-05, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient !- =========== ALL OBJECTS IN CLASS: SIZING PARAMETERS =========== Sizing:Parameters, 1.0, !- Heating Sizing Factor 1.0, !- Cooling Sizing Factor 6; !- Timesteps in Averaging Window !- =========== ALL OBJECTS IN CLASS: ZONE SIZING =========== Sizing:Zone, Core_bottom, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Core_bottom, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Core_bottom, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Core_mid, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Core_mid, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Core_mid, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Core_top, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Core_top, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Core_top, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Perimeter_top_ZN_3, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Perimeter_top_ZN_3, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Perimeter_top_ZN_3, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Perimeter_top_ZN_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Perimeter_top_ZN_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Perimeter_top_ZN_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Perimeter_top_ZN_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Perimeter_top_ZN_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Perimeter_top_ZN_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Perimeter_top_ZN_4, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Perimeter_top_ZN_4, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Perimeter_top_ZN_4, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Perimeter_bot_ZN_3, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Perimeter_bot_ZN_3, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Perimeter_bot_ZN_3, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Perimeter_bot_ZN_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Perimeter_bot_ZN_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Perimeter_bot_ZN_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Perimeter_bot_ZN_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Perimeter_bot_ZN_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Perimeter_bot_ZN_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Perimeter_bot_ZN_4, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Perimeter_bot_ZN_4, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Perimeter_bot_ZN_4, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Perimeter_mid_ZN_3, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Perimeter_mid_ZN_3, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Perimeter_mid_ZN_3, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Perimeter_mid_ZN_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Perimeter_mid_ZN_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Perimeter_mid_ZN_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Outdoor Air Flow per Zone {m3/s} , !- Outdoor Air Flow Air Changes per Hour PERIMETER_MID_ZN_2_OA_Mult; !- Outdoor Air Schedule Name Sizing:Zone, Perimeter_mid_ZN_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Perimeter_mid_ZN_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Perimeter_mid_ZN_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Perimeter_mid_ZN_4, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Perimeter_mid_ZN_4, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Perimeter_mid_ZN_4, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0; !- Outdoor Air Flow per Zone {m3/s} DesignSpecification:ZoneAirDistribution, VAV_Zone_AirDistribution, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} , !- Zone Air Distribution Effectiveness Schedule Name , !- Zone Secondary Recirculation Fraction {dimensionless} 0.6; !- Minimum Zone Ventilation Efficiency {dimensionless} !- =========== ALL OBJECTS IN CLASS: SYSTEM SIZING =========== Sizing:System, PACU_VAV_bot, !- AirLoop Name Sensible, !- Type of Load to Size On 0.9561, !- Design Outdoor Air Flow Rate {m3/s} 0.3000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 12.8000, !- Central Heating Design Supply Air Temperature {C} Coincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum; !- System Outdoor Air Method Sizing:System, PACU_VAV_mid, !- AirLoop Name Sensible, !- Type of Load to Size On 0.9561, !- Design Outdoor Air Flow Rate {m3/s} 0.3000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 12.8000, !- Central Heating Design Supply Air Temperature {C} Coincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum; !- System Outdoor Air Method Sizing:System, PACU_VAV_top, !- AirLoop Name Sensible, !- Type of Load to Size On 0.9561, !- Design Outdoor Air Flow Rate {m3/s} 0.3000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 12.8000, !- Central Heating Design Supply Air Temperature {C} Coincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum; !- System Outdoor Air Method !- =========== ALL OBJECTS IN CLASS: PLANT SIZING =========== Sizing:Plant, SHWSys1, !- Plant or Condenser Loop Name Heating, !- Loop Type 60, !- Design Loop Exit Temperature {C} !- this is changed from 48.9 to 60 to fix the warning message. 5.0; !- Loop Design Temperature Difference {deltaC} !- =========== ALL OBJECTS IN CLASS: CURVE:BIQUADRATIC =========== Curve:Biquadratic, FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_CapFT, !- Name 1.39072, !- Coefficient1 Constant -0.0529058, !- Coefficient2 x 0.0018423, !- Coefficient3 x**2 0.00058267, !- Coefficient4 y -0.000186814, !- Coefficient5 y**2 0.000265159, !- Coefficient6 x*y 16.5556, !- Minimum Value of x 22.1111, !- Maximum Value of x 23.7778, !- Minimum Value of y 47.66; !- Maximum Value of y Curve:Biquadratic, FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_EIRFT, !- Name -0.536161, !- Coefficient1 Constant 0.105138, !- Coefficient2 x -0.00172659, !- Coefficient3 x**2 0.0149848, !- Coefficient4 y 0.000659948, !- Coefficient5 y**2 -0.0017385, !- Coefficient6 x*y 16.5556, !- Minimum Value of x 22.1111, !- Maximum Value of x 23.7778, !- Minimum Value of y 47.66; !- Maximum Value of y !- =========== ALL OBJECTS IN CLASS: CURVE:QUADRATIC =========== Curve:Quadratic, FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_FFF, !- Name 0.718954, !- Coefficient1 Constant 0.435436, !- Coefficient2 x -0.154193, !- Coefficient3 x**2 0.75, !- Minimum Value of x 1.25; !- Maximum Value of x Curve:Quadratic, FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_EIRFFF, !- Name 1.19525, !- Coefficient1 Constant -0.306138, !- Coefficient2 x 0.110973, !- Coefficient3 x**2 0.75, !- Minimum Value of x 1.25; !- Maximum Value of x Curve:Quadratic, FURNACE_PACU_VAV_CoolCIEA_HVAC_BESTEST_9ton-PLR, !- Name 0.771, !- Coefficient1 Constant 0.229, !- Coefficient2 x 0.0, !- Coefficient3 x**2 0.0, !- Minimum Value of x 1.0; !- Maximum Value of x !- =========== ALL OBJECTS IN CLASS: NODE LIST =========== NodeList, Core_bottom Inlet Nodes, !- Name Core_bottom VAV Box Outlet Node; !- Node 1 Name NodeList, Core_mid Inlet Nodes, !- Name Core_mid VAV Box Outlet Node; !- Node 1 Name NodeList, Core_top Inlet Nodes, !- Name Core_top VAV Box Outlet Node; !- Node 1 Name NodeList, Perimeter_top_ZN_3 Inlet Nodes, !- Name Perimeter_top_ZN_3 VAV Box Outlet Node; !- Node 1 Name NodeList, Perimeter_top_ZN_2 Inlet Nodes, !- Name Perimeter_top_ZN_2 VAV Box Outlet Node; !- Node 1 Name NodeList, Perimeter_top_ZN_1 Inlet Nodes, !- Name Perimeter_top_ZN_1 VAV Box Outlet Node; !- Node 1 Name NodeList, Perimeter_top_ZN_4 Inlet Nodes, !- Name Perimeter_top_ZN_4 VAV Box Outlet Node; !- Node 1 Name NodeList, Perimeter_bot_ZN_3 Inlet Nodes, !- Name Perimeter_bot_ZN_3 VAV Box Outlet Node; !- Node 1 Name NodeList, Perimeter_bot_ZN_2 Inlet Nodes, !- Name Perimeter_bot_ZN_2 VAV Box Outlet Node; !- Node 1 Name NodeList, Perimeter_bot_ZN_1 Inlet Nodes, !- Name Perimeter_bot_ZN_1 VAV Box Outlet Node; !- Node 1 Name NodeList, Perimeter_bot_ZN_4 Inlet Nodes, !- Name Perimeter_bot_ZN_4 VAV Box Outlet Node; !- Node 1 Name NodeList, Perimeter_mid_ZN_3 Inlet Nodes, !- Name Perimeter_mid_ZN_3 VAV Box Outlet Node; !- Node 1 Name NodeList, Perimeter_mid_ZN_2 Inlet Nodes, !- Name Perimeter_mid_ZN_2 VAV Box Outlet Node; !- Node 1 Name NodeList, Perimeter_mid_ZN_1 Inlet Nodes, !- Name Perimeter_mid_ZN_1 VAV Box Outlet Node; !- Node 1 Name NodeList, Perimeter_mid_ZN_4 Inlet Nodes, !- Name Perimeter_mid_ZN_4 VAV Box Outlet Node; !- Node 1 Name NodeList, PACU_VAV_bot_OANode List,!- Name PACU_VAV_bot_OAInlet Node; !- Node 1 Name NodeList, PACU_VAV_mid_OANode List,!- Name PACU_VAV_mid_OAInlet Node; !- Node 1 Name NodeList, PACU_VAV_top_OANode List,!- Name PACU_VAV_top_OAInlet Node; !- Node 1 Name !- =========== ALL OBJECTS IN CLASS: BRANCH LIST =========== BranchList, PACU_VAV_bot Air Loop Branches, !- Name PACU_VAV_bot Air Loop Main Branch; !- Branch 1 Name BranchList, PACU_VAV_mid Air Loop Branches, !- Name PACU_VAV_mid Air Loop Main Branch; !- Branch 1 Name BranchList, PACU_VAV_top Air Loop Branches, !- Name PACU_VAV_top Air Loop Main Branch; !- Branch 1 Name BranchList, SHWSys1 Supply Branches, !- Name SHWSys1 Supply Inlet Branch, !- Branch 1 Name SHWSys1 Supply Equipment Branch, !- Branch 2 Name SHWSys1 Supply Equipment Bypass Branch, !- Branch 3 Name SHWSys1 Supply Outlet Branch; !- Branch 4 Name BranchList, SHWSys1 Demand Branches, !- Name SHWSys1 Demand Inlet Branch, !- Branch 1 Name SHWSys1 Demand Load Branch 1, !- Branch 2 Name SHWSys1 Demand Load Branch 2, !- Branch 3 Name SHWSys1 Demand Load Branch 3, !- Branch 4 Name SHWSys1 Demand Load Branch 4, !- Branch 5 Name SHWSys1 Demand Load Branch 5, !- Branch 6 Name SHWSys1 Demand Load Branch 6, !- Branch 7 Name SHWSys1 Demand Load Branch 7, !- Branch 8 Name SHWSys1 Demand Load Branch 8, !- Branch 9 Name SHWSys1 Demand Load Branch 9, !- Branch 10 Name SHWSys1 Demand Load Branch 10, !- Branch 11 Name SHWSys1 Demand Load Branch 11, !- Branch 12 Name SHWSys1 Demand Load Branch 12, !- Branch 13 Name SHWSys1 Demand Load Branch 13, !- Branch 14 Name SHWSys1 Demand Load Branch 14, !- Branch 15 Name SHWSys1 Demand Load Branch 15, !- Branch 16 Name SHWSys1 Demand Bypass Branch, !- Branch 17 Name SHWSys1 Demand Outlet Branch; !- Branch 18 Name !- =========== ALL OBJECTS IN CLASS: CONNECTOR LIST =========== ConnectorList, SHWSys1 Supply Connectors, !- Name Connector:Splitter, !- Connector 1 Object Type SHWSys1 Supply Splitter, !- Connector 1 Name Connector:Mixer, !- Connector 2 Object Type SHWSys1 Supply Mixer; !- Connector 2 Name ConnectorList, SHWSys1 Demand Connectors, !- Name Connector:Splitter, !- Connector 1 Object Type SHWSys1 Demand Splitter, !- Connector 1 Name Connector:Mixer, !- Connector 2 Object Type SHWSys1 Demand Mixer; !- Connector 2 Name !- =========== ALL OBJECTS IN CLASS: BRANCH =========== Branch, PACU_VAV_bot Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type PACU_VAV_bot_OA, !- Component 1 Name PACU_VAV_bot Supply Equipment Inlet Node, !- Component 1 Inlet Node Name PACU_VAV_bot_OA-PACU_VAV_bot_CoolCNode, !- Component 1 Outlet Node Name CoilSystem:Cooling:DX, !- Component 2 Object Type PACU_VAV_bot_CoolC, !- Component 2 Name PACU_VAV_bot_OA-PACU_VAV_bot_CoolCNode, !- Component 2 Inlet Node Name PACU_VAV_bot_CoolC-PACU_VAV_bot_HeatCNode, !- Component 2 Outlet Node Name Coil:Heating:Fuel, !- Component 3 Object Type PACU_VAV_bot_HeatC, !- Component 3 Name PACU_VAV_bot_CoolC-PACU_VAV_bot_HeatCNode, !- Component 3 Inlet Node Name PACU_VAV_bot_HeatC-PACU_VAV_bot FanNode, !- Component 3 Outlet Node Name Fan:VariableVolume, !- Component 4 Object Type PACU_VAV_bot Fan, !- Component 4 Name PACU_VAV_bot_HeatC-PACU_VAV_bot FanNode, !- Component 4 Inlet Node Name PACU_VAV_bot Supply Equipment Outlet Node; !- Component 4 Outlet Node Name Branch, PACU_VAV_mid Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type PACU_VAV_mid_OA, !- Component 1 Name PACU_VAV_mid Supply Equipment Inlet Node, !- Component 1 Inlet Node Name PACU_VAV_mid_OA-PACU_VAV_mid_CoolCNode, !- Component 1 Outlet Node Name CoilSystem:Cooling:DX, !- Component 2 Object Type PACU_VAV_mid_CoolC, !- Component 2 Name PACU_VAV_mid_OA-PACU_VAV_mid_CoolCNode, !- Component 2 Inlet Node Name PACU_VAV_mid_CoolC-PACU_VAV_mid_HeatCNode, !- Component 2 Outlet Node Name Coil:Heating:Fuel, !- Component 3 Object Type PACU_VAV_mid_HeatC, !- Component 3 Name PACU_VAV_mid_CoolC-PACU_VAV_mid_HeatCNode, !- Component 3 Inlet Node Name PACU_VAV_mid_HeatC-PACU_VAV_mid FanNode, !- Component 3 Outlet Node Name Fan:VariableVolume, !- Component 4 Object Type PACU_VAV_mid Fan, !- Component 4 Name PACU_VAV_mid_HeatC-PACU_VAV_mid FanNode, !- Component 4 Inlet Node Name PACU_VAV_mid Supply Equipment Outlet Node; !- Component 4 Outlet Node Name Branch, PACU_VAV_top Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type PACU_VAV_top_OA, !- Component 1 Name PACU_VAV_top Supply Equipment Inlet Node, !- Component 1 Inlet Node Name PACU_VAV_top_OA-PACU_VAV_top_CoolCNode, !- Component 1 Outlet Node Name CoilSystem:Cooling:DX, !- Component 2 Object Type PACU_VAV_top_CoolC, !- Component 2 Name PACU_VAV_top_OA-PACU_VAV_top_CoolCNode, !- Component 2 Inlet Node Name PACU_VAV_top_CoolC-PACU_VAV_top_HeatCNode, !- Component 2 Outlet Node Name Coil:Heating:Fuel, !- Component 3 Object Type PACU_VAV_top_HeatC, !- Component 3 Name PACU_VAV_top_CoolC-PACU_VAV_top_HeatCNode, !- Component 3 Inlet Node Name PACU_VAV_top_HeatC-PACU_VAV_top FanNode, !- Component 3 Outlet Node Name Fan:VariableVolume, !- Component 4 Object Type PACU_VAV_top Fan, !- Component 4 Name PACU_VAV_top_HeatC-PACU_VAV_top FanNode, !- Component 4 Inlet Node Name PACU_VAV_top Supply Equipment Outlet Node; !- Component 4 Outlet Node Name Branch, SHWSys1 Supply Inlet Branch, !- Name , !- Pressure Drop Curve Name Pump:ConstantSpeed, !- Component 1 Object Type SHWSys1 Pump, !- Component 1 Name SHWSys1 Supply Inlet Node, !- Component 1 Inlet Node Name SHWSys1 Pump-SHWSys1 Water HeaterNodeviaConnector; !- Component 1 Outlet Node Name Branch, SHWSys1 Supply Equipment Branch, !- Name , !- Pressure Drop Curve Name WaterHeater:Mixed, !- Component 1 Object Type SHWSys1 Water Heater, !- Component 1 Name SHWSys1 Pump-SHWSys1 Water HeaterNode, !- Component 1 Inlet Node Name SHWSys1 Supply Equipment Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Supply Equipment Bypass Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type SHWSys1 Supply Equipment Bypass Pipe, !- Component 1 Name SHWSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name SHWSys1 Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Supply Outlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type SHWSys1 Supply Outlet Pipe, !- Component 1 Name SHWSys1 Supply Mixer-SHWSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name SHWSys1 Supply Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Inlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type SHWSys1 Demand Inlet Pipe, !- Component 1 Name SHWSys1 Demand Inlet Node, !- Component 1 Inlet Node Name SHWSys1 Demand Inlet Pipe-SHWSys1 Demand Mixer; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 1, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Core_bottom sub cat, !- Component 1 Name Core_bottom sub cat Water Inlet Node, !- Component 1 Inlet Node Name Core_bottom sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 2, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Core_mid sub cat, !- Component 1 Name Core_mid sub cat Water Inlet Node, !- Component 1 Inlet Node Name Core_mid sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 3, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Core_top sub cat, !- Component 1 Name Core_top sub cat Water Inlet Node, !- Component 1 Inlet Node Name Core_top sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 4, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Perimeter_top_ZN_3 sub cat, !- Component 1 Name Perimeter_top_ZN_3 sub cat Water Inlet Node, !- Component 1 Inlet Node Name Perimeter_top_ZN_3 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 5, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Perimeter_top_ZN_2 sub cat, !- Component 1 Name Perimeter_top_ZN_2 sub cat Water Inlet Node, !- Component 1 Inlet Node Name Perimeter_top_ZN_2 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 6, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Perimeter_top_ZN_1 sub cat, !- Component 1 Name Perimeter_top_ZN_1 sub cat Water Inlet Node, !- Component 1 Inlet Node Name Perimeter_top_ZN_1 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 7, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Perimeter_top_ZN_4 sub cat, !- Component 1 Name Perimeter_top_ZN_4 sub cat Water Inlet Node, !- Component 1 Inlet Node Name Perimeter_top_ZN_4 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 8, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Perimeter_bot_ZN_3 sub cat, !- Component 1 Name Perimeter_bot_ZN_3 sub cat Water Inlet Node, !- Component 1 Inlet Node Name Perimeter_bot_ZN_3 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 9, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Perimeter_bot_ZN_2 sub cat, !- Component 1 Name Perimeter_bot_ZN_2 sub cat Water Inlet Node, !- Component 1 Inlet Node Name Perimeter_bot_ZN_2 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 10, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Perimeter_bot_ZN_1 sub cat, !- Component 1 Name Perimeter_bot_ZN_1 sub cat Water Inlet Node, !- Component 1 Inlet Node Name Perimeter_bot_ZN_1 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 11, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Perimeter_bot_ZN_4 sub cat, !- Component 1 Name Perimeter_bot_ZN_4 sub cat Water Inlet Node, !- Component 1 Inlet Node Name Perimeter_bot_ZN_4 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 12, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Perimeter_mid_ZN_3 sub cat, !- Component 1 Name Perimeter_mid_ZN_3 sub cat Water Inlet Node, !- Component 1 Inlet Node Name Perimeter_mid_ZN_3 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 13, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Perimeter_mid_ZN_2 sub cat, !- Component 1 Name Perimeter_mid_ZN_2 sub cat Water Inlet Node, !- Component 1 Inlet Node Name Perimeter_mid_ZN_2 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 14, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Perimeter_mid_ZN_1 sub cat, !- Component 1 Name Perimeter_mid_ZN_1 sub cat Water Inlet Node, !- Component 1 Inlet Node Name Perimeter_mid_ZN_1 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 15, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Perimeter_mid_ZN_4 sub cat, !- Component 1 Name Perimeter_mid_ZN_4 sub cat Water Inlet Node, !- Component 1 Inlet Node Name Perimeter_mid_ZN_4 sub cat Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Bypass Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type SHWSys1 Demand Bypass Pipe, !- Component 1 Name SHWSys1 Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name SHWSys1 Demand Bypass Pipe Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Outlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type SHWSys1 Demand Outlet Pipe, !- Component 1 Name SHWSys1 Demand Mixer-SHWSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name SHWSys1 Demand Outlet Node; !- Component 1 Outlet Node Name !- =========== ALL OBJECTS IN CLASS: PIPE =========== Pipe:Adiabatic, SHWSys1 Supply Equipment Bypass Pipe, !- Name SHWSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name SHWSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name Pipe:Adiabatic, SHWSys1 Supply Outlet Pipe, !- Name SHWSys1 Supply Mixer-SHWSys1 Supply Outlet Pipe, !- Inlet Node Name SHWSys1 Supply Outlet Node; !- Outlet Node Name Pipe:Adiabatic, SHWSys1 Demand Inlet Pipe, !- Name SHWSys1 Demand Inlet Node, !- Inlet Node Name SHWSys1 Demand Inlet Pipe-SHWSys1 Demand Mixer; !- Outlet Node Name Pipe:Adiabatic, SHWSys1 Demand Bypass Pipe, !- Name SHWSys1 Demand Bypass Pipe Inlet Node, !- Inlet Node Name SHWSys1 Demand Bypass Pipe Outlet Node; !- Outlet Node Name Pipe:Adiabatic, SHWSys1 Demand Outlet Pipe, !- Name SHWSys1 Demand Mixer-SHWSys1 Demand Outlet Pipe, !- Inlet Node Name SHWSys1 Demand Outlet Node; !- Outlet Node Name !- =========== ALL OBJECTS IN CLASS: PLANT LOOP =========== PlantLoop, SHWSys1, !- Name WATER, !- Fluid Type , !- User Defined Fluid Type SHWSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name SHWSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name 60, !- Maximum Loop Temperature {C} 10.0, !- Minimum Loop Temperature {C} AUTOSIZE, !- Maximum Loop Flow Rate {m3/s} 0.0, !- Minimum Loop Flow Rate {m3/s} AUTOSIZE, !- Plant Loop Volume {m3} SHWSys1 Supply Inlet Node, !- Plant Side Inlet Node Name SHWSys1 Supply Outlet Node, !- Plant Side Outlet Node Name SHWSys1 Supply Branches, !- Plant Side Branch List Name SHWSys1 Supply Connectors, !- Plant Side Connector List Name SHWSys1 Demand Inlet Node, !- Demand Side Inlet Node Name SHWSys1 Demand Outlet Node, !- Demand Side Outlet Node Name SHWSys1 Demand Branches, !- Demand Side Branch List Name SHWSys1 Demand Connectors, !- Demand Side Connector List Name Optimal; !- Load Distribution Scheme !- =========== ALL OBJECTS IN CLASS: PLANT OPERATION SCHEMES =========== PlantEquipmentOperationSchemes, SHWSys1 Loop Operation Scheme List, !- Name PlantEquipmentOperation:HeatingLoad, !- Control Scheme 1 Object Type SHWSys1 Operation Scheme,!- Control Scheme 1 Name PlantOnSched; !- Control Scheme 1 Schedule Name !- =========== ALL OBJECTS IN CLASS: HEATING LOAD RANGE BASED OPERATION =========== PlantEquipmentOperation:HeatingLoad, SHWSys1 Operation Scheme,!- Name 0.0, !- Load Range 1 Lower Limit {W} 1000000000000000, !- Load Range 1 Upper Limit {W} SHWSys1 Equipment List; !- Range 1 Equipment List Name !- =========== ALL OBJECTS IN CLASS: PLANT EQUIPMENT LIST =========== PlantEquipmentList, SHWSys1 Equipment List, !- Name WaterHeater:Mixed, !- Equipment 1 Object Type SHWSys1 Water Heater; !- Equipment 1 Name !- =========== ALL OBJECTS IN CLASS: SPLITTER =========== Connector:Splitter, SHWSys1 Supply Splitter, !- Name SHWSys1 Supply Inlet Branch, !- Inlet Branch Name SHWSys1 Supply Equipment Branch, !- Outlet Branch 1 Name SHWSys1 Supply Equipment Bypass Branch; !- Outlet Branch 2 Name Connector:Splitter, SHWSys1 Demand Splitter, !- Name SHWSys1 Demand Inlet Branch, !- Inlet Branch Name SHWSys1 Demand Load Branch 1, !- Outlet Branch 1 Name SHWSys1 Demand Load Branch 2, !- Outlet Branch 2 Name SHWSys1 Demand Load Branch 3, !- Outlet Branch 3 Name SHWSys1 Demand Load Branch 4, !- Outlet Branch 4 Name SHWSys1 Demand Load Branch 5, !- Outlet Branch 5 Name SHWSys1 Demand Load Branch 6, !- Outlet Branch 6 Name SHWSys1 Demand Load Branch 7, !- Outlet Branch 7 Name SHWSys1 Demand Load Branch 8, !- Outlet Branch 8 Name SHWSys1 Demand Load Branch 9, !- Outlet Branch 9 Name SHWSys1 Demand Load Branch 10, !- Outlet Branch 10 Name SHWSys1 Demand Load Branch 11, !- Outlet Branch 11 Name SHWSys1 Demand Load Branch 12, !- Outlet Branch 12 Name SHWSys1 Demand Load Branch 13, !- Outlet Branch 13 Name SHWSys1 Demand Load Branch 14, !- Outlet Branch 14 Name SHWSys1 Demand Load Branch 15, !- Outlet Branch 15 Name SHWSys1 Demand Bypass Branch; !- Outlet Branch 16 Name !- =========== ALL OBJECTS IN CLASS: MIXER =========== Connector:Mixer, SHWSys1 Supply Mixer, !- Name SHWSys1 Supply Outlet Branch, !- Outlet Branch Name SHWSys1 Supply Equipment Branch, !- Inlet Branch 1 Name SHWSys1 Supply Equipment Bypass Branch; !- Inlet Branch 2 Name Connector:Mixer, SHWSys1 Demand Mixer, !- Name SHWSys1 Demand Outlet Branch, !- Outlet Branch Name SHWSys1 Demand Load Branch 1, !- Inlet Branch 1 Name SHWSys1 Demand Load Branch 2, !- Inlet Branch 2 Name SHWSys1 Demand Load Branch 3, !- Inlet Branch 3 Name SHWSys1 Demand Load Branch 4, !- Inlet Branch 4 Name SHWSys1 Demand Load Branch 5, !- Inlet Branch 5 Name SHWSys1 Demand Load Branch 6, !- Inlet Branch 6 Name SHWSys1 Demand Load Branch 7, !- Inlet Branch 7 Name SHWSys1 Demand Load Branch 8, !- Inlet Branch 8 Name SHWSys1 Demand Load Branch 9, !- Inlet Branch 9 Name SHWSys1 Demand Load Branch 10, !- Inlet Branch 10 Name SHWSys1 Demand Load Branch 11, !- Inlet Branch 11 Name SHWSys1 Demand Load Branch 12, !- Inlet Branch 12 Name SHWSys1 Demand Load Branch 13, !- Inlet Branch 13 Name SHWSys1 Demand Load Branch 14, !- Inlet Branch 14 Name SHWSys1 Demand Load Branch 15, !- Inlet Branch 15 Name SHWSys1 Demand Bypass Branch; !- Inlet Branch 16 Name !- =========== ALL OBJECTS IN CLASS: AIR PRIMARY LOOP =========== AirLoopHVAC, PACU_VAV_bot, !- Name , !- Controller List Name PACU_VAV_bot Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} PACU_VAV_bot Air Loop Branches, !- Branch List Name , !- Connector List Name PACU_VAV_bot Supply Equipment Inlet Node, !- Supply Side Inlet Node Name PACU_VAV_bot Zone Equipment Outlet Node, !- Demand Side Outlet Node Name PACU_VAV_bot Zone Equipment Inlet Node, !- Demand Side Inlet Node Names PACU_VAV_bot Supply Equipment Outlet Node; !- Supply Side Outlet Node Names AirLoopHVAC, PACU_VAV_mid, !- Name , !- Controller List Name PACU_VAV_mid Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} PACU_VAV_mid Air Loop Branches, !- Branch List Name , !- Connector List Name PACU_VAV_mid Supply Equipment Inlet Node, !- Supply Side Inlet Node Name PACU_VAV_mid Zone Equipment Outlet Node, !- Demand Side Outlet Node Name PACU_VAV_mid Zone Equipment Inlet Node, !- Demand Side Inlet Node Names PACU_VAV_mid Supply Equipment Outlet Node; !- Supply Side Outlet Node Names AirLoopHVAC, PACU_VAV_top, !- Name , !- Controller List Name PACU_VAV_top Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} PACU_VAV_top Air Loop Branches, !- Branch List Name , !- Connector List Name PACU_VAV_top Supply Equipment Inlet Node, !- Supply Side Inlet Node Name PACU_VAV_top Zone Equipment Outlet Node, !- Demand Side Outlet Node Name PACU_VAV_top Zone Equipment Inlet Node, !- Demand Side Inlet Node Names PACU_VAV_top Supply Equipment Outlet Node; !- Supply Side Outlet Node Names !- =========== ALL OBJECTS IN CLASS: CONTROLLER LIST =========== AirLoopHVAC:ControllerList, PACU_VAV_bot_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type PACU_VAV_bot_OA_Controller; !- Controller 1 Name AirLoopHVAC:ControllerList, PACU_VAV_mid_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type PACU_VAV_mid_OA_Controller; !- Controller 1 Name AirLoopHVAC:ControllerList, PACU_VAV_top_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type PACU_VAV_top_OA_Controller; !- Controller 1 Name !- =========== ALL OBJECTS IN CLASS: AIR LOOP EQUIPMENT LIST =========== AirLoopHVAC:OutdoorAirSystem:EquipmentList, PACU_VAV_bot_OA_Equipment, !- Name OutdoorAir:Mixer, !- Component 1 Object Type PACU_VAV_bot_OAMixing Box; !- Component 1 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, PACU_VAV_mid_OA_Equipment, !- Name OutdoorAir:Mixer, !- Component 1 Object Type PACU_VAV_mid_OAMixing Box; !- Component 1 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, PACU_VAV_top_OA_Equipment, !- Name OutdoorAir:Mixer, !- Component 1 Object Type PACU_VAV_top_OAMixing Box; !- Component 1 Name !- =========== ALL OBJECTS IN CLASS: OUTSIDE AIR SYSTEM =========== AirLoopHVAC:OutdoorAirSystem, PACU_VAV_bot_OA, !- Name PACU_VAV_bot_OA_Controllers, !- Controller List Name PACU_VAV_bot_OA_Equipment, !- Outdoor Air Equipment List Name PACU_VAV_bot Availability Manager List; !- Availability Manager List Name AirLoopHVAC:OutdoorAirSystem, PACU_VAV_mid_OA, !- Name PACU_VAV_mid_OA_Controllers, !- Controller List Name PACU_VAV_mid_OA_Equipment, !- Outdoor Air Equipment List Name PACU_VAV_mid Availability Manager List; !- Availability Manager List Name AirLoopHVAC:OutdoorAirSystem, PACU_VAV_top_OA, !- Name PACU_VAV_top_OA_Controllers, !- Controller List Name PACU_VAV_top_OA_Equipment, !- Outdoor Air Equipment List Name PACU_VAV_top Availability Manager List; !- Availability Manager List Name !- =========== ALL OBJECTS IN CLASS: OUTSIDE AIR NODE =========== OutdoorAir:Node, PACU_VAV_bot_CoolC Cond OA node; !- Name OutdoorAir:Node, PACU_VAV_bot_CoolCOA Ref node; !- Name OutdoorAir:Node, PACU_VAV_mid_CoolC Cond OA node; !- Name OutdoorAir:Node, PACU_VAV_mid_CoolCOA Ref node; !- Name OutdoorAir:Node, PACU_VAV_top_CoolC Cond OA node; !- Name OutdoorAir:Node, PACU_VAV_top_CoolCOA Ref node; !- Name !- =========== ALL OBJECTS IN CLASS: OUTSIDE AIR INLET NODE LIST =========== OutdoorAir:NodeList, PACU_VAV_bot_OANode List;!- Node or NodeList Name 1 OutdoorAir:NodeList, PACU_VAV_mid_OANode List;!- Node or NodeList Name 1 OutdoorAir:NodeList, PACU_VAV_top_OANode List;!- Node or NodeList Name 1 !- =========== ALL OBJECTS IN CLASS: OUTSIDE AIR MIXER =========== OutdoorAir:Mixer, PACU_VAV_bot_OAMixing Box, !- Name PACU_VAV_bot_OA-PACU_VAV_bot_CoolCNode, !- Mixed Air Node Name PACU_VAV_bot_OAInlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name PACU_VAV_bot_OARelief Node, !- Relief Air Stream Node Name PACU_VAV_bot Supply Equipment Inlet Node; !- Return Air Stream Node Name OutdoorAir:Mixer, PACU_VAV_mid_OAMixing Box, !- Name PACU_VAV_mid_OA-PACU_VAV_mid_CoolCNode, !- Mixed Air Node Name PACU_VAV_mid_OAInlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name PACU_VAV_mid_OARelief Node, !- Relief Air Stream Node Name PACU_VAV_mid Supply Equipment Inlet Node; !- Return Air Stream Node Name OutdoorAir:Mixer, PACU_VAV_top_OAMixing Box, !- Name PACU_VAV_top_OA-PACU_VAV_top_CoolCNode, !- Mixed Air Node Name PACU_VAV_top_OAInlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name PACU_VAV_top_OARelief Node, !- Relief Air Stream Node Name PACU_VAV_top Supply Equipment Inlet Node; !- Return Air Stream Node Name !- =========== ALL OBJECTS IN CLASS: SYSTEM AVAILABILITY MANAGER LIST =========== AvailabilityManagerAssignmentList, PACU_VAV_bot Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type PACU_VAV_bot Availability Manager; !- Availability Manager 1 Name AvailabilityManagerAssignmentList, PACU_VAV_mid Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type PACU_VAV_mid Availability Manager; !- Availability Manager 1 Name AvailabilityManagerAssignmentList, PACU_VAV_top Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type PACU_VAV_top Availability Manager; !- Availability Manager 1 Name !- =========== ALL OBJECTS IN CLASS: SYSTEM AVAILABILITY MANAGER:NIGHT CYCLE =========== AvailabilityManager:NightCycle, PACU_VAV_bot Availability Manager, !- Name Always_On, !- Applicability Schedule Name HVACOperationSchd, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} AvailabilityManager:NightCycle, PACU_VAV_mid Availability Manager, !- Name Always_On, !- Applicability Schedule Name HVACOperationSchd, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} AvailabilityManager:NightCycle, PACU_VAV_top Availability Manager, !- Name Always_On, !- Applicability Schedule Name HVACOperationSchd, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} !- =========== ALL OBJECTS IN CLASS: SET POINT MANAGER:WARMEST =========== SetpointManager:OutdoorAirReset, PACU_VAV_bot Supply Air Temperature Manager, !- Name Temperature, !- Control Variable 15.6, !- Setpoint at Outdoor Low Temperature {C} 10, !- Outdoor Low Temperature {C} 12.8, !- Setpoint at Outdoor High Temperature {C} 21.1, !- Outdoor High Temperature {C} PACU_VAV_bot Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:OutdoorAirReset, PACU_VAV_mid Supply Air Temperature Manager, !- Name Temperature, !- Control Variable 15.6, !- Setpoint at Outdoor Low Temperature {C} 10, !- Outdoor Low Temperature {C} 12.8, !- Setpoint at Outdoor High Temperature {C} 21.1, !- Outdoor High Temperature {C} PACU_VAV_mid Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:OutdoorAirReset, PACU_VAV_top Supply Air Temperature Manager, !- Name Temperature, !- Control Variable 15.6, !- Setpoint at Outdoor Low Temperature {C} 10, !- Outdoor Low Temperature {C} 12.8, !- Setpoint at Outdoor High Temperature {C} 21.1, !- Outdoor High Temperature {C} PACU_VAV_top Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:Scheduled, SHWSys1 Loop Setpoint Manager, !- Name Temperature, !- Control Variable SHWSys1-Loop-Temp-Schedule, !- Schedule Name SHWSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name !- =========== ALL OBJECTS IN CLASS: SET POINT MANAGER:MIXED AIR =========== SetpointManager:MixedAir, PACU_VAV_bot_CoolC SAT Manager, !- Name Temperature, !- Control Variable PACU_VAV_bot Supply Equipment Outlet Node, !- Reference Setpoint Node Name PACU_VAV_bot_HeatC-PACU_VAV_bot FanNode, !- Fan Inlet Node Name PACU_VAV_bot Supply Equipment Outlet Node, !- Fan Outlet Node Name PACU_VAV_bot_CoolC-PACU_VAV_bot_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, PACU_VAV_bot_HeatC MixedAir Manager, !- Name Temperature, !- Control Variable PACU_VAV_bot Supply Equipment Outlet Node, !- Reference Setpoint Node Name PACU_VAV_bot_HeatC-PACU_VAV_bot FanNode, !- Fan Inlet Node Name PACU_VAV_bot Supply Equipment Outlet Node, !- Fan Outlet Node Name PACU_VAV_bot_HeatC-PACU_VAV_bot FanNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, PACU_VAV_bot_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable PACU_VAV_bot Supply Equipment Outlet Node, !- Reference Setpoint Node Name PACU_VAV_bot_HeatC-PACU_VAV_bot FanNode, !- Fan Inlet Node Name PACU_VAV_bot Supply Equipment Outlet Node, !- Fan Outlet Node Name PACU_VAV_bot_OA-PACU_VAV_bot_CoolCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, PACU_VAV_mid_CoolC SAT Manager, !- Name Temperature, !- Control Variable PACU_VAV_mid Supply Equipment Outlet Node, !- Reference Setpoint Node Name PACU_VAV_mid_HeatC-PACU_VAV_mid FanNode, !- Fan Inlet Node Name PACU_VAV_mid Supply Equipment Outlet Node, !- Fan Outlet Node Name PACU_VAV_mid_CoolC-PACU_VAV_mid_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, PACU_VAV_mid_HeatC MixedAir Manager, !- Name Temperature, !- Control Variable PACU_VAV_mid Supply Equipment Outlet Node, !- Reference Setpoint Node Name PACU_VAV_mid_HeatC-PACU_VAV_mid FanNode, !- Fan Inlet Node Name PACU_VAV_mid Supply Equipment Outlet Node, !- Fan Outlet Node Name PACU_VAV_mid_HeatC-PACU_VAV_mid FanNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, PACU_VAV_mid_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable PACU_VAV_mid Supply Equipment Outlet Node, !- Reference Setpoint Node Name PACU_VAV_mid_HeatC-PACU_VAV_mid FanNode, !- Fan Inlet Node Name PACU_VAV_mid Supply Equipment Outlet Node, !- Fan Outlet Node Name PACU_VAV_mid_OA-PACU_VAV_mid_CoolCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, PACU_VAV_top_CoolC SAT Manager, !- Name Temperature, !- Control Variable PACU_VAV_top Supply Equipment Outlet Node, !- Reference Setpoint Node Name PACU_VAV_top_HeatC-PACU_VAV_top FanNode, !- Fan Inlet Node Name PACU_VAV_top Supply Equipment Outlet Node, !- Fan Outlet Node Name PACU_VAV_top_CoolC-PACU_VAV_top_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, PACU_VAV_top_HeatC MixedAir Manager, !- Name Temperature, !- Control Variable PACU_VAV_top Supply Equipment Outlet Node, !- Reference Setpoint Node Name PACU_VAV_top_HeatC-PACU_VAV_top FanNode, !- Fan Inlet Node Name PACU_VAV_top Supply Equipment Outlet Node, !- Fan Outlet Node Name PACU_VAV_top_HeatC-PACU_VAV_top FanNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, PACU_VAV_top_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable PACU_VAV_top Supply Equipment Outlet Node, !- Reference Setpoint Node Name PACU_VAV_top_HeatC-PACU_VAV_top FanNode, !- Fan Inlet Node Name PACU_VAV_top Supply Equipment Outlet Node, !- Fan Outlet Node Name PACU_VAV_top_OA-PACU_VAV_top_CoolCNode; !- Setpoint Node or NodeList Name !- =========== ALL OBJECTS IN CLASS: CONTROLLER:OUTSIDE AIR =========== Controller:OutdoorAir, PACU_VAV_bot_OA_Controller, !- Name PACU_VAV_bot_OARelief Node, !- Relief Air Outlet Node Name PACU_VAV_bot Supply Equipment Inlet Node, !- Return Air Node Name PACU_VAV_bot_OA-PACU_VAV_bot_CoolCNode, !- Mixed Air Node Name PACU_VAV_bot_OAInlet Node, !- Actuator Node Name 0, !- Minimum Outdoor Air Flow Rate {m3/s} !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type , !- Economizer Maximum Limit Dry-Bulb Temperature {C} , !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name , !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type FixedMinimum, !- Minimum Limit Type MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name , !- Minimum Fraction of Outdoor Air Schedule Name VAV_BOT Max OA Fraction, !- Maximum Fraction of Outdoor Air Schedule Name PACU_VAV_BOT_DCV; !- Mechanical Ventilation Controller Name !- Mechanical Ventilation Controller Name!- Mechanical Ventilation Controller Name!- Mechanical Ventilation Controller Name!- Mechanical Ventilation Controller Name Controller:OutdoorAir, PACU_VAV_mid_OA_Controller, !- Name PACU_VAV_mid_OARelief Node, !- Relief Air Outlet Node Name PACU_VAV_mid Supply Equipment Inlet Node, !- Return Air Node Name PACU_VAV_mid_OA-PACU_VAV_mid_CoolCNode, !- Mixed Air Node Name PACU_VAV_mid_OAInlet Node, !- Actuator Node Name 0, !- Minimum Outdoor Air Flow Rate {m3/s} !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type , !- Economizer Maximum Limit Dry-Bulb Temperature {C} , !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name , !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type FixedMinimum, !- Minimum Limit Type MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name , !- Minimum Fraction of Outdoor Air Schedule Name VAV_MID Max OA Fraction, !- Maximum Fraction of Outdoor Air Schedule Name PACU_VAV_MID_DCV; !- Mechanical Ventilation Controller Name !- Mechanical Ventilation Controller Name!- Mechanical Ventilation Controller Name!- Mechanical Ventilation Controller Name!- Mechanical Ventilation Controller Name Controller:OutdoorAir, PACU_VAV_top_OA_Controller, !- Name PACU_VAV_top_OARelief Node, !- Relief Air Outlet Node Name PACU_VAV_top Supply Equipment Inlet Node, !- Return Air Node Name PACU_VAV_top_OA-PACU_VAV_top_CoolCNode, !- Mixed Air Node Name PACU_VAV_top_OAInlet Node, !- Actuator Node Name 0, !- Minimum Outdoor Air Flow Rate {m3/s} !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type , !- Economizer Maximum Limit Dry-Bulb Temperature {C} , !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name , !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type FixedMinimum, !- Minimum Limit Type MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name , !- Minimum Fraction of Outdoor Air Schedule Name VAV_TOP Max OA Fraction, !- Maximum Fraction of Outdoor Air Schedule Name PACU_VAV_TOP_DCV; !- Mechanical Ventilation Controller Name !- Mechanical Ventilation Controller Name!- Mechanical Ventilation Controller Name!- Mechanical Ventilation Controller Name!- Mechanical Ventilation Controller Name !- =========== ALL OBJECTS IN CLASS: CONTROLLED ZONE EQUIP CONFIGURATION =========== ZoneHVAC:EquipmentConnections, Core_bottom, !- Zone Name Core_bottom Equipment, !- Zone Conditioning Equipment List Name Core_bottom Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Core_bottom Air Node, !- Zone Air Node Name Core_bottom Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Core_mid, !- Zone Name Core_mid Equipment, !- Zone Conditioning Equipment List Name Core_mid Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Core_mid Air Node, !- Zone Air Node Name Core_mid Return Air Node;!- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Core_top, !- Zone Name Core_top Equipment, !- Zone Conditioning Equipment List Name Core_top Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Core_top Air Node, !- Zone Air Node Name Core_top Return Air Node;!- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Perimeter_top_ZN_3, !- Zone Name Perimeter_top_ZN_3 Equipment, !- Zone Conditioning Equipment List Name Perimeter_top_ZN_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Perimeter_top_ZN_3 Air Node, !- Zone Air Node Name Perimeter_top_ZN_3 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Perimeter_top_ZN_2, !- Zone Name Perimeter_top_ZN_2 Equipment, !- Zone Conditioning Equipment List Name Perimeter_top_ZN_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Perimeter_top_ZN_2 Air Node, !- Zone Air Node Name Perimeter_top_ZN_2 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Perimeter_top_ZN_1, !- Zone Name Perimeter_top_ZN_1 Equipment, !- Zone Conditioning Equipment List Name Perimeter_top_ZN_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Perimeter_top_ZN_1 Air Node, !- Zone Air Node Name Perimeter_top_ZN_1 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Perimeter_top_ZN_4, !- Zone Name Perimeter_top_ZN_4 Equipment, !- Zone Conditioning Equipment List Name Perimeter_top_ZN_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Perimeter_top_ZN_4 Air Node, !- Zone Air Node Name Perimeter_top_ZN_4 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Perimeter_bot_ZN_3, !- Zone Name Perimeter_bot_ZN_3 Equipment, !- Zone Conditioning Equipment List Name Perimeter_bot_ZN_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Perimeter_bot_ZN_3 Air Node, !- Zone Air Node Name Perimeter_bot_ZN_3 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Perimeter_bot_ZN_2, !- Zone Name Perimeter_bot_ZN_2 Equipment, !- Zone Conditioning Equipment List Name Perimeter_bot_ZN_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Perimeter_bot_ZN_2 Air Node, !- Zone Air Node Name Perimeter_bot_ZN_2 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Perimeter_bot_ZN_1, !- Zone Name Perimeter_bot_ZN_1 Equipment, !- Zone Conditioning Equipment List Name Perimeter_bot_ZN_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Perimeter_bot_ZN_1 Air Node, !- Zone Air Node Name Perimeter_bot_ZN_1 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Perimeter_bot_ZN_4, !- Zone Name Perimeter_bot_ZN_4 Equipment, !- Zone Conditioning Equipment List Name Perimeter_bot_ZN_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Perimeter_bot_ZN_4 Air Node, !- Zone Air Node Name Perimeter_bot_ZN_4 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Perimeter_mid_ZN_3, !- Zone Name Perimeter_mid_ZN_3 Equipment, !- Zone Conditioning Equipment List Name Perimeter_mid_ZN_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Perimeter_mid_ZN_3 Air Node, !- Zone Air Node Name Perimeter_mid_ZN_3 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Perimeter_mid_ZN_2, !- Zone Name Perimeter_mid_ZN_2 Equipment, !- Zone Conditioning Equipment List Name Perimeter_mid_ZN_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Perimeter_mid_ZN_2 Air Node, !- Zone Air Node Name Perimeter_mid_ZN_2 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Perimeter_mid_ZN_1, !- Zone Name Perimeter_mid_ZN_1 Equipment, !- Zone Conditioning Equipment List Name Perimeter_mid_ZN_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Perimeter_mid_ZN_1 Air Node, !- Zone Air Node Name Perimeter_mid_ZN_1 Return Air Node; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Perimeter_mid_ZN_4, !- Zone Name Perimeter_mid_ZN_4 Equipment, !- Zone Conditioning Equipment List Name Perimeter_mid_ZN_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Perimeter_mid_ZN_4 Air Node, !- Zone Air Node Name Perimeter_mid_ZN_4 Return Air Node; !- Zone Return Air Node or NodeList Name !- =========== ALL OBJECTS IN CLASS: ZONE EQUIPMENT LIST =========== ZoneHVAC:EquipmentList, Core_bottom Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Core_bottom VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Core_mid Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Core_mid VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Core_top Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Core_top VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Perimeter_top_ZN_3 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Perimeter_top_ZN_3 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Perimeter_top_ZN_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Perimeter_top_ZN_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Perimeter_top_ZN_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Perimeter_top_ZN_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Perimeter_top_ZN_4 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Perimeter_top_ZN_4 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Perimeter_bot_ZN_3 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Perimeter_bot_ZN_3 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Perimeter_bot_ZN_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Perimeter_bot_ZN_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Perimeter_bot_ZN_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Perimeter_bot_ZN_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Perimeter_bot_ZN_4 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Perimeter_bot_ZN_4 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Perimeter_mid_ZN_3 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Perimeter_mid_ZN_3 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Perimeter_mid_ZN_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Perimeter_mid_ZN_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Perimeter_mid_ZN_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Perimeter_mid_ZN_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Perimeter_mid_ZN_4 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Perimeter_mid_ZN_4 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence !- =========== ALL OBJECTS IN CLASS: AIR DISTRIBUTION UNIT =========== ZoneHVAC:AirDistributionUnit, Core_bottom VAV Box, !- Name Core_bottom VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Core_bottom VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Core_mid VAV Box, !- Name Core_mid VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Core_mid VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Core_top VAV Box, !- Name Core_top VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Core_top VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Perimeter_top_ZN_3 VAV Box, !- Name Perimeter_top_ZN_3 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Perimeter_top_ZN_3 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Perimeter_top_ZN_2 VAV Box, !- Name Perimeter_top_ZN_2 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Perimeter_top_ZN_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Perimeter_top_ZN_1 VAV Box, !- Name Perimeter_top_ZN_1 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Perimeter_top_ZN_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Perimeter_top_ZN_4 VAV Box, !- Name Perimeter_top_ZN_4 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Perimeter_top_ZN_4 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Perimeter_bot_ZN_3 VAV Box, !- Name Perimeter_bot_ZN_3 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Perimeter_bot_ZN_3 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Perimeter_bot_ZN_2 VAV Box, !- Name Perimeter_bot_ZN_2 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Perimeter_bot_ZN_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Perimeter_bot_ZN_1 VAV Box, !- Name Perimeter_bot_ZN_1 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Perimeter_bot_ZN_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Perimeter_bot_ZN_4 VAV Box, !- Name Perimeter_bot_ZN_4 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Perimeter_bot_ZN_4 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Perimeter_mid_ZN_3 VAV Box, !- Name Perimeter_mid_ZN_3 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Perimeter_mid_ZN_3 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Perimeter_mid_ZN_2 VAV Box, !- Name Perimeter_mid_ZN_2 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Perimeter_mid_ZN_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Perimeter_mid_ZN_1 VAV Box, !- Name Perimeter_mid_ZN_1 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Perimeter_mid_ZN_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Perimeter_mid_ZN_4 VAV Box, !- Name Perimeter_mid_ZN_4 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Perimeter_mid_ZN_4 VAV Box Component; !- Air Terminal Name !- =========== ALL OBJECTS IN CLASS: DXSYSTEM:AIRLOOP =========== CoilSystem:Cooling:DX, PACU_VAV_bot_CoolC, !- Name ALWAYS_ON, !- Availability Schedule Name PACU_VAV_bot_OA-PACU_VAV_bot_CoolCNode, !- DX Cooling Coil System Inlet Node Name PACU_VAV_bot_CoolC-PACU_VAV_bot_HeatCNode, !- DX Cooling Coil System Outlet Node Name PACU_VAV_bot_CoolC-PACU_VAV_bot_HeatCNode, !- DX Cooling Coil System Sensor Node Name Coil:Cooling:DX:TwoSpeed,!- Cooling Coil Object Type PACU_VAV_bot_CoolC DXCoil; !- Cooling Coil Name CoilSystem:Cooling:DX, PACU_VAV_mid_CoolC, !- Name ALWAYS_ON, !- Availability Schedule Name PACU_VAV_mid_OA-PACU_VAV_mid_CoolCNode, !- DX Cooling Coil System Inlet Node Name PACU_VAV_mid_CoolC-PACU_VAV_mid_HeatCNode, !- DX Cooling Coil System Outlet Node Name PACU_VAV_mid_CoolC-PACU_VAV_mid_HeatCNode, !- DX Cooling Coil System Sensor Node Name Coil:Cooling:DX:TwoSpeed,!- Cooling Coil Object Type PACU_VAV_mid_CoolC DXCoil; !- Cooling Coil Name CoilSystem:Cooling:DX, PACU_VAV_top_CoolC, !- Name ALWAYS_ON, !- Availability Schedule Name PACU_VAV_top_OA-PACU_VAV_top_CoolCNode, !- DX Cooling Coil System Inlet Node Name PACU_VAV_top_CoolC-PACU_VAV_top_HeatCNode, !- DX Cooling Coil System Outlet Node Name PACU_VAV_top_CoolC-PACU_VAV_top_HeatCNode, !- DX Cooling Coil System Sensor Node Name Coil:Cooling:DX:TwoSpeed,!- Cooling Coil Object Type PACU_VAV_top_CoolC DXCoil; !- Cooling Coil Name !- =========== ALL OBJECTS IN CLASS: SINGLE DUCT:VAV:REHEAT =========== AirTerminal:SingleDuct:VAV:Reheat, Core_bottom VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Core_bottom VAV Box Damper Node, !- Damper Air Outlet Node Name Core_bottom VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.172, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Core_bottom VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Core_bottom VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance Normal, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Core_mid VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Core_mid VAV Box Damper Node, !- Damper Air Outlet Node Name Core_mid VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.299, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Core_mid VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Core_mid VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance Normal, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Core_top VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Core_top VAV Box Damper Node, !- Damper Air Outlet Node Name Core_top VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.298, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Core_top VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Core_top VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance Normal, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Perimeter_top_ZN_3 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Perimeter_top_ZN_3 VAV Box Damper Node, !- Damper Air Outlet Node Name Perimeter_top_ZN_3 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.232, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Perimeter_top_ZN_3 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Perimeter_top_ZN_3 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance Normal, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Perimeter_top_ZN_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Perimeter_top_ZN_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Perimeter_top_ZN_2 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.111, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Perimeter_top_ZN_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Perimeter_top_ZN_2 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance Normal, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Perimeter_top_ZN_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Perimeter_top_ZN_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Perimeter_top_ZN_1 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.194, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Perimeter_top_ZN_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Perimeter_top_ZN_1 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance Normal, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Perimeter_top_ZN_4 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Perimeter_top_ZN_4 VAV Box Damper Node, !- Damper Air Outlet Node Name Perimeter_top_ZN_4 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.106, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Perimeter_top_ZN_4 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Perimeter_top_ZN_4 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance Normal, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Perimeter_bot_ZN_3 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Perimeter_bot_ZN_3 VAV Box Damper Node, !- Damper Air Outlet Node Name Perimeter_bot_ZN_3 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.29, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Perimeter_bot_ZN_3 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Perimeter_bot_ZN_3 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance Normal, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Perimeter_bot_ZN_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Perimeter_bot_ZN_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Perimeter_bot_ZN_2 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.136, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Perimeter_bot_ZN_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Perimeter_bot_ZN_2 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance Normal, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Perimeter_bot_ZN_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Perimeter_bot_ZN_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Perimeter_bot_ZN_1 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.248, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Perimeter_bot_ZN_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Perimeter_bot_ZN_1 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance Normal, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Perimeter_bot_ZN_4 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Perimeter_bot_ZN_4 VAV Box Damper Node, !- Damper Air Outlet Node Name Perimeter_bot_ZN_4 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.13, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Perimeter_bot_ZN_4 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Perimeter_bot_ZN_4 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance Normal, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Perimeter_mid_ZN_3 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Perimeter_mid_ZN_3 VAV Box Damper Node, !- Damper Air Outlet Node Name Perimeter_mid_ZN_3 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.263, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Perimeter_mid_ZN_3 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Perimeter_mid_ZN_3 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance Normal, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Perimeter_mid_ZN_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Perimeter_mid_ZN_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Perimeter_mid_ZN_2 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Scheduled, !- Zone Minimum Air Flow Input Method , !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} PERIMETER_MID_ZN_2_MDP_Sch,!- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Perimeter_mid_ZN_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Perimeter_mid_ZN_2 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance Normal, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Perimeter_mid_ZN_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Perimeter_mid_ZN_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Perimeter_mid_ZN_1 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.212, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Perimeter_mid_ZN_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Perimeter_mid_ZN_1 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance Normal, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Perimeter_mid_ZN_4 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Perimeter_mid_ZN_4 VAV Box Damper Node, !- Damper Air Outlet Node Name Perimeter_mid_ZN_4 VAV Box Inlet Node, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.112, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Perimeter_mid_ZN_4 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Perimeter_mid_ZN_4 VAV Box Outlet Node, !- Air Outlet Node Name 0.001, !- Convergence Tolerance Normal, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} !- =========== ALL OBJECTS IN CLASS: ZONE CONTROL:THERMOSTATIC =========== ZoneControl:Thermostat, Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name !- =========== ALL OBJECTS IN CLASS: DUAL SETPOINT WITH DEADBAND =========== ThermostatSetpoint:DualSetpoint, Core_bottom DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Core_mid DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Core_top DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Perimeter_top_ZN_3 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Perimeter_top_ZN_2 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Perimeter_top_ZN_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Perimeter_top_ZN_4 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Perimeter_bot_ZN_3 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Perimeter_bot_ZN_2 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Perimeter_bot_ZN_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Perimeter_bot_ZN_4 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Perimeter_mid_ZN_3 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Perimeter_mid_ZN_2 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM_w_SB, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM_w_SB; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Perimeter_mid_ZN_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Perimeter_mid_ZN_4 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name !- =========== ALL OBJECTS IN CLASS: ZONE SUPPLY AIR PATH =========== AirLoopHVAC:SupplyPath, PACU_VAV_bot, !- Name PACU_VAV_bot Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type PACU_VAV_bot Supply Air Splitter; !- Component 1 Name AirLoopHVAC:SupplyPath, PACU_VAV_mid, !- Name PACU_VAV_mid Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type PACU_VAV_mid Supply Air Splitter; !- Component 1 Name AirLoopHVAC:SupplyPath, PACU_VAV_top, !- Name PACU_VAV_top Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type PACU_VAV_top Supply Air Splitter; !- Component 1 Name !- =========== ALL OBJECTS IN CLASS: ZONE RETURN AIR PATH =========== AirLoopHVAC:ReturnPath, PACU_VAV_bot Return Air Path, !- Name PACU_VAV_bot Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ReturnPlenum,!- Component 1 Object Type FirstFloor_Return_Plenum,!- Component 1 Name AirLoopHVAC:ZoneMixer, !- Component 2 Object Type PACU_VAV_bot Return Air Mixer; !- Component 2 Name AirLoopHVAC:ReturnPath, PACU_VAV_mid Return Air Path, !- Name PACU_VAV_mid Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ReturnPlenum,!- Component 1 Object Type MidFloor_Return_Plenum, !- Component 1 Name AirLoopHVAC:ZoneMixer, !- Component 2 Object Type PACU_VAV_mid Return Air Mixer; !- Component 2 Name AirLoopHVAC:ReturnPath, PACU_VAV_top Return Air Path, !- Name PACU_VAV_top Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ReturnPlenum,!- Component 1 Object Type TopFloor_Return_Plenum, !- Component 1 Name AirLoopHVAC:ZoneMixer, !- Component 2 Object Type PACU_VAV_top Return Air Mixer; !- Component 2 Name !- =========== ALL OBJECTS IN CLASS: ZONE RETURN PLENUM =========== AirLoopHVAC:ReturnPlenum, FirstFloor_Return_Plenum,!- Name FirstFloor_Plenum, !- Zone Name FirstFloor_Plenum Node, !- Zone Node Name FirstFloor_Plenum Outlet Node, !- Outlet Node Name , !- Induced Air Outlet Node or NodeList Name Core_bottom Return Air Node, !- Inlet 1 Node Name Perimeter_bot_ZN_4 Return Air Node, !- Inlet 2 Node Name Perimeter_bot_ZN_3 Return Air Node, !- Inlet 3 Node Name Perimeter_bot_ZN_2 Return Air Node, !- Inlet 4 Node Name Perimeter_bot_ZN_1 Return Air Node; !- Inlet 5 Node Name AirLoopHVAC:ReturnPlenum, MidFloor_Return_Plenum, !- Name MidFloor_Plenum, !- Zone Name MidFloor_Plenum Node, !- Zone Node Name MidFloor_Plenum Outlet Node, !- Outlet Node Name , !- Induced Air Outlet Node or NodeList Name Core_mid Return Air Node,!- Inlet 1 Node Name Perimeter_mid_ZN_4 Return Air Node, !- Inlet 2 Node Name Perimeter_mid_ZN_3 Return Air Node, !- Inlet 3 Node Name Perimeter_mid_ZN_2 Return Air Node, !- Inlet 4 Node Name Perimeter_mid_ZN_1 Return Air Node; !- Inlet 5 Node Name AirLoopHVAC:ReturnPlenum, TopFloor_Return_Plenum, !- Name TopFloor_Plenum, !- Zone Name TopFloor_Plenum Node, !- Zone Node Name TopFloor_Plenum Outlet Node, !- Outlet Node Name , !- Induced Air Outlet Node or NodeList Name Core_top Return Air Node,!- Inlet 1 Node Name Perimeter_top_ZN_4 Return Air Node, !- Inlet 2 Node Name Perimeter_top_ZN_3 Return Air Node, !- Inlet 3 Node Name Perimeter_top_ZN_2 Return Air Node, !- Inlet 4 Node Name Perimeter_top_ZN_1 Return Air Node; !- Inlet 5 Node Name !- =========== ALL OBJECTS IN CLASS: ZONE SPLITTER =========== AirLoopHVAC:ZoneSplitter, PACU_VAV_bot Supply Air Splitter, !- Name PACU_VAV_bot Zone Equipment Inlet Node, !- Inlet Node Name Core_bottom VAV Box Inlet Node, !- Outlet 1 Node Name Perimeter_bot_ZN_3 VAV Box Inlet Node, !- Outlet 2 Node Name Perimeter_bot_ZN_2 VAV Box Inlet Node, !- Outlet 3 Node Name Perimeter_bot_ZN_1 VAV Box Inlet Node, !- Outlet 4 Node Name Perimeter_bot_ZN_4 VAV Box Inlet Node; !- Outlet 5 Node Name AirLoopHVAC:ZoneSplitter, PACU_VAV_mid Supply Air Splitter, !- Name PACU_VAV_mid Zone Equipment Inlet Node, !- Inlet Node Name Core_mid VAV Box Inlet Node, !- Outlet 1 Node Name Perimeter_mid_ZN_3 VAV Box Inlet Node, !- Outlet 2 Node Name Perimeter_mid_ZN_2 VAV Box Inlet Node, !- Outlet 3 Node Name Perimeter_mid_ZN_1 VAV Box Inlet Node, !- Outlet 4 Node Name Perimeter_mid_ZN_4 VAV Box Inlet Node; !- Outlet 5 Node Name AirLoopHVAC:ZoneSplitter, PACU_VAV_top Supply Air Splitter, !- Name PACU_VAV_top Zone Equipment Inlet Node, !- Inlet Node Name Core_top VAV Box Inlet Node, !- Outlet 1 Node Name Perimeter_top_ZN_3 VAV Box Inlet Node, !- Outlet 2 Node Name Perimeter_top_ZN_2 VAV Box Inlet Node, !- Outlet 3 Node Name Perimeter_top_ZN_1 VAV Box Inlet Node, !- Outlet 4 Node Name Perimeter_top_ZN_4 VAV Box Inlet Node; !- Outlet 5 Node Name !- =========== ALL OBJECTS IN CLASS: ZONE MIXER =========== AirLoopHVAC:ZoneMixer, PACU_VAV_bot Return Air Mixer, !- Name PACU_VAV_bot Zone Equipment Outlet Node, !- Outlet Node Name FirstFloor_Plenum Outlet Node; !- Inlet 1 Node Name AirLoopHVAC:ZoneMixer, PACU_VAV_mid Return Air Mixer, !- Name PACU_VAV_mid Zone Equipment Outlet Node, !- Outlet Node Name MidFloor_Plenum Outlet Node; !- Inlet 1 Node Name AirLoopHVAC:ZoneMixer, PACU_VAV_top Return Air Mixer, !- Name PACU_VAV_top Zone Equipment Outlet Node, !- Outlet Node Name TopFloor_Plenum Outlet Node; !- Inlet 1 Node Name !- =========== ALL OBJECTS IN CLASS: WATER HEATER:MIXED =========== WaterHeater:Mixed, SHWSys1 Water Heater, !- Name 0.3785412, !- Tank Volume {m3} SHWSys1 Water Heater Setpoint Temperature Schedule, !- Setpoint Temperature Schedule Name 2.0, !- Deadband Temperature Difference {deltaC} 82.2222, !- Maximum Temperature Limit {C} Cycle, !- Heater Control Type 29307.11, !- Heater Maximum Capacity {W} , !- Heater Minimum Capacity {W} , !- Heater Ignition Minimum Flow Rate {m3/s} , !- Heater Ignition Delay {s} NATURALGAS, !- Heater Fuel Type 0.808039999, !- Heater Thermal Efficiency , !- Part Load Factor Curve Name 1886.44, !- Off Cycle Parasitic Fuel Consumption Rate {W} NATURALGAS, !- Off Cycle Parasitic Fuel Type 0.8, !- Off Cycle Parasitic Heat Fraction to Tank 1886.44, !- On Cycle Parasitic Fuel Consumption Rate {W} NATURALGAS, !- On Cycle Parasitic Fuel Type , !- On Cycle Parasitic Heat Fraction to Tank zone, !- Ambient Temperature Indicator , !- Ambient Temperature Schedule Name CORE_BOTTOM, !- Ambient Temperature Zone Name , !- Ambient Temperature Outdoor Air Node Name 7.561562668, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K} , !- Off Cycle Loss Fraction to Zone 7.561562668, !- On Cycle Loss Coefficient to Ambient Temperature {W/K} , !- On Cycle Loss Fraction to Zone , !- Peak Use Flow Rate {m3/s} , !- Use Flow Rate Fraction Schedule Name , !- Cold Water Supply Temperature Schedule Name SHWSys1 Pump-SHWSys1 Water HeaterNode, !- Use Side Inlet Node Name SHWSys1 Supply Equipment Outlet Node, !- Use Side Outlet Node Name 1.0, !- Use Side Effectiveness , !- Source Side Inlet Node Name , !- Source Side Outlet Node Name 1.0, !- Source Side Effectiveness AUTOSIZE, !- Use Side Design Flow Rate {m3/s} AUTOSIZE, !- Source Side Design Flow Rate {m3/s} 1.5; !- Indirect Water Heating Recovery Time {hr} !- =========== ALL OBJECTS IN CLASS: PUMP:VARIABLE SPEED =========== Pump:ConstantSpeed, SHWSys1 Pump, !- Name SHWSys1 Supply Inlet Node, !- Inlet Node Name SHWSys1 Pump-SHWSys1 Water HeaterNodeviaConnector, !- Outlet Node Name autosize, !- Design Flow Rate {m3/s} 29891, !- Design Pump Head {Pa} AUTOSIZE, !- Design Power Consumption {W} 0.30, !- Motor Efficiency 0.0, !- Fraction of Motor Inefficiencies to Fluid Stream Intermittent; !- Pump Control Type !- =========== ALL OBJECTS IN CLASS: COIL:ELECTRIC:HEATING =========== Coil:Heating:Electric, Core_bottom VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1.0000, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Core_bottom VAV Box Damper Node, !- Air Inlet Node Name Core_bottom VAV Box Outlet Node; !- Air Outlet Node Name Coil:Heating:Electric, Core_mid VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1.0000, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Core_mid VAV Box Damper Node, !- Air Inlet Node Name Core_mid VAV Box Outlet Node; !- Air Outlet Node Name Coil:Heating:Electric, Core_top VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1.0000, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Core_top VAV Box Damper Node, !- Air Inlet Node Name Core_top VAV Box Outlet Node; !- Air Outlet Node Name Coil:Heating:Electric, Perimeter_top_ZN_3 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1.0000, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Perimeter_top_ZN_3 VAV Box Damper Node, !- Air Inlet Node Name Perimeter_top_ZN_3 VAV Box Outlet Node; !- Air Outlet Node Name Coil:Heating:Electric, Perimeter_top_ZN_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1.0000, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Perimeter_top_ZN_2 VAV Box Damper Node, !- Air Inlet Node Name Perimeter_top_ZN_2 VAV Box Outlet Node; !- Air Outlet Node Name Coil:Heating:Electric, Perimeter_top_ZN_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1.0000, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Perimeter_top_ZN_1 VAV Box Damper Node, !- Air Inlet Node Name Perimeter_top_ZN_1 VAV Box Outlet Node; !- Air Outlet Node Name Coil:Heating:Electric, Perimeter_top_ZN_4 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1.0000, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Perimeter_top_ZN_4 VAV Box Damper Node, !- Air Inlet Node Name Perimeter_top_ZN_4 VAV Box Outlet Node; !- Air Outlet Node Name Coil:Heating:Electric, Perimeter_bot_ZN_3 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1.0000, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Perimeter_bot_ZN_3 VAV Box Damper Node, !- Air Inlet Node Name Perimeter_bot_ZN_3 VAV Box Outlet Node; !- Air Outlet Node Name Coil:Heating:Electric, Perimeter_bot_ZN_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1.0000, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Perimeter_bot_ZN_2 VAV Box Damper Node, !- Air Inlet Node Name Perimeter_bot_ZN_2 VAV Box Outlet Node; !- Air Outlet Node Name Coil:Heating:Electric, Perimeter_bot_ZN_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1.0000, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Perimeter_bot_ZN_1 VAV Box Damper Node, !- Air Inlet Node Name Perimeter_bot_ZN_1 VAV Box Outlet Node; !- Air Outlet Node Name Coil:Heating:Electric, Perimeter_bot_ZN_4 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1.0000, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Perimeter_bot_ZN_4 VAV Box Damper Node, !- Air Inlet Node Name Perimeter_bot_ZN_4 VAV Box Outlet Node; !- Air Outlet Node Name Coil:Heating:Electric, Perimeter_mid_ZN_3 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1.0000, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Perimeter_mid_ZN_3 VAV Box Damper Node, !- Air Inlet Node Name Perimeter_mid_ZN_3 VAV Box Outlet Node; !- Air Outlet Node Name Coil:Heating:Electric, Perimeter_mid_ZN_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1.0000, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Perimeter_mid_ZN_2 VAV Box Damper Node, !- Air Inlet Node Name Perimeter_mid_ZN_2 VAV Box Outlet Node; !- Air Outlet Node Name Coil:Heating:Electric, Perimeter_mid_ZN_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1.0000, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Perimeter_mid_ZN_1 VAV Box Damper Node, !- Air Inlet Node Name Perimeter_mid_ZN_1 VAV Box Outlet Node; !- Air Outlet Node Name Coil:Heating:Electric, Perimeter_mid_ZN_4 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1.0000, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Perimeter_mid_ZN_4 VAV Box Damper Node, !- Air Inlet Node Name Perimeter_mid_ZN_4 VAV Box Outlet Node; !- Air Outlet Node Name !- =========== ALL OBJECTS IN CLASS: COIL:GAS:HEATING =========== Coil:Heating:Fuel, PACU_VAV_bot_HeatC, !- Name ALWAYS_ON, !- Availability Schedule Name NaturalGas, !- Fuel Type 0.81, !- Burner Efficiency AUTOSIZE, !- Nominal Capacity {W} PACU_VAV_bot_CoolC-PACU_VAV_bot_HeatCNode, !- Air Inlet Node Name PACU_VAV_bot_HeatC-PACU_VAV_bot FanNode, !- Air Outlet Node Name PACU_VAV_bot_HeatC-PACU_VAV_bot FanNode; !- Temperature Setpoint Node Name Coil:Heating:Fuel, PACU_VAV_mid_HeatC, !- Name ALWAYS_ON, !- Availability Schedule Name NaturalGas, !- Fuel Type 0.81, !- Burner Efficiency AUTOSIZE, !- Nominal Capacity {W} PACU_VAV_mid_CoolC-PACU_VAV_mid_HeatCNode, !- Air Inlet Node Name PACU_VAV_mid_HeatC-PACU_VAV_mid FanNode, !- Air Outlet Node Name PACU_VAV_mid_HeatC-PACU_VAV_mid FanNode; !- Temperature Setpoint Node Name Coil:Heating:Fuel, PACU_VAV_top_HeatC, !- Name ALWAYS_ON, !- Availability Schedule Name NaturalGas, !- Fuel Type 0.81, !- Burner Efficiency AUTOSIZE, !- Nominal Capacity {W} PACU_VAV_top_CoolC-PACU_VAV_top_HeatCNode, !- Air Inlet Node Name PACU_VAV_top_HeatC-PACU_VAV_top FanNode, !- Air Outlet Node Name PACU_VAV_top_HeatC-PACU_VAV_top FanNode; !- Temperature Setpoint Node Name !- =========== ALL OBJECTS IN CLASS: COIL:DX:MULTISPEED:COOLINGEMPIRICAL =========== Coil:Cooling:DX:TwoSpeed, PACU_VAV_bot_CoolC DXCoil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- High Speed Gross Rated Total Cooling Capacity {W} Sep 25, 2012: DX_TwoSpeedObject_from_VAV AUTOSIZE, !- High Speed Gross Rated Sensible Heat Ratio Sep 25, 2012: DX_TwoSpeedObject_from_VAV 3.39928881549157, !- High Speed Gross Rated Cooling COP {W/W} Sep 25, 2012: DX_TwoSpeedObject_from_VAV AUTOSIZE, !- High Speed Rated Air Flow Rate {m3/s} Sep 25, 2012: DX_TwoSpeedObject_from_VAV , !- Unit Internal Static Air Pressure {Pa} PACU_VAV_bot_OA-PACU_VAV_bot_CoolCNode, !- Air Inlet Node Name PACU_VAV_bot_CoolC-PACU_VAV_bot_HeatCNode, !- Air Outlet Node Name FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_CapFT, !- Total Cooling Capacity Function of Temperature Curve Name FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_FFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_EIRFT, !- Energy Input Ratio Function of Temperature Curve Name FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name FURNACE_PACU_VAV_CoolCIEA_HVAC_BESTEST_9ton-PLR, !- Part Load Fraction Correlation Curve Name AUTOSIZE, !- Low Speed Gross Rated Total Cooling Capacity {W} Sep 25, 2012: DX_TwoSpeedObject_from_VAV AUTOSIZE, !- Low Speed Gross Rated Sensible Heat Ratio Sep 25, 2012: DX_TwoSpeedObject_from_VAV 3.39928881549157, !- Low Speed Gross Rated Cooling COP {W/W} Sep 25, 2012: DX_TwoSpeedObject_from_VAV AUTOSIZE, !- Low Speed Rated Air Flow Rate {m3/s} Sep 25, 2012: DX_TwoSpeedObject_from_VAV FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_CapFT, !- Low Speed Total Cooling Capacity Function of Temperature Curve Name FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_EIRFT, !- Low Speed Energy Input Ratio Function of Temperature Curve Name ; !- Condenser Air Inlet Node Name Coil:Cooling:DX:TwoSpeed, PACU_VAV_mid_CoolC DXCoil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- High Speed Gross Rated Total Cooling Capacity {W} Sep 25, 2012: DX_TwoSpeedObject_from_VAV AUTOSIZE, !- High Speed Gross Rated Sensible Heat Ratio Sep 25, 2012: DX_TwoSpeedObject_from_VAV 3.39928881549157, !- High Speed Gross Rated Cooling COP {W/W} Sep 25, 2012: DX_TwoSpeedObject_from_VAV AUTOSIZE, !- High Speed Rated Air Flow Rate {m3/s} Sep 25, 2012: DX_TwoSpeedObject_from_VAV , !- Unit Internal Static Air Pressure {Pa} PACU_VAV_mid_OA-PACU_VAV_mid_CoolCNode, !- Air Inlet Node Name PACU_VAV_mid_CoolC-PACU_VAV_mid_HeatCNode, !- Air Outlet Node Name FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_CapFT, !- Total Cooling Capacity Function of Temperature Curve Name FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_FFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_EIRFT, !- Energy Input Ratio Function of Temperature Curve Name FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name FURNACE_PACU_VAV_CoolCIEA_HVAC_BESTEST_9ton-PLR, !- Part Load Fraction Correlation Curve Name AUTOSIZE, !- Low Speed Gross Rated Total Cooling Capacity {W} Sep 25, 2012: DX_TwoSpeedObject_from_VAV AUTOSIZE, !- Low Speed Gross Rated Sensible Heat Ratio Sep 25, 2012: DX_TwoSpeedObject_from_VAV 3.39928881549157, !- Low Speed Gross Rated Cooling COP {W/W} Sep 25, 2012: DX_TwoSpeedObject_from_VAV AUTOSIZE, !- Low Speed Rated Air Flow Rate {m3/s} Sep 25, 2012: DX_TwoSpeedObject_from_VAV FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_CapFT, !- Low Speed Total Cooling Capacity Function of Temperature Curve Name FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_EIRFT, !- Low Speed Energy Input Ratio Function of Temperature Curve Name ; !- Condenser Air Inlet Node Name Coil:Cooling:DX:TwoSpeed, PACU_VAV_top_CoolC DXCoil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- High Speed Gross Rated Total Cooling Capacity {W} Sep 25, 2012: DX_TwoSpeedObject_from_VAV AUTOSIZE, !- High Speed Gross Rated Sensible Heat Ratio Sep 25, 2012: DX_TwoSpeedObject_from_VAV 3.39928881549157, !- High Speed Gross Rated Cooling COP {W/W} Sep 25, 2012: DX_TwoSpeedObject_from_VAV AUTOSIZE, !- High Speed Rated Air Flow Rate {m3/s} Sep 25, 2012: DX_TwoSpeedObject_from_VAV , !- Unit Internal Static Air Pressure {Pa} PACU_VAV_top_OA-PACU_VAV_top_CoolCNode, !- Air Inlet Node Name PACU_VAV_top_CoolC-PACU_VAV_top_HeatCNode, !- Air Outlet Node Name FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_CapFT, !- Total Cooling Capacity Function of Temperature Curve Name FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_FFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_EIRFT, !- Energy Input Ratio Function of Temperature Curve Name FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name FURNACE_PACU_VAV_CoolCIEA_HVAC_BESTEST_9ton-PLR, !- Part Load Fraction Correlation Curve Name AUTOSIZE, !- Low Speed Gross Rated Total Cooling Capacity {W} Sep 25, 2012: DX_TwoSpeedObject_from_VAV AUTOSIZE, !- Low Speed Gross Rated Sensible Heat Ratio Sep 25, 2012: DX_TwoSpeedObject_from_VAV 3.39928881549157, !- Low Speed Gross Rated Cooling COP {W/W} Sep 25, 2012: DX_TwoSpeedObject_from_VAV AUTOSIZE, !- Low Speed Rated Air Flow Rate {m3/s} Sep 25, 2012: DX_TwoSpeedObject_from_VAV FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_CapFT, !- Low Speed Total Cooling Capacity Function of Temperature Curve Name FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_EIRFT, !- Low Speed Energy Input Ratio Function of Temperature Curve Name ; !- Condenser Air Inlet Node Name !- =========== ALL OBJECTS IN CLASS: FAN:SIMPLE:VARIABLEVOLUME =========== Fan:VariableVolume, PACU_VAV_bot Fan, !- Name HVACOperationSchd, !- Availability Schedule Name 0.6045, !- Fan Total Efficiency 1314.72, !- Pressure Rise {Pa} AUTOSIZE, !- Maximum Flow Rate {m3/s} Fraction, !- Fan Power Minimum Flow Rate Input Method 0.25, !- Fan Power Minimum Flow Fraction , !- Fan Power Minimum Air Flow Rate {m3/s} 0.93, !- Motor Efficiency 1.0, !- Motor In Airstream Fraction 0.0408, !- Fan Power Coefficient 1 0.088, !- Fan Power Coefficient 2 -0.0729, !- Fan Power Coefficient 3 0.9437, !- Fan Power Coefficient 4 0, !- Fan Power Coefficient 5 PACU_VAV_bot_HeatC-PACU_VAV_bot FanNode, !- Air Inlet Node Name PACU_VAV_bot Supply Equipment Outlet Node; !- Air Outlet Node Name Fan:VariableVolume, PACU_VAV_mid Fan, !- Name HVACOperationSchd, !- Availability Schedule Name 0.6006, !- Fan Total Efficiency 1389.42, !- Pressure Rise {Pa} AUTOSIZE, !- Maximum Flow Rate {m3/s} Fraction, !- Fan Power Minimum Flow Rate Input Method 0.25, !- Fan Power Minimum Flow Fraction , !- Fan Power Minimum Air Flow Rate {m3/s} 0.924, !- Motor Efficiency 1.0, !- Motor In Airstream Fraction 0.0408, !- Fan Power Coefficient 1 0.088, !- Fan Power Coefficient 2 -0.0729, !- Fan Power Coefficient 3 0.9437, !- Fan Power Coefficient 4 0, !- Fan Power Coefficient 5 PACU_VAV_mid_HeatC-PACU_VAV_mid FanNode, !- Air Inlet Node Name PACU_VAV_mid Supply Equipment Outlet Node; !- Air Outlet Node Name Fan:VariableVolume, PACU_VAV_top Fan, !- Name HVACOperationSchd, !- Availability Schedule Name 0.6006, !- Fan Total Efficiency 1389.42, !- Pressure Rise {Pa} AUTOSIZE, !- Maximum Flow Rate {m3/s} Fraction, !- Fan Power Minimum Flow Rate Input Method 0.25, !- Fan Power Minimum Flow Fraction , !- Fan Power Minimum Air Flow Rate {m3/s} 0.924, !- Motor Efficiency 1.0, !- Motor In Airstream Fraction 0.0408, !- Fan Power Coefficient 1 0.088, !- Fan Power Coefficient 2 -0.0729, !- Fan Power Coefficient 3 0.9437, !- Fan Power Coefficient 4 0, !- Fan Power Coefficient 5 PACU_VAV_top_HeatC-PACU_VAV_top FanNode, !- Air Inlet Node Name PACU_VAV_top Supply Equipment Outlet Node; !- Air Outlet Node Name !- =========== ALL OBJECTS IN CLASS: WATER USE EQUIPMENT =========== WaterUse:Equipment, Core_bottom sub cat, !- Name WaterUse, !- End-Use Subcategory 3.57511e-06, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name Core_bottom sub cat Temp Sched, !- Target Temperature Schedule Name Core_bottom sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Core_bottom, !- Zone Name Core_bottom sub cat Sensible fract sched, !- Sensible Fraction Schedule Name Core_bottom sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, Core_mid sub cat, !- Name WaterUse, !- End-Use Subcategory 3.57511e-06, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name Core_mid sub cat Temp Sched, !- Target Temperature Schedule Name Core_mid sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Core_mid, !- Zone Name Core_mid sub cat Sensible fract sched, !- Sensible Fraction Schedule Name Core_mid sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, Core_top sub cat, !- Name WaterUse, !- End-Use Subcategory 3.57511e-06, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name Core_top sub cat Temp Sched, !- Target Temperature Schedule Name Core_top sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Core_top, !- Zone Name Core_top sub cat Sensible fract sched, !- Sensible Fraction Schedule Name Core_top sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, Perimeter_top_ZN_3 sub cat, !- Name WaterUse, !- End-Use Subcategory 3.57511e-06, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name Perimeter_top_ZN_3 sub cat Temp Sched, !- Target Temperature Schedule Name Perimeter_top_ZN_3 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Perimeter_top_ZN_3, !- Zone Name Perimeter_top_ZN_3 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name Perimeter_top_ZN_3 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, Perimeter_top_ZN_2 sub cat, !- Name WaterUse, !- End-Use Subcategory 3.57511e-06, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name Perimeter_top_ZN_2 sub cat Temp Sched, !- Target Temperature Schedule Name Perimeter_top_ZN_2 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Perimeter_top_ZN_2, !- Zone Name Perimeter_top_ZN_2 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name Perimeter_top_ZN_2 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, Perimeter_top_ZN_1 sub cat, !- Name WaterUse, !- End-Use Subcategory 3.57511e-06, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name Perimeter_top_ZN_1 sub cat Temp Sched, !- Target Temperature Schedule Name Perimeter_top_ZN_1 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Perimeter_top_ZN_1, !- Zone Name Perimeter_top_ZN_1 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name Perimeter_top_ZN_1 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, Perimeter_top_ZN_4 sub cat, !- Name WaterUse, !- End-Use Subcategory 3.57511e-06, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name Perimeter_top_ZN_4 sub cat Temp Sched, !- Target Temperature Schedule Name Perimeter_top_ZN_4 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Perimeter_top_ZN_4, !- Zone Name Perimeter_top_ZN_4 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name Perimeter_top_ZN_4 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, Perimeter_bot_ZN_3 sub cat, !- Name WaterUse, !- End-Use Subcategory 3.57511e-06, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name Perimeter_bot_ZN_3 sub cat Temp Sched, !- Target Temperature Schedule Name Perimeter_bot_ZN_3 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Perimeter_bot_ZN_3, !- Zone Name Perimeter_bot_ZN_3 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name Perimeter_bot_ZN_3 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, Perimeter_bot_ZN_2 sub cat, !- Name WaterUse, !- End-Use Subcategory 3.57511e-06, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name Perimeter_bot_ZN_2 sub cat Temp Sched, !- Target Temperature Schedule Name Perimeter_bot_ZN_2 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Perimeter_bot_ZN_2, !- Zone Name Perimeter_bot_ZN_2 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name Perimeter_bot_ZN_2 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, Perimeter_bot_ZN_1 sub cat, !- Name WaterUse, !- End-Use Subcategory 3.57511e-06, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name Perimeter_bot_ZN_1 sub cat Temp Sched, !- Target Temperature Schedule Name Perimeter_bot_ZN_1 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Perimeter_bot_ZN_1, !- Zone Name Perimeter_bot_ZN_1 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name Perimeter_bot_ZN_1 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, Perimeter_bot_ZN_4 sub cat, !- Name WaterUse, !- End-Use Subcategory 3.57511e-06, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name Perimeter_bot_ZN_4 sub cat Temp Sched, !- Target Temperature Schedule Name Perimeter_bot_ZN_4 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Perimeter_bot_ZN_4, !- Zone Name Perimeter_bot_ZN_4 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name Perimeter_bot_ZN_4 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, Perimeter_mid_ZN_3 sub cat, !- Name WaterUse, !- End-Use Subcategory 3.57511e-06, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name Perimeter_mid_ZN_3 sub cat Temp Sched, !- Target Temperature Schedule Name Perimeter_mid_ZN_3 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Perimeter_mid_ZN_3, !- Zone Name Perimeter_mid_ZN_3 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name Perimeter_mid_ZN_3 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, Perimeter_mid_ZN_2 sub cat, !- Name WaterUse, !- End-Use Subcategory 3.57511e-06, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name Perimeter_mid_ZN_2 sub cat Temp Sched, !- Target Temperature Schedule Name Perimeter_mid_ZN_2 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Perimeter_mid_ZN_2, !- Zone Name Perimeter_mid_ZN_2 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name Perimeter_mid_ZN_2 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, Perimeter_mid_ZN_1 sub cat, !- Name WaterUse, !- End-Use Subcategory 3.57511e-06, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name Perimeter_mid_ZN_1 sub cat Temp Sched, !- Target Temperature Schedule Name Perimeter_mid_ZN_1 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Perimeter_mid_ZN_1, !- Zone Name Perimeter_mid_ZN_1 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name Perimeter_mid_ZN_1 sub cat Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, Perimeter_mid_ZN_4 sub cat, !- Name WaterUse, !- End-Use Subcategory 3.57511e-06, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name Perimeter_mid_ZN_4 sub cat Temp Sched, !- Target Temperature Schedule Name Perimeter_mid_ZN_4 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Perimeter_mid_ZN_4, !- Zone Name Perimeter_mid_ZN_4 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name Perimeter_mid_ZN_4 sub cat Latent fract sched; !- Latent Fraction Schedule Name !- =========== ALL OBJECTS IN CLASS: WATER USE CONNECTIONS =========== WaterUse:Connections, Core_bottom sub cat, !- Name Core_bottom sub cat Water Inlet Node, !- Inlet Node Name Core_bottom sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Core_bottom sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, Core_mid sub cat, !- Name Core_mid sub cat Water Inlet Node, !- Inlet Node Name Core_mid sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Core_mid sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, Core_top sub cat, !- Name Core_top sub cat Water Inlet Node, !- Inlet Node Name Core_top sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Core_top sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, Perimeter_top_ZN_3 sub cat, !- Name Perimeter_top_ZN_3 sub cat Water Inlet Node, !- Inlet Node Name Perimeter_top_ZN_3 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Perimeter_top_ZN_3 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, Perimeter_top_ZN_2 sub cat, !- Name Perimeter_top_ZN_2 sub cat Water Inlet Node, !- Inlet Node Name Perimeter_top_ZN_2 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Perimeter_top_ZN_2 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, Perimeter_top_ZN_1 sub cat, !- Name Perimeter_top_ZN_1 sub cat Water Inlet Node, !- Inlet Node Name Perimeter_top_ZN_1 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Perimeter_top_ZN_1 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, Perimeter_top_ZN_4 sub cat, !- Name Perimeter_top_ZN_4 sub cat Water Inlet Node, !- Inlet Node Name Perimeter_top_ZN_4 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Perimeter_top_ZN_4 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, Perimeter_bot_ZN_3 sub cat, !- Name Perimeter_bot_ZN_3 sub cat Water Inlet Node, !- Inlet Node Name Perimeter_bot_ZN_3 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Perimeter_bot_ZN_3 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, Perimeter_bot_ZN_2 sub cat, !- Name Perimeter_bot_ZN_2 sub cat Water Inlet Node, !- Inlet Node Name Perimeter_bot_ZN_2 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Perimeter_bot_ZN_2 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, Perimeter_bot_ZN_1 sub cat, !- Name Perimeter_bot_ZN_1 sub cat Water Inlet Node, !- Inlet Node Name Perimeter_bot_ZN_1 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Perimeter_bot_ZN_1 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, Perimeter_bot_ZN_4 sub cat, !- Name Perimeter_bot_ZN_4 sub cat Water Inlet Node, !- Inlet Node Name Perimeter_bot_ZN_4 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Perimeter_bot_ZN_4 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, Perimeter_mid_ZN_3 sub cat, !- Name Perimeter_mid_ZN_3 sub cat Water Inlet Node, !- Inlet Node Name Perimeter_mid_ZN_3 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Perimeter_mid_ZN_3 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, Perimeter_mid_ZN_2 sub cat, !- Name Perimeter_mid_ZN_2 sub cat Water Inlet Node, !- Inlet Node Name Perimeter_mid_ZN_2 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Perimeter_mid_ZN_2 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, Perimeter_mid_ZN_1 sub cat, !- Name Perimeter_mid_ZN_1 sub cat Water Inlet Node, !- Inlet Node Name Perimeter_mid_ZN_1 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Perimeter_mid_ZN_1 sub cat; !- Water Use Equipment 1 Name WaterUse:Connections, Perimeter_mid_ZN_4 sub cat, !- Name Perimeter_mid_ZN_4 sub cat Water Inlet Node, !- Inlet Node Name Perimeter_mid_ZN_4 sub cat Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Perimeter_mid_ZN_4 sub cat; !- Water Use Equipment 1 Name !No PV for this case !- =========== ALL OBJECTS IN CLASS: REPORT METERFILEONLY =========== Output:Meter:MeterFileOnly,Electricity:Facility,Hourly; Output:Meter:MeterFileOnly,ElectricityNet:Facility,Hourly; Output:Meter:MeterFileOnly,Gas:Facility,Hourly; !- =========== ALL OBJECTS IN CLASS: REPORT =========== Output:Surfaces:Drawing,DXF; Output:Surfaces:List,Details; Output:VariableDictionary,IDF; Output:Constructions,Constructions; !- =========== ALL OBJECTS IN CLASS: REPORT:TABLE:STYLE =========== OutputControl:Table:Style, CommaAndHTML; !- Column Separator !- =========== ALL OBJECTS IN CLASS: OUTPUTCONTROL:REPORTINGTOLERANCES =========== OutputControl:ReportingTolerances, 0.556, !- Tolerance for Time Heating Setpoint Not Met {deltaC} 0.556; !- Tolerance for Time Cooling Setpoint Not Met {deltaC} !- =========== ALL OBJECTS IN CLASS: OUTPUT:VARIABLE =========== ! Output:Variable,*,Site Outdoor Air Drybulb Temperature,Hourly; ! Output:Variable,*,Site Outdoor Air Wetbulb Temperature,Hourly; ! Output:Variable,MinOA_MotorizedDamper_Sched,Schedule Value,Hourly; ! ! ! Outdoor Air Flow ! ! Output:Variable,PACU_VAV_bot_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PACU_VAV_mid_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PACU_VAV_top_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PACU_VAV_bot Heat Recovery Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PACU_VAV_mid Heat Recovery Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PACU_VAV_top Heat Recovery Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! ! Return Air Flow ! ! Output:Variable,PACU_VAV_bot Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PACU_VAV_mid Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PACU_VAV_top Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PACU_VAV_bot Supply Equipment Inlet Node,System Node Temperature,Hourly; ! Output:Variable,PACU_VAV_mid Supply Equipment Inlet Node,System Node Temperature,Hourly; ! Output:Variable,PACU_VAV_top Supply Equipment Inlet Node,System Node Temperature,Hourly; ! Output:Variable,PACU_VAV_bot Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,PACU_VAV_mid Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,PACU_VAV_top Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! ! ! Supply Air Flow ! ! Output:Variable,PACU_VAV_bot Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PACU_VAV_mid Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PACU_VAV_top Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PACU_VAV_bot Supply Equipment Outlet Node,System Node Temperature,Hourly; ! Output:Variable,PACU_VAV_mid Supply Equipment Outlet Node,System Node Temperature,Hourly; ! Output:Variable,PACU_VAV_top Supply Equipment Outlet Node,System Node Temperature,Hourly; ! Output:Variable,PACU_VAV_bot Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,PACU_VAV_mid Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,PACU_VAV_top Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! ! ! Coil Load ! ! Output:Variable,*,Air System Cooling Coil Total Cooling Energy,Hourly; ! Output:Variable,*,Air System Heating Coil Total Heating Energy,Hourly; ! ! ! SHW ! ! Output:Variable,*,Water Heater Heating Rate,Hourly; ! ! ! Fan and Pump ! ! Output:Variable,*,Fan Electric Power,hourly; !- HVAC Average W ! Output:Variable,*,Pump Electric Power,hourly; !- HVAC Average W ! Output:Variable,*,Humidifier Electric Power,hourly; !- HVAC Average W ! ! ! Utility and Submeter ! ! Output:Meter,Electricity:Facility,Hourly; ! Output:Meter,Gas:Facility,Hourly; ! Output:Meter,InteriorLights:Electricity,Hourly; ! Output:Meter,ExteriorLights:Electricity,Hourly; ! Output:Meter,InteriorEquipment:Electricity,Hourly; ! Output:Meter,ExteriorEquipment:Electricity,Hourly; ! Output:Meter,Fans:Electricity,Hourly; ! Output:Meter,Pumps:Electricity,Hourly; ! Output:Meter,Heating:Electricity,Hourly; ! Output:Meter,Cooling:Electricity,Hourly; ! Output:Meter,HeatRejection:Electricity,Hourly; ! Output:Meter,Humidifier:Electricity,Hourly; ! Output:Meter,HeatRecovery:Electricity,Hourly; ! Output:Meter,DHW:Electricity,Hourly; ! Output:Meter,Cogeneration:Electricity,Hourly; ! Output:Meter,Refrigeration:Electricity,Hourly; ! Output:Meter,WaterSystems:Electricity,Hourly; ! ! Output:Meter,InteriorLights:Gas,Hourly; ! Output:Meter,ExteriorLights:Gas,Hourly; ! Output:Meter,InteriorEquipment:Gas,Hourly; ! Output:Meter,ExteriorEquipment:Gas,Hourly; ! Output:Meter,Fans:Gas,Hourly; ! Output:Meter,Pumps:Gas,Hourly; ! Output:Meter,Heating:Gas,Hourly; ! Output:Meter,Cooling:Gas,Hourly; ! Output:Meter,HeatRejection:Gas,Hourly; ! Output:Meter,Humidifier:Gas,Hourly; ! Output:Meter,HeatRecovery:Gas,Hourly; ! Output:Meter,DHW:Gas,Hourly; ! Output:Meter,Cogeneration:Gas,Hourly; ! Output:Meter,Refrigeration:Gas,Hourly; ! Output:Meter,WaterSystems:Gas,Hourly; !- =========== ALL OBJECTS IN CLASS: REPORT:TABLE:PREDEFINED =========== Output:Table:SummaryReports, AllSummaryAndMonthly, !- Report 1 Name Standard62.1Summary; !- Report 2 Name !- =========== ALL OBJECTS IN CLASS: REPORT:TABLE:MONTHLY =========== Output:Table:Monthly, NameHolderMonthlySummary TaskPurpose ProgressIndicator, !- Name ProgressIndicator,ForDetermination2019, ... 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary CodeName ASHRAE901, !- Name ASHRAE901, ASHRAE1891, IECC, Title24, ORSC, IGCC, ... 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary CodeYear 2019, !- Name all years for ASHRAE90.1, IECC, ASHRAE189.1 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary CodeAmendment NoneAmend, !- Name StateAmend,EEM, NoneAmend for national or state without amendment 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary PrototypeName OfficeMedium, !- Name 16 Prototypes 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary TaskScope National, !- Name National, State, City 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary State National, !- Name National for national analysis, NewYork, Utah,... for state analysis, or city name for city analysis. Spell out the name of the state without space between words 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary ClimateZone 6A, !- Name 0-8 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary RepresentCity USA_MN_Rochester, !- Name representative city like Honolulu for national, for each state, for city analysis. this is not the city of the weather file. The weather city will be extracted from epw file 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 !- =========== ALL OBJECTS IN CLASS: CONTROLLER:MECHANICALVENTILATION =========== Controller:MechanicalVentilation, PACU_VAV_BOT_DCV, !- Name MinOA_MotorizedDamper_Sched,!- Availability Schedule Name Yes, !- Demand Controlled Ventilation VentilationRateProcedure,!- System Outdoor Air Method , !- Zone Maximum Outdoor Air Fraction {dimensionless} Core_bottom, !- Zone 1 Name CM DSOA Core_bottom, !- Design Specification Outdoor Air Object Name 1 CM DSZAD Core_bottom, !- Design Specification Zone Air Distribution Object Name 1 Perimeter_bot_ZN_1, !- Zone 2 Name CM DSOA Perimeter_bot_ZN_1, !- Design Specification Outdoor Air Object Name 2 CM DSZAD Perimeter_bot_ZN_1, !- Design Specification Zone Air Distribution Object Name 2 Perimeter_bot_ZN_2, !- Zone 3 Name CM DSOA Perimeter_bot_ZN_2, !- Design Specification Outdoor Air Object Name 3 CM DSZAD Perimeter_bot_ZN_2, !- Design Specification Zone Air Distribution Object Name 3 Perimeter_bot_ZN_3, !- Zone 4 Name CM DSOA Perimeter_bot_ZN_3, !- Design Specification Outdoor Air Object Name 4 CM DSZAD Perimeter_bot_ZN_3, !- Design Specification Zone Air Distribution Object Name 4 Perimeter_bot_ZN_4, !- Zone 5 Name CM DSOA Perimeter_bot_ZN_4, !- Design Specification Outdoor Air Object Name 5 CM DSZAD Perimeter_bot_ZN_4; !- Design Specification Zone Air Distribution Object Name 5 DesignSpecification:ZoneAirDistribution, CM DSZAD Core_bottom, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Perimeter_bot_ZN_1, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Perimeter_bot_ZN_2, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Perimeter_bot_ZN_3, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Perimeter_bot_ZN_4, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:OutdoorAir, CM DSOA Core_bottom, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Perimeter_bot_ZN_1, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Perimeter_bot_ZN_2, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Perimeter_bot_ZN_3, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Perimeter_bot_ZN_4, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} Controller:MechanicalVentilation, PACU_VAV_TOP_DCV, !- Name MinOA_MotorizedDamper_Sched,!- Availability Schedule Name Yes, !- Demand Controlled Ventilation VentilationRateProcedure,!- System Outdoor Air Method , !- Zone Maximum Outdoor Air Fraction {dimensionless} Core_top, !- Zone 1 Name CM DSOA Core_top, !- Design Specification Outdoor Air Object Name 1 CM DSZAD Core_top, !- Design Specification Zone Air Distribution Object Name 1 Perimeter_top_ZN_1, !- Zone 2 Name CM DSOA Perimeter_top_ZN_1, !- Design Specification Outdoor Air Object Name 2 CM DSZAD Perimeter_top_ZN_1, !- Design Specification Zone Air Distribution Object Name 2 Perimeter_top_ZN_2, !- Zone 3 Name CM DSOA Perimeter_top_ZN_2, !- Design Specification Outdoor Air Object Name 3 CM DSZAD Perimeter_top_ZN_2, !- Design Specification Zone Air Distribution Object Name 3 Perimeter_top_ZN_3, !- Zone 4 Name CM DSOA Perimeter_top_ZN_3, !- Design Specification Outdoor Air Object Name 4 CM DSZAD Perimeter_top_ZN_3, !- Design Specification Zone Air Distribution Object Name 4 Perimeter_top_ZN_4, !- Zone 5 Name CM DSOA Perimeter_top_ZN_4, !- Design Specification Outdoor Air Object Name 5 CM DSZAD Perimeter_top_ZN_4; !- Design Specification Zone Air Distribution Object Name 5 DesignSpecification:ZoneAirDistribution, CM DSZAD Core_top, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Perimeter_top_ZN_1, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Perimeter_top_ZN_2, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Perimeter_top_ZN_3, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Perimeter_top_ZN_4, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:OutdoorAir, CM DSOA Core_top, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Perimeter_top_ZN_1, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Perimeter_top_ZN_2, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Perimeter_top_ZN_3, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Perimeter_top_ZN_4, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} Controller:MechanicalVentilation, PACU_VAV_MID_DCV, !- Name MinOA_MotorizedDamper_Sched,!- Availability Schedule Name Yes, !- Demand Controlled Ventilation VentilationRateProcedure,!- System Outdoor Air Method , !- Zone Maximum Outdoor Air Fraction {dimensionless} Core_mid, !- Zone 1 Name CM DSOA Core_mid, !- Design Specification Outdoor Air Object Name 1 CM DSZAD Core_mid, !- Design Specification Zone Air Distribution Object Name 1 Perimeter_mid_ZN_1, !- Zone 2 Name CM DSOA Perimeter_mid_ZN_1, !- Design Specification Outdoor Air Object Name 2 CM DSZAD Perimeter_mid_ZN_1, !- Design Specification Zone Air Distribution Object Name 2 Perimeter_mid_ZN_2, !- Zone 3 Name CM DSOA Perimeter_mid_ZN_2, !- Design Specification Outdoor Air Object Name 3 CM DSZAD Perimeter_mid_ZN_2, !- Design Specification Zone Air Distribution Object Name 3 Perimeter_mid_ZN_3, !- Zone 4 Name CM DSOA Perimeter_mid_ZN_3, !- Design Specification Outdoor Air Object Name 4 CM DSZAD Perimeter_mid_ZN_3, !- Design Specification Zone Air Distribution Object Name 4 Perimeter_mid_ZN_4, !- Zone 5 Name CM DSOA Perimeter_mid_ZN_4, !- Design Specification Outdoor Air Object Name 5 CM DSZAD Perimeter_mid_ZN_4; !- Design Specification Zone Air Distribution Object Name 5 DesignSpecification:ZoneAirDistribution, CM DSZAD Core_mid, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Perimeter_mid_ZN_1, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Perimeter_mid_ZN_2, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Perimeter_mid_ZN_3, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:ZoneAirDistribution, CM DSZAD Perimeter_mid_ZN_4, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:OutdoorAir, CM DSOA Core_mid, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Perimeter_mid_ZN_1, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Perimeter_mid_ZN_2, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Outdoor Air Flow per Zone {m3/s} , !- Outdoor Air Flow Air Changes per Hour PERIMETER_MID_ZN_2_OA_Mult; !- Outdoor Air Schedule Name DesignSpecification:OutdoorAir, CM DSOA Perimeter_mid_ZN_3, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, CM DSOA Perimeter_mid_ZN_4, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} EnergyManagementSystem:Sensor, Facility_Int_LTG, !- Name , !- Output:Variable or Output:Meter Index Key Name InteriorLights:Electricity; !- Output:Variable or Output:Meter Name EnergyManagementSystem:GlobalVariable, Wired_LTG; !- Erl Variable 1 Name EnergyManagementSystem:Program, Transformer_Load_Prog, !- Name SET Wired_LTG = Facility_Int_LTG*0.0281; !- Program Line 1 EnergyManagementSystem:ProgramCallingManager, Transformer_Load_Prog_Manager, !- Name AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point Transformer_Load_Prog; !- Program Name 1 EnergyManagementSystem:OutputVariable, Wired_LTG, !- Name Wired_LTG, !- EMS Variable Name Summed, !- Type of Data in Variable ZoneTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name J; !- Units Meter:Custom, Wired_LTG_Electricity, !- Name Electricity, !- Fuel Type , !- Key Name 1 Wired_LTG; !- Output Variable or Meter Name 1 Meter:CustomDecrement, Wired_Int_EQUIP, !- Name Electricity, !- Fuel Type InteriorEquipment:Electricity, !- Source Meter Name Core_bottom_Elevators_Equip, !- Key Name 1 Electric Equipment Electric Energy; !- Output Variable or Meter Name 1 ElectricLoadCenter:Transformer, Transformer 1, !- Name Always_On, !- Availability Schedule Name PowerInFromGrid, !- Transformer Usage , !- Zone Name , !- Radiative Fraction 45000, !- Rated Capacity {VA} 3, !- Phase Aluminum, !- Conductor Material 150, !- Full Load Temperature Rise {C} 0.1, !- Fraction of Eddy Current Losses NominalEfficiency, !- Performance Input Method , !- Rated No Load Loss {W} , !- Rated Load Loss {W} 0.984, !- Nameplate Efficiency 0.35, !- Per Unit Load for Nameplate Efficiency 75, !- Reference Temperature for Nameplate Efficiency {C} , !- Per Unit Load for Maximum Efficiency Yes, !- Consider Transformer Loss for Utility Cost Wired_LTG_Electricity, !- Meter 1 Name Wired_INT_EQUIP; !- Meter 2 Name EnergyManagementSystem:Sensor, OAT, !- Name Environment, !- Output:Variable or Output:Meter Index Key Name Site Outdoor Air Drybulb Temperature; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Actuator, CLGSETP_SCH_Actuator, !- Name CLGSETP_SCH_Yes_Optimum, !- Actuated Component Unique Name Schedule:Compact, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:Actuator, CLGSETP_SCH_w_SB_Actuator, !- Name CLGSETP_SCH_Yes_Optimum_w_SB, !- Actuated Component Unique Name Schedule:Compact, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:Actuator, HTGSETP_SCH_Actuator, !- Name HTGSETP_SCH_Yes_Optimum, !- Actuated Component Unique Name Schedule:Compact, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:Actuator, HTGSETP_SCH_w_SB_Actuator, !- Name HTGSETP_SCH_Yes_Optimum_w_SB, !- Actuated Component Unique Name Schedule:Compact, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:ProgramCallingManager, OA_BASED_OPTIMUM_START_EMS_Program Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point OA_BASED_OPTIMUM_START_EMS_Program; !- Program Name 1 EnergyManagementSystem:Program, OA_BASED_OPTIMUM_START_EMS_Program, !- Name IF DaylightSavings==0 && DayOfWeek>1 && Hour==5 && OAT<23.9 && OAT>1.7, !- Program Line 1 SET CLGSETP_SCH_Actuator = 26.7, !- Program Line 2 SET HTGSETP_SCH_Actuator = 15.6, !- SET CLGSETP_SCH_w_SB_Actuator = 26.7, !- SET HTGSETP_SCH_w_SB_Actuator = 15.6, !- ELSEIF DaylightSavings==1 && DayOfWeek>1 && Hour==4 && OAT<23.9 && OAT>1.7, !- SET CLGSETP_SCH_Actuator = 26.7, !- SET HTGSETP_SCH_Actuator = 15.6, !- SET CLGSETP_SCH_w_SB_Actuator = 26.7, !- SET HTGSETP_SCH_w_SB_Actuator = 15.6, !- ELSE, !- SET CLGSETP_SCH_Actuator = NULL, !- SET HTGSETP_SCH_Actuator = NULL, !- SET CLGSETP_SCH_w_SB_Actuator = NULL, !- SET HTGSETP_SCH_w_SB_Actuator = NULL, !- ENDIF; !- EnergyManagementSystem:Sensor, Core_bottom_LSr, !- Name Core_bottom, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Core_bottom_Occ_Sensor, !- Name Core_bottom, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Core_bottom_Area, !- Name Core_bottom, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Core_bottom_Light_Actuator, !- Name Core_bottom_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Core_bottom_Light_EMS_Program, !- Name SET Core_bottom_LSr_IP =0.093*Core_bottom_LSr/Core_bottom_Area, ! Calculate the actual LPD for each hour IF (Core_bottom_Occ_Sensor <= 0) && (Core_bottom_LSr_IP >= 0.02), SET Core_bottom_Light_Actuator = 0.02*Core_bottom_Area/0.09290304, ELSE, SET Core_bottom_Light_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Core_bottom_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Core_bottom_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Core_mid_LSr, !- Name Core_mid, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Core_mid_Occ_Sensor, !- Name Core_mid, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Core_mid_Area, !- Name Core_mid, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Core_mid_Light_Actuator, !- Name Core_mid_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Core_mid_Light_EMS_Program, !- Name SET Core_mid_LSr_IP =0.093*Core_mid_LSr/Core_mid_Area, ! Calculate the actual LPD for each hour IF (Core_mid_Occ_Sensor <= 0) && (Core_mid_LSr_IP >= 0.02), SET Core_mid_Light_Actuator = 0.02*Core_mid_Area/0.09290304, ELSE, SET Core_mid_Light_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Core_mid_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Core_mid_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Core_top_LSr, !- Name Core_top, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Core_top_Occ_Sensor, !- Name Core_top, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Core_top_Area, !- Name Core_top, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Core_top_Light_Actuator, !- Name Core_top_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Core_top_Light_EMS_Program, !- Name SET Core_top_LSr_IP =0.093*Core_top_LSr/Core_top_Area, ! Calculate the actual LPD for each hour IF (Core_top_Occ_Sensor <= 0) && (Core_top_LSr_IP >= 0.02), SET Core_top_Light_Actuator = 0.02*Core_top_Area/0.09290304, ELSE, SET Core_top_Light_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Core_top_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Core_top_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Perimeter_top_ZN_3_LSr, !- Name Perimeter_top_ZN_3, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Perimeter_top_ZN_3_Occ_Sensor, !- Name Perimeter_top_ZN_3, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Perimeter_top_ZN_3_Area, !- Name Perimeter_top_ZN_3, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Perimeter_top_ZN_3_Light_Actuator, !- Name Perimeter_top_ZN_3_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Perimeter_top_ZN_3_Light_EMS_Program, !- Name SET Perimeter_top_ZN_3_LSr_IP =0.093*Perimeter_top_ZN_3_LSr/Perimeter_top_ZN_3_Area, ! Calculate the actual LPD for each hour IF (Perimeter_top_ZN_3_Occ_Sensor <= 0) && (Perimeter_top_ZN_3_LSr_IP >= 0.02), SET Perimeter_top_ZN_3_Light_Actuator = 0.02*Perimeter_top_ZN_3_Area/0.09290304, ELSE, SET Perimeter_top_ZN_3_Light_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Perimeter_top_ZN_3_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Perimeter_top_ZN_3_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Perimeter_top_ZN_2_LSr, !- Name Perimeter_top_ZN_2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Perimeter_top_ZN_2_Occ_Sensor, !- Name Perimeter_top_ZN_2, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Perimeter_top_ZN_2_Area, !- Name Perimeter_top_ZN_2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Perimeter_top_ZN_2_Light_Actuator, !- Name Perimeter_top_ZN_2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Perimeter_top_ZN_2_Light_EMS_Program, !- Name SET Perimeter_top_ZN_2_LSr_IP =0.093*Perimeter_top_ZN_2_LSr/Perimeter_top_ZN_2_Area, ! Calculate the actual LPD for each hour IF (Perimeter_top_ZN_2_Occ_Sensor <= 0) && (Perimeter_top_ZN_2_LSr_IP >= 0.02), SET Perimeter_top_ZN_2_Light_Actuator = 0.02*Perimeter_top_ZN_2_Area/0.09290304, ELSE, SET Perimeter_top_ZN_2_Light_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Perimeter_top_ZN_2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Perimeter_top_ZN_2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Perimeter_top_ZN_1_LSr, !- Name Perimeter_top_ZN_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Perimeter_top_ZN_1_Occ_Sensor, !- Name Perimeter_top_ZN_1, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Perimeter_top_ZN_1_Area, !- Name Perimeter_top_ZN_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Perimeter_top_ZN_1_Light_Actuator, !- Name Perimeter_top_ZN_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Perimeter_top_ZN_1_Light_EMS_Program, !- Name SET Perimeter_top_ZN_1_LSr_IP =0.093*Perimeter_top_ZN_1_LSr/Perimeter_top_ZN_1_Area, ! Calculate the actual LPD for each hour IF (Perimeter_top_ZN_1_Occ_Sensor <= 0) && (Perimeter_top_ZN_1_LSr_IP >= 0.02), SET Perimeter_top_ZN_1_Light_Actuator = 0.02*Perimeter_top_ZN_1_Area/0.09290304, ELSE, SET Perimeter_top_ZN_1_Light_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Perimeter_top_ZN_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Perimeter_top_ZN_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Perimeter_top_ZN_4_LSr, !- Name Perimeter_top_ZN_4, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Perimeter_top_ZN_4_Occ_Sensor, !- Name Perimeter_top_ZN_4, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Perimeter_top_ZN_4_Area, !- Name Perimeter_top_ZN_4, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Perimeter_top_ZN_4_Light_Actuator, !- Name Perimeter_top_ZN_4_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Perimeter_top_ZN_4_Light_EMS_Program, !- Name SET Perimeter_top_ZN_4_LSr_IP =0.093*Perimeter_top_ZN_4_LSr/Perimeter_top_ZN_4_Area, ! Calculate the actual LPD for each hour IF (Perimeter_top_ZN_4_Occ_Sensor <= 0) && (Perimeter_top_ZN_4_LSr_IP >= 0.02), SET Perimeter_top_ZN_4_Light_Actuator = 0.02*Perimeter_top_ZN_4_Area/0.09290304, ELSE, SET Perimeter_top_ZN_4_Light_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Perimeter_top_ZN_4_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Perimeter_top_ZN_4_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Perimeter_bot_ZN_3_LSr, !- Name Perimeter_bot_ZN_3, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Perimeter_bot_ZN_3_Occ_Sensor, !- Name Perimeter_bot_ZN_3, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Perimeter_bot_ZN_3_Area, !- Name Perimeter_bot_ZN_3, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Perimeter_bot_ZN_3_Light_Actuator, !- Name Perimeter_bot_ZN_3_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Perimeter_bot_ZN_3_Light_EMS_Program, !- Name SET Perimeter_bot_ZN_3_LSr_IP =0.093*Perimeter_bot_ZN_3_LSr/Perimeter_bot_ZN_3_Area, ! Calculate the actual LPD for each hour IF (Perimeter_bot_ZN_3_Occ_Sensor <= 0) && (Perimeter_bot_ZN_3_LSr_IP >= 0.02), SET Perimeter_bot_ZN_3_Light_Actuator = 0.02*Perimeter_bot_ZN_3_Area/0.09290304, ELSE, SET Perimeter_bot_ZN_3_Light_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Perimeter_bot_ZN_3_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Perimeter_bot_ZN_3_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Perimeter_bot_ZN_2_LSr, !- Name Perimeter_bot_ZN_2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Perimeter_bot_ZN_2_Occ_Sensor, !- Name Perimeter_bot_ZN_2, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Perimeter_bot_ZN_2_Area, !- Name Perimeter_bot_ZN_2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Perimeter_bot_ZN_2_Light_Actuator, !- Name Perimeter_bot_ZN_2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Perimeter_bot_ZN_2_Light_EMS_Program, !- Name SET Perimeter_bot_ZN_2_LSr_IP =0.093*Perimeter_bot_ZN_2_LSr/Perimeter_bot_ZN_2_Area, ! Calculate the actual LPD for each hour IF (Perimeter_bot_ZN_2_Occ_Sensor <= 0) && (Perimeter_bot_ZN_2_LSr_IP >= 0.02), SET Perimeter_bot_ZN_2_Light_Actuator = 0.02*Perimeter_bot_ZN_2_Area/0.09290304, ELSE, SET Perimeter_bot_ZN_2_Light_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Perimeter_bot_ZN_2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Perimeter_bot_ZN_2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Perimeter_bot_ZN_1_LSr, !- Name Perimeter_bot_ZN_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Perimeter_bot_ZN_1_Occ_Sensor, !- Name Perimeter_bot_ZN_1, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Perimeter_bot_ZN_1_Area, !- Name Perimeter_bot_ZN_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Perimeter_bot_ZN_1_Light_Actuator, !- Name Perimeter_bot_ZN_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Perimeter_bot_ZN_1_Light_EMS_Program, !- Name SET Perimeter_bot_ZN_1_LSr_IP =0.093*Perimeter_bot_ZN_1_LSr/Perimeter_bot_ZN_1_Area, ! Calculate the actual LPD for each hour IF (Perimeter_bot_ZN_1_Occ_Sensor <= 0) && (Perimeter_bot_ZN_1_LSr_IP >= 0.02), SET Perimeter_bot_ZN_1_Light_Actuator = 0.02*Perimeter_bot_ZN_1_Area/0.09290304, ELSE, SET Perimeter_bot_ZN_1_Light_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Perimeter_bot_ZN_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Perimeter_bot_ZN_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Perimeter_bot_ZN_4_LSr, !- Name Perimeter_bot_ZN_4, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Perimeter_bot_ZN_4_Occ_Sensor, !- Name Perimeter_bot_ZN_4, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Perimeter_bot_ZN_4_Area, !- Name Perimeter_bot_ZN_4, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Perimeter_bot_ZN_4_Light_Actuator, !- Name Perimeter_bot_ZN_4_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Perimeter_bot_ZN_4_Light_EMS_Program, !- Name SET Perimeter_bot_ZN_4_LSr_IP =0.093*Perimeter_bot_ZN_4_LSr/Perimeter_bot_ZN_4_Area, ! Calculate the actual LPD for each hour IF (Perimeter_bot_ZN_4_Occ_Sensor <= 0) && (Perimeter_bot_ZN_4_LSr_IP >= 0.02), SET Perimeter_bot_ZN_4_Light_Actuator = 0.02*Perimeter_bot_ZN_4_Area/0.09290304, ELSE, SET Perimeter_bot_ZN_4_Light_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Perimeter_bot_ZN_4_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Perimeter_bot_ZN_4_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Perimeter_mid_ZN_3_LSr, !- Name Perimeter_mid_ZN_3, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Perimeter_mid_ZN_3_Occ_Sensor, !- Name Perimeter_mid_ZN_3, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Perimeter_mid_ZN_3_Area, !- Name Perimeter_mid_ZN_3, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Perimeter_mid_ZN_3_Light_Actuator, !- Name Perimeter_mid_ZN_3_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Perimeter_mid_ZN_3_Light_EMS_Program, !- Name SET Perimeter_mid_ZN_3_LSr_IP =0.093*Perimeter_mid_ZN_3_LSr/Perimeter_mid_ZN_3_Area, ! Calculate the actual LPD for each hour IF (Perimeter_mid_ZN_3_Occ_Sensor <= 0) && (Perimeter_mid_ZN_3_LSr_IP >= 0.02), SET Perimeter_mid_ZN_3_Light_Actuator = 0.02*Perimeter_mid_ZN_3_Area/0.09290304, ELSE, SET Perimeter_mid_ZN_3_Light_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Perimeter_mid_ZN_3_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Perimeter_mid_ZN_3_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Perimeter_mid_ZN_2_LSr, !- Name Perimeter_mid_ZN_2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Perimeter_mid_ZN_2_Occ_Sensor, !- Name Perimeter_mid_ZN_2, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Perimeter_mid_ZN_2_Area, !- Name Perimeter_mid_ZN_2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Perimeter_mid_ZN_2_Light_Actuator, !- Name Perimeter_mid_ZN_2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Perimeter_mid_ZN_2_Light_EMS_Program, !- Name SET Perimeter_mid_ZN_2_LSr_IP =0.093*Perimeter_mid_ZN_2_LSr/Perimeter_mid_ZN_2_Area, ! Calculate the actual LPD for each hour IF (Perimeter_mid_ZN_2_Occ_Sensor <= 0) && (Perimeter_mid_ZN_2_LSr_IP >= 0.02), IF (DaylightSavings==0) && ((Hour < 7) || (Hour > 16)), !- Hour check is to avoid conflict with Add. G SET Perimeter_mid_ZN_2_Light_Actuator = 0.02*Perimeter_mid_ZN_2_Area/0.09290304, ELSEIF (DaylightSavings==1) && ((Hour < 6) || (Hour > 15)), !- Hour check is to avoid conflict with Add. G 1 SET Perimeter_mid_ZN_2_Light_Actuator = 0.02*Perimeter_mid_ZN_2_Area/0.09290304, ELSE, SET Perimeter_mid_ZN_2_Light_Actuator = NULL, ENDIF, ELSE, SET Perimeter_mid_ZN_2_Light_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Perimeter_mid_ZN_2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Perimeter_mid_ZN_2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Perimeter_mid_ZN_1_LSr, !- Name Perimeter_mid_ZN_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Perimeter_mid_ZN_1_Occ_Sensor, !- Name Perimeter_mid_ZN_1, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Perimeter_mid_ZN_1_Area, !- Name Perimeter_mid_ZN_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Perimeter_mid_ZN_1_Light_Actuator, !- Name Perimeter_mid_ZN_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Perimeter_mid_ZN_1_Light_EMS_Program, !- Name SET Perimeter_mid_ZN_1_LSr_IP =0.093*Perimeter_mid_ZN_1_LSr/Perimeter_mid_ZN_1_Area, ! Calculate the actual LPD for each hour IF (Perimeter_mid_ZN_1_Occ_Sensor <= 0) && (Perimeter_mid_ZN_1_LSr_IP >= 0.02), SET Perimeter_mid_ZN_1_Light_Actuator = 0.02*Perimeter_mid_ZN_1_Area/0.09290304, ELSE, SET Perimeter_mid_ZN_1_Light_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Perimeter_mid_ZN_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Perimeter_mid_ZN_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Perimeter_mid_ZN_4_LSr, !- Name Perimeter_mid_ZN_4, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Perimeter_mid_ZN_4_Occ_Sensor, !- Name Perimeter_mid_ZN_4, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Perimeter_mid_ZN_4_Area, !- Name Perimeter_mid_ZN_4, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Perimeter_mid_ZN_4_Light_Actuator, !- Name Perimeter_mid_ZN_4_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Perimeter_mid_ZN_4_Light_EMS_Program, !- Name SET Perimeter_mid_ZN_4_LSr_IP =0.093*Perimeter_mid_ZN_4_LSr/Perimeter_mid_ZN_4_Area, ! Calculate the actual LPD for each hour IF (Perimeter_mid_ZN_4_Occ_Sensor <= 0) && (Perimeter_mid_ZN_4_LSr_IP >= 0.02), SET Perimeter_mid_ZN_4_Light_Actuator = 0.02*Perimeter_mid_ZN_4_Area/0.09290304, ELSE, SET Perimeter_mid_ZN_4_Light_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Perimeter_mid_ZN_4_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Perimeter_mid_ZN_4_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, VAV_bot_OA_VRP, !- Name PACU_VAV_bot, !- Output:Variable or Output:Meter Index Key Name Air System Outdoor Air Mechanical Ventilation Requested Mass Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, VAV_bot_OA, !- Name PACU_VAV_bot, !- Output:Variable or Output:Meter Index Key Name Air System Outdoor Air Mass Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, VAV_bot_SUPPLY_FLOW, !- Name PACU_VAV_bot_OA-PACU_VAV_bot_CoolCNode, !- Output:Variable or Output:Meter Index Key Name System Node Standard Density Volume Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Actuator, VAV_bot_MAX_OA_FRAC, !- Name VAV_bot Max OA Fraction, !- Actuated Component Unique Name Schedule:Constant, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:ProgramCallingManager, VAV_bot_MAX_OA_FRAC_Prog_Manager,!- Name InsideHVACSystemIterationLoop, !- EnergyPlus Model Calling Point VAV_bot_MAX_OA_FRAC; !- Program Name 1 EnergyManagementSystem:Program, VAV_bot_MAX_OA_FRAC, !- Name IF VAV_bot_OA > VAV_bot_OA_VRP, !- Program Line 1 SET VAV_bot_MAX_OA_FRAC = NULL, !- Program Line 2 ELSE, !- A4 IF VAV_bot_SUPPLY_FLOW > 0, !- A5 SET VAV_bot_MAX_OA_FRAC = 0.9561 / VAV_bot_SUPPLY_FLOW,!- A6 ELSE, !- A7 SET VAV_bot_MAX_OA_FRAC = NULL, !- A8 ENDIF, !- A9 ENDIF; !- A10 EnergyManagementSystem:Sensor, VAV_mid_OA_VRP, !- Name PACU_VAV_mid, !- Output:Variable or Output:Meter Index Key Name Air System Outdoor Air Mechanical Ventilation Requested Mass Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, VAV_mid_OA, !- Name PACU_VAV_mid, !- Output:Variable or Output:Meter Index Key Name Air System Outdoor Air Mass Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, VAV_mid_SUPPLY_FLOW, !- Name PACU_VAV_mid_OA-PACU_VAV_mid_CoolCNode, !- Output:Variable or Output:Meter Index Key Name System Node Standard Density Volume Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Actuator, VAV_mid_MAX_OA_FRAC, !- Name VAV_mid Max OA Fraction, !- Actuated Component Unique Name Schedule:Constant, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:ProgramCallingManager, VAV_mid_MAX_OA_FRAC_Prog_Manager,!- Name InsideHVACSystemIterationLoop, !- EnergyPlus Model Calling Point VAV_mid_MAX_OA_FRAC; !- Program Name 1 EnergyManagementSystem:Program, VAV_mid_MAX_OA_FRAC, !- Name IF VAV_mid_OA > VAV_mid_OA_VRP, !- Program Line 1 SET VAV_mid_MAX_OA_FRAC = NULL, !- Program Line 2 ELSE, !- A4 IF VAV_mid_SUPPLY_FLOW > 0, !- A5 SET VAV_mid_MAX_OA_FRAC = 0.9561 / VAV_mid_SUPPLY_FLOW,!- A6 ELSE, !- A7 SET VAV_mid_MAX_OA_FRAC = NULL, !- A8 ENDIF, !- A9 ENDIF; !- A10 EnergyManagementSystem:Sensor, VAV_top_OA_VRP, !- Name PACU_VAV_top, !- Output:Variable or Output:Meter Index Key Name Air System Outdoor Air Mechanical Ventilation Requested Mass Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, VAV_top_OA, !- Name PACU_VAV_top, !- Output:Variable or Output:Meter Index Key Name Air System Outdoor Air Mass Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, VAV_top_SUPPLY_FLOW, !- Name PACU_VAV_top_OA-PACU_VAV_top_CoolCNode, !- Output:Variable or Output:Meter Index Key Name System Node Standard Density Volume Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Actuator, VAV_top_MAX_OA_FRAC, !- Name VAV_top Max OA Fraction, !- Actuated Component Unique Name Schedule:Constant, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:ProgramCallingManager, VAV_top_MAX_OA_FRAC_Prog_Manager,!- Name InsideHVACSystemIterationLoop, !- EnergyPlus Model Calling Point VAV_top_MAX_OA_FRAC; !- Program Name 1 EnergyManagementSystem:Program, VAV_top_MAX_OA_FRAC, !- Name IF VAV_top_OA > VAV_top_OA_VRP, !- Program Line 1 SET VAV_top_MAX_OA_FRAC = NULL, !- Program Line 2 ELSE, !- A4 IF VAV_top_SUPPLY_FLOW > 0, !- A5 SET VAV_top_MAX_OA_FRAC = 0.9561 / VAV_top_SUPPLY_FLOW,!- A6 ELSE, !- A7 SET VAV_top_MAX_OA_FRAC = NULL, !- A8 ENDIF, !- A9 ENDIF; !- A10