!The DOE Prototype Building Models were developed by Pacific Northwest National Laboratory (PNNL), under contract with the U.S. !Department of Energy (DOE). These building models were derived from DOE's Commercial Reference Building Models with modifications !based on input from the ASHRAE Standard 90.1 committee, the Advanced Energy Design Guide series, and building industry experts. The !prototypes models were developed to quantify energy saving impacts from newly published editions of ASHRAE Standard 90.1, 189.1, IECC, !and other energy codes and standards. The basic building descriptions can be found in the Scorecards posted at www.energycodes.gov !website. The recommended citation of the prototype models is ! !DOE and PNNL. 2020. Commercial Prototype Building Models, Richland, WA, Pacific Northwest National Laboratory. Available at https://www.energycodes.gov/development/commercial/prototype_models. ! !Detailed descriptions of the prototype model development and addenda modeling strategies can be found in the following reports: !DOE, 2020. Preliminary Energy Savings Analysis: ANSI/ASHRAE/IES Standard 90.1-2019. Report prepared by Zhang, J., M. Rosenberg, J. !Lerond, Y. Xie, Nambia, C., Y. Chen, R. Hart, M. Halverson, D. Maddox, and S. Goel, Richland, WA, Pacific Northwest National Laboratory. ! !Zhang, J., Y. Chen, Y. Xie, M. Rosenberg, R. Hart. Energy and Energy Cost Savings Analysis of the 2018 IECC for Commercial Buildings. !2018. PNNL-28125. Richland, WA: Pacific Northwest National Laboratory. ! !DOE. 2017. Energy Savings Analysis: ANSI/ASHRAE/IES Standard 90.1-2016. Prepared by Athalye, R.A, M.A. Halverson, M.I. Rosenberg, B. Liu, !J. Zhang, R. Hart, V.V. Mendon, S. Goel, Y. Chen, Y. Xie, and M. Zhao, Richland, WA, Pacific Northwest National Laboratory. https://www.energycodes.gov/sites/default/files/documents/02202018_Standard_90.1-2016_Determination_TSD.pdf. ! !Zhang, J., Y. Xie, R.A. Athalye, J. Zhuge, M. Rosenberg, R. Hart, and B. Liu. Energy and Energy Cost Savings Analysis of the 2015 IECC !for Commercial Buildings. 2015. PNNL-24269 Rev. 1. Richland, WA: Pacific Northwest National !Laboratory. https://www.energycodes.gov/sites/default/files/documents/2015_IECC_Commercial_Analysis.pdf. ! !Halverson M.A., M.I. Rosenberg, W. Wang, J. Zhang, V.V. Mendon, R.A. Athalye, Y. Xie, R. Hart, S. Goel, 2014. ANSI/ASHRAE/IES Standard !90.1-2013 Determination of Energy Savings: Quantitative Analysis, PNNL-23479. Richland, WA: Pacific Northwest National Laboratory. https://www.energycodes.gov/sites/default/files/documents/901-2013_finalCommercialDeterminationQuantitativeAnalysis_TSD_0.pdf. ! !Goel S., R.A. Athalye, W. Wang, J. Zhang, M.I. Rosenberg, Y. Xie, and R. Hart, et al. 2014. Enhancements to ASHRAE Standard 90.1 !Prototype Building Models. PNNL-23269. Richland, WA: Pacific Northwest National Laboratory. https://www.pnnl.gov/main/publications/external/technical_reports/PNNL-23269.pdf. ! !Zhang J., R.A. Athalye, R. Hart, M.I. Rosenberg, Y. Xie, S. Goel, and V.V. Mendon, et al. 2013. Energy and Energy Cost Savings Analysis !of the IECC for Commercial Buildings. PNNL-22760. Richland, WA: Pacific Northwest National Laboratory. http://www.pnnl.gov/main/publications/external/technical_reports/PNNL-22760.pdf. ! !Thornton B.A., M.I. Rosenberg, E.E. Richman, W. Wang, Y. Xie, J. Zhang, H. Cho, VV Mendon, R.A. Athalye, and B. Liu. 2011. Achieving !the 30% Goal: Energy and Cost Savings Analysis of ASHRAE Standard 90.1-2010. PNNL-20405. Richland, WA: Pacific Northwest National !Laboratory. https://www.energycodes.gov/sites/default/files/documents/BECP_Energy_Cost_Savings_STD2010_May2011_v00.pdf. ! ! ! WeatherFile: USA_MN_Rochester.Intl.AP.726440_TMY3.epw ! BEGIN ECONOMIZER MAP ! Economizer Name, DX COIL Name ! PSZ-AC_1:1_OA_Controller, PSZ-AC_1:1_Unitary_Package_CoolCoil ! PSZ-AC_2:2_OA_Controller, PSZ-AC_2:2_Unitary_Package_CoolCoil ! PSZ-AC_3:3_OA_Controller, PSZ-AC_3:3_Unitary_Package_CoolCoil ! PSZ-AC_4:4_OA_Controller, PSZ-AC_4:4_Unitary_Package_CoolCoil ! PSZ-AC_5:5_OA_Controller, PSZ-AC_5:5_Unitary_Package_CoolCoil ! PSZ-AC_6:6_OA_Controller, PSZ-AC_6:6_Unitary_Package_CoolCoil ! PSZ-AC_7:7_OA_Controller, PSZ-AC_7:7_Unitary_Package_CoolCoil ! PSZ-AC_8:8_OA_Controller, PSZ-AC_8:8_Unitary_Package_CoolCoil ! PSZ-AC_9:9_OA_Controller, PSZ-AC_9:9_Unitary_Package_CoolCoil ! PSZ-AC_10:10_OA_Controller, PSZ-AC_10:10_Unitary_Package_CoolCoil ! END ECONOMIZER MAP ! ! ! BEGIN EMS PROGRAM MAP ! EMS PROGRAM, DX COIL Name ! PSZ-AC_1:1, PSZ-AC_1:1_UNITARY_PACKAGE_COOLCOIL ! PSZ-AC_2:2, PSZ-AC_2:2_UNITARY_PACKAGE_COOLCOIL ! PSZ-AC_3:3, PSZ-AC_3:3_UNITARY_PACKAGE_COOLCOIL ! PSZ-AC_4:4, PSZ-AC_4:4_UNITARY_PACKAGE_COOLCOIL ! PSZ-AC_5:5, PSZ-AC_5:5_UNITARY_PACKAGE_COOLCOIL ! PSZ-AC_6:6, PSZ-AC_6:6_UNITARY_PACKAGE_COOLCOIL ! PSZ-AC_7:7, PSZ-AC_7:7_UNITARY_PACKAGE_COOLCOIL ! PSZ-AC_8:8, PSZ-AC_8:8_UNITARY_PACKAGE_COOLCOIL ! PSZ-AC_9:9, PSZ-AC_9:9_UNITARY_PACKAGE_COOLCOIL ! PSZ-AC_10:10, PSZ-AC_10:10_UNITARY_PACKAGE_COOLCOIL ! END EMS PROGRAM MAP ! GPARM parameters as input: ! Case = ASHRAE901_RetailStripmall_STD2019_Rochester ! SelectedCase = ! ground_tempt = National_RetailStripmall_ASHRAE901_STD2016_Zone6A_nonres_MN-Rochester-MN.gtp ! avg_oa_tempt_ip = 43.475 ! maxdiff_oa_tempt_ip = 60.3 ! ext_wall_type = SteelFramedWall ! nonres_ext_wall_ufactor = 0.278234887 ! roof_type = LightweightRoof ! nonres_roof_ufactor = 0.181704416 ! nonres_window = ! roof_emissivity = 0.9 ! roof_solar_absorp = 0.77 ! LPD_Type1 = 9.584185835 ! LPD_Type2 = 5.694108611 ! LPD_Type3 = 8.568072692 ! LPD_type1_allowance = 4.006655691 ! LPD_type2_allowance = 1.853873608 ! LPD_type3_allowance = 0.239287045 ! exterior_lights_watts = 0 ! exterior_lights_watts_a = 418.4 ! exterior_lights_watts_b = 2520.304746 ! economizer = DifferentialDryBulb ! skip_economizer_control = No ! cc_sa_humidity = 0.0085 ! damper_sch_type1 = Type1_MinOA_MotorizedDamper_SCH ! damper_sch_type2 = Type2_MinOA_MotorizedDamper_SCH ! damper_sch_type3 = Type3_MinOA_MotorizedDamper_SCH ! LGstore1_SZ_VAV = No ! avg_oa_tempt = 6.375 ! maxdiff_oa_tempt = 33.5 ! infil = 0.00056896 ! OA_Type1 = 0.001181026 ! OA_Type2 = 0.001181026 ! OA_Type3 = 0.001181026 ! door_infil1 = 0.241164917 ! door_infil2 = 0.134504895 ! frac_ofpk = 0.131 ! economizer_lockout = LockoutWithHeating ! TYPE1_EQUIP_SCH = TYPE1_EQUIP_SCH_ADV ! TYPE2_EQUIP_SCH = TYPE2_EQUIP_SCH_ADV ! TYPE3_EQUIP_SCH = TYPE3_EQUIP_SCH_ADV ! addendum_cd = 2016AS ! pv_generator = no ! pv_surface_area = 0 ! STD189_overhang = no ! swh_et = 1 ! swh_ua = 1.205980747 ! ext_lgt_sch = Exterior_Lgt_ALWAYS_ON ! PSZ_AC_1_1_ERV = No ! PSZ_AC_6_6_ERV = No ! SZ_VAV_189_LGstore2 = no ! LTG_SCH_SET = LTG_SET_STD2013 ! PSZ_AC_1_1_ERV_power = 345.215375 ! PSZ_AC_6_6_ERV_power = 345.215375 ! Type1_HtgSetP_Sch = Type1_HTGSETP_SCH_NO_OPTIMUM ! Type1_ClgSetP_Sch = Type1_CLGSETP_SCH_NO_OPTIMUM ! Type2_HtgSetP_Sch = Type2_HTGSETP_SCH_NO_OPTIMUM ! Type2_ClgSetP_Sch = Type2_CLGSETP_SCH_NO_OPTIMUM ! Type3_HtgSetP_Sch = Type3_HTGSETP_SCH_NO_OPTIMUM ! Type3_ClgSetP_Sch = Type3_CLGSETP_SCH_NO_OPTIMUM ! pipe_heat_loss = 173 ! skip_EMSprogram = no ! Wfile_TMY3 = USA_MN_Rochester.Intl.AP.726440_TMY3.epw ! loadProfile = No ! receptacle_ctrl_occ_reduction_frac = 0.9962875 ! receptacle_ctrl_unocc_reduction_frac = 0.983125 ! CodeName = ASHRAE90.1_STD2019 ! CZ_City_Old = Burlington ! CZ_Label = 6A ! exterior_lights_watts_c = 2520.304746 ! Addendum_AH = Yes ! LPD_Ctrl = 0.02 ! con_swingdoor_r = 0.475963827 ! base_lpd = 9.584185835 ! display_lpd_type3_lgstore = 5.694108611 ! display_lpd_type3_smstore = 8.568072692 ! display_lpd_type2_smstore = 6.953486129 ! display_lpd_type1_smstore = 0 ! display_lpd_type1_smstore.1 = 0 ! nonres_window_u_factor = 0.34 ! nonres_window_shgc = 0.38 ! nonresLSG = 1.1 ! AnalysisPurpose = ProgressIndicator ! AnalysisCodeName = ASHRAE901 ! AnalysisCodeYear = 2019 ! AnalysisAmendment = NoneAmend ! AnalysisPrototype = RetailStripmall ! AnalysisScope = National ! AnalysisState = National ! AnalysisClimateZone = 6A ! AnalysisCity = USA_MN_Rochester ! var_Ffactor_IP = 0.51 ! var_Cfactor_IP = 0.092 ! Water_Heater_flow = 1.89e-06 ! VT_Elec_Wheater = No ! specify overhang_pf for 1891 codes Version,9.0; Timestep,6; SimulationControl, Yes, !- Do Zone Sizing Calculation Yes, !- Do System Sizing Calculation Yes, !- Do Plant Sizing Calculation No, !- Run Simulation for Sizing Periods YES; !- Run Simulation for Weather File Run Periods RunPeriod, , !- Name 1, !- Begin Month 1, !- Begin Day of Month , !- Begin Year 12, !- End Month 31, !- End Day of Month , !- End Year Sunday, !- Day of Week for Start Day No, !- Use Weather File Holidays and Special Days No, !- Use Weather File Daylight Saving Period No, !- Apply Weekend Holiday Rule Yes, !- Use Weather File Rain Indicators Yes; !- Use Weather File Snow Indicators SurfaceConvectionAlgorithm:Inside,TARP; SurfaceConvectionAlgorithm:Outside,TARP; HeatBalanceAlgorithm,ConductionTransferFunction,200.0000; Sizing:Parameters, 1.2000, !- Heating Sizing Factor 1.2000, !- Cooling Sizing Factor 6; !- Timesteps in Averaging Window ConvergenceLimits, 1, !- Minimum System Timestep {minutes} 20; !- Maximum HVAC Iterations ShadowCalculation, AverageOverDaysInFrequency, !- Calculation Method 30, !- Calculation Frequency 15000; !- Maximum Figures in Shadow Overlap Calculations GlobalGeometryRules, UpperLeftCorner, !- Starting Vertex Position Counterclockwise, !- Vertex Entry Direction Relative, !- Coordinate System Relative; !- Daylighting Reference Point Coordinate System Building, RetailStripmall, !- Name 0.0000, !- North Axis {deg} City, !- Terrain 0.0400, !- Loads Convergence Tolerance Value 0.2000, !- Temperature Convergence Tolerance Value {deltaC} FullInteriorAndExterior, !- Solar Distribution 25, !- Maximum Number of Warmup Days 6; !- Minimum Number of Warmup Days RunPeriodControl:SpecialDays, New Years Day, !- Name January 1, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Veterans Day, !- Name November 11, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Christmas, !- Name December 25, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Independence Day, !- Name July 4, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, MLK Day, !- Name 3rd Monday in January, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Presidents Day, !- Name 3rd Monday in February, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Memorial Day, !- Name Last Monday in May, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Labor Day, !- Name 1st Monday in September, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Columbus Day, !- Name 2nd Monday in October, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Thanksgiving, !- Name 4th Thursday in November,!- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:DaylightSavingTime, 2nd Sunday in March, !- Start Date 1st Sunday in November; !- End Date !- =========== ALL OBJECTS IN CLASS: LOCATION =========== ! Site:Location and design-day objects created by: ! ../../_p.bin/ddy2idf /projects/bigsim/weather/EnergyPlus/tmy3.new/all/USA_MN_Rochester.Intl.AP.726440_TMY3.ddy ! Site:Location, Rochester International Arpt_MN_USA Design_Conditions, !- Site:Location Name 43.90, !- Latitude {N+ S-} -92.50, !- Longitude {W- E+} -6.00, !- Time Zone Relative to GMT {GMT+/-} 398.00; !- Elevation {m} SizingPeriod:DesignDay, Rochester International Arpt Ann Htg 99.6% Condns DB, !- Name 1, !- Month 21, !- Day of Month WinterDesignDay,!- Day Type -26.2, !- Maximum Dry-Bulb Temperature {C} 0.0, !- Daily Dry-Bulb Temperature Range {C} DefaultMultipliers, !- Dry-Bulb Temperature Range Modifier Type , !- Dry-Bulb Temperature Range Modifier Schedule Name Wetbulb, !- Humidity Condition Type -26.2, !- Wetbulb at Maximum Dry-Bulb {C} , !- Humidity Indicating Day Schedule Name , !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir} , !- Enthalpy at Maximum Dry-Bulb {J/kg} , !- Daily WetBulb Temperature Range {deltaC} 96634., !- Barometric Pressure {Pa} 5.7, !- Wind Speed {m/s} design conditions vs. traditional 6.71 m/s (15 mph) 310, !- Wind Direction {Degrees; N=0, S=180} No, !- Rain {Yes/No} No, !- Snow on ground {Yes/No} No, !- Daylight Savings Time Indicator ASHRAEClearSky, !- Solar Model Indicator , !- Beam Solar Day Schedule Name , !- Diffuse Solar Day Schedule Name , !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) , !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) 0.00; !- Clearness {0.0 to 1.1} SizingPeriod:DesignDay, Rochester International Arpt Ann Clg .4% Condns DB=>MWB, !- Name 7, !- Month 21, !- Day of Month SummerDesignDay,!- Day Type 31.2, !- Maximum Dry-Bulb Temperature {C} 10.6, !- Daily Dry-Bulb Temperature Range {C} DefaultMultipliers, !- Dry-Bulb Temperature Range Modifier Type , !- Dry-Bulb Temperature Range Modifier Schedule Name Wetbulb, !- Humidity Condition Type 23.1, !- Wetbulb at Maximum Dry-Bulb {C} , !- Humidity Indicating Day Schedule Name , !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir} , !- Enthalpy at Maximum Dry-Bulb {J/kg} , !- Daily WetBulb Temperature Range {deltaC} 96634., !- Barometric Pressure {Pa} 6.7, !- Wind Speed {m/s} design conditions vs. traditional 3.35 m/s (7mph) 200, !- Wind Direction {Degrees; N=0, S=180} No, !- Rain {Yes/No} No, !- Snow on ground {Yes/No} No, !- Daylight Savings Time Indicator ASHRAETau, !- Solar Model Indicator , !- Beam Solar Day Schedule Name , !- Diffuse Solar Day Schedule Name 0.404, !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) 2.226; !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) !- =========== ALL OBJECTS IN CLASS: SITE:WATERMAINSTEMPERATURE =========== Site:WaterMainsTemperature, Correlation, !- Calculation Method , !- Temperature Schedule Name 6.375, !- Annual average outdoor air temperature {C} 33.5; !- Maximum difference in monthly average outdoor air temperatures {C} !- =========== ALL OBJECTS IN CLASS: Site:GroundTemperature:FCfactorMethod =========== Site:GroundTemperature:FCfactorMethod, 7.4, !- January Ground Temperature {C} -0.0, !- February Ground Temperature {C} -7.6, !- March Ground Temperature {C} -12.6, !- April Ground Temperature {C} -7.7, !- May Ground Temperature {C} 0.3, !- June Ground Temperature {C} 7.0, !- July Ground Temperature {C} 14.2, !- August Ground Temperature {C} 19.2, !- September Ground Temperature {C} 20.9, !- October Ground Temperature {C} 20.0, !- November Ground Temperature {C} 15.4; !- December Ground Temperature {C} !- =========== ALL OBJECTS IN CLASS: MATERIAL:REGULAR-R =========== Material:NoMass, Opaque Door panel_con, !- Name MediumRough, !- Roughness 0.475963827, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance !- =========== ALL OBJECTS IN CLASS: CONSTRUCTION =========== Construction, Swinging Door_con, !- Name Opaque Door panel_con; !- Outside Layer ! !- =========== ALL OBJECTS IN CLASS: MATERIAL:REGULAR =========== Material, Std Wood 6inch, !- Name MediumSmooth, !- Roughness 0.15, !- Thickness {m} 0.12, !- Conductivity {W/m-K} 540.0000, !- Density {kg/m3} 1210, !- Specific Heat {J/kg-K} 0.9000000, !- Thermal Absorptance 0.7000000, !- Solar Absorptance 0.7000000; !- Visible Absorptance Material, AC02 Acoustic Ceiling, !- Name MediumSmooth, !- Roughness 1.2700000E-02, !- Thickness {m} 5.7000000E-02, !- Conductivity {W/m-K} 288.0000, !- Density {kg/m3} 1339.000, !- Specific Heat {J/kg-K} 0.9000000, !- Thermal Absorptance 0.7000000, !- Solar Absorptance 0.2000000; !- Visible Absorptance Material, F07 25mm stucco, !- Name Smooth, !- Roughness 0.0254, !- Thickness {m} 0.72, !- Conductivity {W/m-K} 1856, !- Density {kg/m3} 840, !- Specific Heat {J/kg-K} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material, F08 Metal surface, !- Name Smooth, !- Roughness 0.0008, !- Thickness {m} 45.28, !- Conductivity {W/m-K} 7824, !- Density {kg/m3} 500; !- Specific Heat {J/kg-K} Material, F08 Metal roof surface, !- Name Smooth, !- Roughness 0.0008, !- Thickness {m} 45.28, !- Conductivity {W/m-K} 7824, !- Density {kg/m3} 500, !- Specific Heat {J/kg-K} 0.9, !- Absorptance:Thermal 0.77; !- Absorptance:Solar Material, F12 Asphalt shingles, !- Name VeryRough, !- Roughness 0.0032, !- Thickness {m} 0.04, !- Conductivity {W/m-K} 1120, !- Density {kg/m3} 1260, !- Specific Heat {J/kg-K} 0.9, !- Absorptance:Thermal 0.77; !- Absorptance:Solar Material, F13 Built-up roofing, !- Name Rough, !- Roughness 0.0095, !- Thickness {m} 0.16, !- Conductivity {W/m-K} 1120, !- Density {kg/m3} 1460, !- Specific Heat {J/kg-K} 0.9, !- Absorptance:Thermal 0.77; !- Absorptance:Solar Material, G01 13mm gypsum board, !- Name Smooth, !- Roughness 0.0127, !- Thickness {m} 0.1600, !- Conductivity {W/m-K} 800.0000, !- Density {kg/m3} 1090.0000, !- Specific Heat {J/kg-K} 0.9000, !- Absorptance:Thermal 0.7000, !- Absorptance:Solar 0.5000; !- Absorptance:Visible Material, G01 16mm gypsum board, !- Name MediumSmooth, !- Roughness 0.0159, !- Thickness {m} 0.16, !- Conductivity {W/m-K} 800, !- Density {kg/m3} 1090; !- Specific Heat {J/kg-K} Material, G02 16mm plywood, !- Name Smooth, !- Roughness 0.0159, !- Thickness {m} 0.12, !- Conductivity {W/m-K} 544, !- Density {kg/m3} 1210; !- Specific Heat {J/kg-K} Material, M14 150mm heavyweight concrete roof, !- Name MediumRough, !- Roughness 0.1524, !- Thickness {m} 2.31, !- Conductivity {W/m-K} 2322, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, 100mm Normalweight concrete wall, !- Name - based on 90.1-2004 Appendix-Table A3-1B MediumRough, !- Roughness 0.1016, !- Thickness {m} 2.31, !- Conductivity {W/m-K} 2322, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, 200mm Normalweight concrete wall, !- Name - based on 90.1-2004 Appendix-Table A3-1B MediumRough, !- Roughness 0.2032, !- Thickness {m} 2.31, !- Conductivity {W/m-K} 2322, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, 100mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B MediumRough, !- Roughness 0.1016, !- Thickness {m} 2.31, !- Conductivity {W/m-K} 2322, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, 150mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B MediumRough, !- Roughness 0.1524, !- Thickness {m} 2.31, !- Conductivity {W/m-K} 2322, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, 200mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B MediumRough, !- Roughness 0.2032, !- Thickness {m} 2.31, !- Conductivity {W/m-K} 2322, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, M10 200mm concrete block wall, !- Name MediumRough, !- Roughness 0.2032, !- Thickness {m} 0.72, !- Conductivity {W/m-K} 800, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, M10 200mm concrete block basement wall, !- Name MediumRough, !- Roughness 0.2032, !- Thickness {m} 1.326, !- Conductivity {W/m-K} 1842, !- Density {kg/m3} 912; !- Specific Heat {J/kg-K} Material:NoMass, CP02 CARPET PAD, !- Name VeryRough, !- Roughness 0.21648, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.8; !- Visible Absorptance Material:NoMass, Air_Wall_Material, !- Name Rough, !- Roughness 0.2079491, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7; !- Solar Absorptance Material:NoMass, Nonres_Roof_Insulation, !- Name MediumSmooth, !- Roughness 5.30668495131472, !- Thermal Resistance {m2-K/W} 0.9, !- Absorptance:Thermal 0.7, !- Absorptance:Solar 0.7; !- Absorptance:Visible Material:NoMass, Res_Roof_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Semiheated_Roof_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Nonres_Exterior_Wall_Insulation, !- Name MediumSmooth, !- Roughness 3.21036415428069, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Res_Exterior_Wall_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Semiheated_Exterior_Wall_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Nonres_Floor_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Res_Floor_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Semiheated_Floor_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Std Opaque Door Panel, !- Name MediumRough, !- Roughness 0.123456790123457, !- (corresponds to default RSI-0.12327 or R-0.7) Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance !- =========== ALL OBJECTS IN CLASS: CONSTRUCTION =========== Construction, InteriorFurnishings, !- Name Std Wood 6inch; !- Outside Layer Construction, Air_Wall, !- Name Air_Wall_Material; !- Outside Layer Construction, DropCeiling, !- Name AC02 Acoustic Ceiling; !- Outside Layer Construction, OpaqueDoor, !- Name Std Opaque Door Panel; !- Outside Layer Construction, AtticRoofDeck, !- Name F12 Asphalt shingles, !- Outside Layer G02 16mm plywood; !- Layer 2 Construction, int_wall, !- Name G01 13mm gypsum board, !- Outside Layer G01 13mm gypsum board; !- Layer 2 Construction, ext_slab_8in_with_carpet,!- Name 200mm Normalweight concrete floor, !- Outside Layer CP02 CARPET PAD; !- Layer 2 Construction, ext_slab_8in, !- Name 200mm Normalweight concrete floor; !- Outside Layer Construction, ext_slab_6in_with_carpet,!- Name 150mm Normalweight concrete floor, !- Outside Layer CP02 CARPET PAD; !- Layer 2 Construction, ext_slab_6in, !- Name 150mm Normalweight concrete floor; !- Outside Layer Construction, int_slab_floor, !- Name 100mm Normalweight concrete floor, !- Outside Layer CP02 CARPET PAD; !- Layer 2 Construction, int_slab_ceiling, !- Name CP02 CARPET PAD, !- Outside Layer 100mm Normalweight concrete floor; !- Layer 2 Construction, basement_wall, !- Name M10 200mm concrete block basement wall; !- Outside Layer Construction, int_wood_floor, !- Name AC02 Acoustic Ceiling, !- Outside Layer G02 16mm plywood, !- Layer 2 CP02 CARPET PAD; !- Layer 3 Construction, ext_soffit_floor, !- Name G02 16mm plywood; !- Outside Layer Construction, nonres_roof, !- Name F13 Built-up roofing, !- Outside Layer Nonres_Roof_Insulation, !- Layer #2 F08 Metal surface; !- Layer #3 Construction, res_roof, !- Name F13 Built-up roofing, !- Outside Layer Res_Roof_Insulation, !- Layer #2 F08 Metal surface; !- Layer #3 Construction, semiheated_roof, !- Name F13 Built-up roofing, !- Outside Layer Semiheated_Roof_Insulation, !- Layer #2 F08 Metal surface; !- Layer #3 Construction, nonres_ext_wall, !- Name F07 25mm stucco, !- Outside Layer G01 16mm gypsum board, !- Layer #2 Nonres_Exterior_Wall_Insulation, !- Layer #3 G01 16mm gypsum board; !- Layer #4 Construction, res_ext_wall, !- Name F07 25mm stucco, !- Outside Layer G01 16mm gypsum board, !- Layer #1 Res_Exterior_Wall_Insulation, !- Layer #2 G01 16mm gypsum board; !- Layer #3 Construction, semiheated_ext_wall, !- Name F07 25mm stucco, !- Outside Layer G01 16mm gypsum board, !- Layer #1 Semiheated_Exterior_Wall_Insulation, !- Layer #2 G01 16mm gypsum board; !- Layer #3 Construction, nonres_floor, !- Name Nonres_Floor_Insulation, !- Outside Layer 100mm Normalweight concrete floor, !- Layer #1 CP02 CARPET PAD; !- Layer #2 Construction, res_floor, !- Name Res_Floor_Insulation, !- Outside Layer 100mm Normalweight concrete floor, !- Layer #1 CP02 CARPET PAD; !- Layer #2 Construction, semiheated_floor, !- Name Semiheated_Floor_Insulation, !- Outside Layer 100mm Normalweight concrete floor, !- Layer #1 CP02 CARPET PAD; !- Layer #2 Construction, nonres_floor_ceiling, !- Name - reverse ordered layers for nonres_floor CP02 CARPET PAD, !- Outside Layer 100mm Normalweight concrete floor, !- Layer #1 Nonres_Floor_Insulation; !- Layer #2 Construction, res_floor_ceiling, !- Name - reverse ordered layers for res_floor CP02 CARPET PAD, !- Outside Layer 100mm Normalweight concrete floor, !- Layer #1 Res_Floor_Insulation; !- Layer #2 Construction, semiheated_floor_ceiling, !- Name - reverse ordered layers for semiheated_floor CP02 CARPET PAD, !- Outside Layer 100mm Normalweight concrete floor, !- Layer #1 Semiheated_Floor_Insulation; !- Layer #2 !- =========== ALL OBJECTS IN CLASS: WINDOWMATERIAL:SIMPLEGLAZINGSYSTEM =========== WindowMaterial:SimpleGlazingSystem, Nonres Window Glazing Layer, !- Name 1.9306084, !- U-Factor {W/m2-K} 0.38, !- Solar Heat Gain Coefficient 0.418; !- Visible Transmittance Construction, NonresWindow_U_0.34_SHGC_0.38, !- Name Nonres Window Glazing Layer; !- Outside Layer !- =========== ALL OBJECTS IN CLASS: SCHEDULETYPELIMITS =========== ScheduleTypeLimits, Any Number; !- Name ScheduleTypeLimits, Fraction, !- Name 0.0, !- Lower Limit Value 1.0, !- Upper Limit Value CONTINUOUS; !- Numeric Type ScheduleTypeLimits, Temperature, !- Name -60, !- Lower Limit Value 200, !- Upper Limit Value CONTINUOUS; !- Numeric Type ScheduleTypeLimits, On/Off, !- Name 0, !- Lower Limit Value 1, !- Upper Limit Value DISCRETE; !- Numeric Type ScheduleTypeLimits, Control Type, !- Name 0, !- Lower Limit Value 4, !- Upper Limit Value DISCRETE; !- Numeric Type ScheduleTypeLimits, Humidity, !- Name 10, !- Lower Limit Value 90, !- Upper Limit Value CONTINUOUS; !- Numeric Type ScheduleTypeLimits, Number; !- Name Schedule:Compact, Type1_OCC_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Monday Tuesday Wednesday Thursday, !- Field 2 Until: 08:00,0.0, !- Field 3 Until: 10:00,0.05, !- Field 5 Until: 12:00,0.1, !- Field 7 Until: 13:00,0.2, !- Field 9 Until: 15:00,0.4, !- Field 11 Until: 17:00,0.25, !- Field 13 Until: 20:00,0.50, !- Field 15 Until: 23:00,0.3, !- Field 17 Until: 24:00,0.05, !- Field 19 For: SummerDesignDay, !- Field 21 Until: 24:00,1.0, !- Field 22 For: Friday Saturday, !- Field 24 Until: 01:00,0.05, !- Field 25 Until: 09:00,0.0, !- Field 27 Until: 10:00,0.05, !- Field 29 Until: 12:00,0.1, !- Field 31 Until: 13:00,0.2, !- Field 33 Until: 14:00,0.6, !- Field 35 Until: 15:00,0.4, !- Field 37 Until: 17:00,0.25, !- Field 39 Until: 20:00,0.5, !- Field 41 Until: 23:00,0.3, !- Field 43 Until: 24:00,0.2, !- Field 45 For: WinterDesignDay, !- Field 47 Until: 24:00,0.0, !- Field 48 For: Sunday Holidays AllOtherDays, !- Field 50 Until: 08:00,0.0, !- Field 51 Until: 10:00,0.05, !- Field 53 Until: 11:00,0.1, !- Field 55 Until: 12:00,0.2, !- Field 57 Until: 13:00,0.4, !- Field 59 Until: 14:00,0.6, !- Field 61 Until: 16:00,0.4, !- Field 63 Until: 17:00,0.3, !- Field 65 Until: 19:00,0.6, !- Field 67 Until: 21:00,0.4, !- Field 69 Until: 22:00,0.3, !- Field 71 Until: 23:00,0.2, !- Field 73 Until: 24:00,0.05; !- Field 75 Schedule:Compact, Type2_OCC_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 08:00,0.0, !- Field 3 Until: 09:00,0.05, !- Field 5 Until: 12:00,0.1, !- Field 7 Until: 13:00,0.2, !- Field 9 Until: 14:00,0.4, !- Field 11 Until: 15:00,0.30, !- Field 13 Until: 17:00,0.20, !- Field 15 Until: 19:00,0.5, !- Field 17 Until: 20:00,0.2, !- Field 19 Until: 21:00,0.05, !- Field 21 Until: 24:00,0.00, !- Field 23 For: SummerDesignDay, !- Field 25 Until: 24:00,1.0, !- Field 26 For: Saturday, !- Field 28 Until: 08:00,0.0, !- Field 29 Until: 09:00,0.05, !- Field 31 Until: 11:00,0.1, !- Field 33 Until: 12:00,0.2, !- Field 35 Until: 13:00,0.4, !- Field 37 Until: 14:00,0.6, !- Field 39 Until: 15:00,0.4, !- Field 41 Until: 18:00,0.3, !- Field 43 Until: 19:00,0.05, !- Field 45 Until: 24:00,0.0, !- Field 47 For: WinterDesignDay, !- Field 49 Until: 24:00,0.0, !- Field 50 For: Sunday Holidays AllOtherDays, !- Field 52 Until: 09:00,0.0, !- Field 53 Until: 10:00,0.05, !- Field 55 Until: 11:00,0.1, !- Field 57 Until: 12:00,0.2, !- Field 59 Until: 14:00,0.4, !- Field 61 Until: 15:00,0.3, !- Field 63 Until: 16:00,0.2, !- Field 65 Until: 17:00,0.1, !- Field 67 Until: 18:00,0.05, !- Field 69 Until: 24:00,0.0; !- Field 71 Schedule:Compact, Type3_OCC_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 09:00,0.0, !- Field 3 Until: 10:00,0.11, !- Field 5 Until: 11:00,0.11, !- Field 7 Until: 12:00,0.43, !- Field 9 Until: 13:00,0.46, !- Field 11 Until: 14:00,0.71, !- Field 13 Until: 15:00,0.50, !- Field 15 Until: 16:00,0.69, !- Field 17 Until: 17:00,0.54, !- Field 19 Until: 18:00,0.71, !- Field 21 Until: 19:00,0.34, !- Field 23 Until: 20:00,0.26, !- Field 25 Until: 21:00,0.11, !- Field 27 Until: 24:00,0.00, !- Field 29 For: SummerDesignDay, !- Field 31 Until: 24:00,1.0, !- Field 32 For: Saturday, !- Field 34 Until: 09:00,0.0, !- Field 35 Until: 10:00,0.11, !- Field 37 Until: 11:00,0.11, !- Field 39 Until: 12:00,0.58, !- Field 41 Until: 13:00,0.71, !- Field 43 Until: 14:00,0.74, !- Field 45 Until: 15:00,0.77, !- Field 47 Until: 16:00,0.80, !- Field 49 Until: 17:00,0.74, !- Field 51 Until: 18:00,0.54, !- Field 53 Until: 19:00,0.11, !- Field 55 Until: 24:00,0.00, !- Field 57 For: WinterDesignDay, !- Field 59 Until: 24:00,0.0, !- Field 60 For: Sunday Holidays AllOtherDays, !- Field 62 Until: 10:00,0.0, !- Field 63 Until: 11:00,0.11, !- Field 65 Until: 12:00,0.11, !- Field 67 Until: 13:00,0.43, !- Field 69 Until: 14:00,0.46, !- Field 71 Until: 15:00,0.5, !- Field 73 Until: 16:00,0.69, !- Field 75 Until: 17:00,0.34, !- Field 77 Until: 18:00,0.11, !- Field 79 Until: 21:00,0.0, !- Field 81 Until: 23:00,0.0, !- Field 83 Until: 24:00,0.00; !- Field 85 Schedule:Compact, Type1_LIGHT_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Monday Tuesday Wednesday Thursday, !- Field 2 Until: 8:00,0.05, !- Field 3 Until: 9:00,0.04991, !- Field 4 Until: 10:00,0.4991, !- Field 5 Until: 23:00,0.94829, !- Field 6 Until: 24:00,0.4991, !- Field 7 For: Friday Saturday, !- Field 8 Until: 1:00,0.4991, !- Field 9 Until: 9:00,0.05, !- Field 10 Until: 10:00,0.4991, !- Field 11 Until: 24:00,0.94829, !- Field 12 For: SummerDesignDay, !- Field 13 Until: 24:00,1, !- Field 14 For: WinterDesignDay, !- Field 15 Until: 24:00,0, !- Field 16 For: Sunday Holidays AllOtherDays, !- Field 17 Until: 8:00,0.05, !- Field 18 Until: 9:00,0.04991, !- Field 19 Until: 10:00,0.4991, !- Field 20 Until: 23:00,0.94829, !- Field 21 Until: 24:00,0.4991; !- Field 22 Schedule:Compact, Type2_LIGHT_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 8:00,0.05, !- Field 3 Until: 9:00,0.5, !- Field 4 Until: 20:00,0.95, !- Field 5 Until: 21:00,0.5, !- Field 6 Until: 24:00,0.05, !- Field 7 For: Saturday, !- Field 8 Until: 8:00,0.05, !- Field 9 Until: 9:00,0.5, !- Field 10 Until: 18:00,0.95, !- Field 11 Until: 19:00,0.5, !- Field 12 Until: 24:00,0.05, !- Field 13 For: SummerDesignDay, !- Field 14 Until: 24:00,1, !- Field 15 For: WinterDesignDay, !- Field 16 Until: 24:00,0, !- Field 17 For: Sunday Holidays AllOtherDays, !- Field 18 Until: 9:00,0.05, !- Field 19 Until: 10:00,0.5, !- Field 20 Until: 17:00,0.95, !- Field 21 Until: 18:00,0.5, !- Field 22 Until: 24:00,0.05; !- Field 23 Schedule:Compact, Type3_LIGHT_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 9:00,0.05, !- Field 3 Until: 10:00,0.5, !- Field 4 Until: 20:00,0.95, !- Field 5 Until: 21:00,0.5, !- Field 6 Until: 24:00,0.05, !- Field 7 For: Saturday, !- Field 8 Until: 9:00,0.05, !- Field 9 Until: 10:00,0.5, !- Field 10 Until: 18:00,0.95, !- Field 11 Until: 19:00,0.5, !- Field 12 Until: 24:00,0.05, !- Field 13 For: SummerDesignDay, !- Field 14 Until: 24:00,1, !- Field 15 For: WinterDesignDay, !- Field 16 Until: 24:00,0, !- Field 17 For: Sunday Holidays AllOtherDays, !- Field 18 Until: 10:00,0.05, !- Field 19 Until: 11:00,0.5, !- Field 20 Until: 17:00,0.95, !- Field 21 Until: 18:00,0.5, !- Field 22 Until: 24:00,0.05; !- Field 23 Schedule:Compact, Type1_EQUIP_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Monday Tuesday Wednesday Thursday, !- Field 2 Until: 08:00,0.04915625, !- Field 3 Until: 09:00,0.049814375, !- Field 5 Until: 10:00,0.49814375, !- Field 7 Until: 23:00,0.89665875, !- Field 9 Until: 24:00,0.49814375, !- Field 11 For: Friday Saturday, !- Field 13 Until: 01:00,0.49814375, !- Field 14 Until: 08:00,0.04915625, !- Field 16 Until: 09:00,0.04915625, !- Field 18 Until: 10:00,0.49814375, !- Field 20 Until: 12:00,0.89665875, !- Field 22 Until: 18:00,0.89665875, !- Field 24 Until: 19:00,0.89665875, !- Field 26 Until: 21:00,0.89665875, !- Field 28 Until: 22:00,0.89665875, !- Field 30 Until: 24:00,0.89665875, !- Field 32 For: SummerDesignDay, !- Field 34 Until: 24:00,1.0, !- Field 35 For: WinterDesignDay, !- Field 37 Until: 24:00,0.0, !- Field 38 For: Sunday Holidays AllOtherDays, !- Field 40 Until: 08:00,0.04915625, !- Field 41 Until: 09:00,0.049814375, !- Field 43 Until: 10:00,0.49814375, !- Field 45 Until: 23:00,0.89665875, !- Field 47 Until: 24:00,0.49814375; !- Field 49 Schedule:Compact, Type2_EQUIP_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 07:00,0.04915625, !- Field 3 Until: 08:00,0.04915625, !- Field 5 Until: 09:00,0.49814375, !- Field 7 Until: 20:00,0.89665875, !- Field 9 Until: 21:00,0.49814375, !- Field 11 Until: 24:00,0.04915625, !- Field 13 For: Saturday, !- Field 15 Until: 07:00,0.04915625, !- Field 16 Until: 08:00,0.04915625, !- Field 18 Until: 09:00,0.49814375, !- Field 20 Until: 12:00,0.89665875, !- Field 22 Until: 18:00,0.89665875, !- Field 24 Until: 19:00,0.49814375, !- Field 26 Until: 24:00,0.04915625, !- Field 28 For: SummerDesignDay, !- Field 30 Until: 24:00,1.0, !- Field 31 For: WinterDesignDay, !- Field 33 Until: 24:00,0.0, !- Field 34 For: Sunday Holidays AllOtherDays, !- Field 36 Until: 08:00,0.04915625, !- Field 37 Until: 09:00,0.049814375, !- Field 39 Until: 10:00,0.49814375, !- Field 41 Until: 17:00,0.89665875, !- Field 43 Until: 18:00,0.49814375, !- Field 45 Until: 24:00,0.04915625; !- Field 47 Schedule:Compact, Type3_EQUIP_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 08:00,0.04915625, !- Field 3 Until: 09:00,0.04915625, !- Field 5 Until: 10:00,0.49814375, !- Field 7 Until: 20:00,0.89665875, !- Field 9 Until: 21:00,0.49814375, !- Field 11 Until: 24:00,0.04915625, !- Field 13 For: Saturday, !- Field 15 Until: 08:00,0.04915625, !- Field 16 Until: 09:00,0.04915625, !- Field 18 Until: 10:00,0.49814375, !- Field 20 Until: 12:00,0.89665875, !- Field 22 Until: 18:00,0.89665875, !- Field 24 Until: 19:00,0.49814375, !- Field 26 Until: 21:00,0.04915625, !- Field 28 Until: 22:00,0.04915625, !- Field 30 Until: 24:00,0.04915625, !- Field 32 For: SummerDesignDay, !- Field 34 Until: 24:00,1.0, !- Field 35 For: WinterDesignDay, !- Field 37 Until: 24:00,0.0, !- Field 38 For: Sunday Holidays AllOtherDays, !- Field 40 Until: 09:00,0.04915625, !- Field 41 Until: 10:00,0.04915625, !- Field 43 Until: 11:00,0.49814375, !- Field 45 Until: 17:00,0.89665875, !- Field 47 Until: 18:00,0.49814375, !- Field 49 Until: 24:00,0.04915625; !- Field 51 Schedule:Compact, Type1_Infil_SCH, !- Name fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Monday Tuesday Wednesday Thursday SummerDesignDay, !- Field 2 Until: 08:00,1.0, !- Field 3 Until: 24:00,0.25, !- Field 5 For: Friday Saturday, !- Field 7 Until: 01:00,0.25, !- Field 8 Until: 08:00,1.0, !- Field 10 Until: 24:00,0.25, !- Field 12 For: WinterDesignDay, !- Field 14 Until: 01:00,0.25, !- Field 15 Until: 08:00,1.0, !- Field 17 Until: 24:00,0.25, !- Field 19 For: Sunday Holidays AllOtherDays, !- Field 21 Until: 08:00,1.0, !- Field 22 Until: 24:00,0.25; !- Field 24 Schedule:Compact, Type2_Infil_SCH, !- Name fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 07:00,1.0, !- Field 3 Until: 21:00,0.25, !- Field 5 Until: 24:00,1.0, !- Field 7 For: Saturday, !- Field 9 Until: 07:00,1.0, !- Field 10 Until: 19:00,0.25, !- Field 12 Until: 24:00,1.0, !- Field 14 For: WinterDesignDay, !- Field 16 Until: 07:00,1.0, !- Field 17 Until: 19:00,0.25, !- Field 19 Until: 24:00,1.0, !- Field 21 For: Sunday Holidays AllOtherDays, !- Field 23 Until: 08:00,1.0, !- Field 24 Until: 18:00,0.25, !- Field 26 Until: 24:00,1.0; !- Field 28 Schedule:Compact, Type3_Infil_SCH, !- Name fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 08:00,1.0, !- Field 3 Until: 21:00,0.25, !- Field 5 Until: 24:00,1.0, !- Field 7 For: Saturday, !- Field 9 Until: 08:00,1.0, !- Field 10 Until: 19:00,0.25, !- Field 12 Until: 24:00,1.0, !- Field 14 For: WinterDesignDay, !- Field 16 Until: 08:00,1.0, !- Field 17 Until: 19:00,0.25, !- Field 19 Until: 24:00,1.0, !- Field 21 For: Sunday Holidays AllOtherDays, !- Field 23 Until: 09:00,1.0, !- Field 24 Until: 18:00,0.25, !- Field 26 Until: 24:00,1.0; !- Field 28 Schedule:Compact, INFIL_Door_Opening_SCH, !- Name fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 08:00,0.0, !- Field 3 Until: 12:00,0.131,!- Field 6 Until: 18:00,1.0, !- Field 6 Until: 20:00,0.131,!- Field 10 Until: 24:00,0.0; !- Field 9 Schedule:Compact, Type1_HTGSETP_SCH_YES_OPTIMUM, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Monday Tuesday Wednesday Thursday WinterDesignDay, !- Field 2 Until: 01:00,21.11, !- Field 3 Until: 08:00,15.56, !- Field 5 Until: 09:00,18.33, !- Field 7 Until: 23:00,21.11, !- Field 9 Until: 24:00,21.11, !- Field 11 For SummerDesignDay, !- Field 13 Until: 24:00,15.56, !- Field 14 For: Friday Saturday, !- Field 16 Until: 08:00,15.56, !- Field 17 Until: 09:00,18.33, !- Field 19 Until: 23:00,21.11, !- Field 21 Until: 24:00,21.11, !- Field 23 For: Sunday Holidays AllOtherDays, !- Field 25 Until: 8:00,15.56, !- Field 26 Until: 9:00,18.33, !- Field 28 Until: 23:00,21.11, !- Field 30 Until: 24:00,21.11; !- Field 32 Schedule:Compact, Type1_HTGSETP_SCH_NO_OPTIMUM, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: WinterDesignDay, !- Field 2 Until: 01:00,21.11, !- Field 3 Until: 08:00,15.56, !- Field 5 Until: 09:00,18.33, !- Field 7 Until: 23:00,21.11, !- Field 9 Until: 24:00,21.11, !- Field 11 For: Monday Tuesday Wednesday Thursday, !- Field 13 Until: 01:00,21.11, !- Field 14 Until: 08:00,15.56, !- Field 16 Until: 09:00,21.11, !- Field 18 Until: 23:00,21.11, !- Field 20 Until: 24:00,21.11, !- Field 22 For SummerDesignDay, !- Field 24 Until: 24:00,15.56, !- Field 25 For: Friday Saturday, !- Field 27 Until: 08:00,15.56, !- Field 28 Until: 09:00,21.11, !- Field 30 Until: 23:00,21.11, !- Field 32 Until: 24:00,21.11, !- Field 34 For: Sunday Holidays AllOtherDays, !- Field 36 Until: 8:00,15.56, !- Field 37 Until: 9:00,21.11, !- Field 39 Until: 23:00,21.11, !- Field 41 Until: 24:00,21.11; !- Field 43 Schedule:Compact, Type2_HTGSETP_SCH_YES_OPTIMUM, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays WinterDesignDay, !- Field 2 Until: 07:00,15.56, !- Field 3 Until: 08:00,18.33, !- Field 5 Until: 21:00,21.11, !- Field 7 Until: 24:00,15.56, !- Field 9 For SummerDesignDay, !- Field 11 Until: 24:00,15.56, !- Field 12 For: Saturday, !- Field 14 Until: 07:00,15.56, !- Field 15 Until: 08:00,18.33, !- Field 17 Until: 19:00,21.11, !- Field 19 Until: 24:00,15.56, !- Field 21 For: Sunday Holidays AllOtherDays, !- Field 23 Until: 8:00,15.56, !- Field 24 Until: 9:00,18.33, !- Field 26 Until: 18:00,21.11, !- Field 28 Until: 24:00,15.56; !- Field 30 Schedule:Compact, Type2_HTGSETP_SCH_NO_OPTIMUM, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: WinterDesignDay, !- Field 2 Until: 07:00,15.56, !- Field 3 Until: 08:00,18.33, !- Field 5 Until: 21:00,21.11, !- Field 7 Until: 24:00,15.56, !- Field 9 For: Weekdays, !- Field 11 Until: 07:00,15.56, !- Field 12 Until: 08:00,21.11, !- Field 14 Until: 21:00,21.11, !- Field 16 Until: 24:00,15.56, !- Field 18 For SummerDesignDay, !- Field 20 Until: 24:00,15.56, !- Field 21 For: Saturday, !- Field 23 Until: 07:00,15.56, !- Field 24 Until: 08:00,21.11, !- Field 26 Until: 19:00,21.11, !- Field 28 Until: 24:00,15.56, !- Field 30 For: Sunday Holidays AllOtherDays, !- Field 32 Until: 8:00,15.56, !- Field 33 Until: 9:00,21.11, !- Field 35 Until: 18:00,21.11, !- Field 37 Until: 24:00,15.56; !- Field 39 Schedule:Compact, Type3_HTGSETP_SCH_YES_OPTIMUM, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays WinterDesignDay, !- Field 2 Until: 08:00,15.56, !- Field 3 Until: 09:00,18.33, !- Field 5 Until: 21:00,21.11, !- Field 7 Until: 24:00,15.56, !- Field 9 For SummerDesignDay, !- Field 11 Until: 24:00,15.56, !- Field 12 For: Saturday, !- Field 14 Until: 08:00,15.56, !- Field 15 Until: 09:00,18.33, !- Field 17 Until: 19:00,21.11, !- Field 19 Until: 24:00,15.56, !- Field 21 For: Sunday Holidays AllOtherDays, !- Field 23 Until: 9:00,15.56, !- Field 24 Until: 10:00,18.33, !- Field 26 Until: 18:00,21.11, !- Field 28 Until: 24:00,15.56; !- Field 30 Schedule:Compact, Type3_HTGSETP_SCH_NO_OPTIMUM, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: WinterDesignDay, !- Field 2 Until: 08:00,15.56, !- Field 3 Until: 09:00,18.33, !- Field 5 Until: 21:00,21.11, !- Field 7 Until: 24:00,15.56, !- Field 9 For: Weekdays, !- Field 11 Until: 08:00,15.56, !- Field 12 Until: 09:00,21.11, !- Field 14 Until: 21:00,21.11, !- Field 16 Until: 24:00,15.56, !- Field 18 For SummerDesignDay, !- Field 20 Until: 24:00,15.56, !- Field 21 For: Saturday, !- Field 23 Until: 08:00,15.56, !- Field 24 Until: 09:00,21.11, !- Field 26 Until: 19:00,21.11, !- Field 28 Until: 24:00,15.56, !- Field 30 For: Sunday Holidays AllOtherDays, !- Field 32 Until: 9:00,15.56, !- Field 33 Until: 10:00,21.11, !- Field 35 Until: 18:00,21.11, !- Field 37 Until: 24:00,15.56; !- Field 39 Schedule:Compact, Type1_CLGSETP_SCH_YES_OPTIMUM, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Monday Tuesday Wednesday Thursday SummerDesignDay, !- Field 2 Until: 08:00,29.44, !- Field 3 Until: 09:00,26.67, !- Field 5 Until: 23:00,23.89, !- Field 7 Until: 24:00,23.89, !- Field 9 For WinterDesignDay, !- Field 11 Until: 24:00,29.44, !- Field 12 For: Friday Saturday, !- Field 14 Until: 01:00,23.89, !- Field 15 Until: 08:00,29.44, !- Field 17 Until: 09:00,26.67, !- Field 19 Until: 23:00,23.89, !- Field 21 Until: 24:00,23.89, !- Field 23 For: Sunday Holidays AllOtherDays, !- Field 25 Until: 8:00,29.44, !- Field 26 Until: 8:00,26.67, !- Field 28 Until: 23:00,23.89, !- Field 30 Until: 24:00,23.89; !- Field 32 Schedule:Compact, Type1_CLGSETP_SCH_NO_OPTIMUM, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 08:00,29.44, !- Field 3 Until: 09:00,26.67, !- Field 5 Until: 23:00,23.89, !- Field 7 Until: 24:00,23.89, !- Field 9 For: Monday Tuesday Wednesday Thursday, !- Field 11 Until: 08:00,29.44, !- Field 12 Until: 09:00,23.89, !- Field 14 Until: 23:00,23.89, !- Field 16 Until: 24:00,23.89, !- Field 18 For WinterDesignDay, !- Field 20 Until: 24:00,29.44, !- Field 21 For: Friday Saturday, !- Field 23 Until: 01:00,23.89, !- Field 24 Until: 08:00,29.44, !- Field 26 Until: 09:00,23.89, !- Field 28 Until: 23:00,23.89, !- Field 30 Until: 24:00,23.89, !- Field 32 For: Sunday Holidays AllOtherDays, !- Field 34 Until: 8:00,29.44, !- Field 35 Until: 8:00,26.67, !- Field 37 Until: 23:00,23.89, !- Field 39 Until: 24:00,23.89; !- Field 41 Schedule:Compact, Type1_CLGSETP_SCH_NO_SETBACK, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 08:00,29.44, !- Field 3 Until: 09:00,26.67, !- Field 5 Until: 23:00,23.89, !- Field 7 Until: 24:00,23.89, !- Field 9 For: Monday Tuesday Wednesday Thursday, !- Field 11 Until: 08:00,23.89, !- Field 12 Until: 09:00,23.89, !- Field 14 Until: 23:00,23.89, !- Field 16 Until: 24:00,23.89, !- Field 18 For WinterDesignDay, !- Field 20 Until: 24:00,29.44, !- Field 21 For: Friday Saturday, !- Field 23 Until: 01:00,23.89, !- Field 24 Until: 08:00,23.89, !- Field 26 Until: 09:00,23.89, !- Field 28 Until: 23:00,23.89, !- Field 30 Until: 24:00,23.89, !- Field 32 For: Sunday Holidays AllOtherDays, !- Field 34 Until: 8:00,23.89, !- Field 35 Until: 8:00,23.89, !- Field 37 Until: 23:00,23.89, !- Field 39 Until: 24:00,23.89; !- Field 41 Schedule:Compact, Type2_CLGSETP_SCH_YES_OPTIMUM, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 07:00,29.44, !- Field 3 Until: 08:00,26.67, !- Field 5 Until: 20:00,23.89, !- Field 7 Until: 24:00,29.44, !- Field 9 For WinterDesignDay, !- Field 11 Until: 24:00,29.44, !- Field 12 For: Saturday, !- Field 14 Until: 07:00,29.44, !- Field 15 Until: 08:00,26.67, !- Field 17 Until: 18:00,23.89, !- Field 19 Until: 24:00,29.44, !- Field 21 For: Sunday Holidays AllOtherDays, !- Field 23 Until: 8:00,29.44, !- Field 24 Until: 9:00,26.67, !- Field 26 Until: 17:00,23.89, !- Field 28 Until: 24:00,29.44; !- Field 30 Schedule:Compact, Type2_CLGSETP_SCH_NO_OPTIMUM, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 07:00,29.44, !- Field 3 Until: 08:00,26.67, !- Field 5 Until: 20:00,23.89, !- Field 7 Until: 24:00,29.44, !- Field 9 For: Weekdays, !- Field 11 Until: 07:00,29.44, !- Field 12 Until: 08:00,23.89, !- Field 14 Until: 20:00,23.89, !- Field 16 Until: 24:00,29.44, !- Field 18 For WinterDesignDay, !- Field 20 Until: 24:00,29.44, !- Field 21 For: Saturday, !- Field 23 Until: 07:00,29.44, !- Field 24 Until: 08:00,23.89, !- Field 26 Until: 18:00,23.89, !- Field 28 Until: 24:00,29.44, !- Field 30 For: Sunday Holidays AllOtherDays, !- Field 32 Until: 8:00,29.44, !- Field 33 Until: 9:00,23.89, !- Field 35 Until: 17:00,23.89, !- Field 37 Until: 24:00,29.44; !- Field 39 Schedule:Compact, Type2_CLGSETP_SCH_NO_SETBACK, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 07:00,29.44, !- Field 3 Until: 08:00,26.67, !- Field 5 Until: 20:00,23.89, !- Field 7 Until: 24:00,29.44, !- Field 9 For: Weekdays, !- Field 11 Until: 07:00,23.89, !- Field 12 Until: 08:00,23.89, !- Field 14 Until: 20:00,23.89, !- Field 16 Until: 24:00,23.89, !- Field 18 For WinterDesignDay, !- Field 20 Until: 24:00,29.44, !- Field 21 For: Saturday, !- Field 23 Until: 07:00,23.89, !- Field 24 Until: 08:00,23.89, !- Field 26 Until: 18:00,23.89, !- Field 28 Until: 24:00,23.89, !- Field 30 For: Sunday Holidays AllOtherDays, !- Field 32 Until: 8:00,23.89, !- Field 33 Until: 9:00,23.89, !- Field 35 Until: 17:00,23.89, !- Field 37 Until: 24:00,23.89; !- Field 39 Schedule:Compact, Type3_CLGSETP_SCH_YES_OPTIMUM, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 08:00,29.44, !- Field 3 Until: 09:00,26.67, !- Field 5 Until: 21:00,23.89, !- Field 7 Until: 24:00,29.44, !- Field 9 For WinterDesignDay, !- Field 11 Until: 24:00,29.44, !- Field 12 For: Saturday, !- Field 14 Until: 08:00,29.44, !- Field 15 Until: 09:00,26.67, !- Field 17 Until: 18:00,23.89, !- Field 19 Until: 24:00,29.44, !- Field 21 For: Sunday Holidays AllOtherDays, !- Field 23 Until: 9:00,29.44, !- Field 24 Until: 10:00,26.67, !- Field 26 Until: 17:00,23.89, !- Field 28 Until: 24:00,29.44; !- Field 30 Schedule:Compact, Type3_CLGSETP_SCH_NO_OPTIMUM, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 08:00,29.44, !- Field 3 Until: 09:00,26.67, !- Field 5 Until: 21:00,23.89, !- Field 7 Until: 24:00,29.44, !- Field 9 For: Weekdays, !- Field 11 Until: 08:00,29.44, !- Field 12 Until: 09:00,23.89, !- Field 14 Until: 21:00,23.89, !- Field 16 Until: 24:00,29.44, !- Field 18 For WinterDesignDay, !- Field 20 Until: 24:00,29.44, !- Field 21 For: Saturday, !- Field 23 Until: 08:00,29.44, !- Field 24 Until: 09:00,23.89, !- Field 26 Until: 18:00,23.89, !- Field 28 Until: 24:00,29.44, !- Field 30 For: Sunday Holidays AllOtherDays, !- Field 32 Until: 9:00,29.44, !- Field 33 Until: 10:00,23.89, !- Field 35 Until: 17:00,23.89, !- Field 37 Until: 24:00,29.44; !- Field 39 Schedule:Compact, Type3_CLGSETP_SCH_NO_SETBACK, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 08:00,29.44, !- Field 3 Until: 09:00,26.67, !- Field 5 Until: 21:00,23.89, !- Field 7 Until: 24:00,29.44, !- Field 9 For: Weekdays, !- Field 11 Until: 08:00,23.89, !- Field 12 Until: 09:00,23.89, !- Field 14 Until: 21:00,23.89, !- Field 16 Until: 24:00,23.89, !- Field 18 For WinterDesignDay, !- Field 20 Until: 24:00,29.44, !- Field 21 For: Saturday, !- Field 23 Until: 08:00,23.89, !- Field 24 Until: 09:00,23.89, !- Field 26 Until: 18:00,23.89, !- Field 28 Until: 24:00,23.89, !- Field 30 For: Sunday Holidays AllOtherDays, !- Field 32 Until: 9:00,23.89, !- Field 33 Until: 10:00,23.89, !- Field 35 Until: 17:00,23.89, !- Field 37 Until: 24:00,23.89; !- Field 39 Schedule:Compact, Type1_FAN_SCH, !- Name on/off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Monday Tuesday Wednesday Thursday SummerDesignDay, !- Field 2 Until: 08:00,0.0, !- Field 3 Until: 23:00,1.0, !- Field 5 Until: 24:00,1.0, !- Field 7 For: Friday Saturday WinterDesignDay, !- Field 9 Until: 01:00,1.0, !- Field 10 Until: 08:00,0.0, !- Field 12 Until: 22:00,1.0, !- Field 14 Until: 24:00,1.0, !- Field 16 For: Sunday Holidays AllOtherDays, !- Field 18 Until: 08:00,0.0, !- Field 19 Until: 23:00,1.0, !- Field 21 Until: 24:00,1.0; !- Field 23 Schedule:Compact, Type2_FAN_SCH, !- Name on/off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 07:00,0.0, !- Field 3 Until: 21:00,1.0, !- Field 5 Until: 24:00,0.0, !- Field 7 For: Saturday WinterDesignDay, !- Field 9 Until: 07:00,0.0, !- Field 10 Until: 19:00,1.0, !- Field 12 Until: 24:00,0.0, !- Field 14 For: Sunday Holidays AllOtherDays, !- Field 16 Until: 08:00,0.0, !- Field 17 Until: 18:00,1.0, !- Field 19 Until: 24:00,0.0; !- Field 21 Schedule:Compact, Type3_FAN_SCH, !- Name on/off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 08:00,0.0, !- Field 3 Until: 21:00,1.0, !- Field 5 Until: 24:00,0.0, !- Field 7 For: Saturday WinterDesignDay, !- Field 9 Until: 08:00,0.0, !- Field 10 Until: 19:00,1.0, !- Field 12 Until: 24:00,0.0, !- Field 14 For: Sunday Holidays AllOtherDays, !- Field 16 Until: 09:00,0.0, !- Field 17 Until: 18:00,1.0, !- Field 19 Until: 24:00,0.0; !- Field 21 Schedule:Compact, Type1_MinOA_MotorizedDamper_SCH, !- Name fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Monday Tuesday Wednesday Thursday SummerDesignDay, !- Field 2 Until: 09:00,0.0, !- Field 3 Until: 23:00,1.0, !- Field 5 Until: 24:00,1.0, !- Field 7 For: Friday Saturday WinterDesignDay, !- Field 9 Until: 01:00,1.0, !- Field 10 Until: 09:00,0.0, !- Field 12 Until: 22:00,1.0, !- Field 14 Until: 24:00,1.0, !- Field 16 For: Sunday Holidays AllOtherDays, !- Field 18 Until: 09:00,0.0, !- Field 19 Until: 23:00,1.0, !- Field 21 Until: 24:00,1.0; !- Field 23 Schedule:Compact, Type2_MinOA_MotorizedDamper_SCH, !- Name fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 08:00,0.0, !- Field 3 Until: 21:00,1.0, !- Field 5 Until: 24:00,0.0, !- Field 7 For: Saturday WinterDesignDay, !- Field 9 Until: 08:00,0.0, !- Field 10 Until: 19:00,1.0, !- Field 12 Until: 24:00,0.0, !- Field 14 For: Sunday Holidays AllOtherDays, !- Field 16 Until: 09:00,0.0, !- Field 17 Until: 18:00,1.0, !- Field 19 Until: 24:00,0.0; !- Field 21 Schedule:Compact, Type3_MinOA_MotorizedDamper_SCH, !- Name fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 09:00,0.0, !- Field 3 Until: 21:00,1.0, !- Field 5 Until: 24:00,0.0, !- Field 7 For: Saturday WinterDesignDay, !- Field 9 Until: 09:00,0.0, !- Field 10 Until: 19:00,1.0, !- Field 12 Until: 24:00,0.0, !- Field 14 For: Sunday Holidays AllOtherDays, !- Field 16 Until: 10:00,0.0, !- Field 17 Until: 18:00,1.0, !- Field 19 Until: 24:00,0.0; !- Field 21 Schedule:Compact, Type1_SWH_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Monday Tuesday Wednesday Thursday SummerDesignDay, !- Field 2 Until: 01:00,0.00, !- Field 3 Until: 03:00,0.00, !- Field 5 Until: 07:00,0.00, !- Field 7 Until: 09:00,0.04, !- Field 9 Until: 10:00,0.15, !- Field 11 Until: 11:00,0.23, !- Field 13 Until: 12:00,0.32, !- Field 15 Until: 13:00,0.41, !- Field 17 Until: 14:00,0.62, !- Field 19 Until: 15:00,0.60, !- Field 21 Until: 16:00,0.55, !- Field 23 Until: 17:00,0.45, !- Field 25 Until: 18:00,0.50, !- Field 27 Until: 19:00,0.46, !- Field 29 Until: 20:00,0.47, !- Field 31 Until: 21:00,0.34, !- Field 33 Until: 22:00,0.33, !- Field 35 Until: 23:00,0.23, !- Field 37 Until: 24:00,0.13, !- Field 39 For: Friday Saturday WinterDesignDay, !- Field 41 Until: 01:00,0.13, !- Field 42 Until: 02:00,0.00, !- Field 44 Until: 03:00,0.00, !- Field 46 Until: 07:00,0.00, !- Field 48 Until: 08:00,0.00, !- Field 50 Until: 09:00,0.00, !- Field 52 Until: 10:00,0.20, !- Field 54 Until: 11:00,0.23, !- Field 56 Until: 12:00,0.32, !- Field 58 Until: 13:00,0.41, !- Field 60 Until: 14:00,0.65, !- Field 62 Until: 15:00,0.6, !- Field 64 Until: 16:00,0.55, !- Field 66 Until: 17:00,0.45, !- Field 68 Until: 18:00,0.50, !- Field 70 Until: 19:00,0.46, !- Field 72 Until: 20:00,0.47, !- Field 74 Until: 21:00,0.34, !- Field 76 Until: 22:00,0.33, !- Field 78 Until: 23:00,0.23, !- Field 80 Until: 24:00,0.13, !- Field 82 For: Sunday Holidays AllOtherDays, !- Field 84 Until: 01:00,0.00, !- Field 85 Until: 03:00,0.00, !- Field 87 Until: 07:00,0.00, !- Field 89 Until: 08:00,0.00, !- Field 91 Until: 09:00,0.1, !- Field 93 Until: 10:00,0.14, !- Field 95 Until: 11:00,0.29, !- Field 97 Until: 12:00,0.31, !- Field 99 Until: 14:00,0.36, !- Field 101 Until: 15:00,0.34, !- Field 103 Until: 16:00,0.35, !- Field 105 Until: 17:00,0.37, !- Field 107 Until: 18:00,0.34, !- Field 109 Until: 19:00,0.25, !- Field 111 Until: 20:00,0.27, !- Field 113 Until: 21:00,0.21, !- Field 115 Until: 22:00,0.16, !- Field 117 Until: 23:00,0.16, !- Field 119 Until: 24:00,0.1; !- Field 121 Schedule:Compact, Type2_SWH_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 01:00,0.00, !- Field 3 Until: 03:00,0.00, !- Field 5 Until: 08:00,0.00, !- Field 7 Until: 09:00,0.15, !- Field 9 Until: 10:00,0.23, !- Field 11 Until: 11:00,0.32, !- Field 13 Until: 12:00,0.41, !- Field 15 Until: 13:00,0.57, !- Field 17 Until: 14:00,0.62, !- Field 19 Until: 15:00,0.61, !- Field 21 Until: 16:00,0.50, !- Field 23 Until: 17:00,0.45, !- Field 25 Until: 18:00,0.46, !- Field 27 Until: 19:00,0.47, !- Field 29 Until: 20:00,0.42, !- Field 31 Until: 21:00,0.34, !- Field 33 Until: 22:00,0.00, !- Field 35 Until: 23:00,0.00, !- Field 37 Until: 24:00,0.00, !- Field 39 For: Saturday WinterDesignDay, !- Field 41 Until: 01:00,0.00, !- Field 42 Until: 02:00,0.00, !- Field 44 Until: 03:00,0.00, !- Field 46 Until: 07:00,0.00, !- Field 48 Until: 08:00,0.00, !- Field 50 Until: 09:00,0.2, !- Field 52 Until: 10:00,0.24, !- Field 54 Until: 11:00,0.27, !- Field 56 Until: 12:00,0.42, !- Field 58 Until: 13:00,0.54, !- Field 60 Until: 14:00,0.62, !- Field 62 Until: 15:00,0.6, !- Field 64 Until: 16:00,0.50, !- Field 66 Until: 17:00,0.48, !- Field 68 Until: 18:00,0.47, !- Field 70 Until: 19:00,0.34, !- Field 72 Until: 20:00,0.00, !- Field 74 Until: 21:00,0.00, !- Field 76 Until: 22:00,0.00, !- Field 78 Until: 23:00,0.00, !- Field 80 Until: 24:00,0.00, !- Field 82 For: Sunday Holidays AllOtherDays, !- Field 84 Until: 01:00,0.00, !- Field 85 Until: 03:00,0.00, !- Field 87 Until: 07:00,0.00, !- Field 89 Until: 08:00,0.00, !- Field 91 Until: 09:00,0.00, !- Field 93 Until: 10:00,0.12, !- Field 95 Until: 11:00,0.14, !- Field 97 Until: 12:00,0.29, !- Field 99 Until: 13:00,0.33, !- Field 101 Until: 14:00,0.40, !- Field 103 Until: 15:00,0.36, !- Field 105 Until: 16:00,0.37, !- Field 107 Until: 17:00,0.35, !- Field 109 Until: 18:00,0.37, !- Field 111 Until: 19:00,0.00, !- Field 113 Until: 21:00,0.00, !- Field 115 Until: 22:00,0.00, !- Field 117 Until: 23:00,0.00, !- Field 119 Until: 24:00,0.00; !- Field 121 Schedule:Compact, Type3_SWH_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 01:00,0.00, !- Field 3 Until: 03:00,0.00, !- Field 5 Until: 07:00,0.00, !- Field 7 Until: 09:00,0.00, !- Field 9 Until: 10:00,0.15, !- Field 11 Until: 11:00,0.25, !- Field 13 Until: 12:00,0.41, !- Field 15 Until: 13:00,0.57, !- Field 17 Until: 14:00,0.62, !- Field 19 Until: 15:00,0.61, !- Field 21 Until: 16:00,0.50, !- Field 23 Until: 17:00,0.45, !- Field 25 Until: 18:00,0.46, !- Field 27 Until: 19:00,0.47, !- Field 29 Until: 20:00,0.42, !- Field 31 Until: 21:00,0.34, !- Field 33 Until: 22:00,0.00, !- Field 35 Until: 23:00,0.00, !- Field 37 Until: 24:00,0.00, !- Field 39 For: Saturday WinterDesignDay, !- Field 41 Until: 01:00,0.00, !- Field 42 Until: 02:00,0.00, !- Field 44 Until: 03:00,0.00, !- Field 46 Until: 07:00,0.00, !- Field 48 Until: 08:00,0.00, !- Field 50 Until: 09:00,0.00, !- Field 52 Until: 10:00,0.20, !- Field 54 Until: 11:00,0.27, !- Field 56 Until: 12:00,0.42, !- Field 58 Until: 13:00,0.54, !- Field 60 Until: 14:00,0.59, !- Field 62 Until: 15:00,0.6, !- Field 64 Until: 16:00,0.49, !- Field 66 Until: 17:00,0.48, !- Field 68 Until: 18:00,0.47, !- Field 70 Until: 19:00,0.46, !- Field 72 Until: 20:00,0.00, !- Field 74 Until: 21:00,0.00, !- Field 76 Until: 22:00,0.00, !- Field 78 Until: 23:00,0.00, !- Field 80 Until: 24:00,0.00, !- Field 82 For: Sunday Holidays AllOtherDays, !- Field 84 Until: 01:00,0.00, !- Field 85 Until: 03:00,0.00, !- Field 87 Until: 07:00,0.00, !- Field 89 Until: 08:00,0.00, !- Field 91 Until: 09:00,0.00, !- Field 93 Until: 10:00,0.00, !- Field 95 Until: 11:00,0.12, !- Field 97 Until: 12:00,0.29, !- Field 99 Until: 13:00,0.31, !- Field 101 Until: 15:00,0.36, !- Field 103 Until: 16:00,0.34, !- Field 105 Until: 17:00,0.35, !- Field 107 Until: 18:00,0.37, !- Field 109 Until: 19:00,0.00, !- Field 111 Until: 20:00,0.00, !- Field 113 Until: 22:00,0.00, !- Field 115 Until: 23:00,0.00, !- Field 117 Until: 24:00,0.00; !- Field 119 Schedule:Compact, ALWAYS_ON, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1.0; !- Field 3 Schedule:Compact, Exterior_Lgt_ALWAYS_ON, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1; !- Field 3 Schedule:Compact, Exterior_Lgt_189_1, !- Name Fraction, !- Schedule Type Limits Name Through:12/31, !- Field 1 For:Weekdays, !- Field 2 Until: 9:00,0.5, !- Field 3 Until: 24:00,1.0, !- Field 5 For:Saturday, !- Field 7 Until: 9:00,0.5, !- Field 8 Until: 24:00,1.0, !- Field 10 For:Sunday Holidays AllOtherDays, !- Field 12 Until: 9:00,0.5, !- Field 13 Until: 24:00,1.0; !- Field 15 Schedule:Compact, MinOA_Sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1.0; !- Field 3 Schedule:Compact, Dual Zone Control Type Sched, !- Name Control Type, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,4; !- Field 3 Schedule:Compact, ACTIVITY_SCH, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,120.; !- Field 3 Schedule:Compact, WORK_EFF_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.0; !- Field 3 Schedule:Compact, AIR_VELO_SCH, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, CLOTHING_SCH, !- Name Any Number, !- Schedule Type Limits Name Through: 04/30, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1.0, !- Field 3 Through: 09/30, !- Field 5 For: AllDays, !- Field 6 Until: 24:00,0.5, !- Field 7 Through: 12/31, !- Field 9 For: AllDays, !- Field 10 Until: 24:00,1.0; !- Field 11 Schedule:Compact, Hot Water Setpoint Temp Schedule, !- Name Any Number, !- Schedule Type Limits Name THROUGH: 12/31, !- Field 1 FOR: AllDays, !- Field 2 UNTIL: 24:00,60.0; !- Field 3 Schedule:Constant,SZ_system_OA_Max_Frac_SCH,Fraction, 0.75; Construction:FfactorGroundFloor, LGstore1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 348.3864, !- Area 53.34; !- PerimeterExposed Construction:FfactorGroundFloor, SMstore1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 174.19320000000005, !- Area 15.239999999999998; !- PerimeterExposed Construction:FfactorGroundFloor, SMstore2_Floor_Ffactor, !- Name 0.88281, !- F-Factor 174.19319999999993, !- Area 15.240000000000002; !- PerimeterExposed Construction:FfactorGroundFloor, SMstore3_Floor_Ffactor, !- Name 0.88281, !- F-Factor 174.19320000000005, !- Area 15.240000000000002; !- PerimeterExposed Construction:FfactorGroundFloor, SMstore4_Floor_Ffactor, !- Name 0.88281, !- F-Factor 174.19320000000005, !- Area 15.239999999999995; !- PerimeterExposed Construction:FfactorGroundFloor, LGstore2_Floor_Ffactor, !- Name 0.88281, !- F-Factor 348.38639999999987, !- Area 30.480000000000004; !- PerimeterExposed Construction:FfactorGroundFloor, SMstore5_Floor_Ffactor, !- Name 0.88281, !- F-Factor 174.19319999999993, !- Area 15.239999999999995; !- PerimeterExposed Construction:FfactorGroundFloor, SMstore6_Floor_Ffactor, !- Name 0.88281, !- F-Factor 174.19320000000016, !- Area 15.240000000000009; !- PerimeterExposed Construction:FfactorGroundFloor, SMstore7_Floor_Ffactor, !- Name 0.88281, !- F-Factor 174.1931999999997, !- Area 15.23999999999998; !- PerimeterExposed Construction:FfactorGroundFloor, SMstore8_Floor_Ffactor, !- Name 0.88281, !- F-Factor 174.1932000000004, !- Area 38.10000000000001; !- PerimeterExposed Zone, LGstore1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier -9999.0000, !- Ceiling Height {m} 1805.2000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area BuildingSurface:Detailed, LGstore1_Floor, !- Name Floor, !- Surface Type LGstore1_Floor_Ffactor, !- Construction Name LGstore1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m} 15.2400,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.2400,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, LGstore1_Wall_2, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name LGstore1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 0.0000,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, LGstore1_Roof, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name LGstore1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.2400,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 0.0000,22.8600,5.1800, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,5.1800, !- X,Y,Z ==> Vertex 3 {m} 15.2400,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, LGstore1_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name LGstore1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.2400,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 15.2400,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m} !- =========== ALL OBJECTS IN CLASS: FENESTRATIONSURFACE:DETAILED =========== FenestrationSurface:Detailed, LGstore1_Wall_3_Door_1, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name LGstore1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 4.730,22.8600,2.1300, !- X,Y,Z ==> Vertex 1 {m} 4.730,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 2.900,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 2.900,22.8600,2.1300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, LGstore1_Wall_3_Door_2, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name LGstore1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 12.350,22.8600,2.1300, !- X,Y,Z ==> Vertex 1 {m} 12.350,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 10.520,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 10.520,22.8600,2.1300; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, LGstore1_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name LGstore1, !- Zone Name Surface, !- Outside Boundary Condition SMstore1_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.2400,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m} 15.2400,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.2400,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 15.2400,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, LGstore1_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name LGstore1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.2400,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 15.2400,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, LGstore1_Wall_1_Window_1,!- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name LGstore1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.610,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m} 0.610,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m} 2.740,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m} 2.740,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, LGstore1_Wall_1_Window_2,!- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name LGstore1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 4.880,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m} 4.880,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m} 7.010,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m} 7.010,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, LGstore1_Wall_1_Window_3,!- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name LGstore1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 8.230,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m} 8.230,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m} 10.360,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m} 10.360,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, LGstore1_Wall_1_Window_4,!- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name LGstore1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 12.500,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m} 12.500,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m} 14.630,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m} 14.630,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, LGstore1_Wall_1_Door_1, !- Name GlassDoor, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name LGstore1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 2.900,0.0000,2.1300, !- X,Y,Z ==> Vertex 1 {m} 2.900,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 4.730,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 4.730,0.0000,2.1300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, LGstore1_Wall_1_Door_2, !- Name GlassDoor, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name LGstore1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 10.520,0.0000,2.1300, !- X,Y,Z ==> Vertex 1 {m} 10.520,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 12.350,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 12.350,0.0000,2.1300; !- X,Y,Z ==> Vertex 4 {m} InternalMass, LGstore1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name LGstore1, !- Zone Name 696.7728; !- Surface Area {m2} !- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION =========== ZoneInfiltration:DesignFlowRate, LGstore1_Infiltration, !- Name LGstore1, !- Zone or ZoneList Name Type1_Infil_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000251651008, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, LGstore1_Door_Infiltration, !- Name LGstore1, !- Zone or ZoneList Name INFIL_Door_Opening_SCH, !- Schedule Name Flow/Zone, !- Design Flow Rate Calculation Method 0.241164917, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} , !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0., !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient People, LGstore1, !- Name LGstore1, !- Zone or ZoneList Name Type1_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 29.9961, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type !- =========== ALL OBJECTS IN CLASS: LIGHTS =========== Lights, LGstore1_Lights, !- Name LGstore1, !- Zone or ZoneList Name Type1_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 9.584185835, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, LGstore1_Lights_allowance, !- Name LGstore1, !- Zone or ZoneList Name Type1_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 5.694108611, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature ElectricEquipment, LGstore1_MiscPlug_Equip, !- Name LGstore1, !- Zone or ZoneList Name TYPE1_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1498.0615, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory Sizing:Zone, LGstore1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA LGstore1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA LGstore1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.001181026, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} ZoneControl:Thermostat, LGstore1 Thermostat, !- Name LGstore1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LGstore1 DualSPSched; !- Control 1 Name ThermostatSetpoint:DualSetpoint, LGstore1 DualSPSched, !- Name Type1_HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name Type1_CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ZoneHVAC:EquipmentConnections, LGstore1, !- Zone Name LGstore1 Equipment, !- Zone Conditioning Equipment List Name LGstore1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name LGstore1 Air Node, !- Zone Air Node Name LGstore1 Return Air Node Name; !- Zone Return Air Node Name NodeList, LGstore1 Inlet Nodes, !- Name LGstore1 Direct Air Inlet Node Name; !- Node 1 Name ZoneHVAC:EquipmentList, LGstore1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type LGstore1 Direct Air, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence AirTerminal:SingleDuct:Uncontrolled, LGstore1 Direct Air, !- Name ALWAYS_ON, !- Availability Schedule Name LGstore1 Direct Air Inlet Node Name, !- Zone Supply Air Node Name AUTOSIZE; !- Maximum Air Flow Rate {m3/s} SetpointManager:SingleZone:Heating, SupAirTemp MngrLGstore1 - Htg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature 48.88, !- Maximum Supply Air Temperature LGstore1, !- Control Zone Name LGstore1 Air Node, !- Zone Node Name LGstore1 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_1:1_Unitary_PackageCoolCoil air inlet; !- Setpoint Node or NodeList Name SetpointManager:SingleZone:Cooling, SupAirTemp MngrLGstore1 - Clg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature 48.88, !- Maximum Supply Air Temperature LGstore1, !- Control Zone Name LGstore1 Air Node, !- Zone Node Name LGstore1 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_1:1 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name Zone, SMstore1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier -9999.0000, !- Ceiling Height {m} 902.6000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area BuildingSurface:Detailed, SMstore1_Floor, !- Name Floor, !- Surface Type SMstore1_Floor_Ffactor, !- Construction Name SMstore1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.2400,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m} 22.8600,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 22.8600,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 15.2400,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore1_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name SMstore1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.2400,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m} 15.2400,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 22.8600,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 22.8600,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore1_Wall_1_Window_1,!- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name SMstore1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 15.850,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m} 15.850,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m} 17.980,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m} 17.980,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore1_Wall_1_Window_2,!- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name SMstore1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 20.120,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m} 20.120,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m} 22.250,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m} 22.250,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore1_Wall_1_Door, !- Name GlassDoor, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name SMstore1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 18.140,0.0000,2.1300, !- X,Y,Z ==> Vertex 1 {m} 18.140,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 19.970,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 19.970,0.0000,2.1300; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore1_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name SMstore1, !- Zone Name Surface, !- Outside Boundary Condition LGstore1_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.2400,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 15.2400,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.2400,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 15.2400,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore1_Roof, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name SMstore1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 22.8600,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 15.2400,22.8600,5.1800, !- X,Y,Z ==> Vertex 2 {m} 15.2400,0.0000,5.1800, !- X,Y,Z ==> Vertex 3 {m} 22.8600,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore1_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name SMstore1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 22.8600,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 22.8600,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.2400,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 15.2400,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore1_Wall_3_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name SMstore1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 19.970,22.8600,2.1300, !- X,Y,Z ==> Vertex 1 {m} 19.970,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 18.140,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 18.140,22.8600,2.1300; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore1_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name SMstore1, !- Zone Name Surface, !- Outside Boundary Condition SMstore2_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 22.8600,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m} 22.8600,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 22.8600,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 22.8600,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m} InternalMass, SMstore1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name SMstore1, !- Zone Name 348.3864; !- Surface Area {m2} !- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION =========== ZoneInfiltration:DesignFlowRate, SMstore1_Infiltration, !- Name SMstore1, !- Zone or ZoneList Name Type1_Infil_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000177458624, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, SMstore1_Door_Infiltration, !- Name SMstore1, !- Zone or ZoneList Name INFIL_Door_Opening_SCH, !- Schedule Name Flow/Zone, !- Design Flow Rate Calculation Method 0.134504895, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} , !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0., !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient People, SMstore1, !- Name SMstore1, !- Zone or ZoneList Name Type1_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 14.9980, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type !- =========== ALL OBJECTS IN CLASS: LIGHTS =========== Lights, SMstore1_Lights, !- Name SMstore1, !- Zone or ZoneList Name Type1_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 9.584185835, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, SMstore1_Lights_allowance, !- Name SMstore1, !- Zone or ZoneList Name Type1_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 8.568072692, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature ElectricEquipment, SMstore1_MiscPlug_Equip, !- Name SMstore1, !- Zone or ZoneList Name TYPE1_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 749.0308, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory Sizing:Zone, SMstore1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA SMstore1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA SMstore1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.001181026, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} ZoneControl:Thermostat, SMstore1 Thermostat, !- Name SMstore1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore1 DualSPSched; !- Control 1 Name ThermostatSetpoint:DualSetpoint, SMstore1 DualSPSched, !- Name Type1_HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name Type1_CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ZoneHVAC:EquipmentConnections, SMstore1, !- Zone Name SMstore1 Equipment, !- Zone Conditioning Equipment List Name SMstore1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name SMstore1 Air Node, !- Zone Air Node Name SMstore1 Return Air Node Name; !- Zone Return Air Node or NodeList Name NodeList, SMstore1 Inlet Nodes, !- Name SMstore1 Direct Air Inlet Node Name; !- Node 1 Name ZoneHVAC:EquipmentList, SMstore1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type SMstore1 Direct Air, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence AirTerminal:SingleDuct:Uncontrolled, SMstore1 Direct Air, !- Name ALWAYS_ON, !- Availability Schedule Name SMstore1 Direct Air Inlet Node Name, !- Zone Supply Air Node Name AUTOSIZE; !- Maximum Air Flow Rate {m3/s} SetpointManager:SingleZone:Heating, SupAirTemp MngrSMstore1 - Htg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature 48.89, !- Maximum Supply Air Temperature SMstore1, !- Control Zone Name SMstore1 Air Node, !- Zone Node Name SMstore1 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_2:2_Unitary_PackageCoolCoil air inlet; !- Setpoint Node or NodeList Name SetpointManager:SingleZone:Cooling, SupAirTemp MngrSMstore1 - Clg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature 48.89, !- Maximum Supply Air Temperature SMstore1, !- Control Zone Name SMstore1 Air Node, !- Zone Node Name SMstore1 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_2:2 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name Zone, SMstore2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier -9999.0000, !- Ceiling Height {m} 902.6000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area BuildingSurface:Detailed, SMstore2_Floor, !- Name Floor, !- Surface Type SMstore2_Floor_Ffactor, !- Construction Name SMstore2, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 22.8600,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m} 30.4800,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 30.4800,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 22.8600,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore2_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name SMstore2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 22.8600,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m} 22.8600,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 30.4800,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 30.4800,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore2_Wall_1_Window_1,!- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name SMstore2_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 23.470,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m} 23.470,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m} 25.600,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m} 25.600,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore2_Wall_1_Window_2,!- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name SMstore2_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 27.740,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m} 27.740,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m} 29.870,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m} 29.870,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore2_Wall_1_Door, !- Name GlassDoor, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name SMstore2_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 25.760,0.0000,2.1300, !- X,Y,Z ==> Vertex 1 {m} 25.760,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 27.580,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 27.580,0.0000,2.1300; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore2_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name SMstore2, !- Zone Name Surface, !- Outside Boundary Condition SMstore1_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 22.8600,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 22.8600,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 22.8600,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 22.8600,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore2_Roof, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name SMstore2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 30.4800,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 22.8600,22.8600,5.1800, !- X,Y,Z ==> Vertex 2 {m} 22.8600,0.0000,5.1800, !- X,Y,Z ==> Vertex 3 {m} 30.4800,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore2_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name SMstore2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 30.4800,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 30.4800,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 22.8600,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 22.8600,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore2_Wall_3_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name SMstore2_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 27.580,22.8600,2.1300, !- X,Y,Z ==> Vertex 1 {m} 27.580,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 25.760,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 25.760,22.8600,2.1300; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore2_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name SMstore2, !- Zone Name Surface, !- Outside Boundary Condition SMstore3_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 30.4800,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m} 30.4800,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 30.4800,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 30.4800,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m} InternalMass, SMstore2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name SMstore2, !- Zone Name 348.3864; !- Surface Area {m2} !- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION =========== ZoneInfiltration:DesignFlowRate, SMstore2_Infiltration, !- Name SMstore2, !- Zone or ZoneList Name Type2_Infil_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000177458624, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, SMstore2_Door_Infiltration, !- Name SMstore2, !- Zone or ZoneList Name INFIL_Door_Opening_SCH, !- Schedule Name Flow/Zone, !- Design Flow Rate Calculation Method 0.134504895, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} , !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0., !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient People, SMstore2, !- Name SMstore2, !- Zone or ZoneList Name Type2_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 14.9980, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type !- =========== ALL OBJECTS IN CLASS: LIGHTS =========== Lights, SMstore2_Lights, !- Name SMstore2, !- Zone or ZoneList Name Type2_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 9.584185835, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, SMstore2_Lights_allowance, !- Name SMstore2, !- Zone or ZoneList Name Type2_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.953486129, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature ElectricEquipment, SMstore2_MiscPlug_Equip, !- Name SMstore2, !- Zone or ZoneList Name TYPE2_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 749.0308, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory Sizing:Zone, SMstore2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA SMstore2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA SMstore2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.001181026, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} ZoneControl:Thermostat, SMstore2 Thermostat, !- Name SMstore2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore2 DualSPSched; !- Control 1 Name ThermostatSetpoint:DualSetpoint, SMstore2 DualSPSched, !- Name Type2_HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name Type2_CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ZoneHVAC:EquipmentConnections, SMstore2, !- Zone Name SMstore2 Equipment, !- Zone Conditioning Equipment List Name SMstore2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name SMstore2 Air Node, !- Zone Air Node Name SMstore2 Return Air Node Name; !- Zone Return Air Node or NodeList Name NodeList, SMstore2 Inlet Nodes, !- Name SMstore2 Direct Air Inlet Node Name; !- Node 1 Name ZoneHVAC:EquipmentList, SMstore2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type SMstore2 Direct Air, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence AirTerminal:SingleDuct:Uncontrolled, SMstore2 Direct Air, !- Name ALWAYS_ON, !- Availability Schedule Name SMstore2 Direct Air Inlet Node Name, !- Zone Supply Air Node Name AUTOSIZE; !- Maximum Air Flow Rate {m3/s} SetpointManager:SingleZone:Heating, SupAirTemp MngrSMstore2 - Htg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature 48.89, !- Maximum Supply Air Temperature SMstore2, !- Control Zone Name SMstore2 Air Node, !- Zone Node Name SMstore2 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_3:3_Unitary_PackageCoolCoil air inlet; !- Setpoint Node or NodeList Name SetpointManager:SingleZone:Cooling, SupAirTemp MngrSMstore2 - Clg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature 48.89, !- Maximum Supply Air Temperature SMstore2, !- Control Zone Name SMstore2 Air Node, !- Zone Node Name SMstore2 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_3:3 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name Zone, SMstore3, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier -9999.0000, !- Ceiling Height {m} 902.6000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area BuildingSurface:Detailed, SMstore3_Floor, !- Name Floor, !- Surface Type SMstore3_Floor_Ffactor, !- Construction Name SMstore3, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 30.4800,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m} 38.1000,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 38.1000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 30.4800,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore3_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name SMstore3, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 30.4800,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m} 30.4800,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 38.1000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 38.1000,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore3_Wall_1_Window_1,!- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name SMstore3_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 31.090,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m} 31.090,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m} 33.220,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m} 33.220,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore3_Wall_1_Window_2,!- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name SMstore3_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 35.360,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m} 35.360,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m} 37.490,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m} 37.490,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore3_Wall_1_Door, !- Name GlassDoor, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name SMstore3_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 33.380,0.0000,2.1300, !- X,Y,Z ==> Vertex 1 {m} 33.380,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 35.200,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 35.200,0.0000,2.1300; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore3_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name SMstore3, !- Zone Name Surface, !- Outside Boundary Condition SMstore2_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 30.4800,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 30.4800,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 30.4800,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 30.4800,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore3_Roof, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name SMstore3, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 38.1000,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 30.4800,22.8600,5.1800, !- X,Y,Z ==> Vertex 2 {m} 30.4800,0.0000,5.1800, !- X,Y,Z ==> Vertex 3 {m} 38.1000,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore3_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name SMstore3, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 38.1000,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 38.1000,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 30.4800,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 30.4800,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore3_Wall_3_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name SMstore3_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 35.200,22.8600,2.1300, !- X,Y,Z ==> Vertex 1 {m} 35.200,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 33.380,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 33.380,22.8600,2.1300; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore3_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name SMstore3, !- Zone Name Surface, !- Outside Boundary Condition SMstore4_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 38.1000,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m} 38.1000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 38.1000,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 38.1000,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m} InternalMass, SMstore3_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name SMstore3, !- Zone Name 348.3864; !- Surface Area {m2} !- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION =========== ZoneInfiltration:DesignFlowRate, SMstore3_Infiltration, !- Name SMstore3, !- Zone or ZoneList Name Type2_Infil_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000177458624, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, SMstore3_Door_Infiltration, !- Name SMstore3, !- Zone or ZoneList Name INFIL_Door_Opening_SCH, !- Schedule Name Flow/Zone, !- Design Flow Rate Calculation Method 0.134504895, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} , !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0., !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient People, SMstore3, !- Name SMstore3, !- Zone or ZoneList Name Type2_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 14.9980, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type !- =========== ALL OBJECTS IN CLASS: LIGHTS =========== Lights, SMstore3_Lights, !- Name SMstore3, !- Zone or ZoneList Name Type2_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 9.584185835, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, SMstore3_Lights_allowance, !- Name SMstore3, !- Zone or ZoneList Name Type2_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.953486129, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature ElectricEquipment, SMstore3_MiscPlug_Equip, !- Name SMstore3, !- Zone or ZoneList Name TYPE2_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 749.0308, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory Sizing:Zone, SMstore3, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA SMstore3, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA SMstore3, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.001181026, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} ZoneControl:Thermostat, SMstore3 Thermostat, !- Name SMstore3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore3 DualSPSched; !- Control 1 Name ThermostatSetpoint:DualSetpoint, SMstore3 DualSPSched, !- Name Type2_HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name Type2_CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ZoneHVAC:EquipmentConnections, SMstore3, !- Zone Name SMstore3 Equipment, !- Zone Conditioning Equipment List Name SMstore3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name SMstore3 Air Node, !- Zone Air Node Name SMstore3 Return Air Node Name; !- Zone Return Air Node or NodeList Name NodeList, SMstore3 Inlet Nodes, !- Name SMstore3 Direct Air Inlet Node Name; !- Node 1 Name ZoneHVAC:EquipmentList, SMstore3 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type SMstore3 Direct Air, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence AirTerminal:SingleDuct:Uncontrolled, SMstore3 Direct Air, !- Name ALWAYS_ON, !- Availability Schedule Name SMstore3 Direct Air Inlet Node Name, !- Zone Supply Air Node Name AUTOSIZE; !- Maximum Air Flow Rate {m3/s} SetpointManager:SingleZone:Heating, SupAirTemp MngrSMstore3 - Htg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature 48.89, !- Maximum Supply Air Temperature SMstore3, !- Control Zone Name SMstore3 Air Node, !- Zone Node Name SMstore3 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_4:4_Unitary_PackageCoolCoil air inlet; !- Setpoint Node or NodeList Name SetpointManager:SingleZone:Cooling, SupAirTemp MngrSMstore3 - Clg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature 48.89, !- Maximum Supply Air Temperature SMstore3, !- Control Zone Name SMstore3 Air Node, !- Zone Node Name SMstore3 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_4:4 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name Zone, SMstore4, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier -9999.0000, !- Ceiling Height {m} 902.6000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area BuildingSurface:Detailed, SMstore4_Floor, !- Name Floor, !- Surface Type SMstore4_Floor_Ffactor, !- Construction Name SMstore4, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 38.1000,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m} 45.7200,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 45.7200,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 38.1000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore4_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name SMstore4, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 38.1000,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m} 38.1000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 45.7200,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 45.7200,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore4_Wall_1_Window_1,!- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name SMstore4_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 38.710,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m} 38.710,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m} 40.840,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m} 40.840,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore4_Wall_1_Window_2,!- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name SMstore4_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 42.980,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m} 42.980,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m} 45.110,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m} 45.110,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore4_Wall_1_Door, !- Name GlassDoor, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name SMstore4_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 41.000,0.0000,2.1300, !- X,Y,Z ==> Vertex 1 {m} 41.000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 42.820,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 42.820,0.0000,2.1300; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore4_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name SMstore4, !- Zone Name Surface, !- Outside Boundary Condition SMstore3_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 38.1000,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 38.1000,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 38.1000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 38.1000,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore4_Roof, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name SMstore4, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.7200,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 38.1000,22.8600,5.1800, !- X,Y,Z ==> Vertex 2 {m} 38.1000,0.0000,5.1800, !- X,Y,Z ==> Vertex 3 {m} 45.7200,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore4_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name SMstore4, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.7200,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 45.7200,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 38.1000,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 38.1000,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore4_Wall_3_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name SMstore4_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 42.820,22.8600,2.1300, !- X,Y,Z ==> Vertex 1 {m} 42.820,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 41.000,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 41.000,22.8600,2.1300; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore4_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name SMstore4, !- Zone Name Surface, !- Outside Boundary Condition LGstore2_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.7200,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m} 45.7200,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 45.7200,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 45.7200,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m} InternalMass, SMstore4_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name SMstore4, !- Zone Name 348.3864; !- Surface Area {m2} !- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION =========== ZoneInfiltration:DesignFlowRate, SMstore4_Infiltration, !- Name SMstore4, !- Zone or ZoneList Name Type2_Infil_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000177458624, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, SMstore4_Door_Infiltration, !- Name SMstore4, !- Zone or ZoneList Name INFIL_Door_Opening_SCH, !- Schedule Name Flow/Zone, !- Design Flow Rate Calculation Method 0.134504895, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} , !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0., !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient People, SMstore4, !- Name SMstore4, !- Zone or ZoneList Name Type2_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 14.9980, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type !- =========== ALL OBJECTS IN CLASS: LIGHTS =========== Lights, SMstore4_Lights, !- Name SMstore4, !- Zone or ZoneList Name Type2_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 9.584185835, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, SMstore4_Lights_allowance, !- Name SMstore4, !- Zone or ZoneList Name Type2_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.953486129, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature ElectricEquipment, SMstore4_MiscPlug_Equip, !- Name SMstore4, !- Zone or ZoneList Name TYPE2_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 749.0308, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory Sizing:Zone, SMstore4, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA SMstore4, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA SMstore4, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.001181026, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} ZoneControl:Thermostat, SMstore4 Thermostat, !- Name SMstore4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore4 DualSPSched; !- Control 1 Name ThermostatSetpoint:DualSetpoint, SMstore4 DualSPSched, !- Name Type2_HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name Type2_CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ZoneHVAC:EquipmentConnections, SMstore4, !- Zone Name SMstore4 Equipment, !- Zone Conditioning Equipment List Name SMstore4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name SMstore4 Air Node, !- Zone Air Node Name SMstore4 Return Air Node Name; !- Zone Return Air Node or NodeList Name NodeList, SMstore4 Inlet Nodes, !- Name SMstore4 Direct Air Inlet Node Name; !- Node 1 Name ZoneHVAC:EquipmentList, SMstore4 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type SMstore4 Direct Air, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence AirTerminal:SingleDuct:Uncontrolled, SMstore4 Direct Air, !- Name ALWAYS_ON, !- Availability Schedule Name SMstore4 Direct Air Inlet Node Name, !- Zone Supply Air Node Name AUTOSIZE; !- Maximum Air Flow Rate {m3/s} SetpointManager:SingleZone:Heating, SupAirTemp MngrSMstore4 - Htg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature 48.89, !- Maximum Supply Air Temperature SMstore4, !- Control Zone Name SMstore4 Air Node, !- Zone Node Name SMstore4 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_5:5_Unitary_PackageCoolCoil air inlet; !- Setpoint Node or NodeList Name SetpointManager:SingleZone:Cooling, SupAirTemp MngrSMstore4 - Clg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature 48.89, !- Maximum Supply Air Temperature SMstore4, !- Control Zone Name SMstore4 Air Node, !- Zone Node Name SMstore4 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_5:5 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name Zone, LGstore2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier -9999.0000, !- Ceiling Height {m} 1805.2000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area BuildingSurface:Detailed, LGstore2_Floor, !- Name Floor, !- Surface Type LGstore2_Floor_Ffactor, !- Construction Name LGstore2, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.7200,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m} 60.9600,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 60.9600,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 45.7200,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, LGstore2_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name LGstore2, !- Zone Name Surface, !- Outside Boundary Condition SMstore4_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.7200,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 45.7200,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 45.7200,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 45.7200,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, LGstore2_Roof, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name LGstore2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 45.7200,22.8600,5.1800, !- X,Y,Z ==> Vertex 2 {m} 45.7200,0.0000,5.1800, !- X,Y,Z ==> Vertex 3 {m} 60.9600,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, LGstore2_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name LGstore2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 60.9600,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 45.7200,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 45.7200,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, LGstore2_Wall_3_Door_1, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name LGstore2_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 50.440,22.8600,2.1300, !- X,Y,Z ==> Vertex 1 {m} 50.440,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 48.620,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 48.620,22.8600,2.1300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, LGstore2_Wall_3_Door_2, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name LGstore2_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 58.060,22.8600,2.1300, !- X,Y,Z ==> Vertex 1 {m} 58.060,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 56.240,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 56.240,22.8600,2.1300; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, LGstore2_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name LGstore2, !- Zone Name Surface, !- Outside Boundary Condition SMstore5_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m} 60.9600,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 60.9600,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 60.9600,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, LGstore2_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name LGstore2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.7200,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m} 45.7200,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 60.9600,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 60.9600,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, LGstore2_Wall_1_Window_1,!- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name LGstore2_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 46.330,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m} 46.330,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m} 48.460,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m} 48.460,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, LGstore2_Wall_1_Window_2,!- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name LGstore2_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 50.600,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m} 50.600,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m} 52.730,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m} 52.730,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, LGstore2_Wall_1_Window_3,!- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name LGstore2_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 53.950,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m} 53.950,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m} 56.080,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m} 56.080,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, LGstore2_Wall_1_Window_4,!- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name LGstore2_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 58.220,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m} 58.220,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m} 60.350,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m} 60.350,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, LGstore2_Wall_1_Door_1, !- Name GlassDoor, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name LGstore2_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 48.620,0.0000,2.1300, !- X,Y,Z ==> Vertex 1 {m} 48.620,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 50.440,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 50.440,0.0000,2.1300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, LGstore2_Wall_1_Door_2, !- Name GlassDoor, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name LGstore2_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 56.240,0.0000,2.1300, !- X,Y,Z ==> Vertex 1 {m} 56.240,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 58.060,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 58.060,0.0000,2.1300; !- X,Y,Z ==> Vertex 4 {m} InternalMass, LGstore2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name LGstore2, !- Zone Name 696.7728; !- Surface Area {m2} !- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION =========== ZoneInfiltration:DesignFlowRate, LGstore2_Infiltration, !- Name LGstore2, !- Zone or ZoneList Name Type3_Infil_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000177458624, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, LGstore2_Door_Infiltration, !- Name LGstore2, !- Zone or ZoneList Name INFIL_Door_Opening_SCH, !- Schedule Name Flow/Zone, !- Design Flow Rate Calculation Method 0.241164917, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} , !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0., !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient People, LGstore2, !- Name LGstore2, !- Zone or ZoneList Name Type3_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 29.9961, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type !- =========== ALL OBJECTS IN CLASS: LIGHTS =========== Lights, LGstore2_Lights, !- Name LGstore2, !- Zone or ZoneList Name Type3_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 9.584185835, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, LGstore2_Lights_allowance, !- Name LGstore2, !- Zone or ZoneList Name Type3_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature ElectricEquipment, LGstore2_MiscPlug_Equip, !- Name LGstore2, !- Zone or ZoneList Name TYPE3_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1498.0615, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory Sizing:Zone, LGstore2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA LGstore2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA LGstore2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.001181026, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} ZoneControl:Thermostat, LGstore2 Thermostat, !- Name LGstore2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LGstore2 DualSPSched; !- Control 1 Name ThermostatSetpoint:DualSetpoint, LGstore2 DualSPSched, !- Name Type3_HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name Type3_CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ZoneHVAC:EquipmentConnections, LGstore2, !- Zone Name LGstore2 Equipment, !- Zone Conditioning Equipment List Name LGstore2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name LGstore2 Air Node, !- Zone Air Node Name LGstore2 Return Air Node Name; !- Zone Return Air Node or NodeList Name NodeList, LGstore2 Inlet Nodes, !- Name LGstore2 Direct Air Inlet Node Name; !- Node 1 Name ZoneHVAC:EquipmentList, LGstore2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type LGstore2 Direct Air, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence AirTerminal:SingleDuct:Uncontrolled, LGstore2 Direct Air, !- Name ALWAYS_ON, !- Availability Schedule Name LGstore2 Direct Air Inlet Node Name, !- Zone Supply Air Node Name AUTOSIZE; !- Maximum Air Flow Rate {m3/s} SetpointManager:SingleZone:Heating, SupAirTemp MngrLGstore2 - Htg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature 48.89, !- Maximum Supply Air Temperature LGstore2, !- Control Zone Name LGstore2 Air Node, !- Zone Node Name LGstore2 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_6:6_Unitary_PackageCoolCoil air inlet; !- Setpoint Node or NodeList Name SetpointManager:SingleZone:Cooling, SupAirTemp MngrLGstore2 - Clg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature 48.89, !- Maximum Supply Air Temperature LGstore2, !- Control Zone Name LGstore2 Air Node, !- Zone Node Name LGstore2 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_6:6 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name Zone, SMstore5, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier -9999.0000, !- Ceiling Height {m} 902.6000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area BuildingSurface:Detailed, SMstore5_Floor, !- Name Floor, !- Surface Type SMstore5_Floor_Ffactor, !- Construction Name SMstore5, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m} 68.5800,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 68.5800,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 60.9600,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore5_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name SMstore5, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m} 60.9600,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 68.5800,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 68.5800,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore5_Wall_1_Window_1,!- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name SMstore5_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 61.570,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m} 61.570,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m} 63.700,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m} 63.700,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore5_Wall_1_Window_2,!- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name SMstore5_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 65.840,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m} 65.840,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m} 67.970,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m} 67.970,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore5_Wall_1_Door, !- Name GlassDoor, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name SMstore5_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 63.860,0.0000,2.1300, !- X,Y,Z ==> Vertex 1 {m} 63.860,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 65.680,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 65.680,0.0000,2.1300; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore5_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name SMstore5, !- Zone Name Surface, !- Outside Boundary Condition LGstore2_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 60.9600,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 60.9600,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 60.9600,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 60.9600,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore5_Roof, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name SMstore5, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 68.5800,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 60.9600,22.8600,5.1800, !- X,Y,Z ==> Vertex 2 {m} 60.9600,0.0000,5.1800, !- X,Y,Z ==> Vertex 3 {m} 68.5800,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore5_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name SMstore5, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 68.5800,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 68.5800,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 60.9600,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 60.9600,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore5_Wall_3_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name SMstore5_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 65.680,22.8600,2.1300, !- X,Y,Z ==> Vertex 1 {m} 65.680,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 63.860,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 63.860,22.8600,2.1300; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore5_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name SMstore5, !- Zone Name Surface, !- Outside Boundary Condition SMstore6_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 68.5800,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m} 68.5800,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 68.5800,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 68.5800,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m} InternalMass, SMstore5_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name SMstore5, !- Zone Name 348.3864; !- Surface Area {m2} !- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION =========== ZoneInfiltration:DesignFlowRate, SMstore5_Infiltration, !- Name SMstore5, !- Zone or ZoneList Name Type3_Infil_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000177458624, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, SMstore5_Door_Infiltration, !- Name SMstore5, !- Zone or ZoneList Name INFIL_Door_Opening_SCH, !- Schedule Name Flow/Zone, !- Design Flow Rate Calculation Method 0.134504895, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} , !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0., !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient People, SMstore5, !- Name SMstore5, !- Zone or ZoneList Name Type3_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 14.9980, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type !- =========== ALL OBJECTS IN CLASS: LIGHTS =========== Lights, SMstore5_Lights, !- Name SMstore5, !- Zone or ZoneList Name Type3_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 9.584185835, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, SMstore5_Lights_allowance, !- Name SMstore5, !- Zone or ZoneList Name Type3_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 0, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature ElectricEquipment, SMstore5_MiscPlug_Equip, !- Name SMstore5, !- Zone or ZoneList Name TYPE3_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 749.0308, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory Sizing:Zone, SMstore5, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA SMstore5, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA SMstore5, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.001181026, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} ZoneControl:Thermostat, SMstore5 Thermostat, !- Name SMstore5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore5 DualSPSched; !- Control 1 Name ThermostatSetpoint:DualSetpoint, SMstore5 DualSPSched, !- Name Type3_HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name Type3_CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ZoneHVAC:EquipmentConnections, SMstore5, !- Zone Name SMstore5 Equipment, !- Zone Conditioning Equipment List Name SMstore5 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name SMstore5 Air Node, !- Zone Air Node Name SMstore5 Return Air Node Name; !- Zone Return Air Node or NodeList Name NodeList, SMstore5 Inlet Nodes, !- Name SMstore5 Direct Air Inlet Node Name; !- Node 1 Name ZoneHVAC:EquipmentList, SMstore5 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type SMstore5 Direct Air, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence AirTerminal:SingleDuct:Uncontrolled, SMstore5 Direct Air, !- Name ALWAYS_ON, !- Availability Schedule Name SMstore5 Direct Air Inlet Node Name, !- Zone Supply Air Node Name AUTOSIZE; !- Maximum Air Flow Rate {m3/s} SetpointManager:SingleZone:Heating, SupAirTemp MngrSMstore5 - Htg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature 48.89, !- Maximum Supply Air Temperature SMstore5, !- Control Zone Name SMstore5 Air Node, !- Zone Node Name SMstore5 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_7:7_Unitary_PackageCoolCoil air inlet; !- Setpoint Node or NodeList Name SetpointManager:SingleZone:Cooling, SupAirTemp MngrSMstore5 - Clg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature 48.89, !- Maximum Supply Air Temperature SMstore5, !- Control Zone Name SMstore5 Air Node, !- Zone Node Name SMstore5 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_7:7 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name Zone, SMstore6, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier -9999.0000, !- Ceiling Height {m} 902.6000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area BuildingSurface:Detailed, SMstore6_Floor, !- Name Floor, !- Surface Type SMstore6_Floor_Ffactor, !- Construction Name SMstore6, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 68.5800,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m} 76.2000,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 76.2000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 68.5800,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore6_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name SMstore6, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 68.5800,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m} 68.5800,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 76.2000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 76.2000,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore6_Wall_1_Window_1,!- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name SMstore6_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 69.190,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m} 69.190,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m} 71.320,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m} 71.320,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore6_Wall_1_Window_2,!- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name SMstore6_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 73.460,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m} 73.460,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m} 75.590,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m} 75.590,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore6_Wall_1_Door, !- Name GlassDoor, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name SMstore6_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 71.480,0.0000,2.1300, !- X,Y,Z ==> Vertex 1 {m} 71.480,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 73.300,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 73.300,0.0000,2.1300; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore6_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name SMstore6, !- Zone Name Surface, !- Outside Boundary Condition SMstore5_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 68.5800,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 68.5800,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 68.5800,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 68.5800,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore6_Roof, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name SMstore6, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 76.2000,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 68.5800,22.8600,5.1800, !- X,Y,Z ==> Vertex 2 {m} 68.5800,0.0000,5.1800, !- X,Y,Z ==> Vertex 3 {m} 76.2000,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore6_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name SMstore6, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 76.2000,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 76.2000,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 68.5800,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 68.5800,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore6_Wall_3_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name SMstore6_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 73.300,22.8600,2.1300, !- X,Y,Z ==> Vertex 1 {m} 73.300,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 71.480,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 71.480,22.8600,2.1300; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore6_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name SMstore6, !- Zone Name Surface, !- Outside Boundary Condition SMstore7_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 76.2000,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m} 76.2000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 76.2000,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 76.2000,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m} InternalMass, SMstore6_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name SMstore6, !- Zone Name 348.3864; !- Surface Area {m2} !- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION =========== ZoneInfiltration:DesignFlowRate, SMstore6_Infiltration, !- Name SMstore6, !- Zone or ZoneList Name Type3_Infil_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000177458624, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, SMstore6_Door_Infiltration, !- Name SMstore6, !- Zone or ZoneList Name INFIL_Door_Opening_SCH, !- Schedule Name Flow/Zone, !- Design Flow Rate Calculation Method 0.134504895, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} , !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0., !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient People, SMstore6, !- Name SMstore6, !- Zone or ZoneList Name Type3_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 14.9980, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type !- =========== ALL OBJECTS IN CLASS: LIGHTS =========== Lights, SMstore6_Lights, !- Name SMstore6, !- Zone or ZoneList Name Type3_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 9.584185835, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, SMstore6_Lights_allowance, !- Name SMstore6, !- Zone or ZoneList Name Type3_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 0, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature ElectricEquipment, SMstore6_MiscPlug_Equip, !- Name SMstore6, !- Zone or ZoneList Name TYPE3_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 749.0308, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory Sizing:Zone, SMstore6, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA SMstore6, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA SMstore6, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.001181026, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} ZoneControl:Thermostat, SMstore6 Thermostat, !- Name SMstore6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore6 DualSPSched; !- Control 1 Name ThermostatSetpoint:DualSetpoint, SMstore6 DualSPSched, !- Name Type3_HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name Type3_CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ZoneHVAC:EquipmentConnections, SMstore6, !- Zone Name SMstore6 Equipment, !- Zone Conditioning Equipment List Name SMstore6 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name SMstore6 Air Node, !- Zone Air Node Name SMstore6 Return Air Node Name; !- Zone Return Air Node or NodeList Name NodeList, SMstore6 Inlet Nodes, !- Name SMstore6 Direct Air Inlet Node Name; !- Node 1 Name ZoneHVAC:EquipmentList, SMstore6 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type SMstore6 Direct Air, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence AirTerminal:SingleDuct:Uncontrolled, SMstore6 Direct Air, !- Name ALWAYS_ON, !- Availability Schedule Name SMstore6 Direct Air Inlet Node Name, !- Zone Supply Air Node Name AUTOSIZE; !- Maximum Air Flow Rate {m3/s} SetpointManager:SingleZone:Heating, SupAirTemp MngrSMstore6 - Htg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature 48.89, !- Maximum Supply Air Temperature SMstore6, !- Control Zone Name SMstore6 Air Node, !- Zone Node Name SMstore6 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_8:8_Unitary_PackageCoolCoil air inlet; !- Setpoint Node or NodeList Name SetpointManager:SingleZone:Cooling, SupAirTemp MngrSMstore6 - Clg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature 48.89, !- Maximum Supply Air Temperature SMstore6, !- Control Zone Name SMstore6 Air Node, !- Zone Node Name SMstore6 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_8:8 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name Zone, SMstore7, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier -9999.0000, !- Ceiling Height {m} 902.6000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area BuildingSurface:Detailed, SMstore7_Floor, !- Name Floor, !- Surface Type SMstore7_Floor_Ffactor, !- Construction Name SMstore7, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 76.2000,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m} 83.8200,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 83.8200,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 76.2000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore7_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name SMstore7, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 76.2000,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m} 76.2000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 83.8200,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 83.8200,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore7_Wall_1_Window_1,!- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name SMstore7_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 76.810,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m} 76.810,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m} 78.940,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m} 78.940,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore7_Wall_1_Window_2,!- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name SMstore7_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 81.080,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m} 81.080,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m} 83.210,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m} 83.210,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore7_Wall_1_Door, !- Name GlassDoor, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name SMstore7_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 79.100,0.0000,2.1300, !- X,Y,Z ==> Vertex 1 {m} 79.100,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 80.920,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 80.920,0.0000,2.1300; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore7_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name SMstore7, !- Zone Name Surface, !- Outside Boundary Condition SMstore6_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 76.2000,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 76.2000,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 76.2000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 76.2000,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore7_Roof, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name SMstore7, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 83.8200,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 76.2000,22.8600,5.1800, !- X,Y,Z ==> Vertex 2 {m} 76.2000,0.0000,5.1800, !- X,Y,Z ==> Vertex 3 {m} 83.8200,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore7_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name SMstore7, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 83.8200,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 83.8200,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 76.2000,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 76.2000,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore7_Wall_3_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name SMstore7_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 80.920,22.8600,2.1300, !- X,Y,Z ==> Vertex 1 {m} 80.920,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 79.100,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 79.100,22.8600,2.1300; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore7_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name SMstore7, !- Zone Name Surface, !- Outside Boundary Condition SMstore8_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 83.8200,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m} 83.8200,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 83.8200,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 83.8200,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m} InternalMass, SMstore7_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name SMstore7, !- Zone Name 348.3864; !- Surface Area {m2} !- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION =========== ZoneInfiltration:DesignFlowRate, SMstore7_Infiltration, !- Name SMstore7, !- Zone or ZoneList Name Type3_Infil_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000177458624, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, SMstore7_Door_Infiltration, !- Name SMstore7, !- Zone or ZoneList Name INFIL_Door_Opening_SCH, !- Schedule Name Flow/Zone, !- Design Flow Rate Calculation Method 0.134504895, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} , !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0., !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient People, SMstore7, !- Name SMstore7, !- Zone or ZoneList Name Type3_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 14.9980, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type Lights, SMstore7_Lights, !- Name SMstore7, !- Zone or ZoneList Name Type3_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 9.584185835, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, SMstore7_Lights_allowance, !- Name SMstore7, !- Zone or ZoneList Name Type3_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 0, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature ElectricEquipment, SMstore7_MiscPlug_Equip, !- Name SMstore7, !- Zone or ZoneList Name TYPE3_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 749.0308, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory Sizing:Zone, SMstore7, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA SMstore7, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA SMstore7, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.001181026, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} ZoneControl:Thermostat, SMstore7 Thermostat, !- Name SMstore7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore7 DualSPSched; !- Control 1 Name ThermostatSetpoint:DualSetpoint, SMstore7 DualSPSched, !- Name Type3_HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name Type3_CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ZoneHVAC:EquipmentConnections, SMstore7, !- Zone Name SMstore7 Equipment, !- Zone Conditioning Equipment List Name SMstore7 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name SMstore7 Air Node, !- Zone Air Node Name SMstore7 Return Air Node Name; !- Zone Return Air Node or NodeList Name NodeList, SMstore7 Inlet Nodes, !- Name SMstore7 Direct Air Inlet Node Name; !- Node 1 Name ZoneHVAC:EquipmentList, SMstore7 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type SMstore7 Direct Air, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence AirTerminal:SingleDuct:Uncontrolled, SMstore7 Direct Air, !- Name ALWAYS_ON, !- Availability Schedule Name SMstore7 Direct Air Inlet Node Name, !- Zone Supply Air Node Name AUTOSIZE; !- Maximum Air Flow Rate {m3/s} SetpointManager:SingleZone:Heating, SupAirTemp MngrSMstore7 - Htg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature 48.89, !- Maximum Supply Air Temperature SMstore7, !- Control Zone Name SMstore7 Air Node, !- Zone Node Name SMstore7 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_9:9_Unitary_PackageCoolCoil air inlet; !- Setpoint Node or NodeList Name SetpointManager:SingleZone:Cooling, SupAirTemp MngrSMstore7 - Clg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature 48.89, !- Maximum Supply Air Temperature SMstore7, !- Control Zone Name SMstore7 Air Node, !- Zone Node Name SMstore7 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_9:9 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name Zone, SMstore8, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier -9999.0000, !- Ceiling Height {m} 902.6000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area BuildingSurface:Detailed, SMstore8_Floor, !- Name Floor, !- Surface Type SMstore8_Floor_Ffactor, !- Construction Name SMstore8, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 83.8200,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m} 91.4400,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 91.4400,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 83.8200,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore8_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name SMstore8, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 83.8200,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m} 83.8200,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 91.4400,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 91.4400,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore8_Wall_1_Window_1,!- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name SMstore8_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 84.430,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m} 84.430,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m} 86.560,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m} 86.560,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore8_Wall_1_Window_2,!- Name Window, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name SMstore8_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 88.700,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m} 88.700,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m} 90.830,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m} 90.830,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore8_Wall_1_Door, !- Name GlassDoor, !- Surface Type NonresWindow_U_0.34_SHGC_0.38, !- Construction Name SMstore8_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 86.720,0.0000,2.1300, !- X,Y,Z ==> Vertex 1 {m} 86.720,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 88.540,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 88.540,0.0000,2.1300; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore8_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name SMstore8, !- Zone Name Surface, !- Outside Boundary Condition SMstore7_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 83.8200,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 83.8200,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 83.8200,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 83.8200,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore8_Roof, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name SMstore8, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 91.4400,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 83.8200,22.8600,5.1800, !- X,Y,Z ==> Vertex 2 {m} 83.8200,0.0000,5.1800, !- X,Y,Z ==> Vertex 3 {m} 91.4400,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore8_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name SMstore8, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 91.4400,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m} 91.4400,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 83.8200,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 83.8200,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, SMstore8_Wall_3_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name SMstore8_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 88.540,22.8600,2.1300, !- X,Y,Z ==> Vertex 1 {m} 88.540,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m} 86.720,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 86.720,22.8600,2.1300; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, SMstore8_Wall_4, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name SMstore8, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 91.4400,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m} 91.4400,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 91.4400,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m} 91.4400,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m} InternalMass, SMstore8_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name SMstore8, !- Zone Name 348.3864; !- Surface Area {m2} !- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION =========== ZoneInfiltration:DesignFlowRate, SMstore8_Infiltration, !- Name SMstore8, !- Zone or ZoneList Name Type3_Infil_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000302231552, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, SMstore8_Door_Infiltration, !- Name SMstore8, !- Zone or ZoneList Name INFIL_Door_Opening_SCH, !- Schedule Name Flow/Zone, !- Design Flow Rate Calculation Method 0.134504895, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} , !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0., !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient People, SMstore8, !- Name SMstore8, !- Zone or ZoneList Name Type3_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 14.9980, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type !- =========== ALL OBJECTS IN CLASS: LIGHTS =========== Lights, SMstore8_Lights, !- Name SMstore8, !- Zone or ZoneList Name Type3_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 9.584185835, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, SMstore8_Lights_allowance, !- Name SMstore8, !- Zone or ZoneList Name Type3_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 0, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.7000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature ElectricEquipment, SMstore8_MiscPlug_Equip, !- Name SMstore8, !- Zone or ZoneList Name TYPE3_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 749.0308, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory Sizing:Zone, SMstore8, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA SMstore8, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA SMstore8, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.001181026, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} ZoneControl:Thermostat, SMstore8 Thermostat, !- Name SMstore8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore8 DualSPSched; !- Control 1 Name ThermostatSetpoint:DualSetpoint, SMstore8 DualSPSched, !- Name Type3_HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name Type3_CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ZoneHVAC:EquipmentConnections, SMstore8, !- Zone Name SMstore8 Equipment, !- Zone Conditioning Equipment List Name SMstore8 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name SMstore8 Air Node, !- Zone Air Node Name SMstore8 Return Air Node Name; !- Zone Return Air Node or NodeList Name NodeList, SMstore8 Inlet Nodes, !- Name SMstore8 Direct Air Inlet Node Name; !- Node 1 Name ZoneHVAC:EquipmentList, SMstore8 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type SMstore8 Direct Air, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence AirTerminal:SingleDuct:Uncontrolled, SMstore8 Direct Air, !- Name ALWAYS_ON, !- Availability Schedule Name SMstore8 Direct Air Inlet Node Name, !- Zone Supply Air Node Name AUTOSIZE; !- Maximum Air Flow Rate {m3/s} SetpointManager:SingleZone:Heating, SupAirTemp MngrSMstore8 - Htg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature 48.89, !- Maximum Supply Air Temperature SMstore8, !- Control Zone Name SMstore8 Air Node, !- Zone Node Name SMstore8 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_10:10_Unitary_PackageCoolCoil air inlet; !- Setpoint Node or NodeList Name SetpointManager:SingleZone:Cooling, SupAirTemp MngrSMstore8 - Clg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature 48.89, !- Maximum Supply Air Temperature SMstore8, !- Control Zone Name SMstore8 Air Node, !- Zone Node Name SMstore8 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_10:10 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name AirLoopHVAC, PSZ-AC_1:1, !- Name , !- Controller List Name PSZ-AC_1:1 Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} PSZ-AC_1:1 Air Loop Branches, !- Branch List Name , !- Connector List Name PSZ-AC_1:1 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name PSZ-AC_1:1 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name PSZ-AC_1:1 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names PSZ-AC_1:1 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names Sizing:System, PSZ-AC_1:1, !- AirLoop Name Sensible, !- Type of Load to Size On AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} 1.0000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 40, !- Central Heating Design Supply Air Temperature {C} Coincident, !- Sizing Option No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum, !- System Outdoor Air Method 1.0, !- Zone Maximum Outdoor Air Fraction CoolingDesignCapacity, !- Cooling Design Capacity Method autosize, !- Cooling Design Capacity {W} , !- Cooling Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Cooling Design Capacity HeatingDesignCapacity, !- Heating Design Capacity Method autosize, !- Heating Design Capacity {W} , !- Heating Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Heating Design Capacity OnOff; !- Central Cooling Capacity Control Method AvailabilityManagerAssignmentList, PSZ-AC_1:1 Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type PSZ-AC_1:1 Availability Manager; !- Availability Manager 1 Name AvailabilityManager:NightCycle, PSZ-AC_1:1 Availability Manager, !- Name Always_On, !- Applicability Schedule Name Type1_FAN_SCH, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} BranchList, PSZ-AC_1:1 Air Loop Branches, !- Name PSZ-AC_1:1 Air Loop Main Branch; !- Branch 1 Name Branch, PSZ-AC_1:1 Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type PSZ-AC_1:1_OA, !- Component 1 Name PSZ-AC_1:1 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name PSZ-AC_1:1_OA-PSZ-AC_1:1_Unitary_PackageNode, !- Component 1 Outlet Node Name AirLoopHVAC:UnitarySystem, !- Component 2 Object Type PSZ-AC_1:1_Unitary_Package_DX, !- Component 2 Name PSZ-AC_1:1_OA-PSZ-AC_1:1_Unitary_PackageNode, !- Component 2 Inlet Node Name PSZ-AC_1:1 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name AirLoopHVAC:ControllerList, PSZ-AC_1:1_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type PSZ-AC_1:1_OA_Controller;!- Controller 1 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, PSZ-AC_1:1_OA_Equipment, !- Name OutdoorAir:Mixer, !- Component 1 Object Type PSZ-AC_1:1_OAMixing Box; !- Component 1 Name AirLoopHVAC:OutdoorAirSystem, PSZ-AC_1:1_OA, !- Name PSZ-AC_1:1_OA_Controllers, !- Controller List Name PSZ-AC_1:1_OA_Equipment, !- Outdoor Air Equipment List Name PSZ-AC_1:1 Availability Manager List; !- Availability Manager List Name OutdoorAir:NodeList, PSZ-AC_1:1_OANode List; !- Node or NodeList Name 1 NodeList, PSZ-AC_1:1_OANode List, !- Name PSZ-AC_1:1_OAInlet Node; !- Node 1 Name OutdoorAir:Mixer, PSZ-AC_1:1_OAMixing Box, !- Name PSZ-AC_1:1_OA-PSZ-AC_1:1_Unitary_PackageNode, !- Mixed Air Node Name PSZ-AC_1:1_OAInlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name PSZ-AC_1:1_OARelief Node,!- Relief Air Stream Node Name PSZ-AC_1:1 Supply Equipment Inlet Node; !- Return Air Stream Node Name SetpointManager:MixedAir, PSZ-AC_1:1_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable PSZ-AC_1:1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name PSZ-AC_1:1_OA-PSZ-AC_1:1_Unitary_PackageNode, !- Fan Inlet Node Name PSZ-AC_1:1_Unitary_PackageHeatCoil air inlet, !- Fan Outlet Node Name PSZ-AC_1:1_OA-PSZ-AC_1:1_Unitary_PackageNode; !- Setpoint Node or NodeList Name Controller:OutdoorAir, PSZ-AC_1:1_OA_Controller, !- Name PSZ-AC_1:1_OARelief Node, !- Relief Air Outlet Node Name PSZ-AC_1:1 Supply Equipment Inlet Node, !- Return Air Node Name PSZ-AC_1:1_OA-PSZ-AC_1:1_Unitary_PackageNode, !- Mixed Air Node Name PSZ-AC_1:1_OAInlet Node, !- Actuator Node Name AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type 28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C} 64000.0, !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name 0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type FixedMinimum, !- Minimum Limit Type Type1_MinOA_MotorizedDamper_SCH, !- Minimum Outdoor Air Schedule Name , !- Minimum Fraction of Outdoor Air Schedule Name SZ_system_OA_Max_Frac_SCH, !- Maximum Fraction of Outdoor Air Schedule Name , !- Mechanical Ventilation Controller Name , !- Time of Day Economizer Control Schedule Name , !- High Humidity Control , !- Humidistat Control Zone Name , !- High Humidity Outdoor Air Flow Ratio , !- Control High Indoor Humidity Based on Outdoor Humidity Ratio ; !- Heat Recovery Bypass Control Type !- Heat Recovery Bypass Control Type AirLoopHVAC:UnitarySystem, PSZ-AC_1:1_Unitary_Package_DX, !- Name Load, !- Control Type LGstore1, !- Controlling Zone or Thermostat Location None, !- Dehumidification Control Type ALWAYS_ON, !- Availability Schedule Name PSZ-AC_1:1_OA-PSZ-AC_1:1_Unitary_PackageNode, !- Air Inlet Node Name PSZ-AC_1:1 Supply Equipment Outlet Node, !- Air Outlet Node Name Fan:SystemModel, !- Supply Fan Object Type PSZ-AC_1:1_addAQ_Unitary_Package_fan, !- Supply Fan Name BlowThrough, !- Fan Placement Type1_FAN_SCH, !- Supply Air Fan Operating Mode Schedule Name Coil:Heating:Fuel, !- Heating Coil Object Type PSZ-AC_1:1_Unitary_Package_HeatCoil, !- Heating Coil Name 1, !- DX Heating Coil Sizing Ratio Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type PSZ-AC_1:1_Unitary_Package_CoolCoil, !- Cooling Coil Name No, !- Use DOAS DX Cooling Coil 2, !- Minimum Supply Air Temperature {C} SensibleOnlyLoadControl, !- Latent Load Control , !- Supplemental Heating Coil Object Type , !- Supplemental Heating Coil Name SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s} , !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- No Load Fraction of Autosized Cooling Supply Air Flow Rate , !- No Load Fraction of Autosized Heating Supply Air Flow Rate , !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W} , !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W} AUTOSIZE, !- Maximum Supply Air Temperature {C} , !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C} , !- Outdoor Dry-Bulb Temperature Sensor Node Name , !- Maximum Cycling Rate {cycles/hr} , !- Heat Pump Time Constant {s} , !- Fraction of On-Cycle Power Use , !- Heat Pump Fan Delay Time {s} , !- Ancillary On-Cycle Electric Power {W} , !- Ancillary Off-Cycle Electric Power {W} , !- Design Heat Recovery Water Flow Rate {m3/s} , !- Maximum Temperature for Heat Recovery {C} , !- Heat Recovery Water Inlet Node Name , !- Heat Recovery Water Outlet Node Name UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type PSZ-AC_1:1_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name UnitarySystemPerformance:Multispeed, PSZ-AC_1:1_Unitary_Package_DX_Perf, !- Name 2, !- Number of Speeds for Heating 2, !- Number of Speeds for Cooling No, !- Single Mode Operation 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 1 Supply Air Flow Ratio 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 2 Supply Air Flow Ratio 1; !- Cooling Speed 2 Supply Air Flow Ratio Fan:SystemModel, PSZ-AC_1:1_addAQ_Unitary_Package_fan, !- Name Type1_FAN_SCH, !- Availability Schedule Name PSZ-AC_1:1_OA-PSZ-AC_1:1_Unitary_PackageNode, !- Air Inlet Node Name PSZ-AC_1:1_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name AUTOSIZE, !- Design Maximum Air Flow Rate Discrete, !- Speed Control Method 1, !- Electric Power Minimum Flow Rate Fraction 622.5, !- Design Pressure Rise {Pa} 0.895, !- Motor Efficiency 1.0, ! Motor In Air Stream Fraction AUTOSIZE, !- Design Electric Power Consumption TotalEfficiencyAndPressure, !- Design Power Sizing Method , !- Electric Power Per Unit Flow Rate , !- Electric Power Per Unit Flow Rate Per Pressure 0.58175, !- Fan Total Efficiency , !- Electric Power Function of Flow Fraction Curve Name 622.5, !- Night Ventilation Mode Pressure Rise 1.0, !- Night Ventilation Mode Flow Fraction , !- Motor Loss Zone Name , !- Motor Loss Radiative Fraction General, !- End-Use Subcategory 2, !- Number of Speeds 0.66, !- Speed Flow Fraction 0.4, !- Electric Power Fraction 1, !- Speed Flow Fraction 1; !- Electric Power Fraction Coil:Heating:Fuel, PSZ-AC_1:1_Unitary_Package_HeatCoil, !- Name ALWAYS_ON, !- Availability Schedule Name NaturalGas, !- Fuel Type 0.81, !- Burner Efficiency AUTOSIZE, !- Nominal Capacity {W} PSZ-AC_1:1_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name PSZ-AC_1:1_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Cooling:DX:MultiSpeed, PSZ-AC_1:1_Unitary_Package_CoolCoil, !- Name ALWAYS_ON, !- Availability Schedule Name PSZ-AC_1:1_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name PSZ-AC_1:1 Supply Equipment Outlet Node, !- Air Outlet Node Name , !- Condenser Air Inlet Node Name AirCooled, !- Condenser Type , !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} , !- Supply Water Storage Tank Name , !- Condensate Collection Water Storage Tank Name No, !- Apply Part Load Fraction to Speeds Greater than 1 No, !- Apply Latent Degradation to Speeds Greater than 1 , !- Crankcase Heater Capacity {W} 10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C} , !- Basin Heater Capacity {W/K} 2, !- Basin Heater Setpoint Temperature {C} , !- Basin Heater Operating Schedule Name Electricity, !- Fuel Type 2, !- Number of Speeds 18857.83, !- Speed 1 Gross Rated Total Cooling Capacity {W} 0.68914, !- Speed 1 Gross Rated Sensible Heat Ratio 3.7988306741603, !- Speed 1 Gross Rated Cooling COP {W/W} 1.06646666666667, !- Speed 1 Rated Air Flow Rate {m3/s} 0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 1 Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolFFF, !- Speed 1 Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 1 Energy Input Ratio Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 1 Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolPLR, !- Speed 1 Part Load Fraction Correlation Curve Name , !- Speed 1 Nominal Time for Condensate Removal to Begin {s} , !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless} , !- Speed 1 Maximum Cycling Rate {cycles/hr} , !- Speed 1 Latent Capacity Time Constant {s} 0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 1 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s} , !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W} 37715.66, !- Speed 2 Gross Rated Total Cooling Capacity {W} 0.68914, !- Speed 2 Gross Rated Sensible Heat Ratio 3.7988306741603, !- Speed 2 Gross Rated Cooling COP {W/W} 1.59970, !- Speed 2 Rated Air Flow Rate {m3/s} 0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 2 Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolFFF, !- Speed 2 Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 2 Energy Input Ratio Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 2 Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolPLR, !- Speed 2 Part Load Fraction Correlation Curve Name , !- Speed 2 Nominal Time for Condensate Removal to Begin {s} , !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless} , !- Speed 2 Maximum Cycling Rate {cycles/hr} , !- Speed 2 Latent Capacity Time Constant {s} 0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 2 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s} ; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W} Curve:Biquadratic, PSZ-AC_Unitary_PackagecoolCapFT, !- Name 0.766956, !- Coefficient1 Constant 0.0107756, !- Coefficient2 x -0.0000414703, !- Coefficient3 x**2 0.00134961, !- Coefficient4 y -0.000261144, !- Coefficient5 y**2 0.000457488, !- Coefficient6 x*y 12.77778, !- Minimum Value of x 23.88889, !- Maximum Value of x 21.11111, !- Minimum Value of y 46.11111; !- Maximum Value of y Curve:Biquadratic, PSZ-AC_Unitary_PackagecoolEIRFT, !- Name 0.297145, !- Coefficient1 Constant 0.0430933, !- Coefficient2 x -0.000748766, !- Coefficient3 x**2 0.00597727, !- Coefficient4 y 0.000482112, !- Coefficient5 y**2 -0.000956448, !- Coefficient6 x*y 12.77778, !- Minimum Value of x 23.88889, !- Maximum Value of x 21.11111, !- Minimum Value of y 46.11111; !- Maximum Value of y Curve:Quadratic, PSZ-AC_Unitary_PackagecoolFFF, !- Name 0.8, !- Coefficient1 Constant 0.2, !- Coefficient2 x 0.0, !- Coefficient3 x**2 0.5, !- Minimum Value of x 1.5; !- Maximum Value of x Curve:Quadratic, PSZ-AC_Unitary_PackagecoolEIRFFF, !- Name 1.156, !- Coefficient1 Constant -0.1816, !- Coefficient2 x 0.0256, !- Coefficient3 x**2 0.5, !- Minimum Value of x 1.5; !- Maximum Value of x Curve:Quadratic, PSZ-AC_Unitary_PackagecoolPLR, !- Name 0.75, !- Coefficient1 Constant 0.25, !- Coefficient2 x 0.0, !- Coefficient3 x**2 0.0, !- Minimum Value of x 1.0; !- Maximum Value of x AirLoopHVAC:SupplyPath, PSZ-AC_1:1, !- Name PSZ-AC_1:1 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type PSZ-AC_1:1 Supply Air Splitter; !- Component 1 Name AirLoopHVAC:ZoneSplitter, PSZ-AC_1:1 Supply Air Splitter, !- Name PSZ-AC_1:1 Zone Equipment Inlet Node, !- Inlet Node Name LGstore1 Direct Air Inlet Node Name; !- Outlet 1 Node Name AirLoopHVAC:ReturnPath, PSZ-AC_1:1 Return Air Path, !- Name PSZ-AC_1:1 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type PSZ-AC_1:1 Return Air Mixer; !- Component 1 Name AirLoopHVAC:ZoneMixer, PSZ-AC_1:1 Return Air Mixer, !- Name PSZ-AC_1:1 Zone Equipment Outlet Node, !- Outlet Node Name LGstore1 Return Air Node Name; !- Inlet 1 Node Name AirLoopHVAC, PSZ-AC_2:2, !- Name , !- Controller List Name PSZ-AC_2:2 Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} PSZ-AC_2:2 Air Loop Branches, !- Branch List Name , !- Connector List Name PSZ-AC_2:2 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name PSZ-AC_2:2 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name PSZ-AC_2:2 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names PSZ-AC_2:2 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names Sizing:System, PSZ-AC_2:2, !- AirLoop Name Sensible, !- Type of Load to Size On AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} 1.0000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 40.0, !- Central Heating Design Supply Air Temperature {C} Coincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum, !- System Outdoor Air Method 1.0, !- Zone Maximum Outdoor Air Fraction CoolingDesignCapacity, !- Cooling Design Capacity Method autosize, !- Cooling Design Capacity {W} , !- Cooling Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Cooling Design Capacity HeatingDesignCapacity, !- Heating Design Capacity Method autosize, !- Heating Design Capacity {W} , !- Heating Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Heating Design Capacity OnOff; !- Central Cooling Capacity Control Method AvailabilityManagerAssignmentList, PSZ-AC_2:2 Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type PSZ-AC_2:2 Availability Manager; !- Availability Manager 1 Name AvailabilityManager:NightCycle, PSZ-AC_2:2 Availability Manager, !- Name Always_On, !- Applicability Schedule Name Type1_FAN_SCH, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} BranchList, PSZ-AC_2:2 Air Loop Branches, !- Name PSZ-AC_2:2 Air Loop Main Branch; !- Branch 1 Name Branch, PSZ-AC_2:2 Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type PSZ-AC_2:2_OA, !- Component 1 Name PSZ-AC_2:2 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name PSZ-AC_2:2_OA-PSZ-AC_2:2_Unitary_PackageNode, !- Component 1 Outlet Node Name AirLoopHVAC:UnitarySystem, !- Component 2 Object Type PSZ-AC_2:2_Unitary_Package_DX, !- Component 2 Name PSZ-AC_2:2_OA-PSZ-AC_2:2_Unitary_PackageNode, !- Component 2 Inlet Node Name PSZ-AC_2:2 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name AirLoopHVAC:ControllerList, PSZ-AC_2:2_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type PSZ-AC_2:2_OA_Controller;!- Controller 1 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, PSZ-AC_2:2_OA_Equipment, !- Name OutdoorAir:Mixer, !- Component 1 Object Type PSZ-AC_2:2_OAMixing Box; !- Component 1 Name AirLoopHVAC:OutdoorAirSystem, PSZ-AC_2:2_OA, !- Name PSZ-AC_2:2_OA_Controllers, !- Controller List Name PSZ-AC_2:2_OA_Equipment, !- Outdoor Air Equipment List Name PSZ-AC_2:2 Availability Manager List; !- Availability Manager List Name OutdoorAir:NodeList, PSZ-AC_2:2_OANode List; !- Node or NodeList Name 1 NodeList, PSZ-AC_2:2_OANode List, !- Name PSZ-AC_2:2_OAInlet Node; !- Node 1 Name OutdoorAir:Mixer, PSZ-AC_2:2_OAMixing Box, !- Name PSZ-AC_2:2_OA-PSZ-AC_2:2_Unitary_PackageNode, !- Mixed Air Node Name PSZ-AC_2:2_OAInlet Node, !- Outdoor Air Stream Node Name PSZ-AC_2:2_OARelief Node,!- Relief Air Stream Node Name PSZ-AC_2:2 Supply Equipment Inlet Node; !- Return Air Stream Node Name SetpointManager:MixedAir, PSZ-AC_2:2_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable PSZ-AC_2:2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name PSZ-AC_2:2_OA-PSZ-AC_2:2_Unitary_PackageNode, !- Fan Inlet Node Name PSZ-AC_2:2_Unitary_PackageHeatCoil air inlet, !- Fan Outlet Node Name PSZ-AC_2:2_OA-PSZ-AC_2:2_Unitary_PackageNode; !- Setpoint Node or NodeList Name Controller:OutdoorAir, PSZ-AC_2:2_OA_Controller,!- Name PSZ-AC_2:2_OARelief Node,!- Relief Air Outlet Node Name PSZ-AC_2:2 Supply Equipment Inlet Node, !- Return Air Node Name PSZ-AC_2:2_OA-PSZ-AC_2:2_Unitary_PackageNode, !- Mixed Air Node Name PSZ-AC_2:2_OAInlet Node, !- Actuator Node Name AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type 28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C} 64000.0, !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name 0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type FixedMinimum, !- Minimum Limit Type Type1_MinOA_MotorizedDamper_SCH, !- Minimum Outdoor Air Schedule Name , !- Minimum Fraction of Outdoor Air Schedule Name SZ_system_OA_Max_Frac_SCH; !- Maximum Fraction of Outdoor Air Schedule Name AirLoopHVAC:UnitarySystem, PSZ-AC_2:2_Unitary_Package_DX, !- Name Load, !- Control Type SMstore1, !- Controlling Zone or Thermostat Location None, !- Dehumidification Control Type ALWAYS_ON, !- Availability Schedule Name PSZ-AC_2:2_OA-PSZ-AC_2:2_Unitary_PackageNode, !- Air Inlet Node Name PSZ-AC_2:2 Supply Equipment Outlet Node, !- Air Outlet Node Name Fan:SystemModel, !- Supply Fan Object Type PSZ-AC_2:2_addAQ_Unitary_Package_fan, !- Supply Fan Name BlowThrough, !- Fan Placement Type2_FAN_SCH, !- Supply Air Fan Operating Mode Schedule Name Coil:Heating:Fuel, !- Heating Coil Object Type PSZ-AC_2:2_Unitary_Package_HeatCoil, !- Heating Coil Name 1, !- DX Heating Coil Sizing Ratio Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type PSZ-AC_2:2_Unitary_Package_CoolCoil, !- Cooling Coil Name No, !- Use DOAS DX Cooling Coil 2, !- Minimum Supply Air Temperature {C} SensibleOnlyLoadControl, !- Latent Load Control , !- Supplemental Heating Coil Object Type , !- Supplemental Heating Coil Name SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s} , !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- No Load Fraction of Autosized Cooling Supply Air Flow Rate , !- No Load Fraction of Autosized Heating Supply Air Flow Rate , !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W} , !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W} AUTOSIZE, !- Maximum Supply Air Temperature {C} , !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C} , !- Outdoor Dry-Bulb Temperature Sensor Node Name , !- Maximum Cycling Rate {cycles/hr} , !- Heat Pump Time Constant {s} , !- Fraction of On-Cycle Power Use , !- Heat Pump Fan Delay Time {s} , !- Ancillary On-Cycle Electric Power {W} , !- Ancillary Off-Cycle Electric Power {W} , !- Design Heat Recovery Water Flow Rate {m3/s} , !- Maximum Temperature for Heat Recovery {C} , !- Heat Recovery Water Inlet Node Name , !- Heat Recovery Water Outlet Node Name UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type PSZ-AC_2:2_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name UnitarySystemPerformance:Multispeed, PSZ-AC_2:2_Unitary_Package_DX_Perf, !- Name 2, !- Number of Speeds for Heating 2, !- Number of Speeds for Cooling No, !- Single Mode Operation 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 1 Supply Air Flow Ratio 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 2 Supply Air Flow Ratio 1; !- Cooling Speed 2 Supply Air Flow Ratio Fan:SystemModel, PSZ-AC_2:2_addAQ_Unitary_Package_fan, !- Name Type1_FAN_SCH, !- Availability Schedule Name PSZ-AC_2:2_OA-PSZ-AC_2:2_Unitary_PackageNode, !- Air Inlet Node Name PSZ-AC_2:2_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name AUTOSIZE, !- Design Maximum Air Flow Rate Discrete, !- Speed Control Method 1, !- Electric Power Minimum Flow Rate Fraction 622.5, !- Design Pressure Rise {Pa} 0.865, !- Motor Efficiency 1.0, ! Motor In Air Stream Fraction AUTOSIZE, !- Design Electric Power Consumption TotalEfficiencyAndPressure, !- Design Power Sizing Method , !- Electric Power Per Unit Flow Rate , !- Electric Power Per Unit Flow Rate Per Pressure 0.56225, !- Fan Total Efficiency , !- Electric Power Function of Flow Fraction Curve Name 622.5, !- Night Ventilation Mode Pressure Rise , !- Night Ventilation Mode Flow Fraction , !- Motor Loss Zone Name , !- Motor Loss Radiative Fraction General, !- End-Use Subcategory 2, !- Number of Speeds 0.66, !- Speed Flow Fraction 0.4, !- Electric Power Fraction 1, !- Speed Flow Fraction 1; !- Electric Power Fraction Coil:Heating:Fuel, PSZ-AC_2:2_Unitary_Package_HeatCoil, !- Name ALWAYS_ON, !- Availability Schedule Name NaturalGas, !- Fuel Type 0.81, !- Burner Efficiency AUTOSIZE, !- Nominal Capacity {W} PSZ-AC_2:2_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name PSZ-AC_2:2_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Cooling:DX:MultiSpeed, PSZ-AC_2:2_Unitary_Package_CoolCoil, !- Name ALWAYS_ON, !- Availability Schedule Name PSZ-AC_2:2_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name PSZ-AC_2:2 Supply Equipment Outlet Node, !- Air Outlet Node Name , !- Condenser Air Inlet Node Name AirCooled, !- Condenser Type , !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} , !- Supply Water Storage Tank Name , !- Condensate Collection Water Storage Tank Name No, !- Apply Part Load Fraction to Speeds Greater than 1 No, !- Apply Latent Degradation to Speeds Greater than 1 , !- Crankcase Heater Capacity {W} 10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C} , !- Basin Heater Capacity {W/K} 2, !- Basin Heater Setpoint Temperature {C} , !- Basin Heater Operating Schedule Name Electricity, !- Fuel Type 2, !- Number of Speeds 10320.04, !- Speed 1 Gross Rated Total Cooling Capacity {W} 0.69656, !- Speed 1 Gross Rated Sensible Heat Ratio 3.7988306741603, !- Speed 1 Gross Rated Cooling COP {W/W} 0.60042, !- Speed 1 Rated Air Flow Rate {m3/s} 0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 1 Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolFFF, !- Speed 1 Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 1 Energy Input Ratio Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 1 Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolPLR, !- Speed 1 Part Load Fraction Correlation Curve Name , !- Speed 1 Nominal Time for Condensate Removal to Begin {s} , !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless} , !- Speed 1 Maximum Cycling Rate {cycles/hr} , !- Speed 1 Latent Capacity Time Constant {s} 0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 1 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s} , !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W} 20640.08, !- Speed 2 Gross Rated Total Cooling Capacity {W} 0.69656, !- Speed 2 Gross Rated Sensible Heat Ratio 3.7988306741603, !- Speed 2 Gross Rated Cooling COP {W/W} 0.90063, !- Speed 2 Rated Air Flow Rate {m3/s} 0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 2 Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolFFF, !- Speed 2 Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 2 Energy Input Ratio Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 2 Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolPLR, !- Speed 2 Part Load Fraction Correlation Curve Name , !- Speed 2 Nominal Time for Condensate Removal to Begin {s} , !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless} , !- Speed 2 Maximum Cycling Rate {cycles/hr} , !- Speed 2 Latent Capacity Time Constant {s} 0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 2 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s} ; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W} AirLoopHVAC:SupplyPath, PSZ-AC_2:2, !- Name PSZ-AC_2:2 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type PSZ-AC_2:2 Supply Air Splitter; !- Component 1 Name AirLoopHVAC:ZoneSplitter, PSZ-AC_2:2 Supply Air Splitter, !- Name PSZ-AC_2:2 Zone Equipment Inlet Node, !- Inlet Node Name SMstore1 Direct Air Inlet Node Name; !- Outlet 1 Node Name AirLoopHVAC:ReturnPath, PSZ-AC_2:2 Return Air Path, !- Name PSZ-AC_2:2 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type PSZ-AC_2:2 Return Air Mixer; !- Component 1 Name AirLoopHVAC:ZoneMixer, PSZ-AC_2:2 Return Air Mixer, !- Name PSZ-AC_2:2 Zone Equipment Outlet Node, !- Outlet Node Name SMstore1 Return Air Node Name; !- Inlet 1 Node Name AirLoopHVAC, PSZ-AC_3:3, !- Name , !- Controller List Name PSZ-AC_3:3 Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} PSZ-AC_3:3 Air Loop Branches, !- Branch List Name , !- Connector List Name PSZ-AC_3:3 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name PSZ-AC_3:3 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name PSZ-AC_3:3 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names PSZ-AC_3:3 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names Sizing:System, PSZ-AC_3:3, !- AirLoop Name Sensible, !- Type of Load to Size On AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} 1.0000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 40.0, !- Central Heating Design Supply Air Temperature {C} Coincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum, !- System Outdoor Air Method 1.0, !- Zone Maximum Outdoor Air Fraction CoolingDesignCapacity, !- Cooling Design Capacity Method autosize, !- Cooling Design Capacity {W} , !- Cooling Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Cooling Design Capacity HeatingDesignCapacity, !- Heating Design Capacity Method autosize, !- Heating Design Capacity {W} , !- Heating Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Heating Design Capacity OnOff; !- Central Cooling Capacity Control Method AvailabilityManagerAssignmentList, PSZ-AC_3:3 Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type PSZ-AC_3:3 Availability Manager; !- Availability Manager 1 Name AvailabilityManager:NightCycle, PSZ-AC_3:3 Availability Manager, !- Name Always_On, !- Applicability Schedule Name Type2_FAN_SCH, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} BranchList, PSZ-AC_3:3 Air Loop Branches, !- Name PSZ-AC_3:3 Air Loop Main Branch; !- Branch 1 Name Branch, PSZ-AC_3:3 Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type PSZ-AC_3:3_OA, !- Component 1 Name PSZ-AC_3:3 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name PSZ-AC_3:3_OA-PSZ-AC_3:3_Unitary_PackageNode, !- Component 1 Outlet Node Name AirLoopHVAC:UnitarySystem, !- Component 2 Object Type PSZ-AC_3:3_Unitary_Package_DX, !- Component 2 Name PSZ-AC_3:3_OA-PSZ-AC_3:3_Unitary_PackageNode, !- Component 2 Inlet Node Name PSZ-AC_3:3 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name AirLoopHVAC:ControllerList, PSZ-AC_3:3_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type PSZ-AC_3:3_OA_Controller;!- Controller 1 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, PSZ-AC_3:3_OA_Equipment, !- Name OutdoorAir:Mixer, !- Component 1 Object Type PSZ-AC_3:3_OAMixing Box; !- Component 1 Name AirLoopHVAC:OutdoorAirSystem, PSZ-AC_3:3_OA, !- Name PSZ-AC_3:3_OA_Controllers, !- Controller List Name PSZ-AC_3:3_OA_Equipment, !- Outdoor Air Equipment List Name PSZ-AC_3:3 Availability Manager List; !- Availability Manager List Name OutdoorAir:NodeList, PSZ-AC_3:3_OANode List; !- Node or NodeList Name 1 NodeList, PSZ-AC_3:3_OANode List, !- Name PSZ-AC_3:3_OAInlet Node; !- Node 1 Name OutdoorAir:Mixer, PSZ-AC_3:3_OAMixing Box, !- Name PSZ-AC_3:3_OA-PSZ-AC_3:3_Unitary_PackageNode, !- Mixed Air Node Name PSZ-AC_3:3_OAInlet Node, !- Outdoor Air Stream Node Name PSZ-AC_3:3_OARelief Node,!- Relief Air Stream Node Name PSZ-AC_3:3 Supply Equipment Inlet Node; !- Return Air Stream Node Name SetpointManager:MixedAir, PSZ-AC_3:3_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable PSZ-AC_3:3 Supply Equipment Outlet Node, !- Reference Setpoint Node Name PSZ-AC_3:3_OA-PSZ-AC_3:3_Unitary_PackageNode, !- Fan Inlet Node Name PSZ-AC_3:3_Unitary_PackageHeatCoil air inlet, !- Fan Outlet Node Name PSZ-AC_3:3_OA-PSZ-AC_3:3_Unitary_PackageNode; !- Setpoint Node or NodeList Name Controller:OutdoorAir, PSZ-AC_3:3_OA_Controller,!- Name PSZ-AC_3:3_OARelief Node,!- Relief Air Outlet Node Name PSZ-AC_3:3 Supply Equipment Inlet Node, !- Return Air Node Name PSZ-AC_3:3_OA-PSZ-AC_3:3_Unitary_PackageNode, !- Mixed Air Node Name PSZ-AC_3:3_OAInlet Node, !- Actuator Node Name AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type 28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C} 64000.0, !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name 0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type FixedMinimum, !- Minimum Limit Type Type2_MinOA_MotorizedDamper_SCH, !- Minimum Outdoor Air Schedule Name , !- Minimum Fraction of Outdoor Air Schedule Name SZ_system_OA_Max_Frac_SCH; !- Maximum Fraction of Outdoor Air Schedule Name AirLoopHVAC:UnitarySystem, PSZ-AC_3:3_Unitary_Package_DX, !- Name Load, !- Control Type SMstore2, !- Controlling Zone or Thermostat Location None, !- Dehumidification Control Type ALWAYS_ON, !- Availability Schedule Name PSZ-AC_3:3_OA-PSZ-AC_3:3_Unitary_PackageNode, !- Air Inlet Node Name PSZ-AC_3:3 Supply Equipment Outlet Node, !- Air Outlet Node Name Fan:SystemModel, !- Supply Fan Object Type PSZ-AC_3:3_addAQ_Unitary_Package_fan, !- Supply Fan Name BlowThrough, !- Fan Placement Type2_FAN_SCH, !- Supply Air Fan Operating Mode Schedule Name Coil:Heating:Fuel, !- Heating Coil Object Type PSZ-AC_3:3_Unitary_Package_HeatCoil, !- Heating Coil Name 1, !- DX Heating Coil Sizing Ratio Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type PSZ-AC_3:3_Unitary_Package_CoolCoil, !- Cooling Coil Name No, !- Use DOAS DX Cooling Coil 2, !- Minimum Supply Air Temperature {C} SensibleOnlyLoadControl, !- Latent Load Control , !- Supplemental Heating Coil Object Type , !- Supplemental Heating Coil Name SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s} , !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- No Load Fraction of Autosized Cooling Supply Air Flow Rate , !- No Load Fraction of Autosized Heating Supply Air Flow Rate , !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W} , !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W} AUTOSIZE, !- Maximum Supply Air Temperature {C} , !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C} , !- Outdoor Dry-Bulb Temperature Sensor Node Name , !- Maximum Cycling Rate {cycles/hr} , !- Heat Pump Time Constant {s} , !- Fraction of On-Cycle Power Use , !- Heat Pump Fan Delay Time {s} , !- Ancillary On-Cycle Electric Power {W} , !- Ancillary Off-Cycle Electric Power {W} , !- Design Heat Recovery Water Flow Rate {m3/s} , !- Maximum Temperature for Heat Recovery {C} , !- Heat Recovery Water Inlet Node Name , !- Heat Recovery Water Outlet Node Name UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type PSZ-AC_3:3_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name UnitarySystemPerformance:Multispeed, PSZ-AC_3:3_Unitary_Package_DX_Perf, !- Name 2, !- Number of Speeds for Heating 2, !- Number of Speeds for Cooling No, !- Single Mode Operation 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 1 Supply Air Flow Ratio 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 2 Supply Air Flow Ratio 1; !- Cooling Speed 2 Supply Air Flow Ratio Fan:SystemModel, PSZ-AC_3:3_addAQ_Unitary_Package_fan, !- Name Type2_FAN_SCH, !- Availability Schedule Name PSZ-AC_3:3_OA-PSZ-AC_3:3_Unitary_PackageNode, !- Air Inlet Node Name PSZ-AC_3:3_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name AUTOSIZE, !- Design Maximum Air Flow Rate Discrete, !- Speed Control Method 1, !- Electric Power Minimum Flow Rate Fraction 622.5, !- Design Pressure Rise {Pa} 0.865, !- Motor Efficiency 1.0, ! Motor In Air Stream Fraction AUTOSIZE, !- Design Electric Power Consumption TotalEfficiencyAndPressure, !- Design Power Sizing Method , !- Electric Power Per Unit Flow Rate , !- Electric Power Per Unit Flow Rate Per Pressure 0.56225, !- Fan Total Efficiency , !- Electric Power Function of Flow Fraction Curve Name 622.5, !- Night Ventilation Mode Pressure Rise , !- Night Ventilation Mode Flow Fraction , !- Motor Loss Zone Name , !- Motor Loss Radiative Fraction General, !- End-Use Subcategory 2, !- Number of Speeds 0.66, !- Speed Flow Fraction 0.4, !- Electric Power Fraction 1, !- Speed Flow Fraction 1; !- Electric Power Fraction Coil:Heating:Fuel, PSZ-AC_3:3_Unitary_Package_HeatCoil, !- Name ALWAYS_ON, !- Availability Schedule Name NaturalGas, !- Fuel Type 0.81, !- Burner Efficiency AUTOSIZE, !- Nominal Capacity {W} PSZ-AC_3:3_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name PSZ-AC_3:3_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Cooling:DX:MultiSpeed, PSZ-AC_3:3_Unitary_Package_CoolCoil, !- Name ALWAYS_ON, !- Availability Schedule Name PSZ-AC_3:3_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name PSZ-AC_3:3 Supply Equipment Outlet Node, !- Air Outlet Node Name , !- Condenser Air Inlet Node Name AirCooled, !- Condenser Type , !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} , !- Supply Water Storage Tank Name , !- Condensate Collection Water Storage Tank Name No, !- Apply Part Load Fraction to Speeds Greater than 1 No, !- Apply Latent Degradation to Speeds Greater than 1 , !- Crankcase Heater Capacity {W} 10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C} , !- Basin Heater Capacity {W/K} 2, !- Basin Heater Setpoint Temperature {C} , !- Basin Heater Operating Schedule Name Electricity, !- Fuel Type 2, !- Number of Speeds 10292.23, !- Speed 1 Gross Rated Total Cooling Capacity {W} 0.73646, !- Speed 1 Gross Rated Sensible Heat Ratio 3.7988306741603, !- Speed 1 Gross Rated Cooling COP {W/W} 0.688773333333333, !- Speed 1 Rated Air Flow Rate {m3/s} 0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 1 Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolFFF, !- Speed 1 Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 1 Energy Input Ratio Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 1 Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolPLR, !- Speed 1 Part Load Fraction Correlation Curve Name , !- Speed 1 Nominal Time for Condensate Removal to Begin {s} , !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless} , !- Speed 1 Maximum Cycling Rate {cycles/hr} , !- Speed 1 Latent Capacity Time Constant {s} 0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 1 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s} , !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W} 20584.46, !- Speed 2 Gross Rated Total Cooling Capacity {W} 0.73646, !- Speed 2 Gross Rated Sensible Heat Ratio 3.7988306741603, !- Speed 2 Gross Rated Cooling COP {W/W} 1.03316, !- Speed 2 Rated Air Flow Rate {m3/s} 0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 2 Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolFFF, !- Speed 2 Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 2 Energy Input Ratio Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 2 Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolPLR, !- Speed 2 Part Load Fraction Correlation Curve Name , !- Speed 2 Nominal Time for Condensate Removal to Begin {s} , !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless} , !- Speed 2 Maximum Cycling Rate {cycles/hr} , !- Speed 2 Latent Capacity Time Constant {s} 0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 2 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s} ; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W} AirLoopHVAC:SupplyPath, PSZ-AC_3:3, !- Name PSZ-AC_3:3 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type PSZ-AC_3:3 Supply Air Splitter; !- Component 1 Name AirLoopHVAC:ZoneSplitter, PSZ-AC_3:3 Supply Air Splitter, !- Name PSZ-AC_3:3 Zone Equipment Inlet Node, !- Inlet Node Name SMstore2 Direct Air Inlet Node Name; !- Outlet 1 Node Name AirLoopHVAC:ReturnPath, PSZ-AC_3:3 Return Air Path, !- Name PSZ-AC_3:3 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type PSZ-AC_3:3 Return Air Mixer; !- Component 1 Name AirLoopHVAC:ZoneMixer, PSZ-AC_3:3 Return Air Mixer, !- Name PSZ-AC_3:3 Zone Equipment Outlet Node, !- Outlet Node Name SMstore2 Return Air Node Name; !- Inlet 1 Node Name AirLoopHVAC, PSZ-AC_4:4, !- Name , !- Controller List Name PSZ-AC_4:4 Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} PSZ-AC_4:4 Air Loop Branches, !- Branch List Name , !- Connector List Name PSZ-AC_4:4 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name PSZ-AC_4:4 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name PSZ-AC_4:4 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names PSZ-AC_4:4 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names Sizing:System, PSZ-AC_4:4, !- AirLoop Name Sensible, !- Type of Load to Size On AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} 1.0000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 40.0, !- Central Heating Design Supply Air Temperature {C} Coincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum, !- System Outdoor Air Method 1.0, !- Zone Maximum Outdoor Air Fraction CoolingDesignCapacity, !- Cooling Design Capacity Method autosize, !- Cooling Design Capacity {W} , !- Cooling Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Cooling Design Capacity HeatingDesignCapacity, !- Heating Design Capacity Method autosize, !- Heating Design Capacity {W} , !- Heating Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Heating Design Capacity OnOff; !- Central Cooling Capacity Control Method AvailabilityManagerAssignmentList, PSZ-AC_4:4 Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type PSZ-AC_4:4 Availability Manager; !- Availability Manager 1 Name AvailabilityManager:NightCycle, PSZ-AC_4:4 Availability Manager, !- Name Always_On, !- Applicability Schedule Name Type2_FAN_SCH, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} BranchList, PSZ-AC_4:4 Air Loop Branches, !- Name PSZ-AC_4:4 Air Loop Main Branch; !- Branch 1 Name Branch, PSZ-AC_4:4 Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type PSZ-AC_4:4_OA, !- Component 1 Name PSZ-AC_4:4 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name PSZ-AC_4:4_OA-PSZ-AC_4:4_Unitary_PackageNode, !- Component 1 Outlet Node Name AirLoopHVAC:UnitarySystem, !- Component 2 Object Type PSZ-AC_4:4_Unitary_Package_DX, !- Component 2 Name PSZ-AC_4:4_OA-PSZ-AC_4:4_Unitary_PackageNode, !- Component 2 Inlet Node Name PSZ-AC_4:4 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name AirLoopHVAC:ControllerList, PSZ-AC_4:4_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type PSZ-AC_4:4_OA_Controller;!- Controller 1 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, PSZ-AC_4:4_OA_Equipment, !- Name OutdoorAir:Mixer, !- Component 1 Object Type PSZ-AC_4:4_OAMixing Box; !- Component 1 Name AirLoopHVAC:OutdoorAirSystem, PSZ-AC_4:4_OA, !- Name PSZ-AC_4:4_OA_Controllers, !- Controller List Name PSZ-AC_4:4_OA_Equipment, !- Outdoor Air Equipment List Name PSZ-AC_4:4 Availability Manager List; !- Availability Manager List Name OutdoorAir:NodeList, PSZ-AC_4:4_OANode List; !- Node or NodeList Name 1 NodeList, PSZ-AC_4:4_OANode List, !- Name PSZ-AC_4:4_OAInlet Node; !- Node 1 Name OutdoorAir:Mixer, PSZ-AC_4:4_OAMixing Box, !- Name PSZ-AC_4:4_OA-PSZ-AC_4:4_Unitary_PackageNode, !- Mixed Air Node Name PSZ-AC_4:4_OAInlet Node, !- Outdoor Air Stream Node Name PSZ-AC_4:4_OARelief Node,!- Relief Air Stream Node Name PSZ-AC_4:4 Supply Equipment Inlet Node; !- Return Air Stream Node Name SetpointManager:MixedAir, PSZ-AC_4:4_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable PSZ-AC_4:4 Supply Equipment Outlet Node, !- Reference Setpoint Node Name PSZ-AC_4:4_OA-PSZ-AC_4:4_Unitary_PackageNode, !- Fan Inlet Node Name PSZ-AC_4:4_Unitary_PackageHeatCoil air inlet, !- Fan Outlet Node Name PSZ-AC_4:4_OA-PSZ-AC_4:4_Unitary_PackageNode; !- Setpoint Node or NodeList Name Controller:OutdoorAir, PSZ-AC_4:4_OA_Controller,!- Name PSZ-AC_4:4_OARelief Node,!- Relief Air Outlet Node Name PSZ-AC_4:4 Supply Equipment Inlet Node, !- Return Air Node Name PSZ-AC_4:4_OA-PSZ-AC_4:4_Unitary_PackageNode, !- Mixed Air Node Name PSZ-AC_4:4_OAInlet Node, !- Actuator Node Name AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type 28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C} 64000.0, !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name 0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type FixedMinimum, !- Minimum Limit Type Type2_MinOA_MotorizedDamper_SCH, !- Minimum Outdoor Air Schedule Name , !- Minimum Fraction of Outdoor Air Schedule Name SZ_system_OA_Max_Frac_SCH; !- Maximum Fraction of Outdoor Air Schedule Name AirLoopHVAC:UnitarySystem, PSZ-AC_4:4_Unitary_Package_DX, !- Name Load, !- Control Type SMstore3, !- Controlling Zone or Thermostat Location None, !- Dehumidification Control Type ALWAYS_ON, !- Availability Schedule Name PSZ-AC_4:4_OA-PSZ-AC_4:4_Unitary_PackageNode, !- Air Inlet Node Name PSZ-AC_4:4 Supply Equipment Outlet Node, !- Air Outlet Node Name Fan:SystemModel, !- Supply Fan Object Type PSZ-AC_4:4_addAQ_Unitary_Package_fan, !- Supply Fan Name BlowThrough, !- Fan Placement Type2_FAN_SCH, !- Supply Air Fan Operating Mode Schedule Name Coil:Heating:Fuel, !- Heating Coil Object Type PSZ-AC_4:4_Unitary_Package_HeatCoil, !- Heating Coil Name 1, !- DX Heating Coil Sizing Ratio Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type PSZ-AC_4:4_Unitary_Package_CoolCoil, !- Cooling Coil Name No, !- Use DOAS DX Cooling Coil 2, !- Minimum Supply Air Temperature {C} SensibleOnlyLoadControl, !- Latent Load Control , !- Supplemental Heating Coil Object Type , !- Supplemental Heating Coil Name SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s} , !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- No Load Fraction of Autosized Cooling Supply Air Flow Rate , !- No Load Fraction of Autosized Heating Supply Air Flow Rate , !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W} , !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W} AUTOSIZE, !- Maximum Supply Air Temperature {C} , !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C} , !- Outdoor Dry-Bulb Temperature Sensor Node Name , !- Maximum Cycling Rate {cycles/hr} , !- Heat Pump Time Constant {s} , !- Fraction of On-Cycle Power Use , !- Heat Pump Fan Delay Time {s} , !- Ancillary On-Cycle Electric Power {W} , !- Ancillary Off-Cycle Electric Power {W} , !- Design Heat Recovery Water Flow Rate {m3/s} , !- Maximum Temperature for Heat Recovery {C} , !- Heat Recovery Water Inlet Node Name , !- Heat Recovery Water Outlet Node Name UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type PSZ-AC_4:4_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name UnitarySystemPerformance:Multispeed, PSZ-AC_4:4_Unitary_Package_DX_Perf, !- Name 2, !- Number of Speeds for Heating 2, !- Number of Speeds for Cooling No, !- Single Mode Operation 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 1 Supply Air Flow Ratio 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 2 Supply Air Flow Ratio 1; !- Cooling Speed 2 Supply Air Flow Ratio Fan:SystemModel, PSZ-AC_4:4_addAQ_Unitary_Package_fan, !- Name Type2_FAN_SCH, !- Availability Schedule Name PSZ-AC_4:4_OA-PSZ-AC_4:4_Unitary_PackageNode, !- Air Inlet Node Name PSZ-AC_4:4_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name AUTOSIZE, !- Design Maximum Air Flow Rate Discrete, !- Speed Control Method 1, !- Electric Power Minimum Flow Rate Fraction 622.5, !- Design Pressure Rise {Pa} 0.865, !- Motor Efficiency 1.0, ! Motor In Air Stream Fraction AUTOSIZE, !- Design Electric Power Consumption TotalEfficiencyAndPressure, !- Design Power Sizing Method , !- Electric Power Per Unit Flow Rate , !- Electric Power Per Unit Flow Rate Per Pressure 0.56225, !- Fan Total Efficiency , !- Electric Power Function of Flow Fraction Curve Name 622.5, !- Night Ventilation Mode Pressure Rise , !- Night Ventilation Mode Flow Fraction , !- Motor Loss Zone Name , !- Motor Loss Radiative Fraction General, !- End-Use Subcategory 2, !- Number of Speeds 0.66, !- Speed Flow Fraction 0.4, !- Electric Power Fraction 1, !- Speed Flow Fraction 1; !- Electric Power Fraction Coil:Heating:Fuel, PSZ-AC_4:4_Unitary_Package_HeatCoil, !- Name ALWAYS_ON, !- Availability Schedule Name NaturalGas, !- Fuel Type 0.81, !- Burner Efficiency AUTOSIZE, !- Nominal Capacity {W} PSZ-AC_4:4_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name PSZ-AC_4:4_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Cooling:DX:MultiSpeed, PSZ-AC_4:4_Unitary_Package_CoolCoil, !- Name ALWAYS_ON, !- Availability Schedule Name PSZ-AC_4:4_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name PSZ-AC_4:4 Supply Equipment Outlet Node, !- Air Outlet Node Name , !- Condenser Air Inlet Node Name AirCooled, !- Condenser Type , !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} , !- Supply Water Storage Tank Name , !- Condensate Collection Water Storage Tank Name No, !- Apply Part Load Fraction to Speeds Greater than 1 No, !- Apply Latent Degradation to Speeds Greater than 1 , !- Crankcase Heater Capacity {W} 10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C} , !- Basin Heater Capacity {W/K} 2, !- Basin Heater Setpoint Temperature {C} , !- Basin Heater Operating Schedule Name Electricity, !- Fuel Type 2, !- Number of Speeds 10220.095, !- Speed 1 Gross Rated Total Cooling Capacity {W} 0.73738, !- Speed 1 Gross Rated Sensible Heat Ratio 3.7988306741603, !- Speed 1 Gross Rated Cooling COP {W/W} 0.685993333333333, !- Speed 1 Rated Air Flow Rate {m3/s} 0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 1 Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolFFF, !- Speed 1 Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 1 Energy Input Ratio Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 1 Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolPLR, !- Speed 1 Part Load Fraction Correlation Curve Name , !- Speed 1 Nominal Time for Condensate Removal to Begin {s} , !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless} , !- Speed 1 Maximum Cycling Rate {cycles/hr} , !- Speed 1 Latent Capacity Time Constant {s} 0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 1 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s} , !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W} 20440.19, !- Speed 2 Gross Rated Total Cooling Capacity {W} 0.73738, !- Speed 2 Gross Rated Sensible Heat Ratio 3.7988306741603, !- Speed 2 Gross Rated Cooling COP {W/W} 1.02899, !- Speed 2 Rated Air Flow Rate {m3/s} 0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 2 Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolFFF, !- Speed 2 Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 2 Energy Input Ratio Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 2 Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolPLR, !- Speed 2 Part Load Fraction Correlation Curve Name , !- Speed 2 Nominal Time for Condensate Removal to Begin {s} , !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless} , !- Speed 2 Maximum Cycling Rate {cycles/hr} , !- Speed 2 Latent Capacity Time Constant {s} 0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 2 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s} ; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W} AirLoopHVAC:SupplyPath, PSZ-AC_4:4, !- Name PSZ-AC_4:4 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type PSZ-AC_4:4 Supply Air Splitter; !- Component 1 Name AirLoopHVAC:ZoneSplitter, PSZ-AC_4:4 Supply Air Splitter, !- Name PSZ-AC_4:4 Zone Equipment Inlet Node, !- Inlet Node Name SMstore3 Direct Air Inlet Node Name; !- Outlet 1 Node Name AirLoopHVAC:ReturnPath, PSZ-AC_4:4 Return Air Path, !- Name PSZ-AC_4:4 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type PSZ-AC_4:4 Return Air Mixer; !- Component 1 Name AirLoopHVAC:ZoneMixer, PSZ-AC_4:4 Return Air Mixer, !- Name PSZ-AC_4:4 Zone Equipment Outlet Node, !- Outlet Node Name SMstore3 Return Air Node Name; !- Inlet 1 Node Name AirLoopHVAC, PSZ-AC_5:5, !- Name , !- Controller List Name PSZ-AC_5:5 Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} PSZ-AC_5:5 Air Loop Branches, !- Branch List Name , !- Connector List Name PSZ-AC_5:5 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name PSZ-AC_5:5 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name PSZ-AC_5:5 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names PSZ-AC_5:5 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names Sizing:System, PSZ-AC_5:5, !- AirLoop Name Sensible, !- Type of Load to Size On AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} 1.0000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 40.0, !- Central Heating Design Supply Air Temperature {C} Coincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum, !- System Outdoor Air Method 1.0, !- Zone Maximum Outdoor Air Fraction CoolingDesignCapacity, !- Cooling Design Capacity Method autosize, !- Cooling Design Capacity {W} , !- Cooling Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Cooling Design Capacity HeatingDesignCapacity, !- Heating Design Capacity Method autosize, !- Heating Design Capacity {W} , !- Heating Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Heating Design Capacity OnOff; !- Central Cooling Capacity Control Method AvailabilityManagerAssignmentList, PSZ-AC_5:5 Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type PSZ-AC_5:5 Availability Manager; !- Availability Manager 1 Name AvailabilityManager:NightCycle, PSZ-AC_5:5 Availability Manager, !- Name Always_On, !- Applicability Schedule Name Type2_FAN_SCH, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} BranchList, PSZ-AC_5:5 Air Loop Branches, !- Name PSZ-AC_5:5 Air Loop Main Branch; !- Branch 1 Name Branch, PSZ-AC_5:5 Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type PSZ-AC_5:5_OA, !- Component 1 Name PSZ-AC_5:5 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name PSZ-AC_5:5_OA-PSZ-AC_5:5_Unitary_PackageNode, !- Component 1 Outlet Node Name AirLoopHVAC:UnitarySystem, !- Component 2 Object Type PSZ-AC_5:5_Unitary_Package_DX, !- Component 2 Name PSZ-AC_5:5_OA-PSZ-AC_5:5_Unitary_PackageNode, !- Component 2 Inlet Node Name PSZ-AC_5:5 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name AirLoopHVAC:ControllerList, PSZ-AC_5:5_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type PSZ-AC_5:5_OA_Controller;!- Controller 1 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, PSZ-AC_5:5_OA_Equipment, !- Name OutdoorAir:Mixer, !- Component 1 Object Type PSZ-AC_5:5_OAMixing Box; !- Component 1 Name AirLoopHVAC:OutdoorAirSystem, PSZ-AC_5:5_OA, !- Name PSZ-AC_5:5_OA_Controllers, !- Controller List Name PSZ-AC_5:5_OA_Equipment, !- Outdoor Air Equipment List Name PSZ-AC_5:5 Availability Manager List; !- Availability Manager List Name OutdoorAir:NodeList, PSZ-AC_5:5_OANode List; !- Node or NodeList Name 1 NodeList, PSZ-AC_5:5_OANode List, !- Name PSZ-AC_5:5_OAInlet Node; !- Node 1 Name OutdoorAir:Mixer, PSZ-AC_5:5_OAMixing Box, !- Name PSZ-AC_5:5_OA-PSZ-AC_5:5_Unitary_PackageNode, !- Mixed Air Node Name PSZ-AC_5:5_OAInlet Node, !- Outdoor Air Stream Node Name PSZ-AC_5:5_OARelief Node,!- Relief Air Stream Node Name PSZ-AC_5:5 Supply Equipment Inlet Node; !- Return Air Stream Node Name SetpointManager:MixedAir, PSZ-AC_5:5_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable PSZ-AC_5:5 Supply Equipment Outlet Node, !- Reference Setpoint Node Name PSZ-AC_5:5_OA-PSZ-AC_5:5_Unitary_PackageNode, !- Fan Inlet Node Name PSZ-AC_5:5_Unitary_PackageHeatCoil air inlet, !- Fan Outlet Node Name PSZ-AC_5:5_OA-PSZ-AC_5:5_Unitary_PackageNode; !- Setpoint Node or NodeList Name Controller:OutdoorAir, PSZ-AC_5:5_OA_Controller,!- Name PSZ-AC_5:5_OARelief Node,!- Relief Air Outlet Node Name PSZ-AC_5:5 Supply Equipment Inlet Node, !- Return Air Node Name PSZ-AC_5:5_OA-PSZ-AC_5:5_Unitary_PackageNode, !- Mixed Air Node Name PSZ-AC_5:5_OAInlet Node, !- Actuator Node Name AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type 28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C} 64000.0, !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name 0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type FixedMinimum, !- Minimum Limit Type Type2_MinOA_MotorizedDamper_SCH, !- Minimum Outdoor Air Schedule Name , !- Minimum Fraction of Outdoor Air Schedule Name SZ_system_OA_Max_Frac_SCH; !- Maximum Fraction of Outdoor Air Schedule Name AirLoopHVAC:UnitarySystem, PSZ-AC_5:5_Unitary_Package_DX, !- Name Load, !- Control Type SMstore4, !- Controlling Zone or Thermostat Location None, !- Dehumidification Control Type ALWAYS_ON, !- Availability Schedule Name PSZ-AC_5:5_OA-PSZ-AC_5:5_Unitary_PackageNode, !- Air Inlet Node Name PSZ-AC_5:5 Supply Equipment Outlet Node, !- Air Outlet Node Name Fan:SystemModel, !- Supply Fan Object Type PSZ-AC_5:5_addAQ_Unitary_Package_fan, !- Supply Fan Name BlowThrough, !- Fan Placement Type2_FAN_SCH, !- Supply Air Fan Operating Mode Schedule Name Coil:Heating:Fuel, !- Heating Coil Object Type PSZ-AC_5:5_Unitary_Package_HeatCoil, !- Heating Coil Name 1, !- DX Heating Coil Sizing Ratio Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type PSZ-AC_5:5_Unitary_Package_CoolCoil, !- Cooling Coil Name No, !- Use DOAS DX Cooling Coil 2, !- Minimum Supply Air Temperature {C} SensibleOnlyLoadControl, !- Latent Load Control , !- Supplemental Heating Coil Object Type , !- Supplemental Heating Coil Name SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s} , !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- No Load Fraction of Autosized Cooling Supply Air Flow Rate , !- No Load Fraction of Autosized Heating Supply Air Flow Rate , !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W} , !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W} AUTOSIZE, !- Maximum Supply Air Temperature {C} , !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C} , !- Outdoor Dry-Bulb Temperature Sensor Node Name , !- Maximum Cycling Rate {cycles/hr} , !- Heat Pump Time Constant {s} , !- Fraction of On-Cycle Power Use , !- Heat Pump Fan Delay Time {s} , !- Ancillary On-Cycle Electric Power {W} , !- Ancillary Off-Cycle Electric Power {W} , !- Design Heat Recovery Water Flow Rate {m3/s} , !- Maximum Temperature for Heat Recovery {C} , !- Heat Recovery Water Inlet Node Name , !- Heat Recovery Water Outlet Node Name UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type PSZ-AC_5:5_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name UnitarySystemPerformance:Multispeed, PSZ-AC_5:5_Unitary_Package_DX_Perf, !- Name 2, !- Number of Speeds for Heating 2, !- Number of Speeds for Cooling No, !- Single Mode Operation 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 1 Supply Air Flow Ratio 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 2 Supply Air Flow Ratio 1; !- Cooling Speed 2 Supply Air Flow Ratio Fan:SystemModel, PSZ-AC_5:5_addAQ_Unitary_Package_fan, !- Name Type2_FAN_SCH, !- Availability Schedule Name PSZ-AC_5:5_OA-PSZ-AC_5:5_Unitary_PackageNode, !- Air Inlet Node Name PSZ-AC_5:5_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name AUTOSIZE, !- Design Maximum Air Flow Rate Discrete, !- Speed Control Method 1, !- Electric Power Minimum Flow Rate Fraction 622.5, !- Design Pressure Rise {Pa} 0.865, !- Motor Efficiency 1.0, ! Motor In Air Stream Fraction AUTOSIZE, !- Design Electric Power Consumption TotalEfficiencyAndPressure, !- Design Power Sizing Method , !- Electric Power Per Unit Flow Rate , !- Electric Power Per Unit Flow Rate Per Pressure 0.56225, !- Fan Total Efficiency , !- Electric Power Function of Flow Fraction Curve Name 622.5, !- Night Ventilation Mode Pressure Rise , !- Night Ventilation Mode Flow Fraction , !- Motor Loss Zone Name , !- Motor Loss Radiative Fraction General, !- End-Use Subcategory 2, !- Number of Speeds 0.66, !- Speed Flow Fraction 0.4, !- Electric Power Fraction 1, !- Speed Flow Fraction 1; !- Electric Power Fraction Coil:Heating:Fuel, PSZ-AC_5:5_Unitary_Package_HeatCoil, !- Name ALWAYS_ON, !- Availability Schedule Name NaturalGas, !- Fuel Type 0.81, !- Burner Efficiency AUTOSIZE, !- Nominal Capacity {W} PSZ-AC_5:5_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name PSZ-AC_5:5_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name; !- Temperature Setpoint Node Name Coil:Cooling:DX:MultiSpeed, PSZ-AC_5:5_Unitary_Package_CoolCoil, !- Name ALWAYS_ON, !- Availability Schedule Name PSZ-AC_5:5_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name PSZ-AC_5:5 Supply Equipment Outlet Node, !- Air Outlet Node Name , !- Condenser Air Inlet Node Name AirCooled, !- Condenser Type , !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} , !- Supply Water Storage Tank Name , !- Condensate Collection Water Storage Tank Name No, !- Apply Part Load Fraction to Speeds Greater than 1 No, !- Apply Latent Degradation to Speeds Greater than 1 , !- Crankcase Heater Capacity {W} 10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C} , !- Basin Heater Capacity {W/K} 2, !- Basin Heater Setpoint Temperature {C} , !- Basin Heater Operating Schedule Name Electricity, !- Fuel Type 2, !- Number of Speeds 10226.21, !- Speed 1 Gross Rated Total Cooling Capacity {W} 0.73479, !- Speed 1 Gross Rated Sensible Heat Ratio 3.7988306741603, !- Speed 1 Gross Rated Cooling COP {W/W} 0.680606666666667, !- Speed 1 Rated Air Flow Rate {m3/s} 0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 1 Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolFFF, !- Speed 1 Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 1 Energy Input Ratio Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 1 Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolPLR, !- Speed 1 Part Load Fraction Correlation Curve Name , !- Speed 1 Nominal Time for Condensate Removal to Begin {s} , !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless} , !- Speed 1 Maximum Cycling Rate {cycles/hr} , !- Speed 1 Latent Capacity Time Constant {s} 0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 1 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s} , !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W} 20452.42, !- Speed 2 Gross Rated Total Cooling Capacity {W} 0.73479, !- Speed 2 Gross Rated Sensible Heat Ratio 3.7988306741603, !- Speed 2 Gross Rated Cooling COP {W/W} 1.02091, !- Speed 2 Rated Air Flow Rate {m3/s} 0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 2 Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolFFF, !- Speed 2 Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 2 Energy Input Ratio Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 2 Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolPLR, !- Speed 2 Part Load Fraction Correlation Curve Name , !- Speed 2 Nominal Time for Condensate Removal to Begin {s} , !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless} , !- Speed 2 Maximum Cycling Rate {cycles/hr} , !- Speed 2 Latent Capacity Time Constant {s} 0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 2 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s} ; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W} AirLoopHVAC:SupplyPath, PSZ-AC_5:5, !- Name PSZ-AC_5:5 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type PSZ-AC_5:5 Supply Air Splitter; !- Component 1 Name AirLoopHVAC:ZoneSplitter, PSZ-AC_5:5 Supply Air Splitter, !- Name PSZ-AC_5:5 Zone Equipment Inlet Node, !- Inlet Node Name SMstore4 Direct Air Inlet Node Name; !- Outlet 1 Node Name AirLoopHVAC:ReturnPath, PSZ-AC_5:5 Return Air Path, !- Name PSZ-AC_5:5 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type PSZ-AC_5:5 Return Air Mixer; !- Component 1 Name AirLoopHVAC:ZoneMixer, PSZ-AC_5:5 Return Air Mixer, !- Name PSZ-AC_5:5 Zone Equipment Outlet Node, !- Outlet Node Name SMstore4 Return Air Node Name; !- Inlet 1 Node Name AirLoopHVAC, PSZ-AC_6:6, !- Name , !- Controller List Name PSZ-AC_6:6 Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} PSZ-AC_6:6 Air Loop Branches, !- Branch List Name , !- Connector List Name PSZ-AC_6:6 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name PSZ-AC_6:6 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name PSZ-AC_6:6 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names PSZ-AC_6:6 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names Sizing:System, PSZ-AC_6:6, !- AirLoop Name Sensible, !- Type of Load to Size On AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} 1.0000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 40.0, !- Central Heating Design Supply Air Temperature {C} Coincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum, !- System Outdoor Air Method 1.0, !- Zone Maximum Outdoor Air Fraction CoolingDesignCapacity, !- Cooling Design Capacity Method autosize, !- Cooling Design Capacity {W} , !- Cooling Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Cooling Design Capacity HeatingDesignCapacity, !- Heating Design Capacity Method autosize, !- Heating Design Capacity {W} , !- Heating Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Heating Design Capacity OnOff; !- Central Cooling Capacity Control Method AvailabilityManagerAssignmentList, PSZ-AC_6:6 Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type PSZ-AC_6:6 Availability Manager; !- Availability Manager 1 Name AvailabilityManager:NightCycle, PSZ-AC_6:6 Availability Manager, !- Name Always_On, !- Applicability Schedule Name Type3_FAN_SCH, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} BranchList, PSZ-AC_6:6 Air Loop Branches, !- Name PSZ-AC_6:6 Air Loop Main Branch; !- Branch 1 Name Branch, PSZ-AC_6:6 Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type PSZ-AC_6:6_OA, !- Component 1 Name PSZ-AC_6:6 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name PSZ-AC_6:6_OA-PSZ-AC_6:6_Unitary_PackageNode, !- Component 1 Outlet Node Name AirLoopHVAC:UnitarySystem, !- Component 2 Object Type PSZ-AC_6:6_Unitary_Package_DX, !- Component 2 Name PSZ-AC_6:6_OA-PSZ-AC_6:6_Unitary_PackageNode, !- Component 2 Inlet Node Name PSZ-AC_6:6 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name Fan:SystemModel, PSZ-AC_6:6_addAQ_Unitary_Package_fan, !- Name Type3_FAN_SCH, !- Availability Schedule Name PSZ-AC_6:6_OA-PSZ-AC_6:6_Unitary_PackageNode, !- Air Inlet Node Name PSZ-AC_6:6_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name AUTOSIZE, !- Design Maximum Air Flow Rate Discrete, !- Speed Control Method 1, !- Electric Power Minimum Flow Rate Fraction 622.5, !- Design Pressure Rise {Pa} 0.895, !- Motor Efficiency 1.0, ! Motor In Air Stream Fraction AUTOSIZE, !- Design Electric Power Consumption TotalEfficiencyAndPressure, !- Design Power Sizing Method , !- Electric Power Per Unit Flow Rate , !- Electric Power Per Unit Flow Rate Per Pressure 0.58175, !- Fan Total Efficiency , !- Electric Power Function of Flow Fraction Curve Name 622.5, !- Night Ventilation Mode Pressure Rise , !- Night Ventilation Mode Flow Fraction , !- Motor Loss Zone Name , !- Motor Loss Radiative Fraction General, !- End-Use Subcategory 2, !- Number of Speeds 0.66, !- Speed Flow Fraction 0.4, !- Electric Power Fraction 1, !- Speed Flow Fraction 1; !- Electric Power Fraction AirLoopHVAC:ControllerList, PSZ-AC_6:6_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type PSZ-AC_6:6_OA_Controller;!- Controller 1 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, PSZ-AC_6:6_OA_Equipment, !- Name OutdoorAir:Mixer, !- Component 1 Object Type PSZ-AC_6:6_OAMixing Box; !- Component 1 Name AirLoopHVAC:OutdoorAirSystem, PSZ-AC_6:6_OA, !- Name PSZ-AC_6:6_OA_Controllers, !- Controller List Name PSZ-AC_6:6_OA_Equipment, !- Outdoor Air Equipment List Name PSZ-AC_6:6 Availability Manager List; !- Availability Manager List Name OutdoorAir:NodeList, PSZ-AC_6:6_OANode List; !- Node or NodeList Name 1 NodeList, PSZ-AC_6:6_OANode List, !- Name PSZ-AC_6:6_OAInlet Node; !- Node 1 Name OutdoorAir:Mixer, PSZ-AC_6:6_OAMixing Box, !- Name PSZ-AC_6:6_OA-PSZ-AC_6:6_Unitary_PackageNode, !- Mixed Air Node Name PSZ-AC_6:6_OAInlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name PSZ-AC_6:6_OARelief Node,!- Relief Air Stream Node Name PSZ-AC_6:6 Supply Equipment Inlet Node; !- Return Air Stream Node Name SetpointManager:MixedAir, PSZ-AC_6:6_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable PSZ-AC_6:6 Supply Equipment Outlet Node, !- Reference Setpoint Node Name PSZ-AC_6:6_OA-PSZ-AC_6:6_Unitary_PackageNode, !- Fan Inlet Node Name PSZ-AC_6:6_Unitary_PackageHeatCoil air inlet, !- Fan Outlet Node Name PSZ-AC_6:6_OA-PSZ-AC_6:6_Unitary_PackageNode; !- Setpoint Node or NodeList Name Controller:OutdoorAir, PSZ-AC_6:6_OA_Controller, !- Name PSZ-AC_6:6_OARelief Node, !- Relief Air Outlet Node Name PSZ-AC_6:6 Supply Equipment Inlet Node, !- Return Air Node Name PSZ-AC_6:6_OA-PSZ-AC_6:6_Unitary_PackageNode, !- Mixed Air Node Name PSZ-AC_6:6_OAInlet Node, !- Actuator Node Name AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type 28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C} 64000.0, !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name 0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type FixedMinimum, !- Minimum Limit Type Type3_MinOA_MotorizedDamper_SCH, !- Minimum Outdoor Air Schedule Name , !- Minimum Fraction of Outdoor Air Schedule Name SZ_system_OA_Max_Frac_SCH, !- Maximum Fraction of Outdoor Air Schedule Name , !- Mechanical Ventilation Controller Name , !- Time of Day Economizer Control Schedule Name , !- High Humidity Control , !- Humidistat Control Zone Name , !- High Humidity Outdoor Air Flow Ratio , !- Control High Indoor Humidity Based on Outdoor Humidity Ratio ; !- Minimum Fraction of Outdoor Air Schedule Name !- Heat Recovery Bypass Control Type AirLoopHVAC:UnitarySystem, PSZ-AC_6:6_Unitary_Package_DX, !- Name Load, !- Control Type LGstore2, !- Controlling Zone or Thermostat Location None, !- Dehumidification Control Type ALWAYS_ON, !- Availability Schedule Name PSZ-AC_6:6_OA-PSZ-AC_6:6_Unitary_PackageNode, !- Air Inlet Node Name PSZ-AC_6:6 Supply Equipment Outlet Node, !- Air Outlet Node Name Fan:SystemModel, !- Supply Fan Object Type PSZ-AC_6:6_addAQ_Unitary_Package_fan, !- Supply Fan Name BlowThrough, !- Fan Placement Type3_FAN_SCH, !- Supply Air Fan Operating Mode Schedule Name Coil:Heating:Fuel, !- Heating Coil Object Type PSZ-AC_6:6_Unitary_Package_HeatCoil, !- Heating Coil Name 1, !- DX Heating Coil Sizing Ratio Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type PSZ-AC_6:6_Unitary_Package_CoolCoil, !- Cooling Coil Name No, !- Use DOAS DX Cooling Coil 2, !- Minimum Supply Air Temperature {C} SensibleOnlyLoadControl, !- Latent Load Control , !- Supplemental Heating Coil Object Type , !- Supplemental Heating Coil Name SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s} , !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- No Load Fraction of Autosized Cooling Supply Air Flow Rate , !- No Load Fraction of Autosized Heating Supply Air Flow Rate , !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W} , !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W} AUTOSIZE, !- Maximum Supply Air Temperature {C} , !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C} , !- Outdoor Dry-Bulb Temperature Sensor Node Name , !- Maximum Cycling Rate {cycles/hr} , !- Heat Pump Time Constant {s} , !- Fraction of On-Cycle Power Use , !- Heat Pump Fan Delay Time {s} , !- Ancillary On-Cycle Electric Power {W} , !- Ancillary Off-Cycle Electric Power {W} , !- Design Heat Recovery Water Flow Rate {m3/s} , !- Maximum Temperature for Heat Recovery {C} , !- Heat Recovery Water Inlet Node Name , !- Heat Recovery Water Outlet Node Name UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type PSZ-AC_6:6_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name UnitarySystemPerformance:Multispeed, PSZ-AC_6:6_Unitary_Package_DX_Perf, !- Name 2, !- Number of Speeds for Heating 2, !- Number of Speeds for Cooling No, !- Single Mode Operation 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 1 Supply Air Flow Ratio 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 2 Supply Air Flow Ratio 1; !- Cooling Speed 2 Supply Air Flow Ratio Coil:Heating:Fuel, PSZ-AC_6:6_Unitary_Package_HeatCoil, !- Name ALWAYS_ON, !- Availability Schedule Name NaturalGas, !- Fuel Type 0.81, !- Burner Efficiency AUTOSIZE, !- Nominal Capacity {W} PSZ-AC_6:6_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name PSZ-AC_6:6_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Cooling:DX:MultiSpeed, PSZ-AC_6:6_Unitary_Package_CoolCoil, !- Name ALWAYS_ON, !- Availability Schedule Name PSZ-AC_6:6_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name PSZ-AC_6:6 Supply Equipment Outlet Node, !- Air Outlet Node Name , !- Condenser Air Inlet Node Name AirCooled, !- Condenser Type , !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} , !- Supply Water Storage Tank Name , !- Condensate Collection Water Storage Tank Name No, !- Apply Part Load Fraction to Speeds Greater than 1 No, !- Apply Latent Degradation to Speeds Greater than 1 , !- Crankcase Heater Capacity {W} 10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C} , !- Basin Heater Capacity {W/K} 2, !- Basin Heater Setpoint Temperature {C} , !- Basin Heater Operating Schedule Name Electricity, !- Fuel Type 2, !- Number of Speeds 18662.875, !- Speed 1 Gross Rated Total Cooling Capacity {W} 0.68566, !- Speed 1 Gross Rated Sensible Heat Ratio 3.7988306741603, !- Speed 1 Gross Rated Cooling COP {W/W} 1.04121333333333, !- Speed 1 Rated Air Flow Rate {m3/s} 0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 1 Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolFFF, !- Speed 1 Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 1 Energy Input Ratio Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 1 Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolPLR, !- Speed 1 Part Load Fraction Correlation Curve Name , !- Speed 1 Nominal Time for Condensate Removal to Begin {s} , !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless} , !- Speed 1 Maximum Cycling Rate {cycles/hr} , !- Speed 1 Latent Capacity Time Constant {s} 0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 1 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s} , !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W} 37325.75, !- Speed 2 Gross Rated Total Cooling Capacity {W} 0.68566, !- Speed 2 Gross Rated Sensible Heat Ratio 3.7988306741603, !- Speed 2 Gross Rated Cooling COP {W/W} 1.56182, !- Speed 2 Rated Air Flow Rate {m3/s} 0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 2 Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolFFF, !- Speed 2 Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 2 Energy Input Ratio Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 2 Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolPLR, !- Speed 2 Part Load Fraction Correlation Curve Name , !- Speed 2 Nominal Time for Condensate Removal to Begin {s} , !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless} , !- Speed 2 Maximum Cycling Rate {cycles/hr} , !- Speed 2 Latent Capacity Time Constant {s} 0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 2 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s} ; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W} AirLoopHVAC:SupplyPath, PSZ-AC_6:6, !- Name PSZ-AC_6:6 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type PSZ-AC_6:6 Supply Air Splitter; !- Component 1 Name AirLoopHVAC:ZoneSplitter, PSZ-AC_6:6 Supply Air Splitter, !- Name PSZ-AC_6:6 Zone Equipment Inlet Node, !- Inlet Node Name LGstore2 Direct Air Inlet Node Name; !- Outlet 1 Node Name AirLoopHVAC:ReturnPath, PSZ-AC_6:6 Return Air Path, !- Name PSZ-AC_6:6 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type PSZ-AC_6:6 Return Air Mixer; !- Component 1 Name AirLoopHVAC:ZoneMixer, PSZ-AC_6:6 Return Air Mixer, !- Name PSZ-AC_6:6 Zone Equipment Outlet Node, !- Outlet Node Name LGstore2 Return Air Node Name; !- Inlet 1 Node Name AirLoopHVAC, PSZ-AC_7:7, !- Name , !- Controller List Name PSZ-AC_7:7 Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} PSZ-AC_7:7 Air Loop Branches, !- Branch List Name , !- Connector List Name PSZ-AC_7:7 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name PSZ-AC_7:7 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name PSZ-AC_7:7 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names PSZ-AC_7:7 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names Sizing:System, PSZ-AC_7:7, !- AirLoop Name Sensible, !- Type of Load to Size On AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} 1.0000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 40.0, !- Central Heating Design Supply Air Temperature {C} Coincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum, !- System Outdoor Air Method 1.0, !- Zone Maximum Outdoor Air Fraction CoolingDesignCapacity, !- Cooling Design Capacity Method autosize, !- Cooling Design Capacity {W} , !- Cooling Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Cooling Design Capacity HeatingDesignCapacity, !- Heating Design Capacity Method autosize, !- Heating Design Capacity {W} , !- Heating Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Heating Design Capacity OnOff; !- Central Cooling Capacity Control Method AvailabilityManagerAssignmentList, PSZ-AC_7:7 Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type PSZ-AC_7:7 Availability Manager; !- Availability Manager 1 Name AvailabilityManager:NightCycle, PSZ-AC_7:7 Availability Manager, !- Name Always_On, !- Applicability Schedule Name Type3_FAN_SCH, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} BranchList, PSZ-AC_7:7 Air Loop Branches, !- Name PSZ-AC_7:7 Air Loop Main Branch; !- Branch 1 Name Branch, PSZ-AC_7:7 Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type PSZ-AC_7:7_OA, !- Component 1 Name PSZ-AC_7:7 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name PSZ-AC_7:7_OA-PSZ-AC_7:7_Unitary_PackageNode, !- Component 1 Outlet Node Name AirLoopHVAC:UnitarySystem, !- Component 2 Object Type PSZ-AC_7:7_Unitary_Package_DX, !- Component 2 Name PSZ-AC_7:7_OA-PSZ-AC_7:7_Unitary_PackageNode, !- Component 2 Inlet Node Name PSZ-AC_7:7 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name AirLoopHVAC:ControllerList, PSZ-AC_7:7_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type PSZ-AC_7:7_OA_Controller;!- Controller 1 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, PSZ-AC_7:7_OA_Equipment, !- Name OutdoorAir:Mixer, !- Component 1 Object Type PSZ-AC_7:7_OAMixing Box; !- Component 1 Name AirLoopHVAC:OutdoorAirSystem, PSZ-AC_7:7_OA, !- Name PSZ-AC_7:7_OA_Controllers, !- Controller List Name PSZ-AC_7:7_OA_Equipment, !- Outdoor Air Equipment List Name PSZ-AC_7:7 Availability Manager List; !- Availability Manager List Name OutdoorAir:NodeList, PSZ-AC_7:7_OANode List; !- Node or NodeList Name 1 NodeList, PSZ-AC_7:7_OANode List, !- Name PSZ-AC_7:7_OAInlet Node; !- Node 1 Name OutdoorAir:Mixer, PSZ-AC_7:7_OAMixing Box, !- Name PSZ-AC_7:7_OA-PSZ-AC_7:7_Unitary_PackageNode, !- Mixed Air Node Name PSZ-AC_7:7_OAInlet Node, !- Outdoor Air Stream Node Name PSZ-AC_7:7_OARelief Node,!- Relief Air Stream Node Name PSZ-AC_7:7 Supply Equipment Inlet Node; !- Return Air Stream Node Name SetpointManager:MixedAir, PSZ-AC_7:7_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable PSZ-AC_7:7 Supply Equipment Outlet Node, !- Reference Setpoint Node Name PSZ-AC_7:7_OA-PSZ-AC_7:7_Unitary_PackageNode, !- Fan Inlet Node Name PSZ-AC_7:7_Unitary_PackageHeatCoil air inlet, !- Fan Outlet Node Name PSZ-AC_7:7_OA-PSZ-AC_7:7_Unitary_PackageNode; !- Setpoint Node or NodeList Name Controller:OutdoorAir, PSZ-AC_7:7_OA_Controller,!- Name PSZ-AC_7:7_OARelief Node,!- Relief Air Outlet Node Name PSZ-AC_7:7 Supply Equipment Inlet Node, !- Return Air Node Name PSZ-AC_7:7_OA-PSZ-AC_7:7_Unitary_PackageNode, !- Mixed Air Node Name PSZ-AC_7:7_OAInlet Node, !- Actuator Node Name AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type 28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C} 64000.0, !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name 0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type FixedMinimum, !- Minimum Limit Type Type3_MinOA_MotorizedDamper_SCH, !- Minimum Outdoor Air Schedule Name , !- Minimum Fraction of Outdoor Air Schedule Name SZ_system_OA_Max_Frac_SCH; !- Maximum Fraction of Outdoor Air Schedule Name AirLoopHVAC:UnitarySystem, PSZ-AC_7:7_Unitary_Package_DX, !- Name Load, !- Control Type SMstore5, !- Controlling Zone or Thermostat Location None, !- Dehumidification Control Type ALWAYS_ON, !- Availability Schedule Name PSZ-AC_7:7_OA-PSZ-AC_7:7_Unitary_PackageNode, !- Air Inlet Node Name PSZ-AC_7:7 Supply Equipment Outlet Node, !- Air Outlet Node Name Fan:SystemModel, !- Supply Fan Object Type PSZ-AC_7:7_addAQ_Unitary_Package_fan, !- Supply Fan Name BlowThrough, !- Fan Placement Type3_FAN_SCH, !- Supply Air Fan Operating Mode Schedule Name Coil:Heating:Fuel, !- Heating Coil Object Type PSZ-AC_7:7_Unitary_Package_HeatCoil, !- Heating Coil Name 1, !- DX Heating Coil Sizing Ratio Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type PSZ-AC_7:7_Unitary_Package_CoolCoil, !- Cooling Coil Name No, !- Use DOAS DX Cooling Coil 2, !- Minimum Supply Air Temperature {C} SensibleOnlyLoadControl, !- Latent Load Control , !- Supplemental Heating Coil Object Type , !- Supplemental Heating Coil Name SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s} , !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- No Load Fraction of Autosized Cooling Supply Air Flow Rate , !- No Load Fraction of Autosized Heating Supply Air Flow Rate , !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W} , !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W} AUTOSIZE, !- Maximum Supply Air Temperature {C} , !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C} , !- Outdoor Dry-Bulb Temperature Sensor Node Name , !- Maximum Cycling Rate {cycles/hr} , !- Heat Pump Time Constant {s} , !- Fraction of On-Cycle Power Use , !- Heat Pump Fan Delay Time {s} , !- Ancillary On-Cycle Electric Power {W} , !- Ancillary Off-Cycle Electric Power {W} , !- Design Heat Recovery Water Flow Rate {m3/s} , !- Maximum Temperature for Heat Recovery {C} , !- Heat Recovery Water Inlet Node Name , !- Heat Recovery Water Outlet Node Name UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type PSZ-AC_7:7_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name UnitarySystemPerformance:Multispeed, PSZ-AC_7:7_Unitary_Package_DX_Perf, !- Name 2, !- Number of Speeds for Heating 2, !- Number of Speeds for Cooling No, !- Single Mode Operation 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 1 Supply Air Flow Ratio 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 2 Supply Air Flow Ratio 1; !- Cooling Speed 2 Supply Air Flow Ratio Fan:SystemModel, PSZ-AC_7:7_addAQ_Unitary_Package_fan, !- Name Type3_FAN_SCH, !- Availability Schedule Name PSZ-AC_7:7_OA-PSZ-AC_7:7_Unitary_PackageNode, !- Air Inlet Node Name PSZ-AC_7:7_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name AUTOSIZE, !- Design Maximum Air Flow Rate Discrete, !- Speed Control Method 1, !- Electric Power Minimum Flow Rate Fraction 622.5, !- Design Pressure Rise {Pa} 0.865, !- Motor Efficiency 1.0, ! Motor In Air Stream Fraction AUTOSIZE, !- Design Electric Power Consumption TotalEfficiencyAndPressure, !- Design Power Sizing Method , !- Electric Power Per Unit Flow Rate , !- Electric Power Per Unit Flow Rate Per Pressure 0.56225, !- Fan Total Efficiency , !- Electric Power Function of Flow Fraction Curve Name 622.5, !- Night Ventilation Mode Pressure Rise , !- Night Ventilation Mode Flow Fraction , !- Motor Loss Zone Name , !- Motor Loss Radiative Fraction General, !- End-Use Subcategory 2, !- Number of Speeds 0.66, !- Speed Flow Fraction 0.4, !- Electric Power Fraction 1, !- Speed Flow Fraction 1; !- Electric Power Fraction Coil:Heating:Fuel, PSZ-AC_7:7_Unitary_Package_HeatCoil, !- Name ALWAYS_ON, !- Availability Schedule Name NaturalGas, !- Fuel Type 0.81, !- Burner Efficiency AUTOSIZE, !- Nominal Capacity {W} PSZ-AC_7:7_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name PSZ-AC_7:7_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Cooling:DX:MultiSpeed, PSZ-AC_7:7_Unitary_Package_CoolCoil, !- Name ALWAYS_ON, !- Availability Schedule Name PSZ-AC_7:7_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name PSZ-AC_7:7 Supply Equipment Outlet Node, !- Air Outlet Node Name , !- Condenser Air Inlet Node Name AirCooled, !- Condenser Type , !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} , !- Supply Water Storage Tank Name , !- Condensate Collection Water Storage Tank Name No, !- Apply Part Load Fraction to Speeds Greater than 1 No, !- Apply Latent Degradation to Speeds Greater than 1 , !- Crankcase Heater Capacity {W} 10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C} , !- Basin Heater Capacity {W/K} 2, !- Basin Heater Setpoint Temperature {C} , !- Basin Heater Operating Schedule Name Electricity, !- Fuel Type 2, !- Number of Speeds 10043.905, !- Speed 1 Gross Rated Total Cooling Capacity {W} 0.68590, !- Speed 1 Gross Rated Sensible Heat Ratio 3.7988306741603, !- Speed 1 Gross Rated Cooling COP {W/W} 0.560886666666667, !- Speed 1 Rated Air Flow Rate {m3/s} 0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 1 Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolFFF, !- Speed 1 Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 1 Energy Input Ratio Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 1 Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolPLR, !- Speed 1 Part Load Fraction Correlation Curve Name , !- Speed 1 Nominal Time for Condensate Removal to Begin {s} , !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless} , !- Speed 1 Maximum Cycling Rate {cycles/hr} , !- Speed 1 Latent Capacity Time Constant {s} 0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 1 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s} , !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W} 20087.81, !- Speed 2 Gross Rated Total Cooling Capacity {W} 0.68590, !- Speed 2 Gross Rated Sensible Heat Ratio 3.7988306741603, !- Speed 2 Gross Rated Cooling COP {W/W} 0.84133, !- Speed 2 Rated Air Flow Rate {m3/s} 0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 2 Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolFFF, !- Speed 2 Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 2 Energy Input Ratio Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 2 Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolPLR, !- Speed 2 Part Load Fraction Correlation Curve Name , !- Speed 2 Nominal Time for Condensate Removal to Begin {s} , !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless} , !- Speed 2 Maximum Cycling Rate {cycles/hr} , !- Speed 2 Latent Capacity Time Constant {s} 0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 2 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s} ; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W} AirLoopHVAC:SupplyPath, PSZ-AC_7:7, !- Name PSZ-AC_7:7 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type PSZ-AC_7:7 Supply Air Splitter; !- Component 1 Name AirLoopHVAC:ZoneSplitter, PSZ-AC_7:7 Supply Air Splitter, !- Name PSZ-AC_7:7 Zone Equipment Inlet Node, !- Inlet Node Name SMstore5 Direct Air Inlet Node Name; !- Outlet 1 Node Name AirLoopHVAC:ReturnPath, PSZ-AC_7:7 Return Air Path, !- Name PSZ-AC_7:7 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type PSZ-AC_7:7 Return Air Mixer; !- Component 1 Name AirLoopHVAC:ZoneMixer, PSZ-AC_7:7 Return Air Mixer, !- Name PSZ-AC_7:7 Zone Equipment Outlet Node, !- Outlet Node Name SMstore5 Return Air Node Name; !- Inlet 1 Node Name AirLoopHVAC, PSZ-AC_8:8, !- Name , !- Controller List Name PSZ-AC_8:8 Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} PSZ-AC_8:8 Air Loop Branches, !- Branch List Name , !- Connector List Name PSZ-AC_8:8 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name PSZ-AC_8:8 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name PSZ-AC_8:8 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names PSZ-AC_8:8 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names Sizing:System, PSZ-AC_8:8, !- AirLoop Name Sensible, !- Type of Load to Size On AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} 1.0000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 40.0, !- Central Heating Design Supply Air Temperature {C} Coincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum, !- System Outdoor Air Method 1.0, !- Zone Maximum Outdoor Air Fraction CoolingDesignCapacity, !- Cooling Design Capacity Method autosize, !- Cooling Design Capacity {W} , !- Cooling Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Cooling Design Capacity HeatingDesignCapacity, !- Heating Design Capacity Method autosize, !- Heating Design Capacity {W} , !- Heating Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Heating Design Capacity OnOff; !- Central Cooling Capacity Control Method AvailabilityManagerAssignmentList, PSZ-AC_8:8 Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type PSZ-AC_8:8 Availability Manager; !- Availability Manager 1 Name AvailabilityManager:NightCycle, PSZ-AC_8:8 Availability Manager, !- Name Always_On, !- Applicability Schedule Name Type3_FAN_SCH, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} BranchList, PSZ-AC_8:8 Air Loop Branches, !- Name PSZ-AC_8:8 Air Loop Main Branch; !- Branch 1 Name Branch, PSZ-AC_8:8 Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type PSZ-AC_8:8_OA, !- Component 1 Name PSZ-AC_8:8 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name PSZ-AC_8:8_OA-PSZ-AC_8:8_Unitary_PackageNode, !- Component 1 Outlet Node Name AirLoopHVAC:UnitarySystem, !- Component 2 Object Type PSZ-AC_8:8_Unitary_Package_DX, !- Component 2 Name PSZ-AC_8:8_OA-PSZ-AC_8:8_Unitary_PackageNode, !- Component 2 Inlet Node Name PSZ-AC_8:8 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name AirLoopHVAC:ControllerList, PSZ-AC_8:8_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type PSZ-AC_8:8_OA_Controller;!- Controller 1 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, PSZ-AC_8:8_OA_Equipment, !- Name OutdoorAir:Mixer, !- Component 1 Object Type PSZ-AC_8:8_OAMixing Box; !- Component 1 Name AirLoopHVAC:OutdoorAirSystem, PSZ-AC_8:8_OA, !- Name PSZ-AC_8:8_OA_Controllers, !- Controller List Name PSZ-AC_8:8_OA_Equipment, !- Outdoor Air Equipment List Name PSZ-AC_8:8 Availability Manager List; !- Availability Manager List Name OutdoorAir:NodeList, PSZ-AC_8:8_OANode List; !- Node or NodeList Name 1 NodeList, PSZ-AC_8:8_OANode List, !- Name PSZ-AC_8:8_OAInlet Node; !- Node 1 Name OutdoorAir:Mixer, PSZ-AC_8:8_OAMixing Box, !- Name PSZ-AC_8:8_OA-PSZ-AC_8:8_Unitary_PackageNode, !- Mixed Air Node Name PSZ-AC_8:8_OAInlet Node, !- Outdoor Air Stream Node Name PSZ-AC_8:8_OARelief Node,!- Relief Air Stream Node Name PSZ-AC_8:8 Supply Equipment Inlet Node; !- Return Air Stream Node Name SetpointManager:MixedAir, PSZ-AC_8:8_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable PSZ-AC_8:8 Supply Equipment Outlet Node, !- Reference Setpoint Node Name PSZ-AC_8:8_OA-PSZ-AC_8:8_Unitary_PackageNode, !- Fan Inlet Node Name PSZ-AC_8:8_Unitary_PackageHeatCoil air inlet, !- Fan Outlet Node Name PSZ-AC_8:8_OA-PSZ-AC_8:8_Unitary_PackageNode; !- Setpoint Node or NodeList Name Controller:OutdoorAir, PSZ-AC_8:8_OA_Controller,!- Name PSZ-AC_8:8_OARelief Node,!- Relief Air Outlet Node Name PSZ-AC_8:8 Supply Equipment Inlet Node, !- Return Air Node Name PSZ-AC_8:8_OA-PSZ-AC_8:8_Unitary_PackageNode, !- Mixed Air Node Name PSZ-AC_8:8_OAInlet Node, !- Actuator Node Name AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type 28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C} 64000.0, !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name 0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type FixedMinimum, !- Minimum Limit Type Type3_MinOA_MotorizedDamper_SCH, !- Minimum Outdoor Air Schedule Name , !- Minimum Fraction of Outdoor Air Schedule Name SZ_system_OA_Max_Frac_SCH; !- Maximum Fraction of Outdoor Air Schedule Name AirLoopHVAC:UnitarySystem, PSZ-AC_8:8_Unitary_Package_DX, !- Name Load, !- Control Type SMstore6, !- Controlling Zone or Thermostat Location None, !- Dehumidification Control Type ALWAYS_ON, !- Availability Schedule Name PSZ-AC_8:8_OA-PSZ-AC_8:8_Unitary_PackageNode, !- Air Inlet Node Name PSZ-AC_8:8 Supply Equipment Outlet Node, !- Air Outlet Node Name Fan:SystemModel, !- Supply Fan Object Type PSZ-AC_8:8_addAQ_Unitary_Package_fan, !- Supply Fan Name BlowThrough, !- Fan Placement Type3_FAN_SCH, !- Supply Air Fan Operating Mode Schedule Name Coil:Heating:Fuel, !- Heating Coil Object Type PSZ-AC_8:8_Unitary_Package_HeatCoil, !- Heating Coil Name 1, !- DX Heating Coil Sizing Ratio Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type PSZ-AC_8:8_Unitary_Package_CoolCoil, !- Cooling Coil Name No, !- Use DOAS DX Cooling Coil 2, !- Minimum Supply Air Temperature {C} SensibleOnlyLoadControl, !- Latent Load Control , !- Supplemental Heating Coil Object Type , !- Supplemental Heating Coil Name SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s} , !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- No Load Fraction of Autosized Cooling Supply Air Flow Rate , !- No Load Fraction of Autosized Heating Supply Air Flow Rate , !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W} , !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W} AUTOSIZE, !- Maximum Supply Air Temperature {C} , !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C} , !- Outdoor Dry-Bulb Temperature Sensor Node Name , !- Maximum Cycling Rate {cycles/hr} , !- Heat Pump Time Constant {s} , !- Fraction of On-Cycle Power Use , !- Heat Pump Fan Delay Time {s} , !- Ancillary On-Cycle Electric Power {W} , !- Ancillary Off-Cycle Electric Power {W} , !- Design Heat Recovery Water Flow Rate {m3/s} , !- Maximum Temperature for Heat Recovery {C} , !- Heat Recovery Water Inlet Node Name , !- Heat Recovery Water Outlet Node Name UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type PSZ-AC_8:8_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name UnitarySystemPerformance:Multispeed, PSZ-AC_8:8_Unitary_Package_DX_Perf, !- Name 2, !- Number of Speeds for Heating 2, !- Number of Speeds for Cooling No, !- Single Mode Operation 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 1 Supply Air Flow Ratio 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 2 Supply Air Flow Ratio 1; !- Cooling Speed 2 Supply Air Flow Ratio Fan:SystemModel, PSZ-AC_8:8_addAQ_Unitary_Package_fan, !- Name Type3_FAN_SCH, !- Availability Schedule Name PSZ-AC_8:8_OA-PSZ-AC_8:8_Unitary_PackageNode, !- Air Inlet Node Name PSZ-AC_8:8_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name AUTOSIZE, !- Design Maximum Air Flow Rate Discrete, !- Speed Control Method 1, !- Electric Power Minimum Flow Rate Fraction 622.5, !- Design Pressure Rise {Pa} 0.865, !- Motor Efficiency 1.0, ! Motor In Air Stream Fraction AUTOSIZE, !- Design Electric Power Consumption TotalEfficiencyAndPressure, !- Design Power Sizing Method , !- Electric Power Per Unit Flow Rate , !- Electric Power Per Unit Flow Rate Per Pressure 0.56225, !- Fan Total Efficiency , !- Electric Power Function of Flow Fraction Curve Name 622.5, !- Night Ventilation Mode Pressure Rise , !- Night Ventilation Mode Flow Fraction , !- Motor Loss Zone Name , !- Motor Loss Radiative Fraction General, !- End-Use Subcategory 2, !- Number of Speeds 0.66, !- Speed Flow Fraction 0.4, !- Electric Power Fraction 1, !- Speed Flow Fraction 1; !- Electric Power Fraction Coil:Heating:Fuel, PSZ-AC_8:8_Unitary_Package_HeatCoil, !- Name ALWAYS_ON, !- Availability Schedule Name NaturalGas, !- Fuel Type 0.81, !- Burner Efficiency AUTOSIZE, !- Nominal Capacity {W} PSZ-AC_8:8_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name PSZ-AC_8:8_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Cooling:DX:MultiSpeed, PSZ-AC_8:8_Unitary_Package_CoolCoil, !- Name ALWAYS_ON, !- Availability Schedule Name PSZ-AC_8:8_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name PSZ-AC_8:8 Supply Equipment Outlet Node, !- Air Outlet Node Name , !- Condenser Air Inlet Node Name AirCooled, !- Condenser Type , !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} , !- Supply Water Storage Tank Name , !- Condensate Collection Water Storage Tank Name No, !- Apply Part Load Fraction to Speeds Greater than 1 No, !- Apply Latent Degradation to Speeds Greater than 1 , !- Crankcase Heater Capacity {W} 10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C} , !- Basin Heater Capacity {W/K} 2, !- Basin Heater Setpoint Temperature {C} , !- Basin Heater Operating Schedule Name Electricity, !- Fuel Type 2, !- Number of Speeds 10066.91, !- Speed 1 Gross Rated Total Cooling Capacity {W} 0.68505, !- Speed 1 Gross Rated Sensible Heat Ratio 3.7988306741603, !- Speed 1 Gross Rated Cooling COP {W/W} 0.560306666666667, !- Speed 1 Rated Air Flow Rate {m3/s} 0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 1 Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolFFF, !- Speed 1 Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 1 Energy Input Ratio Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 1 Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolPLR, !- Speed 1 Part Load Fraction Correlation Curve Name , !- Speed 1 Nominal Time for Condensate Removal to Begin {s} , !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless} , !- Speed 1 Maximum Cycling Rate {cycles/hr} , !- Speed 1 Latent Capacity Time Constant {s} 0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 1 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s} , !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W} 20133.82, !- Speed 2 Gross Rated Total Cooling Capacity {W} 0.68505, !- Speed 2 Gross Rated Sensible Heat Ratio 3.7988306741603, !- Speed 2 Gross Rated Cooling COP {W/W} 0.84046, !- Speed 2 Rated Air Flow Rate {m3/s} 0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 2 Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolFFF, !- Speed 2 Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 2 Energy Input Ratio Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 2 Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolPLR, !- Speed 2 Part Load Fraction Correlation Curve Name , !- Speed 2 Nominal Time for Condensate Removal to Begin {s} , !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless} , !- Speed 2 Maximum Cycling Rate {cycles/hr} , !- Speed 2 Latent Capacity Time Constant {s} 0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 2 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s} ; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W} AirLoopHVAC:SupplyPath, PSZ-AC_8:8, !- Name PSZ-AC_8:8 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type PSZ-AC_8:8 Supply Air Splitter; !- Component 1 Name AirLoopHVAC:ZoneSplitter, PSZ-AC_8:8 Supply Air Splitter, !- Name PSZ-AC_8:8 Zone Equipment Inlet Node, !- Inlet Node Name SMstore6 Direct Air Inlet Node Name; !- Outlet 1 Node Name AirLoopHVAC:ReturnPath, PSZ-AC_8:8 Return Air Path, !- Name PSZ-AC_8:8 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type PSZ-AC_8:8 Return Air Mixer; !- Component 1 Name AirLoopHVAC:ZoneMixer, PSZ-AC_8:8 Return Air Mixer, !- Name PSZ-AC_8:8 Zone Equipment Outlet Node, !- Outlet Node Name SMstore6 Return Air Node Name; !- Inlet 1 Node Name AirLoopHVAC, PSZ-AC_9:9, !- Name , !- Controller List Name PSZ-AC_9:9 Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} PSZ-AC_9:9 Air Loop Branches, !- Branch List Name , !- Connector List Name PSZ-AC_9:9 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name PSZ-AC_9:9 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name PSZ-AC_9:9 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names PSZ-AC_9:9 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names Sizing:System, PSZ-AC_9:9, !- AirLoop Name Sensible, !- Type of Load to Size On AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} 1.0000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 40.0, !- Central Heating Design Supply Air Temperature {C} Coincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum, !- System Outdoor Air Method 1.0, !- Zone Maximum Outdoor Air Fraction CoolingDesignCapacity, !- Cooling Design Capacity Method autosize, !- Cooling Design Capacity {W} , !- Cooling Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Cooling Design Capacity HeatingDesignCapacity, !- Heating Design Capacity Method autosize, !- Heating Design Capacity {W} , !- Heating Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Heating Design Capacity OnOff; !- Central Cooling Capacity Control Method AvailabilityManagerAssignmentList, PSZ-AC_9:9 Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type PSZ-AC_9:9 Availability Manager; !- Availability Manager 1 Name AvailabilityManager:NightCycle, PSZ-AC_9:9 Availability Manager, !- Name Always_On, !- Applicability Schedule Name Type3_FAN_SCH, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} BranchList, PSZ-AC_9:9 Air Loop Branches, !- Name PSZ-AC_9:9 Air Loop Main Branch; !- Branch 1 Name Branch, PSZ-AC_9:9 Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type PSZ-AC_9:9_OA, !- Component 1 Name PSZ-AC_9:9 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name PSZ-AC_9:9_OA-PSZ-AC_9:9_Unitary_PackageNode, !- Component 1 Outlet Node Name AirLoopHVAC:UnitarySystem, !- Component 2 Object Type PSZ-AC_9:9_Unitary_Package_DX, !- Component 2 Name PSZ-AC_9:9_OA-PSZ-AC_9:9_Unitary_PackageNode, !- Component 2 Inlet Node Name PSZ-AC_9:9 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name AirLoopHVAC:ControllerList, PSZ-AC_9:9_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type PSZ-AC_9:9_OA_Controller;!- Controller 1 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, PSZ-AC_9:9_OA_Equipment, !- Name OutdoorAir:Mixer, !- Component 1 Object Type PSZ-AC_9:9_OAMixing Box; !- Component 1 Name AirLoopHVAC:OutdoorAirSystem, PSZ-AC_9:9_OA, !- Name PSZ-AC_9:9_OA_Controllers, !- Controller List Name PSZ-AC_9:9_OA_Equipment, !- Outdoor Air Equipment List Name PSZ-AC_9:9 Availability Manager List; !- Availability Manager List Name OutdoorAir:NodeList, PSZ-AC_9:9_OANode List; !- Node or NodeList Name 1 NodeList, PSZ-AC_9:9_OANode List, !- Name PSZ-AC_9:9_OAInlet Node; !- Node 1 Name OutdoorAir:Mixer, PSZ-AC_9:9_OAMixing Box, !- Name PSZ-AC_9:9_OA-PSZ-AC_9:9_Unitary_PackageNode, !- Mixed Air Node Name PSZ-AC_9:9_OAInlet Node, !- Outdoor Air Stream Node Name PSZ-AC_9:9_OARelief Node,!- Relief Air Stream Node Name PSZ-AC_9:9 Supply Equipment Inlet Node; !- Return Air Stream Node Name SetpointManager:MixedAir, PSZ-AC_9:9_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable PSZ-AC_9:9 Supply Equipment Outlet Node, !- Reference Setpoint Node Name PSZ-AC_9:9_OA-PSZ-AC_9:9_Unitary_PackageNode, !- Fan Inlet Node Name PSZ-AC_9:9_Unitary_PackageHeatCoil air inlet, !- Fan Outlet Node Name PSZ-AC_9:9_OA-PSZ-AC_9:9_Unitary_PackageNode; !- Setpoint Node or NodeList Name Controller:OutdoorAir, PSZ-AC_9:9_OA_Controller,!- Name PSZ-AC_9:9_OARelief Node,!- Relief Air Outlet Node Name PSZ-AC_9:9 Supply Equipment Inlet Node, !- Return Air Node Name PSZ-AC_9:9_OA-PSZ-AC_9:9_Unitary_PackageNode, !- Mixed Air Node Name PSZ-AC_9:9_OAInlet Node, !- Actuator Node Name AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type 28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C} 64000.0, !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name 0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type FixedMinimum, !- Minimum Limit Type Type3_MinOA_MotorizedDamper_SCH, !- Minimum Outdoor Air Schedule Name , !- Minimum Fraction of Outdoor Air Schedule Name SZ_system_OA_Max_Frac_SCH; !- Maximum Fraction of Outdoor Air Schedule Name AirLoopHVAC:UnitarySystem, PSZ-AC_9:9_Unitary_Package_DX, !- Name Load, !- Control Type SMstore7, !- Controlling Zone or Thermostat Location None, !- Dehumidification Control Type ALWAYS_ON, !- Availability Schedule Name PSZ-AC_9:9_OA-PSZ-AC_9:9_Unitary_PackageNode, !- Air Inlet Node Name PSZ-AC_9:9 Supply Equipment Outlet Node, !- Air Outlet Node Name Fan:SystemModel, !- Supply Fan Object Type PSZ-AC_9:9_addAQ_Unitary_Package_fan, !- Supply Fan Name BlowThrough, !- Fan Placement Type3_FAN_SCH, !- Supply Air Fan Operating Mode Schedule Name Coil:Heating:Fuel, !- Heating Coil Object Type PSZ-AC_9:9_Unitary_Package_HeatCoil, !- Heating Coil Name 1, !- DX Heating Coil Sizing Ratio Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type PSZ-AC_9:9_Unitary_Package_CoolCoil, !- Cooling Coil Name No, !- Use DOAS DX Cooling Coil 2, !- Minimum Supply Air Temperature {C} SensibleOnlyLoadControl, !- Latent Load Control , !- Supplemental Heating Coil Object Type , !- Supplemental Heating Coil Name SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s} , !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- No Load Fraction of Autosized Cooling Supply Air Flow Rate , !- No Load Fraction of Autosized Heating Supply Air Flow Rate , !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W} , !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W} AUTOSIZE, !- Maximum Supply Air Temperature {C} , !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C} , !- Outdoor Dry-Bulb Temperature Sensor Node Name , !- Maximum Cycling Rate {cycles/hr} , !- Heat Pump Time Constant {s} , !- Fraction of On-Cycle Power Use , !- Heat Pump Fan Delay Time {s} , !- Ancillary On-Cycle Electric Power {W} , !- Ancillary Off-Cycle Electric Power {W} , !- Design Heat Recovery Water Flow Rate {m3/s} , !- Maximum Temperature for Heat Recovery {C} , !- Heat Recovery Water Inlet Node Name , !- Heat Recovery Water Outlet Node Name UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type PSZ-AC_9:9_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name UnitarySystemPerformance:Multispeed, PSZ-AC_9:9_Unitary_Package_DX_Perf, !- Name 2, !- Number of Speeds for Heating 2, !- Number of Speeds for Cooling No, !- Single Mode Operation 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 1 Supply Air Flow Ratio 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 2 Supply Air Flow Ratio 1; !- Cooling Speed 2 Supply Air Flow Ratio Fan:SystemModel, PSZ-AC_9:9_addAQ_Unitary_Package_fan, !- Name Type3_FAN_SCH, !- Availability Schedule Name PSZ-AC_9:9_OA-PSZ-AC_9:9_Unitary_PackageNode, !- Air Inlet Node Name PSZ-AC_9:9_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name AUTOSIZE, !- Design Maximum Air Flow Rate Discrete, !- Speed Control Method 1, !- Electric Power Minimum Flow Rate Fraction 622.5, !- Design Pressure Rise {Pa} 0.865, !- Motor Efficiency 1.0, ! Motor In Air Stream Fraction AUTOSIZE, !- Design Electric Power Consumption TotalEfficiencyAndPressure, !- Design Power Sizing Method , !- Electric Power Per Unit Flow Rate , !- Electric Power Per Unit Flow Rate Per Pressure 0.56225, !- Fan Total Efficiency , !- Electric Power Function of Flow Fraction Curve Name 622.5, !- Night Ventilation Mode Pressure Rise , !- Night Ventilation Mode Flow Fraction , !- Motor Loss Zone Name , !- Motor Loss Radiative Fraction General, !- End-Use Subcategory 2, !- Number of Speeds 0.66, !- Speed Flow Fraction 0.4, !- Electric Power Fraction 1, !- Speed Flow Fraction 1; !- Electric Power Fraction Coil:Heating:Fuel, PSZ-AC_9:9_Unitary_Package_HeatCoil, !- Name ALWAYS_ON, !- Availability Schedule Name NaturalGas, !- Fuel Type 0.81, !- Burner Efficiency AUTOSIZE, !- Nominal Capacity {W} PSZ-AC_9:9_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name PSZ-AC_9:9_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Cooling:DX:MultiSpeed, PSZ-AC_9:9_Unitary_Package_CoolCoil, !- Name ALWAYS_ON, !- Availability Schedule Name PSZ-AC_9:9_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name PSZ-AC_9:9 Supply Equipment Outlet Node, !- Air Outlet Node Name , !- Condenser Air Inlet Node Name AirCooled, !- Condenser Type , !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} , !- Supply Water Storage Tank Name , !- Condensate Collection Water Storage Tank Name No, !- Apply Part Load Fraction to Speeds Greater than 1 No, !- Apply Latent Degradation to Speeds Greater than 1 , !- Crankcase Heater Capacity {W} 10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C} , !- Basin Heater Capacity {W/K} 2, !- Basin Heater Setpoint Temperature {C} , !- Basin Heater Operating Schedule Name Electricity, !- Fuel Type 2, !- Number of Speeds 10220.07, !- Speed 1 Gross Rated Total Cooling Capacity {W} 0.68399, !- Speed 1 Gross Rated Sensible Heat Ratio 3.7988306741603, !- Speed 1 Gross Rated Cooling COP {W/W} 0.566453333333333, !- Speed 1 Rated Air Flow Rate {m3/s} 0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 1 Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolFFF, !- Speed 1 Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 1 Energy Input Ratio Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 1 Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolPLR, !- Speed 1 Part Load Fraction Correlation Curve Name , !- Speed 1 Nominal Time for Condensate Removal to Begin {s} , !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless} , !- Speed 1 Maximum Cycling Rate {cycles/hr} , !- Speed 1 Latent Capacity Time Constant {s} 0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 1 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s} , !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W} 20440.14, !- Speed 2 Gross Rated Total Cooling Capacity {W} 0.68399, !- Speed 2 Gross Rated Sensible Heat Ratio 3.7988306741603, !- Speed 2 Gross Rated Cooling COP {W/W} 0.84968, !- Speed 2 Rated Air Flow Rate {m3/s} 0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 2 Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolFFF, !- Speed 2 Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 2 Energy Input Ratio Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 2 Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolPLR, !- Speed 2 Part Load Fraction Correlation Curve Name , !- Speed 2 Nominal Time for Condensate Removal to Begin {s} , !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless} , !- Speed 2 Maximum Cycling Rate {cycles/hr} , !- Speed 2 Latent Capacity Time Constant {s} 0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 2 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s} ; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W} Curve:Biquadratic, PSZ-AC_9:9_Unitary_PackagecoolCapFT, !- Name 0.766956, !- Coefficient1 Constant 0.0107756, !- Coefficient2 x -0.0000414703, !- Coefficient3 x**2 0.00134961, !- Coefficient4 y -0.000261144, !- Coefficient5 y**2 0.000457488, !- Coefficient6 x*y 12.77778, !- Minimum Value of x 23.88889, !- Maximum Value of x 21.11111, !- Minimum Value of y 46.11111; !- Maximum Value of y Curve:Biquadratic, PSZ-AC_9:9_Unitary_PackagecoolEIRFT, !- Name 0.297145, !- Coefficient1 Constant 0.0430933, !- Coefficient2 x -0.000748766, !- Coefficient3 x**2 0.00597727, !- Coefficient4 y 0.000482112, !- Coefficient5 y**2 -0.000956448, !- Coefficient6 x*y 12.77778, !- Minimum Value of x 23.88889, !- Maximum Value of x 21.11111, !- Minimum Value of y 46.11111; !- Maximum Value of y Curve:Quadratic, PSZ-AC_9:9_Unitary_PackagecoolFFF, !- Name 0.8, !- Coefficient1 Constant 0.2, !- Coefficient2 x 0.0, !- Coefficient3 x**2 0.5, !- Minimum Value of x 1.5; !- Maximum Value of x Curve:Quadratic, PSZ-AC_9:9_Unitary_PackagecoolEIRFFF, !- Name 1.156, !- Coefficient1 Constant -0.1816, !- Coefficient2 x 0.0256, !- Coefficient3 x**2 0.5, !- Minimum Value of x 1.5; !- Maximum Value of x Curve:Quadratic, PSZ-AC_9:9_Unitary_PackagecoolPLR, !- Name 0.75, !- Coefficient1 Constant 0.25, !- Coefficient2 x 0.0, !- Coefficient3 x**2 0.0, !- Minimum Value of x 1.0; !- Maximum Value of x AirLoopHVAC:SupplyPath, PSZ-AC_9:9, !- Name PSZ-AC_9:9 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type PSZ-AC_9:9 Supply Air Splitter; !- Component 1 Name AirLoopHVAC:ZoneSplitter, PSZ-AC_9:9 Supply Air Splitter, !- Name PSZ-AC_9:9 Zone Equipment Inlet Node, !- Inlet Node Name SMstore7 Direct Air Inlet Node Name; !- Outlet 1 Node Name AirLoopHVAC:ReturnPath, PSZ-AC_9:9 Return Air Path, !- Name PSZ-AC_9:9 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type PSZ-AC_9:9 Return Air Mixer; !- Component 1 Name AirLoopHVAC:ZoneMixer, PSZ-AC_9:9 Return Air Mixer, !- Name PSZ-AC_9:9 Zone Equipment Outlet Node, !- Outlet Node Name SMstore7 Return Air Node Name; !- Inlet 1 Node Name AirLoopHVAC, PSZ-AC_10:10, !- Name , !- Controller List Name PSZ-AC_10:10 Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} PSZ-AC_10:10 Air Loop Branches, !- Branch List Name , !- Connector List Name PSZ-AC_10:10 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name PSZ-AC_10:10 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name PSZ-AC_10:10 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names PSZ-AC_10:10 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names Sizing:System, PSZ-AC_10:10, !- AirLoop Name Sensible, !- Type of Load to Size On AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} 1.0000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 40.0, !- Central Heating Design Supply Air Temperature {C} Coincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum, !- System Outdoor Air Method 1.0, !- Zone Maximum Outdoor Air Fraction CoolingDesignCapacity, !- Cooling Design Capacity Method autosize, !- Cooling Design Capacity {W} , !- Cooling Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Cooling Design Capacity HeatingDesignCapacity, !- Heating Design Capacity Method autosize, !- Heating Design Capacity {W} , !- Heating Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Heating Design Capacity OnOff; !- Central Cooling Capacity Control Method AvailabilityManagerAssignmentList, PSZ-AC_10:10 Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type PSZ-AC_10:10 Availability Manager; !- Availability Manager 1 Name AvailabilityManager:NightCycle, PSZ-AC_10:10 Availability Manager, !- Name Always_On, !- Applicability Schedule Name Type3_FAN_SCH, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} BranchList, PSZ-AC_10:10 Air Loop Branches, !- Name PSZ-AC_10:10 Air Loop Main Branch; !- Branch 1 Name Branch, PSZ-AC_10:10 Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type PSZ-AC_10:10_OA, !- Component 1 Name PSZ-AC_10:10 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name PSZ-AC_10:10_OA-PSZ-AC_10:10_Unitary_PackageNode, !- Component 1 Outlet Node Name AirLoopHVAC:UnitarySystem, !- Component 2 Object Type PSZ-AC_10:10_Unitary_Package_DX, !- Component 2 Name PSZ-AC_10:10_OA-PSZ-AC_10:10_Unitary_PackageNode, !- Component 2 Inlet Node Name PSZ-AC_10:10 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name AirLoopHVAC:ControllerList, PSZ-AC_10:10_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type PSZ-AC_10:10_OA_Controller; !- Controller 1 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, PSZ-AC_10:10_OA_Equipment, !- Name OutdoorAir:Mixer, !- Component 1 Object Type PSZ-AC_10:10_OAMixing Box; !- Component 1 Name AirLoopHVAC:OutdoorAirSystem, PSZ-AC_10:10_OA, !- Name PSZ-AC_10:10_OA_Controllers, !- Controller List Name PSZ-AC_10:10_OA_Equipment, !- Outdoor Air Equipment List Name PSZ-AC_10:10 Availability Manager List; !- Availability Manager List Name OutdoorAir:NodeList, PSZ-AC_10:10_OANode List;!- Node or NodeList Name 1 NodeList, PSZ-AC_10:10_OANode List,!- Name PSZ-AC_10:10_OAInlet Node; !- Node 1 Name OutdoorAir:Mixer, PSZ-AC_10:10_OAMixing Box, !- Name PSZ-AC_10:10_OA-PSZ-AC_10:10_Unitary_PackageNode, !- Mixed Air Node Name PSZ-AC_10:10_OAInlet Node, !- Outdoor Air Stream Node Name PSZ-AC_10:10_OARelief Node, !- Relief Air Stream Node Name PSZ-AC_10:10 Supply Equipment Inlet Node; !- Return Air Stream Node Name SetpointManager:MixedAir, PSZ-AC_10:10_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable PSZ-AC_10:10 Supply Equipment Outlet Node, !- Reference Setpoint Node Name PSZ-AC_10:10_OA-PSZ-AC_10:10_Unitary_PackageNode, !- Fan Inlet Node Name PSZ-AC_10:10_Unitary_PackageHeatCoil air inlet, !- Fan Outlet Node Name PSZ-AC_10:10_OA-PSZ-AC_10:10_Unitary_PackageNode; !- Setpoint Node or NodeList Name Controller:OutdoorAir, PSZ-AC_10:10_OA_Controller, !- Name PSZ-AC_10:10_OARelief Node, !- Relief Air Outlet Node Name PSZ-AC_10:10 Supply Equipment Inlet Node, !- Return Air Node Name PSZ-AC_10:10_OA-PSZ-AC_10:10_Unitary_PackageNode, !- Mixed Air Node Name PSZ-AC_10:10_OAInlet Node, !- Actuator Node Name AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type 28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C} 64000.0, !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name 0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type FixedMinimum, !- Minimum Limit Type Type3_MinOA_MotorizedDamper_SCH, !- Minimum Outdoor Air Schedule Name , !- Minimum Fraction of Outdoor Air Schedule Name SZ_system_OA_Max_Frac_SCH; !- Maximum Fraction of Outdoor Air Schedule Name AirLoopHVAC:UnitarySystem, PSZ-AC_10:10_Unitary_Package_DX, !- Name Load, !- Control Type SMstore8, !- Controlling Zone or Thermostat Location None, !- Dehumidification Control Type ALWAYS_ON, !- Availability Schedule Name PSZ-AC_10:10_OA-PSZ-AC_10:10_Unitary_PackageNode, !- Air Inlet Node Name PSZ-AC_10:10 Supply Equipment Outlet Node, !- Air Outlet Node Name Fan:SystemModel, !- Supply Fan Object Type PSZ-AC_10:10_addAQ_Unitary_Package_fan, !- Supply Fan Name BlowThrough, !- Fan Placement Type3_FAN_SCH, !- Supply Air Fan Operating Mode Schedule Name Coil:Heating:Fuel, !- Heating Coil Object Type PSZ-AC_10:10_Unitary_Package_HeatCoil, !- Heating Coil Name 1, !- DX Heating Coil Sizing Ratio Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type PSZ-AC_10:10_Unitary_Package_CoolCoil, !- Cooling Coil Name No, !- Use DOAS DX Cooling Coil 2, !- Minimum Supply Air Temperature {C} SensibleOnlyLoadControl, !- Latent Load Control , !- Supplemental Heating Coil Object Type , !- Supplemental Heating Coil Name SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s} , !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- No Load Fraction of Autosized Cooling Supply Air Flow Rate , !- No Load Fraction of Autosized Heating Supply Air Flow Rate , !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W} , !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W} AUTOSIZE, !- Maximum Supply Air Temperature {C} , !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C} , !- Outdoor Dry-Bulb Temperature Sensor Node Name , !- Maximum Cycling Rate {cycles/hr} , !- Heat Pump Time Constant {s} , !- Fraction of On-Cycle Power Use , !- Heat Pump Fan Delay Time {s} , !- Ancillary On-Cycle Electric Power {W} , !- Ancillary Off-Cycle Electric Power {W} , !- Design Heat Recovery Water Flow Rate {m3/s} , !- Maximum Temperature for Heat Recovery {C} , !- Heat Recovery Water Inlet Node Name , !- Heat Recovery Water Outlet Node Name UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type PSZ-AC_10:10_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name UnitarySystemPerformance:Multispeed, PSZ-AC_10:10_Unitary_Package_DX_Perf, !- Name 2, !- Number of Speeds for Heating 2, !- Number of Speeds for Cooling No, !- Single Mode Operation 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 1 Supply Air Flow Ratio 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 2 Supply Air Flow Ratio 1; !- Cooling Speed 2 Supply Air Flow Ratio Fan:SystemModel, PSZ-AC_10:10_addAQ_Unitary_Package_fan, !- Name Type3_FAN_SCH, !- Availability Schedule Name PSZ-AC_10:10_OA-PSZ-AC_10:10_Unitary_PackageNode, !- Air Inlet Node Name PSZ-AC_10:10_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name AUTOSIZE, !- Design Maximum Air Flow Rate Discrete, !- Speed Control Method 1, !- Electric Power Minimum Flow Rate Fraction 622.5, !- Design Pressure Rise {Pa} 0.865, !- Motor Efficiency 1.0, ! Motor In Air Stream Fraction AUTOSIZE, !- Design Electric Power Consumption TotalEfficiencyAndPressure, !- Design Power Sizing Method , !- Electric Power Per Unit Flow Rate , !- Electric Power Per Unit Flow Rate Per Pressure 0.56225, !- Fan Total Efficiency , !- Electric Power Function of Flow Fraction Curve Name 622.5, !- Night Ventilation Mode Pressure Rise , !- Night Ventilation Mode Flow Fraction , !- Motor Loss Zone Name , !- Motor Loss Radiative Fraction General, !- End-Use Subcategory 2, !- Number of Speeds 0.66, !- Speed Flow Fraction 0.4, !- Electric Power Fraction 1, !- Speed Flow Fraction 1; !- Electric Power Fraction Coil:Heating:Fuel, PSZ-AC_10:10_Unitary_Package_HeatCoil, !- Name ALWAYS_ON, !- Availability Schedule Name NaturalGas, !- Fuel Type 0.81, !- Burner Efficiency AUTOSIZE, !- Nominal Capacity {W} PSZ-AC_10:10_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name PSZ-AC_10:10_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Cooling:DX:MultiSpeed, PSZ-AC_10:10_Unitary_Package_CoolCoil, !- Name ALWAYS_ON, !- Availability Schedule Name PSZ-AC_10:10_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name PSZ-AC_10:10 Supply Equipment Outlet Node, !- Air Outlet Node Name , !- Condenser Air Inlet Node Name AirCooled, !- Condenser Type , !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} , !- Supply Water Storage Tank Name , !- Condensate Collection Water Storage Tank Name No, !- Apply Part Load Fraction to Speeds Greater than 1 No, !- Apply Latent Degradation to Speeds Greater than 1 , !- Crankcase Heater Capacity {W} 10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C} , !- Basin Heater Capacity {W/K} 2, !- Basin Heater Setpoint Temperature {C} , !- Basin Heater Operating Schedule Name Electricity, !- Fuel Type 2, !- Number of Speeds 11509.965, !- Speed 1 Gross Rated Total Cooling Capacity {W} 0.68430, !- Speed 1 Gross Rated Sensible Heat Ratio 3.7988306741603, !- Speed 1 Gross Rated Cooling COP {W/W} 0.63874, !- Speed 1 Rated Air Flow Rate {m3/s} 0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 1 Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolFFF, !- Speed 1 Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 1 Energy Input Ratio Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 1 Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolPLR, !- Speed 1 Part Load Fraction Correlation Curve Name , !- Speed 1 Nominal Time for Condensate Removal to Begin {s} , !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless} , !- Speed 1 Maximum Cycling Rate {cycles/hr} , !- Speed 1 Latent Capacity Time Constant {s} 0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 1 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s} , !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W} 23019.93, !- Speed 2 Gross Rated Total Cooling Capacity {W} 0.68430, !- Speed 2 Gross Rated Sensible Heat Ratio 3.7988306741603, !- Speed 2 Gross Rated Cooling COP {W/W} 0.95811, !- Speed 2 Rated Air Flow Rate {m3/s} 0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 2 Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolFFF, !- Speed 2 Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 2 Energy Input Ratio Function of Temperature Curve Name PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 2 Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_Unitary_PackagecoolPLR, !- Speed 2 Part Load Fraction Correlation Curve Name , !- Speed 2 Nominal Time for Condensate Removal to Begin {s} , !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless} , !- Speed 2 Maximum Cycling Rate {cycles/hr} , !- Speed 2 Latent Capacity Time Constant {s} 0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 2 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s} ; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W} Curve:Biquadratic, PSZ-AC_10:10_Unitary_PackagecoolCapFT, !- Name 0.766956, !- Coefficient1 Constant 0.0107756, !- Coefficient2 x -0.0000414703, !- Coefficient3 x**2 0.00134961, !- Coefficient4 y -0.000261144, !- Coefficient5 y**2 0.000457488, !- Coefficient6 x*y 12.77778, !- Minimum Value of x 23.88889, !- Maximum Value of x 21.11111, !- Minimum Value of y 46.11111; !- Maximum Value of y Curve:Biquadratic, PSZ-AC_10:10_Unitary_PackagecoolEIRFT, !- Name 0.297145, !- Coefficient1 Constant 0.0430933, !- Coefficient2 x -0.000748766, !- Coefficient3 x**2 0.00597727, !- Coefficient4 y 0.000482112, !- Coefficient5 y**2 -0.000956448, !- Coefficient6 x*y 12.77778, !- Minimum Value of x 23.88889, !- Maximum Value of x 21.11111, !- Minimum Value of y 46.11111; !- Maximum Value of y Curve:Quadratic, PSZ-AC_10:10_Unitary_PackagecoolFFF, !- Name 0.8, !- Coefficient1 Constant 0.2, !- Coefficient2 x 0.0, !- Coefficient3 x**2 0.5, !- Minimum Value of x 1.5; !- Maximum Value of x Curve:Quadratic, PSZ-AC_10:10_Unitary_PackagecoolEIRFFF, !- Name 1.156, !- Coefficient1 Constant -0.1816, !- Coefficient2 x 0.0256, !- Coefficient3 x**2 0.5, !- Minimum Value of x 1.5; !- Maximum Value of x Curve:Quadratic, PSZ-AC_10:10_Unitary_PackagecoolPLR, !- Name 0.75, !- Coefficient1 Constant 0.25, !- Coefficient2 x 0.0, !- Coefficient3 x**2 0.0, !- Minimum Value of x 1.0; !- Maximum Value of x AirLoopHVAC:SupplyPath, PSZ-AC_10:10, !- Name PSZ-AC_10:10 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type PSZ-AC_10:10 Supply Air Splitter; !- Component 1 Name AirLoopHVAC:ZoneSplitter, PSZ-AC_10:10 Supply Air Splitter, !- Name PSZ-AC_10:10 Zone Equipment Inlet Node, !- Inlet Node Name SMstore8 Direct Air Inlet Node Name; !- Outlet 1 Node Name AirLoopHVAC:ReturnPath, PSZ-AC_10:10 Return Air Path, !- Name PSZ-AC_10:10 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type PSZ-AC_10:10 Return Air Mixer; !- Component 1 Name AirLoopHVAC:ZoneMixer, PSZ-AC_10:10 Return Air Mixer, !- Name PSZ-AC_10:10 Zone Equipment Outlet Node, !- Outlet Node Name SMstore8 Return Air Node Name; !- Inlet 1 Node Name !- =========== ALL OBJECTS IN CLASS: WATER HEATER:MIXED =========== WaterHeater:Mixed, Gas Tank1, !- Name 0.1514, !- Tank Volume {m3} Hot Water Setpoint Temp Schedule, !- Setpoint Temperature Schedule Name 2.00000005298191, !- Deadband Temperature Difference {deltaC} 82.2222244003673, !- Maximum Temperature Limit {C} Cycle, !- Heater Control Type 11722.84, !- Heater Maximum Capacity {W} 0, !- Heater Minimum Capacity {W} , !- Heater Ignition Minimum Flow Rate {m3/s} , !- Heater Ignition Delay {s} Electricity, !- Heater Fuel Type 1, !- Heater Thermal Efficiency , !- Part Load Factor Curve Name 173, !- Off Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 31, 2012 Specify pipe loss for both Off and On cycle parasitic Electricity, !- Off Cycle Parasitic Fuel Type 0, !- Off Cycle Parasitic Heat Fraction to Tank 173, !- On Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 2, 2012: change from blank to 72 btu/h (21.20 W) , !- On Cycle Parasitic Fuel Type , !- On Cycle Parasitic Heat Fraction to Tank Zone, !- Ambient Temperature Indicator , !- Ambient Temperature Schedule Name LGstore1, !- Ambient Temperature Zone Name , !- Ambient Temperature Outdoor Air Node Name 1.205980747, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K} , !- Off Cycle Loss Fraction to Zone 1.205980747, !- On Cycle Loss Coefficient to Ambient Temperature {W/K} , !- On Cycle Loss Fraction to Zone 1.89e-06, !- Peak Use Flow Rate {m3/s} Type1_SWH_SCH; !- Use Flow Rate Fraction Schedule Name !- =========== ALL OBJECTS IN CLASS: WATER HEATER:MIXED =========== WaterHeater:Mixed, Gas Tank2, !- Name 0.1514, !- Tank Volume {m3} Hot Water Setpoint Temp Schedule, !- Setpoint Temperature Schedule Name 2.00000005298191, !- Deadband Temperature Difference {deltaC} 82.2222244003673, !- Maximum Temperature Limit {C} Cycle, !- Heater Control Type 11722.84, !- Heater Maximum Capacity {W} 0, !- Heater Minimum Capacity {W} , !- Heater Ignition Minimum Flow Rate {m3/s} , !- Heater Ignition Delay {s} Electricity, !- Heater Fuel Type 1, !- Heater Thermal Efficiency , !- Part Load Factor Curve Name 173, !- Off Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 31, 2012 Specify pipe loss for both Off and On cycle parasitic Electricity, !- Off Cycle Parasitic Fuel Type 0, !- Off Cycle Parasitic Heat Fraction to Tank 173, !- On Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 2, 2012: change from blank to 72 btu/h (21.20 W) , !- On Cycle Parasitic Fuel Type , !- On Cycle Parasitic Heat Fraction to Tank Zone, !- Ambient Temperature Indicator , !- Ambient Temperature Schedule Name SMstore1, !- Ambient Temperature Zone Name , !- Ambient Temperature Outdoor Air Node Name 1.205980747, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K} , !- Off Cycle Loss Fraction to Zone 1.205980747, !- On Cycle Loss Coefficient to Ambient Temperature {W/K} , !- On Cycle Loss Fraction to Zone 1.89e-06, !- Peak Use Flow Rate {m3/s} Type1_SWH_SCH; !- Use Flow Rate Fraction Schedule Name !- =========== ALL OBJECTS IN CLASS: WATER HEATER:MIXED =========== WaterHeater:Mixed, Gas Tank3, !- Name 0.1514, !- Tank Volume {m3} Hot Water Setpoint Temp Schedule, !- Setpoint Temperature Schedule Name 2.00000005298191, !- Deadband Temperature Difference {deltaC} 82.2222244003673, !- Maximum Temperature Limit {C} Cycle, !- Heater Control Type 11722.84, !- Heater Maximum Capacity {W} 0, !- Heater Minimum Capacity {W} , !- Heater Ignition Minimum Flow Rate {m3/s} , !- Heater Ignition Delay {s} Electricity, !- Heater Fuel Type 1, !- Heater Thermal Efficiency , !- Part Load Factor Curve Name 173, !- Off Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 31, 2012 Specify pipe loss for both Off and On cycle parasitic Electricity, !- Off Cycle Parasitic Fuel Type 0, !- Off Cycle Parasitic Heat Fraction to Tank 173, !- On Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 2, 2012: change from blank to 72 btu/h (21.20 W) , !- On Cycle Parasitic Fuel Type , !- On Cycle Parasitic Heat Fraction to Tank Zone, !- Ambient Temperature Indicator , !- Ambient Temperature Schedule Name SMstore2, !- Ambient Temperature Zone Name , !- Ambient Temperature Outdoor Air Node Name 1.205980747, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K} , !- Off Cycle Loss Fraction to Zone 1.205980747, !- On Cycle Loss Coefficient to Ambient Temperature {W/K} , !- On Cycle Loss Fraction to Zone 1.89e-06, !- Peak Use Flow Rate {m3/s} Type2_SWH_SCH; !- Use Flow Rate Fraction Schedule Name !- =========== ALL OBJECTS IN CLASS: WATER HEATER:MIXED =========== WaterHeater:Mixed, Gas Tank4, !- Name 0.1514, !- Tank Volume {m3} Hot Water Setpoint Temp Schedule, !- Setpoint Temperature Schedule Name 2.00000005298191, !- Deadband Temperature Difference {deltaC} 82.2222244003673, !- Maximum Temperature Limit {C} Cycle, !- Heater Control Type 11722.84, !- Heater Maximum Capacity {W} 0, !- Heater Minimum Capacity {W} , !- Heater Ignition Minimum Flow Rate {m3/s} , !- Heater Ignition Delay {s} Electricity, !- Heater Fuel Type 1, !- Heater Thermal Efficiency , !- Part Load Factor Curve Name 173, !- Off Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 31, 2012 Specify pipe loss for both Off and On cycle parasitic Electricity, !- Off Cycle Parasitic Fuel Type 0, !- Off Cycle Parasitic Heat Fraction to Tank 173, !- On Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 2, 2012: change from blank to 72 btu/h (21.20 W) , !- On Cycle Parasitic Fuel Type , !- On Cycle Parasitic Heat Fraction to Tank Zone, !- Ambient Temperature Indicator , !- Ambient Temperature Schedule Name SMstore3, !- Ambient Temperature Zone Name , !- Ambient Temperature Outdoor Air Node Name 1.205980747, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K} , !- Off Cycle Loss Fraction to Zone 1.205980747, !- On Cycle Loss Coefficient to Ambient Temperature {W/K} , !- On Cycle Loss Fraction to Zone 1.89e-06, !- Peak Use Flow Rate {m3/s} Type2_SWH_SCH; !- Use Flow Rate Fraction Schedule Name !- =========== ALL OBJECTS IN CLASS: WATER HEATER:MIXED =========== WaterHeater:Mixed, Gas Tank5, !- Name 0.1514, !- Tank Volume {m3} Hot Water Setpoint Temp Schedule, !- Setpoint Temperature Schedule Name 2.00000005298191, !- Deadband Temperature Difference {deltaC} 82.2222244003673, !- Maximum Temperature Limit {C} Cycle, !- Heater Control Type 11722.84, !- Heater Maximum Capacity {W} 0, !- Heater Minimum Capacity {W} , !- Heater Ignition Minimum Flow Rate {m3/s} , !- Heater Ignition Delay {s} Electricity, !- Heater Fuel Type 1, !- Heater Thermal Efficiency , !- Part Load Factor Curve Name 173, !- Off Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 31, 2012 Specify pipe loss for both Off and On cycle parasitic Electricity, !- Off Cycle Parasitic Fuel Type 0, !- Off Cycle Parasitic Heat Fraction to Tank 173, !- On Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 2, 2012: change from blank to 72 btu/h (21.20 W) , !- On Cycle Parasitic Fuel Type , !- On Cycle Parasitic Heat Fraction to Tank Zone, !- Ambient Temperature Indicator , !- Ambient Temperature Schedule Name LGstore2, !- Ambient Temperature Zone Name , !- Ambient Temperature Outdoor Air Node Name 1.205980747, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K} , !- Off Cycle Loss Fraction to Zone 1.205980747, !- On Cycle Loss Coefficient to Ambient Temperature {W/K} , !- On Cycle Loss Fraction to Zone 1.89e-06, !- Peak Use Flow Rate {m3/s} Type3_SWH_SCH; !- Use Flow Rate Fraction Schedule Name !- =========== ALL OBJECTS IN CLASS: WATER HEATER:MIXED =========== WaterHeater:Mixed, Gas Tank6, !- Name 0.1514, !- Tank Volume {m3} Hot Water Setpoint Temp Schedule, !- Setpoint Temperature Schedule Name 2.00000005298191, !- Deadband Temperature Difference {deltaC} 82.2222244003673, !- Maximum Temperature Limit {C} Cycle, !- Heater Control Type 11722.84, !- Heater Maximum Capacity {W} 0, !- Heater Minimum Capacity {W} , !- Heater Ignition Minimum Flow Rate {m3/s} , !- Heater Ignition Delay {s} Electricity, !- Heater Fuel Type 1, !- Heater Thermal Efficiency , !- Part Load Factor Curve Name 173, !- Off Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 31, 2012 Specify pipe loss for both Off and On cycle parasitic Electricity, !- Off Cycle Parasitic Fuel Type 0, !- Off Cycle Parasitic Heat Fraction to Tank 173, !- On Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 2, 2012: change from blank to 72 btu/h (21.20 W) , !- On Cycle Parasitic Fuel Type , !- On Cycle Parasitic Heat Fraction to Tank Zone, !- Ambient Temperature Indicator , !- Ambient Temperature Schedule Name SMstore5, !- Ambient Temperature Zone Name , !- Ambient Temperature Outdoor Air Node Name 1.205980747, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K} , !- Off Cycle Loss Fraction to Zone 1.205980747, !- On Cycle Loss Coefficient to Ambient Temperature {W/K} , !- On Cycle Loss Fraction to Zone 1.89e-06, !- Peak Use Flow Rate {m3/s} Type3_SWH_SCH; !- Use Flow Rate Fraction Schedule Name !- =========== ALL OBJECTS IN CLASS: WATER HEATER:MIXED =========== WaterHeater:Mixed, Gas Tank7, !- Name 0.1514, !- Tank Volume {m3} Hot Water Setpoint Temp Schedule, !- Setpoint Temperature Schedule Name 2.00000005298191, !- Deadband Temperature Difference {deltaC} 82.2222244003673, !- Maximum Temperature Limit {C} Cycle, !- Heater Control Type 11722.84, !- Heater Maximum Capacity {W} 0, !- Heater Minimum Capacity {W} , !- Heater Ignition Minimum Flow Rate {m3/s} , !- Heater Ignition Delay {s} Electricity, !- Heater Fuel Type 1, !- Heater Thermal Efficiency , !- Part Load Factor Curve Name 173, !- Off Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 31, 2012 Specify pipe loss for both Off and On cycle parasitic Electricity, !- Off Cycle Parasitic Fuel Type 0, !- Off Cycle Parasitic Heat Fraction to Tank 173, !- On Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 2, 2012: change from blank to 72 btu/h (21.20 W) , !- On Cycle Parasitic Fuel Type , !- On Cycle Parasitic Heat Fraction to Tank Zone, !- Ambient Temperature Indicator , !- Ambient Temperature Schedule Name SMstore6, !- Ambient Temperature Zone Name , !- Ambient Temperature Outdoor Air Node Name 1.205980747, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K} , !- Off Cycle Loss Fraction to Zone 1.205980747, !- On Cycle Loss Coefficient to Ambient Temperature {W/K} , !- On Cycle Loss Fraction to Zone 1.89e-06, !- Peak Use Flow Rate {m3/s} Type3_SWH_SCH; !- Use Flow Rate Fraction Schedule Name Exterior:Lights, Exterior_Lights_a, !- Name Exterior_lighting_schedule_a, !- Schedule Name 418.4, !- Design Level {W} AstronomicalClock, !- Control Option General; !- End-Use Subcategory Exterior:Lights, Exterior_Lights_b, !- Name Exterior_lighting_schedule_b_2016, !- Schedule Name 2520.304746, !- Design Level {W} AstronomicalClock, !- Control Option General; !- End-Use Subcategory Exterior:Lights, Exterior_Lights_c, !- Name Exterior_lighting_schedule_c_2016, !- Schedule Name 2520.304746, !- Design Level {W} AstronomicalClock, !- Control Option General; !- End-Use Subcategory Schedule:Compact, Exterior_lighting_schedule_a, !- Name fraction, !- Schedule Type Limits Name Through:12/31, !- Field 1 For:AllDays, !- Field 2 Until: 06:00,0, !- Field 3 Until: 24:00,1; !- Field 5 Schedule:Compact, Exterior_lighting_schedule_b, !- Name fraction, !- Schedule Type Limits Name Through:12/31, !- Field 1 For:AllDays, !- Field 2 Until: 06:00,0.7, !- Field 3 Until: 24:00,1; !- Field 5 Schedule:Compact, Exterior_lighting_schedule_a_IECC2015, !- Name fraction, !- Schedule Type Limits Name Through:12/31, !- Field 1 For:Weekdays SummerDesignDay, !- Field 2 Until: 08:00,0, !- Field 3 Until: 24:00,1, !- Field 5 For:Saturdays, !- Field 7 Until: 01:00,1, !- Field 8 Until: 08:00,0, !- Field 10 Until: 24:00,1, !- Field 12 For:AllOtherDays, !- Field 14 Until: 9:00,0, !- Field 15 Until: 24:00,1; !- Field 17 Schedule:Compact, Exterior_lighting_schedule_b_2016, !- Name fraction, !- Schedule Type Limits Name Through:12/31, !- Field 1 For:AllDays, !- Field 2 Until: 06:00,0.5, !- Field 3 Until: 24:00,1; !- Field 5 Schedule:Compact, Exterior_lighting_schedule_c_2016, !- Name fraction, !- Schedule Type Limits Name Through:12/31, !- Field 1 For:AllDays, !- Field 2 Until: 06:00,0.5, !- Field 3 Until: 22:00,1, !- Field 5 Until: 24:00,0.5; !- Field 7 !No PV for this case !- =========== ALL OBJECTS IN CLASS: OUTPUT:REPORTS =========== Output:Surfaces:Drawing,DXF; Output:Surfaces:List,Details; Output:VariableDictionary,IDF; Output:Constructions,Constructions; OutputControl:Table:Style, CommaAndHTML; !- Column Separator !- =========== ALL OBJECTS IN CLASS: OUTPUTCONTROL:REPORTINGTOLERANCES =========== Output:Meter:MeterFileOnly,Electricity:Facility,Hourly; Output:Meter:MeterFileOnly,ElectricityNet:Facility,Hourly; Output:Meter:MeterFileOnly,Gas:Facility,Hourly; OutputControl:ReportingTolerances, 0.556, !- Tolerance for Time Heating Setpoint Not Met {deltaC} 0.556; !- Tolerance for Time Cooling Setpoint Not Met {deltaC} Output:Table:SummaryReports, AllSummaryAndMonthly; !- Report 1 Name Output:Table:Monthly, NameHolderMonthlySummary TaskPurpose ProgressIndicator, !- Name ProgressIndicator,ForDetermination2019, ... 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary CodeName ASHRAE901, !- Name ASHRAE901, ASHRAE1891, IECC, Title24, ORSC, IGCC, ... 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary CodeYear 2019, !- Name all years for ASHRAE90.1, IECC, ASHRAE189.1 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary CodeAmendment NoneAmend, !- Name StateAmend,EEM, NoneAmend for national or state without amendment 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary PrototypeName RetailStripmall, !- Name 16 Prototypes 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary TaskScope National, !- Name National, State, City 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary State National, !- Name National for national analysis, NewYork, Utah,... for state analysis, or city name for city analysis. Spell out the name of the state without space between words 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary ClimateZone 6A, !- Name 0-8 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary RepresentCity USA_MN_Rochester, !- Name representative city like Honolulu for national, for each state, for city analysis. this is not the city of the weather file. The weather city will be extracted from epw file 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 !- =========== ALL OBJECTS IN CLASS: OUTPUT:VARIABLE =========== ! ! Site ! ! Output:Variable,*,Site Outdoor Air Drybulb Temperature,Hourly; ! ! Output:Variable,*,Site Outdoor Air Wetbulb Temperature,Hourly; ! ! Output:Variable,Type1_FAN_SCH,Schedule Value,Hourly; ! ! Output:Variable,Type2_FAN_SCH,Schedule Value,Hourly; ! ! Output:Variable,Type3_FAN_SCH,Schedule Value,Hourly; ! ! ! Outdoor air ! ! Output:Variable,PSZ-AC_1:1_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_2:2_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_3:3_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_4:4_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_5:5_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_6:6_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_7:7_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_8:8_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_9:9_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_10:10_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! ! Return Air ! ! Output:Variable,PSZ-AC_1:1 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_2:2 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_3:3 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_4:4 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_5:5 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_6:6 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_7:7 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_8:8 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_9:9 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_10:10 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_1:1 Supply Equipment Inlet Node,System Node Temperature,Hourly; ! ! Output:Variable,PSZ-AC_2:2 Supply Equipment Inlet Node,System Node Temperature,Hourly; ! ! Output:Variable,PSZ-AC_3:3 Supply Equipment Inlet Node,System Node Temperature,Hourly; ! ! Output:Variable,PSZ-AC_4:4 Supply Equipment Inlet Node,System Node Temperature,Hourly; ! ! Output:Variable,PSZ-AC_5:5 Supply Equipment Inlet Node,System Node Temperature,Hourly; ! ! Output:Variable,PSZ-AC_6:6 Supply Equipment Inlet Node,System Node Temperature,Hourly; ! ! Output:Variable,PSZ-AC_7:7 Supply Equipment Inlet Node,System Node Temperature,Hourly; ! ! Output:Variable,PSZ-AC_8:8 Supply Equipment Inlet Node,System Node Temperature,Hourly; ! ! Output:Variable,PSZ-AC_9:9 Supply Equipment Inlet Node,System Node Temperature,Hourly; ! ! Output:Variable,PSZ-AC_10:10 Supply Equipment Inlet Node,System Node Temperature,Hourly; ! ! Output:Variable,PSZ-AC_1:1 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! ! Output:Variable,PSZ-AC_2:2 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! ! Output:Variable,PSZ-AC_3:3 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! ! Output:Variable,PSZ-AC_4:4 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! ! Output:Variable,PSZ-AC_5:5 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! ! Output:Variable,PSZ-AC_6:6 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! ! Output:Variable,PSZ-AC_7:7 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! ! Output:Variable,PSZ-AC_8:8 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! ! Output:Variable,PSZ-AC_9:9 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! ! Output:Variable,PSZ-AC_10:10 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! ! ! Supply Air ! ! Output:Variable,PSZ-AC_1:1 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_2:2 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_3:3 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_4:4 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_5:5 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_6:6 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_7:7 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_8:8 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_9:9 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_10:10 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! Output:Variable,PSZ-AC_1:1 Supply Equipment Outlet Node,System Node Temperature,Hourly; ! ! Output:Variable,PSZ-AC_2:2 Supply Equipment Outlet Node,System Node Temperature,Hourly; ! ! Output:Variable,PSZ-AC_3:3 Supply Equipment Outlet Node,System Node Temperature,Hourly; ! ! Output:Variable,PSZ-AC_4:4 Supply Equipment Outlet Node,System Node Temperature,Hourly; ! ! Output:Variable,PSZ-AC_5:5 Supply Equipment Outlet Node,System Node Temperature,Hourly; ! ! Output:Variable,PSZ-AC_6:6 Supply Equipment Outlet Node,System Node Temperature,Hourly; ! ! Output:Variable,PSZ-AC_7:7 Supply Equipment Outlet Node,System Node Temperature,Hourly; ! ! Output:Variable,PSZ-AC_8:8 Supply Equipment Outlet Node,System Node Temperature,Hourly; ! ! Output:Variable,PSZ-AC_9:9 Supply Equipment Outlet Node,System Node Temperature,Hourly; ! ! Output:Variable,PSZ-AC_10:10 Supply Equipment Outlet Node,System Node Temperature,Hourly; ! ! Output:Variable,PSZ-AC_1:1 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! ! Output:Variable,PSZ-AC_2:2 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! ! Output:Variable,PSZ-AC_3:3 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! ! Output:Variable,PSZ-AC_4:4 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! ! Output:Variable,PSZ-AC_5:5 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! ! Output:Variable,PSZ-AC_6:6 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! ! Output:Variable,PSZ-AC_7:7 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! ! Output:Variable,PSZ-AC_8:8 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! ! Output:Variable,PSZ-AC_9:9 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! ! Output:Variable,PSZ-AC_10:10 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! ! ! Coil Load ! ! Output:Variable,*,Air System Cooling Coil Total Cooling Energy,Hourly; ! ! Output:Variable,*,Air System Heating Coil Total Heating Energy,Hourly; ! ! ! SHW ! ! Output:Variable,*,Water Heater Heating Rate,Hourly; ! ! ! Fan and Pump ! ! Output:Variable,*,Fan Electric Power,hourly; !- HVAC Average W ! Output:Variable,*,Pump Electric Power,hourly; !- HVAC Average W ! Output:Variable,*,Humidifier Electric Power,hourly; !- HVAC Average W ! ! ! Utility and Submeter ! ! Output:Meter,Electricity:Facility,Hourly; ! Output:Meter,Gas:Facility,Hourly; ! Output:Meter,InteriorLights:Electricity,Hourly; ! Output:Meter,ExteriorLights:Electricity,Hourly; ! Output:Meter,InteriorEquipment:Electricity,Hourly; ! Output:Meter,ExteriorEquipment:Electricity,Hourly; ! Output:Meter,Fans:Electricity,Hourly; ! Output:Meter,Pumps:Electricity,Hourly; ! Output:Meter,Heating:Electricity,Hourly; ! Output:Meter,Cooling:Electricity,Hourly; ! Output:Meter,HeatRejection:Electricity,Hourly; ! Output:Meter,Humidifier:Electricity,Hourly; ! Output:Meter,HeatRecovery:Electricity,Hourly; ! Output:Meter,DHW:Electricity,Hourly; ! Output:Meter,Cogeneration:Electricity,Hourly; ! Output:Meter,Refrigeration:Electricity,Hourly; ! Output:Meter,WaterSystems:Electricity,Hourly; ! ! Output:Meter,InteriorLights:Gas,Hourly; ! Output:Meter,ExteriorLights:Gas,Hourly; ! Output:Meter,InteriorEquipment:Gas,Hourly; ! Output:Meter,ExteriorEquipment:Gas,Hourly; ! Output:Meter,Fans:Gas,Hourly; ! Output:Meter,Pumps:Gas,Hourly; ! Output:Meter,Heating:Gas,Hourly; ! Output:Meter,Cooling:Gas,Hourly; ! Output:Meter,HeatRejection:Gas,Hourly; ! Output:Meter,Humidifier:Gas,Hourly; ! Output:Meter,HeatRecovery:Gas,Hourly; ! Output:Meter,DHW:Gas,Hourly; ! Output:Meter,Cogeneration:Gas,Hourly; ! Output:Meter,Refrigeration:Gas,Hourly; ! Output:Meter,WaterSystems:Gas,Hourly; ! EnergyManagementSystem:Sensor, OAT_F, !- Name , !- Output:Variable or Output:Meter Index Key Name Site Outdoor Air Drybulb Temperature; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, LGSTORE1_LSr, !- Name LGSTORE1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, LGSTORE1_Occ_Sensor, !- Name LGSTORE1, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, LGSTORE1_Area, !- Name LGSTORE1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, LGSTORE1_Light_Actuator, !- Name LGSTORE1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Actuator, LGSTORE1_Light_ALLOWANCE_Actuator, !- Name LGSTORE1_lights_ALLOWANCE, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_LGSTORE1_Light_EMS_Program, !- Name SET LGSTORE1_LSr_IP=0.093*LGSTORE1_LSr/LGSTORE1_Area, ! Calculate the actual LPD for each hour IF (LGSTORE1_Occ_Sensor <= 0) && (LGSTORE1_LSr_IP >= 0.02), SET LGSTORE1_Light_Actuator = 0.02*LGSTORE1_Area/0.09290304, SET LGSTORE1_Light_ALLOWANCE_Actuator = 0, ELSE, SET LGSTORE1_Light_Actuator = NULL, SET LGSTORE1_Light_ALLOWANCE_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_LGSTORE1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_LGSTORE1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, SMSTORE1_LSr, !- Name SMSTORE1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, SMSTORE1_Occ_Sensor, !- Name SMSTORE1, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, SMSTORE1_Area, !- Name SMSTORE1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, SMSTORE1_Light_Actuator, !- Name SMSTORE1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Actuator, SMSTORE1_Light_ALLOWANCE_Actuator, !- Name SMSTORE1_lights_ALLOWANCE, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_SMSTORE1_Light_EMS_Program, !- Name SET SMSTORE1_LSr_IP=0.093*SMSTORE1_LSr/SMSTORE1_Area, ! Calculate the actual LPD for each hour IF (SMSTORE1_Occ_Sensor <= 0) && (SMSTORE1_LSr_IP >= 0.02), SET SMSTORE1_Light_Actuator = 0.02*SMSTORE1_Area/0.09290304, SET SMSTORE1_Light_ALLOWANCE_Actuator = 0, ELSE, SET SMSTORE1_Light_Actuator = NULL, SET SMSTORE1_Light_ALLOWANCE_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_SMSTORE1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_SMSTORE1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, SMSTORE2_LSr, !- Name SMSTORE2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, SMSTORE2_Occ_Sensor, !- Name SMSTORE2, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, SMSTORE2_Area, !- Name SMSTORE2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, SMSTORE2_Light_Actuator, !- Name SMSTORE2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Actuator, SMSTORE2_Light_ALLOWANCE_Actuator, !- Name SMSTORE2_lights_ALLOWANCE, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_SMSTORE2_Light_EMS_Program, !- Name SET SMSTORE2_LSr_IP=0.093*SMSTORE2_LSr/SMSTORE2_Area, ! Calculate the actual LPD for each hour IF (SMSTORE2_Occ_Sensor <= 0) && (SMSTORE2_LSr_IP >= 0.02), SET SMSTORE2_Light_Actuator = 0.02*SMSTORE2_Area/0.09290304, SET SMSTORE2_Light_ALLOWANCE_Actuator = 0, ELSE, SET SMSTORE2_Light_Actuator = NULL, SET SMSTORE2_Light_ALLOWANCE_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_SMSTORE2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_SMSTORE2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, SMSTORE3_LSr, !- Name SMSTORE3, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, SMSTORE3_Occ_Sensor, !- Name SMSTORE3, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, SMSTORE3_Area, !- Name SMSTORE3, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, SMSTORE3_Light_Actuator, !- Name SMSTORE3_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Actuator, SMSTORE3_Light_ALLOWANCE_Actuator, !- Name SMSTORE3_lights_ALLOWANCE, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_SMSTORE3_Light_EMS_Program, !- Name SET SMSTORE3_LSr_IP=0.093*SMSTORE3_LSr/SMSTORE3_Area, ! Calculate the actual LPD for each hour IF (SMSTORE3_Occ_Sensor <= 0) && (SMSTORE3_LSr_IP >= 0.02), SET SMSTORE3_Light_Actuator = 0.02*SMSTORE3_Area/0.09290304, SET SMSTORE3_Light_ALLOWANCE_Actuator = 0, ELSE, SET SMSTORE3_Light_Actuator = NULL, SET SMSTORE3_Light_ALLOWANCE_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_SMSTORE3_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_SMSTORE3_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, SMSTORE4_LSr, !- Name SMSTORE4, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, SMSTORE4_Occ_Sensor, !- Name SMSTORE4, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, SMSTORE4_Area, !- Name SMSTORE4, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, SMSTORE4_Light_Actuator, !- Name SMSTORE4_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Actuator, SMSTORE4_Light_ALLOWANCE_Actuator, !- Name SMSTORE4_lights_ALLOWANCE, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_SMSTORE4_Light_EMS_Program, !- Name SET SMSTORE4_LSr_IP=0.093*SMSTORE4_LSr/SMSTORE4_Area, ! Calculate the actual LPD for each hour IF (SMSTORE4_Occ_Sensor <= 0) && (SMSTORE4_LSr_IP >= 0.02), SET SMSTORE4_Light_Actuator = 0.02*SMSTORE4_Area/0.09290304, SET SMSTORE4_Light_ALLOWANCE_Actuator = 0, ELSE, SET SMSTORE4_Light_Actuator = NULL, SET SMSTORE4_Light_ALLOWANCE_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_SMSTORE4_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_SMSTORE4_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, SMSTORE5_LSr, !- Name SMSTORE5, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, SMSTORE5_Occ_Sensor, !- Name SMSTORE5, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, SMSTORE5_Area, !- Name SMSTORE5, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, SMSTORE5_Light_Actuator, !- Name SMSTORE5_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Actuator, SMSTORE5_Light_ALLOWANCE_Actuator, !- Name SMSTORE5_lights_ALLOWANCE, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_SMSTORE5_Light_EMS_Program, !- Name SET SMSTORE5_LSr_IP=0.093*SMSTORE5_LSr/SMSTORE5_Area, ! Calculate the actual LPD for each hour IF (SMSTORE5_Occ_Sensor <= 0) && (SMSTORE5_LSr_IP >= 0.02), SET SMSTORE5_Light_Actuator = 0.02*SMSTORE5_Area/0.09290304, SET SMSTORE5_Light_ALLOWANCE_Actuator = 0, ELSE, SET SMSTORE5_Light_Actuator = NULL, SET SMSTORE5_Light_ALLOWANCE_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_SMSTORE5_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_SMSTORE5_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, SMSTORE6_LSr, !- Name SMSTORE6, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, SMSTORE6_Occ_Sensor, !- Name SMSTORE6, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, SMSTORE6_Area, !- Name SMSTORE6, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, SMSTORE6_Light_Actuator, !- Name SMSTORE6_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Actuator, SMSTORE6_Light_ALLOWANCE_Actuator, !- Name SMSTORE6_lights_ALLOWANCE, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_SMSTORE6_Light_EMS_Program, !- Name SET SMSTORE6_LSr_IP=0.093*SMSTORE6_LSr/SMSTORE6_Area, ! Calculate the actual LPD for each hour IF (SMSTORE6_Occ_Sensor <= 0) && (SMSTORE6_LSr_IP >= 0.02), SET SMSTORE6_Light_Actuator = 0.02*SMSTORE6_Area/0.09290304, SET SMSTORE6_Light_ALLOWANCE_Actuator = 0, ELSE, SET SMSTORE6_Light_Actuator = NULL, SET SMSTORE6_Light_ALLOWANCE_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_SMSTORE6_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_SMSTORE6_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, SMSTORE7_LSr, !- Name SMSTORE7, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, SMSTORE7_Occ_Sensor, !- Name SMSTORE7, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, SMSTORE7_Area, !- Name SMSTORE7, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, SMSTORE7_Light_Actuator, !- Name SMSTORE7_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Actuator, SMSTORE7_Light_ALLOWANCE_Actuator, !- Name SMSTORE7_lights_ALLOWANCE, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_SMSTORE7_Light_EMS_Program, !- Name SET SMSTORE7_LSr_IP=0.093*SMSTORE7_LSr/SMSTORE7_Area, ! Calculate the actual LPD for each hour IF (SMSTORE7_Occ_Sensor <= 0) && (SMSTORE7_LSr_IP >= 0.02), SET SMSTORE7_Light_Actuator = 0.02*SMSTORE7_Area/0.09290304, SET SMSTORE7_Light_ALLOWANCE_Actuator = 0, ELSE, SET SMSTORE7_Light_Actuator = NULL, SET SMSTORE7_Light_ALLOWANCE_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_SMSTORE7_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_SMSTORE7_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, SMSTORE8_LSr, !- Name SMSTORE8, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, SMSTORE8_Occ_Sensor, !- Name SMSTORE8, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, SMSTORE8_Area, !- Name SMSTORE8, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, SMSTORE8_Light_Actuator, !- Name SMSTORE8_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Actuator, SMSTORE8_Light_ALLOWANCE_Actuator, !- Name SMSTORE8_lights_ALLOWANCE, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_SMSTORE8_Light_EMS_Program, !- Name SET SMSTORE8_LSr_IP=0.093*SMSTORE8_LSr/SMSTORE8_Area, ! Calculate the actual LPD for each hour IF (SMSTORE8_Occ_Sensor <= 0) && (SMSTORE8_LSr_IP >= 0.02), SET SMSTORE8_Light_Actuator = 0.02*SMSTORE8_Area/0.09290304, SET SMSTORE8_Light_ALLOWANCE_Actuator = 0, ELSE, SET SMSTORE8_Light_Actuator = NULL, SET SMSTORE8_Light_ALLOWANCE_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_SMSTORE8_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_SMSTORE8_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, LGSTORE2_LSr, !- Name LGSTORE2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, LGSTORE2_Occ_Sensor, !- Name LGSTORE2, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, LGSTORE2_Area, !- Name LGSTORE2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, LGSTORE2_Light_Actuator, !- Name LGSTORE2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Actuator, LGSTORE2_Light_ALLOWANCE_Actuator, !- Name LGSTORE2_lights_ALLOWANCE, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_LGSTORE2_Light_EMS_Program, !- Name SET LGSTORE2_LSr_IP=0.093*LGSTORE2_LSr/LGSTORE2_Area, ! Calculate the actual LPD for each hour IF (LGSTORE2_Occ_Sensor <= 0) && (LGSTORE2_LSr_IP >= 0.02), SET LGSTORE2_Light_Actuator = 0.02*LGSTORE2_Area/0.09290304, SET LGSTORE2_Light_ALLOWANCE_Actuator = 0, ELSE, SET LGSTORE2_Light_Actuator = NULL, SET LGSTORE2_Light_ALLOWANCE_Actuator = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_LGSTORE2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_LGSTORE2_Light_EMS_Program; !- Program Name 1