!The DOE Prototype Building Models were developed by Pacific Northwest National Laboratory (PNNL), under contract with the U.S. !Department of Energy (DOE). These building models were derived from DOE's Commercial Reference Building Models with modifications !based on input from the ASHRAE Standard 90.1 committee, the Advanced Energy Design Guide series, and building industry experts. The !prototypes models were developed to quantify energy saving impacts from newly published editions of ASHRAE Standard 90.1, 189.1, IECC, !and other energy codes and standards. The basic building descriptions can be found in the Scorecards posted at www.energycodes.gov !website. The recommended citation of the prototype models is ! !DOE and PNNL. 2020. Commercial Prototype Building Models, Richland, WA, Pacific Northwest National Laboratory. Available at https://www.energycodes.gov/development/commercial/prototype_models. ! !Detailed descriptions of the prototype model development and addenda modeling strategies can be found in the following reports: !DOE, 2020. Preliminary Energy Savings Analysis: ANSI/ASHRAE/IES Standard 90.1-2019. Report prepared by Zhang, J., M. Rosenberg, J. !Lerond, Y. Xie, Nambia, C., Y. Chen, R. Hart, M. Halverson, D. Maddox, and S. Goel, Richland, WA, Pacific Northwest National Laboratory. ! !Zhang, J., Y. Chen, Y. Xie, M. Rosenberg, R. Hart. Energy and Energy Cost Savings Analysis of the 2018 IECC for Commercial Buildings. !2018. PNNL-28125. Richland, WA: Pacific Northwest National Laboratory. ! !DOE. 2017. Energy Savings Analysis: ANSI/ASHRAE/IES Standard 90.1-2016. Prepared by Athalye, R.A, M.A. Halverson, M.I. Rosenberg, B. Liu, !J. Zhang, R. Hart, V.V. Mendon, S. Goel, Y. Chen, Y. Xie, and M. Zhao, Richland, WA, Pacific Northwest National Laboratory. https://www.energycodes.gov/sites/default/files/documents/02202018_Standard_90.1-2016_Determination_TSD.pdf. ! !Zhang, J., Y. Xie, R.A. Athalye, J. Zhuge, M. Rosenberg, R. Hart, and B. Liu. Energy and Energy Cost Savings Analysis of the 2015 IECC !for Commercial Buildings. 2015. PNNL-24269 Rev. 1. Richland, WA: Pacific Northwest National !Laboratory. https://www.energycodes.gov/sites/default/files/documents/2015_IECC_Commercial_Analysis.pdf. ! !Halverson M.A., M.I. Rosenberg, W. Wang, J. Zhang, V.V. Mendon, R.A. Athalye, Y. Xie, R. Hart, S. Goel, 2014. ANSI/ASHRAE/IES Standard !90.1-2013 Determination of Energy Savings: Quantitative Analysis, PNNL-23479. Richland, WA: Pacific Northwest National Laboratory. https://www.energycodes.gov/sites/default/files/documents/901-2013_finalCommercialDeterminationQuantitativeAnalysis_TSD_0.pdf. ! !Goel S., R.A. Athalye, W. Wang, J. Zhang, M.I. Rosenberg, Y. Xie, and R. Hart, et al. 2014. Enhancements to ASHRAE Standard 90.1 !Prototype Building Models. PNNL-23269. Richland, WA: Pacific Northwest National Laboratory. https://www.pnnl.gov/main/publications/external/technical_reports/PNNL-23269.pdf. ! !Zhang J., R.A. Athalye, R. Hart, M.I. Rosenberg, Y. Xie, S. Goel, and V.V. Mendon, et al. 2013. Energy and Energy Cost Savings Analysis !of the IECC for Commercial Buildings. PNNL-22760. Richland, WA: Pacific Northwest National Laboratory. http://www.pnnl.gov/main/publications/external/technical_reports/PNNL-22760.pdf. ! !Thornton B.A., M.I. Rosenberg, E.E. Richman, W. Wang, Y. Xie, J. Zhang, H. Cho, VV Mendon, R.A. Athalye, and B. Liu. 2011. Achieving !the 30% Goal: Energy and Cost Savings Analysis of ASHRAE Standard 90.1-2010. PNNL-20405. Richland, WA: Pacific Northwest National !Laboratory. https://www.energycodes.gov/sites/default/files/documents/BECP_Energy_Cost_Savings_STD2010_May2011_v00.pdf. ! ! ! WeatherFile: USA_MN_Rochester.Intl.AP.726440_TMY3.epw ! BEGIN ECONOMIZER MAP ! Economizer Name, DX COIL Name ! PSZ-AC_1:5_OA_Controller, PSZ-AC_1:5_CoolC DXCoil ! PSZ-AC_2:6_OA_Controller, PSZ-AC_2:6_CoolC DXCoil ! PSZ-AC_3:7_OA_Controller, PSZ-AC_3:7_CoolC DXCoil ! PSZ-AC_4:8_OA_Controller, PSZ-AC_4:8_CoolC DXCoil ! PSZ-AC_5:9_OA_Controller, PSZ-AC_5:9_CoolC DXCoil ! END ECONOMIZER MAP ! ! ! BEGIN EMS PROGRAM MAP ! EMS PROGRAM, DX COIL Name ! PSZ-AC_1:5, PSZ-AC_1:5_COOLC DXCOIL ! PSZ-AC_2:6, PSZ-AC_2:6_COOLC DXCOIL ! PSZ-AC_3:7, PSZ-AC_3:7_COOLC DXCOIL ! PSZ-AC_4:8, PSZ-AC_4:8_COOLC DXCOIL ! PSZ-AC_5:9, PSZ-AC_5:9_COOLC DXCOIL ! END EMS PROGRAM MAP ! GPARM parameters as input: ! Case = ASHRAE901_SchoolSecondary_STD2019_Rochester ! SelectedCase = ! ground_tempt = National_SchoolSecondary_ASHRAE901_STD2016_Zone6A_nonres_MN-Rochester-MN.gtp ! avg_oa_tempt_ip = 43.475 ! maxdiff_oa_tempt_ip = 60.3 ! ext_wall_type = SteelFramedWall ! nonres_ext_wall_ufactor = 0.278234887 ! roof_type = LightweightRoof ! nonres_roof_ufactor = 0.181704416 ! nonres_window = ! nonres_skylight = ! daylighting_control = yes ! sidelighting_control = yes_AY ! audi_sidelighting_control = yes ! roof_emissivity = 0.9 ! roof_solar_absorp = 0.77 ! LPD_classroom = 7.642376396 ! LPD_corridor = 4.413203271 ! LPD_lobby = 9.04168475 ! LPD_mechanical = 10.2257149 ! LPD_bath = 6.781263563 ! LPD_office = 7.965293709 ! LPD_gym = 9.687519375 ! LPD_kitchen = 11.73266235 ! LPD_cafeteria = 4.305564167 ! LPD_library = 8.934045646 ! LPD_auditorium = 6.565985354 ! exterior_lights_watts = 0 ! exterior_lights_watts_a = 441.8 ! exterior_lights_watts_b = 2994.5 ! wcc_economizer = DifferentialDryBulb ! skip_economizer_control = No ! cc_sa_humidity = 0.0085 ! DX_damper_sch = MinOA_MotorizedDamper_Sched ! wcc_damper_sch = MinOA_MotorizedDamper_Sched ! OA_classroom = 0.00238745 ! OA_corridor = 0.000304781 ! OA_lobby = 0.000304781 ! OA_computer_room = 0.00238745 ! OA_mechanical = 0 ! OA_bath = 0 ! OA_office = 0.000431773 ! OA_gym = 0.001523905 ! OA_aux_gym = 0.001523905 ! OA_kitchen = 0.001178183 ! OA_cafeteria = 0.004724104 ! OA_auditorium = 0.004114542 ! OA_library = 0.000863546 ! auditorium_OA_per_area = 0.000304781 ! auditorium_OA_per_person = 0.002359604 ! classroom_OA_per_area = 0.000609562 ! classroom_OA_per_person = 0.004719207 ! cafeteria_OA_per_area = 0.000914343 ! cafeteria_OA_per_person = 0.003539405 ! PSZ_AC_5_9_DCV = No ! PSZ_AC_3_7_DCV = No ! PSZ_AC_1_5_DCV = No ! PSZ_AC_2_6_DCV = No ! VAV_POD_1_DCV = No ! VAV_POD_2_DCV = No ! VAV_POD_3_DCV = No ! chilledwater_pump_head = 44761.27683 ! chilledwater_pump_secondary_head = 134283.8305 ! Gym_SZ_VAV = No ! Aux_Gym_SZ_VAV = No ! Auditorium_SZ_VAV = No ! Kitchen_SZ_VAV = No ! Cafeteria_SZ_VAV = No ! avg_oa_tempt = 6.375 ! maxdiff_oa_tempt = 33.5 ! infil = 0.00056896 ! SAT_reset_switch = Yes ! SAT_reset_switch_VAV_OTHER = Yes ! SAT_reset_T = 15.6 ! door_infil = 5.114489639 ! frac_ofpk = 0.144 ! VAV_Pod_1_ERV = Yes ! VAV_Pod_2_ERV = Yes ! VAV_Pod_3_ERV = Yes ! PSZ_AC_1_5_ERV = Yes ! PSZ_AC_2_6_ERV = Yes ! PSZ_AC_3_7_ERV = Yes ! PSZ_AC_5_9_ERV = Yes ! economizer_lockout = LockoutWithHeating ! eco_max_temp_limit = na ! Transfer_Air = all_exhaust ! BLDG_ELEVATORS_LIGHTS_FAN_SCH = ELEV_LIGHT_FAN_SCH_ADD_DF ! BLDG_ELEVATORS_LIGHTS_FAN_POWER = 125 ! frame_width = 0 ! frame_cond = 0 ! frame = Skylight_Frame ! BLDG_EQUIP_SCH = BLDG_EQUIP_SCH_ADV ! addendum_cd = 2016AS ! VAVReheat_flag = yes ! PumpCurve_flag = pump_ride_on_curve ! pv_generator = no ! pv_surface_area = 0 ! STD189_overhang = no ! swh_et = 0.802764687 ! swh_ua = 15.60100579 ! ext_lgt_sch = Exterior_Lgt_ALWAYS_ON ! VAV_OTHER_ERV = Yes ! mdp_VAVother = 0.4 ! add_ck_vav_other = Yes ! add_ck_vav_pod_1 = Yes ! add_ck_vav_pod_2 = Yes ! add_ck_vav_pod_3 = Yes ! Bathrooms_ZN_1_FLR_1_mdp = 0.2 ! Bathrooms_ZN_1_FLR_2_mdp = 0.2 ! Library_Media_Center_ZN_1_FLR_2_mdp = 0.2 ! Lobby_ZN_1_FLR_1_mdp = 0.2 ! Lobby_ZN_1_FLR_2_mdp = 0.2 ! Main_Corridor_ZN_1_FLR_1_mdp = 0.2 ! Main_Corridor_ZN_1_FLR_2_mdp = 0.2 ! Mech_ZN_1_FLR_1_mdp = 0.2 ! Mech_ZN_1_FLR_2_mdp = 0.2 ! Offices_ZN_1_FLR_1_mdp = 0.2 ! Offices_ZN_1_FLR_2_mdp = 0.2 ! Corner_Class_1_Pod_1_ZN_1_FLR_1_mdp = 0.7 ! Corner_Class_1_Pod_1_ZN_1_FLR_2_mdp = 0.7 ! Corner_Class_2_Pod_1_ZN_1_FLR_1_mdp = 0.7 ! Corner_Class_2_Pod_1_ZN_1_FLR_2_mdp = 0.7 ! Corridor_Pod_1_ZN_1_FLR_1_mdp = 0.2 ! Corridor_Pod_1_ZN_1_FLR_2_mdp = 0.2 ! Mult_Class_1_Pod_1_ZN_1_FLR_1_mdp = 0.7 ! Mult_Class_1_Pod_1_ZN_1_FLR_2_mdp = 0.7 ! Mult_Class_2_Pod_1_ZN_1_FLR_1_mdp = 0.7 ! Mult_Class_2_Pod_1_ZN_1_FLR_2_mdp = 0.7 ! Corner_Class_1_Pod_2_ZN_1_FLR_1_mdp = 0.7 ! Corner_Class_1_Pod_2_ZN_1_FLR_2_mdp = 0.7 ! Corner_Class_2_Pod_2_ZN_1_FLR_1_mdp = 0.7 ! Corner_Class_2_Pod_2_ZN_1_FLR_2_mdp = 0.7 ! Corridor_Pod_2_ZN_1_FLR_1_mdp = 0.2 ! Corridor_Pod_2_ZN_1_FLR_2_mdp = 0.2 ! Mult_Class_1_Pod_2_ZN_1_FLR_1_mdp = 0.7 ! Mult_Class_1_Pod_2_ZN_1_FLR_2_mdp = 0.7 ! Mult_Class_2_Pod_2_ZN_1_FLR_1_mdp = 0.7 ! Mult_Class_2_Pod_2_ZN_1_FLR_2_mdp = 0.7 ! Corner_Class_1_Pod_3_ZN_1_FLR_1_mdp = 0.7 ! Corner_Class_1_Pod_3_ZN_1_FLR_2_mdp = 0.7 ! Corner_Class_2_Pod_3_ZN_1_FLR_1_mdp = 0.7 ! Corner_Class_2_Pod_3_ZN_1_FLR_2_mdp = 0.7 ! Corridor_Pod_3_ZN_1_FLR_1_mdp = 0.2 ! Corridor_Pod_3_ZN_1_FLR_2_mdp = 0.2 ! Mult_Class_1_Pod_3_ZN_1_FLR_1_mdp = 0.7 ! Mult_Class_1_Pod_3_ZN_1_FLR_2_mdp = 0.7 ! Mult_Class_2_Pod_3_ZN_1_FLR_1_mdp = 0.7 ! Mult_Class_2_Pod_3_ZN_1_FLR_2_mdp = 0.7 ! vav_other_oaf = autosize ! vav_pod_1_oaf = autosize ! vav_pod_2_oaf = autosize ! vav_pod_3_oaf = autosize ! heating_damper_act = ReverseWithLimits ! LTG_SCH_SET = LTG_SET_STD2013 ! transformer_size = 225000 ! transformer_eff = 0.989 ! VAV_Pod_1_ERV_power = 5498.91025 ! VAV_Pod_2_ERV_power = 5498.91025 ! VAV_Pod_3_ERV_power = 5498.91025 ! PSZ_AC_1_5_ERV_power = 2210.5647 ! PSZ_AC_2_6_ERV_power = 1414.563025 ! PSZ_AC_3_7_ERV_power = 2966.759475 ! PSZ_AC_5_9_ERV_power = 2165.0752 ! VAV_OTHER_ERV_power = 1970.67575 ! freezer_power = 555 ! refrigerator_power = 313.3 ! HtgSetP_Sch = HTGSETP_SCH_YES_OPTIMUM ! ClgSetP_Sch = CLGSETP_SCH_YES_OPTIMUM ! OA_BASED_OPTIMUM_START_EMS = yes ! OPTIMUM_START_SF_DEPENDENT_EMS = no ! wwr = 0.35 ! swh_et_booster = 1 ! swh_ua_booster = 1.591045154 ! pipe_heat_loss = 1205.08 ! evap_fan_power_case1 = 19.51428571 ! evap_fan_power_case2 = 15.71428571 ! walkin_lighting_sch = walkin_occ_lght_sch ! fan_total_eff = 0.385 ! kitchen_exh_fan_power = 914 ! skip_EMSprogram = no ! BoilerAM = Yes ! HtgSetP_Sch_PSZ_AC_5_9 = HTGSETP_SCH_YES_OPTIMUM ! ClgSetP_Sch_PSZ_AC_5_9 = CLGSETP_SCH_YES_OPTIMUM ! HtgSetP_Sch_PSZ_AC_4_8 = HTGSETP_SCH_YES_OPTIMUM ! ClgSetP_Sch_PSZ_AC_4_8 = CLGSETP_SCH_YES_OPTIMUM ! HtgSetP_Sch_PSZ_AC_3_7 = HTGSETP_SCH_YES_OPTIMUM ! ClgSetP_Sch_PSZ_AC_3_7 = CLGSETP_SCH_YES_OPTIMUM ! HtgSetP_Sch_PSZ_AC_2_6 = HTGSETP_SCH_YES_OPTIMUM ! ClgSetP_Sch_PSZ_AC_2_6 = CLGSETP_SCH_YES_OPTIMUM ! HtgSetP_Sch_PSZ_AC_1_5 = HTGSETP_SCH_YES_OPTIMUM ! ClgSetP_Sch_PSZ_AC_1_5 = CLGSETP_SCH_YES_OPTIMUM ! Wfile_TMY3 = USA_MN_Rochester.Intl.AP.726440_TMY3.epw ! loadProfile = No ! receptacle_ctrl_occ_reduction_frac = 0.951231605 ! receptacle_ctrl_unocc_reduction_frac = 0.844639049 ! HOTW_ST_Reset = No ! CHW_ST_Reset = No ! SHW_Pump_Head = 34026 ! CodeName = ASHRAE90.1_STD2019 ! CZ_City_Old = Burlington ! CZ_Label = 6A ! exterior_lights_watts_c = 2973.7 ! Addendum_AH = Yes ! LPD_Ctrl = 0.02 ! con_swingdoor_r = 0.475963827 ! CHW_deltaT = 8.33 ! HOTW_PumpCurve_flag = pump_ride_on_curve ! office_standby_mode = Yes ! nonres_window_u_factor = 0.35 ! nonres_window_shgc = 0.38 ! nonresLSG = 1.1 ! nonres_skylight_u_factor = 0.47 ! nonres_skylight_shgc = 0.4 ! nonresskyltLSG = 1 ! AnalysisPurpose = ProgressIndicator ! AnalysisCodeName = ASHRAE901 ! AnalysisCodeYear = 2019 ! AnalysisAmendment = NoneAmend ! AnalysisPrototype = SchoolSecondary ! AnalysisScope = National ! AnalysisState = National ! AnalysisClimateZone = 6A ! AnalysisCity = USA_MN_Rochester ! var_Ffactor_IP = 0.51 ! var_Cfactor_IP = 0.092 ! Bathrooms_ZN_SWH_flow = 7.39764e-05 ! cop_walkin_freezer = 2.34 ! cop_walkin_cooler = 7.12 ! economizer_lockout_vav = LockoutWithHeating ! specify overhang_pf for 1891 codes !- =========== ALL OBJECTS IN CLASS: VERSION =========== Version,9.0; !- =========== ALL OBJECTS IN CLASS: SIMULATIONCONTROL =========== SimulationControl, Yes, !- Do Zone Sizing Calculation Yes, !- Do System Sizing Calculation Yes, !- Do Plant Sizing Calculation No, !- Run Simulation for Sizing Periods YES; !- Run Simulation for Weather File Run Periods !- =========== ALL OBJECTS IN CLASS: BUILDING =========== Building, SchoolSecondary, !- Name 0.0000, !- North Axis {deg} City, !- Terrain 0.0400, !- Loads Convergence Tolerance Value 0.2000, !- Temperature Convergence Tolerance Value {deltaC} FullInteriorAndExterior, !- Solar Distribution 25, !- Maximum Number of Warmup Days 6; !- Minimum Number of Warmup Days !- =========== ALL OBJECTS IN CLASS: SHADOWCALCULATION =========== ShadowCalculation, AverageOverDaysInFrequency, !- Calculation Method 30, !- Calculation Frequency 15000; !- Maximum Figures in Shadow Overlap Calculations !- =========== ALL OBJECTS IN CLASS: SURFACECONVECTIONALGORITHM:INSIDE =========== SurfaceConvectionAlgorithm:Inside,TARP; !- =========== ALL OBJECTS IN CLASS: SURFACECONVECTIONALGORITHM:OUTSIDE =========== SurfaceConvectionAlgorithm:Outside,TARP; !- =========== ALL OBJECTS IN CLASS: HEATBALANCEALGORITHM =========== HeatBalanceAlgorithm,ConductionTransferFunction,200.0000; !- =========== ALL OBJECTS IN CLASS: TIMESTEP =========== Timestep,6; !- =========== ALL OBJECTS IN CLASS: CONVERGENCELIMITS =========== ConvergenceLimits, 1, !- Minimum System Timestep {minutes} 20; !- Maximum HVAC Iterations !- =========== ALL OBJECTS IN CLASS: SITE:LOCATION =========== ! Site:Location and design-day objects created by: ! ../../_p.bin/ddy2idf /projects/bigsim/weather/EnergyPlus/tmy3.new/all/USA_MN_Rochester.Intl.AP.726440_TMY3.ddy ! Site:Location, Rochester International Arpt_MN_USA Design_Conditions, !- Site:Location Name 43.90, !- Latitude {N+ S-} -92.50, !- Longitude {W- E+} -6.00, !- Time Zone Relative to GMT {GMT+/-} 398.00; !- Elevation {m} SizingPeriod:DesignDay, Rochester International Arpt Ann Htg 99.6% Condns DB, !- Name 1, !- Month 21, !- Day of Month WinterDesignDay,!- Day Type -26.2, !- Maximum Dry-Bulb Temperature {C} 0.0, !- Daily Dry-Bulb Temperature Range {C} DefaultMultipliers, !- Dry-Bulb Temperature Range Modifier Type , !- Dry-Bulb Temperature Range Modifier Schedule Name Wetbulb, !- Humidity Condition Type -26.2, !- Wetbulb at Maximum Dry-Bulb {C} , !- Humidity Indicating Day Schedule Name , !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir} , !- Enthalpy at Maximum Dry-Bulb {J/kg} , !- Daily WetBulb Temperature Range {deltaC} 96634., !- Barometric Pressure {Pa} 5.7, !- Wind Speed {m/s} design conditions vs. traditional 6.71 m/s (15 mph) 310, !- Wind Direction {Degrees; N=0, S=180} No, !- Rain {Yes/No} No, !- Snow on ground {Yes/No} No, !- Daylight Savings Time Indicator ASHRAEClearSky, !- Solar Model Indicator , !- Beam Solar Day Schedule Name , !- Diffuse Solar Day Schedule Name , !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) , !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) 0.00; !- Clearness {0.0 to 1.1} SizingPeriod:DesignDay, Rochester International Arpt Ann Clg .4% Condns DB=>MWB, !- Name 7, !- Month 21, !- Day of Month SummerDesignDay,!- Day Type 31.2, !- Maximum Dry-Bulb Temperature {C} 10.6, !- Daily Dry-Bulb Temperature Range {C} DefaultMultipliers, !- Dry-Bulb Temperature Range Modifier Type , !- Dry-Bulb Temperature Range Modifier Schedule Name Wetbulb, !- Humidity Condition Type 23.1, !- Wetbulb at Maximum Dry-Bulb {C} , !- Humidity Indicating Day Schedule Name , !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir} , !- Enthalpy at Maximum Dry-Bulb {J/kg} , !- Daily WetBulb Temperature Range {deltaC} 96634., !- Barometric Pressure {Pa} 6.7, !- Wind Speed {m/s} design conditions vs. traditional 3.35 m/s (7mph) 200, !- Wind Direction {Degrees; N=0, S=180} No, !- Rain {Yes/No} No, !- Snow on ground {Yes/No} No, !- Daylight Savings Time Indicator ASHRAETau, !- Solar Model Indicator , !- Beam Solar Day Schedule Name , !- Diffuse Solar Day Schedule Name 0.404, !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) 2.226; !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) !- =========== ALL OBJECTS IN CLASS: RUNPERIOD =========== RunPeriod, , !- Name 1, !- Begin Month 1, !- Begin Day of Month , !- Begin Year 12, !- End Month 31, !- End Day of Month , !- End Year Sunday, !- Day of Week for Start Day No, !- Use Weather File Holidays and Special Days No, !- Use Weather File Daylight Saving Period No, !- Apply Weekend Holiday Rule Yes, !- Use Weather File Rain Indicators Yes; !- Use Weather File Snow Indicators !- =========== ALL OBJECTS IN CLASS: RUNPERIODCONTROL:SPECIALDAYS =========== RunPeriodControl:SpecialDays, New Years Day, !- Name January 1, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Veterans Day, !- Name November 11, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Christmas, !- Name December 25, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Independence Day, !- Name July 4, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, MLK Day, !- Name 3rd Monday in January, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Presidents Day, !- Name 3rd Monday in February, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Memorial Day, !- Name Last Monday in May, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Labor Day, !- Name 1st Monday in September, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Columbus Day, !- Name 2nd Monday in October, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Thanksgiving, !- Name 4th Thursday in November,!- Start Date 1, !- Duration {days} Holiday; !- Special Day Type !- =========== ALL OBJECTS IN CLASS: RUNPERIODCONTROL:DAYLIGHTSAVINGTIME =========== RunPeriodControl:DaylightSavingTime, 2nd Sunday in March, !- Start Date 1st Sunday in November; !- End Date !- =========== ALL OBJECTS IN CLASS: SITE:WATERMAINSTEMPERATURE =========== Site:WaterMainsTemperature, CORRELATION, !- Calculation Method , !- Temperature Schedule Name 6.375, !- Annual average outdoor air temperature {C} 33.5; !- Maximum difference in monthly average outdoor air temperatures {C} !- =========== ALL OBJECTS IN CLASS: Site:GroundTemperature:FCfactorMethod =========== Site:GroundTemperature:FCfactorMethod, 7.4, !- January Ground Temperature {C} -0.0, !- February Ground Temperature {C} -7.6, !- March Ground Temperature {C} -12.6, !- April Ground Temperature {C} -7.7, !- May Ground Temperature {C} 0.3, !- June Ground Temperature {C} 7.0, !- July Ground Temperature {C} 14.2, !- August Ground Temperature {C} 19.2, !- September Ground Temperature {C} 20.9, !- October Ground Temperature {C} 20.0, !- November Ground Temperature {C} 15.4; !- December Ground Temperature {C} !- =========== ALL OBJECTS IN CLASS: MATERIAL:REGULAR-R =========== Material:NoMass, Opaque Door panel_con, !- Name MediumRough, !- Roughness 0.475963827, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance !- =========== ALL OBJECTS IN CLASS: CONSTRUCTION =========== Construction, Swinging Door_con, !- Name Opaque Door panel_con; !- Outside Layer ! !- =========== ALL OBJECTS IN CLASS: MATERIAL:REGULAR =========== Material, Std Wood 6inch, !- Name MediumSmooth, !- Roughness 0.15, !- Thickness {m} 0.12, !- Conductivity {W/m-K} 540.0000, !- Density {kg/m3} 1210, !- Specific Heat {J/kg-K} 0.9000000, !- Thermal Absorptance 0.7000000, !- Solar Absorptance 0.7000000; !- Visible Absorptance Material, AC02 Acoustic Ceiling, !- Name MediumSmooth, !- Roughness 1.2700000E-02, !- Thickness {m} 5.7000000E-02, !- Conductivity {W/m-K} 288.0000, !- Density {kg/m3} 1339.000, !- Specific Heat {J/kg-K} 0.9000000, !- Thermal Absorptance 0.7000000, !- Solar Absorptance 0.2000000; !- Visible Absorptance Material, F07 25mm stucco, !- Name Smooth, !- Roughness 0.0254, !- Thickness {m} 0.72, !- Conductivity {W/m-K} 1856, !- Density {kg/m3} 840, !- Specific Heat {J/kg-K} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material, F08 Metal surface, !- Name Smooth, !- Roughness 0.0008, !- Thickness {m} 45.28, !- Conductivity {W/m-K} 7824, !- Density {kg/m3} 500; !- Specific Heat {J/kg-K} Material, F08 Metal roof surface, !- Name Smooth, !- Roughness 0.0008, !- Thickness {m} 45.28, !- Conductivity {W/m-K} 7824, !- Density {kg/m3} 500, !- Specific Heat {J/kg-K} 0.9, !- Absorptance:Thermal 0.77; !- Absorptance:Solar Material, F12 Asphalt shingles, !- Name VeryRough, !- Roughness 0.0032, !- Thickness {m} 0.04, !- Conductivity {W/m-K} 1120, !- Density {kg/m3} 1260, !- Specific Heat {J/kg-K} 0.9, !- Absorptance:Thermal 0.77; !- Absorptance:Solar Material, F13 Built-up roofing, !- Name Rough, !- Roughness 0.0095, !- Thickness {m} 0.16, !- Conductivity {W/m-K} 1120, !- Density {kg/m3} 1460, !- Specific Heat {J/kg-K} 0.9, !- Absorptance:Thermal 0.77; !- Absorptance:Solar Material, G01 13mm gypsum board, !- Name Smooth, !- Roughness 0.0127, !- Thickness {m} 0.1600, !- Conductivity {W/m-K} 800.0000, !- Density {kg/m3} 1090.0000, !- Specific Heat {J/kg-K} 0.9000, !- Absorptance:Thermal 0.7000, !- Absorptance:Solar 0.5000; !- Absorptance:Visible Material, G01 16mm gypsum board, !- Name MediumSmooth, !- Roughness 0.0159, !- Thickness {m} 0.16, !- Conductivity {W/m-K} 800, !- Density {kg/m3} 1090; !- Specific Heat {J/kg-K} Material, G02 16mm plywood, !- Name Smooth, !- Roughness 0.0159, !- Thickness {m} 0.12, !- Conductivity {W/m-K} 544, !- Density {kg/m3} 1210; !- Specific Heat {J/kg-K} Material, M14 150mm heavyweight concrete roof, !- Name MediumRough, !- Roughness 0.1524, !- Thickness {m} 2.31, !- Conductivity {W/m-K} 2322, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, 100mm Normalweight concrete wall, !- Name - based on 90.1-2004 Appendix-Table A3-1B MediumRough, !- Roughness 0.1016, !- Thickness {m} 2.31, !- Conductivity {W/m-K} 2322, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, 200mm Normalweight concrete wall, !- Name - based on 90.1-2004 Appendix-Table A3-1B MediumRough, !- Roughness 0.2032, !- Thickness {m} 2.31, !- Conductivity {W/m-K} 2322, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, 100mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B MediumRough, !- Roughness 0.1016, !- Thickness {m} 2.31, !- Conductivity {W/m-K} 2322, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, 150mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B MediumRough, !- Roughness 0.1524, !- Thickness {m} 2.31, !- Conductivity {W/m-K} 2322, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, 200mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B MediumRough, !- Roughness 0.2032, !- Thickness {m} 2.31, !- Conductivity {W/m-K} 2322, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, M10 200mm concrete block wall, !- Name MediumRough, !- Roughness 0.2032, !- Thickness {m} 0.72, !- Conductivity {W/m-K} 800, !- Density {kg/m3} 832; !- Specific Heat {J/kg-K} Material, M10 200mm concrete block basement wall, !- Name MediumRough, !- Roughness 0.2032, !- Thickness {m} 1.326, !- Conductivity {W/m-K} 1842, !- Density {kg/m3} 912; !- Specific Heat {J/kg-K} Material:NoMass, CP02 CARPET PAD, !- Name VeryRough, !- Roughness 0.21648, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.8; !- Visible Absorptance Material:NoMass, Air_Wall_Material, !- Name Rough, !- Roughness 0.2079491, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7; !- Solar Absorptance Material:NoMass, Nonres_Roof_Insulation, !- Name MediumSmooth, !- Roughness 5.30668495131472, !- Thermal Resistance {m2-K/W} 0.9, !- Absorptance:Thermal 0.7, !- Absorptance:Solar 0.7; !- Absorptance:Visible Material:NoMass, Res_Roof_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Semiheated_Roof_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Nonres_Exterior_Wall_Insulation, !- Name MediumSmooth, !- Roughness 3.21036415428069, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Res_Exterior_Wall_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Semiheated_Exterior_Wall_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Nonres_Floor_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Res_Floor_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Semiheated_Floor_Insulation, !- Name MediumSmooth, !- Roughness 0.0299387330245182, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance Material:NoMass, Std Opaque Door Panel, !- Name MediumRough, !- Roughness 0.123456790123457, !- (corresponds to default RSI-0.12327 or R-0.7) Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7, !- Solar Absorptance 0.7; !- Visible Absorptance !- =========== ALL OBJECTS IN CLASS: CONSTRUCTION =========== Construction, InteriorFurnishings, !- Name Std Wood 6inch; !- Outside Layer Construction, Air_Wall, !- Name Air_Wall_Material; !- Outside Layer Construction, DropCeiling, !- Name AC02 Acoustic Ceiling; !- Outside Layer Construction, OpaqueDoor, !- Name Std Opaque Door Panel; !- Outside Layer Construction, AtticRoofDeck, !- Name F12 Asphalt shingles, !- Outside Layer G02 16mm plywood; !- Layer 2 Construction, int_wall, !- Name G01 13mm gypsum board, !- Outside Layer G01 13mm gypsum board; !- Layer 2 Construction, ext_slab_8in_with_carpet,!- Name 200mm Normalweight concrete floor, !- Outside Layer CP02 CARPET PAD; !- Layer 2 Construction, ext_slab_8in, !- Name 200mm Normalweight concrete floor; !- Outside Layer Construction, ext_slab_6in_with_carpet,!- Name 150mm Normalweight concrete floor, !- Outside Layer CP02 CARPET PAD; !- Layer 2 Construction, ext_slab_6in, !- Name 150mm Normalweight concrete floor; !- Outside Layer Construction, int_slab_floor, !- Name 100mm Normalweight concrete floor, !- Outside Layer CP02 CARPET PAD; !- Layer 2 Construction, int_slab_ceiling, !- Name CP02 CARPET PAD, !- Outside Layer 100mm Normalweight concrete floor; !- Layer 2 Construction, basement_wall, !- Name M10 200mm concrete block basement wall; !- Outside Layer Construction, int_wood_floor, !- Name AC02 Acoustic Ceiling, !- Outside Layer G02 16mm plywood, !- Layer 2 CP02 CARPET PAD; !- Layer 3 Construction, ext_soffit_floor, !- Name G02 16mm plywood; !- Outside Layer Construction, nonres_roof, !- Name F13 Built-up roofing, !- Outside Layer Nonres_Roof_Insulation, !- Layer #2 F08 Metal surface; !- Layer #3 Construction, res_roof, !- Name F13 Built-up roofing, !- Outside Layer Res_Roof_Insulation, !- Layer #2 F08 Metal surface; !- Layer #3 Construction, semiheated_roof, !- Name F13 Built-up roofing, !- Outside Layer Semiheated_Roof_Insulation, !- Layer #2 F08 Metal surface; !- Layer #3 Construction, nonres_ext_wall, !- Name F07 25mm stucco, !- Outside Layer G01 16mm gypsum board, !- Layer #2 Nonres_Exterior_Wall_Insulation, !- Layer #3 G01 16mm gypsum board; !- Layer #4 Construction, res_ext_wall, !- Name F07 25mm stucco, !- Outside Layer G01 16mm gypsum board, !- Layer #1 Res_Exterior_Wall_Insulation, !- Layer #2 G01 16mm gypsum board; !- Layer #3 Construction, semiheated_ext_wall, !- Name F07 25mm stucco, !- Outside Layer G01 16mm gypsum board, !- Layer #1 Semiheated_Exterior_Wall_Insulation, !- Layer #2 G01 16mm gypsum board; !- Layer #3 Construction, nonres_floor, !- Name Nonres_Floor_Insulation, !- Outside Layer 100mm Normalweight concrete floor, !- Layer #1 CP02 CARPET PAD; !- Layer #2 Construction, res_floor, !- Name Res_Floor_Insulation, !- Outside Layer 100mm Normalweight concrete floor, !- Layer #1 CP02 CARPET PAD; !- Layer #2 Construction, semiheated_floor, !- Name Semiheated_Floor_Insulation, !- Outside Layer 100mm Normalweight concrete floor, !- Layer #1 CP02 CARPET PAD; !- Layer #2 Construction, nonres_floor_ceiling, !- Name - reverse ordered layers for nonres_floor CP02 CARPET PAD, !- Outside Layer 100mm Normalweight concrete floor, !- Layer #1 Nonres_Floor_Insulation; !- Layer #2 Construction, res_floor_ceiling, !- Name - reverse ordered layers for res_floor CP02 CARPET PAD, !- Outside Layer 100mm Normalweight concrete floor, !- Layer #1 Res_Floor_Insulation; !- Layer #2 Construction, semiheated_floor_ceiling, !- Name - reverse ordered layers for semiheated_floor CP02 CARPET PAD, !- Outside Layer 100mm Normalweight concrete floor, !- Layer #1 Semiheated_Floor_Insulation; !- Layer #2 !- =========== ALL OBJECTS IN CLASS: WINDOWMATERIAL:SIMPLEGLAZINGSYSTEM =========== WindowMaterial:SimpleGlazingSystem, Nonres Window Glazing Layer, !- Name 1.987391, !- U-Factor {W/m2-K} 0.38, !- Solar Heat Gain Coefficient 0.418; !- Visible Transmittance Construction, NonresWindow_U_0.35_SHGC_0.38, !- Name Nonres Window Glazing Layer; !- Outside Layer WindowMaterial:SimpleGlazingSystem, Nonres Skylight Glazing Layer, !- Name 2.6687822, !- U-Factor {W/m2-K} 0.4, !- Solar Heat Gain Coefficient 0.4; Construction, NonresSkylight_U_0.47_SHGC_0.4, !- Name Nonres Skylight Glazing Layer; !- Outside Layer WindowProperty:FrameAndDivider, Skylight_Frame, !- Name 0, !- Frame Width {m} , !- Frame Outside Projection {m} , !- Frame Inside Projection {m} 0, !- Frame Conductance {W/m2-K} 1, !- Ratio of Frame-Edge Glass Conductance to Center-Of-Glass Conductance 0.7, !- Frame Solar Absorptance 0.7, !- Frame Visible Absorptance 0.9, !- Frame Thermal Hemispherical Emissivity , !- Divider Type , !- Divider Width {m} , !- Number of Horizontal Dividers , !- Number of Vertical Dividers , !- Divider Outside Projection {m} , !- Divider Inside Projection {m} , !- Divider Conductance {W/m2-K} 1, !- Ratio of Divider-Edge Glass Conductance to Center-Of-Glass Conductance , !- Divider Solar Absorptance , !- Divider Visible Absorptance 0.9; !- Divider Thermal Hemispherical Emissivity !- =========== ALL OBJECTS IN CLASS: SCHEDULETYPELIMITS =========== ScheduleTypeLimits, Any Number; !- Name ScheduleTypeLimits, Fraction, !- Name 0.0, !- Lower Limit Value 1.0, !- Upper Limit Value CONTINUOUS; !- Numeric Type ScheduleTypeLimits, Temperature, !- Name -60, !- Lower Limit Value 200, !- Upper Limit Value CONTINUOUS; !- Numeric Type ScheduleTypeLimits, On/Off, !- Name 0, !- Lower Limit Value 1, !- Upper Limit Value DISCRETE; !- Numeric Type ScheduleTypeLimits, Control Type, !- Name 0, !- Lower Limit Value 4, !- Upper Limit Value DISCRETE; !- Numeric Type ScheduleTypeLimits, Humidity, !- Name 10, !- Lower Limit Value 90, !- Upper Limit Value CONTINUOUS; !- Numeric Type ScheduleTypeLimits, Number; !- Name !- =========== ALL OBJECTS IN CLASS: SCHEDULE:COMPACT =========== Schedule:Compact, BLDG_LIGHT_BATH_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 6/30, !- Field 1 For: Weekdays, !- Field 2 Until: 7:00,0.1773, !- Field 3 Until: 8:00,0.9, !- Field 4 Until: 21:00,0.594, !- Field 5 Until: 24:00,0.1773, !- Field 6 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 7 Until: 24:00,0.1773, !- Field 8 Through: 9/1, !- Field 9 For: Weekdays, !- Field 10 Until: 8:00,0.1773, !- Field 11 Until: 20:00,0.33, !- Field 12 Until: 21:00,0.117018, !- Field 13 Until: 24:00,0.1773, !- Field 14 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 15 Until: 24:00,0.1773, !- Field 16 Through: 12/31, !- Field 17 For: Weekdays, !- Field 18 Until: 7:00,0.1773, !- Field 19 Until: 8:00,0.9, !- Field 20 Until: 21:00,0.594, !- Field 21 Until: 24:00,0.1773, !- Field 22 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 23 Until: 24:00,0.1773; !- Field 24 Schedule:Compact, BLDG_LIGHT_CLASSROOM_SCH,!- Name Fraction, !- Schedule Type Limits Name Through: 6/30, !- Field 1 For: Weekdays, !- Field 2 Until: 7:00,0.1773, !- Field 3 Until: 8:00,0.9, !- Field 4 Until: 21:00,0.5982912, !- Field 5 Until: 24:00,0.1773, !- Field 6 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 7 Until: 24:00,0.1773, !- Field 8 Through: 9/1, !- Field 9 For: Weekdays, !- Field 10 Until: 8:00,0.1773, !- Field 11 Until: 20:00,0.332384, !- Field 12 Until: 21:00,0.1178633664, !- Field 13 Until: 24:00,0.1773, !- Field 14 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 15 Until: 24:00,0.1773, !- Field 16 Through: 12/31, !- Field 17 For: Weekdays, !- Field 18 Until: 7:00,0.1773, !- Field 19 Until: 8:00,0.9, !- Field 20 Until: 21:00,0.5982912, !- Field 21 Until: 24:00,0.1773, !- Field 22 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 23 Until: 24:00,0.1773; !- Field 24 Schedule:Compact, BLDG_LIGHT_CORRIDOR_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 6/30, !- Field 1 For: Weekdays, !- Field 2 Until: 7:00,0.1773, !- Field 3 Until: 8:00,0.9, !- Field 4 Until: 21:00,0.551772, !- Field 5 Until: 24:00,0.1773, !- Field 6 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 7 Until: 24:00,0.1773, !- Field 8 Through: 9/1, !- Field 9 For: Weekdays, !- Field 10 Until: 8:00,0.1773, !- Field 11 Until: 20:00,0.30654, !- Field 12 Until: 21:00,0.108699084, !- Field 13 Until: 24:00,0.1773, !- Field 14 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 15 Until: 24:00,0.1773, !- Field 16 Through: 12/31, !- Field 17 For: Weekdays, !- Field 18 Until: 7:00,0.1773, !- Field 19 Until: 8:00,0.9, !- Field 20 Until: 21:00,0.551772, !- Field 21 Until: 24:00,0.1773, !- Field 22 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 23 Until: 24:00,0.1773; !- Field 24 Schedule:Compact, BLDG_LIGHT_GYM_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 6/30, !- Field 1 For: Weekdays, !- Field 2 Until: 7:00,0.1773, !- Field 3 Until: 8:00,0.9, !- Field 4 Until: 21:00,0.88182, !- Field 5 Until: 24:00,0.1773, !- Field 6 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 7 Until: 24:00,0.1773, !- Field 8 Through: 9/1, !- Field 9 For: Weekdays, !- Field 10 Until: 8:00,0.1773, !- Field 11 Until: 20:00,0.4899, !- Field 12 Until: 21:00,0.17371854, !- Field 13 Until: 24:00,0.1773, !- Field 14 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 15 Until: 24:00,0.1773, !- Field 16 Through: 12/31, !- Field 17 For: Weekdays, !- Field 18 Until: 7:00,0.1773, !- Field 19 Until: 8:00,0.9, !- Field 20 Until: 21:00,0.88182, !- Field 21 Until: 24:00,0.1773, !- Field 22 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 23 Until: 24:00,0.1773; !- Field 24 Schedule:Compact, BLDG_LIGHT_LIBRARY_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 6/30, !- Field 1 For: Weekdays, !- Field 2 Until: 7:00,0.1773, !- Field 3 Until: 8:00,0.9, !- Field 4 Until: 21:00,0.8325, !- Field 5 Until: 24:00,0.1773, !- Field 6 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 7 Until: 24:00,0.1773, !- Field 8 Through: 9/1, !- Field 9 For: Weekdays, !- Field 10 Until: 8:00,0.1773, !- Field 11 Until: 20:00,0.4625, !- Field 12 Until: 21:00,0.1640025, !- Field 13 Until: 24:00,0.1773, !- Field 14 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 15 Until: 24:00,0.1773, !- Field 16 Through: 12/31, !- Field 17 For: Weekdays, !- Field 18 Until: 7:00,0.1773, !- Field 19 Until: 8:00,0.9, !- Field 20 Until: 21:00,0.8325, !- Field 21 Until: 24:00,0.1773, !- Field 22 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 23 Until: 24:00,0.1773; !- Field 24 Schedule:Compact, BLDG_LIGHT_LOBBYFLR1_SCH,!- Name Fraction, !- Schedule Type Limits Name Through: 6/30, !- Field 1 For: Weekdays, !- Field 2 Until: 7:00,0.1773, !- Field 3 Until: 8:00,0.9, !- Field 4 Until: 21:00,0.855, !- Field 5 Until: 24:00,0.1773, !- Field 6 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 7 Until: 24:00,0.1773, !- Field 8 Through: 9/1, !- Field 9 For: Weekdays, !- Field 10 Until: 8:00,0.1773, !- Field 11 Until: 20:00,0.475, !- Field 12 Until: 21:00,0.168435, !- Field 13 Until: 24:00,0.1773, !- Field 14 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 15 Until: 24:00,0.1773, !- Field 16 Through: 12/31, !- Field 17 For: Weekdays, !- Field 18 Until: 7:00,0.1773, !- Field 19 Until: 8:00,0.9, !- Field 20 Until: 21:00,0.855, !- Field 21 Until: 24:00,0.1773, !- Field 22 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 23 Until: 24:00,0.1773; !- Field 24 Schedule:Compact, BLDG_LIGHT_MECHANIC_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 6/30, !- Field 1 For: Weekdays, !- Field 2 Until: 7:00,0.1773, !- Field 3 Until: 21:00,0.9, !- Field 4 Until: 24:00,0.1773, !- Field 5 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 6 Until: 24:00,0.1773, !- Field 7 Through: 9/1, !- Field 8 For: Weekdays, !- Field 9 Until: 8:00,0.1773, !- Field 10 Until: 20:00,0.5, !- Field 11 Until: 24:00,0.1773, !- Field 12 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 13 Until: 24:00,0.1773, !- Field 14 Through: 12/31, !- Field 15 For: Weekdays, !- Field 16 Until: 7:00,0.1773, !- Field 17 Until: 21:00,0.9, !- Field 18 Until: 24:00,0.1773, !- Field 19 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 20 Until: 24:00,0.1773; !- Field 21 Schedule:Compact, BLDG_LIGHT_MISC_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 6/30, !- Field 1 For: Weekdays, !- Field 2 Until: 7:00,0.1773, !- Field 3 Until: 21:00,0.9, !- Field 4 Until: 24:00,0.1773, !- Field 5 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 6 Until: 24:00,0.1773, !- Field 7 Through: 9/1, !- Field 8 For: Weekdays, !- Field 9 Until: 8:00,0.1773, !- Field 10 Until: 20:00,0.5, !- Field 11 Until: 24:00,0.1773, !- Field 12 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 13 Until: 24:00,0.1773, !- Field 14 Through: 12/31, !- Field 15 For: Weekdays, !- Field 16 Until: 7:00,0.1773, !- Field 17 Until: 21:00,0.9, !- Field 18 Until: 24:00,0.1773, !- Field 19 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 20 Until: 24:00,0.1773; !- Field 21 Schedule:Compact, BLDG_LIGHT_OFFICE_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 6/30, !- Field 1 For: Weekdays, !- Field 2 Until: 7:00,0.1773, !- Field 3 Until: 8:00,0.9, !- Field 4 Until: 21:00,0.7479585, !- Field 5 Until: 24:00,0.1773, !- Field 6 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 7 Until: 24:00,0.1773, !- Field 8 Through: 9/1, !- Field 9 For: Weekdays, !- Field 10 Until: 8:00,0.1773, !- Field 11 Until: 20:00,0.4155325, !- Field 12 Until: 21:00,0.1473478245, !- Field 13 Until: 24:00,0.1773, !- Field 14 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 15 Until: 24:00,0.1773, !- Field 16 Through: 12/31, !- Field 17 For: Weekdays, !- Field 18 Until: 7:00,0.1773, !- Field 19 Until: 8:00,0.9, !- Field 20 Until: 21:00,0.7479585, !- Field 21 Until: 24:00,0.1773, !- Field 22 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 23 Until: 24:00,0.1773; !- Field 24 Schedule:Compact, BLDG_LIGHT_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 6/30, !- Field 1 For: Weekdays, !- Field 2 Until: 7:00,0.1773, !- Field 3 Until: 21:00,0.9, !- Field 4 Until: 24:00,0.1773, !- Field 5 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 6 Until: 24:00,0.1773, !- Field 7 Through: 9/1, !- Field 8 For: Weekdays, !- Field 9 Until: 8:00,0.1773, !- Field 10 Until: 20:00,0.5, !- Field 11 Until: 24:00,0.1773, !- Field 12 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 13 Until: 24:00,0.1773, !- Field 14 Through: 12/31, !- Field 15 For: Weekdays, !- Field 16 Until: 7:00,0.1773, !- Field 17 Until: 21:00,0.9, !- Field 18 Until: 24:00,0.1773, !- Field 19 For: SummerDesignDay, Until: 24:00, 1, For: WinterDesignDay, Until: 24:00, 0, For: WeekEnds Holidays AllOtherDays, !- Field 20 Until: 24:00,0.1773; !- Field 21 Schedule:Compact, BLDG_EQUIP_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 6/30, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 08:00,0.35, !- Field 3 Until: 17:00,0.95, !- Field 5 Until: 24:00,0.35, !- Field 7 For: WinterDesignDay, !- Field 9 Until: 24:00,0.35, !- Field 10 For: Weekdays, !- Field 2 Until: 08:00,0.29562366715, !- Field 3 Until: 17:00,0.90367002475, !- Field 5 Until: 21:00,0.33293106175, !- Field 7 Until: 24:00,0.29562366715, !- Field 7 For: WeekEnds Holidays AllOtherDays, !- Field 9 Until: 24:00,0.29562366715, !- Field 10 Through: 9/1, !- Field 12 For: SummerDesignDay, !- Field 13 Until: 08:00,0.25, !- Field 14 Until: 17:00,0.50, !- Field 16 Until: 24:00,0.25, !- Field 18 For: WinterDesignDay, !- Field 20 Until: 24:00,0.25, !- Field 21 For: Weekdays, !- Field 13 Until: 08:00,0.21115976225, !- Field 14 Until: 17:00,0.4756158025, !- Field 16 Until: 21:00,0.23780790125, !- Field 18 Until: 24:00,0.21115976225, !- Field 18 For: WeekEnds Holidays AllOtherDays, !- Field 20 Until: 24:00,0.21115976225, !- Field 21 Through: 12/31, !- Field 23 For: SummerDesignDay, !- Field 24 Until: 08:00,0.35, !- Field 25 Until: 17:00,0.95, !- Field 27 Until: 24:00,0.35, !- Field 29 For: WinterDesignDay, !- Field 31 Until: 24:00,0.35, !- Field 32 For: Weekdays , !- Field 24 Until: 08:00,0.29562366715, !- Field 25 Until: 17:00,0.90367002475, !- Field 27 Until: 21:00,0.33293106175, !- Field 29 Until: 24:00,0.29562366715, !- Field 29 For: WeekEnds Holidays AllOtherDays, !- Field 31 Until: 24:00,0.29562366715; !- Field 32 Schedule:Compact, KITCHEN_ELEC_EQUIP_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 6/30, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 08:00,0.1, !- Field 3 Until: 10:00,0.15, !- Field 5 Until: 13:00,0.25, !- Field 7 Until: 15:00,0.15, !- Field 9 Until: 24:00,0.1, !- Field 11 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 13 Until: 24:00,0.1, !- Field 14 Through: 9/1, !- Field 16 For: Weekdays SummerDesignDay, !- Field 17 Until: 08:00,0.1, !- Field 18 Until: 10:00,0.15, !- Field 20 Until: 13:00,0.25, !- Field 22 Until: 15:00,0.15, !- Field 24 Until: 24:00,0.1, !- Field 26 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 28 Until: 24:00,0.1, !- Field 29 Through: 12/31, !- Field 31 For: Weekdays SummerDesignDay, !- Field 32 Until: 08:00,0.1, !- Field 33 Until: 10:00,0.15, !- Field 35 Until: 13:00,0.25, !- Field 37 Until: 15:00,0.15, !- Field 39 Until: 24:00,0.1, !- Field 41 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 43 Until: 24:00,0.1; !- Field 44 Schedule:Compact, KITCHEN_GAS_EQUIP_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 6/30, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 08:00,0.02, !- Field 3 Until: 10:00,0.15, !- Field 5 Until: 13:00,0.2, !- Field 7 Until: 15:00,0.1, !- Field 9 Until: 24:00,0.02, !- Field 11 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 13 Until: 24:00,0.02, !- Field 14 Through: 9/1, !- Field 16 For: Weekdays SummerDesignDay, !- Field 17 Until: 08:00,0.02, !- Field 18 Until: 10:00,0.15, !- Field 20 Until: 13:00,0.2, !- Field 22 Until: 15:00,0.1, !- Field 24 Until: 24:00,0.02, !- Field 26 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 28 Until: 24:00,0.02, !- Field 29 Through: 12/31, !- Field 31 For: Weekdays SummerDesignDay, !- Field 32 Until: 08:00,0.02, !- Field 33 Until: 10:00,0.15, !- Field 35 Until: 13:00,0.2, !- Field 37 Until: 15:00,0.1, !- Field 39 Until: 24:00,0.02, !- Field 41 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 43 Until: 24:00,0.02; !- Field 44 Schedule:Compact, BLDG_ELEVATORS, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,0.30, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,0.00, !- Field 6 For: Weekdays, !- Field 8 Until: 08:00,0.00, !- Field 9 Until: 15:00,0.30, !- Field 11 Until: 16:00,0.15, !- Field 13 Until: 24:00,0.00, !- Field 15 For: AllOtherDays, !- Field 17 Until: 24:00,0.00; !- Field 18 Schedule:Compact, ELEV_LIGHT_FAN_SCH_24_7, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1; !- Field 3 Schedule:Compact, ELEV_LIGHT_FAN_SCH_ADD_DF, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,0.30, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,0.00, !- Field 6 For: Weekdays, !- Field 8 Until: 08:00,0.00, !- Field 9 Until: 15:00,0.30, !- Field 11 Until: 16:00,0.15, !- Field 13 Until: 24:00,0.00, !- Field 15 For: AllOtherDays, !- Field 17 Until: 24:00,0.00; !- Field 18 Schedule:Compact, BLDG_OCC_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 6/15, !- Field 1 For: Weekdays, !- Field 2 Until: 08:00,0, !- Field 3 Until: 16:00,0.95, !- Field 5 Until: 21:00,0.15, !- Field 7 Until: 24:00,0, !- Field 9 For: SummerDesignDay, !- Field 2 Until: 08:00,0.000000001, !- Field 3 Until: 16:00,0.95, !- Field 5 Until: 21:00,0.15, !- Field 7 Until: 24:00,0.000000001, !- Field 9 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 11 Until: 24:00,0, !- Field 12 Through: 9/15, !- Field 14 For: Weekdays, !- Field 15 Until: 08:00,0, !- Field 16 Until: 16:00,0.15, !- Field 18 Until: 21:00,0.15, !- Field 20 Until: 24:00,0, !- Field 22 For: SummerDesignDay, !- Field 15 Until: 08:00,0.000000001, !- Field 16 Until: 16:00,0.15, !- Field 18 Until: 21:00,0.15, !- Field 20 Until: 24:00,0.000000001, !- Field 22 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 24 Until: 24:00,0, !- Field 25 Through: 12/31, !- Field 27 For: Weekdays, !- Field 28 Until: 08:00,0, !- Field 29 Until: 16:00,0.95, !- Field 31 Until: 21:00,0.15, !- Field 33 Until: 24:00,0, !- Field 35 For: SummerDesignDay, !- Field 28 Until: 08:00,0.000000001, !- Field 29 Until: 16:00,0.95, !- Field 31 Until: 21:00,0.15, !- Field 33 Until: 24:00,0.000000001, !- Field 35 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 37 Until: 24:00,0; !- Field 38 Schedule:Compact, BLDG_OCC_SCH_Extend, !- Name Fraction, !- Schedule Type Limits Name Through: 6/30, !- Field 1 For: Weekdays, !- Field 2 Until: 08:00,0, !- Field 3 Until: 16:00,0.95, !- Field 5 Until: 21:00,0.95, !- Field 7 Until: 24:00,0, !- Field 9 For: SummerDesignDay, !- Field 2 Until: 08:00,0.000000001, !- Field 3 Until: 16:00,0.95, !- Field 5 Until: 21:00,0.95, !- Field 7 Until: 24:00,0.000000001, !- Field 9 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 11 Until: 24:00,0, !- Field 12 Through: 9/1, !- Field 14 For: Weekdays, !- Field 15 Until: 08:00,0, !- Field 16 Until: 17:00,0.5, !- Field 18 Until: 21:00,0.5, !- Field 20 Until: 24:00,0, !- Field 22 For: SummerDesignDay, !- Field 15 Until: 08:00,0.000000001, !- Field 16 Until: 17:00,0.5, !- Field 18 Until: 21:00,0.5, !- Field 20 Until: 24:00,0.000000001, !- Field 22 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 24 Until: 24:00,0, !- Field 25 Through: 12/31, !- Field 27 For: Weekdays, !- Field 28 Until: 08:00,0, !- Field 29 Until: 17:00,0.95, !- Field 31 Until: 21:00,0.95, !- Field 33 Until: 24:00,0, !- Field 35 For: SummerDesignDay, !- Field 28 Until: 08:00,0.000000001, !- Field 29 Until: 17:00,0.95, !- Field 31 Until: 21:00,0.95, !- Field 33 Until: 24:00,0.000000001, !- Field 35 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 37 Until: 24:00,0; !- Field 38 Schedule:Compact, BLDG_OCC_SCH_Offices, !- Name Fraction, !- Schedule Type Limits Name Through: 6/30, !- Field 1 For: Weekdays, !- Field 2 Until: 08:00,0, !- Field 3 Until: 17:00,0.95, !- Field 5 Until: 21:00,0.15, !- Field 7 Until: 24:00,0, !- Field 9 For: SummerDesignDay, !- Field 2 Until: 08:00,0.000000001, !- Field 3 Until: 17:00,0.95, !- Field 5 Until: 21:00,0.15, !- Field 7 Until: 24:00,0.000000001, !- Field 9 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 11 Until: 24:00,0, !- Field 12 Through: 9/1, !- Field 14 For: Weekdays, !- Field 15 Until: 08:00,0, !- Field 16 Until: 17:00,0.5, !- Field 18 Until: 21:00,0.15, !- Field 20 Until: 24:00,0, !- Field 22 For: SummerDesignDay, !- Field 15 Until: 08:00,0.000000001, !- Field 16 Until: 17:00,0.5, !- Field 18 Until: 21:00,0.15, !- Field 20 Until: 24:00,0.000000001, !- Field 22 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 24 Until: 24:00,0, !- Field 25 Through: 12/31, !- Field 27 For: Weekdays, !- Field 28 Until: 08:00,0, !- Field 29 Until: 17:00,0.95, !- Field 31 Until: 21:00,0.15, !- Field 33 Until: 24:00,0, !- Field 35 For: SummerDesignDay, !- Field 28 Until: 08:00,0.000000001, !- Field 29 Until: 17:00,0.95, !- Field 31 Until: 21:00,0.15, !- Field 33 Until: 24:00,0.000000001, !- Field 35 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 37 Until: 24:00,0; !- Field 38 Schedule:Compact, BLDG_OCC_SCH_Offices_w_SB, !-Name Fraction, !-Schedule Type Limits Name Through: 6/30, For: Weekdays, Until: 01:00, 0, Until: 02:00, 0, Until: 03:00, 0, Until: 04:00, 0, Until: 05:00, 0, Until: 06:00, 0, Until: 07:00, 0, Until: 08:00, 0, Until: 09:00, 0.95, Until: 10:00, 0.95, Until: 11:00, 0.95, Until: 12:00, 0.95, Until: 13:00, 0, Until: 14:00, 0.95, Until: 15:00, 0, Until: 16:00, 0.95, Until: 17:00, 0.95, Until: 18:00, 0.15, Until: 19:00, 0.15, Until: 20:00, 0.15, Until: 21:00, 0.15, Until: 22:00, 0, Until: 23:00, 0, Until: 24:00, 0, For: SummerDesignDay, Until: 08:00,0.000000001, Until: 17:00,0.95, Until: 21:00,0.15, Until: 24:00,0.000000001, For: WeekEnds Holidays AllOtherDays, Until: 24:00,0, Through: 9/1, For: Weekdays, Until: 01:00, 0, Until: 02:00, 0, Until: 03:00, 0, Until: 04:00, 0, Until: 05:00, 0, Until: 06:00, 0, Until: 07:00, 0, Until: 08:00, 0, Until: 09:00, 0.5, Until: 10:00, 0.5, Until: 11:00, 0.5, Until: 12:00, 0, Until: 13:00, 0.5, Until: 14:00, 0.5, Until: 15:00, 0, Until: 16:00, 0.5, Until: 17:00, 0.5, Until: 18:00, 0.15, Until: 19:00, 0.15, Until: 20:00, 0.15, Until: 21:00, 0.15, Until: 22:00, 0, Until: 23:00, 0, Until: 24:00, 0, For: SummerDesignDay, Until: 08:00,0.000000001, Until: 17:00,0.5, Until: 21:00,0.15, Until: 24:00,0.000000001, For: WeekEnds Holidays AllOtherDays, Until: 24:00,0, Through: 12/31, For: Weekdays, Until: 01:00, 0, Until: 02:00, 0, Until: 03:00, 0, Until: 04:00, 0, Until: 05:00, 0, Until: 06:00, 0, Until: 07:00, 0, Until: 08:00, 0, Until: 09:00, 0.95, Until: 10:00, 0.95, Until: 11:00, 0.95, Until: 12:00, 0.95, Until: 13:00, 0, Until: 14:00, 0.95, Until: 15:00, 0, Until: 16:00, 0.95, Until: 17:00, 0.95, Until: 18:00, 0.15, Until: 19:00, 0.15, Until: 20:00, 0.15, Until: 21:00, 0.15, Until: 22:00, 0, Until: 23:00, 0, Until: 24:00, 0, For: SummerDesignDay, Until: 08:00,0.000000001, Until: 17:00,0.95, Until: 21:00,0.15, Until: 24:00,0.000000001, For: WeekEnds WinterDesignDay Holidays AllOtherDays, Until: 24:00,0; Schedule:Compact, Offices Binary Occupancy, !-Name Fraction, !-Schedule Type Limits Name Through: 6/30, For: Weekdays, Until: 01:00, 0, Until: 02:00, 0, Until: 03:00, 0, Until: 04:00, 0, Until: 05:00, 0, Until: 06:00, 0, Until: 07:00, 0, Until: 08:00, 0, Until: 09:00, 1, Until: 10:00, 1, Until: 11:00, 1, Until: 12:00, 1, Until: 13:00, 1, Until: 14:00, 1, Until: 15:00, 1, Until: 16:00, 1, Until: 17:00, 1, Until: 18:00, 1, Until: 19:00, 1, Until: 21:00, 1, Until: 21:00, 1, Until: 22:00, 0, Until: 23:00, 0, Until: 24:00, 0, For: SummerDesignDay, Until: 08:00,0.000000001, Until: 17:00,0.95, Until: 21:00,0.15, Until: 24:00,0.000000001, For: WeekEnds Holidays AllOtherDays, Until: 24:00,0, Through: 9/1, For: Weekdays, Until: 01:00, 0, Until: 02:00, 0, Until: 03:00, 0, Until: 04:00, 0, Until: 05:00, 0, Until: 06:00, 0, Until: 07:00, 0, Until: 08:00, 0, Until: 09:00, 1, Until: 10:00, 1, Until: 11:00, 1, Until: 12:00, 1, Until: 13:00, 1, Until: 14:00, 1, Until: 15:00, 1, Until: 16:00, 1, Until: 17:00, 1, Until: 18:00, 1, Until: 19:00, 1, Until: 20:00, 1, Until: 21:00, 1, Until: 22:00, 0, Until: 23:00, 0, Until: 24:00, 0, For: SummerDesignDay, Until: 08:00,0.000000001, Until: 17:00,0.5, Until: 21:00,0.15, Until: 24:00,0.000000001, For: WeekEnds Holidays AllOtherDays, Until: 24:00,0, Through: 12/31, For: Weekdays, Until: 01:00, 0, Until: 02:00, 0, Until: 03:00, 0, Until: 04:00, 0, Until: 05:00, 0, Until: 06:00, 0, Until: 07:00, 0, Until: 08:00, 0, Until: 09:00, 1, Until: 10:00, 1, Until: 11:00, 1, Until: 12:00, 1, Until: 13:00, 1, Until: 14:00, 1, Until: 15:00, 1, Until: 16:00, 1, Until: 17:00, 1, Until: 18:00, 1, Until: 19:00, 1, Until: 20:00, 1, Until: 21:00, 1, Until: 22:00, 0, Until: 23:00, 0, Until: 24:00, 0, For: SummerDesignDay, Until: 08:00,0.000000001, Until: 17:00,0.95, Until: 21:00,0.15, Until: 24:00,0.000000001, For: WeekEnds WinterDesignDay Holidays AllOtherDays, Until: 24:00,0; Schedule:Compact, BLDG_OCC_SCH_Gym, !- Name Fraction, !- Schedule Type Limits Name Through: 6/30, !- Field 1 For: Weekdays, !- Field 2 Until: 08:00,0, !- Field 3 Until: 16:00,0.35, !- Field 5 Until: 21:00,0.95, !- Field 7 Until: 24:00,0, !- Field 9 For: SummerDesignDay, !- Field 2 Until: 08:00,0.000000001, !- Field 3 Until: 16:00,0.35, !- Field 5 Until: 21:00,0.95, !- Field 7 Until: 24:00,0.000000001, !- Field 9 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 11 Until: 24:00,0, !- Field 12 Through: 9/1, !- Field 14 For: Weekdays, !- Field 15 Until: 08:00,0, !- Field 16 Until: 16:00,0.35, !- Field 18 Until: 21:00,0.35, !- Field 20 Until: 24:00,0, !- Field 22 For: SummerDesignDay, !- Field 15 Until: 08:00,0.000000001, !- Field 16 Until: 16:00,0.35, !- Field 18 Until: 21:00,0.35, !- Field 20 Until: 24:00,0.000000001, !- Field 22 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 24 Until: 24:00,0, !- Field 25 Through: 12/31, !- Field 27 For: Weekdays, !- Field 28 Until: 08:00,0, !- Field 29 Until: 16:00,0.35, !- Field 31 Until: 21:00,0.95, !- Field 33 Until: 24:00,0, !- Field 35 For: SummerDesignDay, !- Field 28 Until: 08:00,0.000000001, !- Field 29 Until: 16:00,0.35, !- Field 31 Until: 21:00,0.95, !- Field 33 Until: 24:00,0.000000001, !- Field 35 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 37 Until: 24:00,0; !- Field 38 Schedule:Compact, BLDG_OCC_SCH_Auditorium, !- Name Fraction, !- Schedule Type Limits Name Through: 6/30, !- Field 1 For: Weekdays, !- Field 2 Until: 08:00,0, !- Field 3 Until: 15:00,0.25, !- Field 5 Until: 20:00,0.95, !- Field 7 Until: 24:00,0, !- Field 9 For: SummerDesignDay, !- Field 2 Until: 08:00,0.000000001, !- Field 3 Until: 15:00,0.25, !- Field 5 Until: 20:00,0.95, !- Field 7 Until: 24:00,0.000000001, !- Field 9 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 11 Until: 24:00,0, !- Field 12 Through: 9/1, !- Field 14 For: Weekdays, !- Field 15 Until: 08:00,0, !- Field 16 Until: 17:00,0.15, !- Field 18 Until: 19:00,0.35, !- Field 20 Until: 24:00,0, !- Field 22 For: SummerDesignDay, !- Field 15 Until: 08:00,0.000000001, !- Field 16 Until: 17:00,0.15, !- Field 18 Until: 19:00,0.35, !- Field 20 Until: 24:00,0.000000001, !- Field 22 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 24 Until: 24:00,0, !- Field 25 Through: 12/31, !- Field 27 For: Weekdays, !- Field 28 Until: 08:00,0, !- Field 29 Until: 15:00,0.25, !- Field 31 Until: 20:00,0.95, !- Field 33 Until: 24:00,0, !- Field 35 For: SummerDesignDay, !- Field 28 Until: 08:00,0.000000001, !- Field 29 Until: 15:00,0.25, !- Field 31 Until: 20:00,0.95, !- Field 33 Until: 24:00,0.000000001, !- Field 35 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 37 Until: 24:00,0; !- Field 38 Schedule:Compact, BLDG_OCC_SCH_Cafeteria, !- Name Fraction, !- Schedule Type Limits Name Through: 6/30, !- Field 1 For: Weekdays, !- Field 2 Until: 09:00,0, !- Field 3 Until: 15:00,0.95, !- Field 5 Until: 20:00,0.35, !- Field 7 Until: 24:00,0, !- Field 9 For: SummerDesignDay, !- Field 2 Until: 09:00,0.000000001, !- Field 3 Until: 15:00,0.95, !- Field 5 Until: 20:00,0.35, !- Field 7 Until: 24:00,0.000000001, !- Field 9 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 11 Until: 24:00,0, !- Field 12 Through: 9/1, !- Field 14 For: Weekdays, !- Field 15 Until: 09:00,0, !- Field 16 Until: 17:00,0.15, !- Field 18 Until: 19:00,0.35, !- Field 20 Until: 24:00,0, !- Field 22 For: SummerDesignDay, !- Field 15 Until: 09:00,0.000000001, !- Field 16 Until: 17:00,0.15, !- Field 18 Until: 19:00,0.35, !- Field 20 Until: 24:00,0.000000001, !- Field 22 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 24 Until: 24:00,0, !- Field 25 Through: 12/31, !- Field 27 For: Weekdays, !- Field 28 Until: 09:00,0, !- Field 29 Until: 15:00,0.95, !- Field 31 Until: 20:00,0.35, !- Field 33 Until: 24:00,0, !- Field 35 For: SummerDesignDay, !- Field 28 Until: 09:00,0.000000001, !- Field 29 Until: 15:00,0.95, !- Field 31 Until: 20:00,0.35, !- Field 33 Until: 24:00,0.000000001, !- Field 35 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 37 Until: 24:00,0; !- Field 38 Schedule:Compact, INFIL_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 07:00,1, !- Field 3 Until: 21:00,0.25, !- Field 5 Until: 24:00,1; !- Field 7 Schedule:Compact, INFIL_SCH_PNNL, !- Name fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 07:00,1.0, !- Field 3 Until: 21:00,0.25, !- Field 5 Until: 24:00,1.0, !- Field 7 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 9 Until: 24:00,1.0; !- Field 10 Schedule:Compact, INFIL_Door_Opening_SCH, !- Name fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 07:00,0.0, !- Field 3 Until: 08:00,1.0, !- Field 5 Until: 15:00, 0.144, !- Field 8 Until: 17:00,1.0, !- Field 9 Until: 19:00, 0.144, !- Field 12 Until: 24:00,0.0, !- Field 13 For: Saturday Sunday Holidays AllOtherDays, !- Field 15 Until: 24:00,0.0; !- Field 16 Schedule:Compact, Booster Water Inlet Temp Schedule, !- Name Any Number, !- Schedule Type Limits Name THROUGH: 12/31, !- Field 1 FOR: AllDays, !- Field 2 UNTIL: 24:00,60.00; !- Field 3 Schedule:Compact, Booster Water Setpoint Temp Schedule, !- Name Any Number, !- Schedule Type Limits Name THROUGH: 12/31, !- Field 1 FOR: AllDays, !- Field 2 UNTIL: 24:00,82.22; !- Field 3 Schedule:Compact, BLDG_SWH_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 6/15, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 07:00,0.05, !- Field 3 Until: 08:00,0.1, !- Field 5 Until: 09:00,0.34, !- Field 7 Until: 10:00,0.6, !- Field 9 Until: 11:00,0.63, !- Field 11 Until: 12:00,0.72, !- Field 13 Until: 13:00,0.79, !- Field 15 Until: 14:00,0.83, !- Field 17 Until: 15:00,0.61, !- Field 19 Until: 16:00,0.65, !- Field 21 Until: 18:00,0.1, !- Field 23 Until: 19:00,0.19, !- Field 25 Until: 20:00,0.25, !- Field 27 Until: 22:00,0.22, !- Field 29 Until: 23:00,0.12, !- Field 31 Until: 24:00,0.09, !- Field 33 For: Weekdays, !- Field 35 Until: 07:00,0.00, !- Field 36 Until: 08:00,0.00, !- Field 38 Until: 09:00,0.34, !- Field 40 Until: 10:00,0.6, !- Field 42 Until: 11:00,0.63, !- Field 44 Until: 12:00,0.72, !- Field 46 Until: 13:00,0.79, !- Field 48 Until: 14:00,0.83, !- Field 50 Until: 15:00,0.61, !- Field 52 Until: 16:00,0.65, !- Field 54 Until: 18:00,0.1, !- Field 56 Until: 19:00,0.19, !- Field 58 Until: 20:00,0.25, !- Field 60 Until: 22:00,0.00, !- Field 62 Until: 23:00,0.00, !- Field 64 Until: 24:00,0.00, !- Field 66 For: WinterDesignDay, !- Field 68 Until: 09:00,0.03, !- Field 69 Until: 13:00,0.05, !- Field 71 Until: 24:00,0.03, !- Field 73 For: Saturday, !- Field 75 Until: 09:00,0.00, !- Field 76 Until: 13:00,0.00, !- Field 78 Until: 24:00,0.00, !- Field 80 For: Sunday Holidays AllOtherDays, !- Field 82 Until: 08:00,0.00, !- Field 83 Until: 14:00,0.00, !- Field 85 Until: 24:00,0.00, !- Field 87 Through: 9/15, !- Field 89 For: SummerDesignDay, !- Field 90 Until: 07:00,0.05, !- Field 91 Until: 18:00,0.1, !- Field 93 Until: 19:00,0.19, !- Field 95 Until: 20:00,0.25, !- Field 97 Until: 22:00,0.22, !- Field 99 Until: 23:00,0.12, !- Field 101 Until: 24:00,0.09, !- Field 103 For: Weekdays, !- Field 105 Until: 08:00,0.00, !- Field 106 Until: 18:00,0.1, !- Field 108 Until: 19:00,0.19, !- Field 110 Until: 20:00,0.25, !- Field 112 Until: 22:00,0.00, !- Field 114 Until: 23:00,0.00, !- Field 116 Until: 24:00,0.00, !- Field 118 For: WinterDesignDay, !- Field 120 Until: 09:00,0.03, !- Field 121 Until: 13:00,0.05, !- Field 123 Until: 24:00,0.03, !- Field 125 For: Saturday, !- Field 127 Until: 09:00,0.00, !- Field 128 Until: 13:00,0.00, !- Field 130 Until: 24:00,0.00, !- Field 132 For: Sunday Holidays AllOtherDays, !- Field 134 Until: 08:00,0.00, !- Field 135 Until: 14:00,0.00, !- Field 137 Until: 24:00,0.00, !- Field 139 Through: 12/31, !- Field 141 For: SummerDesignDay, !- Field 142 Until: 07:00,0.05, !- Field 143 Until: 08:00,0.1, !- Field 145 Until: 09:00,0.34, !- Field 147 Until: 10:00,0.6, !- Field 149 Until: 11:00,0.63, !- Field 151 Until: 12:00,0.72, !- Field 153 Until: 13:00,0.79, !- Field 155 Until: 14:00,0.83, !- Field 157 Until: 15:00,0.61, !- Field 159 Until: 16:00,0.65, !- Field 161 Until: 18:00,0.1, !- Field 163 Until: 19:00,0.19, !- Field 165 Until: 20:00,0.25, !- Field 167 Until: 22:00,0.22, !- Field 169 Until: 23:00,0.12, !- Field 171 Until: 24:00,0.09, !- Field 173 For: Weekdays, !- Field 175 Until: 07:00,0.00, !- Field 177 Until: 08:00,0.00, !- Field 179 Until: 09:00,0.34, !- Field 181 Until: 10:00,0.6, !- Field 183 Until: 11:00,0.63, !- Field 185 Until: 12:00,0.72, !- Field 187 Until: 13:00,0.79, !- Field 189 Until: 14:00,0.83, !- Field 191 Until: 15:00,0.61, !- Field 193 Until: 16:00,0.65, !- Field 195 Until: 18:00,0.1, !- Field 197 Until: 19:00,0.19, !- Field 199 Until: 20:00,0.25, !- Field 201 Until: 22:00,0.00, !- Field 203 Until: 23:00,0.00, !- Field 205 Until: 24:00,0.00, !- Field 207 For: WinterDesignDay, !- Field 209 Until: 09:00,0.03, !- Field 211 Until: 13:00,0.05, !- Field 213 Until: 24:00,0.03, !- Field 215 For: Saturday, !- Field 217 Until: 09:00,0.00, !- Field 219 Until: 13:00,0.00, !- Field 221 Until: 24:00,0.00, !- Field 223 For: Sunday Holidays AllOtherDays, !- Field 225 Until: 08:00,0.00, !- Field 227 Until: 14:00,0.00, !- Field 229 Until: 24:00,0.00; !- Field 231 Schedule:Compact, ALWAYS_ON, !- Name On/Off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1; !- Field 3 Schedule:Compact, Exterior_Lgt_ALWAYS_ON, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1; !- Field 3 Schedule:Compact, Exterior_Lgt_189_1, !- Name Fraction, !- Schedule Type Limits Name Through:12/31, !- Field 1 For:Weekdays, !- Field 2 Until: 9:00,0.5, !- Field 3 Until: 21:00,1.0, !- Field 5 Until: 24:00,0.5, !- Field 7 For:Saturday, !- Field 9 Until: 24:00,0.5, !- Field 10 For:Sunday Holidays AllOtherDays, !- Field 12 Until: 24:00,0.5; !- Field 13 Schedule:Compact, ALWAYS_OFF, !- Name On/Off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0; !- Field 3 Schedule:Compact, WORK_EFF_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0; !- Field 3 Schedule:Compact, AIR_VELO_SCH, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, CLOTHING_SCH, !- Name Any Number, !- Schedule Type Limits Name Through: 04/30, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1.1, !- Field 3 Through: 09/30, !- Field 5 For: AllDays, !- Field 6 Until: 24:00,0.6, !- Field 7 Through: 12/31, !- Field 9 For: AllDays, !- Field 10 Until: 24:00,1.1; !- Field 11 Schedule:Compact, SHADING_SCH, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0; !- Field 3 Schedule:Compact, PlantOnSched, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1; !- Field 3 Schedule:Compact, FAN_SCH, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1; !- Field 3 Schedule:Compact, ReheatCoilAvailSched, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1; !- Field 3 Schedule:Compact, CoolingCoilAvailSched, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1; !- Field 3 Schedule:Compact, Humidity Setpoint Schedule, !- Name Humidity, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,65; !- Field 3 Schedule:Compact, Dual Zone Control Type Sched, !- Name Control Type, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,4; !- Field 3 Schedule:Compact, Seasonal-Reset-Supply-Air-Temp-Sch, !- Name Temperature, !- Schedule Type Limits Name Through: 03/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,13, !- Field 3 Through: 09/30, !- Field 5 For: AllDays, !- Field 6 Until: 24:00,13, !- Field 7 Through: 12/31, !- Field 9 For: AllDays, !- Field 10 Until: 24:00,13; !- Field 11 Schedule:Compact, VAV-Supply-Air-Temp-Sch, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,12.8; !- Field 3 Schedule:Compact, CW-Loop-Temp-Schedule, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,6.7; !- Field 3 Schedule:Compact, HW-Loop-Temp-Schedule, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,82; !- Field 3 Schedule:Compact, Heating-Supply-Air-Temp-Sch, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,16; !- Field 3 Schedule:Compact, Kitchen_Exhaust_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 6/30, !- Field 1 For: Weekdays SummerDesignDay WinterDesignDay, !- Field 2 Until: 08:00,0, !- Field 3 Until: 17:00,1.0, !- Field 5 Until: 24:00,0, !- Field 7 For: WeekEnds Holidays AllOtherDays, !- Field 9 Until: 24:00,0, !- Field 10 Through: 9/1, !- Field 12 For: Weekdays SummerDesignDay WinterDesignDay, !- Field 13 Until: 08:00,0, !- Field 14 Until: 17:00,1.0, !- Field 16 Until: 21:00,1.0, !- Field 18 Until: 24:00,0, !- Field 20 For: WeekEnds Holidays AllOtherDays, !- Field 22 Until: 24:00,0, !- Field 23 Through: 12/31, !- Field 25 For: Weekdays SummerDesignDay WinterDesignDay, !- Field 26 Until: 08:00,0, !- Field 27 Until: 16:00,1.0, !- Field 29 Until: 21:00,1.0, !- Field 31 Until: 24:00,0, !- Field 33 For: WeekEnds Holidays AllOtherDays, !- Field 35 Until: 24:00,0; !- Field 36 Schedule:Compact, Hours_of_operation, !- Name On/Off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay WinterDesignDay, !- Field 2 Until: 07:00,0, !- Field 3 Until: 21:00,1, !- Field 5 Until: 24:00,0, !- Field 7 For: WeekEnds Holidays AllOtherDays, !- Field 9 Until: 24:00,0; !- Field 10 Schedule:Compact, HVACOperationSchd, !- Name On/Off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay WinterDesignDay, !- Field 2 Until: 07:00,0, !- Field 3 Until: 21:00,1, !- Field 5 Until: 24:00,0, !- Field 7 For: WeekEnds Holidays AllOtherDays, !- Field 9 Until: 24:00,0; !- Field 10 Schedule:Compact, HTGSETP_SCH_NO_OPTIMUM, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,15.6, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,21, !- Field 6 For: Weekdays, !- Field 8 Until: 06:00,15.6, !- Field 9 Until: 07:00,21, !- Field 11 Until: 08:00,21, !- Field 13 Until: 21:00,21, !- Field 15 Until: 24:00,15.6, !- Field 17 For: WeekEnds Holidays AllOtherDays, !- Field 19 Until: 24:00,15.6; !- Field 20 Schedule:Compact, HTGSETP_SCH_YES_OPTIMUM, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,15.6, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,21, !- Field 6 For: Weekdays, !- Field 8 Until: 06:00,15.6, !- Field 9 Until: 07:00,17.8, !- Field 11 Until: 08:00,20.0, !- Field 13 Until: 21:00,21, !- Field 15 Until: 24:00,15.6, !- Field 17 For: WeekEnds Holidays AllOtherDays, !- Field 19 Until: 24:00,15.6; !- Field 20 Schedule:Compact, HTGSETP_SCH_Yes_Optimum_w_SB, !-Name Temperature, !-Schedule Type Limits Name Through: 12/31, For: Weekdays, Until: 01:00, 15.6, Until: 02:00, 15.6, Until: 03:00, 15.6, Until: 04:00, 15.6, Until: 05:00, 15.6, Until: 06:00, 15.6, Until: 07:00, 17.8, Until: 08:00, 20, Until: 09:00, 21, Until: 10:00, 21, Until: 11:00, 21, Until: 12:00, 21, Until: 13:00, 20.4444444444444, Until: 14:00, 21, Until: 15:00, 20.4444444444444, Until: 16:00, 21, Until: 17:00, 21, Until: 18:00, 21, Until: 19:00, 21, Until: 20:00, 21, Until: 21:00, 21, Until: 22:00, 15.6, Until: 23:00, 15.6, Until: 24:00, 15.6, For: SummerDesignDay, Until: 24:00,15.6, For: WinterDesignDay, Until: 24:00,21, For: WeekEnds Holidays AllOtherDays, Until: 24:00,15.6; Schedule:Compact, HTGSETP_SCH_Yes_Optimum_Original, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,15.6, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,21, !- Field 6 For: Weekdays, !- Field 8 Until: 06:00,15.6, !- Field 9 Until: 07:00,17.8, !- Field 11 Until: 08:00,20.0, !- Field 13 Until: 21:00,21, !- Field 15 Until: 24:00,15.6, !- Field 17 For: WeekEnds Holidays AllOtherDays, !- Field 19 Until: 24:00,15.6; !- Field 20 Schedule:Compact, HTGSETP_SCH_Setback, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,15.6, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,21, !- Field 6 For: Weekdays, !- Field 8 Until: 09:00,15.6, !- Field 9 Until: 21:00,15.6, !- Field 11 Until: 24:00,15.6, !- Field 13 For: WeekEnds Holidays AllOtherDays, !- Field 15 Until: 24:00,15.6; !- Field 16 Schedule:Compact, HTGSETP_SCH_PSZ_AC_5_9, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,15.6, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,21, !- Field 6 For: Weekdays, !- Field 8 Until: 06:00,15.6, !- Field 9 Until: 07:00,21, !- Field 11 Until: 08:00,21, !- Field 13 Until: 21:00,21, !- Field 15 Until: 24:00,15.6, !- Field 17 For: WeekEnds Holidays AllOtherDays, !- Field 19 Until: 24:00,15.6; !- Field 20 Schedule:Compact, HTGSETP_SCH_PSZ_AC_4_8, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,15.6, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,21, !- Field 6 For: Weekdays, !- Field 8 Until: 06:00,15.6, !- Field 9 Until: 07:00,21, !- Field 11 Until: 08:00,21, !- Field 13 Until: 21:00,21, !- Field 15 Until: 24:00,15.6, !- Field 17 For: WeekEnds Holidays AllOtherDays, !- Field 19 Until: 24:00,15.6; !- Field 20 Schedule:Compact, HTGSETP_SCH_PSZ_AC_3_7, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,15.6, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,21, !- Field 6 For: Weekdays, !- Field 8 Until: 06:00,15.6, !- Field 9 Until: 07:00,21, !- Field 11 Until: 08:00,21, !- Field 13 Until: 21:00,21, !- Field 15 Until: 24:00,15.6, !- Field 17 For: WeekEnds Holidays AllOtherDays, !- Field 19 Until: 24:00,15.6; !- Field 20 Schedule:Compact, HTGSETP_SCH_PSZ_AC_2_6, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,15.6, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,21, !- Field 6 For: Weekdays, !- Field 8 Until: 06:00,15.6, !- Field 9 Until: 07:00,21, !- Field 11 Until: 08:00,21, !- Field 13 Until: 21:00,21, !- Field 15 Until: 24:00,15.6, !- Field 17 For: WeekEnds Holidays AllOtherDays, !- Field 19 Until: 24:00,15.6; !- Field 20 Schedule:Compact, HTGSETP_SCH_PSZ_AC_1_5, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,15.6, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,21, !- Field 6 For: Weekdays, !- Field 8 Until: 06:00,15.6, !- Field 9 Until: 07:00,21, !- Field 11 Until: 08:00,21, !- Field 13 Until: 21:00,21, !- Field 15 Until: 24:00,15.6, !- Field 17 For: WeekEnds Holidays AllOtherDays, !- Field 19 Until: 24:00,15.6; !- Field 20 Schedule:Compact, CLGSETP_SCH_NO_OPTIMUM, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,24, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,29.44, !- Field 6 For: Weekdays, !- Field 8 Until: 06:00,29.44, !- Field 9 Until: 07:00,24, !- Field 11 Until: 08:00,24, !- Field 13 Until: 21:00,24, !- Field 15 Until: 24:00,29.44, !- Field 17 For: WeekEnds Holidays AllOtherDays, !- Field 19 Until: 24:00,29.44; !- Field 20 Schedule:Compact, CLGSETP_SCH_YES_OPTIMUM, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,24, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,29.44, !- Field 6 For: Weekdays, !- Field 8 Until: 06:00,29.44, !- Field 9 Until: 07:00,27.8, !- Field 11 Until: 08:00,25.6, !- Field 13 Until: 21:00,24, !- Field 15 Until: 24:00,29.44, !- Field 17 For: WeekEnds Holidays AllOtherDays, !- Field 19 Until: 24:00,29.44; !- Field 20 Schedule:Compact, CLGSETP_SCH_Yes_Optimum_w_SB, !-Name Temperature, !-Schedule Type Limits Name Through: 12/31, For: Weekdays, Until: 01:00, 29.44, Until: 02:00, 29.44, Until: 03:00, 29.44, Until: 04:00, 29.44, Until: 05:00, 29.44, Until: 06:00, 29.44, Until: 07:00, 27.8, Until: 08:00, 25.6, Until: 09:00, 24, Until: 10:00, 24, Until: 11:00, 24, Until: 12:00, 24, Until: 13:00, 24.5555555555556, Until: 14:00, 24, Until: 15:00, 24.5555555555556, Until: 16:00, 24, Until: 17:00, 24, Until: 18:00, 24, Until: 19:00, 24, Until: 20:00, 24, Until: 21:00, 24, Until: 22:00, 29.44, Until: 23:00, 29.44, Until: 24:00, 29.44, For: SummerDesignDay, Until: 24:00,24, For: WinterDesignDay, Until: 24:00,29.44, For: WeekEnds Holidays AllOtherDays, Until: 24:00,29.44; Schedule:Compact, CLGSETP_SCH_Yes_Optimum_Original, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,24, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,29.44, !- Field 6 For: Weekdays, !- Field 8 Until: 06:00,29.44, !- Field 9 Until: 07:00,27.8, !- Field 11 Until: 08:00,25.6, !- Field 13 Until: 21:00,24, !- Field 15 Until: 24:00,29.44, !- Field 17 For: WeekEnds Holidays AllOtherDays, !- Field 19 Until: 24:00,29.44; !- Field 20 Schedule:Compact, CLGSETP_SCH_NO_SETBACK, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,24, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,29.44, !- Field 6 For: Weekdays, !- Field 8 Until: 06:00,24, !- Field 9 Until: 07:00,24, !- Field 11 Until: 08:00,24, !- Field 13 Until: 21:00,24, !- Field 15 Until: 24:00,24, !- Field 17 For: WeekEnds Holidays AllOtherDays, !- Field 19 Until: 24:00,24; !- Field 20 Schedule:Compact, CLGSETP_SCH_Setup, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,24, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,29.44, !- Field 6 For: Weekdays, !- Field 8 Until: 24:00,29.44, !- Field 9 For: WeekEnds Holidays AllOtherDays, !- Field 11 Until: 09:00,29.44, !- Field 12 Until: 19:00,29.44, !- Field 14 Until: 24:00,29.44; !- Field 16 Schedule:Compact, CLGSETP_SCH_PSZ_AC_5_9, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,24, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,29.44, !- Field 6 For: Weekdays, !- Field 8 Until: 06:00,29.44, !- Field 9 Until: 07:00,24, !- Field 11 Until: 08:00,24, !- Field 13 Until: 21:00,24, !- Field 15 Until: 24:00,29.44, !- Field 17 For: WeekEnds Holidays AllOtherDays, !- Field 19 Until: 24:00,29.44; !- Field 20 Schedule:Compact, CLGSETP_SCH_PSZ_AC_4_8, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,24, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,29.44, !- Field 6 For: Weekdays, !- Field 8 Until: 06:00,29.44, !- Field 9 Until: 07:00,24, !- Field 11 Until: 08:00,24, !- Field 13 Until: 21:00,24, !- Field 15 Until: 24:00,29.44, !- Field 17 For: WeekEnds Holidays AllOtherDays, !- Field 19 Until: 24:00,29.44; !- Field 20 Schedule:Compact, CLGSETP_SCH_PSZ_AC_3_7, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,24, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,29.44, !- Field 6 For: Weekdays, !- Field 8 Until: 06:00,29.44, !- Field 9 Until: 07:00,24, !- Field 11 Until: 08:00,24, !- Field 13 Until: 21:00,24, !- Field 15 Until: 24:00,29.44, !- Field 17 For: WeekEnds Holidays AllOtherDays, !- Field 19 Until: 24:00,29.44; !- Field 20 Schedule:Compact, CLGSETP_SCH_PSZ_AC_2_6, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,24, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,29.44, !- Field 6 For: Weekdays, !- Field 8 Until: 06:00,29.44, !- Field 9 Until: 07:00,24, !- Field 11 Until: 08:00,24, !- Field 13 Until: 21:00,24, !- Field 15 Until: 24:00,29.44, !- Field 17 For: WeekEnds Holidays AllOtherDays, !- Field 19 Until: 24:00,29.44; !- Field 20 Schedule:Compact, CLGSETP_SCH_PSZ_AC_1_5, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 24:00,24, !- Field 3 For: WinterDesignDay, !- Field 5 Until: 24:00,29.44, !- Field 6 For: Weekdays, !- Field 8 Until: 06:00,29.44, !- Field 9 Until: 07:00,24, !- Field 11 Until: 08:00,24, !- Field 13 Until: 21:00,24, !- Field 15 Until: 24:00,29.44, !- Field 17 For: WeekEnds Holidays AllOtherDays, !- Field 19 Until: 24:00,29.44; !- Field 20 Schedule:Compact, MinOA_Sched, !- Name On/Off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 24:00,1, !- Field 3 For: WeekEnds WinterDesignDay Holidays AllOtherDays, !- Field 5 Until: 24:00,1; !- Field 6 Schedule:Compact, MinOA_MotorizedDamper_Sched, !- Name On/Off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay WinterDesignDay, !- Field 2 Until: 08:00,0, !- Field 3 Until: 21:00,1, !- Field 5 Until: 24:00,0, !- Field 7 For: WeekEnds Holidays AllOtherDays, !- Field 9 Until: 24:00,0; !- Field 10 Schedule:Compact, ACTIVITY_SCH, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,120; !- Field 3 Schedule:Compact, Bathrooms_ZN_1_FLR_1 SHW_default Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, Bathrooms_ZN_1_FLR_1 SHW_default Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, Bathrooms_ZN_1_FLR_1 SHW_default Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60; !- Field 3 Schedule:Compact, Bathrooms_ZN_1_FLR_1 SHW_default Hot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, Bathrooms_ZN_1_FLR_2 SHW_default Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, Bathrooms_ZN_1_FLR_2 SHW_default Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, Bathrooms_ZN_1_FLR_2 SHW_default Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60; !- Field 3 Schedule:Compact, Bathrooms_ZN_1_FLR_2 SHW_default Hot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, Kitchen_ZN_1_FLR_1 SHW_default Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, Kitchen_ZN_1_FLR_1 SHW_default Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, Kitchen_ZN_1_FLR_1 SHW_default Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60; !- Field 3 Schedule:Compact, Kitchen_ZN_1_FLR_1 SHW_default Hot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,55; !- Field 3 Schedule:Compact, Kitchen_ZN_1_FLR_1_Case:1_WALKINFREEZER_CaseDefrost2aDaySched, !- Name ON/OFF, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For:AllDays, !- Field 2 Interpolate:Average, !- Field 3 Until: 11:00,0, !- Field 4 Until: 11:20,1, !- Field 6 Until: 23:00,0, !- Field 8 Until: 23:20,1, !- Field 10 Until: 24:00,0; !- Field 12 Schedule:Compact, Kitchen_ZN_1_FLR_1_Case:1_WALKINFREEZER_CaseDripDown2aDaySched, !- Name ON/OFF, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For:AllDays, !- Field 2 Interpolate:Average, !- Field 3 Until: 11:00,0, !- Field 4 Until: 11:30,1, !- Field 6 Until: 23:00,0, !- Field 8 Until: 23:30,1, !- Field 10 Until: 24:00,0; !- Field 12 Schedule:Compact, Kitchen_ZN_1_FLR_1_Case:1_WALKINFREEZER_WalkInStockingSched, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Tuesday Friday, !- Field 2 Until: 4:00,0.0, !- Field 3 Until: 5:00,725.0, !- Field 5 Until: 6:00,417.0, !- Field 7 Until: 7:00,290.0, !- Field 9 Until: 24:00,0.0, !- Field 11 For: AllOtherDays, !- Field 13 Until: 4:00,0.0, !- Field 14 Until: 5:00,125.0, !- Field 16 Until: 6:00,117.0, !- Field 18 Until: 7:00,90.0, !- Field 20 Until: 19:00,0.0, !- Field 22 Until: 20:00,125.0, !- Field 24 Until: 21:00,117.0, !- Field 26 Until: 22:00,90.0, !- Field 28 Until: 24:00,0.0; !- Field 30 Schedule:Compact, Kitchen_ZN_1_FLR_1_Case:1_WALKINFREEZER_CaseCreditReduxSched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For:AllDays, !- Field 2 Interpolate:No, !- Field 3 Until: 7:00,0.2, !- Field 4 Until: 21:00,0.4, !- Field 6 Until: 24:00,0.2; !- Field 8 Schedule:Compact, Kitchen_ZN_1_FLR_1_Case:2_SELFCONTAINEDDISPLAYCASE_CaseStockingSched, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For:AllDays, !- Field 2 Until: 6:00,0.0, !- Field 3 Until: 7:00,50.0, !- Field 5 Until: 9:00,70.0, !- Field 7 Until: 10:00,80.0, !- Field 9 Until: 11:00,70.0, !- Field 11 Until: 13:00,50.0, !- Field 13 Until: 14:00,80.0, !- Field 15 Until: 15:00,90.0, !- Field 17 Until: 16:00,80.0, !- Field 19 Until: 24:00,0.0; !- Field 21 Schedule:Compact, SHWSys1-Loop-Temp-Schedule, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, SHWSys1 Water Heater Setpoint Temperature Schedule Name, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, SHWSys1 Water Heater Ambient Temperature Schedule Name, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,22.0; !- Field 3 Schedule:Compact, walkin_occ_lght_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 6/30, !- Field 1 For: Weekdays, !- Field 2 Until: 7:00,0.1773, !- Field 3 Until: 21:00,0.468, !- Field 5 Until: 24:00,0.1773, !- Field 7 For: SummerDesignDay, !- Field 9 Until: 24:00,1, !- Field 10 For: WinterDesignDay, !- Field 12 Until: 24:00,0, !- Field 13 For: WeekEnds Holidays AllOtherDays, !- Field 15 Until: 24:00,0.1773, !- Field 16 Through: 9/1, !- Field 18 For: Weekdays, !- Field 19 Until: 8:00,0.1773, !- Field 20 Until: 20:00,0.26, !- Field 22 Until: 24:00,0.1773, !- Field 24 For: SummerDesignDay, !- Field 26 Until: 24:00,1, !- Field 27 For: WinterDesignDay, !- Field 29 Until: 24:00,0, !- Field 30 For: WeekEnds Holidays AllOtherDays, !- Field 32 Until: 24:00,0.1773, !- Field 33 Through: 12/31, !- Field 35 For: Weekdays, !- Field 36 Until: 7:00,0.1773, !- Field 37 Until: 21:00,0.468, !- Field 39 Until: 24:00,0.1773, !- Field 41 For: SummerDesignDay, !- Field 43 Until: 24:00,1, !- Field 44 For: WinterDesignDay, !- Field 46 Until: 24:00,0, !- Field 47 For: WeekEnds Holidays AllOtherDays, !- Field 49 Until: 24:00,0.1773; !- Field 50 Schedule:Compact, Offices_ZN_1_FLR_1_MDP_Sch, !-Name Fraction, !-Schedule Type Limits Name Through: 6/30, For: Weekdays, Until: 01:00, 0.2, Until: 02:00, 0.2, Until: 03:00, 0.2, Until: 04:00, 0.2, Until: 05:00, 0.2, Until: 06:00, 0.2, Until: 07:00, 0.2, Until: 08:00, 0.2, Until: 09:00, 0.2, Until: 10:00, 0.2, Until: 11:00, 0.2, Until: 12:00, 0.2, Until: 13:00, 0, Until: 14:00, 0.2, Until: 15:00, 0, Until: 16:00, 0.2, Until: 17:00, 0.2, Until: 18:00, 0.2, Until: 19:00, 0.2, Until: 20:00, 0.2, Until: 21:00, 0.2, Until: 22:00, 0.2, Until: 23:00, 0.2, Until: 24:00, 0.2, For: AllOtherDays, Until: 24:00, 0.2, Through: 9/1, For: Weekdays, Until: 01:00, 0.2, Until: 02:00, 0.2, Until: 03:00, 0.2, Until: 04:00, 0.2, Until: 05:00, 0.2, Until: 06:00, 0.2, Until: 07:00, 0.2, Until: 08:00, 0.2, Until: 09:00, 0.2, Until: 10:00, 0.2, Until: 11:00, 0.2, Until: 12:00, 0, Until: 13:00, 0.2, Until: 14:00, 0.2, Until: 15:00, 0, Until: 16:00, 0.2, Until: 17:00, 0.2, Until: 18:00, 0.2, Until: 19:00, 0.2, Until: 20:00, 0.2, Until: 21:00, 0.2, Until: 22:00, 0.2, Until: 23:00, 0.2, Until: 24:00, 0.2, For: AllOtherDays, Until: 24:00, 0.2, Through: 12/31, For: Weekdays, Until: 01:00, 0.2, Until: 02:00, 0.2, Until: 03:00, 0.2, Until: 04:00, 0.2, Until: 05:00, 0.2, Until: 06:00, 0.2, Until: 07:00, 0.2, Until: 08:00, 0.2, Until: 09:00, 0.2, Until: 10:00, 0.2, Until: 11:00, 0.2, Until: 12:00, 0.2, Until: 13:00, 0, Until: 14:00, 0.2, Until: 15:00, 0, Until: 16:00, 0.2, Until: 17:00, 0.2, Until: 18:00, 0.2, Until: 19:00, 0.2, Until: 20:00, 0.2, Until: 21:00, 0.2, Until: 22:00, 0.2, Until: 23:00, 0.2, Until: 24:00, 0.2, For: AllOtherDays, Until: 24:00, 0.2; Schedule:Compact, Offices_ZN_1_FLR_2_MDP_Sch, !-Name Fraction, !-Schedule Type Limits Name Through: 6/30, For: Weekdays, Until: 01:00, 0.2, Until: 02:00, 0.2, Until: 03:00, 0.2, Until: 04:00, 0.2, Until: 05:00, 0.2, Until: 06:00, 0.2, Until: 07:00, 0.2, Until: 08:00, 0.2, Until: 09:00, 0.2, Until: 10:00, 0.2, Until: 11:00, 0.2, Until: 12:00, 0.2, Until: 13:00, 0, Until: 14:00, 0.2, Until: 15:00, 0, Until: 16:00, 0.2, Until: 17:00, 0.2, Until: 18:00, 0.2, Until: 19:00, 0.2, Until: 20:00, 0.2, Until: 21:00, 0.2, Until: 22:00, 0.2, Until: 23:00, 0.2, Until: 24:00, 0.2, For: AllOtherDays, Until: 24:00, 0.2, Through: 9/1, For: Weekdays, Until: 01:00, 0.2, Until: 02:00, 0.2, Until: 03:00, 0.2, Until: 04:00, 0.2, Until: 05:00, 0.2, Until: 06:00, 0.2, Until: 07:00, 0.2, Until: 08:00, 0.2, Until: 09:00, 0.2, Until: 10:00, 0.2, Until: 11:00, 0.2, Until: 12:00, 0, Until: 13:00, 0.2, Until: 14:00, 0.2, Until: 15:00, 0, Until: 16:00, 0.2, Until: 17:00, 0.2, Until: 18:00, 0.2, Until: 19:00, 0.2, Until: 20:00, 0.2, Until: 21:00, 0.2, Until: 22:00, 0.2, Until: 23:00, 0.2, Until: 24:00, 0.2, For: AllOtherDays, Until: 24:00, 0.2, Through: 12/31, For: Weekdays, Until: 01:00, 0.2, Until: 02:00, 0.2, Until: 03:00, 0.2, Until: 04:00, 0.2, Until: 05:00, 0.2, Until: 06:00, 0.2, Until: 07:00, 0.2, Until: 08:00, 0.2, Until: 09:00, 0.2, Until: 10:00, 0.2, Until: 11:00, 0.2, Until: 12:00, 0.2, Until: 13:00, 0, Until: 14:00, 0.2, Until: 15:00, 0, Until: 16:00, 0.2, Until: 17:00, 0.2, Until: 18:00, 0.2, Until: 19:00, 0.2, Until: 20:00, 0.2, Until: 21:00, 0.2, Until: 22:00, 0.2, Until: 23:00, 0.2, Until: 24:00, 0.2, For: AllOtherDays, Until: 24:00, 0.2; Schedule:Constant, VAV_POD_1 Max OA Fraction, !- Name , !- Schedule Type Limits Name 1.0; !- Hourly Value Schedule:Constant, VAV_POD_2 Max OA Fraction, !- Name , !- Schedule Type Limits Name 1.0; !- Hourly Value Schedule:Constant, VAV_POD_3 Max OA Fraction, !- Name , !- Schedule Type Limits Name 1.0; !- Hourly Value Schedule:Constant, VAV_OTHER Max OA Fraction, !- Name , !- Schedule Type Limits Name 1.0; !- Hourly Value !- =========== ALL OBJECTS IN CLASS: GLOBALGEOMETRYRULES =========== GlobalGeometryRules, UpperLeftCorner, !- Starting Vertex Position Counterclockwise, !- Vertex Entry Direction Relative, !- Coordinate System Relative; !- Daylighting Reference Point Coordinate System Construction:FfactorGroundFloor, Corner_Class_1_Pod_1_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 99.0, !- Area 20.0; !- PerimeterExposed Construction:FfactorGroundFloor, Mult_Class_1_Pod_1_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 477.0, !- Area 53.0; !- PerimeterExposed Construction:FfactorGroundFloor, Corridor_Pod_1_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 320.0, !- Area 5.0; !- PerimeterExposed Construction:FfactorGroundFloor, Corner_Class_2_Pod_1_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 99.0, !- Area 20.0; !- PerimeterExposed Construction:FfactorGroundFloor, Mult_Class_2_Pod_1_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 477.0, !- Area 53.0; !- PerimeterExposed Construction:FfactorGroundFloor, Corner_Class_1_Pod_2_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 99.0, !- Area 20.0; !- PerimeterExposed Construction:FfactorGroundFloor, Mult_Class_1_Pod_2_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 477.0, !- Area 53.0; !- PerimeterExposed Construction:FfactorGroundFloor, Corridor_Pod_2_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 320.0, !- Area 5.0; !- PerimeterExposed Construction:FfactorGroundFloor, Corner_Class_2_Pod_2_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 99.0, !- Area 20.0; !- PerimeterExposed Construction:FfactorGroundFloor, Mult_Class_2_Pod_2_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 477.0, !- Area 53.0; !- PerimeterExposed Construction:FfactorGroundFloor, Corner_Class_1_Pod_3_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 99.0, !- Area 20.0; !- PerimeterExposed Construction:FfactorGroundFloor, Mult_Class_1_Pod_3_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 477.0, !- Area 53.0; !- PerimeterExposed Construction:FfactorGroundFloor, Corridor_Pod_3_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 320.0, !- Area 5.0; !- PerimeterExposed Construction:FfactorGroundFloor, Corner_Class_2_Pod_3_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 99.0, !- Area 20.0; !- PerimeterExposed Construction:FfactorGroundFloor, Mult_Class_2_Pod_3_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 477.0, !- Area 53.0; !- PerimeterExposed Construction:FfactorGroundFloor, Main_Corridor_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 1140.0, !- Area 35.0; !- PerimeterExposed Construction:FfactorGroundFloor, Lobby_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 210.0, !- Area 15.0; !- PerimeterExposed Construction:FfactorGroundFloor, Bathrooms_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 210.0, !- Area 18.0; !- PerimeterExposed Construction:FfactorGroundFloor, Offices_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 532.0, !- Area 52.0; !- PerimeterExposed Construction:FfactorGroundFloor, Gym_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 1976.0, !- Area 0.0; !- PerimeterExposed Construction:FfactorGroundFloor, Aux_Gym_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 1248.0, !- Area 76.0; !- PerimeterExposed Construction:FfactorGroundFloor, Auditorium_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 988.0, !- Area 38.0; !- PerimeterExposed Construction:FfactorGroundFloor, Kitchen_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 216.0, !- Area 9.0; !- PerimeterExposed Construction:FfactorGroundFloor, Cafeteria_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 624.0, !- Area 50.0; !- PerimeterExposed Construction:FfactorGroundFloor, Mech_ZN_1_FLR_1_Floor_Ffactor, !- Name 0.88281, !- F-Factor 342.0, !- Area 0; !- PerimeterExposed !- =========== ALL OBJECTS IN CLASS: ZONE =========== Zone, Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 396.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 4.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 396.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Name 0.0000, !- Direction of Relative North {deg} 11.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 1908.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Name 0.0000, !- Direction of Relative North {deg} 11.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 4.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 1908.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Corridor_Pod_1_ZN_1_FLR_1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 9.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 1280.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Corridor_Pod_1_ZN_1_FLR_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 9.0000, !- Y Origin {m} 4.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 1280.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 14.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 396.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 14.0000, !- Y Origin {m} 4.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 396.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Name 0.0000, !- Direction of Relative North {deg} 11.0000, !- X Origin {m} 14.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 1908.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Name 0.0000, !- Direction of Relative North {deg} 11.0000, !- X Origin {m} 14.0000, !- Y Origin {m} 4.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 1908.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 40.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 396.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 40.0000, !- Y Origin {m} 4.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 396.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Name 0.0000, !- Direction of Relative North {deg} 11.0000, !- X Origin {m} 40.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 1908.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Name 0.0000, !- Direction of Relative North {deg} 11.0000, !- X Origin {m} 40.0000, !- Y Origin {m} 4.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 1908.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Corridor_Pod_2_ZN_1_FLR_1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 49.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 1280.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Corridor_Pod_2_ZN_1_FLR_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 49.0000, !- Y Origin {m} 4.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 1280.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 54.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 396.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 54.0000, !- Y Origin {m} 4.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 396.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Name 0.0000, !- Direction of Relative North {deg} 11.0000, !- X Origin {m} 54.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 1908.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Name 0.0000, !- Direction of Relative North {deg} 11.0000, !- X Origin {m} 54.0000, !- Y Origin {m} 4.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 1908.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 81.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 396.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 81.0000, !- Y Origin {m} 4.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 396.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Name 0.0000, !- Direction of Relative North {deg} 11.0000, !- X Origin {m} 81.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 1908.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Name 0.0000, !- Direction of Relative North {deg} 11.0000, !- X Origin {m} 81.0000, !- Y Origin {m} 4.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 1908.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Corridor_Pod_3_ZN_1_FLR_1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 90.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 1280.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Corridor_Pod_3_ZN_1_FLR_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 90.0000, !- Y Origin {m} 4.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 1280.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 95.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 396.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 95.0000, !- Y Origin {m} 4.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 396.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Name 0.0000, !- Direction of Relative North {deg} 11.0000, !- X Origin {m} 95.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 1908.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Name 0.0000, !- Direction of Relative North {deg} 11.0000, !- X Origin {m} 95.0000, !- Y Origin {m} 4.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 1908.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Main_Corridor_ZN_1_FLR_1,!- Name 0.0000, !- Direction of Relative North {deg} 64.0000, !- X Origin {m} 14.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 4560.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Main_Corridor_ZN_1_FLR_2,!- Name 0.0000, !- Direction of Relative North {deg} 64.0000, !- X Origin {m} 14.0000, !- Y Origin {m} 4.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 4560.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Lobby_ZN_1_FLR_1, !- Name 0.0000, !- Direction of Relative North {deg} 64.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 840.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Lobby_ZN_1_FLR_2, !- Name 0.0000, !- Direction of Relative North {deg} 64.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 4.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 840.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Bathrooms_ZN_1_FLR_1, !- Name 0.0000, !- Direction of Relative North {deg} 64.0000, !- X Origin {m} 90.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 840.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Bathrooms_ZN_1_FLR_2, !- Name 0.0000, !- Direction of Relative North {deg} 64.0000, !- X Origin {m} 90.0000, !- Y Origin {m} 4.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 840.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Offices_ZN_1_FLR_1, !- Name 0.0000, !- Direction of Relative North {deg} 79.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 2128.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Offices_ZN_1_FLR_2, !- Name 0.0000, !- Direction of Relative North {deg} 79.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 4.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 2128.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Gym_ZN_1_FLR_1, !- Name 0.0000, !- Direction of Relative North {deg} 79.0000, !- X Origin {m} 14.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 15808.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Aux_Gym_ZN_1_FLR_1, !- Name 0.0000, !- Direction of Relative North {deg} 117.0000, !- X Origin {m} 14.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 9984.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Auditorium_ZN_1_FLR_1, !- Name 0.0000, !- Direction of Relative North {deg} 79.0000, !- X Origin {m} 75.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 7904.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Kitchen_ZN_1_FLR_1, !- Name 0.0000, !- Direction of Relative North {deg} 117.0000, !- X Origin {m} 66.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 864.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Name 0.0000, !- Direction of Relative North {deg} 117.0000, !- X Origin {m} 66.0000, !- Y Origin {m} 4.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 3360.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Cafeteria_ZN_1_FLR_1, !- Name 0.0000, !- Direction of Relative North {deg} 117.0000, !- X Origin {m} 75.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 2496.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Mech_ZN_1_FLR_1, !- Name 0.0000, !- Direction of Relative North {deg} 79.0000, !- X Origin {m} 66.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 1368.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Mech_ZN_1_FLR_2, !- Name 0.0000, !- Direction of Relative North {deg} 79.0000, !- X Origin {m} 66.0000, !- Y Origin {m} 4.0000, !- Z Origin {m} 1, !- Type 1.0000, !- Multiplier 4.0000, !- Ceiling Height {m} 1368.0000, !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area !- =========== ALL OBJECTS IN CLASS: BUILDINGSURFACE:DETAILED =========== BuildingSurface:Detailed, Corner_Class_1_Pod_1_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_1_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_1_Pod_1_ZN_1_FLR_1_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_1_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_1_ZN_1_FLR_1_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_1_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_1_ZN_1_FLR_1_Floor, !- Name Floor, !- Surface Type Corner_Class_1_Pod_1_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_1_ZN_1_FLR_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_1_Pod_1_ZN_1_FLR_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_1_ZN_1_FLR_2_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_1_ZN_1_FLR_2_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_1_Pod_1_ZN_1_FLR_2_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_1_ZN_1_FLR_2_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_1_ZN_1_FLR_2_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_1_ZN_1_FLR_2_Wall_4, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_1_ZN_1_FLR_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_1_Pod_1_ZN_1_FLR_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_1_ZN_1_FLR_2_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_1_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 53.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_1_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Lobby_ZN_1_FLR_1_Wall_5, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 53.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 53.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_1_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_1_ZN_1_FLR_1_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 53.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_1_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_1_Pod_1_ZN_1_FLR_1_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_1_ZN_1_FLR_1_Floor, !- Name Floor, !- Surface Type Mult_Class_1_Pod_1_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_1_ZN_1_FLR_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_1_Pod_1_ZN_1_FLR_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_1_ZN_1_FLR_2_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 53.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_1_ZN_1_FLR_2_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Lobby_ZN_1_FLR_2_Wall_5, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 53.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 53.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_1_ZN_1_FLR_2_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_1_ZN_1_FLR_2_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 53.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_1_ZN_1_FLR_2_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_1_Pod_1_ZN_1_FLR_2_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_1_ZN_1_FLR_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_1_Pod_1_ZN_1_FLR_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_1_ZN_1_FLR_2_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_1_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_1_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_1_Pod_1_ZN_1_FLR_1_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_1_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_1_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_1_Pod_1_ZN_1_FLR_1_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_1_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_1_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Lobby_ZN_1_FLR_1_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 64.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_1_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_1_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_2_Pod_1_ZN_1_FLR_1_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 64.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_1_ZN_1_FLR_1_Wall_5, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_1_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_2_Pod_1_ZN_1_FLR_1_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_1_ZN_1_FLR_1_Wall_6, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corridor_Pod_1_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_1_ZN_1_FLR_1_Floor, !- Name Floor, !- Surface Type Corridor_Pod_1_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Corridor_Pod_1_ZN_1_FLR_1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 64.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_1_ZN_1_FLR_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Corridor_Pod_1_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_1_ZN_1_FLR_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 64.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_1_ZN_1_FLR_2_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_1_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_1_Pod_1_ZN_1_FLR_2_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_1_ZN_1_FLR_2_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_1_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_1_Pod_1_ZN_1_FLR_2_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_1_ZN_1_FLR_2_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_1_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Lobby_ZN_1_FLR_2_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 64.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_1_ZN_1_FLR_2_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_1_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_2_Pod_1_ZN_1_FLR_2_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 64.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_1_ZN_1_FLR_2_Wall_5, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_1_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_2_Pod_1_ZN_1_FLR_2_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_1_ZN_1_FLR_2_Wall_6, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corridor_Pod_1_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_1_ZN_1_FLR_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Corridor_Pod_1_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_1_ZN_1_FLR_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 64.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_1_ZN_1_FLR_2_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Corridor_Pod_1_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 64.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_1_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_1_ZN_1_FLR_1_Wall_5, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_1_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_2_Pod_1_ZN_1_FLR_1_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_1_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_1_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_1_ZN_1_FLR_1_Floor, !- Name Floor, !- Surface Type Corner_Class_2_Pod_1_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_1_ZN_1_FLR_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_2_Pod_1_ZN_1_FLR_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_1_ZN_1_FLR_2_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_1_ZN_1_FLR_2_Wall_5, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_1_ZN_1_FLR_2_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_2_Pod_1_ZN_1_FLR_2_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_1_ZN_1_FLR_2_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_1_ZN_1_FLR_2_Wall_4, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_1_ZN_1_FLR_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_2_Pod_1_ZN_1_FLR_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_1_ZN_1_FLR_2_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_1_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_1_ZN_1_FLR_1_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 53.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_1_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Main_Corridor_ZN_1_FLR_1_Wall_12, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 53.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 53.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_1_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 53.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_1_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_2_Pod_1_ZN_1_FLR_1_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_1_ZN_1_FLR_1_Floor, !- Name Floor, !- Surface Type Mult_Class_2_Pod_1_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_1_ZN_1_FLR_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_2_Pod_1_ZN_1_FLR_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_1_ZN_1_FLR_2_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_1_ZN_1_FLR_2_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 53.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_1_ZN_1_FLR_2_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Main_Corridor_ZN_1_FLR_2_Wall_12, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 53.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 53.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_1_ZN_1_FLR_2_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 53.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_1_ZN_1_FLR_2_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_2_Pod_1_ZN_1_FLR_2_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_1_ZN_1_FLR_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_2_Pod_1_ZN_1_FLR_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_1_ZN_1_FLR_2_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_2_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_2_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_1_Pod_2_ZN_1_FLR_1_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_2_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_2_ZN_1_FLR_1_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_2_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_2_ZN_1_FLR_1_Floor, !- Name Floor, !- Surface Type Corner_Class_1_Pod_2_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_2_ZN_1_FLR_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_1_Pod_2_ZN_1_FLR_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_2_ZN_1_FLR_2_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_2_ZN_1_FLR_2_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_1_Pod_2_ZN_1_FLR_2_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_2_ZN_1_FLR_2_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_2_ZN_1_FLR_2_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_2_ZN_1_FLR_2_Wall_4, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_2_ZN_1_FLR_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_1_Pod_2_ZN_1_FLR_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_2_ZN_1_FLR_2_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_2_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 53.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_2_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Main_Corridor_ZN_1_FLR_1_Wall_10, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 53.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 53.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_2_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_2_ZN_1_FLR_1_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 53.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_2_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_1_Pod_2_ZN_1_FLR_1_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_2_ZN_1_FLR_1_Floor, !- Name Floor, !- Surface Type Mult_Class_1_Pod_2_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_2_ZN_1_FLR_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_1_Pod_2_ZN_1_FLR_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_2_ZN_1_FLR_2_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 53.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_2_ZN_1_FLR_2_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Main_Corridor_ZN_1_FLR_2_Wall_10, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 53.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 53.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_2_ZN_1_FLR_2_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_2_ZN_1_FLR_2_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 53.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_2_ZN_1_FLR_2_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_1_Pod_2_ZN_1_FLR_2_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_2_ZN_1_FLR_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_1_Pod_2_ZN_1_FLR_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_2_ZN_1_FLR_2_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_2_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_2_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_1_Pod_2_ZN_1_FLR_1_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_2_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_2_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_1_Pod_2_ZN_1_FLR_1_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_2_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_2_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Main_Corridor_ZN_1_FLR_1_Wall_9, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 64.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_2_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_2_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_2_Pod_2_ZN_1_FLR_1_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 64.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_2_ZN_1_FLR_1_Wall_5, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_2_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_2_Pod_2_ZN_1_FLR_1_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_2_ZN_1_FLR_1_Wall_6, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corridor_Pod_2_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_2_ZN_1_FLR_1_Floor, !- Name Floor, !- Surface Type Corridor_Pod_2_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Corridor_Pod_2_ZN_1_FLR_1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 64.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_2_ZN_1_FLR_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Corridor_Pod_2_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_2_ZN_1_FLR_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 64.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_2_ZN_1_FLR_2_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_2_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_1_Pod_2_ZN_1_FLR_2_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_2_ZN_1_FLR_2_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_2_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_1_Pod_2_ZN_1_FLR_2_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_2_ZN_1_FLR_2_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_2_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Main_Corridor_ZN_1_FLR_2_Wall_9, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 64.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_2_ZN_1_FLR_2_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_2_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_2_Pod_2_ZN_1_FLR_2_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 64.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_2_ZN_1_FLR_2_Wall_5, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_2_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_2_Pod_2_ZN_1_FLR_2_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_2_ZN_1_FLR_2_Wall_6, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corridor_Pod_2_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_2_ZN_1_FLR_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Corridor_Pod_2_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_2_ZN_1_FLR_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 64.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_2_ZN_1_FLR_2_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Corridor_Pod_2_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 64.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_2_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_2_ZN_1_FLR_1_Wall_5, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_2_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_2_Pod_2_ZN_1_FLR_1_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_2_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_2_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_2_ZN_1_FLR_1_Floor, !- Name Floor, !- Surface Type Corner_Class_2_Pod_2_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_2_ZN_1_FLR_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_2_Pod_2_ZN_1_FLR_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_2_ZN_1_FLR_2_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_2_ZN_1_FLR_2_Wall_5, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_2_ZN_1_FLR_2_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_2_Pod_2_ZN_1_FLR_2_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_2_ZN_1_FLR_2_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_2_ZN_1_FLR_2_Wall_4, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_2_ZN_1_FLR_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_2_Pod_2_ZN_1_FLR_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_2_ZN_1_FLR_2_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_2_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_2_ZN_1_FLR_1_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 53.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_2_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Main_Corridor_ZN_1_FLR_1_Wall_8, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 53.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 53.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_2_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 53.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_2_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_2_Pod_2_ZN_1_FLR_1_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_2_ZN_1_FLR_1_Floor, !- Name Floor, !- Surface Type Mult_Class_2_Pod_2_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_2_ZN_1_FLR_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_2_Pod_2_ZN_1_FLR_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_2_ZN_1_FLR_2_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_2_ZN_1_FLR_2_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 53.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_2_ZN_1_FLR_2_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Main_Corridor_ZN_1_FLR_2_Wall_8, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 53.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 53.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_2_ZN_1_FLR_2_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 53.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_2_ZN_1_FLR_2_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_2_Pod_2_ZN_1_FLR_2_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_2_ZN_1_FLR_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_2_Pod_2_ZN_1_FLR_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_2_ZN_1_FLR_2_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_3_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_3_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_1_Pod_3_ZN_1_FLR_1_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_3_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_3_ZN_1_FLR_1_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_3_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_3_ZN_1_FLR_1_Floor, !- Name Floor, !- Surface Type Corner_Class_1_Pod_3_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_3_ZN_1_FLR_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_1_Pod_3_ZN_1_FLR_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_3_ZN_1_FLR_2_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_3_ZN_1_FLR_2_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_1_Pod_3_ZN_1_FLR_2_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_3_ZN_1_FLR_2_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_3_ZN_1_FLR_2_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_3_ZN_1_FLR_2_Wall_4, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_3_ZN_1_FLR_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_1_Pod_3_ZN_1_FLR_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_1_Pod_3_ZN_1_FLR_2_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_3_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 53.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_3_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Main_Corridor_ZN_1_FLR_1_Wall_6, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 53.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 53.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_3_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_3_ZN_1_FLR_1_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 53.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_3_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_1_Pod_3_ZN_1_FLR_1_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_3_ZN_1_FLR_1_Floor, !- Name Floor, !- Surface Type Mult_Class_1_Pod_3_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_3_ZN_1_FLR_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_1_Pod_3_ZN_1_FLR_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_3_ZN_1_FLR_2_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 53.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_3_ZN_1_FLR_2_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Main_Corridor_ZN_1_FLR_2_Wall_6, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 53.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 53.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_3_ZN_1_FLR_2_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_3_ZN_1_FLR_2_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 53.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_3_ZN_1_FLR_2_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_1_Pod_3_ZN_1_FLR_2_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_3_ZN_1_FLR_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_1_Pod_3_ZN_1_FLR_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_1_Pod_3_ZN_1_FLR_2_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_3_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_3_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_1_Pod_3_ZN_1_FLR_1_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_3_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_3_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_1_Pod_3_ZN_1_FLR_1_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_3_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_3_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Bathrooms_ZN_1_FLR_1_Wall_6, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 64.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_3_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_3_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_2_Pod_3_ZN_1_FLR_1_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 64.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_3_ZN_1_FLR_1_Wall_5, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_3_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_2_Pod_3_ZN_1_FLR_1_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_3_ZN_1_FLR_1_Wall_6, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corridor_Pod_3_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_3_ZN_1_FLR_1_Floor, !- Name Floor, !- Surface Type Corridor_Pod_3_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Corridor_Pod_3_ZN_1_FLR_1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 64.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_3_ZN_1_FLR_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Corridor_Pod_3_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_3_ZN_1_FLR_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 64.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_3_ZN_1_FLR_2_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_3_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_1_Pod_3_ZN_1_FLR_2_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_3_ZN_1_FLR_2_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_3_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_1_Pod_3_ZN_1_FLR_2_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_3_ZN_1_FLR_2_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_3_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Bathrooms_ZN_1_FLR_2_Wall_6, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 64.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 64.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_3_ZN_1_FLR_2_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_3_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_2_Pod_3_ZN_1_FLR_2_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 64.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 64.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_3_ZN_1_FLR_2_Wall_5, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corridor_Pod_3_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_2_Pod_3_ZN_1_FLR_2_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_3_ZN_1_FLR_2_Wall_6, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corridor_Pod_3_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_3_ZN_1_FLR_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Corridor_Pod_3_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_3_ZN_1_FLR_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 64.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corridor_Pod_3_ZN_1_FLR_2_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Corridor_Pod_3_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 64.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 64.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_3_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_3_ZN_1_FLR_1_Wall_5, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_3_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_2_Pod_3_ZN_1_FLR_1_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_3_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_3_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_3_ZN_1_FLR_1_Floor, !- Name Floor, !- Surface Type Corner_Class_2_Pod_3_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_3_ZN_1_FLR_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_2_Pod_3_ZN_1_FLR_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_3_ZN_1_FLR_2_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_3_ZN_1_FLR_2_Wall_5, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_3_ZN_1_FLR_2_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_2_Pod_3_ZN_1_FLR_2_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 11.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_3_ZN_1_FLR_2_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 11.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_3_ZN_1_FLR_2_Wall_4, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_3_ZN_1_FLR_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_2_Pod_3_ZN_1_FLR_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Corner_Class_2_Pod_3_ZN_1_FLR_2_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 11.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 11.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_3_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_3_ZN_1_FLR_1_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 53.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_3_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Bathrooms_ZN_1_FLR_1_Wall_5, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 53.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 53.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_3_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 53.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_3_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_2_Pod_3_ZN_1_FLR_1_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_3_ZN_1_FLR_1_Floor, !- Name Floor, !- Surface Type Mult_Class_2_Pod_3_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_3_ZN_1_FLR_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_2_Pod_3_ZN_1_FLR_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_3_ZN_1_FLR_2_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_3_ZN_1_FLR_2_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 53.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_3_ZN_1_FLR_2_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Bathrooms_ZN_1_FLR_2_Wall_5, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 53.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 53.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_3_ZN_1_FLR_2_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 53.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_3_ZN_1_FLR_2_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corner_Class_2_Pod_3_ZN_1_FLR_2_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_3_ZN_1_FLR_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_2_Pod_3_ZN_1_FLR_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mult_Class_2_Pod_3_ZN_1_FLR_2_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 53.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 53.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Main_Corridor_ZN_1_FLR_1,!- Zone Name Surface, !- Outside Boundary Condition Lobby_ZN_1_FLR_1_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 15.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Main_Corridor_ZN_1_FLR_1,!- Zone Name Surface, !- Outside Boundary Condition Gym_ZN_1_FLR_1_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,52.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 15.0000,52.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Main_Corridor_ZN_1_FLR_1,!- Zone Name Surface, !- Outside Boundary Condition Mech_ZN_1_FLR_1_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.0000,52.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,52.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,61.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 15.0000,61.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Main_Corridor_ZN_1_FLR_1,!- Zone Name Surface, !- Outside Boundary Condition Auditorium_ZN_1_FLR_1_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure 0.0, !- View Factor to Ground 4, !- Number of Vertices 15.0000,61.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,61.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,76.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 15.0000,76.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_1_Wall_5, !- Name Wall, !- Surface Type int_wall, !- Construction Name Main_Corridor_ZN_1_FLR_1,!- Zone Name Surface, !- Outside Boundary Condition Bathrooms_ZN_1_FLR_1_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.0000,76.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,76.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,76.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,76.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_1_Wall_6, !- Name Wall, !- Surface Type int_wall, !- Construction Name Main_Corridor_ZN_1_FLR_1,!- Zone Name Surface, !- Outside Boundary Condition Mult_Class_1_Pod_3_ZN_1_FLR_1_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,76.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,76.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,67.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,67.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_1_Wall_7, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Main_Corridor_ZN_1_FLR_1,!- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,67.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,67.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,49.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,49.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_1_Wall_8, !- Name Wall, !- Surface Type int_wall, !- Construction Name Main_Corridor_ZN_1_FLR_1,!- Zone Name Surface, !- Outside Boundary Condition Mult_Class_2_Pod_2_ZN_1_FLR_1_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,49.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,49.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,40.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,40.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_1_Wall_9, !- Name Wall, !- Surface Type int_wall, !- Construction Name Main_Corridor_ZN_1_FLR_1,!- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_2_ZN_1_FLR_1_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,40.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,40.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,35.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,35.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_1_Wall_10, !- Name Wall, !- Surface Type int_wall, !- Construction Name Main_Corridor_ZN_1_FLR_1,!- Zone Name Surface, !- Outside Boundary Condition Mult_Class_1_Pod_2_ZN_1_FLR_1_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,35.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,35.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,26.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,26.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_1_Wall_11, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Main_Corridor_ZN_1_FLR_1,!- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,26.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,26.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_1_Wall_12, !- Name Wall, !- Surface Type int_wall, !- Construction Name Main_Corridor_ZN_1_FLR_1,!- Zone Name Surface, !- Outside Boundary Condition Mult_Class_2_Pod_1_ZN_1_FLR_1_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_1_Floor, !- Name Floor, !- Surface Type Main_Corridor_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Main_Corridor_ZN_1_FLR_1,!- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,76.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,76.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Main_Corridor_ZN_1_FLR_1,!- Zone Name Surface, !- Outside Boundary Condition Main_Corridor_ZN_1_FLR_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,76.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,76.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_2_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Main_Corridor_ZN_1_FLR_2,!- Zone Name Surface, !- Outside Boundary Condition Lobby_ZN_1_FLR_2_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 15.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_2_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Main_Corridor_ZN_1_FLR_2,!- Zone Name Surface, !- Outside Boundary Condition Gym_ZN_1_FLR_2_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,52.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 15.0000,52.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_2_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Main_Corridor_ZN_1_FLR_2,!- Zone Name Surface, !- Outside Boundary Condition Mech_ZN_1_FLR_2_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.0000,52.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,52.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,61.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 15.0000,61.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_2_Wall_4, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Main_Corridor_ZN_1_FLR_2,!- Zone Name Surface, !- Outside Boundary Condition Auditorium_ZN_1_FLR_2_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure 0.0, !- View Factor to Ground 4, !- Number of Vertices 15.0000,61.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,61.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,76.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 15.0000,76.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_2_Wall_5, !- Name Wall, !- Surface Type int_wall, !- Construction Name Main_Corridor_ZN_1_FLR_2,!- Zone Name Surface, !- Outside Boundary Condition Bathrooms_ZN_1_FLR_2_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.0000,76.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,76.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,76.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,76.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_2_Wall_6, !- Name Wall, !- Surface Type int_wall, !- Construction Name Main_Corridor_ZN_1_FLR_2,!- Zone Name Surface, !- Outside Boundary Condition Mult_Class_1_Pod_3_ZN_1_FLR_2_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,76.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,76.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,67.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,67.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_2_Wall_7, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Main_Corridor_ZN_1_FLR_2,!- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,67.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,67.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,49.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,49.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_2_Wall_8, !- Name Wall, !- Surface Type int_wall, !- Construction Name Main_Corridor_ZN_1_FLR_2,!- Zone Name Surface, !- Outside Boundary Condition Mult_Class_2_Pod_2_ZN_1_FLR_2_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,49.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,49.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,40.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,40.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_2_Wall_9, !- Name Wall, !- Surface Type int_wall, !- Construction Name Main_Corridor_ZN_1_FLR_2,!- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_2_ZN_1_FLR_2_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,40.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,40.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,35.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,35.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_2_Wall_10, !- Name Wall, !- Surface Type int_wall, !- Construction Name Main_Corridor_ZN_1_FLR_2,!- Zone Name Surface, !- Outside Boundary Condition Mult_Class_1_Pod_2_ZN_1_FLR_2_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,35.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,35.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,26.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,26.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_2_Wall_11, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Main_Corridor_ZN_1_FLR_2,!- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,26.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,26.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_2_Wall_12, !- Name Wall, !- Surface Type int_wall, !- Construction Name Main_Corridor_ZN_1_FLR_2,!- Zone Name Surface, !- Outside Boundary Condition Mult_Class_2_Pod_1_ZN_1_FLR_2_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Main_Corridor_ZN_1_FLR_2,!- Zone Name Surface, !- Outside Boundary Condition Main_Corridor_ZN_1_FLR_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,76.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,76.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Main_Corridor_ZN_1_FLR_2_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Main_Corridor_ZN_1_FLR_2,!- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,76.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,76.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lobby_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Lobby_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 15.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lobby_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Lobby_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Offices_ZN_1_FLR_1_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 15.0000,14.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lobby_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Lobby_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Main_Corridor_ZN_1_FLR_1_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.0000,14.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,14.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lobby_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Lobby_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_1_ZN_1_FLR_1_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,14.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lobby_ZN_1_FLR_1_Wall_5, !- Name Wall, !- Surface Type int_wall, !- Construction Name Lobby_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_1_Pod_1_ZN_1_FLR_1_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lobby_ZN_1_FLR_1_Floor, !- Name Floor, !- Surface Type Lobby_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Lobby_ZN_1_FLR_1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lobby_ZN_1_FLR_1_Ceiling,!- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Lobby_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Lobby_ZN_1_FLR_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,14.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,14.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lobby_ZN_1_FLR_2_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Lobby_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 15.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lobby_ZN_1_FLR_2_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Lobby_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Offices_ZN_1_FLR_2_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 15.0000,14.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lobby_ZN_1_FLR_2_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Lobby_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Main_Corridor_ZN_1_FLR_2_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.0000,14.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,14.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lobby_ZN_1_FLR_2_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Lobby_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_1_ZN_1_FLR_2_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,14.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lobby_ZN_1_FLR_2_Wall_5, !- Name Wall, !- Surface Type int_wall, !- Construction Name Lobby_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_1_Pod_1_ZN_1_FLR_2_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lobby_ZN_1_FLR_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Lobby_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Lobby_ZN_1_FLR_1_Ceiling,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Lobby_ZN_1_FLR_2_Ceiling,!- Name Roof, !- Surface Type nonres_roof, !- Construction Name Lobby_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,14.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,14.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Bathrooms_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Bathrooms_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Main_Corridor_ZN_1_FLR_1_Wall_5, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 15.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Bathrooms_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Bathrooms_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Auditorium_ZN_1_FLR_1_Wall_4A, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure 0.0, !- View Factor to Ground 4, !- Number of Vertices 15.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,11.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 15.0000,11.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Bathrooms_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Bathrooms_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.0000,11.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,11.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 15.0000,14.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Bathrooms_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Bathrooms_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.0000,14.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,14.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Bathrooms_ZN_1_FLR_1_Wall_5, !- Name Wall, !- Surface Type int_wall, !- Construction Name Bathrooms_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_2_Pod_3_ZN_1_FLR_1_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,14.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Bathrooms_ZN_1_FLR_1_Wall_6, !- Name Wall, !- Surface Type int_wall, !- Construction Name Bathrooms_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_3_ZN_1_FLR_1_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Bathrooms_ZN_1_FLR_1_Floor, !- Name Floor, !- Surface Type Bathrooms_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Bathrooms_ZN_1_FLR_1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Bathrooms_ZN_1_FLR_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Bathrooms_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Bathrooms_ZN_1_FLR_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,14.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,14.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Bathrooms_ZN_1_FLR_2_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Bathrooms_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Main_Corridor_ZN_1_FLR_2_Wall_5, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 15.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Bathrooms_ZN_1_FLR_2_Wall_2, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Bathrooms_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Auditorium_ZN_1_FLR_2_Wall_4A, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure 0.0, !- View Factor to Ground 4, !- Number of Vertices 15.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,11.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 15.0000,11.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Bathrooms_ZN_1_FLR_2_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Bathrooms_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.0000,11.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,11.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 15.0000,14.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Bathrooms_ZN_1_FLR_2_Wall_4, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Bathrooms_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 15.0000,14.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,14.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Bathrooms_ZN_1_FLR_2_Wall_5, !- Name Wall, !- Surface Type int_wall, !- Construction Name Bathrooms_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Mult_Class_2_Pod_3_ZN_1_FLR_2_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,14.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,5.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Bathrooms_ZN_1_FLR_2_Wall_6, !- Name Wall, !- Surface Type int_wall, !- Construction Name Bathrooms_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Corridor_Pod_3_ZN_1_FLR_2_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,5.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,5.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Bathrooms_ZN_1_FLR_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Bathrooms_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Bathrooms_ZN_1_FLR_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Bathrooms_ZN_1_FLR_2_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Bathrooms_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 15.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 15.0000,14.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,14.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Offices_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Offices_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 38.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Offices_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Offices_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 38.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 38.0000,14.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Offices_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Offices_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Gym_ZN_1_FLR_1_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 38.0000,14.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,14.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Offices_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Offices_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Lobby_ZN_1_FLR_1_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,14.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Offices_ZN_1_FLR_1_Floor,!- Name Floor, !- Surface Type Offices_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Offices_ZN_1_FLR_1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Offices_ZN_1_FLR_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Offices_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Offices_ZN_1_FLR_2_Floor,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,14.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,14.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Offices_ZN_1_FLR_2_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Offices_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 38.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Offices_ZN_1_FLR_2_Wall_2, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Offices_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 38.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 38.0000,14.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Offices_ZN_1_FLR_2_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Offices_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Gym_ZN_1_FLR_2_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 38.0000,14.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,14.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Offices_ZN_1_FLR_2_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Offices_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Lobby_ZN_1_FLR_2_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,14.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Offices_ZN_1_FLR_2_Floor,!- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Offices_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Offices_ZN_1_FLR_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,14.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Offices_ZN_1_FLR_2_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Offices_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,14.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,14.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Gym_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Gym_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Offices_ZN_1_FLR_1_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 38.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Gym_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Gym_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Aux_Gym_ZN_1_FLR_1_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 38.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,52.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 38.0000,52.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Gym_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Gym_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mech_ZN_1_FLR_1_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 38.0000,52.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,52.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,52.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,52.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Gym_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Gym_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Main_Corridor_ZN_1_FLR_1_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,52.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,52.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Gym_ZN_1_FLR_1_Floor, !- Name Floor, !- Surface Type Gym_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Gym_ZN_1_FLR_1, !- Zone Name Adiabatic, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,52.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,52.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Gym_ZN_1_FLR_2_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Gym_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Offices_ZN_1_FLR_2_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,8.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 38.0000,0.0000,8.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Gym_ZN_1_FLR_2_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Gym_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Aux_Gym_ZN_1_FLR_2_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 38.0000,0.0000,8.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,52.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 38.0000,52.0000,8.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Gym_ZN_1_FLR_2_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Gym_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mech_ZN_1_FLR_2_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 38.0000,52.0000,8.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,52.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,52.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,52.0000,8.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Gym_ZN_1_FLR_2_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Gym_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Main_Corridor_ZN_1_FLR_2_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,52.0000,8.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,52.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,8.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Gym_ZN_1_FLR_2_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Gym_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,8.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,0.0000,8.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,52.0000,8.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,52.0000,8.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Aux_Gym_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Aux_Gym_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.000000000000,0.000000000000,8.000000000000, !- X,Y,Z ==> Vertex 1 {m} 0.000000000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 24.000000000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 24.000000000000,0.000000000000,8.000000000000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Aux_Gym_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Aux_Gym_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 24.000000000000,0.000000000000,8.000000000000, !- X,Y,Z ==> Vertex 1 {m} 24.000000000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 24.000000000000,52.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 24.000000000000,52.000000000000,8.000000000000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Aux_Gym_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Aux_Gym_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Kitchen_ZN_1_FLR_1_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 24.0000,52.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 24.0000,52.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,52.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,52.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Aux_Gym_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Aux_Gym_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Gym_ZN_1_FLR_1_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,52.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,52.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Aux_Gym_ZN_1_FLR_1_Floor,!- Name Floor, !- Surface Type Aux_Gym_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Aux_Gym_ZN_1_FLR_1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,52.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 24.0000,52.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 24.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Aux_Gym_ZN_1_FLR_2_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Aux_Gym_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition LIBRARY_MEDIA_CENTER_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 24.0000,52.0000,8.0000, !- X,Y,Z ==> Vertex 1 {m} 24.0000,52.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,52.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,52.0000,8.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Aux_Gym_ZN_1_FLR_2_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Aux_Gym_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Gym_ZN_1_FLR_2_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,52.0000,8.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,52.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,8.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Aux_Gym_ZN_1_FLR_2_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Aux_Gym_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,8.0000, !- X,Y,Z ==> Vertex 1 {m} 24.0000,0.0000,8.0000, !- X,Y,Z ==> Vertex 2 {m} 24.0000,52.0000,8.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,52.0000,8.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Auditorium_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Auditorium_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mech_ZN_1_FLR_1_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 38.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Auditorium_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Auditorium_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Cafeteria_ZN_1_FLR_1_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 38.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,26.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 38.0000,26.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Auditorium_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Auditorium_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 38.000000000000,26.000000000000,8.000000000000, !- X,Y,Z ==> Vertex 1 {m} 38.000000000000,26.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 0.000000000000,26.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 0.000000000000,26.000000000000,8.000000000000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Auditorium_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Auditorium_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Main_Corridor_ZN_1_FLR_1_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure 0.0, !- View Factor to Ground 4, !- Number of Vertices 0.000000000000,15.000000000000,4.000000000000, !- X,Y,Z ==> Vertex 1 {m} 0.000000000000,15.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 0.000000000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 0.000000000000,0.000000000000,4.000000000000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Auditorium_ZN_1_FLR_1_Floor, !- Name Floor, !- Surface Type Auditorium_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Auditorium_ZN_1_FLR_1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,26.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,26.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Auditorium_ZN_1_FLR_2_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Auditorium_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mech_ZN_1_FLR_2_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,8.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 38.0000,0.0000,8.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Auditorium_ZN_1_FLR_2_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Auditorium_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition LIBRARY_MEDIA_CENTER_Wall_4_B, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 38.0000,0.0000,8.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,26.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 38.0000,26.0000,8.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Auditorium_ZN_1_FLR_2_Wall_4, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Auditorium_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Main_Corridor_ZN_1_FLR_2_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure 0.0, !- View Factor to Ground 4, !- Number of Vertices 0.000000000000,15.000000000000,8.000000000000, !- X,Y,Z ==> Vertex 1 {m} 0.000000000000,15.000000000000,4.000000000000, !- X,Y,Z ==> Vertex 2 {m} 0.000000000000,0.000000000000,4.000000000000, !- X,Y,Z ==> Vertex 3 {m} 0.000000000000,0.000000000000,8.000000000000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Auditorium_ZN_1_FLR_2_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Auditorium_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,8.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,0.0000,8.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,26.0000,8.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,26.0000,8.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Kitchen_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Kitchen_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Aux_Gym_ZN_1_FLR_1_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 24.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 24.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Kitchen_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Kitchen_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 24.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 24.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 24.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 24.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Kitchen_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Kitchen_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Cafeteria_ZN_1_FLR_1_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 24.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 24.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Kitchen_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Kitchen_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mech_ZN_1_FLR_1_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Kitchen_ZN_1_FLR_1_Floor,!- Name Floor, !- Surface Type Kitchen_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Kitchen_ZN_1_FLR_1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 24.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 24.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Kitchen_ZN_1_FLR_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Kitchen_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition LIBRARY_MEDIA_CENTER_Floor_A, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 24.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 24.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, LIBRARY_MEDIA_CENTER_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Aux_Gym_ZN_1_FLR_2_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 24.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 24.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, LIBRARY_MEDIA_CENTER_Wall_2, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 24.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 24.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 24.0000,35.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 24.0000,35.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, LIBRARY_MEDIA_CENTER_Wall_4_A, !- Name Wall, !- Surface Type int_wall, !- Construction Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Mech_ZN_1_FLR_2_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, LIBRARY_MEDIA_CENTER_Floor_A, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Kitchen_ZN_1_FLR_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 24.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 24.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, LIBRARY_MEDIA_CENTER_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 24.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 24.0000,35.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,35.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, LIBRARY_MEDIA_CENTER_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 24.0000,35.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 24.0000,35.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,35.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,35.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, LIBRARY_MEDIA_CENTER_Wall_4_B, !- Name Wall, !- Surface Type int_wall, !- Construction Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Auditorium_ZN_1_FLR_2_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,35.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,35.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, LIBRARY_MEDIA_CENTER_Floor_B, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Cafeteria_ZN_1_FLR_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,35.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 24.0000,35.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 24.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Cafeteria_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Cafeteria_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Kitchen_ZN_1_FLR_1_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 24.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 24.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Cafeteria_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Cafeteria_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 24.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 24.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 24.0000,26.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 24.0000,26.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Cafeteria_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Cafeteria_ZN_1_FLR_1, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 24.0000,26.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 24.0000,26.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,26.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,26.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Cafeteria_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Cafeteria_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Auditorium_ZN_1_FLR_1_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,26.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,26.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Cafeteria_ZN_1_FLR_1_Floor, !- Name Floor, !- Surface Type Cafeteria_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Cafeteria_ZN_1_FLR_1, !- Zone Name GroundFCfactorMethod, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,26.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 24.0000,26.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 24.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Cafeteria_ZN_1_FLR_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Cafeteria_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition LIBRARY_MEDIA_CENTER_Floor_B, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 24.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 24.0000,26.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,26.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mech_ZN_1_FLR_1_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mech_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Gym_ZN_1_FLR_1_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 38.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mech_ZN_1_FLR_1_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mech_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Kitchen_ZN_1_FLR_1_Wall_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 38.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 38.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mech_ZN_1_FLR_1_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mech_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Auditorium_ZN_1_FLR_1_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 38.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mech_ZN_1_FLR_1_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mech_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Main_Corridor_ZN_1_FLR_1_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mech_ZN_1_FLR_1_Floor, !- Name Floor, !- Surface Type Mech_ZN_1_FLR_1_Floor_Ffactor, !- Construction Name Mech_ZN_1_FLR_1, !- Zone Name Adiabatic, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mech_ZN_1_FLR_1_Ceiling, !- Name Ceiling, !- Surface Type int_slab_ceiling, !- Construction Name Mech_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Mech_ZN_1_FLR_2_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mech_ZN_1_FLR_2_Wall_1, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mech_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Gym_ZN_1_FLR_2_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 38.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mech_ZN_1_FLR_2_Wall_2, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mech_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition LIBRARY_MEDIA_CENTER_Wall_4_A, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 38.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 38.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mech_ZN_1_FLR_2_Wall_3, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mech_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Auditorium_ZN_1_FLR_2_Wall_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 38.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mech_ZN_1_FLR_2_Wall_4, !- Name Wall, !- Surface Type int_wall, !- Construction Name Mech_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Main_Corridor_ZN_1_FLR_2_Wall_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mech_ZN_1_FLR_2_Floor, !- Name Floor, !- Surface Type int_slab_floor, !- Construction Name Mech_ZN_1_FLR_2, !- Zone Name Surface, !- Outside Boundary Condition Mech_ZN_1_FLR_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,9.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Mech_ZN_1_FLR_2_Ceiling, !- Name Roof, !- Surface Type nonres_roof, !- Construction Name Mech_ZN_1_FLR_2, !- Zone Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 1 {m} 38.0000,0.0000,4.0000, !- X,Y,Z ==> Vertex 2 {m} 38.0000,9.0000,4.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,9.0000,4.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Auditorium_ZN_1_FLR_2_Wall_4A, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Auditorium_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Bathrooms_ZN_1_FLR_2_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure 0.0, !- View Factor to Ground 4, !- Number of Vertices 0.000000000000,26.000000000000,8.000000000000, !- X,Y,Z ==> Vertex 1 {m} 0.000000000000,26.000000000000,4.000000000000, !- X,Y,Z ==> Vertex 2 {m} 0.000000000000,15.000000000000,4.000000000000, !- X,Y,Z ==> Vertex 3 {m} 0.000000000000,15.000000000000,8.000000000000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Auditorium_ZN_1_FLR_1_Wall_4A, !- Name Wall, !- Surface Type nonres_ext_wall, !- Construction Name Auditorium_ZN_1_FLR_1, !- Zone Name Surface, !- Outside Boundary Condition Bathrooms_ZN_1_FLR_1_Wall_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure 0.0, !- View Factor to Ground 4, !- Number of Vertices 0.000000000000,26.000000000000,4.000000000000, !- X,Y,Z ==> Vertex 1 {m} 0.000000000000,26.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 0.000000000000,15.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 0.000000000000,15.000000000000,4.000000000000; !- X,Y,Z ==> Vertex 4 {m} !- =========== ALL OBJECTS IN CLASS: FENESTRATIONSURFACE:DETAILED =========== FenestrationSurface:Detailed, Corner_Class_1_Pod_1_ZN_1_FLR_1_Wall_1_Window1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_1_Pod_1_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.050000000000,0.000000000000,2.512845, !- X,Y,Z ==> Vertex 1 {m} 0.050000000000,0.000000000000,0.922073000000, !- X,Y,Z ==> Vertex 2 {m} 1.269200000000,0.000000000000,0.922073000000, !- X,Y,Z ==> Vertex 3 {m} 1.269200000000,0.000000000000,2.512845; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_1_Pod_1_ZN_1_FLR_1_Wall_4_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_1_Pod_1_ZN_1_FLR_1_Wall_4, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,8.9500,2.515715, !- X,Y,Z ==> Vertex 1 {m} 0.000,8.9500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.000,0.0500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.000,0.0500,2.515715; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_1_Pod_1_ZN_1_FLR_2_Wall_1_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_1_Pod_1_ZN_1_FLR_2_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.050,0.0000,2.512845, !- X,Y,Z ==> Vertex 1 {m} 0.050,0.0000,1.1000, !- X,Y,Z ==> Vertex 2 {m} 10.950,0.0000,1.1000, !- X,Y,Z ==> Vertex 3 {m} 10.950,0.0000,2.512845; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_1_Pod_1_ZN_1_FLR_2_Wall_4_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_1_Pod_1_ZN_1_FLR_2_Wall_4, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,8.9500,2.515715, !- X,Y,Z ==> Vertex 1 {m} 0.000,8.9500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.000,0.0500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.000,0.0500,2.515715; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_1_Pod_1_ZN_1_FLR_2_Wall_1_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Mult_Class_1_Pod_1_ZN_1_FLR_2_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.050,0.0000,2.50266, !- X,Y,Z ==> Vertex 1 {m} 0.050,0.0000,1.1000, !- X,Y,Z ==> Vertex 2 {m} 52.950,0.0000,1.1000, !- X,Y,Z ==> Vertex 3 {m} 52.950,0.0000,2.50266; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corridor_Pod_1_ZN_1_FLR_1_Wall_6_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corridor_Pod_1_ZN_1_FLR_1_Wall_6, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,4.9500,2.52856, !- X,Y,Z ==> Vertex 1 {m} 0.000,4.9500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.000,0.0500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.000,0.0500,2.52856; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corridor_Pod_1_ZN_1_FLR_2_Wall_6_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corridor_Pod_1_ZN_1_FLR_2_Wall_6, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,4.9500,2.52856, !- X,Y,Z ==> Vertex 1 {m} 0.000,4.9500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.000,0.0500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.000,0.0500,2.52856; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_2_Pod_1_ZN_1_FLR_1_Wall_4_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_2_Pod_1_ZN_1_FLR_1_Wall_4, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,8.9500,2.515715, !- X,Y,Z ==> Vertex 1 {m} 0.000,8.9500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.000,0.0500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.000,0.0500,2.515715; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_2_Pod_1_ZN_1_FLR_2_Wall_3_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_2_Pod_1_ZN_1_FLR_2_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 10.950,9.0000,2.512845, !- X,Y,Z ==> Vertex 1 {m} 10.950,9.0000,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.050,9.0000,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.050,9.0000,2.512845; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_2_Pod_1_ZN_1_FLR_2_Wall_4_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_2_Pod_1_ZN_1_FLR_2_Wall_4, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,8.9500,2.515715, !- X,Y,Z ==> Vertex 1 {m} 0.000,8.9500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.000,0.0500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.000,0.0500,2.515715; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_2_Pod_1_ZN_1_FLR_2_Wall_3_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Mult_Class_2_Pod_1_ZN_1_FLR_2_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 52.950,9.0000,2.50266, !- X,Y,Z ==> Vertex 1 {m} 52.950,9.0000,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.050,9.0000,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.050,9.0000,2.50266; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_1_Pod_2_ZN_1_FLR_1_Wall_4_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_1_Pod_2_ZN_1_FLR_1_Wall_4, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,8.9500,2.515715, !- X,Y,Z ==> Vertex 1 {m} 0.000,8.9500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.000,0.0500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.000,0.0500,2.515715; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_1_Pod_2_ZN_1_FLR_2_Wall_1_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_1_Pod_2_ZN_1_FLR_2_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.050,0.0000,2.512845, !- X,Y,Z ==> Vertex 1 {m} 0.050,0.0000,1.1000, !- X,Y,Z ==> Vertex 2 {m} 10.950,0.0000,1.1000, !- X,Y,Z ==> Vertex 3 {m} 10.950,0.0000,2.512845; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_1_Pod_2_ZN_1_FLR_2_Wall_4_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_1_Pod_2_ZN_1_FLR_2_Wall_4, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,8.9500,2.515715, !- X,Y,Z ==> Vertex 1 {m} 0.000,8.9500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.000,0.0500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.000,0.0500,2.515715; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_1_Pod_2_ZN_1_FLR_2_Wall_1_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Mult_Class_1_Pod_2_ZN_1_FLR_2_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.050,0.0000,2.50266, !- X,Y,Z ==> Vertex 1 {m} 0.050,0.0000,1.1000, !- X,Y,Z ==> Vertex 2 {m} 52.950,0.0000,1.1000, !- X,Y,Z ==> Vertex 3 {m} 52.950,0.0000,2.50266; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corridor_Pod_2_ZN_1_FLR_1_Wall_6_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corridor_Pod_2_ZN_1_FLR_1_Wall_6, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,4.9500,2.52856, !- X,Y,Z ==> Vertex 1 {m} 0.000,4.9500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.000,0.0500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.000,0.0500,2.52856; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corridor_Pod_2_ZN_1_FLR_2_Wall_6_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corridor_Pod_2_ZN_1_FLR_2_Wall_6, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,4.9500,2.52856, !- X,Y,Z ==> Vertex 1 {m} 0.000,4.9500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.000,0.0500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.000,0.0500,2.52856; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_2_Pod_2_ZN_1_FLR_1_Wall_4_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_2_Pod_2_ZN_1_FLR_1_Wall_4, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,8.9500,2.515715, !- X,Y,Z ==> Vertex 1 {m} 0.000,8.9500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.000,0.0500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.000,0.0500,2.515715; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_2_Pod_2_ZN_1_FLR_2_Wall_3_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_2_Pod_2_ZN_1_FLR_2_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 10.950,9.0000,2.512845, !- X,Y,Z ==> Vertex 1 {m} 10.950,9.0000,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.050,9.0000,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.050,9.0000,2.512845; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_2_Pod_2_ZN_1_FLR_2_Wall_4_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_2_Pod_2_ZN_1_FLR_2_Wall_4, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,8.9500,2.515715, !- X,Y,Z ==> Vertex 1 {m} 0.000,8.9500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.000,0.0500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.000,0.0500,2.515715; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_2_Pod_2_ZN_1_FLR_2_Wall_3_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Mult_Class_2_Pod_2_ZN_1_FLR_2_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 52.950,9.0000,2.50266, !- X,Y,Z ==> Vertex 1 {m} 52.950,9.0000,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.050,9.0000,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.050,9.0000,2.50266; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_1_Pod_3_ZN_1_FLR_1_Wall_4_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_1_Pod_3_ZN_1_FLR_1_Wall_4, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,8.9500,2.515715, !- X,Y,Z ==> Vertex 1 {m} 0.000,8.9500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.000,0.0500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.000,0.0500,2.515715; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_1_Pod_3_ZN_1_FLR_2_Wall_1_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_1_Pod_3_ZN_1_FLR_2_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.050,0.0000,2.512845, !- X,Y,Z ==> Vertex 1 {m} 0.050,0.0000,1.1000, !- X,Y,Z ==> Vertex 2 {m} 10.950,0.0000,1.1000, !- X,Y,Z ==> Vertex 3 {m} 10.950,0.0000,2.512845; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_1_Pod_3_ZN_1_FLR_2_Wall_4_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_1_Pod_3_ZN_1_FLR_2_Wall_4, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,8.9500,2.515715, !- X,Y,Z ==> Vertex 1 {m} 0.000,8.9500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.000,0.0500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.000,0.0500,2.515715; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_1_Pod_3_ZN_1_FLR_2_Wall_1_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Mult_Class_1_Pod_3_ZN_1_FLR_2_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.050,0.0000,2.50266, !- X,Y,Z ==> Vertex 1 {m} 0.050,0.0000,1.1000, !- X,Y,Z ==> Vertex 2 {m} 52.950,0.0000,1.1000, !- X,Y,Z ==> Vertex 3 {m} 52.950,0.0000,2.50266; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corridor_Pod_3_ZN_1_FLR_1_Wall_6_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corridor_Pod_3_ZN_1_FLR_1_Wall_6, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,4.9500,2.52856, !- X,Y,Z ==> Vertex 1 {m} 0.000,4.9500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.000,0.0500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.000,0.0500,2.52856; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corridor_Pod_3_ZN_1_FLR_2_Wall_6_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corridor_Pod_3_ZN_1_FLR_2_Wall_6, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,4.9500,2.52856, !- X,Y,Z ==> Vertex 1 {m} 0.000,4.9500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.000,0.0500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.000,0.0500,2.52856; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_2_Pod_3_ZN_1_FLR_1_Wall_4_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_2_Pod_3_ZN_1_FLR_1_Wall_4, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,8.9500,2.515715, !- X,Y,Z ==> Vertex 1 {m} 0.000,8.9500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.000,0.0500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.000,0.0500,2.515715; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_2_Pod_3_ZN_1_FLR_2_Wall_3_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_2_Pod_3_ZN_1_FLR_2_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 10.950,9.0000,2.512845, !- X,Y,Z ==> Vertex 1 {m} 10.950,9.0000,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.050,9.0000,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.050,9.0000,2.512845; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_2_Pod_3_ZN_1_FLR_2_Wall_4_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_2_Pod_3_ZN_1_FLR_2_Wall_4, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,8.9500,2.515715, !- X,Y,Z ==> Vertex 1 {m} 0.000,8.9500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.000,0.0500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.000,0.0500,2.515715; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_2_Pod_3_ZN_1_FLR_2_Wall_3_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Mult_Class_2_Pod_3_ZN_1_FLR_2_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 52.950,9.0000,2.50266, !- X,Y,Z ==> Vertex 1 {m} 52.950,9.0000,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.050,9.0000,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.050,9.0000,2.50266; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Main_Corridor_ZN_1_FLR_2_Wall_7_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Main_Corridor_ZN_1_FLR_2_Wall_7, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,66.9500,2.507805, !- X,Y,Z ==> Vertex 1 {m} 0.000,66.9500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.000,49.0500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.000,49.0500,2.507805; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Main_Corridor_ZN_1_FLR_2_Wall_11_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Main_Corridor_ZN_1_FLR_2_Wall_11, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000,25.9500,2.508295, !- X,Y,Z ==> Vertex 1 {m} 0.000,25.9500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.000,9.0500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.000,9.0500,2.508295; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Lobby_ZN_1_FLR_2_Wall_1_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Lobby_ZN_1_FLR_2_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.050,0.0000,2.50938, !- X,Y,Z ==> Vertex 1 {m} 0.050,0.0000,1.1000, !- X,Y,Z ==> Vertex 2 {m} 14.950,0.0000,1.1000, !- X,Y,Z ==> Vertex 3 {m} 14.950,0.0000,2.50938; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Bathrooms_ZN_1_FLR_1_Wall_3_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Bathrooms_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 15.000,11.0500,2.548265, !- X,Y,Z ==> Vertex 1 {m} 15.000,11.0500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 15.000,13.9500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 15.000,13.9500,2.548265; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Bathrooms_ZN_1_FLR_1_Wall_4_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Bathrooms_ZN_1_FLR_1_Wall_4, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 14.950,14.0000,2.50938, !- X,Y,Z ==> Vertex 1 {m} 14.950,14.0000,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.050,14.0000,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.050,14.0000,2.50938; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Bathrooms_ZN_1_FLR_2_Wall_3_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Bathrooms_ZN_1_FLR_2_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 15.000,11.0500,2.548265, !- X,Y,Z ==> Vertex 1 {m} 15.000,11.0500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 15.000,13.9500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 15.000,13.9500,2.548265; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Bathrooms_ZN_1_FLR_2_Wall_4_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Bathrooms_ZN_1_FLR_2_Wall_4, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 14.950,14.0000,2.50938, !- X,Y,Z ==> Vertex 1 {m} 14.950,14.0000,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.050,14.0000,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.050,14.0000,2.50938; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Offices_ZN_1_FLR_1_Wall_2_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Offices_ZN_1_FLR_1_Wall_2, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 38.000,0.0500,2.51008, !- X,Y,Z ==> Vertex 1 {m} 38.000,0.0500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 38.000,13.9500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 38.000,13.9500,2.51008; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Offices_ZN_1_FLR_2_Wall_1_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Offices_ZN_1_FLR_2_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.050,0.0000,2.50371, !- X,Y,Z ==> Vertex 1 {m} 0.050,0.0000,1.1000, !- X,Y,Z ==> Vertex 2 {m} 37.950,0.0000,1.1000, !- X,Y,Z ==> Vertex 3 {m} 37.950,0.0000,2.50371; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Offices_ZN_1_FLR_2_Wall_2_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Offices_ZN_1_FLR_2_Wall_2, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 38.000,0.0500,2.51008, !- X,Y,Z ==> Vertex 1 {m} 38.000,0.0500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 38.000,13.9500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 38.000,13.9500,2.51008; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_1, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 2.5570,2.2793,8.0000, !- X,Y,Z ==> Vertex 1 {m} 3.7760,2.2793,8.0000, !- X,Y,Z ==> Vertex 2 {m} 3.7760,3.4985,8.0000, !- X,Y,Z ==> Vertex 3 {m} 2.5570,3.4985,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_2, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 8.8900,2.2793,8.0000, !- X,Y,Z ==> Vertex 1 {m} 10.1100,2.2793,8.0000, !- X,Y,Z ==> Vertex 2 {m} 10.1100,3.4985,8.0000, !- X,Y,Z ==> Vertex 3 {m} 8.8900,3.4985,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_3, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 15.2240,2.2793,8.0000, !- X,Y,Z ==> Vertex 1 {m} 16.4430,2.2793,8.0000, !- X,Y,Z ==> Vertex 2 {m} 16.4430,3.4985,8.0000, !- X,Y,Z ==> Vertex 3 {m} 15.2240,3.4985,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_4, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 21.5570,2.2793,8.0000, !- X,Y,Z ==> Vertex 1 {m} 22.7760,2.2793,8.0000, !- X,Y,Z ==> Vertex 2 {m} 22.7760,3.4985,8.0000, !- X,Y,Z ==> Vertex 3 {m} 21.5570,3.4985,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_5, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 27.8900,2.2793,8.0000, !- X,Y,Z ==> Vertex 1 {m} 29.1100,2.2793,8.0000, !- X,Y,Z ==> Vertex 2 {m} 29.1100,3.4985,8.0000, !- X,Y,Z ==> Vertex 3 {m} 27.8900,3.4985,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_6, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 34.2240,2.2793,8.0000, !- X,Y,Z ==> Vertex 1 {m} 35.4430,2.2793,8.0000, !- X,Y,Z ==> Vertex 2 {m} 35.4430,3.4985,8.0000, !- X,Y,Z ==> Vertex 3 {m} 34.2240,3.4985,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_7, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 2.5570,8.0571,8.0000, !- X,Y,Z ==> Vertex 1 {m} 3.7760,8.0571,8.0000, !- X,Y,Z ==> Vertex 2 {m} 3.7760,9.2763,8.0000, !- X,Y,Z ==> Vertex 3 {m} 2.5570,9.2763,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_8, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 8.8900,8.0571,8.0000, !- X,Y,Z ==> Vertex 1 {m} 10.1100,8.0571,8.0000, !- X,Y,Z ==> Vertex 2 {m} 10.1100,9.2763,8.0000, !- X,Y,Z ==> Vertex 3 {m} 8.8900,9.2763,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_9, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 15.2240,8.0571,8.0000, !- X,Y,Z ==> Vertex 1 {m} 16.4430,8.0571,8.0000, !- X,Y,Z ==> Vertex 2 {m} 16.4430,9.2763,8.0000, !- X,Y,Z ==> Vertex 3 {m} 15.2240,9.2763,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_10, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 21.5570,8.0571,8.0000, !- X,Y,Z ==> Vertex 1 {m} 22.7760,8.0571,8.0000, !- X,Y,Z ==> Vertex 2 {m} 22.7760,9.2763,8.0000, !- X,Y,Z ==> Vertex 3 {m} 21.5570,9.2763,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_11, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 27.8900,8.0571,8.0000, !- X,Y,Z ==> Vertex 1 {m} 29.1100,8.0571,8.0000, !- X,Y,Z ==> Vertex 2 {m} 29.1100,9.2763,8.0000, !- X,Y,Z ==> Vertex 3 {m} 27.8900,9.2763,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_12, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 34.2240,8.0571,8.0000, !- X,Y,Z ==> Vertex 1 {m} 35.4430,8.0571,8.0000, !- X,Y,Z ==> Vertex 2 {m} 35.4430,9.2763,8.0000, !- X,Y,Z ==> Vertex 3 {m} 34.2240,9.2763,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_13, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 2.5570,13.8348,8.0000, !- X,Y,Z ==> Vertex 1 {m} 3.7760,13.8348,8.0000, !- X,Y,Z ==> Vertex 2 {m} 3.7760,15.0540,8.0000, !- X,Y,Z ==> Vertex 3 {m} 2.5570,15.0540,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_14, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 8.8900,13.8348,8.0000, !- X,Y,Z ==> Vertex 1 {m} 10.1100,13.8348,8.0000, !- X,Y,Z ==> Vertex 2 {m} 10.1100,15.0540,8.0000, !- X,Y,Z ==> Vertex 3 {m} 8.8900,15.0540,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_15, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 15.2240,13.8348,8.0000, !- X,Y,Z ==> Vertex 1 {m} 16.4430,13.8348,8.0000, !- X,Y,Z ==> Vertex 2 {m} 16.4430,15.0540,8.0000, !- X,Y,Z ==> Vertex 3 {m} 15.2240,15.0540,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_16, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 21.5570,13.8348,8.0000, !- X,Y,Z ==> Vertex 1 {m} 22.7760,13.8348,8.0000, !- X,Y,Z ==> Vertex 2 {m} 22.7760,15.0540,8.0000, !- X,Y,Z ==> Vertex 3 {m} 21.5570,15.0540,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_17, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 27.8900,13.8348,8.0000, !- X,Y,Z ==> Vertex 1 {m} 29.1100,13.8348,8.0000, !- X,Y,Z ==> Vertex 2 {m} 29.1100,15.0540,8.0000, !- X,Y,Z ==> Vertex 3 {m} 27.8900,15.0540,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_18, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 34.2240,13.8348,8.0000, !- X,Y,Z ==> Vertex 1 {m} 35.4430,13.8348,8.0000, !- X,Y,Z ==> Vertex 2 {m} 35.4430,15.0540,8.0000, !- X,Y,Z ==> Vertex 3 {m} 34.2240,15.0540,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_19, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 2.5570,19.6126,8.0000, !- X,Y,Z ==> Vertex 1 {m} 3.7760,19.6126,8.0000, !- X,Y,Z ==> Vertex 2 {m} 3.7760,20.8318,8.0000, !- X,Y,Z ==> Vertex 3 {m} 2.5570,20.8318,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_20, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 8.8900,19.6126,8.0000, !- X,Y,Z ==> Vertex 1 {m} 10.1100,19.6126,8.0000, !- X,Y,Z ==> Vertex 2 {m} 10.1100,20.8318,8.0000, !- X,Y,Z ==> Vertex 3 {m} 8.8900,20.8318,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_21, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 15.2240,19.6126,8.0000, !- X,Y,Z ==> Vertex 1 {m} 16.4430,19.6126,8.0000, !- X,Y,Z ==> Vertex 2 {m} 16.4430,20.8318,8.0000, !- X,Y,Z ==> Vertex 3 {m} 15.2240,20.8318,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_22, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 21.5570,19.6126,8.0000, !- X,Y,Z ==> Vertex 1 {m} 22.7760,19.6126,8.0000, !- X,Y,Z ==> Vertex 2 {m} 22.7760,20.8318,8.0000, !- X,Y,Z ==> Vertex 3 {m} 21.5570,20.8318,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_23, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 27.8900,19.6126,8.0000, !- X,Y,Z ==> Vertex 1 {m} 29.1100,19.6126,8.0000, !- X,Y,Z ==> Vertex 2 {m} 29.1100,20.8318,8.0000, !- X,Y,Z ==> Vertex 3 {m} 27.8900,20.8318,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_24, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 34.2240,19.6126,8.0000, !- X,Y,Z ==> Vertex 1 {m} 35.4430,19.6126,8.0000, !- X,Y,Z ==> Vertex 2 {m} 35.4430,20.8318,8.0000, !- X,Y,Z ==> Vertex 3 {m} 34.2240,20.8318,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_25, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 2.5570,25.3904,8.0000, !- X,Y,Z ==> Vertex 1 {m} 3.7760,25.3904,8.0000, !- X,Y,Z ==> Vertex 2 {m} 3.7760,26.6096,8.0000, !- X,Y,Z ==> Vertex 3 {m} 2.5570,26.6096,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_26, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 8.8900,25.3904,8.0000, !- X,Y,Z ==> Vertex 1 {m} 10.1100,25.3904,8.0000, !- X,Y,Z ==> Vertex 2 {m} 10.1100,26.6096,8.0000, !- X,Y,Z ==> Vertex 3 {m} 8.8900,26.6096,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_27, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 15.2240,25.3904,8.0000, !- X,Y,Z ==> Vertex 1 {m} 16.4430,25.3904,8.0000, !- X,Y,Z ==> Vertex 2 {m} 16.4430,26.6096,8.0000, !- X,Y,Z ==> Vertex 3 {m} 15.2240,26.6096,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_28, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 21.5570,25.3904,8.0000, !- X,Y,Z ==> Vertex 1 {m} 22.7760,25.3904,8.0000, !- X,Y,Z ==> Vertex 2 {m} 22.7760,26.6096,8.0000, !- X,Y,Z ==> Vertex 3 {m} 21.5570,26.6096,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_29, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 27.8900,25.3904,8.0000, !- X,Y,Z ==> Vertex 1 {m} 29.1100,25.3904,8.0000, !- X,Y,Z ==> Vertex 2 {m} 29.1100,26.6096,8.0000, !- X,Y,Z ==> Vertex 3 {m} 27.8900,26.6096,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_30, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 34.2240,25.3904,8.0000, !- X,Y,Z ==> Vertex 1 {m} 35.4430,25.3904,8.0000, !- X,Y,Z ==> Vertex 2 {m} 35.4430,26.6096,8.0000, !- X,Y,Z ==> Vertex 3 {m} 34.2240,26.6096,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_31, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 2.5570,31.1682,8.0000, !- X,Y,Z ==> Vertex 1 {m} 3.7760,31.1682,8.0000, !- X,Y,Z ==> Vertex 2 {m} 3.7760,32.3874,8.0000, !- X,Y,Z ==> Vertex 3 {m} 2.5570,32.3874,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_32, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 8.8900,31.1682,8.0000, !- X,Y,Z ==> Vertex 1 {m} 10.1100,31.1682,8.0000, !- X,Y,Z ==> Vertex 2 {m} 10.1100,32.3874,8.0000, !- X,Y,Z ==> Vertex 3 {m} 8.8900,32.3874,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_33, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 15.2240,31.1682,8.0000, !- X,Y,Z ==> Vertex 1 {m} 16.4430,31.1682,8.0000, !- X,Y,Z ==> Vertex 2 {m} 16.4430,32.3874,8.0000, !- X,Y,Z ==> Vertex 3 {m} 15.2240,32.3874,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_34, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 21.5570,31.1682,8.0000, !- X,Y,Z ==> Vertex 1 {m} 22.7760,31.1682,8.0000, !- X,Y,Z ==> Vertex 2 {m} 22.7760,32.3874,8.0000, !- X,Y,Z ==> Vertex 3 {m} 21.5570,32.3874,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_35, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 27.8900,31.1682,8.0000, !- X,Y,Z ==> Vertex 1 {m} 29.1100,31.1682,8.0000, !- X,Y,Z ==> Vertex 2 {m} 29.1100,32.3874,8.0000, !- X,Y,Z ==> Vertex 3 {m} 27.8900,32.3874,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_36, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 34.2240,31.1682,8.0000, !- X,Y,Z ==> Vertex 1 {m} 35.4430,31.1682,8.0000, !- X,Y,Z ==> Vertex 2 {m} 35.4430,32.3874,8.0000, !- X,Y,Z ==> Vertex 3 {m} 34.2240,32.3874,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_37, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 2.5570,36.9460,8.0000, !- X,Y,Z ==> Vertex 1 {m} 3.7760,36.9460,8.0000, !- X,Y,Z ==> Vertex 2 {m} 3.7760,38.1652,8.0000, !- X,Y,Z ==> Vertex 3 {m} 2.5570,38.1652,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_38, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 8.8900,36.9460,8.0000, !- X,Y,Z ==> Vertex 1 {m} 10.1100,36.9460,8.0000, !- X,Y,Z ==> Vertex 2 {m} 10.1100,38.1652,8.0000, !- X,Y,Z ==> Vertex 3 {m} 8.8900,38.1652,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_39, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 15.2240,36.9460,8.0000, !- X,Y,Z ==> Vertex 1 {m} 16.4430,36.9460,8.0000, !- X,Y,Z ==> Vertex 2 {m} 16.4430,38.1652,8.0000, !- X,Y,Z ==> Vertex 3 {m} 15.2240,38.1652,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_40, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 21.5570,36.9460,8.0000, !- X,Y,Z ==> Vertex 1 {m} 22.7760,36.9460,8.0000, !- X,Y,Z ==> Vertex 2 {m} 22.7760,38.1652,8.0000, !- X,Y,Z ==> Vertex 3 {m} 21.5570,38.1652,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_41, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 27.8900,36.9460,8.0000, !- X,Y,Z ==> Vertex 1 {m} 29.1100,36.9460,8.0000, !- X,Y,Z ==> Vertex 2 {m} 29.1100,38.1652,8.0000, !- X,Y,Z ==> Vertex 3 {m} 27.8900,38.1652,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_42, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 34.2240,36.9460,8.0000, !- X,Y,Z ==> Vertex 1 {m} 35.4430,36.9460,8.0000, !- X,Y,Z ==> Vertex 2 {m} 35.4430,38.1652,8.0000, !- X,Y,Z ==> Vertex 3 {m} 34.2240,38.1652,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_43, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 2.5570,42.7237,8.0000, !- X,Y,Z ==> Vertex 1 {m} 3.7760,42.7237,8.0000, !- X,Y,Z ==> Vertex 2 {m} 3.7760,43.9429,8.0000, !- X,Y,Z ==> Vertex 3 {m} 2.5570,43.9429,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_44, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 8.8900,42.7237,8.0000, !- X,Y,Z ==> Vertex 1 {m} 10.1100,42.7237,8.0000, !- X,Y,Z ==> Vertex 2 {m} 10.1100,43.9429,8.0000, !- X,Y,Z ==> Vertex 3 {m} 8.8900,43.9429,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_45, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 15.2240,42.7237,8.0000, !- X,Y,Z ==> Vertex 1 {m} 16.4430,42.7237,8.0000, !- X,Y,Z ==> Vertex 2 {m} 16.4430,43.9429,8.0000, !- X,Y,Z ==> Vertex 3 {m} 15.2240,43.9429,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_46, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 21.5570,42.7237,8.0000, !- X,Y,Z ==> Vertex 1 {m} 22.7760,42.7237,8.0000, !- X,Y,Z ==> Vertex 2 {m} 22.7760,43.9429,8.0000, !- X,Y,Z ==> Vertex 3 {m} 21.5570,43.9429,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_47, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 27.8900,42.7237,8.0000, !- X,Y,Z ==> Vertex 1 {m} 29.1100,42.7237,8.0000, !- X,Y,Z ==> Vertex 2 {m} 29.1100,43.9429,8.0000, !- X,Y,Z ==> Vertex 3 {m} 27.8900,43.9429,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_48, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 34.2240,42.7237,8.0000, !- X,Y,Z ==> Vertex 1 {m} 35.4430,42.7237,8.0000, !- X,Y,Z ==> Vertex 2 {m} 35.4430,43.9429,8.0000, !- X,Y,Z ==> Vertex 3 {m} 34.2240,43.9429,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_49, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 2.5570,48.5015,8.0000, !- X,Y,Z ==> Vertex 1 {m} 3.7760,48.5015,8.0000, !- X,Y,Z ==> Vertex 2 {m} 3.7760,49.7207,8.0000, !- X,Y,Z ==> Vertex 3 {m} 2.5570,49.7207,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_50, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 8.8900,48.5015,8.0000, !- X,Y,Z ==> Vertex 1 {m} 10.1100,48.5015,8.0000, !- X,Y,Z ==> Vertex 2 {m} 10.1100,49.7207,8.0000, !- X,Y,Z ==> Vertex 3 {m} 8.8900,49.7207,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_51, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 15.2240,48.5015,8.0000, !- X,Y,Z ==> Vertex 1 {m} 16.4430,48.5015,8.0000, !- X,Y,Z ==> Vertex 2 {m} 16.4430,49.7207,8.0000, !- X,Y,Z ==> Vertex 3 {m} 15.2240,49.7207,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_52, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 21.5570,48.5015,8.0000, !- X,Y,Z ==> Vertex 1 {m} 22.7760,48.5015,8.0000, !- X,Y,Z ==> Vertex 2 {m} 22.7760,49.7207,8.0000, !- X,Y,Z ==> Vertex 3 {m} 21.5570,49.7207,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_53, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 27.8900,48.5015,8.0000, !- X,Y,Z ==> Vertex 1 {m} 29.1100,48.5015,8.0000, !- X,Y,Z ==> Vertex 2 {m} 29.1100,49.7207,8.0000, !- X,Y,Z ==> Vertex 3 {m} 27.8900,49.7207,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Gym_ZN_1_FLR_2_skylight_54, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 34.2240,48.5015,8.0000, !- X,Y,Z ==> Vertex 1 {m} 35.4430,48.5015,8.0000, !- X,Y,Z ==> Vertex 2 {m} 35.4430,49.7207,8.0000, !- X,Y,Z ==> Vertex 3 {m} 34.2240,49.7207,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_Wall_1_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.050000000000,0.000000000000,6.505845, 0.050000000000,0.000000000000,3.694155720000, !- X,Y,Z ==> Vertex 2 {m} 23.950000000000,0.000000000000,3.694155720000, !- X,Y,Z ==> Vertex 3 {m} 23.950000000000,0.000000000000,6.505845; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_Wall_2_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_1_Wall_2, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 24.000000000000,0.050000000000,6.502695, !- X,Y,Z ==> Vertex 1 {m} 24.000000000000,0.050000000000,3.697305320000, !- X,Y,Z ==> Vertex 2 {m} 24.000000000000,51.950000000000,3.697305320000, !- X,Y,Z ==> Vertex 3 {m} 24.000000000000,51.950000000000,6.502695; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_1, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 2.3900,2.2793,8.0000, !- X,Y,Z ==> Vertex 1 {m} 3.6100,2.2793,8.0000, !- X,Y,Z ==> Vertex 2 {m} 3.6100,3.4985,8.0000, !- X,Y,Z ==> Vertex 3 {m} 2.3900,3.4985,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_2, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 8.3900,2.2793,8.0000, !- X,Y,Z ==> Vertex 1 {m} 9.6100,2.2793,8.0000, !- X,Y,Z ==> Vertex 2 {m} 9.6100,3.4985,8.0000, !- X,Y,Z ==> Vertex 3 {m} 8.3900,3.4985,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_3, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 14.3900,2.2793,8.0000, !- X,Y,Z ==> Vertex 1 {m} 15.6100,2.2793,8.0000, !- X,Y,Z ==> Vertex 2 {m} 15.6100,3.4985,8.0000, !- X,Y,Z ==> Vertex 3 {m} 14.3900,3.4985,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_4, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 20.3900,2.2793,8.0000, !- X,Y,Z ==> Vertex 1 {m} 21.6100,2.2793,8.0000, !- X,Y,Z ==> Vertex 2 {m} 21.6100,3.4985,8.0000, !- X,Y,Z ==> Vertex 3 {m} 20.3900,3.4985,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_5, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 2.3900,8.0571,8.0000, !- X,Y,Z ==> Vertex 1 {m} 3.6100,8.0571,8.0000, !- X,Y,Z ==> Vertex 2 {m} 3.6100,9.2763,8.0000, !- X,Y,Z ==> Vertex 3 {m} 2.3900,9.2763,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_6, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 8.3900,8.0571,8.0000, !- X,Y,Z ==> Vertex 1 {m} 9.6100,8.0571,8.0000, !- X,Y,Z ==> Vertex 2 {m} 9.6100,9.2763,8.0000, !- X,Y,Z ==> Vertex 3 {m} 8.3900,9.2763,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_7, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 14.3900,8.0571,8.0000, !- X,Y,Z ==> Vertex 1 {m} 15.6100,8.0571,8.0000, !- X,Y,Z ==> Vertex 2 {m} 15.6100,9.2763,8.0000, !- X,Y,Z ==> Vertex 3 {m} 14.3900,9.2763,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_8, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 20.3900,8.0571,8.0000, !- X,Y,Z ==> Vertex 1 {m} 21.6100,8.0571,8.0000, !- X,Y,Z ==> Vertex 2 {m} 21.6100,9.2763,8.0000, !- X,Y,Z ==> Vertex 3 {m} 20.3900,9.2763,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_9, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 2.3900,13.8348,8.0000, !- X,Y,Z ==> Vertex 1 {m} 3.6100,13.8348,8.0000, !- X,Y,Z ==> Vertex 2 {m} 3.6100,15.0540,8.0000, !- X,Y,Z ==> Vertex 3 {m} 2.3900,15.0540,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_10, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 8.3900,13.8348,8.0000, !- X,Y,Z ==> Vertex 1 {m} 9.6100,13.8348,8.0000, !- X,Y,Z ==> Vertex 2 {m} 9.6100,15.0540,8.0000, !- X,Y,Z ==> Vertex 3 {m} 8.3900,15.0540,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_11, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 14.3900,13.8348,8.0000, !- X,Y,Z ==> Vertex 1 {m} 15.6100,13.8348,8.0000, !- X,Y,Z ==> Vertex 2 {m} 15.6100,15.0540,8.0000, !- X,Y,Z ==> Vertex 3 {m} 14.3900,15.0540,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_12, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 20.3900,13.8348,8.0000, !- X,Y,Z ==> Vertex 1 {m} 21.6100,13.8348,8.0000, !- X,Y,Z ==> Vertex 2 {m} 21.6100,15.0540,8.0000, !- X,Y,Z ==> Vertex 3 {m} 20.3900,15.0540,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_13, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 2.3900,19.6126,8.0000, !- X,Y,Z ==> Vertex 1 {m} 3.6100,19.6126,8.0000, !- X,Y,Z ==> Vertex 2 {m} 3.6100,20.8318,8.0000, !- X,Y,Z ==> Vertex 3 {m} 2.3900,20.8318,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_14, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 8.3900,19.6126,8.0000, !- X,Y,Z ==> Vertex 1 {m} 9.6100,19.6126,8.0000, !- X,Y,Z ==> Vertex 2 {m} 9.6100,20.8318,8.0000, !- X,Y,Z ==> Vertex 3 {m} 8.3900,20.8318,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_15, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 14.3900,19.6126,8.0000, !- X,Y,Z ==> Vertex 1 {m} 15.6100,19.6126,8.0000, !- X,Y,Z ==> Vertex 2 {m} 15.6100,20.8318,8.0000, !- X,Y,Z ==> Vertex 3 {m} 14.3900,20.8318,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_16, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 20.3900,19.6126,8.0000, !- X,Y,Z ==> Vertex 1 {m} 21.6100,19.6126,8.0000, !- X,Y,Z ==> Vertex 2 {m} 21.6100,20.8318,8.0000, !- X,Y,Z ==> Vertex 3 {m} 20.3900,20.8318,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_17, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 2.3900,25.3904,8.0000, !- X,Y,Z ==> Vertex 1 {m} 3.6100,25.3904,8.0000, !- X,Y,Z ==> Vertex 2 {m} 3.6100,26.6096,8.0000, !- X,Y,Z ==> Vertex 3 {m} 2.3900,26.6096,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_18, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 8.3900,25.3904,8.0000, !- X,Y,Z ==> Vertex 1 {m} 9.6100,25.3904,8.0000, !- X,Y,Z ==> Vertex 2 {m} 9.6100,26.6096,8.0000, !- X,Y,Z ==> Vertex 3 {m} 8.3900,26.6096,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_19, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 14.3900,25.3904,8.0000, !- X,Y,Z ==> Vertex 1 {m} 15.6100,25.3904,8.0000, !- X,Y,Z ==> Vertex 2 {m} 15.6100,26.6096,8.0000, !- X,Y,Z ==> Vertex 3 {m} 14.3900,26.6096,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_20, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 20.3900,25.3904,8.0000, !- X,Y,Z ==> Vertex 1 {m} 21.6100,25.3904,8.0000, !- X,Y,Z ==> Vertex 2 {m} 21.6100,26.6096,8.0000, !- X,Y,Z ==> Vertex 3 {m} 20.3900,26.6096,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_21, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 2.3900,31.1682,8.0000, !- X,Y,Z ==> Vertex 1 {m} 3.6100,31.1682,8.0000, !- X,Y,Z ==> Vertex 2 {m} 3.6100,32.3874,8.0000, !- X,Y,Z ==> Vertex 3 {m} 2.3900,32.3874,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_22, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 8.3900,31.1682,8.0000, !- X,Y,Z ==> Vertex 1 {m} 9.6100,31.1682,8.0000, !- X,Y,Z ==> Vertex 2 {m} 9.6100,32.3874,8.0000, !- X,Y,Z ==> Vertex 3 {m} 8.3900,32.3874,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_23, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 14.3900,31.1682,8.0000, !- X,Y,Z ==> Vertex 1 {m} 15.6100,31.1682,8.0000, !- X,Y,Z ==> Vertex 2 {m} 15.6100,32.3874,8.0000, !- X,Y,Z ==> Vertex 3 {m} 14.3900,32.3874,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_24, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 20.3900,31.1682,8.0000, !- X,Y,Z ==> Vertex 1 {m} 21.6100,31.1682,8.0000, !- X,Y,Z ==> Vertex 2 {m} 21.6100,32.3874,8.0000, !- X,Y,Z ==> Vertex 3 {m} 20.3900,32.3874,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_25, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 2.3900,36.9460,8.0000, !- X,Y,Z ==> Vertex 1 {m} 3.6100,36.9460,8.0000, !- X,Y,Z ==> Vertex 2 {m} 3.6100,38.1652,8.0000, !- X,Y,Z ==> Vertex 3 {m} 2.3900,38.1652,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_26, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 8.3900,36.9460,8.0000, !- X,Y,Z ==> Vertex 1 {m} 9.6100,36.9460,8.0000, !- X,Y,Z ==> Vertex 2 {m} 9.6100,38.1652,8.0000, !- X,Y,Z ==> Vertex 3 {m} 8.3900,38.1652,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_27, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 14.3900,36.9460,8.0000, !- X,Y,Z ==> Vertex 1 {m} 15.6100,36.9460,8.0000, !- X,Y,Z ==> Vertex 2 {m} 15.6100,38.1652,8.0000, !- X,Y,Z ==> Vertex 3 {m} 14.3900,38.1652,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_28, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 20.3900,36.9460,8.0000, !- X,Y,Z ==> Vertex 1 {m} 21.6100,36.9460,8.0000, !- X,Y,Z ==> Vertex 2 {m} 21.6100,38.1652,8.0000, !- X,Y,Z ==> Vertex 3 {m} 20.3900,38.1652,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_29, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 2.3900,42.7237,8.0000, !- X,Y,Z ==> Vertex 1 {m} 3.6100,42.7237,8.0000, !- X,Y,Z ==> Vertex 2 {m} 3.6100,43.9429,8.0000, !- X,Y,Z ==> Vertex 3 {m} 2.3900,43.9429,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_30, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 8.3900,42.7237,8.0000, !- X,Y,Z ==> Vertex 1 {m} 9.6100,42.7237,8.0000, !- X,Y,Z ==> Vertex 2 {m} 9.6100,43.9429,8.0000, !- X,Y,Z ==> Vertex 3 {m} 8.3900,43.9429,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_31, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 14.3900,42.7237,8.0000, !- X,Y,Z ==> Vertex 1 {m} 15.6100,42.7237,8.0000, !- X,Y,Z ==> Vertex 2 {m} 15.6100,43.9429,8.0000, !- X,Y,Z ==> Vertex 3 {m} 14.3900,43.9429,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_32, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 20.3900,42.7237,8.0000, !- X,Y,Z ==> Vertex 1 {m} 21.6100,42.7237,8.0000, !- X,Y,Z ==> Vertex 2 {m} 21.6100,43.9429,8.0000, !- X,Y,Z ==> Vertex 3 {m} 20.3900,43.9429,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_33, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 2.3900,48.5015,8.0000, !- X,Y,Z ==> Vertex 1 {m} 3.6100,48.5015,8.0000, !- X,Y,Z ==> Vertex 2 {m} 3.6100,49.7207,8.0000, !- X,Y,Z ==> Vertex 3 {m} 2.3900,49.7207,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_34, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 8.3900,48.5015,8.0000, !- X,Y,Z ==> Vertex 1 {m} 9.6100,48.5015,8.0000, !- X,Y,Z ==> Vertex 2 {m} 9.6100,49.7207,8.0000, !- X,Y,Z ==> Vertex 3 {m} 8.3900,49.7207,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_35, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 14.3900,48.5015,8.0000, !- X,Y,Z ==> Vertex 1 {m} 15.6100,48.5015,8.0000, !- X,Y,Z ==> Vertex 2 {m} 15.6100,49.7207,8.0000, !- X,Y,Z ==> Vertex 3 {m} 14.3900,49.7207,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_2_skylight_36, !- Name Window, !- Surface Type NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name!- Field 12 Aux_Gym_ZN_1_FLR_2_Ceiling, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground Skylight_Frame, !- Frame and Divider Name 1, !- Multiplier 4, !- Number of Vertices 20.3900,48.5015,8.0000, !- X,Y,Z ==> Vertex 1 {m} 21.6100,48.5015,8.0000, !- X,Y,Z ==> Vertex 2 {m} 21.6100,49.7207,8.0000, !- X,Y,Z ==> Vertex 3 {m} 20.3900,49.7207,8.0000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Auditorium_ZN_1_FLR_2_Wall_3_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Auditorium_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 37.950000000000,26.000000000000,6.50371, !- X,Y,Z ==> Vertex 1 {m} 37.950000000000,26.000000000000,3.696289320000, !- X,Y,Z ==> Vertex 2 {m} 0.050000000000,26.000000000000,3.696289320000, !- X,Y,Z ==> Vertex 3 {m} 0.050000000000,26.000000000000,6.50371; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Kitchen_ZN_1_FLR_1_Wall_2_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Kitchen_ZN_1_FLR_1_Wall_2, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 24.000,0.0500,2.515715, !- X,Y,Z ==> Vertex 1 {m} 24.000,0.0500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 24.000,8.9500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 24.000,8.9500,2.515715; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, LIBRARY_MEDIA_CENTER_Wall_2_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 LIBRARY_MEDIA_CENTER_Wall_2, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 24.000,0.0500,2.504025, !- X,Y,Z ==> Vertex 1 {m} 24.000,0.0500,1.1000, !- X,Y,Z ==> Vertex 2 {m} 24.000,34.9500,1.1000, !- X,Y,Z ==> Vertex 3 {m} 24.000,34.9500,2.504025; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, LIBRARY_MEDIA_CENTER_Wall_3_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 LIBRARY_MEDIA_CENTER_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 23.950,35.0000,2.505845, !- X,Y,Z ==> Vertex 1 {m} 23.950,35.0000,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.050,35.0000,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.050,35.0000,2.505845; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Cafeteria_ZN_1_FLR_1_Wall_2_Window2, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Cafeteria_ZN_1_FLR_1_Wall_2, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 24.000000000000,2.488400000000,2.50539, !- X,Y,Z ==> Vertex 1 {m} 24.000000000000,2.488400000000,1.030581800000, !- X,Y,Z ==> Vertex 2 {m} 24.000000000000,25.950000000000,1.030581800000, !- X,Y,Z ==> Vertex 3 {m} 24.000000000000,25.950000000000,2.50539; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Cafeteria_ZN_1_FLR_1_Wall_3_window_1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Cafeteria_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 23.950,26.0000,2.505845, !- X,Y,Z ==> Vertex 1 {m} 23.950,26.0000,1.1000, !- X,Y,Z ==> Vertex 2 {m} 0.050,26.0000,1.1000, !- X,Y,Z ==> Vertex 3 {m} 0.050,26.0000,2.505845; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_2_Pod_3_ZN_1_FLR_1_Wall_3_Window1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Mult_Class_2_Pod_3_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 52.950000000000,9.000000000000,2.50266, !- X,Y,Z ==> Vertex 1 {m} 52.946281052104,9.000000000000,1.032334921692, !- X,Y,Z ==> Vertex 2 {m} 36.129358000000,9.000000000000,1.032334921692, !- X,Y,Z ==> Vertex 3 {m} 36.129358000000,9.000000000000,2.50266; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_2_Pod_3_ZN_1_FLR_1_Wall_3_Window3, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Mult_Class_2_Pod_3_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 16.870316000000,9.000000000000,2.50266, !- X,Y,Z ==> Vertex 1 {m} 16.870316000000,9.000000000000,1.032334921692, !- X,Y,Z ==> Vertex 2 {m} 0.046281052104,9.000000000000,1.032334921692, !- X,Y,Z ==> Vertex 3 {m} 0.050000000000,9.000000000000,2.50266; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_2_Pod_3_ZN_1_FLR_1_Wall_3_Window2, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Mult_Class_2_Pod_3_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 34.910158000000,9.000000000000,2.50266, !- X,Y,Z ==> Vertex 1 {m} 34.910158000000,9.000000000000,1.032334921692, !- X,Y,Z ==> Vertex 2 {m} 18.089516000000,9.000000000000,1.032334921692, !- X,Y,Z ==> Vertex 3 {m} 18.089516000000,9.000000000000,2.50266; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, E0F1D7, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Mult_Class_2_Pod_3_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 35.964848810365,9.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 35.964848810365,9.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 35.050448810365,9.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 35.050448810365,9.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_2_Pod_3_ZN_1_FLR_1_Wall_3_Door2, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Mult_Class_2_Pod_3_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 17.937310775602,9.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 17.937310775602,9.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 17.022910775602,9.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 17.022910775602,9.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_2_Pod_3_ZN_1_FLR_1_Wall_3_Window1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_2_Pod_3_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 10.950000000000,9.000000000000,2.512845, !- X,Y,Z ==> Vertex 1 {m} 10.950000000000,9.000000000000,0.922073000000, !- X,Y,Z ==> Vertex 2 {m} 9.730800000000,9.000000000000,0.922073000000, !- X,Y,Z ==> Vertex 3 {m} 9.730800000000,9.000000000000,2.512845; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_2_Pod_3_ZN_1_FLR_1_Wall_3_Window2, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_2_Pod_3_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 8.511600000000,9.000000000000,2.512845, !- X,Y,Z ==> Vertex 1 {m} 8.511600000000,9.000000000000,0.922073000000, !- X,Y,Z ==> Vertex 2 {m} 0.050000000000,9.000000000000,0.922073000000, !- X,Y,Z ==> Vertex 3 {m} 0.050000000000,9.000000000000,2.512845; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_2_Pod_3_ZN_1_FLR_1_Wall_3_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Corner_Class_2_Pod_3_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 9.550785477926,9.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 9.550785477926,9.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 8.636385477926,9.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 8.636385477926,9.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_1_Pod_3_ZN_1_FLR_1_Wall_1_Window1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_1_Pod_3_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.050000000000,0.000000000000,2.512845, !- X,Y,Z ==> Vertex 1 {m} 0.050000000000,0.000000000000,0.922073000000, !- X,Y,Z ==> Vertex 2 {m} 1.269200000000,0.000000000000,0.922073000000, !- X,Y,Z ==> Vertex 3 {m} 1.269200000000,0.000000000000,2.512845; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_1_Pod_3_ZN_1_FLR_1_Wall_1_Window2, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_1_Pod_3_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 2.488400000000,0.000000000000,2.512845, !- X,Y,Z ==> Vertex 1 {m} 2.488400000000,0.000000000000,0.922073000000, !- X,Y,Z ==> Vertex 2 {m} 10.950000000000,0.000000000000,0.922073000000, !- X,Y,Z ==> Vertex 3 {m} 10.950000000000,0.000000000000,2.512845; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_1_Pod_3_ZN_1_FLR_1_Wall_1_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Corner_Class_1_Pod_3_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 1.398532467657,0.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 1.398532467657,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 2.312932467657,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 2.312932467657,0.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_1_Pod_3_ZN_1_FLR_1_Wall_1_Window1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Mult_Class_1_Pod_3_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.050000000000,0.000000000000,2.50266, !- X,Y,Z ==> Vertex 1 {m} 0.050000000000,0.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 2 {m} 16.870642000000,0.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 3 {m} 16.870642000000,0.000000000000,2.50266; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_1_Pod_3_ZN_1_FLR_1_Wall_1_Window2, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Mult_Class_1_Pod_3_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 18.089842000000,0.000000000000,2.50266, !- X,Y,Z ==> Vertex 1 {m} 18.089842000000,0.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 2 {m} 34.910484000000,0.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 3 {m} 34.910484000000,0.000000000000,2.50266; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_1_Pod_3_ZN_1_FLR_1_Wall_1_Window3, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Mult_Class_1_Pod_3_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 36.129684000000,0.000000000000,2.50266, !- X,Y,Z ==> Vertex 1 {m} 36.129684000000,0.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 2 {m} 52.950000000000,0.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 3 {m} 52.950000000000,0.000000000000,2.50266; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_1_Pod_3_ZN_1_FLR_1_Wall_1_Door1, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Mult_Class_1_Pod_3_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 17.013072523185,0.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 17.013072523185,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 17.927472523185,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 17.927472523185,0.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_1_Pod_3_ZN_1_FLR_1_Wall_1_Door2, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Mult_Class_1_Pod_3_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 35.082313839171,0.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 35.082313839171,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 35.996713839171,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 35.996713839171,0.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Main_Corridor_ZN_1_FLR_1_Wall_7_Window1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Main_Corridor_ZN_1_FLR_1_Wall_7, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000000000000,66.950000000000,2.507805, !- X,Y,Z ==> Vertex 1 {m} 0.000000000000,66.950000000000,0.997104600000, !- X,Y,Z ==> Vertex 2 {m} 0.000000000000,65.730800000000,0.997104600000, !- X,Y,Z ==> Vertex 3 {m} 0.000000000000,65.730800000000,2.507805; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Main_Corridor_ZN_1_FLR_1_Wall_7_Window2, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Main_Corridor_ZN_1_FLR_1_Wall_7, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000000000000,64.511600000000,2.507805, !- X,Y,Z ==> Vertex 1 {m} 0.000000000000,64.511600000000,0.997104600000, !- X,Y,Z ==> Vertex 2 {m} 0.000000000000,49.050000000000,0.997104600000, !- X,Y,Z ==> Vertex 3 {m} 0.000000000000,49.050000000000,2.507805; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Main_Corridor_ZN_1_FLR_1_Wall_7_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Main_Corridor_ZN_1_FLR_1_Wall_7, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 0.000000000000,65.619022120667,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 0.000000000000,65.619022120667,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 0.000000000000,64.704622120667,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 0.000000000000,64.704622120667,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_2_Pod_2_ZN_1_FLR_1_Wall_3_Window1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Mult_Class_2_Pod_2_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 52.950000000000,9.000000000000,2.50266, !- X,Y,Z ==> Vertex 1 {m} 52.950000000000,9.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 2 {m} 36.129358000000,9.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 3 {m} 36.129358000000,9.000000000000,2.50266; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_2_Pod_2_ZN_1_FLR_1_Wall_3_Window3, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Mult_Class_2_Pod_2_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 16.870316000000,9.000000000000,2.50266, !- X,Y,Z ==> Vertex 1 {m} 16.870316000000,9.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 2 {m} 0.050000000000,9.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 3 {m} 0.050000000000,9.000000000000,2.50266; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_2_Pod_2_ZN_1_FLR_1_Wall_3_Window2, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Mult_Class_2_Pod_2_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 34.910158000000,9.000000000000,2.50266, !- X,Y,Z ==> Vertex 1 {m} 34.910158000000,9.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 2 {m} 18.089516000000,9.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 3 {m} 18.089516000000,9.000000000000,2.50266; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_2_Pod_2_ZN_1_FLR_1_Wall_3_Door1, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Mult_Class_2_Pod_2_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 35.974093490326,9.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 35.974093490326,9.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 35.059693490326,9.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 35.059693490326,9.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_2_Pod_2_ZN_1_FLR_1_Wall_3_Door2, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Mult_Class_2_Pod_2_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 17.894566160676,9.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 17.894566160676,9.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 16.980166160676,9.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 16.980166160676,9.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_2_Pod_2_ZN_1_FLR_1_Wall_3_Window1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_2_Pod_2_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 10.950000000000,9.000000000000,2.512845, !- X,Y,Z ==> Vertex 1 {m} 10.950000000000,9.000000000000,0.922073000000, !- X,Y,Z ==> Vertex 2 {m} 9.730800000000,9.000000000000,0.922073000000, !- X,Y,Z ==> Vertex 3 {m} 9.730800000000,9.000000000000,2.512845; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_2_Pod_2_ZN_1_FLR_1_Wall_3_Window2, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_2_Pod_2_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 8.511600000000,9.000000000000,2.512845, !- X,Y,Z ==> Vertex 1 {m} 8.511600000000,9.000000000000,0.922073000000, !- X,Y,Z ==> Vertex 2 {m} 0.050000000000,9.000000000000,0.922073000000, !- X,Y,Z ==> Vertex 3 {m} 0.050000000000,9.000000000000,2.512845; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_2_Pod_2_ZN_1_FLR_1_Wall_3_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Corner_Class_2_Pod_2_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 9.568830848560,9.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 9.568830848560,9.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 8.654430848560,9.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 8.654430848560,9.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_1_Pod_2_ZN_1_FLR_1_Wall_1_Window1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_1_Pod_2_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.050000000000,0.000000000000,2.512845, !- X,Y,Z ==> Vertex 1 {m} 0.050000000000,0.000000000000,0.922073000000, !- X,Y,Z ==> Vertex 2 {m} 1.269200000000,0.000000000000,0.922073000000, !- X,Y,Z ==> Vertex 3 {m} 1.269200000000,0.000000000000,2.512845; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_1_Pod_2_ZN_1_FLR_1_Wall_1_Window2, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_1_Pod_2_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 2.488400000000,0.000000000000,2.512845, !- X,Y,Z ==> Vertex 1 {m} 2.488400000000,0.000000000000,0.922073000000, !- X,Y,Z ==> Vertex 2 {m} 10.950000000000,0.000000000000,0.922073000000, !- X,Y,Z ==> Vertex 3 {m} 10.950000000000,0.000000000000,2.512845; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_1_Pod_2_ZN_1_FLR_1_Wall_1_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Corner_Class_1_Pod_2_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 1.406916852331,0.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 1.406916852331,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 2.321316852331,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 2.321316852331,0.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_1_Pod_2_ZN_1_FLR_1_Wall_1_Window1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Mult_Class_1_Pod_2_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.050000000000,0.000000000000,2.50266, !- X,Y,Z ==> Vertex 1 {m} 0.050000000000,0.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 2 {m} 16.870642000000,0.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 3 {m} 16.870642000000,0.000000000000,2.50266; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_1_Pod_2_ZN_1_FLR_1_Wall_1_Window2, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Mult_Class_1_Pod_2_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 18.089842000000,0.000000000000,2.50266, !- X,Y,Z ==> Vertex 1 {m} 18.089842000000,0.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 2 {m} 34.910484000000,0.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 3 {m} 34.910484000000,0.000000000000,2.50266; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_1_Pod_2_ZN_1_FLR_1_Wall_1_Window3, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Mult_Class_1_Pod_2_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 36.129684000000,0.000000000000,2.50266, !- X,Y,Z ==> Vertex 1 {m} 36.129684000000,0.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 2 {m} 52.950000000000,0.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 3 {m} 52.950000000000,0.000000000000,2.50266; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_1_Pod_2_ZN_1_FLR_1_Wall_1_Door1, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Mult_Class_1_Pod_2_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 17.003699245889,0.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 17.003699245889,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 17.918099245889,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 17.918099245889,0.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_1_Pod_2_ZN_1_FLR_1_Wall_1_Door2, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Mult_Class_1_Pod_2_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 35.059394395452,0.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 35.059394395452,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 35.973794395452,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 35.973794395452,0.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Main_Corridor_ZN_1_FLR_1_Wall_11_Window1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Main_Corridor_ZN_1_FLR_1_Wall_11, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000000000000,25.950000000000,2.508295, !- X,Y,Z ==> Vertex 1 {m} 0.000000000000,25.950000000000,0.990500600000, !- X,Y,Z ==> Vertex 2 {m} 0.000000000000,24.730800000000,0.990500600000, !- X,Y,Z ==> Vertex 3 {m} 0.000000000000,24.730800000000,2.508295; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Main_Corridor_ZN_1_FLR_1_Wall_11_Window2, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Main_Corridor_ZN_1_FLR_1_Wall_11, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.000000000000,23.511600000000,2.508295, !- X,Y,Z ==> Vertex 1 {m} 0.000000000000,23.511600000000,0.990500600000, !- X,Y,Z ==> Vertex 2 {m} 0.000000000000,9.050000000000,0.990500600000, !- X,Y,Z ==> Vertex 3 {m} 0.000000000000,9.050000000000,2.508295; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Main_Corridor_ZN_1_FLR_1_Wall_11_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Main_Corridor_ZN_1_FLR_1_Wall_11, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 0.000000000000,24.548016522461,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 0.000000000000,24.548016522461,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 0.000000000000,23.633616522461,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 0.000000000000,23.633616522461,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_2_Pod_1_ZN_1_FLR_1_Wall_3_Window1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Mult_Class_2_Pod_1_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 52.950000000000,9.000000000000,2.50266, !- X,Y,Z ==> Vertex 1 {m} 52.950000000000,9.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 2 {m} 36.129358000000,9.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 3 {m} 36.129358000000,9.000000000000,2.50266; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_2_Pod_1_ZN_1_FLR_1_Wall_3_Window2, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Mult_Class_2_Pod_1_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 34.910158000000,9.000000000000,2.50266, !- X,Y,Z ==> Vertex 1 {m} 34.910158000000,9.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 2 {m} 18.089516000000,9.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 3 {m} 18.089516000000,9.000000000000,2.50266; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_2_Pod_1_ZN_1_FLR_1_Wall_3_Window3, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Mult_Class_2_Pod_1_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 16.870316000000,9.000000000000,2.50266, !- X,Y,Z ==> Vertex 1 {m} 16.870316000000,9.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 2 {m} 0.050000000000,9.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 3 {m} 0.050000000000,9.000000000000,2.50266; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_2_Pod_1_ZN_1_FLR_1_Wall_3_Door1, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Mult_Class_2_Pod_1_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 35.928864968800,9.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 35.928864968800,9.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 35.014464968800,9.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 35.014464968800,9.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_2_Pod_1_ZN_1_FLR_1_Wall_3_Door2, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Mult_Class_2_Pod_1_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 17.909611938943,9.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 17.909611938943,9.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 16.995211938943,9.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 16.995211938943,9.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_2_Pod_1_ZN_1_FLR_1_Wall_3_Window1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_2_Pod_1_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 10.950000000000,9.000000000000,2.512845, !- X,Y,Z ==> Vertex 1 {m} 10.952974650803,9.000000000000,0.922097867406, !- X,Y,Z ==> Vertex 2 {m} 9.730800000000,9.000000000000,0.922097867406, !- X,Y,Z ==> Vertex 3 {m} 9.730800000000,9.000000000000,2.512845; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_2_Pod_1_ZN_1_FLR_1_Wall_3_Window2, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_2_Pod_1_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 8.511600000000,9.000000000000,2.512845, !- X,Y,Z ==> Vertex 1 {m} 8.511600000000,9.000000000000,0.922097867406, !- X,Y,Z ==> Vertex 2 {m} 0.052974650803,9.000000000000,0.922097867406, !- X,Y,Z ==> Vertex 3 {m} 0.050000000000,9.000000000000,2.512845; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_2_Pod_1_ZN_1_FLR_1_Wall_3_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Corner_Class_2_Pod_1_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 9.534616307740,9.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 9.534616307740,9.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 8.620216307740,9.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 8.620216307740,9.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_1_Pod_1_ZN_1_FLR_1_Wall_1_Window2, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Corner_Class_1_Pod_1_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 2.488400000000,0.000000000000,2.512845, !- X,Y,Z ==> Vertex 1 {m} 2.488400000000,0.000000000000,0.922073000000, !- X,Y,Z ==> Vertex 2 {m} 10.950000000000,0.000000000000,0.922073000000, !- X,Y,Z ==> Vertex 3 {m} 10.950000000000,0.000000000000,2.512845; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Corner_Class_1_Pod_1_ZN_1_FLR_1_Wall_1_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Corner_Class_1_Pod_1_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 1.460560414014,0.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 1.460560414014,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 2.374960414014,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 2.374960414014,0.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_1_Pod_1_ZN_1_FLR_1_Wall_1_Window1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Mult_Class_1_Pod_1_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.050000000000,0.000000000000,2.50266, !- X,Y,Z ==> Vertex 1 {m} 0.050000000000,0.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 2 {m} 16.870642000000,0.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 3 {m} 16.870642000000,0.000000000000,2.50266; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_1_Pod_1_ZN_1_FLR_1_Wall_1_Window2, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Mult_Class_1_Pod_1_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 18.089842000000,0.000000000000,2.50266, !- X,Y,Z ==> Vertex 1 {m} 18.089842000000,0.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 2 {m} 34.910484000000,0.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 3 {m} 34.910484000000,0.000000000000,2.50266; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_1_Pod_1_ZN_1_FLR_1_Wall_1_Window3, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Mult_Class_1_Pod_1_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 36.129684000000,0.000000000000,2.50266, !- X,Y,Z ==> Vertex 1 {m} 36.129684000000,0.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 2 {m} 52.950000000000,0.000000000000,1.032232800000, !- X,Y,Z ==> Vertex 3 {m} 52.950000000000,0.000000000000,2.50266; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_1_Pod_1_ZN_1_FLR_1_Wall_1_Door1, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Mult_Class_1_Pod_1_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 17.046287185038,0.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 17.046287185038,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 17.960687185038,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 17.960687185038,0.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Mult_Class_1_Pod_1_ZN_1_FLR_1_Wall_1_Door2, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Mult_Class_1_Pod_1_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 35.078713404626,0.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 35.078713404626,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 35.993113404626,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 35.993113404626,0.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Lobby_ZN_1_FLR_1_Wall_1_Window1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Lobby_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.050000000000,0.000000000000,2.50938, !- X,Y,Z ==> Vertex 1 {m} 0.050000000000,0.000000000000,0.974397000000, !- X,Y,Z ==> Vertex 2 {m} 1.269200000000,0.000000000000,0.974397000000, !- X,Y,Z ==> Vertex 3 {m} 1.269200000000,0.000000000000,2.50938; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Lobby_ZN_1_FLR_1_Wall_1_Window2, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Lobby_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 2.488400000000,0.000000000000,2.50938, !- X,Y,Z ==> Vertex 1 {m} 2.488400000000,0.000000000000,0.974397000000, !- X,Y,Z ==> Vertex 2 {m} 14.950000000000,0.000000000000,0.974397000000, !- X,Y,Z ==> Vertex 3 {m} 14.950000000000,0.000000000000,2.50938; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Lobby_ZN_1_FLR_1_Wall_1_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Lobby_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 1.432569072681,0.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 1.432569072681,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 2.346969072681,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 2.346969072681,0.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Offices_ZN_1_FLR_1_Wall_1_Window1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Offices_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.050000000000,0.000000000000,2.50371, !- X,Y,Z ==> Vertex 1 {m} 0.050000000000,0.000000000000,1.003480000000, !- X,Y,Z ==> Vertex 2 {m} 11.870652000000,0.000000000000,1.003480000000, !- X,Y,Z ==> Vertex 3 {m} 11.870652000000,0.000000000000,2.50371; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Offices_ZN_1_FLR_1_Wall_1_Window2, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Offices_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 13.089852000000,0.000000000000,2.50371, !- X,Y,Z ==> Vertex 1 {m} 13.089852000000,0.000000000000,1.003480000000, !- X,Y,Z ==> Vertex 2 {m} 24.910504000000,0.000000000000,1.003480000000, !- X,Y,Z ==> Vertex 3 {m} 24.910504000000,0.000000000000,2.50371; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Offices_ZN_1_FLR_1_Wall_1_Window3, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Offices_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 26.129704000000,0.000000000000,2.50371, !- X,Y,Z ==> Vertex 1 {m} 26.129704000000,0.000000000000,1.003480000000, !- X,Y,Z ==> Vertex 2 {m} 37.950000000000,0.000000000000,1.003480000000, !- X,Y,Z ==> Vertex 3 {m} 37.950000000000,0.000000000000,2.50371; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Offices_ZN_1_FLR_1_Wall_1_Door1, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Offices_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 12.080590785063,0.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 12.080590785063,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 12.994990785063,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 12.994990785063,0.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Offices_ZN_1_FLR_1_Wall_1_Door2, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Offices_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 25.077901800907,0.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 25.077901800907,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 25.992301800907,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 25.992301800907,0.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_1_Wall_1_Door1, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Aux_Gym_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 5.724173020125,0.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 5.724173020125,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 6.638573020125,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 6.638573020125,0.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_1_Wall_1_Door2, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Aux_Gym_ZN_1_FLR_1_Wall_1, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 18.149921734850,0.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 18.149921734850,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 19.064321734850,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 19.064321734850,0.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_1_Wall_2_Door1, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Aux_Gym_ZN_1_FLR_1_Wall_2, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 24.000000000000,4.836663799402,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 24.000000000000,4.836663799402,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 24.000000000000,5.751063799402,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 24.000000000000,5.751063799402,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_1_Wall_2_Door2, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Aux_Gym_ZN_1_FLR_1_Wall_2, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 24.000000000000,23.526112987155,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 24.000000000000,23.526112987155,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 24.000000000000,24.440512987155,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 24.000000000000,24.440512987155,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Aux_Gym_ZN_1_FLR_1_Wall_2_Door3, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Aux_Gym_ZN_1_FLR_1_Wall_2, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 24.000000000000,42.724661090036,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 24.000000000000,42.724661090036,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 24.000000000000,43.639061090036,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 24.000000000000,43.639061090036,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Cafeteria_ZN_1_FLR_1_Wall_2_Window1, !- Name Window, !- Surface Type NonresWindow_U_0.35_SHGC_0.38, !- Construction Name!- Field 12 Cafeteria_ZN_1_FLR_1_Wall_2, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 24.000000000000,0.050000000000,2.50539, !- X,Y,Z ==> Vertex 1 {m} 24.000000000000,0.050000000000,1.030581800000, !- X,Y,Z ==> Vertex 2 {m} 24.000000000000,1.269200000000,1.030581800000, !- X,Y,Z ==> Vertex 3 {m} 24.000000000000,1.269200000000,2.50539; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Cafeteria_ZN_1_FLR_1_Wall_2_Door, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Cafeteria_ZN_1_FLR_1_Wall_2, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 24.000000000000,1.450055152782,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 24.000000000000,1.450055152782,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 24.000000000000,2.364455152782,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 24.000000000000,2.364455152782,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Auditorium_ZN_1_FLR_1_Wall_3_Door1, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Auditorium_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 34.697551052816,26.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 34.697551052816,26.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 33.783151052816,26.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 33.783151052816,26.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Auditorium_ZN_1_FLR_1_Wall_3_Door2, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Auditorium_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 21.001162625423,26.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 21.001162625423,26.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 20.086762625423,26.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 20.086762625423,26.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Auditorium_ZN_1_FLR_1_Wall_3_Door3, !- Name Door, !- Surface Type Swinging Door_con, !- Construction Name Auditorium_ZN_1_FLR_1_Wall_3, !- Building Surface Name , !- Outside Boundary Condition Object , !- View Factor to Ground , !- Frame and Divider Name , !- Multiplier 4, !- Number of Vertices 6.249245224883,26.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m} 6.249245224883,26.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} 5.334845224883,26.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} 5.334845224883,26.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m} !- =========== ALL OBJECTS IN CLASS: INTERNALMASS =========== InternalMass, Corner_Class_1_Pod_1_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Zone Name 198.0000; !- Surface Area {m2} InternalMass, Corner_Class_1_Pod_1_ZN_1_FLR_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Zone Name 198.0000; !- Surface Area {m2} InternalMass, Mult_Class_1_Pod_1_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Zone Name 954.0000; !- Surface Area {m2} InternalMass, Mult_Class_1_Pod_1_ZN_1_FLR_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Zone Name 954.0000; !- Surface Area {m2} InternalMass, Corridor_Pod_1_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corridor_Pod_1_ZN_1_FLR_1, !- Zone Name 640.0000; !- Surface Area {m2} InternalMass, Corridor_Pod_1_ZN_1_FLR_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corridor_Pod_1_ZN_1_FLR_2, !- Zone Name 640.0000; !- Surface Area {m2} InternalMass, Corner_Class_2_Pod_1_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Zone Name 198.0000; !- Surface Area {m2} InternalMass, Corner_Class_2_Pod_1_ZN_1_FLR_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Zone Name 198.0000; !- Surface Area {m2} InternalMass, Mult_Class_2_Pod_1_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Zone Name 954.0000; !- Surface Area {m2} InternalMass, Mult_Class_2_Pod_1_ZN_1_FLR_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Zone Name 954.0000; !- Surface Area {m2} InternalMass, Corner_Class_1_Pod_2_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Zone Name 198.0000; !- Surface Area {m2} InternalMass, Corner_Class_1_Pod_2_ZN_1_FLR_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Zone Name 198.0000; !- Surface Area {m2} InternalMass, Mult_Class_1_Pod_2_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Zone Name 954.0000; !- Surface Area {m2} InternalMass, Mult_Class_1_Pod_2_ZN_1_FLR_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Zone Name 954.0000; !- Surface Area {m2} InternalMass, Corridor_Pod_2_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corridor_Pod_2_ZN_1_FLR_1, !- Zone Name 640.0000; !- Surface Area {m2} InternalMass, Corridor_Pod_2_ZN_1_FLR_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corridor_Pod_2_ZN_1_FLR_2, !- Zone Name 640.0000; !- Surface Area {m2} InternalMass, Corner_Class_2_Pod_2_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Zone Name 198.0000; !- Surface Area {m2} InternalMass, Corner_Class_2_Pod_2_ZN_1_FLR_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Zone Name 198.0000; !- Surface Area {m2} InternalMass, Mult_Class_2_Pod_2_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Zone Name 954.0000; !- Surface Area {m2} InternalMass, Mult_Class_2_Pod_2_ZN_1_FLR_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Zone Name 954.0000; !- Surface Area {m2} InternalMass, Corner_Class_1_Pod_3_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Zone Name 198.0000; !- Surface Area {m2} InternalMass, Corner_Class_1_Pod_3_ZN_1_FLR_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Zone Name 198.0000; !- Surface Area {m2} InternalMass, Mult_Class_1_Pod_3_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Zone Name 954.0000; !- Surface Area {m2} InternalMass, Mult_Class_1_Pod_3_ZN_1_FLR_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Zone Name 954.0000; !- Surface Area {m2} InternalMass, Corridor_Pod_3_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corridor_Pod_3_ZN_1_FLR_1, !- Zone Name 640.0000; !- Surface Area {m2} InternalMass, Corridor_Pod_3_ZN_1_FLR_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corridor_Pod_3_ZN_1_FLR_2, !- Zone Name 640.0000; !- Surface Area {m2} InternalMass, Corner_Class_2_Pod_3_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Zone Name 198.0000; !- Surface Area {m2} InternalMass, Corner_Class_2_Pod_3_ZN_1_FLR_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Zone Name 198.0000; !- Surface Area {m2} InternalMass, Mult_Class_2_Pod_3_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Zone Name 954.0000; !- Surface Area {m2} InternalMass, Mult_Class_2_Pod_3_ZN_1_FLR_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Zone Name 954.0000; !- Surface Area {m2} InternalMass, Main_Corridor_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Main_Corridor_ZN_1_FLR_1,!- Zone Name 2280.0000; !- Surface Area {m2} InternalMass, Main_Corridor_ZN_1_FLR_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Main_Corridor_ZN_1_FLR_2,!- Zone Name 2280.0000; !- Surface Area {m2} InternalMass, Lobby_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Lobby_ZN_1_FLR_1, !- Zone Name 420.0000; !- Surface Area {m2} InternalMass, Lobby_ZN_1_FLR_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Lobby_ZN_1_FLR_2, !- Zone Name 420.0000; !- Surface Area {m2} InternalMass, Bathrooms_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Bathrooms_ZN_1_FLR_1, !- Zone Name 420.0000; !- Surface Area {m2} InternalMass, Bathrooms_ZN_1_FLR_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Bathrooms_ZN_1_FLR_2, !- Zone Name 420.0000; !- Surface Area {m2} InternalMass, Offices_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Offices_ZN_1_FLR_1, !- Zone Name 1064.0000; !- Surface Area {m2} InternalMass, Offices_ZN_1_FLR_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Offices_ZN_1_FLR_2, !- Zone Name 1064.0000; !- Surface Area {m2} InternalMass, Gym_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Gym_ZN_1_FLR_1, !- Zone Name 3952.0000; !- Surface Area {m2} InternalMass, Aux_Gym_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Aux_Gym_ZN_1_FLR_1, !- Zone Name 2496.0000; !- Surface Area {m2} InternalMass, Auditorium_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Auditorium_ZN_1_FLR_1, !- Zone Name 1976.0000; !- Surface Area {m2} InternalMass, Kitchen_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Kitchen_ZN_1_FLR_1, !- Zone Name 432.0000; !- Surface Area {m2} InternalMass, LIBRARY_MEDIA_CENTER_ZN_1_FLR_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Zone Name 1680.0000; !- Surface Area {m2} InternalMass, Cafeteria_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Cafeteria_ZN_1_FLR_1, !- Zone Name 1248.0000; !- Surface Area {m2} InternalMass, Mech_ZN_1_FLR_1_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Mech_ZN_1_FLR_1, !- Zone Name 684.0000; !- Surface Area {m2} InternalMass, Mech_ZN_1_FLR_2_InternalMass_1, !- Name InteriorFurnishings, !- Construction Name Mech_ZN_1_FLR_2, !- Zone Name 684.0000; !- Surface Area {m2} !- =========== ALL OBJECTS IN CLASS: PEOPLE =========== People, Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 2.654, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 2.654, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 2.654, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 2.654, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Corridor_Pod_1_ZN_1_FLR_1, !- Name Corridor_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Corridor_Pod_1_ZN_1_FLR_2, !- Name Corridor_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 2.654, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 2.654, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 2.654, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 2.654, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 2.654, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 2.654, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 2.654, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 2.654, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Corridor_Pod_2_ZN_1_FLR_1, !- Name Corridor_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Corridor_Pod_2_ZN_1_FLR_2, !- Name Corridor_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 2.654, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 2.654, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 2.654, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 2.654, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 2.654, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 2.654, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 2.654, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_OCC_SCH_Extend, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 2.654, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Corridor_Pod_3_ZN_1_FLR_1, !- Name Corridor_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Corridor_Pod_3_ZN_1_FLR_2, !- Name Corridor_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 2.654, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 2.654, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 2.654, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_OCC_SCH_Extend, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 2.654, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Bathrooms_ZN_1_FLR_1, !- Name Bathrooms_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Bathrooms_ZN_1_FLR_2, !- Name Bathrooms_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Offices_ZN_1_FLR_1, !- Name Offices_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_OCC_SCH_Offices_w_SB, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 18.579, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Offices_ZN_1_FLR_2, !- Name Offices_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_OCC_SCH_Offices_w_SB, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 18.579, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Gym_ZN_1_FLR_1, !- Name Gym_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_OCC_SCH_Gym, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 3.096, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Aux_Gym_ZN_1_FLR_1, !- Name Aux_Gym_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_OCC_SCH_Gym, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 3.096, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Auditorium_ZN_1_FLR_1, !- Name Auditorium_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_OCC_SCH_Auditorium, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 0.619, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Kitchen_ZN_1_FLR_1, !- Name Kitchen_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method 35, !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 9.289, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Cafeteria_ZN_1_FLR_1, !- Name Cafeteria_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_OCC_SCH_Cafeteria, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} 0.929, !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Mech_ZN_1_FLR_1, !- Name Mech_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Mech_ZN_1_FLR_2, !- Name Mech_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_OCC_SCH, !- Number of People Schedule Name People, !- Number of People Calculation Method , !- Number of People , !- People per Zone Floor Area {person/m2} , !- Zone Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type !- =========== ALL OBJECTS IN CLASS: LIGHTS =========== Lights, Corner_Class_1_Pod_1_ZN_1_FLR_1_Lights, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_LIGHT_CLASSROOM_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Corner_Class_1_Pod_1_ZN_1_FLR_2_Lights, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_LIGHT_CLASSROOM_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Mult_Class_1_Pod_1_ZN_1_FLR_1_Lights, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_LIGHT_CLASSROOM_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Mult_Class_1_Pod_1_ZN_1_FLR_2_Lights, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_LIGHT_CLASSROOM_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Corridor_Pod_1_ZN_1_FLR_1_Lights, !- Name Corridor_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_LIGHT_CORRIDOR_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 4.413203271,!- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Corridor_Pod_1_ZN_1_FLR_2_Lights, !- Name Corridor_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_LIGHT_CORRIDOR_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 4.413203271,!- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Corner_Class_2_Pod_1_ZN_1_FLR_1_Lights, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_LIGHT_CLASSROOM_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Corner_Class_2_Pod_1_ZN_1_FLR_2_Lights, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_LIGHT_CLASSROOM_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Mult_Class_2_Pod_1_ZN_1_FLR_1_Lights, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_LIGHT_CLASSROOM_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Mult_Class_2_Pod_1_ZN_1_FLR_2_Lights, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_LIGHT_CLASSROOM_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Corner_Class_1_Pod_2_ZN_1_FLR_1_Lights, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_LIGHT_CLASSROOM_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Corner_Class_1_Pod_2_ZN_1_FLR_2_Lights, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_LIGHT_CLASSROOM_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Mult_Class_1_Pod_2_ZN_1_FLR_1_Lights, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_LIGHT_CLASSROOM_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Mult_Class_1_Pod_2_ZN_1_FLR_2_Lights, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_LIGHT_CLASSROOM_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Corridor_Pod_2_ZN_1_FLR_1_Lights, !- Name Corridor_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_LIGHT_CORRIDOR_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 4.413203271,!- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Corridor_Pod_2_ZN_1_FLR_2_Lights, !- Name Corridor_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_LIGHT_CORRIDOR_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 4.413203271,!- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Corner_Class_2_Pod_2_ZN_1_FLR_1_Lights, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_LIGHT_CLASSROOM_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Corner_Class_2_Pod_2_ZN_1_FLR_2_Lights, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_LIGHT_CLASSROOM_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Mult_Class_2_Pod_2_ZN_1_FLR_1_Lights, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_LIGHT_CLASSROOM_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Mult_Class_2_Pod_2_ZN_1_FLR_2_Lights, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_LIGHT_CLASSROOM_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Corner_Class_1_Pod_3_ZN_1_FLR_1_Lights, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_LIGHT_CLASSROOM_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Corner_Class_1_Pod_3_ZN_1_FLR_2_Lights, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_LIGHT_CLASSROOM_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Mult_Class_1_Pod_3_ZN_1_FLR_1_Lights, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_LIGHT_CLASSROOM_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Mult_Class_1_Pod_3_ZN_1_FLR_2_Lights, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_LIGHT_CLASSROOM_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Corridor_Pod_3_ZN_1_FLR_1_Lights, !- Name Corridor_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_LIGHT_CORRIDOR_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 4.413203271,!- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Corridor_Pod_3_ZN_1_FLR_2_Lights, !- Name Corridor_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_LIGHT_CORRIDOR_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 4.413203271,!- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Corner_Class_2_Pod_3_ZN_1_FLR_1_Lights, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_LIGHT_CLASSROOM_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Corner_Class_2_Pod_3_ZN_1_FLR_2_Lights, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_LIGHT_CLASSROOM_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Mult_Class_2_Pod_3_ZN_1_FLR_1_Lights, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_LIGHT_CLASSROOM_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Mult_Class_2_Pod_3_ZN_1_FLR_2_Lights, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_LIGHT_CLASSROOM_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.642376396, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Main_Corridor_ZN_1_FLR_1_Lights, !- Name Main_Corridor_ZN_1_FLR_1,!- Zone or ZoneList Name BLDG_LIGHT_CORRIDOR_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 4.413203271,!- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Main_Corridor_ZN_1_FLR_2_Lights, !- Name Main_Corridor_ZN_1_FLR_2,!- Zone or ZoneList Name BLDG_LIGHT_CORRIDOR_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 4.413203271,!- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Lobby_ZN_1_FLR_1_Lights, !- Name Lobby_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_LIGHT_LOBBYFLR1_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 9.04168475, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Lobby_ZN_1_FLR_2_Lights, !- Name Lobby_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_LIGHT_LOBBYFLR1_SCH,!- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 9.04168475, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Bathrooms_ZN_1_FLR_1_Lights, !- Name Bathrooms_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_LIGHT_BATH_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.781263563, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Bathrooms_ZN_1_FLR_2_Lights, !- Name Bathrooms_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_LIGHT_BATH_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.781263563, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Offices_ZN_1_FLR_1_Lights, !- Name Offices_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_LIGHT_OFFICE_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.965293709, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Offices_ZN_1_FLR_2_Lights, !- Name Offices_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_LIGHT_OFFICE_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 7.965293709, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Gym_ZN_1_FLR_1_Lights, !- Name Gym_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_LIGHT_GYM_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 9.687519375, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Aux_Gym_ZN_1_FLR_1_Lights, !- Name Aux_Gym_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_LIGHT_GYM_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 9.687519375, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Auditorium_ZN_1_FLR_1_Lights, !- Name Auditorium_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_LIGHT_MISC_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 6.565985354, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Kitchen_ZN_1_FLR_1_Lights, !- Name Kitchen_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_LIGHT_MISC_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 11.73266235, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, LIBRARY_MEDIA_CENTER_ZN_1_FLR_2_Lights, !- Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_LIGHT_LIBRARY_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 8.934045646, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Cafeteria_ZN_1_FLR_1_Lights, !- Name Cafeteria_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_LIGHT_MISC_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 4.305564167, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Mech_ZN_1_FLR_1_Lights, !- Name Mech_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_LIGHT_MECHANIC_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 10.2257149, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Mech_ZN_1_FLR_2_Lights, !- Name Mech_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_LIGHT_MECHANIC_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 10.2257149, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Return Air Fraction 0.3700, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable LightsWired, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature !- =========== ALL OBJECTS IN CLASS: ELECTRICEQUIPMENT =========== ElectricEquipment, Corner_Class_1_Pod_1_ZN_1_FLR_1_PlugMisc_Equip, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 990.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Corner_Class_1_Pod_1_ZN_1_FLR_2_PlugMisc_Equip, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 990.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Mult_Class_1_Pod_1_ZN_1_FLR_1_PlugMisc_Equip, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 4770.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Mult_Class_1_Pod_1_ZN_1_FLR_2_PlugMisc_Equip, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 4770.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Corridor_Pod_1_ZN_1_FLR_1_PlugMisc_Equip, !- Name Corridor_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1280.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Corridor_Pod_1_ZN_1_FLR_2_PlugMisc_Equip, !- Name Corridor_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1280.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Corner_Class_2_Pod_1_ZN_1_FLR_1_PlugMisc_Equip, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 990.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Corner_Class_2_Pod_1_ZN_1_FLR_2_PlugMisc_Equip, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 990.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Mult_Class_2_Pod_1_ZN_1_FLR_1_PlugMisc_Equip, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 4770.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Mult_Class_2_Pod_1_ZN_1_FLR_2_PlugMisc_Equip, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 4770.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Corner_Class_1_Pod_2_ZN_1_FLR_1_PlugMisc_Equip, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 990.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Corner_Class_1_Pod_2_ZN_1_FLR_2_PlugMisc_Equip, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 990.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Mult_Class_1_Pod_2_ZN_1_FLR_1_PlugMisc_Equip, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 4770.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Mult_Class_1_Pod_2_ZN_1_FLR_2_PlugMisc_Equip, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 4770.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Corridor_Pod_2_ZN_1_FLR_1_PlugMisc_Equip, !- Name Corridor_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1280.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Corridor_Pod_2_ZN_1_FLR_2_PlugMisc_Equip, !- Name Corridor_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1280.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Corner_Class_2_Pod_2_ZN_1_FLR_1_PlugMisc_Equip, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 990.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Corner_Class_2_Pod_2_ZN_1_FLR_2_PlugMisc_Equip, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 990.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Mult_Class_2_Pod_2_ZN_1_FLR_1_PlugMisc_Equip, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 4770.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Mult_Class_2_Pod_2_ZN_1_FLR_2_PlugMisc_Equip, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 4770.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Corner_Class_1_Pod_3_ZN_1_FLR_1_PlugMisc_Equip, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 990.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Corner_Class_1_Pod_3_ZN_1_FLR_2_PlugMisc_Equip, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 990.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Mult_Class_1_Pod_3_ZN_1_FLR_1_PlugMisc_Equip, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 4770.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Mult_Class_1_Pod_3_ZN_1_FLR_2_PlugMisc_Equip, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 9540.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Corridor_Pod_3_ZN_1_FLR_1_PlugMisc_Equip, !- Name Corridor_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1280.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Corridor_Pod_3_ZN_1_FLR_2_PlugMisc_Equip, !- Name Corridor_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1280.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Corner_Class_2_Pod_3_ZN_1_FLR_1_PlugMisc_Equip, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 990.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Corner_Class_2_Pod_3_ZN_1_FLR_2_PlugMisc_Equip, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 990.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Mult_Class_2_Pod_3_ZN_1_FLR_1_PlugMisc_Equip, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 4770.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Mult_Class_2_Pod_3_ZN_1_FLR_2_PlugMisc_Equip, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 9540.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Main_Corridor_ZN_1_FLR_1_PlugMisc_Equip, !- Name Main_Corridor_ZN_1_FLR_1,!- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 4560.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Main_Corridor_ZN_1_FLR_2_PlugMisc_Equip, !- Name Main_Corridor_ZN_1_FLR_2,!- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 4560.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Lobby_ZN_1_FLR_1_PlugMisc_Equip, !- Name Lobby_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 840.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Lobby_ZN_1_FLR_2_PlugMisc_Equip, !- Name Lobby_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 840.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Bathrooms_ZN_1_FLR_1_PlugMisc_Equip, !- Name Bathrooms_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 840.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Bathrooms_ZN_1_FLR_2_PlugMisc_Equip, !- Name Bathrooms_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 840.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Offices_ZN_1_FLR_1_PlugMisc_Equip, !- Name Offices_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 5745.6000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Offices_ZN_1_FLR_2_PlugMisc_Equip, !- Name Offices_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 5745.6000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Gym_ZN_1_FLR_1_PlugMisc_Equip, !- Name Gym_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 9880.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Aux_Gym_ZN_1_FLR_1_PlugMisc_Equip, !- Name Aux_Gym_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 6240.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Auditorium_ZN_1_FLR_1_PlugMisc_Equip, !- Name Auditorium_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 4940.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Kitchen_ZN_1_FLR_1_MiscElec_Equip, !- Name Kitchen_ZN_1_FLR_1, !- Zone or ZoneList Name KITCHEN_ELEC_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 47995.2, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.2500, !- Fraction Latent 0.3000, !- Fraction Radiant 0.2000, !- Fraction Lost Cooking; !- End-Use Subcategory ElectricEquipment, Kitchen_ZN_1_FLR_1_Reach-in-Freezer, !- Name Kitchen_ZN_1_FLR_1, !- Zone or ZoneList Name Always_on, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 555, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.2500, !- Fraction Radiant 0.0000, !- Fraction Lost ReachInFreezer; !- End-Use Subcategory ElectricEquipment, Kitchen_ZN_1_FLR_1_Reach-in-Refrigerator, !- Name Kitchen_ZN_1_FLR_1, !- Zone or ZoneList Name Always_on, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 313.3, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.2500, !- Fraction Radiant 0.0000, !- Fraction Lost ReachInRefrigerator; !- End-Use Subcategory ElectricEquipment, LIBRARY_MEDIA_CENTER_ZN_1_FLR_2_PlugMisc_Equip, !- Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 8400.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Cafeteria_ZN_1_FLR_1_PlugMisc_Equip, !- Name Cafeteria_ZN_1_FLR_1, !- Zone or ZoneList Name KITCHEN_ELEC_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 48004.32, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost Cooking; !- End-Use Subcategory ElectricEquipment, Mech_ZN_1_FLR_1_PlugMisc_Equip, !- Name Mech_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1368.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Mech_ZN_1_FLR_2_PlugMisc_Equip, !- Name Mech_ZN_1_FLR_2, !- Zone or ZoneList Name BLDG_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 1368.0000, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost MiscPlug; !- End-Use Subcategory ElectricEquipment, Mech_ZN_1_FLR_1_Elevators_Equip, !- Name Mech_ZN_1_FLR_1, !- Zone or ZoneList Name BLDG_ELEVATORS, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 32109.8901098901, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost ElevatorLift; !- End-Use Subcategory ElectricEquipment, Mech_ZN_1_FLR_1_Elevators_Lights_Fan, !- Name Mech_ZN_1_FLR_1, !- Zone or ZoneList Name ELEV_LIGHT_FAN_SCH_ADD_DF, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 125, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost ElevatorLightsFan; !- End-Use Subcategory !- =========== ALL OBJECTS IN CLASS: GASEQUIPMENT =========== GasEquipment, Kitchen_ZN_1_FLR_1_MiscGas_Equip, !- Name Kitchen_ZN_1_FLR_1, !- Zone or ZoneList Name KITCHEN_GAS_EQUIP_SCH, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 362577.6, !- Design Level {W} , !- Power per Zone Floor Area {W/m2} , !- Power per Person {W/person} 0.1000, !- Fraction Latent 0.2000, !- Fraction Radiant 0.7000, !- Fraction Lost , !- Carbon Dioxide Generation Rate {m3/s-W} Cooking; !- End-Use Subcategory !- =========== ALL OBJECTS IN CLASS: DAYLIGHTING:DETAILED =========== Daylighting:Controls, Gym_ZN_1_FLR_1_DaylCtrl, !- Name Gym_ZN_1_FLR_1, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Gym_ZN_1_FLR_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Gym_ZN_1_FLR_1_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.5, !- Fraction of Zone Controlled by Reference Point 1 538, !- Illuminance Setpoint at Reference Point 1 {lux} Gym_ZN_1_FLR_1_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.5, !- Fraction of Zone Controlled by Reference Point 2 538; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Gym_ZN_1_FLR_1_DaylRefPt1, !- Name Gym_ZN_1_FLR_1, !- Zone Name 19.0000, !- X-Coordinate of Reference Point {m} 24, !- Y-Coordinate of Reference Point {m} 0; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Gym_ZN_1_FLR_1_DaylRefPt2, !- Name Gym_ZN_1_FLR_1, !- Zone Name 2, !- X-Coordinate of Reference Point {m} 24, !- Y-Coordinate of Reference Point {m} 0; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Aux_Gym_ZN_1_FLR_1_DaylCtrl, !- Name Aux_Gym_ZN_1_FLR_1, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Aux_Gym_ZN_1_FLR_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Aux_Gym_ZN_1_FLR_1_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.5, !- Fraction of Zone Controlled by Reference Point 1 538, !- Illuminance Setpoint at Reference Point 1 {lux} Aux_Gym_ZN_1_FLR_1_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.5, !- Fraction of Zone Controlled by Reference Point 2 538; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Aux_Gym_ZN_1_FLR_1_DaylRefPt1, !- Name Aux_Gym_ZN_1_FLR_1, !- Zone Name 12.0000, !- X-Coordinate of Reference Point {m} 24, !- Y-Coordinate of Reference Point {m} 0; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Aux_Gym_ZN_1_FLR_1_DaylRefPt2, !- Name Aux_Gym_ZN_1_FLR_1, !- Zone Name 2, !- X-Coordinate of Reference Point {m} 24, !- Y-Coordinate of Reference Point {m} 0; !- Z-Coordinate of Reference Point {m} !- =========== ALL OBJECTS IN CLASS: DAYLIGHTING:CONTROLS =========== Daylighting:Controls, Corner_Class_1_Pod_1_ZN_1_FLR_1_DaylCtrl, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Corner_Class_1_Pod_1_ZN_1_FLR_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Corner_Class_1_Pod_1_ZN_1_FLR_1_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.56, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Corner_Class_1_Pod_1_ZN_1_FLR_1_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.2, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Corner_Class_1_Pod_1_ZN_1_FLR_1_DaylRefPt1, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Zone Name 7.619800, !- X-Coordinate of Reference Point {m} 3.371100, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Corner_Class_1_Pod_1_ZN_1_FLR_1_DaylRefPt2, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Zone Name 3.371100, !- X-Coordinate of Reference Point {m} 6.031300, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Mult_Class_1_Pod_1_ZN_1_FLR_1_DaylCtrl, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Mult_Class_1_Pod_1_ZN_1_FLR_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Mult_Class_1_Pod_1_ZN_1_FLR_1_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.28, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Mult_Class_1_Pod_1_ZN_1_FLR_1_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.28, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Mult_Class_1_Pod_1_ZN_1_FLR_1_DaylRefPt1, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Zone Name 26.500000, !- X-Coordinate of Reference Point {m} 1.676400, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Mult_Class_1_Pod_1_ZN_1_FLR_1_DaylRefPt2, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Zone Name 26.500000, !- X-Coordinate of Reference Point {m} 3.352800, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Corner_Class_2_Pod_1_ZN_1_FLR_1_DaylCtrl, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Corner_Class_2_Pod_1_ZN_1_FLR_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 270.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Corner_Class_2_Pod_1_ZN_1_FLR_1_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.56, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Corner_Class_2_Pod_1_ZN_1_FLR_1_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.2, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Corner_Class_2_Pod_1_ZN_1_FLR_1_DaylRefPt1, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Zone Name 7.372900, !- X-Coordinate of Reference Point {m} 5.628900, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Corner_Class_2_Pod_1_ZN_1_FLR_1_DaylRefPt2, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Zone Name 3.371100, !- X-Coordinate of Reference Point {m} 2.968800, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Mult_Class_2_Pod_1_ZN_1_FLR_1_DaylCtrl, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Mult_Class_2_Pod_1_ZN_1_FLR_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Mult_Class_2_Pod_1_ZN_1_FLR_1_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.28, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Mult_Class_2_Pod_1_ZN_1_FLR_1_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.28, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Mult_Class_2_Pod_1_ZN_1_FLR_1_DaylRefPt1, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Zone Name 26.500000, !- X-Coordinate of Reference Point {m} 7.323600, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Mult_Class_2_Pod_1_ZN_1_FLR_1_DaylRefPt2, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Zone Name 26.500000, !- X-Coordinate of Reference Point {m} 5.647200, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Corner_Class_1_Pod_1_ZN_1_FLR_2_DaylCtrl, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Corner_Class_1_Pod_1_ZN_1_FLR_2_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Corner_Class_1_Pod_1_ZN_1_FLR_2_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.56, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Corner_Class_1_Pod_1_ZN_1_FLR_2_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.2, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Corner_Class_1_Pod_1_ZN_1_FLR_2_DaylRefPt1, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Zone Name 7.619800, !- X-Coordinate of Reference Point {m} 3.371100, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Corner_Class_1_Pod_1_ZN_1_FLR_2_DaylRefPt2, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Zone Name 3.371100, !- X-Coordinate of Reference Point {m} 6.031300, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Mult_Class_1_Pod_1_ZN_1_FLR_2_DaylCtrl, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Mult_Class_1_Pod_1_ZN_1_FLR_2_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Mult_Class_1_Pod_1_ZN_1_FLR_2_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.28, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Mult_Class_1_Pod_1_ZN_1_FLR_2_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.28, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Mult_Class_1_Pod_1_ZN_1_FLR_2_DaylRefPt1, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Zone Name 26.500000, !- X-Coordinate of Reference Point {m} 1.676400, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Mult_Class_1_Pod_1_ZN_1_FLR_2_DaylRefPt2, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Zone Name 26.500000, !- X-Coordinate of Reference Point {m} 3.352800, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Corner_Class_2_Pod_1_ZN_1_FLR_2_DaylCtrl, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Corner_Class_2_Pod_1_ZN_1_FLR_2_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 270.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Corner_Class_2_Pod_1_ZN_1_FLR_2_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.56, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Corner_Class_2_Pod_1_ZN_1_FLR_2_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.2, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Corner_Class_2_Pod_1_ZN_1_FLR_2_DaylRefPt1, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Zone Name 7.372900, !- X-Coordinate of Reference Point {m} 5.628900, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Corner_Class_2_Pod_1_ZN_1_FLR_2_DaylRefPt2, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Zone Name 3.371100, !- X-Coordinate of Reference Point {m} 2.968800, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Mult_Class_2_Pod_1_ZN_1_FLR_2_DaylCtrl, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Mult_Class_2_Pod_1_ZN_1_FLR_2_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Mult_Class_2_Pod_1_ZN_1_FLR_2_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.28, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Mult_Class_2_Pod_1_ZN_1_FLR_2_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.28, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Mult_Class_2_Pod_1_ZN_1_FLR_2_DaylRefPt1, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Zone Name 26.500000, !- X-Coordinate of Reference Point {m} 7.323600, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Mult_Class_2_Pod_1_ZN_1_FLR_2_DaylRefPt2, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Zone Name 26.500000, !- X-Coordinate of Reference Point {m} 5.647200, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Corner_Class_1_Pod_2_ZN_1_FLR_1_DaylCtrl, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Corner_Class_1_Pod_2_ZN_1_FLR_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Corner_Class_1_Pod_2_ZN_1_FLR_1_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.56, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Corner_Class_1_Pod_2_ZN_1_FLR_1_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.2, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Corner_Class_1_Pod_2_ZN_1_FLR_1_DaylRefPt1, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Zone Name 7.619800, !- X-Coordinate of Reference Point {m} 3.371100, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Corner_Class_1_Pod_2_ZN_1_FLR_1_DaylRefPt2, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Zone Name 3.371100, !- X-Coordinate of Reference Point {m} 6.031300, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Mult_Class_1_Pod_2_ZN_1_FLR_1_DaylCtrl, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Mult_Class_1_Pod_2_ZN_1_FLR_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Mult_Class_1_Pod_2_ZN_1_FLR_1_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.28, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Mult_Class_1_Pod_2_ZN_1_FLR_1_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.28, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Mult_Class_1_Pod_2_ZN_1_FLR_1_DaylRefPt1, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Zone Name 26.500000, !- X-Coordinate of Reference Point {m} 1.676400, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Mult_Class_1_Pod_2_ZN_1_FLR_1_DaylRefPt2, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Zone Name 26.500000, !- X-Coordinate of Reference Point {m} 3.352800, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Corner_Class_2_Pod_2_ZN_1_FLR_1_DaylCtrl, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Corner_Class_2_Pod_2_ZN_1_FLR_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 270.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Corner_Class_2_Pod_2_ZN_1_FLR_1_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.56, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Corner_Class_2_Pod_2_ZN_1_FLR_1_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.2, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Corner_Class_2_Pod_2_ZN_1_FLR_1_DaylRefPt1, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Zone Name 7.372900, !- X-Coordinate of Reference Point {m} 5.628900, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Corner_Class_2_Pod_2_ZN_1_FLR_1_DaylRefPt2, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Zone Name 3.371100, !- X-Coordinate of Reference Point {m} 2.968800, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Mult_Class_2_Pod_2_ZN_1_FLR_1_DaylCtrl, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Mult_Class_2_Pod_2_ZN_1_FLR_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Mult_Class_2_Pod_2_ZN_1_FLR_1_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.28, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Mult_Class_2_Pod_2_ZN_1_FLR_1_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.28, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Mult_Class_2_Pod_2_ZN_1_FLR_1_DaylRefPt1, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Zone Name 26.500000, !- X-Coordinate of Reference Point {m} 7.323600, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Mult_Class_2_Pod_2_ZN_1_FLR_1_DaylRefPt2, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Zone Name 26.500000, !- X-Coordinate of Reference Point {m} 5.647200, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Corner_Class_1_Pod_2_ZN_1_FLR_2_DaylCtrl, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Corner_Class_1_Pod_2_ZN_1_FLR_2_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Corner_Class_1_Pod_2_ZN_1_FLR_2_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.56, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Corner_Class_1_Pod_2_ZN_1_FLR_2_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.2, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Corner_Class_1_Pod_2_ZN_1_FLR_2_DaylRefPt1, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Zone Name 7.619800, !- X-Coordinate of Reference Point {m} 3.371100, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Corner_Class_1_Pod_2_ZN_1_FLR_2_DaylRefPt2, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Zone Name 3.371100, !- X-Coordinate of Reference Point {m} 6.031300, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Mult_Class_1_Pod_2_ZN_1_FLR_2_DaylCtrl, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Mult_Class_1_Pod_2_ZN_1_FLR_2_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Mult_Class_1_Pod_2_ZN_1_FLR_2_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.28, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Mult_Class_1_Pod_2_ZN_1_FLR_2_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.28, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Mult_Class_1_Pod_2_ZN_1_FLR_2_DaylRefPt1, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Zone Name 26.500000, !- X-Coordinate of Reference Point {m} 1.676400, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Mult_Class_1_Pod_2_ZN_1_FLR_2_DaylRefPt2, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Zone Name 26.500000, !- X-Coordinate of Reference Point {m} 3.352800, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Corner_Class_2_Pod_2_ZN_1_FLR_2_DaylCtrl, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Corner_Class_2_Pod_2_ZN_1_FLR_2_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 270.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Corner_Class_2_Pod_2_ZN_1_FLR_2_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.56, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Corner_Class_2_Pod_2_ZN_1_FLR_2_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.2, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Corner_Class_2_Pod_2_ZN_1_FLR_2_DaylRefPt1, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Zone Name 7.372900, !- X-Coordinate of Reference Point {m} 5.628900, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Corner_Class_2_Pod_2_ZN_1_FLR_2_DaylRefPt2, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Zone Name 3.371100, !- X-Coordinate of Reference Point {m} 2.968800, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Mult_Class_2_Pod_2_ZN_1_FLR_2_DaylCtrl, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Mult_Class_2_Pod_2_ZN_1_FLR_2_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Mult_Class_2_Pod_2_ZN_1_FLR_2_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.28, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Mult_Class_2_Pod_2_ZN_1_FLR_2_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.28, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Mult_Class_2_Pod_2_ZN_1_FLR_2_DaylRefPt1, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Zone Name 26.500000, !- X-Coordinate of Reference Point {m} 7.323600, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Mult_Class_2_Pod_2_ZN_1_FLR_2_DaylRefPt2, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Zone Name 26.500000, !- X-Coordinate of Reference Point {m} 5.647200, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Corner_Class_1_Pod_3_ZN_1_FLR_1_DaylCtrl, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Corner_Class_1_Pod_3_ZN_1_FLR_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Corner_Class_1_Pod_3_ZN_1_FLR_1_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.56, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Corner_Class_1_Pod_3_ZN_1_FLR_1_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.2, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Corner_Class_1_Pod_3_ZN_1_FLR_1_DaylRefPt1, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Zone Name 7.619800, !- X-Coordinate of Reference Point {m} 3.371100, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Corner_Class_1_Pod_3_ZN_1_FLR_1_DaylRefPt2, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Zone Name 3.371100, !- X-Coordinate of Reference Point {m} 6.031300, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Mult_Class_1_Pod_3_ZN_1_FLR_1_DaylCtrl, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Mult_Class_1_Pod_3_ZN_1_FLR_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Mult_Class_1_Pod_3_ZN_1_FLR_1_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.28, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Mult_Class_1_Pod_3_ZN_1_FLR_1_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.28, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Mult_Class_1_Pod_3_ZN_1_FLR_1_DaylRefPt1, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Zone Name 26.500000, !- X-Coordinate of Reference Point {m} 1.676400, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Mult_Class_1_Pod_3_ZN_1_FLR_1_DaylRefPt2, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Zone Name 26.500000, !- X-Coordinate of Reference Point {m} 3.352800, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Corner_Class_2_Pod_3_ZN_1_FLR_1_DaylCtrl, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Corner_Class_2_Pod_3_ZN_1_FLR_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 270.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Corner_Class_2_Pod_3_ZN_1_FLR_1_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.56, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Corner_Class_2_Pod_3_ZN_1_FLR_1_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.2, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Corner_Class_2_Pod_3_ZN_1_FLR_1_DaylRefPt1, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Zone Name 7.372900, !- X-Coordinate of Reference Point {m} 5.628900, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Corner_Class_2_Pod_3_ZN_1_FLR_1_DaylRefPt2, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Zone Name 3.371100, !- X-Coordinate of Reference Point {m} 2.968800, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Mult_Class_2_Pod_3_ZN_1_FLR_1_DaylCtrl, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Mult_Class_2_Pod_3_ZN_1_FLR_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Mult_Class_2_Pod_3_ZN_1_FLR_1_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.28, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Mult_Class_2_Pod_3_ZN_1_FLR_1_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.28, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Mult_Class_2_Pod_3_ZN_1_FLR_1_DaylRefPt1, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Zone Name 26.500000, !- X-Coordinate of Reference Point {m} 7.323600, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Mult_Class_2_Pod_3_ZN_1_FLR_1_DaylRefPt2, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Zone Name 26.500000, !- X-Coordinate of Reference Point {m} 5.647200, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Corner_Class_1_Pod_3_ZN_1_FLR_2_DaylCtrl, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Corner_Class_1_Pod_3_ZN_1_FLR_2_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Corner_Class_1_Pod_3_ZN_1_FLR_2_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.56, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Corner_Class_1_Pod_3_ZN_1_FLR_2_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.2, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Corner_Class_1_Pod_3_ZN_1_FLR_2_DaylRefPt1, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Zone Name 7.619800, !- X-Coordinate of Reference Point {m} 3.371100, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Corner_Class_1_Pod_3_ZN_1_FLR_2_DaylRefPt2, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Zone Name 3.371100, !- X-Coordinate of Reference Point {m} 6.031300, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Mult_Class_1_Pod_3_ZN_1_FLR_2_DaylCtrl, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Mult_Class_1_Pod_3_ZN_1_FLR_2_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Mult_Class_1_Pod_3_ZN_1_FLR_2_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.28, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Mult_Class_1_Pod_3_ZN_1_FLR_2_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.28, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Mult_Class_1_Pod_3_ZN_1_FLR_2_DaylRefPt1, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Zone Name 26.500000, !- X-Coordinate of Reference Point {m} 1.676400, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Mult_Class_1_Pod_3_ZN_1_FLR_2_DaylRefPt2, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Zone Name 26.500000, !- X-Coordinate of Reference Point {m} 3.352800, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Corner_Class_2_Pod_3_ZN_1_FLR_2_DaylCtrl, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Corner_Class_2_Pod_3_ZN_1_FLR_2_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 270.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Corner_Class_2_Pod_3_ZN_1_FLR_2_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.56, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Corner_Class_2_Pod_3_ZN_1_FLR_2_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.2, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Corner_Class_2_Pod_3_ZN_1_FLR_2_DaylRefPt1, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Zone Name 7.372900, !- X-Coordinate of Reference Point {m} 5.628900, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Corner_Class_2_Pod_3_ZN_1_FLR_2_DaylRefPt2, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Zone Name 3.371100, !- X-Coordinate of Reference Point {m} 2.968800, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Mult_Class_2_Pod_3_ZN_1_FLR_2_DaylCtrl, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Mult_Class_2_Pod_3_ZN_1_FLR_2_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Mult_Class_2_Pod_3_ZN_1_FLR_2_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.28, !- Fraction of Zone Controlled by Reference Point 1 377, !- Illuminance Setpoint at Reference Point 1 {lux} Mult_Class_2_Pod_3_ZN_1_FLR_2_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.28, !- Fraction of Zone Controlled by Reference Point 2 377; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Mult_Class_2_Pod_3_ZN_1_FLR_2_DaylRefPt1, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Zone Name 26.500000, !- X-Coordinate of Reference Point {m} 7.323600, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Mult_Class_2_Pod_3_ZN_1_FLR_2_DaylRefPt2, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Zone Name 26.500000, !- X-Coordinate of Reference Point {m} 5.647200, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Lobby_ZN_1_FLR_1_DaylCtrl, !- Name Lobby_ZN_1_FLR_1, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Lobby_ZN_1_FLR_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Lobby_ZN_1_FLR_1_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.18, !- Fraction of Zone Controlled by Reference Point 1 269.0, !- Illuminance Setpoint at Reference Point 1 {lux} Lobby_ZN_1_FLR_1_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.18, !- Fraction of Zone Controlled by Reference Point 2 269.0; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Lobby_ZN_1_FLR_1_DaylRefPt1, !- Name Lobby_ZN_1_FLR_1, !- Zone Name 7.500000, !- X-Coordinate of Reference Point {m} 1.676400, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Lobby_ZN_1_FLR_1_DaylRefPt2, !- Name Lobby_ZN_1_FLR_1, !- Zone Name 7.500000, !- X-Coordinate of Reference Point {m} 3.352800, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Lobby_ZN_1_FLR_2_DaylCtrl, !- Name Lobby_ZN_1_FLR_2, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Lobby_ZN_1_FLR_2_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Lobby_ZN_1_FLR_2_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.18, !- Fraction of Zone Controlled by Reference Point 1 269.0, !- Illuminance Setpoint at Reference Point 1 {lux} Lobby_ZN_1_FLR_2_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.18, !- Fraction of Zone Controlled by Reference Point 2 269.0; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Lobby_ZN_1_FLR_2_DaylRefPt1, !- Name Lobby_ZN_1_FLR_2, !- Zone Name 7.500000, !- X-Coordinate of Reference Point {m} 1.676400, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Lobby_ZN_1_FLR_2_DaylRefPt2, !- Name Lobby_ZN_1_FLR_2, !- Zone Name 7.500000, !- X-Coordinate of Reference Point {m} 3.352800, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Offices_ZN_1_FLR_1_DaylCtrl, !- Name Offices_ZN_1_FLR_1, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Offices_ZN_1_FLR_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Offices_ZN_1_FLR_1_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.36, !- Fraction of Zone Controlled by Reference Point 1 323.0, !- Illuminance Setpoint at Reference Point 1 {lux} Offices_ZN_1_FLR_1_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.08, !- Fraction of Zone Controlled by Reference Point 2 323.0; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Offices_ZN_1_FLR_1_DaylRefPt1, !- Name Offices_ZN_1_FLR_1, !- Zone Name 18.998200, !- X-Coordinate of Reference Point {m} 3.352800, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Offices_ZN_1_FLR_1_DaylRefPt2, !- Name Offices_ZN_1_FLR_1, !- Zone Name 34.647200, !- X-Coordinate of Reference Point {m} 7.010400, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Offices_ZN_1_FLR_2_DaylCtrl, !- Name Offices_ZN_1_FLR_2, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Offices_ZN_1_FLR_2_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Offices_ZN_1_FLR_2_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.36, !- Fraction of Zone Controlled by Reference Point 1 323.0, !- Illuminance Setpoint at Reference Point 1 {lux} Offices_ZN_1_FLR_2_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.08, !- Fraction of Zone Controlled by Reference Point 2 323.0; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Offices_ZN_1_FLR_2_DaylRefPt1, !- Name Offices_ZN_1_FLR_2, !- Zone Name 18.998200, !- X-Coordinate of Reference Point {m} 3.352800, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Offices_ZN_1_FLR_2_DaylRefPt2, !- Name Offices_ZN_1_FLR_2, !- Zone Name 34.647200, !- X-Coordinate of Reference Point {m} 7.010400, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Cafeteria_ZN_1_FLR_1_DaylCtrl, !- Name Cafeteria_ZN_1_FLR_1, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Cafeteria_ZN_1_FLR_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Cafeteria_ZN_1_FLR_1_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.21, !- Fraction of Zone Controlled by Reference Point 1 215.0, !- Illuminance Setpoint at Reference Point 1 {lux} Cafeteria_ZN_1_FLR_1_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.15, !- Fraction of Zone Controlled by Reference Point 2 215.0; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Cafeteria_ZN_1_FLR_1_DaylRefPt1, !- Name Cafeteria_ZN_1_FLR_1, !- Zone Name 20.647200, !- X-Coordinate of Reference Point {m} 13.000000, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Cafeteria_ZN_1_FLR_1_DaylRefPt2, !- Name Cafeteria_ZN_1_FLR_1, !- Zone Name 12.000000, !- X-Coordinate of Reference Point {m} 22.647200, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, LIBRARY_MEDIA_CENTER_ZN_1_FLR_2_DaylCtrl, !- Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control LIBRARY_MEDIA_CENTER_ZN_1_FLR_2_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} LIBRARY_MEDIA_CENTER_ZN_1_FLR_2_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.21, !- Fraction of Zone Controlled by Reference Point 1 538, !- Illuminance Setpoint at Reference Point 1 {lux} LIBRARY_MEDIA_CENTER_ZN_1_FLR_2_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.11, !- Fraction of Zone Controlled by Reference Point 2 538; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, LIBRARY_MEDIA_CENTER_ZN_1_FLR_2_DaylRefPt1, !- Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Zone Name 20.647200, !- X-Coordinate of Reference Point {m} 17.500000, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, LIBRARY_MEDIA_CENTER_ZN_1_FLR_2_DaylRefPt2, !- Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Zone Name 12.000000, !- X-Coordinate of Reference Point {m} 31.647200, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:Controls, Auditorium_ZN_1_FLR_1_DaylCtrl, !- Name Auditorium_ZN_1_FLR_1, !- Zone Name SplitFlux, !- Daylighting Method , !- Availability Schedule Name Continuousoff, !- Lighting Control Type 0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control 0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control 3, !- Number of Stepped Control Steps 1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control Auditorium_ZN_1_FLR_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name 0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} 22.0, !- Maximum Allowable Discomfort Glare Index , !- DElight Gridding Resolution {m2} Auditorium_ZN_1_FLR_1_DaylRefPt1, !- Daylighting Reference Point 1 Name 0.125, !- Fraction of Zone Controlled by Reference Point 1 538.0, !- Illuminance Setpoint at Reference Point 1 {lux} Auditorium_ZN_1_FLR_1_DaylRefPt2, !- Daylighting Reference Point 2 Name 0.125, !- Fraction of Zone Controlled by Reference Point 2 538.0; !- Illuminance Setpoint at Reference Point 2 {lux} Daylighting:ReferencePoint, Auditorium_ZN_1_FLR_1_DaylRefPt1, !- Name Auditorium_ZN_1_FLR_1, !- Zone Name 9.500600, !- X-Coordinate of Reference Point {m} 21.732800, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} Daylighting:ReferencePoint, Auditorium_ZN_1_FLR_1_DaylRefPt2, !- Name Auditorium_ZN_1_FLR_1, !- Zone Name 28.500400, !- X-Coordinate of Reference Point {m} 21.732800, !- Y-Coordinate of Reference Point {m} 0.762000; !- Z-Coordinate of Reference Point {m} !- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION =========== ZoneInfiltration:DesignFlowRate, Corner_Class_1_Pod_1_ZN_1_FLR_1_Infiltration, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Corner_Class_1_Pod_1_ZN_1_FLR_2_Infiltration, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00025432512, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Mult_Class_1_Pod_1_ZN_1_FLR_1_Infiltration, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Mult_Class_1_Pod_1_ZN_1_FLR_2_Infiltration, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00017523968, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Corridor_Pod_1_ZN_1_FLR_1_Infiltration, !- Name Corridor_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Corridor_Pod_1_ZN_1_FLR_2_Infiltration, !- Name Corridor_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 3.356864e-05, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Corner_Class_2_Pod_1_ZN_1_FLR_1_Infiltration, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Corner_Class_2_Pod_1_ZN_1_FLR_2_Infiltration, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00025432512, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Mult_Class_2_Pod_1_ZN_1_FLR_1_Infiltration, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Mult_Class_2_Pod_1_ZN_1_FLR_2_Infiltration, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00017523968, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Corner_Class_1_Pod_2_ZN_1_FLR_1_Infiltration, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Corner_Class_1_Pod_2_ZN_1_FLR_2_Infiltration, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00025432512, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Mult_Class_1_Pod_2_ZN_1_FLR_1_Infiltration, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Mult_Class_1_Pod_2_ZN_1_FLR_2_Infiltration, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00017523968, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Corridor_Pod_2_ZN_1_FLR_1_Infiltration, !- Name Corridor_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Corridor_Pod_2_ZN_1_FLR_2_Infiltration, !- Name Corridor_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 3.356864e-05, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Corner_Class_2_Pod_2_ZN_1_FLR_1_Infiltration, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Corner_Class_2_Pod_2_ZN_1_FLR_2_Infiltration, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00025432512, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Mult_Class_2_Pod_2_ZN_1_FLR_1_Infiltration, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Mult_Class_2_Pod_2_ZN_1_FLR_2_Infiltration, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00017523968, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Corner_Class_1_Pod_3_ZN_1_FLR_1_Infiltration, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Corner_Class_1_Pod_3_ZN_1_FLR_2_Infiltration, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00025432512, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Mult_Class_1_Pod_3_ZN_1_FLR_1_Infiltration, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Mult_Class_1_Pod_3_ZN_1_FLR_2_Infiltration, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00017523968, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Corridor_Pod_3_ZN_1_FLR_1_Infiltration, !- Name Corridor_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Corridor_Pod_3_ZN_1_FLR_2_Infiltration, !- Name Corridor_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 3.356864e-05, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Corner_Class_2_Pod_3_ZN_1_FLR_1_Infiltration, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Corner_Class_2_Pod_3_ZN_1_FLR_2_Infiltration, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00025432512, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Mult_Class_2_Pod_3_ZN_1_FLR_1_Infiltration, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Mult_Class_2_Pod_3_ZN_1_FLR_2_Infiltration, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00017523968, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Main_Corridor_ZN_1_FLR_1_Infiltration, !- Name Main_Corridor_ZN_1_FLR_1,!- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Main_Corridor_ZN_1_FLR_2_Infiltration, !- Name Main_Corridor_ZN_1_FLR_2,!- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 8.477504e-05, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Lobby_ZN_1_FLR_1_Infiltration, !- Name Lobby_ZN_1_FLR_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Lobby_ZN_1_FLR_2_Infiltration, !- Name Lobby_ZN_1_FLR_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00012630912, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Lobby_ZN_1_FLR_1_Door_Infiltration, !- Name Lobby_ZN_1_FLR_1, !- Zone or ZoneList Name INFIL_Door_Opening_SCH, !- Schedule Name Flow/Zone, !- Design Flow Rate Calculation Method 5.114489639, !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} , !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1.0, !- Constant Term Coefficient 0.0, !- Temperature Term Coefficient 0.0, !- Velocity Term Coefficient 0.0; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Bathrooms_ZN_1_FLR_1_Infiltration, !- Name Bathrooms_ZN_1_FLR_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Bathrooms_ZN_1_FLR_2_Infiltration, !- Name Bathrooms_ZN_1_FLR_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00020254976, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Offices_ZN_1_FLR_1_Infiltration, !- Name Offices_ZN_1_FLR_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Offices_ZN_1_FLR_2_Infiltration, !- Name Offices_ZN_1_FLR_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00015987776, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Gym_ZN_1_FLR_1_Infiltration, !- Name Gym_ZN_1_FLR_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Aux_Gym_ZN_1_FLR_1_Infiltration, !- Name Aux_Gym_ZN_1_FLR_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00018661888, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Auditorium_ZN_1_FLR_1_Infiltration, !- Name Auditorium_ZN_1_FLR_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00019401536, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Kitchen_ZN_1_FLR_1_Infiltration, !- Name Kitchen_ZN_1_FLR_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, LIBRARY_MEDIA_CENTER_ZN_1_FLR_2_Infiltration, !- Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00012460224, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Cafeteria_ZN_1_FLR_1_Infiltration, !- Name Cafeteria_ZN_1_FLR_1, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Mech_ZN_1_FLR_2_Infiltration, !- Name Mech_ZN_1_FLR_2, !- Zone or ZoneList Name INFIL_SCH_PNNL, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 0.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.2240, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient !- =========== ALL OBJECTS IN CLASS: EXTERIOR:LIGHTS =========== Exterior:Lights, Exterior_Lights_a, !- Name Exterior_lighting_schedule_a, !- Schedule Name 441.8, !- Design Level {W} AstronomicalClock, !- Control Option General; !- End-Use Subcategory Exterior:Lights, Exterior_Lights_b, !- Name Exterior_lighting_schedule_b_2016, !- Schedule Name 2994.5, !- Design Level {W} AstronomicalClock, !- Control Option General; !- End-Use Subcategory Exterior:Lights, Exterior_Lights_c, !- Name Exterior_lighting_schedule_c_2016, !- Schedule Name 2973.7, !- Design Level {W} AstronomicalClock, !- Control Option General; !- End-Use Subcategory Schedule:Compact, Exterior_lighting_schedule_a, !- Name fraction, !- Schedule Type Limits Name Through:12/31, !- Field 1 For:AllDays, !- Field 2 Until: 06:00,0, !- Field 3 Until: 24:00,1; !- Field 5 Schedule:Compact, Exterior_lighting_schedule_b, !- Name fraction, !- Schedule Type Limits Name Through:12/31, !- Field 1 For:AllDays, !- Field 2 Until: 06:00,0.7, !- Field 3 Until: 24:00,1; !- Field 5 Schedule:Compact, Exterior_lighting_schedule_a_IECC2015, !- Name fraction, !- Schedule Type Limits Name Through:12/31, !- Field 1 For:Weekdays SummerDesignDay, !- Field 2 Until: 08:00,0, !- Field 3 Until: 21:00,1, !- Field 5 Until: 24:00,0, !- Field 7 For:Saturdays, !- Field 9 Until: 24:00,0, !- Field 10 For:AllOtherDays, !- Field 12 Until: 24:00,0; !- Field 13 Schedule:Compact, Exterior_lighting_schedule_b_2016, !- Name fraction, !- Schedule Type Limits Name Through:12/31, !- Field 1 For:AllDays, !- Field 2 Until: 06:00,0.5, !- Field 3 Until: 24:00,1; !- Field 5 Schedule:Compact, Exterior_lighting_schedule_c_2016, !- Name fraction, !- Schedule Type Limits Name Through:12/31, !- Field 1 For:AllDays, !- Field 2 Until: 06:00,0.5, !- Field 3 Until: 21:00,1, !- Field 5 Until: 24:00,0.5; !- Field 7 !- =========== ALL OBJECTS IN CLASS: SIZING:PARAMETERS =========== Sizing:Parameters, 1.0000, !- Heating Sizing Factor 1.0000, !- Cooling Sizing Factor 6; !- Timesteps in Averaging Window !- =========== ALL OBJECTS IN CLASS: SIZING:ZONE =========== Sizing:Zone, Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00238745,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00238745,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00238745,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00238745,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Corridor_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corridor_Pod_1_ZN_1_FLR_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corridor_Pod_1_ZN_1_FLR_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000304781, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Corridor_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corridor_Pod_1_ZN_1_FLR_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corridor_Pod_1_ZN_1_FLR_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000304781, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00238745,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00238745,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00238745,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00238745,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00238745,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00238745,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00238745,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00238745,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Corridor_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corridor_Pod_2_ZN_1_FLR_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corridor_Pod_2_ZN_1_FLR_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000304781, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Corridor_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corridor_Pod_2_ZN_1_FLR_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corridor_Pod_2_ZN_1_FLR_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000304781, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00238745,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00238745,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00238745,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00238745,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00238745,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00238745,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00238745,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00238745,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Corridor_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corridor_Pod_3_ZN_1_FLR_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corridor_Pod_3_ZN_1_FLR_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000304781, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Corridor_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corridor_Pod_3_ZN_1_FLR_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corridor_Pod_3_ZN_1_FLR_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000304781, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00238745,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00238745,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00238745,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.00238745, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Main_Corridor_ZN_1_FLR_1,!- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Main_Corridor_ZN_1_FLR_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Main_Corridor_ZN_1_FLR_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000304781, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Main_Corridor_ZN_1_FLR_2,!- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Main_Corridor_ZN_1_FLR_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Main_Corridor_ZN_1_FLR_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000304781, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Lobby_ZN_1_FLR_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Lobby_ZN_1_FLR_1,!- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Lobby_ZN_1_FLR_1,!- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000304781, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Lobby_ZN_1_FLR_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Lobby_ZN_1_FLR_2,!- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Lobby_ZN_1_FLR_2,!- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000304781, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Bathrooms_ZN_1_FLR_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Bathrooms_ZN_1_FLR_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Bathrooms_ZN_1_FLR_1, !- Name Flow/area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Bathrooms_ZN_1_FLR_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Bathrooms_ZN_1_FLR_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Bathrooms_ZN_1_FLR_2, !- Name Flow/area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Offices_ZN_1_FLR_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Offices_ZN_1_FLR_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Offices_ZN_1_FLR_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Offices_ZN_1_FLR_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Offices_ZN_1_FLR_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Offices_ZN_1_FLR_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Gym_ZN_1_FLR_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Gym_ZN_1_FLR_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA Gym_ZN_1_FLR_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.001523905, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Aux_Gym_ZN_1_FLR_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Aux_Gym_ZN_1_FLR_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA Aux_Gym_ZN_1_FLR_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.001523905, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Auditorium_ZN_1_FLR_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Auditorium_ZN_1_FLR_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA Auditorium_ZN_1_FLR_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.004114542, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Kitchen_ZN_1_FLR_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Kitchen_ZN_1_FLR_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDayWithLimit, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.254379672279695, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA Kitchen_ZN_1_FLR_1, !- Name Maximum, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.001178183, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} 0.254379672279695; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.000863546, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Cafeteria_ZN_1_FLR_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Cafeteria_ZN_1_FLR_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} ; !- Heating Maximum Air Flow Fraction DesignSpecification:OutdoorAir, SZ DSOA Cafeteria_ZN_1_FLR_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0.004724104,!- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Mech_ZN_1_FLR_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Mech_ZN_1_FLR_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Mech_ZN_1_FLR_1, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Mech_ZN_1_FLR_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 40.0, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Mech_ZN_1_FLR_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method 0.0, !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} 0.0, !- Cooling Minimum Air Flow {m3/s} 0.0, !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method 0.0, !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, SZ DSOA Mech_ZN_1_FLR_2, !- Name Flow/Area, !- Outdoor Air Method , !- Outdoor Air Flow per Person {m3/s-person} 0, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} DesignSpecification:ZoneAirDistribution, VAV_Zone_AirDistribution, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} , !- Zone Air Distribution Effectiveness Schedule Name , !- Zone Secondary Recirculation Fraction {dimensionless} 0.6; !- Minimum Zone Ventilation Efficiency {dimensionless} !- =========== ALL OBJECTS IN CLASS: SIZING:SYSTEM =========== Sizing:System, VAV_POD_1, !- AirLoop Name Sensible, !- Type of Load to Size On 7.5943, !- Design Outdoor Air Flow Rate {m3/s} 0.3000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 12.8000, !- Central Heating Design Supply Air Temperature {C} Coincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum; !- System Outdoor Air Method Sizing:System, VAV_POD_2, !- AirLoop Name Sensible, !- Type of Load to Size On 7.5943, !- Design Outdoor Air Flow Rate {m3/s} 0.3000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 12.8000, !- Central Heating Design Supply Air Temperature {C} Coincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum; !- System Outdoor Air Method Sizing:System, VAV_POD_3, !- AirLoop Name Sensible, !- Type of Load to Size On 7.5943, !- Design Outdoor Air Flow Rate {m3/s} 0.3000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 12.8000, !- Central Heating Design Supply Air Temperature {C} Coincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum; !- System Outdoor Air Method Sizing:System, VAV_OTHER, !- AirLoop Name Sensible, !- Type of Load to Size On 2.6769, !- Design Outdoor Air Flow Rate {m3/s} 0.3000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 12.8000, !- Central Heating Design Supply Air Temperature {C} Coincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum; !- System Outdoor Air Method Sizing:System, PSZ-AC_1:5, !- AirLoop Name Sensible, !- Type of Load to Size On AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} 1.000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 40, !- Central Heating Design Supply Air Temperature {C} Coincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum, !- System Outdoor Air Method 1.0, !- Zone Maximum Outdoor Air Fraction CoolingDesignCapacity, !- Cooling Design Capacity Method autosize, !- Cooling Design Capacity {W} , !- Cooling Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Cooling Design Capacity HeatingDesignCapacity, !- Heating Design Capacity Method autosize, !- Heating Design Capacity {W} , !- Heating Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Heating Design Capacity OnOff; !- Central Cooling Capacity Control Method Sizing:System, PSZ-AC_2:6, !- AirLoop Name Sensible, !- Type of Load to Size On AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} 1.0000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 40, !- Central Heating Design Supply Air Temperature {C} Coincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum, !- System Outdoor Air Method 1.0, !- Zone Maximum Outdoor Air Fraction CoolingDesignCapacity, !- Cooling Design Capacity Method autosize, !- Cooling Design Capacity {W} , !- Cooling Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Cooling Design Capacity HeatingDesignCapacity, !- Heating Design Capacity Method autosize, !- Heating Design Capacity {W} , !- Heating Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Heating Design Capacity OnOff; !- Central Cooling Capacity Control Method Sizing:System, PSZ-AC_3:7, !- AirLoop Name Sensible, !- Type of Load to Size On AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} 1.0000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 40, !- Central Heating Design Supply Air Temperature {C} Coincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum, !- System Outdoor Air Method 1.0, !- Zone Maximum Outdoor Air Fraction CoolingDesignCapacity, !- Cooling Design Capacity Method autosize, !- Cooling Design Capacity {W} , !- Cooling Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Cooling Design Capacity HeatingDesignCapacity, !- Heating Design Capacity Method autosize, !- Heating Design Capacity {W} , !- Heating Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Heating Design Capacity OnOff; !- Central Cooling Capacity Control Method Sizing:System, PSZ-AC_4:8, !- AirLoop Name Sensible, !- Type of Load to Size On AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} 1.0000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 40, !- Central Heating Design Supply Air Temperature {C} Coincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum, !- System Outdoor Air Method 1.0, !- Zone Maximum Outdoor Air Fraction CoolingDesignCapacity, !- Cooling Design Capacity Method autosize, !- Cooling Design Capacity {W} , !- Cooling Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Cooling Design Capacity HeatingDesignCapacity, !- Heating Design Capacity Method autosize, !- Heating Design Capacity {W} , !- Heating Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Heating Design Capacity OnOff; !- Central Cooling Capacity Control Method Sizing:System, PSZ-AC_5:9, !- AirLoop Name Sensible, !- Type of Load to Size On AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} 1.0000, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 40, !- Central Heating Design Supply Air Temperature {C} Coincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum, !- System Outdoor Air Method 1.0, !- Zone Maximum Outdoor Air Fraction CoolingDesignCapacity, !- Cooling Design Capacity Method autosize, !- Cooling Design Capacity {W} , !- Cooling Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Cooling Design Capacity HeatingDesignCapacity, !- Heating Design Capacity Method autosize, !- Heating Design Capacity {W} , !- Heating Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Heating Design Capacity OnOff; !- Central Cooling Capacity Control Method !- =========== ALL OBJECTS IN CLASS: SIZING:PLANT =========== Sizing:Plant, SHWSys1, !- Plant or Condenser Loop Name Heating, !- Loop Type 48.9, !- Design Loop Exit Temperature {C} 5.0; !- Loop Design Temperature Difference {deltaC} Sizing:Plant, HeatSys1, !- Plant or Condenser Loop Name Heating, !- Loop Type 82.0, !- Design Loop Exit Temperature {C} 11.0; !- Loop Design Temperature Difference {deltaC} Sizing:Plant, CoolSys1, !- Plant or Condenser Loop Name Cooling, !- Loop Type 6.67, !- Design Loop Exit Temperature {C} 8.33; !- Loop Design Temperature Difference {deltaC} !- =========== ALL OBJECTS IN CLASS: ZONECONTROL:THERMOSTAT =========== ZoneControl:Thermostat, Corner_Class_1_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Corner_Class_1_Pod_1_ZN_1_FLR_2 Thermostat, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_1_ZN_1_FLR_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Mult_Class_1_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Mult_Class_1_Pod_1_ZN_1_FLR_2 Thermostat, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_1_ZN_1_FLR_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Corridor_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Corridor_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Corridor_Pod_1_ZN_1_FLR_2 Thermostat, !- Name Corridor_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_1_ZN_1_FLR_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Corner_Class_2_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Corner_Class_2_Pod_1_ZN_1_FLR_2 Thermostat, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_1_ZN_1_FLR_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Mult_Class_2_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Mult_Class_2_Pod_1_ZN_1_FLR_2 Thermostat, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_1_ZN_1_FLR_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Corner_Class_1_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Corner_Class_1_Pod_2_ZN_1_FLR_2 Thermostat, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_2_ZN_1_FLR_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Mult_Class_1_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Mult_Class_1_Pod_2_ZN_1_FLR_2 Thermostat, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_2_ZN_1_FLR_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Corridor_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Corridor_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Corridor_Pod_2_ZN_1_FLR_2 Thermostat, !- Name Corridor_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_2_ZN_1_FLR_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Corner_Class_2_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Corner_Class_2_Pod_2_ZN_1_FLR_2 Thermostat, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_2_ZN_1_FLR_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Mult_Class_2_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Mult_Class_2_Pod_2_ZN_1_FLR_2 Thermostat, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_2_ZN_1_FLR_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Corner_Class_1_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Corner_Class_1_Pod_3_ZN_1_FLR_2 Thermostat, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_3_ZN_1_FLR_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Mult_Class_1_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Mult_Class_1_Pod_3_ZN_1_FLR_2 Thermostat, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_3_ZN_1_FLR_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Corridor_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Corridor_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Corridor_Pod_3_ZN_1_FLR_2 Thermostat, !- Name Corridor_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_3_ZN_1_FLR_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Corner_Class_2_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Corner_Class_2_Pod_3_ZN_1_FLR_2 Thermostat, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_3_ZN_1_FLR_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Mult_Class_2_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Mult_Class_2_Pod_3_ZN_1_FLR_2 Thermostat, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_3_ZN_1_FLR_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Main_Corridor_ZN_1_FLR_1 Thermostat, !- Name Main_Corridor_ZN_1_FLR_1,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Main_Corridor_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Main_Corridor_ZN_1_FLR_2 Thermostat, !- Name Main_Corridor_ZN_1_FLR_2,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Main_Corridor_ZN_1_FLR_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Lobby_ZN_1_FLR_1 Thermostat, !- Name Lobby_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lobby_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Lobby_ZN_1_FLR_2 Thermostat, !- Name Lobby_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lobby_ZN_1_FLR_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Bathrooms_ZN_1_FLR_1 Thermostat, !- Name Bathrooms_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Bathrooms_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Bathrooms_ZN_1_FLR_2 Thermostat, !- Name Bathrooms_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Bathrooms_ZN_1_FLR_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Offices_ZN_1_FLR_1 Thermostat, !- Name Offices_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Offices_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Offices_ZN_1_FLR_2 Thermostat, !- Name Offices_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Offices_ZN_1_FLR_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Gym_ZN_1_FLR_1 Thermostat, !- Name Gym_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Gym_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Aux_Gym_ZN_1_FLR_1 Thermostat, !- Name Aux_Gym_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Aux_Gym_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Auditorium_ZN_1_FLR_1 Thermostat, !- Name Auditorium_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Auditorium_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Kitchen_ZN_1_FLR_1 Thermostat, !- Name Kitchen_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Kitchen_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 Thermostat, !- Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Cafeteria_ZN_1_FLR_1 Thermostat, !- Name Cafeteria_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Cafeteria_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Mech_ZN_1_FLR_1 Thermostat, !- Name Mech_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mech_ZN_1_FLR_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Mech_ZN_1_FLR_2 Thermostat, !- Name Mech_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mech_ZN_1_FLR_2 DualSPSched; !- Control 1 Name !- =========== ALL OBJECTS IN CLASS: THERMOSTATSETPOINT:DUALSETPOINT =========== ThermostatSetpoint:DualSetpoint, Corner_Class_1_Pod_1_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Corner_Class_1_Pod_1_ZN_1_FLR_2 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Mult_Class_1_Pod_1_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Mult_Class_1_Pod_1_ZN_1_FLR_2 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Corridor_Pod_1_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Corridor_Pod_1_ZN_1_FLR_2 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Corner_Class_2_Pod_1_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Corner_Class_2_Pod_1_ZN_1_FLR_2 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Mult_Class_2_Pod_1_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Mult_Class_2_Pod_1_ZN_1_FLR_2 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Corner_Class_1_Pod_2_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Corner_Class_1_Pod_2_ZN_1_FLR_2 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Mult_Class_1_Pod_2_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Mult_Class_1_Pod_2_ZN_1_FLR_2 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Corridor_Pod_2_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Corridor_Pod_2_ZN_1_FLR_2 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Corner_Class_2_Pod_2_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Corner_Class_2_Pod_2_ZN_1_FLR_2 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Mult_Class_2_Pod_2_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Mult_Class_2_Pod_2_ZN_1_FLR_2 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Corner_Class_1_Pod_3_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Corner_Class_1_Pod_3_ZN_1_FLR_2 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Mult_Class_1_Pod_3_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Mult_Class_1_Pod_3_ZN_1_FLR_2 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Corridor_Pod_3_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Corridor_Pod_3_ZN_1_FLR_2 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Corner_Class_2_Pod_3_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Corner_Class_2_Pod_3_ZN_1_FLR_2 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Mult_Class_2_Pod_3_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Mult_Class_2_Pod_3_ZN_1_FLR_2 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Main_Corridor_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Main_Corridor_ZN_1_FLR_2 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Lobby_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Lobby_ZN_1_FLR_2 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Bathrooms_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_Setback, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_setup; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Bathrooms_ZN_1_FLR_2 DualSPSched, !- Name HTGSETP_SCH_Setback, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_setup; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Offices_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM_w_SB, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM_w_SB; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Offices_ZN_1_FLR_2 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM_w_SB, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM_w_SB; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Gym_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Aux_Gym_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Auditorium_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Kitchen_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Cafeteria_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Mech_ZN_1_FLR_1 DualSPSched, !- Name HTGSETP_SCH_Setback, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_setup; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Mech_ZN_1_FLR_2 DualSPSched, !- Name HTGSETP_SCH_Setback, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH_setup; !- Cooling Setpoint Temperature Schedule Name !- =========== ALL OBJECTS IN CLASS: AIRTERMINAL:SINGLEDUCT:UNCONTROLLED =========== AirTerminal:SingleDuct:Uncontrolled, Gym_ZN_1_FLR_1 Direct Air, !- Name ALWAYS_ON, !- Availability Schedule Name Gym_ZN_1_FLR_1 Direct Air Inlet Node Name, !- Zone Supply Air Node Name AUTOSIZE; !- Maximum Air Flow Rate {m3/s} AirTerminal:SingleDuct:Uncontrolled, Aux_Gym_ZN_1_FLR_1 Direct Air, !- Name ALWAYS_ON, !- Availability Schedule Name Aux_Gym_ZN_1_FLR_1 Direct Air Inlet Node Name, !- Zone Supply Air Node Name AUTOSIZE; !- Maximum Air Flow Rate {m3/s} AirTerminal:SingleDuct:Uncontrolled, Auditorium_ZN_1_FLR_1 Direct Air, !- Name ALWAYS_ON, !- Availability Schedule Name Auditorium_ZN_1_FLR_1 Direct Air Inlet Node Name, !- Zone Supply Air Node Name AUTOSIZE; !- Maximum Air Flow Rate {m3/s} AirTerminal:SingleDuct:Uncontrolled, Kitchen_ZN_1_FLR_1 Direct Air, !- Name ALWAYS_ON, !- Availability Schedule Name Kitchen_ZN_1_FLR_1 Direct Air Inlet Node Name, !- Zone Supply Air Node Name AUTOSIZE; !- Maximum Air Flow Rate {m3/s} AirTerminal:SingleDuct:Uncontrolled, Cafeteria_ZN_1_FLR_1 Direct Air, !- Name ALWAYS_ON, !- Availability Schedule Name Cafeteria_ZN_1_FLR_1 Direct Air Inlet Node Name, !- Zone Supply Air Node Name AUTOSIZE; !- Maximum Air Flow Rate {m3/s} !- =========== ALL OBJECTS IN CLASS: AIRTERMINAL:SINGLEDUCT:VAV:REHEAT =========== AirTerminal:SingleDuct:VAV:Reheat, Corner_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corner_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Corner_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corner_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corner_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Corner_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corner_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Corner_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corner_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corner_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Mult_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Mult_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Mult_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Mult_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Mult_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Mult_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Mult_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Mult_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Mult_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Mult_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Corridor_Pod_1_ZN_1_FLR_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corridor_Pod_1_ZN_1_FLR_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Corridor_Pod_1_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.544, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corridor_Pod_1_ZN_1_FLR_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corridor_Pod_1_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Corridor_Pod_1_ZN_1_FLR_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corridor_Pod_1_ZN_1_FLR_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Corridor_Pod_1_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.341, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corridor_Pod_1_ZN_1_FLR_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corridor_Pod_1_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Corner_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corner_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Corner_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corner_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corner_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Corner_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corner_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Corner_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corner_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corner_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Mult_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Mult_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Mult_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Mult_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Mult_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Mult_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Mult_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Mult_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Mult_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Mult_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Corner_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corner_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Corner_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corner_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corner_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Corner_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corner_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Corner_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corner_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corner_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Mult_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Mult_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Mult_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Mult_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Mult_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Mult_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Mult_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Mult_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Mult_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Mult_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Corridor_Pod_2_ZN_1_FLR_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corridor_Pod_2_ZN_1_FLR_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Corridor_Pod_2_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.549, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corridor_Pod_2_ZN_1_FLR_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corridor_Pod_2_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Corridor_Pod_2_ZN_1_FLR_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corridor_Pod_2_ZN_1_FLR_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Corridor_Pod_2_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.549, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corridor_Pod_2_ZN_1_FLR_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corridor_Pod_2_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Corner_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corner_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Corner_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corner_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corner_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Corner_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corner_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Corner_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corner_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corner_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Mult_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Mult_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Mult_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Mult_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Mult_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Mult_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Mult_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Mult_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Mult_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Mult_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Corner_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corner_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Corner_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corner_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corner_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Corner_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corner_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Corner_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corner_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corner_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Mult_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Mult_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Mult_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Mult_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Mult_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Mult_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Mult_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Mult_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Mult_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Mult_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Corridor_Pod_3_ZN_1_FLR_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corridor_Pod_3_ZN_1_FLR_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Corridor_Pod_3_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.537, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corridor_Pod_3_ZN_1_FLR_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corridor_Pod_3_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Corridor_Pod_3_ZN_1_FLR_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corridor_Pod_3_ZN_1_FLR_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Corridor_Pod_3_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.325, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corridor_Pod_3_ZN_1_FLR_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corridor_Pod_3_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Corner_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corner_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Corner_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corner_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corner_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Corner_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Corner_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Corner_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Corner_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Corner_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Mult_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Mult_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Mult_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Mult_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Mult_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Mult_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Mult_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Mult_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 1.0, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Mult_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Mult_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Main_Corridor_ZN_1_FLR_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Main_Corridor_ZN_1_FLR_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Main_Corridor_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.517, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Main_Corridor_ZN_1_FLR_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Main_Corridor_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Main_Corridor_ZN_1_FLR_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Main_Corridor_ZN_1_FLR_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Main_Corridor_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.316, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Main_Corridor_ZN_1_FLR_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Main_Corridor_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Lobby_ZN_1_FLR_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Lobby_ZN_1_FLR_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Lobby_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.466, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Lobby_ZN_1_FLR_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Lobby_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Lobby_ZN_1_FLR_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Lobby_ZN_1_FLR_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Lobby_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.294, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Lobby_ZN_1_FLR_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Lobby_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Bathrooms_ZN_1_FLR_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Bathrooms_ZN_1_FLR_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Bathrooms_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.01, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Bathrooms_ZN_1_FLR_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Bathrooms_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Bathrooms_ZN_1_FLR_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Bathrooms_ZN_1_FLR_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Bathrooms_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.01, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Bathrooms_ZN_1_FLR_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Bathrooms_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Offices_ZN_1_FLR_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Offices_ZN_1_FLR_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Offices_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Scheduled, !- Zone Minimum Air Flow Input Method , !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} Offices_ZN_1_FLR_1_MDP_Sch, !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Offices_ZN_1_FLR_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Offices_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Offices_ZN_1_FLR_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Offices_ZN_1_FLR_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Offices_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Scheduled, !- Zone Minimum Air Flow Input Method , !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} Offices_ZN_1_FLR_2_MDP_Sch, !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Offices_ZN_1_FLR_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Offices_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 VAV Box Damper Node, !- Damper Air Outlet Node Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.617, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Mech_ZN_1_FLR_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Mech_ZN_1_FLR_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Mech_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.01, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Mech_ZN_1_FLR_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Mech_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} AirTerminal:SingleDuct:VAV:Reheat, Mech_ZN_1_FLR_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Mech_ZN_1_FLR_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Mech_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.01, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Water, !- Reheat Coil Object Type Mech_ZN_1_FLR_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Mech_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance ReverseWithLimits, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} 0.5, !- Maximum Flow Fraction During Reheat 40; !- Maximum Reheat Air Temperature {C} ZoneHVAC:AirDistributionUnit, Corner_Class_1_Pod_1_ZN_1_FLR_1 VAV Box, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corner_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Corner_Class_1_Pod_1_ZN_1_FLR_2 VAV Box, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corner_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Mult_Class_1_Pod_1_ZN_1_FLR_1 VAV Box, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Mult_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Mult_Class_1_Pod_1_ZN_1_FLR_2 VAV Box, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Mult_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Corridor_Pod_1_ZN_1_FLR_1 VAV Box, !- Name Corridor_Pod_1_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corridor_Pod_1_ZN_1_FLR_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Corridor_Pod_1_ZN_1_FLR_2 VAV Box, !- Name Corridor_Pod_1_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corridor_Pod_1_ZN_1_FLR_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Corner_Class_2_Pod_1_ZN_1_FLR_1 VAV Box, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corner_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Corner_Class_2_Pod_1_ZN_1_FLR_2 VAV Box, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corner_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Mult_Class_2_Pod_1_ZN_1_FLR_1 VAV Box, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Mult_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Mult_Class_2_Pod_1_ZN_1_FLR_2 VAV Box, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Mult_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Corner_Class_1_Pod_2_ZN_1_FLR_1 VAV Box, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corner_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Corner_Class_1_Pod_2_ZN_1_FLR_2 VAV Box, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corner_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Mult_Class_1_Pod_2_ZN_1_FLR_1 VAV Box, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Mult_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Mult_Class_1_Pod_2_ZN_1_FLR_2 VAV Box, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Mult_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Corridor_Pod_2_ZN_1_FLR_1 VAV Box, !- Name Corridor_Pod_2_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corridor_Pod_2_ZN_1_FLR_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Corridor_Pod_2_ZN_1_FLR_2 VAV Box, !- Name Corridor_Pod_2_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corridor_Pod_2_ZN_1_FLR_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Corner_Class_2_Pod_2_ZN_1_FLR_1 VAV Box, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corner_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Corner_Class_2_Pod_2_ZN_1_FLR_2 VAV Box, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corner_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Mult_Class_2_Pod_2_ZN_1_FLR_1 VAV Box, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Mult_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Mult_Class_2_Pod_2_ZN_1_FLR_2 VAV Box, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Mult_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Corner_Class_1_Pod_3_ZN_1_FLR_1 VAV Box, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corner_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Corner_Class_1_Pod_3_ZN_1_FLR_2 VAV Box, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corner_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Mult_Class_1_Pod_3_ZN_1_FLR_1 VAV Box, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Mult_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Mult_Class_1_Pod_3_ZN_1_FLR_2 VAV Box, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Mult_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Corridor_Pod_3_ZN_1_FLR_1 VAV Box, !- Name Corridor_Pod_3_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corridor_Pod_3_ZN_1_FLR_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Corridor_Pod_3_ZN_1_FLR_2 VAV Box, !- Name Corridor_Pod_3_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corridor_Pod_3_ZN_1_FLR_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Corner_Class_2_Pod_3_ZN_1_FLR_1 VAV Box, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corner_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Corner_Class_2_Pod_3_ZN_1_FLR_2 VAV Box, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Corner_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Mult_Class_2_Pod_3_ZN_1_FLR_1 VAV Box, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Mult_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Mult_Class_2_Pod_3_ZN_1_FLR_2 VAV Box, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Mult_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Main_Corridor_ZN_1_FLR_1 VAV Box, !- Name Main_Corridor_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Main_Corridor_ZN_1_FLR_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Main_Corridor_ZN_1_FLR_2 VAV Box, !- Name Main_Corridor_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Main_Corridor_ZN_1_FLR_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Lobby_ZN_1_FLR_1 VAV Box,!- Name Lobby_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Lobby_ZN_1_FLR_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Lobby_ZN_1_FLR_2 VAV Box,!- Name Lobby_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Lobby_ZN_1_FLR_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Bathrooms_ZN_1_FLR_1 VAV Box, !- Name Bathrooms_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Bathrooms_ZN_1_FLR_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Bathrooms_ZN_1_FLR_2 VAV Box, !- Name Bathrooms_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Bathrooms_ZN_1_FLR_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Offices_ZN_1_FLR_1 VAV Box, !- Name Offices_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Offices_ZN_1_FLR_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Offices_ZN_1_FLR_2 VAV Box, !- Name Offices_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Offices_ZN_1_FLR_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 VAV Box, !- Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Mech_ZN_1_FLR_1 VAV Box, !- Name Mech_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Mech_ZN_1_FLR_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Mech_ZN_1_FLR_2 VAV Box, !- Name Mech_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Mech_ZN_1_FLR_2 VAV Box Component; !- Air Terminal Name !- =========== ALL OBJECTS IN CLASS: ZONEHVAC:EQUIPMENTLIST =========== ZoneHVAC:EquipmentList, Corner_Class_1_Pod_1_ZN_1_FLR_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Corner_Class_1_Pod_1_ZN_1_FLR_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Corner_Class_1_Pod_1_ZN_1_FLR_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Corner_Class_1_Pod_1_ZN_1_FLR_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Mult_Class_1_Pod_1_ZN_1_FLR_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Mult_Class_1_Pod_1_ZN_1_FLR_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Mult_Class_1_Pod_1_ZN_1_FLR_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Mult_Class_1_Pod_1_ZN_1_FLR_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Corridor_Pod_1_ZN_1_FLR_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Corridor_Pod_1_ZN_1_FLR_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Corridor_Pod_1_ZN_1_FLR_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Corridor_Pod_1_ZN_1_FLR_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Corner_Class_2_Pod_1_ZN_1_FLR_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Corner_Class_2_Pod_1_ZN_1_FLR_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Corner_Class_2_Pod_1_ZN_1_FLR_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Corner_Class_2_Pod_1_ZN_1_FLR_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Mult_Class_2_Pod_1_ZN_1_FLR_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Mult_Class_2_Pod_1_ZN_1_FLR_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Mult_Class_2_Pod_1_ZN_1_FLR_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Mult_Class_2_Pod_1_ZN_1_FLR_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Corner_Class_1_Pod_2_ZN_1_FLR_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Corner_Class_1_Pod_2_ZN_1_FLR_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Corner_Class_1_Pod_2_ZN_1_FLR_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Corner_Class_1_Pod_2_ZN_1_FLR_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Mult_Class_1_Pod_2_ZN_1_FLR_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Mult_Class_1_Pod_2_ZN_1_FLR_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Mult_Class_1_Pod_2_ZN_1_FLR_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Mult_Class_1_Pod_2_ZN_1_FLR_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Corridor_Pod_2_ZN_1_FLR_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Corridor_Pod_2_ZN_1_FLR_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Corridor_Pod_2_ZN_1_FLR_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Corridor_Pod_2_ZN_1_FLR_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Corner_Class_2_Pod_2_ZN_1_FLR_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Corner_Class_2_Pod_2_ZN_1_FLR_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Corner_Class_2_Pod_2_ZN_1_FLR_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Corner_Class_2_Pod_2_ZN_1_FLR_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Mult_Class_2_Pod_2_ZN_1_FLR_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Mult_Class_2_Pod_2_ZN_1_FLR_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Mult_Class_2_Pod_2_ZN_1_FLR_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Mult_Class_2_Pod_2_ZN_1_FLR_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Corner_Class_1_Pod_3_ZN_1_FLR_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Corner_Class_1_Pod_3_ZN_1_FLR_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Corner_Class_1_Pod_3_ZN_1_FLR_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Corner_Class_1_Pod_3_ZN_1_FLR_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Mult_Class_1_Pod_3_ZN_1_FLR_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Mult_Class_1_Pod_3_ZN_1_FLR_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Mult_Class_1_Pod_3_ZN_1_FLR_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Mult_Class_1_Pod_3_ZN_1_FLR_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Corridor_Pod_3_ZN_1_FLR_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Corridor_Pod_3_ZN_1_FLR_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Corridor_Pod_3_ZN_1_FLR_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Corridor_Pod_3_ZN_1_FLR_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Corner_Class_2_Pod_3_ZN_1_FLR_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Corner_Class_2_Pod_3_ZN_1_FLR_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Corner_Class_2_Pod_3_ZN_1_FLR_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Corner_Class_2_Pod_3_ZN_1_FLR_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Mult_Class_2_Pod_3_ZN_1_FLR_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Mult_Class_2_Pod_3_ZN_1_FLR_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Mult_Class_2_Pod_3_ZN_1_FLR_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Mult_Class_2_Pod_3_ZN_1_FLR_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Main_Corridor_ZN_1_FLR_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme Fan:ZoneExhaust, !- Zone Equipment 1 Object Type Main_Corridor_ZN_1_FLR_1 dummy Exhaust Fan, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:AirDistributionUnit, !- Zone Equipment 2 Object Type Main_Corridor_ZN_1_FLR_1 VAV Box, !- Zone Equipment 2 Name 2, !- Zone Equipment 2 Cooling Sequence 2; !- Zone Equipment 2 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Main_Corridor_ZN_1_FLR_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme Fan:ZoneExhaust, !- Zone Equipment 1 Object Type Main_Corridor_ZN_1_FLR_2 dummy Exhaust Fan, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:AirDistributionUnit, !- Zone Equipment 2 Object Type Main_Corridor_ZN_1_FLR_2 VAV Box, !- Zone Equipment 2 Name 2, !- Zone Equipment 2 Cooling Sequence 2; !- Zone Equipment 2 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Lobby_ZN_1_FLR_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Lobby_ZN_1_FLR_1 VAV Box,!- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Lobby_ZN_1_FLR_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Lobby_ZN_1_FLR_2 VAV Box,!- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Bathrooms_ZN_1_FLR_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme Fan:ZoneExhaust, !- Zone Equipment 1 Object Type Bathrooms_ZN_1_FLR_1 Exhaust Fan, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:AirDistributionUnit, !- Zone Equipment 2 Object Type Bathrooms_ZN_1_FLR_1 VAV Box, !- Zone Equipment 2 Name 2, !- Zone Equipment 2 Cooling Sequence 2; !- Zone Equipment 2 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Bathrooms_ZN_1_FLR_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme Fan:ZoneExhaust, !- Zone Equipment 1 Object Type Bathrooms_ZN_1_FLR_2 Exhaust Fan, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:AirDistributionUnit, !- Zone Equipment 2 Object Type Bathrooms_ZN_1_FLR_2 VAV Box, !- Zone Equipment 2 Name 2, !- Zone Equipment 2 Cooling Sequence 2; !- Zone Equipment 2 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Offices_ZN_1_FLR_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Offices_ZN_1_FLR_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Offices_ZN_1_FLR_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Offices_ZN_1_FLR_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Gym_ZN_1_FLR_1 Equipment,!- Name SequentialLoad, !- Load Distribution Scheme Fan:ZoneExhaust, !- Zone Equipment 1 Object Type GYM_ZN_1_FLR_1 dummy Exhaust Fan, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 2 Object Type Gym_ZN_1_FLR_1 Direct Air, !- Zone Equipment 2 Name 2, !- Zone Equipment 2 Cooling Sequence 2; !- Zone Equipment 2 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Aux_Gym_ZN_1_FLR_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type Aux_Gym_ZN_1_FLR_1 Direct Air, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Auditorium_ZN_1_FLR_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type Auditorium_ZN_1_FLR_1 Direct Air, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Kitchen_ZN_1_FLR_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme Fan:ZoneExhaust, !- Zone Equipment 1 Object Type Kitchen_ZN_1_FLR_1 Exhaust Fan, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 2 Object Type Kitchen_ZN_1_FLR_1 Direct Air, !- Zone Equipment 2 Name 2, !- Zone Equipment 2 Cooling Sequence 2; !- Zone Equipment 2 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Cafeteria_ZN_1_FLR_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type Cafeteria_ZN_1_FLR_1 Direct Air, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Mech_ZN_1_FLR_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Mech_ZN_1_FLR_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence ZoneHVAC:EquipmentList, Mech_ZN_1_FLR_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Mech_ZN_1_FLR_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1; !- Zone Equipment 1 Heating or No-Load Sequence !- =========== ALL OBJECTS IN CLASS: ZONEHVAC:EQUIPMENTCONNECTIONS =========== ZoneHVAC:EquipmentConnections, Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Zone Name Corner_Class_1_Pod_1_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Corner_Class_1_Pod_1_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Corner_Class_1_Pod_1_ZN_1_FLR_1 Air Node, !- Zone Air Node Name Corner_Class_1_Pod_1_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Zone Name Corner_Class_1_Pod_1_ZN_1_FLR_2 Equipment, !- Zone Conditioning Equipment List Name Corner_Class_1_Pod_1_ZN_1_FLR_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Corner_Class_1_Pod_1_ZN_1_FLR_2 Air Node, !- Zone Air Node Name Corner_Class_1_Pod_1_ZN_1_FLR_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Zone Name Mult_Class_1_Pod_1_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Mult_Class_1_Pod_1_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Mult_Class_1_Pod_1_ZN_1_FLR_1 Air Node, !- Zone Air Node Name Mult_Class_1_Pod_1_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Zone Name Mult_Class_1_Pod_1_ZN_1_FLR_2 Equipment, !- Zone Conditioning Equipment List Name Mult_Class_1_Pod_1_ZN_1_FLR_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Mult_Class_1_Pod_1_ZN_1_FLR_2 Air Node, !- Zone Air Node Name Mult_Class_1_Pod_1_ZN_1_FLR_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Corridor_Pod_1_ZN_1_FLR_1, !- Zone Name Corridor_Pod_1_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Corridor_Pod_1_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Corridor_Pod_1_ZN_1_FLR_1 Air Node, !- Zone Air Node Name Corridor_Pod_1_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Corridor_Pod_1_ZN_1_FLR_2, !- Zone Name Corridor_Pod_1_ZN_1_FLR_2 Equipment, !- Zone Conditioning Equipment List Name Corridor_Pod_1_ZN_1_FLR_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Corridor_Pod_1_ZN_1_FLR_2 Air Node, !- Zone Air Node Name Corridor_Pod_1_ZN_1_FLR_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Zone Name Corner_Class_2_Pod_1_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Corner_Class_2_Pod_1_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Corner_Class_2_Pod_1_ZN_1_FLR_1 Air Node, !- Zone Air Node Name Corner_Class_2_Pod_1_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Zone Name Corner_Class_2_Pod_1_ZN_1_FLR_2 Equipment, !- Zone Conditioning Equipment List Name Corner_Class_2_Pod_1_ZN_1_FLR_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Corner_Class_2_Pod_1_ZN_1_FLR_2 Air Node, !- Zone Air Node Name Corner_Class_2_Pod_1_ZN_1_FLR_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Zone Name Mult_Class_2_Pod_1_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Mult_Class_2_Pod_1_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Mult_Class_2_Pod_1_ZN_1_FLR_1 Air Node, !- Zone Air Node Name Mult_Class_2_Pod_1_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Zone Name Mult_Class_2_Pod_1_ZN_1_FLR_2 Equipment, !- Zone Conditioning Equipment List Name Mult_Class_2_Pod_1_ZN_1_FLR_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Mult_Class_2_Pod_1_ZN_1_FLR_2 Air Node, !- Zone Air Node Name Mult_Class_2_Pod_1_ZN_1_FLR_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Zone Name Corner_Class_1_Pod_2_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Corner_Class_1_Pod_2_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Corner_Class_1_Pod_2_ZN_1_FLR_1 Air Node, !- Zone Air Node Name Corner_Class_1_Pod_2_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Zone Name Corner_Class_1_Pod_2_ZN_1_FLR_2 Equipment, !- Zone Conditioning Equipment List Name Corner_Class_1_Pod_2_ZN_1_FLR_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Corner_Class_1_Pod_2_ZN_1_FLR_2 Air Node, !- Zone Air Node Name Corner_Class_1_Pod_2_ZN_1_FLR_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Zone Name Mult_Class_1_Pod_2_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Mult_Class_1_Pod_2_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Mult_Class_1_Pod_2_ZN_1_FLR_1 Air Node, !- Zone Air Node Name Mult_Class_1_Pod_2_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Zone Name Mult_Class_1_Pod_2_ZN_1_FLR_2 Equipment, !- Zone Conditioning Equipment List Name Mult_Class_1_Pod_2_ZN_1_FLR_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Mult_Class_1_Pod_2_ZN_1_FLR_2 Air Node, !- Zone Air Node Name Mult_Class_1_Pod_2_ZN_1_FLR_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Corridor_Pod_2_ZN_1_FLR_1, !- Zone Name Corridor_Pod_2_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Corridor_Pod_2_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Corridor_Pod_2_ZN_1_FLR_1 Air Node, !- Zone Air Node Name Corridor_Pod_2_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Corridor_Pod_2_ZN_1_FLR_2, !- Zone Name Corridor_Pod_2_ZN_1_FLR_2 Equipment, !- Zone Conditioning Equipment List Name Corridor_Pod_2_ZN_1_FLR_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Corridor_Pod_2_ZN_1_FLR_2 Air Node, !- Zone Air Node Name Corridor_Pod_2_ZN_1_FLR_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Zone Name Corner_Class_2_Pod_2_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Corner_Class_2_Pod_2_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Corner_Class_2_Pod_2_ZN_1_FLR_1 Air Node, !- Zone Air Node Name Corner_Class_2_Pod_2_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Zone Name Corner_Class_2_Pod_2_ZN_1_FLR_2 Equipment, !- Zone Conditioning Equipment List Name Corner_Class_2_Pod_2_ZN_1_FLR_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Corner_Class_2_Pod_2_ZN_1_FLR_2 Air Node, !- Zone Air Node Name Corner_Class_2_Pod_2_ZN_1_FLR_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Zone Name Mult_Class_2_Pod_2_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Mult_Class_2_Pod_2_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Mult_Class_2_Pod_2_ZN_1_FLR_1 Air Node, !- Zone Air Node Name Mult_Class_2_Pod_2_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Zone Name Mult_Class_2_Pod_2_ZN_1_FLR_2 Equipment, !- Zone Conditioning Equipment List Name Mult_Class_2_Pod_2_ZN_1_FLR_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Mult_Class_2_Pod_2_ZN_1_FLR_2 Air Node, !- Zone Air Node Name Mult_Class_2_Pod_2_ZN_1_FLR_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Zone Name Corner_Class_1_Pod_3_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Corner_Class_1_Pod_3_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Corner_Class_1_Pod_3_ZN_1_FLR_1 Air Node, !- Zone Air Node Name Corner_Class_1_Pod_3_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Zone Name Corner_Class_1_Pod_3_ZN_1_FLR_2 Equipment, !- Zone Conditioning Equipment List Name Corner_Class_1_Pod_3_ZN_1_FLR_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Corner_Class_1_Pod_3_ZN_1_FLR_2 Air Node, !- Zone Air Node Name Corner_Class_1_Pod_3_ZN_1_FLR_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Zone Name Mult_Class_1_Pod_3_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Mult_Class_1_Pod_3_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Mult_Class_1_Pod_3_ZN_1_FLR_1 Air Node, !- Zone Air Node Name Mult_Class_1_Pod_3_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Zone Name Mult_Class_1_Pod_3_ZN_1_FLR_2 Equipment, !- Zone Conditioning Equipment List Name Mult_Class_1_Pod_3_ZN_1_FLR_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Mult_Class_1_Pod_3_ZN_1_FLR_2 Air Node, !- Zone Air Node Name Mult_Class_1_Pod_3_ZN_1_FLR_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Corridor_Pod_3_ZN_1_FLR_1, !- Zone Name Corridor_Pod_3_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Corridor_Pod_3_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Corridor_Pod_3_ZN_1_FLR_1 Air Node, !- Zone Air Node Name Corridor_Pod_3_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Corridor_Pod_3_ZN_1_FLR_2, !- Zone Name Corridor_Pod_3_ZN_1_FLR_2 Equipment, !- Zone Conditioning Equipment List Name Corridor_Pod_3_ZN_1_FLR_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Corridor_Pod_3_ZN_1_FLR_2 Air Node, !- Zone Air Node Name Corridor_Pod_3_ZN_1_FLR_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Zone Name Corner_Class_2_Pod_3_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Corner_Class_2_Pod_3_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Corner_Class_2_Pod_3_ZN_1_FLR_1 Air Node, !- Zone Air Node Name Corner_Class_2_Pod_3_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Zone Name Corner_Class_2_Pod_3_ZN_1_FLR_2 Equipment, !- Zone Conditioning Equipment List Name Corner_Class_2_Pod_3_ZN_1_FLR_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Corner_Class_2_Pod_3_ZN_1_FLR_2 Air Node, !- Zone Air Node Name Corner_Class_2_Pod_3_ZN_1_FLR_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Zone Name Mult_Class_2_Pod_3_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Mult_Class_2_Pod_3_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Mult_Class_2_Pod_3_ZN_1_FLR_1 Air Node, !- Zone Air Node Name Mult_Class_2_Pod_3_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Zone Name Mult_Class_2_Pod_3_ZN_1_FLR_2 Equipment, !- Zone Conditioning Equipment List Name Mult_Class_2_Pod_3_ZN_1_FLR_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Mult_Class_2_Pod_3_ZN_1_FLR_2 Air Node, !- Zone Air Node Name Mult_Class_2_Pod_3_ZN_1_FLR_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Main_Corridor_ZN_1_FLR_1,!- Zone Name Main_Corridor_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Main_Corridor_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name Main_Corridor_ZN_1_FLR_1 dummy Exhaust Fan Node, !- Zone Air Exhaust Node or NodeList Name Main_Corridor_ZN_1_FLR_1 Air Node, !- Zone Air Node Name Main_Corridor_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Main_Corridor_ZN_1_FLR_2,!- Zone Name Main_Corridor_ZN_1_FLR_2 Equipment, !- Zone Conditioning Equipment List Name Main_Corridor_ZN_1_FLR_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name Main_Corridor_ZN_1_FLR_2 dummy Exhaust Fan Node, !- Zone Air Exhaust Node or NodeList Name Main_Corridor_ZN_1_FLR_2 Air Node, !- Zone Air Node Name Main_Corridor_ZN_1_FLR_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Lobby_ZN_1_FLR_1, !- Zone Name Lobby_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Lobby_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Lobby_ZN_1_FLR_1 Air Node, !- Zone Air Node Name Lobby_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Lobby_ZN_1_FLR_2, !- Zone Name Lobby_ZN_1_FLR_2 Equipment, !- Zone Conditioning Equipment List Name Lobby_ZN_1_FLR_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Lobby_ZN_1_FLR_2 Air Node, !- Zone Air Node Name Lobby_ZN_1_FLR_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Bathrooms_ZN_1_FLR_1, !- Zone Name Bathrooms_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Bathrooms_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name Bathrooms_ZN_1_FLR_1 Exhaust Nodes, !- Zone Air Exhaust Node or NodeList Name Bathrooms_ZN_1_FLR_1 Air Node, !- Zone Air Node Name Bathrooms_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Bathrooms_ZN_1_FLR_2, !- Zone Name Bathrooms_ZN_1_FLR_2 Equipment, !- Zone Conditioning Equipment List Name Bathrooms_ZN_1_FLR_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name Bathrooms_ZN_1_FLR_2 Exhaust Nodes, !- Zone Air Exhaust Node or NodeList Name Bathrooms_ZN_1_FLR_2 Air Node, !- Zone Air Node Name Bathrooms_ZN_1_FLR_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Offices_ZN_1_FLR_1, !- Zone Name Offices_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Offices_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Offices_ZN_1_FLR_1 Air Node, !- Zone Air Node Name Offices_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Offices_ZN_1_FLR_2, !- Zone Name Offices_ZN_1_FLR_2 Equipment, !- Zone Conditioning Equipment List Name Offices_ZN_1_FLR_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Offices_ZN_1_FLR_2 Air Node, !- Zone Air Node Name Offices_ZN_1_FLR_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Gym_ZN_1_FLR_1, !- Zone Name Gym_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Gym_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name GYM_ZN_1_FLR_1 dummy Exhaust Fan Node, !- Zone Air Exhaust Node or NodeList Name Gym_ZN_1_FLR_1 Air Node, !- Zone Air Node Name Gym_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node Name ZoneHVAC:EquipmentConnections, Aux_Gym_ZN_1_FLR_1, !- Zone Name Aux_Gym_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Aux_Gym_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Aux_Gym_ZN_1_FLR_1 Air Node, !- Zone Air Node Name Aux_Gym_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node Name ZoneHVAC:EquipmentConnections, Auditorium_ZN_1_FLR_1, !- Zone Name Auditorium_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Auditorium_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Auditorium_ZN_1_FLR_1 Air Node, !- Zone Air Node Name Auditorium_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node Name ZoneHVAC:EquipmentConnections, Kitchen_ZN_1_FLR_1, !- Zone Name Kitchen_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Kitchen_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name Kitchen_ZN_1_FLR_1 Exhaust Fan Node, !- Zone Air Exhaust Node or NodeList Name Kitchen_ZN_1_FLR_1 Air Node, !- Zone Air Node Name Kitchen_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node Name ZoneHVAC:EquipmentConnections, LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Zone Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 Equipment, !- Zone Conditioning Equipment List Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 Air Node, !- Zone Air Node Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Cafeteria_ZN_1_FLR_1, !- Zone Name Cafeteria_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Cafeteria_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Cafeteria_ZN_1_FLR_1 Air Node, !- Zone Air Node Name Cafeteria_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node Name ZoneHVAC:EquipmentConnections, Mech_ZN_1_FLR_1, !- Zone Name Mech_ZN_1_FLR_1 Equipment, !- Zone Conditioning Equipment List Name Mech_ZN_1_FLR_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Mech_ZN_1_FLR_1 Air Node,!- Zone Air Node Name Mech_ZN_1_FLR_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Mech_ZN_1_FLR_2, !- Zone Name Mech_ZN_1_FLR_2 Equipment, !- Zone Conditioning Equipment List Name Mech_ZN_1_FLR_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Mech_ZN_1_FLR_2 Air Node,!- Zone Air Node Name Mech_ZN_1_FLR_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name !- =========== ALL OBJECTS IN CLASS: FAN:SYSTEMMODEL =========== Fan:SystemModel, PSZ-AC_1:5_addAQ Fan, !- Name HVACOperationSchd, !- Availability Schedule Name PSZ-AC_1:5_HeatC-PSZ-AC_1:5 FanNode, !- Air Inlet Node Name PSZ-AC_1:5 Supply Equipment Outlet Node, !- Air Outlet Node Name AUTOSIZE, !- Design Maximum Air Flow Rate Discrete, !- Speed Control Method 1, !- Electric Power Minimum Flow Rate Fraction 1018.41, !- Design Pressure Rise {Pa} 0.917, !- Motor Efficiency 1.0, ! Motor In Air Stream Fraction AUTOSIZE, !- Design Electric Power Consumption TotalEfficiencyAndPressure, !- Design Power Sizing Method , !- Electric Power Per Unit Flow Rate , !- Electric Power Per Unit Flow Rate Per Pressure 0.59605, !- Fan Total Efficiency , !- Electric Power Function of Flow Fraction Curve Name 1018.41, !- Night Ventilation Mode Pressure Rise , !- Night Ventilation Mode Flow Fraction , !- Motor Loss Zone Name , !- Motor Loss Radiative Fraction General, !- End-Use Subcategory 2, !- Number of Speeds 0.66, !- Speed Flow Fraction 0.4, !- Electric Power Fraction 1, !- Speed Flow Fraction 1; !- Electric Power Fraction Fan:SystemModel, PSZ-AC_2:6_addAQ Fan, !- Name HVACOperationSchd, !- Availability Schedule Name PSZ-AC_2:6_HeatC-PSZ-AC_2:6 FanNode, !- Air Inlet Node Name PSZ-AC_2:6 Supply Equipment Outlet Node, !- Air Outlet Node Name AUTOSIZE, !- Design Maximum Air Flow Rate Discrete, !- Speed Control Method 1, !- Electric Power Minimum Flow Rate Fraction 622.5, !- Design Pressure Rise {Pa} 0.895, !- Motor Efficiency 1.0, ! Motor In Air Stream Fraction AUTOSIZE, !- Design Electric Power Consumption TotalEfficiencyAndPressure, !- Design Power Sizing Method , !- Electric Power Per Unit Flow Rate , !- Electric Power Per Unit Flow Rate Per Pressure 0.58175, !- Fan Total Efficiency , !- Electric Power Function of Flow Fraction Curve Name 622.5, !- Night Ventilation Mode Pressure Rise , !- Night Ventilation Mode Flow Fraction , !- Motor Loss Zone Name , !- Motor Loss Radiative Fraction General, !- End-Use Subcategory 2, !- Number of Speeds 0.66, !- Speed Flow Fraction 0.4, !- Electric Power Fraction 1, !- Speed Flow Fraction 1; !- Electric Power Fraction Fan:SystemModel, PSZ-AC_3:7_addAQ Fan, !- Name HVACOperationSchd, !- Availability Schedule Name PSZ-AC_3:7_HeatC-PSZ-AC_3:7 FanNode, !- Air Inlet Node Name PSZ-AC_3:7 Supply Equipment Outlet Node, !- Air Outlet Node Name AUTOSIZE, !- Design Maximum Air Flow Rate Discrete, !- Speed Control Method 1, !- Electric Power Minimum Flow Rate Fraction 1018.41, !- Design Pressure Rise {Pa} 0.917, !- Motor Efficiency 1.0, ! Motor In Air Stream Fraction AUTOSIZE, !- Design Electric Power Consumption TotalEfficiencyAndPressure, !- Design Power Sizing Method , !- Electric Power Per Unit Flow Rate , !- Electric Power Per Unit Flow Rate Per Pressure 0.59605, !- Fan Total Efficiency , !- Electric Power Function of Flow Fraction Curve Name 1018.41, !- Night Ventilation Mode Pressure Rise , !- Night Ventilation Mode Flow Fraction , !- Motor Loss Zone Name , !- Motor Loss Radiative Fraction General, !- End-Use Subcategory 2, !- Number of Speeds 0.66, !- Speed Flow Fraction 0.4, !- Electric Power Fraction 1, !- Speed Flow Fraction 1; !- Electric Power Fraction Fan:SystemModel, PSZ-AC_4:8_addAQ Fan, !- Name HVACOperationSchd, !- Availability Schedule Name PSZ-AC_4:8_HeatC-PSZ-AC_4:8 FanNode, !- Air Inlet Node Name PSZ-AC_4:8 Supply Equipment Outlet Node, !- Air Outlet Node Name AUTOSIZE, !- Design Maximum Air Flow Rate Discrete, !- Speed Control Method 1, !- Electric Power Minimum Flow Rate Fraction 622.5, !- Design Pressure Rise {Pa} 0.895, !- Motor Efficiency 1.0, ! Motor In Air Stream Fraction AUTOSIZE, !- Design Electric Power Consumption TotalEfficiencyAndPressure, !- Design Power Sizing Method , !- Electric Power Per Unit Flow Rate , !- Electric Power Per Unit Flow Rate Per Pressure 0.58175, !- Fan Total Efficiency , !- Electric Power Function of Flow Fraction Curve Name 622.5, !- Night Ventilation Mode Pressure Rise , !- Night Ventilation Mode Flow Fraction , !- Motor Loss Zone Name , !- Motor Loss Radiative Fraction General, !- End-Use Subcategory 2, !- Number of Speeds 0.66, !- Speed Flow Fraction 0.4, !- Electric Power Fraction 1, !- Speed Flow Fraction 1; !- Electric Power Fraction Fan:SystemModel, PSZ-AC_5:9_addAQ Fan, !- Name HVACOperationSchd, !- Availability Schedule Name PSZ-AC_5:9_HeatC-PSZ-AC_5:9 FanNode, !- Air Inlet Node Name PSZ-AC_5:9 Supply Equipment Outlet Node, !- Air Outlet Node Name AUTOSIZE, !- Design Maximum Air Flow Rate Discrete, !- Speed Control Method 1, !- Electric Power Minimum Flow Rate Fraction 622.5, !- Design Pressure Rise {Pa} 0.895, !- Motor Efficiency 1.0, ! Motor In Air Stream Fraction AUTOSIZE, !- Design Electric Power Consumption TotalEfficiencyAndPressure, !- Design Power Sizing Method , !- Electric Power Per Unit Flow Rate , !- Electric Power Per Unit Flow Rate Per Pressure 0.58175, !- Fan Total Efficiency , !- Electric Power Function of Flow Fraction Curve Name 622.5, !- Night Ventilation Mode Pressure Rise , !- Night Ventilation Mode Flow Fraction , !- Motor Loss Zone Name , !- Motor Loss Radiative Fraction General, !- End-Use Subcategory 2, !- Number of Speeds 0.66, !- Speed Flow Fraction 0.4, !- Electric Power Fraction 1, !- Speed Flow Fraction 1; !- Electric Power Fraction !- =========== ALL OBJECTS IN CLASS: FAN:VARIABLEVOLUME =========== Fan:VariableVolume, VAV_POD_1 Fan, !- Name HVACOperationSchd, !- Availability Schedule Name 0.6084, !- Fan Total Efficiency 1389.42, !- Pressure Rise {Pa} AUTOSIZE, !- Maximum Flow Rate {m3/s} Fraction, !- Fan Power Minimum Flow Rate Input Method 0.25, !- Fan Power Minimum Flow Fraction , !- Fan Power Minimum Air Flow Rate {m3/s} 0.936, !- Motor Efficiency 1.0, !- Motor In Airstream Fraction 0.0408, !- Fan Power Coefficient 1 0.088, !- Fan Power Coefficient 2 -0.0729, !- Fan Power Coefficient 3 0.9437, !- Fan Power Coefficient 4 0, !- Fan Power Coefficient 5 VAV_POD_1_HeatC-VAV_POD_1 FanNode, !- Air Inlet Node Name VAV_POD_1 Supply Equipment Outlet Node, !- Air Outlet Node Name General; !- End-Use Subcategory Fan:VariableVolume, VAV_POD_2 Fan, !- Name HVACOperationSchd, !- Availability Schedule Name 0.6084, !- Fan Total Efficiency 1389.42, !- Pressure Rise {Pa} AUTOSIZE, !- Maximum Flow Rate {m3/s} Fraction, !- Fan Power Minimum Flow Rate Input Method 0.25, !- Fan Power Minimum Flow Fraction , !- Fan Power Minimum Air Flow Rate {m3/s} 0.936, !- Motor Efficiency 1.0, !- Motor In Airstream Fraction 0.0408, !- Fan Power Coefficient 1 0.088, !- Fan Power Coefficient 2 -0.0729, !- Fan Power Coefficient 3 0.9437, !- Fan Power Coefficient 4 0, !- Fan Power Coefficient 5 VAV_POD_2_HeatC-VAV_POD_2 FanNode, !- Air Inlet Node Name VAV_POD_2 Supply Equipment Outlet Node, !- Air Outlet Node Name General; !- End-Use Subcategory Fan:VariableVolume, VAV_POD_3 Fan, !- Name HVACOperationSchd, !- Availability Schedule Name 0.6084, !- Fan Total Efficiency 1389.42, !- Pressure Rise {Pa} AUTOSIZE, !- Maximum Flow Rate {m3/s} Fraction, !- Fan Power Minimum Flow Rate Input Method 0.25, !- Fan Power Minimum Flow Fraction , !- Fan Power Minimum Air Flow Rate {m3/s} 0.936, !- Motor Efficiency 1.0, !- Motor In Airstream Fraction 0.0408, !- Fan Power Coefficient 1 0.088, !- Fan Power Coefficient 2 -0.0729, !- Fan Power Coefficient 3 0.9437, !- Fan Power Coefficient 4 0, !- Fan Power Coefficient 5 VAV_POD_3_HeatC-VAV_POD_3 FanNode, !- Air Inlet Node Name VAV_POD_3 Supply Equipment Outlet Node, !- Air Outlet Node Name General; !- End-Use Subcategory Fan:VariableVolume, VAV_OTHER Fan, !- Name HVACOperationSchd, !- Availability Schedule Name 0.6084, !- Fan Total Efficiency 1389.42, !- Pressure Rise {Pa} AUTOSIZE, !- Maximum Flow Rate {m3/s} Fraction, !- Fan Power Minimum Flow Rate Input Method 0.25, !- Fan Power Minimum Flow Fraction , !- Fan Power Minimum Air Flow Rate {m3/s} 0.936, !- Motor Efficiency 1.0, !- Motor In Airstream Fraction 0.0408, !- Fan Power Coefficient 1 0.088, !- Fan Power Coefficient 2 -0.0729, !- Fan Power Coefficient 3 0.9437, !- Fan Power Coefficient 4 0, !- Fan Power Coefficient 5 VAV_OTHER_HeatC-VAV_OTHER FanNode, !- Air Inlet Node Name VAV_OTHER Supply Equipment Outlet Node, !- Air Outlet Node Name General; !- End-Use Subcategory !- =========== ALL OBJECTS IN CLASS: FAN:ZONEEXHAUST =========== Fan:ZoneExhaust, Bathrooms_ZN_1_FLR_1 Exhaust Fan, !- Name Hours_of_operation, !- Availability Schedule Name 0.385, !- Fan Total Efficiency 125.0000, !- Pressure Rise {Pa} 0.283168466359586, !- Maximum Flow Rate {m3/s} Bathrooms_ZN_1_FLR_1 Exhaust Fan Node, !- Air Inlet Node Name Bathrooms_ZN_1_FLR_1 Exhaust Fan Outlet Node Name, !- Air Outlet Node Name General, !- End-Use Subcategory , !- Flow Fraction Schedule Name , !- System Availability Manager Coupling Mode , !- Minimum Zone Temperature Limit Schedule Name Bathrooms_ZN_1_FLR_1 Exhaust Fan Balanced Exhaust Fraction Schedule; !- Balanced Exhaust Fraction Schedule Name Schedule:Compact, Bathrooms_ZN_1_FLR_1 Exhaust Fan Balanced Exhaust Fraction Schedule, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay WinterDesignDay, !- Field 2 Until: 07:00,0, !- Field 3 Until: 21:00,1, !- Field 5 Until: 24:00,0, !- Field 7 For: WeekEnds Holidays AllOtherDays, !- Field 9 Until: 24:00,0; !- Field 10 Fan:ZoneExhaust, Main_Corridor_ZN_1_FLR_1 dummy Exhaust Fan, !- Name Hours_of_operation, !- Availability Schedule Name 1, !- Fan Total Efficiency 0.0000001, !- Pressure Rise {Pa} 0.283168466359586, !- Maximum Flow Rate {m3/s} Main_Corridor_ZN_1_FLR_1 dummy Exhaust Fan Node, !- Air Inlet Node Name Main_Corridor_ZN_1_FLR_1 dummy Exhaust Fan Outlet Node Name, !- Air Outlet Node Name General; !- End-Use Subcategory Fan:ZoneExhaust, Bathrooms_ZN_1_FLR_2 Exhaust Fan, !- Name Hours_of_operation, !- Availability Schedule Name 0.385, !- Fan Total Efficiency 125.0000, !- Pressure Rise {Pa} 0.283168466359586, !- Maximum Flow Rate {m3/s} Bathrooms_ZN_1_FLR_2 Exhaust Fan Node, !- Air Inlet Node Name Bathrooms_ZN_1_FLR_2 Exhaust Fan Outlet Node Name, !- Air Outlet Node Name General, !- End-Use Subcategory , !- Flow Fraction Schedule Name , !- System Availability Manager Coupling Mode , !- Minimum Zone Temperature Limit Schedule Name Bathrooms_ZN_1_FLR_2 Exhaust Fan Balanced Exhaust Fraction Schedule; !- Balanced Exhaust Fraction Schedule Name Schedule:Compact, Bathrooms_ZN_1_FLR_2 Exhaust Fan Balanced Exhaust Fraction Schedule, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay WinterDesignDay, !- Field 2 Until: 07:00,0, !- Field 3 Until: 21:00,1, !- Field 5 Until: 24:00,0, !- Field 7 For: WeekEnds Holidays AllOtherDays, !- Field 9 Until: 24:00,0; !- Field 10 Fan:ZoneExhaust, Main_Corridor_ZN_1_FLR_2 dummy Exhaust Fan, !- Name Hours_of_operation, !- Availability Schedule Name 1, !- Fan Total Efficiency 0.0000001, !- Pressure Rise {Pa} 0.283168466359586, !- Maximum Flow Rate {m3/s} Main_Corridor_ZN_1_FLR_2 dummy Exhaust Fan Node, !- Air Inlet Node Name Main_Corridor_ZN_1_FLR_2 dummy Exhaust Fan Outlet Node Name, !- Air Outlet Node Name General; !- End-Use Subcategory Fan:ZoneExhaust, Kitchen_ZN_1_FLR_1 Exhaust Fan, !- Name Kitchen_Exhaust_SCH, !- Availability Schedule Name 0.385, !- Fan Total Efficiency 125.0000, !- Pressure Rise {Pa} 2.54851619723628, !- Maximum Flow Rate {m3/s} Kitchen_ZN_1_FLR_1 Exhaust Fan Node, !- Air Inlet Node Name Kitchen_ZN_1_FLR_1 Exhaust Fan Outlet Node Name, !- Air Outlet Node Name General, !- End-Use Subcategory , !- Flow Fraction Schedule Name , !- System Availability Manager Coupling Mode , !- Minimum Zone Temperature Limit Schedule Name Kitchen_ZN_1_FLR_1 Exhaust Fan Balanced Exhaust Fraction Schedule; !- Balanced Exhaust Fraction Schedule Name Schedule:Compact, Kitchen_ZN_1_FLR_1 Exhaust Fan Balanced Exhaust Fraction Schedule, !- Name Fraction, !- Schedule Type Limits Name Through: 6/30, !- Field 1 For: Weekdays SummerDesignDay WinterDesignDay, !- Field 2 Until: 08:00,0, !- Field 3 Until: 17:00,0.900185185185185, !- Field 5 Until: 24:00,0, !- Field 7 For: WeekEnds Holidays AllOtherDays, !- Field 9 Until: 24:00,0, !- Field 10 Through: 9/1, !- Field 12 For: Weekdays SummerDesignDay WinterDesignDay, !- Field 13 Until: 08:00,0, !- Field 14 Until: 17:00,0.900185185185185, !- Field 16 Until: 21:00,0.900185185185185, !- Field 18 Until: 24:00,0, !- Field 20 For: WeekEnds Holidays AllOtherDays, !- Field 22 Until: 24:00,0, !- Field 23 Through: 12/31, !- Field 25 For: Weekdays SummerDesignDay WinterDesignDay, !- Field 26 Until: 08:00,0, !- Field 27 Until: 16:00,0.900185185185185, !- Field 29 Until: 21:00,0.900185185185185, !- Field 31 Until: 24:00,0, !- Field 33 For: WeekEnds Holidays AllOtherDays, !- Field 35 Until: 24:00,0; !- Field 36 Fan:ZoneExhaust, GYM_ZN_1_FLR_1 dummy Exhaust Fan, !- Name Kitchen_Exhaust_SCH, !- Availability Schedule Name 1, !- Fan Total Efficiency 0.0000001, !- Pressure Rise {Pa} 2.29413652495658, !- Maximum Flow Rate {m3/s} GYM_ZN_1_FLR_1 dummy Exhaust Fan Node, !- Air Inlet Node Name GYM_ZN_1_FLR_1 dummy Exhaust Fan Outlet Node Name, !- Air Outlet Node Name General; !- End-Use Subcategory !- =========== ALL OBJECTS IN CLASS: COIL:COOLING:WATER =========== Coil:Cooling:Water, VAV_POD_1_CoolC, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- Design Water Flow Rate {m3/s} AUTOSIZE, !- Design Air Flow Rate {m3/s} AUTOSIZE, !- Design Inlet Water Temperature {C} AUTOSIZE, !- Design Inlet Air Temperature {C} AUTOSIZE, !- Design Outlet Air Temperature {C} AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir} AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir} VAV_POD_1_CoolCDemand Inlet Node, !- Water Inlet Node Name VAV_POD_1_CoolCDemand Outlet Node, !- Water Outlet Node Name VAV_POD_1_OA-VAV_POD_1_CoolCNode, !- Air Inlet Node Name VAV_POD_1_CoolC-VAV_POD_1_HeatCNode, !- Air Outlet Node Name SimpleAnalysis, !- Type of Analysis CrossFlow; !- Heat Exchanger Configuration Coil:Cooling:Water, VAV_POD_2_CoolC, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- Design Water Flow Rate {m3/s} AUTOSIZE, !- Design Air Flow Rate {m3/s} AUTOSIZE, !- Design Inlet Water Temperature {C} AUTOSIZE, !- Design Inlet Air Temperature {C} AUTOSIZE, !- Design Outlet Air Temperature {C} AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir} AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir} VAV_POD_2_CoolCDemand Inlet Node, !- Water Inlet Node Name VAV_POD_2_CoolCDemand Outlet Node, !- Water Outlet Node Name VAV_POD_2_OA-VAV_POD_2_CoolCNode, !- Air Inlet Node Name VAV_POD_2_CoolC-VAV_POD_2_HeatCNode, !- Air Outlet Node Name SimpleAnalysis, !- Type of Analysis CrossFlow; !- Heat Exchanger Configuration Coil:Cooling:Water, VAV_POD_3_CoolC, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- Design Water Flow Rate {m3/s} AUTOSIZE, !- Design Air Flow Rate {m3/s} AUTOSIZE, !- Design Inlet Water Temperature {C} AUTOSIZE, !- Design Inlet Air Temperature {C} AUTOSIZE, !- Design Outlet Air Temperature {C} AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir} AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir} VAV_POD_3_CoolCDemand Inlet Node, !- Water Inlet Node Name VAV_POD_3_CoolCDemand Outlet Node, !- Water Outlet Node Name VAV_POD_3_OA-VAV_POD_3_CoolCNode, !- Air Inlet Node Name VAV_POD_3_CoolC-VAV_POD_3_HeatCNode, !- Air Outlet Node Name SimpleAnalysis, !- Type of Analysis CrossFlow; !- Heat Exchanger Configuration Coil:Cooling:Water, VAV_OTHER_CoolC, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- Design Water Flow Rate {m3/s} AUTOSIZE, !- Design Air Flow Rate {m3/s} AUTOSIZE, !- Design Inlet Water Temperature {C} AUTOSIZE, !- Design Inlet Air Temperature {C} AUTOSIZE, !- Design Outlet Air Temperature {C} AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir} AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir} VAV_OTHER_CoolCDemand Inlet Node, !- Water Inlet Node Name VAV_OTHER_CoolCDemand Outlet Node, !- Water Outlet Node Name VAV_OTHER_OA-VAV_OTHER_CoolCNode, !- Air Inlet Node Name VAV_OTHER_CoolC-VAV_OTHER_HeatCNode, !- Air Outlet Node Name SimpleAnalysis, !- Type of Analysis CrossFlow; !- Heat Exchanger Configuration !- =========== ALL OBJECTS IN CLASS: COIL:COOLING:DX:SINGLESPEED =========== Coil:Cooling:DX:MultiSpeed, PSZ-AC_1:5_CoolC DXCoil, !- Name ALWAYS_ON, !- Availability Schedule Name PSZ-AC_1:5_OA-PSZ-AC_1:5_CoolCNode, !- Air Inlet Node Name PSZ-AC_1:5_CoolC-PSZ-AC_1:5_HeatCNode, !- Air Outlet Node Name , !- Condenser Air Inlet Node Name AirCooled, !- Condenser Type , !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} , !- Supply Water Storage Tank Name , !- Condensate Collection Water Storage Tank Name No, !- Apply Part Load Fraction to Speeds Greater than 1 No, !- Apply Latent Degradation to Speeds Greater than 1 , !- Crankcase Heater Capacity {W} 10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C} , !- Basin Heater Capacity {W/K} 2, !- Basin Heater Setpoint Temperature {C} , !- Basin Heater Operating Schedule Name Electricity, !- Fuel Type 2, !- Number of Speeds 47667.315, !- Speed 1 Gross Rated Total Cooling Capacity {W} 0.67608, !- Speed 1 Gross Rated Sensible Heat Ratio 3.39928881549157, !- Speed 1 Gross Rated Cooling COP {W/W} 2.55942, !- Speed 1 Rated Air Flow Rate {m3/s} 0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_CapFT, !- Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_CapFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_EIRFT, !- Energy Input Ratio Function of Temperature Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_PLR, !- Part Load Fraction Correlation Curve Name , !- Speed 1 Nominal Time for Condensate Removal to Begin {s} , !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless} , !- Speed 1 Maximum Cycling Rate {cycles/hr} , !- Speed 1 Latent Capacity Time Constant {s} 0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 1 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s} , !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W} 95334.63, !- Speed 2 Gross Rated Total Cooling Capacity {W} 0.67608, !- Speed 2 Gross Rated Sensible Heat Ratio 3.39928881549157, !- Speed 2 Gross Rated Cooling COP {W/W} 3.83913, !- Speed 2 Rated Air Flow Rate {m3/s} 0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_CapFT, !- Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_CapFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_EIRFT, !- Energy Input Ratio Function of Temperature Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_PLR, !- Part Load Fraction Correlation Curve Name , !- Speed 2 Nominal Time for Condensate Removal to Begin {s} , !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless} , !- Speed 2 Maximum Cycling Rate {cycles/hr} , !- Speed 2 Latent Capacity Time Constant {s} 0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 2 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s} ; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W} Coil:Cooling:DX:MultiSpeed, PSZ-AC_2:6_CoolC DXCoil, !- Name ALWAYS_ON, !- Availability Schedule Name PSZ-AC_2:6_OA-PSZ-AC_2:6_CoolCNode, !- Air Inlet Node Name PSZ-AC_2:6_CoolC-PSZ-AC_2:6_HeatCNode, !- Air Outlet Node Name , !- Condenser Air Inlet Node Name AirCooled, !- Condenser Type , !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} , !- Supply Water Storage Tank Name , !- Condensate Collection Water Storage Tank Name No, !- Apply Part Load Fraction to Speeds Greater than 1 No, !- Apply Latent Degradation to Speeds Greater than 1 , !- Crankcase Heater Capacity {W} 10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C} , !- Basin Heater Capacity {W/K} 2, !- Basin Heater Setpoint Temperature {C} , !- Basin Heater Operating Schedule Name Electricity, !- Fuel Type 2, !- Number of Speeds 41945.255, !- Speed 1 Gross Rated Total Cooling Capacity {W} 0.67608, !- Speed 1 Gross Rated Sensible Heat Ratio 3.39928881549157, !- Speed 1 Gross Rated Cooling COP {W/W} 2.25218, !- Speed 1 Rated Air Flow Rate {m3/s} 0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_CapFT, !- Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_CapFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_EIRFT, !- Energy Input Ratio Function of Temperature Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_PLR, !- Part Load Fraction Correlation Curve Name , !- Speed 1 Nominal Time for Condensate Removal to Begin {s} , !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless} , !- Speed 1 Maximum Cycling Rate {cycles/hr} , !- Speed 1 Latent Capacity Time Constant {s} 0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 1 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s} , !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W} 83890.51, !- Speed 2 Gross Rated Total Cooling Capacity {W} 0.67608, !- Speed 2 Gross Rated Sensible Heat Ratio 3.39928881549157, !- Speed 2 Gross Rated Cooling COP {W/W} 3.37827, !- Speed 2 Rated Air Flow Rate {m3/s} 0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_CapFT, !- Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_CapFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_EIRFT, !- Energy Input Ratio Function of Temperature Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_PLR, !- Part Load Fraction Correlation Curve Name , !- Speed 2 Nominal Time for Condensate Removal to Begin {s} , !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless} , !- Speed 2 Maximum Cycling Rate {cycles/hr} , !- Speed 2 Latent Capacity Time Constant {s} 0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 2 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s} ; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W} Coil:Cooling:DX:MultiSpeed, PSZ-AC_3:7_CoolC DXCoil, !- Name ALWAYS_ON, !- Availability Schedule Name PSZ-AC_3:7_OA-PSZ-AC_3:7_CoolCNode, !- Air Inlet Node Name PSZ-AC_3:7_CoolC-PSZ-AC_3:7_HeatCNode, !- Air Outlet Node Name , !- Condenser Air Inlet Node Name AirCooled, !- Condenser Type , !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} , !- Supply Water Storage Tank Name , !- Condensate Collection Water Storage Tank Name No, !- Apply Part Load Fraction to Speeds Greater than 1 No, !- Apply Latent Degradation to Speeds Greater than 1 , !- Crankcase Heater Capacity {W} 10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C} , !- Basin Heater Capacity {W/K} 2, !- Basin Heater Setpoint Temperature {C} , !- Basin Heater Operating Schedule Name Electricity, !- Fuel Type 2, !- Number of Speeds 50473.895, !- Speed 1 Gross Rated Total Cooling Capacity {W} 0.67608, !- Speed 1 Gross Rated Sensible Heat Ratio 3.39928881549157, !- Speed 1 Gross Rated Cooling COP {W/W} 2.71011333333333, !- Speed 1 Rated Air Flow Rate {m3/s} 0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_CapFT, !- Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_CapFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_EIRFT, !- Energy Input Ratio Function of Temperature Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_PLR, !- Part Load Fraction Correlation Curve Name , !- Speed 1 Nominal Time for Condensate Removal to Begin {s} , !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless} , !- Speed 1 Maximum Cycling Rate {cycles/hr} , !- Speed 1 Latent Capacity Time Constant {s} 0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 1 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s} , !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W} 100947.79, !- Speed 2 Gross Rated Total Cooling Capacity {W} 0.67608, !- Speed 2 Gross Rated Sensible Heat Ratio 3.39928881549157, !- Speed 2 Gross Rated Cooling COP {W/W} 4.06517, !- Speed 2 Rated Air Flow Rate {m3/s} 0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_CapFT, !- Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_CapFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_EIRFT, !- Energy Input Ratio Function of Temperature Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_PLR, !- Part Load Fraction Correlation Curve Name , !- Speed 2 Nominal Time for Condensate Removal to Begin {s} , !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless} , !- Speed 2 Maximum Cycling Rate {cycles/hr} , !- Speed 2 Latent Capacity Time Constant {s} 0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 2 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s} ; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W} Coil:Cooling:DX:MultiSpeed, PSZ-AC_4:8_CoolC DXCoil, !- Name ALWAYS_ON, !- Availability Schedule Name PSZ-AC_4:8_OA-PSZ-AC_4:8_CoolCNode, !- Air Inlet Node Name PSZ-AC_4:8_CoolC-PSZ-AC_4:8_HeatCNode, !- Air Outlet Node Name , !- Condenser Air Inlet Node Name AirCooled, !- Condenser Type , !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} , !- Supply Water Storage Tank Name , !- Condensate Collection Water Storage Tank Name No, !- Apply Part Load Fraction to Speeds Greater than 1 No, !- Apply Latent Degradation to Speeds Greater than 1 , !- Crankcase Heater Capacity {W} 10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C} , !- Basin Heater Capacity {W/K} 2, !- Basin Heater Setpoint Temperature {C} , !- Basin Heater Operating Schedule Name Electricity, !- Fuel Type 2, !- Number of Speeds 20394.795, !- Speed 1 Gross Rated Total Cooling Capacity {W} 0.68075, !- Speed 1 Gross Rated Sensible Heat Ratio 3.73224036438218, !- Speed 1 Gross Rated Cooling COP {W/W} 1.11592666666667, !- Speed 1 Rated Air Flow Rate {m3/s} 0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_CapFT, !- Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_CapFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_EIRFT, !- Energy Input Ratio Function of Temperature Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_PLR, !- Part Load Fraction Correlation Curve Name , !- Speed 1 Nominal Time for Condensate Removal to Begin {s} , !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless} , !- Speed 1 Maximum Cycling Rate {cycles/hr} , !- Speed 1 Latent Capacity Time Constant {s} 0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 1 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s} , !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W} 40789.59, !- Speed 2 Gross Rated Total Cooling Capacity {W} 0.68075, !- Speed 2 Gross Rated Sensible Heat Ratio 3.73224036438218, !- Speed 2 Gross Rated Cooling COP {W/W} 1.67389, !- Speed 2 Rated Air Flow Rate {m3/s} 0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_CapFT, !- Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_CapFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_EIRFT, !- Energy Input Ratio Function of Temperature Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_PLR, !- Part Load Fraction Correlation Curve Name , !- Speed 2 Nominal Time for Condensate Removal to Begin {s} , !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless} , !- Speed 2 Maximum Cycling Rate {cycles/hr} , !- Speed 2 Latent Capacity Time Constant {s} 0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 2 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s} ; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W} Coil:Cooling:DX:MultiSpeed, PSZ-AC_5:9_CoolC DXCoil, !- Name ALWAYS_ON, !- Availability Schedule Name PSZ-AC_5:9_OA-PSZ-AC_5:9_CoolCNode, !- Air Inlet Node Name PSZ-AC_5:9_CoolC-PSZ-AC_5:9_HeatCNode, !- Air Outlet Node Name , !- Condenser Air Inlet Node Name AirCooled, !- Condenser Type , !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C} , !- Supply Water Storage Tank Name , !- Condensate Collection Water Storage Tank Name No, !- Apply Part Load Fraction to Speeds Greater than 1 No, !- Apply Latent Degradation to Speeds Greater than 1 , !- Crankcase Heater Capacity {W} 10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C} , !- Basin Heater Capacity {W/K} 2, !- Basin Heater Setpoint Temperature {C} , !- Basin Heater Operating Schedule Name Electricity, !- Fuel Type 2, !- Number of Speeds 36600.955, !- Speed 1 Gross Rated Total Cooling Capacity {W} 0.67608, !- Speed 1 Gross Rated Sensible Heat Ratio 3.39928881549157, !- Speed 1 Gross Rated Cooling COP {W/W} 1.96522666666667, !- Speed 1 Rated Air Flow Rate {m3/s} 0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_CapFT, !- Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_CapFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_EIRFT, !- Energy Input Ratio Function of Temperature Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_PLR, !- Part Load Fraction Correlation Curve Name , !- Speed 1 Nominal Time for Condensate Removal to Begin {s} , !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless} , !- Speed 1 Maximum Cycling Rate {cycles/hr} , !- Speed 1 Latent Capacity Time Constant {s} 0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 1 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s} , !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W} 73201.91, !- Speed 2 Gross Rated Total Cooling Capacity {W} 0.67608, !- Speed 2 Gross Rated Sensible Heat Ratio 3.39928881549157, !- Speed 2 Gross Rated Cooling COP {W/W} 2.94784, !- Speed 2 Rated Air Flow Rate {m3/s} 0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)} PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_CapFT, !- Total Cooling Capacity Function of Temperature Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_CapFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_EIRFT, !- Energy Input Ratio Function of Temperature Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_PLR, !- Part Load Fraction Correlation Curve Name , !- Speed 2 Nominal Time for Condensate Removal to Begin {s} , !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless} , !- Speed 2 Maximum Cycling Rate {cycles/hr} , !- Speed 2 Latent Capacity Time Constant {s} 0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless} , !- Speed 2 Waste Heat Function of Temperature Curve Name 0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless} , !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s} ; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W} !- =========== ALL OBJECTS IN CLASS: COIL:HEATING:WATER =========== Coil:Heating:Water, Corner_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corner_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corner_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corner_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Damper Node, !- Air Inlet Node Name Corner_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Corner_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corner_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corner_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corner_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Damper Node, !- Air Inlet Node Name Corner_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Mult_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Mult_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Mult_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Mult_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Damper Node, !- Air Inlet Node Name Mult_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Mult_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Mult_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Mult_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Mult_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Damper Node, !- Air Inlet Node Name Mult_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Corridor_Pod_1_ZN_1_FLR_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corridor_Pod_1_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corridor_Pod_1_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corridor_Pod_1_ZN_1_FLR_1 VAV Box Damper Node, !- Air Inlet Node Name Corridor_Pod_1_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Corridor_Pod_1_ZN_1_FLR_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corridor_Pod_1_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corridor_Pod_1_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corridor_Pod_1_ZN_1_FLR_2 VAV Box Damper Node, !- Air Inlet Node Name Corridor_Pod_1_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Corner_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corner_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corner_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corner_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Damper Node, !- Air Inlet Node Name Corner_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Corner_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corner_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corner_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corner_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Damper Node, !- Air Inlet Node Name Corner_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Mult_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Mult_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Mult_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Mult_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Damper Node, !- Air Inlet Node Name Mult_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Mult_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Mult_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Mult_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Mult_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Damper Node, !- Air Inlet Node Name Mult_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Corner_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corner_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corner_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corner_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Damper Node, !- Air Inlet Node Name Corner_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Corner_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corner_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corner_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corner_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Damper Node, !- Air Inlet Node Name Corner_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Mult_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Mult_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Mult_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Mult_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Damper Node, !- Air Inlet Node Name Mult_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Mult_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Mult_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Mult_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Mult_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Damper Node, !- Air Inlet Node Name Mult_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Corridor_Pod_2_ZN_1_FLR_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corridor_Pod_2_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corridor_Pod_2_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corridor_Pod_2_ZN_1_FLR_1 VAV Box Damper Node, !- Air Inlet Node Name Corridor_Pod_2_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Corridor_Pod_2_ZN_1_FLR_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corridor_Pod_2_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corridor_Pod_2_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corridor_Pod_2_ZN_1_FLR_2 VAV Box Damper Node, !- Air Inlet Node Name Corridor_Pod_2_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Corner_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corner_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corner_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corner_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Damper Node, !- Air Inlet Node Name Corner_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Corner_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corner_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corner_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corner_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Damper Node, !- Air Inlet Node Name Corner_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Mult_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Mult_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Mult_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Mult_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Damper Node, !- Air Inlet Node Name Mult_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Mult_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Mult_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Mult_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Mult_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Damper Node, !- Air Inlet Node Name Mult_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Corner_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corner_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corner_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corner_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Damper Node, !- Air Inlet Node Name Corner_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Corner_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corner_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corner_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corner_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Damper Node, !- Air Inlet Node Name Corner_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Mult_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Mult_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Mult_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Mult_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Damper Node, !- Air Inlet Node Name Mult_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Mult_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Mult_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Mult_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Mult_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Damper Node, !- Air Inlet Node Name Mult_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Corridor_Pod_3_ZN_1_FLR_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corridor_Pod_3_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corridor_Pod_3_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corridor_Pod_3_ZN_1_FLR_1 VAV Box Damper Node, !- Air Inlet Node Name Corridor_Pod_3_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Corridor_Pod_3_ZN_1_FLR_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corridor_Pod_3_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corridor_Pod_3_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corridor_Pod_3_ZN_1_FLR_2 VAV Box Damper Node, !- Air Inlet Node Name Corridor_Pod_3_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Corner_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corner_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corner_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corner_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Damper Node, !- Air Inlet Node Name Corner_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Corner_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Corner_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Corner_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Corner_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Damper Node, !- Air Inlet Node Name Corner_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Mult_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Mult_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Mult_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Mult_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Damper Node, !- Air Inlet Node Name Mult_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Mult_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Mult_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Mult_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Mult_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Damper Node, !- Air Inlet Node Name Mult_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Main_Corridor_ZN_1_FLR_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Main_Corridor_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Main_Corridor_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Main_Corridor_ZN_1_FLR_1 VAV Box Damper Node, !- Air Inlet Node Name Main_Corridor_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Main_Corridor_ZN_1_FLR_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Main_Corridor_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Main_Corridor_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Main_Corridor_ZN_1_FLR_2 VAV Box Damper Node, !- Air Inlet Node Name Main_Corridor_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Lobby_ZN_1_FLR_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Lobby_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Lobby_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Lobby_ZN_1_FLR_1 VAV Box Damper Node, !- Air Inlet Node Name Lobby_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Lobby_ZN_1_FLR_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Lobby_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Lobby_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Lobby_ZN_1_FLR_2 VAV Box Damper Node, !- Air Inlet Node Name Lobby_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Bathrooms_ZN_1_FLR_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Bathrooms_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Bathrooms_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Bathrooms_ZN_1_FLR_1 VAV Box Damper Node, !- Air Inlet Node Name Bathrooms_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Bathrooms_ZN_1_FLR_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Bathrooms_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Bathrooms_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Bathrooms_ZN_1_FLR_2 VAV Box Damper Node, !- Air Inlet Node Name Bathrooms_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Offices_ZN_1_FLR_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Offices_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Offices_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Offices_ZN_1_FLR_1 VAV Box Damper Node, !- Air Inlet Node Name Offices_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Offices_ZN_1_FLR_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Offices_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Offices_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Offices_ZN_1_FLR_2 VAV Box Damper Node, !- Air Inlet Node Name Offices_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 VAV Box Damper Node, !- Air Inlet Node Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Mech_ZN_1_FLR_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Mech_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Mech_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Mech_ZN_1_FLR_1 VAV Box Damper Node, !- Air Inlet Node Name Mech_ZN_1_FLR_1 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, Mech_ZN_1_FLR_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} Mech_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name Mech_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name Mech_ZN_1_FLR_2 VAV Box Damper Node, !- Air Inlet Node Name Mech_ZN_1_FLR_2 VAV Box Outlet Node Name, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, VAV_POD_1_HeatC, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} VAV_POD_1_HeatCDemand Inlet Node, !- Water Inlet Node Name VAV_POD_1_HeatCDemand Outlet Node, !- Water Outlet Node Name VAV_POD_1_CoolC-VAV_POD_1_HeatCNode, !- Air Inlet Node Name VAV_POD_1_HeatC-VAV_POD_1 FanNode, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, VAV_POD_2_HeatC, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} VAV_POD_2_HeatCDemand Inlet Node, !- Water Inlet Node Name VAV_POD_2_HeatCDemand Outlet Node, !- Water Outlet Node Name VAV_POD_2_CoolC-VAV_POD_2_HeatCNode, !- Air Inlet Node Name VAV_POD_2_HeatC-VAV_POD_2 FanNode, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, VAV_POD_3_HeatC, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} VAV_POD_3_HeatCDemand Inlet Node, !- Water Inlet Node Name VAV_POD_3_HeatCDemand Outlet Node, !- Water Outlet Node Name VAV_POD_3_CoolC-VAV_POD_3_HeatCNode, !- Air Inlet Node Name VAV_POD_3_HeatC-VAV_POD_3 FanNode, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection Coil:Heating:Water, VAV_OTHER_HeatC, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- U-Factor Times Area Value {W/K} AUTOSIZE, !- Maximum Water Flow Rate {m3/s} VAV_OTHER_HeatCDemand Inlet Node, !- Water Inlet Node Name VAV_OTHER_HeatCDemand Outlet Node, !- Water Outlet Node Name VAV_OTHER_CoolC-VAV_OTHER_HeatCNode, !- Air Inlet Node Name VAV_OTHER_HeatC-VAV_OTHER FanNode, !- Air Outlet Node Name UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method AUTOSIZE, !- Rated Capacity {W} 82.2, !- Rated Inlet Water Temperature {C} 12.8, !- Rated Inlet Air Temperature {C} 71.1, !- Rated Outlet Water Temperature {C} 40.0, !- Rated Outlet Air Temperature {C} ; !- Rated Ratio for Air and Water Convection !- =========== ALL OBJECTS IN CLASS: COIL:HEATING:GAS =========== Coil:Heating:Fuel, PSZ-AC_1:5_HeatC, !- Name ALWAYS_ON, !- Availability Schedule Name NaturalGas, !- Fuel Type 0.8, !- Burner Efficiency AUTOSIZE, !- Nominal Capacity {W} PSZ-AC_1:5_CoolC-PSZ-AC_1:5_HeatCNode, !- Air Inlet Node Name PSZ-AC_1:5_HeatC-PSZ-AC_1:5 FanNode, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Heating:Fuel, PSZ-AC_2:6_HeatC, !- Name ALWAYS_ON, !- Availability Schedule Name NaturalGas, !- Fuel Type 0.8, !- Burner Efficiency AUTOSIZE, !- Nominal Capacity {W} PSZ-AC_2:6_CoolC-PSZ-AC_2:6_HeatCNode, !- Air Inlet Node Name PSZ-AC_2:6_HeatC-PSZ-AC_2:6 FanNode, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Heating:Fuel, PSZ-AC_3:7_HeatC, !- Name ALWAYS_ON, !- Availability Schedule Name NaturalGas, !- Fuel Type 0.8, !- Burner Efficiency AUTOSIZE, !- Nominal Capacity {W} PSZ-AC_3:7_CoolC-PSZ-AC_3:7_HeatCNode, !- Air Inlet Node Name PSZ-AC_3:7_HeatC-PSZ-AC_3:7 FanNode, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Heating:Fuel, PSZ-AC_4:8_HeatC, !- Name ALWAYS_ON, !- Availability Schedule Name NaturalGas, !- Fuel Type 0.8, !- Burner Efficiency AUTOSIZE, !- Nominal Capacity {W} PSZ-AC_4:8_CoolC-PSZ-AC_4:8_HeatCNode, !- Air Inlet Node Name PSZ-AC_4:8_HeatC-PSZ-AC_4:8 FanNode, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Heating:Fuel, PSZ-AC_5:9_HeatC, !- Name ALWAYS_ON, !- Availability Schedule Name NaturalGas, !- Fuel Type 0.8, !- Burner Efficiency AUTOSIZE, !- Nominal Capacity {W} PSZ-AC_5:9_CoolC-PSZ-AC_5:9_HeatCNode, !- Air Inlet Node Name PSZ-AC_5:9_HeatC-PSZ-AC_5:9 FanNode, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name !- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:UNITARYSSYSTEM =========== AirLoopHVAC:UnitarySystem, PSZ-AC_1:5_Unitary_Package_DX, !- Name Load, !- Control Type Gym_ZN_1_FLR_1, !- Controlling Zone or Thermostat Location None, !- Dehumidification Control Type ALWAYS_ON, !- Availability Schedule Name PSZ-AC_1:5_OA-PSZ-AC_1:5_CoolCNode, !- Air Inlet Node Name PSZ-AC_1:5 Supply Equipment Outlet Node, !- Air Outlet Node Name Fan:SystemModel, !- Supply Fan Object Type PSZ-AC_1:5_addAQ Fan, !- Supply Fan Name DrawThrough, !- Fan Placement HVACOperationSchd, !- Supply Air Fan Operating Mode Schedule Name Coil:Heating:Fuel, !- Heating Coil Object Type PSZ-AC_1:5_HeatC, !- Heating Coil Name 1, !- DX Heating Coil Sizing Ratio Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type PSZ-AC_1:5_CoolC DXCoil, !- Cooling Coil Name No, !- Use DOAS DX Cooling Coil 2, !- Minimum Supply Air Temperature {C} SensibleOnlyLoadControl, !- Latent Load Control , !- Supplemental Heating Coil Object Type , !- Supplemental Heating Coil Name SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s} , !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- No Load Fraction of Autosized Cooling Supply Air Flow Rate , !- No Load Fraction of Autosized Heating Supply Air Flow Rate , !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W} , !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W} AUTOSIZE, !- Maximum Supply Air Temperature {C} , !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C} , !- Outdoor Dry-Bulb Temperature Sensor Node Name , !- Maximum Cycling Rate {cycles/hr} , !- Heat Pump Time Constant {s} , !- Fraction of On-Cycle Power Use , !- Heat Pump Fan Delay Time {s} , !- Ancillary On-Cycle Electric Power {W} , !- Ancillary Off-Cycle Electric Power {W} , !- Design Heat Recovery Water Flow Rate {m3/s} , !- Maximum Temperature for Heat Recovery {C} , !- Heat Recovery Water Inlet Node Name , !- Heat Recovery Water Outlet Node Name UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type PSZ-AC_1:5_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name UnitarySystemPerformance:Multispeed, PSZ-AC_1:5_Unitary_Package_DX_Perf, !- Name 2, !- Number of Speeds for Heating 2, !- Number of Speeds for Cooling No, !- Single Mode Operation 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 1 Supply Air Flow Ratio 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 2 Supply Air Flow Ratio 1; !- Cooling Speed 2 Supply Air Flow Ratio AirLoopHVAC:UnitarySystem, PSZ-AC_2:6_Unitary_Package_DX, !- Name Load, !- Control Type Aux_Gym_ZN_1_FLR_1, !- Controlling Zone or Thermostat Location None, !- Dehumidification Control Type ALWAYS_ON, !- Availability Schedule Name PSZ-AC_2:6_OA-PSZ-AC_2:6_CoolCNode, !- Air Inlet Node Name PSZ-AC_2:6 Supply Equipment Outlet Node, !- Air Outlet Node Name Fan:SystemModel, !- Supply Fan Object Type PSZ-AC_2:6_addAQ Fan, !- Supply Fan Name DrawThrough, !- Fan Placement HVACOperationSchd, !- Supply Air Fan Operating Mode Schedule Name Coil:Heating:Fuel, !- Heating Coil Object Type PSZ-AC_2:6_HeatC, !- Heating Coil Name 1, !- DX Heating Coil Sizing Ratio Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type PSZ-AC_2:6_CoolC DXCoil, !- Cooling Coil Name No, !- Use DOAS DX Cooling Coil 2, !- Minimum Supply Air Temperature {C} SensibleOnlyLoadControl, !- Latent Load Control , !- Supplemental Heating Coil Object Type , !- Supplemental Heating Coil Name SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s} , !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- No Load Fraction of Autosized Cooling Supply Air Flow Rate , !- No Load Fraction of Autosized Heating Supply Air Flow Rate , !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W} , !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W} AUTOSIZE, !- Maximum Supply Air Temperature {C} , !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C} , !- Outdoor Dry-Bulb Temperature Sensor Node Name , !- Maximum Cycling Rate {cycles/hr} , !- Heat Pump Time Constant {s} , !- Fraction of On-Cycle Power Use , !- Heat Pump Fan Delay Time {s} , !- Ancillary On-Cycle Electric Power {W} , !- Ancillary Off-Cycle Electric Power {W} , !- Design Heat Recovery Water Flow Rate {m3/s} , !- Maximum Temperature for Heat Recovery {C} , !- Heat Recovery Water Inlet Node Name , !- Heat Recovery Water Outlet Node Name UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type PSZ-AC_2:6_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name UnitarySystemPerformance:Multispeed, PSZ-AC_2:6_Unitary_Package_DX_Perf, !- Name 2, !- Number of Speeds for Heating 2, !- Number of Speeds for Cooling No, !- Single Mode Operation 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 1 Supply Air Flow Ratio 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 2 Supply Air Flow Ratio 1; !- Cooling Speed 2 Supply Air Flow Ratio AirLoopHVAC:UnitarySystem, PSZ-AC_3:7_Unitary_Package_DX, !- Name Load, !- Control Type Auditorium_ZN_1_FLR_1, !- Controlling Zone or Thermostat Location None, !- Dehumidification Control Type ALWAYS_ON, !- Availability Schedule Name PSZ-AC_3:7_OA-PSZ-AC_3:7_CoolCNode, !- Air Inlet Node Name PSZ-AC_3:7 Supply Equipment Outlet Node, !- Air Outlet Node Name Fan:SystemModel, !- Supply Fan Object Type PSZ-AC_3:7_addAQ Fan, !- Supply Fan Name DrawThrough, !- Fan Placement HVACOperationSchd, !- Supply Air Fan Operating Mode Schedule Name Coil:Heating:Fuel, !- Heating Coil Object Type PSZ-AC_3:7_HeatC, !- Heating Coil Name 1, !- DX Heating Coil Sizing Ratio Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type PSZ-AC_3:7_CoolC DXCoil, !- Cooling Coil Name No, !- Use DOAS DX Cooling Coil 2, !- Minimum Supply Air Temperature {C} SensibleOnlyLoadControl, !- Latent Load Control , !- Supplemental Heating Coil Object Type , !- Supplemental Heating Coil Name SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s} , !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- No Load Fraction of Autosized Cooling Supply Air Flow Rate , !- No Load Fraction of Autosized Heating Supply Air Flow Rate , !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W} , !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W} AUTOSIZE, !- Maximum Supply Air Temperature {C} , !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C} , !- Outdoor Dry-Bulb Temperature Sensor Node Name , !- Maximum Cycling Rate {cycles/hr} , !- Heat Pump Time Constant {s} , !- Fraction of On-Cycle Power Use , !- Heat Pump Fan Delay Time {s} , !- Ancillary On-Cycle Electric Power {W} , !- Ancillary Off-Cycle Electric Power {W} , !- Design Heat Recovery Water Flow Rate {m3/s} , !- Maximum Temperature for Heat Recovery {C} , !- Heat Recovery Water Inlet Node Name , !- Heat Recovery Water Outlet Node Name UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type PSZ-AC_3:7_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name UnitarySystemPerformance:Multispeed, PSZ-AC_3:7_Unitary_Package_DX_Perf, !- Name 2, !- Number of Speeds for Heating 2, !- Number of Speeds for Cooling No, !- Single Mode Operation 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 1 Supply Air Flow Ratio 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 2 Supply Air Flow Ratio 1; !- Cooling Speed 2 Supply Air Flow Ratio AirLoopHVAC:UnitarySystem, PSZ-AC_4:8_Unitary_Package_DX, !- Name Load, !- Control Type Kitchen_ZN_1_FLR_1, !- Controlling Zone or Thermostat Location None, !- Dehumidification Control Type ALWAYS_ON, !- Availability Schedule Name PSZ-AC_4:8_OA-PSZ-AC_4:8_CoolCNode, !- Air Inlet Node Name PSZ-AC_4:8 Supply Equipment Outlet Node, !- Air Outlet Node Name Fan:SystemModel, !- Supply Fan Object Type PSZ-AC_4:8_addAQ Fan, !- Supply Fan Name DrawThrough, !- Fan Placement HVACOperationSchd, !- Supply Air Fan Operating Mode Schedule Name Coil:Heating:Fuel, !- Heating Coil Object Type PSZ-AC_4:8_HeatC, !- Heating Coil Name 1, !- DX Heating Coil Sizing Ratio Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type PSZ-AC_4:8_CoolC DXCoil, !- Cooling Coil Name No, !- Use DOAS DX Cooling Coil 2, !- Minimum Supply Air Temperature {C} SensibleOnlyLoadControl, !- Latent Load Control , !- Supplemental Heating Coil Object Type , !- Supplemental Heating Coil Name SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s} , !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- No Load Fraction of Autosized Cooling Supply Air Flow Rate , !- No Load Fraction of Autosized Heating Supply Air Flow Rate , !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W} , !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W} AUTOSIZE, !- Maximum Supply Air Temperature {C} , !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C} , !- Outdoor Dry-Bulb Temperature Sensor Node Name , !- Maximum Cycling Rate {cycles/hr} , !- Heat Pump Time Constant {s} , !- Fraction of On-Cycle Power Use , !- Heat Pump Fan Delay Time {s} , !- Ancillary On-Cycle Electric Power {W} , !- Ancillary Off-Cycle Electric Power {W} , !- Design Heat Recovery Water Flow Rate {m3/s} , !- Maximum Temperature for Heat Recovery {C} , !- Heat Recovery Water Inlet Node Name , !- Heat Recovery Water Outlet Node Name UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type PSZ-AC_4:8_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name UnitarySystemPerformance:Multispeed, PSZ-AC_4:8_Unitary_Package_DX_Perf, !- Name 2, !- Number of Speeds for Heating 2, !- Number of Speeds for Cooling No, !- Single Mode Operation 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 1 Supply Air Flow Ratio 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 2 Supply Air Flow Ratio 1; !- Cooling Speed 2 Supply Air Flow Ratio AirLoopHVAC:UnitarySystem, PSZ-AC_5:9_Unitary_Package_DX, !- Name Load, !- Control Type Cafeteria_ZN_1_FLR_1, !- Controlling Zone or Thermostat Location None, !- Dehumidification Control Type ALWAYS_ON, !- Availability Schedule Name PSZ-AC_5:9_OA-PSZ-AC_5:9_CoolCNode, !- Air Inlet Node Name PSZ-AC_5:9 Supply Equipment Outlet Node, !- Air Outlet Node Name Fan:SystemModel, !- Supply Fan Object Type PSZ-AC_5:9_addAQ Fan, !- Supply Fan Name DrawThrough, !- Fan Placement HVACOperationSchd, !- Supply Air Fan Operating Mode Schedule Name Coil:Heating:Fuel, !- Heating Coil Object Type PSZ-AC_5:9_HeatC, !- Heating Coil Name 1, !- DX Heating Coil Sizing Ratio Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type PSZ-AC_5:9_CoolC DXCoil, !- Cooling Coil Name No, !- Use DOAS DX Cooling Coil 2, !- Minimum Supply Air Temperature {C} SensibleOnlyLoadControl, !- Latent Load Control , !- Supplemental Heating Coil Object Type , !- Supplemental Heating Coil Name SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W} SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s} , !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- No Load Fraction of Autosized Cooling Supply Air Flow Rate , !- No Load Fraction of Autosized Heating Supply Air Flow Rate , !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W} , !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W} AUTOSIZE, !- Maximum Supply Air Temperature {C} , !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C} , !- Outdoor Dry-Bulb Temperature Sensor Node Name , !- Maximum Cycling Rate {cycles/hr} , !- Heat Pump Time Constant {s} , !- Fraction of On-Cycle Power Use , !- Heat Pump Fan Delay Time {s} , !- Ancillary On-Cycle Electric Power {W} , !- Ancillary Off-Cycle Electric Power {W} , !- Design Heat Recovery Water Flow Rate {m3/s} , !- Maximum Temperature for Heat Recovery {C} , !- Heat Recovery Water Inlet Node Name , !- Heat Recovery Water Outlet Node Name UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type PSZ-AC_5:9_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name UnitarySystemPerformance:Multispeed, PSZ-AC_5:9_Unitary_Package_DX_Perf, !- Name 2, !- Number of Speeds for Heating 2, !- Number of Speeds for Cooling No, !- Single Mode Operation 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 1 Supply Air Flow Ratio 0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio 1, !- Heating Speed 2 Supply Air Flow Ratio 1; !- Cooling Speed 2 Supply Air Flow Ratio !- =========== ALL OBJECTS IN CLASS: CONTROLLER:WATERCOIL =========== Controller:WaterCoil, VAV_POD_1_CoolC_Controller, !- Name Temperature, !- Control Variable Reverse, !- Action Flow, !- Actuator Variable VAV_POD_1_CoolC-VAV_POD_1_HeatCNode, !- Sensor Node Name VAV_POD_1_CoolCDemand Inlet Node, !- Actuator Node Name , !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_POD_1_HeatC_Controller, !- Name Temperature, !- Control Variable Normal, !- Action Flow, !- Actuator Variable VAV_POD_1_HeatC-VAV_POD_1 FanNode, !- Sensor Node Name VAV_POD_1_HeatCDemand Inlet Node, !- Actuator Node Name 0.0001, !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_POD_2_CoolC_Controller, !- Name Temperature, !- Control Variable Reverse, !- Action Flow, !- Actuator Variable VAV_POD_2_CoolC-VAV_POD_2_HeatCNode, !- Sensor Node Name VAV_POD_2_CoolCDemand Inlet Node, !- Actuator Node Name , !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_POD_2_HeatC_Controller, !- Name Temperature, !- Control Variable Normal, !- Action Flow, !- Actuator Variable VAV_POD_2_HeatC-VAV_POD_2 FanNode, !- Sensor Node Name VAV_POD_2_HeatCDemand Inlet Node, !- Actuator Node Name 0.0001, !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_POD_3_CoolC_Controller, !- Name Temperature, !- Control Variable Reverse, !- Action Flow, !- Actuator Variable VAV_POD_3_CoolC-VAV_POD_3_HeatCNode, !- Sensor Node Name VAV_POD_3_CoolCDemand Inlet Node, !- Actuator Node Name , !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_POD_3_HeatC_Controller, !- Name Temperature, !- Control Variable Normal, !- Action Flow, !- Actuator Variable VAV_POD_3_HeatC-VAV_POD_3 FanNode, !- Sensor Node Name VAV_POD_3_HeatCDemand Inlet Node, !- Actuator Node Name 0.0001, !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_OTHER_CoolC_Controller, !- Name Temperature, !- Control Variable Reverse, !- Action Flow, !- Actuator Variable VAV_OTHER_CoolC-VAV_OTHER_HeatCNode, !- Sensor Node Name VAV_OTHER_CoolCDemand Inlet Node, !- Actuator Node Name , !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} Controller:WaterCoil, VAV_OTHER_HeatC_Controller, !- Name Temperature, !- Control Variable Normal, !- Action Flow, !- Actuator Variable VAV_OTHER_HeatC-VAV_OTHER FanNode, !- Sensor Node Name VAV_OTHER_HeatCDemand Inlet Node, !- Actuator Node Name 0.0001, !- Controller Convergence Tolerance {deltaC} AUTOSIZE, !- Maximum Actuated Flow {m3/s} 0.0; !- Minimum Actuated Flow {m3/s} !- =========== ALL OBJECTS IN CLASS: CONTROLLER:OUTDOORAIR =========== Controller:OutdoorAir, VAV_POD_1_OA_Controller, !- Name VAV_POD_1_OARelief Node, !- Relief Air Outlet Node Name VAV_POD_1 Supply Equipment Inlet Node, !- Return Air Node Name VAV_POD_1_OA-VAV_POD_1_CoolCNode, !- Mixed Air Node Name VAV_POD_1_OAInlet Node, !- Actuator Node Name 0, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type, !- Economizer Control Typ ModulateFlow, !- Economizer Control Action Type , !- Economizer Maximum Limit Dry-Bulb Temperature {C} !- Economizer Maximum Limit Dry-Bulb Temperature {C} , !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name , !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type FixedMinimum, !- Minimum Limit Type MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name , !- Minimum Fraction of Outdoor Air Schedule Name VAV_POD_1 Max OA Fraction, !- Maximum Fraction of Outdoor Air Schedule Name VAV_POD_1_MultiZone, !- Mechanical Ventilation Controller Name , !- Time of Day Economizer Control Schedule Name , !- High Humidity Control , !- Humidistat Control Zone Name , !- High Humidity Outdoor Air Flow Ratio , !- Control High Indoor Humidity Based on Outdoor Humidity Ratio BypassWhenOAFlowGreaterThanMinimum; !- Heat Recovery Bypass Control Type Controller:OutdoorAir, VAV_POD_2_OA_Controller, !- Name VAV_POD_2_OARelief Node, !- Relief Air Outlet Node Name VAV_POD_2 Supply Equipment Inlet Node, !- Return Air Node Name VAV_POD_2_OA-VAV_POD_2_CoolCNode, !- Mixed Air Node Name VAV_POD_2_OAInlet Node, !- Actuator Node Name 0, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type, !- Economizer Control Typ ModulateFlow, !- Economizer Control Action Type , !- Economizer Maximum Limit Dry-Bulb Temperature {C} !- Economizer Maximum Limit Dry-Bulb Temperature {C} , !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name , !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type FixedMinimum, !- Minimum Limit Type MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name , !- Minimum Fraction of Outdoor Air Schedule Name VAV_POD_2 Max OA Fraction, !- Maximum Fraction of Outdoor Air Schedule Name VAV_POD_2_MultiZone, !- Mechanical Ventilation Controller Name , !- Time of Day Economizer Control Schedule Name , !- High Humidity Control , !- Humidistat Control Zone Name , !- High Humidity Outdoor Air Flow Ratio , !- Control High Indoor Humidity Based on Outdoor Humidity Ratio BypassWhenOAFlowGreaterThanMinimum; !- Heat Recovery Bypass Control Type Controller:OutdoorAir, VAV_POD_3_OA_Controller, !- Name VAV_POD_3_OARelief Node, !- Relief Air Outlet Node Name VAV_POD_3 Supply Equipment Inlet Node, !- Return Air Node Name VAV_POD_3_OA-VAV_POD_3_CoolCNode, !- Mixed Air Node Name VAV_POD_3_OAInlet Node, !- Actuator Node Name 0, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type, !- Economizer Control Typ ModulateFlow, !- Economizer Control Action Type , !- Economizer Maximum Limit Dry-Bulb Temperature {C} !- Economizer Maximum Limit Dry-Bulb Temperature {C} !- , !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name , !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type FixedMinimum, !- Minimum Limit Type MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name , !- Minimum Fraction of Outdoor Air Schedule Name VAV_POD_3 Max OA Fraction, !- Maximum Fraction of Outdoor Air Schedule Name VAV_POD_3_MultiZone, !- Mechanical Ventilation Controller Name , !- Time of Day Economizer Control Schedule Name , !- High Humidity Control , !- Humidistat Control Zone Name , !- High Humidity Outdoor Air Flow Ratio , !- Control High Indoor Humidity Based on Outdoor Humidity Ratio BypassWhenOAFlowGreaterThanMinimum; !- Heat Recovery Bypass Control Type Controller:OutdoorAir, VAV_OTHER_OA_Controller, !- Name VAV_OTHER_OARelief Node, !- Relief Air Outlet Node Name VAV_OTHER Supply Equipment Inlet Node, !- Return Air Node Name VAV_OTHER_OA-VAV_OTHER_CoolCNode, !- Mixed Air Node Name VAV_OTHER_OAInlet Node, !- Actuator Node Name 0, !- Minimum Outdoor Air Flow Rate {m3/s} !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type, !- Economizer Control ModulateFlow, !- Economizer Control Action Type , !- Economizer Maximum Limit Dry-Bulb Temperature {C} !- Economizer Maximum Limit Dry-Bulb Temperature {C} , !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name , !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type FixedMinimum, !- Minimum Limit Type MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name , !- Minimum Fraction of Outdoor Air Schedule Name VAV_OTHER Max OA Fraction, !- Maximum Fraction of Outdoor Air Schedule Name VAV_OTHER_MultiZone, !- Mechanical Ventilation Controller Name , !- Time of Day Economizer Control Schedule Name , !- High Humidity Control , !- Humidistat Control Zone Name , !- High Humidity Outdoor Air Flow Ratio , !- Control High Indoor Humidity Based on Outdoor Humidity Ratio BypassWhenOAFlowGreaterThanMinimum; !- Heat Recovery Bypass Control Type Controller:OutdoorAir, PSZ-AC_1:5_OA_Controller, !- Name PSZ-AC_1:5_OARelief Node, !- Relief Air Outlet Node Name PSZ-AC_1:5 Supply Equipment Inlet Node, !- Return Air Node Name PSZ-AC_1:5_OA-PSZ-AC_1:5_CoolCNode, !- Mixed Air Node Name PSZ-AC_1:5_OAInlet Node, !- Actuator Node Name AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type , !- Economizer Maximum Limit Dry-Bulb Temperature {C} , !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name , !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type FixedMinimum, !- Minimum Limit Type MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name , !- Minimum Fraction of Outdoor Air Schedule Name ; !- Maximum Fraction of Outdoor Air Schedule Name Controller:OutdoorAir, PSZ-AC_2:6_OA_Controller,!- Name PSZ-AC_2:6_OARelief Node,!- Relief Air Outlet Node Name PSZ-AC_2:6 Supply Equipment Inlet Node, !- Return Air Node Name PSZ-AC_2:6_OA-PSZ-AC_2:6_CoolCNode, !- Mixed Air Node Name PSZ-AC_2:6_OAInlet Node, !- Actuator Node Name AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type , !- Economizer Maximum Limit Dry-Bulb Temperature {C} , !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name , !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type FixedMinimum, !- Minimum Limit Type MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name , !- Minimum Fraction of Outdoor Air Schedule Name , !- Maximum Fraction of Outdoor Air Schedule Name , !- Mechanical Ventilation Controller Name , !- Time of Day Economizer Control Schedule Name , !- High Humidity Control , !- Humidistat Control Zone Name , !- High Humidity Outdoor Air Flow Ratio , !- Control High Indoor Humidity Based on Outdoor Humidity Ratio BypassWhenOAFlowGreaterThanMinimum; !- Heat Recovery Bypass Control Type Controller:OutdoorAir, PSZ-AC_3:7_OA_Controller,!- Name PSZ-AC_3:7_OARelief Node,!- Relief Air Outlet Node Name PSZ-AC_3:7 Supply Equipment Inlet Node, !- Return Air Node Name PSZ-AC_3:7_OA-PSZ-AC_3:7_CoolCNode, !- Mixed Air Node Name PSZ-AC_3:7_OAInlet Node, !- Actuator Node Name AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type , !- Economizer Maximum Limit Dry-Bulb Temperature {C} , !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name , !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type FixedMinimum, !- Minimum Limit Type MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name, , !- Minimum Fraction of Outdoor Air Schedule Name , !- Maximum Fraction of Outdoor Air Schedule Name , !- Mechanical Ventilation Controller Name , !- Time of Day Economizer Control Schedule Name , !- High Humidity Control , !- Humidistat Control Zone Name , !- High Humidity Outdoor Air Flow Ratio , !- Control High Indoor Humidity Based on Outdoor Humidity Ratio BypassWhenOAFlowGreaterThanMinimum; !- Heat Recovery Bypass Control Type Controller:OutdoorAir, PSZ-AC_4:8_OA_Controller,!- Name PSZ-AC_4:8_OARelief Node,!- Relief Air Outlet Node Name PSZ-AC_4:8 Supply Equipment Inlet Node, !- Return Air Node Name PSZ-AC_4:8_OA-PSZ-AC_4:8_CoolCNode, !- Mixed Air Node Name PSZ-AC_4:8_OAInlet Node, !- Actuator Node Name AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type , !- Economizer Maximum Limit Dry-Bulb Temperature {C} , !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name , !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type FixedMinimum, !- Minimum Limit Type Kitchen_Exhaust_SCH, !- Minimum Outdoor Air Schedule Name , !- Minimum Fraction of Outdoor Air Schedule Name ; !- Maximum Fraction of Outdoor Air Schedule Name Controller:OutdoorAir, PSZ-AC_5:9_OA_Controller,!- Name PSZ-AC_5:9_OARelief Node,!- Relief Air Outlet Node Name PSZ-AC_5:9 Supply Equipment Inlet Node, !- Return Air Node Name PSZ-AC_5:9_OA-PSZ-AC_5:9_CoolCNode, !- Mixed Air Node Name PSZ-AC_5:9_OAInlet Node, !- Actuator Node Name AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type , !- Economizer Maximum Limit Dry-Bulb Temperature {C} , !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name , !- Economizer Minimum Limit Dry-Bulb Temperature {C} LockoutWithHeating, !- Lockout Type FixedMinimum, !- Minimum Limit Type MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name , !- Minimum Fraction of Outdoor Air Schedule Name , !- Maximum Fraction of Outdoor Air Schedule Name , !- Mechanical Ventilation Controller Name , !- Time of Day Economizer Control Schedule Name , !- High Humidity Control , !- Humidistat Control Zone Name , !- High Humidity Outdoor Air Flow Ratio , !- Control High Indoor Humidity Based on Outdoor Humidity Ratio BypassWhenOAFlowGreaterThanMinimum; !- Heat Recovery Bypass Control Type !- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:CONTROLLERLIST =========== AirLoopHVAC:ControllerList, VAV_POD_1_Controllers, !- Name Controller:WaterCoil, !- Controller 1 Object Type VAV_POD_1_CoolC_Controller, !- Controller 1 Name Controller:WaterCoil, !- Controller 2 Object Type VAV_POD_1_HeatC_Controller; !- Controller 2 Name AirLoopHVAC:ControllerList, VAV_POD_1_OA_Controllers,!- Name Controller:OutdoorAir, !- Controller 1 Object Type VAV_POD_1_OA_Controller; !- Controller 1 Name AirLoopHVAC:ControllerList, VAV_POD_2_Controllers, !- Name Controller:WaterCoil, !- Controller 1 Object Type VAV_POD_2_CoolC_Controller, !- Controller 1 Name Controller:WaterCoil, !- Controller 2 Object Type VAV_POD_2_HeatC_Controller; !- Controller 2 Name AirLoopHVAC:ControllerList, VAV_POD_2_OA_Controllers,!- Name Controller:OutdoorAir, !- Controller 1 Object Type VAV_POD_2_OA_Controller; !- Controller 1 Name AirLoopHVAC:ControllerList, VAV_POD_3_Controllers, !- Name Controller:WaterCoil, !- Controller 1 Object Type VAV_POD_3_CoolC_Controller, !- Controller 1 Name Controller:WaterCoil, !- Controller 2 Object Type VAV_POD_3_HeatC_Controller; !- Controller 2 Name AirLoopHVAC:ControllerList, VAV_POD_3_OA_Controllers,!- Name Controller:OutdoorAir, !- Controller 1 Object Type VAV_POD_3_OA_Controller; !- Controller 1 Name AirLoopHVAC:ControllerList, VAV_OTHER_Controllers, !- Name Controller:WaterCoil, !- Controller 1 Object Type VAV_OTHER_CoolC_Controller, !- Controller 1 Name Controller:WaterCoil, !- Controller 2 Object Type VAV_OTHER_HeatC_Controller; !- Controller 2 Name AirLoopHVAC:ControllerList, VAV_OTHER_OA_Controllers,!- Name Controller:OutdoorAir, !- Controller 1 Object Type VAV_OTHER_OA_Controller; !- Controller 1 Name AirLoopHVAC:ControllerList, PSZ-AC_1:5_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type PSZ-AC_1:5_OA_Controller;!- Controller 1 Name AirLoopHVAC:ControllerList, PSZ-AC_2:6_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type PSZ-AC_2:6_OA_Controller;!- Controller 1 Name AirLoopHVAC:ControllerList, PSZ-AC_3:7_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type PSZ-AC_3:7_OA_Controller;!- Controller 1 Name AirLoopHVAC:ControllerList, PSZ-AC_4:8_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type PSZ-AC_4:8_OA_Controller;!- Controller 1 Name AirLoopHVAC:ControllerList, PSZ-AC_5:9_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type PSZ-AC_5:9_OA_Controller;!- Controller 1 Name !- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC =========== AirLoopHVAC, VAV_POD_1, !- Name VAV_POD_1_Controllers, !- Controller List Name VAV_POD_1 Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} VAV_POD_1 Air Loop Branches, !- Branch List Name , !- Connector List Name VAV_POD_1 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name VAV_POD_1 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name VAV_POD_1 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names VAV_POD_1 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names AirLoopHVAC, VAV_POD_2, !- Name VAV_POD_2_Controllers, !- Controller List Name VAV_POD_2 Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} VAV_POD_2 Air Loop Branches, !- Branch List Name , !- Connector List Name VAV_POD_2 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name VAV_POD_2 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name VAV_POD_2 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names VAV_POD_2 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names AirLoopHVAC, VAV_POD_3, !- Name VAV_POD_3_Controllers, !- Controller List Name VAV_POD_3 Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} VAV_POD_3 Air Loop Branches, !- Branch List Name , !- Connector List Name VAV_POD_3 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name VAV_POD_3 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name VAV_POD_3 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names VAV_POD_3 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names AirLoopHVAC, VAV_OTHER, !- Name VAV_OTHER_Controllers, !- Controller List Name VAV_OTHER Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} VAV_OTHER Air Loop Branches, !- Branch List Name , !- Connector List Name VAV_OTHER Supply Equipment Inlet Node, !- Supply Side Inlet Node Name VAV_OTHER Zone Equipment Outlet Node, !- Demand Side Outlet Node Name VAV_OTHER Zone Equipment Inlet Node, !- Demand Side Inlet Node Names VAV_OTHER Supply Equipment Outlet Node; !- Supply Side Outlet Node Names AirLoopHVAC, PSZ-AC_1:5, !- Name , !- Controller List Name PSZ-AC_1:5 Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} PSZ-AC_1:5 Air Loop Branches, !- Branch List Name , !- Connector List Name PSZ-AC_1:5 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name PSZ-AC_1:5 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name PSZ-AC_1:5 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names PSZ-AC_1:5 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names AirLoopHVAC, PSZ-AC_2:6, !- Name , !- Controller List Name PSZ-AC_2:6 Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} PSZ-AC_2:6 Air Loop Branches, !- Branch List Name , !- Connector List Name PSZ-AC_2:6 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name PSZ-AC_2:6 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name PSZ-AC_2:6 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names PSZ-AC_2:6 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names AirLoopHVAC, PSZ-AC_3:7, !- Name , !- Controller List Name PSZ-AC_3:7 Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} PSZ-AC_3:7 Air Loop Branches, !- Branch List Name , !- Connector List Name PSZ-AC_3:7 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name PSZ-AC_3:7 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name PSZ-AC_3:7 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names PSZ-AC_3:7 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names AirLoopHVAC, PSZ-AC_4:8, !- Name , !- Controller List Name PSZ-AC_4:8 Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} PSZ-AC_4:8 Air Loop Branches, !- Branch List Name , !- Connector List Name PSZ-AC_4:8 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name PSZ-AC_4:8 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name PSZ-AC_4:8 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names PSZ-AC_4:8 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names AirLoopHVAC, PSZ-AC_5:9, !- Name , !- Controller List Name PSZ-AC_5:9 Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} PSZ-AC_5:9 Air Loop Branches, !- Branch List Name , !- Connector List Name PSZ-AC_5:9 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name PSZ-AC_5:9 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name PSZ-AC_5:9 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names PSZ-AC_5:9 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names !- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:OUTDOORAIRSYSTEM:EQUIPMENTLIST =========== AirLoopHVAC:OutdoorAirSystem:EquipmentList, VAV_POD_1_OA_Equipment, !- Name HeatExchanger:AirToAir:SensibleAndLatent, !- Component 1 Object Type VAV_POD_1 OA Heat Recovery, !- Component 1 Name OutdoorAir:Mixer, !- Component 2 Object Type VAV_POD_1_OAMixing Box; !- Component 2 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, VAV_Pod_2_OA_Equipment, !- Name HeatExchanger:AirToAir:SensibleAndLatent, !- Component 1 Object Type VAV_Pod_2 OA Heat Recovery, !- Component 1 Name OutdoorAir:Mixer, !- Component 2 Object Type VAV_Pod_2_OAMixing Box; !- Component 2 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, VAV_Pod_3_OA_Equipment, !- Name HeatExchanger:AirToAir:SensibleAndLatent, !- Component 1 Object Type VAV_Pod_3 OA Heat Recovery, !- Component 1 Name OutdoorAir:Mixer, !- Component 2 Object Type VAV_Pod_3_OAMixing Box; !- Component 2 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, VAV_OTHER_OA_Equipment, !- Name HeatExchanger:AirToAir:SensibleAndLatent, !- Component 1 Object Type VAV_OTHER OA Heat Recovery, !- Component 1 Name OutdoorAir:Mixer, !- Component 2 Object Type VAV_OTHER_OAMixing Box; !- Component 2 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, PSZ-AC_1:5_OA_Equipment, !- Name OutdoorAir:Mixer, !- Component 1 Object Type PSZ-AC_1:5_OAMixing Box; !- Component 1 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, PSZ-AC_2:6_OA_Equipment, !- Name HeatExchanger:AirToAir:SensibleAndLatent, !- Component 1 Object Type PSZ-AC_2:6 OA Heat Recovery, !- Component 1 Name OutdoorAir:Mixer, !- Component 2 Object Type PSZ-AC_2:6_OAMixing Box; !- Component 2 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, PSZ-AC_3:7_OA_Equipment, !- Name HeatExchanger:AirToAir:SensibleAndLatent, !- Component 1 Object Type PSZ-AC_3:7 OA Heat Recovery, !- Component 1 Name OutdoorAir:Mixer, !- Component 2 Object Type PSZ-AC_3:7_OAMixing Box; !- Component 2 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, PSZ-AC_4:8_OA_Equipment, !- Name OutdoorAir:Mixer, !- Component 1 Object Type PSZ-AC_4:8_OAMixing Box; !- Component 1 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, PSZ-AC_5:9_OA_Equipment, !- Name HeatExchanger:AirToAir:SensibleAndLatent, !- Component 1 Object Type PSZ-AC_5:9 OA Heat Recovery, !- Component 1 Name OutdoorAir:Mixer, !- Component 2 Object Type PSZ-AC_5:9_OAMixing Box; !- Component 2 Name !- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:OUTDOORAIRSYSTEM =========== AirLoopHVAC:OutdoorAirSystem, VAV_POD_1_OA, !- Name VAV_POD_1_OA_Controllers,!- Controller List Name VAV_POD_1_OA_Equipment, !- Outdoor Air Equipment List Name VAV_POD_1 Availability Manager List; !- Availability Manager List Name AirLoopHVAC:OutdoorAirSystem, VAV_POD_2_OA, !- Name VAV_POD_2_OA_Controllers,!- Controller List Name VAV_POD_2_OA_Equipment, !- Outdoor Air Equipment List Name VAV_POD_2 Availability Manager List; !- Availability Manager List Name AirLoopHVAC:OutdoorAirSystem, VAV_POD_3_OA, !- Name VAV_POD_3_OA_Controllers,!- Controller List Name VAV_POD_3_OA_Equipment, !- Outdoor Air Equipment List Name VAV_POD_3 Availability Manager List; !- Availability Manager List Name AirLoopHVAC:OutdoorAirSystem, VAV_OTHER_OA, !- Name VAV_OTHER_OA_Controllers,!- Controller List Name VAV_OTHER_OA_Equipment, !- Outdoor Air Equipment List Name VAV_OTHER Availability Manager List; !- Availability Manager List Name AirLoopHVAC:OutdoorAirSystem, PSZ-AC_1:5_OA, !- Name PSZ-AC_1:5_OA_Controllers, !- Controller List Name PSZ-AC_1:5_OA_Equipment, !- Outdoor Air Equipment List Name PSZ-AC_1:5 Availability Manager List; !- Availability Manager List Name AirLoopHVAC:OutdoorAirSystem, PSZ-AC_2:6_OA, !- Name PSZ-AC_2:6_OA_Controllers, !- Controller List Name PSZ-AC_2:6_OA_Equipment, !- Outdoor Air Equipment List Name PSZ-AC_2:6 Availability Manager List; !- Availability Manager List Name AirLoopHVAC:OutdoorAirSystem, PSZ-AC_3:7_OA, !- Name PSZ-AC_3:7_OA_Controllers, !- Controller List Name PSZ-AC_3:7_OA_Equipment, !- Outdoor Air Equipment List Name PSZ-AC_3:7 Availability Manager List; !- Availability Manager List Name AirLoopHVAC:OutdoorAirSystem, PSZ-AC_4:8_OA, !- Name PSZ-AC_4:8_OA_Controllers, !- Controller List Name PSZ-AC_4:8_OA_Equipment, !- Outdoor Air Equipment List Name PSZ-AC_4:8 Availability Manager List; !- Availability Manager List Name AirLoopHVAC:OutdoorAirSystem, PSZ-AC_5:9_OA, !- Name PSZ-AC_5:9_OA_Controllers, !- Controller List Name PSZ-AC_5:9_OA_Equipment, !- Outdoor Air Equipment List Name PSZ-AC_5:9 Availability Manager List; !- Availability Manager List Name !- =========== ALL OBJECTS IN CLASS: OUTDOORAIR:MIXER =========== OutdoorAir:Mixer, VAV_POD_1_OAMixing Box, !- Name VAV_POD_1_OA-VAV_POD_1_CoolCNode, !- Mixed Air Node Name VAV_POD_1 Heat Recovery Outlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name !- Outdoor VAV_POD_1_OARelief Node, !- Relief Air Stream Node Name VAV_POD_1 Supply Equipment Inlet Node; !- Return Air Stream Node Name OutdoorAir:Mixer, VAV_POD_2_OAMixing Box, !- Name VAV_POD_2_OA-VAV_POD_2_CoolCNode, !- Mixed Air Node Name VAV_POD_2 Heat Recovery Outlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name !- Outdoor VAV_POD_2_OARelief Node, !- Relief Air Stream Node Name VAV_POD_2 Supply Equipment Inlet Node; !- Return Air Stream Node Name OutdoorAir:Mixer, VAV_POD_3_OAMixing Box, !- Name VAV_POD_3_OA-VAV_POD_3_CoolCNode, !- Mixed Air Node Name VAV_POD_3 Heat Recovery Outlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name !- Outdoor VAV_POD_3_OARelief Node, !- Relief Air Stream Node Name VAV_POD_3 Supply Equipment Inlet Node; !- Return Air Stream Node Name OutdoorAir:Mixer, VAV_OTHER_OAMixing Box, !- Name VAV_OTHER_OA-VAV_OTHER_CoolCNode, !- Mixed Air Node Name VAV_OTHER Heat Recovery Outlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name VAV_OTHER_OARelief Node, !- Relief Air Stream Node Name VAV_OTHER Supply Equipment Inlet Node; !- Return Air Stream Node Name OutdoorAir:Mixer, PSZ-AC_1:5_OAMixing Box, !- Name PSZ-AC_1:5_OA-PSZ-AC_1:5_CoolCNode, !- Mixed Air Node Name PSZ-AC_1:5_OAInlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name !- Outdoor PSZ-AC_1:5_OARelief Node,!- Relief Air Stream Node Name PSZ-AC_1:5 Supply Equipment Inlet Node; !- Return Air Stream Node Name OutdoorAir:Mixer, PSZ-AC_2:6_OAMixing Box, !- Name PSZ-AC_2:6_OA-PSZ-AC_2:6_CoolCNode, !- Mixed Air Node Name PSZ-AC_2:6 Heat Recovery Outlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name !- Outdoor PSZ-AC_2:6_OARelief Node,!- Relief Air Stream Node Name PSZ-AC_2:6 Supply Equipment Inlet Node; !- Return Air Stream Node Name OutdoorAir:Mixer, PSZ-AC_3:7_OAMixing Box, !- Name PSZ-AC_3:7_OA-PSZ-AC_3:7_CoolCNode, !- Mixed Air Node Name PSZ-AC_3:7 Heat Recovery Outlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name !- Outdoor PSZ-AC_3:7_OARelief Node,!- Relief Air Stream Node Name PSZ-AC_3:7 Supply Equipment Inlet Node; !- Return Air Stream Node Name OutdoorAir:Mixer, PSZ-AC_4:8_OAMixing Box, !- Name PSZ-AC_4:8_OA-PSZ-AC_4:8_CoolCNode, !- Mixed Air Node Name PSZ-AC_4:8_OAInlet Node, !- Outdoor Air Stream Node Name PSZ-AC_4:8_OARelief Node,!- Relief Air Stream Node Name PSZ-AC_4:8 Supply Equipment Inlet Node; !- Return Air Stream Node Name OutdoorAir:Mixer, PSZ-AC_5:9_OAMixing Box, !- Name PSZ-AC_5:9_OA-PSZ-AC_5:9_CoolCNode, !- Mixed Air Node Name PSZ-AC_5:9 Heat Recovery Outlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name !- Outdoor PSZ-AC_5:9_OARelief Node,!- Relief Air Stream Node Name PSZ-AC_5:9 Supply Equipment Inlet Node; !- Return Air Stream Node Name !- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:ZONESPLITTER =========== AirLoopHVAC:ZoneSplitter, VAV_POD_1 Supply Air Splitter, !- Name VAV_POD_1 Zone Equipment Inlet Node, !- Inlet Node Name Corner_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Outlet 1 Node Name Corner_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Outlet 2 Node Name Mult_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Outlet 3 Node Name Mult_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Outlet 4 Node Name Corridor_Pod_1_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Outlet 5 Node Name Corridor_Pod_1_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Outlet 6 Node Name Corner_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Outlet 7 Node Name Corner_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Outlet 8 Node Name Mult_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Outlet 9 Node Name Mult_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Inlet Node Name; !- Outlet 10 Node Name AirLoopHVAC:ZoneSplitter, VAV_POD_2 Supply Air Splitter, !- Name VAV_POD_2 Zone Equipment Inlet Node, !- Inlet Node Name Corner_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Outlet 1 Node Name Corner_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Outlet 2 Node Name Mult_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Outlet 3 Node Name Mult_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Outlet 4 Node Name Corridor_Pod_2_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Outlet 5 Node Name Corridor_Pod_2_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Outlet 6 Node Name Corner_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Outlet 7 Node Name Corner_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Outlet 8 Node Name Mult_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Outlet 9 Node Name Mult_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Inlet Node Name; !- Outlet 10 Node Name AirLoopHVAC:ZoneSplitter, VAV_POD_3 Supply Air Splitter, !- Name VAV_POD_3 Zone Equipment Inlet Node, !- Inlet Node Name Corner_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Outlet 1 Node Name Corner_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Outlet 2 Node Name Mult_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Outlet 3 Node Name Mult_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Outlet 4 Node Name Corridor_Pod_3_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Outlet 5 Node Name Corridor_Pod_3_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Outlet 6 Node Name Corner_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Outlet 7 Node Name Corner_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Outlet 8 Node Name Mult_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Outlet 9 Node Name Mult_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Inlet Node Name; !- Outlet 10 Node Name AirLoopHVAC:ZoneSplitter, VAV_OTHER Supply Air Splitter, !- Name VAV_OTHER Zone Equipment Inlet Node, !- Inlet Node Name Main_Corridor_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Outlet 1 Node Name Main_Corridor_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Outlet 2 Node Name Lobby_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Outlet 3 Node Name Lobby_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Outlet 4 Node Name Bathrooms_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Outlet 5 Node Name Bathrooms_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Outlet 6 Node Name Offices_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Outlet 7 Node Name Offices_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Outlet 8 Node Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 VAV Box Inlet Node Name, !- Outlet 9 Node Name Mech_ZN_1_FLR_1 VAV Box Inlet Node Name, !- Outlet 10 Node Name Mech_ZN_1_FLR_2 VAV Box Inlet Node Name; !- Outlet 11 Node Name AirLoopHVAC:ZoneSplitter, PSZ-AC_1:5 Supply Air Splitter, !- Name PSZ-AC_1:5 Zone Equipment Inlet Node, !- Inlet Node Name Gym_ZN_1_FLR_1 Direct Air Inlet Node Name; !- Outlet 1 Node Name AirLoopHVAC:ZoneSplitter, PSZ-AC_2:6 Supply Air Splitter, !- Name PSZ-AC_2:6 Zone Equipment Inlet Node, !- Inlet Node Name Aux_Gym_ZN_1_FLR_1 Direct Air Inlet Node Name; !- Outlet 1 Node Name AirLoopHVAC:ZoneSplitter, PSZ-AC_3:7 Supply Air Splitter, !- Name PSZ-AC_3:7 Zone Equipment Inlet Node, !- Inlet Node Name Auditorium_ZN_1_FLR_1 Direct Air Inlet Node Name; !- Outlet 1 Node Name AirLoopHVAC:ZoneSplitter, PSZ-AC_4:8 Supply Air Splitter, !- Name PSZ-AC_4:8 Zone Equipment Inlet Node, !- Inlet Node Name Kitchen_ZN_1_FLR_1 Direct Air Inlet Node Name; !- Outlet 1 Node Name AirLoopHVAC:ZoneSplitter, PSZ-AC_5:9 Supply Air Splitter, !- Name PSZ-AC_5:9 Zone Equipment Inlet Node, !- Inlet Node Name Cafeteria_ZN_1_FLR_1 Direct Air Inlet Node Name; !- Outlet 1 Node Name !- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:SUPPLYPATH =========== AirLoopHVAC:SupplyPath, VAV_POD_1, !- Name VAV_POD_1 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type VAV_POD_1 Supply Air Splitter; !- Component 1 Name AirLoopHVAC:SupplyPath, VAV_POD_2, !- Name VAV_POD_2 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type VAV_POD_2 Supply Air Splitter; !- Component 1 Name AirLoopHVAC:SupplyPath, VAV_POD_3, !- Name VAV_POD_3 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type VAV_POD_3 Supply Air Splitter; !- Component 1 Name AirLoopHVAC:SupplyPath, VAV_OTHER, !- Name VAV_OTHER Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type VAV_OTHER Supply Air Splitter; !- Component 1 Name AirLoopHVAC:SupplyPath, PSZ-AC_1:5, !- Name PSZ-AC_1:5 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type PSZ-AC_1:5 Supply Air Splitter; !- Component 1 Name AirLoopHVAC:SupplyPath, PSZ-AC_2:6, !- Name PSZ-AC_2:6 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type PSZ-AC_2:6 Supply Air Splitter; !- Component 1 Name AirLoopHVAC:SupplyPath, PSZ-AC_3:7, !- Name PSZ-AC_3:7 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type PSZ-AC_3:7 Supply Air Splitter; !- Component 1 Name AirLoopHVAC:SupplyPath, PSZ-AC_4:8, !- Name PSZ-AC_4:8 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type PSZ-AC_4:8 Supply Air Splitter; !- Component 1 Name AirLoopHVAC:SupplyPath, PSZ-AC_5:9, !- Name PSZ-AC_5:9 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type PSZ-AC_5:9 Supply Air Splitter; !- Component 1 Name !- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:ZONEMIXER =========== AirLoopHVAC:ZoneMixer, VAV_POD_1 Return Air Mixer, !- Name VAV_POD_1 Zone Equipment Outlet Node, !- Outlet Node Name Corner_Class_1_Pod_1_ZN_1_FLR_1 Return Air Node Name, !- Inlet 1 Node Name Corner_Class_1_Pod_1_ZN_1_FLR_2 Return Air Node Name, !- Inlet 2 Node Name Mult_Class_1_Pod_1_ZN_1_FLR_1 Return Air Node Name, !- Inlet 3 Node Name Mult_Class_1_Pod_1_ZN_1_FLR_2 Return Air Node Name, !- Inlet 4 Node Name Corridor_Pod_1_ZN_1_FLR_1 Return Air Node Name, !- Inlet 5 Node Name Corridor_Pod_1_ZN_1_FLR_2 Return Air Node Name, !- Inlet 6 Node Name Corner_Class_2_Pod_1_ZN_1_FLR_1 Return Air Node Name, !- Inlet 7 Node Name Corner_Class_2_Pod_1_ZN_1_FLR_2 Return Air Node Name, !- Inlet 8 Node Name Mult_Class_2_Pod_1_ZN_1_FLR_1 Return Air Node Name, !- Inlet 9 Node Name Mult_Class_2_Pod_1_ZN_1_FLR_2 Return Air Node Name; !- Inlet 10 Node Name AirLoopHVAC:ZoneMixer, VAV_POD_2 Return Air Mixer, !- Name VAV_POD_2 Zone Equipment Outlet Node, !- Outlet Node Name Corner_Class_1_Pod_2_ZN_1_FLR_1 Return Air Node Name, !- Inlet 1 Node Name Corner_Class_1_Pod_2_ZN_1_FLR_2 Return Air Node Name, !- Inlet 2 Node Name Mult_Class_1_Pod_2_ZN_1_FLR_1 Return Air Node Name, !- Inlet 3 Node Name Mult_Class_1_Pod_2_ZN_1_FLR_2 Return Air Node Name, !- Inlet 4 Node Name Corridor_Pod_2_ZN_1_FLR_1 Return Air Node Name, !- Inlet 5 Node Name Corridor_Pod_2_ZN_1_FLR_2 Return Air Node Name, !- Inlet 6 Node Name Corner_Class_2_Pod_2_ZN_1_FLR_1 Return Air Node Name, !- Inlet 7 Node Name Corner_Class_2_Pod_2_ZN_1_FLR_2 Return Air Node Name, !- Inlet 8 Node Name Mult_Class_2_Pod_2_ZN_1_FLR_1 Return Air Node Name, !- Inlet 9 Node Name Mult_Class_2_Pod_2_ZN_1_FLR_2 Return Air Node Name; !- Inlet 10 Node Name AirLoopHVAC:ZoneMixer, VAV_POD_3 Return Air Mixer, !- Name VAV_POD_3 Zone Equipment Outlet Node, !- Outlet Node Name Corner_Class_1_Pod_3_ZN_1_FLR_1 Return Air Node Name, !- Inlet 1 Node Name Corner_Class_1_Pod_3_ZN_1_FLR_2 Return Air Node Name, !- Inlet 2 Node Name Mult_Class_1_Pod_3_ZN_1_FLR_1 Return Air Node Name, !- Inlet 3 Node Name Mult_Class_1_Pod_3_ZN_1_FLR_2 Return Air Node Name, !- Inlet 4 Node Name Corridor_Pod_3_ZN_1_FLR_1 Return Air Node Name, !- Inlet 5 Node Name Corridor_Pod_3_ZN_1_FLR_2 Return Air Node Name, !- Inlet 6 Node Name Corner_Class_2_Pod_3_ZN_1_FLR_1 Return Air Node Name, !- Inlet 7 Node Name Corner_Class_2_Pod_3_ZN_1_FLR_2 Return Air Node Name, !- Inlet 8 Node Name Mult_Class_2_Pod_3_ZN_1_FLR_1 Return Air Node Name, !- Inlet 9 Node Name Mult_Class_2_Pod_3_ZN_1_FLR_2 Return Air Node Name; !- Inlet 10 Node Name AirLoopHVAC:ZoneMixer, VAV_OTHER Return Air Mixer, !- Name VAV_OTHER Zone Equipment Outlet Node, !- Outlet Node Name Main_Corridor_ZN_1_FLR_1 Return Air Node Name, !- Inlet 1 Node Name Main_Corridor_ZN_1_FLR_2 Return Air Node Name, !- Inlet 2 Node Name Lobby_ZN_1_FLR_1 Return Air Node Name, !- Inlet 3 Node Name Lobby_ZN_1_FLR_2 Return Air Node Name, !- Inlet 4 Node Name Bathrooms_ZN_1_FLR_1 Return Air Node Name, !- Inlet 5 Node Name Bathrooms_ZN_1_FLR_2 Return Air Node Name, !- Inlet 6 Node Name Offices_ZN_1_FLR_1 Return Air Node Name, !- Inlet 7 Node Name Offices_ZN_1_FLR_2 Return Air Node Name, !- Inlet 8 Node Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 Return Air Node Name, !- Inlet 9 Node Name Mech_ZN_1_FLR_1 Return Air Node Name, !- Inlet 10 Node Name Mech_ZN_1_FLR_2 Return Air Node Name; !- Inlet 11 Node Name AirLoopHVAC:ZoneMixer, PSZ-AC_1:5 Return Air Mixer, !- Name PSZ-AC_1:5 Zone Equipment Outlet Node, !- Outlet Node Name Gym_ZN_1_FLR_1 Return Air Node Name; !- Inlet 1 Node Name AirLoopHVAC:ZoneMixer, PSZ-AC_2:6 Return Air Mixer, !- Name PSZ-AC_2:6 Zone Equipment Outlet Node, !- Outlet Node Name Aux_Gym_ZN_1_FLR_1 Return Air Node Name; !- Inlet 1 Node Name AirLoopHVAC:ZoneMixer, PSZ-AC_3:7 Return Air Mixer, !- Name PSZ-AC_3:7 Zone Equipment Outlet Node, !- Outlet Node Name Auditorium_ZN_1_FLR_1 Return Air Node Name; !- Inlet 1 Node Name AirLoopHVAC:ZoneMixer, PSZ-AC_4:8 Return Air Mixer, !- Name PSZ-AC_4:8 Zone Equipment Outlet Node, !- Outlet Node Name Kitchen_ZN_1_FLR_1 Return Air Node Name; !- Inlet 1 Node Name AirLoopHVAC:ZoneMixer, PSZ-AC_5:9 Return Air Mixer, !- Name PSZ-AC_5:9 Zone Equipment Outlet Node, !- Outlet Node Name Cafeteria_ZN_1_FLR_1 Return Air Node Name; !- Inlet 1 Node Name !- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:RETURNPATH =========== AirLoopHVAC:ReturnPath, VAV_POD_1 Return Air Path, !- Name VAV_POD_1 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type VAV_POD_1 Return Air Mixer; !- Component 1 Name AirLoopHVAC:ReturnPath, VAV_POD_2 Return Air Path, !- Name VAV_POD_2 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type VAV_POD_2 Return Air Mixer; !- Component 1 Name AirLoopHVAC:ReturnPath, VAV_POD_3 Return Air Path, !- Name VAV_POD_3 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type VAV_POD_3 Return Air Mixer; !- Component 1 Name AirLoopHVAC:ReturnPath, VAV_OTHER Return Air Path, !- Name VAV_OTHER Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type VAV_OTHER Return Air Mixer; !- Component 1 Name AirLoopHVAC:ReturnPath, PSZ-AC_1:5 Return Air Path, !- Name PSZ-AC_1:5 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type PSZ-AC_1:5 Return Air Mixer; !- Component 1 Name AirLoopHVAC:ReturnPath, PSZ-AC_2:6 Return Air Path, !- Name PSZ-AC_2:6 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type PSZ-AC_2:6 Return Air Mixer; !- Component 1 Name AirLoopHVAC:ReturnPath, PSZ-AC_3:7 Return Air Path, !- Name PSZ-AC_3:7 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type PSZ-AC_3:7 Return Air Mixer; !- Component 1 Name AirLoopHVAC:ReturnPath, PSZ-AC_4:8 Return Air Path, !- Name PSZ-AC_4:8 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type PSZ-AC_4:8 Return Air Mixer; !- Component 1 Name AirLoopHVAC:ReturnPath, PSZ-AC_5:9 Return Air Path, !- Name PSZ-AC_5:9 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ZoneMixer, !- Component 1 Object Type PSZ-AC_5:9 Return Air Mixer; !- Component 1 Name !- =========== ALL OBJECTS IN CLASS: BRANCH =========== Branch, VAV_POD_1 Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type VAV_POD_1_OA, !- Component 1 Name VAV_POD_1 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name VAV_POD_1_OA-VAV_POD_1_CoolCNode, !- Component 1 Outlet Node Name Coil:Cooling:Water, !- Component 2 Object Type VAV_POD_1_CoolC, !- Component 2 Name VAV_POD_1_OA-VAV_POD_1_CoolCNode, !- Component 2 Inlet Node Name VAV_POD_1_CoolC-VAV_POD_1_HeatCNode, !- Component 2 Outlet Node Name Coil:Heating:Water, !- Component 3 Object Type VAV_POD_1_HeatC, !- Component 3 Name VAV_POD_1_CoolC-VAV_POD_1_HeatCNode, !- Component 3 Inlet Node Name VAV_POD_1_HeatC-VAV_POD_1 FanNode, !- Component 3 Outlet Node Name Fan:VariableVolume, !- Component 4 Object Type VAV_POD_1 Fan, !- Component 4 Name VAV_POD_1_HeatC-VAV_POD_1 FanNode, !- Component 4 Inlet Node Name VAV_POD_1 Supply Equipment Outlet Node; !- Component 4 Outlet Node Name Branch, VAV_POD_2 Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type VAV_POD_2_OA, !- Component 1 Name VAV_POD_2 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name VAV_POD_2_OA-VAV_POD_2_CoolCNode, !- Component 1 Outlet Node Name Coil:Cooling:Water, !- Component 2 Object Type VAV_POD_2_CoolC, !- Component 2 Name VAV_POD_2_OA-VAV_POD_2_CoolCNode, !- Component 2 Inlet Node Name VAV_POD_2_CoolC-VAV_POD_2_HeatCNode, !- Component 2 Outlet Node Name Coil:Heating:Water, !- Component 3 Object Type VAV_POD_2_HeatC, !- Component 3 Name VAV_POD_2_CoolC-VAV_POD_2_HeatCNode, !- Component 3 Inlet Node Name VAV_POD_2_HeatC-VAV_POD_2 FanNode, !- Component 3 Outlet Node Name Fan:VariableVolume, !- Component 4 Object Type VAV_POD_2 Fan, !- Component 4 Name VAV_POD_2_HeatC-VAV_POD_2 FanNode, !- Component 4 Inlet Node Name VAV_POD_2 Supply Equipment Outlet Node; !- Component 4 Outlet Node Name Branch, VAV_POD_3 Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type VAV_POD_3_OA, !- Component 1 Name VAV_POD_3 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name VAV_POD_3_OA-VAV_POD_3_CoolCNode, !- Component 1 Outlet Node Name Coil:Cooling:Water, !- Component 2 Object Type VAV_POD_3_CoolC, !- Component 2 Name VAV_POD_3_OA-VAV_POD_3_CoolCNode, !- Component 2 Inlet Node Name VAV_POD_3_CoolC-VAV_POD_3_HeatCNode, !- Component 2 Outlet Node Name Coil:Heating:Water, !- Component 3 Object Type VAV_POD_3_HeatC, !- Component 3 Name VAV_POD_3_CoolC-VAV_POD_3_HeatCNode, !- Component 3 Inlet Node Name VAV_POD_3_HeatC-VAV_POD_3 FanNode, !- Component 3 Outlet Node Name Fan:VariableVolume, !- Component 4 Object Type VAV_POD_3 Fan, !- Component 4 Name VAV_POD_3_HeatC-VAV_POD_3 FanNode, !- Component 4 Inlet Node Name VAV_POD_3 Supply Equipment Outlet Node; !- Component 4 Outlet Node Name Branch, VAV_OTHER Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type VAV_OTHER_OA, !- Component 1 Name VAV_OTHER Supply Equipment Inlet Node, !- Component 1 Inlet Node Name VAV_OTHER_OA-VAV_OTHER_CoolCNode, !- Component 1 Outlet Node Name Coil:Cooling:Water, !- Component 2 Object Type VAV_OTHER_CoolC, !- Component 2 Name VAV_OTHER_OA-VAV_OTHER_CoolCNode, !- Component 2 Inlet Node Name VAV_OTHER_CoolC-VAV_OTHER_HeatCNode, !- Component 2 Outlet Node Name Coil:Heating:Water, !- Component 3 Object Type VAV_OTHER_HeatC, !- Component 3 Name VAV_OTHER_CoolC-VAV_OTHER_HeatCNode, !- Component 3 Inlet Node Name VAV_OTHER_HeatC-VAV_OTHER FanNode, !- Component 3 Outlet Node Name Fan:VariableVolume, !- Component 4 Object Type VAV_OTHER Fan, !- Component 4 Name VAV_OTHER_HeatC-VAV_OTHER FanNode, !- Component 4 Inlet Node Name VAV_OTHER Supply Equipment Outlet Node; !- Component 4 Outlet Node Name Branch, PSZ-AC_1:5 Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type PSZ-AC_1:5_OA, !- Component 1 Name PSZ-AC_1:5 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name PSZ-AC_1:5_OA-PSZ-AC_1:5_CoolCNode, !- Component 1 Outlet Node Name AirLoopHVAC:UnitarySystem, !- Component 2 Object Type PSZ-AC_1:5_Unitary_Package_DX, !- Component 2 Name PSZ-AC_1:5_OA-PSZ-AC_1:5_CoolCNode, !- Component 2 Inlet Node Name PSZ-AC_1:5 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name Branch, PSZ-AC_2:6 Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type PSZ-AC_2:6_OA, !- Component 1 Name PSZ-AC_2:6 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name PSZ-AC_2:6_OA-PSZ-AC_2:6_CoolCNode, !- Component 1 Outlet Node Name AirLoopHVAC:UnitarySystem, !- Component 2 Object Type PSZ-AC_2:6_Unitary_Package_DX, !- Component 2 Name PSZ-AC_2:6_OA-PSZ-AC_2:6_CoolCNode, !- Component 2 Inlet Node Name PSZ-AC_2:6 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name Branch, PSZ-AC_3:7 Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type PSZ-AC_3:7_OA, !- Component 1 Name PSZ-AC_3:7 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name PSZ-AC_3:7_OA-PSZ-AC_3:7_CoolCNode, !- Component 1 Outlet Node Name AirLoopHVAC:UnitarySystem, !- Component 2 Object Type PSZ-AC_3:7_Unitary_Package_DX, !- Component 2 Name PSZ-AC_3:7_OA-PSZ-AC_3:7_CoolCNode, !- Component 2 Inlet Node Name PSZ-AC_3:7 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name Branch, PSZ-AC_4:8 Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type PSZ-AC_4:8_OA, !- Component 1 Name PSZ-AC_4:8 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name PSZ-AC_4:8_OA-PSZ-AC_4:8_CoolCNode, !- Component 1 Outlet Node Name AirLoopHVAC:UnitarySystem, !- Component 2 Object Type PSZ-AC_4:8_Unitary_Package_DX, !- Component 2 Name PSZ-AC_4:8_OA-PSZ-AC_4:8_CoolCNode, !- Component 2 Inlet Node Name PSZ-AC_4:8 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name Branch, PSZ-AC_5:9 Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type PSZ-AC_5:9_OA, !- Component 1 Name PSZ-AC_5:9 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name PSZ-AC_5:9_OA-PSZ-AC_5:9_CoolCNode, !- Component 1 Outlet Node Name AirLoopHVAC:UnitarySystem, !- Component 2 Object Type PSZ-AC_5:9_Unitary_Package_DX, !- Component 2 Name PSZ-AC_5:9_OA-PSZ-AC_5:9_CoolCNode, !- Component 2 Inlet Node Name PSZ-AC_5:9 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name Branch, SHWSys1 Supply Inlet Branch, !- Name , !- Pressure Drop Curve Name Pump:ConstantSpeed, !- Component 1 Object Type SHWSys1 Pump, !- Component 1 Name SHWSys1 Supply Inlet Node, !- Component 1 Inlet Node Name SHWSys1 Pump-SHWSys1 Water HeaterNodeviaConnector; !- Component 1 Outlet Node Name Branch, SHWSys1 Supply Equipment Branch, !- Name , !- Pressure Drop Curve Name WaterHeater:Mixed, !- Component 1 Object Type SHWSys1 Water Heater, !- Component 1 Name SHWSys1 Pump-SHWSys1 Water HeaterNode, !- Component 1 Inlet Node Name SHWSys1 Supply Equipment Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Supply Equipment Bypass Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type SHWSys1 Supply Equipment Bypass Pipe, !- Component 1 Name SHWSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name SHWSys1 Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Supply Outlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type SHWSys1 Supply Outlet Pipe, !- Component 1 Name SHWSys1 Supply Mixer-SHWSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name SHWSys1 Supply Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Inlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type SHWSys1 Demand Inlet Pipe, !- Component 1 Name SHWSys1 Demand Inlet Node, !- Component 1 Inlet Node Name SHWSys1 Demand Inlet Pipe-SHWSys1 Demand Mixer; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 1, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Bathrooms_ZN_1_FLR_1 SHW_default, !- Component 1 Name Bathrooms_ZN_1_FLR_1 SHW_default Water Inlet Node, !- Component 1 Inlet Node Name Bathrooms_ZN_1_FLR_1 SHW_default Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 2, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Bathrooms_ZN_1_FLR_2 SHW_default, !- Component 1 Name Bathrooms_ZN_1_FLR_2 SHW_default Water Inlet Node, !- Component 1 Inlet Node Name Bathrooms_ZN_1_FLR_2 SHW_default Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Load Branch 3, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Kitchen_ZN_1_FLR_1 SHW_default, !- Component 1 Name Kitchen_ZN_1_FLR_1 SHW_default Water Inlet Node, !- Component 1 Inlet Node Name Kitchen_ZN_1_FLR_1 SHW_default Water Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Bypass Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type SHWSys1 Demand Bypass Pipe, !- Component 1 Name SHWSys1 Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name SHWSys1 Demand Bypass Pipe Outlet Node; !- Component 1 Outlet Node Name Branch, SHWSys1 Demand Outlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type SHWSys1 Demand Outlet Pipe, !- Component 1 Name SHWSys1 Demand Mixer-SHWSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name SHWSys1 Demand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Supply Inlet Branch, !- Name , !- Pressure Drop Curve Name Pump:VariableSpeed, !- Component 1 Object Type HeatSys1 Pump, !- Component 1 Name HeatSys1 Supply Inlet Node, !- Component 1 Inlet Node Name HeatSys1 Pump-HeatSys1 BoilerNodeviaConnector; !- Component 1 Outlet Node Name Branch, HeatSys1 Supply Equipment Branch, !- Name , !- Pressure Drop Curve Name Boiler:HotWater, !- Component 1 Object Type HeatSys1 Boiler, !- Component 1 Name HeatSys1 Pump-HeatSys1 BoilerNode, !- Component 1 Inlet Node Name HeatSys1 Supply Equipment Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Supply Equipment Bypass Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type HeatSys1 Supply Equipment Bypass Pipe, !- Component 1 Name HeatSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name HeatSys1 Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Supply Outlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type HeatSys1 Supply Outlet Pipe, !- Component 1 Name HeatSys1 Supply Mixer-HeatSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name HeatSys1 Supply Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Inlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type HeatSys1 Demand Inlet Pipe, !- Component 1 Name HeatSys1 Demand Inlet Node, !- Component 1 Inlet Node Name HeatSys1 Demand Inlet Pipe-HeatSys1 Demand Mixer; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 1, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corner_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Reheat Coil, !- Component 1 Name Corner_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corner_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 2, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corner_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Reheat Coil, !- Component 1 Name Corner_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corner_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 3, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Mult_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Reheat Coil, !- Component 1 Name Mult_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Mult_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 4, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Mult_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Reheat Coil, !- Component 1 Name Mult_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Mult_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 5, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corridor_Pod_1_ZN_1_FLR_1 VAV Box Reheat Coil, !- Component 1 Name Corridor_Pod_1_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corridor_Pod_1_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 6, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corridor_Pod_1_ZN_1_FLR_2 VAV Box Reheat Coil, !- Component 1 Name Corridor_Pod_1_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corridor_Pod_1_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 7, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corner_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Reheat Coil, !- Component 1 Name Corner_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corner_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 8, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corner_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Reheat Coil, !- Component 1 Name Corner_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corner_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 9, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Mult_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Reheat Coil, !- Component 1 Name Mult_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Mult_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 10, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Mult_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Reheat Coil, !- Component 1 Name Mult_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Mult_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 11, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corner_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Reheat Coil, !- Component 1 Name Corner_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corner_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 12, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corner_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Reheat Coil, !- Component 1 Name Corner_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corner_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 13, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Mult_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Reheat Coil, !- Component 1 Name Mult_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Mult_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 14, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Mult_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Reheat Coil, !- Component 1 Name Mult_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Mult_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 15, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corridor_Pod_2_ZN_1_FLR_1 VAV Box Reheat Coil, !- Component 1 Name Corridor_Pod_2_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corridor_Pod_2_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 16, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corridor_Pod_2_ZN_1_FLR_2 VAV Box Reheat Coil, !- Component 1 Name Corridor_Pod_2_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corridor_Pod_2_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 17, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corner_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Reheat Coil, !- Component 1 Name Corner_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corner_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 18, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corner_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Reheat Coil, !- Component 1 Name Corner_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corner_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 19, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Mult_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Reheat Coil, !- Component 1 Name Mult_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Mult_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 20, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Mult_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Reheat Coil, !- Component 1 Name Mult_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Mult_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 21, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corner_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Reheat Coil, !- Component 1 Name Corner_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corner_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 22, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corner_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Reheat Coil, !- Component 1 Name Corner_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corner_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 23, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Mult_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Reheat Coil, !- Component 1 Name Mult_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Mult_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 24, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Mult_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Reheat Coil, !- Component 1 Name Mult_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Mult_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 25, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corridor_Pod_3_ZN_1_FLR_1 VAV Box Reheat Coil, !- Component 1 Name Corridor_Pod_3_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corridor_Pod_3_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 26, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corridor_Pod_3_ZN_1_FLR_2 VAV Box Reheat Coil, !- Component 1 Name Corridor_Pod_3_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corridor_Pod_3_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 27, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corner_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Reheat Coil, !- Component 1 Name Corner_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corner_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 28, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Corner_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Reheat Coil, !- Component 1 Name Corner_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Corner_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 29, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Mult_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Reheat Coil, !- Component 1 Name Mult_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Mult_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 30, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Mult_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Reheat Coil, !- Component 1 Name Mult_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Mult_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 31, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Main_Corridor_ZN_1_FLR_1 VAV Box Reheat Coil, !- Component 1 Name Main_Corridor_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Main_Corridor_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 32, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Main_Corridor_ZN_1_FLR_2 VAV Box Reheat Coil, !- Component 1 Name Main_Corridor_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Main_Corridor_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 33, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Lobby_ZN_1_FLR_1 VAV Box Reheat Coil, !- Component 1 Name Lobby_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Lobby_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 34, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Lobby_ZN_1_FLR_2 VAV Box Reheat Coil, !- Component 1 Name Lobby_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Lobby_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 35, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Bathrooms_ZN_1_FLR_1 VAV Box Reheat Coil, !- Component 1 Name Bathrooms_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Bathrooms_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 36, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Bathrooms_ZN_1_FLR_2 VAV Box Reheat Coil, !- Component 1 Name Bathrooms_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Bathrooms_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 37, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Offices_ZN_1_FLR_1 VAV Box Reheat Coil, !- Component 1 Name Offices_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Offices_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 38, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Offices_ZN_1_FLR_2 VAV Box Reheat Coil, !- Component 1 Name Offices_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Offices_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 39, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 VAV Box Reheat Coil, !- Component 1 Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 40, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Mech_ZN_1_FLR_1 VAV Box Reheat Coil, !- Component 1 Name Mech_ZN_1_FLR_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Mech_ZN_1_FLR_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 41, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type Mech_ZN_1_FLR_2 VAV Box Reheat Coil, !- Component 1 Name Mech_ZN_1_FLR_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name Mech_ZN_1_FLR_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 42, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type VAV_POD_1_HeatC, !- Component 1 Name VAV_POD_1_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_POD_1_HeatCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 43, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type VAV_POD_2_HeatC, !- Component 1 Name VAV_POD_2_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_POD_2_HeatCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 44, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type VAV_POD_3_HeatC, !- Component 1 Name VAV_POD_3_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_POD_3_HeatCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Load Branch 45, !- Name , !- Pressure Drop Curve Name Coil:Heating:Water, !- Component 1 Object Type VAV_OTHER_HeatC, !- Component 1 Name VAV_OTHER_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_OTHER_HeatCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Bypass Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type HeatSys1 Demand Bypass Pipe, !- Component 1 Name HeatSys1 Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name HeatSys1 Demand Bypass Pipe Outlet Node; !- Component 1 Outlet Node Name Branch, HeatSys1 Demand Outlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type HeatSys1 Demand Outlet Pipe, !- Component 1 Name HeatSys1 Demand Mixer-HeatSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name HeatSys1 Demand Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Supply Inlet Branch, !- Name , !- Pressure Drop Curve Name Pump:ConstantSpeed, !- Component 1 Object Type CoolSys1 Pump, !- Component 1 Name CoolSys1 Supply Inlet Node, !- Component 1 Inlet Node Name CoolSys1 Pump-CoolSys1 ChillerNodeviaConnector; !- Component 1 Outlet Node Name Branch, CoolSys1 Supply Equipment Branch, !- Name , !- Pressure Drop Curve Name Chiller:Electric:EIR, !- Component 1 Object Type CoolSys1 Chiller, !- Component 1 Name CoolSys1 Pump-CoolSys1 ChillerNode, !- Component 1 Inlet Node Name CoolSys1 Supply Equipment Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Supply Equipment Bypass Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type CoolSys1 Supply Equipment Bypass Pipe, !- Component 1 Name CoolSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name CoolSys1 Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Supply Outlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type CoolSys1 Supply Outlet Pipe, !- Component 1 Name CoolSys1 Supply Mixer-CoolSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name CoolSys1 Supply Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Demand Inlet Branch, !- Name , !- Pressure Drop Curve Name Pump:VariableSpeed, !- Component 1 Object Type CoolSys1 Pump Secondary, !- Component 1 Name CoolSys1 Demand Inlet Node, !- Component 1 Inlet Node Name CoolSys1 Pump Secondary-CoolSys1 Demand Mixer; !- Component 1 Outlet Node Name Branch, CoolSys1 Demand Load Branch 1, !- Name , !- Pressure Drop Curve Name Coil:Cooling:Water, !- Component 1 Object Type VAV_POD_1_CoolC, !- Component 1 Name VAV_POD_1_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_POD_1_CoolCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Demand Load Branch 2, !- Name , !- Pressure Drop Curve Name Coil:Cooling:Water, !- Component 1 Object Type VAV_POD_2_CoolC, !- Component 1 Name VAV_POD_2_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_POD_2_CoolCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Demand Load Branch 3, !- Name , !- Pressure Drop Curve Name Coil:Cooling:Water, !- Component 1 Object Type VAV_POD_3_CoolC, !- Component 1 Name VAV_POD_3_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_POD_3_CoolCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Demand Load Branch 4, !- Name , !- Pressure Drop Curve Name Coil:Cooling:Water, !- Component 1 Object Type VAV_OTHER_CoolC, !- Component 1 Name VAV_OTHER_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name VAV_OTHER_CoolCDemand Outlet Node; !- Component 1 Outlet Node Name Branch, CoolSys1 Demand Outlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type CoolSys1 Demand Outlet Pipe, !- Component 1 Name CoolSys1 Demand Mixer-CoolSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name CoolSys1 Demand Outlet Node; !- Component 1 Outlet Node Name !- =========== ALL OBJECTS IN CLASS: BRANCHLIST =========== BranchList, VAV_POD_1 Air Loop Branches, !- Name VAV_POD_1 Air Loop Main Branch; !- Branch 1 Name BranchList, VAV_POD_2 Air Loop Branches, !- Name VAV_POD_2 Air Loop Main Branch; !- Branch 1 Name BranchList, VAV_POD_3 Air Loop Branches, !- Name VAV_POD_3 Air Loop Main Branch; !- Branch 1 Name BranchList, VAV_OTHER Air Loop Branches, !- Name VAV_OTHER Air Loop Main Branch; !- Branch 1 Name BranchList, PSZ-AC_1:5 Air Loop Branches, !- Name PSZ-AC_1:5 Air Loop Main Branch; !- Branch 1 Name BranchList, PSZ-AC_2:6 Air Loop Branches, !- Name PSZ-AC_2:6 Air Loop Main Branch; !- Branch 1 Name BranchList, PSZ-AC_3:7 Air Loop Branches, !- Name PSZ-AC_3:7 Air Loop Main Branch; !- Branch 1 Name BranchList, PSZ-AC_4:8 Air Loop Branches, !- Name PSZ-AC_4:8 Air Loop Main Branch; !- Branch 1 Name BranchList, PSZ-AC_5:9 Air Loop Branches, !- Name PSZ-AC_5:9 Air Loop Main Branch; !- Branch 1 Name BranchList, SHWSys1 Supply Branches, !- Name SHWSys1 Supply Inlet Branch, !- Branch 1 Name SHWSys1 Supply Equipment Branch, !- Branch 2 Name SHWSys1 Supply Equipment Bypass Branch, !- Branch 3 Name SHWSys1 Supply Outlet Branch; !- Branch 4 Name BranchList, SHWSys1 Demand Branches, !- Name SHWSys1 Demand Inlet Branch, !- Branch 1 Name SHWSys1 Demand Load Branch 1, !- Branch 2 Name SHWSys1 Demand Load Branch 2, !- Branch 3 Name SHWSys1 Demand Load Branch 3, !- Branch 4 Name SHWSys1 Demand Bypass Branch, !- Branch 5 Name SHWSys1 Demand Outlet Branch; !- Branch 6 Name BranchList, HeatSys1 Supply Branches,!- Name HeatSys1 Supply Inlet Branch, !- Branch 1 Name HeatSys1 Supply Equipment Branch, !- Branch 2 Name HeatSys1 Supply Equipment Bypass Branch, !- Branch 3 Name HeatSys1 Supply Outlet Branch; !- Branch 4 Name BranchList, HeatSys1 Demand Branches,!- Name HeatSys1 Demand Inlet Branch, !- Branch 1 Name HeatSys1 Demand Load Branch 1, !- Branch 2 Name HeatSys1 Demand Load Branch 2, !- Branch 3 Name HeatSys1 Demand Load Branch 3, !- Branch 4 Name HeatSys1 Demand Load Branch 4, !- Branch 5 Name HeatSys1 Demand Load Branch 5, !- Branch 6 Name HeatSys1 Demand Load Branch 6, !- Branch 7 Name HeatSys1 Demand Load Branch 7, !- Branch 8 Name HeatSys1 Demand Load Branch 8, !- Branch 9 Name HeatSys1 Demand Load Branch 9, !- Branch 10 Name HeatSys1 Demand Load Branch 10, !- Branch 11 Name HeatSys1 Demand Load Branch 11, !- Branch 12 Name HeatSys1 Demand Load Branch 12, !- Branch 13 Name HeatSys1 Demand Load Branch 13, !- Branch 14 Name HeatSys1 Demand Load Branch 14, !- Branch 15 Name HeatSys1 Demand Load Branch 15, !- Branch 16 Name HeatSys1 Demand Load Branch 16, !- Branch 17 Name HeatSys1 Demand Load Branch 17, !- Branch 18 Name HeatSys1 Demand Load Branch 18, !- Branch 19 Name HeatSys1 Demand Load Branch 19, !- Branch 20 Name HeatSys1 Demand Load Branch 20, !- Branch 21 Name HeatSys1 Demand Load Branch 21, !- Branch 22 Name HeatSys1 Demand Load Branch 22, !- Branch 23 Name HeatSys1 Demand Load Branch 23, !- Branch 24 Name HeatSys1 Demand Load Branch 24, !- Branch 25 Name HeatSys1 Demand Load Branch 25, !- Branch 26 Name HeatSys1 Demand Load Branch 26, !- Branch 27 Name HeatSys1 Demand Load Branch 27, !- Branch 28 Name HeatSys1 Demand Load Branch 28, !- Branch 29 Name HeatSys1 Demand Load Branch 29, !- Branch 30 Name HeatSys1 Demand Load Branch 30, !- Branch 31 Name HeatSys1 Demand Load Branch 31, !- Branch 32 Name HeatSys1 Demand Load Branch 32, !- Branch 33 Name HeatSys1 Demand Load Branch 33, !- Branch 34 Name HeatSys1 Demand Load Branch 34, !- Branch 35 Name HeatSys1 Demand Load Branch 35, !- Branch 36 Name HeatSys1 Demand Load Branch 36, !- Branch 37 Name HeatSys1 Demand Load Branch 37, !- Branch 38 Name HeatSys1 Demand Load Branch 38, !- Branch 39 Name HeatSys1 Demand Load Branch 39, !- Branch 40 Name HeatSys1 Demand Load Branch 40, !- Branch 41 Name HeatSys1 Demand Load Branch 41, !- Branch 42 Name HeatSys1 Demand Load Branch 42, !- Branch 43 Name HeatSys1 Demand Load Branch 43, !- Branch 44 Name HeatSys1 Demand Load Branch 44, !- Branch 45 Name HeatSys1 Demand Load Branch 45, !- Branch 46 Name HeatSys1 Demand Bypass Branch, !- Branch 47 Name HeatSys1 Demand Outlet Branch; !- Branch 48 Name BranchList, CoolSys1 Supply Branches,!- Name CoolSys1 Supply Inlet Branch, !- Branch 1 Name CoolSys1 Supply Equipment Branch, !- Branch 2 Name CoolSys1 Supply Equipment Bypass Branch, !- Branch 3 Name CoolSys1 Supply Outlet Branch; !- Branch 4 Name BranchList, CoolSys1 Demand Branches,!- Name CoolSys1 Demand Inlet Branch, !- Branch 1 Name CoolSys1 Demand Load Branch 1, !- Branch 2 Name CoolSys1 Demand Load Branch 2, !- Branch 3 Name CoolSys1 Demand Load Branch 3, !- Branch 4 Name CoolSys1 Demand Load Branch 4, !- Branch 5 Name CoolSys1 Demand Outlet Branch; !- Branch 6 Name !- =========== ALL OBJECTS IN CLASS: CONNECTOR:SPLITTER =========== Connector:Splitter, SHWSys1 Supply Splitter, !- Name SHWSys1 Supply Inlet Branch, !- Inlet Branch Name SHWSys1 Supply Equipment Branch, !- Outlet Branch 1 Name SHWSys1 Supply Equipment Bypass Branch; !- Outlet Branch 2 Name Connector:Splitter, SHWSys1 Demand Splitter, !- Name SHWSys1 Demand Inlet Branch, !- Inlet Branch Name SHWSys1 Demand Load Branch 1, !- Outlet Branch 1 Name SHWSys1 Demand Load Branch 2, !- Outlet Branch 2 Name SHWSys1 Demand Load Branch 3, !- Outlet Branch 3 Name SHWSys1 Demand Bypass Branch; !- Outlet Branch 4 Name Connector:Splitter, HeatSys1 Supply Splitter,!- Name HeatSys1 Supply Inlet Branch, !- Inlet Branch Name HeatSys1 Supply Equipment Branch, !- Outlet Branch 1 Name HeatSys1 Supply Equipment Bypass Branch; !- Outlet Branch 2 Name Connector:Splitter, HeatSys1 Demand Splitter,!- Name HeatSys1 Demand Inlet Branch, !- Inlet Branch Name HeatSys1 Demand Load Branch 1, !- Outlet Branch 1 Name HeatSys1 Demand Load Branch 2, !- Outlet Branch 2 Name HeatSys1 Demand Load Branch 3, !- Outlet Branch 3 Name HeatSys1 Demand Load Branch 4, !- Outlet Branch 4 Name HeatSys1 Demand Load Branch 5, !- Outlet Branch 5 Name HeatSys1 Demand Load Branch 6, !- Outlet Branch 6 Name HeatSys1 Demand Load Branch 7, !- Outlet Branch 7 Name HeatSys1 Demand Load Branch 8, !- Outlet Branch 8 Name HeatSys1 Demand Load Branch 9, !- Outlet Branch 9 Name HeatSys1 Demand Load Branch 10, !- Outlet Branch 10 Name HeatSys1 Demand Load Branch 11, !- Outlet Branch 11 Name HeatSys1 Demand Load Branch 12, !- Outlet Branch 12 Name HeatSys1 Demand Load Branch 13, !- Outlet Branch 13 Name HeatSys1 Demand Load Branch 14, !- Outlet Branch 14 Name HeatSys1 Demand Load Branch 15, !- Outlet Branch 15 Name HeatSys1 Demand Load Branch 16, !- Outlet Branch 16 Name HeatSys1 Demand Load Branch 17, !- Outlet Branch 17 Name HeatSys1 Demand Load Branch 18, !- Outlet Branch 18 Name HeatSys1 Demand Load Branch 19, !- Outlet Branch 19 Name HeatSys1 Demand Load Branch 20, !- Outlet Branch 20 Name HeatSys1 Demand Load Branch 21, !- Outlet Branch 21 Name HeatSys1 Demand Load Branch 22, !- Outlet Branch 22 Name HeatSys1 Demand Load Branch 23, !- Outlet Branch 23 Name HeatSys1 Demand Load Branch 24, !- Outlet Branch 24 Name HeatSys1 Demand Load Branch 25, !- Outlet Branch 25 Name HeatSys1 Demand Load Branch 26, !- Outlet Branch 26 Name HeatSys1 Demand Load Branch 27, !- Outlet Branch 27 Name HeatSys1 Demand Load Branch 28, !- Outlet Branch 28 Name HeatSys1 Demand Load Branch 29, !- Outlet Branch 29 Name HeatSys1 Demand Load Branch 30, !- Outlet Branch 30 Name HeatSys1 Demand Load Branch 31, !- Outlet Branch 31 Name HeatSys1 Demand Load Branch 32, !- Outlet Branch 32 Name HeatSys1 Demand Load Branch 33, !- Outlet Branch 33 Name HeatSys1 Demand Load Branch 34, !- Outlet Branch 34 Name HeatSys1 Demand Load Branch 35, !- Outlet Branch 35 Name HeatSys1 Demand Load Branch 36, !- Outlet Branch 36 Name HeatSys1 Demand Load Branch 37, !- Outlet Branch 37 Name HeatSys1 Demand Load Branch 38, !- Outlet Branch 38 Name HeatSys1 Demand Load Branch 39, !- Outlet Branch 39 Name HeatSys1 Demand Load Branch 40, !- Outlet Branch 40 Name HeatSys1 Demand Load Branch 41, !- Outlet Branch 41 Name HeatSys1 Demand Load Branch 42, !- Outlet Branch 42 Name HeatSys1 Demand Load Branch 43, !- Outlet Branch 43 Name HeatSys1 Demand Load Branch 44, !- Outlet Branch 44 Name HeatSys1 Demand Load Branch 45, !- Outlet Branch 45 Name HeatSys1 Demand Bypass Branch; !- Outlet Branch 46 Name Connector:Splitter, CoolSys1 Supply Splitter,!- Name CoolSys1 Supply Inlet Branch, !- Inlet Branch Name CoolSys1 Supply Equipment Branch, !- Outlet Branch 1 Name CoolSys1 Supply Equipment Bypass Branch; !- Outlet Branch 2 Name Connector:Splitter, CoolSys1 Demand Splitter,!- Name CoolSys1 Demand Inlet Branch, !- Inlet Branch Name CoolSys1 Demand Load Branch 1, !- Outlet Branch 1 Name CoolSys1 Demand Load Branch 2, !- Outlet Branch 2 Name CoolSys1 Demand Load Branch 3, !- Outlet Branch 3 Name CoolSys1 Demand Load Branch 4; !- Outlet Branch 4 Name !- =========== ALL OBJECTS IN CLASS: CONNECTOR:MIXER =========== Connector:Mixer, SHWSys1 Supply Mixer, !- Name SHWSys1 Supply Outlet Branch, !- Outlet Branch Name SHWSys1 Supply Equipment Branch, !- Inlet Branch 1 Name SHWSys1 Supply Equipment Bypass Branch; !- Inlet Branch 2 Name Connector:Mixer, SHWSys1 Demand Mixer, !- Name SHWSys1 Demand Outlet Branch, !- Outlet Branch Name SHWSys1 Demand Load Branch 1, !- Inlet Branch 1 Name SHWSys1 Demand Load Branch 2, !- Inlet Branch 2 Name SHWSys1 Demand Load Branch 3, !- Inlet Branch 3 Name SHWSys1 Demand Bypass Branch; !- Inlet Branch 4 Name Connector:Mixer, HeatSys1 Supply Mixer, !- Name HeatSys1 Supply Outlet Branch, !- Outlet Branch Name HeatSys1 Supply Equipment Branch, !- Inlet Branch 1 Name HeatSys1 Supply Equipment Bypass Branch; !- Inlet Branch 2 Name Connector:Mixer, HeatSys1 Demand Mixer, !- Name HeatSys1 Demand Outlet Branch, !- Outlet Branch Name HeatSys1 Demand Load Branch 1, !- Inlet Branch 1 Name HeatSys1 Demand Load Branch 2, !- Inlet Branch 2 Name HeatSys1 Demand Load Branch 3, !- Inlet Branch 3 Name HeatSys1 Demand Load Branch 4, !- Inlet Branch 4 Name HeatSys1 Demand Load Branch 5, !- Inlet Branch 5 Name HeatSys1 Demand Load Branch 6, !- Inlet Branch 6 Name HeatSys1 Demand Load Branch 7, !- Inlet Branch 7 Name HeatSys1 Demand Load Branch 8, !- Inlet Branch 8 Name HeatSys1 Demand Load Branch 9, !- Inlet Branch 9 Name HeatSys1 Demand Load Branch 10, !- Inlet Branch 10 Name HeatSys1 Demand Load Branch 11, !- Inlet Branch 11 Name HeatSys1 Demand Load Branch 12, !- Inlet Branch 12 Name HeatSys1 Demand Load Branch 13, !- Inlet Branch 13 Name HeatSys1 Demand Load Branch 14, !- Inlet Branch 14 Name HeatSys1 Demand Load Branch 15, !- Inlet Branch 15 Name HeatSys1 Demand Load Branch 16, !- Inlet Branch 16 Name HeatSys1 Demand Load Branch 17, !- Inlet Branch 17 Name HeatSys1 Demand Load Branch 18, !- Inlet Branch 18 Name HeatSys1 Demand Load Branch 19, !- Inlet Branch 19 Name HeatSys1 Demand Load Branch 20, !- Inlet Branch 20 Name HeatSys1 Demand Load Branch 21, !- Inlet Branch 21 Name HeatSys1 Demand Load Branch 22, !- Inlet Branch 22 Name HeatSys1 Demand Load Branch 23, !- Inlet Branch 23 Name HeatSys1 Demand Load Branch 24, !- Inlet Branch 24 Name HeatSys1 Demand Load Branch 25, !- Inlet Branch 25 Name HeatSys1 Demand Load Branch 26, !- Inlet Branch 26 Name HeatSys1 Demand Load Branch 27, !- Inlet Branch 27 Name HeatSys1 Demand Load Branch 28, !- Inlet Branch 28 Name HeatSys1 Demand Load Branch 29, !- Inlet Branch 29 Name HeatSys1 Demand Load Branch 30, !- Inlet Branch 30 Name HeatSys1 Demand Load Branch 31, !- Inlet Branch 31 Name HeatSys1 Demand Load Branch 32, !- Inlet Branch 32 Name HeatSys1 Demand Load Branch 33, !- Inlet Branch 33 Name HeatSys1 Demand Load Branch 34, !- Inlet Branch 34 Name HeatSys1 Demand Load Branch 35, !- Inlet Branch 35 Name HeatSys1 Demand Load Branch 36, !- Inlet Branch 36 Name HeatSys1 Demand Load Branch 37, !- Inlet Branch 37 Name HeatSys1 Demand Load Branch 38, !- Inlet Branch 38 Name HeatSys1 Demand Load Branch 39, !- Inlet Branch 39 Name HeatSys1 Demand Load Branch 40, !- Inlet Branch 40 Name HeatSys1 Demand Load Branch 41, !- Inlet Branch 41 Name HeatSys1 Demand Load Branch 42, !- Inlet Branch 42 Name HeatSys1 Demand Load Branch 43, !- Inlet Branch 43 Name HeatSys1 Demand Load Branch 44, !- Inlet Branch 44 Name HeatSys1 Demand Load Branch 45, !- Inlet Branch 45 Name HeatSys1 Demand Bypass Branch; !- Inlet Branch 46 Name Connector:Mixer, CoolSys1 Supply Mixer, !- Name CoolSys1 Supply Outlet Branch, !- Outlet Branch Name CoolSys1 Supply Equipment Branch, !- Inlet Branch 1 Name CoolSys1 Supply Equipment Bypass Branch; !- Inlet Branch 2 Name Connector:Mixer, CoolSys1 Demand Mixer, !- Name CoolSys1 Demand Outlet Branch, !- Outlet Branch Name CoolSys1 Demand Load Branch 1, !- Inlet Branch 1 Name CoolSys1 Demand Load Branch 2, !- Inlet Branch 2 Name CoolSys1 Demand Load Branch 3, !- Inlet Branch 3 Name CoolSys1 Demand Load Branch 4; !- Inlet Branch 4 Name !- =========== ALL OBJECTS IN CLASS: CONNECTORLIST =========== ConnectorList, SHWSys1 Supply Connectors, !- Name Connector:Splitter, !- Connector 1 Object Type SHWSys1 Supply Splitter, !- Connector 1 Name Connector:Mixer, !- Connector 2 Object Type SHWSys1 Supply Mixer; !- Connector 2 Name ConnectorList, SHWSys1 Demand Connectors, !- Name Connector:Splitter, !- Connector 1 Object Type SHWSys1 Demand Splitter, !- Connector 1 Name Connector:Mixer, !- Connector 2 Object Type SHWSys1 Demand Mixer; !- Connector 2 Name ConnectorList, HeatSys1 Supply Connectors, !- Name Connector:Splitter, !- Connector 1 Object Type HeatSys1 Supply Splitter,!- Connector 1 Name Connector:Mixer, !- Connector 2 Object Type HeatSys1 Supply Mixer; !- Connector 2 Name ConnectorList, HeatSys1 Demand Connectors, !- Name Connector:Splitter, !- Connector 1 Object Type HeatSys1 Demand Splitter,!- Connector 1 Name Connector:Mixer, !- Connector 2 Object Type HeatSys1 Demand Mixer; !- Connector 2 Name ConnectorList, CoolSys1 Supply Connectors, !- Name Connector:Splitter, !- Connector 1 Object Type CoolSys1 Supply Splitter,!- Connector 1 Name Connector:Mixer, !- Connector 2 Object Type CoolSys1 Supply Mixer; !- Connector 2 Name ConnectorList, CoolSys1 Demand Connectors, !- Name Connector:Splitter, !- Connector 1 Object Type CoolSys1 Demand Splitter,!- Connector 1 Name Connector:Mixer, !- Connector 2 Object Type CoolSys1 Demand Mixer; !- Connector 2 Name !- =========== ALL OBJECTS IN CLASS: NODELIST =========== NodeList, Corner_Class_1_Pod_1_ZN_1_FLR_1 Inlet Nodes, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Corner_Class_1_Pod_1_ZN_1_FLR_2 Inlet Nodes, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Mult_Class_1_Pod_1_ZN_1_FLR_1 Inlet Nodes, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_1 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Mult_Class_1_Pod_1_ZN_1_FLR_2 Inlet Nodes, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_2 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Corridor_Pod_1_ZN_1_FLR_1 Inlet Nodes, !- Name Corridor_Pod_1_ZN_1_FLR_1 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Corridor_Pod_1_ZN_1_FLR_2 Inlet Nodes, !- Name Corridor_Pod_1_ZN_1_FLR_2 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Corner_Class_2_Pod_1_ZN_1_FLR_1 Inlet Nodes, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Corner_Class_2_Pod_1_ZN_1_FLR_2 Inlet Nodes, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Mult_Class_2_Pod_1_ZN_1_FLR_1 Inlet Nodes, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_1 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Mult_Class_2_Pod_1_ZN_1_FLR_2 Inlet Nodes, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_2 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Corner_Class_1_Pod_2_ZN_1_FLR_1 Inlet Nodes, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Corner_Class_1_Pod_2_ZN_1_FLR_2 Inlet Nodes, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Mult_Class_1_Pod_2_ZN_1_FLR_1 Inlet Nodes, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_1 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Mult_Class_1_Pod_2_ZN_1_FLR_2 Inlet Nodes, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_2 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Corridor_Pod_2_ZN_1_FLR_1 Inlet Nodes, !- Name Corridor_Pod_2_ZN_1_FLR_1 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Corridor_Pod_2_ZN_1_FLR_2 Inlet Nodes, !- Name Corridor_Pod_2_ZN_1_FLR_2 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Corner_Class_2_Pod_2_ZN_1_FLR_1 Inlet Nodes, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Corner_Class_2_Pod_2_ZN_1_FLR_2 Inlet Nodes, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Mult_Class_2_Pod_2_ZN_1_FLR_1 Inlet Nodes, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_1 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Mult_Class_2_Pod_2_ZN_1_FLR_2 Inlet Nodes, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_2 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Corner_Class_1_Pod_3_ZN_1_FLR_1 Inlet Nodes, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Corner_Class_1_Pod_3_ZN_1_FLR_2 Inlet Nodes, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Mult_Class_1_Pod_3_ZN_1_FLR_1 Inlet Nodes, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_1 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Mult_Class_1_Pod_3_ZN_1_FLR_2 Inlet Nodes, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_2 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Corridor_Pod_3_ZN_1_FLR_1 Inlet Nodes, !- Name Corridor_Pod_3_ZN_1_FLR_1 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Corridor_Pod_3_ZN_1_FLR_2 Inlet Nodes, !- Name Corridor_Pod_3_ZN_1_FLR_2 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Corner_Class_2_Pod_3_ZN_1_FLR_1 Inlet Nodes, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Corner_Class_2_Pod_3_ZN_1_FLR_2 Inlet Nodes, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Mult_Class_2_Pod_3_ZN_1_FLR_1 Inlet Nodes, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_1 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Mult_Class_2_Pod_3_ZN_1_FLR_2 Inlet Nodes, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_2 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Main_Corridor_ZN_1_FLR_1 Inlet Nodes, !- Name Main_Corridor_ZN_1_FLR_1 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Main_Corridor_ZN_1_FLR_2 Inlet Nodes, !- Name Main_Corridor_ZN_1_FLR_2 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Lobby_ZN_1_FLR_1 Inlet Nodes, !- Name Lobby_ZN_1_FLR_1 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Lobby_ZN_1_FLR_2 Inlet Nodes, !- Name Lobby_ZN_1_FLR_2 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Bathrooms_ZN_1_FLR_1 Inlet Nodes, !- Name Bathrooms_ZN_1_FLR_1 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Bathrooms_ZN_1_FLR_1 Exhaust Nodes, !- Name Bathrooms_ZN_1_FLR_1 Exhaust Fan Node; !- Node 1 Name NodeList, Bathrooms_ZN_1_FLR_2 Inlet Nodes, !- Name Bathrooms_ZN_1_FLR_2 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Bathrooms_ZN_1_FLR_2 Exhaust Nodes, !- Name Bathrooms_ZN_1_FLR_2 Exhaust Fan Node; !- Node 1 Name NodeList, Offices_ZN_1_FLR_1 Inlet Nodes, !- Name Offices_ZN_1_FLR_1 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Offices_ZN_1_FLR_2 Inlet Nodes, !- Name Offices_ZN_1_FLR_2 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Gym_ZN_1_FLR_1 Inlet Nodes, !- Name Gym_ZN_1_FLR_1 Direct Air Inlet Node Name; !- Node 1 Name NodeList, Aux_Gym_ZN_1_FLR_1 Inlet Nodes, !- Name Aux_Gym_ZN_1_FLR_1 Direct Air Inlet Node Name; !- Node 1 Name NodeList, Auditorium_ZN_1_FLR_1 Inlet Nodes, !- Name Auditorium_ZN_1_FLR_1 Direct Air Inlet Node Name; !- Node 1 Name NodeList, Kitchen_ZN_1_FLR_1 Inlet Nodes, !- Name Kitchen_ZN_1_FLR_1 Direct Air Inlet Node Name; !- Node 1 Name NodeList, Kitchen_ZN_1_FLR_1 Exhaust Nodes, !- Name Kitchen_ZN_1_FLR_1 Exhaust Fan Node; !- Node 1 Name NodeList, LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 Inlet Nodes, !- Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Cafeteria_ZN_1_FLR_1 Inlet Nodes, !- Name Cafeteria_ZN_1_FLR_1 Direct Air Inlet Node Name; !- Node 1 Name NodeList, Mech_ZN_1_FLR_1 Inlet Nodes, !- Name Mech_ZN_1_FLR_1 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Mech_ZN_1_FLR_2 Inlet Nodes, !- Name Mech_ZN_1_FLR_2 VAV Box Outlet Node Name; !- Node 1 Name NodeList, VAV_POD_1_OANode List, !- Name VAV_POD_1_OAInlet Node; !- Node 1 Name NodeList, VAV_POD_2_OANode List, !- Name VAV_POD_2_OAInlet Node; !- Node 1 Name NodeList, VAV_POD_3_OANode List, !- Name VAV_POD_3_OAInlet Node; !- Node 1 Name NodeList, VAV_OTHER_OANode List, !- Name VAV_OTHER_OAInlet Node; !- Node 1 Name NodeList, PSZ-AC_1:5_OANode List, !- Name PSZ-AC_1:5_OAInlet Node; !- Node 1 Name NodeList, PSZ-AC_2:6_OANode List, !- Name PSZ-AC_2:6_OAInlet Node; !- Node 1 Name NodeList, PSZ-AC_3:7_OANode List, !- Name PSZ-AC_3:7_OAInlet Node; !- Node 1 Name NodeList, PSZ-AC_4:8_OANode List, !- Name PSZ-AC_4:8_OAInlet Node; !- Node 1 Name NodeList, PSZ-AC_5:9_OANode List, !- Name PSZ-AC_5:9_OAInlet Node; !- Node 1 Name !- =========== ALL OBJECTS IN CLASS: OUTDOORAIR:NODE =========== OutdoorAir:Node, RACK1_condenserInlet; !- Name OutdoorAir:Node, RACK2_condenserInlet; !- Name OutdoorAir:Node, PSZ-AC_1:5_CoolCOA Ref node; !- Name OutdoorAir:Node, PSZ-AC_2:6_CoolCOA Ref node; !- Name OutdoorAir:Node, PSZ-AC_3:7_CoolCOA Ref node; !- Name OutdoorAir:Node, PSZ-AC_4:8_CoolCOA Ref node; !- Name OutdoorAir:Node, PSZ-AC_5:9_CoolCOA Ref node; !- Name OutdoorAir:Node, CoolSys1 Chillercondenser OA inlet; !- Name OutdoorAir:Node, PSZ-AC_1:5 Cond OA node; !- Name OutdoorAir:Node, PSZ-AC_2:6 Cond OA node; !- Name OutdoorAir:Node, PSZ-AC_3:7 Cond OA node; !- Name OutdoorAir:Node, PSZ-AC_4:8 Cond OA node; !- Name OutdoorAir:Node, PSZ-AC_5:9 Cond OA node; !- Name !- =========== ALL OBJECTS IN CLASS: OUTDOORAIR:NODELIST =========== OutdoorAir:NodeList, VAV_POD_1_OANode List; !- Node or NodeList Name 1 OutdoorAir:NodeList, VAV_POD_2_OANode List; !- Node or NodeList Name 1 OutdoorAir:NodeList, VAV_POD_3_OANode List; !- Node or NodeList Name 1 OutdoorAir:NodeList, VAV_OTHER_OANode List; !- Node or NodeList Name 1 OutdoorAir:NodeList, PSZ-AC_1:5_OANode List; !- Node or NodeList Name 1 OutdoorAir:NodeList, PSZ-AC_2:6_OANode List; !- Node or NodeList Name 1 OutdoorAir:NodeList, PSZ-AC_3:7_OANode List; !- Node or NodeList Name 1 OutdoorAir:NodeList, PSZ-AC_4:8_OANode List; !- Node or NodeList Name 1 OutdoorAir:NodeList, PSZ-AC_5:9_OANode List; !- Node or NodeList Name 1 !- =========== ALL OBJECTS IN CLASS: PUMP:VARIABLESPEED =========== Pump:ConstantSpeed, SHWSys1 Pump, !- Name SHWSys1 Supply Inlet Node, !- Inlet Node Name SHWSys1 Pump-SHWSys1 Water HeaterNodeviaConnector, !- Outlet Node Name autosize, !- Design Flow Rate {m3/s} 34026, !- Design Pump Head {Pa} AUTOSIZE, !- Design Power Consumption {W} 0.30, !- Motor Efficiency 0.0, !- Fraction of Motor Inefficiencies to Fluid Stream Intermittent; !- Pump Control Type Pump:VariableSpeed, HeatSys1 Pump, !- Name HeatSys1 Supply Inlet Node, !- Inlet Node Name HeatSys1 Pump-HeatSys1 BoilerNodeviaConnector, !- Outlet Node Name AUTOSIZE, !- Design Maximum Flow Rate {m3/s} 179352, !- Design Pump Head {Pa} AUTOSIZE, !- Design Power Consumption {W} 0.909, !- Motor Efficiency 0.0, !- Fraction of Motor Inefficiencies to Fluid Stream 0,0.0205, 0.4101,0.5753, !- VariableSpeed Pump Curve Coefficients 0, !- Design Minimum Flow Rate {m3/s} Intermittent; !- Pump Control Type Pump:ConstantSpeed, CoolSys1 Pump, !- Name CoolSys1 Supply Inlet Node, !- Inlet Node Name CoolSys1 Pump-CoolSys1 ChillerNodeviaConnector, !- Outlet Node Name AUTOSIZE, !- Design Flow Rate {m3/s} 44761.27683, !- Design Pump Head {Pa} AUTOSIZE, !- Design Power Consumption {W} 0.909, !- Motor Efficiency 0.0, !- Fraction of Motor Inefficiencies to Fluid Stream Intermittent, !- Pump Control Type ; !- Pump Flow Rate Schedule Name Pump:VariableSpeed, CoolSys1 Pump Secondary, !- Name CoolSys1 Demand Inlet Node, !- Inlet Node Name CoolSys1 Pump Secondary-CoolSys1 Demand Mixer, !- Outlet Node Name autosize, !- Design Maximum Flow Rate {m3/s} 134283.8305, !- Design Pump Head {Pa} autosize, !- Design Power Consumption {W} 0.909, !- Motor Efficiency 0, !- Fraction of Motor Inefficiencies to Fluid Stream 0,0.0205, 0.4101,0.5753, !- VariableSpeed Pump Curve Coefficients 0, !- Design Minimum Flow Rate {m3/s} Intermittent; !- Pump Control Type !- =========== ALL OBJECTS IN CLASS: BOILER:HOTWATER =========== Boiler:HotWater, HeatSys1 Boiler, !- Name NATURALGAS, !- Fuel Type 885017.67, !- Nominal Capacity {W} 0.8125, !- Nominal Thermal Efficiency LeavingBoiler, !- Efficiency Curve Temperature Evaluation Variable HeatSys1 Boiler Efficiency Curve, !- Normalized Boiler Efficiency Curve Name AUTOSIZE, !- Design Water Flow Rate {m3/s} 0.0, !- Minimum Part Load Ratio 1.2, !- Maximum Part Load Ratio 1.0, !- Optimum Part Load Ratio HeatSys1 Pump-HeatSys1 BoilerNode, !- Boiler Water Inlet Node Name HeatSys1 Supply Equipment Outlet Node, !- Boiler Water Outlet Node Name 95.0, !- Water Outlet Upper Temperature Limit {C} LeavingSetpointModulated,!- Boiler Flow Mode 0.0000, !- Parasitic Electric Load {W} 1.0000; !- Sizing Factor SetpointManager:Scheduled, HeatSys1 Boiler Setpoint Manager, !- Name Temperature, !- Control Variable HW-Loop-Temp-Schedule, !- Schedule Name HeatSys1 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name Curve:Quadratic, HeatSys1 Boiler Efficiency Curve, !- Name 1.0, !- Coefficient1 Constant 0.0, !- Coefficient2 x 0.0, !- Coefficient3 x**2 0, !- Minimum Value of x 1; !- Maximum Value of x !- =========== ALL OBJECTS IN CLASS: CHILLER:ELECTRIC:EIR =========== Chiller:Electric:EIR, CoolSys1 Chiller, !- Name 1072035.95, !- Reference Capacity {W} 2.96, !- Reference COP {W/W} 6.6700, !- Reference Leaving Chilled Water Temperature {C} 35.000, !- Reference Entering Condenser Fluid Temperature {C} AutoSize, !- Reference Chilled Water Flow Rate {m3/s} AutoSize, !- Reference Condenser Fluid Flow Rate {m3/s} AC_2010_PA_CAPFT, !- Cooling Capacity Function of Temperature Curve Name AC_2010_PA_EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name AC_GT150_2010_PA_EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name 0.1500, !- Minimum Part Load Ratio 1.0000, !- Maximum Part Load Ratio 1.0000, !- Optimum Part Load Ratio 0.2500, !- Minimum Unloading Ratio CoolSys1 Pump-CoolSys1 ChillerNode, !- Chilled Water Inlet Node Name CoolSys1 Supply Equipment Outlet Node, !- Chilled Water Outlet Node Name CoolSys1 Chillercondenser OA inlet, !- Condenser Inlet Node Name CoolSys1 Chillercondenser outlet, !- Condenser Outlet Node Name AIRCOOLED, !- Condenser Type , !- Condenser Fan Power Ratio {W/W} , !- Fraction of Compressor Electric Consumption Rejected by Condenser 2.0000, !- Leaving Chilled Water Lower Temperature Limit {C} ConstantFlow, !- Chiller Flow Mode 0.0000; !- Design Heat Recovery Water Flow Rate {m3/s} !- =========== ALL OBJECTS IN CLASS: WATERHEATER:MIXED =========== WaterHeater:Mixed, SHWSys1 Water Heater, !- Name 2.271247, !- Tank Volume {m3} SHWSys1 Water Heater Setpoint Temperature Schedule Name, !- Setpoint Temperature Schedule Name 2.0, !- Deadband Temperature Difference {deltaC} 82.2222, !- Maximum Temperature Limit {C} Cycle, !- Heater Control Type 175842.6, !- Heater Maximum Capacity {W} , !- Heater Minimum Capacity {W} , !- Heater Ignition Minimum Flow Rate {m3/s} , !- Heater Ignition Delay {s} NATURALGAS, !- Heater Fuel Type 0.802764687, !- Heater Thermal Efficiency , !- Part Load Factor Curve Name 1205.08, !- Off Cycle Parasitic Fuel Consumption Rate {W} NATURALGAS, !- Off Cycle Parasitic Fuel Type 0.8, !- Off Cycle Parasitic Heat Fraction to Tank 1205.08, !- On Cycle Parasitic Fuel Consumption Rate {W} NATURALGAS, !- On Cycle Parasitic Fuel Type , !- On Cycle Parasitic Heat Fraction to Tank zone, !- Ambient Temperature Indicator , !- Ambient Temperature Schedule Name MECH_ZN_1_FLR_1, !- Ambient Temperature Zone Name , !- Ambient Temperature Outdoor Air Node Name 15.60100579, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K} , !- Off Cycle Loss Fraction to Zone 15.60100579, !- On Cycle Loss Coefficient to Ambient Temperature {W/K} , !- On Cycle Loss Fraction to Zone , !- Peak Use Flow Rate {m3/s} , !- Use Flow Rate Fraction Schedule Name , !- Cold Water Supply Temperature Schedule Name SHWSys1 Pump-SHWSys1 Water HeaterNode, !- Use Side Inlet Node Name SHWSys1 Supply Equipment Outlet Node, !- Use Side Outlet Node Name 1.0, !- Use Side Effectiveness , !- Source Side Inlet Node Name , !- Source Side Outlet Node Name 1.0, !- Source Side Effectiveness AUTOSIZE, !- Use Side Design Flow Rate {m3/s} AUTOSIZE, !- Source Side Design Flow Rate {m3/s} 1.5; !- Indirect Water Heating Recovery Time {hr} WaterHeater:Mixed, SHW Booster Water Heater,!- Name 0.02271247, !- Tank Volume {m3} Booster Water Setpoint Temp Schedule, !- Setpoint Temperature Schedule Name 2.00000005298191, !- Deadband Temperature Difference {deltaC} 82.2222244003673, !- Maximum Temperature Limit {C} Cycle, !- Heater Control Type 14000, !- Heater Maximum Capacity {W} 0, !- Heater Minimum Capacity {W} , !- Heater Ignition Minimum Flow Rate {m3/s} , !- Heater Ignition Delay {s} Electricity, !- Heater Fuel Type 1, !- Heater Thermal Efficiency , !- Part Load Factor Curve Name , !- Off Cycle Parasitic Fuel Consumption Rate {W} Electricity, !- Off Cycle Parasitic Fuel Type 0, !- Off Cycle Parasitic Heat Fraction to Tank , !- On Cycle Parasitic Fuel Consumption Rate {W} , !- On Cycle Parasitic Fuel Type , !- On Cycle Parasitic Heat Fraction to Tank Zone, !- Ambient Temperature Indicator , !- Ambient Temperature Schedule Name KITCHEN_ZN_1_FLR_1, !- Ambient Temperature Zone Name , !- Ambient Temperature Outdoor Air Node Name 1.591045154, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K} , !- Off Cycle Loss Fraction to Zone 1.591045154, !- On Cycle Loss Coefficient to Ambient Temperature {W/K} , !- On Cycle Loss Fraction to Zone 1.49607339726648E-3, !- Peak Use Flow Rate {m3/s} BLDG_SWH_SCH, !- Use Flow Rate Fraction Schedule Name Booster Water Inlet Temp Schedule; !- Cold Water Supply Temperature Schedule Name !- =========== ALL OBJECTS IN CLASS: PLANTLOOP =========== PlantLoop, SHWSys1, !- Name Water, !- Fluid Type , !- User Defined Fluid Type SHWSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name SHWSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name 60.0, !- Maximum Loop Temperature {C} 10.0, !- Minimum Loop Temperature {C} AUTOSIZE, !- Maximum Loop Flow Rate {m3/s} 0.0, !- Minimum Loop Flow Rate {m3/s} AUTOSIZE, !- Plant Loop Volume {m3} SHWSys1 Supply Inlet Node, !- Plant Side Inlet Node Name SHWSys1 Supply Outlet Node, !- Plant Side Outlet Node Name SHWSys1 Supply Branches, !- Plant Side Branch List Name SHWSys1 Supply Connectors, !- Plant Side Connector List Name SHWSys1 Demand Inlet Node, !- Demand Side Inlet Node Name SHWSys1 Demand Outlet Node, !- Demand Side Outlet Node Name SHWSys1 Demand Branches, !- Demand Side Branch List Name SHWSys1 Demand Connectors, !- Demand Side Connector List Name Optimal; !- Load Distribution Scheme PlantLoop, HeatSys1, !- Name Water, !- Fluid Type , !- User Defined Fluid Type HeatSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name HeatSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name 100.0, !- Maximum Loop Temperature {C} 10.0, !- Minimum Loop Temperature {C} AUTOSIZE, !- Maximum Loop Flow Rate {m3/s} 0.0, !- Minimum Loop Flow Rate {m3/s} AUTOSIZE, !- Plant Loop Volume {m3} HeatSys1 Supply Inlet Node, !- Plant Side Inlet Node Name HeatSys1 Supply Outlet Node, !- Plant Side Outlet Node Name HeatSys1 Supply Branches,!- Plant Side Branch List Name HeatSys1 Supply Connectors, !- Plant Side Connector List Name HeatSys1 Demand Inlet Node, !- Demand Side Inlet Node Name HeatSys1 Demand Outlet Node, !- Demand Side Outlet Node Name HeatSys1 Demand Branches,!- Demand Side Branch List Name HeatSys1 Demand Connectors, !- Demand Side Connector List Name Optimal; !- Load Distribution Scheme PlantLoop, CoolSys1, !- Name Water, !- Fluid Type , !- User Defined Fluid Type CoolSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name CoolSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name 98.0, !- Maximum Loop Temperature {C} 1.0, !- Minimum Loop Temperature {C} AUTOSIZE, !- Maximum Loop Flow Rate {m3/s} 0.0, !- Minimum Loop Flow Rate {m3/s} AUTOSIZE, !- Plant Loop Volume {m3} CoolSys1 Supply Inlet Node, !- Plant Side Inlet Node Name CoolSys1 Supply Outlet Node, !- Plant Side Outlet Node Name CoolSys1 Supply Branches,!- Plant Side Branch List Name CoolSys1 Supply Connectors, !- Plant Side Connector List Name CoolSys1 Demand Inlet Node, !- Demand Side Inlet Node Name CoolSys1 Demand Outlet Node, !- Demand Side Outlet Node Name CoolSys1 Demand Branches,!- Demand Side Branch List Name CoolSys1 Demand Connectors, !- Demand Side Connector List Name SequentialLoad, !- Load Distribution Scheme , !- Availability Manager List Name , !- Plant Loop Demand Calculation Scheme TwoWayCommonPipe; !- Common Pipe Simulation !- =========== ALL OBJECTS IN CLASS: PIPE:ADIABATIC =========== Pipe:Adiabatic, SHWSys1 Supply Equipment Bypass Pipe, !- Name SHWSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name SHWSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name Pipe:Adiabatic, SHWSys1 Supply Outlet Pipe, !- Name SHWSys1 Supply Mixer-SHWSys1 Supply Outlet Pipe, !- Inlet Node Name SHWSys1 Supply Outlet Node; !- Outlet Node Name Pipe:Adiabatic, SHWSys1 Demand Inlet Pipe, !- Name SHWSys1 Demand Inlet Node, !- Inlet Node Name SHWSys1 Demand Inlet Pipe-SHWSys1 Demand Mixer; !- Outlet Node Name Pipe:Adiabatic, SHWSys1 Demand Bypass Pipe, !- Name SHWSys1 Demand Bypass Pipe Inlet Node, !- Inlet Node Name SHWSys1 Demand Bypass Pipe Outlet Node; !- Outlet Node Name Pipe:Adiabatic, SHWSys1 Demand Outlet Pipe, !- Name SHWSys1 Demand Mixer-SHWSys1 Demand Outlet Pipe, !- Inlet Node Name SHWSys1 Demand Outlet Node; !- Outlet Node Name Pipe:Adiabatic, HeatSys1 Supply Equipment Bypass Pipe, !- Name HeatSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name HeatSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name Pipe:Adiabatic, HeatSys1 Supply Outlet Pipe, !- Name HeatSys1 Supply Mixer-HeatSys1 Supply Outlet Pipe, !- Inlet Node Name HeatSys1 Supply Outlet Node; !- Outlet Node Name Pipe:Adiabatic, HeatSys1 Demand Inlet Pipe, !- Name HeatSys1 Demand Inlet Node, !- Inlet Node Name HeatSys1 Demand Inlet Pipe-HeatSys1 Demand Mixer; !- Outlet Node Name Pipe:Adiabatic, HeatSys1 Demand Bypass Pipe, !- Name HeatSys1 Demand Bypass Pipe Inlet Node, !- Inlet Node Name HeatSys1 Demand Bypass Pipe Outlet Node; !- Outlet Node Name Pipe:Adiabatic, HeatSys1 Demand Outlet Pipe, !- Name HeatSys1 Demand Mixer-HeatSys1 Demand Outlet Pipe, !- Inlet Node Name HeatSys1 Demand Outlet Node; !- Outlet Node Name Pipe:Adiabatic, CoolSys1 Supply Equipment Bypass Pipe, !- Name CoolSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name CoolSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name Pipe:Adiabatic, CoolSys1 Supply Outlet Pipe, !- Name CoolSys1 Supply Mixer-CoolSys1 Supply Outlet Pipe, !- Inlet Node Name CoolSys1 Supply Outlet Node; !- Outlet Node Name Pipe:Adiabatic, CoolSys1 Demand Outlet Pipe, !- Name CoolSys1 Demand Mixer-CoolSys1 Demand Outlet Pipe, !- Inlet Node Name CoolSys1 Demand Outlet Node; !- Outlet Node Name !- =========== ALL OBJECTS IN CLASS: PLANTEQUIPMENTLIST =========== PlantEquipmentList, SHWSys1 Equipment List, !- Name WaterHeater:Mixed, !- Equipment 1 Object Type SHWSys1 Water Heater; !- Equipment 1 Name PlantEquipmentList, HeatSys1 Equipment List, !- Name Boiler:HotWater, !- Equipment 1 Object Type HeatSys1 Boiler; !- Equipment 1 Name PlantEquipmentList, CoolSys1 Equipment List, !- Name Chiller:Electric:EIR, !- Equipment 1 Object Type CoolSys1 Chiller; !- Equipment 1 Name !- =========== ALL OBJECTS IN CLASS: PLANTEQUIPMENTOPERATION:COOLINGLOAD =========== PlantEquipmentOperation:CoolingLoad, CoolSys1 Operation Scheme, !- Name 0.0, !- Load Range 1 Lower Limit {W} 100000000000000, !- Load Range 1 Upper Limit {W} CoolSys1 Equipment List; !- Range 1 Equipment List Name !- =========== ALL OBJECTS IN CLASS: PLANTEQUIPMENTOPERATION:HEATINGLOAD =========== PlantEquipmentOperation:HeatingLoad, SHWSys1 Operation Scheme,!- Name 0.0, !- Load Range 1 Lower Limit {W} 1000000000000000, !- Load Range 1 Upper Limit {W} SHWSys1 Equipment List; !- Range 1 Equipment List Name PlantEquipmentOperation:HeatingLoad, HeatSys1 Operation Scheme, !- Name 0.0, !- Load Range 1 Lower Limit {W} 1000000000000000, !- Load Range 1 Upper Limit {W} HeatSys1 Equipment List; !- Range 1 Equipment List Name !- =========== ALL OBJECTS IN CLASS: PLANTEQUIPMENTOPERATIONSCHEMES =========== PlantEquipmentOperationSchemes, SHWSys1 Loop Operation Scheme List, !- Name PlantEquipmentOperation:HeatingLoad, !- Control Scheme 1 Object Type SHWSys1 Operation Scheme,!- Control Scheme 1 Name PlantOnSched; !- Control Scheme 1 Schedule Name PlantEquipmentOperationSchemes, HeatSys1 Loop Operation Scheme List, !- Name PlantEquipmentOperation:HeatingLoad, !- Control Scheme 1 Object Type HeatSys1 Operation Scheme, !- Control Scheme 1 Name PlantOnSched; !- Control Scheme 1 Schedule Name PlantEquipmentOperationSchemes, CoolSys1 Loop Operation Scheme List, !- Name PlantEquipmentOperation:CoolingLoad, !- Control Scheme 1 Object Type CoolSys1 Operation Scheme, !- Control Scheme 1 Name PlantOnSched; !- Control Scheme 1 Schedule Name !- =========== ALL OBJECTS IN CLASS: AVAILABILITYMANAGER:NIGHTCYCLE =========== AvailabilityManager:NightCycle, VAV_POD_1 Availability Manager, !- Name Always_On, !- Applicability Schedule Name HVACOperationSchd, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} AvailabilityManager:NightCycle, VAV_POD_2 Availability Manager, !- Name Always_On, !- Applicability Schedule Name HVACOperationSchd, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} AvailabilityManager:NightCycle, VAV_POD_3 Availability Manager, !- Name Always_On, !- Applicability Schedule Name HVACOperationSchd, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} AvailabilityManager:NightCycle, VAV_OTHER Availability Manager, !- Name Always_On, !- Applicability Schedule Name HVACOperationSchd, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} AvailabilityManager:NightCycle, PSZ-AC_1:5 Availability Manager, !- Name Always_On, !- Applicability Schedule Name HVACOperationSchd, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} AvailabilityManager:NightCycle, PSZ-AC_2:6 Availability Manager, !- Name Always_On, !- Applicability Schedule Name HVACOperationSchd, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} AvailabilityManager:NightCycle, PSZ-AC_3:7 Availability Manager, !- Name Always_On, !- Applicability Schedule Name HVACOperationSchd, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} AvailabilityManager:NightCycle, PSZ-AC_4:8 Availability Manager, !- Name Always_On, !- Applicability Schedule Name HVACOperationSchd, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} AvailabilityManager:NightCycle, PSZ-AC_5:9 Availability Manager, !- Name Always_On, !- Applicability Schedule Name HVACOperationSchd, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} !- =========== ALL OBJECTS IN CLASS: AVAILABILITYMANAGERASSIGNMENTLIST =========== AvailabilityManagerAssignmentList, VAV_POD_1 Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type VAV_POD_1 Availability Manager; !- Availability Manager 1 Name AvailabilityManagerAssignmentList, VAV_POD_2 Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type VAV_POD_2 Availability Manager; !- Availability Manager 1 Name AvailabilityManagerAssignmentList, VAV_POD_3 Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type VAV_POD_3 Availability Manager; !- Availability Manager 1 Name AvailabilityManagerAssignmentList, VAV_OTHER Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type VAV_OTHER Availability Manager; !- Availability Manager 1 Name AvailabilityManagerAssignmentList, PSZ-AC_1:5 Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type PSZ-AC_1:5 Availability Manager; !- Availability Manager 1 Name AvailabilityManagerAssignmentList, PSZ-AC_2:6 Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type PSZ-AC_2:6 Availability Manager; !- Availability Manager 1 Name AvailabilityManagerAssignmentList, PSZ-AC_3:7 Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type PSZ-AC_3:7 Availability Manager; !- Availability Manager 1 Name AvailabilityManagerAssignmentList, PSZ-AC_4:8 Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type PSZ-AC_4:8 Availability Manager; !- Availability Manager 1 Name AvailabilityManagerAssignmentList, PSZ-AC_5:9 Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type PSZ-AC_5:9 Availability Manager; !- Availability Manager 1 Name !- =========== ALL OBJECTS IN CLASS: SETPOINTMANAGER:SCHEDULED =========== SetpointManager:Scheduled, CoolSys1 Loop Plant Demand Inlet Setpoint Manager, !- Name Temperature, !- Control Variable CW-Loop-Temp-Schedule, !- Schedule Name CoolSys1 Demand Inlet Node; !- Setpoint Node or NodeList Name SetpointManager:Scheduled, SHWSys1 Loop Setpoint Manager, !- Name Temperature, !- Control Variable SHWSys1-Loop-Temp-Schedule, !- Schedule Name SHWSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:Scheduled, HeatSys1 Loop Setpoint Manager, !- Name Temperature, !- Control Variable HW-Loop-Temp-Schedule, !- Schedule Name HeatSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:Scheduled, CoolSys1 Loop Setpoint Manager, !- Name Temperature, !- Control Variable CW-Loop-Temp-Schedule, !- Schedule Name CoolSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name !- =========== ALL OBJECTS IN CLASS: SET POINT MANAGER:OUTDOORAIRRESET =========== SetpointManager:OutdoorAirReset, VAV_POD_1 SAT setpoint, !- Name Temperature, !- Control Variable 15.6, !- Setpoint at Outdoor Low Temperature {C} 10, !- Outdoor Low Temperature {C} 12.8, !- Setpoint at Outdoor High Temperature {C} 21.1, !- Outdoor High Temperature {C} VAV_POD_1 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:OutdoorAirReset, VAV_POD_2 SAT setpoint, !- Name Temperature, !- Control Variable 15.6, !- Setpoint at Outdoor Low Temperature {C} 10, !- Outdoor Low Temperature {C} 12.8, !- Setpoint at Outdoor High Temperature {C} 21.1, !- Outdoor High Temperature {C} VAV_POD_2 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:OutdoorAirReset, VAV_POD_3 SAT setpoint, !- Name Temperature, !- Control Variable 15.6, !- Setpoint at Outdoor Low Temperature {C} 10, !- Outdoor Low Temperature {C} 12.8, !- Setpoint at Outdoor High Temperature {C} 21.1, !- Outdoor High Temperature {C} VAV_POD_3 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:OutdoorAirReset, VAV_OTHER SAT setpoint, !- Name Temperature, !- Control Variable 15.6, !- Setpoint at Outdoor Low Temperature {C} 10, !- Outdoor Low Temperature {C} 12.8, !- Setpoint at Outdoor High Temperature {C} 21.1, !- Outdoor High Temperature {C} VAV_OTHER Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name !- =========== ALL OBJECTS IN CLASS: SETPOINTMANAGER:SINGLEZONE:HEATING & COOLING =========== SetpointManager:SingleZone:Heating, SupAirTemp MngrGym_ZN_1_FLR_1 - Htg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature {C} 50.0, !- Maximum Supply Air Temperature {C} Gym_ZN_1_FLR_1, !- Control Zone Name Gym_ZN_1_FLR_1 Air Node, !- Zone Node Name Gym_ZN_1_FLR_1 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_1:5 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:SingleZone:Cooling, SupAirTemp MngrGym_ZN_1_FLR_1 - Clg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature {C} 50.0, !- Maximum Supply Air Temperature {C} Gym_ZN_1_FLR_1, !- Control Zone Name Gym_ZN_1_FLR_1 Air Node, !- Zone Node Name Gym_ZN_1_FLR_1 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_1:5 Zone Equipment Inlet Node; !- Setpoint Node or NodeList Name SetpointManager:SingleZone:Heating, SupAirTemp MngrAux_Gym_ZN_1_FLR_1 - Htg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature {C} 50.0, !- Maximum Supply Air Temperature {C} Aux_Gym_ZN_1_FLR_1, !- Control Zone Name Aux_Gym_ZN_1_FLR_1 Air Node, !- Zone Node Name Aux_Gym_ZN_1_FLR_1 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_2:6 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:SingleZone:Cooling, SupAirTemp MngrAux_Gym_ZN_1_FLR_1 - Clg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature {C} 50.0, !- Maximum Supply Air Temperature {C} Aux_Gym_ZN_1_FLR_1, !- Control Zone Name Aux_Gym_ZN_1_FLR_1 Air Node, !- Zone Node Name Aux_Gym_ZN_1_FLR_1 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_2:6 Zone Equipment Inlet Node; !- Setpoint Node or NodeList Name SetpointManager:SingleZone:Heating, SupAirTemp MngrAuditorium_ZN_1_FLR_1 - Htg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature {C} 50.0, !- Maximum Supply Air Temperature {C} Auditorium_ZN_1_FLR_1, !- Control Zone Name Auditorium_ZN_1_FLR_1 Air Node, !- Zone Node Name Auditorium_ZN_1_FLR_1 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_3:7 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:SingleZone:Cooling, SupAirTemp MngrAuditorium_ZN_1_FLR_1 - Clg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature {C} 50.0, !- Maximum Supply Air Temperature {C} Auditorium_ZN_1_FLR_1, !- Control Zone Name Auditorium_ZN_1_FLR_1 Air Node, !- Zone Node Name Auditorium_ZN_1_FLR_1 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_3:7 Zone Equipment Inlet Node; !- Setpoint Node or NodeList Name SetpointManager:SingleZone:Heating, SupAirTemp MngrKitchen_ZN_1_FLR_1 - Htg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature {C} 50.0, !- Maximum Supply Air Temperature {C} Kitchen_ZN_1_FLR_1, !- Control Zone Name Kitchen_ZN_1_FLR_1 Air Node, !- Zone Node Name Kitchen_ZN_1_FLR_1 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_4:8 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:SingleZone:Cooling, SupAirTemp MngrKitchen_ZN_1_FLR_1 - Clg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature {C} 50.0, !- Maximum Supply Air Temperature {C} Kitchen_ZN_1_FLR_1, !- Control Zone Name Kitchen_ZN_1_FLR_1 Air Node, !- Zone Node Name Kitchen_ZN_1_FLR_1 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_4:8 Zone Equipment Inlet Node; !- Setpoint Node or NodeList Name SetpointManager:SingleZone:Heating, SupAirTemp MngrCafeteria_ZN_1_FLR_1 - Htg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature {C} 50.0, !- Maximum Supply Air Temperature {C} Cafeteria_ZN_1_FLR_1, !- Control Zone Name Cafeteria_ZN_1_FLR_1 Air Node, !- Zone Node Name Cafeteria_ZN_1_FLR_1 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_5:9 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:SingleZone:Cooling, SupAirTemp MngrCafeteria_ZN_1_FLR_1 - Clg, !- Name Temperature, !- Control Variable 10.0, !- Minimum Supply Air Temperature {C} 50.0, !- Maximum Supply Air Temperature {C} Cafeteria_ZN_1_FLR_1, !- Control Zone Name Cafeteria_ZN_1_FLR_1 Air Node, !- Zone Node Name Cafeteria_ZN_1_FLR_1 Direct Air Inlet Node Name, !- Zone Inlet Node Name PSZ-AC_5:9 Zone Equipment Inlet Node; !- Setpoint Node or NodeList Name !- =========== ALL OBJECTS IN CLASS: SETPOINTMANAGER:MIXEDAIR =========== SetpointManager:MixedAir, VAV_POD_1_CoolC SAT Manager, !- Name Temperature, !- Control Variable VAV_POD_1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_POD_1_HeatC-VAV_POD_1 FanNode, !- Fan Inlet Node Name VAV_POD_1 Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_POD_1_CoolC-VAV_POD_1_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_POD_1_HeatC SAT Manager, !- Name Temperature, !- Control Variable VAV_POD_1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_POD_1_HeatC-VAV_POD_1 FanNode, !- Fan Inlet Node Name VAV_POD_1 Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_POD_1_HeatC-VAV_POD_1 FanNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_POD_1_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable VAV_POD_1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_POD_1_HeatC-VAV_POD_1 FanNode, !- Fan Inlet Node Name VAV_POD_1 Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_POD_1_OA-VAV_POD_1_CoolCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_POD_2_CoolC SAT Manager, !- Name Temperature, !- Control Variable VAV_POD_2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_POD_2_HeatC-VAV_POD_2 FanNode, !- Fan Inlet Node Name VAV_POD_2 Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_POD_2_CoolC-VAV_POD_2_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_POD_2_HeatC SAT Manager, !- Name Temperature, !- Control Variable VAV_POD_2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_POD_2_HeatC-VAV_POD_2 FanNode, !- Fan Inlet Node Name VAV_POD_2 Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_POD_2_HeatC-VAV_POD_2 FanNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_POD_2_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable VAV_POD_2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_POD_2_HeatC-VAV_POD_2 FanNode, !- Fan Inlet Node Name VAV_POD_2 Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_POD_2_OA-VAV_POD_2_CoolCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_POD_3_CoolC SAT Manager, !- Name Temperature, !- Control Variable VAV_POD_3 Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_POD_3_HeatC-VAV_POD_3 FanNode, !- Fan Inlet Node Name VAV_POD_3 Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_POD_3_CoolC-VAV_POD_3_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_POD_3_HeatC SAT Manager, !- Name Temperature, !- Control Variable VAV_POD_3 Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_POD_3_HeatC-VAV_POD_3 FanNode, !- Fan Inlet Node Name VAV_POD_3 Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_POD_3_HeatC-VAV_POD_3 FanNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_POD_3_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable VAV_POD_3 Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_POD_3_HeatC-VAV_POD_3 FanNode, !- Fan Inlet Node Name VAV_POD_3 Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_POD_3_OA-VAV_POD_3_CoolCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_OTHER_CoolC SAT Manager, !- Name Temperature, !- Control Variable VAV_OTHER Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_OTHER_HeatC-VAV_OTHER FanNode, !- Fan Inlet Node Name VAV_OTHER Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_OTHER_CoolC-VAV_OTHER_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_OTHER_HeatC SAT Manager, !- Name Temperature, !- Control Variable VAV_OTHER Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_OTHER_HeatC-VAV_OTHER FanNode, !- Fan Inlet Node Name VAV_OTHER Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_OTHER_HeatC-VAV_OTHER FanNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_OTHER_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable VAV_OTHER Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_OTHER_HeatC-VAV_OTHER FanNode, !- Fan Inlet Node Name VAV_OTHER Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_OTHER_OA-VAV_OTHER_CoolCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, PSZ-AC_1:5_CoolC SAT Manager, !- Name Temperature, !- Control Variable PSZ-AC_1:5 Zone Equipment Inlet Node, !- Reference Setpoint Node Name PSZ-AC_1:5_HeatC-PSZ-AC_1:5 FanNode, !- Fan Inlet Node Name PSZ-AC_1:5 Supply Equipment Outlet Node, !- Fan Outlet Node Name PSZ-AC_1:5_CoolC-PSZ-AC_1:5_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, PSZ-AC_1:5_HeatC MixedAir Manager, !- Name Temperature, !- Control Variable PSZ-AC_1:5 Supply Equipment Outlet Node, !- Reference Setpoint Node Name PSZ-AC_1:5_HeatC-PSZ-AC_1:5 FanNode, !- Fan Inlet Node Name PSZ-AC_1:5 Supply Equipment Outlet Node, !- Fan Outlet Node Name PSZ-AC_1:5_HeatC-PSZ-AC_1:5 FanNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, PSZ-AC_1:5_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable PSZ-AC_1:5 Zone Equipment Inlet Node, !- Reference Setpoint Node Name PSZ-AC_1:5_HeatC-PSZ-AC_1:5 FanNode, !- Fan Inlet Node Name PSZ-AC_1:5 Supply Equipment Outlet Node, !- Fan Outlet Node Name PSZ-AC_1:5_OA-PSZ-AC_1:5_CoolCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, PSZ-AC_2:6_CoolC SAT Manager, !- Name Temperature, !- Control Variable PSZ-AC_2:6 Zone Equipment Inlet Node, !- Reference Setpoint Node Name PSZ-AC_2:6_HeatC-PSZ-AC_2:6 FanNode, !- Fan Inlet Node Name PSZ-AC_2:6 Supply Equipment Outlet Node, !- Fan Outlet Node Name PSZ-AC_2:6_CoolC-PSZ-AC_2:6_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, PSZ-AC_2:6_HeatC MixedAir Manager, !- Name Temperature, !- Control Variable PSZ-AC_2:6 Supply Equipment Outlet Node, !- Reference Setpoint Node Name PSZ-AC_2:6_HeatC-PSZ-AC_2:6 FanNode, !- Fan Inlet Node Name PSZ-AC_2:6 Supply Equipment Outlet Node, !- Fan Outlet Node Name PSZ-AC_2:6_HeatC-PSZ-AC_2:6 FanNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, PSZ-AC_2:6_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable PSZ-AC_2:6 Zone Equipment Inlet Node, !- Reference Setpoint Node Name PSZ-AC_2:6_HeatC-PSZ-AC_2:6 FanNode, !- Fan Inlet Node Name PSZ-AC_2:6 Supply Equipment Outlet Node, !- Fan Outlet Node Name PSZ-AC_2:6_OA-PSZ-AC_2:6_CoolCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, PSZ-AC_3:7_CoolC SAT Manager, !- Name Temperature, !- Control Variable PSZ-AC_3:7 Zone Equipment Inlet Node, !- Reference Setpoint Node Name PSZ-AC_3:7_HeatC-PSZ-AC_3:7 FanNode, !- Fan Inlet Node Name PSZ-AC_3:7 Supply Equipment Outlet Node, !- Fan Outlet Node Name PSZ-AC_3:7_CoolC-PSZ-AC_3:7_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, PSZ-AC_3:7_HeatC MixedAir Manager, !- Name Temperature, !- Control Variable PSZ-AC_3:7 Supply Equipment Outlet Node, !- Reference Setpoint Node Name PSZ-AC_3:7_HeatC-PSZ-AC_3:7 FanNode, !- Fan Inlet Node Name PSZ-AC_3:7 Supply Equipment Outlet Node, !- Fan Outlet Node Name PSZ-AC_3:7_HeatC-PSZ-AC_3:7 FanNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, PSZ-AC_3:7_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable PSZ-AC_3:7 Zone Equipment Inlet Node, !- Reference Setpoint Node Name PSZ-AC_3:7_HeatC-PSZ-AC_3:7 FanNode, !- Fan Inlet Node Name PSZ-AC_3:7 Supply Equipment Outlet Node, !- Fan Outlet Node Name PSZ-AC_3:7_OA-PSZ-AC_3:7_CoolCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, PSZ-AC_4:8_CoolC SAT Manager, !- Name Temperature, !- Control Variable PSZ-AC_4:8 Zone Equipment Inlet Node, !- Reference Setpoint Node Name PSZ-AC_4:8_HeatC-PSZ-AC_4:8 FanNode, !- Fan Inlet Node Name PSZ-AC_4:8 Supply Equipment Outlet Node, !- Fan Outlet Node Name PSZ-AC_4:8_CoolC-PSZ-AC_4:8_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, PSZ-AC_4:8_HeatC MixedAir Manager, !- Name Temperature, !- Control Variable PSZ-AC_4:8 Supply Equipment Outlet Node, !- Reference Setpoint Node Name PSZ-AC_4:8_HeatC-PSZ-AC_4:8 FanNode, !- Fan Inlet Node Name PSZ-AC_4:8 Supply Equipment Outlet Node, !- Fan Outlet Node Name PSZ-AC_4:8_HeatC-PSZ-AC_4:8 FanNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, PSZ-AC_4:8_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable PSZ-AC_4:8 Zone Equipment Inlet Node, !- Reference Setpoint Node Name PSZ-AC_4:8_HeatC-PSZ-AC_4:8 FanNode, !- Fan Inlet Node Name PSZ-AC_4:8 Supply Equipment Outlet Node, !- Fan Outlet Node Name PSZ-AC_4:8_OA-PSZ-AC_4:8_CoolCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, PSZ-AC_5:9_CoolC SAT Manager, !- Name Temperature, !- Control Variable PSZ-AC_5:9 Zone Equipment Inlet Node, !- Reference Setpoint Node Name PSZ-AC_5:9_HeatC-PSZ-AC_5:9 FanNode, !- Fan Inlet Node Name PSZ-AC_5:9 Supply Equipment Outlet Node, !- Fan Outlet Node Name PSZ-AC_5:9_CoolC-PSZ-AC_5:9_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, PSZ-AC_5:9_HeatC MixedAir Manager, !- Name Temperature, !- Control Variable PSZ-AC_5:9 Supply Equipment Outlet Node, !- Reference Setpoint Node Name PSZ-AC_5:9_HeatC-PSZ-AC_5:9 FanNode, !- Fan Inlet Node Name PSZ-AC_5:9 Supply Equipment Outlet Node, !- Fan Outlet Node Name PSZ-AC_5:9_HeatC-PSZ-AC_5:9 FanNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, PSZ-AC_5:9_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable PSZ-AC_5:9 Zone Equipment Inlet Node, !- Reference Setpoint Node Name PSZ-AC_5:9_HeatC-PSZ-AC_5:9 FanNode, !- Fan Inlet Node Name PSZ-AC_5:9 Supply Equipment Outlet Node, !- Fan Outlet Node Name PSZ-AC_5:9_OA-PSZ-AC_5:9_CoolCNode; !- Setpoint Node or NodeList Name SetpointManager:OutdoorAirPretreat, VAV_Pod_1 Heat Exchanger Supply Air Temp Manager, !- Name Temperature, !- Control Variable -99, !- Minimum Setpoint Temperature {C} 99, !- Maximum Setpoint Temperature {C} 0.00001, !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir} 1.0, !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir} VAV_POD_1_OA-VAV_POD_1_CoolCNode, !- Reference Setpoint Node Name VAV_POD_1_OA-VAV_POD_1_CoolCNode, !- Mixed Air Stream Node Name VAV_Pod_1_OAInlet Node, !- Outdoor Air Stream Node Name VAV_Pod_1 Supply Equipment Inlet Node, !- Return Air Stream Node Name VAV_Pod_1 Heat Recovery Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:OutdoorAirPretreat, VAV_Pod_2 Heat Exchanger Supply Air Temp Manager, !- Name Temperature, !- Control Variable -99, !- Minimum Setpoint Temperature {C} 99, !- Maximum Setpoint Temperature {C} 0.00001, !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir} 1.0, !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir} VAV_Pod_2_OA-VAV_Pod_2_CoolCNode, !- Reference Setpoint Node Name VAV_Pod_2_OA-VAV_Pod_2_CoolCNode, !- Mixed Air Stream Node Name VAV_Pod_2_OAInlet Node, !- Outdoor Air Stream Node Name VAV_Pod_2 Supply Equipment Inlet Node, !- Return Air Stream Node Name VAV_Pod_2 Heat Recovery Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:OutdoorAirPretreat, VAV_Pod_3 Heat Exchanger Supply Air Temp Manager, !- Name Temperature, !- Control Variable -99, !- Minimum Setpoint Temperature {C} 99, !- Maximum Setpoint Temperature {C} 0.00001, !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir} 1.0, !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir} VAV_Pod_3_OA-VAV_Pod_3_CoolCNode, !- Reference Setpoint Node Name VAV_Pod_3_OA-VAV_Pod_3_CoolCNode, !- Mixed Air Stream Node Name VAV_Pod_3_OAInlet Node, !- Outdoor Air Stream Node Name VAV_Pod_3 Supply Equipment Inlet Node, !- Return Air Stream Node Name VAV_Pod_3 Heat Recovery Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:OutdoorAirPretreat, VAV_OTHER Heat Exchanger Supply Air Temp Manager, !- Name Temperature, !- Control Variable -99, !- Minimum Setpoint Temperature {C} 99, !- Maximum Setpoint Temperature {C} 0.00001, !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir} 1.0, !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir} VAV_OTHER_OA-VAV_OTHER_CoolCNode, !- Reference Setpoint Node Name VAV_OTHER_OA-VAV_OTHER_CoolCNode, !- Mixed Air Stream Node Name VAV_OTHER_OAInlet Node, !- Outdoor Air Stream Node Name VAV_OTHER Supply Equipment Inlet Node, !- Return Air Stream Node Name VAV_OTHER Heat Recovery Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:OutdoorAirPretreat, PSZ-AC_2:6 Heat Exchanger Supply Air Temp Manager, !- Name Temperature, !- Control Variable -99, !- Minimum Setpoint Temperature {C} 99, !- Maximum Setpoint Temperature {C} 0.00001, !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir} 1.0, !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir} PSZ-AC_2:6_OA-PSZ-AC_2:6_CoolCNode, !- Reference Setpoint Node Name PSZ-AC_2:6_OA-PSZ-AC_2:6_CoolCNode, !- Mixed Air Stream Node Name PSZ-AC_2:6_OAInlet Node, !- Outdoor Air Stream Node Name PSZ-AC_2:6 Supply Equipment Inlet Node, !- Return Air Stream Node Name PSZ-AC_2:6 Heat Recovery Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:OutdoorAirPretreat, PSZ-AC_3:7 Heat Exchanger Supply Air Temp Manager, !- Name Temperature, !- Control Variable -99, !- Minimum Setpoint Temperature {C} 99, !- Maximum Setpoint Temperature {C} 0.00001, !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir} 1.0, !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir} PSZ-AC_3:7_OA-PSZ-AC_3:7_CoolCNode, !- Reference Setpoint Node Name PSZ-AC_3:7_OA-PSZ-AC_3:7_CoolCNode, !- Mixed Air Stream Node Name PSZ-AC_3:7_OAInlet Node, !- Outdoor Air Stream Node Name PSZ-AC_3:7 Supply Equipment Inlet Node, !- Return Air Stream Node Name PSZ-AC_3:7 Heat Recovery Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:OutdoorAirPretreat, PSZ-AC_5:9 Heat Exchanger Supply Air Temp Manager, !- Name Temperature, !- Control Variable -99, !- Minimum Setpoint Temperature {C} 99, !- Maximum Setpoint Temperature {C} 0.00001, !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir} 1.0, !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir} PSZ-AC_5:9_OA-PSZ-AC_5:9_CoolCNode, !- Reference Setpoint Node Name PSZ-AC_5:9_OA-PSZ-AC_5:9_CoolCNode, !- Mixed Air Stream Node Name PSZ-AC_5:9_OAInlet Node, !- Outdoor Air Stream Node Name PSZ-AC_5:9 Supply Equipment Inlet Node, !- Return Air Stream Node Name PSZ-AC_5:9 Heat Recovery Outlet Node; !- Setpoint Node or NodeList Name !- =========== ALL OBJECTS IN CLASS: HEATEXCHANGER:AIRTOAIR:SENSIBLEANDLATENT =========== HeatExchanger:AirToAir:SensibleAndLatent, VAV_POD_1 OA Heat Recovery, !- Name Always_On, !- Availability Schedule Name AUTOSIZE, !- Nominal Supply Air Flow Rate {m3/s} 0.70, !- Sensible Effectiveness at 100% Heating Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 100% Heating Air Flow {dimensionless} 0.70, !- Sensible Effectiveness at 75% Heating Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 75% Heating Air Flow {dimensionless} 0.75, !- Sensible Effectiveness at 100% Cooling Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 100% Cooling Air Flow {dimensionless} 0.75, !- Sensible Effectiveness at 75% Cooling Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 75% Cooling Air Flow {dimensionless} VAV_POD_1_OAInlet Node, !- Supply Air Inlet Node Name VAV_POD_1 Heat Recovery Outlet Node, !- Supply Air Outlet Node Name VAV_POD_1_OARelief Node, !- Exhaust Air Inlet Node Name VAV_POD_1 Heat Recovery Secondary Outlet Node, !- Exhaust Air Outlet Node Name 5498.91025, !- Nominal Electric Power {W} Yes, !- Supply Air Outlet Temperature Control Rotary, !- Heat Exchanger Type ExhaustOnly, !- Frost Control Type -23.3, !- Threshold Temperature {C} 0.167, !- Initial Defrost Time Fraction {dimensionless} 1.44; !- Rate of Defrost Time Fraction Increase {1/K} HeatExchanger:AirToAir:SensibleAndLatent, VAV_Pod_2 OA Heat Recovery, !- Name Always_On, !- Availability Schedule Name AUTOSIZE, !- Nominal Supply Air Flow Rate {m3/s} 0.70, !- Sensible Effectiveness at 100% Heating Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 100% Heating Air Flow {dimensionless} 0.70, !- Sensible Effectiveness at 75% Heating Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 75% Heating Air Flow {dimensionless} 0.75, !- Sensible Effectiveness at 100% Cooling Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 100% Cooling Air Flow {dimensionless} 0.75, !- Sensible Effectiveness at 75% Cooling Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 75% Cooling Air Flow {dimensionless} VAV_Pod_2_OAInlet Node, !- Supply Air Inlet Node Name VAV_Pod_2 Heat Recovery Outlet Node, !- Supply Air Outlet Node Name VAV_Pod_2_OARelief Node, !- Exhaust Air Inlet Node Name VAV_Pod_2 Heat Recovery Secondary Outlet Node, !- Exhaust Air Outlet Node Name 5498.91025, !- Nominal Electric Power {W} Yes, !- Supply Air Outlet Temperature Control Rotary, !- Heat Exchanger Type ExhaustOnly, !- Frost Control Type -23.3, !- Threshold Temperature {C} 0.167, !- Initial Defrost Time Fraction {dimensionless} 1.44; !- Rate of Defrost Time Fraction Increase {1/K} HeatExchanger:AirToAir:SensibleAndLatent, VAV_Pod_3 OA Heat Recovery, !- Name Always_On, !- Availability Schedule Name AUTOSIZE, !- Nominal Supply Air Flow Rate {m3/s} 0.70, !- Sensible Effectiveness at 100% Heating Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 100% Heating Air Flow {dimensionless} 0.70, !- Sensible Effectiveness at 75% Heating Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 75% Heating Air Flow {dimensionless} 0.75, !- Sensible Effectiveness at 100% Cooling Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 100% Cooling Air Flow {dimensionless} 0.75, !- Sensible Effectiveness at 75% Cooling Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 75% Cooling Air Flow {dimensionless} VAV_Pod_3_OAInlet Node, !- Supply Air Inlet Node Name VAV_Pod_3 Heat Recovery Outlet Node, !- Supply Air Outlet Node Name VAV_Pod_3_OARelief Node, !- Exhaust Air Inlet Node Name VAV_Pod_3 Heat Recovery Secondary Outlet Node, !- Exhaust Air Outlet Node Name 5498.91025, !- Nominal Electric Power {W} Yes, !- Supply Air Outlet Temperature Control Rotary, !- Heat Exchanger Type ExhaustOnly, !- Frost Control Type -23.3, !- Threshold Temperature {C} 0.167, !- Initial Defrost Time Fraction {dimensionless} 1.44; !- Rate of Defrost Time Fraction Increase {1/K} HeatExchanger:AirToAir:SensibleAndLatent, VAV_OTHER OA Heat Recovery, !- Name Always_On, !- Availability Schedule Name AUTOSIZE, !- Nominal Supply Air Flow Rate {m3/s} 0.70, !- Sensible Effectiveness at 100% Heating Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 100% Heating Air Flow {dimensionless} 0.70, !- Sensible Effectiveness at 75% Heating Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 75% Heating Air Flow {dimensionless} 0.75, !- Sensible Effectiveness at 100% Cooling Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 100% Cooling Air Flow {dimensionless} 0.75, !- Sensible Effectiveness at 75% Cooling Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 75% Cooling Air Flow {dimensionless} VAV_OTHER_OAInlet Node, !- Supply Air Inlet Node Name VAV_OTHER Heat Recovery Outlet Node, !- Supply Air Outlet Node Name VAV_OTHER_OARelief Node, !- Exhaust Air Inlet Node Name VAV_OTHER Heat Recovery Secondary Outlet Node, !- Exhaust Air Outlet Node Name 1970.67575, !- Nominal Electric Power {W} Yes, !- Supply Air Outlet Temperature Control Rotary, !- Heat Exchanger Type ExhaustOnly, !- Frost Control Type -23.3, !- Threshold Temperature {C} 0.167, !- Initial Defrost Time Fraction {dimensionless} 1.44; !- Rate of Defrost Time Fraction Increase {1/K} HeatExchanger:AirToAir:SensibleAndLatent, PSZ-AC_2:6 OA Heat Recovery, !- Name Always_On, !- Availability Schedule Name AUTOSIZE, !- Nominal Supply Air Flow Rate {m3/s} 0.70, !- Sensible Effectiveness at 100% Heating Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 100% Heating Air Flow {dimensionless} 0.70, !- Sensible Effectiveness at 75% Heating Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 75% Heating Air Flow {dimensionless} 0.75, !- Sensible Effectiveness at 100% Cooling Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 100% Cooling Air Flow {dimensionless} 0.75, !- Sensible Effectiveness at 75% Cooling Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 75% Cooling Air Flow {dimensionless} PSZ-AC_2:6_OAInlet Node, !- Supply Air Inlet Node Name PSZ-AC_2:6 Heat Recovery Outlet Node, !- Supply Air Outlet Node Name PSZ-AC_2:6_OARelief Node,!- Exhaust Air Inlet Node Name PSZ-AC_2:6 Heat Recovery Secondary Outlet Node, !- Exhaust Air Outlet Node Name 1414.563025, !- Nominal Electric Power {W} Yes, !- Supply Air Outlet Temperature Control Rotary, !- Heat Exchanger Type ExhaustOnly, !- Frost Control Type -23.3, !- Threshold Temperature {C} 0.167, !- Initial Defrost Time Fraction {dimensionless} 1.44; !- Rate of Defrost Time Fraction Increase {1/K} HeatExchanger:AirToAir:SensibleAndLatent, PSZ-AC_3:7 OA Heat Recovery, !- Name Always_On, !- Availability Schedule Name AUTOSIZE, !- Nominal Supply Air Flow Rate {m3/s} 0.70, !- Sensible Effectiveness at 100% Heating Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 100% Heating Air Flow {dimensionless} 0.70, !- Sensible Effectiveness at 75% Heating Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 75% Heating Air Flow {dimensionless} 0.75, !- Sensible Effectiveness at 100% Cooling Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 100% Cooling Air Flow {dimensionless} 0.75, !- Sensible Effectiveness at 75% Cooling Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 75% Cooling Air Flow {dimensionless} PSZ-AC_3:7_OAInlet Node, !- Supply Air Inlet Node Name PSZ-AC_3:7 Heat Recovery Outlet Node, !- Supply Air Outlet Node Name PSZ-AC_3:7_OARelief Node,!- Exhaust Air Inlet Node Name PSZ-AC_3:7 Heat Recovery Secondary Outlet Node, !- Exhaust Air Outlet Node Name 2966.759475, !- Nominal Electric Power {W} Yes, !- Supply Air Outlet Temperature Control Rotary, !- Heat Exchanger Type ExhaustOnly, !- Frost Control Type -23.3, !- Threshold Temperature {C} 0.167, !- Initial Defrost Time Fraction {dimensionless} 1.44; !- Rate of Defrost Time Fraction Increase {1/K} HeatExchanger:AirToAir:SensibleAndLatent, PSZ-AC_5:9 OA Heat Recovery, !- Name Always_On, !- Availability Schedule Name AUTOSIZE, !- Nominal Supply Air Flow Rate {m3/s} 0.70, !- Sensible Effectiveness at 100% Heating Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 100% Heating Air Flow {dimensionless} 0.70, !- Sensible Effectiveness at 75% Heating Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 75% Heating Air Flow {dimensionless} 0.75, !- Sensible Effectiveness at 100% Cooling Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 100% Cooling Air Flow {dimensionless} 0.75, !- Sensible Effectiveness at 75% Cooling Air Flow {dimensionless} 0.60, !- Latent Effectiveness at 75% Cooling Air Flow {dimensionless} PSZ-AC_5:9_OAInlet Node, !- Supply Air Inlet Node Name PSZ-AC_5:9 Heat Recovery Outlet Node, !- Supply Air Outlet Node Name PSZ-AC_5:9_OARelief Node,!- Exhaust Air Inlet Node Name PSZ-AC_5:9 Heat Recovery Secondary Outlet Node, !- Exhaust Air Outlet Node Name 2165.0752, !- Nominal Electric Power {W} Yes, !- Supply Air Outlet Temperature Control Rotary, !- Heat Exchanger Type ExhaustOnly, !- Frost Control Type -23.3, !- Threshold Temperature {C} 0.167, !- Initial Defrost Time Fraction {dimensionless} 1.44; !- Rate of Defrost Time Fraction Increase {1/K} !- =========== ALL OBJECTS IN CLASS: REFRIGERATION:CASE =========== Refrigeration:Case, Kitchen_ZN_1_FLR_1_Case:1_WALKINFREEZER, !- Name ALWAYS_ON, !- Availability Schedule Name Kitchen_ZN_1_FLR_1, !- Zone Name 23.8800, !- Rated Ambient Temperature {C} 55.0000, !- Rated Ambient Relative Humidity {percent} 734.0000, !- Rated Total Cooling Capacity per Unit Length {W/m} 0.1000, !- Rated Latent Heat Ratio 0.4000, !- Rated Runtime Fraction 7.3200, !- Case Length {m} -23.0000, !- Case Operating Temperature {C} CaseTemperatureMethod, !- Latent Case Credit Curve Type Kitchen_ZN_1_FLR_1_Case:1_WALKINFREEZERSingleShelfHorizontal_LatentEnergyMult, !- Latent Case Credit Curve Name 19.51428571, !- Standard Case Fan Power per Unit Length {W/m} 19.51428571, !- Operating Case Fan Power per Unit Length {W/m} 33.0000, !- Standard Case Lighting Power per Unit Length {W/m} , !- Installed Case Lighting Power per Unit Length {W/m} walkin_occ_lght_sch, !- Case Lighting Schedule Name 1.0000, !- Fraction of Lighting Energy to Case 0.0000, !- Case Anti-Sweat Heater Power per Unit Length {W/m} 0.0000, !- Minimum Anti-Sweat Heater Power per Unit Length {W/m} None, !- Anti-Sweat Heater Control Type 0.0, !- Humidity at Zero Anti-Sweat Heater Energy {percent} 0.0, !- Case Height {m} 0.0000, !- Fraction of Anti-Sweat Heater Energy to Case 410.0000, !- Case Defrost Power per Unit Length {W/m} ELECTRIC, !- Case Defrost Type Kitchen_ZN_1_FLR_1_Case:1_WALKINFREEZER_CaseDefrost2aDaySched, !- Case Defrost Schedule Name Kitchen_ZN_1_FLR_1_Case:1_WALKINFREEZER_CaseDripDown2aDaySched, !- Case Defrost Drip-Down Schedule Name None, !- Defrost Energy Correction Curve Type , !- Defrost Energy Correction Curve Name 0.0000, !- Under Case HVAC Return Air Fraction Kitchen_ZN_1_FLR_1_Case:1_WALKINFREEZER_WalkInStockingSched, !- Refrigerated Case Restocking Schedule Name Kitchen_ZN_1_FLR_1_Case:1_WALKINFREEZER_CaseCreditReduxSched; !- Case Credit Fraction Schedule Name Refrigeration:Case, Kitchen_ZN_1_FLR_1_Case:2_SELFCONTAINEDDISPLAYCASE, !- Name ALWAYS_ON, !- Availability Schedule Name Kitchen_ZN_1_FLR_1, !- Zone Name 23.8800, !- Rated Ambient Temperature {C} 55.0000, !- Rated Ambient Relative Humidity {percent} 734.0000, !- Rated Total Cooling Capacity per Unit Length {W/m} 0.0800, !- Rated Latent Heat Ratio 0.8500, !- Rated Runtime Fraction 7.3200, !- Case Length {m} 2.0000, !- Case Operating Temperature {C} CaseTemperatureMethod, !- Latent Case Credit Curve Type Kitchen_ZN_1_FLR_1_Case:2_SELFCONTAINEDDISPLAYCASEMultiShelfVertical_LatentEnergyMult, !- Latent Case Credit Curve Name 15.71428571, !- Standard Case Fan Power per Unit Length {W/m} 15.71428571, !- Operating Case Fan Power per Unit Length {W/m} 33.0000, !- Standard Case Lighting Power per Unit Length {W/m} , !- Installed Case Lighting Power per Unit Length {W/m} walkin_occ_lght_sch, !- Case Lighting Schedule Name 1.0000, !- Fraction of Lighting Energy to Case 0.0000, !- Case Anti-Sweat Heater Power per Unit Length {W/m} 0.0000, !- Minimum Anti-Sweat Heater Power per Unit Length {W/m} None, !- Anti-Sweat Heater Control Type 0.0, !- Humidity at Zero Anti-Sweat Heater Energy {percent} 0.0, !- Case Height {m} 0.2000, !- Fraction of Anti-Sweat Heater Energy to Case 0.0000, !- Case Defrost Power per Unit Length {W/m} NONE, !- Case Defrost Type , !- Case Defrost Schedule Name , !- Case Defrost Drip-Down Schedule Name None, !- Defrost Energy Correction Curve Type , !- Defrost Energy Correction Curve Name 0.0500, !- Under Case HVAC Return Air Fraction Kitchen_ZN_1_FLR_1_Case:2_SELFCONTAINEDDISPLAYCASE_CaseStockingSched; !- Refrigerated Case Restocking Schedule Name !- =========== ALL OBJECTS IN CLASS: REFRIGERATION:COMPRESSORRACK =========== Refrigeration:CompressorRack, RACK1, !- Name ZONE, !- Heat Rejection Location 2.34, !- Design Compressor Rack COP {W/W} RACK1_RackCOPfTCurve, !- Compressor Rack COP Function of Temperature Curve Name 750.0000, !- Design Condenser Fan Power {W} RACK1_RackCondFanCurve2, !- Condenser Fan Power Function of Temperature Curve Name AIRCOOLED, !- Condenser Type , !- Water-Cooled Condenser Inlet Node Name , !- Water-Cooled Condenser Outlet Node Name , !- Water-Cooled Loop Flow Type , !- Water-Cooled Condenser Outlet Temperature Schedule Name , !- Water-Cooled Condenser Design Flow Rate {m3/s} , !- Water-Cooled Condenser Maximum Flow Rate {m3/s} , !- Water-Cooled Condenser Maximum Water Outlet Temperature {C} , !- Water-Cooled Condenser Minimum Water Inlet Temperature {C} , !- Evaporative Condenser Availability Schedule Name , !- Evaporative Condenser Effectiveness {dimensionless} , !- Evaporative Condenser Air Flow Rate {m3/s} , !- Basin Heater Capacity {W/K} , !- Basin Heater Setpoint Temperature {C} , !- Design Evaporative Condenser Water Pump Power {W} , !- Evaporative Water Supply Tank Name RACK1_condenserInlet, !- Condenser Air Inlet Node Name LowTempRefrigeration, !- End-Use Subcategory RACK1CaseList; !- Refrigeration Case Name or WalkIn Name or CaseAndWalkInList Name Refrigeration:CaseAndWalkInList, RACK1CaseList, !- Name Kitchen_ZN_1_FLR_1_Case:1_WALKINFREEZER; !- Case or WalkIn 1 Name Refrigeration:CompressorRack, RACK2, !- Name ZONE, !- Heat Rejection Location 7.12, !- Design Compressor Rack COP {W/W} RACK2_RackCOPfTCurve, !- Compressor Rack COP Function of Temperature Curve Name 750.0000, !- Design Condenser Fan Power {W} , !- Condenser Fan Power Function of Temperature Curve Name AIRCOOLED, !- Condenser Type , !- Water-Cooled Condenser Inlet Node Name , !- Water-Cooled Condenser Outlet Node Name , !- Water-Cooled Loop Flow Type , !- Water-Cooled Condenser Outlet Temperature Schedule Name , !- Water-Cooled Condenser Design Flow Rate {m3/s} , !- Water-Cooled Condenser Maximum Flow Rate {m3/s} , !- Water-Cooled Condenser Maximum Water Outlet Temperature {C} , !- Water-Cooled Condenser Minimum Water Inlet Temperature {C} , !- Evaporative Condenser Availability Schedule Name , !- Evaporative Condenser Effectiveness {dimensionless} , !- Evaporative Condenser Air Flow Rate {m3/s} , !- Basin Heater Capacity {W/K} , !- Basin Heater Setpoint Temperature {C} , !- Design Evaporative Condenser Water Pump Power {W} , !- Evaporative Water Supply Tank Name RACK2_condenserInlet, !- Condenser Air Inlet Node Name MedTempRefrigeration, !- End-Use Subcategory RACK2CaseList; !- Refrigeration Case Name or WalkIn Name or CaseAndWalkInList Name Refrigeration:CaseAndWalkInList, RACK2CaseList, !- Name Kitchen_ZN_1_FLR_1_Case:2_SELFCONTAINEDDISPLAYCASE; !- Case or WalkIn 1 Name !- =========== ALL OBJECTS IN CLASS: VENTILATION =========== !- =========== ALL OBJECTS IN CLASS: WATERUSE:EQUIPMENT =========== WaterUse:Equipment, Bathrooms_ZN_1_FLR_1 SHW_default, !- Name WaterUse, !- End-Use Subcategory 7.39764e-05, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name Bathrooms_ZN_1_FLR_1 SHW_default Temp Sched, !- Target Temperature Schedule Name Bathrooms_ZN_1_FLR_1 SHW_default Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Bathrooms_ZN_1_FLR_1, !- Zone Name Bathrooms_ZN_1_FLR_1 SHW_default Sensible fract sched, !- Sensible Fraction Schedule Name Bathrooms_ZN_1_FLR_1 SHW_default Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, Bathrooms_ZN_1_FLR_2 SHW_default, !- Name WaterUse, !- End-Use Subcategory 7.39764e-05, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name Bathrooms_ZN_1_FLR_2 SHW_default Temp Sched, !- Target Temperature Schedule Name Bathrooms_ZN_1_FLR_2 SHW_default Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Bathrooms_ZN_1_FLR_2, !- Zone Name Bathrooms_ZN_1_FLR_2 SHW_default Sensible fract sched, !- Sensible Fraction Schedule Name Bathrooms_ZN_1_FLR_2 SHW_default Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, Kitchen_ZN_1_FLR_1 SHW_default, !- Name WaterUse, !- End-Use Subcategory 3.33647118454045E-4, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name Kitchen_ZN_1_FLR_1 SHW_default Temp Sched, !- Target Temperature Schedule Name Kitchen_ZN_1_FLR_1 SHW_default Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Kitchen_ZN_1_FLR_1, !- Zone Name Kitchen_ZN_1_FLR_1 SHW_default Sensible fract sched, !- Sensible Fraction Schedule Name Kitchen_ZN_1_FLR_1 SHW_default Latent fract sched; !- Latent Fraction Schedule Name !- =========== ALL OBJECTS IN CLASS: WATERUSE:CONNECTIONS =========== WaterUse:Connections, Bathrooms_ZN_1_FLR_1 SHW_default, !- Name Bathrooms_ZN_1_FLR_1 SHW_default Water Inlet Node, !- Inlet Node Name Bathrooms_ZN_1_FLR_1 SHW_default Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Bathrooms_ZN_1_FLR_1 SHW_default; !- Water Use Equipment 1 Name WaterUse:Connections, Bathrooms_ZN_1_FLR_2 SHW_default, !- Name Bathrooms_ZN_1_FLR_2 SHW_default Water Inlet Node, !- Inlet Node Name Bathrooms_ZN_1_FLR_2 SHW_default Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Bathrooms_ZN_1_FLR_2 SHW_default; !- Water Use Equipment 1 Name WaterUse:Connections, Kitchen_ZN_1_FLR_1 SHW_default, !- Name Kitchen_ZN_1_FLR_1 SHW_default Water Inlet Node, !- Inlet Node Name Kitchen_ZN_1_FLR_1 SHW_default Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Kitchen_ZN_1_FLR_1 SHW_default; !- Water Use Equipment 1 Name !No PV for this case !- =========== ALL OBJECTS IN CLASS: CURVE:QUADRATIC =========== Curve:Quadratic, RACK1_RackCOPfTCurve, !- Name 1.7603, !- Coefficient1 Constant -0.0377, !- Coefficient2 x 0.0004, !- Coefficient3 x**2 10.0000, !- Minimum Value of x 35.0000; !- Maximum Value of x Curve:Quadratic, RACK1_RackCondFanCurve2, !- Name 0.0000, !- Coefficient1 Constant 0.0286, !- Coefficient2 x 0.0000, !- Coefficient3 x**2 0.0000, !- Minimum Value of x 35.0000; !- Maximum Value of x Curve:Quadratic, RACK2_RackCOPfTCurve, !- Name 1.0000, !- Coefficient1 Constant 0.0000, !- Coefficient2 x 0.0000, !- Coefficient3 x**2 0.0000, !- Minimum Value of x 50.0000; !- Maximum Value of x Curve:Quadratic, PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_CapFF, !- Name 0.77136, !- Coefficient1 Constant 0.34053, !- Coefficient2 x -0.11088, !- Coefficient3 x**2 0.75918, !- Minimum Value of x 1.13877; !- Maximum Value of x Curve:Quadratic, PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_EIRFFF, !- Name 1.20550, !- Coefficient1 Constant -0.32953, !- Coefficient2 x 0.12308, !- Coefficient3 x**2 0.75918, !- Minimum Value of x 1.13877; !- Maximum Value of x Curve:Quadratic, PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_PLR, !- Name 0.77100, !- Coefficient1 Constant 0.22900, !- Coefficient2 x 0.0, !- Coefficient3 x**2 0.0, !- Minimum Value of x 1.0; !- Maximum Value of x !- =========== ALL OBJECTS IN CLASS: CURVE:CUBIC =========== Curve:Cubic, Kitchen_ZN_1_FLR_1_Case:1_WALKINFREEZERSingleShelfHorizontal_LatentEnergyMult, !- Name 0.0236, !- Coefficient1 Constant 0.0006, !- Coefficient2 x 0.0000, !- Coefficient3 x**2 0.0000, !- Coefficient4 x**3 -35.0, !- Minimum Value of x 20.0; !- Maximum Value of x Curve:Cubic, Kitchen_ZN_1_FLR_1_Case:2_SELFCONTAINEDDISPLAYCASEMultiShelfVertical_LatentEnergyMult, !- Name 0.026526281, !- Coefficient1 Constant 0.001078032, !- Coefficient2 x 0.0000602558, !- Coefficient3 x**2 0.00000123732, !- Coefficient4 x**3 -35.0, !- Minimum Value of x 20.0; !- Maximum Value of x !- =========== ALL OBJECTS IN CLASS: CURVE:BIQUADRATIC =========== Curve:Biquadratic, PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_CapFT, !- Name 0.42415, !- Coefficient1 Constant 0.04426, !- Coefficient2 x -0.00042, !- Coefficient3 x**2 0.00333, !- Coefficient4 y -0.00008, !- Coefficient5 y**2 -0.00021, !- Coefficient6 x*y 17.00000, !- Minimum Value of x 22.00000, !- Maximum Value of x 29.00000, !- Minimum Value of y 46.00000; !- Maximum Value of y Curve:Biquadratic, PSZ-AC_CoolCLennoxStandard10Ton_TGA120S2B_EIRFT, !- Name 1.23649, !- Coefficient1 Constant -0.02431, !- Coefficient2 x 0.00057, !- Coefficient3 x**2 -0.01434, !- Coefficient4 y 0.00063, !- Coefficient5 y**2 -0.00038, !- Coefficient6 x*y 17.00000, !- Minimum Value of x 22.00000, !- Maximum Value of x 29.00000, !- Minimum Value of y 46.00000; !- Maximum Value of y !- Set of chiller curves based on Dick Lord's study dated January 17, 2010... !- Hospital and Large Office have water cooled chillers...Hence set of water cooled chillers to be used in these prototypes... !- Large Office will follow 90.1-2010 Path B in the PI case whereas Hospital will follow Path A based on the discussion with the SWG !- Changed the min. chiller condenser fluid entering temperature to 64 F (17.78 deg C) for water cooled chillers based on Dick's email dated June 4, 2010 !- and 55 F (12.7 deg C) for air cooled chillers !- based on email string and energyplus support clarification dated June 1, 2010...also changed the upper limit for air cooled chillers to 125 F (51.67 deg C) !- and the water cooled chillers to 115 F (46.11 deg C) later the same day... ! Temporary changes to address Dick's wrong PLR curves. On Oct. 27, 2010 ! Water cooled chiller PLR curve comes from E+ data library "ReformEIRChiller Carrier 19FA 5651kW/5.50COP/Vanes EIRFPLR" ! Air-cooled chiller PLR comes from the original curve before addendum M. !- Water cooled chillers: Positive Displacement chillers... !- 90.1-2004 and 2007 Baseline curves... Curve:Biquadratic, WC_PD_2004_CAPFT, !- Name 0.9061150, !- Coefficient1 Constant 0.0292277, !- Coefficient2 x -0.0003647, !- Coefficient3 x**2 -0.0009709, !- Coefficient4 y -0.0000905, !- Coefficient5 y**2 0.0002527, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Biquadratic, WC_PD_2004_EIRFT, !- Name 0.3617105, !- Coefficient1 Constant -0.0229833, !- Coefficient2 x 0.0009519, !- Coefficient3 x**2 0.0131889, !- Coefficient4 y 0.0003752, !- Coefficient5 y**2 -0.0007059, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Bicubic, WC_PD_LT75_2004_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_PD_75TO150_2004_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_PD_150TO300_2004_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_PD_GT300_2004_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y !- 90.1-2010 Path A curves... Curve:Biquadratic, WC_PD_LT150_2010_PA_CAPFT, !- Name 0.9061150, !- Coefficient1 Constant 0.0292277, !- Coefficient2 x -0.0003647, !- Coefficient3 x**2 -0.0009709, !- Coefficient4 y -0.0000905, !- Coefficient5 y**2 0.0002527, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Biquadratic, WC_PD_LT150_2010_PA_EIRFT, !- Name 0.3617105, !- Coefficient1 Constant -0.0229833, !- Coefficient2 x 0.0009519, !- Coefficient3 x**2 0.0131889, !- Coefficient4 y 0.0003752, !- Coefficient5 y**2 -0.0007059, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Biquadratic, WC_PD_GT150_2010_PA_CAPFT, !- Name 0.9061150, !- Coefficient1 Constant 0.0292277, !- Coefficient2 x -0.0003647, !- Coefficient3 x**2 -0.0009709, !- Coefficient4 y -0.0000905, !- Coefficient5 y**2 0.0002527, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Biquadratic, WC_PD_GT150_2010_PA_EIRFT, !- Name 0.3773115, !- Coefficient1 Constant -0.0229032, !- Coefficient2 x 0.0016504, !- Coefficient3 x**2 0.0118156, !- Coefficient4 y 0.0004345, !- Coefficient5 y**2 -0.0010132, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Bicubic, WC_PD_LT75_2010_PA_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_PD_75TO150_2010_PA_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_PD_150TO300_2010_PA_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_PD_GT300_2010_PA_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y !- 90.1-2010 Path B curves.. Curve:Biquadratic, WC_PD_2010_PB_CAPFT, !- Name 0.9061171, !- Coefficient1 Constant 0.0292267, !- Coefficient2 x -0.0003665, !- Coefficient3 x**2 -0.0009698, !- Coefficient4 y -0.0000907, !- Coefficient5 y**2 0.0002535, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Biquadratic, WC_PD_2010_PB_EIRFT, !- Name 0.3617782, !- Coefficient1 Constant -0.0230016, !- Coefficient2 x 0.0009672, !- Coefficient3 x**2 0.0131801, !- Coefficient4 y 0.0003761, !- Coefficient5 y**2 -0.0007121, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Bicubic, WC_PD_LT75_2010_PB_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_PD_75TO150_2010_PB_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_PD_150TO300_2010_PB_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_PD_GT300_2010_PB_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y !- Water cooled chillers: Centrifugal Chillers... !- 90.1-2004 Baseline curves... Curve:Biquadratic, WC_Cent_LT150_2004_CAPFT, !- Name 0.7446451, !- Coefficient1 Constant 0.0114858, !- Coefficient2 x 0.0000148, !- Coefficient3 x**2 0.0224010, !- Coefficient4 y -0.0006880, !- Coefficient5 y**2 0.0009839, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Biquadratic, WC_Cent_LT150_2004_EIRFT, !- Name 0.7728770, !- Coefficient1 Constant 0.0221010, !- Coefficient2 x -0.0000799, !- Coefficient3 x**2 -0.0070045, !- Coefficient4 y 0.0004763, !- Coefficient5 y**2 -0.0010612, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Biquadratic, WC_Cent_GT150_2004_CAPFT, !- Name 0.7600172, !- Coefficient1 Constant 0.0147432, !- Coefficient2 x 0.0002144, !- Coefficient3 x**2 0.0207218, !- Coefficient4 y -0.0006425, !- Coefficient5 y**2 0.0008007, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Biquadratic, WC_Cent_GT150_2004_EIRFT, !- Name 0.6772577, !- Coefficient1 Constant 0.0117857, !- Coefficient2 x -0.0001967, !- Coefficient3 x**2 0.0014414, !- Coefficient4 y 0.0003005, !- Coefficient5 y**2 -0.0006807, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Bicubic, WC_Cent_LT150_2004_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_Cent_150TO300_2004_EIRFPLR,!- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_Cent_GT300_2004_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y !- 90.1-2010 Path A curves... Curve:Biquadratic, WC_Cent_2010_PA_CAPFT, !- Name 0.7600172, !- Coefficient1 Constant 0.0147432, !- Coefficient2 x 0.0002144, !- Coefficient3 x**2 0.0207218, !- Coefficient4 y -0.0006425, !- Coefficient5 y**2 0.0008007, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Biquadratic, WC_Cent_2010_PA_EIRFT, !- Name 0.6772577, !- Coefficient1 Constant 0.0117857, !- Coefficient2 x -0.0001967, !- Coefficient3 x**2 0.0014414, !- Coefficient4 y 0.0003005, !- Coefficient5 y**2 -0.0006807, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Bicubic, WC_Cent_LT150_2010_PA_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_Cent_150TO300_2010_PA_EIRFPLR,!- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_Cent_300TO600_2010_PA_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_Cent_GT600_2010_PA_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y !- 90.1-2010 Path B curves... Curve:Biquadratic, WC_Cent_2010_PB_CAPFT, !- Name 0.5362340, !- Coefficient1 Constant 0.005581, !- Coefficient2 x -0.0013654, !- Coefficient3 x**2 0.0488966, !- Coefficient4 y -0.0012018, !- Coefficient5 y**2 0.0010523, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Biquadratic, WC_Cent_2010_PB_EIRFT, !- Name 1.0821822, !- Coefficient1 Constant 0.0042977, !- Coefficient2 x -0.0013182, !- Coefficient3 x**2 -0.0260781, !- Coefficient4 y 0.0008256, !- Coefficient5 y**2 -0.0006013, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 17.78, !- Minimum Value of y 46.11; !- Maximum Value of y Curve:Bicubic, WC_Cent_LT150_2010_PB_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_Cent_150TO300_2010_PB_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_Cent_300TO600_2010_PB_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y Curve:Bicubic, WC_Cent_GT600_2010_PB_EIRFPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y !- Air cooled chillers... !- 90.1-2004 Baseline curves... Curve:Biquadratic, AC_2004_CAPFT, !- Name 1.0433811, !- Coefficient1 Constant 0.0407077, !- Coefficient2 x 0.0004506, !- Coefficient3 x**2 -0.0041514, !- Coefficient4 y -0.0000886, !- Coefficient5 y**2 -0.0003467, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 12.7, !- Minimum Value of y 51.67; !- Maximum Value of y Curve:Biquadratic, AC_2004_EIRFT, !- Name 0.5961915, !- Coefficient1 Constant -0.0099496, !- Coefficient2 x 0.0007888, !- Coefficient3 x**2 0.0004506, !- Coefficient4 y 0.0004875, !- Coefficient5 y**2 -0.0007623, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 12.7, !- Minimum Value of y 51.67; !- Maximum Value of y Curve:Quadratic, AC_LT150_2004_EIRFPLR, !- Name 0.1410, !- Coefficient1 Constant 0.6550, !- Coefficient2 x 0.2030, !- Coefficient3 x**2 0.0000, !- Minimum Value of x 1.0000; !- Maximum Value of x Curve:Quadratic, AC_GT150_2004_EIRFPLR, !- Name 0.1410, !- Coefficient1 Constant 0.6550, !- Coefficient2 x 0.2030, !- Coefficient3 x**2 0.0000, !- Minimum Value of x 1.0000; !- Maximum Value of x !- 90.1-2010 Path A curves... Curve:Biquadratic, AC_2010_PA_CAPFT, !- Name 1.0433825, !- Coefficient1 Constant 0.0407073, !- Coefficient2 x 0.0004506, !- Coefficient3 x**2 -0.0041514, !- Coefficient4 y -0.0000886, !- Coefficient5 y**2 -0.0003467, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 12.7, !- Minimum Value of y 51.67; !- Maximum Value of y Curve:Biquadratic, AC_2010_PA_EIRFT, !- Name 0.5961907, !- Coefficient1 Constant -0.0099493, !- Coefficient2 x 0.0007888, !- Coefficient3 x**2 0.0004506, !- Coefficient4 y 0.0004875, !- Coefficient5 y**2 -0.0007623, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 12.7, !- Minimum Value of y 51.67; !- Maximum Value of y Curve:Quadratic, AC_LT150_2010_PA_EIRFPLR, !- Name 0.1410, !- Coefficient1 Constant 0.6550, !- Coefficient2 x 0.2030, !- Coefficient3 x**2 0.0000, !- Minimum Value of x 1.0000; !- Maximum Value of x Curve:Quadratic, AC_GT150_2010_PA_EIRFPLR, !- Name 0.1410, !- Coefficient1 Constant 0.6550, !- Coefficient2 x 0.2030, !- Coefficient3 x**2 0.0000, !- Minimum Value of x 1.0000; !- Maximum Value of x !- =========== ALL OBJECTS IN CLASS: CURVE:BIQUADRATIC =========== !***** Following curve is from Dick Lord's Chiller Model study for ASHRAE 2007 baseline ***** Curve:Biquadratic, ChillerCentCapFT, !- Name 0.7446451, !- Coefficient1 Constant 0.0114858, !- Coefficient2 x 0.0000148, !- Coefficient3 x**2 0.0224010, !- Coefficient4 y -0.0006880, !- Coefficient5 y**2 0.0009839, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 24.0000, !- Minimum Value of y 35.0000; !- Maximum Value of y !***** Following curve is from Dick Lord's Chiller Model study for ASHRAE 2007 baseline ***** Curve:Biquadratic, ChillerCentEIRFT, !- Name 0.7728770, !- Coefficient1 Constant 0.0221010, !- Coefficient2 x -0.0000799, !- Coefficient3 x**2 -0.0070045, !- Coefficient4 y 0.0004763, !- Coefficient5 y**2 -0.0010612, !- Coefficient6 x*y 5.0000, !- Minimum Value of x 10.0000, !- Maximum Value of x 24.0000, !- Minimum Value of y 35.0000; !- Maximum Value of y !- =========== ALL OBJECTS IN CLASS: CURVE:BICUBIC =========== !***** Following curve is from Dick Lord's Chiller Model study for ASHRAE 2007 baseline ***** Curve:Bicubic, ChillerCentEIRPLR, !- Name -1.360532E-01, !- Coefficient1 Constant 8.642703E-03, !- Coefficient2 x 3.855583E-06, !- Coefficient3 x**2 1.024034E+00, !- Coefficient4 y 6.047444E-02, !- Coefficient5 y**2 -8.947860E-03, !- Coefficient6 x*y 0.000000E+00, !- Coefficient7 x**3 5.706602E-02, !- Coefficient8 y**3 0.000000E+00, !- Coefficient9 x**2*y 0.000000E+00, !- Coefficient10 x*y**2 31.13, !- Minimum Value of x 36.52, !- Maximum Value of x 0.19, !- Minimum Value of y 1.03; !- Maximum Value of y !- =========== ALL OBJECTS IN CLASS: OUTPUT:REPORTS =========== Output:Surfaces:Drawing,DXF; Output:Surfaces:List,Details; Output:VariableDictionary,IDF; Output:Constructions,Constructions; !- =========== ALL OBJECTS IN CLASS: OUTPUT:TABLE:SUMMARYREPORTS =========== Output:Table:SummaryReports, AllSummaryAndMonthly, !- Report 1 Name Standard62.1Summary; !- Report 2 Name !- =========== ALL OBJECTS IN CLASS: OUTPUT:TABLE:MONTHLY =========== Output:Table:Monthly, NameHolderMonthlySummary TaskPurpose ProgressIndicator, !- Name ProgressIndicator,ForDetermination2019, ... 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary CodeName ASHRAE901, !- Name ASHRAE901, ASHRAE1891, IECC, Title24, ORSC, IGCC, ... 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary CodeYear 2019, !- Name all years for ASHRAE90.1, IECC, ASHRAE189.1 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary CodeAmendment NoneAmend, !- Name StateAmend,EEM, NoneAmend for national or state without amendment 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary PrototypeName SchoolSecondary, !- Name 16 Prototypes 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary TaskScope National, !- Name National, State, City 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary State National, !- Name National for national analysis, NewYork, Utah,... for state analysis, or city name for city analysis. Spell out the name of the state without space between words 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary ClimateZone 6A, !- Name 0-8 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 Output:Table:Monthly, NameHolderMonthlySummary RepresentCity USA_MN_Rochester, !- Name representative city like Honolulu for national, for each state, for city analysis. this is not the city of the weather file. The weather city will be extracted from epw file 3, !- Digits After Decimal Site Outdoor Air Drybulb, !- Variable or Meter 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 Heating:Gas, !- Variable or Meter 2 Name SumOrAverage; !- Aggregation Type for Variable or Meter 2 !- =========== ALL OBJECTS IN CLASS: OUTPUTCONTROL:TABLE:STYLE =========== OutputControl:Table:Style, commaAndHTML; !- Column Separator !- =========== ALL OBJECTS IN CLASS: OUTPUTCONTROL:REPORTINGTOLERANCES =========== OutputControl:ReportingTolerances, 0.556, !- Tolerance for Time Heating Setpoint Not Met {deltaC} 0.556; !- Tolerance for Time Cooling Setpoint Not Met {deltaC} !- =========== ALL OBJECTS IN CLASS: OUTPUT:VARIABLE =========== ! ! site ! ! Output:Variable,*,Site Outdoor Air Drybulb Temperature,Hourly; ! Output:Variable,*,Site Outdoor Air Wetbulb Temperature,Hourly; ! Output:Variable,HVACOperationSchd,Schedule Value,Hourly; ! ! ! outdoor air flow rate ! ! Output:Variable,VAV_POD_1_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_POD_2_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_POD_3_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_OTHER_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PSZ-AC_1:5_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PSZ-AC_2:6_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PSZ-AC_3:7_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PSZ-AC_4:8_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PSZ-AC_5:9_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! ! Return Air flow ! ! Output:Variable,VAV_POD_1 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_POD_2 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_POD_3 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_OTHER Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PSZ-AC_1:5 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PSZ-AC_2:6 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PSZ-AC_3:7 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PSZ-AC_4:8 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PSZ-AC_5:9 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! ! Return Air flow ! ! Output:Variable,VAV_POD_1 Supply Equipment Inlet Node,System Node Temperature,Hourly; ! Output:Variable,VAV_POD_2 Supply Equipment Inlet Node,System Node Temperature,Hourly; ! Output:Variable,VAV_POD_3 Supply Equipment Inlet Node,System Node Temperature,Hourly; ! Output:Variable,VAV_OTHER Supply Equipment Inlet Node,System Node Temperature,Hourly; ! Output:Variable,PSZ-AC_1:5 Supply Equipment Inlet Node,System Node Temperature,Hourly; ! Output:Variable,PSZ-AC_2:6 Supply Equipment Inlet Node,System Node Temperature,Hourly; ! Output:Variable,PSZ-AC_3:7 Supply Equipment Inlet Node,System Node Temperature,Hourly; ! Output:Variable,PSZ-AC_4:8 Supply Equipment Inlet Node,System Node Temperature,Hourly; ! Output:Variable,PSZ-AC_5:9 Supply Equipment Inlet Node,System Node Temperature,Hourly; ! ! ! Return Air flow ! ! Output:Variable,VAV_POD_1 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,VAV_POD_2 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,VAV_POD_3 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,VAV_OTHER Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,PSZ-AC_1:5 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,PSZ-AC_2:6 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,PSZ-AC_3:7 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,PSZ-AC_4:8 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,PSZ-AC_5:9 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly; ! ! ! Supply Air flow ! ! Output:Variable,VAV_POD_1 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_POD_2 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_POD_3 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,VAV_OTHER Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PSZ-AC_1:5 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PSZ-AC_2:6 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PSZ-AC_3:7 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PSZ-AC_4:8 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! Output:Variable,PSZ-AC_5:9 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly; ! ! ! Supply Air flow ! ! Output:Variable,VAV_POD_1 Supply Equipment Outlet Node,System Node Temperature,Hourly; ! Output:Variable,VAV_POD_2 Supply Equipment Outlet Node,System Node Temperature,Hourly; ! Output:Variable,VAV_POD_3 Supply Equipment Outlet Node,System Node Temperature,Hourly; ! Output:Variable,VAV_OTHER Supply Equipment Outlet Node,System Node Temperature,Hourly; ! Output:Variable,PSZ-AC_1:5 Supply Equipment Outlet Node,System Node Temperature,Hourly; ! Output:Variable,PSZ-AC_2:6 Supply Equipment Outlet Node,System Node Temperature,Hourly; ! Output:Variable,PSZ-AC_3:7 Supply Equipment Outlet Node,System Node Temperature,Hourly; ! Output:Variable,PSZ-AC_4:8 Supply Equipment Outlet Node,System Node Temperature,Hourly; ! Output:Variable,PSZ-AC_5:9 Supply Equipment Outlet Node,System Node Temperature,Hourly; ! ! ! Supply Air flow ! ! Output:Variable,VAV_POD_1 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,VAV_POD_2 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,VAV_POD_3 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,VAV_OTHER Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,PSZ-AC_1:5 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,PSZ-AC_2:6 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,PSZ-AC_3:7 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,PSZ-AC_4:8 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! Output:Variable,PSZ-AC_5:9 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly; ! ! ! coil load ! ! Output:Variable,*,Air System Cooling Coil Total Cooling Energy,Hourly; ! Output:Variable,*,Air System Heating Coil Total Heating Energy,Hourly; ! ! ! Plant ! ! Output:Variable,*,Chiller Evaporator Cooling Rate,hourly; ! Output:Variable,*,Boiler Heating Rate,Hourly; ! ! ! SHW ! ! Output:Variable,*,Water Heater Heating Rate,Hourly; ! ! ! Fan and Pump ! ! Output:Variable,*,Fan Electric Power,hourly; !- HVAC Average W ! Output:Variable,*,Pump Electric Power,hourly; !- HVAC Average W ! Output:Variable,*,Humidifier Electric Power,hourly; !- HVAC Average W ! ! ! Utility and Submeter ! ! Output:Meter,Electricity:Facility,Hourly; ! Output:Meter,Gas:Facility,Hourly; ! Output:Meter,InteriorLights:Electricity,Hourly; ! Output:Meter,ExteriorLights:Electricity,Hourly; ! Output:Meter,InteriorEquipment:Electricity,Hourly; ! Output:Meter,ExteriorEquipment:Electricity,Hourly; ! Output:Meter,Fans:Electricity,Hourly; ! Output:Meter,Pumps:Electricity,Hourly; ! Output:Meter,Heating:Electricity,Hourly; ! Output:Meter,Cooling:Electricity,Hourly; ! Output:Meter,HeatRejection:Electricity,Hourly; ! Output:Meter,Humidifier:Electricity,Hourly; ! Output:Meter,HeatRecovery:Electricity,Hourly; ! Output:Meter,DHW:Electricity,Hourly; ! Output:Meter,Cogeneration:Electricity,Hourly; ! Output:Meter,Refrigeration:Electricity,Hourly; ! Output:Meter,WaterSystems:Electricity,Hourly; ! ! Output:Meter,InteriorLights:Gas,Hourly; ! Output:Meter,ExteriorLights:Gas,Hourly; ! Output:Meter,InteriorEquipment:Gas,Hourly; ! Output:Meter,ExteriorEquipment:Gas,Hourly; ! Output:Meter,Fans:Gas,Hourly; ! Output:Meter,Pumps:Gas,Hourly; ! Output:Meter,Heating:Gas,Hourly; ! Output:Meter,Cooling:Gas,Hourly; ! Output:Meter,HeatRejection:Gas,Hourly; ! Output:Meter,Humidifier:Gas,Hourly; ! Output:Meter,HeatRecovery:Gas,Hourly; ! Output:Meter,DHW:Gas,Hourly; ! Output:Meter,Cogeneration:Gas,Hourly; ! Output:Meter,Refrigeration:Gas,Hourly; ! Output:Meter,WaterSystems:Gas,Hourly; ! Output:Meter:MeterFileOnly,InteriorLights:Electricity,Hourly; Output:Meter:MeterFileOnly,InteriorEquipment:Electricity,Hourly; !- =========== ALL OBJECTS IN CLASS: CONTROLLER:MECHANICALVENTILATION =========== Controller:MechanicalVentilation, VAV_POD_1_MultiZone, !- Name MinOA_MotorizedDamper_Sched, !- Availability Schedule Name No, !- Demand Controlled Ventilation VentilationRateProcedure,!- System Outdoor Air Method , !- Zone Maximum Outdoor Air Fraction {dimensionless} Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Zone 1 Name Design_Spec_OA_Classroom, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Zone 2 Name Design_Spec_OA_Classroom, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Zone 3 Name Design_Spec_OA_Classroom, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Zone 4 Name Design_Spec_OA_Classroom, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Corridor_Pod_1_ZN_1_FLR_1, !- Zone 5 Name Design_Spec_OA_Corridor, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Corridor_Pod_1_ZN_1_FLR_2, !- Zone 1 Name Design_Spec_OA_Corridor, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Zone 2 Name Design_Spec_OA_Classroom, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Zone 3 Name Design_Spec_OA_Classroom, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Zone 4 Name Design_Spec_OA_Classroom, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Zone 5 Name Design_Spec_OA_Classroom, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1; !- Design Specification Zone Air Distribution Object Name DesignSpecification:ZoneAirDistribution, Design_Spec_ZAD_1, !- Name 1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless} 1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless} ; !- Zone Air Distribution Effectiveness Schedule Name DesignSpecification:OutdoorAir, Design_Spec_OA_Classroom,!- Name Sum, !- Outdoor Air Method 0.004719207, !- Outdoor Air Flow per Person {m3/s-person} 0.000609562; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, Design_Spec_OA_Corridor, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000304781; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} Controller:MechanicalVentilation, VAV_POD_2_MultiZone, !- Name MinOA_MotorizedDamper_Sched, !- Availability Schedule Name No, !- Demand Controlled Ventilation VentilationRateProcedure,!- System Outdoor Air Method , !- Zone Maximum Outdoor Air Fraction {dimensionless} Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Zone 1 Name Design_Spec_OA_Classroom, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Zone 2 Name Design_Spec_OA_Classroom, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Zone 3 Name Design_Spec_OA_Classroom, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Zone 4 Name Design_Spec_OA_Classroom, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Corridor_Pod_2_ZN_1_FLR_1, !- Zone 5 Name Design_Spec_OA_Corridor, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Corridor_Pod_2_ZN_1_FLR_2, !- Zone 1 Name Design_Spec_OA_Corridor, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Zone 2 Name Design_Spec_OA_Classroom, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Zone 3 Name Design_Spec_OA_Classroom, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Zone 4 Name Design_Spec_OA_Classroom, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Zone 5 Name Design_Spec_OA_Classroom, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1; !- Design Specification Zone Air Distribution Object Name Controller:MechanicalVentilation, VAV_POD_3_MultiZone, !- Name MinOA_MotorizedDamper_Sched, !- Availability Schedule Name No, !- Demand Controlled Ventilation VentilationRateProcedure,!- System Outdoor Air Method , !- Zone Maximum Outdoor Air Fraction {dimensionless} Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Zone 1 Name Design_Spec_OA_Classroom, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Zone 2 Name Design_Spec_OA_Classroom, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Zone 3 Name Design_Spec_OA_Classroom, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Zone 4 Name Design_Spec_OA_Classroom, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Corridor_Pod_3_ZN_1_FLR_1, !- Zone 5 Name Design_Spec_OA_Corridor, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Corridor_Pod_3_ZN_1_FLR_2, !- Zone 1 Name Design_Spec_OA_Corridor, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Zone 2 Name Design_Spec_OA_Classroom, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Zone 3 Name Design_Spec_OA_Classroom, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Zone 4 Name Design_Spec_OA_Classroom, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Zone 5 Name Design_Spec_OA_Classroom, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1; !- Design Specification Zone Air Distribution Object Name Controller:MechanicalVentilation, VAV_OTHER_MultiZone, !- Name MinOA_MotorizedDamper_Sched, !- Availability Schedule Name Yes, !- Demand Controlled Ventilation VentilationRateProcedure,!- System Outdoor Air Method , !- Zone Maximum Outdoor Air Fraction {dimensionless} Main_Corridor_ZN_1_FLR_1, !- Zone 1 Name Design_Spec_OA_Corridor, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Main_Corridor_ZN_1_FLR_2, !- Zone 2 Name Design_Spec_OA_Corridor, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Lobby_ZN_1_FLR_1, !- Zone 3 Name Design_Spec_OA_Lobby, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Lobby_ZN_1_FLR_2, !- Zone 4 Name Design_Spec_OA_Lobby, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Bathrooms_ZN_1_FLR_1, !- Zone 5 Name Design_Spec_OA_0, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Bathrooms_ZN_1_FLR_2, !- Zone 6 Name Design_Spec_OA_0, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Offices_ZN_1_FLR_1, !- Zone 7 Name Design_Spec_OA_Office, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Offices_ZN_1_FLR_2, !- Zone 7 Name Design_Spec_OA_Office, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Library_Media_Center_ZN_1_FLR_2, !- Zone 6 Name Design_Spec_OA_Library, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Mech_ZN_1_FLR_1, !- Zone 7 Name Design_Spec_OA_0, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1, !- Design Specification Zone Air Distribution Object Name Mech_ZN_1_FLR_2, !- Zone 7 Name Design_Spec_OA_0, !- Design Specification Outdoor Air Object Name Design_Spec_ZAD_1; !- Design Specification Zone Air Distribution Object Name DesignSpecification:OutdoorAir, Design_Spec_OA_Lobby, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000304781; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, Design_Spec_OA_0, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} ; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, Design_Spec_OA_Office, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} DesignSpecification:OutdoorAir, Design_Spec_OA_Library, !- Name Sum, !- Outdoor Air Method 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} 0.000863546; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} EnergyManagementSystem:Sensor, Facility_Int_LTG, !- Name , !- Output:Variable or Output:Meter Index Key Name InteriorLights:Electricity; !- Output:Variable or Output:Meter Name EnergyManagementSystem:GlobalVariable, Wired_LTG; !- Erl Variable 1 Name EnergyManagementSystem:Program, Transformer_Load_Prog, !- Name SET Wired_LTG = Facility_Int_LTG*0.0194; !- Program Line 1 EnergyManagementSystem:ProgramCallingManager, Transformer_Load_Prog_Manager, !- Name AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point Transformer_Load_Prog; !- Program Name 1 EnergyManagementSystem:OutputVariable, Wired_LTG, !- Name Wired_LTG, !- EMS Variable Name Summed, !- Type of Data in Variable ZoneTimeStep, !- Update Frequency , !- EMS Program or Subroutine Name J; !- Units Meter:Custom, Wired_LTG_Electricity, !- Name Electricity, !- Fuel Type , !- Key Name 1 Wired_LTG; !- Output Variable or Meter Name 1 Meter:CustomDecrement, Wired_Int_EQUIP, !- Name Electricity, !- Fuel Type InteriorEquipment:Electricity, !- Source Meter Name Mech_ZN_1_FLR_1_Elevators_Equip, !- Key Name 1 Electric Equipment Electric Energy; !- Output Variable or Meter Name 1 ElectricLoadCenter:Transformer, Transformer 1, !- Name Always_On, !- Availability Schedule Name PowerInFromGrid, !- Transformer Usage , !- Zone Name , !- Radiative Fraction 225000, !- Rated Capacity {VA} 3, !- Phase Aluminum, !- Conductor Material 150, !- Full Load Temperature Rise {C} 0.1, !- Fraction of Eddy Current Losses NominalEfficiency, !- Performance Input Method , !- Rated No Load Loss {W} , !- Rated Load Loss {W} 0.989, !- Nameplate Efficiency 0.35, !- Per Unit Load for Nameplate Efficiency 75, !- Reference Temperature for Nameplate Efficiency {C} , !- Per Unit Load for Maximum Efficiency Yes, !- Consider Transformer Loss for Utility Cost Wired_LTG_Electricity, !- Meter 1 Name Wired_INT_EQUIP; !- Meter 2 Name EnergyManagementSystem:Sensor, OAT_F, !- Name , !- Output:Variable or Output:Meter Index Key Name Site Outdoor Air Drybulb Temperature; !- Output:Variable or Output:Meter Name EnergyManagementSystem:GlobalVariable, BoilerType, !- Erl Variable 1 Name CapRated, !- Erl Variable 2 Name EtRated, !- Erl Variable 3 Name PLRx, !- Ecx, !- SkinLossRate; !- EnergyManagementSystem:Sensor, BoilerPLR, !- Name HeatSys1 Boiler, !- Output:Variable or Output:Meter Index Key Name Boiler Part Load Ratio; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Actuator, BoilerCurve, !- Name HEATSYS1 BOILER EFFICIENCY CURVE, !- Actuated Component Unique Name Curve, !- Actuated Component Type Curve Result; !- Actuated Component Control Type EnergyManagementSystem:Program, ! Addendum AM SetBoilerPar, SET CapRated = 885017.67, ! EMS Bolier Nominal Capacity {W}. SET EtRated = 0.8125, ! EMS Boiler Nominal Thermal Efficiency. overriden by script SET CapRated = (CapRated *3.412)/1000, !Change from W to MBH SET SkinLossRate = 0.02, SET BoilerType = 1, IF BoilerType == 1, IF CapRated >10000, SET PLRx = 0.2, ELSEIF CapRated >5000, SET PLRx = 0.25, ELSEIF CapRated >1000, SET PLRx = 0.33, ELSE, SET BoilerType = 2, SET PLRx = 0.2, ENDIF, ELSE, SET PLRx = 0.2, ENDIF, IF BoilerType == 1, SET CurveX = 0.975 + 0.305 * PLRx - 0.527 * (PLRx^2) + 0.249 * (PLRx^3), ELSE, SET CurveX = 0.907 + 0.320 * PLRx - 0.420 * (PLRx^2) + 0.193 * (PLRx^3), ENDIF, SET LoadX = CapRated * PLRx, SET Etx = CurveX * EtRated, SET InputEx = LoadX/Etx, SET SkinEx = CapRated * SkinLossRate, SET Ecx = (LoadX + SkinEx)/InputEx; EnergyManagementSystem:Program, SetBoilerCurve, !- Name IF BoilerPLR >= PLRx, !- Program Line 1 IF BoilerType == 1, !- Program Line 2 SET BoilerCurve = 0.975 + 0.305*BoilerPLR - 0.527*(BoilerPLR^2) + 0.249*(BoilerPLR^3), !- ELSE, !- SET BoilerCurve = 0.907 + 0.320*BoilerPLR - 0.420*(BoilerPLR^2) + 0.193*(BoilerPLR^3), !- ENDIF, !- ELSE, !- IF BoilerPLR == 0, !- SET BoilerCurve = NULL, !- ELSE, !- IF BoilerPLR <0.05, !- SET BoilerCurve = (0.05/(0.05 + SkinLossRate)) * (Ecx/EtRated), !- ELSE, !- SET BoilerCurve = (BoilerPLR/(BoilerPLR + SkinLossRate)) * (Ecx/EtRated), !- ENDIF, !- ENDIF, !- ENDIF; !- EnergyManagementSystem:ProgramCallingManager, BoilerParManager, !- Name BeginNewEnvironment, !- EnergyPlus Model Calling Point SetBoilerPar; !- Program Name 1 EnergyManagementSystem:ProgramCallingManager, BoilerCurveManager, !- Name InsideHVACSystemIterationLoop, !- EnergyPlus Model Calling Point SetBoilerCurve; !- Program Name 1 EnergyManagementSystem:Sensor, OAT, !- Name Environment, !- Output:Variable or Output:Meter Index Key Name Site Outdoor Air Drybulb Temperature; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Actuator, CLGSETP_SCH_Actuator, !- Name CLGSETP_SCH_Yes_Optimum, !- Actuated Component Unique Name Schedule:Compact, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:Actuator, CLGSETP_SCH_w_SB_Actuator, !- Name CLGSETP_SCH_Yes_Optimum_w_SB, !- Actuated Component Unique Name Schedule:Compact, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:Actuator, HTGSETP_SCH_Actuator, !- Name HTGSETP_SCH_Yes_Optimum, !- Actuated Component Unique Name Schedule:Compact, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:Actuator, HTGSETP_SCH_w_SB_Actuator, !- Name HTGSETP_SCH_Yes_Optimum_w_SB, !- Actuated Component Unique Name Schedule:Compact, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:ProgramCallingManager, OA_BASED_OPTIMUM_START_EMS_Program Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point OA_BASED_OPTIMUM_START_EMS_Program; !- Program Name 1 EnergyManagementSystem:Program, OA_BASED_OPTIMUM_START_EMS_Program, !- Name IF DaylightSavings==0 && DayOfWeek>1 && DayOfWeek<7 && Hour==6 && OAT<23.9 && OAT>1.7, !- Program Line 1 SET CLGSETP_SCH_Actuator = 29.44, !- Program Line 2 SET HTGSETP_SCH_Actuator = 15.6, !- SET CLGSETP_SCH_w_SB_Actuator = 29.44, !- SET HTGSETP_SCH_w_SB_Actuator = 15.6, !- ELSEIF DaylightSavings==1 && DayOfWeek>1 && DayOfWeek<7 && Hour==5 && OAT<23.9 && OAT>1.7, !- SET CLGSETP_SCH_Actuator = 29.44, !- SET HTGSETP_SCH_Actuator = 15.6, !- SET CLGSETP_SCH_w_SB_Actuator = 29.44, !- SET HTGSETP_SCH_w_SB_Actuator = 15.6, !- ELSE, !- SET CLGSETP_SCH_Actuator = NULL, !- SET HTGSETP_SCH_Actuator = NULL, !- SET CLGSETP_SCH_w_SB_Actuator = NULL, !- SET HTGSETP_SCH_w_SB_Actuator = NULL, !- ENDIF; !- EnergyManagementSystem:Sensor, ActualOccupancy, !- Name Offices Binary Occupancy, !- Output:Variable or Output:Meter Index Key Name Schedule Value; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, cCL1_Pod_1_ZN_1_FLR_1_LSr, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, cCL1_Pod_1_ZN_1_FLR_1_OSr, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, cCL1_Pod_1_ZN_1_FLR_1_Area, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, cCL1_Pod_1_ZN_1_FLR_1_LAr, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_cCL1_Pod_1_ZN_1_FLR_1_Light_EMS_Program, !- Name SET cCL1_Pod_1_ZN_1_FLR_1_LSr_IP=0.093*cCL1_Pod_1_ZN_1_FLR_1_LSr/cCL1_Pod_1_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (cCL1_Pod_1_ZN_1_FLR_1_OSr <= 0) && (cCL1_Pod_1_ZN_1_FLR_1_LSr_IP >= 0.02), SET cCL1_Pod_1_ZN_1_FLR_1_LAr = 0.02*cCL1_Pod_1_ZN_1_FLR_1_Area/0.09290304, ELSE, SET cCL1_Pod_1_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_cCL1_Pod_1_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_cCL1_Pod_1_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, mCl1_Pod_1_ZN_1_FLR_1_LSr, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, mCl1_Pod_1_ZN_1_FLR_1_OSr, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, mCl1_Pod_1_ZN_1_FLR_1_Area, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, mCl1_Pod_1_ZN_1_FLR_1_LAr, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_mCl1_Pod_1_ZN_1_FLR_1_Light_EMS_Program, !- Name SET mCl1_Pod_1_ZN_1_FLR_1_LSr_IP=0.093*mCl1_Pod_1_ZN_1_FLR_1_LSr/mCl1_Pod_1_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (mCl1_Pod_1_ZN_1_FLR_1_OSr <= 0) && (mCl1_Pod_1_ZN_1_FLR_1_LSr_IP >= 0.02), SET mCl1_Pod_1_ZN_1_FLR_1_LAr = 0.02*mCl1_Pod_1_ZN_1_FLR_1_Area/0.09290304, ELSE, SET mCl1_Pod_1_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_mCl1_Pod_1_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_mCl1_Pod_1_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, cPOD1_ZN_1_FLR_1_LSr, !- Name Corridor_Pod_1_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, cPOD1_ZN_1_FLR_1_OSr, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name and used "Corner_Class_1_Pod_1_ZN_1_FLR_1" Occupancy since this corridor is 0 people People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, cPOD1_ZN_1_FLR_1_Area, !- Name Corridor_Pod_1_ZN_1_FLR_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, cPOD1_ZN_1_FLR_1_LAr, !- Name Corridor_Pod_1_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_cPOD1_ZN_1_FLR_1_Light_EMS_Program, !- Name SET cPOD1_ZN_1_FLR_1_LSr_IP=0.093*cPOD1_ZN_1_FLR_1_LSr/cPOD1_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (cPOD1_ZN_1_FLR_1_OSr <= 0) && (cPOD1_ZN_1_FLR_1_LSr_IP >= 0.02), SET cPOD1_ZN_1_FLR_1_LAr = 0.02*cPOD1_ZN_1_FLR_1_Area/0.09290304, ELSE, SET cPOD1_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_cPOD1_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_cPOD1_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, cCL2_Pod_1_ZN_1_FLR_1_LSr, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, cCL2_Pod_1_ZN_1_FLR_1_OSr, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, cCL2_Pod_1_ZN_1_FLR_1_Area, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, cCL2_Pod_1_ZN_1_FLR_1_LAr, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_cCL2_Pod_1_ZN_1_FLR_1_Light_EMS_Program, !- Name SET cCL2_Pod_1_ZN_1_FLR_1_LSr_IP=0.093*cCL2_Pod_1_ZN_1_FLR_1_LSr/cCL2_Pod_1_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (cCL2_Pod_1_ZN_1_FLR_1_OSr <= 0) && (cCL2_Pod_1_ZN_1_FLR_1_LSr_IP >= 0.02), SET cCL2_Pod_1_ZN_1_FLR_1_LAr = 0.02*cCL2_Pod_1_ZN_1_FLR_1_Area/0.09290304, ELSE, SET cCL2_Pod_1_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_cCL2_Pod_1_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_cCL2_Pod_1_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, mCl2_Pod_1_ZN_1_FLR_1_LSr, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, mCl2_Pod_1_ZN_1_FLR_1_OSr, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, mCl2_Pod_1_ZN_1_FLR_1_Area, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, mCl2_Pod_1_ZN_1_FLR_1_LAr, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_mCl2_Pod_1_ZN_1_FLR_1_Light_EMS_Program, !- Name SET mCl2_Pod_1_ZN_1_FLR_1_LSr_IP=0.093*mCl2_Pod_1_ZN_1_FLR_1_LSr/mCl2_Pod_1_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (mCl2_Pod_1_ZN_1_FLR_1_OSr <= 0) && (mCl2_Pod_1_ZN_1_FLR_1_LSr_IP >= 0.02), SET mCl2_Pod_1_ZN_1_FLR_1_LAr = 0.02*mCl2_Pod_1_ZN_1_FLR_1_Area/0.09290304, ELSE, SET mCl2_Pod_1_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_mCl2_Pod_1_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_mCl2_Pod_1_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, cCL1_Pod_2_ZN_1_FLR_1_LSr, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, cCL1_Pod_2_ZN_1_FLR_1_OSr, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, cCL1_Pod_2_ZN_1_FLR_1_Area, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, cCL1_Pod_2_ZN_1_FLR_1_LAr, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_cCL1_Pod_2_ZN_1_FLR_1_Light_EMS_Program, !- Name SET cCL1_Pod_2_ZN_1_FLR_1_LSr_IP=0.093*cCL1_Pod_2_ZN_1_FLR_1_LSr/cCL1_Pod_2_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (cCL1_Pod_2_ZN_1_FLR_1_OSr <= 0) && (cCL1_Pod_2_ZN_1_FLR_1_LSr_IP >= 0.02), SET cCL1_Pod_2_ZN_1_FLR_1_LAr = 0.02*cCL1_Pod_2_ZN_1_FLR_1_Area/0.09290304, ELSE, SET cCL1_Pod_2_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_cCL1_Pod_2_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_cCL1_Pod_2_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, mCl1_Pod_2_ZN_1_FLR_1_LSr, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, mCl1_Pod_2_ZN_1_FLR_1_OSr, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, mCl1_Pod_2_ZN_1_FLR_1_Area, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, mCl1_Pod_2_ZN_1_FLR_1_LAr, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_mCl1_Pod_2_ZN_1_FLR_1_Light_EMS_Program, !- Name SET mCl1_Pod_2_ZN_1_FLR_1_LSr_IP=0.093*mCl1_Pod_2_ZN_1_FLR_1_LSr/mCl1_Pod_2_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (mCl1_Pod_2_ZN_1_FLR_1_OSr <= 0) && (mCl1_Pod_2_ZN_1_FLR_1_LSr_IP >= 0.02), SET mCl1_Pod_2_ZN_1_FLR_1_LAr = 0.02*mCl1_Pod_2_ZN_1_FLR_1_Area/0.09290304, ELSE, SET mCl1_Pod_2_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_mCl1_Pod_2_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_mCl1_Pod_2_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, cPOD2_ZN_1_FLR_1_LSr, !- Name Corridor_Pod_2_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, cPOD2_ZN_1_FLR_1_OSr, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name and used "Corner_Class_1_Pod_1_ZN_1_FLR_1" Occupancy since this corridor is 0 people People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, cPOD2_ZN_1_FLR_1_Area, !- Name Corridor_Pod_2_ZN_1_FLR_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, cPOD2_ZN_1_FLR_1_LAr, !- Name Corridor_Pod_2_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_cPOD2_ZN_1_FLR_1_Light_EMS_Program, !- Name SET cPOD2_ZN_1_FLR_1_LSr_IP=0.093*cPOD2_ZN_1_FLR_1_LSr/cPOD2_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (cPOD2_ZN_1_FLR_1_OSr <= 0) && (cPOD2_ZN_1_FLR_1_LSr_IP >= 0.02), SET cPOD2_ZN_1_FLR_1_LAr = 0.02*cPOD2_ZN_1_FLR_1_Area/0.09290304, ELSE, SET cPOD2_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_cPOD2_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_cPOD2_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, cCL2_Pod_2_ZN_1_FLR_1_LSr, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, cCL2_Pod_2_ZN_1_FLR_1_OSr, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, cCL2_Pod_2_ZN_1_FLR_1_Area, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, cCL2_Pod_2_ZN_1_FLR_1_LAr, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_cCL2_Pod_2_ZN_1_FLR_1_Light_EMS_Program, !- Name SET cCL2_Pod_2_ZN_1_FLR_1_LSr_IP=0.093*cCL2_Pod_2_ZN_1_FLR_1_LSr/cCL2_Pod_2_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (cCL2_Pod_2_ZN_1_FLR_1_OSr <= 0) && (cCL2_Pod_2_ZN_1_FLR_1_LSr_IP >= 0.02), SET cCL2_Pod_2_ZN_1_FLR_1_LAr = 0.02*cCL2_Pod_2_ZN_1_FLR_1_Area/0.09290304, ELSE, SET cCL2_Pod_2_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_cCL2_Pod_2_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_cCL2_Pod_2_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, mCl2_Pod_2_ZN_1_FLR_1_LSr, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, mCl2_Pod_2_ZN_1_FLR_1_OSr, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, mCl2_Pod_2_ZN_1_FLR_1_Area, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, mCl2_Pod_2_ZN_1_FLR_1_LAr, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_mCl2_Pod_2_ZN_1_FLR_1_Light_EMS_Program, !- Name SET mCl2_Pod_2_ZN_1_FLR_1_LSr_IP=0.093*mCl2_Pod_2_ZN_1_FLR_1_LSr/mCl2_Pod_2_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (mCl2_Pod_2_ZN_1_FLR_1_OSr <= 0) && (mCl2_Pod_2_ZN_1_FLR_1_LSr_IP >= 0.02), SET mCl2_Pod_2_ZN_1_FLR_1_LAr = 0.02*mCl2_Pod_2_ZN_1_FLR_1_Area/0.09290304, ELSE, SET mCl2_Pod_2_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_mCl2_Pod_2_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_mCl2_Pod_2_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, cCL1_Pod_3_ZN_1_FLR_1_LSr, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, cCL1_Pod_3_ZN_1_FLR_1_OSr, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, cCL1_Pod_3_ZN_1_FLR_1_Area, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, cCL1_Pod_3_ZN_1_FLR_1_LAr, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_cCL1_Pod_3_ZN_1_FLR_1_Light_EMS_Program, !- Name SET cCL1_Pod_3_ZN_1_FLR_1_LSr_IP=0.093*cCL1_Pod_3_ZN_1_FLR_1_LSr/cCL1_Pod_3_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (cCL1_Pod_3_ZN_1_FLR_1_OSr <= 0) && (cCL1_Pod_3_ZN_1_FLR_1_LSr_IP >= 0.02), SET cCL1_Pod_3_ZN_1_FLR_1_LAr = 0.02*cCL1_Pod_3_ZN_1_FLR_1_Area/0.09290304, ELSE, SET cCL1_Pod_3_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_cCL1_Pod_3_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_cCL1_Pod_3_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, mCl1_Pod_3_ZN_1_FLR_1_LSr, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, mCl1_Pod_3_ZN_1_FLR_1_OSr, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, mCl1_Pod_3_ZN_1_FLR_1_Area, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, mCl1_Pod_3_ZN_1_FLR_1_LAr, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_mCl1_Pod_3_ZN_1_FLR_1_Light_EMS_Program, !- Name SET mCl1_Pod_3_ZN_1_FLR_1_LSr_IP=0.093*mCl1_Pod_3_ZN_1_FLR_1_LSr/mCl1_Pod_3_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (mCl1_Pod_3_ZN_1_FLR_1_OSr <= 0) && (mCl1_Pod_3_ZN_1_FLR_1_LSr_IP >= 0.02), SET mCl1_Pod_3_ZN_1_FLR_1_LAr = 0.02*mCl1_Pod_3_ZN_1_FLR_1_Area/0.09290304, ELSE, SET mCl1_Pod_3_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_mCl1_Pod_3_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_mCl1_Pod_3_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, cPOD3_ZN_1_FLR_1_LSr, !- Name Corridor_Pod_3_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, cPOD3_ZN_1_FLR_1_OSr, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name and used "Corner_Class_1_Pod_1_ZN_1_FLR_1" Occupancy since this corridor is 0 people People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, cPOD3_ZN_1_FLR_1_Area, !- Name Corridor_Pod_3_ZN_1_FLR_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, cPOD3_ZN_1_FLR_1_LAr, !- Name Corridor_Pod_3_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_cPOD3_ZN_1_FLR_1_Light_EMS_Program, !- Name SET cPOD3_ZN_1_FLR_1_LSr_IP=0.093*cPOD3_ZN_1_FLR_1_LSr/cPOD3_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (cPOD3_ZN_1_FLR_1_OSr <= 0) && (cPOD3_ZN_1_FLR_1_LSr_IP >= 0.02), SET cPOD3_ZN_1_FLR_1_LAr = 0.02*cPOD3_ZN_1_FLR_1_Area/0.09290304, ELSE, SET cPOD3_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_cPOD3_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_cPOD3_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, cCL2_Pod_3_ZN_1_FLR_1_LSr, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, cCL2_Pod_3_ZN_1_FLR_1_OSr, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, cCL2_Pod_3_ZN_1_FLR_1_Area, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, cCL2_Pod_3_ZN_1_FLR_1_LAr, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_cCL2_Pod_3_ZN_1_FLR_1_Light_EMS_Program, !- Name SET cCL2_Pod_3_ZN_1_FLR_1_LSr_IP=0.093*cCL2_Pod_3_ZN_1_FLR_1_LSr/cCL2_Pod_3_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (cCL2_Pod_3_ZN_1_FLR_1_OSr <= 0) && (cCL2_Pod_3_ZN_1_FLR_1_LSr_IP >= 0.02), SET cCL2_Pod_3_ZN_1_FLR_1_LAr = 0.02*cCL2_Pod_3_ZN_1_FLR_1_Area/0.09290304, ELSE, SET cCL2_Pod_3_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_cCL2_Pod_3_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_cCL2_Pod_3_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, mCl2_Pod_3_ZN_1_FLR_1_LSr, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, mCl2_Pod_3_ZN_1_FLR_1_OSr, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, mCl2_Pod_3_ZN_1_FLR_1_Area, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, mCl2_Pod_3_ZN_1_FLR_1_LAr, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_mCl2_Pod_3_ZN_1_FLR_1_Light_EMS_Program, !- Name SET mCl2_Pod_3_ZN_1_FLR_1_LSr_IP=0.093*mCl2_Pod_3_ZN_1_FLR_1_LSr/mCl2_Pod_3_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (mCl2_Pod_3_ZN_1_FLR_1_OSr <= 0) && (mCl2_Pod_3_ZN_1_FLR_1_LSr_IP >= 0.02), SET mCl2_Pod_3_ZN_1_FLR_1_LAr = 0.02*mCl2_Pod_3_ZN_1_FLR_1_Area/0.09290304, ELSE, SET mCl2_Pod_3_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_mCl2_Pod_3_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_mCl2_Pod_3_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, AUX_GYM_ZN_1_FLR_1_LSr, !- Name AUX_GYM_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, AUX_GYM_ZN_1_FLR_1_OSr, !- Name AUX_GYM_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, AUX_GYM_ZN_1_FLR_1_Area, !- Name AUX_GYM_ZN_1_FLR_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, AUX_GYM_ZN_1_FLR_1_LAr, !- Name AUX_GYM_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_AUX_GYM_ZN_1_FLR_1_Light_EMS_Program, !- Name SET AUX_GYM_ZN_1_FLR_1_LSr_IP=0.093*AUX_GYM_ZN_1_FLR_1_LSr/AUX_GYM_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (AUX_GYM_ZN_1_FLR_1_OSr <= 0) && (AUX_GYM_ZN_1_FLR_1_LSr_IP >= 0.02), SET AUX_GYM_ZN_1_FLR_1_LAr = 0.02*AUX_GYM_ZN_1_FLR_1_Area/0.09290304, ELSE, SET AUX_GYM_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_AUX_GYM_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_AUX_GYM_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, AUDITORIUM_ZN_1_FLR_1_LSr, !- Name AUDITORIUM_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, AUDITORIUM_ZN_1_FLR_1_OSr, !- Name AUDITORIUM_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, AUDITORIUM_ZN_1_FLR_1_Area, !- Name AUDITORIUM_ZN_1_FLR_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, AUDITORIUM_ZN_1_FLR_1_LAr, !- Name AUDITORIUM_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_AUDITORIUM_ZN_1_FLR_1_Light_EMS_Program, !- Name SET AUDITORIUM_ZN_1_FLR_1_LSr_IP=0.093*AUDITORIUM_ZN_1_FLR_1_LSr/AUDITORIUM_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (AUDITORIUM_ZN_1_FLR_1_OSr <= 0) && (AUDITORIUM_ZN_1_FLR_1_LSr_IP >= 0.02), SET AUDITORIUM_ZN_1_FLR_1_LAr = 0.02*AUDITORIUM_ZN_1_FLR_1_Area/0.09290304, ELSE, SET AUDITORIUM_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_AUDITORIUM_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_AUDITORIUM_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Main_Corridor_ZN_1_FLR_1_LSr, !- Name Main_Corridor_ZN_1_FLR_1,!- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Main_Corridor_ZN_1_FLR_1_OSr, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name and used "Corner_Class_1_Pod_1_ZN_1_FLR_1" Occupancy since this lobby is 0 people People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Main_Corridor_ZN_1_FLR_1_Area, !- Name Main_Corridor_ZN_1_FLR_1,!- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Main_Corridor_ZN_1_FLR_1_LAr, !- Name Main_Corridor_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Main_Corridor_ZN_1_FLR_1_Light_EMS_Program, !- Name SET Main_Corridor_ZN_1_FLR_1_LSr_IP=0.093*Main_Corridor_ZN_1_FLR_1_LSr/Main_Corridor_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (Main_Corridor_ZN_1_FLR_1_OSr <= 0) && (Main_Corridor_ZN_1_FLR_1_LSr_IP >= 0.02), SET Main_Corridor_ZN_1_FLR_1_LAr = 0.02*Main_Corridor_ZN_1_FLR_1_Area/0.09290304, ELSE, SET Main_Corridor_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Main_Corridor_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Main_Corridor_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Lobby_ZN_1_FLR_1_LSr, !- Name Lobby_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Lobby_ZN_1_FLR_1_OSr, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name and used "Corner_Class_1_Pod_1_ZN_1_FLR_1" Occupancy since this lobby is 0 people People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Lobby_ZN_1_FLR_1_Area, !- Name Lobby_ZN_1_FLR_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Lobby_ZN_1_FLR_1_LAr, !- Name Lobby_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Lobby_ZN_1_FLR_1_Light_EMS_Program, !- Name SET Lobby_ZN_1_FLR_1_LSr_IP=0.093*Lobby_ZN_1_FLR_1_LSr/Lobby_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (Lobby_ZN_1_FLR_1_OSr <= 0) && (Lobby_ZN_1_FLR_1_LSr_IP >= 0.02), SET Lobby_ZN_1_FLR_1_LAr = 0.02*Lobby_ZN_1_FLR_1_Area/0.09290304, ELSE, SET Lobby_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Lobby_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Lobby_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Mech_ZN_1_FLR_1_LSr, !- Name Mech_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Mech_ZN_1_FLR_1_OSr, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name and used "Corner_Class_1_Pod_1_ZN_1_FLR_1" Occupancy since this Mechnical zone is 0 people People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Mech_ZN_1_FLR_1_Area, !- Name Mech_ZN_1_FLR_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Mech_ZN_1_FLR_1_LAr, !- Name Mech_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Mech_ZN_1_FLR_1_Light_EMS_Program, !- Name SET Mech_ZN_1_FLR_1_LSr_IP=0.093*Mech_ZN_1_FLR_1_LSr/Mech_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (Mech_ZN_1_FLR_1_OSr <= 0) && (Mech_ZN_1_FLR_1_LSr_IP >= 0.02), SET Mech_ZN_1_FLR_1_LAr = 0.02*Mech_ZN_1_FLR_1_Area/0.09290304, ELSE, SET Mech_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Mech_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Mech_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, BATHROOMS_ZN_1_FLR_1_LSr,!- Name BATHROOMS_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, BATHROOMS_ZN_1_FLR_1_OSr,!- Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name and used "Corner_Class_1_Pod_1_ZN_1_FLR_1" Occupancy since this Bath zone is 0 people People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, BATHROOMS_ZN_1_FLR_1_Area, !- Name BATHROOMS_ZN_1_FLR_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, BATHROOMS_ZN_1_FLR_1_LAr,!- Name BATHROOMS_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_BATHROOMS_ZN_1_FLR_1_Light_EMS_Program, !- Name SET BATHROOMS_ZN_1_FLR_1_LSr_IP=0.093*BATHROOMS_ZN_1_FLR_1_LSr/BATHROOMS_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (BATHROOMS_ZN_1_FLR_1_OSr <= 0) && (BATHROOMS_ZN_1_FLR_1_LSr_IP >= 0.02), SET BATHROOMS_ZN_1_FLR_1_LAr = 0.02*BATHROOMS_ZN_1_FLR_1_Area/0.09290304, ELSE, SET BATHROOMS_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_BATHROOMS_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_BATHROOMS_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Offices_ZN_1_FLR_1_LSr, !- Name Offices_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Offices_ZN_1_FLR_1_OSr, !- Name Offices_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Offices_ZN_1_FLR_1_Area, !- Name Offices_ZN_1_FLR_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Offices_ZN_1_FLR_1_LAr, !- Name Offices_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Offices_ZN_1_FLR_1_Light_EMS_Program, !- Name SET Offices_ZN_1_FLR_1_LSr_IP=0.093*Offices_ZN_1_FLR_1_LSr/Offices_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (Offices_ZN_1_FLR_1_OSr <= 0) && (Offices_ZN_1_FLR_1_LSr_IP >= 0.02), IF (ActualOccupancy <= 0), !- Check is to avoid conflict with Add. G SET Offices_ZN_1_FLR_1_LAr = 0.02*Offices_ZN_1_FLR_1_Area/0.09290304, ELSE, SET Offices_ZN_1_FLR_1_LAr = NULL, ENDIF, ELSE, SET Offices_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Offices_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Offices_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Gym_ZN_1_FLR_1_LSr, !- Name Gym_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Gym_ZN_1_FLR_1_OSr, !- Name Gym_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Gym_ZN_1_FLR_1_Area, !- Name Gym_ZN_1_FLR_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Gym_ZN_1_FLR_1_LAr, !- Name Gym_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Gym_ZN_1_FLR_1_Light_EMS_Program, !- Name SET Gym_ZN_1_FLR_1_LSr_IP=0.093*Gym_ZN_1_FLR_1_LSr/Gym_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (Gym_ZN_1_FLR_1_OSr <= 0) && (Gym_ZN_1_FLR_1_LSr_IP >= 0.02), SET Gym_ZN_1_FLR_1_LAr = 0.02*Gym_ZN_1_FLR_1_Area/0.09290304, ELSE, SET Gym_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Gym_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Gym_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Kitchen_ZN_1_FLR_1_LSr, !- Name Kitchen_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Kitchen_ZN_1_FLR_1_OSr, !- Name Kitchen_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Kitchen_ZN_1_FLR_1_Area, !- Name Kitchen_ZN_1_FLR_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Kitchen_ZN_1_FLR_1_LAr, !- Name Kitchen_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Kitchen_ZN_1_FLR_1_Light_EMS_Program, !- Name SET Kitchen_ZN_1_FLR_1_LSr_IP=0.093*Kitchen_ZN_1_FLR_1_LSr/Kitchen_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (Kitchen_ZN_1_FLR_1_OSr <= 0) && (Kitchen_ZN_1_FLR_1_LSr_IP >= 0.02), SET Kitchen_ZN_1_FLR_1_LAr = 0.02*Kitchen_ZN_1_FLR_1_Area/0.09290304, ELSE, SET Kitchen_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Kitchen_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Kitchen_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Cafeteria_ZN_1_FLR_1_LSr,!- Name Cafeteria_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Cafeteria_ZN_1_FLR_1_OSr,!- Name Cafeteria_ZN_1_FLR_1, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Cafeteria_ZN_1_FLR_1_Area, !- Name Cafeteria_ZN_1_FLR_1, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Cafeteria_ZN_1_FLR_1_LAr,!- Name Cafeteria_ZN_1_FLR_1_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Cafeteria_ZN_1_FLR_1_Light_EMS_Program, !- Name SET Cafeteria_ZN_1_FLR_1_LSr_IP=0.093*Cafeteria_ZN_1_FLR_1_LSr/Cafeteria_ZN_1_FLR_1_Area, ! Calculate the actual LPD for each hour IF (Cafeteria_ZN_1_FLR_1_OSr <= 0) && (Cafeteria_ZN_1_FLR_1_LSr_IP >= 0.02), SET Cafeteria_ZN_1_FLR_1_LAr = 0.02*Cafeteria_ZN_1_FLR_1_Area/0.09290304, ELSE, SET Cafeteria_ZN_1_FLR_1_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Cafeteria_ZN_1_FLR_1_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Cafeteria_ZN_1_FLR_1_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, cCL1_Pod_1_ZN_1_FLR_2_LSr, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, cCL1_Pod_1_ZN_1_FLR_2_OSr, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, cCL1_Pod_1_ZN_1_FLR_2_Area, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, cCL1_Pod_1_ZN_1_FLR_2_LAr, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_cCL1_Pod_1_ZN_1_FLR_2_Light_EMS_Program, !- Name SET cCL1_Pod_1_ZN_1_FLR_2_LSr_IP=0.093*cCL1_Pod_1_ZN_1_FLR_2_LSr/cCL1_Pod_1_ZN_1_FLR_2_Area, ! Calculate the actual LPD for each hour IF (cCL1_Pod_1_ZN_1_FLR_2_OSr <= 0) && (cCL1_Pod_1_ZN_1_FLR_2_LSr_IP >= 0.02), SET cCL1_Pod_1_ZN_1_FLR_2_LAr = 0.02*cCL1_Pod_1_ZN_1_FLR_2_Area/0.09290304, ELSE, SET cCL1_Pod_1_ZN_1_FLR_2_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_cCL1_Pod_1_ZN_1_FLR_2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_cCL1_Pod_1_ZN_1_FLR_2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, mCl1_Pod_1_ZN_1_FLR_2_LSr, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, mCl1_Pod_1_ZN_1_FLR_2_OSr, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, mCl1_Pod_1_ZN_1_FLR_2_Area, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, mCl1_Pod_1_ZN_1_FLR_2_LAr, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_mCl1_Pod_1_ZN_1_FLR_2_Light_EMS_Program, !- Name SET mCl1_Pod_1_ZN_1_FLR_2_LSr_IP=0.093*mCl1_Pod_1_ZN_1_FLR_2_LSr/mCl1_Pod_1_ZN_1_FLR_2_Area, ! Calculate the actual LPD for each hour IF (mCl1_Pod_1_ZN_1_FLR_2_OSr <= 0) && (mCl1_Pod_1_ZN_1_FLR_2_LSr_IP >= 0.02), SET mCl1_Pod_1_ZN_1_FLR_2_LAr = 0.02*mCl1_Pod_1_ZN_1_FLR_2_Area/0.09290304, ELSE, SET mCl1_Pod_1_ZN_1_FLR_2_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_mCl1_Pod_1_ZN_1_FLR_2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_mCl1_Pod_1_ZN_1_FLR_2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, cPOD1_ZN_1_FLR_2_LSr, !- Name Corridor_Pod_1_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, cPOD1_ZN_1_FLR_2_OSr, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name and used "Corner_Class_1_Pod_1_ZN_1_FLR_2" Occupancy since this corridor is 0 people People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, cPOD1_ZN_1_FLR_2_Area, !- Name Corridor_Pod_1_ZN_1_FLR_2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, cPOD1_ZN_1_FLR_2_LAr, !- Name Corridor_Pod_1_ZN_1_FLR_2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_cPOD1_ZN_1_FLR_2_Light_EMS_Program, !- Name SET cPOD1_ZN_1_FLR_2_LSr_IP=0.093*cPOD1_ZN_1_FLR_2_LSr/cPOD1_ZN_1_FLR_2_Area, ! Calculate the actual LPD for each hour IF (cPOD1_ZN_1_FLR_2_OSr <= 0) && (cPOD1_ZN_1_FLR_2_LSr_IP >= 0.02), SET cPOD1_ZN_1_FLR_2_LAr = 0.02*cPOD1_ZN_1_FLR_2_Area/0.09290304, ELSE, SET cPOD1_ZN_1_FLR_2_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_cPOD1_ZN_1_FLR_2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_cPOD1_ZN_1_FLR_2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, cCL2_Pod_1_ZN_1_FLR_2_LSr, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, cCL2_Pod_1_ZN_1_FLR_2_OSr, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, cCL2_Pod_1_ZN_1_FLR_2_Area, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, cCL2_Pod_1_ZN_1_FLR_2_LAr, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_cCL2_Pod_1_ZN_1_FLR_2_Light_EMS_Program, !- Name SET cCL2_Pod_1_ZN_1_FLR_2_LSr_IP=0.093*cCL2_Pod_1_ZN_1_FLR_2_LSr/cCL2_Pod_1_ZN_1_FLR_2_Area, ! Calculate the actual LPD for each hour IF (cCL2_Pod_1_ZN_1_FLR_2_OSr <= 0) && (cCL2_Pod_1_ZN_1_FLR_2_LSr_IP >= 0.02), SET cCL2_Pod_1_ZN_1_FLR_2_LAr = 0.02*cCL2_Pod_1_ZN_1_FLR_2_Area/0.09290304, ELSE, SET cCL2_Pod_1_ZN_1_FLR_2_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_cCL2_Pod_1_ZN_1_FLR_2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_cCL2_Pod_1_ZN_1_FLR_2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, mCl2_Pod_1_ZN_1_FLR_2_LSr, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, mCl2_Pod_1_ZN_1_FLR_2_OSr, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, mCl2_Pod_1_ZN_1_FLR_2_Area, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, mCl2_Pod_1_ZN_1_FLR_2_LAr, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_mCl2_Pod_1_ZN_1_FLR_2_Light_EMS_Program, !- Name SET mCl2_Pod_1_ZN_1_FLR_2_LSr_IP=0.093*mCl2_Pod_1_ZN_1_FLR_2_LSr/mCl2_Pod_1_ZN_1_FLR_2_Area, ! Calculate the actual LPD for each hour IF (mCl2_Pod_1_ZN_1_FLR_2_OSr <= 0) && (mCl2_Pod_1_ZN_1_FLR_2_LSr_IP >= 0.02), SET mCl2_Pod_1_ZN_1_FLR_2_LAr = 0.02*mCl2_Pod_1_ZN_1_FLR_2_Area/0.09290304, ELSE, SET mCl2_Pod_1_ZN_1_FLR_2_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_mCl2_Pod_1_ZN_1_FLR_2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_mCl2_Pod_1_ZN_1_FLR_2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, cCL1_Pod_2_ZN_1_FLR_2_LSr, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, cCL1_Pod_2_ZN_1_FLR_2_OSr, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, cCL1_Pod_2_ZN_1_FLR_2_Area, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, cCL1_Pod_2_ZN_1_FLR_2_LAr, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_cCL1_Pod_2_ZN_1_FLR_2_Light_EMS_Program, !- Name SET cCL1_Pod_2_ZN_1_FLR_2_LSr_IP=0.093*cCL1_Pod_2_ZN_1_FLR_2_LSr/cCL1_Pod_2_ZN_1_FLR_2_Area, ! Calculate the actual LPD for each hour IF (cCL1_Pod_2_ZN_1_FLR_2_OSr <= 0) && (cCL1_Pod_2_ZN_1_FLR_2_LSr_IP >= 0.02), SET cCL1_Pod_2_ZN_1_FLR_2_LAr = 0.02*cCL1_Pod_2_ZN_1_FLR_2_Area/0.09290304, ELSE, SET cCL1_Pod_2_ZN_1_FLR_2_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_cCL1_Pod_2_ZN_1_FLR_2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_cCL1_Pod_2_ZN_1_FLR_2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, mCl1_Pod_2_ZN_1_FLR_2_LSr, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, mCl1_Pod_2_ZN_1_FLR_2_OSr, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, mCl1_Pod_2_ZN_1_FLR_2_Area, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, mCl1_Pod_2_ZN_1_FLR_2_LAr, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_mCl1_Pod_2_ZN_1_FLR_2_Light_EMS_Program, !- Name SET mCl1_Pod_2_ZN_1_FLR_2_LSr_IP=0.093*mCl1_Pod_2_ZN_1_FLR_2_LSr/mCl1_Pod_2_ZN_1_FLR_2_Area, ! Calculate the actual LPD for each hour IF (mCl1_Pod_2_ZN_1_FLR_2_OSr <= 0) && (mCl1_Pod_2_ZN_1_FLR_2_LSr_IP >= 0.02), SET mCl1_Pod_2_ZN_1_FLR_2_LAr = 0.02*mCl1_Pod_2_ZN_1_FLR_2_Area/0.09290304, ELSE, SET mCl1_Pod_2_ZN_1_FLR_2_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_mCl1_Pod_2_ZN_1_FLR_2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_mCl1_Pod_2_ZN_1_FLR_2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, cPOD2_ZN_1_FLR_2_LSr, !- Name Corridor_Pod_2_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, cPOD2_ZN_1_FLR_2_OSr, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name and used "Corner_Class_1_Pod_1_ZN_1_FLR_2" Occupancy since this corridor is 0 people People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, cPOD2_ZN_1_FLR_2_Area, !- Name Corridor_Pod_2_ZN_1_FLR_2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, cPOD2_ZN_1_FLR_2_LAr, !- Name Corridor_Pod_2_ZN_1_FLR_2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_cPOD2_ZN_1_FLR_2_Light_EMS_Program, !- Name SET cPOD2_ZN_1_FLR_2_LSr_IP=0.093*cPOD2_ZN_1_FLR_2_LSr/cPOD2_ZN_1_FLR_2_Area, ! Calculate the actual LPD for each hour IF (cPOD2_ZN_1_FLR_2_OSr <= 0) && (cPOD2_ZN_1_FLR_2_LSr_IP >= 0.02), SET cPOD2_ZN_1_FLR_2_LAr = 0.02*cPOD2_ZN_1_FLR_2_Area/0.09290304, ELSE, SET cPOD2_ZN_1_FLR_2_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_cPOD2_ZN_1_FLR_2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_cPOD2_ZN_1_FLR_2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, cCL2_Pod_2_ZN_1_FLR_2_LSr, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, cCL2_Pod_2_ZN_1_FLR_2_OSr, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, cCL2_Pod_2_ZN_1_FLR_2_Area, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, cCL2_Pod_2_ZN_1_FLR_2_LAr, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_cCL2_Pod_2_ZN_1_FLR_2_Light_EMS_Program, !- Name SET cCL2_Pod_2_ZN_1_FLR_2_LSr_IP=0.093*cCL2_Pod_2_ZN_1_FLR_2_LSr/cCL2_Pod_2_ZN_1_FLR_2_Area, ! Calculate the actual LPD for each hour IF (cCL2_Pod_2_ZN_1_FLR_2_OSr <= 0) && (cCL2_Pod_2_ZN_1_FLR_2_LSr_IP >= 0.02), SET cCL2_Pod_2_ZN_1_FLR_2_LAr = 0.02*cCL2_Pod_2_ZN_1_FLR_2_Area/0.09290304, ELSE, SET cCL2_Pod_2_ZN_1_FLR_2_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_cCL2_Pod_2_ZN_1_FLR_2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_cCL2_Pod_2_ZN_1_FLR_2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, mCl2_Pod_2_ZN_1_FLR_2_LSr, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, mCl2_Pod_2_ZN_1_FLR_2_OSr, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, mCl2_Pod_2_ZN_1_FLR_2_Area, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, mCl2_Pod_2_ZN_1_FLR_2_LAr, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_mCl2_Pod_2_ZN_1_FLR_2_Light_EMS_Program, !- Name SET mCl2_Pod_2_ZN_1_FLR_2_LSr_IP=0.093*mCl2_Pod_2_ZN_1_FLR_2_LSr/mCl2_Pod_2_ZN_1_FLR_2_Area, ! Calculate the actual LPD for each hour IF (mCl2_Pod_2_ZN_1_FLR_2_OSr <= 0) && (mCl2_Pod_2_ZN_1_FLR_2_LSr_IP >= 0.02), SET mCl2_Pod_2_ZN_1_FLR_2_LAr = 0.02*mCl2_Pod_2_ZN_1_FLR_2_Area/0.09290304, ELSE, SET mCl2_Pod_2_ZN_1_FLR_2_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_mCl2_Pod_2_ZN_1_FLR_2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_mCl2_Pod_2_ZN_1_FLR_2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, cCL1_Pod_3_ZN_1_FLR_2_LSr, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, cCL1_Pod_3_ZN_1_FLR_2_OSr, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, cCL1_Pod_3_ZN_1_FLR_2_Area, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, cCL1_Pod_3_ZN_1_FLR_2_LAr, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_cCL1_Pod_3_ZN_1_FLR_2_Light_EMS_Program, !- Name SET cCL1_Pod_3_ZN_1_FLR_2_LSr_IP=0.093*cCL1_Pod_3_ZN_1_FLR_2_LSr/cCL1_Pod_3_ZN_1_FLR_2_Area, ! Calculate the actual LPD for each hour IF (cCL1_Pod_3_ZN_1_FLR_2_OSr <= 0) && (cCL1_Pod_3_ZN_1_FLR_2_LSr_IP >= 0.02), SET cCL1_Pod_3_ZN_1_FLR_2_LAr = 0.02*cCL1_Pod_3_ZN_1_FLR_2_Area/0.09290304, ELSE, SET cCL1_Pod_3_ZN_1_FLR_2_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_cCL1_Pod_3_ZN_1_FLR_2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_cCL1_Pod_3_ZN_1_FLR_2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, mCl1_Pod_3_ZN_1_FLR_2_LSr, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, mCl1_Pod_3_ZN_1_FLR_2_OSr, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, mCl1_Pod_3_ZN_1_FLR_2_Area, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, mCl1_Pod_3_ZN_1_FLR_2_LAr, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_mCl1_Pod_3_ZN_1_FLR_2_Light_EMS_Program, !- Name SET mCl1_Pod_3_ZN_1_FLR_2_LSr_IP=0.093*mCl1_Pod_3_ZN_1_FLR_2_LSr/mCl1_Pod_3_ZN_1_FLR_2_Area, ! Calculate the actual LPD for each hour IF (mCl1_Pod_3_ZN_1_FLR_2_OSr <= 0) && (mCl1_Pod_3_ZN_1_FLR_2_LSr_IP >= 0.02), SET mCl1_Pod_3_ZN_1_FLR_2_LAr = 0.02*mCl1_Pod_3_ZN_1_FLR_2_Area/0.09290304, ELSE, SET mCl1_Pod_3_ZN_1_FLR_2_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_mCl1_Pod_3_ZN_1_FLR_2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_mCl1_Pod_3_ZN_1_FLR_2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, cPOD3_ZN_1_FLR_2_LSr, !- Name Corridor_Pod_3_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, cPOD3_ZN_1_FLR_2_OSr, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name and used "Corner_Class_1_Pod_1_ZN_1_FLR_2" Occupancy since this corridor is 0 people People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, cPOD3_ZN_1_FLR_2_Area, !- Name Corridor_Pod_3_ZN_1_FLR_2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, cPOD3_ZN_1_FLR_2_LAr, !- Name Corridor_Pod_3_ZN_1_FLR_2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_cPOD3_ZN_1_FLR_2_Light_EMS_Program, !- Name SET cPOD3_ZN_1_FLR_2_LSr_IP=0.093*cPOD3_ZN_1_FLR_2_LSr/cPOD3_ZN_1_FLR_2_Area, ! Calculate the actual LPD for each hour IF (cPOD3_ZN_1_FLR_2_OSr <= 0) && (cPOD3_ZN_1_FLR_2_LSr_IP >= 0.02), SET cPOD3_ZN_1_FLR_2_LAr = 0.02*cPOD3_ZN_1_FLR_2_Area/0.09290304, ELSE, SET cPOD3_ZN_1_FLR_2_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_cPOD3_ZN_1_FLR_2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_cPOD3_ZN_1_FLR_2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, cCL2_Pod_3_ZN_1_FLR_2_LSr, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, cCL2_Pod_3_ZN_1_FLR_2_OSr, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, cCL2_Pod_3_ZN_1_FLR_2_Area, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, cCL2_Pod_3_ZN_1_FLR_2_LAr, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_cCL2_Pod_3_ZN_1_FLR_2_Light_EMS_Program, !- Name SET cCL2_Pod_3_ZN_1_FLR_2_LSr_IP=0.093*cCL2_Pod_3_ZN_1_FLR_2_LSr/cCL2_Pod_3_ZN_1_FLR_2_Area, ! Calculate the actual LPD for each hour IF (cCL2_Pod_3_ZN_1_FLR_2_OSr <= 0) && (cCL2_Pod_3_ZN_1_FLR_2_LSr_IP >= 0.02), SET cCL2_Pod_3_ZN_1_FLR_2_LAr = 0.02*cCL2_Pod_3_ZN_1_FLR_2_Area/0.09290304, ELSE, SET cCL2_Pod_3_ZN_1_FLR_2_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_cCL2_Pod_3_ZN_1_FLR_2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_cCL2_Pod_3_ZN_1_FLR_2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, mCl2_Pod_3_ZN_1_FLR_2_LSr, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, mCl2_Pod_3_ZN_1_FLR_2_OSr, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, mCl2_Pod_3_ZN_1_FLR_2_Area, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, mCl2_Pod_3_ZN_1_FLR_2_LAr, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_mCl2_Pod_3_ZN_1_FLR_2_Light_EMS_Program, !- Name SET mCl2_Pod_3_ZN_1_FLR_2_LSr_IP=0.093*mCl2_Pod_3_ZN_1_FLR_2_LSr/mCl2_Pod_3_ZN_1_FLR_2_Area, ! Calculate the actual LPD for each hour IF (mCl2_Pod_3_ZN_1_FLR_2_OSr <= 0) && (mCl2_Pod_3_ZN_1_FLR_2_LSr_IP >= 0.02), SET mCl2_Pod_3_ZN_1_FLR_2_LAr = 0.02*mCl2_Pod_3_ZN_1_FLR_2_Area/0.09290304, ELSE, SET mCl2_Pod_3_ZN_1_FLR_2_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_mCl2_Pod_3_ZN_1_FLR_2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_mCl2_Pod_3_ZN_1_FLR_2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Main_Corridor_ZN_1_FLR_2_LSr, !- Name Main_Corridor_ZN_1_FLR_2,!- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Main_Corridor_ZN_1_FLR_2_OSr, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name and used "Corner_Class_1_Pod_1_ZN_1_FLR_2" Occupancy since this lobby is 0 people People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Main_Corridor_ZN_1_FLR_2_Area, !- Name Main_Corridor_ZN_1_FLR_2,!- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Main_Corridor_ZN_1_FLR_2_LAr, !- Name Main_Corridor_ZN_1_FLR_2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Main_Corridor_ZN_1_FLR_2_Light_EMS_Program, !- Name SET Main_Corridor_ZN_1_FLR_2_LSr_IP=0.093*Main_Corridor_ZN_1_FLR_2_LSr/Main_Corridor_ZN_1_FLR_2_Area, ! Calculate the actual LPD for each hour IF (Main_Corridor_ZN_1_FLR_2_OSr <= 0) && (Main_Corridor_ZN_1_FLR_2_LSr_IP >= 0.02), SET Main_Corridor_ZN_1_FLR_2_LAr = 0.02*Main_Corridor_ZN_1_FLR_2_Area/0.09290304, ELSE, SET Main_Corridor_ZN_1_FLR_2_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Main_Corridor_ZN_1_FLR_2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Main_Corridor_ZN_1_FLR_2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Lobby_ZN_1_FLR_2_LSr, !- Name Lobby_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Lobby_ZN_1_FLR_2_OSr, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name and used "Corner_Class_1_Pod_1_ZN_1_FLR_2" Occupancy since this lobby is 0 people People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Lobby_ZN_1_FLR_2_Area, !- Name Lobby_ZN_1_FLR_2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Lobby_ZN_1_FLR_2_LAr, !- Name Lobby_ZN_1_FLR_2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Lobby_ZN_1_FLR_2_Light_EMS_Program, !- Name SET Lobby_ZN_1_FLR_2_LSr_IP=0.093*Lobby_ZN_1_FLR_2_LSr/Lobby_ZN_1_FLR_2_Area, ! Calculate the actual LPD for each hour IF (Lobby_ZN_1_FLR_2_OSr <= 0) && (Lobby_ZN_1_FLR_2_LSr_IP >= 0.02), SET Lobby_ZN_1_FLR_2_LAr = 0.02*Lobby_ZN_1_FLR_2_Area/0.09290304, ELSE, SET Lobby_ZN_1_FLR_2_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Lobby_ZN_1_FLR_2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Lobby_ZN_1_FLR_2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Mech_ZN_1_FLR_2_LSr, !- Name Mech_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Mech_ZN_1_FLR_2_OSr, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name and used "Corner_Class_1_Pod_1_ZN_1_FLR_2" Occupancy since this Mechnical zone is 0 people People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Mech_ZN_1_FLR_2_Area, !- Name Mech_ZN_1_FLR_2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Mech_ZN_1_FLR_2_LAr, !- Name Mech_ZN_1_FLR_2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Mech_ZN_1_FLR_2_Light_EMS_Program, !- Name SET Mech_ZN_1_FLR_2_LSr_IP=0.093*Mech_ZN_1_FLR_2_LSr/Mech_ZN_1_FLR_2_Area, ! Calculate the actual LPD for each hour IF (Mech_ZN_1_FLR_2_OSr <= 0) && (Mech_ZN_1_FLR_2_LSr_IP >= 0.02), SET Mech_ZN_1_FLR_2_LAr = 0.02*Mech_ZN_1_FLR_2_Area/0.09290304, ELSE, SET Mech_ZN_1_FLR_2_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Mech_ZN_1_FLR_2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Mech_ZN_1_FLR_2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, BATHROOMS_ZN_1_FLR_2_LSr,!- Name BATHROOMS_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, BATHROOMS_ZN_1_FLR_2_OSr,!- Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name and used "Corner_Class_1_Pod_1_ZN_1_FLR_2" Occupancy since this Bath zone is 0 people People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, BATHROOMS_ZN_1_FLR_2_Area, !- Name BATHROOMS_ZN_1_FLR_2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, BATHROOMS_ZN_1_FLR_2_LAr,!- Name BATHROOMS_ZN_1_FLR_2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_BATHROOMS_ZN_1_FLR_2_Light_EMS_Program, !- Name SET BATHROOMS_ZN_1_FLR_2_LSr_IP=0.093*BATHROOMS_ZN_1_FLR_2_LSr/BATHROOMS_ZN_1_FLR_2_Area, ! Calculate the actual LPD for each hour IF (BATHROOMS_ZN_1_FLR_2_OSr <= 0) && (BATHROOMS_ZN_1_FLR_2_LSr_IP >= 0.02), SET BATHROOMS_ZN_1_FLR_2_LAr = 0.02*BATHROOMS_ZN_1_FLR_2_Area/0.09290304, ELSE, SET BATHROOMS_ZN_1_FLR_2_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_BATHROOMS_ZN_1_FLR_2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_BATHROOMS_ZN_1_FLR_2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, Offices_ZN_1_FLR_2_LSr, !- Name Offices_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, Offices_ZN_1_FLR_2_OSr, !- Name Offices_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, Offices_ZN_1_FLR_2_Area, !- Name Offices_ZN_1_FLR_2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, Offices_ZN_1_FLR_2_LAr, !- Name Offices_ZN_1_FLR_2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_Offices_ZN_1_FLR_2_Light_EMS_Program, !- Name SET Offices_ZN_1_FLR_2_LSr_IP=0.093*Offices_ZN_1_FLR_2_LSr/Offices_ZN_1_FLR_2_Area, ! Calculate the actual LPD for each hour IF (Offices_ZN_1_FLR_2_OSr <= 0) && (Offices_ZN_1_FLR_2_LSr_IP >= 0.02), IF (ActualOccupancy <= 0), !- Check is to avoid conflict with Add. G SET Offices_ZN_1_FLR_2_LAr = 0.02*Offices_ZN_1_FLR_2_Area/0.09290304, ELSE, SET Offices_ZN_1_FLR_2_LAr = NULL, ENDIF, ELSE, SET Offices_ZN_1_FLR_2_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_Offices_ZN_1_FLR_2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_Offices_ZN_1_FLR_2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, LMC_ZN_1_FLR_2_LSr, !- Name Library_Media_Center_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name Zone Lights Electric Power; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, LMC_ZN_1_FLR_2_OSr, !- Name Library_Media_Center_ZN_1_FLR_2, !- Output:Variable or Output:Meter Index Key Name People Occupant Count; !- Output:Variable or Output:Meter Name EnergyManagementSystem:InternalVariable, LMC_ZN_1_FLR_2_Area, !- Name Library_Media_Center_ZN_1_FLR_2, !- Internal Data Index Key Name Zone Floor Area; !- Internal Data Type EnergyManagementSystem:Actuator, LMC_ZN_1_FLR_2_LAr, !- Name Library_Media_Center_ZN_1_FLR_2_lights, !- Actuated Component Unique Name Lights, !- Actuated Component Type Electric Power Level; !- Actuated Component Control Type EnergyManagementSystem:Program, SET_LMC_ZN_1_FLR_2_Light_EMS_Program, !- Name SET LMC_ZN_1_FLR_2_LSr_IP=0.093*LMC_ZN_1_FLR_2_LSr/LMC_ZN_1_FLR_2_Area, ! Calculate the actual LPD for each hour IF (LMC_ZN_1_FLR_2_OSr <= 0) && (LMC_ZN_1_FLR_2_LSr_IP >= 0.02), SET LMC_ZN_1_FLR_2_LAr = 0.02*LMC_ZN_1_FLR_2_Area/0.09290304, ELSE, SET LMC_ZN_1_FLR_2_LAr = NULL, ENDIF; EnergyManagementSystem:ProgramCallingManager, SET_LMC_ZN_1_FLR_2_Light_EMS_Program_Prog_Manager, !- Name BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point SET_LMC_ZN_1_FLR_2_Light_EMS_Program; !- Program Name 1 EnergyManagementSystem:Sensor, VAV_POD_1_OA_VRP, !- Name VAV_POD_1, !- Output:Variable or Output:Meter Index Key Name Air System Outdoor Air Mechanical Ventilation Requested Mass Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, VAV_POD_1_OA, !- Name VAV_POD_1, !- Output:Variable or Output:Meter Index Key Name Air System Outdoor Air Mass Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, VAV_POD_1_SUPPLY_FLOW, !- Name VAV_POD_1_OA-VAV_POD_1_CoolCNode, !- Output:Variable or Output:Meter Index Key Name System Node Standard Density Volume Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Actuator, VAV_POD_1_MAX_OA_FRAC, !- Name VAV_POD_1 Max OA Fraction, !- Actuated Component Unique Name Schedule:Constant, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:ProgramCallingManager, VAV_POD_1_MAX_OA_FRAC_Prog_Manager,!- Name AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point VAV_POD_1_MAX_OA_FRAC; !- Program Name 1 EnergyManagementSystem:Program, VAV_POD_1_MAX_OA_FRAC, !- Name IF VAV_POD_1_OA > VAV_POD_1_OA_VRP, !- Program Line 1 SET VAV_POD_1_MAX_OA_FRAC = NULL, !- Program Line 2 ELSE, !- A4 IF VAV_POD_1_SUPPLY_FLOW > 0, !- A5 SET VAV_POD_1_MAX_OA_FRAC = 7.5943 / VAV_POD_1_SUPPLY_FLOW,!- A6 ELSE, !- A7 SET VAV_POD_1_MAX_OA_FRAC = NULL, !- A8 ENDIF, !- A9 ENDIF; !- A10 EnergyManagementSystem:Sensor, VAV_POD_2_OA_VRP, !- Name VAV_POD_2, !- Output:Variable or Output:Meter Index Key Name Air System Outdoor Air Mechanical Ventilation Requested Mass Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, VAV_POD_2_OA, !- Name VAV_POD_2, !- Output:Variable or Output:Meter Index Key Name Air System Outdoor Air Mass Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, VAV_POD_2_SUPPLY_FLOW, !- Name VAV_POD_2_OA-VAV_POD_2_CoolCNode, !- Output:Variable or Output:Meter Index Key Name System Node Standard Density Volume Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Actuator, VAV_POD_2_MAX_OA_FRAC, !- Name VAV_POD_2 Max OA Fraction, !- Actuated Component Unique Name Schedule:Constant, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:ProgramCallingManager, VAV_POD_2_MAX_OA_FRAC_Prog_Manager,!- Name AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point VAV_POD_2_MAX_OA_FRAC; !- Program Name 1 EnergyManagementSystem:Program, VAV_POD_2_MAX_OA_FRAC, !- Name IF VAV_POD_2_OA > VAV_POD_2_OA_VRP, !- Program Line 1 SET VAV_POD_2_MAX_OA_FRAC = NULL, !- Program Line 2 ELSE, !- A4 IF VAV_POD_2_SUPPLY_FLOW > 0, !- A5 SET VAV_POD_2_MAX_OA_FRAC = 7.5943 / VAV_POD_2_SUPPLY_FLOW,!- A6 ELSE, !- A7 SET VAV_POD_2_MAX_OA_FRAC = NULL, !- A8 ENDIF, !- A9 ENDIF; !- A10 EnergyManagementSystem:Sensor, VAV_POD_3_OA_VRP, !- Name VAV_POD_3, !- Output:Variable or Output:Meter Index Key Name Air System Outdoor Air Mechanical Ventilation Requested Mass Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, VAV_POD_3_OA, !- Name VAV_POD_3, !- Output:Variable or Output:Meter Index Key Name Air System Outdoor Air Mass Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, VAV_POD_3_SUPPLY_FLOW, !- Name VAV_POD_3_OA-VAV_POD_3_CoolCNode, !- Output:Variable or Output:Meter Index Key Name System Node Standard Density Volume Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Actuator, VAV_POD_3_MAX_OA_FRAC, !- Name VAV_POD_3 Max OA Fraction, !- Actuated Component Unique Name Schedule:Constant, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:ProgramCallingManager, VAV_POD_3_MAX_OA_FRAC_Prog_Manager,!- Name AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point VAV_POD_3_MAX_OA_FRAC; !- Program Name 1 EnergyManagementSystem:Program, VAV_POD_3_MAX_OA_FRAC, !- Name IF VAV_POD_3_OA > VAV_POD_3_OA_VRP, !- Program Line 1 SET VAV_POD_3_MAX_OA_FRAC = NULL, !- Program Line 2 ELSE, !- A4 IF VAV_POD_3_SUPPLY_FLOW > 0, !- A5 SET VAV_POD_3_MAX_OA_FRAC = 7.5943 / VAV_POD_3_SUPPLY_FLOW,!- A6 ELSE, !- A7 SET VAV_POD_3_MAX_OA_FRAC = NULL, !- A8 ENDIF, !- A9 ENDIF; !- A10 EnergyManagementSystem:Sensor, VAV_OTHER_OA_VRP, !- Name VAV_OTHER, !- Output:Variable or Output:Meter Index Key Name Air System Outdoor Air Mechanical Ventilation Requested Mass Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, VAV_OTHER_OA, !- Name VAV_OTHER, !- Output:Variable or Output:Meter Index Key Name Air System Outdoor Air Mass Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Sensor, VAV_OTHER_SUPPLY_FLOW, !- Name VAV_OTHER_OA-VAV_OTHER_CoolCNode, !- Output:Variable or Output:Meter Index Key Name System Node Standard Density Volume Flow Rate; !- Output:Variable or Output:Meter Name EnergyManagementSystem:Actuator, VAV_OTHER_MAX_OA_FRAC, !- Name VAV_OTHER Max OA Fraction, !- Actuated Component Unique Name Schedule:Constant, !- Actuated Component Type Schedule Value; !- Actuated Component Control Type EnergyManagementSystem:ProgramCallingManager, VAV_OTHER_MAX_OA_FRAC_Prog_Manager,!- Name AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point VAV_OTHER_MAX_OA_FRAC; !- Program Name 1 EnergyManagementSystem:Program, VAV_OTHER_MAX_OA_FRAC, !- Name IF VAV_OTHER_OA > VAV_OTHER_OA_VRP, !- Program Line 1 SET VAV_OTHER_MAX_OA_FRAC = NULL, !- Program Line 2 ELSE, !- A4 IF VAV_OTHER_SUPPLY_FLOW > 0, !- A5 SET VAV_OTHER_MAX_OA_FRAC = / VAV_OTHER_SUPPLY_FLOW,!- A6 ELSE, !- A7 SET VAV_OTHER_MAX_OA_FRAC = NULL, !- A8 ENDIF, !- A9 ENDIF; !- A10