15787 lines
735 KiB
Plaintext
15787 lines
735 KiB
Plaintext
|
|
!The DOE Prototype Building Models were developed by Pacific Northwest National Laboratory (PNNL), under contract with the U.S.
|
|
!Department of Energy (DOE). These building models were derived from DOE's Commercial Reference Building Models with modifications
|
|
!based on input from the ASHRAE Standard 90.1 committee, the Advanced Energy Design Guide series, and building industry experts. The
|
|
!prototypes models were developed to quantify energy saving impacts from newly published editions of ASHRAE Standard 90.1, 189.1, IECC,
|
|
!and other energy codes and standards. The basic building descriptions can be found in the Scorecards posted at www.energycodes.gov
|
|
!website. The recommended citation of the prototype models is
|
|
!
|
|
!DOE and PNNL. 2020. Commercial Prototype Building Models, Richland, WA, Pacific Northwest National Laboratory. Available at https://www.energycodes.gov/development/commercial/prototype_models.
|
|
!
|
|
!Detailed descriptions of the prototype model development and addenda modeling strategies can be found in the following reports:
|
|
!DOE, 2020. Preliminary Energy Savings Analysis: ANSI/ASHRAE/IES Standard 90.1-2019. Report prepared by Zhang, J., M. Rosenberg, J.
|
|
!Lerond, Y. Xie, Nambia, C., Y. Chen, R. Hart, M. Halverson, D. Maddox, and S. Goel, Richland, WA, Pacific Northwest National Laboratory.
|
|
!
|
|
!Zhang, J., Y. Chen, Y. Xie, M. Rosenberg, R. Hart. Energy and Energy Cost Savings Analysis of the 2018 IECC for Commercial Buildings.
|
|
!2018. PNNL-28125. Richland, WA: Pacific Northwest National Laboratory.
|
|
!
|
|
!DOE. 2017. Energy Savings Analysis: ANSI/ASHRAE/IES Standard 90.1-2016. Prepared by Athalye, R.A, M.A. Halverson, M.I. Rosenberg, B. Liu,
|
|
!J. Zhang, R. Hart, V.V. Mendon, S. Goel, Y. Chen, Y. Xie, and M. Zhao, Richland, WA, Pacific Northwest National Laboratory. https://www.energycodes.gov/sites/default/files/documents/02202018_Standard_90.1-2016_Determination_TSD.pdf.
|
|
!
|
|
!Zhang, J., Y. Xie, R.A. Athalye, J. Zhuge, M. Rosenberg, R. Hart, and B. Liu. Energy and Energy Cost Savings Analysis of the 2015 IECC
|
|
!for Commercial Buildings. 2015. PNNL-24269 Rev. 1. Richland, WA: Pacific Northwest National
|
|
!Laboratory. https://www.energycodes.gov/sites/default/files/documents/2015_IECC_Commercial_Analysis.pdf.
|
|
!
|
|
!Halverson M.A., M.I. Rosenberg, W. Wang, J. Zhang, V.V. Mendon, R.A. Athalye, Y. Xie, R. Hart, S. Goel, 2014. ANSI/ASHRAE/IES Standard
|
|
!90.1-2013 Determination of Energy Savings: Quantitative Analysis, PNNL-23479. Richland, WA: Pacific Northwest National Laboratory. https://www.energycodes.gov/sites/default/files/documents/901-2013_finalCommercialDeterminationQuantitativeAnalysis_TSD_0.pdf.
|
|
!
|
|
!Goel S., R.A. Athalye, W. Wang, J. Zhang, M.I. Rosenberg, Y. Xie, and R. Hart, et al. 2014. Enhancements to ASHRAE Standard 90.1
|
|
!Prototype Building Models. PNNL-23269. Richland, WA: Pacific Northwest National Laboratory. https://www.pnnl.gov/main/publications/external/technical_reports/PNNL-23269.pdf.
|
|
!
|
|
!Zhang J., R.A. Athalye, R. Hart, M.I. Rosenberg, Y. Xie, S. Goel, and V.V. Mendon, et al. 2013. Energy and Energy Cost Savings Analysis
|
|
!of the IECC for Commercial Buildings. PNNL-22760. Richland, WA: Pacific Northwest National Laboratory. http://www.pnnl.gov/main/publications/external/technical_reports/PNNL-22760.pdf.
|
|
!
|
|
!Thornton B.A., M.I. Rosenberg, E.E. Richman, W. Wang, Y. Xie, J. Zhang, H. Cho, VV Mendon, R.A. Athalye, and B. Liu. 2011. Achieving
|
|
!the 30% Goal: Energy and Cost Savings Analysis of ASHRAE Standard 90.1-2010. PNNL-20405. Richland, WA: Pacific Northwest National
|
|
!Laboratory. https://www.energycodes.gov/sites/default/files/documents/BECP_Energy_Cost_Savings_STD2010_May2011_v00.pdf.
|
|
!
|
|
!
|
|
! WeatherFile: USA_MN_Rochester.Intl.AP.726440_TMY3.epw
|
|
|
|
|
|
|
|
! GPARM parameters as input:
|
|
! Case = ASHRAE901_HotelLarge_STD2019_Rochester
|
|
! SelectedCase =
|
|
! basement_tempt = Zone6A_nonres_R10_HotelLarge_Rochester_STD2016_out.idf
|
|
! avg_oa_tempt_ip = 43.475
|
|
! maxdiff_oa_tempt_ip = 60.3
|
|
! annual_run = no
|
|
! ext_wall_type = MassWall
|
|
! nonres_ext_wall_ufactor = 0.45426104
|
|
! res_ext_wall_ufactor = 0.403156673
|
|
! roof_type = LightweightRoof
|
|
! nonres_roof_ufactor = 0.181704416
|
|
! roof_emissivity = 0.9
|
|
! roof_solar_absorp = 0.77
|
|
! floor_type = LightweightFloor
|
|
! nonres_floor_ufactor = 0.181704416
|
|
! nonres_window =
|
|
! res_window =
|
|
! sidelighting_control = yes_AY
|
|
! LPD_basement = 6.888902667
|
|
! LPD_retail = 9.04168475
|
|
! LPD_mechanic = 10.2257149
|
|
! LPD_storage = 4.090285958
|
|
! LPD_laundry = 5.704872521
|
|
! LPD_dining = 6.45834625
|
|
! LPD_lobby = 5.489594313
|
|
! LPD_guestroom = 4.413203271
|
|
! LPD_corridor_flr3 = 4.413203271
|
|
! LPD_corridor_flr6 = 4.413203271
|
|
! LPD_kitchen = 11.73266235
|
|
! guestroom_ltg_sch = Guestroom_Ltg_Sch_Base
|
|
! guestroom_eqp_sch = Guestroom_Eqp_Sch_Adva
|
|
! exterior_lights_watts = 11632.5
|
|
! economizer = DifferentialDryBulb
|
|
! skip_economizer_control = Yes
|
|
! VAV_WITH_REHEAT_DCV = No
|
|
! cafe_OA_per_area = 0.000914047
|
|
! cafe_OA_per_person = 0.00354
|
|
! lobby_OA_per_area = 0.000304682
|
|
! lobby_OA_per_person = 0.00354
|
|
! banquet_OA_per_area = 0.000914047
|
|
! banquet_OA_per_person = 0.00354
|
|
! dining_OA_per_area = 0.000914047
|
|
! dining_OA_per_person = 0.00354
|
|
! damper_sche = MinOA_MotorizedDamper_Sched
|
|
! avg_oa_tempt = 6.375
|
|
! maxdiff_oa_tempt = 33.5
|
|
! infil = 0.00056896
|
|
! OA_Basement = 0.000431633
|
|
! OA_Retail_1 = 0.001180644
|
|
! OA_Retail_2 = 0.001180644
|
|
! OA_Mechanical = 0
|
|
! OA_Storage = 0.000609365
|
|
! OA_Laundry = 0
|
|
! OA_Cafe = 0.003580019
|
|
! OA_Lobby = 0.001447242
|
|
! OA_Room_L = 0.000395372
|
|
! OA_Room_S = 0.000448954
|
|
! OA_Corridor_M = 0.000304682
|
|
! OA_Banquet = 0.003580019
|
|
! OA_Dining = 0.003580019
|
|
! OA_Kitchen = 0.003554628
|
|
! OA_Corridor_T = 0.000304682
|
|
! chilledwater_pump_head = 44761.27683
|
|
! chilledwater_pump_secondary_head = 134283.8305
|
|
! SAT_reset_switch = Yes
|
|
! SAT_reset_T = 15.6
|
|
! economizer_lockout = LockoutWithHeating
|
|
! eco_max_temp_limit = na
|
|
! heating_damper_act = ReverseWithLimits
|
|
! add_ck_vav_with_reheat = Yes
|
|
! banquet_flr_6_mdp = 0.88
|
|
! basement_mdp = 0.32
|
|
! cafe_flr_1_mdp = 0.9
|
|
! corridor_flr_3_mdp = 0.2
|
|
! corridor_flr_6_mdp = 0.2
|
|
! dining_flr_6_mdp = 0.86
|
|
! kitchen_flr_6_mdp = 0.2
|
|
! laundry_flr_1_mdp = 0.2
|
|
! lobby_flr_1_mdp = 0.64
|
|
! mech_flr_1_mdp = 0.2
|
|
! retail_1_flr_1_mdp = 0.2
|
|
! retail_2_flr_1_mdp = 0.5
|
|
! storage_flr_1_mdp = 0.6
|
|
! vav_with_reheat_oaf = autosize
|
|
! Transfer_Air = all_exhaust
|
|
! BLDG_ELEVATORS_LIGHTS_FAN_SCH = ELEV_LIGHT_FAN_SCH_ADD_DF
|
|
! BLDG_ELEVATORS_LIGHTS_FAN_POWER = 375.9
|
|
! bsmt_new = National_HotelLarge_ASHRAE901_STD2016_Zone6A_nonres_MN-Rochester-MN_out.idf
|
|
! osc_key_wall = surfPropOthSdCoefBasementAvgWall
|
|
! osc_key_floor = surfPropOthSdCoefBasementAvgFloor
|
|
! BLDG_EQUIP_SCH = BLDG_EQUIP_SCH_ADV
|
|
! PumpCurve_flag = pump_ride_on_curve
|
|
! VAV_WITH_REHEAT_ERV = Yes
|
|
! FLR_3_DOAS_ERV = Yes
|
|
! FLR_6_DOAS_ERV = Yes
|
|
! VAV_WITH_REHEAT_ERV_power = 6741.118
|
|
! FLR_3_DOAS_ERV_power = 1510.213811
|
|
! FLR_6_DOAS_ERV_power = 61.989425
|
|
! pv_generator = no
|
|
! pv_surface_area = 0
|
|
! STD189_overhang = no
|
|
! swh_et = 0.802764687
|
|
! swh_ua = 15.60100579
|
|
! ext_lgt_sch = Exterior_Lgt_ALWAYS_ON
|
|
! LTG_SCH_SET = LTG_SET_STD2013
|
|
! transformer_size = 150000
|
|
! transformer_eff = 0.988
|
|
! freezer_power = 277.5
|
|
! refrigerator_power = 156.7
|
|
! swh_et_booster = 1
|
|
! swh_ua_booster = 1.053159296
|
|
! swh_et_laundry = 0.803988738
|
|
! swh_ua_laundry = 11.25413987
|
|
! pipe_heat_loss = 15908.9
|
|
! evap_fan_power_case1 = 9.714285714
|
|
! evap_fan_power_case2 = 15.71428571
|
|
! walkin_lighting_sch = walkin_occ_lght_sch
|
|
! fan_total_eff = 0.385
|
|
! fan_motor_eff = 0.7
|
|
! kitchen_exh_fan_power = 609
|
|
! skip_EMSprogram = yes
|
|
! BoilerAM = Yes
|
|
! Wfile_TMY3 = USA_MN_Rochester.Intl.AP.726440_TMY3.epw
|
|
! loadProfile = No
|
|
! OA_DOAS = 2.051199045
|
|
! OA_DOAS_RoomL = 0.015433284
|
|
! OA_DOAS_RoomS = 0.011012535
|
|
! Door_Switch_Enabled_Thermostat_Reset = TRUE
|
|
! receptacle_ctrl_occ_reduction_frac = 0.952414364
|
|
! receptacle_ctrl_unocc_reduction_frac = 0.765167925
|
|
! CHW_ST_Reset = No
|
|
! HOTW_ST_Reset = No
|
|
! CodeName = ASHRAE90.1_STD2019
|
|
! CZ_City_Old = Burlington
|
|
! CZ_Label = 6A
|
|
! occ_based_vent_sch = Occ_Guestroom_Vent_Ctrl_20min
|
|
! vac_vent_sch = VAC_GUESTROOM_VENTILATION_SCHEDULE
|
|
! vac_guestroom_htg_stpt = 15.556
|
|
! vac_guestroom_clg_stpt = 26.667
|
|
! vac_guestroom_people_sch = ALWAYS_OFF
|
|
! vac_guestroom_thm_sch = VacGuestRoom Thermostat Dual SP Control
|
|
! s_OccGuestRoom_ClgSP_sch = OBCReset_S_OccGuestRoom_ClgSP_Sch_20min
|
|
! s_OccGuestRoom_HtgSP_sch = OBCReset_S_OccGuestRoom_HtgSP_Sch_20min
|
|
! n_OccGuestRoom_ClgSP_sch = OBCReset_N_OccGuestRoom_ClgSP_Sch_20min
|
|
! n_OccGuestRoom_HtgSP_sch = OBCReset_N_OccGuestRoom_HtgSP_Sch_20min
|
|
! con_swingdoor_r = 0.475963827
|
|
! con_overheaddoor_r = 0.567741935
|
|
! CHW_deltaT = 8.33
|
|
! HOTW_PumpCurve_flag = pump_ride_on_curve
|
|
! occ_guestroom_Htg_stpt = 18.889
|
|
! occ_guestroom_Clg_stpt = 23.333
|
|
! nonres_window_u_factor = 0.34
|
|
! nonres_window_shgc = 0.38
|
|
! nonresLSG = 1.1
|
|
! res_window_u_factor = 0.35
|
|
! res_window_shgc = 0.38
|
|
! resLSG = 1.1
|
|
! AnalysisPurpose = ProgressIndicator
|
|
! AnalysisCodeName = ASHRAE901
|
|
! AnalysisCodeYear = 2019
|
|
! AnalysisAmendment = NoneAmend
|
|
! AnalysisPrototype = HotelLarge
|
|
! AnalysisScope = National
|
|
! AnalysisState = National
|
|
! AnalysisClimateZone = 6A
|
|
! AnalysisCity = USA_MN_Rochester
|
|
! var_Ffactor_IP = 0.51
|
|
! var_Cfactor_IP = 0.092
|
|
! GuestRoom_SWH_flow = 1.31389e-06
|
|
! cop_walkin_freezer = 2.32
|
|
! cop_walkin_cooler = 6.98
|
|
|
|
|
|
|
|
|
|
! specify overhang_pf for 1891 codes
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Version,9.0;
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SIMULATIONCONTROL ===========
|
|
|
|
SimulationControl,
|
|
Yes, !- Do Zone Sizing Calculation
|
|
Yes, !- Do System Sizing Calculation
|
|
Yes, !- Do Plant Sizing Calculation
|
|
No, !- Run Simulation for Sizing Periods
|
|
YES; !- Run Simulation for Weather File Run Periods
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: BUILDING ===========
|
|
|
|
Building,
|
|
HotelLarge, !- Name
|
|
0.0000, !- North Axis {deg}
|
|
City, !- Terrain
|
|
0.0400, !- Loads Convergence Tolerance Value
|
|
0.2000, !- Temperature Convergence Tolerance Value {deltaC}
|
|
FullInteriorAndExterior, !- Solar Distribution
|
|
25, !- Maximum Number of Warmup Days
|
|
6; !- Minimum Number of Warmup Days
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SHADOWCALCULATION ===========
|
|
|
|
ShadowCalculation,
|
|
AverageOverDaysInFrequency, !- Calculation Method
|
|
7, !- Calculation Frequency
|
|
15000; !- Maximum Figures in Shadow Overlap Calculations
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SURFACECONVECTIONALGORITHM:INSIDE ===========
|
|
|
|
SurfaceConvectionAlgorithm:Inside,TARP;
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SURFACECONVECTIONALGORITHM:OUTSIDE ===========
|
|
|
|
SurfaceConvectionAlgorithm:Outside,DOE-2;
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: HEATBALANCEALGORITHM ===========
|
|
|
|
HeatBalanceAlgorithm,ConductionTransferFunction,200.0000;
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: TIMESTEP ===========
|
|
|
|
Timestep,6;
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CONVERGENCELIMITS ===========
|
|
|
|
ConvergenceLimits,
|
|
1, !- Minimum System Timestep {minutes}
|
|
20; !- Maximum HVAC Iterations
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: RUNPERIOD ===========
|
|
|
|
RunPeriod,
|
|
, !- Name
|
|
1, !- Begin Month
|
|
1, !- Begin Day of Month
|
|
, !- Begin Year
|
|
12, !- End Month
|
|
31, !- End Day of Month
|
|
, !- End Year
|
|
Sunday, !- Day of Week for Start Day
|
|
No, !- Use Weather File Holidays and Special Days
|
|
No, !- Use Weather File Daylight Saving Period
|
|
No, !- Apply Weekend Holiday Rule
|
|
Yes, !- Use Weather File Rain Indicators
|
|
Yes; !- Use Weather File Snow Indicators
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: RUNPERIODCONTROL:SPECIALDAYS ===========
|
|
|
|
! US National Holidays
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
New Years Day, !- Name
|
|
January 1, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Veterans Day, !- Name
|
|
November 11, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Christmas, !- Name
|
|
December 25, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Independence Day, !- Name
|
|
July 4, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
MLK Day, !- Name
|
|
3rd Monday in January, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Presidents Day, !- Name
|
|
3rd Monday in February, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Memorial Day, !- Name
|
|
Last Monday in May, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Labor Day, !- Name
|
|
1st Monday in September, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Columbus Day, !- Name
|
|
2nd Monday in October, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Thanksgiving, !- Name
|
|
4th Thursday in November,!- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
!- =========== ALL OBJECTS IN CLASS: LOCATION ===========
|
|
! Site:Location and design-day objects created by:
|
|
! ../../_p.bin/ddy2idf /projects/bigsim/weather/EnergyPlus/tmy3.new/all/USA_MN_Rochester.Intl.AP.726440_TMY3.ddy
|
|
!
|
|
Site:Location,
|
|
Rochester International Arpt_MN_USA Design_Conditions, !- Site:Location Name
|
|
43.90, !- Latitude {N+ S-}
|
|
-92.50, !- Longitude {W- E+}
|
|
-6.00, !- Time Zone Relative to GMT {GMT+/-}
|
|
398.00; !- Elevation {m}
|
|
|
|
SizingPeriod:DesignDay,
|
|
Rochester International Arpt Ann Htg 99.6% Condns DB, !- Name
|
|
1, !- Month
|
|
21, !- Day of Month
|
|
WinterDesignDay,!- Day Type
|
|
-26.2, !- Maximum Dry-Bulb Temperature {C}
|
|
0.0, !- Daily Dry-Bulb Temperature Range {C}
|
|
DefaultMultipliers, !- Dry-Bulb Temperature Range Modifier Type
|
|
, !- Dry-Bulb Temperature Range Modifier Schedule Name
|
|
Wetbulb, !- Humidity Condition Type
|
|
-26.2, !- Wetbulb at Maximum Dry-Bulb {C}
|
|
, !- Humidity Indicating Day Schedule Name
|
|
, !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir}
|
|
, !- Enthalpy at Maximum Dry-Bulb {J/kg}
|
|
, !- Daily WetBulb Temperature Range {deltaC}
|
|
96634., !- Barometric Pressure {Pa}
|
|
5.7, !- Wind Speed {m/s} design conditions vs. traditional 6.71 m/s (15 mph)
|
|
310, !- Wind Direction {Degrees; N=0, S=180}
|
|
No, !- Rain {Yes/No}
|
|
No, !- Snow on ground {Yes/No}
|
|
No, !- Daylight Savings Time Indicator
|
|
ASHRAEClearSky, !- Solar Model Indicator
|
|
, !- Beam Solar Day Schedule Name
|
|
, !- Diffuse Solar Day Schedule Name
|
|
, !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub)
|
|
, !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud)
|
|
0.00; !- Clearness {0.0 to 1.1}
|
|
|
|
SizingPeriod:DesignDay,
|
|
Rochester International Arpt Ann Clg .4% Condns DB=>MWB, !- Name
|
|
7, !- Month
|
|
21, !- Day of Month
|
|
SummerDesignDay,!- Day Type
|
|
31.2, !- Maximum Dry-Bulb Temperature {C}
|
|
10.6, !- Daily Dry-Bulb Temperature Range {C}
|
|
DefaultMultipliers, !- Dry-Bulb Temperature Range Modifier Type
|
|
, !- Dry-Bulb Temperature Range Modifier Schedule Name
|
|
Wetbulb, !- Humidity Condition Type
|
|
23.1, !- Wetbulb at Maximum Dry-Bulb {C}
|
|
, !- Humidity Indicating Day Schedule Name
|
|
, !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir}
|
|
, !- Enthalpy at Maximum Dry-Bulb {J/kg}
|
|
, !- Daily WetBulb Temperature Range {deltaC}
|
|
96634., !- Barometric Pressure {Pa}
|
|
6.7, !- Wind Speed {m/s} design conditions vs. traditional 3.35 m/s (7mph)
|
|
200, !- Wind Direction {Degrees; N=0, S=180}
|
|
No, !- Rain {Yes/No}
|
|
No, !- Snow on ground {Yes/No}
|
|
No, !- Daylight Savings Time Indicator
|
|
ASHRAETau, !- Solar Model Indicator
|
|
, !- Beam Solar Day Schedule Name
|
|
, !- Diffuse Solar Day Schedule Name
|
|
0.404, !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub)
|
|
2.226; !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud)
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: WATER MAINS TEMPERATURES ===========
|
|
|
|
Site:WaterMainsTemperature,
|
|
Correlation, !- Calculation Method
|
|
, !- Temperature Schedule Name
|
|
6.375, !- Annual average outdoor air temperature {C}
|
|
33.5; !- Maximum difference in monthly average outdoor air temperatures {C}
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: Site:GroundTemperature:FCfactorMethod ===========
|
|
|
|
Site:GroundTemperature:FCfactorMethod,
|
|
7.4, !- January Ground Temperature {C}
|
|
-0.0, !- February Ground Temperature {C}
|
|
-7.6, !- March Ground Temperature {C}
|
|
-12.6, !- April Ground Temperature {C}
|
|
-7.7, !- May Ground Temperature {C}
|
|
0.3, !- June Ground Temperature {C}
|
|
7.0, !- July Ground Temperature {C}
|
|
14.2, !- August Ground Temperature {C}
|
|
19.2, !- September Ground Temperature {C}
|
|
20.9, !- October Ground Temperature {C}
|
|
20.0, !- November Ground Temperature {C}
|
|
15.4; !- December Ground Temperature {C}
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: MATERIAL:REGULAR-R ===========
|
|
|
|
Material:NoMass,
|
|
Opaque Door panel_con, !- Name
|
|
MediumRough, !- Roughness
|
|
0.475963827, !- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
Overhead Door_con Panel, !- Name
|
|
MediumRough, !- Roughness
|
|
0.567741935, !- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CONSTRUCTION ===========
|
|
|
|
Construction,
|
|
Swinging Door_con, !- Name
|
|
Opaque Door panel_con; !- Outside Layer
|
|
|
|
Construction,
|
|
Overhead Door_con, !- Name
|
|
Overhead Door_con Panel; !- Outside Layer
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: RUNPERIODCONTROL:DAYLIGHTSAVINGTIME ===========
|
|
|
|
! Daylight Saving Period in US
|
|
|
|
RunPeriodControl:DaylightSavingTime,
|
|
2nd Sunday in March, !- Start Date
|
|
1st Sunday in November; !- End Date
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OTHERSIDECOEFFICIENTS ===========
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SCHEDULETYPELIMITS ===========
|
|
|
|
ScheduleTypeLimits,
|
|
Any Number; !- Name
|
|
|
|
ScheduleTypeLimits,
|
|
Fraction, !- Name
|
|
0.0, !- Lower Limit Value
|
|
1.0, !- Upper Limit Value
|
|
CONTINUOUS; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Temperature, !- Name
|
|
-60, !- Lower Limit Value
|
|
200, !- Upper Limit Value
|
|
CONTINUOUS; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
On/Off, !- Name
|
|
0, !- Lower Limit Value
|
|
1, !- Upper Limit Value
|
|
DISCRETE; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Control Type, !- Name
|
|
0, !- Lower Limit Value
|
|
4, !- Upper Limit Value
|
|
DISCRETE; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Humidity, !- Name
|
|
10, !- Lower Limit Value
|
|
90, !- Upper Limit Value
|
|
CONTINUOUS; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Number; !- Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SCHEDULE:COMPACT ===========
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
BLDG_LIGHT_CORRIDOR_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 1:00,0.108459, !- Field 3
|
|
Until: 2:00,0.08134425, !- Field 4
|
|
Until: 5:00,0.0542295, !- Field 5
|
|
Until: 6:00,0.108459, !- Field 6
|
|
Until: 7:00,0.216918, !- Field 7
|
|
Until: 8:00,0.2711475, !- Field 8
|
|
Until: 10:00,0.216918, !- Field 9
|
|
Until: 18:00,0.13557375, !- Field 10
|
|
Until: 19:00,0.325377, !- Field 11
|
|
Until: 20:00,0.433836, !- Field 12
|
|
Until: 21:00,0.4880655, !- Field 13
|
|
Until: 22:00,0.433836, !- Field 14
|
|
Until: 23:00,0.325377, !- Field 15
|
|
Until: 24:00,0.1626885, !- Field 16
|
|
For: Saturday, !- Field 17
|
|
Until: 2:00,0.108459, !- Field 18
|
|
Until: 6:00,0.0542295, !- Field 19
|
|
Until: 8:00,0.1626885, !- Field 20
|
|
Until: 10:00,0.216918, !- Field 21
|
|
Until: 11:00,0.1626885, !- Field 22
|
|
Until: 18:00,0.13557375, !- Field 23
|
|
Until: 19:00,0.325377, !- Field 24
|
|
Until: 22:00,0.3796065, !- Field 25
|
|
Until: 23:00,0.325377, !- Field 26
|
|
Until: 24:00,0.1626885, !- Field 27
|
|
For: SummerDesignDay, !- Field 28
|
|
Until: 24:00,1, !- Field 29
|
|
For: WinterDesignDay, !- Field 30
|
|
Until: 24:00,0, !- Field 31
|
|
For: Sunday Holidays AllOtherDays, !- Field 32
|
|
Until: 2:00,0.1626885, !- Field 33
|
|
Until: 6:00,0.108459, !- Field 34
|
|
Until: 7:00,0.1626885, !- Field 35
|
|
Until: 9:00,0.216918, !- Field 36
|
|
Until: 13:00,0.1626885, !- Field 37
|
|
Until: 18:00,0.108459, !- Field 38
|
|
Until: 19:00,0.2711475, !- Field 39
|
|
Until: 20:00,0.3796065, !- Field 40
|
|
Until: 21:00,0.433836, !- Field 41
|
|
Until: 22:00,0.325377, !- Field 42
|
|
Until: 23:00,0.2711475, !- Field 43
|
|
Until: 24:00,0.1626885; !- Field 44
|
|
|
|
Schedule:Compact,
|
|
BLDG_LIGHT_GUESTROOM_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 1:00,0.11, !- Field 3
|
|
Until: 2:00,0.09, !- Field 4
|
|
Until: 5:00,0.06, !- Field 5
|
|
Until: 6:00,0.11, !- Field 6
|
|
Until: 7:00,0.35, !- Field 7
|
|
Until: 8:00,0.45, !- Field 8
|
|
Until: 10:00,0.35, !- Field 9
|
|
Until: 16:00,0.05, !- Field 10
|
|
Until: 17:00,0.064, !- Field 11
|
|
Until: 18:00,0.07, !- Field 12
|
|
Until: 19:00,0.54, !- Field 13
|
|
Until: 20:00,0.71, !- Field 14
|
|
Until: 21:00,0.8, !- Field 15
|
|
Until: 22:00,0.71, !- Field 16
|
|
Until: 23:00,0.54, !- Field 17
|
|
Until: 24:00,0.26, !- Field 18
|
|
For: Saturday Sunday Holidays, !- Field 19
|
|
Until: 2:00,0.13, !- Field 20
|
|
Until: 6:00,0.06, !- Field 21
|
|
Until: 8:00,0.33, !- Field 22
|
|
Until: 9:00,0.45, !- Field 23
|
|
Until: 10:00,0.186667, !- Field 24
|
|
Until: 11:00,0.062121, !- Field 25
|
|
Until: 17:00,0.05, !- Field 26
|
|
Until: 18:00,0.0825, !- Field 27
|
|
Until: 19:00,0.68, !- Field 28
|
|
Until: 22:00,0.8, !- Field 29
|
|
Until: 23:00,0.68, !- Field 30
|
|
Until: 24:00,0.33, !- Field 31
|
|
For: WinterDesignDay, !- Field 32
|
|
Until: 24:00,0, !- Field 33
|
|
For: SummerDesignDay CustomDay1 CustomDay2, !- Field 34
|
|
Until: 24:00,1; !- Field 35
|
|
|
|
Schedule:Compact,
|
|
BLDG_LIGHT_MECHANIC_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 1:00,0.2, !- Field 3
|
|
Until: 2:00,0.15, !- Field 4
|
|
Until: 5:00,0.1, !- Field 5
|
|
Until: 6:00,0.2, !- Field 6
|
|
Until: 7:00,0.4, !- Field 7
|
|
Until: 8:00,0.5, !- Field 8
|
|
Until: 10:00,0.4, !- Field 9
|
|
Until: 18:00,0.25, !- Field 10
|
|
Until: 19:00,0.6, !- Field 11
|
|
Until: 20:00,0.8, !- Field 12
|
|
Until: 21:00,0.9, !- Field 13
|
|
Until: 22:00,0.8, !- Field 14
|
|
Until: 23:00,0.6, !- Field 15
|
|
Until: 24:00,0.3, !- Field 16
|
|
For: Saturday, !- Field 17
|
|
Until: 2:00,0.2, !- Field 18
|
|
Until: 6:00,0.1, !- Field 19
|
|
Until: 8:00,0.3, !- Field 20
|
|
Until: 10:00,0.4, !- Field 21
|
|
Until: 11:00,0.3, !- Field 22
|
|
Until: 18:00,0.25, !- Field 23
|
|
Until: 19:00,0.6, !- Field 24
|
|
Until: 22:00,0.7, !- Field 25
|
|
Until: 23:00,0.6, !- Field 26
|
|
Until: 24:00,0.3, !- Field 27
|
|
For: SummerDesignDay, !- Field 28
|
|
Until: 24:00,1, !- Field 29
|
|
For: WinterDesignDay, !- Field 30
|
|
Until: 24:00,0, !- Field 31
|
|
For: Sunday Holidays AllOtherDays, !- Field 32
|
|
Until: 2:00,0.3, !- Field 33
|
|
Until: 6:00,0.2, !- Field 34
|
|
Until: 7:00,0.3, !- Field 35
|
|
Until: 9:00,0.4, !- Field 36
|
|
Until: 13:00,0.3, !- Field 37
|
|
Until: 18:00,0.2, !- Field 38
|
|
Until: 19:00,0.5, !- Field 39
|
|
Until: 20:00,0.7, !- Field 40
|
|
Until: 21:00,0.8, !- Field 41
|
|
Until: 22:00,0.6, !- Field 42
|
|
Until: 23:00,0.5, !- Field 43
|
|
Until: 24:00,0.3; !- Field 44
|
|
|
|
Schedule:Compact,
|
|
BLDG_LIGHT_MISC_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 1:00,0.2, !- Field 3
|
|
Until: 2:00,0.15, !- Field 4
|
|
Until: 5:00,0.1, !- Field 5
|
|
Until: 6:00,0.2, !- Field 6
|
|
Until: 7:00,0.4, !- Field 7
|
|
Until: 8:00,0.5, !- Field 8
|
|
Until: 10:00,0.4, !- Field 9
|
|
Until: 18:00,0.25, !- Field 10
|
|
Until: 19:00,0.6, !- Field 11
|
|
Until: 20:00,0.8, !- Field 12
|
|
Until: 21:00,0.9, !- Field 13
|
|
Until: 22:00,0.8, !- Field 14
|
|
Until: 23:00,0.6, !- Field 15
|
|
Until: 24:00,0.3, !- Field 16
|
|
For: Saturday, !- Field 17
|
|
Until: 2:00,0.2, !- Field 18
|
|
Until: 6:00,0.1, !- Field 19
|
|
Until: 8:00,0.3, !- Field 20
|
|
Until: 10:00,0.4, !- Field 21
|
|
Until: 11:00,0.3, !- Field 22
|
|
Until: 18:00,0.25, !- Field 23
|
|
Until: 19:00,0.6, !- Field 24
|
|
Until: 22:00,0.7, !- Field 25
|
|
Until: 23:00,0.6, !- Field 26
|
|
Until: 24:00,0.3, !- Field 27
|
|
For: SummerDesignDay, !- Field 28
|
|
Until: 24:00,1, !- Field 29
|
|
For: WinterDesignDay, !- Field 30
|
|
Until: 24:00,0, !- Field 31
|
|
For: Sunday Holidays AllOtherDays, !- Field 32
|
|
Until: 2:00,0.3, !- Field 33
|
|
Until: 6:00,0.2, !- Field 34
|
|
Until: 7:00,0.3, !- Field 35
|
|
Until: 9:00,0.4, !- Field 36
|
|
Until: 13:00,0.3, !- Field 37
|
|
Until: 18:00,0.2, !- Field 38
|
|
Until: 19:00,0.5, !- Field 39
|
|
Until: 20:00,0.7, !- Field 40
|
|
Until: 21:00,0.8, !- Field 41
|
|
Until: 22:00,0.6, !- Field 42
|
|
Until: 23:00,0.5, !- Field 43
|
|
Until: 24:00,0.3; !- Field 44
|
|
|
|
Schedule:Compact,
|
|
BLDG_LIGHT_OFFICE_BSMT_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 1:00,0.1788375, !- Field 3
|
|
Until: 2:00,0.134128125, !- Field 4
|
|
Until: 5:00,0.08941875, !- Field 5
|
|
Until: 6:00,0.1788375, !- Field 6
|
|
Until: 7:00,0.357675, !- Field 7
|
|
Until: 8:00,0.44709375, !- Field 8
|
|
Until: 10:00,0.357675, !- Field 9
|
|
Until: 18:00,0.223546875, !- Field 10
|
|
Until: 19:00,0.5365125, !- Field 11
|
|
Until: 20:00,0.71535, !- Field 12
|
|
Until: 21:00,0.80476875, !- Field 13
|
|
Until: 22:00,0.71535, !- Field 14
|
|
Until: 23:00,0.5365125, !- Field 15
|
|
Until: 24:00,0.26825625, !- Field 16
|
|
For: Saturday, !- Field 17
|
|
Until: 2:00,0.1788375, !- Field 18
|
|
Until: 6:00,0.08941875, !- Field 19
|
|
Until: 8:00,0.26825625, !- Field 20
|
|
Until: 10:00,0.357675, !- Field 21
|
|
Until: 11:00,0.26825625, !- Field 22
|
|
Until: 18:00,0.223546875, !- Field 23
|
|
Until: 19:00,0.5365125, !- Field 24
|
|
Until: 22:00,0.62593125, !- Field 25
|
|
Until: 23:00,0.5365125, !- Field 26
|
|
Until: 24:00,0.26825625, !- Field 27
|
|
For: SummerDesignDay, !- Field 28
|
|
Until: 24:00,1, !- Field 29
|
|
For: WinterDesignDay, !- Field 30
|
|
Until: 24:00,0, !- Field 31
|
|
For: Sunday Holidays AllOtherDays, !- Field 32
|
|
Until: 2:00,0.26825625, !- Field 33
|
|
Until: 6:00,0.1788375, !- Field 34
|
|
Until: 7:00,0.26825625, !- Field 35
|
|
Until: 9:00,0.357675, !- Field 36
|
|
Until: 13:00,0.26825625, !- Field 37
|
|
Until: 18:00,0.1788375, !- Field 38
|
|
Until: 19:00,0.44709375, !- Field 39
|
|
Until: 20:00,0.62593125, !- Field 40
|
|
Until: 21:00,0.71535, !- Field 41
|
|
Until: 22:00,0.5365125, !- Field 42
|
|
Until: 23:00,0.44709375, !- Field 43
|
|
Until: 24:00,0.26825625; !- Field 44
|
|
|
|
Schedule:Compact,
|
|
BLDG_LIGHT_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 1:00,0.2, !- Field 3
|
|
Until: 2:00,0.15, !- Field 4
|
|
Until: 5:00,0.1, !- Field 5
|
|
Until: 6:00,0.2, !- Field 6
|
|
Until: 7:00,0.4, !- Field 7
|
|
Until: 8:00,0.5, !- Field 8
|
|
Until: 10:00,0.4, !- Field 9
|
|
Until: 18:00,0.25, !- Field 10
|
|
Until: 19:00,0.6, !- Field 11
|
|
Until: 20:00,0.8, !- Field 12
|
|
Until: 21:00,0.9, !- Field 13
|
|
Until: 22:00,0.8, !- Field 14
|
|
Until: 23:00,0.6, !- Field 15
|
|
Until: 24:00,0.3, !- Field 16
|
|
For: Saturday, !- Field 17
|
|
Until: 2:00,0.2, !- Field 18
|
|
Until: 6:00,0.1, !- Field 19
|
|
Until: 8:00,0.3, !- Field 20
|
|
Until: 10:00,0.4, !- Field 21
|
|
Until: 11:00,0.3, !- Field 22
|
|
Until: 18:00,0.25, !- Field 23
|
|
Until: 19:00,0.6, !- Field 24
|
|
Until: 22:00,0.7, !- Field 25
|
|
Until: 23:00,0.6, !- Field 26
|
|
Until: 24:00,0.3, !- Field 27
|
|
For: SummerDesignDay, !- Field 28
|
|
Until: 24:00,1, !- Field 29
|
|
For: WinterDesignDay, !- Field 30
|
|
Until: 24:00,0, !- Field 31
|
|
For: Sunday Holidays AllOtherDays, !- Field 32
|
|
Until: 2:00,0.3, !- Field 33
|
|
Until: 6:00,0.2, !- Field 34
|
|
Until: 7:00,0.3, !- Field 35
|
|
Until: 9:00,0.4, !- Field 36
|
|
Until: 13:00,0.3, !- Field 37
|
|
Until: 18:00,0.2, !- Field 38
|
|
Until: 19:00,0.5, !- Field 39
|
|
Until: 20:00,0.7, !- Field 40
|
|
Until: 21:00,0.8, !- Field 41
|
|
Until: 22:00,0.6, !- Field 42
|
|
Until: 23:00,0.5, !- Field 43
|
|
Until: 24:00,0.3; !- Field 44
|
|
|
|
Schedule:Compact,
|
|
BLDG_LIGHT_STORAGE_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 1:00,0.088996, !- Field 3
|
|
Until: 2:00,0.066747, !- Field 4
|
|
Until: 5:00,0.044498, !- Field 5
|
|
Until: 6:00,0.088996, !- Field 6
|
|
Until: 7:00,0.177992, !- Field 7
|
|
Until: 8:00,0.22249, !- Field 8
|
|
Until: 10:00,0.177992, !- Field 9
|
|
Until: 18:00,0.111245, !- Field 10
|
|
Until: 19:00,0.266988, !- Field 11
|
|
Until: 20:00,0.355984, !- Field 12
|
|
Until: 21:00,0.400482, !- Field 13
|
|
Until: 22:00,0.355984, !- Field 14
|
|
Until: 23:00,0.266988, !- Field 15
|
|
Until: 24:00,0.133494, !- Field 16
|
|
For: Saturday, !- Field 17
|
|
Until: 2:00,0.088996, !- Field 18
|
|
Until: 6:00,0.044498, !- Field 19
|
|
Until: 8:00,0.133494, !- Field 20
|
|
Until: 10:00,0.177992, !- Field 21
|
|
Until: 11:00,0.133494, !- Field 22
|
|
Until: 18:00,0.111245, !- Field 23
|
|
Until: 19:00,0.266988, !- Field 24
|
|
Until: 22:00,0.311486, !- Field 25
|
|
Until: 23:00,0.266988, !- Field 26
|
|
Until: 24:00,0.133494, !- Field 27
|
|
For: SummerDesignDay, !- Field 28
|
|
Until: 24:00,1, !- Field 29
|
|
For: WinterDesignDay, !- Field 30
|
|
Until: 24:00,0, !- Field 31
|
|
For: Sunday Holidays AllOtherDays, !- Field 32
|
|
Until: 2:00,0.133494, !- Field 33
|
|
Until: 6:00,0.088996, !- Field 34
|
|
Until: 7:00,0.133494, !- Field 35
|
|
Until: 9:00,0.177992, !- Field 36
|
|
Until: 13:00,0.133494, !- Field 37
|
|
Until: 18:00,0.088996, !- Field 38
|
|
Until: 19:00,0.22249, !- Field 39
|
|
Until: 20:00,0.311486, !- Field 40
|
|
Until: 21:00,0.355984, !- Field 41
|
|
Until: 22:00,0.266988, !- Field 42
|
|
Until: 23:00,0.22249, !- Field 43
|
|
Until: 24:00,0.133494; !- Field 44
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
walkin_occ_lght_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 1:00,0.104, !- Field 3
|
|
Until: 2:00,0.078, !- Field 5
|
|
Until: 5:00,0.052, !- Field 7
|
|
Until: 6:00,0.104, !- Field 9
|
|
Until: 7:00,0.208, !- Field 11
|
|
Until: 8:00,0.26, !- Field 13
|
|
Until: 10:00,0.208, !- Field 15
|
|
Until: 18:00,0.13, !- Field 17
|
|
Until: 19:00,0.312, !- Field 19
|
|
Until: 20:00,0.416, !- Field 21
|
|
Until: 21:00,0.468, !- Field 23
|
|
Until: 22:00,0.416, !- Field 25
|
|
Until: 23:00,0.312, !- Field 27
|
|
Until: 24:00,0.156, !- Field 29
|
|
For: Saturday, !- Field 31
|
|
Until: 2:00,0.104, !- Field 32
|
|
Until: 6:00,0.052, !- Field 34
|
|
Until: 8:00,0.156, !- Field 36
|
|
Until: 10:00,0.208, !- Field 38
|
|
Until: 11:00,0.156, !- Field 40
|
|
Until: 18:00,0.13, !- Field 42
|
|
Until: 19:00,0.312, !- Field 44
|
|
Until: 22:00,0.364, !- Field 46
|
|
Until: 23:00,0.312, !- Field 48
|
|
Until: 24:00,0.156, !- Field 50
|
|
For: SummerDesignDay, !- Field 52
|
|
Until: 24:00,1, !- Field 53
|
|
For: WinterDesignDay, !- Field 55
|
|
Until: 24:00,0, !- Field 56
|
|
For: Sunday Holidays AllOtherDays, !- Field 58
|
|
Until: 2:00,0.156, !- Field 59
|
|
Until: 6:00,0.104, !- Field 61
|
|
Until: 7:00,0.156, !- Field 63
|
|
Until: 9:00,0.208, !- Field 65
|
|
Until: 13:00,0.156, !- Field 67
|
|
Until: 18:00,0.104, !- Field 69
|
|
Until: 19:00,0.260, !- Field 71
|
|
Until: 20:00,0.364, !- Field 73
|
|
Until: 21:00,0.416, !- Field 75
|
|
Until: 22:00,0.312, !- Field 77
|
|
Until: 23:00,0.260, !- Field 79
|
|
Until: 24:00,0.156; !- Field 81
|
|
|
|
Schedule:Compact,
|
|
Exterior_Ltg_Sch, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 07:00,1.0, !- Field 3
|
|
Until: 19:00,0.0, !- Field 5
|
|
Until: 24:00,1.0; !- Field 7
|
|
|
|
|
|
Schedule:Compact,
|
|
BASEMENT_EQUIP_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 01:00,0.2857243092, !- Field 3
|
|
Until: 02:00,0.238103591, !- Field 5
|
|
Until: 05:00,0.1904828728, !- Field 7
|
|
Until: 06:00,0.2857243092, !- Field 9
|
|
Until: 07:00,0.476207182, !- Field 11
|
|
Until: 08:00,0.5714486184, !- Field 13
|
|
Until: 10:00,0.476207182, !- Field 15
|
|
Until: 18:00,0.3333450274, !- Field 17
|
|
Until: 19:00,0.6666900548, !- Field 19
|
|
Until: 20:00,0.8571729276, !- Field 21
|
|
Until: 21:00,0.9047936458, !- Field 23
|
|
Until: 22:00,0.8571729276, !- Field 25
|
|
Until: 23:00,0.6666900548, !- Field 27
|
|
Until: 24:00,0.3809657456, !- Field 29
|
|
For: Saturday, !- Field 31
|
|
Until: 02:00,0.2857243092, !- Field 32
|
|
Until: 06:00,0.1904828728, !- Field 34
|
|
Until: 08:00,0.3809657456, !- Field 36
|
|
Until: 10:00,0.476207182, !- Field 38
|
|
Until: 11:00,0.3809657456, !- Field 40
|
|
Until: 18:00,0.3333450274, !- Field 42
|
|
Until: 19:00,0.6666900548, !- Field 44
|
|
Until: 22:00,0.7619314912, !- Field 46
|
|
Until: 23:00,0.6666900548, !- Field 48
|
|
Until: 24:00,0.3809657456, !- Field 50
|
|
For: SummerDesignDay, !- Field 52
|
|
Until: 24:00,1.0, !- Field 53
|
|
For: WinterDesignDay, !- Field 55
|
|
Until: 24:00,0.0, !- Field 56
|
|
For: Sunday Holidays AllOtherDays, !- Field 58
|
|
Until: 02:00,0.3809657456, !- Field 59
|
|
Until: 06:00,0.2857243092, !- Field 61
|
|
Until: 07:00,0.3809657456, !- Field 63
|
|
Until: 09:00,0.476207182, !- Field 65
|
|
Until: 13:00,0.3809657456, !- Field 67
|
|
Until: 18:00,0.2857243092, !- Field 69
|
|
Until: 19:00,0.5714486184, !- Field 71
|
|
Until: 20:00,0.7619314912, !- Field 73
|
|
Until: 21:00,0.8571729276, !- Field 75
|
|
Until: 22:00,0.6666900548, !- Field 77
|
|
Until: 23:00,0.5714486184, !- Field 79
|
|
Until: 24:00,0.3809657456; !- Field 81
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
BLDG_EQUIP_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 01:00,0.3, !- Field 3
|
|
Until: 02:00,0.25, !- Field 5
|
|
Until: 05:00,0.2, !- Field 7
|
|
Until: 06:00,0.3, !- Field 9
|
|
Until: 07:00,0.5, !- Field 11
|
|
Until: 08:00,0.6, !- Field 13
|
|
Until: 10:00,0.5, !- Field 15
|
|
Until: 18:00,0.35, !- Field 17
|
|
Until: 19:00,0.7, !- Field 19
|
|
Until: 20:00,0.9, !- Field 21
|
|
Until: 21:00,0.95, !- Field 23
|
|
Until: 22:00,0.9, !- Field 25
|
|
Until: 23:00,0.7, !- Field 27
|
|
Until: 24:00,0.4, !- Field 29
|
|
For: Saturday, !- Field 31
|
|
Until: 02:00,0.3, !- Field 32
|
|
Until: 06:00,0.2, !- Field 34
|
|
Until: 08:00,0.4, !- Field 36
|
|
Until: 10:00,0.5, !- Field 38
|
|
Until: 11:00,0.4, !- Field 40
|
|
Until: 18:00,0.35, !- Field 42
|
|
Until: 19:00,0.7, !- Field 44
|
|
Until: 22:00,0.8, !- Field 46
|
|
Until: 23:00,0.7, !- Field 48
|
|
Until: 24:00,0.4, !- Field 50
|
|
For: SummerDesignDay, !- Field 52
|
|
Until: 24:00,1.0, !- Field 53
|
|
For: WinterDesignDay, !- Field 55
|
|
Until: 24:00,0.0, !- Field 56
|
|
For: Sunday Holidays AllOtherDays, !- Field 58
|
|
Until: 02:00,0.4, !- Field 59
|
|
Until: 06:00,0.3, !- Field 61
|
|
Until: 07:00,0.4, !- Field 63
|
|
Until: 09:00,0.5, !- Field 65
|
|
Until: 13:00,0.4, !- Field 67
|
|
Until: 18:00,0.3, !- Field 69
|
|
Until: 19:00,0.6, !- Field 71
|
|
Until: 20:00,0.8, !- Field 73
|
|
Until: 21:00,0.9, !- Field 75
|
|
Until: 22:00,0.7, !- Field 77
|
|
Until: 23:00,0.6, !- Field 79
|
|
Until: 24:00,0.4; !- Field 81
|
|
|
|
|
|
Schedule:Compact,
|
|
GuestRoom_Eqp_Sch_Base, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 06:00,0.20, !- Field 3
|
|
Until: 07:00,0.62, !- Field 5
|
|
Until: 08:00,0.90, !- Field 7
|
|
Until: 10:00,0.43, !- Field 9
|
|
Until: 17:00,0.26, !- Field 11
|
|
Until: 19:00,0.51, !- Field 13
|
|
Until: 20:00,0.49, !- Field 15
|
|
Until: 21:00,0.66, !- Field 17
|
|
Until: 22:00,0.70, !- Field 19
|
|
Until: 23:00,0.35, !- Field 21
|
|
Until: 24:00,0.20, !- Field 23
|
|
For: Saturday Sunday Holidays, !- Field 25
|
|
Until: 06:00,0.20, !- Field 26
|
|
Until: 07:00,0.3, !- Field 28
|
|
Until: 08:00,0.62, !- Field 30
|
|
Until: 09:00,0.90, !- Field 32
|
|
Until: 10:00,0.62, !- Field 34
|
|
Until: 17:00,0.29, !- Field 36
|
|
Until: 18:00,0.43, !- Field 38
|
|
Until: 19:00,0.51, !- Field 40
|
|
Until: 20:00,0.49, !- Field 42
|
|
Until: 21:00,0.66, !- Field 44
|
|
Until: 22:00,0.70, !- Field 46
|
|
Until: 23:00,0.35, !- Field 48
|
|
Until: 24:00,0.20, !- Field 50
|
|
For: WinterDesignDay, !- Field 52
|
|
Until: 24:00,0.0, !- Field 53
|
|
For: SummerDesignDay CustomDay1 CustomDay2, !- Field 55
|
|
Until: 24:00,1.0; !- Field 56
|
|
|
|
Schedule:Compact,
|
|
GuestRoom_Eqp_Sch_Adva, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 06:00,0.17, !- Field 3
|
|
Until: 07:00,0.62, !- Field 5
|
|
Until: 08:00,0.90, !- Field 7
|
|
Until: 10:00,0.43, !- Field 9
|
|
Until: 16:00,0.12, !- Field 11
|
|
Until: 17:00,0.19, !- Field 13
|
|
Until: 19:00,0.48, !- Field 15
|
|
Until: 20:00,0.46, !- Field 17
|
|
Until: 21:00,0.62, !- Field 19
|
|
Until: 22:00,0.69, !- Field 21
|
|
Until: 23:00,0.34, !- Field 23
|
|
Until: 24:00,0.17, !- Field 25
|
|
For: Saturday Sunday Holidays, !- Field 27
|
|
Until: 06:00,0.17, !- Field 28
|
|
Until: 07:00,0.3, !- Field 30
|
|
Until: 08:00,0.62, !- Field 32
|
|
Until: 09:00,0.90, !- Field 34
|
|
Until: 10:00,0.62, !- Field 36
|
|
Until: 16:00,0.13, !- Field 38
|
|
Until: 17:00,0.21, !- Field 40
|
|
Until: 18:00,0.40, !- Field 42
|
|
Until: 19:00,0.48, !- Field 44
|
|
Until: 20:00,0.46, !- Field 46
|
|
Until: 21:00,0.62, !- Field 48
|
|
Until: 22:00,0.69, !- Field 50
|
|
Until: 23:00,0.34, !- Field 52
|
|
Until: 24:00,0.17, !- Field 54
|
|
For: WinterDesignDay, !- Field 56
|
|
Until: 24:00,0.0, !- Field 57
|
|
For: SummerDesignDay CustomDay1 CustomDay2, !- Field 59
|
|
Until: 24:00,1.0; !- Field 60
|
|
|
|
Schedule:Compact,
|
|
Lobby_Eqp_Sch, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays Saturday Sunday Holidays, !- Field 2
|
|
Until: 05:00,0.21, !- Field 3
|
|
Until: 06:00,0.68, !- Field 5
|
|
Until: 10:00,1.0, !- Field 7
|
|
Until: 11:00,0.32, !- Field 9
|
|
Until: 23:00,0.23, !- Field 11
|
|
Until: 24:00,0.21, !- Field 13
|
|
For: WinterDesignDay, !- Field 15
|
|
Until: 24:00,0.0, !- Field 16
|
|
For: SummerDesignDay CustomDay1 CustomDay2, !- Field 18
|
|
Until: 24:00,1.0; !- Field 19
|
|
|
|
Schedule:Compact,
|
|
Office_Eqp_Sch, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 05:00,0.33, !- Field 3
|
|
Until: 07:00,0.38, !- Field 5
|
|
Until: 08:00,0.43, !- Field 7
|
|
Until: 10:00,0.43, !- Field 9
|
|
Until: 12:00,1.0, !- Field 11
|
|
Until: 13:00,0.94, !- Field 13
|
|
Until: 17:00,1.0, !- Field 15
|
|
Until: 18:00,0.75, !- Field 17
|
|
Until: 20:00,0.63, !- Field 19
|
|
Until: 22:00,0.48, !- Field 21
|
|
Until: 24:00,0.33, !- Field 23
|
|
For: Saturday Sunday Holidays, !- Field 25
|
|
Until: 05:00,0.33, !- Field 26
|
|
Until: 07:00,0.38, !- Field 28
|
|
Until: 08:00,0.43, !- Field 30
|
|
Until: 18:00,0.63, !- Field 32
|
|
Until: 22:00,0.48, !- Field 34
|
|
Until: 24:00,0.33, !- Field 36
|
|
For: WinterDesignDay, !- Field 38
|
|
Until: 24:00,0.0, !- Field 39
|
|
For: SummerDesignDay CustomDay1 CustomDay2, !- Field 41
|
|
Until: 24:00,1.0; !- Field 42
|
|
|
|
Schedule:Compact,
|
|
EmployeeLounge_Eqp_Sch, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 05:00,0.11, !- Field 3
|
|
Until: 07:00,0.19, !- Field 5
|
|
Until: 08:00,0.25, !- Field 7
|
|
Until: 10:00,1.0, !- Field 9
|
|
Until: 12:00,0.86, !- Field 11
|
|
Until: 13:00,1.0, !- Field 13
|
|
Until: 18:00,0.86, !- Field 15
|
|
Until: 19:00,0.25, !- Field 17
|
|
Until: 20:00,0.19, !- Field 19
|
|
Until: 24:00,0.11, !- Field 21
|
|
For: Saturday Sunday Holidays, !- Field 23
|
|
Until: 05:00,0.11, !- Field 24
|
|
Until: 07:00,0.19, !- Field 26
|
|
Until: 08:00,0.25, !- Field 28
|
|
Until: 10:00,1.0, !- Field 30
|
|
Until: 12:00,0.86, !- Field 32
|
|
Until: 13:00,1.0, !- Field 34
|
|
Until: 18:00,0.86, !- Field 36
|
|
Until: 19:00,0.25, !- Field 38
|
|
Until: 20:00,0.19, !- Field 40
|
|
Until: 24:00,0.11, !- Field 42
|
|
For: WinterDesignDay, !- Field 44
|
|
Until: 24:00,0.0, !- Field 45
|
|
For: SummerDesignDay CustomDay1 CustomDay2, !- Field 47
|
|
Until: 24:00,1.0; !- Field 48
|
|
|
|
Schedule:Compact,
|
|
LaundryRoom_Eqp_Elec_Sch,!- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays Saturday Sunday Holidays, !- Field 2
|
|
Until: 08:00,0.0, !- Field 3
|
|
Until: 16:00,1.0, !- Field 5
|
|
Until: 24:00,0.0, !- Field 7
|
|
For: WinterDesignDay, !- Field 9
|
|
Until: 24:00,0.0, !- Field 10
|
|
For: SummerDesignDay CustomDay1 CustomDay2, !- Field 12
|
|
Until: 24:00,1.0; !- Field 13
|
|
|
|
Schedule:Compact,
|
|
LaundryRoom_Eqp_Gas_Sch, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays Saturday Sunday Holidays, !- Field 2
|
|
Until: 9:00,0.0, !- Field 3
|
|
Until: 17:00,1.0, !- Field 5
|
|
Until: 24:00,0.0, !- Field 7
|
|
For: WinterDesignDay, !- Field 9
|
|
Until: 24:00,0.0, !- Field 10
|
|
For: SummerDesignDay CustomDay1 CustomDay2, !- Field 12
|
|
Until: 24:00,1.0; !- Field 13
|
|
|
|
Schedule:Compact,
|
|
MeetingRoom_Eqp_Sch, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 07:00,0.0, !- Field 3
|
|
Until: 08:00,0.05, !- Field 5
|
|
Until: 10:00,0.54, !- Field 7
|
|
Until: 12:00,0.26, !- Field 9
|
|
Until: 13:00,0.05, !- Field 11
|
|
Until: 15:00,0.54, !- Field 13
|
|
Until: 18:00,0.26, !- Field 15
|
|
Until: 20:00,0.05, !- Field 17
|
|
Until: 24:00,0.0; !- Field 19
|
|
|
|
Schedule:Compact,
|
|
ExerciseRoom_Eqp_Sch, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 06:00,0.0, !- Field 3
|
|
Until: 07:00,0.5, !- Field 5
|
|
Until: 9:00,1.0, !- Field 7
|
|
Until: 12:00,0.5, !- Field 9
|
|
Until: 13:00,0.0, !- Field 11
|
|
Until: 16:00,0.5, !- Field 13
|
|
Until: 17:00,1.0, !- Field 15
|
|
Until: 19:00,0.50, !- Field 17
|
|
Until: 21:00,1.0, !- Field 19
|
|
Until: 23:00,0.5, !- Field 21
|
|
Until: 24:00,0.0; !- Field 23
|
|
|
|
Schedule:Compact,
|
|
Kitchen_Elec_Equip_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekday, !- Field 2
|
|
Until: 06:00,0.1, !- Field 3
|
|
Until: 07:00,0.25, !- Field 5
|
|
Until: 24:00,0.3, !- Field 7
|
|
For: Saturday, !- Field 9
|
|
Until: 06:00,0.1, !- Field 10
|
|
Until: 07:00,0.25, !- Field 12
|
|
Until: 24:00,0.3, !- Field 14
|
|
For: SummerDesignDay, !- Field 16
|
|
Until: 24:00,0.3, !- Field 17
|
|
For: WinterDesignDay, !- Field 19
|
|
Until: 24:00,0.0, !- Field 20
|
|
For: Sunday Holidays AllOtherDays, !- Field 22
|
|
Until: 06:00,0.1, !- Field 23
|
|
Until: 07:00,0.25, !- Field 25
|
|
Until: 24:00,0.3; !- Field 27
|
|
|
|
Schedule:Compact,
|
|
Kitchen_Gas_Equip_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays Saturday, !- Field 2
|
|
Until: 05:00,0.02, !- Field 3
|
|
Until: 06:00,0.05, !- Field 5
|
|
Until: 07:00,0.1, !- Field 7
|
|
Until: 08:00,0.15, !- Field 9
|
|
Until: 09:00,0.2, !- Field 11
|
|
Until: 10:00,0.15, !- Field 13
|
|
Until: 13:00,0.25, !- Field 15
|
|
Until: 14:00,0.2, !- Field 17
|
|
Until: 15:00,0.15, !- Field 19
|
|
Until: 16:00,0.2, !- Field 21
|
|
Until: 19:00,0.3, !- Field 23
|
|
Until: 21:00,0.20, !- Field 25
|
|
Until: 22:00,0.15, !- Field 27
|
|
Until: 23:00,0.10, !- Field 29
|
|
Until: 24:00,0.05, !- Field 31
|
|
For: SummerDesignDay, !- Field 33
|
|
Until: 24:00,0.25, !- Field 34
|
|
For: WinterDesignDay, !- Field 36
|
|
Until: 24:00,0.0, !- Field 37
|
|
For: Sunday Holidays AllOtherDays, !- Field 39
|
|
Until: 05:00,0.02, !- Field 40
|
|
Until: 06:00,0.05, !- Field 42
|
|
Until: 07:00,0.1, !- Field 44
|
|
Until: 08:00,0.15, !- Field 46
|
|
Until: 09:00,0.2, !- Field 48
|
|
Until: 10:00,0.15, !- Field 50
|
|
Until: 13:00,0.25, !- Field 52
|
|
Until: 14:00,0.2, !- Field 54
|
|
Until: 15:00,0.15, !- Field 56
|
|
Until: 16:00,0.2, !- Field 58
|
|
Until: 19:00,0.3, !- Field 60
|
|
Until: 21:00,0.20, !- Field 62
|
|
Until: 22:00,0.15, !- Field 64
|
|
Until: 23:00,0.10, !- Field 66
|
|
Until: 24:00,0.05; !- Field 68
|
|
|
|
|
|
Schedule:Compact,
|
|
Kitchen_Exhaust_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 07:00,0, !- Field 3
|
|
Until: 24:00,1; !- Field 5
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
BLDG_ELEVATORS, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignday, !- Field 2
|
|
Until: 24:00,0.5, !- Field 3
|
|
For: WinterDesignDay, !- Field 5
|
|
Until: 24:00,0.05, !- Field 6
|
|
For: AllOtherDays, !- Field 8
|
|
Until: 04:00,0.05, !- Field 9
|
|
Until: 05:00,0.10, !- Field 11
|
|
Until: 06:00,0.20, !- Field 13
|
|
Until: 07:00,0.40, !- Field 15
|
|
Until: 09:00,0.50, !- Field 17
|
|
Until: 10:00,0.35, !- Field 19
|
|
Until: 16:00,0.15, !- Field 21
|
|
Until: 17:00,0.35, !- Field 23
|
|
Until: 19:00,0.50, !- Field 25
|
|
Until: 21:00,0.40, !- Field 27
|
|
Until: 22:00,0.30, !- Field 29
|
|
Until: 23:00,0.20, !- Field 31
|
|
Until: 24:00,0.10; !- Field 33
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
ELEV_LIGHT_FAN_SCH_24_7, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
ELEV_LIGHT_FAN_SCH_ADD_DF, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignday, !- Field 2
|
|
Until: 24:00,0.5, !- Field 3
|
|
For: WinterDesignDay, !- Field 5
|
|
Until: 24:00,0.05, !- Field 6
|
|
For: AllOtherDays, !- Field 8
|
|
Until: 04:00,0.05, !- Field 9
|
|
Until: 05:00,0.10, !- Field 11
|
|
Until: 06:00,0.20, !- Field 13
|
|
Until: 07:00,0.40, !- Field 15
|
|
Until: 09:00,0.50, !- Field 17
|
|
Until: 10:00,0.35, !- Field 19
|
|
Until: 16:00,0.15, !- Field 21
|
|
Until: 17:00,0.35, !- Field 23
|
|
Until: 19:00,0.50, !- Field 25
|
|
Until: 21:00,0.40, !- Field 27
|
|
Until: 22:00,0.30, !- Field 29
|
|
Until: 23:00,0.20, !- Field 31
|
|
Until: 24:00,0.10; !- Field 33
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
BLDG_OCC_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 06:00,0.9, !- Field 3
|
|
Until: 07:00,0.7, !- Field 5
|
|
Until: 09:00,0.4, !- Field 7
|
|
Until: 15:00,0.2, !- Field 9
|
|
Until: 16:00,0.3, !- Field 11
|
|
Until: 19:00,0.5, !- Field 13
|
|
Until: 21:00,0.7, !- Field 15
|
|
Until: 22:00,0.8, !- Field 17
|
|
Until: 24:00,0.9, !- Field 19
|
|
For: SummerDesignDay, !- Field 21
|
|
Until: 24:00,1.0, !- Field 22
|
|
For: Saturday, !- Field 24
|
|
Until: 06:00,0.9, !- Field 25
|
|
Until: 07:00,0.7, !- Field 27
|
|
Until: 09:00,0.5, !- Field 29
|
|
Until: 17:00,0.3, !- Field 31
|
|
Until: 18:00,0.5, !- Field 33
|
|
Until: 21:00,0.6, !- Field 35
|
|
Until: 24:00,0.7, !- Field 37
|
|
For: WinterDesignDay, !- Field 39
|
|
Until: 24:00,0.0, !- Field 40
|
|
For: Sunday Holidays AllOtherDays, !- Field 42
|
|
Until: 08:00,0.7, !- Field 43
|
|
Until: 11:00,0.5, !- Field 45
|
|
Until: 13:00,0.3, !- Field 47
|
|
Until: 16:00,0.2, !- Field 49
|
|
Until: 17:00,0.3, !- Field 51
|
|
Until: 19:00,0.4, !- Field 53
|
|
Until: 21:00,0.6, !- Field 55
|
|
Until: 24:00,0.8; !- Field 57
|
|
|
|
Schedule:Compact,
|
|
GuestRoom_Occ_Sch, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 06:00, !- Field 3
|
|
1.0, !- Field 4
|
|
Until: 07:00, !- Field 5
|
|
0.77, !- Field 6
|
|
Until: 09:00, !- Field 7
|
|
0.43, !- Field 8
|
|
Until: 15:00, !- Field 9
|
|
0.2, !- Field 10
|
|
Until: 16:00, !- Field 11
|
|
0.31, !- Field 12
|
|
Until: 19:00, !- Field 13
|
|
0.54, !- Field 14
|
|
Until: 21:00, !- Field 15
|
|
0.77, !- Field 16
|
|
Until: 22:00, !- Field 17
|
|
0.89, !- Field 18
|
|
Until: 24:00, !- Field 19
|
|
1.0, !- Field 20
|
|
For: Saturday Sunday Holidays, !- Field 21
|
|
Until: 06:00, !- Field 22
|
|
1.0, !- Field 23
|
|
Until: 07:00, !- Field 24
|
|
0.77, !- Field 25
|
|
Until: 09:00, !- Field 26
|
|
0.53, !- Field 27
|
|
Until: 17:00, !- Field 28
|
|
0.3, !- Field 29
|
|
Until: 18:00, !- Field 30
|
|
0.53, !- Field 31
|
|
Until: 19:00, !- Field 32
|
|
0.54, !- Field 33
|
|
Until: 21:00, !- Field 34
|
|
0.65, !- Field 35
|
|
Until: 24:00, !- Field 36
|
|
0.77, !- Field 37
|
|
For: WinterDesignDay, !- Field 38
|
|
Until: 24:00, !- Field 39
|
|
0, !- Field 40
|
|
For: SummerDesignDay CustomDay1 CustomDay2, !- Field 41
|
|
Until: 24:00, !- Field 42
|
|
1.0; !- Field 43
|
|
|
|
Schedule:Compact,
|
|
Lobby_Occ_Sch, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 05:00,0.1, !- Field 3
|
|
Until: 06:00,0.3, !- Field 5
|
|
Until: 10:00,0.7, !- Field 7
|
|
Until: 16:00,0.2, !- Field 9
|
|
Until: 18:00,0.4, !- Field 11
|
|
Until: 22:00,0.2, !- Field 13
|
|
Until: 24:00,0.1, !- Field 15
|
|
For: Saturday Sunday Holidays, !- Field 17
|
|
Until: 06:00,0.1, !- Field 18
|
|
Until: 07:00,0.3, !- Field 20
|
|
Until: 10:00,0.7, !- Field 22
|
|
Until: 22:00,0.2, !- Field 24
|
|
Until: 24:00,0.1, !- Field 26
|
|
For: WinterDesignDay, !- Field 28
|
|
Until: 24:00,0, !- Field 29
|
|
For: SummerDesignDay CustomDay1 CustomDay2, !- Field 31
|
|
Until: 24:00,1.0; !- Field 32
|
|
|
|
Schedule:Compact,
|
|
Office_Occ_Sch, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 06:00,0.2, !- Field 3
|
|
Until: 07:00,0.3, !- Field 5
|
|
Until: 08:00,0.4, !- Field 7
|
|
Until: 12:00,1.0, !- Field 9
|
|
Until: 13:00,0.5, !- Field 11
|
|
Until: 17:00,1.0, !- Field 13
|
|
Until: 18:00,0.4, !- Field 15
|
|
Until: 19:00,0.3, !- Field 17
|
|
Until: 24:00,0.2, !- Field 19
|
|
For: Saturday Sunday Holidays, !- Field 21
|
|
Until: 07:00,0.2, !- Field 22
|
|
Until: 08:00,0.3, !- Field 24
|
|
Until: 17:00,0.5, !- Field 26
|
|
Until: 18:00,0.3, !- Field 28
|
|
Until: 24:00,0.2, !- Field 30
|
|
For: WinterDesignDay, !- Field 32
|
|
Until: 24:00,0, !- Field 33
|
|
For: SummerDesignDay CustomDay1 CustomDay2, !- Field 35
|
|
Until: 24:00,1.0; !- Field 36
|
|
|
|
Schedule:Compact,
|
|
EmployeeLounge_Occ_Sch, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 05:00,0.0, !- Field 3
|
|
Until: 07:00,0.1, !- Field 5
|
|
Until: 12:00,0.2, !- Field 7
|
|
Until: 13:00,0.7, !- Field 9
|
|
Until: 18:00,0.2, !- Field 11
|
|
Until: 20:00,0.1, !- Field 13
|
|
Until: 24:00,0.0, !- Field 15
|
|
For: Saturday Sunday Holidays, !- Field 17
|
|
Until: 05:00,0.0, !- Field 18
|
|
Until: 08:00,0.05, !- Field 20
|
|
Until: 12:00,0.1, !- Field 22
|
|
Until: 13:00,0.2, !- Field 24
|
|
Until: 18:00,0.1, !- Field 26
|
|
Until: 20:00,0.05, !- Field 28
|
|
Until: 24:00,0.0, !- Field 30
|
|
For: WinterDesignDay, !- Field 32
|
|
Until: 24:00,0.0, !- Field 33
|
|
For: SummerDesignDay CustomDay1 CustomDay2, !- Field 35
|
|
Until: 24:00,1.0; !- Field 36
|
|
|
|
Schedule:Compact,
|
|
MeetingRoom_Occ_Sch, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 07:00,0.0, !- Field 3
|
|
Until: 08:00,0.05, !- Field 5
|
|
Until: 10:00,0.5, !- Field 7
|
|
Until: 12:00,0.2, !- Field 9
|
|
Until: 13:00,0.05, !- Field 11
|
|
Until: 15:00,0.5, !- Field 13
|
|
Until: 18:00,0.2, !- Field 15
|
|
Until: 20:00,0.05, !- Field 17
|
|
Until: 24:00,0.0, !- Field 19
|
|
For: Saturday Sunday Holidays, !- Field 21
|
|
Until: 07:00,0.0, !- Field 22
|
|
Until: 08:00,0.05, !- Field 24
|
|
Until: 10:00,0.5, !- Field 26
|
|
Until: 12:00,0.2, !- Field 28
|
|
Until: 13:00,0.05, !- Field 30
|
|
Until: 15:00,0.5, !- Field 32
|
|
Until: 18:00,0.2, !- Field 34
|
|
Until: 20:00,0.05, !- Field 36
|
|
Until: 24:00,0.0, !- Field 38
|
|
For: WinterDesignDay, !- Field 40
|
|
Until: 24:00,0.0, !- Field 41
|
|
For: SummerDesignDay CustomDay1 CustomDay2, !- Field 43
|
|
Until: 24:00,1.0; !- Field 44
|
|
|
|
Schedule:Compact,
|
|
LaundryRoom_Occ_Sch, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 08:00,0.0, !- Field 3
|
|
Until: 10:00,0.09, !- Field 5
|
|
Until: 12:00,0.18, !- Field 7
|
|
Until: 13:00,0.0, !- Field 9
|
|
Until: 16:00,0.18, !- Field 11
|
|
Until: 17:00,0.09, !- Field 13
|
|
Until: 24:00,0.0, !- Field 15
|
|
For: Saturday Sunday Holidays, !- Field 17
|
|
Until: 08:00,0.0, !- Field 18
|
|
Until: 10:00,0.09, !- Field 20
|
|
Until: 12:00,0.18, !- Field 22
|
|
Until: 13:00,0.0, !- Field 24
|
|
Until: 16:00,0.18, !- Field 26
|
|
Until: 17:00,0.09, !- Field 28
|
|
Until: 24:00,0.0, !- Field 30
|
|
For: WinterDesignDay, !- Field 32
|
|
Until: 24:00,0.0, !- Field 33
|
|
For: SummerDesignDay CustomDay1 CustomDay2, !- Field 35
|
|
Until: 24:00,1.0; !- Field 36
|
|
|
|
Schedule:Compact,
|
|
ExerciseRoom_Occ_Sch, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 06:00,0.0, !- Field 3
|
|
Until: 07:00,0.5, !- Field 5
|
|
Until: 11:00,1.0, !- Field 7
|
|
Until: 12:00,0.5, !- Field 9
|
|
Until: 13:00,0.0, !- Field 11
|
|
Until: 22:00,1.0, !- Field 13
|
|
Until: 23:00,0.5, !- Field 15
|
|
Until: 24:00,0.0; !- Field 17
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
INFIL_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
INFIL_HALF_ON_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.5; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
INFIL_QUARTER_ON_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.25; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Booster Water Inlet Temp Schedule, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
THROUGH: 12/31, !- Field 1
|
|
FOR: AllDays, !- Field 2
|
|
UNTIL: 24:00,60.00; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Booster Water Setpoint Temp Schedule, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
THROUGH: 12/31, !- Field 1
|
|
FOR: AllDays, !- Field 2
|
|
UNTIL: 24:00,82.22; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Laundry Setpoint Temp Schedule, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
THROUGH: 12/31, !- Field 1
|
|
FOR: AllDays, !- Field 2
|
|
UNTIL: 24:00,82.22; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
LAUNDRY_SWH_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
THROUGH: 12/31, !- Field 1
|
|
FOR: AllDays, !- Field 2
|
|
UNTIL: 17:00,0.00, !- Field 3
|
|
UNTIL: 24:00,1.00; !- Field 5
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
BLDG_SWH_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 01:00,0.2, !- Field 3
|
|
Until: 04:00,0.15, !- Field 5
|
|
Until: 05:00,0.2, !- Field 7
|
|
Until: 06:00,0.25, !- Field 9
|
|
Until: 07:00,0.5, !- Field 11
|
|
Until: 08:00,0.6, !- Field 13
|
|
Until: 09:00,0.55, !- Field 15
|
|
Until: 10:00,0.45, !- Field 17
|
|
Until: 11:00,0.4, !- Field 19
|
|
Until: 12:00,0.45, !- Field 21
|
|
Until: 13:00,0.4, !- Field 23
|
|
Until: 14:00,0.35, !- Field 25
|
|
Until: 17:00,0.3, !- Field 27
|
|
Until: 18:00,0.4, !- Field 29
|
|
Until: 19:00,0.55, !- Field 31
|
|
Until: 20:00,0.6, !- Field 33
|
|
Until: 21:00,0.5, !- Field 35
|
|
Until: 22:00,0.55, !- Field 37
|
|
Until: 23:00,0.45, !- Field 39
|
|
Until: 24:00,0.25, !- Field 41
|
|
For: Saturday WinterDesignDay, !- Field 43
|
|
Until: 01:00,0.2, !- Field 44
|
|
Until: 04:00,0.15, !- Field 46
|
|
Until: 05:00,0.2, !- Field 48
|
|
Until: 06:00,0.25, !- Field 50
|
|
Until: 07:00,0.4, !- Field 52
|
|
Until: 10:00,0.5, !- Field 54
|
|
Until: 11:00,0.45, !- Field 56
|
|
Until: 13:00,0.5, !- Field 58
|
|
Until: 14:00,0.45, !- Field 60
|
|
Until: 16:00,0.4, !- Field 62
|
|
Until: 17:00,0.35, !- Field 64
|
|
Until: 18:00,0.4, !- Field 66
|
|
Until: 20:00,0.55, !- Field 68
|
|
Until: 21:00,0.5, !- Field 70
|
|
Until: 22:00,0.55, !- Field 72
|
|
Until: 23:00,0.4, !- Field 74
|
|
Until: 24:00,0.3, !- Field 76
|
|
For: Sunday Holidays AllOtherDays, !- Field 78
|
|
Until: 01:00,0.25, !- Field 79
|
|
Until: 05:00,0.2, !- Field 81
|
|
Until: 06:00,0.3, !- Field 83
|
|
Until: 09:00,0.5, !- Field 85
|
|
Until: 10:00,0.55, !- Field 87
|
|
Until: 12:00,0.5, !- Field 89
|
|
Until: 14:00,0.4, !- Field 91
|
|
Until: 17:00,0.3, !- Field 93
|
|
Until: 18:00,0.4, !- Field 95
|
|
Until: 20:00,0.5, !- Field 97
|
|
Until: 21:00,0.4, !- Field 99
|
|
Until: 22:00,0.5, !- Field 101
|
|
Until: 23:00,0.4, !- Field 103
|
|
Until: 24:00,0.2; !- Field 105
|
|
|
|
Schedule:Compact,
|
|
GuestRoom_SWH_Sch, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 01:00,0.20, !- Field 3
|
|
Until: 04:00,0.15, !- Field 5
|
|
Until: 05:00,0.2, !- Field 7
|
|
Until: 06:00,0.35, !- Field 9
|
|
Until: 07:00,0.60, !- Field 11
|
|
Until: 08:00,0.80, !- Field 13
|
|
Until: 09:00,0.55, !- Field 15
|
|
Until: 10:00,0.40, !- Field 17
|
|
Until: 11:00,0.30, !- Field 19
|
|
Until: 17:00,0.20, !- Field 21
|
|
Until: 18:00,0.30, !- Field 23
|
|
Until: 19:00,0.55, !- Field 25
|
|
Until: 21:00,0.40, !- Field 27
|
|
Until: 22:00,0.60, !- Field 29
|
|
Until: 23:00,0.45, !- Field 31
|
|
Until: 24:00,0.25, !- Field 33
|
|
For: AllOtherDays, !- Field 35
|
|
Until: 01:00,0.2, !- Field 36
|
|
Until: 04:00,0.15, !- Field 38
|
|
Until: 05:00,0.2, !- Field 40
|
|
Until: 06:00,0.25, !- Field 42
|
|
Until: 07:00,0.35, !- Field 44
|
|
Until: 08:00,0.60, !- Field 46
|
|
Until: 09:00,0.80, !- Field 48
|
|
Until: 10:00,0.55, !- Field 50
|
|
Until: 11:00,0.40, !- Field 52
|
|
Until: 12:00,0.30, !- Field 54
|
|
Until: 17:00,0.20, !- Field 56
|
|
Until: 18:00,0.25, !- Field 58
|
|
Until: 19:00,0.30, !- Field 60
|
|
Until: 22:00,0.40, !- Field 62
|
|
Until: 23:00,0.60, !- Field 64
|
|
Until: 24:00,0.35; !- Field 66
|
|
|
|
Schedule:Compact,
|
|
LaundryRoom_SWH_Sch, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 08:00,0.0, !- Field 3
|
|
Until: 16:00,1.0, !- Field 5
|
|
Until: 24:00,0.0; !- Field 7
|
|
|
|
Schedule:Compact,
|
|
Hours_of_operation, !- Name
|
|
On/Off, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Exterior_Lgt_ALWAYS_ON, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
ALWAYS_ON, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
ALWAYS_OFF, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.0; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
HVACOperationSchd, !- Name
|
|
On/Off, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
PlantOnSched, !- Name
|
|
On/Off, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
FAN_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
ReheatCoilAvailSched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
CoolingCoilAvailSched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
HTGSETP_SCH, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,21.; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
CLGSETP_SCH, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,24.; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
VacGuestRoom_HtgSP_Sch, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay WinterDesignDay, !- Field 2
|
|
Until: 24:00,21.111, !- Field 3
|
|
For: AllOtherDays, !- Field 5
|
|
Until: 24:00, !- Field 3
|
|
15.556; !- Field 4
|
|
|
|
Schedule:Compact,
|
|
VacGuestRoom_ClgSP_Sch, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay WinterDesignDay, !- Field 2
|
|
Until: 24:00,21.111, !- Field 3
|
|
For: AllOtherDays, !- Field 5
|
|
Until: 24:00, !- Field 3
|
|
26.667; !- Field 4
|
|
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Base_S_OccGuestRoom_HtgSP_Sch, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,21.11; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Base_S_OccGuestRoom_ClgSP_Sch, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,21.11; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Base_N_OccGuestRoom_HtgSP_Sch, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,21.11; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Base_N_OccGuestRoom_ClgSP_Sch, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,21.11; !- Field 3
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
OBCReset_S_OccGuestRoom_HtgSP_Sch_30min, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay WinterDesignDay, !- Field 2
|
|
Until: 24:00, !- Field 3
|
|
21.111, !- Field 4
|
|
For: AllOtherDays, !- Field 5
|
|
Until: 8:00, !- Field 6
|
|
21.111, !- Field 7
|
|
Until: 9:00, !- Field 8
|
|
18.889, !- Field 9
|
|
Until: 11:00, !- Field 10
|
|
21.111, !- Field 11
|
|
Until: 16:00, !- Field 12
|
|
18.889, !- Field 13
|
|
Until: 18:00, !- Field 14
|
|
21.111, !- Field 15
|
|
Until: 19:00, !- Field 16
|
|
18.889, !- Field 17
|
|
Until: 24:00, !- Field 18
|
|
21.111; !- Field 19
|
|
|
|
Schedule:Compact,
|
|
OBCReset_S_OccGuestRoom_ClgSP_Sch_30min, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay WinterDesignDay, !- Field 2
|
|
Until: 24:00, !- Field 3
|
|
21.111, !- Field 4
|
|
For: AllOtherDays, !- Field 5
|
|
Until: 8:00, !- Field 6
|
|
21.111, !- Field 7
|
|
Until: 9:00, !- Field 8
|
|
23.333, !- Field 9
|
|
Until: 11:00, !- Field 10
|
|
21.111, !- Field 11
|
|
Until: 16:00, !- Field 12
|
|
23.333, !- Field 13
|
|
Until: 18:00, !- Field 14
|
|
21.111, !- Field 15
|
|
Until: 19:00, !- Field 16
|
|
23.333, !- Field 17
|
|
Until: 24:00, !- Field 18
|
|
21.111; !- Field 19
|
|
|
|
Schedule:Compact,
|
|
OBCReset_N_OccGuestRoom_HtgSP_Sch_30min, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay WinterDesignDay, !- Field 2
|
|
Until: 24:00, !- Field 3
|
|
21.111, !- Field 4
|
|
For: AllOtherDays, !- Field 5
|
|
Until: 8:00, !- Field 6
|
|
21.111, !- Field 7
|
|
Until: 9:00, !- Field 8
|
|
18.889, !- Field 9
|
|
Until: 11:00, !- Field 10
|
|
21.111, !- Field 11
|
|
Until: 16:00, !- Field 12
|
|
18.889, !- Field 13
|
|
Until: 18:00, !- Field 14
|
|
21.111, !- Field 15
|
|
Until: 19:00, !- Field 16
|
|
18.889, !- Field 17
|
|
Until: 24:00, !- Field 18
|
|
21.111; !- Field 19
|
|
|
|
Schedule:Compact,
|
|
OBCReset_N_OccGuestRoom_ClgSP_Sch_30min, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay WinterDesignDay, !- Field 2
|
|
Until: 24:00, !- Field 3
|
|
21.111, !- Field 4
|
|
For: AllOtherDays, !- Field 5
|
|
Until: 8:00, !- Field 6
|
|
21.111, !- Field 7
|
|
Until: 9:00, !- Field 8
|
|
23.333, !- Field 9
|
|
Until: 11:00, !- Field 10
|
|
21.111, !- Field 11
|
|
Until: 16:00, !- Field 12
|
|
23.333, !- Field 13
|
|
Until: 18:00, !- Field 14
|
|
21.111, !- Field 15
|
|
Until: 19:00, !- Field 16
|
|
23.333, !- Field 17
|
|
Until: 24:00, !- Field 18
|
|
21.111; !- Field 19
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
OBCReset_S_OccGuestRoom_HtgSP_Sch_20min, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay WinterDesignDay, !- Field 2
|
|
Until: 24:00, !- Field 3
|
|
21.111, !- Field 4
|
|
For: AllOtherDays, !- Field 5
|
|
Until: 7:50, !- Field 6
|
|
21.111, !- Field 7
|
|
Until: 9:00, !- Field 8
|
|
18.889, !- Field 9
|
|
Until: 10:50, !- Field 10
|
|
21.111, !- Field 11
|
|
Until: 16:10, !- Field 12
|
|
18.889, !- Field 13
|
|
Until: 17:50, !- Field 14
|
|
21.111, !- Field 15
|
|
Until: 19:00, !- Field 16
|
|
18.889, !- Field 17
|
|
Until: 24:00, !- Field 18
|
|
21.111; !- Field 19
|
|
|
|
Schedule:Compact,
|
|
OBCReset_S_OccGuestRoom_ClgSP_Sch_20min, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay WinterDesignDay, !- Field 2
|
|
Until: 24:00, !- Field 3
|
|
21.111, !- Field 4
|
|
For: AllOtherDays, !- Field 5
|
|
Until: 7:50, !- Field 6
|
|
21.111, !- Field 7
|
|
Until: 9:00, !- Field 8
|
|
23.333, !- Field 9
|
|
Until: 10:50, !- Field 10
|
|
21.111, !- Field 11
|
|
Until: 16:10, !- Field 12
|
|
23.333, !- Field 13
|
|
Until: 17:50, !- Field 14
|
|
21.111, !- Field 15
|
|
Until: 19:00, !- Field 16
|
|
23.333, !- Field 17
|
|
Until: 24:00, !- Field 18
|
|
21.111; !- Field 19
|
|
|
|
Schedule:Compact,
|
|
OBCReset_N_OccGuestRoom_HtgSP_Sch_20min, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay WinterDesignDay, !- Field 2
|
|
Until: 24:00, !- Field 3
|
|
21.111, !- Field 4
|
|
For: AllOtherDays, !- Field 5
|
|
Until: 7:50, !- Field 6
|
|
21.111, !- Field 7
|
|
Until: 9:00, !- Field 8
|
|
18.889, !- Field 9
|
|
Until: 10:50, !- Field 10
|
|
21.111, !- Field 11
|
|
Until: 16:10, !- Field 12
|
|
18.889, !- Field 13
|
|
Until: 17:50, !- Field 14
|
|
21.111, !- Field 15
|
|
Until: 19:00, !- Field 16
|
|
18.889, !- Field 17
|
|
Until: 24:00, !- Field 18
|
|
21.111; !- Field 19
|
|
|
|
Schedule:Compact,
|
|
OBCReset_N_OccGuestRoom_ClgSP_Sch_20min, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay WinterDesignDay, !- Field 2
|
|
Until: 24:00, !- Field 3
|
|
21.111, !- Field 4
|
|
For: AllOtherDays, !- Field 5
|
|
Until: 7:50, !- Field 6
|
|
21.111, !- Field 7
|
|
Until: 9:00, !- Field 8
|
|
23.333, !- Field 9
|
|
Until: 10:50, !- Field 10
|
|
21.111, !- Field 11
|
|
Until: 16:10, !- Field 12
|
|
23.333, !- Field 13
|
|
Until: 17:50, !- Field 14
|
|
21.111, !- Field 15
|
|
Until: 19:00, !- Field 16
|
|
23.333, !- Field 17
|
|
Until: 24:00, !- Field 18
|
|
21.111; !- Field 19
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Occ_Guestroom_Vent_Ctrl_30min, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay WinterDesignDay, !- Field 2
|
|
Until: 24:00, !- Field 3
|
|
1, !- Field 4
|
|
For: AllOtherDays, !- Field 5
|
|
Until: 8:00, !- Field 6
|
|
1.0, !- Field 7
|
|
Until: 9:00, !- Field 8
|
|
0.0, !- Field 9
|
|
Until: 11:00, !- Field 10
|
|
1.0, !- Field 11
|
|
Until: 13:00, !- Field 12
|
|
0, !- Field 13
|
|
Until: 14:00, !- Field 14
|
|
1, !- Field 15
|
|
Until: 16:00, !- Field 16
|
|
0, !- Field 17
|
|
Until: 18:00, !- Field 18
|
|
1, !- Field 19
|
|
Until: 19:00, !- Field 20
|
|
0, !- Field 21
|
|
Until: 24:00, !- Field 22
|
|
1; !- Field 23
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Occ_Guestroom_Vent_Ctrl_20min, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay WinterDesignDay, !- Field 2
|
|
Until: 24:00, !- Field 3
|
|
1, !- Field 4
|
|
For: AllOtherDays, !- Field 5
|
|
Until: 7:50, !- Field 6
|
|
1.0, !- Field 7
|
|
Until: 9:00, !- Field 8
|
|
0.0, !- Field 9
|
|
Until: 10:50, !- Field 10
|
|
1.0, !- Field 11
|
|
Until: 13:00, !- Field 12
|
|
0, !- Field 13
|
|
Until: 14:00, !- Field 14
|
|
1, !- Field 15
|
|
Until: 16:10, !- Field 16
|
|
0, !- Field 17
|
|
Until: 17:50, !- Field 18
|
|
1, !- Field 19
|
|
Until: 19:00, !- Field 20
|
|
0, !- Field 21
|
|
Until: 24:00, !- Field 22
|
|
1; !- Field 23
|
|
|
|
|
|
Schedule:Compact,
|
|
VAC_GUESTROOM_VENTILATION_SCHEDULE, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay WinterDesignDay, !- Field 2
|
|
Until: 24:00, !- Field 3
|
|
1, !- Field 4
|
|
For: AllOtherDays, !- Field 5
|
|
Until: 15:00, !- Field 3
|
|
0, !- Field 4
|
|
Until: 16:00, !- Field 5
|
|
1, !- Field 6
|
|
Until: 24:00, !- Field 7
|
|
0; !- Field 8
|
|
|
|
Schedule:Compact,
|
|
Off During Unoccupied Period, !- Name
|
|
On/Off, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 8:00,0, !- Field 3
|
|
Until: 18:00,1, !- Field 5
|
|
Until: 24:00,0; !- Field 7
|
|
|
|
Schedule:Compact,
|
|
Humidity Setpoint Schedule, !- Name
|
|
Humidity, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 24:00,50, !- Field 3
|
|
For: Saturday WinterDesignDay, !- Field 5
|
|
Until: 24:00,50, !- Field 6
|
|
For: Sunday Holidays AllOtherDays, !- Field 8
|
|
Until: 24:00,50; !- Field 9
|
|
|
|
Schedule:Compact,
|
|
MinRelHumSetSch, !- Name
|
|
Humidity, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,30; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
MaxRelHumSetSch, !- Name
|
|
Humidity, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
MinOA_MotorizedDamper_Sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
MinOA_Sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Dual Zone Control Type Sched, !- Name
|
|
Control Type, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,4; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Seasonal-Reset-Supply-Air-Temp-Sch, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 3/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,13.0, !- Field 3
|
|
Through: 9/30, !- Field 5
|
|
For: AllDays, !- Field 6
|
|
Until: 24:00,13.0, !- Field 7
|
|
Through: 12/31, !- Field 9
|
|
For: AllDays, !- Field 10
|
|
Until: 24:00,13.0; !- Field 11
|
|
|
|
Schedule:Compact,
|
|
CW-Loop-Temp-Schedule, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,6.7; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
HW-Loop-Temp-Schedule, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Cool-Supply-Air-Temp-Sch,!- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,12.8; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Heating-Supply-Air-Temp-Sch, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,16.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
ACTIVITY_SCH, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,120.; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
WORK_EFF_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
AIR_VELO_SCH, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
CLOTHING_SCH, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 04/30, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0, !- Field 3
|
|
Through: 09/30, !- Field 5
|
|
For: AllDays, !- Field 6
|
|
Until: 24:00,0.5, !- Field 7
|
|
Through: 12/31, !- Field 9
|
|
For: AllDays, !- Field 10
|
|
Until: 24:00,1.0; !- Field 11
|
|
|
|
Schedule:Compact,
|
|
SHADING_SCH, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.0; !- Field 3
|
|
|
|
|
|
Schedule:Compact,
|
|
Room_1_Flr_3 Water Equipment Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_1_Flr_3 Water Equipment Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Room_1_Flr_3 Water Equipment Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.00; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_1_Flr_3 Water Equipment Hot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_2_Flr_3 Water Equipment Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_2_Flr_3 Water Equipment Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Room_2_Flr_3 Water Equipment Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.00; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_2_Flr_3 Water Equipment Hot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_3_Mult19_Flr_3 Water Equipment Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_3_Mult19_Flr_3 Water Equipment Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Room_3_Mult19_Flr_3 Water Equipment Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.00; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_3_Mult19_Flr_3 Water Equipment Hot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_4_Mult19_Flr_3 Water Equipment Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_4_Mult19_Flr_3 Water Equipment Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Room_4_Mult19_Flr_3 Water Equipment Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.00; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_4_Mult19_Flr_3 Water Equipment Hot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_5_Flr_3 Water Equipment Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_5_Flr_3 Water Equipment Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Room_5_Flr_3 Water Equipment Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.00; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_5_Flr_3 Water Equipment Hot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_6_Flr_3 Water Equipment Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_6_Flr_3 Water Equipment Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Room_6_Flr_3 Water Equipment Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.00; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_6_Flr_3 Water Equipment Hot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_1_Flr_6 Water Equipment Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_1_Flr_6 Water Equipment Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Room_1_Flr_6 Water Equipment Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.00; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_1_Flr_6 Water Equipment Hot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_2_Flr_6 Water Equipment Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_2_Flr_6 Water Equipment Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Room_2_Flr_6 Water Equipment Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.00; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_2_Flr_6 Water Equipment Hot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_3_Mult9_Flr_6 Water Equipment Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_3_Mult9_Flr_6 Water Equipment Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Room_3_Mult9_Flr_6 Water Equipment Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.00; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Room_3_Mult9_Flr_6 Water Equipment Hot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Kitchen_Flr_6 Water Equipment Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Kitchen_Flr_6 Water Equipment Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Kitchen_Flr_6 Water Equipment Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Kitchen_Flr_6 Water Equipment Hot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Kitchen_Flr_6_Case:1_WALKINFREEZER_CaseDefrost2aDaySched, !- Name
|
|
On/Off, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For:AllDays, !- Field 2
|
|
Interpolate:Average, !- Field 3
|
|
Until: 11:00,0, !- Field 4
|
|
Until: 11:20,1, !- Field 6
|
|
Until: 23:00,0, !- Field 8
|
|
Until: 23:20,1, !- Field 10
|
|
Until: 24:00,0; !- Field 12
|
|
|
|
Schedule:Compact,
|
|
Kitchen_Flr_6_Case:1_WALKINFREEZER_CaseDripDown2aDaySched, !- Name
|
|
On/Off, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For:AllDays, !- Field 2
|
|
Interpolate:Average, !- Field 3
|
|
Until: 11:00,0, !- Field 4
|
|
Until: 11:30,1, !- Field 6
|
|
Until: 23:00,0, !- Field 8
|
|
Until: 23:30,1, !- Field 10
|
|
Until: 24:00,0; !- Field 12
|
|
|
|
Schedule:Compact,
|
|
Kitchen_Flr_6_Case:1_WALKINFREEZER_WalkInStockingSched, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Tuesday Friday, !- Field 2
|
|
Until: 4:00,0.0, !- Field 3
|
|
Until: 5:00,725.0, !- Field 5
|
|
Until: 6:00,417.0, !- Field 7
|
|
Until: 7:00,290.0, !- Field 9
|
|
Until: 24:00,0.0, !- Field 11
|
|
For: AllOtherDays, !- Field 13
|
|
Until: 4:00,0.0, !- Field 14
|
|
Until: 5:00,125.0, !- Field 16
|
|
Until: 6:00,117.0, !- Field 18
|
|
Until: 7:00,90.0, !- Field 20
|
|
Until: 19:00,0.0, !- Field 22
|
|
Until: 20:00,125.0, !- Field 24
|
|
Until: 21:00,117.0, !- Field 26
|
|
Until: 22:00,90.0, !- Field 28
|
|
Until: 24:00,0.0; !- Field 30
|
|
|
|
Schedule:Compact,
|
|
Kitchen_Flr_6_Case:1_WALKINFREEZER_CaseCreditReduxSched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For:AllDays, !- Field 2
|
|
Interpolate:No, !- Field 3
|
|
Until: 7:00,0.2, !- Field 4
|
|
Until: 21:00,0.4, !- Field 6
|
|
Until: 24:00,0.2; !- Field 8
|
|
|
|
Schedule:Compact,
|
|
Kitchen_Flr_6_Case:2_SELFCONTAINEDDISPLAYCASE_CaseStockingSched, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For:AllDays, !- Field 2
|
|
Until: 6:00,0.0, !- Field 3
|
|
Until: 7:00,50.0, !- Field 5
|
|
Until: 9:00,70.0, !- Field 7
|
|
Until: 10:00,80.0, !- Field 9
|
|
Until: 11:00,70.0, !- Field 11
|
|
Until: 13:00,50.0, !- Field 13
|
|
Until: 14:00,80.0, !- Field 15
|
|
Until: 15:00,90.0, !- Field 17
|
|
Until: 16:00,80.0, !- Field 19
|
|
Until: 24:00,0.0; !- Field 21
|
|
|
|
Schedule:Compact,
|
|
FLR_3_DOAS_OAminOAFracSchedule, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0000; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
SWHSys1-Loop-Temp-Schedule, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
|
|
Schedule:Compact,
|
|
SWHSys1 Water Heater Setpoint Temperature Schedule Name, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
SWHSys1 Water Heater Ambient Temperature Schedule Name, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,22.0; !- Field 3
|
|
|
|
|
|
Schedule:Constant,
|
|
VAV WITH REHEAT Max OA Fraction, !- Name
|
|
, !- Schedule Type Limits Name
|
|
1.0; !- Hourly Value
|
|
|
|
|
|
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: MATERIAL ===========
|
|
!- =========== ALL OBJECTS IN CLASS: MATERIAL:NOMASS ===========
|
|
|
|
|
|
!
|
|
!- =========== ALL OBJECTS IN CLASS: MATERIAL:REGULAR ===========
|
|
|
|
Material,
|
|
Std Wood 6inch, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.15, !- Thickness {m}
|
|
0.12, !- Conductivity {W/m-K}
|
|
540.0000, !- Density {kg/m3}
|
|
1210, !- Specific Heat {J/kg-K}
|
|
0.9000000, !- Thermal Absorptance
|
|
0.7000000, !- Solar Absorptance
|
|
0.7000000; !- Visible Absorptance
|
|
|
|
Material,
|
|
AC02 Acoustic Ceiling, !- Name
|
|
MediumSmooth, !- Roughness
|
|
1.2700000E-02, !- Thickness {m}
|
|
5.7000000E-02, !- Conductivity {W/m-K}
|
|
288.0000, !- Density {kg/m3}
|
|
1339.000, !- Specific Heat {J/kg-K}
|
|
0.9000000, !- Thermal Absorptance
|
|
0.7000000, !- Solar Absorptance
|
|
0.2000000; !- Visible Absorptance
|
|
|
|
Material,
|
|
F07 25mm stucco, !- Name
|
|
Smooth, !- Roughness
|
|
0.0254, !- Thickness {m}
|
|
0.72, !- Conductivity {W/m-K}
|
|
1856, !- Density {kg/m3}
|
|
840, !- Specific Heat {J/kg-K}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
Material,
|
|
F08 Metal surface, !- Name
|
|
Smooth, !- Roughness
|
|
0.0008, !- Thickness {m}
|
|
45.28, !- Conductivity {W/m-K}
|
|
7824, !- Density {kg/m3}
|
|
500; !- Specific Heat {J/kg-K}
|
|
|
|
Material,
|
|
F08 Metal roof surface, !- Name
|
|
Smooth, !- Roughness
|
|
0.0008, !- Thickness {m}
|
|
45.28, !- Conductivity {W/m-K}
|
|
7824, !- Density {kg/m3}
|
|
500, !- Specific Heat {J/kg-K}
|
|
0.9, !- Absorptance:Thermal
|
|
0.77; !- Absorptance:Solar
|
|
|
|
Material,
|
|
F12 Asphalt shingles, !- Name
|
|
VeryRough, !- Roughness
|
|
0.0032, !- Thickness {m}
|
|
0.04, !- Conductivity {W/m-K}
|
|
1120, !- Density {kg/m3}
|
|
1260, !- Specific Heat {J/kg-K}
|
|
0.9, !- Absorptance:Thermal
|
|
0.77; !- Absorptance:Solar
|
|
|
|
Material,
|
|
F13 Built-up roofing, !- Name
|
|
Rough, !- Roughness
|
|
0.0095, !- Thickness {m}
|
|
0.16, !- Conductivity {W/m-K}
|
|
1120, !- Density {kg/m3}
|
|
1460, !- Specific Heat {J/kg-K}
|
|
0.9, !- Absorptance:Thermal
|
|
0.77; !- Absorptance:Solar
|
|
|
|
Material,
|
|
G01 13mm gypsum board, !- Name
|
|
Smooth, !- Roughness
|
|
0.0127, !- Thickness {m}
|
|
0.1600, !- Conductivity {W/m-K}
|
|
800.0000, !- Density {kg/m3}
|
|
1090.0000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Absorptance:Thermal
|
|
0.7000, !- Absorptance:Solar
|
|
0.5000; !- Absorptance:Visible
|
|
|
|
Material,
|
|
G01 16mm gypsum board, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0159, !- Thickness {m}
|
|
0.16, !- Conductivity {W/m-K}
|
|
800, !- Density {kg/m3}
|
|
1090; !- Specific Heat {J/kg-K}
|
|
|
|
Material,
|
|
G02 16mm plywood, !- Name
|
|
Smooth, !- Roughness
|
|
0.0159, !- Thickness {m}
|
|
0.12, !- Conductivity {W/m-K}
|
|
544, !- Density {kg/m3}
|
|
1210; !- Specific Heat {J/kg-K}
|
|
|
|
Material,
|
|
M14 150mm heavyweight concrete roof, !- Name
|
|
MediumRough, !- Roughness
|
|
0.1524, !- Thickness {m}
|
|
2.31, !- Conductivity {W/m-K}
|
|
2322, !- Density {kg/m3}
|
|
832; !- Specific Heat {J/kg-K}
|
|
|
|
|
|
Material,
|
|
100mm Normalweight concrete wall, !- Name - based on 90.1-2004 Appendix-Table A3-1B
|
|
MediumRough, !- Roughness
|
|
0.1016, !- Thickness {m}
|
|
2.31, !- Conductivity {W/m-K}
|
|
2322, !- Density {kg/m3}
|
|
832; !- Specific Heat {J/kg-K}
|
|
|
|
|
|
Material,
|
|
200mm Normalweight concrete wall, !- Name - based on 90.1-2004 Appendix-Table A3-1B
|
|
MediumRough, !- Roughness
|
|
0.2032, !- Thickness {m}
|
|
2.31, !- Conductivity {W/m-K}
|
|
2322, !- Density {kg/m3}
|
|
832; !- Specific Heat {J/kg-K}
|
|
|
|
Material,
|
|
100mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B
|
|
MediumRough, !- Roughness
|
|
0.1016, !- Thickness {m}
|
|
2.31, !- Conductivity {W/m-K}
|
|
2322, !- Density {kg/m3}
|
|
832; !- Specific Heat {J/kg-K}
|
|
|
|
Material,
|
|
150mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B
|
|
MediumRough, !- Roughness
|
|
0.1524, !- Thickness {m}
|
|
2.31, !- Conductivity {W/m-K}
|
|
2322, !- Density {kg/m3}
|
|
832; !- Specific Heat {J/kg-K}
|
|
|
|
Material,
|
|
200mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B
|
|
MediumRough, !- Roughness
|
|
0.2032, !- Thickness {m}
|
|
2.31, !- Conductivity {W/m-K}
|
|
2322, !- Density {kg/m3}
|
|
832; !- Specific Heat {J/kg-K}
|
|
|
|
Material,
|
|
M10 200mm concrete block wall, !- Name
|
|
MediumRough, !- Roughness
|
|
0.2032, !- Thickness {m}
|
|
0.72, !- Conductivity {W/m-K}
|
|
800, !- Density {kg/m3}
|
|
832; !- Specific Heat {J/kg-K}
|
|
|
|
Material,
|
|
M10 200mm concrete block basement wall, !- Name
|
|
MediumRough, !- Roughness
|
|
0.2032, !- Thickness {m}
|
|
1.326, !- Conductivity {W/m-K}
|
|
1842, !- Density {kg/m3}
|
|
912; !- Specific Heat {J/kg-K}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Material:NoMass,
|
|
CP02 CARPET PAD, !- Name
|
|
VeryRough, !- Roughness
|
|
0.21648, !- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.8; !- Visible Absorptance
|
|
|
|
|
|
Material:NoMass,
|
|
Air_Wall_Material, !- Name
|
|
Rough, !- Roughness
|
|
0.2079491, !- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7; !- Solar Absorptance
|
|
|
|
|
|
Material:NoMass,
|
|
Nonres_Roof_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
5.30668495131472,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Absorptance:Thermal
|
|
0.7, !- Absorptance:Solar
|
|
0.7; !- Absorptance:Visible
|
|
|
|
Material:NoMass,
|
|
Res_Roof_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0299387330245182,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
Semiheated_Roof_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0299387330245182,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
|
|
|
|
Material:NoMass,
|
|
Nonres_Exterior_Wall_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
1.88434339518544,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
Res_Exterior_Wall_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
2.16339123820601,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
Semiheated_Exterior_Wall_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0299387330245182,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
|
|
|
|
Material:NoMass,
|
|
Nonres_Floor_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
|
|
4.99962881861943,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
Res_Floor_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
|
|
0.0299387330245182,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
Semiheated_Floor_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
|
|
0.0299387330245182,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Material:NoMass,
|
|
Std Opaque Door Panel, !- Name
|
|
MediumRough, !- Roughness
|
|
0.123456790123457, !- (corresponds to default RSI-0.12327 or R-0.7) Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CONSTRUCTION ===========
|
|
|
|
Construction,
|
|
InteriorFurnishings, !- Name
|
|
Std Wood 6inch; !- Outside Layer
|
|
|
|
Construction,
|
|
Air_Wall, !- Name
|
|
Air_Wall_Material; !- Outside Layer
|
|
|
|
Construction,
|
|
DropCeiling, !- Name
|
|
AC02 Acoustic Ceiling; !- Outside Layer
|
|
|
|
Construction,
|
|
OpaqueDoor, !- Name
|
|
Std Opaque Door Panel; !- Outside Layer
|
|
|
|
Construction,
|
|
AtticRoofDeck, !- Name
|
|
F12 Asphalt shingles, !- Outside Layer
|
|
G02 16mm plywood; !- Layer 2
|
|
|
|
Construction,
|
|
int_wall, !- Name
|
|
G01 13mm gypsum board, !- Outside Layer
|
|
G01 13mm gypsum board; !- Layer 2
|
|
|
|
Construction,
|
|
ext_slab_8in_with_carpet,!- Name
|
|
200mm Normalweight concrete floor, !- Outside Layer
|
|
CP02 CARPET PAD; !- Layer 2
|
|
|
|
Construction,
|
|
ext_slab_8in, !- Name
|
|
200mm Normalweight concrete floor; !- Outside Layer
|
|
|
|
Construction,
|
|
ext_slab_6in_with_carpet,!- Name
|
|
150mm Normalweight concrete floor, !- Outside Layer
|
|
CP02 CARPET PAD; !- Layer 2
|
|
|
|
Construction,
|
|
ext_slab_6in, !- Name
|
|
150mm Normalweight concrete floor; !- Outside Layer
|
|
|
|
Construction,
|
|
int_slab_floor, !- Name
|
|
100mm Normalweight concrete floor, !- Outside Layer
|
|
CP02 CARPET PAD; !- Layer 2
|
|
|
|
Construction,
|
|
int_slab_ceiling, !- Name
|
|
CP02 CARPET PAD, !- Outside Layer
|
|
100mm Normalweight concrete floor; !- Layer 2
|
|
|
|
Construction,
|
|
basement_wall, !- Name
|
|
M10 200mm concrete block basement wall; !- Outside Layer
|
|
|
|
Construction,
|
|
int_wood_floor, !- Name
|
|
AC02 Acoustic Ceiling, !- Outside Layer
|
|
G02 16mm plywood, !- Layer 2
|
|
CP02 CARPET PAD; !- Layer 3
|
|
|
|
Construction,
|
|
ext_soffit_floor, !- Name
|
|
G02 16mm plywood; !- Outside Layer
|
|
|
|
Construction,
|
|
nonres_roof, !- Name
|
|
F13 Built-up roofing, !- Outside Layer
|
|
Nonres_Roof_Insulation, !- Layer #2
|
|
F08 Metal surface; !- Layer #3
|
|
|
|
|
|
Construction,
|
|
res_roof, !- Name
|
|
F13 Built-up roofing, !- Outside Layer
|
|
Res_Roof_Insulation, !- Layer #2
|
|
F08 Metal surface; !- Layer #3
|
|
|
|
|
|
Construction,
|
|
semiheated_roof, !- Name
|
|
F13 Built-up roofing, !- Outside Layer
|
|
Semiheated_Roof_Insulation, !- Layer #2
|
|
F08 Metal surface; !- Layer #3
|
|
|
|
|
|
|
|
|
|
Construction,
|
|
nonres_ext_wall, !- Name
|
|
200mm Normalweight concrete wall, !- Outside Layer
|
|
Nonres_Exterior_Wall_Insulation, !- Layer #2
|
|
G01 13mm gypsum board; !- Layer #3
|
|
|
|
|
|
Construction,
|
|
res_ext_wall, !- Name
|
|
200mm Normalweight concrete wall, !- Outside Layer
|
|
Res_Exterior_Wall_Insulation, !- Layer #2
|
|
G01 13mm gypsum board; !- Layer #3
|
|
|
|
|
|
Construction,
|
|
semiheated_ext_wall, !- Name
|
|
200mm Normalweight concrete wall, !- Outside Layer
|
|
Semiheated_Exterior_Wall_Insulation, !- Layer #2
|
|
G01 13mm gypsum board; !- Layer #3
|
|
|
|
|
|
Construction,
|
|
nonres_floor, !- Name
|
|
Nonres_Floor_Insulation, !- Outside Layer
|
|
100mm Normalweight concrete floor, !- Layer #1
|
|
CP02 CARPET PAD; !- Layer #2
|
|
|
|
|
|
Construction,
|
|
res_floor, !- Name
|
|
Res_Floor_Insulation, !- Outside Layer
|
|
100mm Normalweight concrete floor, !- Layer #1
|
|
CP02 CARPET PAD; !- Layer #2
|
|
|
|
|
|
Construction,
|
|
semiheated_floor, !- Name
|
|
Semiheated_Floor_Insulation, !- Outside Layer
|
|
100mm Normalweight concrete floor, !- Layer #1
|
|
CP02 CARPET PAD; !- Layer #2
|
|
|
|
|
|
Construction,
|
|
nonres_floor_ceiling, !- Name - reverse ordered layers for nonres_floor
|
|
CP02 CARPET PAD, !- Outside Layer
|
|
100mm Normalweight concrete floor, !- Layer #1
|
|
Nonres_Floor_Insulation; !- Layer #2
|
|
|
|
Construction,
|
|
res_floor_ceiling, !- Name - reverse ordered layers for res_floor
|
|
CP02 CARPET PAD, !- Outside Layer
|
|
100mm Normalweight concrete floor, !- Layer #1
|
|
Res_Floor_Insulation; !- Layer #2
|
|
|
|
Construction,
|
|
semiheated_floor_ceiling, !- Name - reverse ordered layers for semiheated_floor
|
|
CP02 CARPET PAD, !- Outside Layer
|
|
100mm Normalweight concrete floor, !- Layer #1
|
|
Semiheated_Floor_Insulation; !- Layer #2
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Construction,
|
|
basement_floor, !- Name
|
|
M10 200mm concrete block basement wall, !- Outside Layer
|
|
CP02 CARPET PAD; !- Layer 2
|
|
!- =========== ALL OBJECTS IN CLASS: WINDOWMATERIAL:SIMPLEGLAZINGSYSTEM ===========
|
|
|
|
WindowMaterial:SimpleGlazingSystem,
|
|
Glazing Layer, !- Name
|
|
1.9306084, !- U-Factor {W/m2-K}
|
|
0.38, !- Solar Heat Gain Coefficient
|
|
0.418; !- Visible Transmittance
|
|
|
|
Construction,
|
|
NonresWindow_U_0.34_SHGC_0.38, !- Name
|
|
Glazing Layer; !- Outside Layer
|
|
WindowMaterial:SimpleGlazingSystem,
|
|
Residential Window Glazing Layer, !- Name
|
|
1.987391, !- U-Factor {W/m2-K}
|
|
0.38, !- Solar Heat Gain Coefficient
|
|
0.418; !- Visible Transmittance
|
|
Construction,
|
|
ResWindow_U_0.35_SHGC_0.38, !- Name
|
|
Residential Window Glazing Layer; !- Outside Layer
|
|
!- =========== ALL OBJECTS IN CLASS: GLOBALGEOMETRYRULES ===========
|
|
|
|
GlobalGeometryRules,
|
|
UpperLeftCorner, !- Starting Vertex Position
|
|
Counterclockwise, !- Vertex Entry Direction
|
|
Relative, !- Coordinate System
|
|
Relative; !- Daylighting Reference Point Coordinate System
|
|
|
|
|
|
Construction:CfactorUndergroundWall,
|
|
Basement_Wall_North_Cfactor, !- Name
|
|
0.522376, !- C-Factor
|
|
2.439; !- Height
|
|
|
|
Construction:CfactorUndergroundWall,
|
|
Basement_Wall_East_Cfactor, !- Name
|
|
0.522376, !- C-Factor
|
|
2.439; !- Height
|
|
|
|
Construction:CfactorUndergroundWall,
|
|
Basement_Wall_South_Cfactor, !- Name
|
|
0.522376, !- C-Factor
|
|
2.439; !- Height
|
|
|
|
Construction:CfactorUndergroundWall,
|
|
Basement_Wall_West_Cfactor, !- Name
|
|
0.522376, !- C-Factor
|
|
2.439; !- Height
|
|
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ZONE ===========
|
|
|
|
Zone,
|
|
Basement, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
4826.4064, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Retail_1_Flr_1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
265.7636, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Retail_2_Flr_1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
307.7552, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Mech_Flr_1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
650.7972, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Storage_Flr_1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
375.4741, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Laundry_Flr_1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
309.2236, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Cafe_Flr_1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
748.3463, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Lobby_Flr_1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
5183.5567, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Room_1_Flr_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
4.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
118.9391, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Room_2_Flr_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
4.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
118.9252, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Room_3_Mult19_Flr_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
76.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
74.7487, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Room_4_Mult19_Flr_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
76.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
74.7691, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Room_5_Flr_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
4.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
118.9391, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Room_6_Flr_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
4.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
118.9252, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Corridor_Flr_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
4.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
1186.9055, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Room_1_Flr_6, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
118.9391, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Room_2_Flr_6, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
118.9252, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Room_3_Mult9_Flr_6, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
9.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
74.7691, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Banquet_Flr_6, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
1010.8919, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Dining_Flr_6, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
1010.8919, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Kitchen_Flr_6, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
314.8720, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Corridor_Flr_6, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
1256.1561, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
!- =========== ALL OBJECTS IN CLASS: BUILDINGSURFACE:DETAILED ===========
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Basement_Wall_North_Cfactor, !- Construction Name
|
|
Basement, !- Zone Name
|
|
GroundFCfactorMethod, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
86.5630,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
86.5630,22.8600,-2.4390, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,22.8600,-2.4390, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,22.8600,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
Basement_Wall_East_Cfactor, !- Construction Name
|
|
Basement, !- Zone Name
|
|
GroundFCfactorMethod, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
86.5630,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
86.5630,0.0000,-2.4390, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.5630,22.8600,-2.4390, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.5630,22.8600,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Basement_Wall_South_Cfactor, !- Construction Name
|
|
Basement, !- Zone Name
|
|
GroundFCfactorMethod, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,-2.4390, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.5630,0.0000,-2.4390, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.5630,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
Basement_Wall_West_Cfactor, !- Construction Name
|
|
Basement, !- Zone Name
|
|
GroundFCfactorMethod, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,22.8600,-2.4390, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,-2.4390, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
basement_floor, !- Construction Name
|
|
Basement, !- Zone Name
|
|
Adiabatic, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
86.5630,22.8600,-2.4390, !- X,Y,Z ==> Vertex 1 {m}
|
|
86.5630,0.0000,-2.4390, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,-2.4390, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,22.8600,-2.4390; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Ceiling_1, !- Name
|
|
Ceiling, !- Surface Type
|
|
nonres_floor_ceiling, !- Construction Name
|
|
Basement, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Retail_1_Flr_1_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,5.7910,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.5820,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.5820,5.7910,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Ceiling_2, !- Name
|
|
Ceiling, !- Surface Type
|
|
nonres_floor_ceiling, !- Construction Name
|
|
Basement, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Retail_2_Flr_1_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,12.4970,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,5.7910,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.5820,5.7910,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.5820,12.4970,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Ceiling_3, !- Name
|
|
Ceiling, !- Surface Type
|
|
nonres_floor_ceiling, !- Construction Name
|
|
Basement, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Mech_Flr_1_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
53.9500,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
53.9500,12.4970,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
69.7990,12.4970,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
69.7990,22.8600,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Ceiling_4, !- Name
|
|
Ceiling, !- Surface Type
|
|
nonres_floor_ceiling, !- Construction Name
|
|
Basement, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Storage_Flr_1_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
69.7990,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
69.7990,12.4970,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
78.9430,12.4970,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
78.9430,22.8600,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Ceiling_5, !- Name
|
|
Ceiling, !- Surface Type
|
|
nonres_floor_ceiling, !- Construction Name
|
|
Basement, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Laundry_Flr_1_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
81.9910,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
81.9910,5.7910,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.5630,5.7910,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.5630,22.8600,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Ceiling_6, !- Name
|
|
Ceiling, !- Surface Type
|
|
nonres_floor_ceiling, !- Construction Name
|
|
Basement, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Cafe_Flr_1_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
53.9500,5.7910,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
53.9500,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.5630,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.5630,5.7910,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Ceiling_7, !- Name
|
|
Ceiling, !- Surface Type
|
|
nonres_floor_ceiling, !- Construction Name
|
|
Basement, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lobby_Flr_1_Floor_1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
11.5820,12.4970,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
11.5820,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
53.9500,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
53.9500,22.8600,0.0000, !- X,Y,Z ==> Vertex 4 {m}
|
|
0.0000,22.8600,0.0000, !- X,Y,Z ==> Vertex 5 {m}
|
|
0.0000,12.4970,0.0000; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Ceiling_8, !- Name
|
|
Ceiling, !- Surface Type
|
|
nonres_floor_ceiling, !- Construction Name
|
|
Basement, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lobby_Flr_1_Floor_2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
53.9500,5.7910,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
81.9910,5.7910,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
81.9910,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
78.9430,22.8600,0.0000, !- X,Y,Z ==> Vertex 4 {m}
|
|
78.9430,12.4970,0.0000, !- X,Y,Z ==> Vertex 5 {m}
|
|
53.9500,12.4970,0.0000; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Retail_1_Flr_1_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Retail_1_Flr_1, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.5820,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.5820,0.0000,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Retail_1_Flr_1_Wall_West,!- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Retail_1_Flr_1, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,5.7910,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,5.7910,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Retail_1_Flr_1_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
nonres_floor, !- Construction Name
|
|
Retail_1_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Basement_Ceiling_1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
11.5820,5.7910,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
11.5820,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,5.7910,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Retail_1_Flr_1_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Retail_1_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Retail_2_Flr_1_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
11.5820,5.7910,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
11.5820,5.7910,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,5.7910,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,5.7910,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Retail_1_Flr_1_Wall_East,!- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Retail_1_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lobby_Flr_1_Wall_2_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
11.5820,0.0000,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
11.5820,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.5820,5.7910,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.5820,5.7910,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Retail_1_Flr_1_Ceiling, !- Name
|
|
Roof, !- Surface Type
|
|
nonres_roof, !- Construction Name
|
|
Retail_1_Flr_1, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,5.7910,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.5820,0.0000,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.5820,5.7910,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Retail_2_Flr_1_Wall_West,!- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Retail_2_Flr_1, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,12.4970,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,12.4970,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,5.7910,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,5.7910,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Retail_2_Flr_1_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Retail_2_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Retail_1_Flr_1_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,5.7910,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,5.7910,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.5820,5.7910,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.5820,5.7910,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Retail_2_Flr_1_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
nonres_floor, !- Construction Name
|
|
Retail_2_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Basement_Ceiling_2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
11.5820,12.4970,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
11.5820,5.7910,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,5.7910,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,12.4970,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Retail_2_Flr_1_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Retail_2_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lobby_Flr_1_Wall_2_South,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
11.5820,12.4970,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
11.5820,12.4970,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,12.4970,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,12.4970,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Retail_2_Flr_1_Wall_East,!- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Retail_2_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lobby_Flr_1_Wall_3_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
11.5820,5.7910,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
11.5820,5.7910,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.5820,12.4970,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.5820,12.4970,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Retail_2_Flr_1_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
nonres_floor_ceiling, !- Construction Name
|
|
Retail_2_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Retail_2_Flr_1_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,12.4970,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,5.7910,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.5820,5.7910,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.5820,12.4970,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Mech_Flr_1_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Mech_Flr_1, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
69.7990,22.8600,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
69.7990,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
53.9500,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
53.9500,22.8600,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Mech_Flr_1_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
nonres_floor, !- Construction Name
|
|
Mech_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Basement_Ceiling_3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
69.7990,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
69.7990,12.4970,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
53.9500,12.4970,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
53.9500,22.8600,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Mech_Flr_1_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Mech_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Storage_Flr_1_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
69.7990,12.4970,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
69.7990,12.4970,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
69.7990,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
69.7990,22.8600,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Mech_Flr_1_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Mech_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lobby_Flr_1_Wall_3_North,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
53.9500,12.4970,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
53.9500,12.4970,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
69.7990,12.4970,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
69.7990,12.4970,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Mech_Flr_1_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Mech_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lobby_Flr_1_Wall_1_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
53.9500,22.8600,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
53.9500,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
53.9500,12.4970,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
53.9500,12.4970,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Mech_Flr_1_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
nonres_floor_ceiling, !- Construction Name
|
|
Mech_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Mech_Flr_1_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
53.9500,22.8600,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
53.9500,12.4970,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
69.7990,12.4970,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
69.7990,22.8600,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Storage_Flr_1_Wall_North,!- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Storage_Flr_1, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
78.9430,22.8600,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
78.9430,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
69.7990,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
69.7990,22.8600,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Storage_Flr_1_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
nonres_floor, !- Construction Name
|
|
Storage_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Basement_Ceiling_4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
78.9430,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
78.9430,12.4970,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
69.7990,12.4970,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
69.7990,22.8600,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Storage_Flr_1_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Storage_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lobby_Flr_1_Wall_4_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
78.9430,12.4970,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
78.9430,12.4970,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
78.9430,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
78.9430,22.8600,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Storage_Flr_1_Wall_South,!- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Storage_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lobby_Flr_1_Wall_4_North,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
69.7990,12.4970,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
69.7990,12.4970,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
78.9430,12.4970,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
78.9430,12.4970,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Storage_Flr_1_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Storage_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Mech_Flr_1_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
69.7990,22.8600,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
69.7990,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
69.7990,12.4970,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
69.7990,12.4970,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Storage_Flr_1_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
nonres_floor_ceiling, !- Construction Name
|
|
Storage_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Storage_Flr_1_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
69.7990,22.8600,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
69.7990,12.4970,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
78.9430,12.4970,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
78.9430,22.8600,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Laundry_Flr_1_Wall_North,!- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Laundry_Flr_1, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
86.5630,22.8600,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
86.5630,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
81.9910,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
81.9910,22.8600,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Laundry_Flr_1_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Laundry_Flr_1, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
86.5630,5.7910,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
86.5630,5.7910,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.5630,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.5630,22.8600,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Laundry_Flr_1_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
nonres_floor, !- Construction Name
|
|
Laundry_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Basement_Ceiling_5, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
86.5630,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
86.5630,5.7910,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
81.9910,5.7910,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
81.9910,22.8600,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Laundry_Flr_1_Wall_South,!- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Laundry_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Cafe_Flr_1_Wall_2_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
81.9910,5.7910,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
81.9910,5.7910,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.5630,5.7910,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.5630,5.7910,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Laundry_Flr_1_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Laundry_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lobby_Flr_1_Wall_3_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
81.9910,22.8600,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
81.9910,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
81.9910,5.7910,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
81.9910,5.7910,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Laundry_Flr_1_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
nonres_floor_ceiling, !- Construction Name
|
|
Laundry_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Laundry_Flr_1_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
81.9910,22.8600,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
81.9910,5.7910,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.5630,5.7910,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.5630,22.8600,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Cafe_Flr_1_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Cafe_Flr_1, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
86.5630,0.0000,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
86.5630,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.5630,5.7910,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.5630,5.7910,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Cafe_Flr_1_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Cafe_Flr_1, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
53.9500,0.0000,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
53.9500,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.5630,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.5630,0.0000,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Cafe_Flr_1_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
nonres_floor, !- Construction Name
|
|
Cafe_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Basement_Ceiling_6, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
86.5630,5.7910,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
86.5630,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
53.9500,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
53.9500,5.7910,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Cafe_Flr_1_Wall_1_North, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Cafe_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lobby_Flr_1_Wall_3_South,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
81.9910,5.7910,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
81.9910,5.7910,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
53.9500,5.7910,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
53.9500,5.7910,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Cafe_Flr_1_Wall_2_North, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Cafe_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Laundry_Flr_1_Wall_South,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
86.5630,5.7910,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
86.5630,5.7910,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
81.9910,5.7910,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
81.9910,5.7910,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Cafe_Flr_1_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Cafe_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lobby_Flr_1_Wall_2_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
53.9500,5.7910,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
53.9500,5.7910,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
53.9500,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
53.9500,0.0000,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Cafe_Flr_1_Ceiling, !- Name
|
|
Roof, !- Surface Type
|
|
nonres_roof, !- Construction Name
|
|
Cafe_Flr_1, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
53.9500,5.7910,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
53.9500,0.0000,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.5630,0.0000,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.5630,5.7910,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Wall_1_North,!- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Lobby_Flr_1, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
53.9500,22.8600,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
53.9500,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,22.8600,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Wall_2_North,!- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Lobby_Flr_1, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
81.9910,22.8600,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
81.9910,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
78.9430,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
78.9430,22.8600,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Wall_1_South,!- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Lobby_Flr_1, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
11.5820,0.0000,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
11.5820,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
53.9500,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
53.9500,0.0000,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Wall_1_West, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Lobby_Flr_1, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,22.8600,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,12.4970,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,12.4970,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Wall_2_South,!- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Lobby_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Retail_2_Flr_1_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,12.4970,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,12.4970,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.5820,12.4970,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.5820,12.4970,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Wall_3_South,!- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Lobby_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Cafe_Flr_1_Wall_1_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
53.9500,5.7910,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
53.9500,5.7910,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
81.9910,5.7910,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
81.9910,5.7910,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Wall_2_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Lobby_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Retail_1_Flr_1_Wall_East,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
11.5820,5.7910,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
11.5820,5.7910,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.5820,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.5820,0.0000,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Wall_3_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Lobby_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Retail_2_Flr_1_Wall_East,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
11.5820,12.4970,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
11.5820,12.4970,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.5820,5.7910,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.5820,5.7910,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Wall_4_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Lobby_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Storage_Flr_1_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
78.9430,22.8600,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
78.9430,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
78.9430,12.4970,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
78.9430,12.4970,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Wall_3_North,!- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Lobby_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Mech_Flr_1_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
69.7990,12.4970,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
69.7990,12.4970,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
53.9500,12.4970,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
53.9500,12.4970,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Wall_4_North,!- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Lobby_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Storage_Flr_1_Wall_South,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
78.9430,12.4970,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
78.9430,12.4970,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
69.7990,12.4970,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
69.7990,12.4970,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Wall_1_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Lobby_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Mech_Flr_1_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
53.9500,12.4970,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
53.9500,12.4970,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
53.9500,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
53.9500,22.8600,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Wall_2_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Lobby_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Cafe_Flr_1_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
53.9500,0.0000,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
53.9500,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
53.9500,5.7910,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
53.9500,5.7910,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Wall_3_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Lobby_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Laundry_Flr_1_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
81.9910,5.7910,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
81.9910,5.7910,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
81.9910,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
81.9910,22.8600,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Floor_1, !- Name
|
|
Floor, !- Surface Type
|
|
nonres_floor, !- Construction Name
|
|
Lobby_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Basement_Ceiling_7, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
0.0000,12.4970,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
53.9500,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
53.9500,0.0000,0.0000, !- X,Y,Z ==> Vertex 4 {m}
|
|
11.5820,0.0000,0.0000, !- X,Y,Z ==> Vertex 5 {m}
|
|
11.5820,12.4970,0.0000; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Floor_2, !- Name
|
|
Floor, !- Surface Type
|
|
nonres_floor, !- Construction Name
|
|
Lobby_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Basement_Ceiling_8, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
53.9500,12.4970,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
78.9430,12.4970,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
78.9430,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
81.9910,22.8600,0.0000, !- X,Y,Z ==> Vertex 4 {m}
|
|
81.9910,5.7910,0.0000, !- X,Y,Z ==> Vertex 5 {m}
|
|
53.9500,5.7910,0.0000; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Ceiling_1, !- Name
|
|
Ceiling, !- Surface Type
|
|
nonres_floor_ceiling, !- Construction Name
|
|
Lobby_Flr_1, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lobby_Flr_1_Ceiling_1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
10, !- Number of Vertices
|
|
0.0000,12.4970,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
11.5820,12.4970,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.5820,5.7910,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
81.9910,5.7910,3.9624, !- X,Y,Z ==> Vertex 4 {m}
|
|
81.9910,22.8600,3.9624, !- X,Y,Z ==> Vertex 5 {m}
|
|
78.9430,22.8600,3.9624, !- X,Y,Z ==> Vertex 6 {m}
|
|
78.9430,12.4970,3.9624, !- X,Y,Z ==> Vertex 7 {m}
|
|
53.9500,12.4970,3.9624, !- X,Y,Z ==> Vertex 8 {m}
|
|
53.9500,22.8600,3.9624, !- X,Y,Z ==> Vertex 9 {m}
|
|
0.0000,22.8600,3.9624; !- X,Y,Z ==> Vertex 10 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Ceiling_2, !- Name
|
|
Roof, !- Surface Type
|
|
nonres_roof, !- Construction Name
|
|
Lobby_Flr_1, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
11.5820,5.7910,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
11.5820,0.0000,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
53.9500,0.0000,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
53.9500,5.7910,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_1_Flr_3_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Room_1_Flr_3, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,5.7910,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,5.7910,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,5.7910,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,5.7910,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_1_Flr_3_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Room_1_Flr_3, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,14.3260,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,14.3260,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,5.7910,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,5.7910,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_1_Flr_3_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
nonres_floor, !- Construction Name
|
|
Room_1_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_1_Flr_3_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,14.3260,7.0080, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,5.7910,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,5.7910,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,14.3260,7.0080; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_1_Flr_3_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Room_1_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_2_Flr_3_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,14.3260,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,14.3260,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,14.3260,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,14.3260,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_1_Flr_3_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Room_1_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_3_Wall_3_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,5.7910,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,5.7910,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,14.3260,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,14.3260,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_1_Flr_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
nonres_floor_ceiling, !- Construction Name
|
|
Room_1_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_1_Flr_3_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,14.3260,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,5.7910,10.0560, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,5.7910,10.0560, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,14.3260,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_2_Flr_3_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Room_2_Flr_3, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,22.8600,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,22.8600,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,22.8600,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,22.8600,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_2_Flr_3_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Room_2_Flr_3, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,22.8600,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,22.8600,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,14.3260,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,14.3260,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_2_Flr_3_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
nonres_floor, !- Construction Name
|
|
Room_2_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_2_Flr_3_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,22.8600,7.0080, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,14.3260,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,14.3260,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,22.8600,7.0080; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_2_Flr_3_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Room_2_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_3_Wall_4_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,14.3260,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,14.3260,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,22.8600,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,22.8600,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_2_Flr_3_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Room_2_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_1_Flr_3_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,14.3260,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,14.3260,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,14.3260,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,14.3260,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_2_Flr_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
nonres_floor_ceiling, !- Construction Name
|
|
Room_2_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_2_Flr_3_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,22.8600,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,14.3260,10.0560, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,14.3260,10.0560, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,22.8600,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_3_Mult19_Flr_3_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Room_3_Mult19_Flr_3, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.7060,5.7910,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.7060,5.7910,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.3630,5.7910,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.3630,5.7910,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_3_Mult19_Flr_3_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
nonres_floor, !- Construction Name
|
|
Room_3_Mult19_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_3_Mult19_Flr_3_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
10.3630,12.4970,7.0080, !- X,Y,Z ==> Vertex 1 {m}
|
|
10.3630,5.7910,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.7060,5.7910,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.7060,12.4970,7.0080; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_3_Mult19_Flr_3_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Room_3_Mult19_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_3_Mult19_Flr_3_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
10.3630,12.4970,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
10.3630,12.4970,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.7060,12.4970,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.7060,12.4970,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_3_Mult19_Flr_3_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Room_3_Mult19_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_3_Mult19_Flr_3_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
10.3630,5.7910,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
10.3630,5.7910,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.3630,12.4970,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.3630,12.4970,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_3_Mult19_Flr_3_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Room_3_Mult19_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_3_Mult19_Flr_3_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.7060,12.4970,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.7060,12.4970,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.7060,5.7910,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.7060,5.7910,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_3_Mult19_Flr_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
nonres_floor_ceiling, !- Construction Name
|
|
Room_3_Mult19_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_3_Mult19_Flr_3_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.7060,12.4970,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.7060,5.7910,10.0560, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.3630,5.7910,10.0560, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.3630,12.4970,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_4_Mult19_Flr_3_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Room_4_Mult19_Flr_3, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
14.0210,22.8600,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
14.0210,22.8600,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.3630,22.8600,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.3630,22.8600,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_4_Mult19_Flr_3_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
nonres_floor, !- Construction Name
|
|
Room_4_Mult19_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_4_Mult19_Flr_3_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
14.0210,22.8600,7.0080, !- X,Y,Z ==> Vertex 1 {m}
|
|
14.0210,16.1540,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.3630,16.1540,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.3630,22.8600,7.0080; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_4_Mult19_Flr_3_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Room_4_Mult19_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_4_Mult19_Flr_3_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
14.0210,16.1540,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
14.0210,16.1540,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
14.0210,22.8600,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
14.0210,22.8600,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_4_Mult19_Flr_3_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Room_4_Mult19_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_4_Mult19_Flr_3_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
10.3630,16.1540,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
10.3630,16.1540,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
14.0210,16.1540,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
14.0210,16.1540,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_4_Mult19_Flr_3_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Room_4_Mult19_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_4_Mult19_Flr_3_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
10.3630,22.8600,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
10.3630,22.8600,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.3630,16.1540,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.3630,16.1540,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_4_Mult19_Flr_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
nonres_floor_ceiling, !- Construction Name
|
|
Room_4_Mult19_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_4_Mult19_Flr_3_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
10.3630,22.8600,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
10.3630,16.1540,10.0560, !- X,Y,Z ==> Vertex 2 {m}
|
|
14.0210,16.1540,10.0560, !- X,Y,Z ==> Vertex 3 {m}
|
|
14.0210,22.8600,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_5_Flr_3_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Room_5_Flr_3, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
86.5630,5.7910,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
86.5630,5.7910,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.5630,14.3260,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.5630,14.3260,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_5_Flr_3_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Room_5_Flr_3, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
81.9910,5.7910,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
81.9910,5.7910,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.5630,5.7910,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.5630,5.7910,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_5_Flr_3_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
nonres_floor, !- Construction Name
|
|
Room_5_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_5_Flr_3_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
86.5630,14.3260,7.0080, !- X,Y,Z ==> Vertex 1 {m}
|
|
86.5630,5.7910,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
81.9910,5.7910,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
81.9910,14.3260,7.0080; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_5_Flr_3_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Room_5_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_6_Flr_3_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
86.5630,14.3260,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
86.5630,14.3260,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
81.9910,14.3260,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
81.9910,14.3260,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_5_Flr_3_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Room_5_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_3_Wall_3_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
81.9910,14.3260,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
81.9910,14.3260,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
81.9910,5.7910,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
81.9910,5.7910,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_5_Flr_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
nonres_floor_ceiling, !- Construction Name
|
|
Room_5_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_5_Flr_3_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
81.9910,14.3260,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
81.9910,5.7910,10.0560, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.5630,5.7910,10.0560, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.5630,14.3260,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_6_Flr_3_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Room_6_Flr_3, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
86.5630,22.8600,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
86.5630,22.8600,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
81.9910,22.8600,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
81.9910,22.8600,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_6_Flr_3_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Room_6_Flr_3, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
86.5630,14.3260,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
86.5630,14.3260,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.5630,22.8600,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.5630,22.8600,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_6_Flr_3_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
nonres_floor, !- Construction Name
|
|
Room_6_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_6_Flr_3_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
86.5630,22.8600,7.0080, !- X,Y,Z ==> Vertex 1 {m}
|
|
86.5630,14.3260,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
81.9910,14.3260,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
81.9910,22.8600,7.0080; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_6_Flr_3_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Room_6_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_5_Flr_3_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
81.9910,14.3260,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
81.9910,14.3260,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.5630,14.3260,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.5630,14.3260,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_6_Flr_3_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Room_6_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_3_Wall_4_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
81.9910,22.8600,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
81.9910,22.8600,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
81.9910,14.3260,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
81.9910,14.3260,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_6_Flr_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
nonres_floor_ceiling, !- Construction Name
|
|
Room_6_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_6_Flr_3_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
81.9910,22.8600,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
81.9910,14.3260,10.0560, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.5630,14.3260,10.0560, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.5630,22.8600,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_3_Wall_1_North, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Corridor_Flr_3, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
10.3630,22.8600,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
10.3630,22.8600,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,22.8600,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,22.8600,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_3_Wall_2_North, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Corridor_Flr_3, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
81.9910,22.8600,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
81.9910,22.8600,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
79.8580,22.8600,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
79.8580,22.8600,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_3_Wall_1_South, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Corridor_Flr_3, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,5.7910,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,5.7910,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.7060,5.7910,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.7060,5.7910,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_3_Wall_2_South, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Corridor_Flr_3, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
76.2000,5.7910,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
76.2000,5.7910,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
81.9910,5.7910,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
81.9910,5.7910,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_3_Floor_1, !- Name
|
|
Floor, !- Surface Type
|
|
nonres_floor, !- Construction Name
|
|
Corridor_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_3_Floor_1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
4.5720,5.7910,7.0080, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,22.8600,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.3630,22.8600,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.3630,12.4970,7.0080, !- X,Y,Z ==> Vertex 4 {m}
|
|
6.7060,12.4970,7.0080, !- X,Y,Z ==> Vertex 5 {m}
|
|
6.7060,5.7910,7.0080; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_3_Floor_2, !- Name
|
|
Floor, !- Surface Type
|
|
nonres_floor, !- Construction Name
|
|
Corridor_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_3_Floor_2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
10.3630,16.1540,7.0080, !- X,Y,Z ==> Vertex 1 {m}
|
|
76.2000,16.1540,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
76.2000,12.4970,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.3630,12.4970,7.0080; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_3_Floor_3, !- Name
|
|
Floor, !- Surface Type
|
|
nonres_floor, !- Construction Name
|
|
Corridor_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_3_Floor_3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
76.2000,16.1540,7.0080, !- X,Y,Z ==> Vertex 1 {m}
|
|
79.8580,16.1540,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
79.8580,22.8600,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
81.9910,22.8600,7.0080, !- X,Y,Z ==> Vertex 4 {m}
|
|
81.9910,5.7910,7.0080, !- X,Y,Z ==> Vertex 5 {m}
|
|
76.2000,5.7910,7.0080; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_3_Wall_3_North, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Corridor_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_3_Wall_3_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
79.8580,16.1540,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
79.8580,16.1540,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.3630,16.1540,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.3630,16.1540,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_3_Wall_1_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Corridor_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_3_Wall_1_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
10.3630,16.1540,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
10.3630,16.1540,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.3630,22.8600,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.3630,22.8600,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_3_Wall_2_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Corridor_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_3_Wall_2_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.7060,5.7910,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.7060,5.7910,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.7060,12.4970,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.7060,12.4970,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_3_Wall_3_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Corridor_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_5_Flr_3_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
81.9910,5.7910,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
81.9910,5.7910,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
81.9910,14.3260,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
81.9910,14.3260,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_3_Wall_4_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Corridor_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_6_Flr_3_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
81.9910,14.3260,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
81.9910,14.3260,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
81.9910,22.8600,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
81.9910,22.8600,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_3_Wall_3_South, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Corridor_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_3_Wall_3_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.7060,12.4970,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.7060,12.4970,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
76.2000,12.4970,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
76.2000,12.4970,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_3_Wall_1_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Corridor_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_3_Wall_1_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
79.8580,22.8600,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
79.8580,22.8600,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
79.8580,16.1540,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
79.8580,16.1540,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_3_Wall_2_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Corridor_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_3_Wall_2_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
76.2000,12.4970,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
76.2000,12.4970,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
76.2000,5.7910,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
76.2000,5.7910,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_3_Wall_3_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Corridor_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_1_Flr_3_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,14.3260,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,14.3260,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,5.7910,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,5.7910,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_3_Wall_4_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Corridor_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_2_Flr_3_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,22.8600,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,22.8600,7.0080, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,14.3260,7.0080, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,14.3260,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_3_Ceiling_1,!- Name
|
|
Ceiling, !- Surface Type
|
|
nonres_floor_ceiling, !- Construction Name
|
|
Corridor_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_3_Ceiling_1,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
4.5720,5.7910,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.7060,5.7910,10.0560, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.7060,12.4970,10.0560, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.3630,12.4970,10.0560, !- X,Y,Z ==> Vertex 4 {m}
|
|
10.3630,22.8600,10.0560, !- X,Y,Z ==> Vertex 5 {m}
|
|
4.5720,22.8600,10.0560; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_3_Ceiling_2,!- Name
|
|
Ceiling, !- Surface Type
|
|
nonres_floor_ceiling, !- Construction Name
|
|
Corridor_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_3_Ceiling_2,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
10.3630,12.4970,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
76.2000,12.4970,10.0560, !- X,Y,Z ==> Vertex 2 {m}
|
|
76.2000,16.1540,10.0560, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.3630,16.1540,10.0560; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_3_Ceiling_3,!- Name
|
|
Ceiling, !- Surface Type
|
|
nonres_floor_ceiling, !- Construction Name
|
|
Corridor_Flr_3, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_3_Ceiling_3,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
76.2000,5.7910,10.0560, !- X,Y,Z ==> Vertex 1 {m}
|
|
81.9910,5.7910,10.0560, !- X,Y,Z ==> Vertex 2 {m}
|
|
81.9910,22.8600,10.0560, !- X,Y,Z ==> Vertex 3 {m}
|
|
79.8580,22.8600,10.0560, !- X,Y,Z ==> Vertex 4 {m}
|
|
79.8580,16.1540,10.0560, !- X,Y,Z ==> Vertex 5 {m}
|
|
76.2000,16.1540,10.0560; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_1_Flr_6_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Room_1_Flr_6, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,5.7910,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,5.7910,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,5.7910,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,5.7910,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_1_Flr_6_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Room_1_Flr_6, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,14.3260,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,14.3260,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,5.7910,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,5.7910,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_1_Flr_6_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
nonres_floor, !- Construction Name
|
|
Room_1_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_1_Flr_6_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,14.3260,16.1520, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,5.7910,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,5.7910,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,14.3260,16.1520; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_1_Flr_6_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Room_1_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_2_Flr_6_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,14.3260,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,14.3260,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,14.3260,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,14.3260,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_1_Flr_6_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Room_1_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_1_Flr_6_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,5.7910,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,5.7910,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,14.3260,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,14.3260,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_1_Flr_6_Ceiling, !- Name
|
|
Roof, !- Surface Type
|
|
nonres_roof, !- Construction Name
|
|
Room_1_Flr_6, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,14.3260,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,5.7910,19.2000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,5.7910,19.2000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,14.3260,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_2_Flr_6_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Room_2_Flr_6, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,22.8600,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,22.8600,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,22.8600,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,22.8600,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_2_Flr_6_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Room_2_Flr_6, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,22.8600,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,22.8600,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,14.3260,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,14.3260,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_2_Flr_6_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
nonres_floor, !- Construction Name
|
|
Room_2_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_2_Flr_6_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,22.8600,16.1520, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,14.3260,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,14.3260,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,22.8600,16.1520; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_2_Flr_6_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Room_2_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_2_Flr_6_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,14.3260,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,14.3260,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,22.8600,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,22.8600,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_2_Flr_6_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Room_2_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_1_Flr_6_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,14.3260,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,14.3260,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,14.3260,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,14.3260,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_2_Flr_6_Ceiling, !- Name
|
|
Roof, !- Surface Type
|
|
nonres_roof, !- Construction Name
|
|
Room_2_Flr_6, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,22.8600,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,14.3260,19.2000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,14.3260,19.2000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,22.8600,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_3_Mult9_Flr_6_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Room_3_Mult9_Flr_6, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,5.7910,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,5.7910,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.2780,5.7910,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.2780,5.7910,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_3_Mult9_Flr_6_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
nonres_floor, !- Construction Name
|
|
Room_3_Mult9_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_3_Mult9_Flr_6_Floor,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
11.2780,9.4490,16.1520, !- X,Y,Z ==> Vertex 1 {m}
|
|
11.2780,5.7910,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,5.7910,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,9.4490,16.1520; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_3_Mult9_Flr_6_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Room_3_Mult9_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_3_Mult9_Flr_6_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
11.2780,9.4490,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
11.2780,9.4490,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,9.4490,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,9.4490,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_3_Mult9_Flr_6_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Room_3_Mult9_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_3_Mult9_Flr_6_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
11.2780,5.7910,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
11.2780,5.7910,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.2780,9.4490,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.2780,9.4490,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_3_Mult9_Flr_6_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Room_3_Mult9_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Room_3_Mult9_Flr_6_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,9.4490,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,9.4490,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,5.7910,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,5.7910,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Room_3_Mult9_Flr_6_Ceiling, !- Name
|
|
Roof, !- Surface Type
|
|
nonres_roof, !- Construction Name
|
|
Room_3_Mult9_Flr_6, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,9.4490,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,5.7910,19.2000, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.2780,5.7910,19.2000, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.2780,9.4490,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Banquet_Flr_6_Wall_North,!- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Banquet_Flr_6, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
42.3670,22.8600,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
42.3670,22.8600,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.3630,22.8600,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.3630,22.8600,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Banquet_Flr_6_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
nonres_floor, !- Construction Name
|
|
Banquet_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Banquet_Flr_6_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
42.3670,22.8600,16.1520, !- X,Y,Z ==> Vertex 1 {m}
|
|
42.3670,12.4970,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.3630,12.4970,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.3630,22.8600,16.1520; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Banquet_Flr_6_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Banquet_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_6_Wall_3_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
42.3670,12.4970,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
42.3670,12.4970,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
42.3670,22.8600,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
42.3670,22.8600,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Banquet_Flr_6_Wall_South,!- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Banquet_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_6_Wall_3_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
10.3630,12.4970,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
10.3630,12.4970,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
42.3670,12.4970,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
42.3670,12.4970,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Banquet_Flr_6_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Banquet_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_6_Wall_1_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
10.3630,22.8600,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
10.3630,22.8600,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.3630,12.4970,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.3630,12.4970,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Banquet_Flr_6_Ceiling, !- Name
|
|
Roof, !- Surface Type
|
|
nonres_roof, !- Construction Name
|
|
Banquet_Flr_6, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
10.3630,22.8600,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
10.3630,12.4970,19.2000, !- X,Y,Z ==> Vertex 2 {m}
|
|
42.3670,12.4970,19.2000, !- X,Y,Z ==> Vertex 3 {m}
|
|
42.3670,22.8600,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Dining_Flr_6_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Dining_Flr_6, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
79.5530,22.8600,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
79.5530,22.8600,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
47.5490,22.8600,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
47.5490,22.8600,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Dining_Flr_6_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
nonres_floor, !- Construction Name
|
|
Dining_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Dining_Flr_6_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
79.5530,22.8600,16.1520, !- X,Y,Z ==> Vertex 1 {m}
|
|
79.5530,12.4970,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
47.5490,12.4970,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
47.5490,22.8600,16.1520; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Dining_Flr_6_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Dining_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Kitchen_Flr_6_Wall_2_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
79.5530,12.4970,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
79.5530,12.4970,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
79.5530,22.8600,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
79.5530,22.8600,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Dining_Flr_6_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Dining_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Dining_Flr_6_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
47.5490,12.4970,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
47.5490,12.4970,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
79.5530,12.4970,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
79.5530,12.4970,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Dining_Flr_6_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Dining_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_6_Wall_2_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
47.5490,22.8600,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
47.5490,22.8600,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
47.5490,12.4970,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
47.5490,12.4970,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Dining_Flr_6_Ceiling, !- Name
|
|
Roof, !- Surface Type
|
|
nonres_roof, !- Construction Name
|
|
Dining_Flr_6, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
47.5490,22.8600,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
47.5490,12.4970,19.2000, !- X,Y,Z ==> Vertex 2 {m}
|
|
79.5530,12.4970,19.2000, !- X,Y,Z ==> Vertex 3 {m}
|
|
79.5530,22.8600,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Kitchen_Flr_6_Wall_North,!- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Kitchen_Flr_6, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
86.5630,22.8600,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
86.5630,22.8600,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
79.5530,22.8600,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
79.5530,22.8600,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Kitchen_Flr_6_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Kitchen_Flr_6, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
86.5630,5.7910,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
86.5630,5.7910,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.5630,22.8600,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.5630,22.8600,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Kitchen_Flr_6_Wall_1_South, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Kitchen_Flr_6, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
81.9910,5.7910,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
81.9910,5.7910,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.5630,5.7910,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.5630,5.7910,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Kitchen_Flr_6_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
nonres_floor, !- Construction Name
|
|
Kitchen_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Kitchen_Flr_6_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
79.5530,12.4970,16.1520, !- X,Y,Z ==> Vertex 1 {m}
|
|
79.5530,22.8600,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.5630,22.8600,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.5630,5.7910,16.1520, !- X,Y,Z ==> Vertex 4 {m}
|
|
81.9910,5.7910,16.1520, !- X,Y,Z ==> Vertex 5 {m}
|
|
81.9910,12.4970,16.1520; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Kitchen_Flr_6_Wall_2_South, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Kitchen_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Kitchen_Flr_6_Wall_2_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
79.5530,12.4970,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
79.5530,12.4970,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
81.9910,12.4970,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
81.9910,12.4970,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Kitchen_Flr_6_Wall_1_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Kitchen_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_6_Wall_3_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
81.9910,12.4970,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
81.9910,12.4970,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
81.9910,5.7910,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
81.9910,5.7910,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Kitchen_Flr_6_Wall_2_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Kitchen_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Dining_Flr_6_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
79.5530,22.8600,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
79.5530,22.8600,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
79.5530,12.4970,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
79.5530,12.4970,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Kitchen_Flr_6_Ceiling, !- Name
|
|
Roof, !- Surface Type
|
|
nonres_roof, !- Construction Name
|
|
Kitchen_Flr_6, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
79.5530,12.4970,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
81.9910,12.4970,19.2000, !- X,Y,Z ==> Vertex 2 {m}
|
|
81.9910,5.7910,19.2000, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.5630,5.7910,19.2000, !- X,Y,Z ==> Vertex 4 {m}
|
|
86.5630,22.8600,19.2000, !- X,Y,Z ==> Vertex 5 {m}
|
|
79.5530,22.8600,19.2000; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_6_Wall_1_North, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Corridor_Flr_6, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
10.3630,22.8600,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
10.3630,22.8600,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,22.8600,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,22.8600,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_6_Wall_2_North, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Corridor_Flr_6, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
47.5490,22.8600,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
47.5490,22.8600,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
42.3670,22.8600,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
42.3670,22.8600,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_6_Wall_2_South, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Corridor_Flr_6, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
64.9220,5.7910,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
64.9220,5.7910,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
81.9910,5.7910,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
81.9910,5.7910,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_6_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
nonres_floor, !- Construction Name
|
|
Corridor_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_6_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
12, !- Number of Vertices
|
|
4.5720,9.4490,16.1520, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,22.8600,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.3630,22.8600,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.3630,12.4970,16.1520, !- X,Y,Z ==> Vertex 4 {m}
|
|
42.3670,12.4970,16.1520, !- X,Y,Z ==> Vertex 5 {m}
|
|
42.3670,22.8600,16.1520, !- X,Y,Z ==> Vertex 6 {m}
|
|
47.5490,22.8600,16.1520, !- X,Y,Z ==> Vertex 7 {m}
|
|
47.5490,12.4970,16.1520, !- X,Y,Z ==> Vertex 8 {m}
|
|
81.9910,12.4970,16.1520, !- X,Y,Z ==> Vertex 9 {m}
|
|
81.9910,5.7910,16.1520, !- X,Y,Z ==> Vertex 10 {m}
|
|
64.9220,5.7910,16.1520, !- X,Y,Z ==> Vertex 11 {m}
|
|
64.9220,9.4490,16.1520; !- X,Y,Z ==> Vertex 12 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_6_Wall_3_North, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Corridor_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Banquet_Flr_6_Wall_South,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
42.3670,12.4970,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
42.3670,12.4970,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.3630,12.4970,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.3630,12.4970,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_6_Wall_4_North, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Corridor_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_6_Wall_4_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
81.9910,12.4970,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
81.9910,12.4970,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
47.5490,12.4970,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
47.5490,12.4970,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_6_Wall_1_South, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Corridor_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_6_Wall_1_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,9.4490,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,9.4490,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
64.9220,9.4490,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
64.9220,9.4490,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_6_Wall_1_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Corridor_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_6_Wall_1_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
64.9220,9.4490,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
64.9220,9.4490,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
64.9220,5.7910,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
64.9220,5.7910,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_6_Wall_2_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Corridor_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_6_Wall_2_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,22.8600,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,22.8600,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,9.4490,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,9.4490,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_6_Wall_3_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Corridor_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Banquet_Flr_6_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
42.3670,22.8600,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
42.3670,22.8600,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
42.3670,12.4970,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
42.3670,12.4970,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_6_Wall_1_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Corridor_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Banquet_Flr_6_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
10.3630,12.4970,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
10.3630,12.4970,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.3630,22.8600,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.3630,22.8600,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_6_Wall_2_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Corridor_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Dining_Flr_6_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
47.5490,12.4970,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
47.5490,12.4970,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
47.5490,22.8600,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
47.5490,22.8600,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_6_Wall_3_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Corridor_Flr_6, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Kitchen_Flr_6_Wall_1_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
81.9910,5.7910,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
81.9910,5.7910,16.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
81.9910,12.4970,16.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
81.9910,12.4970,19.2000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_6_Ceiling_1,!- Name
|
|
Roof, !- Surface Type
|
|
nonres_roof, !- Construction Name
|
|
Corridor_Flr_6, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
8, !- Number of Vertices
|
|
4.5720,9.4490,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
47.5490,9.4490,19.2000, !- X,Y,Z ==> Vertex 2 {m}
|
|
47.5490,22.8600,19.2000, !- X,Y,Z ==> Vertex 3 {m}
|
|
42.3670,22.8600,19.2000, !- X,Y,Z ==> Vertex 4 {m}
|
|
42.3670,12.4970,19.2000, !- X,Y,Z ==> Vertex 5 {m}
|
|
10.3630,12.4970,19.2000, !- X,Y,Z ==> Vertex 6 {m}
|
|
10.3630,22.8600,19.2000, !- X,Y,Z ==> Vertex 7 {m}
|
|
4.5720,22.8600,19.2000; !- X,Y,Z ==> Vertex 8 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_6_Ceiling_2,!- Name
|
|
Roof, !- Surface Type
|
|
nonres_roof, !- Construction Name
|
|
Corridor_Flr_6, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
47.5490,9.4490,19.2000, !- X,Y,Z ==> Vertex 1 {m}
|
|
64.9220,9.4490,19.2000, !- X,Y,Z ==> Vertex 2 {m}
|
|
64.9220,5.7910,19.2000, !- X,Y,Z ==> Vertex 3 {m}
|
|
81.9910,5.7910,19.2000, !- X,Y,Z ==> Vertex 4 {m}
|
|
81.9910,12.4970,19.2000, !- X,Y,Z ==> Vertex 5 {m}
|
|
47.5490,12.4970,19.2000; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: FENESTRATIONSURFACE:DETAILED ===========
|
|
|
|
FenestrationSurface:Detailed,
|
|
Retail_1_Flr_1_Wall_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
|
|
Retail_1_Flr_1_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.3310,0.0000,2.2860, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.3310,0.0000,0.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.2510,0.0000,0.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.2510,0.0000,2.2860; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Cafe_Flr_1_Wall_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
|
|
Cafe_Flr_1_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
54.8810,0.0000,2.2860, !- X,Y,Z ==> Vertex 1 {m}
|
|
54.8810,0.0000,0.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
85.6310,0.0000,0.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
85.6310,0.0000,2.2860; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Lobby_Flr_1_Wall_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
|
|
Lobby_Flr_1_Wall_1_South,!- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
12.7930,0.0000,2.2860, !- X,Y,Z ==> Vertex 1 {m}
|
|
12.7930,0.0000,0.1520, !- X,Y,Z ==> Vertex 2 {m}
|
|
52.7390,0.0000,0.1520, !- X,Y,Z ==> Vertex 3 {m}
|
|
52.7390,0.0000,2.2860; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Room_1_Flr_3_Wall_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
ResWindow_U_0.35_SHGC_0.38, !- Construction Name
|
|
Room_1_Flr_3_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.4000,5.7910,9.3318, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.4000,5.7910,8.1128, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.1720,5.7910,8.1128, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.1720,5.7910,9.3318; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Room_1_Flr_3_Wall_West_Window, !- Name
|
|
Window, !- Surface Type
|
|
ResWindow_U_0.35_SHGC_0.38, !- Construction Name
|
|
Room_1_Flr_3_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,13.5790,9.3318, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,13.5790,8.1128, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,6.5380,8.1128, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,6.5380,9.3318; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Room_2_Flr_3_Wall_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
ResWindow_U_0.35_SHGC_0.38, !- Construction Name
|
|
Room_2_Flr_3_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
4.1720,22.8600,9.3318, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.1720,22.8600,8.1128, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.4000,22.8600,8.1128, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.4000,22.8600,9.3318; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Room_2_Flr_3_Wall_West_Window, !- Name
|
|
Window, !- Surface Type
|
|
ResWindow_U_0.35_SHGC_0.38, !- Construction Name
|
|
Room_2_Flr_3_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,22.1130,9.3318, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,22.1130,8.1128, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,15.0720,8.1128, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,15.0720,9.3318; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Room_3_Mult19_Flr_3_Wall_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
ResWindow_U_0.35_SHGC_0.38, !- Construction Name
|
|
Room_3_Mult19_Flr_3_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
7.0260,5.7910,9.3318, !- X,Y,Z ==> Vertex 1 {m}
|
|
7.0260,5.7910,8.1128, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.0430,5.7910,8.1128, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.0430,5.7910,9.3318; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Room_4_Mult19_Flr_3_Wall_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
ResWindow_U_0.35_SHGC_0.38, !- Construction Name
|
|
Room_4_Mult19_Flr_3_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
13.7010,22.8600,9.3318, !- X,Y,Z ==> Vertex 1 {m}
|
|
13.7010,22.8600,8.1128, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.6830,22.8600,8.1128, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.6830,22.8600,9.3318; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Room_5_Flr_3_Wall_East_Window, !- Name
|
|
Window, !- Surface Type
|
|
ResWindow_U_0.35_SHGC_0.38, !- Construction Name
|
|
Room_5_Flr_3_Wall_East, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
86.5630,6.5380,9.3318, !- X,Y,Z ==> Vertex 1 {m}
|
|
86.5630,6.5380,8.1128, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.5630,13.5790,8.1128, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.5630,13.5790,9.3318; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Room_5_Flr_3_Wall_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
ResWindow_U_0.35_SHGC_0.38, !- Construction Name
|
|
Room_5_Flr_3_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
82.3910,5.7910,9.3318, !- X,Y,Z ==> Vertex 1 {m}
|
|
82.3910,5.7910,8.1128, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.1630,5.7910,8.1128, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.1630,5.7910,9.3318; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Room_6_Flr_3_Wall_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
ResWindow_U_0.35_SHGC_0.38, !- Construction Name
|
|
Room_6_Flr_3_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
86.1630,22.8600,9.3318, !- X,Y,Z ==> Vertex 1 {m}
|
|
86.1630,22.8600,8.1128, !- X,Y,Z ==> Vertex 2 {m}
|
|
82.3910,22.8600,8.1128, !- X,Y,Z ==> Vertex 3 {m}
|
|
82.3910,22.8600,9.3318; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Room_6_Flr_3_Wall_East_Window, !- Name
|
|
Window, !- Surface Type
|
|
ResWindow_U_0.35_SHGC_0.38, !- Construction Name
|
|
Room_6_Flr_3_Wall_East, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
86.5630,15.0720,9.3318, !- X,Y,Z ==> Vertex 1 {m}
|
|
86.5630,15.0720,8.1128, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.5630,22.1130,8.1128, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.5630,22.1130,9.3318; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Corridor_Flr_3_Wall_1_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
|
|
Corridor_Flr_3_Wall_1_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
9.8560,22.8600,9.3318, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.8560,22.8600,8.1128, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.0790,22.8600,8.1128, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.0790,22.8600,9.3318; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Corridor_Flr_3_Wall_2_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
|
|
Corridor_Flr_3_Wall_2_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
81.8050,22.8600,9.3318, !- X,Y,Z ==> Vertex 1 {m}
|
|
81.8050,22.8600,8.1128, !- X,Y,Z ==> Vertex 2 {m}
|
|
80.0440,22.8600,8.1128, !- X,Y,Z ==> Vertex 3 {m}
|
|
80.0440,22.8600,9.3318; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Corridor_Flr_3_Wall_1_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
|
|
Corridor_Flr_3_Wall_1_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
4.7590,5.7910,9.3318, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.7590,5.7910,8.1128, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.5190,5.7910,8.1128, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.5190,5.7910,9.3318; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Corridor_Flr_3_Wall_2_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
|
|
Corridor_Flr_3_Wall_2_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
76.7070,5.7910,9.3318, !- X,Y,Z ==> Vertex 1 {m}
|
|
76.7070,5.7910,8.1128, !- X,Y,Z ==> Vertex 2 {m}
|
|
81.4840,5.7910,8.1128, !- X,Y,Z ==> Vertex 3 {m}
|
|
81.4840,5.7910,9.3318; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Room_1_Flr_6_Wall_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
ResWindow_U_0.35_SHGC_0.38, !- Construction Name
|
|
Room_1_Flr_6_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.4000,5.7910,18.4840, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.4000,5.7910,17.2640, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.1720,5.7910,17.2640, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.1720,5.7910,18.4840; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Room_1_Flr_6_Wall_West_Window, !- Name
|
|
Window, !- Surface Type
|
|
ResWindow_U_0.35_SHGC_0.38, !- Construction Name
|
|
Room_1_Flr_6_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,13.5790,18.4840, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,13.5790,17.2640, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,6.5380,17.2640, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,6.5380,18.4840; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Room_2_Flr_6_Wall_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
ResWindow_U_0.35_SHGC_0.38, !- Construction Name
|
|
Room_2_Flr_6_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
4.1720,22.8600,18.4840, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.1720,22.8600,17.2640, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.4000,22.8600,17.2640, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.4000,22.8600,18.4840; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Room_2_Flr_6_Wall_West_Window, !- Name
|
|
Window, !- Surface Type
|
|
ResWindow_U_0.35_SHGC_0.38, !- Construction Name
|
|
Room_2_Flr_6_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,22.1130,18.4840, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,22.1130,17.2640, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,15.0720,17.2640, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,15.0720,18.4840; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Room_3_Mult9_Flr_6_Wall_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
ResWindow_U_0.35_SHGC_0.38, !- Construction Name
|
|
Room_3_Mult9_Flr_6_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
5.1590,5.7910,18.4840, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.1590,5.7910,17.2640, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.6910,5.7910,17.2640, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.6910,5.7910,18.4840; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Banquet_Flr_6_Wall_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
|
|
Banquet_Flr_6_Wall_North,!- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
39.5670,22.8600,18.4840, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.5670,22.8600,17.2640, !- X,Y,Z ==> Vertex 2 {m}
|
|
13.1640,22.8600,17.2640, !- X,Y,Z ==> Vertex 3 {m}
|
|
13.1640,22.8600,18.4840; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Dining_Flr_6_Wall_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
|
|
Dining_Flr_6_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
76.7520,22.8600,18.4840, !- X,Y,Z ==> Vertex 1 {m}
|
|
76.7520,22.8600,17.2640, !- X,Y,Z ==> Vertex 2 {m}
|
|
50.3490,22.8600,17.2640, !- X,Y,Z ==> Vertex 3 {m}
|
|
50.3490,22.8600,18.4840; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Kitchen_Flr_6_Wall_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
|
|
Kitchen_Flr_6_Wall_North,!- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
86.1630,22.8600,18.4840, !- X,Y,Z ==> Vertex 1 {m}
|
|
86.1630,22.8600,17.2640, !- X,Y,Z ==> Vertex 2 {m}
|
|
82.3910,22.8600,17.2640, !- X,Y,Z ==> Vertex 3 {m}
|
|
82.3910,22.8600,18.4840; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Kitchen_Flr_6_Wall_East_Window, !- Name
|
|
Window, !- Surface Type
|
|
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
|
|
Kitchen_Flr_6_Wall_East, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
86.5630,7.2850,18.4840, !- X,Y,Z ==> Vertex 1 {m}
|
|
86.5630,7.2850,17.2640, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.5630,21.3660,17.2640, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.5630,21.3660,18.4840; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Kitchen_Flr_6_Wall_1_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
|
|
Kitchen_Flr_6_Wall_1_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
82.3910,5.7910,18.4840, !- X,Y,Z ==> Vertex 1 {m}
|
|
82.3910,5.7910,17.2640, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.1630,5.7910,17.2640, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.1630,5.7910,18.4840; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Corridor_Flr_6_Wall_1_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
|
|
Corridor_Flr_6_Wall_1_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
9.8560,22.8600,18.4840, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.8560,22.8600,17.2640, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.0790,22.8600,17.2640, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.0790,22.8600,18.4840; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Corridor_Flr_6_Wall_2_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
|
|
Corridor_Flr_6_Wall_2_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
47.0950,22.8600,18.4840, !- X,Y,Z ==> Vertex 1 {m}
|
|
47.0950,22.8600,17.2640, !- X,Y,Z ==> Vertex 2 {m}
|
|
42.8210,22.8600,17.2640, !- X,Y,Z ==> Vertex 3 {m}
|
|
42.8210,22.8600,18.4840; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Corridor_Flr_6_Wall_2_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
|
|
Corridor_Flr_6_Wall_2_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
66.4160,5.7910,18.4840, !- X,Y,Z ==> Vertex 1 {m}
|
|
66.4160,5.7910,17.2640, !- X,Y,Z ==> Vertex 2 {m}
|
|
80.4980,5.7910,17.2640, !- X,Y,Z ==> Vertex 3 {m}
|
|
80.4980,5.7910,18.4840; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Cafe_Flr_1_Wall_East_Door, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door_con, !- Construction Name
|
|
Cafe_Flr_1_Wall_East, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
86.563000000000,2.895500000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
86.563000000000,2.895500000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.563000000000,3.809900000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.563000000000,3.809900000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Laundry_Flr_1_Wall_East_Door, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door_con, !- Construction Name
|
|
Laundry_Flr_1_Wall_East, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
86.563000000000,8.361018257503,2.133600000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
86.563000000000,8.361018257503,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
86.563000000000,9.275418257503,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
86.563000000000,9.275418257503,2.133600000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Lobby_Flr_1_Wall_1_North_Door1, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door_con, !- Construction Name
|
|
Lobby_Flr_1_Wall_1_North,!- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
49.003221567010,22.860000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.003221567010,22.860000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
48.088821567010,22.860000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
48.088821567010,22.860000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Lobby_Flr_1_Wall_1_North_Door2, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door_con, !- Construction Name
|
|
Lobby_Flr_1_Wall_1_North,!- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
8.994891299472,22.860000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
8.994891299472,22.860000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
8.080491299472,22.860000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
8.080491299472,22.860000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Storage_Flr_1_Wall_North_RollDoor, !- Name
|
|
Door, !- Surface Type
|
|
Overhead Door_con, !- Construction Name
|
|
Storage_Flr_1_Wall_North,!- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
76.371820451682,22.860000000000,2.438400000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
76.371820451682,22.860000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.323820451682,22.860000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.323820451682,22.860000000000,2.438400000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Retail_2_Flr_1_Wall_West_Door, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door_con, !- Construction Name
|
|
Retail_2_Flr_1_Wall_West,!- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000000000000,10.283582317678,2.133600000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.000000000000,10.283582317678,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.000000000000,9.369182317678,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000000000000,9.369182317678,2.133600000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: INTERNALMASS ===========
|
|
|
|
InternalMass,
|
|
Basement_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Basement, !- Zone Name
|
|
3957.6604; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Retail_1_Flr_1_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Retail_1_Flr_1, !- Zone Name
|
|
134.1427; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Retail_2_Flr_1_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Retail_2_Flr_1, !- Zone Name
|
|
155.3378; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Mech_Flr_1_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Mech_Flr_1, !- Zone Name
|
|
328.4864; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Storage_Flr_1_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Storage_Flr_1, !- Zone Name
|
|
189.5185; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Laundry_Flr_1_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Laundry_Flr_1, !- Zone Name
|
|
156.0789; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Cafe_Flr_1_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Cafe_Flr_1, !- Zone Name
|
|
377.7238; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Lobby_Flr_1_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Lobby_Flr_1, !- Zone Name
|
|
2616.3722; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Room_1_Flr_3_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Room_1_Flr_3, !- Zone Name
|
|
78.0440; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Room_2_Flr_3_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Room_2_Flr_3, !- Zone Name
|
|
78.0349; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Room_3_Mult19_Flr_3_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Room_3_Mult19_Flr_3, !- Zone Name
|
|
49.0477; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Room_4_Mult19_Flr_3_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Room_4_Mult19_Flr_3, !- Zone Name
|
|
49.0611; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Room_5_Flr_3_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Room_5_Flr_3, !- Zone Name
|
|
78.0440; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Room_6_Flr_3_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Room_6_Flr_3, !- Zone Name
|
|
78.0349; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Corridor_Flr_3_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Corridor_Flr_3, !- Zone Name
|
|
778.8094; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Room_1_Flr_6_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Room_1_Flr_6, !- Zone Name
|
|
78.0440; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Room_2_Flr_6_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Room_2_Flr_6, !- Zone Name
|
|
78.0349; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Room_3_Mult9_Flr_6_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Room_3_Mult9_Flr_6, !- Zone Name
|
|
49.0611; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Banquet_Flr_6_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Banquet_Flr_6, !- Zone Name
|
|
663.3149; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Dining_Flr_6_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Dining_Flr_6, !- Zone Name
|
|
663.3149; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Kitchen_Flr_6_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Kitchen_Flr_6, !- Zone Name
|
|
206.6089; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Corridor_Flr_6_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Corridor_Flr_6, !- Zone Name
|
|
824.2494; !- Surface Area {m2}
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: PEOPLE ===========
|
|
|
|
People,
|
|
Basement People, !- Name
|
|
Basement, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
People, !- Number of People Calculation Method
|
|
106.499, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Retail_1_Flr_1 People, !- Name
|
|
Retail_1_Flr_1, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
People, !- Number of People Calculation Method
|
|
10.829, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Retail_2_Flr_1 People, !- Name
|
|
Retail_2_Flr_1, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
People, !- Number of People Calculation Method
|
|
12.540, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Laundry_Flr_1 People, !- Name
|
|
Laundry_Flr_1, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
People, !- Number of People Calculation Method
|
|
8.4, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Cafe_Flr_1 People, !- Name
|
|
Cafe_Flr_1, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
People, !- Number of People Calculation Method
|
|
142.3000, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Lobby_Flr_1 People, !- Name
|
|
Lobby_Flr_1, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
People, !- Number of People Calculation Method
|
|
422.4350, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Room_1_Flr_3 People, !- Name
|
|
Room_1_Flr_3, !- Zone or ZoneList Name
|
|
GuestRoom_Occ_Sch, !- Number of People Schedule Name
|
|
People, !- Number of People Calculation Method
|
|
1.5000, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Room_2_Flr_3 People, !- Name
|
|
Room_2_Flr_3, !- Zone or ZoneList Name
|
|
GuestRoom_Occ_Sch, !- Number of People Schedule Name
|
|
People, !- Number of People Calculation Method
|
|
1.5000, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Room_3_Mult19_Flr_3 People, !- Name
|
|
Room_3_Mult19_Flr_3, !- Zone or ZoneList Name
|
|
ALWAYS_OFF, !- Number of People Schedule Name
|
|
People, !- Number of People Calculation Method
|
|
1.5000, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Room_4_Mult19_Flr_3 People, !- Name
|
|
Room_4_Mult19_Flr_3, !- Zone or ZoneList Name
|
|
GuestRoom_Occ_Sch, !- Number of People Schedule Name
|
|
People, !- Number of People Calculation Method
|
|
1.5000, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Room_5_Flr_3 People, !- Name
|
|
Room_5_Flr_3, !- Zone or ZoneList Name
|
|
GuestRoom_Occ_Sch, !- Number of People Schedule Name
|
|
People, !- Number of People Calculation Method
|
|
1.5000, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Room_6_Flr_3 People, !- Name
|
|
Room_6_Flr_3, !- Zone or ZoneList Name
|
|
GuestRoom_Occ_Sch, !- Number of People Schedule Name
|
|
People, !- Number of People Calculation Method
|
|
1.5000, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Room_1_Flr_6 People, !- Name
|
|
Room_1_Flr_6, !- Zone or ZoneList Name
|
|
GuestRoom_Occ_Sch, !- Number of People Schedule Name
|
|
People, !- Number of People Calculation Method
|
|
1.5000, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Room_2_Flr_6 People, !- Name
|
|
Room_2_Flr_6, !- Zone or ZoneList Name
|
|
GuestRoom_Occ_Sch, !- Number of People Schedule Name
|
|
People, !- Number of People Calculation Method
|
|
1.5000, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Room_3_Mult9_Flr_6 People, !- Name
|
|
Room_3_Mult9_Flr_6, !- Zone or ZoneList Name
|
|
GuestRoom_Occ_Sch, !- Number of People Schedule Name
|
|
People, !- Number of People Calculation Method
|
|
1.5000, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Banquet_Flr_6 People, !- Name
|
|
Banquet_Flr_6, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
People, !- Number of People Calculation Method
|
|
249.8960, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Dining_Flr_6 People, !- Name
|
|
Dining_Flr_6, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
People, !- Number of People Calculation Method
|
|
249.8960, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Kitchen_Flr_6 People, !- Name
|
|
Kitchen_Flr_6, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
People, !- Number of People Calculation Method
|
|
22.238, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: LIGHTS ===========
|
|
|
|
Lights,
|
|
Basement_Lights, !- Name
|
|
Basement, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_OFFICE_BSMT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
6.888902667,!- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Retail_1_Flr_1_Lights, !- Name
|
|
Retail_1_Flr_1, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.04168475, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Retail_2_Flr_1_Lights, !- Name
|
|
Retail_2_Flr_1, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.04168475, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Mech_Flr_1_Lights, !- Name
|
|
Mech_Flr_1, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_MECHANIC_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.2257149,!- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Storage_Flr_1_Lights, !- Name
|
|
Storage_Flr_1, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_STORAGE_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
4.090285958, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Laundry_Flr_1_Lights, !- Name
|
|
Laundry_Flr_1, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_Misc_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
5.704872521, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Cafe_Flr_1_Lights, !- Name
|
|
Cafe_Flr_1, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_Misc_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
6.45834625, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Lobby_Flr_1_Lights, !- Name
|
|
Lobby_Flr_1, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
5.489594313, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Room_1_Flr_3_Lights, !- Name
|
|
Room_1_Flr_3, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_GUESTROOM_SCH,!- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
4.413203271, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Room_2_Flr_3_Lights, !- Name
|
|
Room_2_Flr_3, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_GUESTROOM_SCH,!- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
4.413203271, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Room_3_Mult19_Flr_3_Lights, !- Name
|
|
Room_3_Mult19_Flr_3, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_GUESTROOM_SCH,!- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
4.413203271, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Room_4_Mult19_Flr_3_Lights, !- Name
|
|
Room_4_Mult19_Flr_3, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_GUESTROOM_SCH,!- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
4.413203271, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Room_5_Flr_3_Lights, !- Name
|
|
Room_5_Flr_3, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_GUESTROOM_SCH,!- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
4.413203271, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Room_6_Flr_3_Lights, !- Name
|
|
Room_6_Flr_3, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_GUESTROOM_SCH,!- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
4.413203271, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Corridor_Flr_3_Lights, !- Name
|
|
Corridor_Flr_3, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_CORRIDOR_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
4.413203271, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Room_1_Flr_6_Lights, !- Name
|
|
Room_1_Flr_6, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_GUESTROOM_SCH,!- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
4.413203271, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Room_2_Flr_6_Lights, !- Name
|
|
Room_2_Flr_6, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_GUESTROOM_SCH,!- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
4.413203271, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Room_3_Mult9_Flr_6_Lights, !- Name
|
|
Room_3_Mult9_Flr_6, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_GUESTROOM_SCH,!- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
4.413203271, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Banquet_Flr_6_Lights, !- Name
|
|
Banquet_Flr_6, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_Misc_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
6.45834625, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Dining_Flr_6_Lights, !- Name
|
|
Dining_Flr_6, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_Misc_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
6.45834625, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Kitchen_Flr_6_Lights, !- Name
|
|
Kitchen_Flr_6, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_Misc_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.73266235, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Corridor_Flr_6_Lights, !- Name
|
|
Corridor_Flr_6, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_CORRIDOR_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
4.413203271, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
!- =========== ALL OBJECTS IN CLASS: DAYLIGHTING:CONTROLS ===========
|
|
|
|
Daylighting:Controls,
|
|
Lobby_Flr_1_DaylCtrl, !- Name
|
|
Lobby_Flr_1, !- Zone Name
|
|
SplitFlux, !- Daylighting Method
|
|
, !- Availability Schedule Name
|
|
Continuousoff, !- Lighting Control Type
|
|
0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control
|
|
0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control
|
|
3, !- Number of Stepped Control Steps
|
|
1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control
|
|
Lobby_Flr_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name
|
|
180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg}
|
|
22.0, !- Maximum Allowable Discomfort Glare Index
|
|
, !- DElight Gridding Resolution {m2}
|
|
Lobby_Flr_1_DaylRefPt1, !- Daylighting Reference Point 1 Name
|
|
0.07, !- Fraction of Zone Controlled by Reference Point 1
|
|
269, !- Illuminance Setpoint at Reference Point 1 {lux}
|
|
Lobby_Flr_1_DaylRefPt2, !- Daylighting Reference Point 2 Name
|
|
0.07, !- Fraction of Zone Controlled by Reference Point 2
|
|
269; !- Illuminance Setpoint at Reference Point 2 {lux}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Lobby_Flr_1_DaylRefPt1, !- Name
|
|
Lobby_Flr_1, !- Zone Name
|
|
32.766000, !- X-Coordinate of Reference Point {m}
|
|
1.531600, !- Y-Coordinate of Reference Point {m}
|
|
0.762000; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Lobby_Flr_1_DaylRefPt2, !- Name
|
|
Lobby_Flr_1, !- Zone Name
|
|
32.766000, !- X-Coordinate of Reference Point {m}
|
|
3.063200, !- Y-Coordinate of Reference Point {m}
|
|
0.762000; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:Controls,
|
|
Cafe_Flr_1_DaylCtrl, !- Name
|
|
Cafe_Flr_1, !- Zone Name
|
|
SplitFlux, !- Daylighting Method
|
|
, !- Availability Schedule Name
|
|
Continuousoff, !- Lighting Control Type
|
|
0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control
|
|
0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control
|
|
3, !- Number of Stepped Control Steps
|
|
1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control
|
|
Cafe_Flr_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name
|
|
180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg}
|
|
22.0, !- Maximum Allowable Discomfort Glare Index
|
|
, !- DElight Gridding Resolution {m2}
|
|
Cafe_Flr_1_DaylRefPt1, !- Daylighting Reference Point 1 Name
|
|
0.39, !- Fraction of Zone Controlled by Reference Point 1
|
|
215.0, !- Illuminance Setpoint at Reference Point 1 {lux}
|
|
Cafe_Flr_1_DaylRefPt2, !- Daylighting Reference Point 2 Name
|
|
0.39, !- Fraction of Zone Controlled by Reference Point 2
|
|
215.0; !- Illuminance Setpoint at Reference Point 2 {lux}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Cafe_Flr_1_DaylRefPt1, !- Name
|
|
Cafe_Flr_1, !- Zone Name
|
|
70.256500, !- X-Coordinate of Reference Point {m}
|
|
1.531600, !- Y-Coordinate of Reference Point {m}
|
|
0.762000; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Cafe_Flr_1_DaylRefPt2, !- Name
|
|
Cafe_Flr_1, !- Zone Name
|
|
70.256500, !- X-Coordinate of Reference Point {m}
|
|
3.063200, !- Y-Coordinate of Reference Point {m}
|
|
0.762000; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:Controls,
|
|
Dining_Flr_6_DaylCtrl, !- Name
|
|
Dining_Flr_6, !- Zone Name
|
|
SplitFlux, !- Daylighting Method
|
|
, !- Availability Schedule Name
|
|
Continuousoff, !- Lighting Control Type
|
|
0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control
|
|
0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control
|
|
3, !- Number of Stepped Control Steps
|
|
1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control
|
|
Dining_Flr_6_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name
|
|
0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg}
|
|
22.0, !- Maximum Allowable Discomfort Glare Index
|
|
, !- DElight Gridding Resolution {m2}
|
|
Dining_Flr_6_DaylRefPt1, !- Daylighting Reference Point 1 Name
|
|
0.20, !- Fraction of Zone Controlled by Reference Point 1
|
|
215.0, !- Illuminance Setpoint at Reference Point 1 {lux}
|
|
Dining_Flr_6_DaylRefPt2, !- Daylighting Reference Point 2 Name
|
|
0.20, !- Fraction of Zone Controlled by Reference Point 2
|
|
215.0; !- Illuminance Setpoint at Reference Point 2 {lux}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Dining_Flr_6_DaylRefPt1, !- Name
|
|
Dining_Flr_6, !- Zone Name
|
|
63.551000, !- X-Coordinate of Reference Point {m}
|
|
21.297600, !- Y-Coordinate of Reference Point {m}
|
|
16.914000; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Dining_Flr_6_DaylRefPt2, !- Name
|
|
Dining_Flr_6, !- Zone Name
|
|
63.551000, !- X-Coordinate of Reference Point {m}
|
|
19.735100, !- Y-Coordinate of Reference Point {m}
|
|
16.914000; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:Controls,
|
|
Banquet_Flr_6_DaylCtrl, !- Name
|
|
Banquet_Flr_6, !- Zone Name
|
|
SplitFlux, !- Daylighting Method
|
|
, !- Availability Schedule Name
|
|
Continuousoff, !- Lighting Control Type
|
|
0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control
|
|
0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control
|
|
3, !- Number of Stepped Control Steps
|
|
1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control
|
|
Banquet_Flr_6_DaylRefPt1,!- Glare Calculation Daylighting Reference Point Name
|
|
0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg}
|
|
22.0, !- Maximum Allowable Discomfort Glare Index
|
|
, !- DElight Gridding Resolution {m2}
|
|
Banquet_Flr_6_DaylRefPt1,!- Daylighting Reference Point 1 Name
|
|
0.20, !- Fraction of Zone Controlled by Reference Point 1
|
|
215.0, !- Illuminance Setpoint at Reference Point 1 {lux}
|
|
Banquet_Flr_6_DaylRefPt2,!- Daylighting Reference Point 2 Name
|
|
0.20, !- Fraction of Zone Controlled by Reference Point 2
|
|
215.0; !- Illuminance Setpoint at Reference Point 2 {lux}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Banquet_Flr_6_DaylRefPt1,!- Name
|
|
Banquet_Flr_6, !- Zone Name
|
|
26.365000, !- X-Coordinate of Reference Point {m}
|
|
21.297600, !- Y-Coordinate of Reference Point {m}
|
|
16.914000; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Banquet_Flr_6_DaylRefPt2,!- Name
|
|
Banquet_Flr_6, !- Zone Name
|
|
26.365000, !- X-Coordinate of Reference Point {m}
|
|
19.735100, !- Y-Coordinate of Reference Point {m}
|
|
16.914000; !- Z-Coordinate of Reference Point {m}
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ELECTRICEQUIPMENT ===========
|
|
|
|
ElectricEquipment,
|
|
Basement_MiscPlug_Equip, !- Name
|
|
Basement, !- Zone or ZoneList Name
|
|
BASEMENT_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
10646.1064, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Retail_1_Flr_1_MiscPlug_Equip, !- Name
|
|
Retail_1_Flr_1, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
721.6879, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Retail_2_Flr_1_MiscPlug_Equip, !- Name
|
|
Retail_2_Flr_1, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
835.7173, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Mech_Flr_1_MiscPlug_Equip, !- Name
|
|
Mech_Flr_1, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
883.6283, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Storage_Flr_1_MiscPlug_Equip, !- Name
|
|
Storage_Flr_1, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
254.9024, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Laundry_Flr_1_MiscPlug_Equip, !- Name
|
|
Laundry_Flr_1, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
4813.4744, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Cafe_Flr_1_MiscPlug_Equip, !- Name
|
|
Cafe_Flr_1, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
1016.0769, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Lobby_Flr_1_MiscPlug_Equip, !- Name
|
|
Lobby_Flr_1, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
10557.0620, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Room_1_Flr_3_PlugMisc_Equip, !- Name
|
|
Room_1_Flr_3, !- Zone or ZoneList Name
|
|
Guestroom_Eqp_Sch_Adva, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
263.3986, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Room_2_Flr_3_PlugMisc_Equip, !- Name
|
|
Room_2_Flr_3, !- Zone or ZoneList Name
|
|
Guestroom_Eqp_Sch_Adva, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
263.3678, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Room_3_Mult19_Flr_3_PlugMisc_Equip, !- Name
|
|
Room_3_Mult19_Flr_3, !- Zone or ZoneList Name
|
|
Guestroom_Eqp_Sch_Adva, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
257.9908, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Room_4_Mult19_Flr_3_PlugMisc_Equip, !- Name
|
|
Room_4_Mult19_Flr_3, !- Zone or ZoneList Name
|
|
Guestroom_Eqp_Sch_Adva, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
258.0614, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Room_5_Flr_3_PlugMisc_Equip, !- Name
|
|
Room_5_Flr_3, !- Zone or ZoneList Name
|
|
Guestroom_Eqp_Sch_Adva, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
263.3986, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Room_6_Flr_3_PlugMisc_Equip, !- Name
|
|
Room_6_Flr_3, !- Zone or ZoneList Name
|
|
Guestroom_Eqp_Sch_Adva, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
263.3678, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Room_1_Flr_6_PlugMisc_Equip, !- Name
|
|
Room_1_Flr_6, !- Zone or ZoneList Name
|
|
Guestroom_Eqp_Sch_Adva, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
263.3986, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Room_2_Flr_6_PlugMisc_Equip, !- Name
|
|
Room_2_Flr_6, !- Zone or ZoneList Name
|
|
Guestroom_Eqp_Sch_Adva, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
263.3678, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Room_3_Mult9_Flr_6_PlugMisc_Equip, !- Name
|
|
Room_3_Mult9_Flr_6, !- Zone or ZoneList Name
|
|
Guestroom_Eqp_Sch_Adva, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
258.0614, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Banquet_Flr_6_MiscPlug_Equip, !- Name
|
|
Banquet_Flr_6, !- Zone or ZoneList Name
|
|
Kitchen_Elec_Equip_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
22493.0084, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
Cooking; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Dining_Flr_6_MiscPlug_Equip, !- Name
|
|
Dining_Flr_6, !- Zone or ZoneList Name
|
|
Kitchen_Elec_Equip_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
22493.0084, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
Cooking; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Kitchen_Flr_6_MiscElec_Equip, !- Name
|
|
Kitchen_Flr_6, !- Zone or ZoneList Name
|
|
Kitchen_Elec_Equip_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
52482.7989, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.2000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.1000, !- Fraction Lost
|
|
Cooking; !- End-Use Subcategory
|
|
|
|
|
|
|
|
ElectricEquipment,
|
|
Kitchen_Flr_6_Reach-in-Freezer, !- Name
|
|
Kitchen_Flr_6, !- Zone or ZoneList Name
|
|
Always_on, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
277.5, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.2500, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
ReachInFreezer; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Kitchen_Flr_6_Reach-in-Refrigerator, !- Name
|
|
Kitchen_Flr_6, !- Zone or ZoneList Name
|
|
Always_on, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
156.7, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.2500, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
ReachInRefrigerator; !- End-Use Subcategory
|
|
|
|
|
|
Exterior:FuelEquipment,
|
|
Elevators, !- Name
|
|
Electricity, !- Fuel Use Type
|
|
BLDG_ELEVATORS, !- Schedule Name
|
|
122221.978021978, !- Design Level {W}
|
|
ElevatorLift; !- End-Use Subcategory
|
|
|
|
Exterior:FuelEquipment,
|
|
Elevators_Lights_Fan, !- Name
|
|
Electricity, !- Fuel Use Type
|
|
ELEV_LIGHT_FAN_SCH_ADD_DF, !- Schedule Name
|
|
375.9, !- Design Level {W}
|
|
ElevatorLightsFan; !- End-Use Subcategory
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: GASEQUIPMENT ===========
|
|
|
|
GasEquipment,
|
|
Laundry_Flr_1_MiscGas_Equip, !- Name
|
|
Laundry_Flr_1, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
41817.4489, !- Design Level {W}
|
|
, !- Power per Zone Floor Area {W/m2}
|
|
, !- Power per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
Laundry; !- End-Use Subcategory
|
|
|
|
GasEquipment,
|
|
Kitchen_Flr_6_MiscGas_Equip, !- Name
|
|
Kitchen_Flr_6, !- Zone or ZoneList Name
|
|
Kitchen_Gas_Equip_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
249920.3527, !- Design Level {W}
|
|
, !- Power per Zone Floor Area {W/m2}
|
|
, !- Power per Person {W/person}
|
|
0.1000, !- Fraction Latent
|
|
0.2000, !- Fraction Radiant
|
|
0.7000, !- Fraction Lost
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
Cooking; !- End-Use Subcategory
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION:DESIGNFLOWRATE ===========
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Retail_1_Flr_1_Infiltration, !- Name
|
|
Retail_1_Flr_1, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Retail_2_Flr_1_Infiltration, !- Name
|
|
Retail_2_Flr_1, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Mech_Flr_1_Infiltration, !- Name
|
|
Mech_Flr_1, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Storage_Flr_1_Infiltration, !- Name
|
|
Storage_Flr_1, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Laundry_Flr_1_Infiltration, !- Name
|
|
Laundry_Flr_1, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Cafe_Flr_1_Infiltration, !- Name
|
|
Cafe_Flr_1, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Lobby_Flr_1_Infiltration,!- Name
|
|
Lobby_Flr_1, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Room_1_Flr_3_Infiltration, !- Name
|
|
Room_1_Flr_3, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Room_2_Flr_3_Infiltration, !- Name
|
|
Room_2_Flr_3, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Room_3_Mult19_Flr_3_Infiltration, !- Name
|
|
Room_3_Mult19_Flr_3, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Room_4_Mult19_Flr_3_Infiltration, !- Name
|
|
Room_4_Mult19_Flr_3, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Room_5_Flr_3_Infiltration, !- Name
|
|
Room_5_Flr_3, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Room_6_Flr_3_Infiltration, !- Name
|
|
Room_6_Flr_3, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Corridor_Flr_3_Infiltration, !- Name
|
|
Corridor_Flr_3, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Room_1_Flr_6_Infiltration, !- Name
|
|
Room_1_Flr_6, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000287836864, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Room_2_Flr_6_Infiltration, !- Name
|
|
Room_2_Flr_6, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000287836864, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Room_3_Mult9_Flr_6_Infiltration, !- Name
|
|
Room_3_Mult9_Flr_6, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00025859232, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Banquet_Flr_6_Infiltration, !- Name
|
|
Banquet_Flr_6, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000129324608, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Dining_Flr_6_Infiltration, !- Name
|
|
Dining_Flr_6, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000129324608, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Kitchen_Flr_6_Infiltration, !- Name
|
|
Kitchen_Flr_6, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000260640576, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Corridor_Flr_6_Infiltration, !- Name
|
|
Corridor_Flr_6, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
9.7747328e-05, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ZONEMIXING ===========
|
|
!- =========== ALL OBJECTS IN CLASS: EXTERIOR:LIGHTS ===========
|
|
|
|
Exterior:Lights,
|
|
Exterior Facade Lighting, !- Name
|
|
Exterior_Lgt_ALWAYS_ON, !- Schedule Name
|
|
11632.5, !- Design Level {W}
|
|
AstronomicalClock, !- Control Option
|
|
General; !- End-Use Subcategory
|
|
!- =========== ALL OBJECTS IN CLASS: SIZING:PARAMETERS ===========
|
|
|
|
Sizing:Parameters,
|
|
1.0, !- Heating Sizing Factor
|
|
1.0, !- Cooling Sizing Factor
|
|
6; !- Timesteps in Averaging Window
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SIZING:ZONE ===========
|
|
|
|
Sizing:Zone,
|
|
Basement, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Basement, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Basement, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
0, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431633, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Retail_1_Flr_1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Retail_1_Flr_1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Retail_1_Flr_1, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.001180644, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Retail_2_Flr_1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Retail_2_Flr_1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Retail_2_Flr_1, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.001180644, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Mech_Flr_1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Mech_Flr_1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Mech_Flr_1, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Storage_Flr_1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Storage_Flr_1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Storage_Flr_1, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000609365, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Laundry_Flr_1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Laundry_Flr_1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Laundry_Flr_1, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Cafe_Flr_1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Cafe_Flr_1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Cafe_Flr_1, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.003580019, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Lobby_Flr_1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Lobby_Flr_1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Lobby_Flr_1, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.001447242, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Room_1_Flr_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Room_1_Flr_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
; !- Heating Maximum Air Flow Fraction
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Room_1_Flr_3, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000395372, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Room_2_Flr_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Room_2_Flr_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
; !- Heating Maximum Air Flow Fraction
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Room_2_Flr_3, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000395372, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Room_3_Mult19_Flr_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Room_3_Mult19_Flr_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
; !- Heating Maximum Air Flow Fraction
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Room_3_Mult19_Flr_3, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000448954, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Room_4_Mult19_Flr_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Room_4_Mult19_Flr_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
; !- Heating Maximum Air Flow Fraction
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Room_4_Mult19_Flr_3, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000448954, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Room_5_Flr_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Room_5_Flr_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
; !- Heating Maximum Air Flow Fraction
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Room_5_Flr_3, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000395372, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Room_6_Flr_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Room_6_Flr_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
; !- Heating Maximum Air Flow Fraction
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Room_6_Flr_3, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000395372, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Corridor_Flr_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Corridor_Flr_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Corridor_Flr_3, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000304682, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Room_1_Flr_6, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Room_1_Flr_6, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
; !- Heating Maximum Air Flow Fraction
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Room_1_Flr_6, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000395372, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Room_2_Flr_6, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Room_2_Flr_6, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
; !- Heating Maximum Air Flow Fraction
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Room_2_Flr_6, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000395372, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Room_3_Mult9_Flr_6, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Room_3_Mult9_Flr_6, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
; !- Heating Maximum Air Flow Fraction
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Room_3_Mult9_Flr_6, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000448954, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Banquet_Flr_6, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Banquet_Flr_6, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Banquet_Flr_6, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.003580019, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Dining_Flr_6, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Dining_Flr_6, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Dining_Flr_6, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.003580019, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Kitchen_Flr_6, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Kitchen_Flr_6, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.141584233179793, !- Cooling Minimum Air Flow {m3/s}
|
|
0.7, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Kitchen_Flr_6, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.003554628, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
|
|
|
|
Sizing:Zone,
|
|
Corridor_Flr_6, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Corridor_Flr_6, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Corridor_Flr_6, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000304682, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
VAV_Zone_AirDistribution, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
, !- Zone Air Distribution Effectiveness Schedule Name
|
|
, !- Zone Secondary Recirculation Fraction {dimensionless}
|
|
0.6; !- Minimum Zone Ventilation Efficiency {dimensionless}
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SIZING:SYSTEM ===========
|
|
|
|
|
|
|
|
|
|
Sizing:System,
|
|
VAV WITH REHEAT, !- AirLoop Name
|
|
Sensible, !- Type of Load to Size On
|
|
9.3256, !- Design Outdoor Air Flow Rate {m3/s}
|
|
0.3000, !- Central Heating Maximum System Air Flow Ratio
|
|
7.0, !- Preheat Design Temperature {C}
|
|
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Precool Design Temperature {C}
|
|
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Central Cooling Design Supply Air Temperature {C}
|
|
16.7000, !- Central Heating Design Supply Air Temperature {C}
|
|
Coincident, !- Type of Zone Sum to Use
|
|
No, !- 100% Outdoor Air in Cooling
|
|
No, !- 100% Outdoor Air in Heating
|
|
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
DesignDay, !- Cooling Supply Air Flow Rate Method
|
|
0.0, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
|
|
DesignDay, !- Heating Supply Air Flow Method
|
|
0.0, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
|
|
ZoneSum; !- System Outdoor Air Method
|
|
|
|
|
|
|
|
|
|
Sizing:System,
|
|
FLR_3_DOAS, !- AirLoop Name
|
|
Sensible, !- Type of Load to Size On
|
|
2.051199045, !- Design Outdoor Air Flow Rate {m3/s}
|
|
0.3000, !- Central Heating Maximum System Air Flow Ratio
|
|
7.0, !- Preheat Design Temperature {C}
|
|
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Precool Design Temperature {C}
|
|
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Central Cooling Design Supply Air Temperature {C}
|
|
16.7000, !- Central Heating Design Supply Air Temperature {C}
|
|
Coincident, !- Type of Zone Sum to Use
|
|
Yes, !- 100% Outdoor Air in Cooling
|
|
Yes, !- 100% Outdoor Air in Heating
|
|
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
Flow/System, !- Cooling Supply Air Flow Rate Method
|
|
2.051199045, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
|
|
Flow/System, !- Heating Supply Air Flow Rate Method
|
|
2.051199045, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
|
|
ZoneSum; !- System Outdoor Air Method
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SIZING:PLANT ===========
|
|
|
|
Sizing:Plant,
|
|
SWHSys1, !- Plant or Condenser Loop Name
|
|
Heating, !- Loop Type
|
|
60, !- Design Loop Exit Temperature {C}
|
|
5.0; !- Loop Design Temperature Difference {deltaC}
|
|
|
|
Sizing:Plant,
|
|
HeatSys1, !- Plant or Condenser Loop Name
|
|
Heating, !- Loop Type
|
|
82.0, !- Design Loop Exit Temperature {C}
|
|
11.0; !- Loop Design Temperature Difference {deltaC}
|
|
|
|
Sizing:Plant,
|
|
CoolSys1, !- Plant or Condenser Loop Name
|
|
Cooling, !- Loop Type
|
|
6.7, !- Design Loop Exit Temperature {C}
|
|
8.33; !- Loop Design Temperature Difference {deltaC}
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ZONECONTROL:THERMOSTAT ===========
|
|
|
|
|
|
ZoneControl:Thermostat,
|
|
Basement Thermostat, !- Name
|
|
Basement, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Basement DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Retail_1_Flr_1 Thermostat, !- Name
|
|
Retail_1_Flr_1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Retail_1_Flr_1 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Retail_2_Flr_1 Thermostat, !- Name
|
|
Retail_2_Flr_1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Retail_2_Flr_1 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Mech_Flr_1 Thermostat, !- Name
|
|
Mech_Flr_1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Mech_Flr_1 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Storage_Flr_1 Thermostat,!- Name
|
|
Storage_Flr_1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Storage_Flr_1 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Laundry_Flr_1 Thermostat,!- Name
|
|
Laundry_Flr_1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Laundry_Flr_1 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Cafe_Flr_1 Thermostat, !- Name
|
|
Cafe_Flr_1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Cafe_Flr_1 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Lobby_Flr_1 Thermostat, !- Name
|
|
Lobby_Flr_1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Lobby_Flr_1 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Room_1_Flr_3 Thermostat, !- Name
|
|
Room_1_Flr_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
S OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Room_2_Flr_3 Thermostat, !- Name
|
|
Room_2_Flr_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
N OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Room_3_Mult19_Flr_3 Thermostat, !- Name
|
|
Room_3_Mult19_Flr_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
VacGuestRoom Thermostat Dual SP Control; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Room_4_Mult19_Flr_3 Thermostat, !- Name
|
|
Room_4_Mult19_Flr_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
N OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Room_5_Flr_3 Thermostat, !- Name
|
|
Room_5_Flr_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
S OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Room_6_Flr_3 Thermostat, !- Name
|
|
Room_6_Flr_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
N OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Corridor_Flr_3 Thermostat, !- Name
|
|
Corridor_Flr_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Corridor_Flr_3 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Room_1_Flr_6 Thermostat, !- Name
|
|
Room_1_Flr_6, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
S OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Room_2_Flr_6 Thermostat, !- Name
|
|
Room_2_Flr_6, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
N OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Room_3_Mult9_Flr_6 Thermostat, !- Name
|
|
Room_3_Mult9_Flr_6, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
S OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Banquet_Flr_6 Thermostat,!- Name
|
|
Banquet_Flr_6, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Banquet_Flr_6 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Dining_Flr_6 Thermostat, !- Name
|
|
Dining_Flr_6, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Dining_Flr_6 DualSPSched;!- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Kitchen_Flr_6 Thermostat,!- Name
|
|
Kitchen_Flr_6, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Kitchen_Flr_6 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Corridor_Flr_6 Thermostat, !- Name
|
|
Corridor_Flr_6, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Corridor_Flr_6 DualSPSched; !- Control 1 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: THERMOSTATSETPOINT:DUALSETPOINT ===========
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
S OccGuestRoom Thermostat Dual SP Control, !- Name
|
|
OBCReset_S_OccGuestRoom_HtgSP_Sch_20min, !- Heating Setpoint Temperature Schedule Name
|
|
OBCReset_S_OccGuestRoom_ClgSP_Sch_20min; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
N OccGuestRoom Thermostat Dual SP Control, !- Name
|
|
OBCReset_N_OccGuestRoom_HtgSP_Sch_20min, !- Heating Setpoint Temperature Schedule Name
|
|
OBCReset_N_OccGuestRoom_ClgSP_Sch_20min; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
VacGuestRoom Thermostat Dual SP Control, !- Name
|
|
VacGuestRoom_HtgSP_Sch, !- Heating Setpoint Temperature Schedule Name
|
|
VacGuestRoom_ClgSP_Sch; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Basement DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Retail_1_Flr_1 DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Retail_2_Flr_1 DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Mech_Flr_1 DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Storage_Flr_1 DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Laundry_Flr_1 DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Cafe_Flr_1 DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Lobby_Flr_1 DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Corridor_Flr_3 DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Banquet_Flr_6 DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Dining_Flr_6 DualSPSched,!- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Kitchen_Flr_6 DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Corridor_Flr_6 DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ZONEHVAC:FOURPIPEFANCOIL ===========
|
|
|
|
ZoneHVAC:FourPipeFanCoil,
|
|
Room_1_Flr_3 fan coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
CyclingFan, !- Capacity Control Method
|
|
AUTOSIZE, !- Maximum Supply Air Flow Rate {m3/s}
|
|
, !- Low Speed Supply Air Flow Ratio
|
|
, !- Medium Speed Supply Air Flow Ratio
|
|
0, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
, !- Outdoor Air Schedule Name
|
|
Room_1_Flr_3 FCU Inlet Node, !- Air Inlet Node Name
|
|
Room_1_Flr_3 FCU Exhaust Node, !- Air Outlet Node Name
|
|
OutdoorAir:Mixer, !- Outdoor Air Mixer Object Type
|
|
Room_1_Flr_3 fan coilOA mixer, !- Outdoor Air Mixer Name
|
|
Fan:OnOff, !- Supply Air Fan Object Type
|
|
Room_1_Flr_3 fan coilfan,!- Supply Air Fan Name
|
|
Coil:Cooling:Water, !- Cooling Coil Object Type
|
|
Room_1_Flr_3 fan coilCool Coil, !- Cooling Coil Name
|
|
AUTOSIZE, !- Maximum Cold Water Flow Rate {m3/s}
|
|
0.0, !- Minimum Cold Water Flow Rate {m3/s}
|
|
0.001, !- Cooling Convergence Tolerance
|
|
Coil:Heating:Water, !- Heating Coil Object Type
|
|
Room_1_Flr_3 fan coilHeat Coil, !- Heating Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water Flow Rate {m3/s}
|
|
0.001; !- Heating Convergence Tolerance
|
|
|
|
ZoneHVAC:FourPipeFanCoil,
|
|
Room_2_Flr_3 fan coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
CyclingFan, !- Capacity Control Method
|
|
AUTOSIZE, !- Maximum Supply Air Flow Rate {m3/s}
|
|
, !- Low Speed Supply Air Flow Ratio
|
|
, !- Medium Speed Supply Air Flow Ratio
|
|
0, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
, !- Outdoor Air Schedule Name
|
|
Room_2_Flr_3 FCU Inlet Node, !- Air Inlet Node Name
|
|
Room_2_Flr_3 FCU Exhaust Node, !- Air Outlet Node Name
|
|
OutdoorAir:Mixer, !- Outdoor Air Mixer Object Type
|
|
Room_2_Flr_3 fan coilOA mixer, !- Outdoor Air Mixer Name
|
|
Fan:OnOff, !- Supply Air Fan Object Type
|
|
Room_2_Flr_3 fan coilfan,!- Supply Air Fan Name
|
|
Coil:Cooling:Water, !- Cooling Coil Object Type
|
|
Room_2_Flr_3 fan coilCool Coil, !- Cooling Coil Name
|
|
AUTOSIZE, !- Maximum Cold Water Flow Rate {m3/s}
|
|
0.0, !- Minimum Cold Water Flow Rate {m3/s}
|
|
0.001, !- Cooling Convergence Tolerance
|
|
Coil:Heating:Water, !- Heating Coil Object Type
|
|
Room_2_Flr_3 fan coilHeat Coil, !- Heating Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water Flow Rate {m3/s}
|
|
0.001; !- Heating Convergence Tolerance
|
|
|
|
ZoneHVAC:FourPipeFanCoil,
|
|
Room_3_Mult19_Flr_3 fan coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
CyclingFan, !- Capacity Control Method
|
|
AUTOSIZE, !- Maximum Supply Air Flow Rate {m3/s}
|
|
, !- Low Speed Supply Air Flow Ratio
|
|
, !- Medium Speed Supply Air Flow Ratio
|
|
0, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
, !- Outdoor Air Schedule Name
|
|
Room_3_Mult19_Flr_3 FCU Inlet Node, !- Air Inlet Node Name
|
|
Room_3_Mult19_Flr_3 FCU Exhaust Node, !- Air Outlet Node Name
|
|
OutdoorAir:Mixer, !- Outdoor Air Mixer Object Type
|
|
Room_3_Mult19_Flr_3 fan coilOA mixer, !- Outdoor Air Mixer Name
|
|
Fan:OnOff, !- Supply Air Fan Object Type
|
|
Room_3_Mult19_Flr_3 fan coilfan, !- Supply Air Fan Name
|
|
Coil:Cooling:Water, !- Cooling Coil Object Type
|
|
Room_3_Mult19_Flr_3 fan coilCool Coil, !- Cooling Coil Name
|
|
AUTOSIZE, !- Maximum Cold Water Flow Rate {m3/s}
|
|
0.0, !- Minimum Cold Water Flow Rate {m3/s}
|
|
0.001, !- Cooling Convergence Tolerance
|
|
Coil:Heating:Water, !- Heating Coil Object Type
|
|
Room_3_Mult19_Flr_3 fan coilHeat Coil, !- Heating Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water Flow Rate {m3/s}
|
|
0.001; !- Heating Convergence Tolerance
|
|
|
|
ZoneHVAC:FourPipeFanCoil,
|
|
Room_4_Mult19_Flr_3 fan coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
CyclingFan, !- Capacity Control Method
|
|
AUTOSIZE, !- Maximum Supply Air Flow Rate {m3/s}
|
|
, !- Low Speed Supply Air Flow Ratio
|
|
, !- Medium Speed Supply Air Flow Ratio
|
|
0, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
, !- Outdoor Air Schedule Name
|
|
Room_4_Mult19_Flr_3 FCU Inlet Node, !- Air Inlet Node Name
|
|
Room_4_Mult19_Flr_3 FCU Exhaust Node, !- Air Outlet Node Name
|
|
OutdoorAir:Mixer, !- Outdoor Air Mixer Object Type
|
|
Room_4_Mult19_Flr_3 fan coilOA mixer, !- Outdoor Air Mixer Name
|
|
Fan:OnOff, !- Supply Air Fan Object Type
|
|
Room_4_Mult19_Flr_3 fan coilfan, !- Supply Air Fan Name
|
|
Coil:Cooling:Water, !- Cooling Coil Object Type
|
|
Room_4_Mult19_Flr_3 fan coilCool Coil, !- Cooling Coil Name
|
|
AUTOSIZE, !- Maximum Cold Water Flow Rate {m3/s}
|
|
0.0, !- Minimum Cold Water Flow Rate {m3/s}
|
|
0.001, !- Cooling Convergence Tolerance
|
|
Coil:Heating:Water, !- Heating Coil Object Type
|
|
Room_4_Mult19_Flr_3 fan coilHeat Coil, !- Heating Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water Flow Rate {m3/s}
|
|
0.001; !- Heating Convergence Tolerance
|
|
|
|
ZoneHVAC:FourPipeFanCoil,
|
|
Room_5_Flr_3 fan coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
CyclingFan, !- Capacity Control Method
|
|
AUTOSIZE, !- Maximum Supply Air Flow Rate {m3/s}
|
|
, !- Low Speed Supply Air Flow Ratio
|
|
, !- Medium Speed Supply Air Flow Ratio
|
|
0, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
, !- Outdoor Air Schedule Name
|
|
Room_5_Flr_3 FCU Inlet Node, !- Air Inlet Node Name
|
|
Room_5_Flr_3 FCU Exhaust Node, !- Air Outlet Node Name
|
|
OutdoorAir:Mixer, !- Outdoor Air Mixer Object Type
|
|
Room_5_Flr_3 fan coilOA mixer, !- Outdoor Air Mixer Name
|
|
Fan:OnOff, !- Supply Air Fan Object Type
|
|
Room_5_Flr_3 fan coilfan,!- Supply Air Fan Name
|
|
Coil:Cooling:Water, !- Cooling Coil Object Type
|
|
Room_5_Flr_3 fan coilCool Coil, !- Cooling Coil Name
|
|
AUTOSIZE, !- Maximum Cold Water Flow Rate {m3/s}
|
|
0.0, !- Minimum Cold Water Flow Rate {m3/s}
|
|
0.001, !- Cooling Convergence Tolerance
|
|
Coil:Heating:Water, !- Heating Coil Object Type
|
|
Room_5_Flr_3 fan coilHeat Coil, !- Heating Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water Flow Rate {m3/s}
|
|
0.001; !- Heating Convergence Tolerance
|
|
|
|
ZoneHVAC:FourPipeFanCoil,
|
|
Room_6_Flr_3 fan coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
CyclingFan, !- Capacity Control Method
|
|
AUTOSIZE, !- Maximum Supply Air Flow Rate {m3/s}
|
|
, !- Low Speed Supply Air Flow Ratio
|
|
, !- Medium Speed Supply Air Flow Ratio
|
|
0, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
, !- Outdoor Air Schedule Name
|
|
Room_6_Flr_3 FCU Inlet Node, !- Air Inlet Node Name
|
|
Room_6_Flr_3 FCU Exhaust Node, !- Air Outlet Node Name
|
|
OutdoorAir:Mixer, !- Outdoor Air Mixer Object Type
|
|
Room_6_Flr_3 fan coilOA mixer, !- Outdoor Air Mixer Name
|
|
Fan:OnOff, !- Supply Air Fan Object Type
|
|
Room_6_Flr_3 fan coilfan,!- Supply Air Fan Name
|
|
Coil:Cooling:Water, !- Cooling Coil Object Type
|
|
Room_6_Flr_3 fan coilCool Coil, !- Cooling Coil Name
|
|
AUTOSIZE, !- Maximum Cold Water Flow Rate {m3/s}
|
|
0.0, !- Minimum Cold Water Flow Rate {m3/s}
|
|
0.001, !- Cooling Convergence Tolerance
|
|
Coil:Heating:Water, !- Heating Coil Object Type
|
|
Room_6_Flr_3 fan coilHeat Coil, !- Heating Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water Flow Rate {m3/s}
|
|
0.001; !- Heating Convergence Tolerance
|
|
|
|
ZoneHVAC:FourPipeFanCoil,
|
|
Room_1_Flr_6 fan coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
CyclingFan, !- Capacity Control Method
|
|
AUTOSIZE, !- Maximum Supply Air Flow Rate {m3/s}
|
|
, !- Low Speed Supply Air Flow Ratio
|
|
, !- Medium Speed Supply Air Flow Ratio
|
|
0, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
, !- Outdoor Air Schedule Name
|
|
Room_1_Flr_6 FCU Inlet Node, !- Air Inlet Node Name
|
|
Room_1_Flr_6 FCU Exhaust Node, !- Air Outlet Node Name
|
|
OutdoorAir:Mixer, !- Outdoor Air Mixer Object Type
|
|
Room_1_Flr_6 fan coilOA mixer, !- Outdoor Air Mixer Name
|
|
Fan:OnOff, !- Supply Air Fan Object Type
|
|
Room_1_Flr_6 fan coilfan,!- Supply Air Fan Name
|
|
Coil:Cooling:Water, !- Cooling Coil Object Type
|
|
Room_1_Flr_6 fan coilCool Coil, !- Cooling Coil Name
|
|
AUTOSIZE, !- Maximum Cold Water Flow Rate {m3/s}
|
|
0.0, !- Minimum Cold Water Flow Rate {m3/s}
|
|
0.001, !- Cooling Convergence Tolerance
|
|
Coil:Heating:Water, !- Heating Coil Object Type
|
|
Room_1_Flr_6 fan coilHeat Coil, !- Heating Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water Flow Rate {m3/s}
|
|
0.001; !- Heating Convergence Tolerance
|
|
|
|
ZoneHVAC:FourPipeFanCoil,
|
|
Room_2_Flr_6 fan coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
CyclingFan, !- Capacity Control Method
|
|
AUTOSIZE, !- Maximum Supply Air Flow Rate {m3/s}
|
|
, !- Low Speed Supply Air Flow Ratio
|
|
, !- Medium Speed Supply Air Flow Ratio
|
|
0, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
, !- Outdoor Air Schedule Name
|
|
Room_2_Flr_6 FCU Inlet Node, !- Air Inlet Node Name
|
|
Room_2_Flr_6 FCU Exhaust Node, !- Air Outlet Node Name
|
|
OutdoorAir:Mixer, !- Outdoor Air Mixer Object Type
|
|
Room_2_Flr_6 fan coilOA mixer, !- Outdoor Air Mixer Name
|
|
Fan:OnOff, !- Supply Air Fan Object Type
|
|
Room_2_Flr_6 fan coilfan,!- Supply Air Fan Name
|
|
Coil:Cooling:Water, !- Cooling Coil Object Type
|
|
Room_2_Flr_6 fan coilCool Coil, !- Cooling Coil Name
|
|
AUTOSIZE, !- Maximum Cold Water Flow Rate {m3/s}
|
|
0.0, !- Minimum Cold Water Flow Rate {m3/s}
|
|
0.001, !- Cooling Convergence Tolerance
|
|
Coil:Heating:Water, !- Heating Coil Object Type
|
|
Room_2_Flr_6 fan coilHeat Coil, !- Heating Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water Flow Rate {m3/s}
|
|
0.001; !- Heating Convergence Tolerance
|
|
|
|
ZoneHVAC:FourPipeFanCoil,
|
|
Room_3_Mult9_Flr_6 fan coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
CyclingFan, !- Capacity Control Method
|
|
AUTOSIZE, !- Maximum Supply Air Flow Rate {m3/s}
|
|
, !- Low Speed Supply Air Flow Ratio
|
|
, !- Medium Speed Supply Air Flow Ratio
|
|
0, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
, !- Outdoor Air Schedule Name
|
|
Room_3_Mult9_Flr_6 FCU Inlet Node, !- Air Inlet Node Name
|
|
Room_3_Mult9_Flr_6 FCU Exhaust Node, !- Air Outlet Node Name
|
|
OutdoorAir:Mixer, !- Outdoor Air Mixer Object Type
|
|
Room_3_Mult9_Flr_6 fan coilOA mixer, !- Outdoor Air Mixer Name
|
|
Fan:OnOff, !- Supply Air Fan Object Type
|
|
Room_3_Mult9_Flr_6 fan coilfan, !- Supply Air Fan Name
|
|
Coil:Cooling:Water, !- Cooling Coil Object Type
|
|
Room_3_Mult9_Flr_6 fan coilCool Coil, !- Cooling Coil Name
|
|
AUTOSIZE, !- Maximum Cold Water Flow Rate {m3/s}
|
|
0.0, !- Minimum Cold Water Flow Rate {m3/s}
|
|
0.001, !- Cooling Convergence Tolerance
|
|
Coil:Heating:Water, !- Heating Coil Object Type
|
|
Room_3_Mult9_Flr_6 fan coilHeat Coil, !- Heating Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water Flow Rate {m3/s}
|
|
0.001; !- Heating Convergence Tolerance
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AIRTERMINAL:SINGLEDUCT:UNCONTROLLED ===========
|
|
|
|
|
|
AirTerminal:SingleDuct:Uncontrolled,
|
|
Room_1_Flr_3 Direct Air, !- Name
|
|
Occ_Guestroom_Vent_Ctrl_20min, !- Availability Schedule Name
|
|
Room_1_Flr_3 Direct Air Inlet Node Name, !- Zone Supply Air Node Name
|
|
0.061733136; !- Maximum Air Flow Rate {m3/s}
|
|
|
|
AirTerminal:SingleDuct:Uncontrolled,
|
|
Room_2_Flr_3 Direct Air, !- Name
|
|
Occ_Guestroom_Vent_Ctrl_20min, !- Availability Schedule Name
|
|
Room_2_Flr_3 Direct Air Inlet Node Name, !- Zone Supply Air Node Name
|
|
0.061733136; !- Maximum Air Flow Rate {m3/s}
|
|
|
|
AirTerminal:SingleDuct:Uncontrolled,
|
|
Room_3_Mult19_Flr_3 Direct Air, !- Name
|
|
VAC_GUESTROOM_VENTILATION_SCHEDULE,!- Availability Schedule Name
|
|
Room_3_Mult19_Flr_3 Direct Air Inlet Node Name, !- Zone Supply Air Node Name
|
|
0.83695266; !- Maximum Air Flow Rate {m3/s}
|
|
|
|
AirTerminal:SingleDuct:Uncontrolled,
|
|
Room_4_Mult19_Flr_3 Direct Air, !- Name
|
|
Occ_Guestroom_Vent_Ctrl_20min, !- Availability Schedule Name
|
|
Room_4_Mult19_Flr_3 Direct Air Inlet Node Name, !- Zone Supply Air Node Name
|
|
0.83695266; !- Maximum Air Flow Rate {m3/s}
|
|
|
|
AirTerminal:SingleDuct:Uncontrolled,
|
|
Room_5_Flr_3 Direct Air, !- Name
|
|
Occ_Guestroom_Vent_Ctrl_20min, !- Availability Schedule Name
|
|
Room_5_Flr_3 Direct Air Inlet Node Name, !- Zone Supply Air Node Name
|
|
0.061733136; !- Maximum Air Flow Rate {m3/s}
|
|
|
|
AirTerminal:SingleDuct:Uncontrolled,
|
|
Room_6_Flr_3 Direct Air, !- Name
|
|
Occ_Guestroom_Vent_Ctrl_20min, !- Availability Schedule Name
|
|
Room_6_Flr_3 Direct Air Inlet Node Name, !- Zone Supply Air Node Name
|
|
0.061733136; !- Maximum Air Flow Rate {m3/s}
|
|
|
|
AirTerminal:SingleDuct:Uncontrolled,
|
|
Room_1_Flr_6 Direct Air, !- Name
|
|
Occ_Guestroom_Vent_Ctrl_20min, !- Availability Schedule Name
|
|
Room_1_Flr_6 Direct Air Inlet Node Name, !- Zone Supply Air Node Name
|
|
0.015433284; !- Maximum Air Flow Rate {m3/s}
|
|
|
|
AirTerminal:SingleDuct:Uncontrolled,
|
|
Room_2_Flr_6 Direct Air, !- Name
|
|
Occ_Guestroom_Vent_Ctrl_20min, !- Availability Schedule Name
|
|
Room_2_Flr_6 Direct Air Inlet Node Name, !- Zone Supply Air Node Name
|
|
0.015433284; !- Maximum Air Flow Rate {m3/s}
|
|
|
|
AirTerminal:SingleDuct:Uncontrolled,
|
|
Room_3_Mult9_Flr_6 Direct Air, !- Name
|
|
Occ_Guestroom_Vent_Ctrl_20min, !- Availability Schedule Name
|
|
Room_3_Mult9_Flr_6 Direct Air Inlet Node Name, !- Zone Supply Air Node Name
|
|
0.099112815; !- Maximum Air Flow Rate {m3/s}
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AIRTERMINAL:SINGLEDUCT:VAV:REHEAT ===========
|
|
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Basement VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Basement VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Basement VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.562, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Basement VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Basement VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
ReverseWithLimits, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Retail_2_Flr_1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Retail_2_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Retail_2_Flr_1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.65, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Retail_2_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Retail_2_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
ReverseWithLimits, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Storage_Flr_1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Storage_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Storage_Flr_1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Storage_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Storage_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
ReverseWithLimits, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Cafe_Flr_1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Cafe_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Cafe_Flr_1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.787, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Cafe_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Cafe_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
ReverseWithLimits, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Lobby_Flr_1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Lobby_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Lobby_Flr_1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.67, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Lobby_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Lobby_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
ReverseWithLimits, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Banquet_Flr_6 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Banquet_Flr_6 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Banquet_Flr_6 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.86, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Banquet_Flr_6 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Banquet_Flr_6 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
ReverseWithLimits, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Dining_Flr_6 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Dining_Flr_6 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Dining_Flr_6 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.817, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Dining_Flr_6 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Dining_Flr_6 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
ReverseWithLimits, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
!- =========== addendum H 2007 ===========
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Retail_1_Flr_1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Retail_1_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Retail_1_Flr_1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.399, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Retail_1_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Retail_1_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
ReverseWithLimits, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Mech_Flr_1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Mech_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Mech_Flr_1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.01, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Mech_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Mech_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
ReverseWithLimits, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Laundry_Flr_1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Laundry_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Laundry_Flr_1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.01, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Laundry_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Laundry_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
ReverseWithLimits, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Corridor_Flr_3 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Corridor_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Corridor_Flr_3 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.6, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Corridor_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Corridor_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
ReverseWithLimits, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Kitchen_Flr_6 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Kitchen_Flr_6 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Kitchen_Flr_6 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.242, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Kitchen_Flr_6 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Kitchen_Flr_6 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
ReverseWithLimits, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Corridor_Flr_6 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Corridor_Flr_6 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Corridor_Flr_6 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.362, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Corridor_Flr_6 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Corridor_Flr_6 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
ReverseWithLimits, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ZONEHVAC:AIRDISTRIBUTIONUNIT ===========
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Basement VAV Box, !- Name
|
|
Basement VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Basement VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Retail_1_Flr_1 VAV Box, !- Name
|
|
Retail_1_Flr_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Retail_1_Flr_1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Retail_2_Flr_1 VAV Box, !- Name
|
|
Retail_2_Flr_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Retail_2_Flr_1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Mech_Flr_1 VAV Box, !- Name
|
|
Mech_Flr_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Mech_Flr_1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Storage_Flr_1 VAV Box, !- Name
|
|
Storage_Flr_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Storage_Flr_1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Laundry_Flr_1 VAV Box, !- Name
|
|
Laundry_Flr_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Laundry_Flr_1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Cafe_Flr_1 VAV Box, !- Name
|
|
Cafe_Flr_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Cafe_Flr_1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Lobby_Flr_1 VAV Box, !- Name
|
|
Lobby_Flr_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Lobby_Flr_1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Corridor_Flr_3 VAV Box, !- Name
|
|
Corridor_Flr_3 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Corridor_Flr_3 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Banquet_Flr_6 VAV Box, !- Name
|
|
Banquet_Flr_6 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Banquet_Flr_6 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Dining_Flr_6 VAV Box, !- Name
|
|
Dining_Flr_6 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Dining_Flr_6 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Kitchen_Flr_6 VAV Box, !- Name
|
|
Kitchen_Flr_6 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Kitchen_Flr_6 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Corridor_Flr_6 VAV Box, !- Name
|
|
Corridor_Flr_6 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Corridor_Flr_6 VAV Box Component; !- Air Terminal Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ZONEHVAC:EQUIPMENTLIST ===========
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Basement Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Basement VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Retail_1_Flr_1 Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Retail_1_Flr_1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Retail_2_Flr_1 Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Retail_2_Flr_1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Mech_Flr_1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Mech_Flr_1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Storage_Flr_1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Storage_Flr_1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Laundry_Flr_1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
Fan:ZoneExhaust, !- Zone Equipment 1 Object Type
|
|
Laundry_Flr_1 Exhaust Fan, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 2 Object Type
|
|
Laundry_Flr_1 VAV Box, !- Zone Equipment 2 Name
|
|
2, !- Zone Equipment 2 Cooling Sequence
|
|
2; !- Zone Equipment 2 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Cafe_Flr_1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Cafe_Flr_1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Lobby_Flr_1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
Fan:ZoneExhaust, !- Zone Equipment 1 Object Type
|
|
Lobby_Flr_1 Dummy Exhaust Fan, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 2 Object Type
|
|
Lobby_Flr_1 VAV Box, !- Zone Equipment 2 Name
|
|
2, !- Zone Equipment 2 Cooling Sequence
|
|
2; !- Zone Equipment 2 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Room_1_Flr_3 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
|
|
Room_1_Flr_3 Direct Air, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
ZoneHVAC:FourPipeFanCoil,!- Zone Equipment 2 Object Type
|
|
Room_1_Flr_3 fan coil, !- Zone Equipment 2 Name
|
|
2, !- Zone Equipment 2 Cooling Sequence
|
|
2; !- Zone Equipment 2 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Room_2_Flr_3 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
|
|
Room_2_Flr_3 Direct Air, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
ZoneHVAC:FourPipeFanCoil,!- Zone Equipment 2 Object Type
|
|
Room_2_Flr_3 fan coil, !- Zone Equipment 2 Name
|
|
2, !- Zone Equipment 2 Cooling Sequence
|
|
2; !- Zone Equipment 2 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Room_3_Mult19_Flr_3 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
|
|
Room_3_Mult19_Flr_3 Direct Air, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
ZoneHVAC:FourPipeFanCoil,!- Zone Equipment 2 Object Type
|
|
Room_3_Mult19_Flr_3 fan coil, !- Zone Equipment 2 Name
|
|
2, !- Zone Equipment 2 Cooling Sequence
|
|
2; !- Zone Equipment 2 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Room_4_Mult19_Flr_3 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
|
|
Room_4_Mult19_Flr_3 Direct Air, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
ZoneHVAC:FourPipeFanCoil,!- Zone Equipment 2 Object Type
|
|
Room_4_Mult19_Flr_3 fan coil, !- Zone Equipment 2 Name
|
|
2, !- Zone Equipment 2 Cooling Sequence
|
|
2; !- Zone Equipment 2 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Room_5_Flr_3 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
|
|
Room_5_Flr_3 Direct Air, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
ZoneHVAC:FourPipeFanCoil,!- Zone Equipment 2 Object Type
|
|
Room_5_Flr_3 fan coil, !- Zone Equipment 2 Name
|
|
2, !- Zone Equipment 2 Cooling Sequence
|
|
2; !- Zone Equipment 2 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Room_6_Flr_3 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
|
|
Room_6_Flr_3 Direct Air, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
ZoneHVAC:FourPipeFanCoil,!- Zone Equipment 2 Object Type
|
|
Room_6_Flr_3 fan coil, !- Zone Equipment 2 Name
|
|
2, !- Zone Equipment 2 Cooling Sequence
|
|
2; !- Zone Equipment 2 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Corridor_Flr_3 Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Corridor_Flr_3 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Room_1_Flr_6 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
|
|
Room_1_Flr_6 Direct Air, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
ZoneHVAC:FourPipeFanCoil,!- Zone Equipment 2 Object Type
|
|
Room_1_Flr_6 fan coil, !- Zone Equipment 2 Name
|
|
2, !- Zone Equipment 2 Cooling Sequence
|
|
2; !- Zone Equipment 2 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Room_2_Flr_6 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
|
|
Room_2_Flr_6 Direct Air, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
ZoneHVAC:FourPipeFanCoil,!- Zone Equipment 2 Object Type
|
|
Room_2_Flr_6 fan coil, !- Zone Equipment 2 Name
|
|
2, !- Zone Equipment 2 Cooling Sequence
|
|
2; !- Zone Equipment 2 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Room_3_Mult9_Flr_6 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
|
|
Room_3_Mult9_Flr_6 Direct Air, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
ZoneHVAC:FourPipeFanCoil,!- Zone Equipment 2 Object Type
|
|
Room_3_Mult9_Flr_6 fan coil, !- Zone Equipment 2 Name
|
|
2, !- Zone Equipment 2 Cooling Sequence
|
|
2; !- Zone Equipment 2 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Banquet_Flr_6 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
Fan:ZoneExhaust, !- Zone Equipment 1 Object Type
|
|
BANQUET_FLR_6 Dummy Exhaust Fan, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 2 Object Type
|
|
Banquet_Flr_6 VAV Box, !- Zone Equipment 2 Name
|
|
2, !- Zone Equipment 2 Cooling Sequence
|
|
2; !- Zone Equipment 2 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Dining_Flr_6 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
Fan:ZoneExhaust, !- Zone Equipment 1 Object Type
|
|
Dining_Flr_6 Dummy Exhaust Fan, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 2 Object Type
|
|
Dining_Flr_6 VAV Box, !- Zone Equipment 2 Name
|
|
2, !- Zone Equipment 2 Cooling Sequence
|
|
2; !- Zone Equipment 2 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Kitchen_Flr_6 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
Fan:ZoneExhaust, !- Zone Equipment 1 Object Type
|
|
Kitchen_Flr_6 Exhaust Fan, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 2 Object Type
|
|
Kitchen_Flr_6 VAV Box, !- Zone Equipment 2 Name
|
|
2, !- Zone Equipment 2 Cooling Sequence
|
|
2; !- Zone Equipment 2 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Corridor_Flr_6 Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Corridor_Flr_6 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ZONEHVAC:EQUIPMENTCONNECTIONS ===========
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Basement, !- Zone Name
|
|
Basement Equipment, !- Zone Conditioning Equipment List Name
|
|
Basement Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Basement Air Node, !- Zone Air Node Name
|
|
Basement Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Retail_1_Flr_1, !- Zone Name
|
|
Retail_1_Flr_1 Equipment,!- Zone Conditioning Equipment List Name
|
|
Retail_1_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Retail_1_Flr_1 Air Node, !- Zone Air Node Name
|
|
Retail_1_Flr_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Retail_2_Flr_1, !- Zone Name
|
|
Retail_2_Flr_1 Equipment,!- Zone Conditioning Equipment List Name
|
|
Retail_2_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Retail_2_Flr_1 Air Node, !- Zone Air Node Name
|
|
Retail_2_Flr_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Mech_Flr_1, !- Zone Name
|
|
Mech_Flr_1 Equipment, !- Zone Conditioning Equipment List Name
|
|
Mech_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Mech_Flr_1 Air Node, !- Zone Air Node Name
|
|
Mech_Flr_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Storage_Flr_1, !- Zone Name
|
|
Storage_Flr_1 Equipment, !- Zone Conditioning Equipment List Name
|
|
Storage_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Storage_Flr_1 Air Node, !- Zone Air Node Name
|
|
Storage_Flr_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Laundry_Flr_1, !- Zone Name
|
|
Laundry_Flr_1 Equipment, !- Zone Conditioning Equipment List Name
|
|
Laundry_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
Laundry_Flr_1 Exhaust Nodes, !- Zone Air Exhaust Node or NodeList Name
|
|
Laundry_Flr_1 Air Node, !- Zone Air Node Name
|
|
Laundry_Flr_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Cafe_Flr_1, !- Zone Name
|
|
Cafe_Flr_1 Equipment, !- Zone Conditioning Equipment List Name
|
|
Cafe_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Cafe_Flr_1 Air Node, !- Zone Air Node Name
|
|
Cafe_Flr_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Lobby_Flr_1, !- Zone Name
|
|
Lobby_Flr_1 Equipment, !- Zone Conditioning Equipment List Name
|
|
Lobby_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
Lobby_Flr_1 Dummy Exhaust Fan Node, !- Zone Air Exhaust Node or NodeList Name
|
|
Lobby_Flr_1 Air Node, !- Zone Air Node Name
|
|
Lobby_Flr_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Room_1_Flr_3, !- Zone Name
|
|
Room_1_Flr_3 Equipment, !- Zone Conditioning Equipment List Name
|
|
Room_1_Flr_3 Inlet Nodes,!- Zone Air Inlet Node or NodeList Name
|
|
Room_1_Flr_3 Exhaust Nodes, !- Zone Air Exhaust Node or NodeList Name
|
|
Room_1_Flr_3 Air Node, !- Zone Air Node Name
|
|
Room_1_Flr_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Room_2_Flr_3, !- Zone Name
|
|
Room_2_Flr_3 Equipment, !- Zone Conditioning Equipment List Name
|
|
Room_2_Flr_3 Inlet Nodes,!- Zone Air Inlet Node or NodeList Name
|
|
Room_2_Flr_3 Exhaust Nodes, !- Zone Air Exhaust Node or NodeList Name
|
|
Room_2_Flr_3 Air Node, !- Zone Air Node Name
|
|
Room_2_Flr_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Room_3_Mult19_Flr_3, !- Zone Name
|
|
Room_3_Mult19_Flr_3 Equipment, !- Zone Conditioning Equipment List Name
|
|
Room_3_Mult19_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
Room_3_Mult19_Flr_3 Exhaust Nodes, !- Zone Air Exhaust Node or NodeList Name
|
|
Room_3_Mult19_Flr_3 Air Node, !- Zone Air Node Name
|
|
Room_3_Mult19_Flr_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Room_4_Mult19_Flr_3, !- Zone Name
|
|
Room_4_Mult19_Flr_3 Equipment, !- Zone Conditioning Equipment List Name
|
|
Room_4_Mult19_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
Room_4_Mult19_Flr_3 Exhaust Nodes, !- Zone Air Exhaust Node or NodeList Name
|
|
Room_4_Mult19_Flr_3 Air Node, !- Zone Air Node Name
|
|
Room_4_Mult19_Flr_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Room_5_Flr_3, !- Zone Name
|
|
Room_5_Flr_3 Equipment, !- Zone Conditioning Equipment List Name
|
|
Room_5_Flr_3 Inlet Nodes,!- Zone Air Inlet Node or NodeList Name
|
|
Room_5_Flr_3 Exhaust Nodes, !- Zone Air Exhaust Node or NodeList Name
|
|
Room_5_Flr_3 Air Node, !- Zone Air Node Name
|
|
Room_5_Flr_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Room_6_Flr_3, !- Zone Name
|
|
Room_6_Flr_3 Equipment, !- Zone Conditioning Equipment List Name
|
|
Room_6_Flr_3 Inlet Nodes,!- Zone Air Inlet Node or NodeList Name
|
|
Room_6_Flr_3 Exhaust Nodes, !- Zone Air Exhaust Node or NodeList Name
|
|
Room_6_Flr_3 Air Node, !- Zone Air Node Name
|
|
Room_6_Flr_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Corridor_Flr_3, !- Zone Name
|
|
Corridor_Flr_3 Equipment,!- Zone Conditioning Equipment List Name
|
|
Corridor_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Corridor_Flr_3 Air Node, !- Zone Air Node Name
|
|
Corridor_Flr_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Room_1_Flr_6, !- Zone Name
|
|
Room_1_Flr_6 Equipment, !- Zone Conditioning Equipment List Name
|
|
Room_1_Flr_6 Inlet Nodes,!- Zone Air Inlet Node or NodeList Name
|
|
Room_1_Flr_6 Exhaust Nodes, !- Zone Air Exhaust Node or NodeList Name
|
|
Room_1_Flr_6 Air Node, !- Zone Air Node Name
|
|
Room_1_Flr_6 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Room_2_Flr_6, !- Zone Name
|
|
Room_2_Flr_6 Equipment, !- Zone Conditioning Equipment List Name
|
|
Room_2_Flr_6 Inlet Nodes,!- Zone Air Inlet Node or NodeList Name
|
|
Room_2_Flr_6 Exhaust Nodes, !- Zone Air Exhaust Node or NodeList Name
|
|
Room_2_Flr_6 Air Node, !- Zone Air Node Name
|
|
Room_2_Flr_6 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Room_3_Mult9_Flr_6, !- Zone Name
|
|
Room_3_Mult9_Flr_6 Equipment, !- Zone Conditioning Equipment List Name
|
|
Room_3_Mult9_Flr_6 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
Room_3_Mult9_Flr_6 Exhaust Nodes, !- Zone Air Exhaust Node or NodeList Name
|
|
Room_3_Mult9_Flr_6 Air Node, !- Zone Air Node Name
|
|
Room_3_Mult9_Flr_6 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Banquet_Flr_6, !- Zone Name
|
|
Banquet_Flr_6 Equipment, !- Zone Conditioning Equipment List Name
|
|
Banquet_Flr_6 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
BANQUET_FLR_6 Dummy Exhaust Fan Node, !- Zone Air Exhaust Node or NodeList Name
|
|
Banquet_Flr_6 Air Node, !- Zone Air Node Name
|
|
Banquet_Flr_6 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Dining_Flr_6, !- Zone Name
|
|
Dining_Flr_6 Equipment, !- Zone Conditioning Equipment List Name
|
|
Dining_Flr_6 Inlet Nodes,!- Zone Air Inlet Node or NodeList Name
|
|
Dining_Flr_6 Dummy Exhaust Fan Node, !- Zone Air Exhaust Node or NodeList Name
|
|
Dining_Flr_6 Air Node, !- Zone Air Node Name
|
|
Dining_Flr_6 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Kitchen_Flr_6, !- Zone Name
|
|
Kitchen_Flr_6 Equipment, !- Zone Conditioning Equipment List Name
|
|
Kitchen_Flr_6 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
Kitchen_Flr_6 Exhaust Nodes, !- Zone Air Exhaust Node or NodeList Name
|
|
Kitchen_Flr_6 Air Node, !- Zone Air Node Name
|
|
Kitchen_Flr_6 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Corridor_Flr_6, !- Zone Name
|
|
Corridor_Flr_6 Equipment,!- Zone Conditioning Equipment List Name
|
|
Corridor_Flr_6 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Corridor_Flr_6 Air Node, !- Zone Air Node Name
|
|
Corridor_Flr_6 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: FAN:CONSTANTVOLUME ===========
|
|
|
|
Fan:OnOff,
|
|
Room_1_Flr_3 fan coilfan,!- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
0.385, !- Fan Total Efficiency
|
|
270.9, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
0.7, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
Room_1_Flr_3 fan coilOA mix outlet node, !- Air Inlet Node Name
|
|
Room_1_Flr_3 fan coilfan outlet node; !- Air Outlet Node Name
|
|
|
|
Fan:OnOff,
|
|
Room_2_Flr_3 fan coilfan,!- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
0.385, !- Fan Total Efficiency
|
|
270.9, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
0.7, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
Room_2_Flr_3 fan coilOA mix outlet node, !- Air Inlet Node Name
|
|
Room_2_Flr_3 fan coilfan outlet node; !- Air Outlet Node Name
|
|
|
|
Fan:OnOff,
|
|
Room_3_Mult19_Flr_3 fan coilfan, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
0.385, !- Fan Total Efficiency
|
|
270.9, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
0.7, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
Room_3_Mult19_Flr_3 fan coilOA mix outlet node, !- Air Inlet Node Name
|
|
Room_3_Mult19_Flr_3 fan coilfan outlet node; !- Air Outlet Node Name
|
|
|
|
Fan:OnOff,
|
|
Room_4_Mult19_Flr_3 fan coilfan, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
0.385, !- Fan Total Efficiency
|
|
270.9, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
0.7, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
Room_4_Mult19_Flr_3 fan coilOA mix outlet node, !- Air Inlet Node Name
|
|
Room_4_Mult19_Flr_3 fan coilfan outlet node; !- Air Outlet Node Name
|
|
|
|
Fan:OnOff,
|
|
Room_5_Flr_3 fan coilfan,!- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
0.385, !- Fan Total Efficiency
|
|
270.9, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
0.7, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
Room_5_Flr_3 fan coilOA mix outlet node, !- Air Inlet Node Name
|
|
Room_5_Flr_3 fan coilfan outlet node; !- Air Outlet Node Name
|
|
|
|
Fan:OnOff,
|
|
Room_6_Flr_3 fan coilfan,!- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
0.385, !- Fan Total Efficiency
|
|
270.9, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
0.7, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
Room_6_Flr_3 fan coilOA mix outlet node, !- Air Inlet Node Name
|
|
Room_6_Flr_3 fan coilfan outlet node; !- Air Outlet Node Name
|
|
|
|
Fan:OnOff,
|
|
Room_1_Flr_6 fan coilfan,!- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
0.385, !- Fan Total Efficiency
|
|
270.9, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
0.7, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
Room_1_Flr_6 fan coilOA mix outlet node, !- Air Inlet Node Name
|
|
Room_1_Flr_6 fan coilfan outlet node; !- Air Outlet Node Name
|
|
|
|
Fan:OnOff,
|
|
Room_2_Flr_6 fan coilfan,!- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
0.385, !- Fan Total Efficiency
|
|
270.9, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
0.7, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
Room_2_Flr_6 fan coilOA mix outlet node, !- Air Inlet Node Name
|
|
Room_2_Flr_6 fan coilfan outlet node; !- Air Outlet Node Name
|
|
|
|
Fan:OnOff,
|
|
Room_3_Mult9_Flr_6 fan coilfan, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
0.385, !- Fan Total Efficiency
|
|
270.9, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
0.7, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
Room_3_Mult9_Flr_6 fan coilOA mix outlet node, !- Air Inlet Node Name
|
|
Room_3_Mult9_Flr_6 fan coilfan outlet node; !- Air Outlet Node Name
|
|
|
|
|
|
|
|
Fan:ConstantVolume,
|
|
FLR_3_DOAS_Fan, !- Name
|
|
HVACOperationSchd, !- Availability Schedule Name
|
|
0.58175, !- Fan Total Efficiency
|
|
622.5, !- Pressure Rise {Pa}
|
|
2.051199045, !- Maximum Flow Rate {m3/s}
|
|
0.895, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
FLR_3_DOAS_HeatC-FLR_3_DOAS_FanNode, !- Air Inlet Node Name
|
|
FLR_3_DOAS Supply Equipment Outlet Node, !- Air Outlet Node Name
|
|
General; !- End-Use Subcategory
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: FAN:VARIABLEVOLUME ===========
|
|
|
|
Fan:VariableVolume,
|
|
VAV WITH REHEAT_Fan, !- Name
|
|
HVACOperationSchd, !- Availability Schedule Name
|
|
0.6201, !- Fan Total Efficiency
|
|
1389.42, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
FixedFlowRate, !- Fan Power Minimum Flow Rate Input Method
|
|
, !- Fan Power Minimum Flow Fraction
|
|
0.0000, !- Fan Power Minimum Air Flow Rate {m3/s}
|
|
0.954, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
0.0408, !- Fan Power Coefficient 1
|
|
0.088, !- Fan Power Coefficient 2
|
|
-0.0729, !- Fan Power Coefficient 3
|
|
0.9437, !- Fan Power Coefficient 4
|
|
0, !- Fan Power Coefficient 5
|
|
VAV WITH REHEAT_HeatC-VAV WITH REHEAT_FanNode, !- Air Inlet Node Name
|
|
VAV WITH REHEAT Supply Equipment Outlet Node, !- Air Outlet Node Name
|
|
General; !- End-Use Subcategory
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: FAN:ZONEEXHAUST ===========
|
|
|
|
Fan:ZoneExhaust,
|
|
Laundry_Flr_1 Exhaust Fan, !- Name
|
|
Hours_of_operation, !- Availability Schedule Name
|
|
0.385, !- Fan Total Efficiency
|
|
125.0000, !- Pressure Rise {Pa}
|
|
0.235973721966322, !- Maximum Flow Rate {m3/s}
|
|
Laundry_Flr_1 Exhaust Fan Node, !- Air Inlet Node Name
|
|
Laundry_Flr_1 Exhaust Fan Outlet Node Name, !- Air Outlet Node Name
|
|
General, !- End-Use Subcategory
|
|
, !- Flow Fraction Schedule Name
|
|
, !- System Availability Manager Coupling Mode
|
|
, !- Minimum Zone Temperature Limit Schedule Name
|
|
Laundry_Flr_1 Exhaust Fan Balanced Exhaust Fraction Schedule; !- Balanced Exhaust Fraction Schedule Name
|
|
|
|
Schedule:Compact,
|
|
Laundry_Flr_1 Exhaust Fan Balanced Exhaust Fraction Schedule, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1; !- Field 3
|
|
|
|
Fan:ZoneExhaust,
|
|
Lobby_Flr_1 Dummy Exhaust Fan, !- Name
|
|
Hours_of_operation, !- Availability Schedule Name
|
|
1.0000, !- Fan Total Efficiency
|
|
0, !- Pressure Rise {Pa}
|
|
0.235973721966322, !- Maximum Flow Rate {m3/s}
|
|
Lobby_Flr_1 Dummy Exhaust Fan Node, !- Air Inlet Node Name
|
|
Lobby_Flr_1 Dummy Exhaust Fan Outlet Node Name, !- Air Outlet Node Name
|
|
General; !- End-Use Subcategory
|
|
|
|
Fan:ZoneExhaust,
|
|
Dining_Flr_6 Dummy Exhaust Fan, !- Name
|
|
Kitchen_Exhaust_SCH, !- Availability Schedule Name
|
|
1.0000, !- Fan Total Efficiency
|
|
0, !- Pressure Rise {Pa}
|
|
0.873102771275391, !- Maximum Flow Rate {m3/s}
|
|
Dining_Flr_6 Dummy Exhaust Fan Node, !- Air Inlet Node Name
|
|
Dining_Flr_6 Dummy Exhaust Fan Outlet Node Name, !- Air Outlet Node Name
|
|
General; !- End-Use Subcategory
|
|
|
|
Fan:ZoneExhaust,
|
|
BANQUET_FLR_6 Dummy Exhaust Fan, !- Name
|
|
Kitchen_Exhaust_SCH, !- Availability Schedule Name
|
|
1.0000, !- Fan Total Efficiency
|
|
0, !- Pressure Rise {Pa}
|
|
0.873102771275391, !- Maximum Flow Rate {m3/s}
|
|
BANQUET_FLR_6 Dummy Exhaust Fan Node, !- Air Inlet Node Name
|
|
BANQUET_FLR_6 Dummy Exhaust Fan Outlet Node Name, !- Air Outlet Node Name
|
|
General; !- End-Use Subcategory
|
|
|
|
Fan:ZoneExhaust,
|
|
Kitchen_Flr_6 Exhaust Fan, !- Name
|
|
Kitchen_Exhaust_SCH, !- Availability Schedule Name
|
|
0.385, !- Fan Total Efficiency
|
|
125.0000, !- Pressure Rise {Pa}
|
|
1.88778977573057, !- Maximum Flow Rate {m3/s}
|
|
Kitchen_Flr_6 Exhaust Fan Node, !- Air Inlet Node Name
|
|
Kitchen_Flr_6 Exhaust Fan Outlet Node Name, !- Air Outlet Node Name
|
|
General, !- End-Use Subcategory
|
|
, !- Flow Fraction Schedule Name
|
|
, !- System Availability Manager Coupling Mode
|
|
, !- Minimum Zone Temperature Limit Schedule Name
|
|
Kitchen Exhaust Fan Balanced Exhaust Fraction Schedule; !- Balanced Exhaust Fraction Schedule Name
|
|
|
|
Schedule:Compact,
|
|
Kitchen Exhaust Fan Balanced Exhaust Fraction Schedule, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 07:00,0, !- Field 3
|
|
Until: 24:00, 0.925 ; !- Field 5
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: COIL:COOLING:WATER ===========
|
|
|
|
Coil:Cooling:Water,
|
|
Room_1_Flr_3 fan coilCool Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- Design Water Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Inlet Water Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Outlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
Room_1_Flr_3 fan coilCool CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Room_1_Flr_3 fan coilCool CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Room_1_Flr_3 fan coilfan outlet node, !- Air Inlet Node Name
|
|
Room_1_Flr_3 fan coilcoolC air outlet node, !- Air Outlet Node Name
|
|
SimpleAnalysis, !- Type of Analysis
|
|
CrossFlow; !- Heat Exchanger Configuration
|
|
|
|
Coil:Cooling:Water,
|
|
Room_2_Flr_3 fan coilCool Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- Design Water Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Inlet Water Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Outlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
Room_2_Flr_3 fan coilCool CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Room_2_Flr_3 fan coilCool CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Room_2_Flr_3 fan coilfan outlet node, !- Air Inlet Node Name
|
|
Room_2_Flr_3 fan coilcoolC air outlet node, !- Air Outlet Node Name
|
|
SimpleAnalysis, !- Type of Analysis
|
|
CrossFlow; !- Heat Exchanger Configuration
|
|
|
|
Coil:Cooling:Water,
|
|
Room_3_Mult19_Flr_3 fan coilCool Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- Design Water Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Inlet Water Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Outlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
Room_3_Mult19_Flr_3 fan coilCool CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Room_3_Mult19_Flr_3 fan coilCool CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Room_3_Mult19_Flr_3 fan coilfan outlet node, !- Air Inlet Node Name
|
|
Room_3_Mult19_Flr_3 fan coilcoolC air outlet node, !- Air Outlet Node Name
|
|
SimpleAnalysis, !- Type of Analysis
|
|
CrossFlow; !- Heat Exchanger Configuration
|
|
|
|
Coil:Cooling:Water,
|
|
Room_4_Mult19_Flr_3 fan coilCool Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- Design Water Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Inlet Water Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Outlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
Room_4_Mult19_Flr_3 fan coilCool CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Room_4_Mult19_Flr_3 fan coilCool CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Room_4_Mult19_Flr_3 fan coilfan outlet node, !- Air Inlet Node Name
|
|
Room_4_Mult19_Flr_3 fan coilcoolC air outlet node, !- Air Outlet Node Name
|
|
SimpleAnalysis, !- Type of Analysis
|
|
CrossFlow; !- Heat Exchanger Configuration
|
|
|
|
Coil:Cooling:Water,
|
|
Room_5_Flr_3 fan coilCool Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- Design Water Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Inlet Water Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Outlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
Room_5_Flr_3 fan coilCool CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Room_5_Flr_3 fan coilCool CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Room_5_Flr_3 fan coilfan outlet node, !- Air Inlet Node Name
|
|
Room_5_Flr_3 fan coilcoolC air outlet node, !- Air Outlet Node Name
|
|
SimpleAnalysis, !- Type of Analysis
|
|
CrossFlow; !- Heat Exchanger Configuration
|
|
|
|
Coil:Cooling:Water,
|
|
Room_6_Flr_3 fan coilCool Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- Design Water Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Inlet Water Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Outlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
Room_6_Flr_3 fan coilCool CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Room_6_Flr_3 fan coilCool CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Room_6_Flr_3 fan coilfan outlet node, !- Air Inlet Node Name
|
|
Room_6_Flr_3 fan coilcoolC air outlet node, !- Air Outlet Node Name
|
|
SimpleAnalysis, !- Type of Analysis
|
|
CrossFlow; !- Heat Exchanger Configuration
|
|
|
|
Coil:Cooling:Water,
|
|
Room_1_Flr_6 fan coilCool Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- Design Water Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Inlet Water Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Outlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
Room_1_Flr_6 fan coilCool CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Room_1_Flr_6 fan coilCool CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Room_1_Flr_6 fan coilfan outlet node, !- Air Inlet Node Name
|
|
Room_1_Flr_6 fan coilcoolC air outlet node, !- Air Outlet Node Name
|
|
SimpleAnalysis, !- Type of Analysis
|
|
CrossFlow; !- Heat Exchanger Configuration
|
|
|
|
Coil:Cooling:Water,
|
|
Room_2_Flr_6 fan coilCool Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- Design Water Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Inlet Water Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Outlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
Room_2_Flr_6 fan coilCool CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Room_2_Flr_6 fan coilCool CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Room_2_Flr_6 fan coilfan outlet node, !- Air Inlet Node Name
|
|
Room_2_Flr_6 fan coilcoolC air outlet node, !- Air Outlet Node Name
|
|
SimpleAnalysis, !- Type of Analysis
|
|
CrossFlow; !- Heat Exchanger Configuration
|
|
|
|
Coil:Cooling:Water,
|
|
Room_3_Mult9_Flr_6 fan coilCool Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- Design Water Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Inlet Water Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Outlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
Room_3_Mult9_Flr_6 fan coilCool CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Room_3_Mult9_Flr_6 fan coilCool CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Room_3_Mult9_Flr_6 fan coilfan outlet node, !- Air Inlet Node Name
|
|
Room_3_Mult9_Flr_6 fan coilcoolC air outlet node, !- Air Outlet Node Name
|
|
SimpleAnalysis, !- Type of Analysis
|
|
CrossFlow; !- Heat Exchanger Configuration
|
|
|
|
Coil:Cooling:Water,
|
|
VAV WITH REHEAT_CoolC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- Design Water Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Inlet Water Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Outlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
VAV WITH REHEAT_CoolCDemand Inlet Node, !- Water Inlet Node Name
|
|
VAV WITH REHEAT_CoolCDemand Outlet Node, !- Water Outlet Node Name
|
|
VAV WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Air Inlet Node Name
|
|
VAV WITH REHEAT_CoolC-VAV WITH REHEAT_HeatCNode, !- Air Outlet Node Name
|
|
SimpleAnalysis, !- Type of Analysis
|
|
CrossFlow; !- Heat Exchanger Configuration
|
|
|
|
Coil:Cooling:Water,
|
|
FLR_3_DOAS_CoolC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- Design Water Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Inlet Water Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Outlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
FLR_3_DOAS_CoolCDemand Inlet Node, !- Water Inlet Node Name
|
|
FLR_3_DOAS_CoolCDemand Outlet Node, !- Water Outlet Node Name
|
|
FLR_3_DOAS_OA-FLR_3_DOAS_CoolCNode, !- Air Inlet Node Name
|
|
FLR_3_DOAS_CoolC-FLR_3_DOAS_HeatCNode, !- Air Outlet Node Name
|
|
SimpleAnalysis, !- Type of Analysis
|
|
CrossFlow; !- Heat Exchanger Configuration
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: COIL:HEATING:WATER ===========
|
|
|
|
Coil:Heating:Water,
|
|
Basement VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Basement VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Basement VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Basement VAV Box Damper Node, !- Air Inlet Node Name
|
|
Basement VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Retail_1_Flr_1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Retail_1_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Retail_1_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Retail_1_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Retail_1_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Retail_2_Flr_1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Retail_2_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Retail_2_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Retail_2_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Retail_2_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Mech_Flr_1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Mech_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Mech_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Mech_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Mech_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Storage_Flr_1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Storage_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Storage_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Storage_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Storage_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Laundry_Flr_1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Laundry_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Laundry_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Laundry_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Laundry_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Cafe_Flr_1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Cafe_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Cafe_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Cafe_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Cafe_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Lobby_Flr_1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Lobby_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Lobby_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Lobby_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Lobby_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Room_1_Flr_3 fan coilHeat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Room_1_Flr_3 fan coilHeat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Room_1_Flr_3 fan coilHeat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Room_1_Flr_3 fan coilcoolC air outlet node, !- Air Inlet Node Name
|
|
Room_1_Flr_3 FCU Exhaust Node, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Room_2_Flr_3 fan coilHeat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Room_2_Flr_3 fan coilHeat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Room_2_Flr_3 fan coilHeat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Room_2_Flr_3 fan coilcoolC air outlet node, !- Air Inlet Node Name
|
|
Room_2_Flr_3 FCU Exhaust Node, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Room_3_Mult19_Flr_3 fan coilHeat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Room_3_Mult19_Flr_3 fan coilHeat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Room_3_Mult19_Flr_3 fan coilHeat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Room_3_Mult19_Flr_3 fan coilcoolC air outlet node, !- Air Inlet Node Name
|
|
Room_3_Mult19_Flr_3 FCU Exhaust Node, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Room_4_Mult19_Flr_3 fan coilHeat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Room_4_Mult19_Flr_3 fan coilHeat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Room_4_Mult19_Flr_3 fan coilHeat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Room_4_Mult19_Flr_3 fan coilcoolC air outlet node, !- Air Inlet Node Name
|
|
Room_4_Mult19_Flr_3 FCU Exhaust Node, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Room_5_Flr_3 fan coilHeat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Room_5_Flr_3 fan coilHeat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Room_5_Flr_3 fan coilHeat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Room_5_Flr_3 fan coilcoolC air outlet node, !- Air Inlet Node Name
|
|
Room_5_Flr_3 FCU Exhaust Node, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Room_6_Flr_3 fan coilHeat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Room_6_Flr_3 fan coilHeat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Room_6_Flr_3 fan coilHeat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Room_6_Flr_3 fan coilcoolC air outlet node, !- Air Inlet Node Name
|
|
Room_6_Flr_3 FCU Exhaust Node, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Corridor_Flr_3 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Corridor_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Corridor_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Corridor_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Corridor_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Room_1_Flr_6 fan coilHeat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Room_1_Flr_6 fan coilHeat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Room_1_Flr_6 fan coilHeat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Room_1_Flr_6 fan coilcoolC air outlet node, !- Air Inlet Node Name
|
|
Room_1_Flr_6 FCU Exhaust Node, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Room_2_Flr_6 fan coilHeat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Room_2_Flr_6 fan coilHeat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Room_2_Flr_6 fan coilHeat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Room_2_Flr_6 fan coilcoolC air outlet node, !- Air Inlet Node Name
|
|
Room_2_Flr_6 FCU Exhaust Node, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Room_3_Mult9_Flr_6 fan coilHeat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Room_3_Mult9_Flr_6 fan coilHeat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Room_3_Mult9_Flr_6 fan coilHeat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Room_3_Mult9_Flr_6 fan coilcoolC air outlet node, !- Air Inlet Node Name
|
|
Room_3_Mult9_Flr_6 FCU Exhaust Node, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Banquet_Flr_6 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Banquet_Flr_6 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Banquet_Flr_6 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Banquet_Flr_6 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Banquet_Flr_6 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Dining_Flr_6 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Dining_Flr_6 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Dining_Flr_6 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Dining_Flr_6 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Dining_Flr_6 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Kitchen_Flr_6 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Kitchen_Flr_6 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Kitchen_Flr_6 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Kitchen_Flr_6 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Kitchen_Flr_6 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Corridor_Flr_6 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Corridor_Flr_6 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Corridor_Flr_6 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Corridor_Flr_6 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Corridor_Flr_6 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
VAV WITH REHEAT_HeatC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
VAV WITH REHEAT_HeatCDemand Inlet Node, !- Water Inlet Node Name
|
|
VAV WITH REHEAT_HeatCDemand Outlet Node, !- Water Outlet Node Name
|
|
VAV WITH REHEAT_CoolC-VAV WITH REHEAT_HeatCNode, !- Air Inlet Node Name
|
|
VAV WITH REHEAT_HeatC-VAV WITH REHEAT_FanNode, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
FLR_3_DOAS_HeatC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
FLR_3_DOAS_HeatCDemand Inlet Node, !- Water Inlet Node Name
|
|
FLR_3_DOAS_HeatCDemand Outlet Node, !- Water Outlet Node Name
|
|
FLR_3_DOAS_CoolC-FLR_3_DOAS_HeatCNode, !- Air Inlet Node Name
|
|
FLR_3_DOAS_HeatC-FLR_3_DOAS_FanNode, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CONTROLLER:WATERCOIL ===========
|
|
|
|
Controller:WaterCoil,
|
|
VAV WITH REHEAT_CoolC_Controller, !- Name
|
|
Temperature, !- Control Variable
|
|
Reverse, !- Action
|
|
Flow, !- Actuator Variable
|
|
VAV WITH REHEAT_CoolC-VAV WITH REHEAT_HeatCNode, !- Sensor Node Name
|
|
VAV WITH REHEAT_CoolCDemand Inlet Node, !- Actuator Node Name
|
|
, !- Controller Convergence Tolerance {deltaC}
|
|
AUTOSIZE, !- Maximum Actuated Flow {m3/s}
|
|
0.0; !- Minimum Actuated Flow {m3/s}
|
|
|
|
Controller:WaterCoil,
|
|
VAV WITH REHEAT_HeatC_Controller, !- Name
|
|
Temperature, !- Control Variable
|
|
Normal, !- Action
|
|
Flow, !- Actuator Variable
|
|
VAV WITH REHEAT_HeatC-VAV WITH REHEAT_FanNode, !- Sensor Node Name
|
|
VAV WITH REHEAT_HeatCDemand Inlet Node, !- Actuator Node Name
|
|
0.0001, !- Controller Convergence Tolerance {deltaC}
|
|
AUTOSIZE, !- Maximum Actuated Flow {m3/s}
|
|
0.0; !- Minimum Actuated Flow {m3/s}
|
|
|
|
Controller:WaterCoil,
|
|
FLR_3_DOAS_CoolC_Controller, !- Name
|
|
Temperature, !- Control Variable
|
|
Reverse, !- Action
|
|
Flow, !- Actuator Variable
|
|
FLR_3_DOAS_CoolC-FLR_3_DOAS_HeatCNode, !- Sensor Node Name
|
|
FLR_3_DOAS_CoolCDemand Inlet Node, !- Actuator Node Name
|
|
, !- Controller Convergence Tolerance {deltaC}
|
|
AUTOSIZE, !- Maximum Actuated Flow {m3/s}
|
|
0.0; !- Minimum Actuated Flow {m3/s}
|
|
|
|
Controller:WaterCoil,
|
|
FLR_3_DOAS_HeatC_Controller, !- Name
|
|
Temperature, !- Control Variable
|
|
Normal, !- Action
|
|
Flow, !- Actuator Variable
|
|
FLR_3_DOAS_HeatC-FLR_3_DOAS_FanNode, !- Sensor Node Name
|
|
FLR_3_DOAS_HeatCDemand Inlet Node, !- Actuator Node Name
|
|
0.0001, !- Controller Convergence Tolerance {deltaC}
|
|
AUTOSIZE, !- Maximum Actuated Flow {m3/s}
|
|
0.0; !- Minimum Actuated Flow {m3/s}
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CONTROLLER:OUTDOORAIR ===========
|
|
|
|
Controller:OutdoorAir,
|
|
VAV WITH REHEAT_OA_Controller, !- Name
|
|
VAV WITH REHEAT_OARelief Node, !- Relief Air Outlet Node Name
|
|
VAV WITH REHEAT Supply Equipment Inlet Node, !- Return Air Node Name
|
|
VAV WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Mixed Air Node Name
|
|
VAV WITH REHEAT_OAInlet Node, !- Actuator Node Name
|
|
0, !- Minimum Outdoor Air Flow Rate {m3/s}
|
|
|
|
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
DifferentialDryBulb, !- Economizer Control Type
|
|
ModulateFlow, !- Economizer Control Action Type
|
|
, !- Economizer Maximum Limit Dry-Bulb Temperature {C} Economizer Maximum Limit Dry-Bulb Temperature {C} !-
|
|
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
|
|
, !- Economizer Maximum Limit Dewpoint Temperature {C}
|
|
, !- Electronic Enthalpy Limit Curve Name
|
|
, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
|
|
LockoutWithHeating, !- Lockout Type
|
|
FixedMinimum, !- Minimum Limit Type
|
|
MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name
|
|
, !- Minimum Fraction of Outdoor Air Schedule Name
|
|
VAV WITH REHEAT Max OA Fraction, !- Maximum Fraction of Outdoor Air Schedule Name
|
|
|
|
VAV_WITH_REHEAT_DCV, !- Mechanical Ventilation Controller Name
|
|
, !- Time of Day Economizer Control Schedule Name
|
|
, !- High Humidity Control
|
|
, !- Humidistat Control Zone Name
|
|
, !- High Humidity Outdoor Air Flow Ratio
|
|
, !- Control High Indoor Humidity Based on Outdoor Humidity Ratio
|
|
BypassWhenWithinEconomizerLimits;
|
|
|
|
|
|
Controller:OutdoorAir,
|
|
FLR_3_DOAS_OA_Controller,!- Name
|
|
FLR_3_DOAS_OARelief Node,!- Relief Air Outlet Node Name
|
|
FLR_3_DOAS Supply Equipment Inlet Node, !- Return Air Node Name
|
|
FLR_3_DOAS_OA-FLR_3_DOAS_CoolCNode, !- Mixed Air Node Name
|
|
FLR_3_DOAS_OAInlet Node, !- Actuator Node Name
|
|
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
DifferentialDrybulb, !- Economizer Control Type
|
|
ModulateFlow, !- Economizer Control Action Type
|
|
, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
|
|
, !- Economizer Maximum Limit Enthalpy {J/kg}
|
|
, !- Economizer Maximum Limit Dewpoint Temperature {C}
|
|
, !- Electronic Enthalpy Limit Curve Name
|
|
, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
|
|
LockoutWithHeating, !- Lockout Type
|
|
FixedMinimum, !- Minimum Limit Type
|
|
MinOA_Sched, !- Minimum Outdoor Air Schedule Name
|
|
FLR_3_DOAS_OAminOAFracSchedule, !- Minimum Fraction of Outdoor Air Schedule Name
|
|
, !- Maximum Fraction of Outdoor Air Schedule Name
|
|
, !- Mechanical Ventilation Controller Name
|
|
, !- Time of Day Economizer Control Schedule Name
|
|
, !- High Humidity Control
|
|
, !- Humidistat Control Zone Name
|
|
, !- High Humidity Outdoor Air Flow Ratio
|
|
, !- Control High Indoor Humidity Based on Outdoor Humidity Ratio
|
|
BypassWhenWithinEconomizerLimits;
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CONTROLLER:MechanicalVentilation ===========
|
|
|
|
Controller:MechanicalVentilation,
|
|
VAV_WITH_REHEAT_DCV, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
No, !- Demand Controlled Ventilation
|
|
VentilationRateProcedure,!- System Outdoor Air Method
|
|
, !- Zone Maximum Outdoor Air Fraction {dimensionless}
|
|
|
|
Basement, !- Zone 1 Name
|
|
CM DSOA Basement, !- Design Specification Outdoor Air Object Name
|
|
CM DSZAD Basement, !- Design Specification Zone Air Distribution Object Name
|
|
Retail_1_Flr_1, !- Zone 1 Name
|
|
CM DSOA Retail_1_Flr_1, !- Design Specification Outdoor Air Object Name
|
|
CM DSZAD Retail_1_Flr_1, !- Design Specification Zone Air Distribution Object Name
|
|
Retail_2_Flr_1, !- Zone 2 Name
|
|
CM DSOA Retail_2_Flr_1, !- Design Specification Outdoor Air Object Name
|
|
CM DSZAD Retail_2_Flr_1, !- Design Specification Zone Air Distribution Object Name
|
|
Mech_Flr_1, !- Zone 1 Name
|
|
CM DSOA Mech_Flr_1, !- Design Specification Outdoor Air Object Name
|
|
CM DSZAD Mech_Flr_1, !- Design Specification Zone Air Distribution Object Name
|
|
Storage_Flr_1, !- Zone 4 Name
|
|
CM DSOA Storage_Flr_1, !- Design Specification Outdoor Air Object Name
|
|
CM DSZAD Storage_Flr_1, !- Design Specification Zone Air Distribution Object Name
|
|
Laundry_Flr_1, !- Zone 1 Name
|
|
CM DSOA Laundry_Flr_1, !- Design Specification Outdoor Air Object Name
|
|
CM DSZAD Laundry_Flr_1, !- Design Specification Zone Air Distribution Object Name
|
|
Cafe_Flr_1, !- Zone 6 Name
|
|
CM DSOA Cafe_Flr_1, !- Design Specification Outdoor Air Object Name
|
|
CM DSZAD Cafe_Flr_1, !- Design Specification Zone Air Distribution Object Name
|
|
Lobby_Flr_1, !- Zone 7 Name
|
|
CM DSOA Lobby_Flr_1, !- Design Specification Outdoor Air Object Name
|
|
CM DSZAD Lobby_Flr_1, !- Design Specification Zone Air Distribution Object Name
|
|
Corridor_Flr_3, !- Zone 8 Name
|
|
CM DSOA Corridor_Flr_3, !- Design Specification Outdoor Air Object Name
|
|
CM DSZAD Corridor_Flr_3, !- Design Specification Zone Air Distribution Object Name
|
|
Banquet_Flr_6, !- Zone 9 Name
|
|
CM DSOA Banquet_Flr_6, !- Design Specification Outdoor Air Object Name
|
|
CM DSZAD Banquet_Flr_6, !- Design Specification Zone Air Distribution Object Name
|
|
Dining_Flr_6, !- Zone 10 Name
|
|
CM DSOA Dining_Flr_6, !- Design Specification Outdoor Air Object Name
|
|
CM DSZAD Dining_Flr_6, !- Design Specification Zone Air Distribution Object Name
|
|
Corridor_Flr_6, !- Zone 12 Name
|
|
CM DSOA Corridor_Flr_6, !- Design Specification Outdoor Air Object Name
|
|
CM DSZAD Corridor_Flr_6, !- Design Specification Zone Air Distribution Object Name
|
|
Kitchen_Flr_6, !- Zone 11 Name
|
|
CM DSOA Kitchen_Flr_6, !- Design Specification Outdoor Air Object Name
|
|
CM DSZAD Kitchen_Flr_6; !- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Basement, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Retail_1_Flr_1, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Retail_2_Flr_1, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Mech_Flr_1, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Storage_Flr_1, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Laundry_Flr_1, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Cafe_Flr_1, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Lobby_Flr_1, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Corridor_Flr_3, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Banquet_Flr_6, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Dining_Flr_6, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Corridor_Flr_6, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Kitchen_Flr_6, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Basement, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431633; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Retail_1_Flr_1, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.001180644; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Retail_2_Flr_1, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.001180644; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Mech_Flr_1, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Storage_Flr_1, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000609365; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Laundry_Flr_1, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Cafe_Flr_1, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0.00354, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000914047; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Lobby_Flr_1, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s}
|
|
0.001447242; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Corridor_Flr_3, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000304682; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Banquet_Flr_6, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.003580019; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Dining_Flr_6, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.003580019; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Corridor_Flr_6, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000304682; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Kitchen_Flr_6, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.003554628; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:CONTROLLERLIST ===========
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
VAV WITH REHEAT_Controllers, !- Name
|
|
Controller:WaterCoil, !- Controller 1 Object Type
|
|
VAV WITH REHEAT_CoolC_Controller, !- Controller 1 Name
|
|
Controller:WaterCoil, !- Controller 2 Object Type
|
|
VAV WITH REHEAT_HeatC_Controller; !- Controller 2 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
VAV WITH REHEAT_OA_Controllers, !- Name
|
|
Controller:OutdoorAir, !- Controller 1 Object Type
|
|
VAV WITH REHEAT_OA_Controller; !- Controller 1 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
FLR_3_DOAS_Controllers, !- Name
|
|
Controller:WaterCoil, !- Controller 1 Object Type
|
|
FLR_3_DOAS_CoolC_Controller, !- Controller 1 Name
|
|
Controller:WaterCoil, !- Controller 2 Object Type
|
|
FLR_3_DOAS_HeatC_Controller; !- Controller 2 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
FLR_3_DOAS_OA_Controllers, !- Name
|
|
Controller:OutdoorAir, !- Controller 1 Object Type
|
|
FLR_3_DOAS_OA_Controller;!- Controller 1 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC ===========
|
|
|
|
AirLoopHVAC,
|
|
VAV WITH REHEAT, !- Name
|
|
VAV WITH REHEAT_Controllers, !- Controller List Name
|
|
VAV WITH REHEAT Availability Manager List, !- Availability Manager List Name
|
|
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
|
|
VAV WITH REHEAT Air Loop Branches, !- Branch List Name
|
|
, !- Connector List Name
|
|
VAV WITH REHEAT Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
|
|
VAV WITH REHEAT Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
|
|
VAV WITH REHEAT Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
|
|
VAV WITH REHEAT Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
|
|
|
|
AirLoopHVAC,
|
|
FLR_3_DOAS, !- Name
|
|
FLR_3_DOAS_Controllers, !- Controller List Name
|
|
FLR_3_DOAS Availability Manager List, !- Availability Manager List Name
|
|
Autosize, !- Design Supply Air Flow Rate {m3/s}
|
|
FLR_3_DOAS Air Loop Branches, !- Branch List Name
|
|
, !- Connector List Name
|
|
FLR_3_DOAS Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
|
|
FLR_3_DOAS Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
|
|
FLR_3_DOAS Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
|
|
FLR_3_DOAS Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:OUTDOORAIRSYSTEM:EQUIPMENTLIST ===========
|
|
|
|
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
|
|
VAV WITH REHEAT_OA_Equipment, !- Name
|
|
HeatExchanger:AirToAir:SensibleAndLatent, !- Component 1 Object Type
|
|
VAV WITH REHEAT Heat Recovery, !- Component 1 Name
|
|
OutdoorAir:Mixer, !- Component 2 Object Type
|
|
VAV WITH REHEAT_OAMixing Box; !- Component 2 Name
|
|
|
|
|
|
|
|
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
|
|
FLR_3_DOAS_OA_Equipment, !- Name
|
|
HeatExchanger:AirToAir:SensibleAndLatent, !- Component 1 Object Type
|
|
FLR_3_DOAS Heat Recovery,!- Component 1 Name
|
|
OutdoorAir:Mixer, !- Component 2 Object Type
|
|
FLR_3_DOAS_OAMixing Box; !- Component 2 Name
|
|
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:OUTDOORAIRSYSTEM ===========
|
|
|
|
AirLoopHVAC:OutdoorAirSystem,
|
|
VAV WITH REHEAT_OA, !- Name
|
|
VAV WITH REHEAT_OA_Controllers, !- Controller List Name
|
|
VAV WITH REHEAT_OA_Equipment, !- Outdoor Air Equipment List Name
|
|
VAV WITH REHEAT Availability Manager List; !- Availability Manager List Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem,
|
|
FLR_3_DOAS_OA, !- Name
|
|
FLR_3_DOAS_OA_Controllers, !- Controller List Name
|
|
FLR_3_DOAS_OA_Equipment, !- Outdoor Air Equipment List Name
|
|
FLR_3_DOAS Availability Manager List; !- Availability Manager List Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTDOORAIR:MIXER ===========
|
|
|
|
OutdoorAir:Mixer,
|
|
Room_1_Flr_3 fan coilOA mixer, !- Name
|
|
Room_1_Flr_3 fan coilOA mix outlet node, !- Mixed Air Node Name
|
|
Room_1_Flr_3 fan coilOA inlet node, !- Outdoor Air Stream Node Name
|
|
Room_1_Flr_3 fan coilAir Relief Node Name, !- Relief Air Stream Node Name
|
|
Room_1_Flr_3 FCU Inlet Node; !- Return Air Stream Node Name
|
|
|
|
OutdoorAir:Mixer,
|
|
Room_2_Flr_3 fan coilOA mixer, !- Name
|
|
Room_2_Flr_3 fan coilOA mix outlet node, !- Mixed Air Node Name
|
|
Room_2_Flr_3 fan coilOA inlet node, !- Outdoor Air Stream Node Name
|
|
Room_2_Flr_3 fan coilAir Relief Node Name, !- Relief Air Stream Node Name
|
|
Room_2_Flr_3 FCU Inlet Node; !- Return Air Stream Node Name
|
|
|
|
OutdoorAir:Mixer,
|
|
Room_3_Mult19_Flr_3 fan coilOA mixer, !- Name
|
|
Room_3_Mult19_Flr_3 fan coilOA mix outlet node, !- Mixed Air Node Name
|
|
Room_3_Mult19_Flr_3 fan coilOA inlet node, !- Outdoor Air Stream Node Name
|
|
Room_3_Mult19_Flr_3 fan coilAir Relief Node Name, !- Relief Air Stream Node Name
|
|
Room_3_Mult19_Flr_3 FCU Inlet Node; !- Return Air Stream Node Name
|
|
|
|
OutdoorAir:Mixer,
|
|
Room_4_Mult19_Flr_3 fan coilOA mixer, !- Name
|
|
Room_4_Mult19_Flr_3 fan coilOA mix outlet node, !- Mixed Air Node Name
|
|
Room_4_Mult19_Flr_3 fan coilOA inlet node, !- Outdoor Air Stream Node Name
|
|
Room_4_Mult19_Flr_3 fan coilAir Relief Node Name, !- Relief Air Stream Node Name
|
|
Room_4_Mult19_Flr_3 FCU Inlet Node; !- Return Air Stream Node Name
|
|
|
|
OutdoorAir:Mixer,
|
|
Room_5_Flr_3 fan coilOA mixer, !- Name
|
|
Room_5_Flr_3 fan coilOA mix outlet node, !- Mixed Air Node Name
|
|
Room_5_Flr_3 fan coilOA inlet node, !- Outdoor Air Stream Node Name
|
|
Room_5_Flr_3 fan coilAir Relief Node Name, !- Relief Air Stream Node Name
|
|
Room_5_Flr_3 FCU Inlet Node; !- Return Air Stream Node Name
|
|
|
|
OutdoorAir:Mixer,
|
|
Room_6_Flr_3 fan coilOA mixer, !- Name
|
|
Room_6_Flr_3 fan coilOA mix outlet node, !- Mixed Air Node Name
|
|
Room_6_Flr_3 fan coilOA inlet node, !- Outdoor Air Stream Node Name
|
|
Room_6_Flr_3 fan coilAir Relief Node Name, !- Relief Air Stream Node Name
|
|
Room_6_Flr_3 FCU Inlet Node; !- Return Air Stream Node Name
|
|
|
|
OutdoorAir:Mixer,
|
|
Room_1_Flr_6 fan coilOA mixer, !- Name
|
|
Room_1_Flr_6 fan coilOA mix outlet node, !- Mixed Air Node Name
|
|
Room_1_Flr_6 fan coilOA inlet node, !- Outdoor Air Stream Node Name
|
|
Room_1_Flr_6 fan coilAir Relief Node Name, !- Relief Air Stream Node Name
|
|
Room_1_Flr_6 FCU Inlet Node; !- Return Air Stream Node Name
|
|
|
|
OutdoorAir:Mixer,
|
|
Room_2_Flr_6 fan coilOA mixer, !- Name
|
|
Room_2_Flr_6 fan coilOA mix outlet node, !- Mixed Air Node Name
|
|
Room_2_Flr_6 fan coilOA inlet node, !- Outdoor Air Stream Node Name
|
|
Room_2_Flr_6 fan coilAir Relief Node Name, !- Relief Air Stream Node Name
|
|
Room_2_Flr_6 FCU Inlet Node; !- Return Air Stream Node Name
|
|
|
|
OutdoorAir:Mixer,
|
|
Room_3_Mult9_Flr_6 fan coilOA mixer, !- Name
|
|
Room_3_Mult9_Flr_6 fan coilOA mix outlet node, !- Mixed Air Node Name
|
|
Room_3_Mult9_Flr_6 fan coilOA inlet node, !- Outdoor Air Stream Node Name
|
|
Room_3_Mult9_Flr_6 fan coilAir Relief Node Name, !- Relief Air Stream Node Name
|
|
Room_3_Mult9_Flr_6 FCU Inlet Node; !- Return Air Stream Node Name
|
|
OutdoorAir:Mixer,
|
|
VAV WITH REHEAT_OAMixing Box, !- Name
|
|
VAV WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Mixed Air Node Name
|
|
VAV WITH REHEAT Heat Recovery Outlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name
|
|
VAV WITH REHEAT_OARelief Node, !- Relief Air Stream Node Name
|
|
VAV WITH REHEAT Supply Equipment Inlet Node; !- Return Air Stream Node Name
|
|
OutdoorAir:Mixer,
|
|
FLR_3_DOAS_OAMixing Box, !- Name
|
|
FLR_3_DOAS_OA-FLR_3_DOAS_CoolCNode, !- Mixed Air Node Name
|
|
FLR_3_DOAS Heat Recovery Outlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name
|
|
FLR_3_DOAS_OARelief Node,!- Relief Air Stream Node Name
|
|
FLR_3_DOAS Supply Equipment Inlet Node; !- Return Air Stream Node Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:ZONESPLITTER ===========
|
|
|
|
AirLoopHVAC:ZoneSplitter,
|
|
VAV WITH REHEAT Supply Air Splitter, !- Name
|
|
VAV WITH REHEAT Zone Equipment Inlet Node, !- Inlet Node Name
|
|
Basement VAV Box Inlet Node Name, !- Outlet 1 Node Name
|
|
Retail_1_Flr_1 VAV Box Inlet Node Name, !- Outlet 2 Node Name
|
|
Retail_2_Flr_1 VAV Box Inlet Node Name, !- Outlet 3 Node Name
|
|
Mech_Flr_1 VAV Box Inlet Node Name, !- Outlet 4 Node Name
|
|
Storage_Flr_1 VAV Box Inlet Node Name, !- Outlet 5 Node Name
|
|
Laundry_Flr_1 VAV Box Inlet Node Name, !- Outlet 6 Node Name
|
|
Cafe_Flr_1 VAV Box Inlet Node Name, !- Outlet 7 Node Name
|
|
Lobby_Flr_1 VAV Box Inlet Node Name, !- Outlet 8 Node Name
|
|
Corridor_Flr_3 VAV Box Inlet Node Name, !- Outlet 9 Node Name
|
|
Banquet_Flr_6 VAV Box Inlet Node Name, !- Outlet 10 Node Name
|
|
Dining_Flr_6 VAV Box Inlet Node Name, !- Outlet 11 Node Name
|
|
Kitchen_Flr_6 VAV Box Inlet Node Name, !- Outlet 12 Node Name
|
|
Corridor_Flr_6 VAV Box Inlet Node Name; !- Outlet 13 Node Name
|
|
|
|
AirLoopHVAC:ZoneSplitter,
|
|
FLR_3_DOAS Supply Air Splitter, !- Name
|
|
FLR_3_DOAS Zone Equipment Inlet Node, !- Inlet Node Name
|
|
Room_1_Flr_3 Direct Air Inlet Node Name, !- Outlet 1 Node Name
|
|
Room_2_Flr_3 Direct Air Inlet Node Name, !- Outlet 2 Node Name
|
|
Room_3_Mult19_Flr_3 Direct Air Inlet Node Name, !- Outlet 3 Node Name
|
|
Room_4_Mult19_Flr_3 Direct Air Inlet Node Name, !- Outlet 4 Node Name
|
|
Room_5_Flr_3 Direct Air Inlet Node Name, !- Outlet 5 Node Name
|
|
Room_6_Flr_3 Direct Air Inlet Node Name, !- Outlet 6 Node Name
|
|
Room_2_Flr_6 Direct Air Inlet Node Name, !- Outlet 7 Node Name
|
|
Room_3_Mult9_Flr_6 Direct Air Inlet Node Name, !- Outlet 8 Node Name
|
|
Room_1_Flr_6 Direct Air Inlet Node Name; !- Outlet 9 Node Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:SUPPLYPATH ===========
|
|
|
|
AirLoopHVAC:SupplyPath,
|
|
VAV WITH REHEAT, !- Name
|
|
VAV WITH REHEAT Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
|
|
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
|
|
VAV WITH REHEAT Supply Air Splitter; !- Component 1 Name
|
|
|
|
AirLoopHVAC:SupplyPath,
|
|
FLR_3_DOAS, !- Name
|
|
FLR_3_DOAS Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
|
|
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
|
|
FLR_3_DOAS Supply Air Splitter; !- Component 1 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:ZONEMIXER ===========
|
|
|
|
AirLoopHVAC:ZoneMixer,
|
|
VAV WITH REHEAT Return Air Mixer, !- Name
|
|
VAV WITH REHEAT Zone Equipment Outlet Node, !- Outlet Node Name
|
|
Basement Return Air Node Name, !- Inlet 1 Node Name
|
|
Retail_1_Flr_1 Return Air Node Name, !- Inlet 2 Node Name
|
|
Retail_2_Flr_1 Return Air Node Name, !- Inlet 3 Node Name
|
|
Mech_Flr_1 Return Air Node Name, !- Inlet 4 Node Name
|
|
Storage_Flr_1 Return Air Node Name, !- Inlet 5 Node Name
|
|
Laundry_Flr_1 Return Air Node Name, !- Inlet 6 Node Name
|
|
Cafe_Flr_1 Return Air Node Name, !- Inlet 7 Node Name
|
|
Lobby_Flr_1 Return Air Node Name, !- Inlet 8 Node Name
|
|
Corridor_Flr_3 Return Air Node Name, !- Inlet 9 Node Name
|
|
Banquet_Flr_6 Return Air Node Name, !- Inlet 10 Node Name
|
|
Dining_Flr_6 Return Air Node Name, !- Inlet 11 Node Name
|
|
Kitchen_Flr_6 Return Air Node Name, !- Inlet 12 Node Name
|
|
Corridor_Flr_6 Return Air Node Name; !- Inlet 13 Node Name
|
|
|
|
AirLoopHVAC:ZoneMixer,
|
|
FLR_3_DOAS Return Air Mixer, !- Name
|
|
FLR_3_DOAS Zone Equipment Outlet Node, !- Outlet Node Name
|
|
Room_1_Flr_3 Return Air Node Name, !- Inlet 1 Node Name
|
|
Room_2_Flr_3 Return Air Node Name, !- Inlet 2 Node Name
|
|
Room_3_Mult19_Flr_3 Return Air Node Name, !- Inlet 3 Node Name
|
|
Room_4_Mult19_Flr_3 Return Air Node Name, !- Inlet 4 Node Name
|
|
Room_5_Flr_3 Return Air Node Name, !- Inlet 5 Node Name
|
|
Room_6_Flr_3 Return Air Node Name, !- Inlet 6 Node Name
|
|
Room_2_Flr_6 Return Air Node Name, !- Inlet 7 Node Name
|
|
Room_3_Mult9_Flr_6 Return Air Node Name, !- Inlet 8 Node Name
|
|
Room_1_Flr_6 Return Air Node Name; !- Inlet 9 Node Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:RETURNPATH ===========
|
|
|
|
AirLoopHVAC:ReturnPath,
|
|
VAV WITH REHEAT Return Air Path, !- Name
|
|
VAV WITH REHEAT Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
|
|
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
|
|
VAV WITH REHEAT Return Air Mixer; !- Component 1 Name
|
|
|
|
AirLoopHVAC:ReturnPath,
|
|
FLR_3_DOAS Return Air Path, !- Name
|
|
FLR_3_DOAS Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
|
|
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
|
|
FLR_3_DOAS Return Air Mixer; !- Component 1 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: BRANCH ===========
|
|
|
|
Branch,
|
|
VAV WITH REHEAT Air Loop Main Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
|
|
VAV WITH REHEAT_OA, !- Component 1 Name
|
|
VAV WITH REHEAT Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
|
|
VAV WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Component 1 Outlet Node Name
|
|
Coil:Cooling:Water, !- Component 2 Object Type
|
|
VAV WITH REHEAT_CoolC, !- Component 2 Name
|
|
VAV WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Component 2 Inlet Node Name
|
|
VAV WITH REHEAT_CoolC-VAV WITH REHEAT_HeatCNode, !- Component 2 Outlet Node Name
|
|
Coil:Heating:Water, !- Component 3 Object Type
|
|
VAV WITH REHEAT_HeatC, !- Component 3 Name
|
|
VAV WITH REHEAT_CoolC-VAV WITH REHEAT_HeatCNode, !- Component 3 Inlet Node Name
|
|
VAV WITH REHEAT_HeatC-VAV WITH REHEAT_FanNode, !- Component 3 Outlet Node Name
|
|
Fan:VariableVolume, !- Component 4 Object Type
|
|
VAV WITH REHEAT_Fan, !- Component 4 Name
|
|
VAV WITH REHEAT_HeatC-VAV WITH REHEAT_FanNode, !- Component 4 Inlet Node Name
|
|
VAV WITH REHEAT Supply Equipment Outlet Node; !- Component 4 Outlet Node Name
|
|
|
|
Branch,
|
|
FLR_3_DOAS Air Loop Main Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
|
|
FLR_3_DOAS_OA, !- Component 1 Name
|
|
FLR_3_DOAS Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
|
|
FLR_3_DOAS_OA-FLR_3_DOAS_CoolCNode, !- Component 1 Outlet Node Name
|
|
Coil:Cooling:Water, !- Component 2 Object Type
|
|
FLR_3_DOAS_CoolC, !- Component 2 Name
|
|
FLR_3_DOAS_OA-FLR_3_DOAS_CoolCNode, !- Component 2 Inlet Node Name
|
|
FLR_3_DOAS_CoolC-FLR_3_DOAS_HeatCNode, !- Component 2 Outlet Node Name
|
|
Coil:Heating:Water, !- Component 3 Object Type
|
|
FLR_3_DOAS_HeatC, !- Component 3 Name
|
|
FLR_3_DOAS_CoolC-FLR_3_DOAS_HeatCNode, !- Component 3 Inlet Node Name
|
|
FLR_3_DOAS_HeatC-FLR_3_DOAS_FanNode, !- Component 3 Outlet Node Name
|
|
Fan:ConstantVolume, !- Component 4 Object Type
|
|
FLR_3_DOAS_Fan, !- Component 4 Name
|
|
FLR_3_DOAS_HeatC-FLR_3_DOAS_FanNode, !- Component 4 Inlet Node Name
|
|
FLR_3_DOAS Supply Equipment Outlet Node; !- Component 4 Outlet Node Name
|
|
|
|
|
|
|
|
Branch,
|
|
SWHSys1 Supply Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pump:ConstantSpeed, !- Component 1 Object Type
|
|
SWHSys1 Pump, !- Component 1 Name
|
|
SWHSys1 Supply Inlet Node, !- Component 1 Inlet Node Name
|
|
SWHSys1 Pump-SWHSys1 Water HeaterNodeviaConnector; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Supply Equipment Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterHeater:Mixed, !- Component 1 Object Type
|
|
SWHSys1 Water Heater, !- Component 1 Name
|
|
SWHSys1 Pump-SWHSys1 Water HeaterNode, !- Component 1 Inlet Node Name
|
|
SWHSys1 Supply Equipment Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Supply Equipment Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SWHSys1 Supply Equipment Bypass Pipe, !- Component 1 Name
|
|
SWHSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name
|
|
SWHSys1 Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Supply Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SWHSys1 Supply Outlet Pipe, !- Component 1 Name
|
|
SWHSys1 Supply Mixer-SWHSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name
|
|
SWHSys1 Supply Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SWHSys1 Demand Inlet Pipe, !- Component 1 Name
|
|
SWHSys1 Demand Inlet Node, !- Component 1 Inlet Node Name
|
|
SWHSys1 Demand Inlet Pipe-SWHSys1 Demand Mixer; !- Component 1 Outlet Node Name
|
|
|
|
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 2, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Room_1_Flr_3 Water Equipment, !- Component 1 Name
|
|
Room_1_Flr_3 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_1_Flr_3 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 3, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Room_2_Flr_3 Water Equipment, !- Component 1 Name
|
|
Room_2_Flr_3 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_2_Flr_3 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 4, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Room_3_Mult19_Flr_3 Water Equipment, !- Component 1 Name
|
|
Room_3_Mult19_Flr_3 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_3_Mult19_Flr_3 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 5, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Room_4_Mult19_Flr_3 Water Equipment, !- Component 1 Name
|
|
Room_4_Mult19_Flr_3 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_4_Mult19_Flr_3 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 6, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Room_5_Flr_3 Water Equipment, !- Component 1 Name
|
|
Room_5_Flr_3 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_5_Flr_3 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 7, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Room_6_Flr_3 Water Equipment, !- Component 1 Name
|
|
Room_6_Flr_3 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_6_Flr_3 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 8, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Room_1_Flr_6 Water Equipment, !- Component 1 Name
|
|
Room_1_Flr_6 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_1_Flr_6 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 9, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Room_2_Flr_6 Water Equipment, !- Component 1 Name
|
|
Room_2_Flr_6 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_2_Flr_6 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 10, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Room_3_Mult9_Flr_6 Water Equipment, !- Component 1 Name
|
|
Room_3_Mult9_Flr_6 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_3_Mult9_Flr_6 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 11, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Kitchen_Flr_6 Water Equipment, !- Component 1 Name
|
|
Kitchen_Flr_6 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Kitchen_Flr_6 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SWHSys1 Demand Bypass Pipe, !- Component 1 Name
|
|
SWHSys1 Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name
|
|
SWHSys1 Demand Bypass Pipe Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SWHSys1 Demand Outlet Pipe, !- Component 1 Name
|
|
SWHSys1 Demand Mixer-SWHSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name
|
|
SWHSys1 Demand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Supply Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pump:VariableSpeed, !- Component 1 Object Type
|
|
HeatSys1 Pump, !- Component 1 Name
|
|
HeatSys1 Supply Inlet Node, !- Component 1 Inlet Node Name
|
|
HeatSys1 Pump-HeatSys1 BoilerNodeviaConnector; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Supply Equipment Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Boiler:HotWater, !- Component 1 Object Type
|
|
HeatSys1 Boiler, !- Component 1 Name
|
|
HeatSys1 Pump-HeatSys1 BoilerNode, !- Component 1 Inlet Node Name
|
|
HeatSys1 Supply Equipment Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Supply Equipment Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
HeatSys1 Supply Equipment Bypass Pipe, !- Component 1 Name
|
|
HeatSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name
|
|
HeatSys1 Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Supply Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
HeatSys1 Supply Outlet Pipe, !- Component 1 Name
|
|
HeatSys1 Supply Mixer-HeatSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name
|
|
HeatSys1 Supply Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
HeatSys1 Demand Inlet Pipe, !- Component 1 Name
|
|
HeatSys1 Demand Inlet Node, !- Component 1 Inlet Node Name
|
|
HeatSys1 Demand Inlet Pipe-HeatSys1 Demand Mixer; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 1, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Basement VAV Box Reheat Coil, !- Component 1 Name
|
|
Basement VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Basement VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 2, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Retail_1_Flr_1 VAV Box Reheat Coil, !- Component 1 Name
|
|
Retail_1_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Retail_1_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 3, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Retail_2_Flr_1 VAV Box Reheat Coil, !- Component 1 Name
|
|
Retail_2_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Retail_2_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 4, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Mech_Flr_1 VAV Box Reheat Coil, !- Component 1 Name
|
|
Mech_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Mech_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 5, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Storage_Flr_1 VAV Box Reheat Coil, !- Component 1 Name
|
|
Storage_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Storage_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 6, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Laundry_Flr_1 VAV Box Reheat Coil, !- Component 1 Name
|
|
Laundry_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Laundry_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 7, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Cafe_Flr_1 VAV Box Reheat Coil, !- Component 1 Name
|
|
Cafe_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Cafe_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 8, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Lobby_Flr_1 VAV Box Reheat Coil, !- Component 1 Name
|
|
Lobby_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Lobby_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 9, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Room_1_Flr_3 fan coilHeat Coil, !- Component 1 Name
|
|
Room_1_Flr_3 fan coilHeat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_1_Flr_3 fan coilHeat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 10, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Room_2_Flr_3 fan coilHeat Coil, !- Component 1 Name
|
|
Room_2_Flr_3 fan coilHeat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_2_Flr_3 fan coilHeat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 11, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Room_3_Mult19_Flr_3 fan coilHeat Coil, !- Component 1 Name
|
|
Room_3_Mult19_Flr_3 fan coilHeat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_3_Mult19_Flr_3 fan coilHeat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 12, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Room_4_Mult19_Flr_3 fan coilHeat Coil, !- Component 1 Name
|
|
Room_4_Mult19_Flr_3 fan coilHeat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_4_Mult19_Flr_3 fan coilHeat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 13, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Room_5_Flr_3 fan coilHeat Coil, !- Component 1 Name
|
|
Room_5_Flr_3 fan coilHeat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_5_Flr_3 fan coilHeat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 14, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Room_6_Flr_3 fan coilHeat Coil, !- Component 1 Name
|
|
Room_6_Flr_3 fan coilHeat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_6_Flr_3 fan coilHeat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 15, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Corridor_Flr_3 VAV Box Reheat Coil, !- Component 1 Name
|
|
Corridor_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Corridor_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 16, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Room_1_Flr_6 fan coilHeat Coil, !- Component 1 Name
|
|
Room_1_Flr_6 fan coilHeat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_1_Flr_6 fan coilHeat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 17, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Room_2_Flr_6 fan coilHeat Coil, !- Component 1 Name
|
|
Room_2_Flr_6 fan coilHeat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_2_Flr_6 fan coilHeat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 18, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Room_3_Mult9_Flr_6 fan coilHeat Coil, !- Component 1 Name
|
|
Room_3_Mult9_Flr_6 fan coilHeat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_3_Mult9_Flr_6 fan coilHeat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 19, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Banquet_Flr_6 VAV Box Reheat Coil, !- Component 1 Name
|
|
Banquet_Flr_6 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Banquet_Flr_6 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 20, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Dining_Flr_6 VAV Box Reheat Coil, !- Component 1 Name
|
|
Dining_Flr_6 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Dining_Flr_6 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 21, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Kitchen_Flr_6 VAV Box Reheat Coil, !- Component 1 Name
|
|
Kitchen_Flr_6 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Kitchen_Flr_6 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 22, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Corridor_Flr_6 VAV Box Reheat Coil, !- Component 1 Name
|
|
Corridor_Flr_6 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Corridor_Flr_6 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 23, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
VAV WITH REHEAT_HeatC, !- Component 1 Name
|
|
VAV WITH REHEAT_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
VAV WITH REHEAT_HeatCDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 24, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
FLR_3_DOAS_HeatC, !- Component 1 Name
|
|
FLR_3_DOAS_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
FLR_3_DOAS_HeatCDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
HeatSys1 Demand Bypass Pipe, !- Component 1 Name
|
|
HeatSys1 Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name
|
|
HeatSys1 Demand Bypass Pipe Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
HeatSys1 Demand Outlet Pipe, !- Component 1 Name
|
|
HeatSys1 Demand Mixer-HeatSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name
|
|
HeatSys1 Demand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Supply Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pump:ConstantSpeed, !- Component 1 Object Type
|
|
CoolSys1 Pump, !- Component 1 Name
|
|
CoolSys1 Supply Inlet Node, !- Component 1 Inlet Node Name
|
|
CoolSys1 Pump-CoolSys1 ChillerNodeviaConnector; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Supply Equipment Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Chiller:Electric:EIR, !- Component 1 Object Type
|
|
CoolSys1 Chiller, !- Component 1 Name
|
|
CoolSys1 Pump-CoolSys1 ChillerNode, !- Component 1 Inlet Node Name
|
|
CoolSys1 Supply Equipment Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Supply Equipment Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
CoolSys1 Supply Equipment Bypass Pipe, !- Component 1 Name
|
|
CoolSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name
|
|
CoolSys1 Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Supply Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
CoolSys1 Supply Outlet Pipe, !- Component 1 Name
|
|
CoolSys1 Supply Mixer-CoolSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name
|
|
CoolSys1 Supply Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pump:VariableSpeed, !- Component 1 Object Type
|
|
CoolSys1 Pump Secondary, !- Component 1 Name
|
|
CoolSys1 Demand Inlet Node, !- Component 1 Inlet Node Name
|
|
CoolSys1 Pump Secondary-CoolSys1 Demand Mixer; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Load Branch 1, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Cooling:Water, !- Component 1 Object Type
|
|
Room_1_Flr_3 fan coilCool Coil, !- Component 1 Name
|
|
Room_1_Flr_3 fan coilCool CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_1_Flr_3 fan coilCool CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Load Branch 2, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Cooling:Water, !- Component 1 Object Type
|
|
Room_2_Flr_3 fan coilCool Coil, !- Component 1 Name
|
|
Room_2_Flr_3 fan coilCool CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_2_Flr_3 fan coilCool CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Load Branch 3, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Cooling:Water, !- Component 1 Object Type
|
|
Room_3_Mult19_Flr_3 fan coilCool Coil, !- Component 1 Name
|
|
Room_3_Mult19_Flr_3 fan coilCool CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_3_Mult19_Flr_3 fan coilCool CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Load Branch 4, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Cooling:Water, !- Component 1 Object Type
|
|
Room_4_Mult19_Flr_3 fan coilCool Coil, !- Component 1 Name
|
|
Room_4_Mult19_Flr_3 fan coilCool CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_4_Mult19_Flr_3 fan coilCool CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Load Branch 5, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Cooling:Water, !- Component 1 Object Type
|
|
Room_5_Flr_3 fan coilCool Coil, !- Component 1 Name
|
|
Room_5_Flr_3 fan coilCool CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_5_Flr_3 fan coilCool CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Load Branch 6, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Cooling:Water, !- Component 1 Object Type
|
|
Room_6_Flr_3 fan coilCool Coil, !- Component 1 Name
|
|
Room_6_Flr_3 fan coilCool CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_6_Flr_3 fan coilCool CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Load Branch 7, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Cooling:Water, !- Component 1 Object Type
|
|
Room_1_Flr_6 fan coilCool Coil, !- Component 1 Name
|
|
Room_1_Flr_6 fan coilCool CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_1_Flr_6 fan coilCool CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Load Branch 8, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Cooling:Water, !- Component 1 Object Type
|
|
Room_2_Flr_6 fan coilCool Coil, !- Component 1 Name
|
|
Room_2_Flr_6 fan coilCool CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_2_Flr_6 fan coilCool CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Load Branch 9, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Cooling:Water, !- Component 1 Object Type
|
|
Room_3_Mult9_Flr_6 fan coilCool Coil, !- Component 1 Name
|
|
Room_3_Mult9_Flr_6 fan coilCool CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Room_3_Mult9_Flr_6 fan coilCool CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Load Branch 10, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Cooling:Water, !- Component 1 Object Type
|
|
VAV WITH REHEAT_CoolC, !- Component 1 Name
|
|
VAV WITH REHEAT_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
VAV WITH REHEAT_CoolCDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Load Branch 11, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Cooling:Water, !- Component 1 Object Type
|
|
FLR_3_DOAS_CoolC, !- Component 1 Name
|
|
FLR_3_DOAS_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
FLR_3_DOAS_CoolCDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
CoolSys1 Demand Outlet Pipe, !- Component 1 Name
|
|
CoolSys1 Demand Mixer-CoolSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name
|
|
CoolSys1 Demand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: BRANCHLIST ===========
|
|
|
|
BranchList,
|
|
VAV WITH REHEAT Air Loop Branches, !- Name
|
|
VAV WITH REHEAT Air Loop Main Branch; !- Branch 1 Name
|
|
|
|
BranchList,
|
|
FLR_3_DOAS Air Loop Branches, !- Name
|
|
FLR_3_DOAS Air Loop Main Branch; !- Branch 1 Name
|
|
|
|
BranchList,
|
|
SWHSys1 Supply Branches, !- Name
|
|
SWHSys1 Supply Inlet Branch, !- Branch 1 Name
|
|
SWHSys1 Supply Equipment Branch, !- Branch 2 Name
|
|
SWHSys1 Supply Equipment Bypass Branch, !- Branch 3 Name
|
|
SWHSys1 Supply Outlet Branch; !- Branch 4 Name
|
|
|
|
|
|
|
|
BranchList,
|
|
SWHSys1 Demand Branches, !- Name
|
|
SWHSys1 Demand Inlet Branch, !- Branch 1 Name
|
|
SWHSys1 Demand Load Branch 2, !- Branch 2 Name
|
|
SWHSys1 Demand Load Branch 3, !- Branch 3 Name
|
|
SWHSys1 Demand Load Branch 4, !- Branch 4 Name
|
|
SWHSys1 Demand Load Branch 5, !- Branch 5 Name
|
|
SWHSys1 Demand Load Branch 6, !- Branch 6 Name
|
|
SWHSys1 Demand Load Branch 7, !- Branch 7 Name
|
|
SWHSys1 Demand Load Branch 8, !- Branch 8 Name
|
|
SWHSys1 Demand Load Branch 9, !- Branch 9 Name
|
|
SWHSys1 Demand Load Branch 10, !- Branch 10 Name
|
|
SWHSys1 Demand Load Branch 11, !- Branch 11 Name
|
|
SWHSys1 Demand Bypass Branch, !- Branch 12 Name
|
|
SWHSys1 Demand Outlet Branch; !- Branch 13 Name
|
|
|
|
BranchList,
|
|
HeatSys1 Supply Branches,!- Name
|
|
HeatSys1 Supply Inlet Branch, !- Branch 1 Name
|
|
HeatSys1 Supply Equipment Branch, !- Branch 2 Name
|
|
HeatSys1 Supply Equipment Bypass Branch, !- Branch 3 Name
|
|
HeatSys1 Supply Outlet Branch; !- Branch 4 Name
|
|
|
|
BranchList,
|
|
HeatSys1 Demand Branches,!- Name
|
|
HeatSys1 Demand Inlet Branch, !- Branch 1 Name
|
|
HeatSys1 Demand Load Branch 1, !- Branch 2 Name
|
|
HeatSys1 Demand Load Branch 2, !- Branch 3 Name
|
|
HeatSys1 Demand Load Branch 3, !- Branch 4 Name
|
|
HeatSys1 Demand Load Branch 4, !- Branch 5 Name
|
|
HeatSys1 Demand Load Branch 5, !- Branch 6 Name
|
|
HeatSys1 Demand Load Branch 6, !- Branch 7 Name
|
|
HeatSys1 Demand Load Branch 7, !- Branch 8 Name
|
|
HeatSys1 Demand Load Branch 8, !- Branch 9 Name
|
|
HeatSys1 Demand Load Branch 9, !- Branch 10 Name
|
|
HeatSys1 Demand Load Branch 10, !- Branch 11 Name
|
|
HeatSys1 Demand Load Branch 11, !- Branch 12 Name
|
|
HeatSys1 Demand Load Branch 12, !- Branch 13 Name
|
|
HeatSys1 Demand Load Branch 13, !- Branch 14 Name
|
|
HeatSys1 Demand Load Branch 14, !- Branch 15 Name
|
|
HeatSys1 Demand Load Branch 15, !- Branch 16 Name
|
|
HeatSys1 Demand Load Branch 16, !- Branch 17 Name
|
|
HeatSys1 Demand Load Branch 17, !- Branch 18 Name
|
|
HeatSys1 Demand Load Branch 18, !- Branch 19 Name
|
|
HeatSys1 Demand Load Branch 19, !- Branch 20 Name
|
|
HeatSys1 Demand Load Branch 20, !- Branch 21 Name
|
|
HeatSys1 Demand Load Branch 21, !- Branch 22 Name
|
|
HeatSys1 Demand Load Branch 22, !- Branch 23 Name
|
|
HeatSys1 Demand Load Branch 23, !- Branch 24 Name
|
|
HeatSys1 Demand Load Branch 24, !- Branch 25 Name
|
|
HeatSys1 Demand Bypass Branch, !- Branch 26 Name
|
|
HeatSys1 Demand Outlet Branch; !- Branch 27 Name
|
|
|
|
BranchList,
|
|
CoolSys1 Supply Branches,!- Name
|
|
CoolSys1 Supply Inlet Branch, !- Branch 1 Name
|
|
CoolSys1 Supply Equipment Branch, !- Branch 2 Name
|
|
CoolSys1 Supply Equipment Bypass Branch, !- Branch 3 Name
|
|
CoolSys1 Supply Outlet Branch; !- Branch 4 Name
|
|
|
|
BranchList,
|
|
CoolSys1 Demand Branches,!- Name
|
|
CoolSys1 Demand Inlet Branch, !- Branch 1 Name
|
|
CoolSys1 Demand Load Branch 1, !- Branch 2 Name
|
|
CoolSys1 Demand Load Branch 2, !- Branch 3 Name
|
|
CoolSys1 Demand Load Branch 3, !- Branch 4 Name
|
|
CoolSys1 Demand Load Branch 4, !- Branch 5 Name
|
|
CoolSys1 Demand Load Branch 5, !- Branch 6 Name
|
|
CoolSys1 Demand Load Branch 6, !- Branch 7 Name
|
|
CoolSys1 Demand Load Branch 7, !- Branch 8 Name
|
|
CoolSys1 Demand Load Branch 8, !- Branch 9 Name
|
|
CoolSys1 Demand Load Branch 9, !- Branch 10 Name
|
|
CoolSys1 Demand Load Branch 10, !- Branch 11 Name
|
|
CoolSys1 Demand Load Branch 11, !- Branch 12 Name
|
|
CoolSys1 Demand Outlet Branch; !- Branch 13 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CONNECTOR:SPLITTER ===========
|
|
|
|
Connector:Splitter,
|
|
SWHSys1 Supply Splitter, !- Name
|
|
SWHSys1 Supply Inlet Branch, !- Inlet Branch Name
|
|
SWHSys1 Supply Equipment Branch, !- Outlet Branch 1 Name
|
|
SWHSys1 Supply Equipment Bypass Branch; !- Outlet Branch 2 Name
|
|
|
|
|
|
|
|
Connector:Splitter,
|
|
SWHSys1 Demand Splitter, !- Name
|
|
SWHSys1 Demand Inlet Branch, !- Inlet Branch Name
|
|
SWHSys1 Demand Load Branch 2, !- Outlet Branch 1 Name
|
|
SWHSys1 Demand Load Branch 3, !- Outlet Branch 2 Name
|
|
SWHSys1 Demand Load Branch 4, !- Outlet Branch 3 Name
|
|
SWHSys1 Demand Load Branch 5, !- Outlet Branch 4 Name
|
|
SWHSys1 Demand Load Branch 6, !- Outlet Branch 5 Name
|
|
SWHSys1 Demand Load Branch 7, !- Outlet Branch 6 Name
|
|
SWHSys1 Demand Load Branch 8, !- Outlet Branch 7 Name
|
|
SWHSys1 Demand Load Branch 9, !- Outlet Branch 8 Name
|
|
SWHSys1 Demand Load Branch 10, !- Outlet Branch 9 Name
|
|
SWHSys1 Demand Load Branch 11, !- Outlet Branch 10 Name
|
|
SWHSys1 Demand Bypass Branch; !- Outlet Branch 11 Name
|
|
|
|
Connector:Splitter,
|
|
HeatSys1 Supply Splitter,!- Name
|
|
HeatSys1 Supply Inlet Branch, !- Inlet Branch Name
|
|
HeatSys1 Supply Equipment Branch, !- Outlet Branch 1 Name
|
|
HeatSys1 Supply Equipment Bypass Branch; !- Outlet Branch 2 Name
|
|
|
|
Connector:Splitter,
|
|
HeatSys1 Demand Splitter,!- Name
|
|
HeatSys1 Demand Inlet Branch, !- Inlet Branch Name
|
|
HeatSys1 Demand Load Branch 1, !- Outlet Branch 1 Name
|
|
HeatSys1 Demand Load Branch 2, !- Outlet Branch 2 Name
|
|
HeatSys1 Demand Load Branch 3, !- Outlet Branch 3 Name
|
|
HeatSys1 Demand Load Branch 4, !- Outlet Branch 4 Name
|
|
HeatSys1 Demand Load Branch 5, !- Outlet Branch 5 Name
|
|
HeatSys1 Demand Load Branch 6, !- Outlet Branch 6 Name
|
|
HeatSys1 Demand Load Branch 7, !- Outlet Branch 7 Name
|
|
HeatSys1 Demand Load Branch 8, !- Outlet Branch 8 Name
|
|
HeatSys1 Demand Load Branch 9, !- Outlet Branch 9 Name
|
|
HeatSys1 Demand Load Branch 10, !- Outlet Branch 10 Name
|
|
HeatSys1 Demand Load Branch 11, !- Outlet Branch 11 Name
|
|
HeatSys1 Demand Load Branch 12, !- Outlet Branch 12 Name
|
|
HeatSys1 Demand Load Branch 13, !- Outlet Branch 13 Name
|
|
HeatSys1 Demand Load Branch 14, !- Outlet Branch 14 Name
|
|
HeatSys1 Demand Load Branch 15, !- Outlet Branch 15 Name
|
|
HeatSys1 Demand Load Branch 16, !- Outlet Branch 16 Name
|
|
HeatSys1 Demand Load Branch 17, !- Outlet Branch 17 Name
|
|
HeatSys1 Demand Load Branch 18, !- Outlet Branch 18 Name
|
|
HeatSys1 Demand Load Branch 19, !- Outlet Branch 19 Name
|
|
HeatSys1 Demand Load Branch 20, !- Outlet Branch 20 Name
|
|
HeatSys1 Demand Load Branch 21, !- Outlet Branch 21 Name
|
|
HeatSys1 Demand Load Branch 22, !- Outlet Branch 22 Name
|
|
HeatSys1 Demand Load Branch 23, !- Outlet Branch 23 Name
|
|
HeatSys1 Demand Load Branch 24, !- Outlet Branch 24 Name
|
|
HeatSys1 Demand Bypass Branch; !- Outlet Branch 25 Name
|
|
|
|
Connector:Splitter,
|
|
CoolSys1 Supply Splitter,!- Name
|
|
CoolSys1 Supply Inlet Branch, !- Inlet Branch Name
|
|
CoolSys1 Supply Equipment Branch, !- Outlet Branch 1 Name
|
|
CoolSys1 Supply Equipment Bypass Branch; !- Outlet Branch 2 Name
|
|
|
|
Connector:Splitter,
|
|
CoolSys1 Demand Splitter,!- Name
|
|
CoolSys1 Demand Inlet Branch, !- Inlet Branch Name
|
|
CoolSys1 Demand Load Branch 1, !- Outlet Branch 1 Name
|
|
CoolSys1 Demand Load Branch 2, !- Outlet Branch 2 Name
|
|
CoolSys1 Demand Load Branch 3, !- Outlet Branch 3 Name
|
|
CoolSys1 Demand Load Branch 4, !- Outlet Branch 4 Name
|
|
CoolSys1 Demand Load Branch 5, !- Outlet Branch 5 Name
|
|
CoolSys1 Demand Load Branch 6, !- Outlet Branch 6 Name
|
|
CoolSys1 Demand Load Branch 7, !- Outlet Branch 7 Name
|
|
CoolSys1 Demand Load Branch 8, !- Outlet Branch 8 Name
|
|
CoolSys1 Demand Load Branch 9, !- Outlet Branch 9 Name
|
|
CoolSys1 Demand Load Branch 10, !- Outlet Branch 10 Name
|
|
CoolSys1 Demand Load Branch 11; !- Outlet Branch 11 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CONNECTOR:MIXER ===========
|
|
|
|
Connector:Mixer,
|
|
SWHSys1 Supply Mixer, !- Name
|
|
SWHSys1 Supply Outlet Branch, !- Outlet Branch Name
|
|
SWHSys1 Supply Equipment Branch, !- Inlet Branch 1 Name
|
|
SWHSys1 Supply Equipment Bypass Branch; !- Inlet Branch 2 Name
|
|
|
|
|
|
|
|
Connector:Mixer,
|
|
SWHSys1 Demand Mixer, !- Name
|
|
SWHSys1 Demand Outlet Branch, !- Outlet Branch Name
|
|
SWHSys1 Demand Load Branch 2, !- Inlet Branch 1 Name
|
|
SWHSys1 Demand Load Branch 3, !- Inlet Branch 2 Name
|
|
SWHSys1 Demand Load Branch 4, !- Inlet Branch 3 Name
|
|
SWHSys1 Demand Load Branch 5, !- Inlet Branch 4 Name
|
|
SWHSys1 Demand Load Branch 6, !- Inlet Branch 5 Name
|
|
SWHSys1 Demand Load Branch 7, !- Inlet Branch 6 Name
|
|
SWHSys1 Demand Load Branch 8, !- Inlet Branch 7 Name
|
|
SWHSys1 Demand Load Branch 9, !- Inlet Branch 8 Name
|
|
SWHSys1 Demand Load Branch 10, !- Inlet Branch 9 Name
|
|
SWHSys1 Demand Load Branch 11, !- Inlet Branch 10 Name
|
|
SWHSys1 Demand Bypass Branch; !- Inlet Branch 11 Name
|
|
|
|
Connector:Mixer,
|
|
HeatSys1 Supply Mixer, !- Name
|
|
HeatSys1 Supply Outlet Branch, !- Outlet Branch Name
|
|
HeatSys1 Supply Equipment Branch, !- Inlet Branch 1 Name
|
|
HeatSys1 Supply Equipment Bypass Branch; !- Inlet Branch 2 Name
|
|
|
|
Connector:Mixer,
|
|
HeatSys1 Demand Mixer, !- Name
|
|
HeatSys1 Demand Outlet Branch, !- Outlet Branch Name
|
|
HeatSys1 Demand Load Branch 1, !- Inlet Branch 1 Name
|
|
HeatSys1 Demand Load Branch 2, !- Inlet Branch 2 Name
|
|
HeatSys1 Demand Load Branch 3, !- Inlet Branch 3 Name
|
|
HeatSys1 Demand Load Branch 4, !- Inlet Branch 4 Name
|
|
HeatSys1 Demand Load Branch 5, !- Inlet Branch 5 Name
|
|
HeatSys1 Demand Load Branch 6, !- Inlet Branch 6 Name
|
|
HeatSys1 Demand Load Branch 7, !- Inlet Branch 7 Name
|
|
HeatSys1 Demand Load Branch 8, !- Inlet Branch 8 Name
|
|
HeatSys1 Demand Load Branch 9, !- Inlet Branch 9 Name
|
|
HeatSys1 Demand Load Branch 10, !- Inlet Branch 10 Name
|
|
HeatSys1 Demand Load Branch 11, !- Inlet Branch 11 Name
|
|
HeatSys1 Demand Load Branch 12, !- Inlet Branch 12 Name
|
|
HeatSys1 Demand Load Branch 13, !- Inlet Branch 13 Name
|
|
HeatSys1 Demand Load Branch 14, !- Inlet Branch 14 Name
|
|
HeatSys1 Demand Load Branch 15, !- Inlet Branch 15 Name
|
|
HeatSys1 Demand Load Branch 16, !- Inlet Branch 16 Name
|
|
HeatSys1 Demand Load Branch 17, !- Inlet Branch 17 Name
|
|
HeatSys1 Demand Load Branch 18, !- Inlet Branch 18 Name
|
|
HeatSys1 Demand Load Branch 19, !- Inlet Branch 19 Name
|
|
HeatSys1 Demand Load Branch 20, !- Inlet Branch 20 Name
|
|
HeatSys1 Demand Load Branch 21, !- Inlet Branch 21 Name
|
|
HeatSys1 Demand Load Branch 22, !- Inlet Branch 22 Name
|
|
HeatSys1 Demand Load Branch 23, !- Inlet Branch 23 Name
|
|
HeatSys1 Demand Load Branch 24, !- Inlet Branch 24 Name
|
|
HeatSys1 Demand Bypass Branch; !- Inlet Branch 25 Name
|
|
|
|
Connector:Mixer,
|
|
CoolSys1 Supply Mixer, !- Name
|
|
CoolSys1 Supply Outlet Branch, !- Outlet Branch Name
|
|
CoolSys1 Supply Equipment Branch, !- Inlet Branch 1 Name
|
|
CoolSys1 Supply Equipment Bypass Branch; !- Inlet Branch 2 Name
|
|
|
|
Connector:Mixer,
|
|
CoolSys1 Demand Mixer, !- Name
|
|
CoolSys1 Demand Outlet Branch, !- Outlet Branch Name
|
|
CoolSys1 Demand Load Branch 1, !- Inlet Branch 1 Name
|
|
CoolSys1 Demand Load Branch 2, !- Inlet Branch 2 Name
|
|
CoolSys1 Demand Load Branch 3, !- Inlet Branch 3 Name
|
|
CoolSys1 Demand Load Branch 4, !- Inlet Branch 4 Name
|
|
CoolSys1 Demand Load Branch 5, !- Inlet Branch 5 Name
|
|
CoolSys1 Demand Load Branch 6, !- Inlet Branch 6 Name
|
|
CoolSys1 Demand Load Branch 7, !- Inlet Branch 7 Name
|
|
CoolSys1 Demand Load Branch 8, !- Inlet Branch 8 Name
|
|
CoolSys1 Demand Load Branch 9, !- Inlet Branch 9 Name
|
|
CoolSys1 Demand Load Branch 10, !- Inlet Branch 10 Name
|
|
CoolSys1 Demand Load Branch 11; !- Inlet Branch 11 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CONNECTORLIST ===========
|
|
|
|
ConnectorList,
|
|
SWHSys1 Supply Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
SWHSys1 Supply Splitter, !- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
SWHSys1 Supply Mixer; !- Connector 2 Name
|
|
|
|
ConnectorList,
|
|
SWHSys1 Demand Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
SWHSys1 Demand Splitter, !- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
SWHSys1 Demand Mixer; !- Connector 2 Name
|
|
|
|
ConnectorList,
|
|
HeatSys1 Supply Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
HeatSys1 Supply Splitter,!- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
HeatSys1 Supply Mixer; !- Connector 2 Name
|
|
|
|
ConnectorList,
|
|
HeatSys1 Demand Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
HeatSys1 Demand Splitter,!- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
HeatSys1 Demand Mixer; !- Connector 2 Name
|
|
|
|
ConnectorList,
|
|
CoolSys1 Supply Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
CoolSys1 Supply Splitter,!- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
CoolSys1 Supply Mixer; !- Connector 2 Name
|
|
|
|
ConnectorList,
|
|
CoolSys1 Demand Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
CoolSys1 Demand Splitter,!- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
CoolSys1 Demand Mixer; !- Connector 2 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: NODELIST ===========
|
|
|
|
NodeList,
|
|
Basement Inlet Nodes, !- Name
|
|
Basement VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Retail_1_Flr_1 Inlet Nodes, !- Name
|
|
Retail_1_Flr_1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Retail_2_Flr_1 Inlet Nodes, !- Name
|
|
Retail_2_Flr_1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Mech_Flr_1 Inlet Nodes, !- Name
|
|
Mech_Flr_1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Storage_Flr_1 Inlet Nodes, !- Name
|
|
Storage_Flr_1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Laundry_Flr_1 Inlet Nodes, !- Name
|
|
Laundry_Flr_1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Laundry_Flr_1 Exhaust Nodes, !- Name
|
|
Laundry_Flr_1 Exhaust Fan Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Cafe_Flr_1 Inlet Nodes, !- Name
|
|
Cafe_Flr_1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Lobby_Flr_1 Inlet Nodes, !- Name
|
|
Lobby_Flr_1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Room_1_Flr_3 Inlet Nodes,!- Name
|
|
Room_1_Flr_3 Direct Air Inlet Node Name, !- Node 1 Name
|
|
Room_1_Flr_3 FCU Exhaust Node; !- Node 2 Name
|
|
|
|
NodeList,
|
|
Room_1_Flr_3 Exhaust Nodes, !- Name
|
|
Room_1_Flr_3 FCU Inlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Room_2_Flr_3 Inlet Nodes,!- Name
|
|
Room_2_Flr_3 Direct Air Inlet Node Name, !- Node 1 Name
|
|
Room_2_Flr_3 FCU Exhaust Node; !- Node 2 Name
|
|
|
|
NodeList,
|
|
Room_2_Flr_3 Exhaust Nodes, !- Name
|
|
Room_2_Flr_3 FCU Inlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Room_3_Mult19_Flr_3 Inlet Nodes, !- Name
|
|
Room_3_Mult19_Flr_3 Direct Air Inlet Node Name, !- Node 1 Name
|
|
Room_3_Mult19_Flr_3 FCU Exhaust Node; !- Node 2 Name
|
|
|
|
NodeList,
|
|
Room_3_Mult19_Flr_3 Exhaust Nodes, !- Name
|
|
Room_3_Mult19_Flr_3 FCU Inlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Room_4_Mult19_Flr_3 Inlet Nodes, !- Name
|
|
Room_4_Mult19_Flr_3 Direct Air Inlet Node Name, !- Node 1 Name
|
|
Room_4_Mult19_Flr_3 FCU Exhaust Node; !- Node 2 Name
|
|
|
|
NodeList,
|
|
Room_4_Mult19_Flr_3 Exhaust Nodes, !- Name
|
|
Room_4_Mult19_Flr_3 FCU Inlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Room_5_Flr_3 Inlet Nodes,!- Name
|
|
Room_5_Flr_3 Direct Air Inlet Node Name, !- Node 1 Name
|
|
Room_5_Flr_3 FCU Exhaust Node; !- Node 2 Name
|
|
|
|
NodeList,
|
|
Room_5_Flr_3 Exhaust Nodes, !- Name
|
|
Room_5_Flr_3 FCU Inlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Room_6_Flr_3 Inlet Nodes,!- Name
|
|
Room_6_Flr_3 Direct Air Inlet Node Name, !- Node 1 Name
|
|
Room_6_Flr_3 FCU Exhaust Node; !- Node 2 Name
|
|
|
|
NodeList,
|
|
Room_6_Flr_3 Exhaust Nodes, !- Name
|
|
Room_6_Flr_3 FCU Inlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Corridor_Flr_3 Inlet Nodes, !- Name
|
|
Corridor_Flr_3 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Room_1_Flr_6 Inlet Nodes,!- Name
|
|
Room_1_Flr_6 Direct Air Inlet Node Name, !- Node 1 Name
|
|
Room_1_Flr_6 FCU Exhaust Node; !- Node 2 Name
|
|
|
|
NodeList,
|
|
Room_1_Flr_6 Exhaust Nodes, !- Name
|
|
Room_1_Flr_6 FCU Inlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Room_2_Flr_6 Inlet Nodes,!- Name
|
|
Room_2_Flr_6 Direct Air Inlet Node Name, !- Node 1 Name
|
|
Room_2_Flr_6 FCU Exhaust Node; !- Node 2 Name
|
|
|
|
NodeList,
|
|
Room_2_Flr_6 Exhaust Nodes, !- Name
|
|
Room_2_Flr_6 FCU Inlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Room_3_Mult9_Flr_6 Inlet Nodes, !- Name
|
|
Room_3_Mult9_Flr_6 Direct Air Inlet Node Name, !- Node 1 Name
|
|
Room_3_Mult9_Flr_6 FCU Exhaust Node; !- Node 2 Name
|
|
|
|
NodeList,
|
|
Room_3_Mult9_Flr_6 Exhaust Nodes, !- Name
|
|
Room_3_Mult9_Flr_6 FCU Inlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Banquet_Flr_6 Inlet Nodes, !- Name
|
|
Banquet_Flr_6 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Dining_Flr_6 Inlet Nodes,!- Name
|
|
Dining_Flr_6 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Dining_Flr_6 Exhaust Nodes, !- Name
|
|
Dining_Flr_6 Exhaust Fan Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Kitchen_Flr_6 Inlet Nodes, !- Name
|
|
Kitchen_Flr_6 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Kitchen_Flr_6 Exhaust Nodes, !- Name
|
|
Kitchen_Flr_6 Exhaust Fan Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Corridor_Flr_6 Inlet Nodes, !- Name
|
|
Corridor_Flr_6 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
VAV WITH REHEAT_OANode List, !- Name
|
|
VAV WITH REHEAT_OAInlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
FLR_3_DOAS_OANode List, !- Name
|
|
FLR_3_DOAS_OAInlet Node; !- Node 1 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTDOORAIR:NODE ===========
|
|
|
|
OutdoorAir:Node,
|
|
Room_1_Flr_3 fan coilOA inlet node; !- Name
|
|
|
|
OutdoorAir:Node,
|
|
Room_2_Flr_3 fan coilOA inlet node; !- Name
|
|
|
|
OutdoorAir:Node,
|
|
Room_3_Mult19_Flr_3 fan coilOA inlet node; !- Name
|
|
|
|
OutdoorAir:Node,
|
|
Room_4_Mult19_Flr_3 fan coilOA inlet node; !- Name
|
|
|
|
OutdoorAir:Node,
|
|
Room_5_Flr_3 fan coilOA inlet node; !- Name
|
|
|
|
OutdoorAir:Node,
|
|
Room_6_Flr_3 fan coilOA inlet node; !- Name
|
|
|
|
OutdoorAir:Node,
|
|
Room_1_Flr_6 fan coilOA inlet node; !- Name
|
|
|
|
OutdoorAir:Node,
|
|
Room_2_Flr_6 fan coilOA inlet node; !- Name
|
|
|
|
OutdoorAir:Node,
|
|
Room_3_Mult9_Flr_6 fan coilOA inlet node; !- Name
|
|
|
|
OutdoorAir:Node,
|
|
RACK1_condenserInlet; !- Name
|
|
|
|
OutdoorAir:Node,
|
|
RACK2_condenserInlet; !- Name
|
|
|
|
OutdoorAir:Node,
|
|
CoolSys1 Chillercondenser OA inlet; !- Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTDOORAIR:NODELIST ===========
|
|
|
|
OutdoorAir:NodeList,
|
|
VAV WITH REHEAT_OANode List; !- Node or NodeList Name 1
|
|
|
|
OutdoorAir:NodeList,
|
|
FLR_3_DOAS_OANode List; !- Node or NodeList Name 1
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: PUMP:VARIABLESPEED ===========
|
|
|
|
|
|
Pump:ConstantSpeed,
|
|
SWHSys1 Pump, !- Name
|
|
SWHSys1 Supply Inlet Node, !- Inlet Node Name
|
|
SWHSys1 Pump-SWHSys1 Water HeaterNodeviaConnector, !- Outlet Node Name
|
|
autosize, !- Design Flow Rate {m3/s}
|
|
29891, !- Design Pump Head {Pa}
|
|
AUTOSIZE, !- Design Power Consumption {W}
|
|
0.30, !- Motor Efficiency
|
|
0.0, !- Fraction of Motor Inefficiencies to Fluid Stream
|
|
Intermittent; !- Pump Control Type
|
|
|
|
|
|
|
|
Pump:VariableSpeed,
|
|
HeatSys1 Pump, !- Name
|
|
HeatSys1 Supply Inlet Node, !- Inlet Node Name
|
|
HeatSys1 Pump-HeatSys1 BoilerNodeviaConnector, !- Outlet Node Name
|
|
AUTOSIZE, !- Design Maximum Flow Rate {m3/s}
|
|
179352, !- Design Pump Head {Pa}
|
|
AUTOSIZE, !- Design Power Consumption {W}
|
|
0.909, !- Motor Efficiency
|
|
0.0, !- Fraction of Motor Inefficiencies to Fluid Stream
|
|
0,0.0205, 0.4101,0.5753, !- VariableSpeed Pump Curve Coefficients
|
|
|
|
0, !- Minimum Flow Rate {m3/s}
|
|
Intermittent;
|
|
|
|
Pump:ConstantSpeed,
|
|
CoolSys1 Pump, !- Name
|
|
CoolSys1 Supply Inlet Node, !- Inlet Node Name
|
|
CoolSys1 Pump-CoolSys1 ChillerNodeviaConnector, !- Outlet Node Name
|
|
AUTOSIZE, !- Design Flow Rate {m3/s}
|
|
44761.27683, !- Design Pump Head {Pa}
|
|
AUTOSIZE, !- Design Power Consumption {W}
|
|
0.909, !- Motor Efficiency
|
|
0.0, !- Fraction of Motor Inefficiencies to Fluid Stream
|
|
Intermittent, !- Pump Control Type
|
|
; !- Pump Flow Rate Schedule Name
|
|
|
|
|
|
|
|
Pump:VariableSpeed,
|
|
CoolSys1 Pump Secondary, !- Name
|
|
CoolSys1 Demand Inlet Node, !- Inlet Node Name
|
|
CoolSys1 Pump Secondary-CoolSys1 Demand Mixer, !- Outlet Node Name
|
|
autosize, !- Design Maximum Flow Rate {m3/s}
|
|
134283.8305, !- Design Pump Head {Pa}
|
|
autosize, !- Design Power Consumption {W}
|
|
0.909, !- Motor Efficiency
|
|
0, !- Fraction of Motor Inefficiencies to Fluid Stream
|
|
0,0.0205, 0.4101,0.5753, !- VariableSpeed Pump Curve Coefficients
|
|
|
|
0, !- Minimum Flow Rate {m3/s}
|
|
Intermittent; !- Pump Control Type
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: BOILER:HOTWATER ===========
|
|
|
|
Boiler:HotWater,
|
|
HeatSys1 Boiler, !- Name
|
|
NATURALGAS, !- Fuel Type
|
|
596723.5, !- Nominal Capacity {W}
|
|
0.8, !- Nominal Thermal Efficiency
|
|
LeavingBoiler, !- Efficiency Curve Temperature Evaluation Variable
|
|
HeatSys1 Boiler Efficiency Curve, !- Normalized Boiler Efficiency Curve Name
|
|
AUTOSIZE, !- Design Water Flow Rate {m3/s}
|
|
0.0, !- Minimum Part Load Ratio
|
|
1.2, !- Maximum Part Load Ratio
|
|
1.0, !- Optimum Part Load Ratio
|
|
HeatSys1 Pump-HeatSys1 BoilerNode, !- Boiler Water Inlet Node Name
|
|
HeatSys1 Supply Equipment Outlet Node, !- Boiler Water Outlet Node Name
|
|
95.0, !- Water Outlet Upper Temperature Limit {C}
|
|
LeavingSetpointModulated,!- Boiler Flow Mode
|
|
0.0000, !- Parasitic Electric Load {W}
|
|
1.0000; !- Sizing Factor
|
|
|
|
|
|
SetpointManager:Scheduled,
|
|
HeatSys1 Boiler Setpoint Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
HW-Loop-Temp-Schedule, !- Schedule Name
|
|
HeatSys1 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
|
|
Curve:Quadratic,
|
|
HeatSys1 Boiler Efficiency Curve, !- Name
|
|
1.0, !- Coefficient1 Constant
|
|
0.0, !- Coefficient2 x
|
|
0.0, !- Coefficient3 x**2
|
|
0, !- Minimum Value of x
|
|
1; !- Maximum Value of x
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CHILLER:ELECTRIC:EIR ===========
|
|
|
|
Chiller:Electric:EIR,
|
|
CoolSys1 Chiller, !- Name
|
|
875069.1, !- Reference Capacity {W}
|
|
2.96, !- Reference COP {W/W}
|
|
6.6700, !- Reference Leaving Chilled Water Temperature {C}
|
|
35.0000, !- Reference Entering Condenser Fluid Temperature {C}
|
|
AutoSize, !- Reference Chilled Water Flow Rate {m3/s}
|
|
AutoSize, !- Reference Condenser Fluid Flow Rate {m3/s}
|
|
AC_2010_PA_CAPFT, !- Cooling Capacity Function of Temperature Curve Name
|
|
AC_2010_PA_EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
|
|
AC_GT150_2010_PA_EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
|
|
0.1500, !- Minimum Part Load Ratio
|
|
1.0000, !- Maximum Part Load Ratio
|
|
0.8000, !- Optimum Part Load Ratio
|
|
0.1500, !- Minimum Unloading Ratio
|
|
CoolSys1 Pump-CoolSys1 ChillerNode, !- Chilled Water Inlet Node Name
|
|
CoolSys1 Supply Equipment Outlet Node, !- Chilled Water Outlet Node Name
|
|
CoolSys1 Chillercondenser OA inlet, !- Condenser Inlet Node Name
|
|
CoolSys1 Chillercondenser outlet, !- Condenser Outlet Node Name
|
|
AIRCOOLED, !- Condenser Type
|
|
, !- Condenser Fan Power Ratio {W/W}
|
|
, !- Fraction of Compressor Electric Consumption Rejected by Condenser
|
|
2.0000, !- Leaving Chilled Water Lower Temperature Limit {C}
|
|
LeavingSetpointModulated,!- Chiller Flow Mode
|
|
0.0000; !- Design Heat Recovery Water Flow Rate {m3/s}
|
|
|
|
|
|
SetpointManager:Scheduled,
|
|
CoolSys1 Chiller Setpoint Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
CW-Loop-Temp-Schedule, !- Schedule Name
|
|
CoolSys1 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: WATERHEATER:MIXED ===========
|
|
|
|
|
|
WaterHeater:Mixed,
|
|
SWHSys1 Water Heater, !- Name
|
|
2.2712471, !- Tank Volume {m3}
|
|
SWHSys1 Water Heater Setpoint Temperature Schedule Name, !- Setpoint Temperature Schedule Name
|
|
2.0, !- Deadband Temperature Difference {deltaC}
|
|
82.2222, !- Maximum Temperature Limit {C}
|
|
Cycle, !- Heater Control Type
|
|
175842.6, !- Heater Maximum Capacity {W}
|
|
, !- Heater Minimum Capacity {W}
|
|
, !- Heater Ignition Minimum Flow Rate {m3/s}
|
|
, !- Heater Ignition Delay {s}
|
|
NATURALGAS, !- Heater Fuel Type
|
|
0.802764687, !- Heater Thermal Efficiency
|
|
, !- Part Load Factor Curve Name
|
|
15908.9, !- Off Cycle Parasitic Fuel Consumption Rate {W}
|
|
NATURALGAS, !- Off Cycle Parasitic Fuel Type
|
|
0.8, !- Off Cycle Parasitic Heat Fraction to Tank
|
|
15908.9, !- On Cycle Parasitic Fuel Consumption Rate {W}
|
|
NATURALGAS, !- On Cycle Parasitic Fuel Type
|
|
, !- On Cycle Parasitic Heat Fraction to Tank
|
|
zone, !- Ambient Temperature Indicator
|
|
, !- Ambient Temperature Schedule Name
|
|
BASEMENT, !- Ambient Temperature Zone Name
|
|
, !- Ambient Temperature Outdoor Air Node Name
|
|
15.60100579, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K}
|
|
, !- Off Cycle Loss Fraction to Zone
|
|
15.60100579, !- On Cycle Loss Coefficient to Ambient Temperature {W/K}
|
|
, !- On Cycle Loss Fraction to Zone
|
|
, !- Peak Use Flow Rate {m3/s}
|
|
, !- Use Flow Rate Fraction Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
SWHSys1 Pump-SWHSys1 Water HeaterNode, !- Use Side Inlet Node Name
|
|
SWHSys1 Supply Equipment Outlet Node, !- Use Side Outlet Node Name
|
|
1.0, !- Use Side Effectiveness
|
|
, !- Source Side Inlet Node Name
|
|
, !- Source Side Outlet Node Name
|
|
1.0, !- Source Side Effectiveness
|
|
AUTOSIZE, !- Use Side Design Flow Rate {m3/s}
|
|
AUTOSIZE, !- Source Side Design Flow Rate {m3/s}
|
|
1.5; !- Indirect Water Heating Recovery Time {hr}
|
|
|
|
|
|
|
|
WaterHeater:Mixed,
|
|
SHW Booster Water Heater,!- Name
|
|
0.02271247, !- Tank Volume {m3}
|
|
Booster Water Setpoint Temp Schedule, !- Setpoint Temperature Schedule Name
|
|
2.00000005298191, !- Deadband Temperature Difference {deltaC}
|
|
82.2222244003673, !- Maximum Temperature Limit {C}
|
|
Cycle, !- Heater Control Type
|
|
8000, !- Heater Maximum Capacity {W}
|
|
0, !- Heater Minimum Capacity {W}
|
|
, !- Heater Ignition Minimum Flow Rate {m3/s}
|
|
, !- Heater Ignition Delay {s}
|
|
Electricity, !- Heater Fuel Type
|
|
1, !- Heater Thermal Efficiency. will use a separate parm variable $swh_booster_et
|
|
, !- Part Load Factor Curve Name
|
|
, !- Off Cycle Parasitic Fuel Consumption Rate {W}
|
|
Electricity, !- Off Cycle Parasitic Fuel Type
|
|
0, !- Off Cycle Parasitic Heat Fraction to Tank
|
|
, !- On Cycle Parasitic Fuel Consumption Rate {W}
|
|
, !- On Cycle Parasitic Fuel Type
|
|
, !- On Cycle Parasitic Heat Fraction to Tank
|
|
Zone, !- Ambient Temperature Indicator
|
|
, !- Ambient Temperature Schedule Name
|
|
KITCHEN_FLR_6, !- Ambient Temperature Zone Name
|
|
, !- Ambient Temperature Outdoor Air Node Name
|
|
1.053159296, !- Off-Cycle Loss Coefficient To Ambient Temperature {W/K}. will use a separate parm variable $swh_booster_ua (SWH Enhancement) Aug 17, 2012: Changed from 0 to 6 gallon (0.02271247 m3) and double the tank loss from the code
|
|
, !- Off Cycle Loss Fraction to Zone
|
|
1.053159296, !- On-Cycle Loss Coefficient To Ambient Temperature {W/K}. will use a separate parm variable $swh_booster_ua (SWH Enhancement) Aug 17, 2012: Changed from 0 to 6 gallon (0.02271247 m3) and double the tank loss from the code
|
|
, !- On Cycle Loss Fraction to Zone
|
|
8.390996e-05, !- Peak Use Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Use Flow Rate Fraction Schedule Name
|
|
Booster Water Inlet Temp Schedule; !- Cold Water Supply Temperature Schedule Name
|
|
|
|
|
|
|
|
WaterHeater:Mixed,
|
|
SWH Laundry, !- Name
|
|
1.1356235, !- Tank Volume {m3}
|
|
Laundry Setpoint Temp Schedule, !- Setpoint Temperature Schedule Name
|
|
2.00000005298191, !- Deadband Temperature Difference {deltaC}
|
|
82.2222244003673, !- Maximum Temperature Limit {C}
|
|
Cycle, !- Heater Control Type
|
|
87921.32, !- Heater Maximum Capacity {W}
|
|
0, !- Heater Minimum Capacity {W}
|
|
, !- Heater Ignition Minimum Flow Rate {m3/s}
|
|
, !- Heater Ignition Delay {s}
|
|
NaturalGas, !- Heater Fuel Type
|
|
0.803988738, !- Heater Thermal Efficiency
|
|
, !- Part Load Factor Curve Name
|
|
, !- Off Cycle Parasitic Fuel Consumption Rate {W}
|
|
NaturalGas, !- Off Cycle Parasitic Fuel Type
|
|
0, !- Off Cycle Parasitic Heat Fraction to Tank
|
|
, !- On Cycle Parasitic Fuel Consumption Rate {W}
|
|
, !- On Cycle Parasitic Fuel Type
|
|
, !- On Cycle Parasitic Heat Fraction to Tank
|
|
Zone, !- Ambient Temperature Indicator
|
|
, !- Ambient Temperature Schedule Name
|
|
BASEMENT, !- Ambient Temperature Zone Name
|
|
, !- Ambient Temperature Outdoor Air Node Name
|
|
11.25413987, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K}
|
|
, !- Off Cycle Loss Fraction to Zone
|
|
11.25413987, !- On Cycle Loss Coefficient to Ambient Temperature {W/K}
|
|
, !- On Cycle Loss Fraction to Zone
|
|
0.001930265, !- Peak Use Flow Rate {m3/s}
|
|
LAUNDRY_SWH_SCH, !- Use Flow Rate Fraction Schedule Name
|
|
; !- Cold Water Supply Temperature Schedule Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: PLANTLOOP ===========
|
|
|
|
PlantLoop,
|
|
SWHSys1, !- Name
|
|
Water, !- Fluid Type
|
|
, !- User Defined Fluid Type
|
|
SWHSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name
|
|
SWHSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name
|
|
60.0, !- Maximum Loop Temperature {C}
|
|
10.0, !- Minimum Loop Temperature {C}
|
|
AUTOSIZE, !- Maximum Loop Flow Rate {m3/s}
|
|
0.0, !- Minimum Loop Flow Rate {m3/s}
|
|
AUTOSIZE, !- Plant Loop Volume {m3}
|
|
SWHSys1 Supply Inlet Node, !- Plant Side Inlet Node Name
|
|
SWHSys1 Supply Outlet Node, !- Plant Side Outlet Node Name
|
|
SWHSys1 Supply Branches, !- Plant Side Branch List Name
|
|
SWHSys1 Supply Connectors, !- Plant Side Connector List Name
|
|
SWHSys1 Demand Inlet Node, !- Demand Side Inlet Node Name
|
|
SWHSys1 Demand Outlet Node, !- Demand Side Outlet Node Name
|
|
SWHSys1 Demand Branches, !- Demand Side Branch List Name
|
|
SWHSys1 Demand Connectors, !- Demand Side Connector List Name
|
|
Optimal; !- Load Distribution Scheme
|
|
|
|
PlantLoop,
|
|
HeatSys1, !- Name
|
|
Water, !- Fluid Type
|
|
, !- User Defined Fluid Type
|
|
HeatSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name
|
|
HeatSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name
|
|
100.0, !- Maximum Loop Temperature {C}
|
|
10.0, !- Minimum Loop Temperature {C}
|
|
AUTOSIZE, !- Maximum Loop Flow Rate {m3/s}
|
|
0.0, !- Minimum Loop Flow Rate {m3/s}
|
|
AUTOSIZE, !- Plant Loop Volume {m3}
|
|
HeatSys1 Supply Inlet Node, !- Plant Side Inlet Node Name
|
|
HeatSys1 Supply Outlet Node, !- Plant Side Outlet Node Name
|
|
HeatSys1 Supply Branches,!- Plant Side Branch List Name
|
|
HeatSys1 Supply Connectors, !- Plant Side Connector List Name
|
|
HeatSys1 Demand Inlet Node, !- Demand Side Inlet Node Name
|
|
HeatSys1 Demand Outlet Node, !- Demand Side Outlet Node Name
|
|
HeatSys1 Demand Branches,!- Demand Side Branch List Name
|
|
HeatSys1 Demand Connectors, !- Demand Side Connector List Name
|
|
Optimal; !- Load Distribution Scheme
|
|
|
|
PlantLoop,
|
|
CoolSys1, !- Name
|
|
Water, !- Fluid Type
|
|
, !- User Defined Fluid Type
|
|
CoolSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name
|
|
CoolSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name
|
|
98.0, !- Maximum Loop Temperature {C}
|
|
1.0, !- Minimum Loop Temperature {C}
|
|
AUTOSIZE, !- Maximum Loop Flow Rate {m3/s}
|
|
0.0, !- Minimum Loop Flow Rate {m3/s}
|
|
AUTOCALCULATE, !- Plant Loop Volume {m3}
|
|
CoolSys1 Supply Inlet Node, !- Plant Side Inlet Node Name
|
|
CoolSys1 Supply Outlet Node, !- Plant Side Outlet Node Name
|
|
CoolSys1 Supply Branches,!- Plant Side Branch List Name
|
|
CoolSys1 Supply Connectors, !- Plant Side Connector List Name
|
|
CoolSys1 Demand Inlet Node, !- Demand Side Inlet Node Name
|
|
CoolSys1 Demand Outlet Node, !- Demand Side Outlet Node Name
|
|
CoolSys1 Demand Branches,!- Demand Side Branch List Name
|
|
CoolSys1 Demand Connectors, !- Demand Side Connector List Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
, !- Availability Manager List Name
|
|
, !- Plant Loop Demand Calculation Scheme
|
|
TwoWayCommonPipe; !- Common Pipe Simulation
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: PIPE:ADIABATIC ===========
|
|
|
|
Pipe:Adiabatic,
|
|
SWHSys1 Supply Equipment Bypass Pipe, !- Name
|
|
SWHSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name
|
|
SWHSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
SWHSys1 Supply Outlet Pipe, !- Name
|
|
SWHSys1 Supply Mixer-SWHSys1 Supply Outlet Pipe, !- Inlet Node Name
|
|
SWHSys1 Supply Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
SWHSys1 Demand Inlet Pipe, !- Name
|
|
SWHSys1 Demand Inlet Node, !- Inlet Node Name
|
|
SWHSys1 Demand Inlet Pipe-SWHSys1 Demand Mixer; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
SWHSys1 Demand Bypass Pipe, !- Name
|
|
SWHSys1 Demand Bypass Pipe Inlet Node, !- Inlet Node Name
|
|
SWHSys1 Demand Bypass Pipe Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
SWHSys1 Demand Outlet Pipe, !- Name
|
|
SWHSys1 Demand Mixer-SWHSys1 Demand Outlet Pipe, !- Inlet Node Name
|
|
SWHSys1 Demand Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
HeatSys1 Supply Equipment Bypass Pipe, !- Name
|
|
HeatSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name
|
|
HeatSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
HeatSys1 Supply Outlet Pipe, !- Name
|
|
HeatSys1 Supply Mixer-HeatSys1 Supply Outlet Pipe, !- Inlet Node Name
|
|
HeatSys1 Supply Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
HeatSys1 Demand Inlet Pipe, !- Name
|
|
HeatSys1 Demand Inlet Node, !- Inlet Node Name
|
|
HeatSys1 Demand Inlet Pipe-HeatSys1 Demand Mixer; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
HeatSys1 Demand Bypass Pipe, !- Name
|
|
HeatSys1 Demand Bypass Pipe Inlet Node, !- Inlet Node Name
|
|
HeatSys1 Demand Bypass Pipe Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
HeatSys1 Demand Outlet Pipe, !- Name
|
|
HeatSys1 Demand Mixer-HeatSys1 Demand Outlet Pipe, !- Inlet Node Name
|
|
HeatSys1 Demand Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
CoolSys1 Supply Equipment Bypass Pipe, !- Name
|
|
CoolSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name
|
|
CoolSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
CoolSys1 Supply Outlet Pipe, !- Name
|
|
CoolSys1 Supply Mixer-CoolSys1 Supply Outlet Pipe, !- Inlet Node Name
|
|
CoolSys1 Supply Outlet Node; !- Outlet Node Name
|
|
|
|
|
|
Pipe:Adiabatic,
|
|
CoolSys1 Demand Outlet Pipe, !- Name
|
|
CoolSys1 Demand Mixer-CoolSys1 Demand Outlet Pipe, !- Inlet Node Name
|
|
CoolSys1 Demand Outlet Node; !- Outlet Node Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: PLANTEQUIPMENTLIST ===========
|
|
|
|
PlantEquipmentList,
|
|
SWHSys1 Equipment List, !- Name
|
|
WaterHeater:Mixed, !- Equipment 1 Object Type
|
|
SWHSys1 Water Heater; !- Equipment 1 Name
|
|
|
|
PlantEquipmentList,
|
|
HeatSys1 Equipment List, !- Name
|
|
Boiler:HotWater, !- Equipment 1 Object Type
|
|
HeatSys1 Boiler; !- Equipment 1 Name
|
|
|
|
PlantEquipmentList,
|
|
CoolSys1 Equipment List, !- Name
|
|
Chiller:Electric:EIR, !- Equipment 1 Object Type
|
|
CoolSys1 Chiller; !- Equipment 1 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: PLANTEQUIPMENTOPERATION:COOLINGLOAD ===========
|
|
|
|
PlantEquipmentOperation:CoolingLoad,
|
|
CoolSys1 Operation Scheme, !- Name
|
|
0.0, !- Load Range 1 Lower Limit {W}
|
|
100000000000000, !- Load Range 1 Upper Limit {W}
|
|
CoolSys1 Equipment List; !- Range 1 Equipment List Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: PLANTEQUIPMENTOPERATION:HEATINGLOAD ===========
|
|
|
|
PlantEquipmentOperation:HeatingLoad,
|
|
SWHSys1 Operation Scheme,!- Name
|
|
0.0, !- Load Range 1 Lower Limit {W}
|
|
1000000000000000, !- Load Range 1 Upper Limit {W}
|
|
SWHSys1 Equipment List; !- Range 1 Equipment List Name
|
|
|
|
PlantEquipmentOperation:HeatingLoad,
|
|
HeatSys1 Operation Scheme, !- Name
|
|
0.0, !- Load Range 1 Lower Limit {W}
|
|
1000000000000000, !- Load Range 1 Upper Limit {W}
|
|
HeatSys1 Equipment List; !- Range 1 Equipment List Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: PLANTEQUIPMENTOPERATIONSCHEMES ===========
|
|
|
|
PlantEquipmentOperationSchemes,
|
|
SWHSys1 Loop Operation Scheme List, !- Name
|
|
PlantEquipmentOperation:HeatingLoad, !- Control Scheme 1 Object Type
|
|
SWHSys1 Operation Scheme,!- Control Scheme 1 Name
|
|
PlantOnSched; !- Control Scheme 1 Schedule Name
|
|
|
|
PlantEquipmentOperationSchemes,
|
|
HeatSys1 Loop Operation Scheme List, !- Name
|
|
PlantEquipmentOperation:HeatingLoad, !- Control Scheme 1 Object Type
|
|
HeatSys1 Operation Scheme, !- Control Scheme 1 Name
|
|
PlantOnSched; !- Control Scheme 1 Schedule Name
|
|
|
|
PlantEquipmentOperationSchemes,
|
|
CoolSys1 Loop Operation Scheme List, !- Name
|
|
PlantEquipmentOperation:CoolingLoad, !- Control Scheme 1 Object Type
|
|
CoolSys1 Operation Scheme, !- Control Scheme 1 Name
|
|
PlantOnSched; !- Control Scheme 1 Schedule Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AVAILABILITYMANAGER:NIGHTCYCLE ===========
|
|
|
|
AvailabilityManager:NightCycle,
|
|
VAV WITH REHEAT Availability Manager, !- Name
|
|
ALWAYS_ON, !- Applicability Schedule Name
|
|
HVACOperationSchd, !- Fan Schedule Name
|
|
CycleOnAny, !- Control Type
|
|
1.0, !- Thermostat Tolerance {deltaC}
|
|
FixedRunTime, !- Cycling Run Time Control Type
|
|
1800; !- Cycling Run Time {s}
|
|
|
|
AvailabilityManager:NightCycle,
|
|
FLR_3_DOAS Availability Manager, !- Name
|
|
ALWAYS_ON, !- Applicability Schedule Name
|
|
HVACOperationSchd, !- Fan Schedule Name
|
|
CycleOnAny, !- Control Type
|
|
1.0, !- Thermostat Tolerance {deltaC}
|
|
FixedRunTime, !- Cycling Run Time Control Type
|
|
1800; !- Cycling Run Time {s}
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AVAILABILITYMANAGERASSIGNMENTLIST ===========
|
|
|
|
AvailabilityManagerAssignmentList,
|
|
VAV WITH REHEAT Availability Manager List, !- Name
|
|
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
|
|
VAV WITH REHEAT Availability Manager; !- Availability Manager 1 Name
|
|
|
|
AvailabilityManagerAssignmentList,
|
|
FLR_3_DOAS Availability Manager List, !- Name
|
|
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
|
|
FLR_3_DOAS Availability Manager; !- Availability Manager 1 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SETPOINTMANAGER:SCHEDULED ===========
|
|
|
|
SetpointManager:Scheduled,
|
|
CoolSys1 Loop Plant Demand Inlet Setpoint Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
CW-Loop-Temp-Schedule, !- Schedule Name
|
|
CoolSys1 Demand Inlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
|
|
|
|
SetpointManager:Scheduled,
|
|
SWHSys1 Loop Setpoint Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
SWHSys1-Loop-Temp-Schedule, !- Schedule Name
|
|
SWHSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
|
|
SetpointManager:Scheduled,
|
|
HeatSys1 Loop Setpoint Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
HW-Loop-Temp-Schedule, !- Schedule Name
|
|
HeatSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
|
|
|
|
SetpointManager:Scheduled,
|
|
CoolSys1 Loop Setpoint Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
CW-Loop-Temp-Schedule, !- Schedule Name
|
|
CoolSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SET POINT MANAGER:WARMEST ===========
|
|
|
|
SetpointManager:OutdoorAirReset,
|
|
VAV WITH REHEAT SAT setpoint, !- Name
|
|
Temperature, !- Control Variable
|
|
15.6, !- Setpoint at Outdoor Low Temperature {C}
|
|
10, !- Outdoor Low Temperature {C}
|
|
12.8, !- Setpoint at Outdoor High Temperature {C}
|
|
21.1, !- Outdoor High Temperature {C}
|
|
VAV WITH REHEAT Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SETPOINTMANAGER:OUTDOORAIRRESET ===========
|
|
|
|
SetpointManager:OutdoorAirReset,
|
|
FLR_3_DOAS SAT setpoint, !- Name
|
|
Temperature, !- Control Variable
|
|
15.5, !- Setpoint at Outdoor Low Temperature {C}
|
|
15.5, !- Outdoor Low Temperature {C}
|
|
12.8, !- Setpoint at Outdoor High Temperature {C}
|
|
21.0, !- Outdoor High Temperature {C}
|
|
FLR_3_DOAS Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SETPOINTMANAGER:MIXEDAIR ===========
|
|
|
|
SetpointManager:MixedAir,
|
|
VAV WITH REHEAT_CoolC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
VAV WITH REHEAT Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
VAV WITH REHEAT_HeatC-VAV WITH REHEAT_FanNode, !- Fan Inlet Node Name
|
|
VAV WITH REHEAT Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
VAV WITH REHEAT_CoolC-VAV WITH REHEAT_HeatCNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
VAV WITH REHEAT_HeatC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
VAV WITH REHEAT Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
VAV WITH REHEAT_HeatC-VAV WITH REHEAT_FanNode, !- Fan Inlet Node Name
|
|
VAV WITH REHEAT Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
VAV WITH REHEAT_HeatC-VAV WITH REHEAT_FanNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
VAV WITH REHEAT_OAMixed Air Temp Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
VAV WITH REHEAT Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
VAV WITH REHEAT_HeatC-VAV WITH REHEAT_FanNode, !- Fan Inlet Node Name
|
|
VAV WITH REHEAT Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
VAV WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
FLR_3_DOAS_CoolC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
FLR_3_DOAS Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
FLR_3_DOAS_HeatC-FLR_3_DOAS_FanNode, !- Fan Inlet Node Name
|
|
FLR_3_DOAS Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
FLR_3_DOAS_CoolC-FLR_3_DOAS_HeatCNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
FLR_3_DOAS_HeatC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
FLR_3_DOAS Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
FLR_3_DOAS_HeatC-FLR_3_DOAS_FanNode, !- Fan Inlet Node Name
|
|
FLR_3_DOAS Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
FLR_3_DOAS_HeatC-FLR_3_DOAS_FanNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
FLR_3_DOAS_OAMixed Air Temp Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
FLR_3_DOAS Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
FLR_3_DOAS_HeatC-FLR_3_DOAS_FanNode, !- Fan Inlet Node Name
|
|
FLR_3_DOAS Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
FLR_3_DOAS_OA-FLR_3_DOAS_CoolCNode; !- Setpoint Node or NodeList Name
|
|
|
|
|
|
SetpointManager:OutdoorAirPretreat,
|
|
VAV WITH REHEAT Heat Exhchanger Supply Air Temp Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
-99, !- Minimum Setpoint Temperature {C}
|
|
99, !- Maximum Setpoint Temperature {C}
|
|
0.00001, !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir}
|
|
1.0, !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir}
|
|
VAV WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Reference Setpoint Node Name
|
|
VAV WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Mixed Air Stream Node Name
|
|
VAV WITH REHEAT_OAInlet Node, !- Outdoor Air Stream Node Name
|
|
VAV WITH REHEAT Supply Equipment Inlet Node, !- Return Air Stream Node Name
|
|
VAV WITH REHEAT Heat Recovery Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
|
|
|
|
SetpointManager:OutdoorAirPretreat,
|
|
FLR_3_DOAS Heat Exhchanger Supply Air Temp Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
-99, !- Minimum Setpoint Temperature {C}
|
|
99, !- Maximum Setpoint Temperature {C}
|
|
0.00001, !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir}
|
|
1.0, !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir}
|
|
FLR_3_DOAS_OA-FLR_3_DOAS_CoolCNode, !- Reference Setpoint Node Name
|
|
FLR_3_DOAS_OA-FLR_3_DOAS_CoolCNode, !- Mixed Air Stream Node Name
|
|
FLR_3_DOAS_OAInlet Node, !- Outdoor Air Stream Node Name
|
|
FLR_3_DOAS Supply Equipment Inlet Node, !- Return Air Stream Node Name
|
|
FLR_3_DOAS Heat Recovery Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
|
|
|
|
HeatExchanger:AirToAir:SensibleAndLatent,
|
|
VAV WITH REHEAT Heat Recovery, !- Name
|
|
Always_On, !- Availability Schedule Name
|
|
AUTOSIZE, !- Nominal Supply Air Flow Rate {m3/s}
|
|
0.70, !- Sensible Effectiveness at 100% Heating Air Flow {dimensionless}
|
|
0.60, !- Latent Effectiveness at 100% Heating Air Flow {dimensionless}
|
|
0.70, !- Sensible Effectiveness at 75% Heating Air Flow {dimensionless}
|
|
0.60, !- Latent Effectiveness at 75% Heating Air Flow {dimensionless}
|
|
0.75, !- Sensible Effectiveness at 100% Cooling Air Flow {dimensionless}
|
|
0.60, !- Latent Effectiveness at 100% Cooling Air Flow {dimensionless}
|
|
0.75, !- Sensible Effectiveness at 75% Cooling Air Flow {dimensionless}
|
|
0.60, !- Latent Effectiveness at 75% Cooling Air Flow {dimensionless}
|
|
VAV WITH REHEAT_OAInlet Node, !- Supply Air Inlet Node Name
|
|
VAV WITH REHEAT Heat Recovery Outlet Node, !- Supply Air Outlet Node Name
|
|
VAV WITH REHEAT_OARelief Node, !- Exhaust Air Inlet Node Name
|
|
VAV WITH REHEAT Heat Recovery Secondary Outlet Node, !- Exhaust Air Outlet Node Name
|
|
6741.118, !- Nominal Electric Power {W}
|
|
Yes, !- Supply Air Outlet Temperature Control
|
|
Rotary, !- Heat Exchanger Type
|
|
ExhaustOnly, !- Frost Control Type
|
|
-23.3, !- Threshold Temperature {C}
|
|
0.167, !- Initial Defrost Time Fraction {dimensionless}
|
|
1.44; !- Rate of Defrost Time Fraction Increase {1/K}
|
|
|
|
|
|
|
|
HeatExchanger:AirToAir:SensibleAndLatent,
|
|
FLR_3_DOAS Heat Recovery,!- Name
|
|
Always_On, !- Availability Schedule Name
|
|
AUTOSIZE, !- Nominal Supply Air Flow Rate {m3/s}
|
|
0.70, !- Sensible Effectiveness at 100% Heating Air Flow {dimensionless}
|
|
0.60, !- Latent Effectiveness at 100% Heating Air Flow {dimensionless}
|
|
0.70, !- Sensible Effectiveness at 75% Heating Air Flow {dimensionless}
|
|
0.60, !- Latent Effectiveness at 75% Heating Air Flow {dimensionless}
|
|
0.75, !- Sensible Effectiveness at 100% Cooling Air Flow {dimensionless}
|
|
0.60, !- Latent Effectiveness at 100% Cooling Air Flow {dimensionless}
|
|
0.75, !- Sensible Effectiveness at 75% Cooling Air Flow {dimensionless}
|
|
0.60, !- Latent Effectiveness at 75% Cooling Air Flow {dimensionless}
|
|
FLR_3_DOAS_OAInlet Node, !- Supply Air Inlet Node Name
|
|
FLR_3_DOAS Heat Recovery Outlet Node, !- Supply Air Outlet Node Name
|
|
FLR_3_DOAS_OARelief Node,!- Exhaust Air Inlet Node Name
|
|
FLR_3_DOAS Heat Recovery Secondary Outlet Node, !- Exhaust Air Outlet Node Name
|
|
1510.213811, !- Nominal Electric Power {W}
|
|
Yes, !- Supply Air Outlet Temperature Control
|
|
Rotary, !- Heat Exchanger Type
|
|
ExhaustOnly, !- Frost Control Type
|
|
-23.3, !- Threshold Temperature {C}
|
|
0.167, !- Initial Defrost Time Fraction {dimensionless}
|
|
1.44; !- Rate of Defrost Time Fraction Increase {1/K}
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: REFRIGERATION:CASE ===========
|
|
|
|
Refrigeration:Case,
|
|
Kitchen_Flr_6_Case:1_WALKINFREEZER, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Kitchen_Flr_6, !- Zone Name
|
|
23.8800, !- Rated Ambient Temperature {C}
|
|
55.0000, !- Rated Ambient Relative Humidity {percent}
|
|
367.0000, !- Rated Total Cooling Capacity per Unit Length {W/m}
|
|
0.1000, !- Rated Latent Heat Ratio
|
|
0.4000, !- Rated Runtime Fraction
|
|
7.3200, !- Case Length {m}
|
|
-23.0000, !- Case Operating Temperature {C}
|
|
CaseTemperatureMethod, !- Latent Case Credit Curve Type
|
|
Kitchen_Flr_6_Case:1_WALKINFREEZERSingleShelfHorizontal_LatentEnergyMult, !- Latent Case Credit Curve Name
|
|
9.714285714, !- Standard Case Fan Power per Unit Length {W/m}
|
|
9.714285714, !- Operating Case Fan Power per Unit Length {W/m}
|
|
16.4000, !- Standard Case Lighting Power per Unit Length {W/m}
|
|
, !- Installed Case Lighting Power per Unit Length {W/m}
|
|
walkin_occ_lght_sch, !- Case Lighting Schedule Name
|
|
1.0000, !- Fraction of Lighting Energy to Case
|
|
0.0000, !- Case Anti-Sweat Heater Power per Unit Length {W/m}
|
|
0.0000, !- Minimum Anti-Sweat Heater Power per Unit Length {W/m}
|
|
None, !- Anti-Sweat Heater Control Type
|
|
0.0, !- Humidity at Zero Anti-Sweat Heater Energy {percent}
|
|
0.0, !- Case Height {m}
|
|
0.0000, !- Fraction of Anti-Sweat Heater Energy to Case
|
|
273.0000, !- Case Defrost Power per Unit Length {W/m}
|
|
ELECTRIC, !- Case Defrost Type
|
|
Kitchen_Flr_6_Case:1_WALKINFREEZER_CaseDefrost2aDaySched, !- Case Defrost Schedule Name
|
|
Kitchen_Flr_6_Case:1_WALKINFREEZER_CaseDripDown2aDaySched, !- Case Defrost Drip-Down Schedule Name
|
|
None, !- Defrost Energy Correction Curve Type
|
|
, !- Defrost Energy Correction Curve Name
|
|
0.0000, !- Under Case HVAC Return Air Fraction
|
|
Kitchen_Flr_6_Case:1_WALKINFREEZER_WalkInStockingSched, !- Refrigerated Case Restocking Schedule Name
|
|
Kitchen_Flr_6_Case:1_WALKINFREEZER_CaseCreditReduxSched; !- Case Credit Fraction Schedule Name
|
|
|
|
Refrigeration:Case,
|
|
Kitchen_Flr_6_Case:2_SELFCONTAINEDDISPLAYCASE, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Kitchen_Flr_6, !- Zone Name
|
|
23.8800, !- Rated Ambient Temperature {C}
|
|
55.0000, !- Rated Ambient Relative Humidity {percent}
|
|
734.0000, !- Rated Total Cooling Capacity per Unit Length {W/m}
|
|
0.0800, !- Rated Latent Heat Ratio
|
|
0.8500, !- Rated Runtime Fraction
|
|
3.6600, !- Case Length {m}
|
|
2.0000, !- Case Operating Temperature {C}
|
|
CaseTemperatureMethod, !- Latent Case Credit Curve Type
|
|
Kitchen_Flr_6_Case:2_SELFCONTAINEDDISPLAYCASEMultiShelfVertical_LatentEnergyMult, !- Latent Case Credit Curve Name
|
|
15.71428571, !- Standard Case Fan Power per Unit Length {W/m}
|
|
15.71428571, !- Operating Case Fan Power per Unit Length {W/m}
|
|
33.0000, !- Standard Case Lighting Power per Unit Length {W/m}
|
|
, !- Installed Case Lighting Power per Unit Length {W/m}
|
|
walkin_occ_lght_sch, !- Case Lighting Schedule Name
|
|
1.0000, !- Fraction of Lighting Energy to Case
|
|
0.0000, !- Case Anti-Sweat Heater Power per Unit Length {W/m}
|
|
0.0000, !- Minimum Anti-Sweat Heater Power per Unit Length {W/m}
|
|
None, !- Anti-Sweat Heater Control Type
|
|
0.0, !- Humidity at Zero Anti-Sweat Heater Energy {percent}
|
|
0.0, !- Case Height {m}
|
|
0.2000, !- Fraction of Anti-Sweat Heater Energy to Case
|
|
0.0000, !- Case Defrost Power per Unit Length {W/m}
|
|
NONE, !- Case Defrost Type
|
|
, !- Case Defrost Schedule Name
|
|
, !- Case Defrost Drip-Down Schedule Name
|
|
None, !- Defrost Energy Correction Curve Type
|
|
, !- Defrost Energy Correction Curve Name
|
|
0.0500, !- Under Case HVAC Return Air Fraction
|
|
Kitchen_Flr_6_Case:2_SELFCONTAINEDDISPLAYCASE_CaseStockingSched; !- Refrigerated Case Restocking Schedule Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: REFRIGERATION:COMPRESSORRACK ===========
|
|
|
|
Refrigeration:CompressorRack,
|
|
RACK1, !- Name
|
|
ZONE, !- Heat Rejection Location
|
|
2.32, !- Design Compressor Rack COP {W/W}
|
|
RACK1_RackCOPfTCurve, !- Compressor Rack COP Function of Temperature Curve Name
|
|
350.0000, !- Design Condenser Fan Power {W}
|
|
RACK1_RackCondFanCurve2, !- Condenser Fan Power Function of Temperature Curve Name
|
|
AIRCOOLED, !- Condenser Type
|
|
, !- Water-Cooled Condenser Inlet Node Name
|
|
, !- Water-Cooled Condenser Outlet Node Name
|
|
, !- Water-Cooled Loop Flow Type
|
|
, !- Water-Cooled Condenser Outlet Temperature Schedule Name
|
|
, !- Water-Cooled Condenser Design Flow Rate {m3/s}
|
|
, !- Water-Cooled Condenser Maximum Flow Rate {m3/s}
|
|
, !- Water-Cooled Condenser Maximum Water Outlet Temperature {C}
|
|
, !- Water-Cooled Condenser Minimum Water Inlet Temperature {C}
|
|
, !- Evaporative Condenser Availability Schedule Name
|
|
, !- Evaporative Condenser Effectiveness {dimensionless}
|
|
, !- Evaporative Condenser Air Flow Rate {m3/s}
|
|
, !- Basin Heater Capacity {W/K}
|
|
, !- Basin Heater Setpoint Temperature {C}
|
|
, !- Design Evaporative Condenser Water Pump Power {W}
|
|
, !- Evaporative Water Supply Tank Name
|
|
RACK1_condenserInlet, !- Condenser Air Inlet Node Name
|
|
LowTempRefrigeration, !- End-Use Subcategory
|
|
Kitchen_Flr_6_Case:1_WALKINFREEZER; !- Refrigeration Case Name or WalkIn Name or CaseAndWalkInList Name
|
|
|
|
Refrigeration:CompressorRack,
|
|
RACK2, !- Name
|
|
ZONE, !- Heat Rejection Location
|
|
6.98, !- Design Compressor Rack COP {W/W}
|
|
RACK2_RackCOPfTCurve, !- Compressor Rack COP Function of Temperature Curve Name
|
|
350.0000, !- Design Condenser Fan Power {W}
|
|
, !- Condenser Fan Power Function of Temperature Curve Name
|
|
AIRCOOLED, !- Condenser Type
|
|
, !- Water-Cooled Condenser Inlet Node Name
|
|
, !- Water-Cooled Condenser Outlet Node Name
|
|
, !- Water-Cooled Loop Flow Type
|
|
, !- Water-Cooled Condenser Outlet Temperature Schedule Name
|
|
, !- Water-Cooled Condenser Design Flow Rate {m3/s}
|
|
, !- Water-Cooled Condenser Maximum Flow Rate {m3/s}
|
|
, !- Water-Cooled Condenser Maximum Water Outlet Temperature {C}
|
|
, !- Water-Cooled Condenser Minimum Water Inlet Temperature {C}
|
|
, !- Evaporative Condenser Availability Schedule Name
|
|
, !- Evaporative Condenser Effectiveness {dimensionless}
|
|
, !- Evaporative Condenser Air Flow Rate {m3/s}
|
|
, !- Basin Heater Capacity {W/K}
|
|
, !- Basin Heater Setpoint Temperature {C}
|
|
, !- Design Evaporative Condenser Water Pump Power {W}
|
|
, !- Evaporative Water Supply Tank Name
|
|
RACK2_condenserInlet, !- Condenser Air Inlet Node Name
|
|
MedTempRefrigeration, !- End-Use Subcategory
|
|
Kitchen_Flr_6_Case:2_SELFCONTAINEDDISPLAYCASE; !- Refrigeration Case Name or WalkIn Name or CaseAndWalkInList Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: WATERUSE:EQUIPMENT ===========
|
|
|
|
|
|
WaterUse:Equipment,
|
|
Room_1_Flr_3 Water Equipment, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
1.31389e-06, !- Peak Flow Rate {m3/s}
|
|
GuestRoom_SWH_Sch, !- Flow Rate Fraction Schedule Name
|
|
Room_1_Flr_3 Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Room_1_Flr_3 Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Room_1_Flr_3, !- Zone Name
|
|
Room_1_Flr_3 Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Room_1_Flr_3 Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
|
|
|
|
WaterUse:Equipment,
|
|
Room_2_Flr_3 Water Equipment, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
1.31389e-06, !- Peak Flow Rate {m3/s}
|
|
GuestRoom_SWH_Sch, !- Flow Rate Fraction Schedule Name
|
|
Room_2_Flr_3 Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Room_2_Flr_3 Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Room_2_Flr_3, !- Zone Name
|
|
Room_2_Flr_3 Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Room_2_Flr_3 Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
|
|
|
|
WaterUse:Equipment,
|
|
Room_3_Mult19_Flr_3 Water Equipment, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
1.31389e-06, !- Peak Flow Rate {m3/s}
|
|
GuestRoom_SWH_Sch, !- Flow Rate Fraction Schedule Name
|
|
Room_3_Mult19_Flr_3 Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Room_3_Mult19_Flr_3 Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Room_3_Mult19_Flr_3, !- Zone Name
|
|
Room_3_Mult19_Flr_3 Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Room_3_Mult19_Flr_3 Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
|
|
|
|
WaterUse:Equipment,
|
|
Room_4_Mult19_Flr_3 Water Equipment, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
1.31389e-06, !- Peak Flow Rate {m3/s}
|
|
GuestRoom_SWH_Sch, !- Flow Rate Fraction Schedule Name
|
|
Room_4_Mult19_Flr_3 Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Room_4_Mult19_Flr_3 Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Room_4_Mult19_Flr_3, !- Zone Name
|
|
Room_4_Mult19_Flr_3 Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Room_4_Mult19_Flr_3 Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
|
|
|
|
WaterUse:Equipment,
|
|
Room_5_Flr_3 Water Equipment, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
1.31389e-06, !- Peak Flow Rate {m3/s}
|
|
GuestRoom_SWH_Sch, !- Flow Rate Fraction Schedule Name
|
|
Room_5_Flr_3 Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Room_5_Flr_3 Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Room_5_Flr_3, !- Zone Name
|
|
Room_5_Flr_3 Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Room_5_Flr_3 Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
|
|
|
|
WaterUse:Equipment,
|
|
Room_6_Flr_3 Water Equipment, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
1.31389e-06, !- Peak Flow Rate {m3/s}
|
|
GuestRoom_SWH_Sch, !- Flow Rate Fraction Schedule Name
|
|
Room_6_Flr_3 Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Room_6_Flr_3 Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Room_6_Flr_3, !- Zone Name
|
|
Room_6_Flr_3 Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Room_6_Flr_3 Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
|
|
|
|
WaterUse:Equipment,
|
|
Room_1_Flr_6 Water Equipment, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
1.31389e-06, !- Peak Flow Rate {m3/s}
|
|
GuestRoom_SWH_Sch, !- Flow Rate Fraction Schedule Name
|
|
Room_1_Flr_6 Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Room_1_Flr_6 Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Room_1_Flr_6, !- Zone Name
|
|
Room_1_Flr_6 Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Room_1_Flr_6 Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
|
|
|
|
WaterUse:Equipment,
|
|
Room_2_Flr_6 Water Equipment, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
1.31389e-06, !- Peak Flow Rate {m3/s}
|
|
GuestRoom_SWH_Sch, !- Flow Rate Fraction Schedule Name
|
|
Room_2_Flr_6 Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Room_2_Flr_6 Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Room_2_Flr_6, !- Zone Name
|
|
Room_2_Flr_6 Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Room_2_Flr_6 Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
|
|
|
|
WaterUse:Equipment,
|
|
Room_3_Mult9_Flr_6 Water Equipment, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
1.31389e-06, !- Peak Flow Rate {m3/s}
|
|
GuestRoom_SWH_Sch, !- Flow Rate Fraction Schedule Name
|
|
Room_3_Mult9_Flr_6 Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Room_3_Mult9_Flr_6 Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Room_3_Mult9_Flr_6, !- Zone Name
|
|
Room_3_Mult9_Flr_6 Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Room_3_Mult9_Flr_6 Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
|
|
|
|
WaterUse:Equipment,
|
|
Kitchen_Flr_6 Water Equipment, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
0.00013985, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Kitchen_Flr_6 Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Kitchen_Flr_6 Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Kitchen_Flr_6, !- Zone Name
|
|
Kitchen_Flr_6 Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Kitchen_Flr_6 Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: WATERUSE:CONNECTIONS ===========
|
|
|
|
|
|
WaterUse:Connections,
|
|
Room_1_Flr_3 Water Equipment, !- Name
|
|
Room_1_Flr_3 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Room_1_Flr_3 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Room_1_Flr_3 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Room_2_Flr_3 Water Equipment, !- Name
|
|
Room_2_Flr_3 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Room_2_Flr_3 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Room_2_Flr_3 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Room_3_Mult19_Flr_3 Water Equipment, !- Name
|
|
Room_3_Mult19_Flr_3 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Room_3_Mult19_Flr_3 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Room_3_Mult19_Flr_3 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Room_4_Mult19_Flr_3 Water Equipment, !- Name
|
|
Room_4_Mult19_Flr_3 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Room_4_Mult19_Flr_3 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Room_4_Mult19_Flr_3 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Room_5_Flr_3 Water Equipment, !- Name
|
|
Room_5_Flr_3 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Room_5_Flr_3 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Room_5_Flr_3 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Room_6_Flr_3 Water Equipment, !- Name
|
|
Room_6_Flr_3 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Room_6_Flr_3 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Room_6_Flr_3 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Room_1_Flr_6 Water Equipment, !- Name
|
|
Room_1_Flr_6 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Room_1_Flr_6 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Room_1_Flr_6 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Room_2_Flr_6 Water Equipment, !- Name
|
|
Room_2_Flr_6 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Room_2_Flr_6 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Room_2_Flr_6 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Room_3_Mult9_Flr_6 Water Equipment, !- Name
|
|
Room_3_Mult9_Flr_6 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Room_3_Mult9_Flr_6 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Room_3_Mult9_Flr_6 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Kitchen_Flr_6 Water Equipment, !- Name
|
|
Kitchen_Flr_6 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Kitchen_Flr_6 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Kitchen_Flr_6 Water Equipment; !- Water Use Equipment 1 Name
|
|
!No PV for this case
|
|
!- =========== ALL OBJECTS IN CLASS: CURVE:QUADRATIC ===========
|
|
|
|
Curve:Quadratic,
|
|
RACK1_RackCOPfTCurve, !- Name
|
|
1.7603, !- Coefficient1 Constant
|
|
-0.0377, !- Coefficient2 x
|
|
0.0004, !- Coefficient3 x**2
|
|
10.0000, !- Minimum Value of x
|
|
35.0000; !- Maximum Value of x
|
|
|
|
Curve:Quadratic,
|
|
RACK1_RackCondFanCurve2, !- Name
|
|
0.0000, !- Coefficient1 Constant
|
|
0.0286, !- Coefficient2 x
|
|
0.0000, !- Coefficient3 x**2
|
|
0.0000, !- Minimum Value of x
|
|
35.0000; !- Maximum Value of x
|
|
|
|
Curve:Quadratic,
|
|
RACK2_RackCOPfTCurve, !- Name
|
|
1.0000, !- Coefficient1 Constant
|
|
0.0000, !- Coefficient2 x
|
|
0.0000, !- Coefficient3 x**2
|
|
0.0000, !- Minimum Value of x
|
|
50.0000; !- Maximum Value of x
|
|
|
|
|
|
|
|
Curve:Quadratic,
|
|
TraneChillerEIRFuncPLR, !- Name
|
|
0.1410, !- Coefficient1 Constant
|
|
0.6550, !- Coefficient2 x
|
|
0.2030, !- Coefficient3 x**2
|
|
0.0000, !- Minimum Value of x
|
|
1.0000; !- Maximum Value of x
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CURVE:CUBIC ===========
|
|
|
|
Curve:Cubic,
|
|
Kitchen_Flr_6_Case:1_WALKINFREEZERSingleShelfHorizontal_LatentEnergyMult, !- Name
|
|
0.0236, !- Coefficient1 Constant
|
|
0.0006, !- Coefficient2 x
|
|
0.0000, !- Coefficient3 x**2
|
|
0.0000, !- Coefficient4 x**3
|
|
-35.0, !- Minimum Value of x
|
|
20.0; !- Maximum Value of x
|
|
|
|
Curve:Cubic,
|
|
Kitchen_Flr_6_Case:2_SELFCONTAINEDDISPLAYCASEMultiShelfVertical_LatentEnergyMult, !- Name
|
|
0.026526281, !- Coefficient1 Constant
|
|
0.001078032, !- Coefficient2 x
|
|
0.0000602558, !- Coefficient3 x**2
|
|
0.00000123732, !- Coefficient4 x**3
|
|
-35.0, !- Minimum Value of x
|
|
20.0; !- Maximum Value of x
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CURVE:BIQUADRATIC ===========
|
|
|
|
|
|
!- Set of chiller curves based on Dick Lord's study dated January 17, 2010...
|
|
|
|
!- Hospital and Large Office have water cooled chillers...Hence set of water cooled chillers to be used in these prototypes...
|
|
!- Large Office will follow 90.1-2010 Path B in the PI case whereas Hospital will follow Path A based on the discussion with the SWG
|
|
|
|
!- Changed the min. chiller condenser fluid entering temperature to 64 F (17.78 deg C) for water cooled chillers based on Dick's email dated June 4, 2010
|
|
!- and 55 F (12.7 deg C) for air cooled chillers
|
|
!- based on email string and energyplus support clarification dated June 1, 2010...also changed the upper limit for air cooled chillers to 125 F (51.67 deg C)
|
|
!- and the water cooled chillers to 115 F (46.11 deg C) later the same day...
|
|
|
|
! Temporary changes to address Dick's wrong PLR curves. On Oct. 27, 2010
|
|
! Water cooled chiller PLR curve comes from E+ data library "ReformEIRChiller Carrier 19FA 5651kW/5.50COP/Vanes EIRFPLR"
|
|
! Air-cooled chiller PLR comes from the original curve before addendum M.
|
|
|
|
|
|
!- Water cooled chillers: Positive Displacement chillers...
|
|
|
|
!- 90.1-2004 and 2007 Baseline curves...
|
|
|
|
Curve:Biquadratic,
|
|
WC_PD_2004_CAPFT, !- Name
|
|
0.9061150, !- Coefficient1 Constant
|
|
0.0292277, !- Coefficient2 x
|
|
-0.0003647, !- Coefficient3 x**2
|
|
-0.0009709, !- Coefficient4 y
|
|
-0.0000905, !- Coefficient5 y**2
|
|
0.0002527, !- Coefficient6 x*y
|
|
5.0000, !- Minimum Value of x
|
|
10.0000, !- Maximum Value of x
|
|
17.78, !- Minimum Value of y
|
|
46.11; !- Maximum Value of y
|
|
|
|
Curve:Biquadratic,
|
|
WC_PD_2004_EIRFT, !- Name
|
|
0.3617105, !- Coefficient1 Constant
|
|
-0.0229833, !- Coefficient2 x
|
|
0.0009519, !- Coefficient3 x**2
|
|
0.0131889, !- Coefficient4 y
|
|
0.0003752, !- Coefficient5 y**2
|
|
-0.0007059, !- Coefficient6 x*y
|
|
5.0000, !- Minimum Value of x
|
|
10.0000, !- Maximum Value of x
|
|
17.78, !- Minimum Value of y
|
|
46.11; !- Maximum Value of y
|
|
|
|
|
|
Curve:Bicubic,
|
|
WC_PD_LT75_2004_EIRFPLR, !- Name
|
|
-1.360532E-01, !- Coefficient1 Constant
|
|
8.642703E-03, !- Coefficient2 x
|
|
3.855583E-06, !- Coefficient3 x**2
|
|
1.024034E+00, !- Coefficient4 y
|
|
6.047444E-02, !- Coefficient5 y**2
|
|
-8.947860E-03, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
5.706602E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
31.13, !- Minimum Value of x
|
|
36.52, !- Maximum Value of x
|
|
0.19, !- Minimum Value of y
|
|
1.03; !- Maximum Value of y
|
|
|
|
|
|
|
|
|
|
Curve:Bicubic,
|
|
WC_PD_75TO150_2004_EIRFPLR, !- Name
|
|
-1.360532E-01, !- Coefficient1 Constant
|
|
8.642703E-03, !- Coefficient2 x
|
|
3.855583E-06, !- Coefficient3 x**2
|
|
1.024034E+00, !- Coefficient4 y
|
|
6.047444E-02, !- Coefficient5 y**2
|
|
-8.947860E-03, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
5.706602E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
31.13, !- Minimum Value of x
|
|
36.52, !- Maximum Value of x
|
|
0.19, !- Minimum Value of y
|
|
1.03; !- Maximum Value of y
|
|
|
|
Curve:Bicubic,
|
|
WC_PD_150TO300_2004_EIRFPLR, !- Name
|
|
-1.360532E-01, !- Coefficient1 Constant
|
|
8.642703E-03, !- Coefficient2 x
|
|
3.855583E-06, !- Coefficient3 x**2
|
|
1.024034E+00, !- Coefficient4 y
|
|
6.047444E-02, !- Coefficient5 y**2
|
|
-8.947860E-03, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
5.706602E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
31.13, !- Minimum Value of x
|
|
36.52, !- Maximum Value of x
|
|
0.19, !- Minimum Value of y
|
|
1.03; !- Maximum Value of y
|
|
|
|
Curve:Bicubic,
|
|
WC_PD_GT300_2004_EIRFPLR, !- Name
|
|
-1.360532E-01, !- Coefficient1 Constant
|
|
8.642703E-03, !- Coefficient2 x
|
|
3.855583E-06, !- Coefficient3 x**2
|
|
1.024034E+00, !- Coefficient4 y
|
|
6.047444E-02, !- Coefficient5 y**2
|
|
-8.947860E-03, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
5.706602E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
31.13, !- Minimum Value of x
|
|
36.52, !- Maximum Value of x
|
|
0.19, !- Minimum Value of y
|
|
1.03; !- Maximum Value of y
|
|
|
|
!- 90.1-2010 Path A curves...
|
|
|
|
Curve:Biquadratic,
|
|
WC_PD_LT150_2010_PA_CAPFT, !- Name
|
|
0.9061150, !- Coefficient1 Constant
|
|
0.0292277, !- Coefficient2 x
|
|
-0.0003647, !- Coefficient3 x**2
|
|
-0.0009709, !- Coefficient4 y
|
|
-0.0000905, !- Coefficient5 y**2
|
|
0.0002527, !- Coefficient6 x*y
|
|
5.0000, !- Minimum Value of x
|
|
10.0000, !- Maximum Value of x
|
|
17.78, !- Minimum Value of y
|
|
46.11; !- Maximum Value of y
|
|
|
|
Curve:Biquadratic,
|
|
WC_PD_LT150_2010_PA_EIRFT, !- Name
|
|
0.3617105, !- Coefficient1 Constant
|
|
-0.0229833, !- Coefficient2 x
|
|
0.0009519, !- Coefficient3 x**2
|
|
0.0131889, !- Coefficient4 y
|
|
0.0003752, !- Coefficient5 y**2
|
|
-0.0007059, !- Coefficient6 x*y
|
|
5.0000, !- Minimum Value of x
|
|
10.0000, !- Maximum Value of x
|
|
17.78, !- Minimum Value of y
|
|
46.11; !- Maximum Value of y
|
|
|
|
Curve:Biquadratic,
|
|
WC_PD_GT150_2010_PA_CAPFT, !- Name
|
|
0.9061150, !- Coefficient1 Constant
|
|
0.0292277, !- Coefficient2 x
|
|
-0.0003647, !- Coefficient3 x**2
|
|
-0.0009709, !- Coefficient4 y
|
|
-0.0000905, !- Coefficient5 y**2
|
|
0.0002527, !- Coefficient6 x*y
|
|
5.0000, !- Minimum Value of x
|
|
10.0000, !- Maximum Value of x
|
|
17.78, !- Minimum Value of y
|
|
46.11; !- Maximum Value of y
|
|
|
|
Curve:Biquadratic,
|
|
WC_PD_GT150_2010_PA_EIRFT, !- Name
|
|
0.3773115, !- Coefficient1 Constant
|
|
-0.0229032, !- Coefficient2 x
|
|
0.0016504, !- Coefficient3 x**2
|
|
0.0118156, !- Coefficient4 y
|
|
0.0004345, !- Coefficient5 y**2
|
|
-0.0010132, !- Coefficient6 x*y
|
|
5.0000, !- Minimum Value of x
|
|
10.0000, !- Maximum Value of x
|
|
17.78, !- Minimum Value of y
|
|
46.11; !- Maximum Value of y
|
|
|
|
Curve:Bicubic,
|
|
WC_PD_LT75_2010_PA_EIRFPLR, !- Name
|
|
-1.360532E-01, !- Coefficient1 Constant
|
|
8.642703E-03, !- Coefficient2 x
|
|
3.855583E-06, !- Coefficient3 x**2
|
|
1.024034E+00, !- Coefficient4 y
|
|
6.047444E-02, !- Coefficient5 y**2
|
|
-8.947860E-03, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
5.706602E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
31.13, !- Minimum Value of x
|
|
36.52, !- Maximum Value of x
|
|
0.19, !- Minimum Value of y
|
|
1.03; !- Maximum Value of y
|
|
|
|
Curve:Bicubic,
|
|
WC_PD_75TO150_2010_PA_EIRFPLR, !- Name
|
|
-1.360532E-01, !- Coefficient1 Constant
|
|
8.642703E-03, !- Coefficient2 x
|
|
3.855583E-06, !- Coefficient3 x**2
|
|
1.024034E+00, !- Coefficient4 y
|
|
6.047444E-02, !- Coefficient5 y**2
|
|
-8.947860E-03, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
5.706602E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
31.13, !- Minimum Value of x
|
|
36.52, !- Maximum Value of x
|
|
0.19, !- Minimum Value of y
|
|
1.03; !- Maximum Value of y
|
|
|
|
Curve:Bicubic,
|
|
WC_PD_150TO300_2010_PA_EIRFPLR, !- Name
|
|
-1.360532E-01, !- Coefficient1 Constant
|
|
8.642703E-03, !- Coefficient2 x
|
|
3.855583E-06, !- Coefficient3 x**2
|
|
1.024034E+00, !- Coefficient4 y
|
|
6.047444E-02, !- Coefficient5 y**2
|
|
-8.947860E-03, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
5.706602E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
31.13, !- Minimum Value of x
|
|
36.52, !- Maximum Value of x
|
|
0.19, !- Minimum Value of y
|
|
1.03; !- Maximum Value of y
|
|
|
|
Curve:Bicubic,
|
|
WC_PD_GT300_2010_PA_EIRFPLR, !- Name
|
|
-1.360532E-01, !- Coefficient1 Constant
|
|
8.642703E-03, !- Coefficient2 x
|
|
3.855583E-06, !- Coefficient3 x**2
|
|
1.024034E+00, !- Coefficient4 y
|
|
6.047444E-02, !- Coefficient5 y**2
|
|
-8.947860E-03, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
5.706602E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
31.13, !- Minimum Value of x
|
|
36.52, !- Maximum Value of x
|
|
0.19, !- Minimum Value of y
|
|
1.03; !- Maximum Value of y
|
|
|
|
!- 90.1-2010 Path B curves..
|
|
|
|
Curve:Biquadratic,
|
|
WC_PD_2010_PB_CAPFT, !- Name
|
|
0.9061171, !- Coefficient1 Constant
|
|
0.0292267, !- Coefficient2 x
|
|
-0.0003665, !- Coefficient3 x**2
|
|
-0.0009698, !- Coefficient4 y
|
|
-0.0000907, !- Coefficient5 y**2
|
|
0.0002535, !- Coefficient6 x*y
|
|
5.0000, !- Minimum Value of x
|
|
10.0000, !- Maximum Value of x
|
|
17.78, !- Minimum Value of y
|
|
46.11; !- Maximum Value of y
|
|
|
|
Curve:Biquadratic,
|
|
WC_PD_2010_PB_EIRFT, !- Name
|
|
0.3617782, !- Coefficient1 Constant
|
|
-0.0230016, !- Coefficient2 x
|
|
0.0009672, !- Coefficient3 x**2
|
|
0.0131801, !- Coefficient4 y
|
|
0.0003761, !- Coefficient5 y**2
|
|
-0.0007121, !- Coefficient6 x*y
|
|
5.0000, !- Minimum Value of x
|
|
10.0000, !- Maximum Value of x
|
|
17.78, !- Minimum Value of y
|
|
46.11; !- Maximum Value of y
|
|
|
|
Curve:Bicubic,
|
|
WC_PD_LT75_2010_PB_EIRFPLR, !- Name
|
|
-1.360532E-01, !- Coefficient1 Constant
|
|
8.642703E-03, !- Coefficient2 x
|
|
3.855583E-06, !- Coefficient3 x**2
|
|
1.024034E+00, !- Coefficient4 y
|
|
6.047444E-02, !- Coefficient5 y**2
|
|
-8.947860E-03, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
5.706602E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
31.13, !- Minimum Value of x
|
|
36.52, !- Maximum Value of x
|
|
0.19, !- Minimum Value of y
|
|
1.03; !- Maximum Value of y
|
|
|
|
Curve:Bicubic,
|
|
WC_PD_75TO150_2010_PB_EIRFPLR, !- Name
|
|
-1.360532E-01, !- Coefficient1 Constant
|
|
8.642703E-03, !- Coefficient2 x
|
|
3.855583E-06, !- Coefficient3 x**2
|
|
1.024034E+00, !- Coefficient4 y
|
|
6.047444E-02, !- Coefficient5 y**2
|
|
-8.947860E-03, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
5.706602E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
31.13, !- Minimum Value of x
|
|
36.52, !- Maximum Value of x
|
|
0.19, !- Minimum Value of y
|
|
1.03; !- Maximum Value of y
|
|
|
|
Curve:Bicubic,
|
|
WC_PD_150TO300_2010_PB_EIRFPLR, !- Name
|
|
-1.360532E-01, !- Coefficient1 Constant
|
|
8.642703E-03, !- Coefficient2 x
|
|
3.855583E-06, !- Coefficient3 x**2
|
|
1.024034E+00, !- Coefficient4 y
|
|
6.047444E-02, !- Coefficient5 y**2
|
|
-8.947860E-03, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
5.706602E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
31.13, !- Minimum Value of x
|
|
36.52, !- Maximum Value of x
|
|
0.19, !- Minimum Value of y
|
|
1.03; !- Maximum Value of y
|
|
|
|
Curve:Bicubic,
|
|
WC_PD_GT300_2010_PB_EIRFPLR, !- Name
|
|
-1.360532E-01, !- Coefficient1 Constant
|
|
8.642703E-03, !- Coefficient2 x
|
|
3.855583E-06, !- Coefficient3 x**2
|
|
1.024034E+00, !- Coefficient4 y
|
|
6.047444E-02, !- Coefficient5 y**2
|
|
-8.947860E-03, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
5.706602E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
31.13, !- Minimum Value of x
|
|
36.52, !- Maximum Value of x
|
|
0.19, !- Minimum Value of y
|
|
1.03; !- Maximum Value of y
|
|
|
|
|
|
!- Water cooled chillers: Centrifugal Chillers...
|
|
|
|
!- 90.1-2004 Baseline curves...
|
|
|
|
Curve:Biquadratic,
|
|
WC_Cent_LT150_2004_CAPFT, !- Name
|
|
0.7446451, !- Coefficient1 Constant
|
|
0.0114858, !- Coefficient2 x
|
|
0.0000148, !- Coefficient3 x**2
|
|
0.0224010, !- Coefficient4 y
|
|
-0.0006880, !- Coefficient5 y**2
|
|
0.0009839, !- Coefficient6 x*y
|
|
5.0000, !- Minimum Value of x
|
|
10.0000, !- Maximum Value of x
|
|
17.78, !- Minimum Value of y
|
|
46.11; !- Maximum Value of y
|
|
|
|
Curve:Biquadratic,
|
|
WC_Cent_LT150_2004_EIRFT, !- Name
|
|
0.7728770, !- Coefficient1 Constant
|
|
0.0221010, !- Coefficient2 x
|
|
-0.0000799, !- Coefficient3 x**2
|
|
-0.0070045, !- Coefficient4 y
|
|
0.0004763, !- Coefficient5 y**2
|
|
-0.0010612, !- Coefficient6 x*y
|
|
5.0000, !- Minimum Value of x
|
|
10.0000, !- Maximum Value of x
|
|
17.78, !- Minimum Value of y
|
|
46.11; !- Maximum Value of y
|
|
|
|
Curve:Biquadratic,
|
|
WC_Cent_GT150_2004_CAPFT, !- Name
|
|
0.7600172, !- Coefficient1 Constant
|
|
0.0147432, !- Coefficient2 x
|
|
0.0002144, !- Coefficient3 x**2
|
|
0.0207218, !- Coefficient4 y
|
|
-0.0006425, !- Coefficient5 y**2
|
|
0.0008007, !- Coefficient6 x*y
|
|
5.0000, !- Minimum Value of x
|
|
10.0000, !- Maximum Value of x
|
|
17.78, !- Minimum Value of y
|
|
46.11; !- Maximum Value of y
|
|
|
|
Curve:Biquadratic,
|
|
WC_Cent_GT150_2004_EIRFT, !- Name
|
|
0.6772577, !- Coefficient1 Constant
|
|
0.0117857, !- Coefficient2 x
|
|
-0.0001967, !- Coefficient3 x**2
|
|
0.0014414, !- Coefficient4 y
|
|
0.0003005, !- Coefficient5 y**2
|
|
-0.0006807, !- Coefficient6 x*y
|
|
5.0000, !- Minimum Value of x
|
|
10.0000, !- Maximum Value of x
|
|
17.78, !- Minimum Value of y
|
|
46.11; !- Maximum Value of y
|
|
|
|
Curve:Bicubic,
|
|
WC_Cent_LT150_2004_EIRFPLR, !- Name
|
|
-1.360532E-01, !- Coefficient1 Constant
|
|
8.642703E-03, !- Coefficient2 x
|
|
3.855583E-06, !- Coefficient3 x**2
|
|
1.024034E+00, !- Coefficient4 y
|
|
6.047444E-02, !- Coefficient5 y**2
|
|
-8.947860E-03, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
5.706602E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
31.13, !- Minimum Value of x
|
|
36.52, !- Maximum Value of x
|
|
0.19, !- Minimum Value of y
|
|
1.03; !- Maximum Value of y
|
|
|
|
Curve:Bicubic,
|
|
WC_Cent_150TO300_2004_EIRFPLR,!- Name
|
|
-1.360532E-01, !- Coefficient1 Constant
|
|
8.642703E-03, !- Coefficient2 x
|
|
3.855583E-06, !- Coefficient3 x**2
|
|
1.024034E+00, !- Coefficient4 y
|
|
6.047444E-02, !- Coefficient5 y**2
|
|
-8.947860E-03, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
5.706602E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
31.13, !- Minimum Value of x
|
|
36.52, !- Maximum Value of x
|
|
0.19, !- Minimum Value of y
|
|
1.03; !- Maximum Value of y
|
|
|
|
|
|
Curve:Bicubic,
|
|
WC_Cent_GT300_2004_EIRFPLR, !- Name
|
|
-1.360532E-01, !- Coefficient1 Constant
|
|
8.642703E-03, !- Coefficient2 x
|
|
3.855583E-06, !- Coefficient3 x**2
|
|
1.024034E+00, !- Coefficient4 y
|
|
6.047444E-02, !- Coefficient5 y**2
|
|
-8.947860E-03, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
5.706602E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
31.13, !- Minimum Value of x
|
|
36.52, !- Maximum Value of x
|
|
0.19, !- Minimum Value of y
|
|
1.03; !- Maximum Value of y
|
|
|
|
|
|
!- 90.1-2010 Path A curves...
|
|
|
|
Curve:Biquadratic,
|
|
WC_Cent_2010_PA_CAPFT, !- Name
|
|
0.7600172, !- Coefficient1 Constant
|
|
0.0147432, !- Coefficient2 x
|
|
0.0002144, !- Coefficient3 x**2
|
|
0.0207218, !- Coefficient4 y
|
|
-0.0006425, !- Coefficient5 y**2
|
|
0.0008007, !- Coefficient6 x*y
|
|
5.0000, !- Minimum Value of x
|
|
10.0000, !- Maximum Value of x
|
|
17.78, !- Minimum Value of y
|
|
46.11; !- Maximum Value of y
|
|
|
|
Curve:Biquadratic,
|
|
WC_Cent_2010_PA_EIRFT, !- Name
|
|
0.6772577, !- Coefficient1 Constant
|
|
0.0117857, !- Coefficient2 x
|
|
-0.0001967, !- Coefficient3 x**2
|
|
0.0014414, !- Coefficient4 y
|
|
0.0003005, !- Coefficient5 y**2
|
|
-0.0006807, !- Coefficient6 x*y
|
|
5.0000, !- Minimum Value of x
|
|
10.0000, !- Maximum Value of x
|
|
17.78, !- Minimum Value of y
|
|
46.11; !- Maximum Value of y
|
|
|
|
|
|
Curve:Bicubic,
|
|
WC_Cent_LT150_2010_PA_EIRFPLR, !- Name
|
|
-1.360532E-01, !- Coefficient1 Constant
|
|
8.642703E-03, !- Coefficient2 x
|
|
3.855583E-06, !- Coefficient3 x**2
|
|
1.024034E+00, !- Coefficient4 y
|
|
6.047444E-02, !- Coefficient5 y**2
|
|
-8.947860E-03, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
5.706602E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
31.13, !- Minimum Value of x
|
|
36.52, !- Maximum Value of x
|
|
0.19, !- Minimum Value of y
|
|
1.03; !- Maximum Value of y
|
|
|
|
Curve:Bicubic,
|
|
WC_Cent_150TO300_2010_PA_EIRFPLR,!- Name
|
|
-1.360532E-01, !- Coefficient1 Constant
|
|
8.642703E-03, !- Coefficient2 x
|
|
3.855583E-06, !- Coefficient3 x**2
|
|
1.024034E+00, !- Coefficient4 y
|
|
6.047444E-02, !- Coefficient5 y**2
|
|
-8.947860E-03, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
5.706602E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
31.13, !- Minimum Value of x
|
|
36.52, !- Maximum Value of x
|
|
0.19, !- Minimum Value of y
|
|
1.03; !- Maximum Value of y
|
|
|
|
Curve:Bicubic,
|
|
WC_Cent_300TO600_2010_PA_EIRFPLR, !- Name
|
|
-1.360532E-01, !- Coefficient1 Constant
|
|
8.642703E-03, !- Coefficient2 x
|
|
3.855583E-06, !- Coefficient3 x**2
|
|
1.024034E+00, !- Coefficient4 y
|
|
6.047444E-02, !- Coefficient5 y**2
|
|
-8.947860E-03, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
5.706602E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
31.13, !- Minimum Value of x
|
|
36.52, !- Maximum Value of x
|
|
0.19, !- Minimum Value of y
|
|
1.03; !- Maximum Value of y
|
|
|
|
Curve:Bicubic,
|
|
WC_Cent_GT600_2010_PA_EIRFPLR, !- Name
|
|
-1.360532E-01, !- Coefficient1 Constant
|
|
8.642703E-03, !- Coefficient2 x
|
|
3.855583E-06, !- Coefficient3 x**2
|
|
1.024034E+00, !- Coefficient4 y
|
|
6.047444E-02, !- Coefficient5 y**2
|
|
-8.947860E-03, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
5.706602E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
31.13, !- Minimum Value of x
|
|
36.52, !- Maximum Value of x
|
|
0.19, !- Minimum Value of y
|
|
1.03; !- Maximum Value of y
|
|
|
|
!- 90.1-2010 Path B curves...
|
|
|
|
Curve:Biquadratic,
|
|
WC_Cent_2010_PB_CAPFT, !- Name
|
|
0.5362340, !- Coefficient1 Constant
|
|
0.005581, !- Coefficient2 x
|
|
-0.0013654, !- Coefficient3 x**2
|
|
0.0488966, !- Coefficient4 y
|
|
-0.0012018, !- Coefficient5 y**2
|
|
0.0010523, !- Coefficient6 x*y
|
|
5.0000, !- Minimum Value of x
|
|
10.0000, !- Maximum Value of x
|
|
17.78, !- Minimum Value of y
|
|
46.11; !- Maximum Value of y
|
|
|
|
Curve:Biquadratic,
|
|
WC_Cent_2010_PB_EIRFT, !- Name
|
|
1.0821822, !- Coefficient1 Constant
|
|
0.0042977, !- Coefficient2 x
|
|
-0.0013182, !- Coefficient3 x**2
|
|
-0.0260781, !- Coefficient4 y
|
|
0.0008256, !- Coefficient5 y**2
|
|
-0.0006013, !- Coefficient6 x*y
|
|
5.0000, !- Minimum Value of x
|
|
10.0000, !- Maximum Value of x
|
|
17.78, !- Minimum Value of y
|
|
46.11; !- Maximum Value of y
|
|
|
|
|
|
Curve:Bicubic,
|
|
WC_Cent_LT150_2010_PB_EIRFPLR, !- Name
|
|
-1.360532E-01, !- Coefficient1 Constant
|
|
8.642703E-03, !- Coefficient2 x
|
|
3.855583E-06, !- Coefficient3 x**2
|
|
1.024034E+00, !- Coefficient4 y
|
|
6.047444E-02, !- Coefficient5 y**2
|
|
-8.947860E-03, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
5.706602E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
31.13, !- Minimum Value of x
|
|
36.52, !- Maximum Value of x
|
|
0.19, !- Minimum Value of y
|
|
1.03; !- Maximum Value of y
|
|
|
|
|
|
Curve:Bicubic,
|
|
WC_Cent_150TO300_2010_PB_EIRFPLR, !- Name
|
|
-1.360532E-01, !- Coefficient1 Constant
|
|
8.642703E-03, !- Coefficient2 x
|
|
3.855583E-06, !- Coefficient3 x**2
|
|
1.024034E+00, !- Coefficient4 y
|
|
6.047444E-02, !- Coefficient5 y**2
|
|
-8.947860E-03, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
5.706602E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
31.13, !- Minimum Value of x
|
|
36.52, !- Maximum Value of x
|
|
0.19, !- Minimum Value of y
|
|
1.03; !- Maximum Value of y
|
|
|
|
|
|
Curve:Bicubic,
|
|
WC_Cent_300TO600_2010_PB_EIRFPLR, !- Name
|
|
-1.360532E-01, !- Coefficient1 Constant
|
|
8.642703E-03, !- Coefficient2 x
|
|
3.855583E-06, !- Coefficient3 x**2
|
|
1.024034E+00, !- Coefficient4 y
|
|
6.047444E-02, !- Coefficient5 y**2
|
|
-8.947860E-03, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
5.706602E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
31.13, !- Minimum Value of x
|
|
36.52, !- Maximum Value of x
|
|
0.19, !- Minimum Value of y
|
|
1.03; !- Maximum Value of y
|
|
|
|
Curve:Bicubic,
|
|
WC_Cent_GT600_2010_PB_EIRFPLR, !- Name
|
|
-1.360532E-01, !- Coefficient1 Constant
|
|
8.642703E-03, !- Coefficient2 x
|
|
3.855583E-06, !- Coefficient3 x**2
|
|
1.024034E+00, !- Coefficient4 y
|
|
6.047444E-02, !- Coefficient5 y**2
|
|
-8.947860E-03, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
5.706602E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
31.13, !- Minimum Value of x
|
|
36.52, !- Maximum Value of x
|
|
0.19, !- Minimum Value of y
|
|
1.03; !- Maximum Value of y
|
|
|
|
!- Air cooled chillers...
|
|
|
|
!- 90.1-2004 Baseline curves...
|
|
|
|
Curve:Biquadratic,
|
|
AC_2004_CAPFT, !- Name
|
|
1.0433811, !- Coefficient1 Constant
|
|
0.0407077, !- Coefficient2 x
|
|
0.0004506, !- Coefficient3 x**2
|
|
-0.0041514, !- Coefficient4 y
|
|
-0.0000886, !- Coefficient5 y**2
|
|
-0.0003467, !- Coefficient6 x*y
|
|
5.0000, !- Minimum Value of x
|
|
10.0000, !- Maximum Value of x
|
|
12.7, !- Minimum Value of y
|
|
51.67; !- Maximum Value of y
|
|
|
|
Curve:Biquadratic,
|
|
AC_2004_EIRFT, !- Name
|
|
0.5961915, !- Coefficient1 Constant
|
|
-0.0099496, !- Coefficient2 x
|
|
0.0007888, !- Coefficient3 x**2
|
|
0.0004506, !- Coefficient4 y
|
|
0.0004875, !- Coefficient5 y**2
|
|
-0.0007623, !- Coefficient6 x*y
|
|
5.0000, !- Minimum Value of x
|
|
10.0000, !- Maximum Value of x
|
|
12.7, !- Minimum Value of y
|
|
51.67; !- Maximum Value of y
|
|
|
|
Curve:Quadratic,
|
|
AC_LT150_2004_EIRFPLR, !- Name
|
|
0.1410, !- Coefficient1 Constant
|
|
0.6550, !- Coefficient2 x
|
|
0.2030, !- Coefficient3 x**2
|
|
0.0000, !- Minimum Value of x
|
|
1.0000; !- Maximum Value of x
|
|
|
|
Curve:Quadratic,
|
|
AC_GT150_2004_EIRFPLR, !- Name
|
|
0.1410, !- Coefficient1 Constant
|
|
0.6550, !- Coefficient2 x
|
|
0.2030, !- Coefficient3 x**2
|
|
0.0000, !- Minimum Value of x
|
|
1.0000; !- Maximum Value of x
|
|
|
|
!- 90.1-2010 Path A curves...
|
|
|
|
Curve:Biquadratic,
|
|
AC_2010_PA_CAPFT, !- Name
|
|
1.0433825, !- Coefficient1 Constant
|
|
0.0407073, !- Coefficient2 x
|
|
0.0004506, !- Coefficient3 x**2
|
|
-0.0041514, !- Coefficient4 y
|
|
-0.0000886, !- Coefficient5 y**2
|
|
-0.0003467, !- Coefficient6 x*y
|
|
5.0000, !- Minimum Value of x
|
|
10.0000, !- Maximum Value of x
|
|
12.7, !- Minimum Value of y
|
|
51.67; !- Maximum Value of y
|
|
|
|
Curve:Biquadratic,
|
|
AC_2010_PA_EIRFT, !- Name
|
|
0.5961907, !- Coefficient1 Constant
|
|
-0.0099493, !- Coefficient2 x
|
|
0.0007888, !- Coefficient3 x**2
|
|
0.0004506, !- Coefficient4 y
|
|
0.0004875, !- Coefficient5 y**2
|
|
-0.0007623, !- Coefficient6 x*y
|
|
5.0000, !- Minimum Value of x
|
|
10.0000, !- Maximum Value of x
|
|
12.7, !- Minimum Value of y
|
|
51.67; !- Maximum Value of y
|
|
|
|
Curve:Quadratic,
|
|
AC_LT150_2010_PA_EIRFPLR, !- Name
|
|
0.1410, !- Coefficient1 Constant
|
|
0.6550, !- Coefficient2 x
|
|
0.2030, !- Coefficient3 x**2
|
|
0.0000, !- Minimum Value of x
|
|
1.0000; !- Maximum Value of x
|
|
|
|
Curve:Quadratic,
|
|
AC_GT150_2010_PA_EIRFPLR, !- Name
|
|
0.1410, !- Coefficient1 Constant
|
|
0.6550, !- Coefficient2 x
|
|
0.2030, !- Coefficient3 x**2
|
|
0.0000, !- Minimum Value of x
|
|
1.0000; !- Maximum Value of x
|
|
|
|
|
|
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CURVE:BIQUADRATIC ===========
|
|
|
|
!***** Following curve is from Dick Lord's Chiller Model study for ASHRAE 2007 baseline *****
|
|
|
|
Curve:Biquadratic,
|
|
ChillerCentCapFT, !- Name
|
|
0.7446451, !- Coefficient1 Constant
|
|
0.0114858, !- Coefficient2 x
|
|
0.0000148, !- Coefficient3 x**2
|
|
0.0224010, !- Coefficient4 y
|
|
-0.0006880, !- Coefficient5 y**2
|
|
0.0009839, !- Coefficient6 x*y
|
|
5.0000, !- Minimum Value of x
|
|
10.0000, !- Maximum Value of x
|
|
24.0000, !- Minimum Value of y
|
|
35.0000; !- Maximum Value of y
|
|
!***** Following curve is from Dick Lord's Chiller Model study for ASHRAE 2007 baseline *****
|
|
|
|
Curve:Biquadratic,
|
|
ChillerCentEIRFT, !- Name
|
|
0.7728770, !- Coefficient1 Constant
|
|
0.0221010, !- Coefficient2 x
|
|
-0.0000799, !- Coefficient3 x**2
|
|
-0.0070045, !- Coefficient4 y
|
|
0.0004763, !- Coefficient5 y**2
|
|
-0.0010612, !- Coefficient6 x*y
|
|
5.0000, !- Minimum Value of x
|
|
10.0000, !- Maximum Value of x
|
|
24.0000, !- Minimum Value of y
|
|
35.0000; !- Maximum Value of y
|
|
|
|
|
|
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CURVE:BICUBIC ===========
|
|
!***** Following curve is from Dick Lord's Chiller Model study for ASHRAE 2007 baseline *****
|
|
|
|
Curve:Bicubic,
|
|
ChillerCentEIRPLR, !- Name
|
|
-1.360532E-01, !- Coefficient1 Constant
|
|
8.642703E-03, !- Coefficient2 x
|
|
3.855583E-06, !- Coefficient3 x**2
|
|
1.024034E+00, !- Coefficient4 y
|
|
6.047444E-02, !- Coefficient5 y**2
|
|
-8.947860E-03, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
5.706602E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
31.13, !- Minimum Value of x
|
|
36.52, !- Maximum Value of x
|
|
0.19, !- Minimum Value of y
|
|
1.03; !- Maximum Value of y
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTPUT:VARIABLEDICTIONARY ===========
|
|
|
|
Output:VariableDictionary,IDF,Unsorted;
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTPUT:SURFACES:LIST ===========
|
|
|
|
Output:Surfaces:List,Details;
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTPUT:SURFACES:DRAWING ===========
|
|
|
|
Output:Surfaces:Drawing,DXF;
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTPUT:CONSTRUCTIONS ===========
|
|
|
|
Output:Constructions,Constructions;
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTPUT:TABLE:SUMMARYREPORTS ===========
|
|
|
|
Output:Table:SummaryReports,
|
|
AllSummaryAndMonthly, !- Report 1 Name
|
|
Standard62.1Summary; !- Report 2 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTPUT:TABLE:MONTHLY ===========
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary TaskPurpose ProgressIndicator, !- Name ProgressIndicator,ForDetermination2019, ...
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary CodeName ASHRAE901, !- Name ASHRAE901, ASHRAE1891, IECC, Title24, ORSC, IGCC, ...
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary CodeYear 2019, !- Name all years for ASHRAE90.1, IECC, ASHRAE189.1
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary CodeAmendment NoneAmend, !- Name StateAmend,EEM, NoneAmend for national or state without amendment
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary PrototypeName HotelLarge, !- Name 16 Prototypes
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary TaskScope National, !- Name National, State, City
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary State National, !- Name National for national analysis, NewYork, Utah,... for state analysis, or city name for city analysis. Spell out the name of the state without space between words
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary ClimateZone 6A, !- Name 0-8
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary RepresentCity USA_MN_Rochester, !- Name representative city like Honolulu for national, for each state, for city analysis. this is not the city of the weather file. The weather city will be extracted from epw file
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
!- =========== ALL OBJECTS IN CLASS: OUTPUTCONTROL:TABLE:STYLE ===========
|
|
|
|
OutputControl:Table:Style,
|
|
CommaAndHTML; !- Column Separator
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTPUTCONTROL:REPORTINGTOLERANCES ===========
|
|
|
|
|
|
|
|
OutputControl:ReportingTolerances,
|
|
0.556, !- Tolerance for Time Heating Setpoint Not Met {deltaC}
|
|
0.556; !- Tolerance for Time Cooling Setpoint Not Met {deltaC}
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTPUT:VARIABLE ===========
|
|
|
|
|
|
! Output:Variable,*,Site Outdoor Air Drybulb Temperature,Hourly;
|
|
! Output:Variable,*,Site Outdoor Air Wetbulb Temperature,Hourly;
|
|
! Output:Variable,*,Heating Coil Heating Energy,hourly; !- HVAC Sum J ! the total amount of heat transfer taking place in the coil
|
|
! Output:Variable,*,Cooling Coil Total Cooling Energy,hourly; !- HVAC Sum J ! Energy removed from air loop by Cooling Coils. total amount of heat transfer taking place in the coil
|
|
! Output:Variable,*,Pump Mass Flow Rate,hourly; !- HVAC Average ! the water outlet mass flow rate
|
|
! Output:Variable,*,Fan Air Mass Flow Rate,hourly; !- HVAC Average ! the amount of outdoor air entering the zone
|
|
! Output:Variable,*,Air System Outdoor Air Mass Flow Rate,hourly; !- HVAC Average ! average outdoor air mass flow rate introduced by the outdoor air controller
|
|
! Output:Variable,*,Boiler Heating Energy,hourly; !- HVAC Sum J ! the heating output (load) of the boiler
|
|
! Output:Variable,*,Chiller Evaporator Cooling Energy,hourly; !- HVAC Sum J ! the evaporator heat transfer which is the cooling delivered by the chiller
|
|
|
|
!! Fans named as XXXDUMMY EXHAUST FAN are dummy exhaust fans in the source zone of the
|
|
!! The modeling strategy is documented in Section B.1.2.4 Addendum u: Expands Use of Transfer Air in the "Energy Savings Analysis: ANSI/ASHRAE/IES Standard 90.1-2016" report.
|
|
|
|
!! Additional output variables that can be useful to review the mechancial equipment load profiles
|
|
!! SHW
|
|
! Output:Variable,*,Water Heater Heating Rate,Hourly; !- HVAC Average W The average heating rate supplied by the heater element or burner.
|
|
|
|
!! Outdoor Air
|
|
! Output:Variable,VAV WITH REHEAT_OAINLET NODE,System Node Standard Density Volume Flow Rate,Hourly;
|
|
|
|
!! Return Air
|
|
! Output:Variable,VAV WITH REHEAT Supply Equipment Inlet Node,System Node Temperature,Hourly;
|
|
! Output:Variable,VAV WITH REHEAT Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly;
|
|
! Output:Variable,VAV WITH REHEAT Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
|
|
!! Supply Air
|
|
! Output:Variable,VAV WITH REHEAT SUPPLY EQUIPMENT OUTLET NODE,System Node Standard Density Volume Flow Rate,Hourly;
|
|
! Output:Variable,VAV WITH REHEAT Supply Equipment Outlet Node,System Node Temperature,Hourly;
|
|
! Output:Variable,VAV WITH REHEAT Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly;
|
|
|
|
!! Plant
|
|
! Output:Variable,*,Boiler Heating Rate,Hourly;
|
|
! Output:Variable,*,Chiller Evaporator Cooling Rate,Hourly;
|
|
|
|
!! Coil Load
|
|
! Output:Variable,*,Air System Cooling Coil Total Cooling Energy,Hourly;
|
|
! Output:Variable,*,Air System Heating Coil Total Heating Energy,Hourly;
|
|
|
|
!! Fan and Pump
|
|
! Output:Variable,*,Fan Electric Power,hourly; !- HVAC Average W
|
|
! Output:Variable,*,Pump Electric Power,hourly; !- HVAC Average W
|
|
! Output:Variable,*,Humidifier Electric Power,hourly; !- HVAC Average W
|
|
|
|
!! Utility and Submeter
|
|
! Output:Meter,Electricity:Facility,Hourly;
|
|
! Output:Meter,Gas:Facility,Hourly;
|
|
! Output:Meter,InteriorLights:Electricity,Hourly;
|
|
! Output:Meter,ExteriorLights:Electricity,Hourly;
|
|
! Output:Meter,InteriorEquipment:Electricity,Hourly;
|
|
! Output:Meter,ExteriorEquipment:Electricity,Hourly;
|
|
! Output:Meter,Fans:Electricity,Hourly;
|
|
! Output:Meter,Pumps:Electricity,Hourly;
|
|
! Output:Meter,Heating:Electricity,Hourly;
|
|
! Output:Meter,Cooling:Electricity,Hourly;
|
|
! Output:Meter,HeatRejection:Electricity,Hourly;
|
|
! Output:Meter,Humidifier:Electricity,Hourly;
|
|
! Output:Meter,HeatRecovery:Electricity,Hourly;
|
|
! Output:Meter,DHW:Electricity,Hourly;
|
|
! Output:Meter,Cogeneration:Electricity,Hourly;
|
|
! Output:Meter,Refrigeration:Electricity,Hourly;
|
|
! Output:Meter,WaterSystems:Electricity,Hourly;
|
|
!
|
|
! Output:Meter,InteriorLights:Gas,Hourly;
|
|
! Output:Meter,ExteriorLights:Gas,Hourly;
|
|
! Output:Meter,InteriorEquipment:Gas,Hourly;
|
|
! Output:Meter,ExteriorEquipment:Gas,Hourly;
|
|
! Output:Meter,Fans:Gas,Hourly;
|
|
! Output:Meter,Pumps:Gas,Hourly;
|
|
! Output:Meter,Heating:Gas,Hourly;
|
|
! Output:Meter,Cooling:Gas,Hourly;
|
|
! Output:Meter,HeatRejection:Gas,Hourly;
|
|
! Output:Meter,Humidifier:Gas,Hourly;
|
|
! Output:Meter,HeatRecovery:Gas,Hourly;
|
|
! Output:Meter,DHW:Gas,Hourly;
|
|
! Output:Meter,Cogeneration:Gas,Hourly;
|
|
! Output:Meter,Refrigeration:Gas,Hourly;
|
|
! Output:Meter,WaterSystems:Gas,Hourly;
|
|
|
|
!! additional output variables added on 07 29 2016
|
|
! Output:Variable,*,Chiller Condenser Heat Transfer Energy,hourly; !- HVAC Sum J
|
|
! Output:Variable,*,Chiller Condenser Inlet Temperature,hourly; !- HVAC Average C
|
|
! Output:Variable,*,Chiller Condenser Outlet Temperature,hourly; !- HVAC Average C
|
|
! Output:Variable,*,Pump Shaft Power,hourly; !- HVAC Average W
|
|
! Output:Variable,*,Pump Outlet Temperature,hourly; !- HVAC Average C
|
|
|
|
|
|
|
|
Output:Meter:MeterFileOnly,InteriorLights:Electricity,Hourly;
|
|
|
|
Output:Meter:MeterFileOnly,InteriorEquipment:Electricity,Hourly;
|
|
|
|
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Facility_Int_LTG, !- Name
|
|
, !- Output:Variable or Output:Meter Index Key Name
|
|
InteriorLights:Electricity; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:GlobalVariable,
|
|
Wired_LTG; !- Erl Variable 1 Name
|
|
|
|
EnergyManagementSystem:Program,
|
|
Transformer_Load_Prog, !- Name
|
|
SET Wired_LTG = Facility_Int_LTG*0.0352; !- Program Line 1
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
Transformer_Load_Prog_Manager, !- Name
|
|
AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point
|
|
Transformer_Load_Prog; !- Program Name 1
|
|
|
|
EnergyManagementSystem:OutputVariable,
|
|
Wired_LTG, !- Name
|
|
Wired_LTG, !- EMS Variable Name
|
|
Summed, !- Type of Data in Variable
|
|
ZoneTimeStep, !- Update Frequency
|
|
, !- EMS Program or Subroutine Name
|
|
J; !- Units
|
|
|
|
Meter:Custom,
|
|
Wired_LTG_Electricity, !- Name
|
|
Electricity, !- Fuel Type
|
|
, !- Key Name 1
|
|
Wired_LTG; !- Output Variable or Meter Name 1
|
|
|
|
ElectricLoadCenter:Transformer,
|
|
Transformer 1, !- Name
|
|
Always_On, !- Availability Schedule Name
|
|
PowerInFromGrid, !- Transformer Usage
|
|
, !- Zone Name
|
|
, !- Radiative Fraction
|
|
150000, !- Rated Capacity {VA}
|
|
3, !- Phase
|
|
Aluminum, !- Conductor Material
|
|
150, !- Full Load Temperature Rise {C}
|
|
0.1, !- Fraction of Eddy Current Losses
|
|
NominalEfficiency, !- Performance Input Method
|
|
, !- Rated No Load Loss {W}
|
|
, !- Rated Load Loss {W}
|
|
0.988, !- Nameplate Efficiency
|
|
0.35, !- Per Unit Load for Nameplate Efficiency
|
|
75, !- Reference Temperature for Nameplate Efficiency {C}
|
|
, !- Per Unit Load for Maximum Efficiency
|
|
Yes, !- Consider Transformer Loss for Utility Cost
|
|
Wired_LTG_Electricity, !- Meter 1 Name
|
|
InteriorEquipment:Electricity; !- Meter 2 Name
|
|
|
|
|
|
|
|
EnergyManagementSystem:GlobalVariable,
|
|
BoilerType, !- Erl Variable 1 Name
|
|
CapRated, !- Erl Variable 2 Name
|
|
EtRated, !- Erl Variable 3 Name
|
|
PLRx, !- <none>
|
|
Ecx, !- <none>
|
|
SkinLossRate; !- <none>
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
BoilerPLR, !- Name
|
|
HeatSys1 Boiler, !- Output:Variable or Output:Meter Index Key Name
|
|
Boiler Part Load Ratio; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
BoilerCurve, !- Name
|
|
HEATSYS1 BOILER EFFICIENCY CURVE, !- Actuated Component Unique Name
|
|
Curve, !- Actuated Component Type
|
|
Curve Result; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Program, ! Addendum AM
|
|
SetBoilerPar,
|
|
SET CapRated = 596723.5, ! EMS Bolier Nominal Capacity {W}.
|
|
SET EtRated = 0.8, ! EMS Boiler Nominal Thermal Efficiency. overriden by script
|
|
SET CapRated = (CapRated *3.412)/1000, !Change from W to MBH
|
|
SET SkinLossRate = 0.02,
|
|
SET BoilerType = 1,
|
|
IF BoilerType == 1,
|
|
IF CapRated >10000,
|
|
SET PLRx = 0.2,
|
|
ELSEIF CapRated >5000,
|
|
SET PLRx = 0.25,
|
|
ELSEIF CapRated >1000,
|
|
SET PLRx = 0.33,
|
|
ELSE,
|
|
SET BoilerType = 2,
|
|
SET PLRx = 0.2,
|
|
ENDIF,
|
|
ELSE,
|
|
SET PLRx = 0.2,
|
|
ENDIF,
|
|
IF BoilerType == 1,
|
|
SET CurveX = 0.975 + 0.305 * PLRx - 0.527 * (PLRx^2) + 0.249 * (PLRx^3),
|
|
ELSE,
|
|
SET CurveX = 0.907 + 0.320 * PLRx - 0.420 * (PLRx^2) + 0.193 * (PLRx^3),
|
|
ENDIF,
|
|
SET LoadX = CapRated * PLRx,
|
|
SET Etx = CurveX * EtRated,
|
|
SET InputEx = LoadX/Etx,
|
|
SET SkinEx = CapRated * SkinLossRate,
|
|
SET Ecx = (LoadX + SkinEx)/InputEx;
|
|
EnergyManagementSystem:Program,
|
|
SetBoilerCurve, !- Name
|
|
IF BoilerPLR >= PLRx, !- Program Line 1
|
|
IF BoilerType == 1, !- Program Line 2
|
|
SET BoilerCurve = 0.975 + 0.305*BoilerPLR - 0.527*(BoilerPLR^2) + 0.249*(BoilerPLR^3), !- <none>
|
|
ELSE, !- <none>
|
|
SET BoilerCurve = 0.907 + 0.320*BoilerPLR - 0.420*(BoilerPLR^2) + 0.193*(BoilerPLR^3), !- <none>
|
|
ENDIF, !- <none>
|
|
ELSE, !- <none>
|
|
IF BoilerPLR == 0, !- <none>
|
|
SET BoilerCurve = NULL, !- <none>
|
|
ELSE, !- <none>
|
|
IF BoilerPLR <0.05, !- <none>
|
|
SET BoilerCurve = (0.05/(0.05 + SkinLossRate)) * (Ecx/EtRated), !- <none>
|
|
ELSE, !- <none>
|
|
SET BoilerCurve = (BoilerPLR/(BoilerPLR + SkinLossRate)) * (Ecx/EtRated), !- <none>
|
|
ENDIF, !- <none>
|
|
ENDIF, !- <none>
|
|
ENDIF; !- <none>
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
BoilerParManager, !- Name
|
|
BeginNewEnvironment, !- EnergyPlus Model Calling Point
|
|
SetBoilerPar; !- Program Name 1
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
BoilerCurveManager, !- Name
|
|
InsideHVACSystemIterationLoop, !- EnergyPlus Model Calling Point
|
|
SetBoilerCurve; !- Program Name 1
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ZONEVENTILATION:WINDANDSTACKOPENAREA ===========
|
|
|
|
ZoneVentilation:WindandStackOpenArea,
|
|
ROOM_1_FLR_3 Sliding Door Ventilation, !- Name
|
|
ROOM_1_FLR_3, !- Zone Name
|
|
0.0200, !- Opening Area {m2}
|
|
Sliding_Doors_Ventilation_Availability_SCH, !- Opening Area Fraction Schedule Name
|
|
autocalculate, !- Opening Effectiveness {dimensionless}
|
|
180, !- Effective Angle {deg}
|
|
9.6007, !- Height Difference {m}
|
|
autocalculate, !- Discharge Coefficient for Opening
|
|
18.89, !- Minimum Indoor Temperature {C}
|
|
, !- Minimum Indoor Temperature Schedule Name
|
|
25.56, !- Maximum Indoor Temperature {C}
|
|
, !- Maximum Indoor Temperature Schedule Name
|
|
-100, !- Delta Temperature {deltaC}
|
|
, !- Delta Temperature Schedule Name
|
|
15.56, !- Minimum Outdoor Temperature {C}
|
|
, !- Minimum Outdoor Temperature Schedule Name
|
|
26.67, !- Maximum Outdoor Temperature {C}
|
|
, !- Maximum Outdoor Temperature Schedule Name
|
|
40; !- Maximum Wind Speed {m/s}
|
|
|
|
ZoneVentilation:WindandStackOpenArea,
|
|
ROOM_2_FLR_3 Sliding Door Ventilation, !- Name
|
|
ROOM_2_FLR_3, !- Zone Name
|
|
0.0200, !- Opening Area {m2}
|
|
Sliding_Doors_Ventilation_Availability_SCH, !- Opening Area Fraction Schedule Name
|
|
autocalculate, !- Opening Effectiveness {dimensionless}
|
|
0, !- Effective Angle {deg}
|
|
9.6007, !- Height Difference {m}
|
|
autocalculate, !- Discharge Coefficient for Opening
|
|
18.89, !- Minimum Indoor Temperature {C}
|
|
, !- Minimum Indoor Temperature Schedule Name
|
|
25.56, !- Maximum Indoor Temperature {C}
|
|
, !- Maximum Indoor Temperature Schedule Name
|
|
-100, !- Delta Temperature {deltaC}
|
|
, !- Delta Temperature Schedule Name
|
|
15.56, !- Minimum Outdoor Temperature {C}
|
|
, !- Minimum Outdoor Temperature Schedule Name
|
|
26.67, !- Maximum Outdoor Temperature {C}
|
|
, !- Maximum Outdoor Temperature Schedule Name
|
|
40; !- Maximum Wind Speed {m/s}
|
|
|
|
ZoneVentilation:WindandStackOpenArea,
|
|
ROOM_3_MULT19_FLR_3 Sliding Door Ventilation, !- Name
|
|
ROOM_3_MULT19_FLR_3, !- Zone Name
|
|
0.0200, !- Opening Area {m2}
|
|
Sliding_Doors_Ventilation_Availability_SCH, !- Opening Area Fraction Schedule Name
|
|
autocalculate, !- Opening Effectiveness {dimensionless}
|
|
180, !- Effective Angle {deg}
|
|
9.6007, !- Height Difference {m}
|
|
autocalculate, !- Discharge Coefficient for Opening
|
|
18.89, !- Minimum Indoor Temperature {C}
|
|
, !- Minimum Indoor Temperature Schedule Name
|
|
25.56, !- Maximum Indoor Temperature {C}
|
|
, !- Maximum Indoor Temperature Schedule Name
|
|
-100, !- Delta Temperature {deltaC}
|
|
, !- Delta Temperature Schedule Name
|
|
15.56, !- Minimum Outdoor Temperature {C}
|
|
, !- Minimum Outdoor Temperature Schedule Name
|
|
26.67, !- Maximum Outdoor Temperature {C}
|
|
, !- Maximum Outdoor Temperature Schedule Name
|
|
40; !- Maximum Wind Speed {m/s}
|
|
|
|
ZoneVentilation:WindandStackOpenArea,
|
|
ROOM_4_MULT19_FLR_3 Sliding Door Ventilation, !- Name
|
|
ROOM_4_MULT19_FLR_3, !- Zone Name
|
|
0.0200, !- Opening Area {m2}
|
|
Sliding_Doors_Ventilation_Availability_SCH, !- Opening Area Fraction Schedule Name
|
|
autocalculate, !- Opening Effectiveness {dimensionless}
|
|
0, !- Effective Angle {deg}
|
|
9.6007, !- Height Difference {m}
|
|
autocalculate, !- Discharge Coefficient for Opening
|
|
18.89, !- Minimum Indoor Temperature {C}
|
|
, !- Minimum Indoor Temperature Schedule Name
|
|
25.56, !- Maximum Indoor Temperature {C}
|
|
, !- Maximum Indoor Temperature Schedule Name
|
|
-100, !- Delta Temperature {deltaC}
|
|
, !- Delta Temperature Schedule Name
|
|
15.56, !- Minimum Outdoor Temperature {C}
|
|
, !- Minimum Outdoor Temperature Schedule Name
|
|
26.67, !- Maximum Outdoor Temperature {C}
|
|
, !- Maximum Outdoor Temperature Schedule Name
|
|
40; !- Maximum Wind Speed {m/s}
|
|
|
|
ZoneVentilation:WindandStackOpenArea,
|
|
ROOM_5_FLR_3 Sliding Door Ventilation, !- Name
|
|
ROOM_5_FLR_3, !- Zone Name
|
|
0.0200, !- Opening Area {m2}
|
|
Sliding_Doors_Ventilation_Availability_SCH, !- Opening Area Fraction Schedule Name
|
|
autocalculate, !- Opening Effectiveness {dimensionless}
|
|
180, !- Effective Angle {deg}
|
|
9.6007, !- Height Difference {m}
|
|
autocalculate, !- Discharge Coefficient for Opening
|
|
18.89, !- Minimum Indoor Temperature {C}
|
|
, !- Minimum Indoor Temperature Schedule Name
|
|
25.56, !- Maximum Indoor Temperature {C}
|
|
, !- Maximum Indoor Temperature Schedule Name
|
|
-100, !- Delta Temperature {deltaC}
|
|
, !- Delta Temperature Schedule Name
|
|
15.56, !- Minimum Outdoor Temperature {C}
|
|
, !- Minimum Outdoor Temperature Schedule Name
|
|
26.67, !- Maximum Outdoor Temperature {C}
|
|
, !- Maximum Outdoor Temperature Schedule Name
|
|
40; !- Maximum Wind Speed {m/s}
|
|
|
|
ZoneVentilation:WindandStackOpenArea,
|
|
ROOM_6_FLR_3 Sliding Door Ventilation, !- Name
|
|
ROOM_6_FLR_3, !- Zone Name
|
|
0.0200, !- Opening Area {m2}
|
|
Sliding_Doors_Ventilation_Availability_SCH, !- Opening Area Fraction Schedule Name
|
|
autocalculate, !- Opening Effectiveness {dimensionless}
|
|
0, !- Effective Angle {deg}
|
|
9.6007, !- Height Difference {m}
|
|
autocalculate, !- Discharge Coefficient for Opening
|
|
18.89, !- Minimum Indoor Temperature {C}
|
|
, !- Minimum Indoor Temperature Schedule Name
|
|
25.56, !- Maximum Indoor Temperature {C}
|
|
, !- Maximum Indoor Temperature Schedule Name
|
|
-100, !- Delta Temperature {deltaC}
|
|
, !- Delta Temperature Schedule Name
|
|
15.56, !- Minimum Outdoor Temperature {C}
|
|
, !- Minimum Outdoor Temperature Schedule Name
|
|
26.67, !- Maximum Outdoor Temperature {C}
|
|
, !- Maximum Outdoor Temperature Schedule Name
|
|
40; !- Maximum Wind Speed {m/s}
|
|
|
|
ZoneVentilation:WindandStackOpenArea,
|
|
ROOM_1_FLR_6 Sliding Door Ventilation, !- Name
|
|
ROOM_1_FLR_6, !- Zone Name
|
|
0.0200, !- Opening Area {m2}
|
|
Sliding_Doors_Ventilation_Availability_SCH, !- Opening Area Fraction Schedule Name
|
|
autocalculate, !- Opening Effectiveness {dimensionless}
|
|
180, !- Effective Angle {deg}
|
|
9.6007, !- Height Difference {m}
|
|
autocalculate, !- Discharge Coefficient for Opening
|
|
18.89, !- Minimum Indoor Temperature {C}
|
|
, !- Minimum Indoor Temperature Schedule Name
|
|
25.56, !- Maximum Indoor Temperature {C}
|
|
, !- Maximum Indoor Temperature Schedule Name
|
|
-100, !- Delta Temperature {deltaC}
|
|
, !- Delta Temperature Schedule Name
|
|
15.56, !- Minimum Outdoor Temperature {C}
|
|
, !- Minimum Outdoor Temperature Schedule Name
|
|
26.67, !- Maximum Outdoor Temperature {C}
|
|
, !- Maximum Outdoor Temperature Schedule Name
|
|
40; !- Maximum Wind Speed {m/s}
|
|
|
|
ZoneVentilation:WindandStackOpenArea,
|
|
ROOM_2_FLR_6 Sliding Door Ventilation, !- Name
|
|
ROOM_2_FLR_6, !- Zone Name
|
|
0.0200, !- Opening Area {m2}
|
|
Sliding_Doors_Ventilation_Availability_SCH, !- Opening Area Fraction Schedule Name
|
|
autocalculate, !- Opening Effectiveness {dimensionless}
|
|
0, !- Effective Angle {deg}
|
|
9.6007, !- Height Difference {m}
|
|
autocalculate, !- Discharge Coefficient for Opening
|
|
18.89, !- Minimum Indoor Temperature {C}
|
|
, !- Minimum Indoor Temperature Schedule Name
|
|
25.56, !- Maximum Indoor Temperature {C}
|
|
, !- Maximum Indoor Temperature Schedule Name
|
|
-100, !- Delta Temperature {deltaC}
|
|
, !- Delta Temperature Schedule Name
|
|
15.56, !- Minimum Outdoor Temperature {C}
|
|
, !- Minimum Outdoor Temperature Schedule Name
|
|
26.67, !- Maximum Outdoor Temperature {C}
|
|
, !- Maximum Outdoor Temperature Schedule Name
|
|
40; !- Maximum Wind Speed {m/s}
|
|
|
|
ZoneVentilation:WindandStackOpenArea,
|
|
ROOM_3_MULT9_FLR_6 Sliding Door Ventilation, !- Name
|
|
ROOM_3_MULT9_FLR_6, !- Zone Name
|
|
0.0200, !- Opening Area {m2}
|
|
Sliding_Doors_Ventilation_Availability_SCH, !- Opening Area Fraction Schedule Name
|
|
autocalculate, !- Opening Effectiveness {dimensionless}
|
|
180, !- Effective Angle {deg}
|
|
9.6007, !- Height Difference {m}
|
|
autocalculate, !- Discharge Coefficient for Opening
|
|
18.89, !- Minimum Indoor Temperature {C}
|
|
, !- Minimum Indoor Temperature Schedule Name
|
|
25.56, !- Maximum Indoor Temperature {C}
|
|
, !- Maximum Indoor Temperature Schedule Name
|
|
-100, !- Delta Temperature {deltaC}
|
|
, !- Delta Temperature Schedule Name
|
|
15.56, !- Minimum Outdoor Temperature {C}
|
|
, !- Minimum Outdoor Temperature Schedule Name
|
|
26.67, !- Maximum Outdoor Temperature {C}
|
|
, !- Maximum Outdoor Temperature Schedule Name
|
|
40; !- Maximum Wind Speed {m/s}
|
|
|
|
|
|
Schedule:Compact,
|
|
Sliding_Doors_Ventilation_Availability_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: WinterDesignDay SummerDesignDay, !- Field 2
|
|
Until: 24:00, !- Field 3
|
|
0, !- Field 4
|
|
For: Allotherdays, !- Field 5
|
|
Until: 6:00, !- Field 6
|
|
0, !- Field 7
|
|
Until: 9:00,
|
|
1,
|
|
Until: 16:00,
|
|
0,
|
|
Until: 22:00, !- Field 8
|
|
1, !- Field 9
|
|
Until: 24:00, !- Field 10
|
|
0; !- Field 11
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
ROOM_3_MULT19_FLR_3_Sliding_Door_Ventilation_Sensor, !- Name
|
|
ROOM_3_MULT19_FLR_3, !- Output:Variable or Output:Meter Index Key Name
|
|
Zone Ventilation Standard Density Volume Flow Rate; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
ROOM_4_MULT19_FLR_3_Sliding_Door_Ventilation_Sensor, !- Name
|
|
ROOM_4_MULT19_FLR_3, !- Output:Variable or Output:Meter Index Key Name
|
|
Zone Ventilation Standard Density Volume Flow Rate; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
S_Guestroom_CLGSETP_Actuator, ! Name
|
|
OBCReset_S_OccGuestRoom_ClgSP_Sch_20min, !- Actuated Component Unique Name
|
|
Schedule:Compact, ! Actuated Component Type
|
|
Schedule Value; ! Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
S_Guestroom_HTGSETP_Actuator, ! Name
|
|
OBCReset_S_OccGuestRoom_HtgSP_Sch_20min, !- Actuated Component Unique Name
|
|
Schedule:Compact, ! Actuated Component Type
|
|
Schedule Value; ! Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
N_Guestroom_CLGSETP_Actuator, ! Name
|
|
OBCReset_N_OccGuestRoom_ClgSP_Sch_20min, !- Actuated Component Unique Name
|
|
Schedule:Compact, ! Actuated Component Type
|
|
Schedule Value; ! Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
N_Guestroom_HTGSETP_Actuator, ! Name
|
|
OBCReset_N_OccGuestRoom_HtgSP_Sch_20min, !- Actuated Component Unique Name
|
|
Schedule:Compact, ! Actuated Component Type
|
|
Schedule Value; ! Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
Door_Switch_Enabled_Thermostat_Reset, ! Name
|
|
BeginTimestepBeforePredictor, ! EnergyPlus Model Calling Point
|
|
Door_Switch_Enabled_Thermostat_Reset_Program_N_Guestroom,
|
|
Door_Switch_Enabled_Thermostat_Reset_Program_S_Guestroom;
|
|
|
|
|
|
EnergyManagementSystem:Program,
|
|
Door_Switch_Enabled_Thermostat_Reset_Program_S_Guestroom, ! Name
|
|
IF (ROOM_3_MULT19_FLR_3_Sliding_Door_Ventilation_Sensor > 0),
|
|
SET S_Guestroom_CLGSETP_Actuator = 32.22,
|
|
SET S_Guestroom_HTGSETP_Actuator = 12.78,
|
|
ELSE,
|
|
SET S_Guestroom_CLGSETP_Actuator = null,
|
|
SET S_Guestroom_HTGSETP_Actuator = null,
|
|
ENDIF;
|
|
|
|
EnergyManagementSystem:Program,
|
|
Door_Switch_Enabled_Thermostat_Reset_Program_N_Guestroom, ! Name
|
|
IF (ROOM_4_MULT19_FLR_3_Sliding_Door_Ventilation_Sensor > 0),
|
|
SET N_Guestroom_CLGSETP_Actuator = 32.22,
|
|
SET N_Guestroom_HTGSETP_Actuator = 12.78,
|
|
ELSE,
|
|
SET N_Guestroom_CLGSETP_Actuator = null,
|
|
SET N_Guestroom_HTGSETP_Actuator = null,
|
|
ENDIF;
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
VAV_WITH_REHEAT_OA_VRP, !- Name
|
|
VAV WITH REHEAT, !- Output:Variable or Output:Meter Index Key Name
|
|
Air System Outdoor Air Mechanical Ventilation Requested Mass Flow Rate; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
VAV_WITH_REHEAT_OA, !- Name
|
|
VAV WITH REHEAT, !- Output:Variable or Output:Meter Index Key Name
|
|
Air System Outdoor Air Mass Flow Rate; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
VAV_WITH_REHEAT_SUPPLY_FLOW, !- Name
|
|
VAV WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Output:Variable or Output:Meter Index Key Name
|
|
System Node Standard Density Volume Flow Rate; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
VAV_WITH_REHEAT_MAX_OA_FRAC, !- Name
|
|
VAV WITH REHEAT Max OA Fraction, !- Actuated Component Unique Name
|
|
Schedule:Constant, !- Actuated Component Type
|
|
Schedule Value; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
VAV_WITH_REHEAT_MAX_OA_FRAC_Prog_Manager,!- Name
|
|
AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point
|
|
VAV_WITH_REHEAT_MAX_OA_FRAC; !- Program Name 1
|
|
|
|
EnergyManagementSystem:Program,
|
|
VAV_WITH_REHEAT_MAX_OA_FRAC, !- Name
|
|
IF VAV_WITH_REHEAT_OA > VAV_WITH_REHEAT_OA_VRP, !- Program Line 1
|
|
SET VAV_WITH_REHEAT_MAX_OA_FRAC = NULL, !- Program Line 2
|
|
ELSE, !- A4
|
|
IF VAV_WITH_REHEAT_SUPPLY_FLOW > 0, !- A5
|
|
SET VAV_WITH_REHEAT_MAX_OA_FRAC = / VAV_WITH_REHEAT_SUPPLY_FLOW,!- A6
|
|
ELSE, !- A7
|
|
SET VAV_WITH_REHEAT_MAX_OA_FRAC = NULL, !- A8
|
|
ENDIF, !- A9
|
|
ENDIF; !- A10
|
|
|
|
|
|
|
|
|