5968 lines
274 KiB
Plaintext
5968 lines
274 KiB
Plaintext
|
|
!The DOE Prototype Building Models were developed by Pacific Northwest National Laboratory (PNNL), under contract with the U.S.
|
|
!Department of Energy (DOE). These building models were derived from DOE's Commercial Reference Building Models with modifications
|
|
!based on input from the ASHRAE Standard 90.1 committee, the Advanced Energy Design Guide series, and building industry experts. The
|
|
!prototypes models were developed to quantify energy saving impacts from newly published editions of ASHRAE Standard 90.1, 189.1, IECC,
|
|
!and other energy codes and standards. The basic building descriptions can be found in the Scorecards posted at www.energycodes.gov
|
|
!website. The recommended citation of the prototype models is
|
|
!
|
|
!DOE and PNNL. 2020. Commercial Prototype Building Models, Richland, WA, Pacific Northwest National Laboratory. Available at https://www.energycodes.gov/development/commercial/prototype_models.
|
|
!
|
|
!Detailed descriptions of the prototype model development and addenda modeling strategies can be found in the following reports:
|
|
!DOE, 2020. Preliminary Energy Savings Analysis: ANSI/ASHRAE/IES Standard 90.1-2019. Report prepared by Zhang, J., M. Rosenberg, J.
|
|
!Lerond, Y. Xie, Nambia, C., Y. Chen, R. Hart, M. Halverson, D. Maddox, and S. Goel, Richland, WA, Pacific Northwest National Laboratory.
|
|
!
|
|
!Zhang, J., Y. Chen, Y. Xie, M. Rosenberg, R. Hart. Energy and Energy Cost Savings Analysis of the 2018 IECC for Commercial Buildings.
|
|
!2018. PNNL-28125. Richland, WA: Pacific Northwest National Laboratory.
|
|
!
|
|
!DOE. 2017. Energy Savings Analysis: ANSI/ASHRAE/IES Standard 90.1-2016. Prepared by Athalye, R.A, M.A. Halverson, M.I. Rosenberg, B. Liu,
|
|
!J. Zhang, R. Hart, V.V. Mendon, S. Goel, Y. Chen, Y. Xie, and M. Zhao, Richland, WA, Pacific Northwest National Laboratory. https://www.energycodes.gov/sites/default/files/documents/02202018_Standard_90.1-2016_Determination_TSD.pdf.
|
|
!
|
|
!Zhang, J., Y. Xie, R.A. Athalye, J. Zhuge, M. Rosenberg, R. Hart, and B. Liu. Energy and Energy Cost Savings Analysis of the 2015 IECC
|
|
!for Commercial Buildings. 2015. PNNL-24269 Rev. 1. Richland, WA: Pacific Northwest National
|
|
!Laboratory. https://www.energycodes.gov/sites/default/files/documents/2015_IECC_Commercial_Analysis.pdf.
|
|
!
|
|
!Halverson M.A., M.I. Rosenberg, W. Wang, J. Zhang, V.V. Mendon, R.A. Athalye, Y. Xie, R. Hart, S. Goel, 2014. ANSI/ASHRAE/IES Standard
|
|
!90.1-2013 Determination of Energy Savings: Quantitative Analysis, PNNL-23479. Richland, WA: Pacific Northwest National Laboratory. https://www.energycodes.gov/sites/default/files/documents/901-2013_finalCommercialDeterminationQuantitativeAnalysis_TSD_0.pdf.
|
|
!
|
|
!Goel S., R.A. Athalye, W. Wang, J. Zhang, M.I. Rosenberg, Y. Xie, and R. Hart, et al. 2014. Enhancements to ASHRAE Standard 90.1
|
|
!Prototype Building Models. PNNL-23269. Richland, WA: Pacific Northwest National Laboratory. https://www.pnnl.gov/main/publications/external/technical_reports/PNNL-23269.pdf.
|
|
!
|
|
!Zhang J., R.A. Athalye, R. Hart, M.I. Rosenberg, Y. Xie, S. Goel, and V.V. Mendon, et al. 2013. Energy and Energy Cost Savings Analysis
|
|
!of the IECC for Commercial Buildings. PNNL-22760. Richland, WA: Pacific Northwest National Laboratory. http://www.pnnl.gov/main/publications/external/technical_reports/PNNL-22760.pdf.
|
|
!
|
|
!Thornton B.A., M.I. Rosenberg, E.E. Richman, W. Wang, Y. Xie, J. Zhang, H. Cho, VV Mendon, R.A. Athalye, and B. Liu. 2011. Achieving
|
|
!the 30% Goal: Energy and Cost Savings Analysis of ASHRAE Standard 90.1-2010. PNNL-20405. Richland, WA: Pacific Northwest National
|
|
!Laboratory. https://www.energycodes.gov/sites/default/files/documents/BECP_Energy_Cost_Savings_STD2010_May2011_v00.pdf.
|
|
!
|
|
!
|
|
! WeatherFile: USA_MN_Rochester.Intl.AP.726440_TMY3.epw
|
|
|
|
|
|
|
|
! BEGIN ECONOMIZER MAP
|
|
! Economizer Name, DX COIL Name
|
|
! PSZ-AC:1_OA_Controller, PSZ-AC:1_Unitary_Package_CoolCoil
|
|
! PSZ-AC:2_OA_Controller, PSZ-AC:2_Unitary_Package_CoolCoil
|
|
! PSZ-AC:3_OA_Controller, PSZ-AC:3_Unitary_Package_CoolCoil
|
|
! PSZ-AC:4_OA_Controller, PSZ-AC:4_Unitary_Package_CoolCoil
|
|
! END ECONOMIZER MAP
|
|
!
|
|
!
|
|
! BEGIN EMS PROGRAM MAP
|
|
! EMS PROGRAM, DX COIL Name
|
|
! PSZ1, PSZ-AC:1_Unitary_Package_CoolCoil
|
|
! PSZ2, PSZ-AC:2_Unitary_Package_CoolCoil
|
|
! PSZ3, PSZ-AC:3_Unitary_Package_CoolCoil
|
|
! PSZ4, PSZ-AC:4_Unitary_Package_CoolCoil
|
|
! END EMS PROGRAM MAP
|
|
|
|
|
|
! GPARM parameters as input:
|
|
! Case = ASHRAE901_RetailStandalone_STD2019_Rochester
|
|
! SelectedCase =
|
|
! ground_tempt = National_RetailStandalone_ASHRAE901_STD2016_Zone6A_nonres_MN-Rochester-MN.gtp
|
|
! avg_oa_tempt_ip = 43.475
|
|
! maxdiff_oa_tempt_ip = 60.3
|
|
! ext_wall_type = MassWall
|
|
! nonres_ext_wall_ufactor = 0.45426104
|
|
! roof_type = LightweightRoof
|
|
! nonres_roof_ufactor = 0.181704416
|
|
! nonres_window =
|
|
! roof_emissivity = 0.9
|
|
! roof_solar_absorp = 0.77
|
|
! LPD_back = 4.673933137
|
|
! LPD_core = 11.30210594
|
|
! LPD_front = 11.30210594
|
|
! LPD_sale = 11.30210594
|
|
! LPD_entry = 9.04168475
|
|
! exterior_lights_watts =
|
|
! exterior_lights_watts_a = 316.3
|
|
! exterior_lights_watts_b = 3054.9
|
|
! economizer = DifferentialDryBulb
|
|
! skip_economizer_control = No
|
|
! cc_sa_humidity = 0.0085
|
|
! damper_sch = MinOA_MotorizedDamper_Sched
|
|
! skylights = d_ab
|
|
! nonres_skylight =
|
|
! daylighting_control = d_ab
|
|
! Back_Space_SZ_VAV = No
|
|
! Core_Retail_SZ_VAV = No
|
|
! avg_oa_tempt = 6.375
|
|
! maxdiff_oa_tempt = 33.5
|
|
! infil = 0.00056896
|
|
! OA_back = 0.000609562
|
|
! OA_core = 0.001181026
|
|
! OA_front = 0.001181026
|
|
! OA_sale = 0.001181026
|
|
! OA_entry = 0.001181026
|
|
! door_infil = 0.937286742
|
|
! frac_ofpk = 0.131
|
|
! PSZ_AC_2_ERV = No
|
|
! economizer_lockout = LockoutWithHeating
|
|
! frame_width = 0
|
|
! frame_cond = 0
|
|
! frame = Skylight_Frame
|
|
! BLDG_EQUIP_SCH = BLDG_EQUIP_SCH_ADV
|
|
! addendum_cd = 2016AS
|
|
! pv_generator = no
|
|
! pv_surface_area = 0
|
|
! STD189_overhang = no
|
|
! swh_et = 0.82
|
|
! swh_ua = 4.10807252
|
|
! ext_lgt_sch = Exterior_Lgt_ALWAYS_ON
|
|
! LTG_SCH_SET = LTG_SET_STD2013
|
|
! PSZ_AC_2_ERV_power = 1406.225675
|
|
! HtgSetP_Sch = HTGSETP_SCH_NO_OPTIMUM
|
|
! ClgSetP_Sch = CLGSETP_SCH_NO_SETBACK
|
|
! pipe_heat_loss = 1860
|
|
! skip_EMSprogram = no
|
|
! HtgSetP_Sch_PSZ_AC_2 = HTGSETP_SCH_YES_OPTIMUM
|
|
! ClgSetP_Sch_PSZ_AC_2 = CLGSETP_SCH_YES_OPTIMUM
|
|
! OA_BASED_OPTIMUM_START_EMS = yes
|
|
! OPTIMUM_START_SF_DEPENDENT_EMS = no
|
|
! Wfile_TMY3 = USA_MN_Rochester.Intl.AP.726440_TMY3.epw
|
|
! loadProfile = No
|
|
! HtgSetP_Sch_FrontEntry = HTGSETP_SCH_FrontEntry_STD2013
|
|
! receptacle_ctrl_occ_reduction_frac = 0.997200822
|
|
! receptacle_ctrl_unocc_reduction_frac = 0.986862812
|
|
! CodeName = ASHRAE90.1_STD2019
|
|
! CZ_City_Old = Burlington
|
|
! CZ_Label = 6A
|
|
! Addendum_AH = Yes
|
|
! LPD_Ctrl = 0.02
|
|
! con_swingdoor_r = 0.475963827
|
|
! con_overheaddoor_r = 0.567741935
|
|
! nonres_window_u_factor = 0.34
|
|
! nonres_window_shgc = 0.38
|
|
! nonresLSG = 1.1
|
|
! nonres_skylight_u_factor = 0.47
|
|
! nonres_skylight_shgc = 0.4
|
|
! nonresskyltLSG = 1
|
|
! AnalysisPurpose = ProgressIndicator
|
|
! AnalysisCodeName = ASHRAE901
|
|
! AnalysisCodeYear = 2019
|
|
! AnalysisAmendment = NoneAmend
|
|
! AnalysisPrototype = RetailStandalone
|
|
! AnalysisScope = National
|
|
! AnalysisState = National
|
|
! AnalysisClimateZone = 6A
|
|
! AnalysisCity = USA_MN_Rochester
|
|
! var_Ffactor_IP = 0.51
|
|
! var_Cfactor_IP = 0.092
|
|
! Water_Heater_flow = 1.89e-05
|
|
|
|
|
|
|
|
|
|
|
|
|
|
! specify overhang_pf for 1891 codes
|
|
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: VERSION ===========
|
|
|
|
|
|
|
|
Version,9.0;
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SIMULATIONCONTROL ===========
|
|
|
|
SimulationControl,
|
|
Yes, !- Do Zone Sizing Calculation
|
|
Yes, !- Do System Sizing Calculation
|
|
Yes, !- Do Plant Sizing Calculation
|
|
No, !- Run Simulation for Sizing Periods
|
|
YES; !- Run Simulation for Weather File Run Periods
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: BUILDING ===========
|
|
|
|
Building,
|
|
RetailStandalone, !- Name
|
|
0.0000, !- North Axis {deg}
|
|
City, !- Terrain
|
|
0.0400, !- Loads Convergence Tolerance Value
|
|
0.2000, !- Temperature Convergence Tolerance Value {deltaC}
|
|
FullInteriorAndExterior, !- Solar Distribution
|
|
25, !- Maximum Number of Warmup Days
|
|
6; !- Minimum Number of Warmup Days
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SHADOWCALCULATION ===========
|
|
|
|
ShadowCalculation,
|
|
AverageOverDaysInFrequency, !- Calculation Method
|
|
30, !- Calculation Frequency
|
|
15000; !- Maximum Figures in Shadow Overlap Calculations
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SURFACECONVECTIONALGORITHM:INSIDE ===========
|
|
|
|
SurfaceConvectionAlgorithm:Inside,TARP;
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SURFACECONVECTIONALGORITHM:OUTSIDE ===========
|
|
|
|
SurfaceConvectionAlgorithm:Outside,TARP;
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: HEATBALANCEALGORITHM ===========
|
|
|
|
HeatBalanceAlgorithm,ConductionTransferFunction,200.0000;
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: TIMESTEP ===========
|
|
|
|
Timestep,6;
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CONVERGENCELIMITS ===========
|
|
|
|
ConvergenceLimits,
|
|
1, !- Minimum System Timestep {minutes}
|
|
20; !- Maximum HVAC Iterations
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: RUNPERIOD ===========
|
|
|
|
RunPeriod,
|
|
, !- Name
|
|
1, !- Begin Month
|
|
1, !- Begin Day of Month
|
|
, !- Begin Year
|
|
12, !- End Month
|
|
31, !- End Day of Month
|
|
, !- End Year
|
|
Sunday, !- Day of Week for Start Day
|
|
No, !- Use Weather File Holidays and Special Days
|
|
No, !- Use Weather File Daylight Saving Period
|
|
No, !- Apply Weekend Holiday Rule
|
|
Yes, !- Use Weather File Rain Indicators
|
|
Yes; !- Use Weather File Snow Indicators
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: RUNPERIODCONTROL:SPECIALDAYS ===========
|
|
|
|
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
New Years Day, !- Name
|
|
January 1, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Veterans Day, !- Name
|
|
November 11, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Christmas, !- Name
|
|
December 25, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Independence Day, !- Name
|
|
July 4, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
MLK Day, !- Name
|
|
3rd Monday in January, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Presidents Day, !- Name
|
|
3rd Monday in February, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Memorial Day, !- Name
|
|
Last Monday in May, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Labor Day, !- Name
|
|
1st Monday in September, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Columbus Day, !- Name
|
|
2nd Monday in October, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Thanksgiving, !- Name
|
|
4th Thursday in November,!- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: RUNPERIODCONTROL:DAYLIGHTSAVINGTIME ===========
|
|
|
|
|
|
|
|
RunPeriodControl:DaylightSavingTime,
|
|
2nd Sunday in March, !- Start Date
|
|
1st Sunday in November; !- End Date
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: LOCATION ===========
|
|
! Site:Location and design-day objects created by:
|
|
! ../../_p.bin/ddy2idf /projects/bigsim/weather/EnergyPlus/tmy3.new/all/USA_MN_Rochester.Intl.AP.726440_TMY3.ddy
|
|
!
|
|
Site:Location,
|
|
Rochester International Arpt_MN_USA Design_Conditions, !- Site:Location Name
|
|
43.90, !- Latitude {N+ S-}
|
|
-92.50, !- Longitude {W- E+}
|
|
-6.00, !- Time Zone Relative to GMT {GMT+/-}
|
|
398.00; !- Elevation {m}
|
|
|
|
SizingPeriod:DesignDay,
|
|
Rochester International Arpt Ann Htg 99.6% Condns DB, !- Name
|
|
1, !- Month
|
|
21, !- Day of Month
|
|
WinterDesignDay,!- Day Type
|
|
-26.2, !- Maximum Dry-Bulb Temperature {C}
|
|
0.0, !- Daily Dry-Bulb Temperature Range {C}
|
|
DefaultMultipliers, !- Dry-Bulb Temperature Range Modifier Type
|
|
, !- Dry-Bulb Temperature Range Modifier Schedule Name
|
|
Wetbulb, !- Humidity Condition Type
|
|
-26.2, !- Wetbulb at Maximum Dry-Bulb {C}
|
|
, !- Humidity Indicating Day Schedule Name
|
|
, !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir}
|
|
, !- Enthalpy at Maximum Dry-Bulb {J/kg}
|
|
, !- Daily WetBulb Temperature Range {deltaC}
|
|
96634., !- Barometric Pressure {Pa}
|
|
5.7, !- Wind Speed {m/s} design conditions vs. traditional 6.71 m/s (15 mph)
|
|
310, !- Wind Direction {Degrees; N=0, S=180}
|
|
No, !- Rain {Yes/No}
|
|
No, !- Snow on ground {Yes/No}
|
|
No, !- Daylight Savings Time Indicator
|
|
ASHRAEClearSky, !- Solar Model Indicator
|
|
, !- Beam Solar Day Schedule Name
|
|
, !- Diffuse Solar Day Schedule Name
|
|
, !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub)
|
|
, !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud)
|
|
0.00; !- Clearness {0.0 to 1.1}
|
|
|
|
SizingPeriod:DesignDay,
|
|
Rochester International Arpt Ann Clg .4% Condns DB=>MWB, !- Name
|
|
7, !- Month
|
|
21, !- Day of Month
|
|
SummerDesignDay,!- Day Type
|
|
31.2, !- Maximum Dry-Bulb Temperature {C}
|
|
10.6, !- Daily Dry-Bulb Temperature Range {C}
|
|
DefaultMultipliers, !- Dry-Bulb Temperature Range Modifier Type
|
|
, !- Dry-Bulb Temperature Range Modifier Schedule Name
|
|
Wetbulb, !- Humidity Condition Type
|
|
23.1, !- Wetbulb at Maximum Dry-Bulb {C}
|
|
, !- Humidity Indicating Day Schedule Name
|
|
, !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir}
|
|
, !- Enthalpy at Maximum Dry-Bulb {J/kg}
|
|
, !- Daily WetBulb Temperature Range {deltaC}
|
|
96634., !- Barometric Pressure {Pa}
|
|
6.7, !- Wind Speed {m/s} design conditions vs. traditional 3.35 m/s (7mph)
|
|
200, !- Wind Direction {Degrees; N=0, S=180}
|
|
No, !- Rain {Yes/No}
|
|
No, !- Snow on ground {Yes/No}
|
|
No, !- Daylight Savings Time Indicator
|
|
ASHRAETau, !- Solar Model Indicator
|
|
, !- Beam Solar Day Schedule Name
|
|
, !- Diffuse Solar Day Schedule Name
|
|
0.404, !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub)
|
|
2.226; !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud)
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SITE:WATERMAINSTEMPERATURE ===========
|
|
|
|
|
|
Site:WaterMainsTemperature,
|
|
CORRELATION, !- Calculation Method
|
|
, !- Temperature Schedule Name
|
|
6.375, !- Annual average outdoor air temperature {C}
|
|
33.5; !- Maximum difference in monthly average outdoor air temperatures {C}
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: Site:GroundTemperature:FCfactorMethod ===========
|
|
|
|
Site:GroundTemperature:FCfactorMethod,
|
|
7.4, !- January Ground Temperature {C}
|
|
-0.0, !- February Ground Temperature {C}
|
|
-7.6, !- March Ground Temperature {C}
|
|
-12.6, !- April Ground Temperature {C}
|
|
-7.7, !- May Ground Temperature {C}
|
|
0.3, !- June Ground Temperature {C}
|
|
7.0, !- July Ground Temperature {C}
|
|
14.2, !- August Ground Temperature {C}
|
|
19.2, !- September Ground Temperature {C}
|
|
20.9, !- October Ground Temperature {C}
|
|
20.0, !- November Ground Temperature {C}
|
|
15.4; !- December Ground Temperature {C}
|
|
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: MATERIAL:REGULAR-R ===========
|
|
|
|
Material:NoMass,
|
|
Opaque Door panel_con, !- Name
|
|
MediumRough, !- Roughness
|
|
0.475963827, !- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
Overhead Door_con Panel, !- Name
|
|
MediumRough, !- Roughness
|
|
0.567741935, !- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CONSTRUCTION ===========
|
|
|
|
Construction,
|
|
Swinging Door_con, !- Name
|
|
Opaque Door panel_con; !- Outside Layer
|
|
|
|
Construction,
|
|
Overhead Door_con, !- Name
|
|
Overhead Door_con Panel; !- Outside Layer
|
|
|
|
|
|
|
|
!
|
|
!- =========== ALL OBJECTS IN CLASS: MATERIAL:REGULAR ===========
|
|
|
|
Material,
|
|
Std Wood 6inch, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.15, !- Thickness {m}
|
|
0.12, !- Conductivity {W/m-K}
|
|
540.0000, !- Density {kg/m3}
|
|
1210, !- Specific Heat {J/kg-K}
|
|
0.9000000, !- Thermal Absorptance
|
|
0.7000000, !- Solar Absorptance
|
|
0.7000000; !- Visible Absorptance
|
|
|
|
Material,
|
|
AC02 Acoustic Ceiling, !- Name
|
|
MediumSmooth, !- Roughness
|
|
1.2700000E-02, !- Thickness {m}
|
|
5.7000000E-02, !- Conductivity {W/m-K}
|
|
288.0000, !- Density {kg/m3}
|
|
1339.000, !- Specific Heat {J/kg-K}
|
|
0.9000000, !- Thermal Absorptance
|
|
0.7000000, !- Solar Absorptance
|
|
0.2000000; !- Visible Absorptance
|
|
|
|
Material,
|
|
F07 25mm stucco, !- Name
|
|
Smooth, !- Roughness
|
|
0.0254, !- Thickness {m}
|
|
0.72, !- Conductivity {W/m-K}
|
|
1856, !- Density {kg/m3}
|
|
840, !- Specific Heat {J/kg-K}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
Material,
|
|
F08 Metal surface, !- Name
|
|
Smooth, !- Roughness
|
|
0.0008, !- Thickness {m}
|
|
45.28, !- Conductivity {W/m-K}
|
|
7824, !- Density {kg/m3}
|
|
500; !- Specific Heat {J/kg-K}
|
|
|
|
Material,
|
|
F08 Metal roof surface, !- Name
|
|
Smooth, !- Roughness
|
|
0.0008, !- Thickness {m}
|
|
45.28, !- Conductivity {W/m-K}
|
|
7824, !- Density {kg/m3}
|
|
500, !- Specific Heat {J/kg-K}
|
|
0.9, !- Absorptance:Thermal
|
|
0.77; !- Absorptance:Solar
|
|
|
|
Material,
|
|
F12 Asphalt shingles, !- Name
|
|
VeryRough, !- Roughness
|
|
0.0032, !- Thickness {m}
|
|
0.04, !- Conductivity {W/m-K}
|
|
1120, !- Density {kg/m3}
|
|
1260, !- Specific Heat {J/kg-K}
|
|
0.9, !- Absorptance:Thermal
|
|
0.77; !- Absorptance:Solar
|
|
|
|
Material,
|
|
F13 Built-up roofing, !- Name
|
|
Rough, !- Roughness
|
|
0.0095, !- Thickness {m}
|
|
0.16, !- Conductivity {W/m-K}
|
|
1120, !- Density {kg/m3}
|
|
1460, !- Specific Heat {J/kg-K}
|
|
0.9, !- Absorptance:Thermal
|
|
0.77; !- Absorptance:Solar
|
|
|
|
Material,
|
|
G01 13mm gypsum board, !- Name
|
|
Smooth, !- Roughness
|
|
0.0127, !- Thickness {m}
|
|
0.1600, !- Conductivity {W/m-K}
|
|
800.0000, !- Density {kg/m3}
|
|
1090.0000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Absorptance:Thermal
|
|
0.7000, !- Absorptance:Solar
|
|
0.5000; !- Absorptance:Visible
|
|
|
|
Material,
|
|
G01 16mm gypsum board, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0159, !- Thickness {m}
|
|
0.16, !- Conductivity {W/m-K}
|
|
800, !- Density {kg/m3}
|
|
1090; !- Specific Heat {J/kg-K}
|
|
|
|
Material,
|
|
G02 16mm plywood, !- Name
|
|
Smooth, !- Roughness
|
|
0.0159, !- Thickness {m}
|
|
0.12, !- Conductivity {W/m-K}
|
|
544, !- Density {kg/m3}
|
|
1210; !- Specific Heat {J/kg-K}
|
|
|
|
Material,
|
|
M14 150mm heavyweight concrete roof, !- Name
|
|
MediumRough, !- Roughness
|
|
0.1524, !- Thickness {m}
|
|
2.31, !- Conductivity {W/m-K}
|
|
2322, !- Density {kg/m3}
|
|
832; !- Specific Heat {J/kg-K}
|
|
|
|
|
|
Material,
|
|
100mm Normalweight concrete wall, !- Name - based on 90.1-2004 Appendix-Table A3-1B
|
|
MediumRough, !- Roughness
|
|
0.1016, !- Thickness {m}
|
|
2.31, !- Conductivity {W/m-K}
|
|
2322, !- Density {kg/m3}
|
|
832; !- Specific Heat {J/kg-K}
|
|
|
|
|
|
Material,
|
|
200mm Normalweight concrete wall, !- Name - based on 90.1-2004 Appendix-Table A3-1B
|
|
MediumRough, !- Roughness
|
|
0.2032, !- Thickness {m}
|
|
2.31, !- Conductivity {W/m-K}
|
|
2322, !- Density {kg/m3}
|
|
832; !- Specific Heat {J/kg-K}
|
|
|
|
Material,
|
|
100mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B
|
|
MediumRough, !- Roughness
|
|
0.1016, !- Thickness {m}
|
|
2.31, !- Conductivity {W/m-K}
|
|
2322, !- Density {kg/m3}
|
|
832; !- Specific Heat {J/kg-K}
|
|
|
|
Material,
|
|
150mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B
|
|
MediumRough, !- Roughness
|
|
0.1524, !- Thickness {m}
|
|
2.31, !- Conductivity {W/m-K}
|
|
2322, !- Density {kg/m3}
|
|
832; !- Specific Heat {J/kg-K}
|
|
|
|
Material,
|
|
200mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B
|
|
MediumRough, !- Roughness
|
|
0.2032, !- Thickness {m}
|
|
2.31, !- Conductivity {W/m-K}
|
|
2322, !- Density {kg/m3}
|
|
832; !- Specific Heat {J/kg-K}
|
|
|
|
Material,
|
|
M10 200mm concrete block wall, !- Name
|
|
MediumRough, !- Roughness
|
|
0.2032, !- Thickness {m}
|
|
0.72, !- Conductivity {W/m-K}
|
|
800, !- Density {kg/m3}
|
|
832; !- Specific Heat {J/kg-K}
|
|
|
|
Material,
|
|
M10 200mm concrete block basement wall, !- Name
|
|
MediumRough, !- Roughness
|
|
0.2032, !- Thickness {m}
|
|
1.326, !- Conductivity {W/m-K}
|
|
1842, !- Density {kg/m3}
|
|
912; !- Specific Heat {J/kg-K}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Material:NoMass,
|
|
CP02 CARPET PAD, !- Name
|
|
VeryRough, !- Roughness
|
|
0.21648, !- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.8; !- Visible Absorptance
|
|
|
|
|
|
Material:NoMass,
|
|
Air_Wall_Material, !- Name
|
|
Rough, !- Roughness
|
|
0.2079491, !- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7; !- Solar Absorptance
|
|
|
|
|
|
Material:NoMass,
|
|
Nonres_Roof_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
5.30668495131472,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Absorptance:Thermal
|
|
0.7, !- Absorptance:Solar
|
|
0.7; !- Absorptance:Visible
|
|
|
|
Material:NoMass,
|
|
Res_Roof_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0299387330245182,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
Semiheated_Roof_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0299387330245182,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
|
|
|
|
Material:NoMass,
|
|
Nonres_Exterior_Wall_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
1.88434339518544,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
Res_Exterior_Wall_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0299387330245182,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
Semiheated_Exterior_Wall_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0299387330245182,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
|
|
|
|
Material:NoMass,
|
|
Nonres_Floor_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
|
|
0.0299387330245182,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
Res_Floor_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
|
|
0.0299387330245182,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
Semiheated_Floor_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
|
|
0.0299387330245182,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Material:NoMass,
|
|
Std Opaque Door Panel, !- Name
|
|
MediumRough, !- Roughness
|
|
0.123456790123457, !- (corresponds to default RSI-0.12327 or R-0.7) Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CONSTRUCTION ===========
|
|
|
|
Construction,
|
|
InteriorFurnishings, !- Name
|
|
Std Wood 6inch; !- Outside Layer
|
|
|
|
Construction,
|
|
Air_Wall, !- Name
|
|
Air_Wall_Material; !- Outside Layer
|
|
|
|
Construction,
|
|
DropCeiling, !- Name
|
|
AC02 Acoustic Ceiling; !- Outside Layer
|
|
|
|
Construction,
|
|
OpaqueDoor, !- Name
|
|
Std Opaque Door Panel; !- Outside Layer
|
|
|
|
Construction,
|
|
AtticRoofDeck, !- Name
|
|
F12 Asphalt shingles, !- Outside Layer
|
|
G02 16mm plywood; !- Layer 2
|
|
|
|
Construction,
|
|
int_wall, !- Name
|
|
G01 13mm gypsum board, !- Outside Layer
|
|
G01 13mm gypsum board; !- Layer 2
|
|
|
|
Construction,
|
|
ext_slab_8in_with_carpet,!- Name
|
|
200mm Normalweight concrete floor, !- Outside Layer
|
|
CP02 CARPET PAD; !- Layer 2
|
|
|
|
Construction,
|
|
ext_slab_8in, !- Name
|
|
200mm Normalweight concrete floor; !- Outside Layer
|
|
|
|
Construction,
|
|
ext_slab_6in_with_carpet,!- Name
|
|
150mm Normalweight concrete floor, !- Outside Layer
|
|
CP02 CARPET PAD; !- Layer 2
|
|
|
|
Construction,
|
|
ext_slab_6in, !- Name
|
|
150mm Normalweight concrete floor; !- Outside Layer
|
|
|
|
Construction,
|
|
int_slab_floor, !- Name
|
|
100mm Normalweight concrete floor, !- Outside Layer
|
|
CP02 CARPET PAD; !- Layer 2
|
|
|
|
Construction,
|
|
int_slab_ceiling, !- Name
|
|
CP02 CARPET PAD, !- Outside Layer
|
|
100mm Normalweight concrete floor; !- Layer 2
|
|
|
|
Construction,
|
|
basement_wall, !- Name
|
|
M10 200mm concrete block basement wall; !- Outside Layer
|
|
|
|
Construction,
|
|
int_wood_floor, !- Name
|
|
AC02 Acoustic Ceiling, !- Outside Layer
|
|
G02 16mm plywood, !- Layer 2
|
|
CP02 CARPET PAD; !- Layer 3
|
|
|
|
Construction,
|
|
ext_soffit_floor, !- Name
|
|
G02 16mm plywood; !- Outside Layer
|
|
|
|
Construction,
|
|
nonres_roof, !- Name
|
|
F13 Built-up roofing, !- Outside Layer
|
|
Nonres_Roof_Insulation, !- Layer #2
|
|
F08 Metal surface; !- Layer #3
|
|
|
|
|
|
Construction,
|
|
res_roof, !- Name
|
|
F13 Built-up roofing, !- Outside Layer
|
|
Res_Roof_Insulation, !- Layer #2
|
|
F08 Metal surface; !- Layer #3
|
|
|
|
|
|
Construction,
|
|
semiheated_roof, !- Name
|
|
F13 Built-up roofing, !- Outside Layer
|
|
Semiheated_Roof_Insulation, !- Layer #2
|
|
F08 Metal surface; !- Layer #3
|
|
|
|
|
|
|
|
|
|
Construction,
|
|
nonres_ext_wall, !- Name
|
|
200mm Normalweight concrete wall, !- Outside Layer
|
|
Nonres_Exterior_Wall_Insulation, !- Layer #2
|
|
G01 13mm gypsum board; !- Layer #3
|
|
|
|
|
|
Construction,
|
|
res_ext_wall, !- Name
|
|
200mm Normalweight concrete wall, !- Outside Layer
|
|
Res_Exterior_Wall_Insulation, !- Layer #2
|
|
G01 13mm gypsum board; !- Layer #3
|
|
|
|
|
|
Construction,
|
|
semiheated_ext_wall, !- Name
|
|
200mm Normalweight concrete wall, !- Outside Layer
|
|
Semiheated_Exterior_Wall_Insulation, !- Layer #2
|
|
G01 13mm gypsum board; !- Layer #3
|
|
|
|
|
|
Construction,
|
|
nonres_floor, !- Name
|
|
Nonres_Floor_Insulation, !- Outside Layer
|
|
100mm Normalweight concrete floor, !- Layer #1
|
|
CP02 CARPET PAD; !- Layer #2
|
|
|
|
|
|
Construction,
|
|
res_floor, !- Name
|
|
Res_Floor_Insulation, !- Outside Layer
|
|
100mm Normalweight concrete floor, !- Layer #1
|
|
CP02 CARPET PAD; !- Layer #2
|
|
|
|
|
|
Construction,
|
|
semiheated_floor, !- Name
|
|
Semiheated_Floor_Insulation, !- Outside Layer
|
|
100mm Normalweight concrete floor, !- Layer #1
|
|
CP02 CARPET PAD; !- Layer #2
|
|
|
|
|
|
Construction,
|
|
nonres_floor_ceiling, !- Name - reverse ordered layers for nonres_floor
|
|
CP02 CARPET PAD, !- Outside Layer
|
|
100mm Normalweight concrete floor, !- Layer #1
|
|
Nonres_Floor_Insulation; !- Layer #2
|
|
|
|
Construction,
|
|
res_floor_ceiling, !- Name - reverse ordered layers for res_floor
|
|
CP02 CARPET PAD, !- Outside Layer
|
|
100mm Normalweight concrete floor, !- Layer #1
|
|
Res_Floor_Insulation; !- Layer #2
|
|
|
|
Construction,
|
|
semiheated_floor_ceiling, !- Name - reverse ordered layers for semiheated_floor
|
|
CP02 CARPET PAD, !- Outside Layer
|
|
100mm Normalweight concrete floor, !- Layer #1
|
|
Semiheated_Floor_Insulation; !- Layer #2
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: WINDOWMATERIAL:SIMPLEGLAZINGSYSTEM ===========
|
|
|
|
WindowMaterial:SimpleGlazingSystem,
|
|
Nonres Window Glazing Layer, !- Name
|
|
1.9306084, !- U-Factor {W/m2-K}
|
|
0.38, !- Solar Heat Gain Coefficient
|
|
0.418; !- Visible Transmittance
|
|
|
|
WindowMaterial:SimpleGlazingSystem,
|
|
Nonres Skylight Glazing Layer, !- Name
|
|
2.6687822, !- U-Factor {W/m2-K}
|
|
0.4, !- Solar Heat Gain Coefficient
|
|
0.4; !- Visible Transmittance
|
|
|
|
Construction,
|
|
NonresWindow_U_0.34_SHGC_0.38, !- Name
|
|
Nonres Window Glazing Layer; !- Outside Layer
|
|
|
|
Construction,
|
|
NonresSkylight_U_0.47_SHGC_0.4, !- Name
|
|
Nonres Skylight Glazing Layer; !- Outside Layer
|
|
|
|
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SCHEDULETYPELIMITS ===========
|
|
|
|
|
|
ScheduleTypeLimits,
|
|
Any Number; !- Name
|
|
|
|
|
|
Schedule:Compact,
|
|
FrontEntry_CoilSched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00, !- Field 3
|
|
1.0; !- Field 4
|
|
Schedule:Compact,
|
|
FrontEntry_FanSched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00, !- Field 3
|
|
1.0; !- Field 4
|
|
|
|
ScheduleTypeLimits,
|
|
Fraction, !- Name
|
|
0.0, !- Lower Limit Value
|
|
1.0, !- Upper Limit Value
|
|
CONTINUOUS; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Temperature, !- Name
|
|
-60, !- Lower Limit Value
|
|
200, !- Upper Limit Value
|
|
CONTINUOUS; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
On/Off, !- Name
|
|
0, !- Lower Limit Value
|
|
1, !- Upper Limit Value
|
|
DISCRETE; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Control Type, !- Name
|
|
0, !- Lower Limit Value
|
|
4, !- Upper Limit Value
|
|
DISCRETE; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Humidity, !- Name
|
|
10, !- Lower Limit Value
|
|
90, !- Upper Limit Value
|
|
CONTINUOUS; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Number; !- Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SCHEDULE:COMPACT ===========
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
BLDG_LIGHT_BACK_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 7:00,0.05, !- Field 3
|
|
Until: 8:00,0.156409254, !- Field 4
|
|
Until: 9:00,0.312818508, !- Field 5
|
|
Until: 18:00,0.703841643, !- Field 6
|
|
Until: 21:00,0.391023135, !- Field 7
|
|
Until: 22:00,0.2, !- Field 8
|
|
Until: 24:00,0.05, !- Field 9
|
|
For: Saturday, !- Field 10
|
|
Until: 7:00,0.05, !- Field 11
|
|
Until: 8:00,0.078204627, !- Field 12
|
|
Until: 9:00,0.234613881, !- Field 13
|
|
Until: 10:00,0.469227762, !- Field 14
|
|
Until: 18:00,0.703841643, !- Field 15
|
|
Until: 19:00,0.391023135, !- Field 16
|
|
Until: 21:00,0.234613881, !- Field 17
|
|
Until: 22:00,0.078204627, !- Field 18
|
|
Until: 24:00,0.05, !- Field 19
|
|
For: SummerDesignDay, !- Field 20
|
|
Until: 24:00,1, !- Field 21
|
|
For: WinterDesignDay, !- Field 22
|
|
Until: 24:00,0, !- Field 23
|
|
For: Sunday Holidays AllOtherDays, !- Field 24
|
|
Until: 9:00,0.05, !- Field 25
|
|
Until: 10:00,0.078204627, !- Field 26
|
|
Until: 12:00,0.312818508, !- Field 27
|
|
Until: 17:00,0.469227762, !- Field 28
|
|
Until: 18:00,0.312818508, !- Field 29
|
|
Until: 19:00,0.156409254, !- Field 30
|
|
Until: 24:00,0.05; !- Field 31
|
|
|
|
Schedule:Compact,
|
|
BLDG_LIGHT_CORE_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 7:00,0.05, !- Field 3
|
|
Until: 8:00,0.2, !- Field 4
|
|
Until: 9:00,0.4, !- Field 5
|
|
Until: 18:00,0.9, !- Field 6
|
|
Until: 21:00,0.5, !- Field 7
|
|
Until: 22:00,0.2, !- Field 8
|
|
Until: 24:00,0.05, !- Field 9
|
|
For: Saturday, !- Field 10
|
|
Until: 7:00,0.05, !- Field 11
|
|
Until: 8:00,0.1, !- Field 12
|
|
Until: 9:00,0.3, !- Field 13
|
|
Until: 10:00,0.6, !- Field 14
|
|
Until: 18:00,0.9, !- Field 15
|
|
Until: 19:00,0.5, !- Field 16
|
|
Until: 21:00,0.3, !- Field 17
|
|
Until: 22:00,0.1, !- Field 18
|
|
Until: 24:00,0.05, !- Field 19
|
|
For: SummerDesignDay, !- Field 20
|
|
Until: 24:00,1, !- Field 21
|
|
For: WinterDesignDay, !- Field 22
|
|
Until: 24:00,0, !- Field 23
|
|
For: Sunday Holidays AllOtherDays, !- Field 24
|
|
Until: 9:00,0.05, !- Field 25
|
|
Until: 10:00,0.1, !- Field 26
|
|
Until: 12:00,0.4, !- Field 27
|
|
Until: 17:00,0.6, !- Field 28
|
|
Until: 18:00,0.4, !- Field 29
|
|
Until: 19:00,0.2, !- Field 30
|
|
Until: 24:00,0.05; !- Field 31
|
|
Schedule:Compact,
|
|
BLDG_LIGHT_ENTRY_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 7:00,0.05, !- Field 3
|
|
Until: 8:00,0.164, !- Field 4
|
|
Until: 9:00,0.328, !- Field 5
|
|
Until: 18:00,0.738, !- Field 6
|
|
Until: 21:00,0.41, !- Field 7
|
|
Until: 22:00,0.2, !- Field 8
|
|
Until: 24:00,0.05, !- Field 9
|
|
For: Saturday, !- Field 10
|
|
Until: 7:00,0.05, !- Field 11
|
|
Until: 8:00,0.082, !- Field 12
|
|
Until: 9:00,0.246, !- Field 13
|
|
Until: 10:00,0.492, !- Field 14
|
|
Until: 18:00,0.738, !- Field 15
|
|
Until: 19:00,0.41, !- Field 16
|
|
Until: 21:00,0.246, !- Field 17
|
|
Until: 22:00,0.082, !- Field 18
|
|
Until: 24:00,0.05, !- Field 19
|
|
For: SummerDesignDay, !- Field 20
|
|
Until: 24:00,1, !- Field 21
|
|
For: WinterDesignDay, !- Field 22
|
|
Until: 24:00,0, !- Field 23
|
|
For: Sunday Holidays AllOtherDays, !- Field 24
|
|
Until: 9:00,0.05, !- Field 25
|
|
Until: 10:00,0.082, !- Field 26
|
|
Until: 12:00,0.328, !- Field 27
|
|
Until: 17:00,0.492, !- Field 28
|
|
Until: 18:00,0.328, !- Field 29
|
|
Until: 19:00,0.164, !- Field 30
|
|
Until: 24:00,0.05; !- Field 31
|
|
|
|
Schedule:Compact,
|
|
BLDG_LIGHT_FRONT_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 7:00,0.05, !- Field 3
|
|
Until: 8:00,0.19364, !- Field 4
|
|
Until: 9:00,0.38728, !- Field 5
|
|
Until: 18:00,0.87138, !- Field 6
|
|
Until: 21:00,0.4841, !- Field 7
|
|
Until: 22:00,0.2, !- Field 8
|
|
Until: 24:00,0.05, !- Field 9
|
|
For: Saturday, !- Field 10
|
|
Until: 7:00,0.05, !- Field 11
|
|
Until: 8:00,0.09682, !- Field 12
|
|
Until: 9:00,0.29046, !- Field 13
|
|
Until: 10:00,0.58092, !- Field 14
|
|
Until: 18:00,0.87138, !- Field 15
|
|
Until: 19:00,0.4841, !- Field 16
|
|
Until: 21:00,0.29046, !- Field 17
|
|
Until: 22:00,0.09682, !- Field 18
|
|
Until: 24:00,0.05, !- Field 19
|
|
For: SummerDesignDay, !- Field 20
|
|
Until: 24:00,1, !- Field 21
|
|
For: WinterDesignDay, !- Field 22
|
|
Until: 24:00,0, !- Field 23
|
|
For: Sunday Holidays AllOtherDays, !- Field 24
|
|
Until: 9:00,0.05, !- Field 25
|
|
Until: 10:00,0.09682, !- Field 26
|
|
Until: 12:00,0.38728, !- Field 27
|
|
Until: 17:00,0.58092, !- Field 28
|
|
Until: 18:00,0.38728, !- Field 29
|
|
Until: 19:00,0.19364, !- Field 30
|
|
Until: 24:00,0.05; !- Field 31
|
|
|
|
Schedule:Compact,
|
|
BLDG_LIGHT_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 7:00,0.05, !- Field 3
|
|
Until: 8:00,0.2, !- Field 4
|
|
Until: 9:00,0.4, !- Field 5
|
|
Until: 18:00,0.9, !- Field 6
|
|
Until: 21:00,0.5, !- Field 7
|
|
Until: 22:00,0.2, !- Field 8
|
|
Until: 24:00,0.05, !- Field 9
|
|
For: Saturday, !- Field 10
|
|
Until: 7:00,0.05, !- Field 11
|
|
Until: 8:00,0.1, !- Field 12
|
|
Until: 9:00,0.3, !- Field 13
|
|
Until: 10:00,0.6, !- Field 14
|
|
Until: 18:00,0.9, !- Field 15
|
|
Until: 19:00,0.5, !- Field 16
|
|
Until: 21:00,0.3, !- Field 17
|
|
Until: 22:00,0.1, !- Field 18
|
|
Until: 24:00,0.05, !- Field 19
|
|
For: SummerDesignDay, !- Field 20
|
|
Until: 24:00,1, !- Field 21
|
|
For: WinterDesignDay, !- Field 22
|
|
Until: 24:00,0, !- Field 23
|
|
For: Sunday Holidays AllOtherDays, !- Field 24
|
|
Until: 9:00,0.05, !- Field 25
|
|
Until: 10:00,0.1, !- Field 26
|
|
Until: 12:00,0.4, !- Field 27
|
|
Until: 17:00,0.6, !- Field 28
|
|
Until: 18:00,0.4, !- Field 29
|
|
Until: 19:00,0.2, !- Field 30
|
|
Until: 24:00,0.05; !- Field 31
|
|
|
|
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
BLDG_OCC_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 07:00,0.0, !- Field 3
|
|
Until: 08:00,0.1, !- Field 5
|
|
Until: 09:00,0.2, !- Field 7
|
|
Until: 11:00,0.5, !- Field 9
|
|
Until: 15:00,0.7, !- Field 11
|
|
Until: 16:00,0.8, !- Field 13
|
|
Until: 17:00,0.7, !- Field 15
|
|
Until: 19:00,0.5, !- Field 17
|
|
Until: 21:00,0.3, !- Field 19
|
|
Until: 24:00,0.0, !- Field 21
|
|
For: SummerDesignDay, !- Field 23
|
|
Until: 24:00,1.0, !- Field 24
|
|
For: Saturday, !- Field 26
|
|
Until: 07:00,0.0, !- Field 27
|
|
Until: 08:00,0.1, !- Field 29
|
|
Until: 09:00,0.2, !- Field 31
|
|
Until: 10:00,0.5, !- Field 33
|
|
Until: 11:00,0.6, !- Field 35
|
|
Until: 17:00,0.8, !- Field 37
|
|
Until: 18:00,0.6, !- Field 39
|
|
Until: 21:00,0.2, !- Field 41
|
|
Until: 22:00,0.1, !- Field 43
|
|
Until: 24:00,0.0, !- Field 45
|
|
For: WinterDesignDay, !- Field 47
|
|
Until: 24:00,0.0, !- Field 48
|
|
For: Sunday Holidays AllOtherDays, !- Field 50
|
|
Until: 09:00,0.0, !- Field 51
|
|
Until: 10:00,0.1, !- Field 53
|
|
Until: 12:00,0.2, !- Field 55
|
|
Until: 17:00,0.4, !- Field 57
|
|
Until: 18:00,0.2, !- Field 59
|
|
Until: 19:00,0.1, !- Field 61
|
|
Until: 24:00,0.0; !- Field 63
|
|
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
BLDG_EQUIP_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 07:00,0.1973725624, !- Field 3
|
|
Until: 08:00,0.3988803288, !- Field 5
|
|
Until: 09:00,0.5983204932, !- Field 7
|
|
Until: 19:00,0.8974807398, !- Field 9
|
|
Until: 20:00,0.6980405754, !- Field 11
|
|
Until: 21:00,0.6980405754, !- Field 13
|
|
Until: 22:00,0.1973725624, !- Field 15
|
|
Until: 24:00,0.1973725624, !- Field 17
|
|
For: Saturday, !- Field 19
|
|
Until: 07:00,0.1480294218, !- Field 20
|
|
Until: 08:00,0.2991602466, !- Field 22
|
|
Until: 09:00,0.498600411, !- Field 24
|
|
Until: 10:00,0.7977606576, !- Field 26
|
|
Until: 18:00,0.8974807398, !- Field 28
|
|
Until: 19:00,0.6980405754, !- Field 30
|
|
Until: 21:00,0.498600411, !- Field 32
|
|
Until: 22:00,0.2991602466, !- Field 34
|
|
Until: 24:00,0.1480294218, !- Field 36
|
|
For: SummerDesignDay, !- Field 38
|
|
Until: 24:00,1.0, !- Field 39
|
|
For: WinterDesignDay, !- Field 41
|
|
Until: 24:00,0.0, !- Field 42
|
|
For: Sunday Holidays AllOtherDays, !- Field 44
|
|
Until: 09:00,0.1480294218, !- Field 45
|
|
Until: 10:00,0.2991602466, !- Field 47
|
|
Until: 12:00,0.5983204932, !- Field 49
|
|
Until: 17:00,0.7977606576, !- Field 51
|
|
Until: 18:00,0.5983204932, !- Field 53
|
|
Until: 19:00,0.3988803288, !- Field 55
|
|
Until: 24:00,0.1480294218; !- Field 57
|
|
|
|
Schedule:Compact,
|
|
BLDG_ELEVATORS, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 07:00,0.0, !- Field 3
|
|
Until: 08:00,0.12, !- Field 5
|
|
Until: 09:00,0.22, !- Field 7
|
|
Until: 10:00,0.64, !- Field 9
|
|
Until: 11:00,0.74, !- Field 11
|
|
Until: 12:00,0.68, !- Field 13
|
|
Until: 13:00,0.68, !- Field 15
|
|
Until: 14:00,0.71, !- Field 17
|
|
Until: 15:00,0.72, !- Field 19
|
|
Until: 16:00,0.72, !- Field 21
|
|
Until: 17:00,0.73, !- Field 23
|
|
Until: 18:00,0.68, !- Field 25
|
|
Until: 19:00,0.68, !- Field 27
|
|
Until: 20:00,0.58, !- Field 29
|
|
Until: 21:00,0.54, !- Field 31
|
|
Until: 22:00,0.00, !- Field 33
|
|
Until: 24:00,0.00, !- Field 35
|
|
For: Saturday WinterDesignDay, !- Field 37
|
|
Until: 07:00,0.0, !- Field 38
|
|
Until: 08:00,0.09, !- Field 40
|
|
Until: 09:00,0.21, !- Field 42
|
|
Until: 10:00,0.56, !- Field 44
|
|
Until: 11:00,0.66, !- Field 46
|
|
Until: 12:00,0.68, !- Field 48
|
|
Until: 13:00,0.68, !- Field 50
|
|
Until: 14:00,0.69, !- Field 52
|
|
Until: 15:00,0.70, !- Field 54
|
|
Until: 16:00,0.69, !- Field 56
|
|
Until: 17:00,0.66, !- Field 58
|
|
Until: 18:00,0.58, !- Field 60
|
|
Until: 19:00,0.47, !- Field 62
|
|
Until: 20:00,0.43, !- Field 64
|
|
Until: 21:00,0.43, !- Field 66
|
|
Until: 22:00,0.08, !- Field 68
|
|
Until: 24:00,0.00, !- Field 70
|
|
For: Sunday Holidays AllOtherDays, !- Field 72
|
|
Until: 09:00,0.00, !- Field 73
|
|
Until: 10:00,0.11, !- Field 75
|
|
Until: 11:00,0.13, !- Field 77
|
|
Until: 12:00,0.35, !- Field 79
|
|
Until: 13:00,0.37, !- Field 81
|
|
Until: 14:00,0.37, !- Field 83
|
|
Until: 15:00,0.39, !- Field 85
|
|
Until: 16:00,0.41, !- Field 87
|
|
Until: 17:00,0.38, !- Field 89
|
|
Until: 18:00,0.34, !- Field 91
|
|
Until: 19:00,0.03, !- Field 93
|
|
Until: 24:00,0.00; !- Field 95
|
|
|
|
Schedule:Compact,
|
|
INFIL_SCH, !- Name
|
|
fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 06:00,1.0, !- Field 3
|
|
Until: 21:00,0.0, !- Field 5
|
|
Until: 24:00,1.0, !- Field 7
|
|
For: Saturday, !- Field 9
|
|
Until: 06:00,1.0, !- Field 10
|
|
Until: 22:00,0.0, !- Field 12
|
|
Until: 24:00,1.0, !- Field 14
|
|
For: WinterDesignDay, !- Field 16
|
|
Until: 24:00,1.0, !- Field 17
|
|
For: Sunday Holidays AllOtherDays, !- Field 19
|
|
Until: 08:00,1.0, !- Field 20
|
|
Until: 17:00,0.0, !- Field 22
|
|
Until: 24:00,1.0; !- Field 24
|
|
|
|
Schedule:Compact,
|
|
INFIL_HALF_ON_SCH, !- Name
|
|
fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 06:00,1.0, !- Field 3
|
|
Until: 21:00,0.5, !- Field 5
|
|
Until: 24:00,1.0, !- Field 7
|
|
For: Saturday, !- Field 9
|
|
Until: 06:00,1.0, !- Field 10
|
|
Until: 22:00,0.5, !- Field 12
|
|
Until: 24:00,1.0, !- Field 14
|
|
For: WinterDesignDay, !- Field 16
|
|
Until: 24:00,1.0, !- Field 17
|
|
For: Sunday Holidays AllOtherDays, !- Field 19
|
|
Until: 08:00,1.0, !- Field 20
|
|
Until: 17:00,0.5, !- Field 22
|
|
Until: 24:00,1.0; !- Field 24
|
|
|
|
Schedule:Compact,
|
|
INFIL_Door_Opening_SCH, !- Name
|
|
fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 08:00,0.0, !- Field 3
|
|
Until: 12:00,
|
|
0.131, !- Field 6
|
|
Until: 18:00,1.0, !- Field 7
|
|
Until: 20:00,
|
|
0.131, !- Field 10
|
|
Until: 24:00,0.0; !- Field 11
|
|
|
|
|
|
Schedule:Compact,
|
|
BLDG_SWH_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 01:00,0.00, !- Field 3
|
|
Until: 03:00,0.00, !- Field 5
|
|
Until: 07:00,0.00, !- Field 7
|
|
Until: 08:00,0.15, !- Field 9
|
|
Until: 09:00,0.23, !- Field 11
|
|
Until: 10:00,0.32, !- Field 13
|
|
Until: 11:00,0.41, !- Field 15
|
|
Until: 12:00,0.57, !- Field 17
|
|
Until: 13:00,0.62, !- Field 19
|
|
Until: 14:00,0.61, !- Field 21
|
|
Until: 15:00,0.5, !- Field 23
|
|
Until: 16:00,0.45, !- Field 25
|
|
Until: 17:00,0.46, !- Field 27
|
|
Until: 18:00,0.47, !- Field 29
|
|
Until: 19:00,0.42, !- Field 31
|
|
Until: 20:00,0.34, !- Field 33
|
|
Until: 21:00,0.33, !- Field 35
|
|
Until: 22:00,0.00, !- Field 37
|
|
Until: 23:00,0.00, !- Field 39
|
|
Until: 24:00,0.00, !- Field 41
|
|
For: Saturday WinterDesignDay, !- Field 43
|
|
Until: 01:00,0.00, !- Field 44
|
|
Until: 02:00,0.00, !- Field 46
|
|
Until: 03:00,0.00, !- Field 48
|
|
Until: 06:00,0.00, !- Field 50
|
|
Until: 07:00,0.00, !- Field 52
|
|
Until: 08:00,0.2, !- Field 54
|
|
Until: 09:00,0.24, !- Field 56
|
|
Until: 10:00,0.27, !- Field 58
|
|
Until: 11:00,0.42, !- Field 60
|
|
Until: 12:00,0.54, !- Field 62
|
|
Until: 13:00,0.59, !- Field 64
|
|
Until: 14:00,0.6, !- Field 66
|
|
Until: 15:00,0.49, !- Field 68
|
|
Until: 16:00,0.48, !- Field 70
|
|
Until: 17:00,0.47, !- Field 72
|
|
Until: 18:00,0.46, !- Field 74
|
|
Until: 19:00,0.44, !- Field 76
|
|
Until: 20:00,0.36, !- Field 78
|
|
Until: 21:00,0.29, !- Field 80
|
|
Until: 22:00,0.22, !- Field 82
|
|
Until: 23:00,0.00, !- Field 84
|
|
Until: 24:00,0.00, !- Field 86
|
|
For: Sunday Holidays AllOtherDays, !- Field 88
|
|
Until: 03:00,0.00, !- Field 89
|
|
Until: 06:00,0.00, !- Field 91
|
|
Until: 07:00,0.00, !- Field 93
|
|
Until: 08:00,0.00, !- Field 95
|
|
Until: 09:00,0.00, !- Field 97
|
|
Until: 10:00,0.14, !- Field 99
|
|
Until: 11:00,0.29, !- Field 101
|
|
Until: 12:00,0.31, !- Field 103
|
|
Until: 14:00,0.36, !- Field 105
|
|
Until: 15:00,0.34, !- Field 107
|
|
Until: 16:00,0.35, !- Field 109
|
|
Until: 17:00,0.37, !- Field 111
|
|
Until: 18:00,0.34, !- Field 113
|
|
Until: 19:00,0.25, !- Field 115
|
|
Until: 20:00,0.00, !- Field 117
|
|
Until: 21:00,0.00, !- Field 119
|
|
Until: 22:00,0.00, !- Field 121
|
|
Until: 23:00,0.00, !- Field 123
|
|
Until: 24:00,0.00; !- Field 125
|
|
|
|
Schedule:Compact,
|
|
Hours_of_operation, !- Name
|
|
on/off, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 06:00,0.0, !- Field 3
|
|
Until: 21:00,1.0, !- Field 5
|
|
Until: 24:00,0.0, !- Field 7
|
|
For: Saturday WinterDesignDay, !- Field 9
|
|
Until: 06:00,0.0, !- Field 10
|
|
Until: 22:00,1.0, !- Field 12
|
|
Until: 24:00,0.0, !- Field 14
|
|
For: Sunday Holidays AllOtherDays, !- Field 16
|
|
Until: 08:00,0.0, !- Field 17
|
|
Until: 19:00,1.0, !- Field 19
|
|
Until: 24:00,0.0; !- Field 21
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Hot Water Setpoint Temp Schedule, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
THROUGH: 12/31, !- Field 1
|
|
FOR: AllDays, !- Field 2
|
|
UNTIL: 24:00,60.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
ALWAYS_ON, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Exterior_Lgt_ALWAYS_ON, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1; !- Field 3
|
|
|
|
|
|
Schedule:Compact,
|
|
Exterior_Lgt_189_1, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through:12/31, !- Field 1
|
|
For:Weekdays, !- Field 2
|
|
Until: 9:00,0.5, !- Field 3
|
|
Until: 21:00,1.0, !- Field 5
|
|
Until: 24:00,0.5, !- Field 7
|
|
For:Saturday, !- Field 9
|
|
Until: 9:00,0.5, !- Field 10
|
|
Until: 22:00,1.0, !- Field 12
|
|
Until: 24:00,0.5, !- Field 14
|
|
For:Sunday Holidays AllOtherDays, !- Field 16
|
|
Until: 9:00,0.5, !- Field 17
|
|
Until: 19:00,1.0, !- Field 19
|
|
Until: 24:00,0.5; !- Field 21
|
|
|
|
Schedule:Compact,
|
|
ALWAYS_OFF, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.0; !- Field 3
|
|
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
HVACOperationSchd, !- Name
|
|
on/off, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 06:00,0.0, !- Field 3
|
|
Until: 21:00,1.0, !- Field 5
|
|
Until: 24:00,0.0, !- Field 7
|
|
For: Saturday WinterDesignDay, !- Field 9
|
|
Until: 06:00,0.0, !- Field 10
|
|
Until: 22:00,1.0, !- Field 12
|
|
Until: 24:00,0.0, !- Field 14
|
|
For: Sunday Holidays AllOtherDays, !- Field 16
|
|
Until: 08:00,0.0, !- Field 17
|
|
Until: 19:00,1.0, !- Field 19
|
|
Until: 24:00,0.0; !- Field 21
|
|
|
|
Schedule:Compact,
|
|
PlantOnSched, !- Name
|
|
On/Off, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
FAN_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
ReheatCoilAvailSched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
CoolingCoilAvailSched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
HTGSETP_SCH_YES_OPTIMUM, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: WinterDesignDay, !- Field 2
|
|
Until: 06:00,15.56, !- Field 3
|
|
Until: 07:00,18.33, !- Field 5
|
|
Until: 21:00,21.11, !- Field 7
|
|
Until: 24:00,15.56, !- Field 9
|
|
For: Weekdays, !- Field 11
|
|
Until: 05:00,15.56, !- Field 12
|
|
Until: 06:00,17.8, !- Field 14
|
|
Until: 07:00,20.0, !- Field 16
|
|
Until: 21:00,21.11, !- Field 18
|
|
Until: 24:00,15.56, !- Field 20
|
|
For SummerDesignDay, !- Field 22
|
|
Until: 24:00,15.56, !- Field 23
|
|
For: Saturday, !- Field 25
|
|
Until: 05:00,15.56, !- Field 26
|
|
Until: 06:00,17.8, !- Field 28
|
|
Until: 07:00,20.0, !- Field 30
|
|
Until: 22:00,21.11, !- Field 32
|
|
Until: 24:00,15.56, !- Field 34
|
|
For: Sunday Holidays AllOtherDays, !- Field 36
|
|
Until: 07:00,15.56, !- Field 37
|
|
Until: 08:00,17.8, !- Field 39
|
|
Until: 09:00,20.0, !- Field 41
|
|
Until: 19:00,21.11, !- Field 43
|
|
Until: 24:00,15.56; !- Field 45
|
|
|
|
Schedule:Compact,
|
|
HTGSETP_SCH_YES_OPTIMUM_ORIGINAL, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: WinterDesignDay, !- Field 2
|
|
Until: 06:00,15.56, !- Field 3
|
|
Until: 07:00,18.33, !- Field 5
|
|
Until: 21:00,21.11, !- Field 7
|
|
Until: 24:00,15.56, !- Field 9
|
|
For: Weekdays, !- Field 11
|
|
Until: 05:00,15.56, !- Field 12
|
|
Until: 06:00,17.8, !- Field 14
|
|
Until: 07:00,20.0, !- Field 16
|
|
Until: 21:00,21.11, !- Field 18
|
|
Until: 24:00,15.56, !- Field 20
|
|
For SummerDesignDay, !- Field 22
|
|
Until: 24:00,15.56, !- Field 23
|
|
For: Saturday, !- Field 25
|
|
Until: 05:00,15.56, !- Field 26
|
|
Until: 06:00,17.8, !- Field 28
|
|
Until: 07:00,20.0, !- Field 30
|
|
Until: 22:00,21.11, !- Field 32
|
|
Until: 24:00,15.56, !- Field 34
|
|
For: Sunday Holidays AllOtherDays, !- Field 36
|
|
Until: 07:00,15.56, !- Field 37
|
|
Until: 08:00,17.8, !- Field 39
|
|
Until: 09:00,20.0, !- Field 41
|
|
Until: 19:00,21.11, !- Field 43
|
|
Until: 24:00,15.56; !- Field 45
|
|
|
|
Schedule:Compact,
|
|
HTGSETP_SCH_NO_OPTIMUM, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: WinterDesignDay, !- Field 2
|
|
Until: 06:00,15.56, !- Field 3
|
|
Until: 07:00,18.33, !- Field 5
|
|
Until: 21:00,21.11, !- Field 7
|
|
Until: 24:00,15.56, !- Field 9
|
|
For: Weekdays, !- Field 11
|
|
Until: 05:00,15.56, !- Field 12
|
|
Until: 06:00,21.11, !- Field 14
|
|
Until: 07:00,21.11, !- Field 16
|
|
Until: 21:00,21.11, !- Field 18
|
|
Until: 24:00,15.56, !- Field 20
|
|
For SummerDesignDay, !- Field 22
|
|
Until: 24:00,15.56, !- Field 23
|
|
For: Saturday, !- Field 25
|
|
Until: 05:00,15.56, !- Field 26
|
|
Until: 06:00,21.11, !- Field 28
|
|
Until: 07:00,21.11, !- Field 30
|
|
Until: 22:00,21.11, !- Field 32
|
|
Until: 24:00,15.56, !- Field 34
|
|
For: Sunday Holidays AllOtherDays, !- Field 36
|
|
Until: 07:00,15.56, !- Field 37
|
|
Until: 08:00,21.11, !- Field 39
|
|
Until: 09:00,21.11, !- Field 41
|
|
Until: 19:00,21.11, !- Field 43
|
|
Until: 24:00,15.56; !- Field 45
|
|
|
|
Schedule:Compact,
|
|
HTGSETP_SCH_FrontEntry_STD2013, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: WinterDesignDay, !- Field 2
|
|
Until: 06:00,15.56, !- Field 3
|
|
Until: 07:00,16, !- Field 5
|
|
Until: 21:00,16, !- Field 7
|
|
Until: 24:00,15.56, !- Field 9
|
|
For: Weekdays, !- Field 2
|
|
Until: 06:00,15.56, !- Field 3
|
|
Until: 07:00,16, !- Field 5
|
|
Until: 21:00,16, !- Field 7
|
|
Until: 24:00,15.56, !- Field 9
|
|
For SummerDesignDay, !- Field 11
|
|
Until: 24:00,15.56, !- Field 12
|
|
For: Saturday, !- Field 14
|
|
Until: 06:00,15.56, !- Field 15
|
|
Until: 07:00,16, !- Field 17
|
|
Until: 22:00,16, !- Field 19
|
|
Until: 24:00,15.56, !- Field 21
|
|
For: Sunday Holidays AllOtherDays, !- Field 23
|
|
Until: 8:00,15.56, !- Field 24
|
|
Until: 9:00,16, !- Field 26
|
|
Until: 19:00,16, !- Field 28
|
|
Until: 24:00,15.56; !- Field 30
|
|
|
|
Schedule:Compact,
|
|
HTGSETP_SCH_FrontEntry_VT, !- vestibules control schedule for Vermont
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
FOR: AllDays, !- Field 2
|
|
UNTIL: 24:00,13.0; !- Field 3
|
|
Schedule:Compact,
|
|
HTGSETP_SCH_PSZ_AC_2, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: WinterDesignDay, !- Field 2
|
|
Until: 06:00,15.56, !- Field 3
|
|
Until: 07:00,18.33, !- Field 5
|
|
Until: 21:00,21.11, !- Field 7
|
|
Until: 24:00,15.56, !- Field 9
|
|
For: Weekdays, !- Field 11
|
|
Until: 05:00,15.56, !- Field 12
|
|
Until: 06:00,21.11, !- Field 14
|
|
Until: 07:00,21.11, !- Field 16
|
|
Until: 21:00,21.11, !- Field 18
|
|
Until: 24:00,15.56, !- Field 20
|
|
For SummerDesignDay, !- Field 22
|
|
Until: 24:00,15.56, !- Field 23
|
|
For: Saturday, !- Field 25
|
|
Until: 05:00,15.56, !- Field 26
|
|
Until: 06:00,21.11, !- Field 28
|
|
Until: 07:00,21.11, !- Field 30
|
|
Until: 22:00,21.11, !- Field 32
|
|
Until: 24:00,15.56, !- Field 34
|
|
For: Sunday Holidays AllOtherDays, !- Field 36
|
|
Until: 07:00,15.56, !- Field 37
|
|
Until: 08:00,21.11, !- Field 39
|
|
Until: 09:00,21.11, !- Field 41
|
|
Until: 19:00,21.11, !- Field 43
|
|
Until: 24:00,15.56; !- Field 45
|
|
|
|
Schedule:Compact,
|
|
CLGSETP_SCH_YES_OPTIMUM, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay, !- Field 2
|
|
Until: 06:00,29.44, !- Field 3
|
|
Until: 07:00,26.67, !- Field 5
|
|
Until: 21:00,23.89, !- Field 7
|
|
Until: 24:00,29.44, !- Field 9
|
|
For: Weekdays, !- Field 11
|
|
Until: 05:00,29.44, !- Field 12
|
|
Until: 06:00,27.8, !- Field 14
|
|
Until: 07:00,25.6, !- Field 16
|
|
Until: 21:00,23.89, !- Field 18
|
|
Until: 24:00,29.44, !- Field 20
|
|
For: Saturday, !- Field 22
|
|
Until: 05:00,29.44, !- Field 23
|
|
Until: 06:00,27.8, !- Field 25
|
|
Until: 07:00,25.6, !- Field 27
|
|
Until: 22:00,23.89, !- Field 29
|
|
Until: 24:00,29.44, !- Field 31
|
|
For WinterDesignDay, !- Field 33
|
|
Until: 24:00,29.44, !- Field 34
|
|
For: Sunday Holidays AllOtherDays, !- Field 36
|
|
Until: 07:00,29.44, !- Field 37
|
|
Until: 08:00,27.8, !- Field 39
|
|
Until: 09:00,25.6, !- Field 41
|
|
Until: 19:00,23.89, !- Field 43
|
|
Until: 24:00,29.44; !- Field 45
|
|
|
|
Schedule:Compact,
|
|
CLGSETP_SCH_YES_OPTIMUM_ORIGINAL, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay, !- Field 2
|
|
Until: 06:00,29.44, !- Field 3
|
|
Until: 07:00,26.67, !- Field 5
|
|
Until: 21:00,23.89, !- Field 7
|
|
Until: 24:00,29.44, !- Field 9
|
|
For: Weekdays, !- Field 11
|
|
Until: 05:00,29.44, !- Field 12
|
|
Until: 06:00,27.8, !- Field 14
|
|
Until: 07:00,25.6, !- Field 16
|
|
Until: 21:00,23.89, !- Field 18
|
|
Until: 24:00,29.44, !- Field 20
|
|
For: Saturday, !- Field 22
|
|
Until: 05:00,29.44, !- Field 23
|
|
Until: 06:00,27.8, !- Field 25
|
|
Until: 07:00,25.6, !- Field 27
|
|
Until: 22:00,23.89, !- Field 29
|
|
Until: 24:00,29.44, !- Field 31
|
|
For WinterDesignDay, !- Field 33
|
|
Until: 24:00,29.44, !- Field 34
|
|
For: Sunday Holidays AllOtherDays, !- Field 36
|
|
Until: 07:00,29.44, !- Field 37
|
|
Until: 08:00,27.8, !- Field 39
|
|
Until: 09:00,25.6, !- Field 41
|
|
Until: 19:00,23.89, !- Field 43
|
|
Until: 24:00,29.44; !- Field 45
|
|
|
|
Schedule:Compact,
|
|
CLGSETP_SCH_NO_OPTIMUM, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay, !- Field 2
|
|
Until: 06:00,29.44, !- Field 3
|
|
Until: 07:00,26.67, !- Field 5
|
|
Until: 21:00,23.89, !- Field 7
|
|
Until: 24:00,29.44, !- Field 9
|
|
For: Weekdays, !- Field 11
|
|
Until: 05:00,29.44, !- Field 12
|
|
Until: 06:00,23.89, !- Field 14
|
|
Until: 07:00,23.89, !- Field 16
|
|
Until: 21:00,23.89, !- Field 18
|
|
Until: 24:00,29.44, !- Field 20
|
|
For: Saturday, !- Field 22
|
|
Until: 05:00,29.44, !- Field 23
|
|
Until: 06:00,23.89, !- Field 25
|
|
Until: 07:00,23.89, !- Field 27
|
|
Until: 22:00,23.89, !- Field 29
|
|
Until: 24:00,29.44, !- Field 31
|
|
For WinterDesignDay, !- Field 33
|
|
Until: 24:00,29.44, !- Field 34
|
|
For: Sunday Holidays AllOtherDays, !- Field 36
|
|
Until: 07:00,29.44, !- Field 37
|
|
Until: 08:00,23.89, !- Field 39
|
|
Until: 09:00,23.89, !- Field 41
|
|
Until: 19:00,23.89, !- Field 43
|
|
Until: 24:00,29.44; !- Field 45
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
CLGSETP_SCH_PSZ_AC_2, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay, !- Field 2
|
|
Until: 06:00,29.44, !- Field 3
|
|
Until: 07:00,26.67, !- Field 5
|
|
Until: 21:00,23.89, !- Field 7
|
|
Until: 24:00,29.44, !- Field 9
|
|
For: Weekdays, !- Field 11
|
|
Until: 05:00,29.44, !- Field 12
|
|
Until: 06:00,23.89, !- Field 14
|
|
Until: 07:00,23.89, !- Field 16
|
|
Until: 21:00,23.89, !- Field 18
|
|
Until: 24:00,29.44, !- Field 20
|
|
For: Saturday, !- Field 22
|
|
Until: 05:00,29.44, !- Field 23
|
|
Until: 06:00,23.89, !- Field 25
|
|
Until: 07:00,23.89, !- Field 27
|
|
Until: 22:00,23.89, !- Field 29
|
|
Until: 24:00,29.44, !- Field 31
|
|
For WinterDesignDay, !- Field 33
|
|
Until: 24:00,29.44, !- Field 34
|
|
For: Sunday Holidays AllOtherDays, !- Field 36
|
|
Until: 07:00,29.44, !- Field 37
|
|
Until: 08:00,23.89, !- Field 39
|
|
Until: 09:00,23.89, !- Field 41
|
|
Until: 19:00,23.89, !- Field 43
|
|
Until: 24:00,29.44; !- Field 45
|
|
|
|
Schedule:Compact,
|
|
CLGSETP_SCH_NO_SETBACK, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay, !- Field 2
|
|
Until: 06:00,29.44, !- Field 3
|
|
Until: 07:00,26.67, !- Field 5
|
|
Until: 21:00,23.89, !- Field 7
|
|
Until: 24:00,29.44, !- Field 9
|
|
For: Weekdays, !- Field 11
|
|
Until: 05:00,23.89, !- Field 12
|
|
Until: 06:00,23.89, !- Field 14
|
|
Until: 07:00,23.89, !- Field 16
|
|
Until: 21:00,23.89, !- Field 18
|
|
Until: 24:00,23.89, !- Field 20
|
|
For: Saturday, !- Field 22
|
|
Until: 05:00,23.89, !- Field 23
|
|
Until: 06:00,23.89, !- Field 25
|
|
Until: 07:00,23.89, !- Field 27
|
|
Until: 22:00,23.89, !- Field 29
|
|
Until: 24:00,23.89, !- Field 31
|
|
For WinterDesignDay, !- Field 33
|
|
Until: 24:00,29.44, !- Field 34
|
|
For: Sunday Holidays AllOtherDays, !- Field 36
|
|
Until: 07:00,23.89, !- Field 37
|
|
Until: 08:00,23.89, !- Field 39
|
|
Until: 09:00,23.89, !- Field 41
|
|
Until: 19:00,23.89, !- Field 43
|
|
Until: 24:00,23.89; !- Field 45
|
|
|
|
Schedule:Compact,
|
|
Humidity Setpoint Schedule, !- Name
|
|
Humidity, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 24:00,50, !- Field 3
|
|
For: Saturday WinterDesignDay, !- Field 5
|
|
Until: 24:00,50, !- Field 6
|
|
For: Sunday Holidays AllOtherDays, !- Field 8
|
|
Until: 24:00,50; !- Field 9
|
|
|
|
Schedule:Compact,
|
|
MinOA_MotorizedDamper_Sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 07:00,0.0, !- Field 3
|
|
Until: 21:00,1.0, !- Field 5
|
|
Until: 24:00,0.0, !- Field 7
|
|
For: Saturday, !- Field 9
|
|
Until: 07:00,0.0, !- Field 10
|
|
Until: 22:00,1.0, !- Field 12
|
|
Until: 24:00,0.0, !- Field 14
|
|
For: WinterDesignDay, !- Field 16
|
|
Until: 24:00,1.0, !- Field 17
|
|
For: Sunday Holidays AllOtherDays, !- Field 19
|
|
Until: 09:00,0.0, !- Field 20
|
|
Until: 19:00,1.0, !- Field 22
|
|
Until: 24:00,0.0; !- Field 24
|
|
|
|
Schedule:Compact,
|
|
MinOA_Sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Dual Zone Control Type Sched, !- Name
|
|
Control Type, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,4; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Seasonal-Reset-Supply-Air-Temp-Sch, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 3/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,13.0, !- Field 3
|
|
Through: 9/30, !- Field 5
|
|
For: AllDays, !- Field 6
|
|
Until: 24:00,13.0, !- Field 7
|
|
Through: 12/31, !- Field 9
|
|
For: AllDays, !- Field 10
|
|
Until: 24:00,13.0; !- Field 11
|
|
|
|
Schedule:Compact,
|
|
CW-Loop-Temp-Schedule, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,6.7; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
HW-Loop-Temp-Schedule, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Heating-Supply-Air-Temp-Sch, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,16.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
ACTIVITY_SCH, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,120.; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
WORK_EFF_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
AIR_VELO_SCH, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
CLOTHING_SCH, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 04/30, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0, !- Field 3
|
|
Through: 09/30, !- Field 5
|
|
For: AllDays, !- Field 6
|
|
Until: 24:00,0.5, !- Field 7
|
|
Through: 12/31, !- Field 9
|
|
For: AllDays, !- Field 10
|
|
Until: 24:00,1.0; !- Field 11
|
|
|
|
Schedule:Compact,
|
|
SHADING_SCH, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.0; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
FRONT_ENTRY_COOLING, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,100.; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
INFIL_SCH_PNNL, !- Name
|
|
fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 06:00,1.0, !- Field 3
|
|
Until: 21:00,0.25, !- Field 5
|
|
Until: 24:00,1.0, !- Field 7
|
|
For: Saturday WinterDesignDay, !- Field 9
|
|
Until: 06:00,1.0, !- Field 10
|
|
Until: 22:00,0.25, !- Field 12
|
|
Until: 24:00,1.0, !- Field 14
|
|
For: Sunday Holidays AllOtherDays, !- Field 16
|
|
Until: 08:00,1.0, !- Field 17
|
|
Until: 19:00,0.25, !- Field 19
|
|
Until: 24:00,1.0; !- Field 21
|
|
|
|
Schedule:Constant,SZ_system_OA_Max_Frac_SCH,Fraction,
|
|
0.75;
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: GLOBALGEOMETRYRULES ===========
|
|
|
|
GlobalGeometryRules,
|
|
UpperLeftCorner, !- Starting Vertex Position
|
|
Counterclockwise, !- Vertex Entry Direction
|
|
Relative, !- Coordinate System
|
|
Relative; !- Daylighting Reference Point Coordinate System
|
|
|
|
|
|
Construction:FfactorGroundFloor,
|
|
Back_Space_Floor_Ffactor, !- Name
|
|
0.88281, !- F-Factor
|
|
379.8899999999999, !- Area
|
|
68.27000000000001; !- PerimeterExposed
|
|
|
|
Construction:FfactorGroundFloor,
|
|
Core_Retail_Floor_Ffactor, !- Name
|
|
0.88281, !- F-Factor
|
|
1600.4829, !- Area
|
|
58.53999999999999; !- PerimeterExposed
|
|
|
|
Construction:FfactorGroundFloor,
|
|
Point_Of_Sale_Floor_Ffactor, !- Name
|
|
0.88281, !- F-Factor
|
|
150.81, !- Area
|
|
31.135; !- PerimeterExposed
|
|
|
|
Construction:FfactorGroundFloor,
|
|
Front_Retail_Floor_Ffactor, !- Name
|
|
0.88281, !- F-Factor
|
|
150.81, !- Area
|
|
31.135; !- PerimeterExposed
|
|
|
|
Construction:FfactorGroundFloor,
|
|
Front_Entry_Floor_Ffactor, !- Name
|
|
0.88281, !- F-Factor
|
|
12.0, !- Area
|
|
4.0; !- PerimeterExposed
|
|
|
|
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ZONE ===========
|
|
|
|
Zone,
|
|
Back_Space, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
35.2700, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
2317.3300, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Core_Retail, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
6.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
9762.9500, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Point_Of_Sale, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
919.9410, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Front_Retail, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
29.1350, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
919.9410, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Front_Entry, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
25.1350, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
-9999.0000, !- Ceiling Height {m}
|
|
73.2000, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: BUILDINGSURFACE:DETAILED ===========
|
|
|
|
BuildingSurface:Detailed,
|
|
Back_Space_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
Back_Space_Floor_Ffactor, !- Construction Name
|
|
Back_Space, !- Zone Name
|
|
GroundFCfactorMethod, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
54.2700,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,7.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
54.2700,7.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Back_Space_Roof, !- Name
|
|
Roof, !- Surface Type
|
|
nonres_roof, !- Construction Name
|
|
Back_Space, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
54.2700,0.0000,6.0960, !- X,Y,Z ==> Vertex 2 {m}
|
|
54.2700,7.0000,6.0960, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,7.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Back_Space_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Back_Space, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
54.2700,0.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
54.2700,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
54.2700,7.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
54.2700,7.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Back_Space_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Back_Space, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
54.2700,7.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
54.2700,7.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,7.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,7.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Back_Space_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Back_Space, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,7.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,7.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Back_Space_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Back_Space, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Core_Retail_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
54.2700,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
54.2700,0.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_Retail_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
Core_Retail_Floor_Ffactor, !- Construction Name
|
|
Core_Retail, !- Zone Name
|
|
GroundFCfactorMethod, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
8, !- Number of Vertices
|
|
25.1350,-3.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
25.1350,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,29.2700,0.0000, !- X,Y,Z ==> Vertex 4 {m}
|
|
54.2700,29.2700,0.0000, !- X,Y,Z ==> Vertex 5 {m}
|
|
54.2700,0.0000,0.0000, !- X,Y,Z ==> Vertex 6 {m}
|
|
29.1350,0.0000,0.0000, !- X,Y,Z ==> Vertex 7 {m}
|
|
29.1350,-3.0000,0.0000; !- X,Y,Z ==> Vertex 8 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_Retail_Wall_South_3,!- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Core_Retail, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Front_Retail_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
29.1350,0.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
29.1350,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
54.2700,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
54.2700,0.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_Retail_Wall_South_1,!- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Core_Retail, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Point_Of_Sale_Wall_North,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
25.1350,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
25.1350,0.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_Retail_Wall_East_1, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Core_Retail, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Front_Retail_Wall_West_2,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
29.1350,-3.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
29.1350,-3.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
29.1350,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
29.1350,0.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_Retail_Wall_South_2,!- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Core_Retail, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Front_Entry_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
25.1350,-3.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
25.1350,-3.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
29.1350,-3.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
29.1350,-3.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_Retail_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Core_Retail, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Back_Space_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
54.2700,29.2700,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
54.2700,29.2700,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,29.2700,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,29.2700,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_Retail_Wall_West_2, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Core_Retail, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,29.2700,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,29.2700,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_Retail_Roof, !- Name
|
|
Roof, !- Surface Type
|
|
nonres_roof, !- Construction Name
|
|
Core_Retail, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
8, !- Number of Vertices
|
|
25.1350,0.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
25.1350,-3.0000,6.0960, !- X,Y,Z ==> Vertex 2 {m}
|
|
29.1350,-3.0000,6.0960, !- X,Y,Z ==> Vertex 3 {m}
|
|
29.1350,0.0000,6.0960, !- X,Y,Z ==> Vertex 4 {m}
|
|
54.2700,0.0000,6.0960, !- X,Y,Z ==> Vertex 5 {m}
|
|
54.2700,29.2700,6.0960, !- X,Y,Z ==> Vertex 6 {m}
|
|
0.0000,29.2700,6.0960, !- X,Y,Z ==> Vertex 7 {m}
|
|
0.0000,0.0000,6.0960; !- X,Y,Z ==> Vertex 8 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_Retail_Wall_East_2, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Core_Retail, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
54.2700,0.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
54.2700,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
54.2700,29.2700,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
54.2700,29.2700,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_Retail_Wall_West_1, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Core_Retail, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Point_Of_Sale_Wall_East_2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
25.1350,0.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
25.1350,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
25.1350,-3.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
25.1350,-3.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Point_Of_Sale_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
Point_Of_Sale_Floor_Ffactor, !- Construction Name
|
|
Point_Of_Sale, !- Zone Name
|
|
GroundFCfactorMethod, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,6.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
25.1350,6.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
25.1350,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Point_Of_Sale_Wall_South,!- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Point_Of_Sale, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
25.1350,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
25.1350,0.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Point_Of_Sale_Wall_East_2, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Point_Of_Sale, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Core_Retail_Wall_West_1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
25.1350,3.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
25.1350,3.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
25.1350,6.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
25.1350,6.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Point_Of_Sale_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Point_Of_Sale, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,6.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,6.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Point_Of_Sale_Wall_North,!- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Point_Of_Sale, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Core_Retail_Wall_South_1,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
25.1350,6.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
25.1350,6.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,6.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,6.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Point_Of_Sale_Roof, !- Name
|
|
Roof, !- Surface Type
|
|
nonres_roof, !- Construction Name
|
|
Point_Of_Sale, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,6.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,6.0960, !- X,Y,Z ==> Vertex 2 {m}
|
|
25.1350,0.0000,6.0960, !- X,Y,Z ==> Vertex 3 {m}
|
|
25.1350,6.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Point_Of_Sale_Wall_East_1, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Point_Of_Sale, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Front_Entry_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
25.1350,0.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
25.1350,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
25.1350,3.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
25.1350,3.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Front_Retail_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
Front_Retail_Floor_Ffactor, !- Construction Name
|
|
Front_Retail, !- Zone Name
|
|
GroundFCfactorMethod, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
25.1350,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,6.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
25.1350,6.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Front_Retail_Walll_East, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Front_Retail, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
25.1350,0.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
25.1350,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
25.1350,6.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
25.1350,6.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Front_Retail_Wall_West_1,!- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Front_Retail, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Front_Entry_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,3.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,3.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Front_Retail_Roof, !- Name
|
|
Roof, !- Surface Type
|
|
nonres_roof, !- Construction Name
|
|
Front_Retail, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
25.1350,0.0000,6.0960, !- X,Y,Z ==> Vertex 2 {m}
|
|
25.1350,6.0000,6.0960, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,6.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Front_Retail_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Front_Retail, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Core_Retail_Wall_South_3,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
25.1350,6.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
25.1350,6.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,6.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,6.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Front_Retail_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Front_Retail, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
25.1350,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
25.1350,0.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Front_Retail_Wall_West_2,!- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Front_Retail, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Core_Retail_Wall_East_1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,6.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,6.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,3.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,3.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Front_Entry_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
Front_Entry_Floor_Ffactor, !- Construction Name
|
|
Front_Entry, !- Zone Name
|
|
GroundFCfactorMethod, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,3.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.0000,3.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Front_Entry_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Front_Entry, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Front_Retail_Wall_West_1,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.0000,0.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.0000,3.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.0000,3.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Front_Entry_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Front_Entry, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Core_Retail_Wall_South_2,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.0000,3.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.0000,3.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,3.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,3.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Front_Entry_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Front_Entry, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.0000,0.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Front_Entry_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Front_Entry, !- Zone Name
|
|
Surface, !- Outside Boundary Condition
|
|
Point_Of_Sale_Wall_East_1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,3.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,3.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Front_Entry_Roof, !- Name
|
|
Roof, !- Surface Type
|
|
nonres_roof, !- Construction Name
|
|
Front_Entry, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,3.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,6.0960, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.0000,0.0000,6.0960, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.0000,3.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: FENESTRATIONSURFACE:DETAILED ===========
|
|
|
|
FenestrationSurface:Detailed,
|
|
Point_Of_Sale_Wall_South_Glazing, !- Name
|
|
Window, !- Surface Type
|
|
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name !
|
|
Point_Of_Sale_Wall_South,!- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.050,0.0000,2.6600, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.050,0.0000,1.1400, !- X,Y,Z ==> Vertex 2 {m}
|
|
25.085,0.0000,1.1400, !- X,Y,Z ==> Vertex 3 {m}
|
|
25.085,0.0000,2.6600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Front_Retail_Wall_South_Glazing, !- Name
|
|
Window, !- Surface Type
|
|
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name !
|
|
Front_Retail_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.050,0.0000,2.6600, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.050,0.0000,1.1400, !- X,Y,Z ==> Vertex 2 {m}
|
|
25.085,0.0000,1.1400, !- X,Y,Z ==> Vertex 3 {m}
|
|
25.085,0.0000,2.6600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Front_Entry_Wall_South_Glazing, !- Name
|
|
Window, !- Surface Type
|
|
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name !
|
|
Front_Entry_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.500,0.0000,2.6600, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.500,0.0000,0.0500, !- X,Y,Z ==> Vertex 2 {m}
|
|
3.500,0.0000,0.0500, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.500,0.0000,2.6600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Core_Retail_Wall_West_2_Door3, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door_con, !- Construction Name
|
|
Core_Retail_Wall_West_2, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000000000000,2.538037755411,2.133600000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.000000000000,2.538037755411,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.000000000000,1.623637755411,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000000000000,1.623637755411,2.133600000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Core_Retail_Wall_West_2_Door2, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door_con, !- Construction Name
|
|
Core_Retail_Wall_West_2, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000000000000,13.841575894014,2.133600000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.000000000000,13.841575894014,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.000000000000,12.927175894014,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000000000000,12.927175894014,2.133600000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Core_Retail_Wall_West_2_Door1, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door_con, !- Construction Name
|
|
Core_Retail_Wall_West_2, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000000000000,25.062342286061,2.133600000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.000000000000,25.062342286061,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.000000000000,24.147942286061,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000000000000,24.147942286061,2.133600000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Core_Retail_Wall_East_2_Door1, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door_con, !- Construction Name
|
|
Core_Retail_Wall_East_2, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
54.270000000000,3.438494104366,2.133600000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
54.270000000000,3.438494104366,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
54.270000000000,4.352894104366,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
54.270000000000,4.352894104366,2.133600000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Core_Retail_Wall_East_2_Door2, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door_con, !- Construction Name
|
|
Core_Retail_Wall_East_2, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
54.270000000000,13.809396313442,2.133600000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
54.270000000000,13.809396313442,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
54.270000000000,14.723796313442,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
54.270000000000,14.723796313442,2.133600000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Core_Retail_Wall_East_2_Door3, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door_con, !- Construction Name
|
|
Core_Retail_Wall_East_2, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
54.270000000000,24.234478195589,2.133600000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
54.270000000000,24.234478195589,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
54.270000000000,25.148878195589,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
54.270000000000,25.148878195589,2.133600000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Back_Space_Wall_North_Door1, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door_con, !- Construction Name
|
|
Back_Space_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
44.209918073175,7.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
44.209918073175,7.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
43.295518073175,7.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
43.295518073175,7.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Back_Space_Wall_North_Door2, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door_con, !- Construction Name
|
|
Back_Space_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
11.745274671376,7.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
11.745274671376,7.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.830874671376,7.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.830874671376,7.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Back_Space_Wall_East_RollDoor, !- Name
|
|
Door, !- Surface Type
|
|
Overhead Door_con, !- Construction Name
|
|
Back_Space_Wall_East, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
54.270000000000,2.045406130273,2.438400000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
54.270000000000,2.045406130273,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
54.270000000000,5.093406130273,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
54.270000000000,5.093406130273,2.438400000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Back_Space_Wall_North_RollDoor1, !- Name
|
|
Door, !- Surface Type
|
|
Overhead Door_con, !- Construction Name
|
|
Back_Space_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
37.362862950805,7.000000000000,2.438400000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
37.362862950805,7.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
34.314862950805,7.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
34.314862950805,7.000000000000,2.438400000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Back_Space_Wall_North_RollDoor2, !- Name
|
|
Door, !- Surface Type
|
|
Overhead Door_con, !- Construction Name
|
|
Back_Space_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
28.980588335320,7.000000000000,2.438400000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.980588335320,7.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
25.932588335319,7.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
25.932588335319,7.000000000000,2.438400000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Back_Space_Wall_North_RollDoor3, !- Name
|
|
Door, !- Surface Type
|
|
Overhead Door_con, !- Construction Name
|
|
Back_Space_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
20.310400044305,7.000000000000,2.438400000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
20.310400044305,7.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
17.262400044305,7.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
17.262400044305,7.000000000000,2.438400000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Back_Space_Wall_West_RollDoor, !- Name
|
|
Door, !- Surface Type
|
|
Overhead Door_con, !- Construction Name
|
|
Back_Space_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000000000000,4.739790129493,2.438400000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.000000000000,4.739790129493,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.000000000000,1.691790129493,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000000000000,1.691790129493,2.438400000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
|
|
|
|
|
|
WindowProperty:FrameAndDivider,
|
|
Skylight_Frame, !- Name
|
|
0, !- Frame Width {m}
|
|
, !- Frame Outside Projection {m}
|
|
, !- Frame Inside Projection {m}
|
|
0, !- Frame Conductance {W/m2-K}
|
|
1, !- Ratio of Frame-Edge Glass Conductance to Center-Of-Glass Conductance
|
|
0.7, !- Frame Solar Absorptance
|
|
0.7, !- Frame Visible Absorptance
|
|
0.9, !- Frame Thermal Hemispherical Emissivity
|
|
, !- Divider Type
|
|
, !- Divider Width {m}
|
|
, !- Number of Horizontal Dividers
|
|
, !- Number of Vertical Dividers
|
|
, !- Divider Outside Projection {m}
|
|
, !- Divider Inside Projection {m}
|
|
, !- Divider Conductance {W/m2-K}
|
|
1, !- Ratio of Divider-Edge Glass Conductance to Center-Of-Glass Conductance
|
|
, !- Divider Solar Absorptance
|
|
, !- Divider Visible Absorptance
|
|
0.9; !- Divider Thermal Hemispherical Emissivity
|
|
|
|
!- =========== ALL OBJECTS FOR SKYLIGHTS ===========
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FenestrationSurface:Detailed,
|
|
skylights_R2C4, !- Name
|
|
Window, !- Surface Type
|
|
NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name
|
|
Core_Retail_Roof, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
|
|
Skylight_Frame, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
16.459200,22.869200,6.096000, !- X,Y,Z ==> Vertex 1 {m}
|
|
15.544800,22.869200,6.096000, !- X,Y,Z ==> Vertex 2 {m}
|
|
15.544800,21.954800,6.096000, !- X,Y,Z ==> Vertex 3 {m}
|
|
16.459200,21.954800,6.096000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
skylights_R2C1, !- Name
|
|
Window, !- Surface Type
|
|
NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name
|
|
Core_Retail_Roof, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
Skylight_Frame, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
2.743200,22.869200,6.096000, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.828800,22.869200,6.096000, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.828800,21.954800,6.096000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.743200,21.954800,6.096000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
skylights_R2C2, !- Name
|
|
Window, !- Surface Type
|
|
NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name
|
|
Core_Retail_Roof, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
Skylight_Frame, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
7.315200,22.869200,6.096000, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.400800,22.869200,6.096000, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.400800,21.954800,6.096000, !- X,Y,Z ==> Vertex 3 {m}
|
|
7.315200,21.954800,6.096000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
skylights_R2C3, !- Name
|
|
Window, !- Surface Type
|
|
NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name
|
|
Core_Retail_Roof, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
Skylight_Frame, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
11.887200,22.869200,6.096000, !- X,Y,Z ==> Vertex 1 {m}
|
|
10.972800,22.869200,6.096000, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.972800,21.954800,6.096000, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.887200,21.954800,6.096000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
skylights_R1C3, !- Name
|
|
Window, !- Surface Type
|
|
NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name
|
|
Core_Retail_Roof, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
Skylight_Frame, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
11.887200,27.441200,6.096000, !- X,Y,Z ==> Vertex 1 {m}
|
|
10.972800,27.441200,6.096000, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.972800,26.526800,6.096000, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.887200,26.526800,6.096000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
skylights_R1C1, !- Name
|
|
Window, !- Surface Type
|
|
NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name
|
|
Core_Retail_Roof, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
Skylight_Frame, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
2.743200,27.441200,6.096000, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.828800,27.441200,6.096000, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.828800,26.526800,6.096000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.743200,26.526800,6.096000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
skylights_R1C4, !- Name
|
|
Window, !- Surface Type
|
|
NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name
|
|
Core_Retail_Roof, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
Skylight_Frame, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
16.459200,27.441200,6.096000, !- X,Y,Z ==> Vertex 1 {m}
|
|
15.544800,27.441200,6.096000, !- X,Y,Z ==> Vertex 2 {m}
|
|
15.544800,26.526800,6.096000, !- X,Y,Z ==> Vertex 3 {m}
|
|
16.459200,26.526800,6.096000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
skylights_R1C2, !- Name
|
|
Window, !- Surface Type
|
|
NonresSkylight_U_0.47_SHGC_0.4, !- Construction Name
|
|
Core_Retail_Roof, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
Skylight_Frame, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
7.315200,27.441200,6.096000, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.400800,27.441200,6.096000, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.400800,26.526800,6.096000, !- X,Y,Z ==> Vertex 3 {m}
|
|
7.315200,26.526800,6.096000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: DAYLIGHTING:DETAILED ===========
|
|
|
|
Daylighting:Controls,
|
|
Core_Retail_DaylCtrl, !- Name
|
|
Core_Retail, !- Zone Name
|
|
SplitFlux, !- Daylighting Method
|
|
, !- Availability Schedule Name
|
|
Continuousoff, !- Lighting Control Type
|
|
0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control
|
|
0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control
|
|
3, !- Number of Stepped Control Steps
|
|
1, !- Probability Lighting will be Reset When Needed in Manual Stepped Control
|
|
Core_Retail_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name
|
|
0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg}
|
|
22, !- Maximum Allowable Discomfort Glare Index
|
|
, !- DElight Gridding Resolution {m2}
|
|
Core_Retail_DaylRefPt1, !- Daylighting Reference Point 1 Name
|
|
0.1724, !- Fraction of Zone Controlled by Reference Point 1
|
|
538; !- Illuminance Setpoint at Reference Point 1 {lux}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Core_Retail_DaylRefPt1, !- Name
|
|
Core_Retail, !- Zone Name
|
|
9.144, !- X-Coordinate of Reference Point {m}
|
|
24.698, !- Y-Coordinate of Reference Point {m}
|
|
0; !- Z-Coordinate of Reference Point {m}
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: INTERNALMASS ===========
|
|
|
|
InternalMass,
|
|
Back_Space_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Back_Space, !- Zone Name
|
|
759.7800; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Core_Retail_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Core_Retail, !- Zone Name
|
|
3200.9658; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Point_Of_Sale_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Point_Of_Sale, !- Zone Name
|
|
301.6200; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Front_Retail_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Front_Retail, !- Zone Name
|
|
301.6200; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Front_Entry_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Front_Entry, !- Zone Name
|
|
24.0000; !- Surface Area {m2}
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: PEOPLE ===========
|
|
|
|
People,
|
|
Back_Space, !- Name
|
|
Back_Space, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
6.193, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Core_Retail, !- Name
|
|
Core_Retail, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
6.193, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Point_Of_Sale, !- Name
|
|
Point_Of_Sale, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
6.193, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Front_Retail, !- Name
|
|
Front_Retail, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
6.193, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Front_Entry, !- Name
|
|
Front_Entry, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
People, !- Number of People Calculation Method
|
|
0, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: LIGHTS ===========
|
|
|
|
Lights,
|
|
Back_Space_Lights, !- Name
|
|
Back_Space, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_BACK_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
4.673933137, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Core_Retail_Lights, !- Name
|
|
Core_Retail, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_Core_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.30210594, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Point_Of_Sale_Lights, !- Name
|
|
Point_Of_Sale, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.30210594, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Front_Retail_Lights, !- Name
|
|
Front_Retail, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_FRONT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.30210594, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Front_Entry_Lights, !- Name
|
|
Front_Entry, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_ENTRY_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.04168475, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ELECTRICEQUIPMENT ===========
|
|
|
|
ElectricEquipment,
|
|
Back_Space_MiscPlug_Equip, !- Name
|
|
Back_Space, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
3065.7123, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Core_Retail_MiscPlug_Equip, !- Name
|
|
Core_Retail, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
5169.5598, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Point_Of_Sale_MiscPlug_Equip, !- Name
|
|
Point_Of_Sale, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
3245.4312, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Front_Retail_MiscPlug_Equip, !- Name
|
|
Front_Retail, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
487.1163, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION ===========
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Back_Space_Infiltration, !- Name
|
|
Back_Space, !- Zone or ZoneList Name
|
|
INFIL_SCH_PNNL, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00029756608, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
0.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.2240, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Core_Retail_Infiltration,!- Name
|
|
Core_Retail, !- Zone or ZoneList Name
|
|
INFIL_SCH_PNNL, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00010355072, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
0.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.2240, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Point_Of_Sale_Infiltration, !- Name
|
|
Point_Of_Sale, !- Zone or ZoneList Name
|
|
INFIL_SCH_PNNL, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00031691072, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
0.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.2240, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Front_Retail_Infiltration, !- Name
|
|
Front_Retail, !- Zone or ZoneList Name
|
|
INFIL_SCH_PNNL, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00031691072, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
0.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.2240, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Front_Entry_Infiltration,!- Name
|
|
Front_Entry, !- Zone or ZoneList Name
|
|
INFIL_SCH_PNNL, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.0003812032, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
0.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.2240, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Front_Entry_Door_Infiltration, !- Name
|
|
Front_Entry, !- Zone or ZoneList Name
|
|
INFIL_Door_Opening_SCH, !- Schedule Name
|
|
Flow/Zone, !- Design Flow Rate Calculation Method
|
|
0.937286742, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0., !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: EXTERIOR:LIGHTS ===========
|
|
|
|
|
|
Exterior:Lights,
|
|
Exterior_Lights_a, !- Name
|
|
Exterior_lighting_schedule_a, !- Schedule Name
|
|
316.3, !- Design Level {W}
|
|
AstronomicalClock, !- Control Option
|
|
General; !- End-Use Subcategory
|
|
|
|
Exterior:Lights,
|
|
Exterior_Lights_b, !- Name
|
|
Exterior_lighting_schedule_b_2016, !- Schedule Name
|
|
3054.9, !- Design Level {W}
|
|
AstronomicalClock, !- Control Option
|
|
General; !- End-Use Subcategory
|
|
|
|
|
|
Schedule:Compact,
|
|
Exterior_lighting_schedule_a, !- Name
|
|
fraction, !- Schedule Type Limits Name
|
|
Through:12/31, !- Field 1
|
|
For:AllDays, !- Field 2
|
|
Until: 06:00,0, !- Field 3
|
|
Until: 24:00,1; !- Field 5
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Exterior_lighting_schedule_b, !- Name
|
|
fraction, !- Schedule Type Limits Name
|
|
Through:12/31, !- Field 1
|
|
For:AllDays, !- Field 2
|
|
Until: 06:00,0.7, !- Field 3
|
|
Until: 24:00,1; !- Field 5
|
|
|
|
Schedule:Compact,
|
|
Exterior_lighting_schedule_a_IECC2015, !- Name
|
|
fraction, !- Schedule Type Limits Name
|
|
Through:12/31, !- Field 1
|
|
For:Weekdays SummerDesignDay, !- Field 2
|
|
Until: 07:00,0, !- Field 3
|
|
Until: 21:00,1, !- Field 5
|
|
Until: 24:00,0, !- Field 7
|
|
For:Saturdays, !- Field 9
|
|
Until: 07:00,0, !- Field 10
|
|
Until: 22:00,1, !- Field 12
|
|
Until: 24:00,0, !- Field 14
|
|
For:AllOtherDays, !- Field 16
|
|
Until: 9:00,0, !- Field 17
|
|
Until: 19:00,1, !- Field 19
|
|
Until: 24:00,0; !- Field 21
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Exterior_lighting_schedule_b_2016, !- Name
|
|
fraction, !- Schedule Type Limits Name
|
|
Through:12/31, !- Field 1
|
|
For:AllDays, !- Field 2
|
|
Until: 06:00,0.5, !- Field 3
|
|
Until: 24:00,1; !- Field 5
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SIZING:PARAMETERS ===========
|
|
|
|
Sizing:Parameters,
|
|
1.2000, !- Heating Sizing Factor
|
|
1.2000, !- Cooling Sizing Factor
|
|
6; !- Timesteps in Averaging Window
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SIZING:ZONE ===========
|
|
|
|
|
|
Sizing:Zone,
|
|
Back_Space, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Back_Space, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
0.0, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
; !- Heating Maximum Air Flow Fraction
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Back_Space, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000609562, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
|
|
|
|
Sizing:Zone,
|
|
Core_Retail, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Core_Retail, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
0.0, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
; !- Heating Maximum Air Flow Fraction
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Core_Retail, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.001181026, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
|
|
|
|
Sizing:Zone,
|
|
Point_Of_Sale, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Point_Of_Sale, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
0.0, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
; !- Heating Maximum Air Flow Fraction
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Point_Of_Sale, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.001181026, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
|
|
|
|
Sizing:Zone,
|
|
Front_Retail, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Front_Retail, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
0.0, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
; !- Heating Maximum Air Flow Fraction
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Front_Retail, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.001181026, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
|
|
|
|
Sizing:Zone,
|
|
Front_Entry, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Front_Entry, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
0.0, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
; !- Heating Maximum Air Flow Fraction
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Front_Entry, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.001181026, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SIZING:SYSTEM ===========
|
|
|
|
Sizing:System,
|
|
PSZ-AC:1, !- AirLoop Name
|
|
Sensible, !- Type of Load to Size On
|
|
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
|
|
1.0000, !- Central Heating Maximum System Air Flow Ratio
|
|
7.0, !- Preheat Design Temperature {C}
|
|
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Precool Design Temperature {C}
|
|
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Central Cooling Design Supply Air Temperature {C}
|
|
40, !- Central Heating Design Supply Air Temperature {C}
|
|
Coincident, !- Sizing Option
|
|
No, !- 100% Outdoor Air in Cooling
|
|
No, !- 100% Outdoor Air in Heating
|
|
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
DesignDay, !- Cooling Supply Air Flow Rate Method
|
|
0.0, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
|
|
DesignDay, !- Heating Supply Air Flow Rate Method
|
|
0.0, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
|
|
ZoneSum, !- System Outdoor Air Method
|
|
1.0, !- Zone Maximum Outdoor Air Fraction
|
|
CoolingDesignCapacity, !- Cooling Design Capacity Method
|
|
autosize, !- Cooling Design Capacity {W}
|
|
, !- Cooling Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Cooling Design Capacity
|
|
HeatingDesignCapacity, !- Heating Design Capacity Method
|
|
autosize, !- Heating Design Capacity {W}
|
|
, !- Heating Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Heating Design Capacity
|
|
OnOff; !- Central Cooling Capacity Control Method
|
|
|
|
Sizing:System,
|
|
PSZ-AC:2, !- AirLoop Name
|
|
Sensible, !- Type of Load to Size On
|
|
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
|
|
1.0000, !- Central Heating Maximum System Air Flow Ratio
|
|
7.0, !- Preheat Design Temperature {C}
|
|
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Precool Design Temperature {C}
|
|
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Central Cooling Design Supply Air Temperature {C}
|
|
40, !- Central Heating Design Supply Air Temperature {C}
|
|
Coincident, !- Sizing Option
|
|
No, !- 100% Outdoor Air in Cooling
|
|
No, !- 100% Outdoor Air in Heating
|
|
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
DesignDay, !- Cooling Supply Air Flow Rate Method
|
|
0.0, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
|
|
DesignDay, !- Heating Supply Air Flow Rate Method
|
|
0.0, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
|
|
ZoneSum, !- System Outdoor Air Method
|
|
1.0, !- Zone Maximum Outdoor Air Fraction
|
|
CoolingDesignCapacity, !- Cooling Design Capacity Method
|
|
autosize, !- Cooling Design Capacity {W}
|
|
, !- Cooling Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Cooling Design Capacity
|
|
HeatingDesignCapacity, !- Heating Design Capacity Method
|
|
autosize, !- Heating Design Capacity {W}
|
|
, !- Heating Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Heating Design Capacity
|
|
OnOff; !- Central Cooling Capacity Control Method
|
|
|
|
Sizing:System,
|
|
PSZ-AC:3, !- AirLoop Name
|
|
Sensible, !- Type of Load to Size On
|
|
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
|
|
1.0000, !- Central Heating Maximum System Air Flow Ratio
|
|
7.0, !- Preheat Design Temperature {C}
|
|
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Precool Design Temperature {C}
|
|
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Central Cooling Design Supply Air Temperature {C}
|
|
40.0, !- Central Heating Design Supply Air Temperature {C}
|
|
Coincident, !- Type of Zone Sum to Use
|
|
No, !- 100% Outdoor Air in Cooling
|
|
No, !- 100% Outdoor Air in Heating
|
|
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
DesignDay, !- Cooling Supply Air Flow Rate Method
|
|
0.0, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
|
|
DesignDay, !- Heating Supply Air Flow Rate Method
|
|
0.0, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
|
|
ZoneSum, !- System Outdoor Air Method
|
|
1.0, !- Zone Maximum Outdoor Air Fraction
|
|
CoolingDesignCapacity, !- Cooling Design Capacity Method
|
|
autosize, !- Cooling Design Capacity {W}
|
|
, !- Cooling Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Cooling Design Capacity
|
|
HeatingDesignCapacity, !- Heating Design Capacity Method
|
|
autosize, !- Heating Design Capacity {W}
|
|
, !- Heating Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Heating Design Capacity
|
|
OnOff; !- Central Cooling Capacity Control Method
|
|
|
|
Sizing:System,
|
|
PSZ-AC:4, !- AirLoop Name
|
|
Sensible, !- Type of Load to Size On
|
|
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
|
|
1.0000, !- Central Heating Maximum System Air Flow Ratio
|
|
7.0, !- Preheat Design Temperature {C}
|
|
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Precool Design Temperature {C}
|
|
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Central Cooling Design Supply Air Temperature {C}
|
|
40.0, !- Central Heating Design Supply Air Temperature {C}
|
|
Coincident, !- Type of Zone Sum to Use
|
|
No, !- 100% Outdoor Air in Cooling
|
|
No, !- 100% Outdoor Air in Heating
|
|
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
DesignDay, !- Cooling Supply Air Flow Rate Method
|
|
0.0, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
|
|
DesignDay, !- Heating Supply Air Flow Rate Method
|
|
0.0, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
|
|
ZoneSum, !- System Outdoor Air Method
|
|
1.0, !- Zone Maximum Outdoor Air Fraction
|
|
CoolingDesignCapacity, !- Cooling Design Capacity Method
|
|
autosize, !- Cooling Design Capacity {W}
|
|
, !- Cooling Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Cooling Design Capacity
|
|
HeatingDesignCapacity, !- Heating Design Capacity Method
|
|
autosize, !- Heating Design Capacity {W}
|
|
, !- Heating Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Heating Design Capacity
|
|
OnOff; !- Central Cooling Capacity Control Method
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ZONECONTROL:THERMOSTAT ===========
|
|
|
|
ZoneControl:Thermostat,
|
|
Back_Space Thermostat, !- Name
|
|
Back_Space, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Back_Space DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Core_Retail Thermostat, !- Name
|
|
Core_Retail, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Core_Retail DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Point_Of_Sale Thermostat,!- Name
|
|
Point_Of_Sale, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Point_Of_Sale DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Front_Retail Thermostat, !- Name
|
|
Front_Retail, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Front_Retail DualSPSched;!- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Front_Entry Thermostat, !- Name
|
|
Front_Entry, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Front_Entry DualSPSched; !- Control 1 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: THERMOSTATSETPOINT:DUALSETPOINT ===========
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Back_Space DualSPSched, !- Name
|
|
HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH_NO_SETBACK; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Core_Retail DualSPSched, !- Name
|
|
HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Point_Of_Sale DualSPSched, !- Name
|
|
HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH_NO_SETBACK; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Front_Retail DualSPSched,!- Name
|
|
HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH_NO_SETBACK; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Front_Entry DualSPSched, !- Name
|
|
HTGSETP_SCH_FrontEntry_STD2013, !- Heating Setpoint Temperature Schedule Name
|
|
FRONT_ENTRY_COOLING; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ZONEHVAC:UNITHEATER ===========
|
|
|
|
ZoneHVAC:UnitHeater,
|
|
Front_Entry Unit Heater, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Front_Entry Unit Heater Exhaust Node, !- Air Inlet Node Name
|
|
Front_Entry Unit Heater Inlet Node Name, !- Air Outlet Node Name
|
|
Fan:ConstantVolume, !- Supply Air Fan Object Type
|
|
Front_Entry Unit HeaterFan, !- Supply Air Fan Name
|
|
AUTOSIZE, !- Maximum Supply Air Flow Rate {m3/s}
|
|
Coil:Heating:Fuel, !- Heating Coil Object Type
|
|
Front_Entry Unit Heater Coil, !- Heating Coil Name
|
|
, !- Supply Air Fan Operating Mode Schedule Name
|
|
No, !- Supply Air Fan Operation During No Heating
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
0.001, !- Heating Convergence Tolerance
|
|
; !- Availability Manager List Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AIRTERMINAL:SINGLEDUCT:UNCONTROLLED ===========
|
|
|
|
AirTerminal:SingleDuct:Uncontrolled,
|
|
Back_Space Direct Air, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Back_Space Direct Air Inlet Node Name, !- Zone Supply Air Node Name
|
|
AUTOSIZE; !- Maximum Air Flow Rate {m3/s}
|
|
|
|
AirTerminal:SingleDuct:Uncontrolled,
|
|
Core_Retail Direct Air, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Core_Retail Direct Air Inlet Node Name, !- Zone Supply Air Node Name
|
|
AUTOSIZE; !- Maximum Air Flow Rate {m3/s}
|
|
|
|
AirTerminal:SingleDuct:Uncontrolled,
|
|
Point_Of_Sale Direct Air,!- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Point_Of_Sale Direct Air Inlet Node Name, !- Zone Supply Air Node Name
|
|
AUTOSIZE; !- Maximum Air Flow Rate {m3/s}
|
|
|
|
AirTerminal:SingleDuct:Uncontrolled,
|
|
Front_Retail Direct Air, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Front_Retail Direct Air Inlet Node Name, !- Zone Supply Air Node Name
|
|
AUTOSIZE; !- Maximum Air Flow Rate {m3/s}
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ZONEHVAC:EQUIPMENTLIST ===========
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Back_Space Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
|
|
Back_Space Direct Air, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Core_Retail Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
|
|
Core_Retail Direct Air, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Point_Of_Sale Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
|
|
Point_Of_Sale Direct Air,!- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Front_Retail Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
|
|
Front_Retail Direct Air, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Front_Entry Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:UnitHeater, !- Zone Equipment 1 Object Type
|
|
Front_Entry Unit Heater, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ZONEHVAC:EQUIPMENTCONNECTIONS ===========
|
|
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Back_Space, !- Zone Name
|
|
Back_Space Equipment, !- Zone Conditioning Equipment List Name
|
|
Back_Space Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Back_Space Air Node, !- Zone Air Node Name
|
|
Back_Space Return Air Node Name; !- !- Zone Return Air Node or NodeList Name
|
|
|
|
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Core_Retail, !- Zone Name
|
|
Core_Retail Equipment, !- Zone Conditioning Equipment List Name
|
|
Core_Retail Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Core_Retail Air Node, !- Zone Air Node Name
|
|
Core_Retail Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Point_Of_Sale, !- Zone Name
|
|
Point_Of_Sale Equipment, !- Zone Conditioning Equipment List Name
|
|
Point_Of_Sale Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Point_Of_Sale Air Node, !- Zone Air Node Name
|
|
Point_Of_Sale Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Front_Retail, !- Zone Name
|
|
Front_Retail Equipment, !- Zone Conditioning Equipment List Name
|
|
Front_Retail Inlet Nodes,!- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Front_Retail Air Node, !- Zone Air Node Name
|
|
Front_Retail Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Front_Entry, !- Zone Name
|
|
Front_Entry Equipment, !- Zone Conditioning Equipment List Name
|
|
Front_Entry Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
Front_Entry Exhaust Nodes, !- Zone Air Exhaust Node or NodeList Name
|
|
Front_Entry Air Node, !- Zone Air Node Name
|
|
Front_Entry Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: FAN:CONSTANTVOLUME ===========
|
|
|
|
Fan:ConstantVolume,
|
|
Front_Entry Unit HeaterFan, !- Name
|
|
FrontEntry_FanSched, !- Availability Schedule Name
|
|
0.58175, !- Fan Total Efficiency
|
|
622.5, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
0.895, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
Front_Entry Unit Heater Exhaust Node, !- Air Inlet Node Name
|
|
Front_Entry Unit Heater Post Fan Node, !- Air Outlet Node Name
|
|
General; !- End-Use Subcategory
|
|
|
|
!- =========== FANs ===========
|
|
|
|
Fan:SystemModel,
|
|
PSZ-AC:1_addAQ_Unitary_Package_fan, !- Name
|
|
HVACOperationSchd, !- Availability Schedule Name
|
|
PSZ-AC:1_OA-PSZ-AC:1_Unitary_PackageNode, !- Air Inlet Node Name
|
|
PSZ-AC:1_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name
|
|
AUTOSIZE, !- Design Maximum Air Flow Rate
|
|
Discrete, !- Speed Control Method
|
|
1, !- Electric Power Minimum Flow Rate Fraction
|
|
622.5, !- Design Pressure Rise {Pa}
|
|
0.895, !- Motor Efficiency
|
|
1.0, ! Motor In Air Stream Fraction
|
|
AUTOSIZE, !- Design Electric Power Consumption
|
|
TotalEfficiencyAndPressure, !- Design Power Sizing Method
|
|
, !- Electric Power Per Unit Flow Rate
|
|
, !- Electric Power Per Unit Flow Rate Per Pressure
|
|
0.58175, !- Fan Total Efficiency
|
|
, !- Electric Power Function of Flow Fraction Curve Name
|
|
622.5, !- Night Ventilation Mode Pressure Rise
|
|
, !- Night Ventilation Mode Flow Fraction
|
|
, !- Motor Loss Zone Name
|
|
, !- Motor Loss Radiative Fraction
|
|
General, !- End-Use Subcategory
|
|
2, !- Number of Speeds
|
|
0.66, !- Speed Flow Fraction
|
|
0.4, !- Electric Power Fraction
|
|
1, !- Speed Flow Fraction
|
|
1; !- Electric Power Fraction
|
|
|
|
Fan:SystemModel,
|
|
PSZ-AC:2_addAQ_Unitary_Package_fan, !- Name
|
|
HVACOperationSchd, !- Availability Schedule Name
|
|
PSZ-AC:2_OA-PSZ-AC:2_Unitary_PackageNode, !- Air Inlet Node Name
|
|
PSZ-AC:2_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name
|
|
AUTOSIZE, !- Design Maximum Air Flow Rate
|
|
Discrete, !- Speed Control Method
|
|
1, !- Electric Power Minimum Flow Rate Fraction
|
|
1018.41, !- Design Pressure Rise {Pa}
|
|
0.93, !- Motor Efficiency
|
|
1.0, ! Motor In Air Stream Fraction
|
|
AUTOSIZE, !- Design Electric Power Consumption
|
|
TotalEfficiencyAndPressure, !- Design Power Sizing Method
|
|
, !- Electric Power Per Unit Flow Rate
|
|
, !- Electric Power Per Unit Flow Rate Per Pressure
|
|
0.6045, !- Fan Total Efficiency
|
|
, !- Electric Power Function of Flow Fraction Curve Name
|
|
1018.41, !- Night Ventilation Mode Pressure Rise
|
|
, !- Night Ventilation Mode Flow Fraction
|
|
, !- Motor Loss Zone Name
|
|
, !- Motor Loss Radiative Fraction
|
|
General, !- End-Use Subcategory
|
|
2, !- Number of Speeds
|
|
0.66, !- Speed Flow Fraction
|
|
0.4, !- Electric Power Fraction
|
|
1, !- Speed Flow Fraction
|
|
1; !- Electric Power Fraction
|
|
|
|
Fan:SystemModel,
|
|
PSZ-AC:3_addAQ_Unitary_Package_fan, !- Name
|
|
HVACOperationSchd, !- Availability Schedule Name
|
|
PSZ-AC:3_OA-PSZ-AC:3_Unitary_PackageNode, !- Air Inlet Node Name
|
|
PSZ-AC:3_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name
|
|
AUTOSIZE, !- Design Maximum Air Flow Rate
|
|
Discrete, !- Speed Control Method
|
|
1, !- Electric Power Minimum Flow Rate Fraction
|
|
622.5, !- Design Pressure Rise {Pa}
|
|
0.865, !- Motor Efficiency
|
|
1.0, ! Motor In Air Stream Fraction
|
|
AUTOSIZE, !- Design Electric Power Consumption
|
|
TotalEfficiencyAndPressure, !- Design Power Sizing Method
|
|
, !- Electric Power Per Unit Flow Rate
|
|
, !- Electric Power Per Unit Flow Rate Per Pressure
|
|
0.56225, !- Fan Total Efficiency
|
|
, !- Electric Power Function of Flow Fraction Curve Name
|
|
622.5, !- Night Ventilation Mode Pressure Rise
|
|
, !- Night Ventilation Mode Flow Fraction
|
|
, !- Motor Loss Zone Name
|
|
, !- Motor Loss Radiative Fraction
|
|
General, !- End-Use Subcategory
|
|
2, !- Number of Speeds
|
|
0.66, !- Speed Flow Fraction
|
|
0.4, !- Electric Power Fraction
|
|
1, !- Speed Flow Fraction
|
|
1; !- Electric Power Fraction
|
|
|
|
Fan:SystemModel,
|
|
PSZ-AC:4_addAQ_Unitary_Package_fan, !- Name
|
|
HVACOperationSchd, !- Availability Schedule Name
|
|
PSZ-AC:4_OA-PSZ-AC:4_Unitary_PackageNode, !- Air Inlet Node Name
|
|
PSZ-AC:4_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name
|
|
AUTOSIZE, !- Design Maximum Air Flow Rate
|
|
Discrete, !- Speed Control Method
|
|
1, !- Electric Power Minimum Flow Rate Fraction
|
|
622.5, !- Design Pressure Rise {Pa}
|
|
0.865, !- Motor Efficiency
|
|
1.0, ! Motor In Air Stream Fraction
|
|
AUTOSIZE, !- Design Electric Power Consumption
|
|
TotalEfficiencyAndPressure, !- Design Power Sizing Method
|
|
, !- Electric Power Per Unit Flow Rate
|
|
, !- Electric Power Per Unit Flow Rate Per Pressure
|
|
0.56225, !- Fan Total Efficiency
|
|
, !- Electric Power Function of Flow Fraction Curve Name
|
|
622.5, !- Night Ventilation Mode Pressure Rise
|
|
, !- Night Ventilation Mode Flow Fraction
|
|
, !- Motor Loss Zone Name
|
|
, !- Motor Loss Radiative Fraction
|
|
General, !- End-Use Subcategory
|
|
1, !- Number of Speeds
|
|
1, !- Speed Flow Fraction
|
|
1; !- Electric Power Fraction
|
|
|
|
!- =========== COIL:COOLING:DX ===========
|
|
|
|
Coil:Cooling:DX:MultiSpeed,
|
|
PSZ-AC:1_Unitary_Package_CoolCoil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PSZ-AC:1_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name
|
|
PSZ-AC:1 Supply Equipment Outlet Node, !- Air Outlet Node Name
|
|
, !- Condenser Air Inlet Node Name
|
|
AirCooled, !- Condenser Type
|
|
, !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C}
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Condensate Collection Water Storage Tank Name
|
|
No, !- Apply Part Load Fraction to Speeds Greater than 1
|
|
No, !- Apply Latent Degradation to Speeds Greater than 1
|
|
, !- Crankcase Heater Capacity {W}
|
|
10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C}
|
|
, !- Basin Heater Capacity {W/K}
|
|
2, !- Basin Heater Setpoint Temperature {C}
|
|
, !- Basin Heater Operating Schedule Name
|
|
Electricity, !- Fuel Type
|
|
2, !- Number of Speeds
|
|
16784.54, !- Speed 1 Gross Rated Total Cooling Capacity {W}
|
|
0.73527, !- Speed 1 Gross Rated Sensible Heat Ratio
|
|
3.7988306741603, !- Speed 1 Gross Rated Cooling COP {W/W}
|
|
1.11884666666667, !- Speed 1 Rated Air Flow Rate {m3/s}
|
|
0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
|
|
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 1 Total Cooling Capacity Function of Temperature Curve Name
|
|
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 1 Total Cooling Capacity Function of Flow Fraction Curve Name
|
|
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 1 Energy Input Ratio Function of Temperature Curve Name
|
|
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 1 Energy Input Ratio Function of Flow Fraction Curve Name
|
|
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 1 Part Load Fraction Correlation Curve Name
|
|
, !- Speed 1 Nominal Time for Condensate Removal to Begin {s}
|
|
, !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless}
|
|
, !- Speed 1 Maximum Cycling Rate {cycles/hr}
|
|
, !- Speed 1 Latent Capacity Time Constant {s}
|
|
0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless}
|
|
, !- Speed 1 Waste Heat Function of Temperature Curve Name
|
|
0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless}
|
|
, !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s}
|
|
, !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W}
|
|
33569.08, !- Speed 2 Gross Rated Total Cooling Capacity {W}
|
|
0.73527, !- Speed 2 Gross Rated Sensible Heat Ratio
|
|
3.7988306741603, !- Speed 2 Gross Rated Cooling COP {W/W}
|
|
1.67827, !- Speed 2 Rated Air Flow Rate {m3/s}
|
|
0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
|
|
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 2 Total Cooling Capacity Function of Temperature Curve Name
|
|
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 2 Total Cooling Capacity Function of Flow Fraction Curve Name
|
|
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 2 Energy Input Ratio Function of Temperature Curve Name
|
|
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 2 Energy Input Ratio Function of Flow Fraction Curve Name
|
|
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 2 Part Load Fraction Correlation Curve Name
|
|
, !- Speed 2 Nominal Time for Condensate Removal to Begin {s}
|
|
, !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless}
|
|
, !- Speed 2 Maximum Cycling Rate {cycles/hr}
|
|
, !- Speed 2 Latent Capacity Time Constant {s}
|
|
0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless}
|
|
, !- Speed 2 Waste Heat Function of Temperature Curve Name
|
|
0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless}
|
|
, !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s}
|
|
; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W}
|
|
|
|
Coil:Cooling:DX:MultiSpeed,
|
|
PSZ-AC:2_Unitary_Package_CoolCoil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PSZ-AC:2_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name
|
|
PSZ-AC:2 Supply Equipment Outlet Node, !- Air Outlet Node Name
|
|
, !- Condenser Air Inlet Node Name
|
|
AirCooled, !- Condenser Type
|
|
, !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C}
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Condensate Collection Water Storage Tank Name
|
|
No, !- Apply Part Load Fraction to Speeds Greater than 1
|
|
No, !- Apply Latent Degradation to Speeds Greater than 1
|
|
, !- Crankcase Heater Capacity {W}
|
|
10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C}
|
|
, !- Basin Heater Capacity {W/K}
|
|
2, !- Basin Heater Setpoint Temperature {C}
|
|
, !- Basin Heater Operating Schedule Name
|
|
Electricity, !- Fuel Type
|
|
2, !- Number of Speeds
|
|
82179.45, !- Speed 1 Gross Rated Total Cooling Capacity {W}
|
|
0.68911, !- Speed 1 Gross Rated Sensible Heat Ratio
|
|
3.39928881549157, !- Speed 1 Gross Rated Cooling COP {W/W}
|
|
4.64711333333333, !- Speed 1 Rated Air Flow Rate {m3/s}
|
|
0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
|
|
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 1 Total Cooling Capacity Function of Temperature Curve Name
|
|
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 1 Total Cooling Capacity Function of Flow Fraction Curve Name
|
|
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 1 Energy Input Ratio Function of Temperature Curve Name
|
|
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 1 Energy Input Ratio Function of Flow Fraction Curve Name
|
|
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 1 Part Load Fraction Correlation Curve Name
|
|
, !- Speed 1 Nominal Time for Condensate Removal to Begin {s}
|
|
, !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless}
|
|
, !- Speed 1 Maximum Cycling Rate {cycles/hr}
|
|
, !- Speed 1 Latent Capacity Time Constant {s}
|
|
0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless}
|
|
, !- Speed 1 Waste Heat Function of Temperature Curve Name
|
|
0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless}
|
|
, !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s}
|
|
, !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W}
|
|
164358.90, !- Speed 2 Gross Rated Total Cooling Capacity {W}
|
|
0.68911, !- Speed 2 Gross Rated Sensible Heat Ratio
|
|
3.39928881549157, !- Speed 2 Gross Rated Cooling COP {W/W}
|
|
6.97067, !- Speed 2 Rated Air Flow Rate {m3/s}
|
|
0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
|
|
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 2 Total Cooling Capacity Function of Temperature Curve Name
|
|
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 2 Total Cooling Capacity Function of Flow Fraction Curve Name
|
|
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 2 Energy Input Ratio Function of Temperature Curve Name
|
|
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 2 Energy Input Ratio Function of Flow Fraction Curve Name
|
|
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 2 Part Load Fraction Correlation Curve Name
|
|
, !- Speed 2 Nominal Time for Condensate Removal to Begin {s}
|
|
, !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless}
|
|
, !- Speed 2 Maximum Cycling Rate {cycles/hr}
|
|
, !- Speed 2 Latent Capacity Time Constant {s}
|
|
0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless}
|
|
, !- Speed 2 Waste Heat Function of Temperature Curve Name
|
|
0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless}
|
|
, !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s}
|
|
; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W}
|
|
|
|
Coil:Cooling:DX:MultiSpeed,
|
|
PSZ-AC:3_Unitary_Package_CoolCoil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PSZ-AC:3_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name
|
|
PSZ-AC:3 Supply Equipment Outlet Node, !- Air Outlet Node Name
|
|
, !- Condenser Air Inlet Node Name
|
|
AirCooled, !- Condenser Type
|
|
, !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C}
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Condensate Collection Water Storage Tank Name
|
|
No, !- Apply Part Load Fraction to Speeds Greater than 1
|
|
No, !- Apply Latent Degradation to Speeds Greater than 1
|
|
, !- Crankcase Heater Capacity {W}
|
|
10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C}
|
|
, !- Basin Heater Capacity {W/K}
|
|
2, !- Basin Heater Setpoint Temperature {C}
|
|
, !- Basin Heater Operating Schedule Name
|
|
Electricity, !- Fuel Type
|
|
2, !- Number of Speeds
|
|
10521.53, !- Speed 1 Gross Rated Total Cooling Capacity {W}
|
|
0.72895, !- Speed 1 Gross Rated Sensible Heat Ratio
|
|
3.7988306741603, !- Speed 1 Gross Rated Cooling COP {W/W}
|
|
0.686806666666667, !- Speed 1 Rated Air Flow Rate {m3/s}
|
|
0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
|
|
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 1 Total Cooling Capacity Function of Temperature Curve Name
|
|
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 1 Total Cooling Capacity Function of Flow Fraction Curve Name
|
|
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 1 Energy Input Ratio Function of Temperature Curve Name
|
|
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 1 Energy Input Ratio Function of Flow Fraction Curve Name
|
|
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 1 Part Load Fraction Correlation Curve Name
|
|
, !- Speed 1 Nominal Time for Condensate Removal to Begin {s}
|
|
, !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless}
|
|
, !- Speed 1 Maximum Cycling Rate {cycles/hr}
|
|
, !- Speed 1 Latent Capacity Time Constant {s}
|
|
0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless}
|
|
, !- Speed 1 Waste Heat Function of Temperature Curve Name
|
|
0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless}
|
|
, !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s}
|
|
, !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W}
|
|
21043.06, !- Speed 2 Gross Rated Total Cooling Capacity {W}
|
|
0.72895, !- Speed 2 Gross Rated Sensible Heat Ratio
|
|
3.7988306741603, !- Speed 2 Gross Rated Cooling COP {W/W}
|
|
1.03021, !- Speed 2 Rated Air Flow Rate {m3/s}
|
|
0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
|
|
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 2 Total Cooling Capacity Function of Temperature Curve Name
|
|
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 2 Total Cooling Capacity Function of Flow Fraction Curve Name
|
|
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 2 Energy Input Ratio Function of Temperature Curve Name
|
|
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 2 Energy Input Ratio Function of Flow Fraction Curve Name
|
|
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 2 Part Load Fraction Correlation Curve Name
|
|
, !- Speed 2 Nominal Time for Condensate Removal to Begin {s}
|
|
, !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless}
|
|
, !- Speed 2 Maximum Cycling Rate {cycles/hr}
|
|
, !- Speed 2 Latent Capacity Time Constant {s}
|
|
0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless}
|
|
, !- Speed 2 Waste Heat Function of Temperature Curve Name
|
|
0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless}
|
|
, !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s}
|
|
; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W}
|
|
|
|
Coil:Cooling:DX:MultiSpeed,
|
|
PSZ-AC:4_Unitary_Package_CoolCoil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PSZ-AC:4_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name
|
|
PSZ-AC:4 Supply Equipment Outlet Node, !- Air Outlet Node Name
|
|
, !- Condenser Air Inlet Node Name
|
|
AirCooled, !- Condenser Type
|
|
, !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C}
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Condensate Collection Water Storage Tank Name
|
|
No, !- Apply Part Load Fraction to Speeds Greater than 1
|
|
No, !- Apply Latent Degradation to Speeds Greater than 1
|
|
, !- Crankcase Heater Capacity {W}
|
|
10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C}
|
|
, !- Basin Heater Capacity {W/K}
|
|
2, !- Basin Heater Setpoint Temperature {C}
|
|
, !- Basin Heater Operating Schedule Name
|
|
Electricity, !- Fuel Type
|
|
2, !- Number of Speeds
|
|
8309.7, !- Speed 1 Gross Rated Total Cooling Capacity {W}
|
|
0.70693, !- Speed 1 Gross Rated Sensible Heat Ratio
|
|
4.11713235489972, !- Speed 1 Gross Rated Cooling COP {W/W}
|
|
0.502326666666667, !- Speed 1 Rated Air Flow Rate {m3/s}
|
|
0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
|
|
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 1 Total Cooling Capacity Function of Temperature Curve Name
|
|
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 1 Total Cooling Capacity Function of Flow Fraction Curve Name
|
|
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 1 Energy Input Ratio Function of Temperature Curve Name
|
|
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 1 Energy Input Ratio Function of Flow Fraction Curve Name
|
|
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 1 Part Load Fraction Correlation Curve Name
|
|
, !- Speed 1 Nominal Time for Condensate Removal to Begin {s}
|
|
, !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless}
|
|
, !- Speed 1 Maximum Cycling Rate {cycles/hr}
|
|
, !- Speed 1 Latent Capacity Time Constant {s}
|
|
0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless}
|
|
, !- Speed 1 Waste Heat Function of Temperature Curve Name
|
|
0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless}
|
|
, !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s}
|
|
, !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W}
|
|
16619.40, !- Speed 2 Gross Rated Total Cooling Capacity {W}
|
|
0.70693, !- Speed 2 Gross Rated Sensible Heat Ratio
|
|
4.11713235489972, !- Speed 2 Gross Rated Cooling COP {W/W}
|
|
0.75349, !- Speed 2 Rated Air Flow Rate {m3/s}
|
|
0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
|
|
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 2 Total Cooling Capacity Function of Temperature Curve Name
|
|
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 2 Total Cooling Capacity Function of Flow Fraction Curve Name
|
|
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 2 Energy Input Ratio Function of Temperature Curve Name
|
|
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 2 Energy Input Ratio Function of Flow Fraction Curve Name
|
|
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 2 Part Load Fraction Correlation Curve Name
|
|
, !- Speed 2 Nominal Time for Condensate Removal to Begin {s}
|
|
, !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless}
|
|
, !- Speed 2 Maximum Cycling Rate {cycles/hr}
|
|
, !- Speed 2 Latent Capacity Time Constant {s}
|
|
0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless}
|
|
, !- Speed 2 Waste Heat Function of Temperature Curve Name
|
|
0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless}
|
|
, !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s}
|
|
; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W}
|
|
|
|
Coil:Heating:Fuel,
|
|
PSZ-AC:1_Unitary_Package_HeatCoil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
NaturalGas, !- Fuel Type
|
|
0.81, !- Burner Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
PSZ-AC:1_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name
|
|
PSZ-AC:1_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name
|
|
; !- Temperature Setpoint Node Name
|
|
|
|
Coil:Heating:Fuel,
|
|
PSZ-AC:2_Unitary_Package_HeatCoil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
NaturalGas, !- Fuel Type
|
|
0.8, !- Burner Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
PSZ-AC:2_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name
|
|
PSZ-AC:2_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name
|
|
; !- Temperature Setpoint Node Name
|
|
|
|
Coil:Heating:Fuel,
|
|
PSZ-AC:3_Unitary_Package_HeatCoil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
NaturalGas, !- Fuel Type
|
|
0.81, !- Burner Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
PSZ-AC:3_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name
|
|
PSZ-AC:3_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name
|
|
; !- Temperature Setpoint Node Name
|
|
|
|
Coil:Heating:Fuel,
|
|
PSZ-AC:4_Unitary_Package_HeatCoil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
NaturalGas, !- Fuel Type
|
|
0.81, !- Burner Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
PSZ-AC:4_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name
|
|
PSZ-AC:4_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name
|
|
; !- Temperature Setpoint Node Name
|
|
|
|
Coil:Heating:Fuel,
|
|
Front_Entry Unit Heater coil, !- Name
|
|
FrontEntry_CoilSched, !- Availability Schedule Name
|
|
NaturalGas, !- Fuel Type
|
|
0.81, !- Burner Efficiency
|
|
autosize, !- Nominal Capacity {W}
|
|
Front_Entry Unit Heater Post Fan Node, !- Air Inlet Node Name
|
|
Front_Entry Unit Heater Inlet Node Name, !- Air Outlet Node Name
|
|
, !- Temperature Setpoint Node Name
|
|
0.0, !- Parasitic Electric Load {W}
|
|
, !- Part Load Fraction Correlation Curve Name
|
|
0; !- Parasitic Fuel Load {W}
|
|
|
|
!- =========== AIRLOOPHVAC ===========
|
|
|
|
AirLoopHVAC:UnitarySystem,
|
|
PSZ-AC:1_Unitary_Package_DX, !- Name
|
|
Load, !- Control Type
|
|
Back_Space, !- Controlling Zone or Thermostat Location
|
|
None, !- Dehumidification Control Type
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PSZ-AC:1_OA-PSZ-AC:1_Unitary_PackageNode, !- Air Inlet Node Name
|
|
PSZ-AC:1 Supply Equipment Outlet Node, !- Air Outlet Node Name
|
|
Fan:SystemModel, !- Supply Fan Object Type
|
|
PSZ-AC:1_addAQ_Unitary_Package_fan, !- Supply Fan Name
|
|
BlowThrough, !- Fan Placement
|
|
HVACOperationSchd, !- Supply Air Fan Operating Mode Schedule Name
|
|
Coil:Heating:Fuel, !- Heating Coil Object Type
|
|
PSZ-AC:1_Unitary_Package_HeatCoil, !- Heating Coil Name
|
|
1, !- DX Heating Coil Sizing Ratio
|
|
Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type
|
|
PSZ-AC:1_Unitary_Package_CoolCoil, !- Cooling Coil Name
|
|
No, !- Use DOAS DX Cooling Coil
|
|
2, !- Minimum Supply Air Temperature {C}
|
|
SensibleOnlyLoadControl, !- Latent Load Control
|
|
, !- Supplemental Heating Coil Object Type
|
|
, !- Supplemental Heating Coil Name
|
|
SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method
|
|
AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
|
|
SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method
|
|
AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
|
|
SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method
|
|
AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s}
|
|
, !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- No Load Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- No Load Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W}
|
|
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W}
|
|
AUTOSIZE, !- Maximum Supply Air Temperature {C}
|
|
, !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C}
|
|
, !- Outdoor Dry-Bulb Temperature Sensor Node Name
|
|
, !- Maximum Cycling Rate {cycles/hr}
|
|
, !- Heat Pump Time Constant {s}
|
|
, !- Fraction of On-Cycle Power Use
|
|
, !- Heat Pump Fan Delay Time {s}
|
|
, !- Ancillary On-Cycle Electric Power {W}
|
|
, !- Ancillary Off-Cycle Electric Power {W}
|
|
, !- Design Heat Recovery Water Flow Rate {m3/s}
|
|
, !- Maximum Temperature for Heat Recovery {C}
|
|
, !- Heat Recovery Water Inlet Node Name
|
|
, !- Heat Recovery Water Outlet Node Name
|
|
UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type
|
|
PSZ-AC:1_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name
|
|
|
|
UnitarySystemPerformance:Multispeed,
|
|
PSZ-AC:1_Unitary_Package_DX_Perf, !- Name
|
|
2, !- Number of Speeds for Heating
|
|
2, !- Number of Speeds for Cooling
|
|
No, !- Single Mode Operation
|
|
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
|
|
1, !- Heating Speed 1 Supply Air Flow Ratio
|
|
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
|
|
1, !- Heating Speed 2 Supply Air Flow Ratio
|
|
1; !- Cooling Speed 2 Supply Air Flow Ratio
|
|
|
|
AirLoopHVAC:UnitarySystem,
|
|
PSZ-AC:2_Unitary_Package_DX, !- Name
|
|
Load, !- Control Type
|
|
Core_Retail, !- Controlling Zone or Thermostat Location
|
|
None, !- Dehumidification Control Type
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PSZ-AC:2_OA-PSZ-AC:2_Unitary_PackageNode, !- Air Inlet Node Name
|
|
PSZ-AC:2 Supply Equipment Outlet Node, !- Air Outlet Node Name
|
|
Fan:SystemModel, !- Supply Fan Object Type
|
|
PSZ-AC:2_addAQ_Unitary_Package_fan, !- Supply Fan Name
|
|
BlowThrough, !- Fan Placement
|
|
HVACOperationSchd, !- Supply Air Fan Operating Mode Schedule Name
|
|
Coil:Heating:Fuel, !- Heating Coil Object Type
|
|
PSZ-AC:2_Unitary_Package_HeatCoil, !- Heating Coil Name
|
|
1, !- DX Heating Coil Sizing Ratio
|
|
Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type
|
|
PSZ-AC:2_Unitary_Package_CoolCoil, !- Cooling Coil Name
|
|
No, !- Use DOAS DX Cooling Coil
|
|
2, !- Minimum Supply Air Temperature {C}
|
|
SensibleOnlyLoadControl, !- Latent Load Control
|
|
, !- Supplemental Heating Coil Object Type
|
|
, !- Supplemental Heating Coil Name
|
|
SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method
|
|
AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
|
|
SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method
|
|
AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
|
|
SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method
|
|
AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s}
|
|
, !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- No Load Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- No Load Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W}
|
|
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W}
|
|
AUTOSIZE, !- Maximum Supply Air Temperature {C}
|
|
, !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C}
|
|
, !- Outdoor Dry-Bulb Temperature Sensor Node Name
|
|
, !- Maximum Cycling Rate {cycles/hr}
|
|
, !- Heat Pump Time Constant {s}
|
|
, !- Fraction of On-Cycle Power Use
|
|
, !- Heat Pump Fan Delay Time {s}
|
|
, !- Ancillary On-Cycle Electric Power {W}
|
|
, !- Ancillary Off-Cycle Electric Power {W}
|
|
, !- Design Heat Recovery Water Flow Rate {m3/s}
|
|
, !- Maximum Temperature for Heat Recovery {C}
|
|
, !- Heat Recovery Water Inlet Node Name
|
|
, !- Heat Recovery Water Outlet Node Name
|
|
UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type
|
|
PSZ-AC:2_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name
|
|
|
|
UnitarySystemPerformance:Multispeed,
|
|
PSZ-AC:2_Unitary_Package_DX_Perf, !- Name
|
|
2, !- Number of Speeds for Heating
|
|
2, !- Number of Speeds for Cooling
|
|
No, !- Single Mode Operation
|
|
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
|
|
1, !- Heating Speed 1 Supply Air Flow Ratio
|
|
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
|
|
1, !- Heating Speed 2 Supply Air Flow Ratio
|
|
1; !- Cooling Speed 2 Supply Air Flow Ratio
|
|
|
|
AirLoopHVAC:UnitarySystem,
|
|
PSZ-AC:3_Unitary_Package_DX, !- Name
|
|
Load, !- Control Type
|
|
Point_Of_Sale, !- Controlling Zone or Thermostat Location
|
|
None, !- Dehumidification Control Type
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PSZ-AC:3_OA-PSZ-AC:3_Unitary_PackageNode, !- Air Inlet Node Name
|
|
PSZ-AC:3 Supply Equipment Outlet Node, !- Air Outlet Node Name
|
|
Fan:SystemModel, !- Supply Fan Object Type
|
|
PSZ-AC:3_addAQ_Unitary_Package_fan, !- Supply Fan Name
|
|
BlowThrough, !- Fan Placement
|
|
HVACOperationSchd, !- Supply Air Fan Operating Mode Schedule Name
|
|
Coil:Heating:Fuel, !- Heating Coil Object Type
|
|
PSZ-AC:3_Unitary_Package_HeatCoil, !- Heating Coil Name
|
|
1, !- DX Heating Coil Sizing Ratio
|
|
Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type
|
|
PSZ-AC:3_Unitary_Package_CoolCoil, !- Cooling Coil Name
|
|
No, !- Use DOAS DX Cooling Coil
|
|
2, !- Minimum Supply Air Temperature {C}
|
|
SensibleOnlyLoadControl, !- Latent Load Control
|
|
, !- Supplemental Heating Coil Object Type
|
|
, !- Supplemental Heating Coil Name
|
|
SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method
|
|
AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
|
|
SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method
|
|
AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
|
|
SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method
|
|
AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s}
|
|
, !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- No Load Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- No Load Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W}
|
|
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W}
|
|
AUTOSIZE, !- Maximum Supply Air Temperature {C}
|
|
, !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C}
|
|
, !- Outdoor Dry-Bulb Temperature Sensor Node Name
|
|
, !- Maximum Cycling Rate {cycles/hr}
|
|
, !- Heat Pump Time Constant {s}
|
|
, !- Fraction of On-Cycle Power Use
|
|
, !- Heat Pump Fan Delay Time {s}
|
|
, !- Ancillary On-Cycle Electric Power {W}
|
|
, !- Ancillary Off-Cycle Electric Power {W}
|
|
, !- Design Heat Recovery Water Flow Rate {m3/s}
|
|
, !- Maximum Temperature for Heat Recovery {C}
|
|
, !- Heat Recovery Water Inlet Node Name
|
|
, !- Heat Recovery Water Outlet Node Name
|
|
UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type
|
|
PSZ-AC:3_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name
|
|
|
|
UnitarySystemPerformance:Multispeed,
|
|
PSZ-AC:3_Unitary_Package_DX_Perf, !- Name
|
|
2, !- Number of Speeds for Heating
|
|
2, !- Number of Speeds for Cooling
|
|
No, !- Single Mode Operation
|
|
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
|
|
1, !- Heating Speed 1 Supply Air Flow Ratio
|
|
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
|
|
1, !- Heating Speed 2 Supply Air Flow Ratio
|
|
1; !- Cooling Speed 2 Supply Air Flow Ratio
|
|
|
|
AirLoopHVAC:UnitarySystem,
|
|
PSZ-AC:4_Unitary_Package_DX, !- Name
|
|
Load, !- Control Type
|
|
Front_Retail, !- Controlling Zone or Thermostat Location
|
|
None, !- Dehumidification Control Type
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PSZ-AC:4_OA-PSZ-AC:4_Unitary_PackageNode, !- Air Inlet Node Name
|
|
PSZ-AC:4 Supply Equipment Outlet Node, !- Air Outlet Node Name
|
|
Fan:SystemModel, !- Supply Fan Object Type
|
|
PSZ-AC:4_addAQ_Unitary_Package_fan, !- Supply Fan Name
|
|
BlowThrough, !- Fan Placement
|
|
HVACOperationSchd, !- Supply Air Fan Operating Mode Schedule Name
|
|
Coil:Heating:Fuel, !- Heating Coil Object Type
|
|
PSZ-AC:4_Unitary_Package_HeatCoil, !- Heating Coil Name
|
|
1, !- DX Heating Coil Sizing Ratio
|
|
Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type
|
|
PSZ-AC:4_Unitary_Package_CoolCoil, !- Cooling Coil Name
|
|
No, !- Use DOAS DX Cooling Coil
|
|
2, !- Minimum Supply Air Temperature {C}
|
|
SensibleOnlyLoadControl, !- Latent Load Control
|
|
, !- Supplemental Heating Coil Object Type
|
|
, !- Supplemental Heating Coil Name
|
|
SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method
|
|
AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
|
|
SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method
|
|
AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
|
|
SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method
|
|
AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s}
|
|
, !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- No Load Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- No Load Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W}
|
|
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W}
|
|
AUTOSIZE, !- Maximum Supply Air Temperature {C}
|
|
, !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C}
|
|
, !- Outdoor Dry-Bulb Temperature Sensor Node Name
|
|
, !- Maximum Cycling Rate {cycles/hr}
|
|
, !- Heat Pump Time Constant {s}
|
|
, !- Fraction of On-Cycle Power Use
|
|
, !- Heat Pump Fan Delay Time {s}
|
|
, !- Ancillary On-Cycle Electric Power {W}
|
|
, !- Ancillary Off-Cycle Electric Power {W}
|
|
, !- Design Heat Recovery Water Flow Rate {m3/s}
|
|
, !- Maximum Temperature for Heat Recovery {C}
|
|
, !- Heat Recovery Water Inlet Node Name
|
|
, !- Heat Recovery Water Outlet Node Name
|
|
UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type
|
|
PSZ-AC:4_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name
|
|
|
|
UnitarySystemPerformance:Multispeed,
|
|
PSZ-AC:4_Unitary_Package_DX_Perf, !- Name
|
|
2, !- Number of Speeds for Heating
|
|
2, !- Number of Speeds for Cooling
|
|
No, !- Single Mode Operation
|
|
1.0, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
|
|
1, !- Heating Speed 1 Supply Air Flow Ratio
|
|
1.0, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
|
|
1, !- Heating Speed 2 Supply Air Flow Ratio
|
|
1; !- Cooling Speed 2 Supply Air Flow Ratio
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CONTROLLER:OUTDOORAIR ===========
|
|
|
|
Controller:OutdoorAir,
|
|
PSZ-AC:1_OA_Controller, !- Name
|
|
PSZ-AC:1_OARelief Node, !- Relief Air Outlet Node Name
|
|
PSZ-AC:1 Supply Equipment Inlet Node, !- Return Air Node Name
|
|
PSZ-AC:1_OA-PSZ-AC:1_Unitary_PackageNode, !- Mixed Air Node Name
|
|
PSZ-AC:1_OAInlet Node, !- Actuator Node Name
|
|
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
DifferentialDryBulb, !- Economizer Control Type
|
|
ModulateFlow, !- Economizer Control Action Type
|
|
, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
|
|
, !- Economizer Maximum Limit Enthalpy {J/kg}
|
|
, !- Economizer Maximum Limit Dewpoint Temperature {C}
|
|
, !- Electronic Enthalpy Limit Curve Name
|
|
, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
|
|
LockoutWithHeating, !- Lockout Type
|
|
FixedMinimum, !- Minimum Limit Type
|
|
MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name
|
|
, !- Minimum Fraction of Outdoor Air Schedule Name
|
|
SZ_system_OA_Max_Frac_SCH; !- Maximum Fraction of Outdoor Air Schedule Name
|
|
|
|
Controller:OutdoorAir,
|
|
PSZ-AC:2_OA_Controller, !- Name
|
|
PSZ-AC:2_OARelief Node, !- Relief Air Outlet Node Name
|
|
PSZ-AC:2 Supply Equipment Inlet Node, !- Return Air Node Name
|
|
PSZ-AC:2_OA-PSZ-AC:2_Unitary_PackageNode, !- Mixed Air Node Name
|
|
PSZ-AC:2_OAInlet Node, !- Actuator Node Name
|
|
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
DifferentialDryBulb, !- Economizer Control Type
|
|
ModulateFlow, !- Economizer Control Action Type
|
|
, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
|
|
, !- Economizer Maximum Limit Enthalpy {J/kg}
|
|
, !- Economizer Maximum Limit Dewpoint Temperature {C}
|
|
, !- Electronic Enthalpy Limit Curve Name
|
|
, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
|
|
LockoutWithHeating, !- Lockout Type
|
|
FixedMinimum, !- Minimum Limit Type
|
|
MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name
|
|
, !- Minimum Fraction of Outdoor Air Schedule Name
|
|
SZ_system_OA_Max_Frac_SCH; !- Maximum Fraction of Outdoor Air Schedule Name
|
|
|
|
|
|
Controller:OutdoorAir,
|
|
PSZ-AC:3_OA_Controller, !- Name
|
|
PSZ-AC:3_OARelief Node, !- Relief Air Outlet Node Name
|
|
PSZ-AC:3 Supply Equipment Inlet Node, !- Return Air Node Name
|
|
PSZ-AC:3_OA-PSZ-AC:3_Unitary_PackageNode, !- Mixed Air Node Name
|
|
PSZ-AC:3_OAInlet Node, !- Actuator Node Name
|
|
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
DifferentialDryBulb, !- Economizer Control Type
|
|
ModulateFlow, !- Economizer Control Action Type
|
|
, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
|
|
, !- Economizer Maximum Limit Enthalpy {J/kg}
|
|
, !- Economizer Maximum Limit Dewpoint Temperature {C}
|
|
, !- Electronic Enthalpy Limit Curve Name
|
|
, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
|
|
LockoutWithHeating, !- Lockout Type
|
|
FixedMinimum, !- Minimum Limit Type
|
|
MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name
|
|
, !- Minimum Fraction of Outdoor Air Schedule Name
|
|
SZ_system_OA_Max_Frac_SCH; !- Maximum Fraction of Outdoor Air Schedule Name
|
|
|
|
Controller:OutdoorAir,
|
|
PSZ-AC:4_OA_Controller, !- Name
|
|
PSZ-AC:4_OARelief Node, !- Relief Air Outlet Node Name
|
|
PSZ-AC:4 Supply Equipment Inlet Node, !- Return Air Node Name
|
|
PSZ-AC:4_OA-PSZ-AC:4_Unitary_PackageNode, !- Mixed Air Node Name
|
|
PSZ-AC:4_OAInlet Node, !- Actuator Node Name
|
|
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
DifferentialDryBulb, !- Economizer Control Type
|
|
ModulateFlow, !- Economizer Control Action Type
|
|
, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
|
|
, !- Economizer Maximum Limit Enthalpy {J/kg}
|
|
, !- Economizer Maximum Limit Dewpoint Temperature {C}
|
|
, !- Electronic Enthalpy Limit Curve Name
|
|
, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
|
|
LockoutWithHeating, !- Lockout Type
|
|
FixedMinimum, !- Minimum Limit Type
|
|
MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name
|
|
, !- Minimum Fraction of Outdoor Air Schedule Name
|
|
SZ_system_OA_Max_Frac_SCH; !- Maximum Fraction of Outdoor Air Schedule Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:CONTROLLERLIST ===========
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
PSZ-AC:1_OA_Controllers, !- Name
|
|
Controller:OutdoorAir, !- Controller 1 Object Type
|
|
PSZ-AC:1_OA_Controller; !- Controller 1 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
PSZ-AC:2_OA_Controllers, !- Name
|
|
Controller:OutdoorAir, !- Controller 1 Object Type
|
|
PSZ-AC:2_OA_Controller; !- Controller 1 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
PSZ-AC:3_OA_Controllers, !- Name
|
|
Controller:OutdoorAir, !- Controller 1 Object Type
|
|
PSZ-AC:3_OA_Controller; !- Controller 1 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
PSZ-AC:4_OA_Controllers, !- Name
|
|
Controller:OutdoorAir, !- Controller 1 Object Type
|
|
PSZ-AC:4_OA_Controller; !- Controller 1 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC ===========
|
|
|
|
|
|
AirLoopHVAC,
|
|
PSZ-AC:1, !- Name
|
|
, !- Controller List Name
|
|
PSZ-AC:1 Availability Manager List, !- Availability Manager List Name
|
|
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
|
|
PSZ-AC:1 Air Loop Branches, !- Branch List Name
|
|
, !- Connector List Name
|
|
PSZ-AC:1 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
|
|
PSZ-AC:1 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
|
|
PSZ-AC:1 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
|
|
PSZ-AC:1 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
|
|
|
|
|
|
|
|
AirLoopHVAC,
|
|
PSZ-AC:2, !- Name
|
|
, !- Controller List Name
|
|
PSZ-AC:2 Availability Manager List, !- Availability Manager List Name
|
|
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
|
|
PSZ-AC:2 Air Loop Branches, !- Branch List Name
|
|
, !- Connector List Name
|
|
PSZ-AC:2 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
|
|
PSZ-AC:2 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
|
|
PSZ-AC:2 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
|
|
PSZ-AC:2 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
|
|
|
|
|
|
|
|
AirLoopHVAC,
|
|
PSZ-AC:3, !- Name
|
|
, !- Controller List Name
|
|
PSZ-AC:3 Availability Manager List, !- Availability Manager List Name
|
|
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
|
|
PSZ-AC:3 Air Loop Branches, !- Branch List Name
|
|
, !- Connector List Name
|
|
PSZ-AC:3 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
|
|
PSZ-AC:3 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
|
|
PSZ-AC:3 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
|
|
PSZ-AC:3 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
|
|
|
|
|
|
|
|
AirLoopHVAC,
|
|
PSZ-AC:4, !- Name
|
|
, !- Controller List Name
|
|
PSZ-AC:4 Availability Manager List, !- Availability Manager List Name
|
|
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
|
|
PSZ-AC:4 Air Loop Branches, !- Branch List Name
|
|
, !- Connector List Name
|
|
PSZ-AC:4 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
|
|
PSZ-AC:4 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
|
|
PSZ-AC:4 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
|
|
PSZ-AC:4 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:OUTDOORAIRSYSTEM:EQUIPMENTLIST ===========
|
|
|
|
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
|
|
PSZ-AC:1_OA_Equipment, !- Name
|
|
OutdoorAir:Mixer, !- Component 1 Object Type
|
|
PSZ-AC:1_OAMixing Box; !- Component 1 Name
|
|
|
|
|
|
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
|
|
PSZ-AC:2_OA_Equipment, !- Name
|
|
OutdoorAir:Mixer, !- Component 1 Object Type
|
|
PSZ-AC:2_OAMixing Box; !- Component 1 Name
|
|
|
|
|
|
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
|
|
PSZ-AC:3_OA_Equipment, !- Name
|
|
OutdoorAir:Mixer, !- Component 1 Object Type
|
|
PSZ-AC:3_OAMixing Box; !- Component 1 Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
|
|
PSZ-AC:4_OA_Equipment, !- Name
|
|
OutdoorAir:Mixer, !- Component 1 Object Type
|
|
PSZ-AC:4_OAMixing Box; !- Component 1 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:OUTDOORAIRSYSTEM ===========
|
|
|
|
AirLoopHVAC:OutdoorAirSystem,
|
|
PSZ-AC:1_OA, !- Name
|
|
PSZ-AC:1_OA_Controllers, !- Controller List Name
|
|
PSZ-AC:1_OA_Equipment, !- Outdoor Air Equipment List Name
|
|
PSZ-AC:1 Availability Manager List; !- Availability Manager List Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem,
|
|
PSZ-AC:2_OA, !- Name
|
|
PSZ-AC:2_OA_Controllers, !- Controller List Name
|
|
PSZ-AC:2_OA_Equipment, !- Outdoor Air Equipment List Name
|
|
PSZ-AC:2 Availability Manager List; !- Availability Manager List Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem,
|
|
PSZ-AC:3_OA, !- Name
|
|
PSZ-AC:3_OA_Controllers, !- Controller List Name
|
|
PSZ-AC:3_OA_Equipment, !- Outdoor Air Equipment List Name
|
|
PSZ-AC:3 Availability Manager List; !- Availability Manager List Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem,
|
|
PSZ-AC:4_OA, !- Name
|
|
PSZ-AC:4_OA_Controllers, !- Controller List Name
|
|
PSZ-AC:4_OA_Equipment, !- Outdoor Air Equipment List Name
|
|
PSZ-AC:4 Availability Manager List; !- Availability Manager List Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTDOORAIR:MIXER ===========
|
|
|
|
OutdoorAir:Mixer,
|
|
PSZ-AC:1_OAMixing Box, !- Name
|
|
PSZ-AC:1_OA-PSZ-AC:1_Unitary_PackageNode, !- Mixed Air Node Name
|
|
PSZ-AC:1_OAInlet Node, !- Outdoor Air Stream Node Name
|
|
PSZ-AC:1_OARelief Node, !- Relief Air Stream Node Name
|
|
PSZ-AC:1 Supply Equipment Inlet Node; !- Return Air Stream Node Name
|
|
|
|
OutdoorAir:Mixer,
|
|
PSZ-AC:2_OAMixing Box, !- Name
|
|
PSZ-AC:2_OA-PSZ-AC:2_Unitary_PackageNode, !- Mixed Air Node Name
|
|
PSZ-AC:2_OAInlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name !- Outdoor
|
|
PSZ-AC:2_OARelief Node, !- Relief Air Stream Node Name
|
|
PSZ-AC:2 Supply Equipment Inlet Node; !- Return Air Stream Node Name
|
|
OutdoorAir:Mixer,
|
|
PSZ-AC:3_OAMixing Box, !- Name
|
|
PSZ-AC:3_OA-PSZ-AC:3_Unitary_PackageNode, !- Mixed Air Node Name
|
|
PSZ-AC:3_OAInlet Node, !- Outdoor Air Stream Node Name
|
|
PSZ-AC:3_OARelief Node, !- Relief Air Stream Node Name
|
|
PSZ-AC:3 Supply Equipment Inlet Node; !- Return Air Stream Node Name
|
|
|
|
OutdoorAir:Mixer,
|
|
PSZ-AC:4_OAMixing Box, !- Name
|
|
PSZ-AC:4_OA-PSZ-AC:4_Unitary_PackageNode, !- Mixed Air Node Name
|
|
PSZ-AC:4_OAInlet Node, !- Outdoor Air Stream Node Name
|
|
PSZ-AC:4_OARelief Node, !- Relief Air Stream Node Name
|
|
PSZ-AC:4 Supply Equipment Inlet Node; !- Return Air Stream Node Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:ZONESPLITTER ===========
|
|
|
|
AirLoopHVAC:ZoneSplitter,
|
|
PSZ-AC:1 Supply Air Splitter, !- Name
|
|
PSZ-AC:1 Zone Equipment Inlet Node, !- Inlet Node Name
|
|
Back_Space Direct Air Inlet Node Name; !- Outlet 1 Node Name
|
|
|
|
AirLoopHVAC:ZoneSplitter,
|
|
PSZ-AC:2 Supply Air Splitter, !- Name
|
|
PSZ-AC:2 Zone Equipment Inlet Node, !- Inlet Node Name
|
|
Core_Retail Direct Air Inlet Node Name; !- Outlet 1 Node Name
|
|
|
|
AirLoopHVAC:ZoneSplitter,
|
|
PSZ-AC:3 Supply Air Splitter, !- Name
|
|
PSZ-AC:3 Zone Equipment Inlet Node, !- Inlet Node Name
|
|
Point_Of_Sale Direct Air Inlet Node Name; !- Outlet 1 Node Name
|
|
|
|
AirLoopHVAC:ZoneSplitter,
|
|
PSZ-AC:4 Supply Air Splitter, !- Name
|
|
PSZ-AC:4 Zone Equipment Inlet Node, !- Inlet Node Name
|
|
Front_Retail Direct Air Inlet Node Name; !- Outlet 1 Node Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:SUPPLYPATH ===========
|
|
|
|
AirLoopHVAC:SupplyPath,
|
|
PSZ-AC:1, !- Name
|
|
PSZ-AC:1 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
|
|
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
|
|
PSZ-AC:1 Supply Air Splitter; !- Component 1 Name
|
|
|
|
AirLoopHVAC:SupplyPath,
|
|
PSZ-AC:2, !- Name
|
|
PSZ-AC:2 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
|
|
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
|
|
PSZ-AC:2 Supply Air Splitter; !- Component 1 Name
|
|
|
|
AirLoopHVAC:SupplyPath,
|
|
PSZ-AC:3, !- Name
|
|
PSZ-AC:3 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
|
|
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
|
|
PSZ-AC:3 Supply Air Splitter; !- Component 1 Name
|
|
|
|
AirLoopHVAC:SupplyPath,
|
|
PSZ-AC:4, !- Name
|
|
PSZ-AC:4 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
|
|
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
|
|
PSZ-AC:4 Supply Air Splitter; !- Component 1 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:ZONEMIXER ===========
|
|
|
|
AirLoopHVAC:ZoneMixer,
|
|
PSZ-AC:1 Return Air Mixer, !- Name
|
|
PSZ-AC:1 Zone Equipment Outlet Node, !- Outlet Node Name
|
|
Back_Space Return Air Node Name; !- Inlet 1 Node Name
|
|
|
|
AirLoopHVAC:ZoneMixer,
|
|
PSZ-AC:2 Return Air Mixer, !- Name
|
|
PSZ-AC:2 Zone Equipment Outlet Node, !- Outlet Node Name
|
|
Core_Retail Return Air Node Name; !- Inlet 1 Node Name
|
|
|
|
AirLoopHVAC:ZoneMixer,
|
|
PSZ-AC:3 Return Air Mixer, !- Name
|
|
PSZ-AC:3 Zone Equipment Outlet Node, !- Outlet Node Name
|
|
Point_Of_Sale Return Air Node Name; !- Inlet 1 Node Name
|
|
|
|
AirLoopHVAC:ZoneMixer,
|
|
PSZ-AC:4 Return Air Mixer, !- Name
|
|
PSZ-AC:4 Zone Equipment Outlet Node, !- Outlet Node Name
|
|
Front_Retail Return Air Node Name; !- Inlet 1 Node Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:RETURNPATH ===========
|
|
|
|
AirLoopHVAC:ReturnPath,
|
|
PSZ-AC:1 Return Air Path,!- Name
|
|
PSZ-AC:1 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
|
|
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
|
|
PSZ-AC:1 Return Air Mixer; !- Component 1 Name
|
|
|
|
AirLoopHVAC:ReturnPath,
|
|
PSZ-AC:2 Return Air Path,!- Name
|
|
PSZ-AC:2 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
|
|
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
|
|
PSZ-AC:2 Return Air Mixer; !- Component 1 Name
|
|
|
|
AirLoopHVAC:ReturnPath,
|
|
PSZ-AC:3 Return Air Path,!- Name
|
|
PSZ-AC:3 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
|
|
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
|
|
PSZ-AC:3 Return Air Mixer; !- Component 1 Name
|
|
|
|
AirLoopHVAC:ReturnPath,
|
|
PSZ-AC:4 Return Air Path,!- Name
|
|
PSZ-AC:4 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
|
|
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
|
|
PSZ-AC:4 Return Air Mixer; !- Component 1 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: BRANCH ===========
|
|
|
|
Branch,
|
|
PSZ-AC:1 Air Loop Main Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
|
|
PSZ-AC:1_OA, !- Component 1 Name
|
|
PSZ-AC:1 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
|
|
PSZ-AC:1_OA-PSZ-AC:1_Unitary_PackageNode, !- Component 1 Outlet Node Name
|
|
AirLoopHVAC:UnitarySystem, !- Component 2 Object Type
|
|
PSZ-AC:1_Unitary_Package_DX, !- Component 2 Name
|
|
PSZ-AC:1_OA-PSZ-AC:1_Unitary_PackageNode, !- Component 2 Inlet Node Name
|
|
PSZ-AC:1 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name
|
|
|
|
Branch,
|
|
PSZ-AC:2 Air Loop Main Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
|
|
PSZ-AC:2_OA, !- Component 1 Name
|
|
PSZ-AC:2 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
|
|
PSZ-AC:2_OA-PSZ-AC:2_Unitary_PackageNode, !- Component 1 Outlet Node Name
|
|
AirLoopHVAC:UnitarySystem, !- Component 2 Object Type
|
|
PSZ-AC:2_Unitary_Package_DX, !- Component 2 Name
|
|
PSZ-AC:2_OA-PSZ-AC:2_Unitary_PackageNode, !- Component 2 Inlet Node Name
|
|
PSZ-AC:2 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name
|
|
|
|
Branch,
|
|
PSZ-AC:3 Air Loop Main Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
|
|
PSZ-AC:3_OA, !- Component 1 Name
|
|
PSZ-AC:3 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
|
|
PSZ-AC:3_OA-PSZ-AC:3_Unitary_PackageNode, !- Component 1 Outlet Node Name
|
|
AirLoopHVAC:UnitarySystem, !- Component 2 Object Type
|
|
PSZ-AC:3_Unitary_Package_DX, !- Component 2 Name
|
|
PSZ-AC:3_OA-PSZ-AC:3_Unitary_PackageNode, !- Component 2 Inlet Node Name
|
|
PSZ-AC:3 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name
|
|
|
|
Branch,
|
|
PSZ-AC:4 Air Loop Main Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
|
|
PSZ-AC:4_OA, !- Component 1 Name
|
|
PSZ-AC:4 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
|
|
PSZ-AC:4_OA-PSZ-AC:4_Unitary_PackageNode, !- Component 1 Outlet Node Name
|
|
AirLoopHVAC:UnitarySystem, !- Component 2 Object Type
|
|
PSZ-AC:4_Unitary_Package_DX, !- Component 2 Name
|
|
PSZ-AC:4_OA-PSZ-AC:4_Unitary_PackageNode, !- Component 2 Inlet Node Name
|
|
PSZ-AC:4 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: BRANCHLIST ===========
|
|
|
|
BranchList,
|
|
PSZ-AC:1 Air Loop Branches, !- Name
|
|
PSZ-AC:1 Air Loop Main Branch; !- Branch 1 Name
|
|
|
|
BranchList,
|
|
PSZ-AC:2 Air Loop Branches, !- Name
|
|
PSZ-AC:2 Air Loop Main Branch; !- Branch 1 Name
|
|
|
|
BranchList,
|
|
PSZ-AC:3 Air Loop Branches, !- Name
|
|
PSZ-AC:3 Air Loop Main Branch; !- Branch 1 Name
|
|
|
|
BranchList,
|
|
PSZ-AC:4 Air Loop Branches, !- Name
|
|
PSZ-AC:4 Air Loop Main Branch; !- Branch 1 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: NODELIST ===========
|
|
|
|
NodeList,
|
|
Back_Space Inlet Nodes, !- Name
|
|
Back_Space Direct Air Inlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Core_Retail Inlet Nodes, !- Name
|
|
Core_Retail Direct Air Inlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Point_Of_Sale Inlet Nodes, !- Name
|
|
Point_Of_Sale Direct Air Inlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Front_Retail Inlet Nodes,!- Name
|
|
Front_Retail Direct Air Inlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Front_Entry Inlet Nodes, !- Name
|
|
Front_Entry Unit Heater Inlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Front_Entry Exhaust Nodes, !- Name
|
|
Front_Entry Unit Heater Exhaust Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
PSZ-AC:1_OANode List, !- Name
|
|
PSZ-AC:1_OAInlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
PSZ-AC:2_OANode List, !- Name
|
|
PSZ-AC:2_OAInlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
PSZ-AC:3_OANode List, !- Name
|
|
PSZ-AC:3_OAInlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
PSZ-AC:4_OANode List, !- Name
|
|
PSZ-AC:4_OAInlet Node; !- Node 1 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTDOORAIR:NODELIST ===========
|
|
|
|
OutdoorAir:NodeList,
|
|
PSZ-AC:1_OANode List; !- Node or NodeList Name 1
|
|
|
|
OutdoorAir:NodeList,
|
|
PSZ-AC:2_OANode List; !- Node or NodeList Name 1
|
|
|
|
OutdoorAir:NodeList,
|
|
PSZ-AC:3_OANode List; !- Node or NodeList Name 1
|
|
|
|
OutdoorAir:NodeList,
|
|
PSZ-AC:4_OANode List; !- Node or NodeList Name 1
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AVAILABILITYMANAGER:NIGHTCYCLE ===========
|
|
|
|
AvailabilityManager:NightCycle,
|
|
PSZ-AC:1 Availability Manager, !- Name
|
|
Always_On, !- Applicability Schedule Name
|
|
HVACOperationSchd, !- Fan Schedule Name
|
|
CycleOnAny, !- Control Type
|
|
1.0, !- Thermostat Tolerance {deltaC}
|
|
FixedRunTime, !- Cycling Run Time Control Type
|
|
1800; !- Cycling Run Time {s}
|
|
|
|
AvailabilityManager:NightCycle,
|
|
PSZ-AC:2 Availability Manager, !- Name
|
|
Always_On, !- Applicability Schedule Name
|
|
HVACOperationSchd, !- Fan Schedule Name
|
|
CycleOnAny, !- Control Type
|
|
1.0, !- Thermostat Tolerance {deltaC}
|
|
FixedRunTime, !- Cycling Run Time Control Type
|
|
1800; !- Cycling Run Time {s}
|
|
|
|
AvailabilityManager:NightCycle,
|
|
PSZ-AC:3 Availability Manager, !- Name
|
|
Always_On, !- Applicability Schedule Name
|
|
HVACOperationSchd, !- Fan Schedule Name
|
|
CycleOnAny, !- Control Type
|
|
1.0, !- Thermostat Tolerance {deltaC}
|
|
FixedRunTime, !- Cycling Run Time Control Type
|
|
1800; !- Cycling Run Time {s}
|
|
|
|
AvailabilityManager:NightCycle,
|
|
PSZ-AC:4 Availability Manager, !- Name
|
|
Always_On, !- Applicability Schedule Name
|
|
HVACOperationSchd, !- Fan Schedule Name
|
|
CycleOnAny, !- Control Type
|
|
1.0, !- Thermostat Tolerance {deltaC}
|
|
FixedRunTime, !- Cycling Run Time Control Type
|
|
1800; !- Cycling Run Time {s}
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AVAILABILITYMANAGERASSIGNMENTLIST ===========
|
|
|
|
AvailabilityManagerAssignmentList,
|
|
PSZ-AC:1 Availability Manager List, !- Name
|
|
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
|
|
PSZ-AC:1 Availability Manager; !- Availability Manager 1 Name
|
|
|
|
AvailabilityManagerAssignmentList,
|
|
PSZ-AC:2 Availability Manager List, !- Name
|
|
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
|
|
PSZ-AC:2 Availability Manager; !- Availability Manager 1 Name
|
|
|
|
AvailabilityManagerAssignmentList,
|
|
PSZ-AC:3 Availability Manager List, !- Name
|
|
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
|
|
PSZ-AC:3 Availability Manager; !- Availability Manager 1 Name
|
|
|
|
AvailabilityManagerAssignmentList,
|
|
PSZ-AC:4 Availability Manager List, !- Name
|
|
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
|
|
PSZ-AC:4 Availability Manager; !- Availability Manager 1 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SETPOINTMANAGER:SINGLEZONE:REHEAT ===========
|
|
|
|
SetpointManager:SingleZone:Heating,
|
|
SupAirTemp MngrBack_Space - Htg, !- Name
|
|
Temperature, !- Control Variable
|
|
10.0, !- Minimum Supply Air Temperature {C}
|
|
50.0, !- Maximum Supply Air Temperature {C}
|
|
Back_Space, !- Control Zone Name
|
|
Back_Space Air Node, !- Zone Node Name
|
|
Back_Space Direct Air Inlet Node Name, !- Zone Inlet Node Name
|
|
PSZ-AC:1_Unitary_PackageCoolCoil air inlet; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:SingleZone:Cooling,
|
|
SupAirTemp MngrBack_Space - Clg, !- Name
|
|
Temperature, !- Control Variable
|
|
10.0, !- Minimum Supply Air Temperature {C}
|
|
50.0, !- Maximum Supply Air Temperature {C}
|
|
Back_Space, !- Control Zone Name
|
|
Back_Space Air Node, !- Zone Node Name
|
|
Back_Space Direct Air Inlet Node Name, !- Zone Inlet Node Name
|
|
PSZ-AC:1 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
|
|
|
|
SetpointManager:SingleZone:Heating,
|
|
SupAirTemp MngrCore_Retail - Htg, !- Name
|
|
Temperature, !- Control Variable
|
|
10.0, !- Minimum Supply Air Temperature {C}
|
|
50.0, !- Maximum Supply Air Temperature {C}
|
|
Core_Retail, !- Control Zone Name
|
|
Core_Retail Air Node, !- Zone Node Name
|
|
Core_Retail Direct Air Inlet Node Name, !- Zone Inlet Node Name
|
|
PSZ-AC:2_Unitary_PackageCoolCoil air inlet; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:SingleZone:Cooling,
|
|
SupAirTemp MngrCore_Retail - Clg, !- Name
|
|
Temperature, !- Control Variable
|
|
10.0, !- Minimum Supply Air Temperature {C}
|
|
50.0, !- Maximum Supply Air Temperature {C}
|
|
Core_Retail, !- Control Zone Name
|
|
Core_Retail Air Node, !- Zone Node Name
|
|
Core_Retail Direct Air Inlet Node Name, !- Zone Inlet Node Name
|
|
PSZ-AC:2 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
|
|
|
|
SetpointManager:SingleZone:Heating,
|
|
SupAirTemp MngrPoint_Of_Sale - Htg, !- Name
|
|
Temperature, !- Control Variable
|
|
10.0, !- Minimum Supply Air Temperature {C}
|
|
50.0, !- Maximum Supply Air Temperature {C}
|
|
Point_Of_Sale, !- Control Zone Name
|
|
Point_Of_Sale Air Node, !- Zone Node Name
|
|
Point_Of_Sale Direct Air Inlet Node Name, !- Zone Inlet Node Name
|
|
PSZ-AC:3_Unitary_PackageCoolCoil air inlet; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:SingleZone:Cooling,
|
|
SupAirTemp MngrPoint_Of_Sale - Clg, !- Name
|
|
Temperature, !- Control Variable
|
|
10.0, !- Minimum Supply Air Temperature {C}
|
|
50.0, !- Maximum Supply Air Temperature {C}
|
|
Point_Of_Sale, !- Control Zone Name
|
|
Point_Of_Sale Air Node, !- Zone Node Name
|
|
Point_Of_Sale Direct Air Inlet Node Name, !- Zone Inlet Node Name
|
|
PSZ-AC:3 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
|
|
|
|
SetpointManager:SingleZone:Heating,
|
|
SupAirTemp MngrFront_Retail - Htg, !- Name
|
|
Temperature, !- Control Variable
|
|
10.0, !- Minimum Supply Air Temperature {C}
|
|
50.0, !- Maximum Supply Air Temperature {C}
|
|
Front_Retail, !- Control Zone Name
|
|
Front_Retail Air Node, !- Zone Node Name
|
|
Front_Retail Direct Air Inlet Node Name, !- Zone Inlet Node Name
|
|
PSZ-AC:4_Unitary_PackageCoolCoil air inlet; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:SingleZone:Cooling,
|
|
SupAirTemp MngrFront_Retail - Clg, !- Name
|
|
Temperature, !- Control Variable
|
|
10.0, !- Minimum Supply Air Temperature {C}
|
|
50.0, !- Maximum Supply Air Temperature {C}
|
|
Front_Retail, !- Control Zone Name
|
|
Front_Retail Air Node, !- Zone Node Name
|
|
Front_Retail Direct Air Inlet Node Name, !- Zone Inlet Node Name
|
|
PSZ-AC:4 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SETPOINTMANAGER:MIXEDAIR ===========
|
|
|
|
SetpointManager:MixedAir,
|
|
PSZ-AC:1_OAMixed Air Temp Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
PSZ-AC:1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
PSZ-AC:1_OA-PSZ-AC:1_Unitary_PackageNode, !- Fan Inlet Node Name
|
|
PSZ-AC:1_Unitary_PackageHeatCoil air inlet, !- Fan Outlet Node Name
|
|
PSZ-AC:1_OA-PSZ-AC:1_Unitary_PackageNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
PSZ-AC:2_OAMixed Air Temp Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
PSZ-AC:2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
PSZ-AC:2_OA-PSZ-AC:2_Unitary_PackageNode, !- Fan Inlet Node Name
|
|
PSZ-AC:2_Unitary_PackageHeatCoil air inlet, !- Fan Outlet Node Name
|
|
PSZ-AC:2_OA-PSZ-AC:2_Unitary_PackageNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
PSZ-AC:3_OAMixed Air Temp Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
PSZ-AC:3 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
PSZ-AC:3_OA-PSZ-AC:3_Unitary_PackageNode, !- Fan Inlet Node Name
|
|
PSZ-AC:3_Unitary_PackageHeatCoil air inlet, !- Fan Outlet Node Name
|
|
PSZ-AC:3_OA-PSZ-AC:3_Unitary_PackageNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
PSZ-AC:4_OAMixed Air Temp Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
PSZ-AC:4 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
PSZ-AC:4_OA-PSZ-AC:4_Unitary_PackageNode, !- Fan Inlet Node Name
|
|
PSZ-AC:4_Unitary_PackageHeatCoil air inlet, !- Fan Outlet Node Name
|
|
PSZ-AC:4_OA-PSZ-AC:4_Unitary_PackageNode; !- Setpoint Node or NodeList Name
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: WATER HEATER:MIXED ===========
|
|
|
|
|
|
WaterHeater:Mixed,
|
|
Gas Tank, !- Name
|
|
1.5141647136E-01, !- Tank Volume {m3}
|
|
Hot Water Setpoint Temp Schedule, !- Setpoint Temperature Schedule Name
|
|
2.00000005298191, !- Deadband Temperature Difference {deltaC}
|
|
82.2222244003673, !- Maximum Temperature Limit {C}
|
|
Cycle, !- Heater Control Type
|
|
11722.842, !- Heater Maximum Capacity {W}
|
|
0, !- Heater Minimum Capacity {W}
|
|
, !- Heater Ignition Minimum Flow Rate {m3/s}
|
|
, !- Heater Ignition Delay {s}
|
|
NaturalGas, !- Heater Fuel Type
|
|
0.82, !- Heater Thermal Efficiency
|
|
, !- Part Load Factor Curve Name
|
|
1860, !- Off Cycle Parasitic Fuel Consumption Rate {W}
|
|
NaturalGas, !- Off Cycle Parasitic Fuel Type
|
|
0, !- Off Cycle Parasitic Heat Fraction to Tank
|
|
1860, !- On Cycle Parasitic Fuel Consumption Rate {W}
|
|
, !- On Cycle Parasitic Fuel Type
|
|
, !- On Cycle Parasitic Heat Fraction to Tank
|
|
Zone, !- Ambient Temperature Indicator
|
|
, !- Ambient Temperature Schedule Name
|
|
Back_space, !- Ambient Temperature Zone Name
|
|
, !- Ambient Temperature Outdoor Air Node Name
|
|
4.10807252, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K}
|
|
, !- Off Cycle Loss Fraction to Zone
|
|
4.10807252, !- On Cycle Loss Coefficient to Ambient Temperature {W/K}
|
|
, !- On Cycle Loss Fraction to Zone
|
|
1.89e-05, !- Peak Use Flow Rate {m3/s}
|
|
BLDG_SWH_SCH; !- Use Flow Rate Fraction Schedule Name
|
|
|
|
!No PV for this case
|
|
!- =========== ALL OBJECTS IN CLASS: CURVE:QUADRATIC ===========
|
|
|
|
Curve:Quadratic,
|
|
PSZ-AC_Unitary_PackagecoolFFF, !- Name
|
|
0.8, !- Coefficient1 Constant
|
|
0.2, !- Coefficient2 x
|
|
0.0, !- Coefficient3 x**2
|
|
0.5, !- Minimum Value of x
|
|
1.5; !- Maximum Value of x
|
|
|
|
Curve:Quadratic,
|
|
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Name
|
|
1.156, !- Coefficient1 Constant
|
|
-0.1816, !- Coefficient2 x
|
|
0.0256, !- Coefficient3 x**2
|
|
0.5, !- Minimum Value of x
|
|
1.5; !- Maximum Value of x
|
|
|
|
Curve:Quadratic,
|
|
PSZ-AC_Unitary_PackagecoolPLR, !- Name
|
|
0.75, !- Coefficient1 Constant
|
|
0.25, !- Coefficient2 x
|
|
0.0, !- Coefficient3 x**2
|
|
0.0, !- Minimum Value of x
|
|
1.0; !- Maximum Value of x
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CURVE:BIQUADRATIC ===========
|
|
|
|
Curve:Biquadratic,
|
|
PSZ-AC_Unitary_PackagecoolCapFT, !- Name
|
|
0.766956, !- Coefficient1 Constant
|
|
0.0107756, !- Coefficient2 x
|
|
-0.0000414703, !- Coefficient3 x**2
|
|
0.00134961, !- Coefficient4 y
|
|
-0.000261144, !- Coefficient5 y**2
|
|
0.000457488, !- Coefficient6 x*y
|
|
12.77778, !- Minimum Value of x
|
|
23.88889, !- Maximum Value of x
|
|
21.11111, !- Minimum Value of y
|
|
46.11111; !- Maximum Value of y
|
|
|
|
Curve:Biquadratic,
|
|
PSZ-AC_Unitary_PackagecoolEIRFT, !- Name
|
|
0.297145, !- Coefficient1 Constant
|
|
0.0430933, !- Coefficient2 x
|
|
-0.000748766, !- Coefficient3 x**2
|
|
0.00597727, !- Coefficient4 y
|
|
0.000482112, !- Coefficient5 y**2
|
|
-0.000956448, !- Coefficient6 x*y
|
|
12.77778, !- Minimum Value of x
|
|
23.88889, !- Maximum Value of x
|
|
21.11111, !- Minimum Value of y
|
|
46.11111; !- Maximum Value of y
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTPUT:REPORTS ===========
|
|
|
|
Output:Surfaces:Drawing,DXF;
|
|
|
|
Output:Surfaces:List,Details;
|
|
|
|
Output:VariableDictionary,IDF;
|
|
|
|
Output:Constructions,Constructions;
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTPUT:TABLE:SUMMARYREPORTS ===========
|
|
|
|
|
|
Output:Table:SummaryReports,
|
|
AllSummaryAndMonthly; !- Report 1 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTPUT:TABLE:MONTHLY ===========
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary TaskPurpose ProgressIndicator, !- Name ProgressIndicator,ForDetermination2019, ...
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary CodeName ASHRAE901, !- Name ASHRAE901, ASHRAE1891, IECC, Title24, ORSC, IGCC, ...
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary CodeYear 2019, !- Name all years for ASHRAE90.1, IECC, ASHRAE189.1
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary CodeAmendment NoneAmend, !- Name StateAmend,EEM, NoneAmend for national or state without amendment
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary PrototypeName RetailStandalone, !- Name 16 Prototypes
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary TaskScope National, !- Name National, State, City
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary State National, !- Name National for national analysis, NewYork, Utah,... for state analysis, or city name for city analysis. Spell out the name of the state without space between words
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary ClimateZone 6A, !- Name 0-8
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary RepresentCity USA_MN_Rochester, !- Name representative city like Honolulu for national, for each state, for city analysis. this is not the city of the weather file. The weather city will be extracted from epw file
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTPUTCONTROL:TABLE:STYLE ===========
|
|
|
|
OutputControl:Table:Style,
|
|
commaAndHTML; !- Column Separator
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTPUTCONTROL:REPORTINGTOLERANCES ===========
|
|
|
|
|
|
|
|
OutputControl:ReportingTolerances,
|
|
0.556, !- Tolerance for Time Heating Setpoint Not Met {deltaC}
|
|
0.556; !- Tolerance for Time Cooling Setpoint Not Met {deltaC}
|
|
|
|
Output:Meter:MeterFileOnly,Electricity:Facility,hourly;
|
|
Output:Meter:MeterFileOnly,Electricity:Building,hourly;
|
|
Output:Meter:MeterFileOnly,ElectricityNet:Facility,hourly;
|
|
Output:Meter:MeterFileOnly,Electricity:HVAC,hourly;
|
|
Output:Meter:MeterFileOnly,Gas:Facility,hourly;
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTPUT:VARIABLE ===========
|
|
|
|
! ! Site
|
|
!
|
|
! Output:Variable,*,Site Outdoor Air Drybulb Temperature,Hourly;
|
|
! Output:Variable,*,Site Outdoor Air Wetbulb Temperature,Hourly;
|
|
! Output:Variable,HVACOperationSchd,Schedule Value,Hourly;
|
|
!
|
|
! ! Outdoor Air
|
|
!
|
|
! Output:Variable,PSZ-AC:1_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
! Output:Variable,PSZ-AC:2_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
! Output:Variable,PSZ-AC:3_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
! Output:Variable,PSZ-AC:4_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
!
|
|
! ! return Air
|
|
!
|
|
! Output:Variable,PSZ-AC:1 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
! Output:Variable,PSZ-AC:2 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
! Output:Variable,PSZ-AC:3 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
! Output:Variable,PSZ-AC:4 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
! Output:Variable,PSZ-AC:1 Supply Equipment Inlet Node,System Node Temperature,Hourly;
|
|
! Output:Variable,PSZ-AC:2 Supply Equipment Inlet Node,System Node Temperature,Hourly;
|
|
! Output:Variable,PSZ-AC:3 Supply Equipment Inlet Node,System Node Temperature,Hourly;
|
|
! Output:Variable,PSZ-AC:4 Supply Equipment Inlet Node,System Node Temperature,Hourly;
|
|
! Output:Variable,PSZ-AC:1 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly;
|
|
! Output:Variable,PSZ-AC:2 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly;
|
|
! Output:Variable,PSZ-AC:3 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly;
|
|
! Output:Variable,PSZ-AC:4 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly;
|
|
!
|
|
! ! Supply Air
|
|
!
|
|
! Output:Variable,PSZ-AC:1 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
! Output:Variable,PSZ-AC:2 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
! Output:Variable,PSZ-AC:3 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
! Output:Variable,PSZ-AC:4 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
! Output:Variable,PSZ-AC:1 Supply Equipment Outlet Node,System Node Temperature,Hourly;
|
|
! Output:Variable,PSZ-AC:2 Supply Equipment Outlet Node,System Node Temperature,Hourly;
|
|
! Output:Variable,PSZ-AC:3 Supply Equipment Outlet Node,System Node Temperature,Hourly;
|
|
! Output:Variable,PSZ-AC:4 Supply Equipment Outlet Node,System Node Temperature,Hourly;
|
|
! Output:Variable,PSZ-AC:1 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly;
|
|
! Output:Variable,PSZ-AC:2 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly;
|
|
! Output:Variable,PSZ-AC:3 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly;
|
|
! Output:Variable,PSZ-AC:4 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly;
|
|
!
|
|
! ! Coil Load
|
|
!
|
|
! Output:Variable,*,Air System Cooling Coil Total Cooling Energy,Hourly;
|
|
! Output:Variable,*,Air System Heating Coil Total Heating Energy,Hourly;
|
|
!
|
|
! ! SHW
|
|
!
|
|
! Output:Variable,*,Water Heater Heating Rate,Hourly;
|
|
!
|
|
! ! Fan and Pump
|
|
!
|
|
! Output:Variable,*,Fan Electric Power,hourly; !- HVAC Average W
|
|
! Output:Variable,*,Pump Electric Power,hourly; !- HVAC Average W
|
|
! Output:Variable,*,Humidifier Electric Power,hourly; !- HVAC Average W
|
|
!
|
|
! ! Utility and Submeter
|
|
!
|
|
! Output:Meter,Electricity:Facility,Hourly;
|
|
! Output:Meter,Gas:Facility,Hourly;
|
|
! Output:Meter,InteriorLights:Electricity,Hourly;
|
|
! Output:Meter,ExteriorLights:Electricity,Hourly;
|
|
! Output:Meter,InteriorEquipment:Electricity,Hourly;
|
|
! Output:Meter,ExteriorEquipment:Electricity,Hourly;
|
|
! Output:Meter,Fans:Electricity,Hourly;
|
|
! Output:Meter,Pumps:Electricity,Hourly;
|
|
! Output:Meter,Heating:Electricity,Hourly;
|
|
! Output:Meter,Cooling:Electricity,Hourly;
|
|
! Output:Meter,HeatRejection:Electricity,Hourly;
|
|
! Output:Meter,Humidifier:Electricity,Hourly;
|
|
! Output:Meter,HeatRecovery:Electricity,Hourly;
|
|
! Output:Meter,DHW:Electricity,Hourly;
|
|
! Output:Meter,Cogeneration:Electricity,Hourly;
|
|
! Output:Meter,Refrigeration:Electricity,Hourly;
|
|
! Output:Meter,WaterSystems:Electricity,Hourly;
|
|
!
|
|
! Output:Meter,InteriorLights:Gas,Hourly;
|
|
! Output:Meter,ExteriorLights:Gas,Hourly;
|
|
! Output:Meter,InteriorEquipment:Gas,Hourly;
|
|
! Output:Meter,ExteriorEquipment:Gas,Hourly;
|
|
! Output:Meter,Fans:Gas,Hourly;
|
|
! Output:Meter,Pumps:Gas,Hourly;
|
|
! Output:Meter,Heating:Gas,Hourly;
|
|
! Output:Meter,Cooling:Gas,Hourly;
|
|
! Output:Meter,HeatRejection:Gas,Hourly;
|
|
! Output:Meter,Humidifier:Gas,Hourly;
|
|
! Output:Meter,HeatRecovery:Gas,Hourly;
|
|
! Output:Meter,DHW:Gas,Hourly;
|
|
! Output:Meter,Cogeneration:Gas,Hourly;
|
|
! Output:Meter,Refrigeration:Gas,Hourly;
|
|
! Output:Meter,WaterSystems:Gas,Hourly;
|
|
|
|
|
|
|
|
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
FrontEntry_Coil, !- Name
|
|
FrontEntry_CoilSched, !- Actuated Component Unique Name
|
|
Schedule:Compact, !- Actuated Component Type
|
|
Schedule Value; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
FrontEntry_Fan, !- Name
|
|
FrontEntry_FanSched, !- Actuated Component Unique Name
|
|
Schedule:Compact, !- Actuated Component Type
|
|
Schedule Value; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
FrontEntry_HeaterManager,!- Name
|
|
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
|
|
FrontEntry_HeaterControl;!- Program Name 1
|
|
|
|
EnergyManagementSystem:Program,
|
|
FrontEntry_HeaterControl, !- Name
|
|
SET OAT_F = (OAT_F*1.8)+32, !- Program Line 1
|
|
IF OAT_F > 45, !- Program Line 2
|
|
SET FrontEntry_Coil = 0, !- Program Line 3
|
|
SET FrontEntry_Fan = 0, !- Program Line 4
|
|
ELSE, !- Program Line 5
|
|
SET FrontEntry_Coil = 1, !- Program Line 6
|
|
SET FrontEntry_Fan = 1, !- Program Line 7
|
|
ENDIF; !- Program Line 8
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
OAT_F, !- Name
|
|
, !- Output:Variable or Output:Meter Index Key Name
|
|
Site Outdoor Air Drybulb Temperature; !- Output:Variable or Output:Meter Name
|
|
|
|
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
OAT, !- Name
|
|
Environment, !- Output:Variable or Output:Meter Index Key Name
|
|
Site Outdoor Air Drybulb Temperature; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
CLGSETP_SCH_Actuator, !- Name
|
|
CLGSETP_SCH_Yes_Optimum, !- Actuated Component Unique Name
|
|
Schedule:Compact, !- Actuated Component Type
|
|
Schedule Value; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
HTGSETP_SCH_Actuator, !- Name
|
|
HTGSETP_SCH_Yes_Optimum, !- Actuated Component Unique Name
|
|
Schedule:Compact, !- Actuated Component Type
|
|
Schedule Value; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
OA_BASED_OPTIMUM_START_EMS_Program Manager, !- Name
|
|
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
|
|
OA_BASED_OPTIMUM_START_EMS_Program; !- Program Name 1
|
|
|
|
EnergyManagementSystem:Program,
|
|
OA_BASED_OPTIMUM_START_EMS_Program, !- Name
|
|
IF DaylightSavings==0 && DayOfWeek>1 && Hour==5 && OAT<23.9 && OAT>1.7, !- Program Line 1
|
|
SET CLGSETP_SCH_Actuator = 29.4, !- Program Line 2
|
|
SET HTGSETP_SCH_Actuator = 15.6, !- <none>
|
|
ELSEIF DaylightSavings==0 && DayOfWeek==1 && Hour==7 && OAT<23.9 && OAT>1.7, !- <none>
|
|
SET CLGSETP_SCH_Actuator = 29.4, !- <none>
|
|
SET HTGSETP_SCH_Actuator = 15.6, !- <none>
|
|
ELSEIF DaylightSavings==1 && DayOfWeek>1 && Hour==4 && OAT<23.9 && OAT>1.7, !- <none>
|
|
SET CLGSETP_SCH_Actuator = 29.4, !- <none>
|
|
SET HTGSETP_SCH_Actuator = 15.6, !- <none>
|
|
ELSEIF DaylightSavings==1 && DayOfWeek==1 && Hour==6 && OAT<23.9 && OAT>1.7, !- <none>
|
|
SET CLGSETP_SCH_Actuator = 29.4, !- <none>
|
|
SET HTGSETP_SCH_Actuator = 15.6, !- <none>
|
|
ELSE, !- <none>
|
|
SET CLGSETP_SCH_Actuator = NULL, !- <none>
|
|
SET HTGSETP_SCH_Actuator = NULL, !- <none>
|
|
ENDIF; !- <none>
|
|
|
|
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Back_Space_LSr, !- Name
|
|
Back_Space, !- Output:Variable or Output:Meter Index Key Name
|
|
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Back_Space_Occ_Sensor, !- Name
|
|
Back_Space, !- Output:Variable or Output:Meter Index Key Name
|
|
People Occupant Count; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:InternalVariable,
|
|
Back_Space_Area, !- Name
|
|
Back_Space, !- Internal Data Index Key Name
|
|
Zone Floor Area; !- Internal Data Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
Back_Space_Light_Actuator, !- Name
|
|
Back_Space_lights, !- Actuated Component Unique Name
|
|
Lights, !- Actuated Component Type
|
|
Electric Power Level; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Program,
|
|
SET_Back_Space_Light_EMS_Program, !- Name
|
|
SET Back_Space_LSr_IP=0.093*Back_Space_LSr/Back_Space_Area, ! Calculate the actual LPD for each hour
|
|
IF (Back_Space_Occ_Sensor <= 0) && (Back_Space_LSr_IP >= 0.02),
|
|
SET Back_Space_Light_Actuator = 0.02*Back_Space_Area/0.09290304,
|
|
ELSE,
|
|
SET Back_Space_Light_Actuator = NULL,
|
|
ENDIF;
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
SET_Back_Space_Light_EMS_Program_Prog_Manager, !- Name
|
|
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
|
|
SET_Back_Space_Light_EMS_Program; !- Program Name 1
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Core_Retail_LSr, !- Name
|
|
Core_Retail, !- Output:Variable or Output:Meter Index Key Name
|
|
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Core_Retail_Occ_Sensor, !- Name
|
|
Core_Retail, !- Output:Variable or Output:Meter Index Key Name
|
|
People Occupant Count; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:InternalVariable,
|
|
Core_Retail_Area, !- Name
|
|
Core_Retail, !- Internal Data Index Key Name
|
|
Zone Floor Area; !- Internal Data Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
Core_Retail_Light_Actuator, !- Name
|
|
Core_Retail_lights, !- Actuated Component Unique Name
|
|
Lights, !- Actuated Component Type
|
|
Electric Power Level; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Program,
|
|
SET_Core_Retail_Light_EMS_Program, !- Name
|
|
SET Core_Retail_LSr_IP=0.093*Core_Retail_LSr/Core_Retail_Area, ! Calculate the actual LPD for each hour
|
|
IF (Core_Retail_Occ_Sensor <= 0) && (Core_Retail_LSr_IP >= 0.02),
|
|
SET Core_Retail_Light_Actuator = 0.02*Core_Retail_Area/0.09290304,
|
|
ELSE,
|
|
SET Core_Retail_Light_Actuator = NULL,
|
|
ENDIF;
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
SET_Core_Retail_Light_EMS_Program_Prog_Manager, !- Name
|
|
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
|
|
SET_Core_Retail_Light_EMS_Program; !- Program Name 1
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Point_Of_Sale_LSr, !- Name
|
|
Point_Of_Sale, !- Output:Variable or Output:Meter Index Key Name
|
|
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Point_Of_Sale_Occ_Sensor,!- Name
|
|
Point_Of_Sale, !- Output:Variable or Output:Meter Index Key Name
|
|
People Occupant Count; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:InternalVariable,
|
|
Point_Of_Sale_Area, !- Name
|
|
Point_Of_Sale, !- Internal Data Index Key Name
|
|
Zone Floor Area; !- Internal Data Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
Point_Of_Sale_Light_Actuator, !- Name
|
|
Point_Of_Sale_lights, !- Actuated Component Unique Name
|
|
Lights, !- Actuated Component Type
|
|
Electric Power Level; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Program,
|
|
SET_Point_Of_Sale_Light_EMS_Program, !- Name
|
|
SET Point_Of_Sale_LSr_IP=0.093*Point_Of_Sale_LSr/Point_Of_Sale_Area, ! Calculate the actual LPD for each hour
|
|
IF (Point_Of_Sale_Occ_Sensor <= 0) && (Point_Of_Sale_LSr_IP >= 0.02),
|
|
SET Point_Of_Sale_Light_Actuator = 0.02*Point_Of_Sale_Area/0.09290304,
|
|
ELSE,
|
|
SET Point_Of_Sale_Light_Actuator = NULL,
|
|
ENDIF;
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
SET_Point_Of_Sale_Light_EMS_Program_Prog_Manager, !- Name
|
|
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
|
|
SET_Point_Of_Sale_Light_EMS_Program; !- Program Name 1
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Front_Retail_LSr, !- Name
|
|
Front_Retail, !- Output:Variable or Output:Meter Index Key Name
|
|
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Front_Retail_Occ_Sensor, !- Name
|
|
Front_Retail, !- Output:Variable or Output:Meter Index Key Name
|
|
People Occupant Count; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:InternalVariable,
|
|
Front_Retail_Area, !- Name
|
|
Front_Retail, !- Internal Data Index Key Name
|
|
Zone Floor Area; !- Internal Data Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
Front_Retail_Light_Actuator, !- Name
|
|
Front_Retail_lights, !- Actuated Component Unique Name
|
|
Lights, !- Actuated Component Type
|
|
Electric Power Level; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Program,
|
|
SET_Front_Retail_Light_EMS_Program, !- Name
|
|
SET Front_Retail_LSr_IP=0.093*Front_Retail_LSr/Front_Retail_Area, ! Calculate the actual LPD for each hour
|
|
IF (Front_Retail_Occ_Sensor <= 0) && (Front_Retail_LSr_IP >= 0.02),
|
|
SET Front_Retail_Light_Actuator = 0.02*Front_Retail_Area/0.09290304,
|
|
ELSE,
|
|
SET Front_Retail_Light_Actuator = NULL,
|
|
ENDIF;
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
SET_Front_Retail_Light_EMS_Program_Prog_Manager, !- Name
|
|
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
|
|
SET_Front_Retail_Light_EMS_Program; !- Program Name 1
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Front_Entry_LSr, !- Name
|
|
Front_Entry, !- Output:Variable or Output:Meter Index Key Name
|
|
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Front_Entry_Occ_Sensor, !- Name
|
|
Front_Entry, !- Output:Variable or Output:Meter Index Key Name
|
|
People Occupant Count; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:InternalVariable,
|
|
Front_Entry_Area, !- Name
|
|
Front_Entry, !- Internal Data Index Key Name
|
|
Zone Floor Area; !- Internal Data Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
Front_Entry_Light_Actuator, !- Name
|
|
Front_Entry_lights, !- Actuated Component Unique Name
|
|
Lights, !- Actuated Component Type
|
|
Electric Power Level; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Program,
|
|
SET_Front_Entry_Light_EMS_Program, !- Name
|
|
SET Front_Entry_LSr_IP=0.093*Front_Entry_LSr/Front_Entry_Area, ! Calculate the actual LPD for each hour
|
|
IF (Front_Entry_Occ_Sensor <= 0) && (Front_Entry_LSr_IP >= 0.02),
|
|
SET Front_Entry_Light_Actuator = 0.02*Front_Entry_Area/0.09290304,
|
|
ELSE,
|
|
SET Front_Entry_Light_Actuator = NULL,
|
|
ENDIF;
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
SET_Front_Entry_Light_EMS_Program_Prog_Manager, !- Name
|
|
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
|
|
SET_Front_Entry_Light_EMS_Program; !- Program Name 1
|
|
|
|
|
|
|
|
|