10844 lines
494 KiB
Plaintext
10844 lines
494 KiB
Plaintext
|
|
!The DOE Prototype Building Models were developed by Pacific Northwest National Laboratory (PNNL), under contract with the U.S.
|
|
!Department of Energy (DOE). These building models were derived from DOE's Commercial Reference Building Models with modifications
|
|
!based on input from the ASHRAE Standard 90.1 committee, the Advanced Energy Design Guide series, and building industry experts. The
|
|
!prototypes models were developed to quantify energy saving impacts from newly published editions of ASHRAE Standard 90.1, 189.1, IECC,
|
|
!and other energy codes and standards. The basic building descriptions can be found in the Scorecards posted at www.energycodes.gov
|
|
!website. The recommended citation of the prototype models is
|
|
!
|
|
!DOE and PNNL. 2020. Commercial Prototype Building Models, Richland, WA, Pacific Northwest National Laboratory. Available at https://www.energycodes.gov/development/commercial/prototype_models.
|
|
!
|
|
!Detailed descriptions of the prototype model development and addenda modeling strategies can be found in the following reports:
|
|
!DOE, 2020. Preliminary Energy Savings Analysis: ANSI/ASHRAE/IES Standard 90.1-2019. Report prepared by Zhang, J., M. Rosenberg, J.
|
|
!Lerond, Y. Xie, Nambia, C., Y. Chen, R. Hart, M. Halverson, D. Maddox, and S. Goel, Richland, WA, Pacific Northwest National Laboratory.
|
|
!
|
|
!Zhang, J., Y. Chen, Y. Xie, M. Rosenberg, R. Hart. Energy and Energy Cost Savings Analysis of the 2018 IECC for Commercial Buildings.
|
|
!2018. PNNL-28125. Richland, WA: Pacific Northwest National Laboratory.
|
|
!
|
|
!DOE. 2017. Energy Savings Analysis: ANSI/ASHRAE/IES Standard 90.1-2016. Prepared by Athalye, R.A, M.A. Halverson, M.I. Rosenberg, B. Liu,
|
|
!J. Zhang, R. Hart, V.V. Mendon, S. Goel, Y. Chen, Y. Xie, and M. Zhao, Richland, WA, Pacific Northwest National Laboratory. https://www.energycodes.gov/sites/default/files/documents/02202018_Standard_90.1-2016_Determination_TSD.pdf.
|
|
!
|
|
!Zhang, J., Y. Xie, R.A. Athalye, J. Zhuge, M. Rosenberg, R. Hart, and B. Liu. Energy and Energy Cost Savings Analysis of the 2015 IECC
|
|
!for Commercial Buildings. 2015. PNNL-24269 Rev. 1. Richland, WA: Pacific Northwest National
|
|
!Laboratory. https://www.energycodes.gov/sites/default/files/documents/2015_IECC_Commercial_Analysis.pdf.
|
|
!
|
|
!Halverson M.A., M.I. Rosenberg, W. Wang, J. Zhang, V.V. Mendon, R.A. Athalye, Y. Xie, R. Hart, S. Goel, 2014. ANSI/ASHRAE/IES Standard
|
|
!90.1-2013 Determination of Energy Savings: Quantitative Analysis, PNNL-23479. Richland, WA: Pacific Northwest National Laboratory. https://www.energycodes.gov/sites/default/files/documents/901-2013_finalCommercialDeterminationQuantitativeAnalysis_TSD_0.pdf.
|
|
!
|
|
!Goel S., R.A. Athalye, W. Wang, J. Zhang, M.I. Rosenberg, Y. Xie, and R. Hart, et al. 2014. Enhancements to ASHRAE Standard 90.1
|
|
!Prototype Building Models. PNNL-23269. Richland, WA: Pacific Northwest National Laboratory. https://www.pnnl.gov/main/publications/external/technical_reports/PNNL-23269.pdf.
|
|
!
|
|
!Zhang J., R.A. Athalye, R. Hart, M.I. Rosenberg, Y. Xie, S. Goel, and V.V. Mendon, et al. 2013. Energy and Energy Cost Savings Analysis
|
|
!of the IECC for Commercial Buildings. PNNL-22760. Richland, WA: Pacific Northwest National Laboratory. http://www.pnnl.gov/main/publications/external/technical_reports/PNNL-22760.pdf.
|
|
!
|
|
!Thornton B.A., M.I. Rosenberg, E.E. Richman, W. Wang, Y. Xie, J. Zhang, H. Cho, VV Mendon, R.A. Athalye, and B. Liu. 2011. Achieving
|
|
!the 30% Goal: Energy and Cost Savings Analysis of ASHRAE Standard 90.1-2010. PNNL-20405. Richland, WA: Pacific Northwest National
|
|
!Laboratory. https://www.energycodes.gov/sites/default/files/documents/BECP_Energy_Cost_Savings_STD2010_May2011_v00.pdf.
|
|
!
|
|
!
|
|
! WeatherFile: USA_MN_Rochester.Intl.AP.726440_TMY3.epw
|
|
|
|
|
|
|
|
|
|
! BEGIN ECONOMIZER MAP
|
|
! Economizer Name, DX COIL Name
|
|
! PACU_VAV_bot_OA_Controller, PACU_VAV_bot_CoolC DXCoil
|
|
! PACU_VAV_mid_OA_Controller, PACU_VAV_mid_CoolC DXCoil
|
|
! PACU_VAV_top_OA_Controller, PACU_VAV_top_CoolC DXCoil
|
|
! END ECONOMIZER MAP
|
|
|
|
|
|
|
|
! GPARM parameters as input:
|
|
! Case = ASHRAE901_OfficeMedium_STD2019_Rochester
|
|
! SelectedCase =
|
|
! annual_run = yes
|
|
! slab_gtp = National_OfficeMedium_ASHRAE901_STD2016_Zone6A_nonres_MN-Rochester-MN.gtp
|
|
! basement_tempt = OfficeMedium_STD2007_Burlington_bsmt.idf
|
|
! avg_oa_tempt_ip = 43.475
|
|
! maxdiff_oa_tempt_ip = 60.3
|
|
! ext_wall_type = SteelFramedWall
|
|
! nonres_ext_wall_ufactor = 0.278234887
|
|
! roof_type = LightweightRoof
|
|
! nonres_roof_ufactor = 0.181704416
|
|
! roof_emissivity = 0.9
|
|
! roof_solar_absorp = 0.7
|
|
! nonres_window =
|
|
! economizer = DifferentialDryBulb
|
|
! skip_economizer_control = No
|
|
! sidelighting_control = yes_AY
|
|
! LPD_office = 6.888902667
|
|
! exterior_lights_watts = 0
|
|
! exterior_lights_watts_a = 519.2
|
|
! exterior_lights_watts_b = 375.7
|
|
! avg_oa_tempt = 6.375
|
|
! maxdiff_oa_tempt = 33.5
|
|
! infil = 0.00056896
|
|
! oa_flow_per_area = 0.000431773
|
|
! SAT_reset_switch = Yes
|
|
! SAT_reset_T = 15.6
|
|
! door_infil = 0.678659786
|
|
! frac_ofpk = 0.131
|
|
! damper_sched = MinOA_MotorizedDamper_Sched
|
|
! economizer_lockout = LockoutWithHeating
|
|
! heating_damper_act = Normal
|
|
! add_ck_pacu_vav_bot = Yes
|
|
! add_ck_pacu_vav_mid = Yes
|
|
! add_ck_pacu_vav_top = Yes
|
|
! core_bottom_mdp = 0.3
|
|
! perimeter_bot_zn_1_mdp = 0.3
|
|
! perimeter_bot_zn_2_mdp = 0.3
|
|
! perimeter_bot_zn_3_mdp = 0.3
|
|
! perimeter_bot_zn_4_mdp = 0.3
|
|
! core_mid_mdp = 0.3
|
|
! perimeter_mid_zn_1_mdp = 0.3
|
|
! perimeter_mid_zn_2_mdp = 0.3
|
|
! perimeter_mid_zn_3_mdp = 0.3
|
|
! perimeter_mid_zn_4_mdp = 0.3
|
|
! core_top_mdp = 0.3
|
|
! perimeter_top_zn_1_mdp = 0.3
|
|
! perimeter_top_zn_2_mdp = 0.3
|
|
! perimeter_top_zn_3_mdp = 0.3
|
|
! perimeter_top_zn_4_mdp = 0.3
|
|
! pacu_vav_bot_oaf = autosize
|
|
! pacu_vav_mid_oaf = autosize
|
|
! pacu_vav_top_oaf = autosize
|
|
! BLDG_ELEVATORS_LIGHTS_FAN_SCH = ELEV_LIGHT_FAN_SCH_ADD_DF
|
|
! BLDG_ELEVATORS_LIGHTS_FAN_POWER = 125
|
|
! BLDG_EQUIP_SCH = BLDG_EQUIP_SCH_ADV
|
|
! addendum_cd = 2016AS
|
|
! pv_generator = no
|
|
! pv_surface_area = 0
|
|
! STD189_overhang = no
|
|
! swh_et = 0.808039999
|
|
! swh_ua = 7.561562668
|
|
! ext_lgt_sch = Exterior_Lgt_ALWAYS_ON
|
|
! PACU_VAV_bot_ERV = No
|
|
! PACU_VAV_mid_ERV = No
|
|
! PACU_VAV_top_ERV = No
|
|
! LTG_SCH_SET = LTG_SET_STD2013
|
|
! transformer_size = 45000
|
|
! transformer_eff = 0.984
|
|
! PACU_VAV_bot_ERV_power = 736.00175
|
|
! PACU_VAV_mid_ERV_power = 736.00175
|
|
! PACU_VAV_top_ERV_power = 736.00175
|
|
! OA_BASED_OPTIMUM_START_EMS = yes
|
|
! OPTIMUM_START_SF_DEPENDENT_EMS = no
|
|
! wwr = 0.33
|
|
! pipe_heat_loss = 1886.44
|
|
! skip_EMSprogram = yes
|
|
! HtgSetP_Sch_PACU_VAV_bot = HTGSETP_SCH_YES_OPTIMUM
|
|
! HtgSetP_Sch_PACU_VAV_mid = HTGSETP_SCH_YES_OPTIMUM
|
|
! HtgSetP_Sch_PACU_VAV_top = HTGSETP_SCH_YES_OPTIMUM
|
|
! ClgSetP_Sch_PACU_VAV_bot = CLGSETP_SCH_YES_OPTIMUM
|
|
! ClgSetP_Sch_PACU_VAV_mid = CLGSETP_SCH_YES_OPTIMUM
|
|
! ClgSetP_Sch_PACU_VAV_top = CLGSETP_SCH_YES_OPTIMUM
|
|
! Wfile_TMY3 = USA_MN_Rochester.Intl.AP.726440_TMY3.epw
|
|
! loadProfile = No
|
|
! receptacle_ctrl_occ_reduction_frac = 0.95308699
|
|
! receptacle_ctrl_unocc_reduction_frac = 0.769184602
|
|
! SHW_Pump_Head = 29891
|
|
! CodeName = ASHRAE90.1_STD2019
|
|
! CZ_City_Old = Burlington
|
|
! CZ_Label = 6A
|
|
! exterior_lights_watts_c = 4341.6
|
|
! Addendum_AH = Yes
|
|
! LPD_Ctrl = 0.02
|
|
! con_swingdoor_r = 0.475963827
|
|
! office_standby_mode = Yes
|
|
! nonres_window_u_factor = 0.34
|
|
! nonres_window_shgc = 0.38
|
|
! nonresLSG = 1.1
|
|
! AnalysisPurpose = ProgressIndicator
|
|
! AnalysisCodeName = ASHRAE901
|
|
! AnalysisCodeYear = 2019
|
|
! AnalysisAmendment = NoneAmend
|
|
! AnalysisPrototype = OfficeMedium
|
|
! AnalysisScope = National
|
|
! AnalysisState = National
|
|
! AnalysisClimateZone = 6A
|
|
! AnalysisCity = USA_MN_Rochester
|
|
! var_Ffactor_IP = 0.51
|
|
! var_Cfactor_IP = 0.092
|
|
! Core_ZN_SWH_flow = 3.57511e-06
|
|
|
|
|
|
|
|
|
|
|
|
! specify overhang_pf for 1891 codes
|
|
|
|
|
|
|
|
|
|
|
|
Version,9.0;
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: BUILDING ===========
|
|
|
|
Building,
|
|
OfficeMedium, !- Name
|
|
0.0000, !- North Axis {deg}
|
|
City, !- Terrain
|
|
0.0400, !- Loads Convergence Tolerance Value
|
|
0.2000, !- Temperature Convergence Tolerance Value {deltaC}
|
|
FullInteriorAndExterior, !- Solar Distribution
|
|
25, !- Maximum Number of Warmup Days
|
|
6; !- Minimum Number of Warmup Days
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: TIMESTEP IN HOUR ===========
|
|
|
|
Timestep,6;
|
|
|
|
ConvergenceLimits,
|
|
1, !- Minimum System Timestep {minutes}
|
|
20; !- Maximum HVAC Iterations
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: INSIDE CONVECTION ALGORITHM ===========
|
|
|
|
SurfaceConvectionAlgorithm:Inside,TARP;
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTSIDE CONVECTION ALGORITHM ===========
|
|
|
|
SurfaceConvectionAlgorithm:Outside,TARP;
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SOLUTION ALGORITHM ===========
|
|
|
|
HeatBalanceAlgorithm,ConductionTransferFunction;
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SHADOWING CALCULATIONS ===========
|
|
|
|
ShadowCalculation,
|
|
AverageOverDaysInFrequency, !- Calculation Method
|
|
30; !- Calculation Frequency
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: RUN CONTROL ===========
|
|
|
|
SimulationControl,
|
|
Yes, !- Do Zone Sizing Calculation
|
|
Yes, !- Do System Sizing Calculation
|
|
Yes, !- Do Plant Sizing Calculation
|
|
No, !- Run Simulation for Sizing Periods
|
|
YES; !- Run Simulation for Weather File Run Periods
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: RUNPERIOD ===========
|
|
|
|
RunPeriod,
|
|
, !- Name
|
|
1, !- Begin Month
|
|
1, !- Begin Day of Month
|
|
, !- Begin Year
|
|
12, !- End Month
|
|
31, !- End Day of Month
|
|
, !- End Year
|
|
Sunday, !- Day of Week for Start Day
|
|
No, !- Use Weather File Holidays and Special Days
|
|
No, !- Use Weather File Daylight Saving Period
|
|
No, !- Apply Weekend Holiday Rule
|
|
Yes, !- Use Weather File Rain Indicators
|
|
Yes; !- Use Weather File Snow Indicators
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SPECIALDAYPERIOD ===========
|
|
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
New Years Day, !- Name
|
|
January 1, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Veterans Day, !- Name
|
|
November 11, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Christmas, !- Name
|
|
December 25, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Independence Day, !- Name
|
|
July 4, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
MLK Day, !- Name
|
|
3rd Monday in January, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Presidents Day, !- Name
|
|
3rd Monday in February, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Memorial Day, !- Name
|
|
Last Monday in May, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Labor Day, !- Name
|
|
1st Monday in September, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Columbus Day, !- Name
|
|
2nd Monday in October, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Thanksgiving, !- Name
|
|
4th Thursday in November,!- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: DAYLIGHTSAVINGPERIOD ===========
|
|
|
|
|
|
RunPeriodControl:DaylightSavingTime,
|
|
2nd Sunday in March, !- Start Date
|
|
1st Sunday in November; !- End Date
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: LOCATION ===========
|
|
! Site:Location and design-day objects created by:
|
|
! ../../_p.bin/ddy2idf /projects/bigsim/weather/EnergyPlus/tmy3.new/all/USA_MN_Rochester.Intl.AP.726440_TMY3.ddy
|
|
!
|
|
Site:Location,
|
|
Rochester International Arpt_MN_USA Design_Conditions, !- Site:Location Name
|
|
43.90, !- Latitude {N+ S-}
|
|
-92.50, !- Longitude {W- E+}
|
|
-6.00, !- Time Zone Relative to GMT {GMT+/-}
|
|
398.00; !- Elevation {m}
|
|
|
|
SizingPeriod:DesignDay,
|
|
Rochester International Arpt Ann Htg 99.6% Condns DB, !- Name
|
|
1, !- Month
|
|
21, !- Day of Month
|
|
WinterDesignDay,!- Day Type
|
|
-26.2, !- Maximum Dry-Bulb Temperature {C}
|
|
0.0, !- Daily Dry-Bulb Temperature Range {C}
|
|
DefaultMultipliers, !- Dry-Bulb Temperature Range Modifier Type
|
|
, !- Dry-Bulb Temperature Range Modifier Schedule Name
|
|
Wetbulb, !- Humidity Condition Type
|
|
-26.2, !- Wetbulb at Maximum Dry-Bulb {C}
|
|
, !- Humidity Indicating Day Schedule Name
|
|
, !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir}
|
|
, !- Enthalpy at Maximum Dry-Bulb {J/kg}
|
|
, !- Daily WetBulb Temperature Range {deltaC}
|
|
96634., !- Barometric Pressure {Pa}
|
|
5.7, !- Wind Speed {m/s} design conditions vs. traditional 6.71 m/s (15 mph)
|
|
310, !- Wind Direction {Degrees; N=0, S=180}
|
|
No, !- Rain {Yes/No}
|
|
No, !- Snow on ground {Yes/No}
|
|
No, !- Daylight Savings Time Indicator
|
|
ASHRAEClearSky, !- Solar Model Indicator
|
|
, !- Beam Solar Day Schedule Name
|
|
, !- Diffuse Solar Day Schedule Name
|
|
, !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub)
|
|
, !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud)
|
|
0.00; !- Clearness {0.0 to 1.1}
|
|
|
|
SizingPeriod:DesignDay,
|
|
Rochester International Arpt Ann Clg .4% Condns DB=>MWB, !- Name
|
|
7, !- Month
|
|
21, !- Day of Month
|
|
SummerDesignDay,!- Day Type
|
|
31.2, !- Maximum Dry-Bulb Temperature {C}
|
|
10.6, !- Daily Dry-Bulb Temperature Range {C}
|
|
DefaultMultipliers, !- Dry-Bulb Temperature Range Modifier Type
|
|
, !- Dry-Bulb Temperature Range Modifier Schedule Name
|
|
Wetbulb, !- Humidity Condition Type
|
|
23.1, !- Wetbulb at Maximum Dry-Bulb {C}
|
|
, !- Humidity Indicating Day Schedule Name
|
|
, !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir}
|
|
, !- Enthalpy at Maximum Dry-Bulb {J/kg}
|
|
, !- Daily WetBulb Temperature Range {deltaC}
|
|
96634., !- Barometric Pressure {Pa}
|
|
6.7, !- Wind Speed {m/s} design conditions vs. traditional 3.35 m/s (7mph)
|
|
200, !- Wind Direction {Degrees; N=0, S=180}
|
|
No, !- Rain {Yes/No}
|
|
No, !- Snow on ground {Yes/No}
|
|
No, !- Daylight Savings Time Indicator
|
|
ASHRAETau, !- Solar Model Indicator
|
|
, !- Beam Solar Day Schedule Name
|
|
, !- Diffuse Solar Day Schedule Name
|
|
0.404, !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub)
|
|
2.226; !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud)
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: WATER MAINS TEMPERATURES ===========
|
|
|
|
|
|
Site:WaterMainsTemperature,
|
|
Correlation, !- Calculation Method
|
|
, !- Temperature Schedule Name
|
|
6.375, !- Annual average outdoor air temperature {C}
|
|
33.5; !- Maximum difference in monthly average outdoor air temperatures {C}
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: Site:GroundTemperature:FCfactorMethod ===========
|
|
|
|
Site:GroundTemperature:FCfactorMethod,
|
|
7.4, !- January Ground Temperature {C}
|
|
-0.0, !- February Ground Temperature {C}
|
|
-7.6, !- March Ground Temperature {C}
|
|
-12.6, !- April Ground Temperature {C}
|
|
-7.7, !- May Ground Temperature {C}
|
|
0.3, !- June Ground Temperature {C}
|
|
7.0, !- July Ground Temperature {C}
|
|
14.2, !- August Ground Temperature {C}
|
|
19.2, !- September Ground Temperature {C}
|
|
20.9, !- October Ground Temperature {C}
|
|
20.0, !- November Ground Temperature {C}
|
|
15.4; !- December Ground Temperature {C}
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: MATERIAL:REGULAR-R ===========
|
|
|
|
Material:NoMass,
|
|
Opaque Door panel_con, !- Name
|
|
MediumRough, !- Roughness
|
|
0.475963827, !- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CONSTRUCTION ===========
|
|
|
|
Construction,
|
|
Swinging Door_con, !- Name
|
|
Opaque Door panel_con; !- Outside Layer
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CONSTRUCTION ===========
|
|
|
|
|
|
!
|
|
!- =========== ALL OBJECTS IN CLASS: MATERIAL:REGULAR ===========
|
|
|
|
Material,
|
|
Std Wood 6inch, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.15, !- Thickness {m}
|
|
0.12, !- Conductivity {W/m-K}
|
|
540.0000, !- Density {kg/m3}
|
|
1210, !- Specific Heat {J/kg-K}
|
|
0.9000000, !- Thermal Absorptance
|
|
0.7000000, !- Solar Absorptance
|
|
0.7000000; !- Visible Absorptance
|
|
|
|
Material,
|
|
AC02 Acoustic Ceiling, !- Name
|
|
MediumSmooth, !- Roughness
|
|
1.2700000E-02, !- Thickness {m}
|
|
5.7000000E-02, !- Conductivity {W/m-K}
|
|
288.0000, !- Density {kg/m3}
|
|
1339.000, !- Specific Heat {J/kg-K}
|
|
0.9000000, !- Thermal Absorptance
|
|
0.7000000, !- Solar Absorptance
|
|
0.2000000; !- Visible Absorptance
|
|
|
|
Material,
|
|
F07 25mm stucco, !- Name
|
|
Smooth, !- Roughness
|
|
0.0254, !- Thickness {m}
|
|
0.72, !- Conductivity {W/m-K}
|
|
1856, !- Density {kg/m3}
|
|
840, !- Specific Heat {J/kg-K}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
Material,
|
|
F08 Metal surface, !- Name
|
|
Smooth, !- Roughness
|
|
0.0008, !- Thickness {m}
|
|
45.28, !- Conductivity {W/m-K}
|
|
7824, !- Density {kg/m3}
|
|
500; !- Specific Heat {J/kg-K}
|
|
|
|
Material,
|
|
F08 Metal roof surface, !- Name
|
|
Smooth, !- Roughness
|
|
0.0008, !- Thickness {m}
|
|
45.28, !- Conductivity {W/m-K}
|
|
7824, !- Density {kg/m3}
|
|
500, !- Specific Heat {J/kg-K}
|
|
0.9, !- Absorptance:Thermal
|
|
0.7; !- Absorptance:Solar
|
|
|
|
Material,
|
|
F12 Asphalt shingles, !- Name
|
|
VeryRough, !- Roughness
|
|
0.0032, !- Thickness {m}
|
|
0.04, !- Conductivity {W/m-K}
|
|
1120, !- Density {kg/m3}
|
|
1260, !- Specific Heat {J/kg-K}
|
|
0.9, !- Absorptance:Thermal
|
|
0.7; !- Absorptance:Solar
|
|
|
|
Material,
|
|
F13 Built-up roofing, !- Name
|
|
Rough, !- Roughness
|
|
0.0095, !- Thickness {m}
|
|
0.16, !- Conductivity {W/m-K}
|
|
1120, !- Density {kg/m3}
|
|
1460, !- Specific Heat {J/kg-K}
|
|
0.9, !- Absorptance:Thermal
|
|
0.7; !- Absorptance:Solar
|
|
|
|
Material,
|
|
G01 13mm gypsum board, !- Name
|
|
Smooth, !- Roughness
|
|
0.0127, !- Thickness {m}
|
|
0.1600, !- Conductivity {W/m-K}
|
|
800.0000, !- Density {kg/m3}
|
|
1090.0000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Absorptance:Thermal
|
|
0.7000, !- Absorptance:Solar
|
|
0.5000; !- Absorptance:Visible
|
|
|
|
Material,
|
|
G01 16mm gypsum board, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0159, !- Thickness {m}
|
|
0.16, !- Conductivity {W/m-K}
|
|
800, !- Density {kg/m3}
|
|
1090; !- Specific Heat {J/kg-K}
|
|
|
|
Material,
|
|
G02 16mm plywood, !- Name
|
|
Smooth, !- Roughness
|
|
0.0159, !- Thickness {m}
|
|
0.12, !- Conductivity {W/m-K}
|
|
544, !- Density {kg/m3}
|
|
1210; !- Specific Heat {J/kg-K}
|
|
|
|
Material,
|
|
M14 150mm heavyweight concrete roof, !- Name
|
|
MediumRough, !- Roughness
|
|
0.1524, !- Thickness {m}
|
|
2.31, !- Conductivity {W/m-K}
|
|
2322, !- Density {kg/m3}
|
|
832; !- Specific Heat {J/kg-K}
|
|
|
|
|
|
Material,
|
|
100mm Normalweight concrete wall, !- Name - based on 90.1-2004 Appendix-Table A3-1B
|
|
MediumRough, !- Roughness
|
|
0.1016, !- Thickness {m}
|
|
2.31, !- Conductivity {W/m-K}
|
|
2322, !- Density {kg/m3}
|
|
832; !- Specific Heat {J/kg-K}
|
|
|
|
|
|
Material,
|
|
200mm Normalweight concrete wall, !- Name - based on 90.1-2004 Appendix-Table A3-1B
|
|
MediumRough, !- Roughness
|
|
0.2032, !- Thickness {m}
|
|
2.31, !- Conductivity {W/m-K}
|
|
2322, !- Density {kg/m3}
|
|
832; !- Specific Heat {J/kg-K}
|
|
|
|
Material,
|
|
100mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B
|
|
MediumRough, !- Roughness
|
|
0.1016, !- Thickness {m}
|
|
2.31, !- Conductivity {W/m-K}
|
|
2322, !- Density {kg/m3}
|
|
832; !- Specific Heat {J/kg-K}
|
|
|
|
Material,
|
|
150mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B
|
|
MediumRough, !- Roughness
|
|
0.1524, !- Thickness {m}
|
|
2.31, !- Conductivity {W/m-K}
|
|
2322, !- Density {kg/m3}
|
|
832; !- Specific Heat {J/kg-K}
|
|
|
|
Material,
|
|
200mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B
|
|
MediumRough, !- Roughness
|
|
0.2032, !- Thickness {m}
|
|
2.31, !- Conductivity {W/m-K}
|
|
2322, !- Density {kg/m3}
|
|
832; !- Specific Heat {J/kg-K}
|
|
|
|
Material,
|
|
M10 200mm concrete block wall, !- Name
|
|
MediumRough, !- Roughness
|
|
0.2032, !- Thickness {m}
|
|
0.72, !- Conductivity {W/m-K}
|
|
800, !- Density {kg/m3}
|
|
832; !- Specific Heat {J/kg-K}
|
|
|
|
Material,
|
|
M10 200mm concrete block basement wall, !- Name
|
|
MediumRough, !- Roughness
|
|
0.2032, !- Thickness {m}
|
|
1.326, !- Conductivity {W/m-K}
|
|
1842, !- Density {kg/m3}
|
|
912; !- Specific Heat {J/kg-K}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Material:NoMass,
|
|
CP02 CARPET PAD, !- Name
|
|
VeryRough, !- Roughness
|
|
0.21648, !- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.8; !- Visible Absorptance
|
|
|
|
|
|
Material:NoMass,
|
|
Air_Wall_Material, !- Name
|
|
Rough, !- Roughness
|
|
0.2079491, !- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7; !- Solar Absorptance
|
|
|
|
|
|
Material:NoMass,
|
|
Nonres_Roof_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
5.30668495131472,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Absorptance:Thermal
|
|
0.7, !- Absorptance:Solar
|
|
0.7; !- Absorptance:Visible
|
|
|
|
Material:NoMass,
|
|
Res_Roof_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0299387330245182,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
Semiheated_Roof_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0299387330245182,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
|
|
|
|
Material:NoMass,
|
|
Nonres_Exterior_Wall_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
3.21036415428069,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
Res_Exterior_Wall_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0299387330245182,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
Semiheated_Exterior_Wall_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0299387330245182,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
|
|
|
|
Material:NoMass,
|
|
Nonres_Floor_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
|
|
0.0299387330245182,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
Res_Floor_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
|
|
0.0299387330245182,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
Semiheated_Floor_Insulation, !- Name
|
|
MediumSmooth, !- Roughness
|
|
|
|
0.0299387330245182,
|
|
!- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Material:NoMass,
|
|
Std Opaque Door Panel, !- Name
|
|
MediumRough, !- Roughness
|
|
0.123456790123457, !- (corresponds to default RSI-0.12327 or R-0.7) Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CONSTRUCTION ===========
|
|
|
|
Construction,
|
|
InteriorFurnishings, !- Name
|
|
Std Wood 6inch; !- Outside Layer
|
|
|
|
Construction,
|
|
Air_Wall, !- Name
|
|
Air_Wall_Material; !- Outside Layer
|
|
|
|
Construction,
|
|
DropCeiling, !- Name
|
|
AC02 Acoustic Ceiling; !- Outside Layer
|
|
|
|
Construction,
|
|
OpaqueDoor, !- Name
|
|
Std Opaque Door Panel; !- Outside Layer
|
|
|
|
Construction,
|
|
AtticRoofDeck, !- Name
|
|
F12 Asphalt shingles, !- Outside Layer
|
|
G02 16mm plywood; !- Layer 2
|
|
|
|
Construction,
|
|
int_wall, !- Name
|
|
G01 13mm gypsum board, !- Outside Layer
|
|
G01 13mm gypsum board; !- Layer 2
|
|
|
|
Construction,
|
|
ext_slab_8in_with_carpet,!- Name
|
|
200mm Normalweight concrete floor, !- Outside Layer
|
|
CP02 CARPET PAD; !- Layer 2
|
|
|
|
Construction,
|
|
ext_slab_8in, !- Name
|
|
200mm Normalweight concrete floor; !- Outside Layer
|
|
|
|
Construction,
|
|
ext_slab_6in_with_carpet,!- Name
|
|
150mm Normalweight concrete floor, !- Outside Layer
|
|
CP02 CARPET PAD; !- Layer 2
|
|
|
|
Construction,
|
|
ext_slab_6in, !- Name
|
|
150mm Normalweight concrete floor; !- Outside Layer
|
|
|
|
Construction,
|
|
int_slab_floor, !- Name
|
|
100mm Normalweight concrete floor, !- Outside Layer
|
|
CP02 CARPET PAD; !- Layer 2
|
|
|
|
Construction,
|
|
int_slab_ceiling, !- Name
|
|
CP02 CARPET PAD, !- Outside Layer
|
|
100mm Normalweight concrete floor; !- Layer 2
|
|
|
|
Construction,
|
|
basement_wall, !- Name
|
|
M10 200mm concrete block basement wall; !- Outside Layer
|
|
|
|
Construction,
|
|
int_wood_floor, !- Name
|
|
AC02 Acoustic Ceiling, !- Outside Layer
|
|
G02 16mm plywood, !- Layer 2
|
|
CP02 CARPET PAD; !- Layer 3
|
|
|
|
Construction,
|
|
ext_soffit_floor, !- Name
|
|
G02 16mm plywood; !- Outside Layer
|
|
|
|
Construction,
|
|
nonres_roof, !- Name
|
|
F13 Built-up roofing, !- Outside Layer
|
|
Nonres_Roof_Insulation, !- Layer #2
|
|
F08 Metal surface; !- Layer #3
|
|
|
|
|
|
Construction,
|
|
res_roof, !- Name
|
|
F13 Built-up roofing, !- Outside Layer
|
|
Res_Roof_Insulation, !- Layer #2
|
|
F08 Metal surface; !- Layer #3
|
|
|
|
|
|
Construction,
|
|
semiheated_roof, !- Name
|
|
F13 Built-up roofing, !- Outside Layer
|
|
Semiheated_Roof_Insulation, !- Layer #2
|
|
F08 Metal surface; !- Layer #3
|
|
|
|
|
|
|
|
|
|
Construction,
|
|
nonres_ext_wall, !- Name
|
|
F07 25mm stucco, !- Outside Layer
|
|
G01 16mm gypsum board, !- Layer #2
|
|
Nonres_Exterior_Wall_Insulation, !- Layer #3
|
|
G01 16mm gypsum board; !- Layer #4
|
|
|
|
|
|
Construction,
|
|
res_ext_wall, !- Name
|
|
F07 25mm stucco, !- Outside Layer
|
|
G01 16mm gypsum board, !- Layer #1
|
|
Res_Exterior_Wall_Insulation, !- Layer #2
|
|
G01 16mm gypsum board; !- Layer #3
|
|
|
|
|
|
Construction,
|
|
semiheated_ext_wall, !- Name
|
|
F07 25mm stucco, !- Outside Layer
|
|
G01 16mm gypsum board, !- Layer #1
|
|
Semiheated_Exterior_Wall_Insulation, !- Layer #2
|
|
G01 16mm gypsum board; !- Layer #3
|
|
|
|
|
|
Construction,
|
|
nonres_floor, !- Name
|
|
Nonres_Floor_Insulation, !- Outside Layer
|
|
100mm Normalweight concrete floor, !- Layer #1
|
|
CP02 CARPET PAD; !- Layer #2
|
|
|
|
|
|
Construction,
|
|
res_floor, !- Name
|
|
Res_Floor_Insulation, !- Outside Layer
|
|
100mm Normalweight concrete floor, !- Layer #1
|
|
CP02 CARPET PAD; !- Layer #2
|
|
|
|
|
|
Construction,
|
|
semiheated_floor, !- Name
|
|
Semiheated_Floor_Insulation, !- Outside Layer
|
|
100mm Normalweight concrete floor, !- Layer #1
|
|
CP02 CARPET PAD; !- Layer #2
|
|
|
|
|
|
Construction,
|
|
nonres_floor_ceiling, !- Name - reverse ordered layers for nonres_floor
|
|
CP02 CARPET PAD, !- Outside Layer
|
|
100mm Normalweight concrete floor, !- Layer #1
|
|
Nonres_Floor_Insulation; !- Layer #2
|
|
|
|
Construction,
|
|
res_floor_ceiling, !- Name - reverse ordered layers for res_floor
|
|
CP02 CARPET PAD, !- Outside Layer
|
|
100mm Normalweight concrete floor, !- Layer #1
|
|
Res_Floor_Insulation; !- Layer #2
|
|
|
|
Construction,
|
|
semiheated_floor_ceiling, !- Name - reverse ordered layers for semiheated_floor
|
|
CP02 CARPET PAD, !- Outside Layer
|
|
100mm Normalweight concrete floor, !- Layer #1
|
|
Semiheated_Floor_Insulation; !- Layer #2
|
|
|
|
|
|
|
|
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: WINDOWMATERIAL:SIMPLEGLAZINGSYSTEM ===========
|
|
|
|
WindowMaterial:SimpleGlazingSystem,
|
|
Glazing Layer, !- Name
|
|
1.9306084, !- U-Factor {W/m2-K}
|
|
0.38, !- Solar Heat Gain Coefficient
|
|
0.418; !- Visible Transmittance
|
|
Construction,
|
|
Window_U_0.34_SHGC_0.38, !- Name
|
|
Glazing Layer; !- Outside Layer
|
|
|
|
|
|
Construction:FfactorGroundFloor,
|
|
Perimeter_bot_ZN_1_Floor_Ffactor, !- Name
|
|
0.88281, !- F-Factor
|
|
207.33814098, !- Area
|
|
49.911; !- PerimeterExposed
|
|
|
|
Construction:FfactorGroundFloor,
|
|
Perimeter_bot_ZN_2_Floor_Ffactor, !- Name
|
|
0.88281, !- F-Factor
|
|
131.26219410000022, !- Area
|
|
33.2738; !- PerimeterExposed
|
|
|
|
Construction:FfactorGroundFloor,
|
|
Perimeter_bot_ZN_3_Floor_Ffactor, !- Name
|
|
0.88281, !- F-Factor
|
|
207.33814097999993, !- Area
|
|
49.911; !- PerimeterExposed
|
|
|
|
Construction:FfactorGroundFloor,
|
|
Perimeter_bot_ZN_4_Floor_Ffactor, !- Name
|
|
0.88281, !- F-Factor
|
|
131.25358392, !- Area
|
|
33.2738; !- PerimeterExposed
|
|
|
|
Construction:FfactorGroundFloor,
|
|
Core_bot_ZN_5_Floor_Ffactor, !- Name
|
|
0.88281, !- F-Factor
|
|
983.5365718200002, !- Area
|
|
0; !- PerimeterExposed
|
|
|
|
|
|
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ZONE ===========
|
|
|
|
Zone,
|
|
Core_bottom, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
2.7432, !- Ceiling Height {m}
|
|
autocalculate, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
YES; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
TopFloor_Plenum, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
1.2192, !- Ceiling Height {m}
|
|
autocalculate, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
No; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
MidFloor_Plenum, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
1.2192, !- Ceiling Height {m}
|
|
autocalculate, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
No; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
FirstFloor_Plenum, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
1.2192, !- Ceiling Height {m}
|
|
autocalculate, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
No; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Core_mid, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
2.7432, !- Ceiling Height {m}
|
|
autocalculate, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
YES; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Core_top, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
2.7432, !- Ceiling Height {m}
|
|
autocalculate, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
YES; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Perimeter_top_ZN_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
2.7432, !- Ceiling Height {m}
|
|
autocalculate, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
YES; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Perimeter_top_ZN_2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
2.7432, !- Ceiling Height {m}
|
|
autocalculate, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
YES; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Perimeter_top_ZN_1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
2.7432, !- Ceiling Height {m}
|
|
autocalculate, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
YES; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Perimeter_top_ZN_4, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
2.7432, !- Ceiling Height {m}
|
|
autocalculate, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
YES; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Perimeter_bot_ZN_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
2.7432, !- Ceiling Height {m}
|
|
autocalculate, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
YES; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Perimeter_bot_ZN_2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
2.7432, !- Ceiling Height {m}
|
|
autocalculate, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
YES; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Perimeter_bot_ZN_1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
2.7432, !- Ceiling Height {m}
|
|
autocalculate, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
YES; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Perimeter_bot_ZN_4, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
2.7432, !- Ceiling Height {m}
|
|
autocalculate, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
YES; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Perimeter_mid_ZN_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
2.7432, !- Ceiling Height {m}
|
|
autocalculate, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
YES; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Perimeter_mid_ZN_2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
2.7432, !- Ceiling Height {m}
|
|
autocalculate, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
YES; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Perimeter_mid_ZN_1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
2.7432, !- Ceiling Height {m}
|
|
autocalculate, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
YES; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Perimeter_mid_ZN_4, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1.0000, !- Multiplier
|
|
2.7432, !- Ceiling Height {m}
|
|
autocalculate, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
YES; !- Part of Total Floor Area
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SURFACEGEOMETRY ===========
|
|
|
|
GlobalGeometryRules,
|
|
ULC, !- Starting Vertex Position
|
|
Counterclockwise, !- Vertex Entry Direction
|
|
Relative; !- Coordinate System
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SURFACE:HEATTRANSFER ===========
|
|
|
|
|
|
BuildingSurface:Detailed,
|
|
Building_Roof, !- Name
|
|
Roof, !- Surface Type
|
|
nonres_roof, !- Construction Name
|
|
TopFloor_Plenum, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911000,0.000000,11.887200, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.911000,33.273800,11.887200, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.000000,33.273800,11.887200, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000000,0.000000,11.887200; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_1_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Perimeter_bot_ZN_1, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
FirstFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,0.0000,2.7432, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.3375,4.5732,2.7432, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,2.7432, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,2.7432; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_2_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Perimeter_bot_ZN_2, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
FirstFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,33.2738,2.7432, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.3375,28.7006,2.7432, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,4.5732,2.7432, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911,0.0000,2.7432; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Perimeter_bot_ZN_3, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
FirstFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,33.2738,2.7432, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,28.7006,2.7432, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,28.7006,2.7432, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911,33.2738,2.7432; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_4_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Perimeter_bot_ZN_4, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
FirstFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,2.7432, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,2.7432, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,28.7006,2.7432, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,33.2738,2.7432; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_bot_ZN_5_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Core_bottom, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
FirstFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,28.7006,2.7432, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,2.7432, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,4.5732,2.7432, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.3375,28.7006,2.7432; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_1_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Perimeter_mid_ZN_1, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
MidFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,0.0000,6.7056, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.3375,4.5732,6.7056, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,6.7056, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,6.7056; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_2_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Perimeter_mid_ZN_2, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
MidFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,33.2738,6.7056, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.3375,28.7006,6.7056, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,4.5732,6.7056, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911,0.0000,6.7056; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Perimeter_mid_ZN_3, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
MidFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,33.2738,6.7056, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,28.7006,6.7056, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,28.7006,6.7056, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911,33.2738,6.7056; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_4_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Perimeter_mid_ZN_4, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
MidFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,6.7056, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,6.7056, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,28.7006,6.7056, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,33.2738,6.7056; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_mid_ZN_5_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Core_mid, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
MidFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,28.7006,6.7056, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,6.7056, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,4.5732,6.7056, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.3375,28.7006,6.7056; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_1_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Perimeter_top_ZN_1, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
TopFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,10.668, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.911,0.0000,10.668, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,4.5732,10.668, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,10.668; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_2_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Perimeter_top_ZN_2, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
TopFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,0.0000,10.668, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.911,33.2738,10.668, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,28.7006,10.668, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.3375,4.5732,10.668; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Perimeter_top_ZN_3, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
TopFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,33.2738,10.668, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,33.2738,10.668, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,28.7006,10.668, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.3375,28.7006,10.668; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_4_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Perimeter_top_ZN_4, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
TopFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,33.2738,10.668, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,10.668, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,10.668, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,28.7006,10.668; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_top_ZN_5_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Core_top, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
TopFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
45.3375,4.5732,10.668, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.3375,28.7006,10.668, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,28.7006,10.668, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,10.668; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_1_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
Perimeter_bot_ZN_1_Floor_Ffactor, !- Construction Name
|
|
Perimeter_bot_ZN_1, !- Zone Name
|
|
GroundFCfactorMethod, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_2_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
Perimeter_bot_ZN_2_Floor_Ffactor, !- Construction Name
|
|
Perimeter_bot_ZN_2, !- Zone Name
|
|
GroundFCfactorMethod, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.3375,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,28.7006,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911,33.2738,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_3_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
Perimeter_bot_ZN_3_Floor_Ffactor, !- Construction Name
|
|
Perimeter_bot_ZN_3, !- Zone Name
|
|
GroundFCfactorMethod, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,33.2738,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.3375,28.7006,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,28.7006,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,33.2738,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_4_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
Perimeter_bot_ZN_4_Floor_Ffactor, !- Construction Name
|
|
Perimeter_bot_ZN_4, !- Zone Name
|
|
GroundFCfactorMethod, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,33.2738,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,28.7006,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_bot_ZN_5_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
Core_bot_ZN_5_Floor_Ffactor, !- Construction Name
|
|
Core_bottom, !- Zone Name
|
|
Adiabatic, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
45.3375,28.7006,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.3375,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,28.7006,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_1_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
int_slab_floor, !- Construction Name
|
|
Perimeter_mid_ZN_1, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
FirstFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,4.5732,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911,0.0000,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_2_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
int_slab_floor, !- Construction Name
|
|
Perimeter_mid_ZN_2, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
FirstFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,0.0000,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.3375,4.5732,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,28.7006,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911,33.2738,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_3_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
int_slab_floor, !- Construction Name
|
|
Perimeter_mid_ZN_3, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
FirstFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,33.2738,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.3375,28.7006,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,28.7006,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,33.2738,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_4_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
int_slab_floor, !- Construction Name
|
|
Perimeter_mid_ZN_4, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
FirstFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,33.2738,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,28.7006,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_mid_ZN_5_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
int_slab_floor, !- Construction Name
|
|
Core_mid, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
FirstFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
45.3375,28.7006,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.3375,4.5732,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,28.7006,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_1_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
int_slab_floor, !- Construction Name
|
|
Perimeter_top_ZN_1, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
MidFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,7.9248, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,7.9248, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911,0.0000,7.9248; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_2_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
int_slab_floor, !- Construction Name
|
|
Perimeter_top_ZN_2, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
MidFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,0.0000,7.9248, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.3375,4.5732,7.9248, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,28.7006,7.9248, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911,33.2738,7.9248; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_3_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
int_slab_floor, !- Construction Name
|
|
Perimeter_top_ZN_3, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
MidFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,33.2738,7.9248, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.3375,28.7006,7.9248, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,28.7006,7.9248, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,33.2738,7.9248; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_4_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
int_slab_floor, !- Construction Name
|
|
Perimeter_top_ZN_4, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
MidFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,33.2738,7.9248, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,28.7006,7.9248, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,7.9248; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_top_ZN_5_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
int_slab_floor, !- Construction Name
|
|
Core_top, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
MidFloor_Plenum, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
45.3375,28.7006,7.9248, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.3375,4.5732,7.9248, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,28.7006,7.9248; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_1_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Perimeter_bot_ZN_1, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,2.7432, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
49.911,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911,0.0000,2.7432; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_1_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Perimeter_bot_ZN_1, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,0.0000,2.7432, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.911,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.3375,4.5732,2.7432; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_2_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Perimeter_bot_ZN_2, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,0.0000,2.7432, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.911,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
49.911,33.2738,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911,33.2738,2.7432; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_2_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Perimeter_bot_ZN_2, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,33.2738,2.7432, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.911,33.2738,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,28.7006,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.3375,28.7006,2.7432; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_3_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Perimeter_bot_ZN_3, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,33.2738,2.7432, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.911,33.2738,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,33.2738,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,33.2738,2.7432; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_3_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Perimeter_bot_ZN_3, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,33.2738,2.7432, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,33.2738,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,28.7006,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,28.7006,2.7432; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_4_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Perimeter_bot_ZN_4, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,33.2738,2.7432, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,33.2738,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,2.7432; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_4_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Perimeter_bot_ZN_4, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,2.7432, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,2.7432; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_bot_ZN_5_Wall_South,!- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Core_bottom, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,4.5732,2.7432, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.3375,4.5732,2.7432; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_bot_ZN_5_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Core_bottom, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
45.3375,4.5732,2.7432, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.3375,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,28.7006,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.3375,28.7006,2.7432; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_bot_ZN_5_Wall_North,!- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Core_bottom, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
45.3375,28.7006,2.7432, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.3375,28.7006,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,28.7006,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,28.7006,2.7432; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_bot_ZN_5_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Core_bottom, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,28.7006,2.7432, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,28.7006,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,2.7432; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_1_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Perimeter_mid_ZN_1, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,6.7056, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
49.911,0.0000,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911,0.0000,6.7056; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_1_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Perimeter_mid_ZN_1, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,0.0000,6.7056, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.911,0.0000,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,4.5732,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.3375,4.5732,6.7056; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_2_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Perimeter_mid_ZN_2, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,0.0000,6.7056, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.911,0.0000,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
49.911,33.2738,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911,33.2738,6.7056; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_2_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Perimeter_mid_ZN_2, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,33.2738,6.7056, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.911,33.2738,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,28.7006,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.3375,28.7006,6.7056; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_3_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Perimeter_mid_ZN_3, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,33.2738,6.7056, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.911,33.2738,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,33.2738,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,33.2738,6.7056; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_3_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Perimeter_mid_ZN_3, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,33.2738,6.7056, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,33.2738,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,28.7006,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,28.7006,6.7056; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_4_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Perimeter_mid_ZN_4, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,33.2738,6.7056, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,33.2738,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,6.7056; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_4_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Perimeter_mid_ZN_4, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,6.7056, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,6.7056; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_mid_ZN_5_Wall_North,!- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Core_mid, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
45.3375,28.7006,6.7056, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.3375,28.7006,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,28.7006,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,28.7006,6.7056; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_mid_ZN_5_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Core_mid, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
45.3375,4.5732,6.7056, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.3375,4.5732,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,28.7006,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.3375,28.7006,6.7056; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_mid_ZN_5_Wall_South,!- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Core_mid, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,4.5732,6.7056, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,4.5732,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.3375,4.5732,6.7056; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_mid_ZN_5_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Core_mid, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,28.7006,6.7056, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,28.7006,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,6.7056; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_1_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Perimeter_top_ZN_1, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,10.668, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,7.9248, !- X,Y,Z ==> Vertex 2 {m}
|
|
49.911,0.0000,7.9248, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911,0.0000,10.668; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_1_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Perimeter_top_ZN_1, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,0.0000,10.668, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.911,0.0000,7.9248, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.3375,4.5732,10.668; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_2_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Perimeter_top_ZN_2, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,0.0000,10.668, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.911,0.0000,7.9248, !- X,Y,Z ==> Vertex 2 {m}
|
|
49.911,33.2738,7.9248, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911,33.2738,10.668; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_2_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Perimeter_top_ZN_2, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,33.2738,10.668, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.911,33.2738,7.9248, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,28.7006,7.9248, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.3375,28.7006,10.668; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_3_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Perimeter_top_ZN_3, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,33.2738,10.668, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.911,33.2738,7.9248, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,33.2738,7.9248, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,33.2738,10.668; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_3_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Perimeter_top_ZN_3, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,33.2738,10.668, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,33.2738,7.9248, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,28.7006,7.9248, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,28.7006,10.668; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_4_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
Perimeter_top_ZN_4, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,33.2738,10.668, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,33.2738,7.9248, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,7.9248, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,10.668; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_4_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Perimeter_top_ZN_4, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,10.668, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,7.9248, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,10.668; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_top_ZN_5_Wall_North,!- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Core_top, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
45.3375,28.7006,10.668, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.3375,28.7006,7.9248, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,28.7006,7.9248, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,28.7006,10.668; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_top_ZN_5_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Core_top, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
45.3375,4.5732,10.668, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.3375,4.5732,7.9248, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,28.7006,7.9248, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.3375,28.7006,10.668; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_top_ZN_5_Wall_South,!- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Core_top, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,4.5732,10.668, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,7.9248, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.3375,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.3375,4.5732,10.668; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_top_ZN_5_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int_wall, !- Construction Name
|
|
Core_top, !- Zone Name
|
|
Zone, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,28.7006,10.668, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,28.7006,7.9248, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,10.668; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_Plenum_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
FirstFloor_Plenum, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,33.2738,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.911,33.2738,2.7432, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,33.2738,2.7432, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,33.2738,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_Plenum_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
FirstFloor_Plenum, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,0.0000,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.911,0.0000,2.7432, !- X,Y,Z ==> Vertex 2 {m}
|
|
49.911,33.2738,2.7432, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911,33.2738,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_Plenum_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
FirstFloor_Plenum, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,2.7432, !- X,Y,Z ==> Vertex 2 {m}
|
|
49.911,0.0000,2.7432, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911,0.0000,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_Plenum_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
FirstFloor_Plenum, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,33.2738,3.9624, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,33.2738,2.7432, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,2.7432, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.9624; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_Plenum_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
MidFloor_Plenum, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,33.2738,7.9248, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.911,33.2738,6.7056, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,33.2738,6.7056, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,33.2738,7.9248; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_Plenum_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
MidFloor_Plenum, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,0.0000,7.9248, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.911,0.0000,6.7056, !- X,Y,Z ==> Vertex 2 {m}
|
|
49.911,33.2738,6.7056, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911,33.2738,7.9248; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_Plenum_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
MidFloor_Plenum, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,7.9248, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,6.7056, !- X,Y,Z ==> Vertex 2 {m}
|
|
49.911,0.0000,6.7056, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911,0.0000,7.9248; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_Plenum_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
MidFloor_Plenum, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,33.2738,7.9248, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,33.2738,6.7056, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,6.7056, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,7.9248; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_Plenum_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
TopFloor_Plenum, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,33.2738,11.8872, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.911,33.2738,10.668, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,33.2738,10.668, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,33.2738,11.8872; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_Plenum_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
TopFloor_Plenum, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
49.911,0.0000,11.8872, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.911,0.0000,10.668, !- X,Y,Z ==> Vertex 2 {m}
|
|
49.911,33.2738,10.668, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911,33.2738,11.8872; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_Plenum_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
TopFloor_Plenum, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,11.8872, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,10.668, !- X,Y,Z ==> Vertex 2 {m}
|
|
49.911,0.0000,10.668, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911,0.0000,11.8872; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_Plenum_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
nonres_ext_wall, !- Construction Name
|
|
TopFloor_Plenum, !- Zone Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,33.2738,11.8872, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,33.2738,10.668, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,10.668, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,11.8872; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SURFACE:HEATTRANSFER:SUB ===========
|
|
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_bot_ZN_1_Wall_South_Window1, !- Name
|
|
Window, !- Surface Type
|
|
Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface
|
|
Perimeter_bot_ZN_1_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000000000000,0.000000000000,2.329300000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.95455007488, !- X,Y,Z ==> Vertex 2 {m}
|
|
15.8242,0.0000,0.95455007488, !- X,Y,Z ==> Vertex 3 {m}
|
|
15.824200000000,0.000000000000,2.329300000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_bot_ZN_1_Wall_South_Window2, !- Name
|
|
Window, !- Surface Type
|
|
Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface
|
|
Perimeter_bot_ZN_1_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
17.043400000000,0.000000000000,2.329300000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
17.0434,0.0000,0.95455007488, !- X,Y,Z ==> Vertex 2 {m}
|
|
32.8676,0.0000,0.95455007488, !- X,Y,Z ==> Vertex 3 {m}
|
|
32.867600000000,0.000000000000,2.329300000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_bot_ZN_1_Wall_South_Window3, !- Name
|
|
Window, !- Surface Type
|
|
Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface
|
|
Perimeter_bot_ZN_1_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
34.086800000000,0.000000000000,2.329300000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
34.0868,0.0000,0.95455007488, !- X,Y,Z ==> Vertex 2 {m}
|
|
49.9100,0.0000,0.95455007488, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.910000000000,0.000000000000,2.329300000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_bot_ZN_1_Wall_South_Door1, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door_con, !- Construction Name
|
|
Perimeter_bot_ZN_1_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
15.982594238416,0.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
15.982594238416,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
16.896994238416,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
16.896994238416,0.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_bot_ZN_1_Wall_South_Door2, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door_con, !- Construction Name
|
|
Perimeter_bot_ZN_1_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
33.011303488322,0.000000000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
33.011303488322,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
33.925703488322,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
33.925703488322,0.000000000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_bot_ZN_3_Wall_North_Window1, !- Name
|
|
Window, !- Surface Type
|
|
Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface
|
|
Perimeter_bot_ZN_3_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
49.910000000000,33.273800000000,2.329300000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.9100,33.2738,0.95455007488, !- X,Y,Z ==> Vertex 2 {m}
|
|
34.0868,33.2738,0.95455007488, !- X,Y,Z ==> Vertex 3 {m}
|
|
34.086800000000,33.273800000000,2.329300000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_bot_ZN_3_Wall_North_Window2, !- Name
|
|
Window, !- Surface Type
|
|
Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface
|
|
Perimeter_bot_ZN_3_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
32.867600000000,33.273800000000,2.329300000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
32.8676,33.2738,0.95455007488, !- X,Y,Z ==> Vertex 2 {m}
|
|
17.0434,33.2738,0.95455007488, !- X,Y,Z ==> Vertex 3 {m}
|
|
17.043400000000,33.273800000000,2.329300000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_bot_ZN_3_Wall_North_Window3, !- Name
|
|
Window, !- Surface Type
|
|
Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface
|
|
Perimeter_bot_ZN_3_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
15.824200000000,33.273800000000,2.329300000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
15.8242,33.2738,0.95455007488, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,33.2738,0.95455007488, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000000000000,33.273800000000,2.329300000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_bot_ZN_3_Wall_North_Door1, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door_con, !- Construction Name
|
|
Perimeter_bot_ZN_3_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
33.944687903038,33.273800000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
33.944687903038,33.273800000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
33.030287903038,33.273800000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
33.030287903038,33.273800000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_bot_ZN_3_Wall_North_Door2, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door_con, !- Construction Name
|
|
Perimeter_bot_ZN_3_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
16.843341472948,33.273800000000,2.133600000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
16.843341472948,33.273800000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
15.928941472948,33.273800000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
15.928941472948,33.273800000000,2.133600000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_bot_ZN_2_Wall_East_Window1, !- Name
|
|
Window, !- Surface Type
|
|
Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface
|
|
Perimeter_bot_ZN_2_Wall_East, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
49.911000000000,0.000000000000,2.329300000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.9110,0.0000,0.97196720032, !- X,Y,Z ==> Vertex 2 {m}
|
|
49.9110,30.8353,0.97196720032, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911000000000,30.835300000000,2.329300000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_bot_ZN_2_Wall_East_Window2, !- Name
|
|
Window, !- Surface Type
|
|
Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface
|
|
Perimeter_bot_ZN_2_Wall_East, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
49.911000000000,32.054500000000,2.329300000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.9110,32.0545,0.97196720032, !- X,Y,Z ==> Vertex 2 {m}
|
|
49.9110,33.2737,0.97196720032, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911000000000,33.273700000000,2.329300000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_bot_ZN_2_Wall_East_Door, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door_con, !- Construction Name
|
|
Perimeter_bot_ZN_2_Wall_East, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
49.911000000000,30.985198503573,2.133600000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.911000000000,30.985198503573,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
49.911000000000,31.899598503573,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911000000000,31.899598503573,2.133600000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_bot_ZN_4_Wall_West_Window1, !- Name
|
|
Window, !- Surface Type
|
|
Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface
|
|
Perimeter_bot_ZN_4_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000000000000,33.273700000000,2.329300000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,33.2737,0.97196720032, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,2.4384,0.97196720032, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000000000000,2.438400000000,2.329300000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_bot_ZN_4_Wall_West_Window2, !- Name
|
|
Window, !- Surface Type
|
|
Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface
|
|
Perimeter_bot_ZN_4_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000000000000,1.219200000000,2.329300000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,1.2192,0.97196720032, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.97196720032, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000000000000,0.000000000000,2.329300000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_bot_ZN_4_Wall_West_Door, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door_con, !- Construction Name
|
|
Perimeter_bot_ZN_4_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000000000000,2.279591323208,2.133600000000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.000000000000,2.279591323208,0.000000000000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.000000000000,1.365191323208,0.000000000000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000000000000,1.365191323208,2.133600000000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_mid_ZN_1_Wall_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface
|
|
Perimeter_mid_ZN_1_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000,0.0000,6.2917, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.000,0.0000,4.984108, !- X,Y,Z ==> Vertex 2 {m}
|
|
49.91,0.0000,4.984108, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.91,0.0000,6.2917; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_mid_ZN_2_Wall_East_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface
|
|
Perimeter_mid_ZN_2_Wall_East, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
49.911,0.0000,6.2917, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.911,0.0000,4.984108, !- X,Y,Z ==> Vertex 2 {m}
|
|
49.911,33.2737,4.984108, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911,33.2737,6.2917; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_mid_ZN_3_Wall_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface
|
|
Perimeter_mid_ZN_3_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
49.91,33.2738,6.2917, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.91,33.2738,4.984108, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.000,33.2738,4.984108, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000,33.2738,6.2917; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_mid_ZN_4_Wall_West_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface
|
|
Perimeter_mid_ZN_4_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000,33.2737,6.2917, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.000,33.2737,4.984108, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.000,0.0000,4.984108, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000,0.0000,6.2917; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_top_ZN_1_Wall_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface
|
|
Perimeter_top_ZN_1_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000,0.0000,10.2541, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.000,0.0000,8.946508, !- X,Y,Z ==> Vertex 2 {m}
|
|
49.91,0.0000,8.946508, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.91,0.0000,10.2541; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_top_ZN_2_Wall_East_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface
|
|
Perimeter_top_ZN_2_Wall_East, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
49.911,0.0000,10.2541, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.911,0.0000,8.946508, !- X,Y,Z ==> Vertex 2 {m}
|
|
49.911,33.2737,8.946508, !- X,Y,Z ==> Vertex 3 {m}
|
|
49.911,33.2737,10.2541; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_top_ZN_3_Wall_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface
|
|
Perimeter_top_ZN_3_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
49.91,33.2738,10.2541, !- X,Y,Z ==> Vertex 1 {m}
|
|
49.91,33.2738,8.946508, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.000,33.2738,8.946508, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000,33.2738,10.2541; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_top_ZN_4_Wall_West_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window_U_0.34_SHGC_0.38, !- Construction Name of the Surface
|
|
Perimeter_top_ZN_4_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000,33.2737,10.2541, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.000,33.2737,8.946508, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.000,0.0000,8.946508, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000,0.0000,10.2541; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SURFACE:HEATTRANSFER:INTERNALMASS ===========
|
|
|
|
InternalMass,
|
|
Core_bottom_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Core_bottom, !- Zone Name
|
|
1967.0770; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Core_mid_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Core_mid, !- Zone Name
|
|
1967.0770; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Core_top_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Core_top, !- Zone Name
|
|
1967.0770; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Perimeter_top_ZN_3_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Perimeter_top_ZN_3, !- Zone Name
|
|
414.6750; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Perimeter_top_ZN_2_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Perimeter_top_ZN_2, !- Zone Name
|
|
262.5073; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Perimeter_top_ZN_1_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Perimeter_top_ZN_1, !- Zone Name
|
|
414.6723; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Perimeter_top_ZN_4_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Perimeter_top_ZN_4, !- Zone Name
|
|
262.5056; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Perimeter_bot_ZN_3_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Perimeter_bot_ZN_3, !- Zone Name
|
|
414.6750; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Perimeter_bot_ZN_2_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Perimeter_bot_ZN_2, !- Zone Name
|
|
262.5073; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Perimeter_bot_ZN_1_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Perimeter_bot_ZN_1, !- Zone Name
|
|
414.6723; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Perimeter_bot_ZN_4_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Perimeter_bot_ZN_4, !- Zone Name
|
|
262.5056; !- Surface Area {m2}
|
|
|
|
|
|
|
|
InternalMass,
|
|
Perimeter_mid_ZN_3_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Perimeter_mid_ZN_3, !- Zone Name
|
|
414.6750; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Perimeter_mid_ZN_2_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Perimeter_mid_ZN_2, !- Zone Name
|
|
262.5073; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Perimeter_mid_ZN_1_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Perimeter_mid_ZN_1, !- Zone Name
|
|
414.6723; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Perimeter_mid_ZN_4_InternalMass_1, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Perimeter_mid_ZN_4, !- Zone Name
|
|
262.5056; !- Surface Area {m2}
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SCHEDULETYPE ===========
|
|
|
|
ScheduleTypeLimits,
|
|
Any Number; !- Name
|
|
|
|
ScheduleTypeLimits,
|
|
Fraction, !- Name
|
|
0.0, !- Lower Limit Value
|
|
1.0, !- Upper Limit Value
|
|
Continuous; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Temperature, !- Name
|
|
-60, !- Lower Limit Value
|
|
200, !- Upper Limit Value
|
|
Continuous; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
On/Off, !- Name
|
|
0, !- Lower Limit Value
|
|
1, !- Upper Limit Value
|
|
Discrete; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Control Type, !- Name
|
|
0, !- Lower Limit Value
|
|
4, !- Upper Limit Value
|
|
Discrete; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Humidity, !- Name
|
|
10, !- Lower Limit Value
|
|
90, !- Upper Limit Value
|
|
Continuous; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Number; !- Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SCHEDULE:COMPACT ===========
|
|
|
|
Schedule:Compact,
|
|
Exterior_lighting_schedule_a, !- Name
|
|
fraction, !- Schedule Type Limits Name
|
|
Through:12/31, !- Field 1
|
|
For:AllDays, !- Field 2
|
|
Until: 06:00,0, !- Field 3
|
|
Until: 24:00,1; !- Field 5
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Exterior_lighting_schedule_b, !- Name
|
|
fraction, !- Schedule Type Limits Name
|
|
Through:12/31, !- Field 1
|
|
For:AllDays, !- Field 2
|
|
Until: 06:00,0.7, !- Field 3
|
|
Until: 24:00,1; !- Field 5
|
|
|
|
Schedule:Compact,
|
|
Exterior_lighting_schedule_a_IECC2015, !- Name
|
|
fraction, !- Schedule Type Limits Name
|
|
Through:12/31, !- Field 1
|
|
For:Weekdays SummerDesignDay, !- Field 2
|
|
Until: 07:00,0, !- Field 3
|
|
Until: 22:00,1, !- Field 5
|
|
Until: 24:00,0, !- Field 7
|
|
For:Saturdays, !- Field 9
|
|
Until: 07:00,0, !- Field 10
|
|
Until: 18:00,1, !- Field 12
|
|
Until: 24:00,0, !- Field 14
|
|
For:AllOtherDays, !- Field 16
|
|
Until: 24:00,0; !- Field 17
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Exterior_lighting_schedule_b_2016, !- Name
|
|
fraction, !- Schedule Type Limits Name
|
|
Through:12/31, !- Field 1
|
|
For:AllDays, !- Field 2
|
|
Until: 06:00,0.5, !- Field 3
|
|
Until: 24:00,1; !- Field 5
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Exterior_lighting_schedule_c_2016, !- Name
|
|
fraction, !- Schedule Type Limits Name
|
|
Through:12/31, !- Field 1
|
|
For:AllDays, !- Field 2
|
|
Until: 06:00,0.5, !- Field 3
|
|
Until: 19:00,1, !- Field 5
|
|
Until: 24:00,0.5; !- Field 7
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Hours_of_operation, !- Name
|
|
on/off, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 06:00,0.0, !- Field 3
|
|
Until: 22:00,1.0, !- Field 5
|
|
Until: 24:00,0.0, !- Field 7
|
|
For: Saturday WinterDesignDay, !- Field 9
|
|
Until: 06:00,0.0, !- Field 10
|
|
Until: 18:00,1.0, !- Field 12
|
|
Until: 24:00,0.0, !- Field 14
|
|
For:Sunday Holidays AllOtherDays, !- Field 16
|
|
Until: 24:00,0.0; !- Field 17
|
|
|
|
Schedule:Compact,
|
|
ALWAYS_ON, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Exterior_Lgt_ALWAYS_ON, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Exterior_Lgt_189_1, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through:12/31, !- Field 1
|
|
For:Weekdays, !- Field 2
|
|
Until: 9:00,0.5, !- Field 3
|
|
Until: 24:00,1.0, !- Field 5
|
|
For:Saturday, !- Field 7
|
|
Until: 9:00,0.5, !- Field 8
|
|
Until: 19:00,1.0, !- Field 10
|
|
Until: 24:00,0.5, !- Field 12
|
|
For:Sunday Holidays AllOtherDays, !- Field 14
|
|
Until: 9:00,0.5, !- Field 15
|
|
Until: 18:00,1.0, !- Field 17
|
|
Until: 24:00,0.5; !- Field 19
|
|
|
|
Schedule:Compact,
|
|
ALWAYS_OFF, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.0; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
HVACOperationSchd, !- Name
|
|
on/off, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 06:00,0.0, !- Field 3
|
|
Until: 22:00,1.0, !- Field 5
|
|
Until: 24:00,0.0, !- Field 7
|
|
For: Saturday WinterDesignDay, !- Field 9
|
|
Until: 06:00,0.0, !- Field 10
|
|
Until: 18:00,1.0, !- Field 12
|
|
Until: 24:00,0.0, !- Field 14
|
|
For:Sunday Holidays AllOtherDays, !- Field 16
|
|
Until: 24:00,0.0; !- Field 17
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
BLDG_LIGHT_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 5:00,0.05, !- Field 3
|
|
Until: 6:00,0.1, !- Field 5
|
|
Until: 7:00,0.08623256, !- Field 7
|
|
Until: 8:00,0.25869768, !- Field 9
|
|
Until: 17:00,0.77609304, !- Field 11
|
|
Until: 18:00,0.4311628, !- Field 13
|
|
Until: 20:00,0.25869768, !- Field 15
|
|
Until: 22:00,0.17246512, !- Field 17
|
|
Until: 23:00,0.08623256, !- Field 19
|
|
Until: 24:00,0.04311628, !- Field 21
|
|
For: SummerDesignDay, !- Field 23
|
|
Until: 24:00,1, !- Field 24
|
|
For: Saturday, !- Field 26
|
|
Until: 6:00,0.05, !- Field 27
|
|
Until: 8:00,0.08623256, !- Field 29
|
|
Until: 12:00,0.25869768, !- Field 31
|
|
Until: 17:00,0.12934884, !- Field 33
|
|
Until: 19:00,0.04311628, !- Field 35
|
|
Until: 24:00,0.05, !- Field 37
|
|
For: WinterDesignDay, !- Field 39
|
|
Until: 24:00,0, !- Field 40
|
|
For: Sunday Holidays AllOtherDays, !- Field 42
|
|
Until: 6:00,0.05, !- Field 43
|
|
Until: 18:00,0.04311628, !- Field 45
|
|
Until: 24:00,0.05; !- Field 47
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
BLDG_EQUIP_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 06:00,0.3076738408, !- Field 3
|
|
Until: 08:00,0.381234796, !- Field 5
|
|
Until: 12:00,0.857778291, !- Field 7
|
|
Until: 13:00,0.762469592, !- Field 9
|
|
Until: 17:00,0.857778291, !- Field 11
|
|
Until: 18:00,0.476543495, !- Field 13
|
|
Until: 24:00,0.381234796, !- Field 15
|
|
For: SummerDesignDay, !- Field 17
|
|
Until: 24:00,1.0, !- Field 18
|
|
For: Saturday, !- Field 20
|
|
Until: 06:00,0.2307553806, !- Field 21
|
|
Until: 08:00,0.381234796, !- Field 23
|
|
Until: 12:00,0.476543495, !- Field 25
|
|
Until: 17:00,0.3335804465, !- Field 27
|
|
Until: 19:00,0.285926097, !- Field 29
|
|
Until: 24:00,0.2307553806, !- Field 31
|
|
For: WinterDesignDay, !- Field 33
|
|
Until: 24:00,0.0, !- Field 34
|
|
For: Sunday Holidays AllOtherDays, !- Field 36
|
|
Until: 06:00,0.2307553806, !- Field 37
|
|
Until: 18:00,0.285926097, !- Field 39
|
|
Until: 24:00,0.2307553806; !- Field 41
|
|
|
|
Schedule:Compact,
|
|
BLDG_OCC_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 06:00,0.0, !- Field 3
|
|
Until: 07:00,0.1, !- Field 5
|
|
Until: 08:00,0.2, !- Field 7
|
|
Until: 12:00,0.95, !- Field 9
|
|
Until: 13:00,0.5, !- Field 11
|
|
Until: 17:00,0.95, !- Field 13
|
|
Until: 18:00,0.3, !- Field 15
|
|
Until: 22:00,0.1, !- Field 17
|
|
Until: 24:00,0.05, !- Field 19
|
|
For: SummerDesignDay, !- Field 21
|
|
Until: 06:00,0.000000001,!- Field 22
|
|
Until: 22:00,1.0, !- Field 24
|
|
Until: 24:00,0.05, !- Field 26
|
|
For: Saturday, !- Field 28
|
|
Until: 06:00,0.0, !- Field 29
|
|
Until: 08:00,0.1, !- Field 31
|
|
Until: 12:00,0.3, !- Field 33
|
|
Until: 17:00,0.1, !- Field 35
|
|
Until: 19:00,0.05, !- Field 37
|
|
Until: 24:00,0.0, !- Field 39
|
|
For: WinterDesignDay, !- Field 41
|
|
Until: 24:00,0.0, !- Field 42
|
|
For:Sunday Holidays AllOtherDays, !- Field 44
|
|
Until: 06:00,0.0, !- Field 45
|
|
Until: 18:00,0.05, !- Field 47
|
|
Until: 24:00,0.0; !- Field 49
|
|
|
|
Schedule:Compact,
|
|
BLDG_OCC_SCH_w_SB, !-Name
|
|
Fraction, !-Schedule Type Limits Name
|
|
Through: 12/31,
|
|
For: Weekdays,
|
|
Until: 01:00, 0,
|
|
Until: 02:00, 0,
|
|
Until: 03:00, 0,
|
|
Until: 04:00, 0,
|
|
Until: 05:00, 0,
|
|
Until: 06:00, 0,
|
|
Until: 07:00, 0.1,
|
|
Until: 08:00, 0.2,
|
|
Until: 09:00, 0.95,
|
|
Until: 10:00, 0.95,
|
|
Until: 11:00, 0,
|
|
Until: 12:00, 0.95,
|
|
Until: 13:00, 0,
|
|
Until: 14:00, 0.95,
|
|
Until: 15:00, 0,
|
|
Until: 16:00, 0.95,
|
|
Until: 17:00, 0.95,
|
|
Until: 18:00, 0.3,
|
|
Until: 19:00, 0.1,
|
|
Until: 20:00, 0.1,
|
|
Until: 21:00, 0.1,
|
|
Until: 22:00, 0.1,
|
|
Until: 23:00, 0.05,
|
|
Until: 24:00, 0.05,
|
|
For: Saturday,
|
|
Until: 01:00, 0,
|
|
Until: 02:00, 0,
|
|
Until: 03:00, 0,
|
|
Until: 04:00, 0,
|
|
Until: 05:00, 0,
|
|
Until: 06:00, 0,
|
|
Until: 07:00, 0.1,
|
|
Until: 08:00, 0.1,
|
|
Until: 09:00, 0.3,
|
|
Until: 10:00, 0.3,
|
|
Until: 11:00, 0,
|
|
Until: 12:00, 0.3,
|
|
Until: 13:00, 0,
|
|
Until: 14:00, 0.1,
|
|
Until: 15:00, 0,
|
|
Until: 16:00, 0.1,
|
|
Until: 17:00, 0.1,
|
|
Until: 18:00, 0.05,
|
|
Until: 19:00, 0.05,
|
|
Until: 20:00, 0,
|
|
Until: 21:00, 0,
|
|
Until: 22:00, 0,
|
|
Until: 23:00, 0,
|
|
Until: 24:00, 0,
|
|
For: SummerDesignDay,
|
|
Until: 06:00,0.000000001,
|
|
Until: 22:00,1.0,
|
|
Until: 24:00,0.05,
|
|
For: WinterDesignDay,
|
|
Until: 24:00,0.0,
|
|
For:Sunday Holidays AllOtherDays,
|
|
Until: 06:00,0.0,
|
|
Until: 18:00,0.05,
|
|
Until: 24:00,0.0;
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
BLDG_OCC_SCH_wo_SB, !-Name
|
|
Fraction, !-Schedule Type Limits Name
|
|
Through: 12/31,
|
|
For: Weekdays,
|
|
Until: 01:00, 0,
|
|
Until: 02:00, 0,
|
|
Until: 03:00, 0,
|
|
Until: 04:00, 0,
|
|
Until: 05:00, 0,
|
|
Until: 06:00, 0,
|
|
Until: 07:00, 0.1,
|
|
Until: 08:00, 0.2,
|
|
Until: 09:00, 0.95,
|
|
Until: 10:00, 0.95,
|
|
Until: 11:00, 0.975703226795432,
|
|
Until: 12:00, 0.95,
|
|
Until: 13:00, 0.513528014102859,
|
|
Until: 14:00, 0.95,
|
|
Until: 15:00, 0.975703226795432,
|
|
Until: 16:00, 0.95,
|
|
Until: 17:00, 0.95,
|
|
Until: 18:00, 0.3,
|
|
Until: 19:00, 0.1,
|
|
Until: 20:00, 0.1,
|
|
Until: 21:00, 0.1,
|
|
Until: 22:00, 0.1,
|
|
Until: 23:00, 0.05,
|
|
Until: 24:00, 0.05,
|
|
For: Saturday,
|
|
Until: 01:00, 0,
|
|
Until: 02:00, 0,
|
|
Until: 03:00, 0,
|
|
Until: 04:00, 0,
|
|
Until: 05:00, 0,
|
|
Until: 06:00, 0,
|
|
Until: 07:00, 0.1,
|
|
Until: 08:00, 0.1,
|
|
Until: 09:00, 0.3,
|
|
Until: 10:00, 0.3,
|
|
Until: 11:00, 0.308116808461715,
|
|
Until: 12:00, 0.3,
|
|
Until: 13:00, 0.102705602820572,
|
|
Until: 14:00, 0.1,
|
|
Until: 15:00, 0.102705602820572,
|
|
Until: 16:00, 0.1,
|
|
Until: 17:00, 0.1,
|
|
Until: 18:00, 0.05,
|
|
Until: 19:00, 0.05,
|
|
Until: 20:00, 0,
|
|
Until: 21:00, 0,
|
|
Until: 22:00, 0,
|
|
Until: 23:00, 0,
|
|
Until: 24:00, 0,
|
|
For: SummerDesignDay,
|
|
Until: 06:00,0.000000001,
|
|
Until: 22:00,1.0,
|
|
Until: 24:00,0.05,
|
|
For: WinterDesignDay,
|
|
Until: 24:00,0.0,
|
|
For:Sunday Holidays AllOtherDays,
|
|
Until: 06:00,0.0,
|
|
Until: 18:00,0.05,
|
|
Until: 24:00,0.0;
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
BLDG_ELEVATORS, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay, !- Field 2
|
|
Until: 24:00,0.69, !- Field 3
|
|
For: WinterDesignDay, !- Field 5
|
|
Until: 24:00,0.0, !- Field 6
|
|
For: Weekdays, !- Field 8
|
|
Until: 07:00,0.0, !- Field 9
|
|
Until: 08:00,0.35, !- Field 11
|
|
Until: 09:00,0.69, !- Field 13
|
|
Until: 10:00,0.43, !- Field 15
|
|
Until: 11:00,0.37, !- Field 17
|
|
Until: 12:00,0.43, !- Field 19
|
|
Until: 13:00,0.58, !- Field 21
|
|
Until: 14:00,0.48, !- Field 23
|
|
Until: 15:00,0.37, !- Field 25
|
|
Until: 16:00,0.37, !- Field 27
|
|
Until: 17:00,0.46, !- Field 29
|
|
Until: 18:00,0.62, !- Field 31
|
|
Until: 19:00,0.12, !- Field 33
|
|
Until: 20:00,0.04, !- Field 35
|
|
Until: 21:00,0.04, !- Field 37
|
|
Until: 24:00,0.00, !- Field 39
|
|
For: Saturday, !- Field 41
|
|
Until: 07:00,0.0, !- Field 42
|
|
Until: 08:00,0.16, !- Field 44
|
|
Until: 09:00,0.14, !- Field 46
|
|
Until: 10:00,0.21, !- Field 48
|
|
Until: 11:00,0.18, !- Field 50
|
|
Until: 12:00,0.25, !- Field 52
|
|
Until: 13:00,0.21, !- Field 54
|
|
Until: 14:00,0.13, !- Field 56
|
|
Until: 15:00,0.08, !- Field 58
|
|
Until: 16:00,0.04, !- Field 60
|
|
Until: 17:00,0.05, !- Field 62
|
|
Until: 18:00,0.06, !- Field 64
|
|
Until: 24:00,0.00, !- Field 66
|
|
For:Sunday Holidays AllOtherDays, !- Field 68
|
|
Until: 24:00,0.0; !- Field 69
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
ELEV_LIGHT_FAN_SCH_24_7, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
ELEV_LIGHT_FAN_SCH_ADD_DF, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay, !- Field 2
|
|
Until: 24:00,0.69, !- Field 3
|
|
For: WinterDesignDay, !- Field 5
|
|
Until: 24:00,0.0, !- Field 6
|
|
For: Weekdays, !- Field 8
|
|
Until: 07:00,0.0, !- Field 9
|
|
Until: 08:00,0.35, !- Field 11
|
|
Until: 09:00,0.69, !- Field 13
|
|
Until: 10:00,0.43, !- Field 15
|
|
Until: 11:00,0.37, !- Field 17
|
|
Until: 12:00,0.43, !- Field 19
|
|
Until: 13:00,0.58, !- Field 21
|
|
Until: 14:00,0.48, !- Field 23
|
|
Until: 15:00,0.37, !- Field 25
|
|
Until: 16:00,0.37, !- Field 27
|
|
Until: 17:00,0.46, !- Field 29
|
|
Until: 18:00,0.62, !- Field 31
|
|
Until: 19:00,0.12, !- Field 33
|
|
Until: 20:00,0.04, !- Field 35
|
|
Until: 21:00,0.04, !- Field 37
|
|
Until: 24:00,0.00, !- Field 39
|
|
For: Saturday, !- Field 41
|
|
Until: 07:00,0.0, !- Field 42
|
|
Until: 08:00,0.16, !- Field 44
|
|
Until: 09:00,0.14, !- Field 46
|
|
Until: 10:00,0.21, !- Field 48
|
|
Until: 11:00,0.18, !- Field 50
|
|
Until: 12:00,0.25, !- Field 52
|
|
Until: 13:00,0.21, !- Field 54
|
|
Until: 14:00,0.13, !- Field 56
|
|
Until: 15:00,0.08, !- Field 58
|
|
Until: 16:00,0.04, !- Field 60
|
|
Until: 17:00,0.05, !- Field 62
|
|
Until: 18:00,0.06, !- Field 64
|
|
Until: 24:00,0.00, !- Field 66
|
|
For:Sunday Holidays AllOtherDays, !- Field 68
|
|
Until: 24:00,0.0; !- Field 69
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
BLDG_SWH_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 05:00,0.00, !- Field 3
|
|
Until: 06:00,0.00, !- Field 5
|
|
Until: 07:00,0.07, !- Field 7
|
|
Until: 08:00,0.19, !- Field 9
|
|
Until: 09:00,0.35, !- Field 11
|
|
Until: 10:00,0.38, !- Field 13
|
|
Until: 11:00,0.39, !- Field 15
|
|
Until: 12:00,0.47, !- Field 17
|
|
Until: 13:00,0.57, !- Field 19
|
|
Until: 14:00,0.54, !- Field 21
|
|
Until: 15:00,0.34, !- Field 23
|
|
Until: 16:00,0.33, !- Field 25
|
|
Until: 17:00,0.44, !- Field 27
|
|
Until: 18:00,0.26, !- Field 29
|
|
Until: 19:00,0.21, !- Field 31
|
|
Until: 20:00,0.15, !- Field 33
|
|
Until: 21:00,0.17, !- Field 35
|
|
Until: 22:00,0.08, !- Field 37
|
|
Until: 24:00,0.05, !- Field 39
|
|
For: Saturday WinterDesignDay, !- Field 41
|
|
Until: 05:00,0.00, !- Field 42
|
|
Until: 06:00,0.00, !- Field 44
|
|
Until: 07:00,0.07, !- Field 46
|
|
Until: 08:00,0.11, !- Field 48
|
|
Until: 09:00,0.15, !- Field 50
|
|
Until: 10:00,0.21, !- Field 52
|
|
Until: 11:00,0.19, !- Field 54
|
|
Until: 12:00,0.23, !- Field 56
|
|
Until: 13:00,0.20, !- Field 58
|
|
Until: 14:00,0.19, !- Field 60
|
|
Until: 15:00,0.15, !- Field 62
|
|
Until: 16:00,0.13, !- Field 64
|
|
Until: 17:00,0.14, !- Field 66
|
|
Until: 19:00,0.07, !- Field 68
|
|
Until: 22:00,0.00, !- Field 70
|
|
Until: 24:00,0.00, !- Field 72
|
|
For:Sunday Holidays AllOtherDays, !- Field 74
|
|
Until: 05:00,0.00, !- Field 75
|
|
Until: 06:00,0.00, !- Field 77
|
|
Until: 11:00,0.04, !- Field 79
|
|
Until: 13:00,0.06, !- Field 81
|
|
Until: 14:00,0.09, !- Field 83
|
|
Until: 15:00,0.06, !- Field 85
|
|
Until: 18:00,0.04, !- Field 87
|
|
Until: 22:00,0.00, !- Field 89
|
|
Until: 24:00,0.00; !- Field 91
|
|
|
|
Schedule:Compact,
|
|
ACTIVITY_SCH, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,120.; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
WORK_EFF_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
AIR_VELO_SCH, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
CLOTHING_SCH, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 04/30, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0, !- Field 3
|
|
Through: 09/30, !- Field 5
|
|
For: AllDays, !- Field 6
|
|
Until: 24:00,0.5, !- Field 7
|
|
Through: 12/31, !- Field 9
|
|
For: AllDays, !- Field 10
|
|
Until: 24:00,1.0; !- Field 11
|
|
|
|
Schedule:Compact,
|
|
SHADING_SCH, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
PlantOnSched, !- Name
|
|
On/Off, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
FAN_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
ReheatCoilAvailSched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
CoolingCoilAvailSched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
HTGSETP_SCH_YES_OPTIMUM, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: WinterDesignDay, !- Field 2
|
|
Until: 05:00,15.6, !- Field 3
|
|
Until: 06:00,17.6, !- Field 5
|
|
Until: 07:00,19.6, !- Field 7
|
|
Until: 22:00,21.0, !- Field 9
|
|
Until: 24:00,15.6, !- Field 11
|
|
For: Weekdays, !- Field 13
|
|
Until: 05:00,15.6, !- Field 14
|
|
Until: 06:00,17.8, !- Field 16
|
|
Until: 07:00,20.0, !- Field 18
|
|
Until: 22:00,21.0, !- Field 20
|
|
Until: 24:00,15.6, !- Field 22
|
|
For SummerDesignDay, !- Field 24
|
|
Until: 24:00,15.6, !- Field 25
|
|
For: Saturday, !- Field 27
|
|
Until: 05:00,15.6, !- Field 28
|
|
Until: 06:00,17.8, !- Field 30
|
|
Until: 07:00,20.0, !- Field 32
|
|
Until: 17:00,21.0, !- Field 34
|
|
Until: 24:00,15.6, !- Field 36
|
|
For:Sunday Holidays AllOtherDays, !- Field 38
|
|
Until: 24:00,15.6; !- Field 39
|
|
|
|
Schedule:Compact,
|
|
HTGSETP_SCH_YES_OPTIMUM_w_SB, !-Name
|
|
Temperature, !-Schedule Type Limits Name
|
|
Through: 12/31,
|
|
For: Weekdays,
|
|
Until: 01:00, 15.6,
|
|
Until: 02:00, 15.6,
|
|
Until: 03:00, 15.6,
|
|
Until: 04:00, 15.6,
|
|
Until: 05:00, 15.6,
|
|
Until: 06:00, 17.8,
|
|
Until: 07:00, 20,
|
|
Until: 08:00, 21,
|
|
Until: 09:00, 21,
|
|
Until: 10:00, 21,
|
|
Until: 11:00, 20.4444444444444,
|
|
Until: 12:00, 21,
|
|
Until: 13:00, 20.4444444444444,
|
|
Until: 14:00, 21,
|
|
Until: 15:00, 20.4444444444444,
|
|
Until: 16:00, 21,
|
|
Until: 17:00, 21,
|
|
Until: 18:00, 21,
|
|
Until: 19:00, 21,
|
|
Until: 20:00, 21,
|
|
Until: 21:00, 21,
|
|
Until: 22:00, 21,
|
|
Until: 23:00, 15.6,
|
|
Until: 24:00, 15.6,
|
|
For: Saturday,
|
|
Until: 01:00, 15.6,
|
|
Until: 02:00, 15.6,
|
|
Until: 03:00, 15.6,
|
|
Until: 04:00, 15.6,
|
|
Until: 05:00, 15.6,
|
|
Until: 06:00, 17.6,
|
|
Until: 07:00, 20,
|
|
Until: 08:00, 21,
|
|
Until: 09:00, 21,
|
|
Until: 10:00, 21,
|
|
Until: 11:00, 20.4444444444444,
|
|
Until: 12:00, 21,
|
|
Until: 13:00, 20.4444444444444,
|
|
Until: 14:00, 21,
|
|
Until: 15:00, 20.4444444444444,
|
|
Until: 16:00, 21,
|
|
Until: 17:00, 21,
|
|
Until: 18:00, 15.6,
|
|
Until: 19:00, 15.6,
|
|
Until: 20:00, 15.6,
|
|
Until: 21:00, 15.6,
|
|
Until: 22:00, 15.6,
|
|
Until: 23:00, 15.6,
|
|
Until: 24:00, 15.6,
|
|
For: WinterDesignDay,
|
|
Until: 05:00,15.6,
|
|
Until: 06:00,17.6,
|
|
Until: 07:00,19.6,
|
|
Until: 22:00,21.0,
|
|
Until: 24:00,15.6,
|
|
For SummerDesignDay,
|
|
Until: 24:00,15.6,
|
|
For:Sunday Holidays AllOtherDays,
|
|
Until: 24:00,15.6;
|
|
|
|
Schedule:Compact,
|
|
HTGSETP_SCH_YES_OPTIMUM_ORIGINAL, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: WinterDesignDay, !- Field 2
|
|
Until: 05:00,15.6, !- Field 3
|
|
Until: 06:00,17.6, !- Field 5
|
|
Until: 07:00,19.6, !- Field 7
|
|
Until: 22:00,21.0, !- Field 9
|
|
Until: 24:00,15.6, !- Field 11
|
|
For: Weekdays, !- Field 13
|
|
Until: 05:00,15.6, !- Field 14
|
|
Until: 06:00,17.8, !- Field 16
|
|
Until: 07:00,20.0, !- Field 18
|
|
Until: 22:00,21.0, !- Field 20
|
|
Until: 24:00,15.6, !- Field 22
|
|
For SummerDesignDay, !- Field 24
|
|
Until: 24:00,15.6, !- Field 25
|
|
For: Saturday, !- Field 27
|
|
Until: 05:00,15.6, !- Field 28
|
|
Until: 06:00,17.8, !- Field 30
|
|
Until: 07:00,20.0, !- Field 32
|
|
Until: 17:00,21.0, !- Field 34
|
|
Until: 24:00,15.6, !- Field 36
|
|
For:Sunday Holidays AllOtherDays, !- Field 38
|
|
Until: 24:00,15.6; !- Field 39
|
|
|
|
Schedule:Compact,
|
|
HTGSETP_SCH_NO_OPTIMUM, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: WinterDesignDay, !- Field 2
|
|
Until: 05:00,15.6, !- Field 3
|
|
Until: 06:00,17.6, !- Field 5
|
|
Until: 07:00,19.6, !- Field 7
|
|
Until: 22:00,21.0, !- Field 9
|
|
Until: 24:00,15.6, !- Field 11
|
|
For: Weekdays, !- Field 13
|
|
Until: 05:00,15.6, !- Field 14
|
|
Until: 06:00,21.0, !- Field 16
|
|
Until: 07:00,21.0, !- Field 18
|
|
Until: 22:00,21.0, !- Field 20
|
|
Until: 24:00,15.6, !- Field 22
|
|
For SummerDesignDay, !- Field 24
|
|
Until: 24:00,15.6, !- Field 25
|
|
For: Saturday, !- Field 27
|
|
Until: 05:00,15.6, !- Field 28
|
|
Until: 06:00,21.0, !- Field 30
|
|
Until: 07:00,21.0, !- Field 32
|
|
Until: 17:00,21.0, !- Field 34
|
|
Until: 24:00,15.6, !- Field 36
|
|
For:Sunday Holidays AllOtherDays, !- Field 38
|
|
Until: 24:00,15.6; !- Field 39
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
HTGSETP_SCH_PACU_VAV_bot,!- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: WinterDesignDay, !- Field 2
|
|
Until: 05:00,15.6, !- Field 3
|
|
Until: 06:00,17.6, !- Field 5
|
|
Until: 07:00,19.6, !- Field 7
|
|
Until: 22:00,21.0, !- Field 9
|
|
Until: 24:00,15.6, !- Field 11
|
|
For: Weekdays, !- Field 13
|
|
Until: 05:00,15.6, !- Field 14
|
|
Until: 06:00,21.0, !- Field 16
|
|
Until: 07:00,21.0, !- Field 18
|
|
Until: 22:00,21.0, !- Field 20
|
|
Until: 24:00,15.6, !- Field 22
|
|
For SummerDesignDay, !- Field 24
|
|
Until: 24:00,15.6, !- Field 25
|
|
For: Saturday, !- Field 27
|
|
Until: 05:00,15.6, !- Field 28
|
|
Until: 06:00,21.0, !- Field 30
|
|
Until: 07:00,21.0, !- Field 32
|
|
Until: 17:00,21.0, !- Field 34
|
|
Until: 24:00,15.6, !- Field 36
|
|
For:Sunday Holidays AllOtherDays, !- Field 38
|
|
Until: 24:00,15.6; !- Field 39
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
HTGSETP_SCH_PACU_VAV_mid,!- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: WinterDesignDay, !- Field 2
|
|
Until: 05:00,15.6, !- Field 3
|
|
Until: 06:00,17.6, !- Field 5
|
|
Until: 07:00,19.6, !- Field 7
|
|
Until: 22:00,21.0, !- Field 9
|
|
Until: 24:00,15.6, !- Field 11
|
|
For: Weekdays, !- Field 13
|
|
Until: 05:00,15.6, !- Field 14
|
|
Until: 06:00,21.0, !- Field 16
|
|
Until: 07:00,21.0, !- Field 18
|
|
Until: 22:00,21.0, !- Field 20
|
|
Until: 24:00,15.6, !- Field 22
|
|
For SummerDesignDay, !- Field 24
|
|
Until: 24:00,15.6, !- Field 25
|
|
For: Saturday, !- Field 27
|
|
Until: 05:00,15.6, !- Field 28
|
|
Until: 06:00,21.0, !- Field 30
|
|
Until: 07:00,21.0, !- Field 32
|
|
Until: 17:00,21.0, !- Field 34
|
|
Until: 24:00,15.6, !- Field 36
|
|
For:Sunday Holidays AllOtherDays, !- Field 38
|
|
Until: 24:00,15.6; !- Field 39
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
HTGSETP_SCH_PACU_VAV_top,!- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: WinterDesignDay, !- Field 2
|
|
Until: 05:00,15.6, !- Field 3
|
|
Until: 06:00,17.6, !- Field 5
|
|
Until: 07:00,19.6, !- Field 7
|
|
Until: 22:00,21.0, !- Field 9
|
|
Until: 24:00,15.6, !- Field 11
|
|
For: Weekdays, !- Field 13
|
|
Until: 05:00,15.6, !- Field 14
|
|
Until: 06:00,21.0, !- Field 16
|
|
Until: 07:00,21.0, !- Field 18
|
|
Until: 22:00,21.0, !- Field 20
|
|
Until: 24:00,15.6, !- Field 22
|
|
For SummerDesignDay, !- Field 24
|
|
Until: 24:00,15.6, !- Field 25
|
|
For: Saturday, !- Field 27
|
|
Until: 05:00,15.6, !- Field 28
|
|
Until: 06:00,21.0, !- Field 30
|
|
Until: 07:00,21.0, !- Field 32
|
|
Until: 17:00,21.0, !- Field 34
|
|
Until: 24:00,15.6, !- Field 36
|
|
For:Sunday Holidays AllOtherDays, !- Field 38
|
|
Until: 24:00,15.6; !- Field 39
|
|
|
|
Schedule:Compact,
|
|
CLGSETP_SCH_YES_OPTIMUM, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay, !- Field 2
|
|
Until: 05:00,26.7, !- Field 3
|
|
Until: 06:00,25.7, !- Field 5
|
|
Until: 07:00,25.0, !- Field 7
|
|
Until: 22:00,24.0, !- Field 9
|
|
Until: 24:00,26.7, !- Field 11
|
|
For: Weekdays, !- Field 13
|
|
Until: 05:00,26.7, !- Field 14
|
|
Until: 06:00,25.6, !- Field 16
|
|
Until: 07:00,25.0, !- Field 18
|
|
Until: 22:00,24.0, !- Field 20
|
|
Until: 24:00,26.7, !- Field 22
|
|
For: Saturday, !- Field 24
|
|
Until: 05:00,26.7, !- Field 25
|
|
Until: 06:00,25.7, !- Field 27
|
|
Until: 07:00,25.0, !- Field 29
|
|
Until: 17:00,24.0, !- Field 31
|
|
Until: 24:00,26.7, !- Field 33
|
|
For WinterDesignDay, !- Field 35
|
|
Until: 24:00,26.7, !- Field 36
|
|
For:Sunday Holidays AllOtherDays, !- Field 38
|
|
Until: 24:00,26.7; !- Field 39
|
|
|
|
Schedule:Compact,
|
|
CLGSETP_SCH_YES_OPTIMUM_ORIGINAL, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay, !- Field 2
|
|
Until: 05:00,26.7, !- Field 3
|
|
Until: 06:00,25.7, !- Field 5
|
|
Until: 07:00,25.0, !- Field 7
|
|
Until: 22:00,24.0, !- Field 9
|
|
Until: 24:00,26.7, !- Field 11
|
|
For: Weekdays, !- Field 13
|
|
Until: 05:00,26.7, !- Field 14
|
|
Until: 06:00,25.6, !- Field 16
|
|
Until: 07:00,25.0, !- Field 18
|
|
Until: 22:00,24.0, !- Field 20
|
|
Until: 24:00,26.7, !- Field 22
|
|
For: Saturday, !- Field 24
|
|
Until: 05:00,26.7, !- Field 25
|
|
Until: 06:00,25.7, !- Field 27
|
|
Until: 07:00,25.0, !- Field 29
|
|
Until: 17:00,24.0, !- Field 31
|
|
Until: 24:00,26.7, !- Field 33
|
|
For WinterDesignDay, !- Field 35
|
|
Until: 24:00,26.7, !- Field 36
|
|
For:Sunday Holidays AllOtherDays, !- Field 38
|
|
Until: 24:00,26.7; !- Field 39
|
|
|
|
Schedule:Compact,
|
|
CLGSETP_SCH_YES_OPTIMUM_w_SB, !-Name
|
|
Temperature, !-Schedule Type Limits Name
|
|
Through: 12/31,
|
|
For: Weekdays,
|
|
Until: 01:00, 26.7,
|
|
Until: 02:00, 26.7,
|
|
Until: 03:00, 26.7,
|
|
Until: 04:00, 26.7,
|
|
Until: 05:00, 26.7,
|
|
Until: 06:00, 25.6,
|
|
Until: 07:00, 25,
|
|
Until: 08:00, 24,
|
|
Until: 09:00, 24,
|
|
Until: 10:00, 24,
|
|
Until: 11:00, 24.5555555555556,
|
|
Until: 12:00, 24,
|
|
Until: 13:00, 24.5555555555556,
|
|
Until: 14:00, 24,
|
|
Until: 15:00, 24.5555555555556,
|
|
Until: 16:00, 24,
|
|
Until: 17:00, 24,
|
|
Until: 18:00, 24,
|
|
Until: 19:00, 24,
|
|
Until: 20:00, 24,
|
|
Until: 21:00, 24,
|
|
Until: 22:00, 24,
|
|
Until: 23:00, 26.7,
|
|
Until: 24:00, 26.7,
|
|
For: Saturday,
|
|
Until: 01:00, 26.7,
|
|
Until: 02:00, 26.7,
|
|
Until: 03:00, 26.7,
|
|
Until: 04:00, 26.7,
|
|
Until: 05:00, 26.7,
|
|
Until: 06:00, 25.7,
|
|
Until: 07:00, 25,
|
|
Until: 08:00, 24,
|
|
Until: 09:00, 24,
|
|
Until: 10:00, 24,
|
|
Until: 11:00, 24.5555555555556,
|
|
Until: 12:00, 24,
|
|
Until: 13:00, 24.5555555555556,
|
|
Until: 14:00, 24,
|
|
Until: 15:00, 24.5555555555556,
|
|
Until: 16:00, 24,
|
|
Until: 17:00, 24,
|
|
Until: 18:00, 26.7,
|
|
Until: 19:00, 26.7,
|
|
Until: 20:00, 26.7,
|
|
Until: 21:00, 26.7,
|
|
Until: 22:00, 26.7,
|
|
Until: 23:00, 26.7,
|
|
Until: 24:00, 26.7,
|
|
For: SummerDesignDay,
|
|
Until: 05:00,26.7,
|
|
Until: 06:00,25.7,
|
|
Until: 07:00,25.0,
|
|
Until: 22:00,24.0,
|
|
Until: 24:00,26.7,
|
|
For WinterDesignDay,
|
|
Until: 24:00,26.7,
|
|
For:Sunday Holidays AllOtherDays,
|
|
Until: 24:00,26.7;
|
|
|
|
Schedule:Compact,
|
|
CLGSETP_SCH_NO_OPTIMUM, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay, !- Field 2
|
|
Until: 05:00,26.7, !- Field 3
|
|
Until: 06:00,25.7, !- Field 5
|
|
Until: 07:00,25.0, !- Field 7
|
|
Until: 22:00,24.0, !- Field 9
|
|
Until: 24:00,26.7, !- Field 11
|
|
For: Weekdays, !- Field 13
|
|
Until: 05:00,26.7, !- Field 14
|
|
Until: 06:00,24.0, !- Field 16
|
|
Until: 07:00,24.0, !- Field 18
|
|
Until: 22:00,24.0, !- Field 20
|
|
Until: 24:00,26.7, !- Field 22
|
|
For: Saturday, !- Field 24
|
|
Until: 05:00,26.7, !- Field 25
|
|
Until: 06:00,24.0, !- Field 27
|
|
Until: 07:00,24.0, !- Field 29
|
|
Until: 17:00,24.0, !- Field 31
|
|
Until: 24:00,26.7, !- Field 33
|
|
For WinterDesignDay, !- Field 35
|
|
Until: 24:00,26.7, !- Field 36
|
|
For:Sunday Holidays AllOtherDays, !- Field 38
|
|
Until: 24:00,26.7; !- Field 39
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
CLGSETP_SCH_PACU_VAV_bot,!- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay, !- Field 2
|
|
Until: 05:00,26.7, !- Field 3
|
|
Until: 06:00,25.7, !- Field 5
|
|
Until: 07:00,25.0, !- Field 7
|
|
Until: 22:00,24.0, !- Field 9
|
|
Until: 24:00,26.7, !- Field 11
|
|
For: Weekdays, !- Field 13
|
|
Until: 05:00,26.7, !- Field 14
|
|
Until: 06:00,24.0, !- Field 16
|
|
Until: 07:00,24.0, !- Field 18
|
|
Until: 22:00,24.0, !- Field 20
|
|
Until: 24:00,26.7, !- Field 22
|
|
For: Saturday, !- Field 24
|
|
Until: 05:00,26.7, !- Field 25
|
|
Until: 06:00,24.0, !- Field 27
|
|
Until: 07:00,24.0, !- Field 29
|
|
Until: 17:00,24.0, !- Field 31
|
|
Until: 24:00,26.7, !- Field 33
|
|
For WinterDesignDay, !- Field 35
|
|
Until: 24:00,26.7, !- Field 36
|
|
For:Sunday Holidays AllOtherDays, !- Field 38
|
|
Until: 24:00,26.7; !- Field 39
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
CLGSETP_SCH_PACU_VAV_mid,!- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay, !- Field 2
|
|
Until: 05:00,26.7, !- Field 3
|
|
Until: 06:00,25.7, !- Field 5
|
|
Until: 07:00,25.0, !- Field 7
|
|
Until: 22:00,24.0, !- Field 9
|
|
Until: 24:00,26.7, !- Field 11
|
|
For: Weekdays, !- Field 13
|
|
Until: 05:00,26.7, !- Field 14
|
|
Until: 06:00,24.0, !- Field 16
|
|
Until: 07:00,24.0, !- Field 18
|
|
Until: 22:00,24.0, !- Field 20
|
|
Until: 24:00,26.7, !- Field 22
|
|
For: Saturday, !- Field 24
|
|
Until: 05:00,26.7, !- Field 25
|
|
Until: 06:00,24.0, !- Field 27
|
|
Until: 07:00,24.0, !- Field 29
|
|
Until: 17:00,24.0, !- Field 31
|
|
Until: 24:00,26.7, !- Field 33
|
|
For WinterDesignDay, !- Field 35
|
|
Until: 24:00,26.7, !- Field 36
|
|
For:Sunday Holidays AllOtherDays, !- Field 38
|
|
Until: 24:00,26.7; !- Field 39
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
CLGSETP_SCH_PACU_VAV_top,!- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay, !- Field 2
|
|
Until: 05:00,26.7, !- Field 3
|
|
Until: 06:00,25.7, !- Field 5
|
|
Until: 07:00,25.0, !- Field 7
|
|
Until: 22:00,24.0, !- Field 9
|
|
Until: 24:00,26.7, !- Field 11
|
|
For: Weekdays, !- Field 13
|
|
Until: 05:00,26.7, !- Field 14
|
|
Until: 06:00,24.0, !- Field 16
|
|
Until: 07:00,24.0, !- Field 18
|
|
Until: 22:00,24.0, !- Field 20
|
|
Until: 24:00,26.7, !- Field 22
|
|
For: Saturday, !- Field 24
|
|
Until: 05:00,26.7, !- Field 25
|
|
Until: 06:00,24.0, !- Field 27
|
|
Until: 07:00,24.0, !- Field 29
|
|
Until: 17:00,24.0, !- Field 31
|
|
Until: 24:00,26.7, !- Field 33
|
|
For WinterDesignDay, !- Field 35
|
|
Until: 24:00,26.7, !- Field 36
|
|
For:Sunday Holidays AllOtherDays, !- Field 38
|
|
Until: 24:00,26.7; !- Field 39
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
CLGSETP_SCH_NO_SETBACK, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay, !- Field 2
|
|
Until: 05:00,26.7, !- Field 3
|
|
Until: 06:00,25.7, !- Field 5
|
|
Until: 07:00,25.0, !- Field 7
|
|
Until: 22:00,24.0, !- Field 9
|
|
Until: 24:00,26.7, !- Field 11
|
|
For: Weekdays, !- Field 13
|
|
Until: 05:00,24.0, !- Field 14
|
|
Until: 06:00,24.0, !- Field 16
|
|
Until: 07:00,24.0, !- Field 18
|
|
Until: 22:00,24.0, !- Field 20
|
|
Until: 24:00,24.0, !- Field 22
|
|
For: Saturday, !- Field 24
|
|
Until: 05:00,24.0, !- Field 25
|
|
Until: 06:00,24.0, !- Field 27
|
|
Until: 07:00,24.0, !- Field 29
|
|
Until: 17:00,24.0, !- Field 31
|
|
Until: 24:00,24.0, !- Field 33
|
|
For WinterDesignDay, !- Field 35
|
|
Until: 24:00,24.0, !- Field 36
|
|
For:Sunday Holidays AllOtherDays, !- Field 38
|
|
Until: 24:00,24.0; !- Field 39
|
|
|
|
Schedule:Compact,
|
|
Humidity Setpoint Schedule, !- Name
|
|
Humidity, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 24:00,50, !- Field 3
|
|
For: Saturday WinterDesignDay, !- Field 5
|
|
Until: 24:00,50, !- Field 6
|
|
For:Sunday Holidays AllOtherDays, !- Field 8
|
|
Until: 24:00,50; !- Field 9
|
|
|
|
Schedule:Compact,
|
|
MinOA_MotorizedDamper_Sched, !- Name
|
|
fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 07:00,0.0, !- Field 3
|
|
Until: 22:00,1.0, !- Field 5
|
|
Until: 24:00,0.0, !- Field 7
|
|
For: Saturday WinterDesignDay, !- Field 9
|
|
Until: 07:00,0.0, !- Field 10
|
|
Until: 18:00,1.0, !- Field 12
|
|
Until: 24:00,0.0, !- Field 14
|
|
For:Sunday Holidays AllOtherDays, !- Field 16
|
|
Until: 24:00,0.0; !- Field 17
|
|
|
|
Schedule:Compact,
|
|
MinOA_Sched, !- Name
|
|
fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Dual Zone Control Type Sched, !- Name
|
|
Control Type, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,4; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Supply-Air-Temp-Sch,!- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,12.8; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
CW-Loop-Temp-Schedule, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,6.7; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
HW-Loop-Temp-Schedule, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Core_bottom sub cat Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Core_bottom sub cat Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Core_bottom sub cat Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Core_bottom sub catHot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Core_mid sub cat Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Core_mid sub cat Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Core_mid sub cat Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Core_mid sub catHot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Core_top sub cat Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Core_top sub cat Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Core_top sub cat Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Core_top sub catHot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_top_ZN_3 sub cat Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_top_ZN_3 sub cat Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Perimeter_top_ZN_3 sub cat Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_top_ZN_3 sub catHot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_top_ZN_2 sub cat Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_top_ZN_2 sub cat Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Perimeter_top_ZN_2 sub cat Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_top_ZN_2 sub catHot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_top_ZN_1 sub cat Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_top_ZN_1 sub cat Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Perimeter_top_ZN_1 sub cat Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_top_ZN_1 sub catHot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_top_ZN_4 sub cat Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_top_ZN_4 sub cat Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Perimeter_top_ZN_4 sub cat Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_top_ZN_4 sub catHot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_bot_ZN_3 sub cat Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_bot_ZN_3 sub cat Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Perimeter_bot_ZN_3 sub cat Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_bot_ZN_3 sub catHot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_bot_ZN_2 sub cat Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_bot_ZN_2 sub cat Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Perimeter_bot_ZN_2 sub cat Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_bot_ZN_2 sub catHot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_bot_ZN_1 sub cat Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_bot_ZN_1 sub cat Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Perimeter_bot_ZN_1 sub cat Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_bot_ZN_1 sub catHot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_bot_ZN_4 sub cat Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_bot_ZN_4 sub cat Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Perimeter_bot_ZN_4 sub cat Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_bot_ZN_4 sub catHot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_mid_ZN_3 sub cat Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_mid_ZN_3 sub cat Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Perimeter_mid_ZN_3 sub cat Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_mid_ZN_3 sub catHot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_mid_ZN_2 sub cat Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_mid_ZN_2 sub cat Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Perimeter_mid_ZN_2 sub cat Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_mid_ZN_2 sub catHot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_mid_ZN_1 sub cat Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_mid_ZN_1 sub cat Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Perimeter_mid_ZN_1 sub cat Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_mid_ZN_1 sub catHot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_mid_ZN_4 sub cat Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_mid_ZN_4 sub cat Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
Perimeter_mid_ZN_4 sub cat Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Perimeter_mid_ZN_4 sub catHot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,55; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
SHWSys1-Loop-Temp-Schedule, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
SHWSys1 Water Heater Setpoint Temperature Schedule, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
SHWSys1 Water Heater Ambient Temperature Schedule, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,22.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
INFIL_SCH_PNNL, !- Name
|
|
fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 06:00,1.0, !- Field 3
|
|
Until: 22:00,0.25, !- Field 5
|
|
Until: 24:00,1.0, !- Field 7
|
|
For: Saturday WinterDesignDay, !- Field 9
|
|
Until: 06:00,1.0, !- Field 10
|
|
Until: 18:00,0.25, !- Field 12
|
|
Until: 24:00,1.0, !- Field 14
|
|
For:Sunday Holidays AllOtherDays, !- Field 16
|
|
Until: 24:00,1.0; !- Field 17
|
|
|
|
Schedule:Compact,
|
|
INFIL_Door_Opening_SCH, !- Name
|
|
fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 06:00,0.0, !- Field 3
|
|
Until: 07:00,0.131, !- Field 5
|
|
Until: 08:00,1.0, !- Field 7
|
|
Until: 12:00,0.131, !- Field 9
|
|
Until: 13:00,1.0, !- Field 11
|
|
Until: 17:00,0.131, !- Field 13
|
|
Until: 18:00,1.0, !- Field 15
|
|
Until: 19:00,0.131, !- Field 17
|
|
Until: 24:00,0.0, !- Field 19
|
|
For: Saturday Sunday Holidays AllOtherDays, !- Field 21
|
|
Until: 24:00,0.0; !- Field 22
|
|
|
|
|
|
|
|
Schedule:Compact,
|
|
PERIMETER_MID_ZN_2_MDP_Sch, !-Name
|
|
Fraction, !-Schedule Type Limits Name
|
|
Through: 12/31,
|
|
For: Weekdays,
|
|
Until: 01:00, 0.111,
|
|
Until: 02:00, 0.111,
|
|
Until: 03:00, 0.111,
|
|
Until: 04:00, 0.111,
|
|
Until: 05:00, 0.111,
|
|
Until: 06:00, 0.111,
|
|
Until: 07:00, 0.111,
|
|
Until: 08:00, 0.111,
|
|
Until: 09:00, 0.111,
|
|
Until: 10:00, 0.111,
|
|
Until: 11:00, 0.01,
|
|
Until: 12:00, 0.111,
|
|
Until: 13:00, 0.01,
|
|
Until: 14:00, 0.111,
|
|
Until: 15:00, 0.01,
|
|
Until: 16:00, 0.111,
|
|
Until: 17:00, 0.111,
|
|
Until: 18:00, 0.111,
|
|
Until: 19:00, 0.111,
|
|
Until: 20:00, 0.111,
|
|
Until: 21:00, 0.111,
|
|
Until: 22:00, 0.111,
|
|
Until: 23:00, 0.111,
|
|
Until: 24:00, 0.111,
|
|
For: Saturday,
|
|
Until: 01:00, 0.111,
|
|
Until: 02:00, 0.111,
|
|
Until: 03:00, 0.111,
|
|
Until: 04:00, 0.111,
|
|
Until: 05:00, 0.111,
|
|
Until: 06:00, 0.111,
|
|
Until: 07:00, 0.111,
|
|
Until: 08:00, 0.111,
|
|
Until: 09:00, 0.111,
|
|
Until: 10:00, 0.111,
|
|
Until: 11:00, 0.01,
|
|
Until: 12:00, 0.111,
|
|
Until: 13:00, 0.01,
|
|
Until: 14:00, 0.111,
|
|
Until: 15:00, 0.01,
|
|
Until: 16:00, 0.111,
|
|
Until: 17:00, 0.111,
|
|
Until: 18:00, 0.111,
|
|
Until: 19:00, 0.111,
|
|
Until: 20:00, 0.111,
|
|
Until: 21:00, 0.111,
|
|
Until: 22:00, 0.111,
|
|
Until: 23:00, 0.111,
|
|
Until: 24:00, 0.111,
|
|
For: AllOtherDays,
|
|
Until: 24:00,
|
|
0.111;
|
|
|
|
Schedule:Compact,
|
|
PERIMETER_MID_ZN_2_OA_Mult, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 01:00, !- Field 3
|
|
1, !- Field 4
|
|
Until: 02:00, !- Field 5
|
|
1, !- Field 6
|
|
Until: 03:00, !- Field 7
|
|
1, !- Field 8
|
|
Until: 04:00, !- Field 9
|
|
1, !- Field 10
|
|
Until: 05:00, !- Field 11
|
|
1, !- Field 12
|
|
Until: 06:00, !- Field 13
|
|
1, !- Field 14
|
|
Until: 07:00, !- Field 15
|
|
1, !- Field 16
|
|
Until: 08:00, !- Field 17
|
|
1, !- Field 18
|
|
Until: 09:00, !- Field 19
|
|
1, !- Field 20
|
|
Until: 10:00, !- Field 21
|
|
1, !- Field 22
|
|
Until: 11:00, !- Field 23
|
|
0, !- Field 24
|
|
Until: 12:00, !- Field 25
|
|
1, !- Field 26
|
|
Until: 13:00, !- Field 27
|
|
0, !- Field 28
|
|
Until: 14:00, !- Field 29
|
|
1, !- Field 30
|
|
Until: 15:00, !- Field 31
|
|
0, !- Field 32
|
|
Until: 16:00, !- Field 33
|
|
1, !- Field 34
|
|
Until: 17:00, !- Field 35
|
|
1, !- Field 36
|
|
Until: 18:00, !- Field 37
|
|
1, !- Field 38
|
|
Until: 19:00, !- Field 39
|
|
1, !- Field 40
|
|
Until: 20:00, !- Field 41
|
|
1, !- Field 42
|
|
Until: 21:00, !- Field 43
|
|
1, !- Field 44
|
|
Until: 22:00, !- Field 45
|
|
1, !- Field 46
|
|
Until: 23:00, !- Field 47
|
|
1, !- Field 48
|
|
Until: 24:00, !- Field 49
|
|
1, !- Field 50
|
|
For: Saturday, !- Field 51
|
|
Until: 01:00, !- Field 52
|
|
1, !- Field 53
|
|
Until: 02:00, !- Field 54
|
|
1, !- Field 55
|
|
Until: 03:00, !- Field 56
|
|
1, !- Field 57
|
|
Until: 04:00, !- Field 58
|
|
1, !- Field 59
|
|
Until: 05:00, !- Field 60
|
|
1, !- Field 61
|
|
Until: 06:00, !- Field 62
|
|
1, !- Field 63
|
|
Until: 07:00, !- Field 64
|
|
1, !- Field 65
|
|
Until: 08:00, !- Field 66
|
|
1, !- Field 67
|
|
Until: 09:00, !- Field 68
|
|
1, !- Field 69
|
|
Until: 10:00, !- Field 70
|
|
1, !- Field 71
|
|
Until: 11:00, !- Field 72
|
|
0, !- Field 73
|
|
Until: 12:00, !- Field 74
|
|
1, !- Field 75
|
|
Until: 13:00, !- Field 76
|
|
0, !- Field 77
|
|
Until: 14:00, !- Field 78
|
|
1, !- Field 79
|
|
Until: 15:00, !- Field 80
|
|
0, !- Field 81
|
|
Until: 16:00, !- Field 82
|
|
1, !- Field 83
|
|
Until: 17:00, !- Field 84
|
|
1, !- Field 85
|
|
Until: 18:00, !- Field 86
|
|
1, !- Field 87
|
|
Until: 19:00, !- Field 88
|
|
1, !- Field 89
|
|
Until: 20:00, !- Field 90
|
|
1, !- Field 91
|
|
Until: 21:00, !- Field 92
|
|
1, !- Field 93
|
|
Until: 22:00, !- Field 94
|
|
1, !- Field 95
|
|
Until: 23:00, !- Field 96
|
|
1, !- Field 97
|
|
Until: 24:00, !- Field 98
|
|
1, !- Field 99
|
|
For: AllOtherDays, !- Field 100
|
|
Until: 24:00, !- Field 101
|
|
1; !- Field 102
|
|
|
|
Schedule:Constant,
|
|
VAV_BOT Max OA Fraction, !- Name
|
|
, !- Schedule Type Limits Name
|
|
1.0; !- Hourly Value
|
|
|
|
Schedule:Constant,
|
|
VAV_MID Max OA Fraction, !- Name
|
|
, !- Schedule Type Limits Name
|
|
1.0; !- Hourly Value
|
|
|
|
Schedule:Constant,
|
|
VAV_TOP Max OA Fraction, !- Name
|
|
, !- Schedule Type Limits Name
|
|
1.0; !- Hourly Value
|
|
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: PEOPLE ===========
|
|
|
|
People,
|
|
Core_bottom, !- Name
|
|
Core_bottom, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
18.5787942465724, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Core_mid, !- Name
|
|
Core_mid, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
18.5787942465724, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Core_top, !- Name
|
|
Core_top, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
18.5787942465724, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Perimeter_top_ZN_3, !- Name
|
|
Perimeter_top_ZN_3, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
18.5787942465724, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Perimeter_top_ZN_2, !- Name
|
|
Perimeter_top_ZN_2, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
18.5787942465724, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Perimeter_top_ZN_1, !- Name
|
|
Perimeter_top_ZN_1, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
18.5787942465724, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Perimeter_top_ZN_4, !- Name
|
|
Perimeter_top_ZN_4, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
18.5787942465724, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Perimeter_bot_ZN_3, !- Name
|
|
Perimeter_bot_ZN_3, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
18.5787942465724, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Perimeter_bot_ZN_2, !- Name
|
|
Perimeter_bot_ZN_2, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
18.5787942465724, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Perimeter_bot_ZN_1, !- Name
|
|
Perimeter_bot_ZN_1, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
18.5787942465724, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Perimeter_bot_ZN_4, !- Name
|
|
Perimeter_bot_ZN_4, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
18.5787942465724, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Perimeter_mid_ZN_3, !- Name
|
|
Perimeter_mid_ZN_3, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
18.5787942465724, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Perimeter_mid_ZN_2, !- Name
|
|
Perimeter_mid_ZN_2, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH_w_SB, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
18.5787942465724, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Perimeter_mid_ZN_1, !- Name
|
|
Perimeter_mid_ZN_1, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
18.5787942465724, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Perimeter_mid_ZN_4, !- Name
|
|
Perimeter_mid_ZN_4, !- Zone or ZoneList Name
|
|
BLDG_OCC_SCH_wo_SB, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Zone Floor Area {person/m2}
|
|
18.5787942465724, !- Zone Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: LIGHTS ===========
|
|
|
|
Lights,
|
|
Core_bottom_Lights, !- Name
|
|
Core_bottom, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
6.888902667, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Core_mid_Lights, !- Name
|
|
Core_mid, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
6.888902667, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Core_top_Lights, !- Name
|
|
Core_top, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
6.888902667, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Perimeter_top_ZN_3_Lights, !- Name
|
|
Perimeter_top_ZN_3, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
6.888902667, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Perimeter_top_ZN_2_Lights, !- Name
|
|
Perimeter_top_ZN_2, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
6.888902667, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Perimeter_top_ZN_1_Lights, !- Name
|
|
Perimeter_top_ZN_1, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
6.888902667, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Perimeter_top_ZN_4_Lights, !- Name
|
|
Perimeter_top_ZN_4, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
6.888902667, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Perimeter_bot_ZN_3_Lights, !- Name
|
|
Perimeter_bot_ZN_3, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
6.888902667, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Perimeter_bot_ZN_2_Lights, !- Name
|
|
Perimeter_bot_ZN_2, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
6.888902667, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Perimeter_bot_ZN_1_Lights, !- Name
|
|
Perimeter_bot_ZN_1, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
6.888902667, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Perimeter_bot_ZN_4_Lights, !- Name
|
|
Perimeter_bot_ZN_4, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
6.888902667, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Perimeter_mid_ZN_3_Lights, !- Name
|
|
Perimeter_mid_ZN_3, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
6.888902667, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Perimeter_mid_ZN_2_Lights, !- Name
|
|
Perimeter_mid_ZN_2, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
6.888902667, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Perimeter_mid_ZN_1_Lights, !- Name
|
|
Perimeter_mid_ZN_1, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
6.888902667, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Perimeter_mid_ZN_4_Lights, !- Name
|
|
Perimeter_mid_ZN_4, !- Zone or ZoneList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
6.888902667, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
LightsWired, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ELECTRIC EQUIPMENT ===========
|
|
|
|
ElectricEquipment,
|
|
Core_bottom_MiscPlug_Equip, !- Name
|
|
Core_bottom, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
7937.1558, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Core_mid_MiscPlug_Equip, !- Name
|
|
Core_mid, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
7937.1558, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Core_top_MiscPlug_Equip, !- Name
|
|
Core_top, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
7937.1558, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Perimeter_top_ZN_3_MiscPlug_Equip, !- Name
|
|
Perimeter_top_ZN_3, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
1673.2138, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Perimeter_top_ZN_2_MiscPlug_Equip, !- Name
|
|
Perimeter_top_ZN_2, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
1059.2170, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Perimeter_top_ZN_1_MiscPlug_Equip, !- Name
|
|
Perimeter_top_ZN_1, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
1673.2028, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Perimeter_top_ZN_4_MiscPlug_Equip, !- Name
|
|
Perimeter_top_ZN_4, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
1059.2100, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Perimeter_bot_ZN_3_MiscPlug_Equip, !- Name
|
|
Perimeter_bot_ZN_3, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
1673.2138, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Perimeter_bot_ZN_2_MiscPlug_Equip, !- Name
|
|
Perimeter_bot_ZN_2, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
1059.2170, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Perimeter_bot_ZN_1_MiscPlug_Equip, !- Name
|
|
Perimeter_bot_ZN_1, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
1673.2028, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Perimeter_bot_ZN_4_MiscPlug_Equip, !- Name
|
|
Perimeter_bot_ZN_4, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
1059.2100, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Perimeter_mid_ZN_3_MiscPlug_Equip, !- Name
|
|
Perimeter_mid_ZN_3, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
1673.2138, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Perimeter_mid_ZN_2_MiscPlug_Equip, !- Name
|
|
Perimeter_mid_ZN_2, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
1059.2170, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Perimeter_mid_ZN_1_MiscPlug_Equip, !- Name
|
|
Perimeter_mid_ZN_1, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
1673.2028, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Perimeter_mid_ZN_4_MiscPlug_Equip, !- Name
|
|
Perimeter_mid_ZN_4, !- Zone or ZoneList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
1059.2100, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
|
|
|
|
ElectricEquipment,
|
|
Core_bottom_Elevators_Equip, !- Name
|
|
Core_bottom, !- Zone or ZoneList Name
|
|
BLDG_ELEVATORS, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
32109.8901098901, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
ElevatorLift; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Elevators_Lights_Fan, !- Name
|
|
Core_bottom, !- Zone or ZoneList Name
|
|
ELEV_LIGHT_FAN_SCH_ADD_DF, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
125, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
ElevatorLightsFan; !- End-Use Subcategory
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: EXTERIORLIGHTS ===========
|
|
|
|
|
|
Exterior:Lights,
|
|
Exterior_Lights_a, !- Name
|
|
Exterior_lighting_schedule_a, !- Schedule Name
|
|
519.2, !- Design Level {W}
|
|
AstronomicalClock, !- Control Option
|
|
General; !- End-Use Subcategory
|
|
|
|
Exterior:Lights,
|
|
Exterior_Lights_b, !- Name
|
|
Exterior_lighting_schedule_b_2016, !- Schedule Name
|
|
375.7, !- Design Level {W}
|
|
AstronomicalClock, !- Control Option
|
|
General; !- End-Use Subcategory
|
|
|
|
Exterior:Lights,
|
|
Exterior_Lights_c, !- Name
|
|
Exterior_lighting_schedule_c_2016, !- Schedule Name
|
|
4341.6, !- Design Level {W}
|
|
AstronomicalClock, !- Control Option
|
|
General; !- End-Use Subcategory
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: DAYLIGHTING:CONTROLS ===========
|
|
|
|
Daylighting:Controls,
|
|
Perimeter_bot_ZN_1_DaylCtrl, !- Name
|
|
Perimeter_bot_ZN_1, !- Zone Name
|
|
SplitFlux, !- Daylighting Method
|
|
, !- Availability Schedule Name
|
|
Continuousoff, !- Lighting Control Type
|
|
0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control
|
|
0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control
|
|
3, !- Number of Stepped Control Steps
|
|
1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control
|
|
Perimeter_bot_ZN_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name
|
|
180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg}
|
|
22.0, !- Maximum Allowable Discomfort Glare Index
|
|
, !- DElight Gridding Resolution {m2}
|
|
Perimeter_bot_ZN_1_DaylRefPt1, !- Daylighting Reference Point 1 Name
|
|
0.3835, !- Fraction of Zone Controlled by Reference Point 1
|
|
377, !- Illuminance Setpoint at Reference Point 1 {lux}
|
|
Perimeter_bot_ZN_1_DaylRefPt2, !- Daylighting Reference Point 2 Name
|
|
0.1395, !- Fraction of Zone Controlled by Reference Point 2
|
|
377; !- Illuminance Setpoint at Reference Point 2 {lux}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Perimeter_bot_ZN_1_DaylRefPt1, !- Name
|
|
Perimeter_bot_ZN_1, !- Zone Name
|
|
24.955500, !- X-Coordinate of Reference Point {m}
|
|
1.524000, !- Y-Coordinate of Reference Point {m}
|
|
0.762000; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Perimeter_bot_ZN_1_DaylRefPt2, !- Name
|
|
Perimeter_bot_ZN_1, !- Zone Name
|
|
24.955500, !- X-Coordinate of Reference Point {m}
|
|
3.048000, !- Y-Coordinate of Reference Point {m}
|
|
0.762000; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:Controls,
|
|
Perimeter_bot_ZN_2_DaylCtrl, !- Name
|
|
Perimeter_bot_ZN_2, !- Zone Name
|
|
SplitFlux, !- Daylighting Method
|
|
, !- Availability Schedule Name
|
|
Continuousoff, !- Lighting Control Type
|
|
0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control
|
|
0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control
|
|
3, !- Number of Stepped Control Steps
|
|
1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control
|
|
Perimeter_bot_ZN_2_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name
|
|
90.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg}
|
|
22.0, !- Maximum Allowable Discomfort Glare Index
|
|
, !- DElight Gridding Resolution {m2}
|
|
Perimeter_bot_ZN_2_DaylRefPt1, !- Daylighting Reference Point 1 Name
|
|
0.3835, !- Fraction of Zone Controlled by Reference Point 1
|
|
377, !- Illuminance Setpoint at Reference Point 1 {lux}
|
|
Perimeter_bot_ZN_2_DaylRefPt2, !- Daylighting Reference Point 2 Name
|
|
0.1395, !- Fraction of Zone Controlled by Reference Point 2
|
|
377; !- Illuminance Setpoint at Reference Point 2 {lux}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Perimeter_bot_ZN_2_DaylRefPt1, !- Name
|
|
Perimeter_bot_ZN_2, !- Zone Name
|
|
48.387000, !- X-Coordinate of Reference Point {m}
|
|
16.636900, !- Y-Coordinate of Reference Point {m}
|
|
0.762000; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Perimeter_bot_ZN_2_DaylRefPt2, !- Name
|
|
Perimeter_bot_ZN_2, !- Zone Name
|
|
46.863000, !- X-Coordinate of Reference Point {m}
|
|
16.636900, !- Y-Coordinate of Reference Point {m}
|
|
0.762000; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:Controls,
|
|
Perimeter_bot_ZN_3_DaylCtrl, !- Name
|
|
Perimeter_bot_ZN_3, !- Zone Name
|
|
SplitFlux, !- Daylighting Method
|
|
, !- Availability Schedule Name
|
|
Continuousoff, !- Lighting Control Type
|
|
0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control
|
|
0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control
|
|
3, !- Number of Stepped Control Steps
|
|
1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control
|
|
Perimeter_bot_ZN_3_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name
|
|
0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg}
|
|
22.0, !- Maximum Allowable Discomfort Glare Index
|
|
, !- DElight Gridding Resolution {m2}
|
|
Perimeter_bot_ZN_3_DaylRefPt1, !- Daylighting Reference Point 1 Name
|
|
0.3835, !- Fraction of Zone Controlled by Reference Point 1
|
|
377, !- Illuminance Setpoint at Reference Point 1 {lux}
|
|
Perimeter_bot_ZN_3_DaylRefPt2, !- Daylighting Reference Point 2 Name
|
|
0.1395, !- Fraction of Zone Controlled by Reference Point 2
|
|
377; !- Illuminance Setpoint at Reference Point 2 {lux}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Perimeter_bot_ZN_3_DaylRefPt1, !- Name
|
|
Perimeter_bot_ZN_3, !- Zone Name
|
|
24.955500, !- X-Coordinate of Reference Point {m}
|
|
31.749800, !- Y-Coordinate of Reference Point {m}
|
|
0.762000; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Perimeter_bot_ZN_3_DaylRefPt2, !- Name
|
|
Perimeter_bot_ZN_3, !- Zone Name
|
|
24.955500, !- X-Coordinate of Reference Point {m}
|
|
30.225800, !- Y-Coordinate of Reference Point {m}
|
|
0.762000; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:Controls,
|
|
Perimeter_bot_ZN_4_DaylCtrl, !- Name
|
|
Perimeter_bot_ZN_4, !- Zone Name
|
|
SplitFlux, !- Daylighting Method
|
|
, !- Availability Schedule Name
|
|
Continuousoff, !- Lighting Control Type
|
|
0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control
|
|
0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control
|
|
3, !- Number of Stepped Control Steps
|
|
1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control
|
|
Perimeter_bot_ZN_4_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name
|
|
270.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg}
|
|
22.0, !- Maximum Allowable Discomfort Glare Index
|
|
, !- DElight Gridding Resolution {m2}
|
|
Perimeter_bot_ZN_4_DaylRefPt1, !- Daylighting Reference Point 1 Name
|
|
0.3835, !- Fraction of Zone Controlled by Reference Point 1
|
|
377, !- Illuminance Setpoint at Reference Point 1 {lux}
|
|
Perimeter_bot_ZN_4_DaylRefPt2, !- Daylighting Reference Point 2 Name
|
|
0.1395, !- Fraction of Zone Controlled by Reference Point 2
|
|
377; !- Illuminance Setpoint at Reference Point 2 {lux}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Perimeter_bot_ZN_4_DaylRefPt1, !- Name
|
|
Perimeter_bot_ZN_4, !- Zone Name
|
|
1.524000, !- X-Coordinate of Reference Point {m}
|
|
16.636900, !- Y-Coordinate of Reference Point {m}
|
|
0.762000; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Perimeter_bot_ZN_4_DaylRefPt2, !- Name
|
|
Perimeter_bot_ZN_4, !- Zone Name
|
|
3.048000, !- X-Coordinate of Reference Point {m}
|
|
16.636900, !- Y-Coordinate of Reference Point {m}
|
|
0.762000; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:Controls,
|
|
Perimeter_mid_ZN_1_DaylCtrl, !- Name
|
|
Perimeter_mid_ZN_1, !- Zone Name
|
|
SplitFlux, !- Daylighting Method
|
|
, !- Availability Schedule Name
|
|
Continuousoff, !- Lighting Control Type
|
|
0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control
|
|
0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control
|
|
3, !- Number of Stepped Control Steps
|
|
1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control
|
|
Perimeter_mid_ZN_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name
|
|
180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg}
|
|
22.0, !- Maximum Allowable Discomfort Glare Index
|
|
, !- DElight Gridding Resolution {m2}
|
|
Perimeter_mid_ZN_1_DaylRefPt1, !- Daylighting Reference Point 1 Name
|
|
0.3835, !- Fraction of Zone Controlled by Reference Point 1
|
|
377, !- Illuminance Setpoint at Reference Point 1 {lux}
|
|
Perimeter_mid_ZN_1_DaylRefPt2, !- Daylighting Reference Point 2 Name
|
|
0.1395, !- Fraction of Zone Controlled by Reference Point 2
|
|
377; !- Illuminance Setpoint at Reference Point 2 {lux}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Perimeter_mid_ZN_1_DaylRefPt1, !- Name
|
|
Perimeter_mid_ZN_1, !- Zone Name
|
|
24.955500, !- X-Coordinate of Reference Point {m}
|
|
1.524000, !- Y-Coordinate of Reference Point {m}
|
|
4.724400; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Perimeter_mid_ZN_1_DaylRefPt2, !- Name
|
|
Perimeter_mid_ZN_1, !- Zone Name
|
|
24.955500, !- X-Coordinate of Reference Point {m}
|
|
3.048000, !- Y-Coordinate of Reference Point {m}
|
|
4.724400; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:Controls,
|
|
Perimeter_mid_ZN_2_DaylCtrl, !- Name
|
|
Perimeter_mid_ZN_2, !- Zone Name
|
|
SplitFlux, !- Daylighting Method
|
|
, !- Availability Schedule Name
|
|
Continuousoff, !- Lighting Control Type
|
|
0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control
|
|
0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control
|
|
3, !- Number of Stepped Control Steps
|
|
1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control
|
|
Perimeter_mid_ZN_2_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name
|
|
90.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg}
|
|
22.0, !- Maximum Allowable Discomfort Glare Index
|
|
, !- DElight Gridding Resolution {m2}
|
|
Perimeter_mid_ZN_2_DaylRefPt1, !- Daylighting Reference Point 1 Name
|
|
0.3835, !- Fraction of Zone Controlled by Reference Point 1
|
|
377, !- Illuminance Setpoint at Reference Point 1 {lux}
|
|
Perimeter_mid_ZN_2_DaylRefPt2, !- Daylighting Reference Point 2 Name
|
|
0.1395, !- Fraction of Zone Controlled by Reference Point 2
|
|
377; !- Illuminance Setpoint at Reference Point 2 {lux}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Perimeter_mid_ZN_2_DaylRefPt1, !- Name
|
|
Perimeter_mid_ZN_2, !- Zone Name
|
|
48.387000, !- X-Coordinate of Reference Point {m}
|
|
16.636900, !- Y-Coordinate of Reference Point {m}
|
|
4.724400; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Perimeter_mid_ZN_2_DaylRefPt2, !- Name
|
|
Perimeter_mid_ZN_2, !- Zone Name
|
|
46.863000, !- X-Coordinate of Reference Point {m}
|
|
16.636900, !- Y-Coordinate of Reference Point {m}
|
|
4.724400; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:Controls,
|
|
Perimeter_mid_ZN_3_DaylCtrl, !- Name
|
|
Perimeter_mid_ZN_3, !- Zone Name
|
|
SplitFlux, !- Daylighting Method
|
|
, !- Availability Schedule Name
|
|
Continuousoff, !- Lighting Control Type
|
|
0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control
|
|
0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control
|
|
3, !- Number of Stepped Control Steps
|
|
1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control
|
|
Perimeter_mid_ZN_3_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name
|
|
0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg}
|
|
22.0, !- Maximum Allowable Discomfort Glare Index
|
|
, !- DElight Gridding Resolution {m2}
|
|
Perimeter_mid_ZN_3_DaylRefPt1, !- Daylighting Reference Point 1 Name
|
|
0.3835, !- Fraction of Zone Controlled by Reference Point 1
|
|
377, !- Illuminance Setpoint at Reference Point 1 {lux}
|
|
Perimeter_mid_ZN_3_DaylRefPt2, !- Daylighting Reference Point 2 Name
|
|
0.1395, !- Fraction of Zone Controlled by Reference Point 2
|
|
377; !- Illuminance Setpoint at Reference Point 2 {lux}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Perimeter_mid_ZN_3_DaylRefPt1, !- Name
|
|
Perimeter_mid_ZN_3, !- Zone Name
|
|
24.955500, !- X-Coordinate of Reference Point {m}
|
|
31.749800, !- Y-Coordinate of Reference Point {m}
|
|
4.724400; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Perimeter_mid_ZN_3_DaylRefPt2, !- Name
|
|
Perimeter_mid_ZN_3, !- Zone Name
|
|
24.955500, !- X-Coordinate of Reference Point {m}
|
|
30.225800, !- Y-Coordinate of Reference Point {m}
|
|
4.724400; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:Controls,
|
|
Perimeter_mid_ZN_4_DaylCtrl, !- Name
|
|
Perimeter_mid_ZN_4, !- Zone Name
|
|
SplitFlux, !- Daylighting Method
|
|
, !- Availability Schedule Name
|
|
Continuousoff, !- Lighting Control Type
|
|
0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control
|
|
0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control
|
|
3, !- Number of Stepped Control Steps
|
|
1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control
|
|
Perimeter_mid_ZN_4_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name
|
|
270.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg}
|
|
22.0, !- Maximum Allowable Discomfort Glare Index
|
|
, !- DElight Gridding Resolution {m2}
|
|
Perimeter_mid_ZN_4_DaylRefPt1, !- Daylighting Reference Point 1 Name
|
|
0.3835, !- Fraction of Zone Controlled by Reference Point 1
|
|
377, !- Illuminance Setpoint at Reference Point 1 {lux}
|
|
Perimeter_mid_ZN_4_DaylRefPt2, !- Daylighting Reference Point 2 Name
|
|
0.1395, !- Fraction of Zone Controlled by Reference Point 2
|
|
377; !- Illuminance Setpoint at Reference Point 2 {lux}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Perimeter_mid_ZN_4_DaylRefPt1, !- Name
|
|
Perimeter_mid_ZN_4, !- Zone Name
|
|
1.524000, !- X-Coordinate of Reference Point {m}
|
|
16.636900, !- Y-Coordinate of Reference Point {m}
|
|
4.724400; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Perimeter_mid_ZN_4_DaylRefPt2, !- Name
|
|
Perimeter_mid_ZN_4, !- Zone Name
|
|
3.048000, !- X-Coordinate of Reference Point {m}
|
|
16.636900, !- Y-Coordinate of Reference Point {m}
|
|
4.724400; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:Controls,
|
|
Perimeter_top_ZN_1_DaylCtrl, !- Name
|
|
Perimeter_top_ZN_1, !- Zone Name
|
|
SplitFlux, !- Daylighting Method
|
|
, !- Availability Schedule Name
|
|
Continuousoff, !- Lighting Control Type
|
|
0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control
|
|
0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control
|
|
3, !- Number of Stepped Control Steps
|
|
1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control
|
|
Perimeter_top_ZN_1_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name
|
|
180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg}
|
|
22.0, !- Maximum Allowable Discomfort Glare Index
|
|
, !- DElight Gridding Resolution {m2}
|
|
Perimeter_top_ZN_1_DaylRefPt1, !- Daylighting Reference Point 1 Name
|
|
0.3835, !- Fraction of Zone Controlled by Reference Point 1
|
|
377, !- Illuminance Setpoint at Reference Point 1 {lux}
|
|
Perimeter_top_ZN_1_DaylRefPt2, !- Daylighting Reference Point 2 Name
|
|
0.1395, !- Fraction of Zone Controlled by Reference Point 2
|
|
377; !- Illuminance Setpoint at Reference Point 2 {lux}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Perimeter_top_ZN_1_DaylRefPt1, !- Name
|
|
Perimeter_top_ZN_1, !- Zone Name
|
|
24.955500, !- X-Coordinate of Reference Point {m}
|
|
1.524000, !- Y-Coordinate of Reference Point {m}
|
|
8.687000; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Perimeter_top_ZN_1_DaylRefPt2, !- Name
|
|
Perimeter_top_ZN_1, !- Zone Name
|
|
24.955500, !- X-Coordinate of Reference Point {m}
|
|
3.048000, !- Y-Coordinate of Reference Point {m}
|
|
8.687000; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:Controls,
|
|
Perimeter_top_ZN_2_DaylCtrl, !- Name
|
|
Perimeter_top_ZN_2, !- Zone Name
|
|
SplitFlux, !- Daylighting Method
|
|
, !- Availability Schedule Name
|
|
Continuousoff, !- Lighting Control Type
|
|
0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control
|
|
0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control
|
|
3, !- Number of Stepped Control Steps
|
|
1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control
|
|
Perimeter_top_ZN_2_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name
|
|
90.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg}
|
|
22.0, !- Maximum Allowable Discomfort Glare Index
|
|
, !- DElight Gridding Resolution {m2}
|
|
Perimeter_top_ZN_2_DaylRefPt1, !- Daylighting Reference Point 1 Name
|
|
0.3835, !- Fraction of Zone Controlled by Reference Point 1
|
|
377, !- Illuminance Setpoint at Reference Point 1 {lux}
|
|
Perimeter_top_ZN_2_DaylRefPt2, !- Daylighting Reference Point 2 Name
|
|
0.1395, !- Fraction of Zone Controlled by Reference Point 2
|
|
377; !- Illuminance Setpoint at Reference Point 2 {lux}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Perimeter_top_ZN_2_DaylRefPt1, !- Name
|
|
Perimeter_top_ZN_2, !- Zone Name
|
|
48.387000, !- X-Coordinate of Reference Point {m}
|
|
16.636900, !- Y-Coordinate of Reference Point {m}
|
|
8.687000; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Perimeter_top_ZN_2_DaylRefPt2, !- Name
|
|
Perimeter_top_ZN_2, !- Zone Name
|
|
46.863000, !- X-Coordinate of Reference Point {m}
|
|
16.636900, !- Y-Coordinate of Reference Point {m}
|
|
8.687000; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:Controls,
|
|
Perimeter_top_ZN_3_DaylCtrl, !- Name
|
|
Perimeter_top_ZN_3, !- Zone Name
|
|
SplitFlux, !- Daylighting Method
|
|
, !- Availability Schedule Name
|
|
Continuousoff, !- Lighting Control Type
|
|
0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control
|
|
0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control
|
|
3, !- Number of Stepped Control Steps
|
|
1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control
|
|
Perimeter_top_ZN_3_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name
|
|
0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg}
|
|
22.0, !- Maximum Allowable Discomfort Glare Index
|
|
, !- DElight Gridding Resolution {m2}
|
|
Perimeter_top_ZN_3_DaylRefPt1, !- Daylighting Reference Point 1 Name
|
|
0.3835, !- Fraction of Zone Controlled by Reference Point 1
|
|
377, !- Illuminance Setpoint at Reference Point 1 {lux}
|
|
Perimeter_top_ZN_3_DaylRefPt2, !- Daylighting Reference Point 2 Name
|
|
0.1395, !- Fraction of Zone Controlled by Reference Point 2
|
|
377; !- Illuminance Setpoint at Reference Point 2 {lux}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Perimeter_top_ZN_3_DaylRefPt1, !- Name
|
|
Perimeter_top_ZN_3, !- Zone Name
|
|
24.955500, !- X-Coordinate of Reference Point {m}
|
|
31.749800, !- Y-Coordinate of Reference Point {m}
|
|
8.687000; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Perimeter_top_ZN_3_DaylRefPt2, !- Name
|
|
Perimeter_top_ZN_3, !- Zone Name
|
|
24.955500, !- X-Coordinate of Reference Point {m}
|
|
30.225800, !- Y-Coordinate of Reference Point {m}
|
|
8.687000; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:Controls,
|
|
Perimeter_top_ZN_4_DaylCtrl, !- Name
|
|
Perimeter_top_ZN_4, !- Zone Name
|
|
SplitFlux, !- Daylighting Method
|
|
, !- Availability Schedule Name
|
|
Continuousoff, !- Lighting Control Type
|
|
0.2, !- Minimum Input Power Fraction for Continuous or ContinuousOff Dimming Control
|
|
0.2, !- Minimum Light Output Fraction for Continuous or ContinuousOff Dimming Control
|
|
3, !- Number of Stepped Control Steps
|
|
1.0, !- Probability Lighting will be Reset When Needed in Manual Stepped Control
|
|
Perimeter_top_ZN_4_DaylRefPt1, !- Glare Calculation Daylighting Reference Point Name
|
|
270.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg}
|
|
22.0, !- Maximum Allowable Discomfort Glare Index
|
|
, !- DElight Gridding Resolution {m2}
|
|
Perimeter_top_ZN_4_DaylRefPt1, !- Daylighting Reference Point 1 Name
|
|
0.3835, !- Fraction of Zone Controlled by Reference Point 1
|
|
377, !- Illuminance Setpoint at Reference Point 1 {lux}
|
|
Perimeter_top_ZN_4_DaylRefPt2, !- Daylighting Reference Point 2 Name
|
|
0.1395, !- Fraction of Zone Controlled by Reference Point 2
|
|
377; !- Illuminance Setpoint at Reference Point 2 {lux}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Perimeter_top_ZN_4_DaylRefPt1, !- Name
|
|
Perimeter_top_ZN_4, !- Zone Name
|
|
1.524000, !- X-Coordinate of Reference Point {m}
|
|
16.636900, !- Y-Coordinate of Reference Point {m}
|
|
8.687000; !- Z-Coordinate of Reference Point {m}
|
|
|
|
Daylighting:ReferencePoint,
|
|
Perimeter_top_ZN_4_DaylRefPt2, !- Name
|
|
Perimeter_top_ZN_4, !- Zone Name
|
|
3.048000, !- X-Coordinate of Reference Point {m}
|
|
16.636900, !- Y-Coordinate of Reference Point {m}
|
|
8.687000; !- Z-Coordinate of Reference Point {m}
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: INFILTRATION ===========
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_top_ZN_3_Infiltration, !- Name
|
|
Perimeter_top_ZN_3, !- Zone or ZoneList Name
|
|
INFIL_SCH_PNNL, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
0, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
0, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.2240, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_top_ZN_2_Infiltration, !- Name
|
|
Perimeter_top_ZN_2, !- Zone or ZoneList Name
|
|
INFIL_SCH_PNNL, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
0, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
0, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.2240, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_top_ZN_1_Infiltration, !- Name
|
|
Perimeter_top_ZN_1, !- Zone or ZoneList Name
|
|
INFIL_SCH_PNNL, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
0, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
0, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.2240, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_top_ZN_4_Infiltration, !- Name
|
|
Perimeter_top_ZN_4, !- Zone or ZoneList Name
|
|
INFIL_SCH_PNNL, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
0, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
0, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.2240, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_bot_ZN_3_Infiltration, !- Name
|
|
Perimeter_bot_ZN_3, !- Zone or ZoneList Name
|
|
INFIL_SCH_PNNL, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
0, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
0, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.2240, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_bot_ZN_2_Infiltration, !- Name
|
|
Perimeter_bot_ZN_2, !- Zone or ZoneList Name
|
|
INFIL_SCH_PNNL, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
0, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
0, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.2240, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_bot_ZN_1_Infiltration, !- Name
|
|
Perimeter_bot_ZN_1, !- Zone or ZoneList Name
|
|
INFIL_SCH_PNNL, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
0, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
0, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.2240, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_bot_ZN_1_Door_Infiltration, !- Name
|
|
Perimeter_bot_ZN_1, !- Zone or ZoneList Name
|
|
INFIL_Door_Opening_SCH, !- Schedule Name
|
|
Flow/Zone, !- Design Flow Rate Calculation Method
|
|
0.678659786, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0, !- Constant Term Coefficient
|
|
0.0, !- Temperature Term Coefficient
|
|
0.0, !- Velocity Term Coefficient
|
|
0.0; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_bot_ZN_4_Infiltration, !- Name
|
|
Perimeter_bot_ZN_4, !- Zone or ZoneList Name
|
|
INFIL_SCH_PNNL, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
0, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
0, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.2240, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_mid_ZN_3_Infiltration, !- Name
|
|
Perimeter_mid_ZN_3, !- Zone or ZoneList Name
|
|
INFIL_SCH_PNNL, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
0, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
0, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.2240, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_mid_ZN_2_Infiltration, !- Name
|
|
Perimeter_mid_ZN_2, !- Zone or ZoneList Name
|
|
INFIL_SCH_PNNL, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
0, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
0, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.2240, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_mid_ZN_1_Infiltration, !- Name
|
|
Perimeter_mid_ZN_1, !- Zone or ZoneList Name
|
|
INFIL_SCH_PNNL, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
0, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
0, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.2240, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_mid_ZN_4_Infiltration, !- Name
|
|
Perimeter_mid_ZN_4, !- Zone or ZoneList Name
|
|
INFIL_SCH_PNNL, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
0, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
0, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.2240, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
FirstFloor_Plenum_Infiltration, !- Name
|
|
FirstFloor_Plenum, !- Zone or ZoneList Name
|
|
INFIL_SCH_PNNL, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
0, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
0, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.2240, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
MidFloor_Plenum_Infiltration, !- Name
|
|
MidFloor_Plenum, !- Zone or ZoneList Name
|
|
INFIL_SCH_PNNL, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
0, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
0, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.2240, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
TopFloor_Plenum_Infiltration, !- Name
|
|
TopFloor_Plenum, !- Zone or ZoneList Name
|
|
INFIL_SCH_PNNL, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
0, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
6.19256064e-05, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
0, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.2240, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SIZING PARAMETERS ===========
|
|
|
|
Sizing:Parameters,
|
|
1.0, !- Heating Sizing Factor
|
|
1.0, !- Cooling Sizing Factor
|
|
6; !- Timesteps in Averaging Window
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ZONE SIZING ===========
|
|
|
|
|
|
Sizing:Zone,
|
|
Core_bottom, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Core_bottom, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
0.0, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Core_bottom, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
|
|
|
|
Sizing:Zone,
|
|
Core_mid, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Core_mid, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
0.0, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Core_mid, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
|
|
|
|
Sizing:Zone,
|
|
Core_top, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Core_top, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
0.0, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Core_top, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
|
|
|
|
Sizing:Zone,
|
|
Perimeter_top_ZN_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Perimeter_top_ZN_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
0.0, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Perimeter_top_ZN_3, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
|
|
|
|
Sizing:Zone,
|
|
Perimeter_top_ZN_2, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Perimeter_top_ZN_2, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
0.0, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Perimeter_top_ZN_2, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
|
|
|
|
Sizing:Zone,
|
|
Perimeter_top_ZN_1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Perimeter_top_ZN_1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
0.0, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Perimeter_top_ZN_1, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
|
|
|
|
Sizing:Zone,
|
|
Perimeter_top_ZN_4, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Perimeter_top_ZN_4, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
0.0, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Perimeter_top_ZN_4, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
|
|
|
|
Sizing:Zone,
|
|
Perimeter_bot_ZN_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Perimeter_bot_ZN_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
0.0, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Perimeter_bot_ZN_3, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
|
|
|
|
Sizing:Zone,
|
|
Perimeter_bot_ZN_2, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Perimeter_bot_ZN_2, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
0.0, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Perimeter_bot_ZN_2, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
|
|
|
|
Sizing:Zone,
|
|
Perimeter_bot_ZN_1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Perimeter_bot_ZN_1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
0.0, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Perimeter_bot_ZN_1, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
|
|
|
|
Sizing:Zone,
|
|
Perimeter_bot_ZN_4, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Perimeter_bot_ZN_4, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
0.0, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Perimeter_bot_ZN_4, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
|
|
|
|
Sizing:Zone,
|
|
Perimeter_mid_ZN_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Perimeter_mid_ZN_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
0.0, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Perimeter_mid_ZN_3, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
|
|
|
|
Sizing:Zone,
|
|
Perimeter_mid_ZN_2, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Perimeter_mid_ZN_2, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
0.0, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Perimeter_mid_ZN_2, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0, !- Outdoor Air Flow per Zone {m3/s}
|
|
, !- Outdoor Air Flow Air Changes per Hour
|
|
PERIMETER_MID_ZN_2_OA_Mult; !- Outdoor Air Schedule Name
|
|
|
|
|
|
|
|
|
|
Sizing:Zone,
|
|
Perimeter_mid_ZN_1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Perimeter_mid_ZN_1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
0.0, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Perimeter_mid_ZN_1, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
|
|
|
|
Sizing:Zone,
|
|
Perimeter_mid_ZN_4, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Perimeter_mid_ZN_4, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
0.0, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0, !- Cooling Minimum Air Flow {m3/s}
|
|
0.0, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
0.0, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
VAV_Zone_AirDistribution;!- Design Specification Zone Air Distribution Object Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Perimeter_mid_ZN_4, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
VAV_Zone_AirDistribution, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
, !- Zone Air Distribution Effectiveness Schedule Name
|
|
, !- Zone Secondary Recirculation Fraction {dimensionless}
|
|
0.6; !- Minimum Zone Ventilation Efficiency {dimensionless}
|
|
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SYSTEM SIZING ===========
|
|
|
|
|
|
|
|
|
|
|
|
Sizing:System,
|
|
PACU_VAV_bot, !- AirLoop Name
|
|
Sensible, !- Type of Load to Size On
|
|
0.9561, !- Design Outdoor Air Flow Rate {m3/s}
|
|
0.3000, !- Central Heating Maximum System Air Flow Ratio
|
|
7.0, !- Preheat Design Temperature {C}
|
|
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Precool Design Temperature {C}
|
|
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Central Cooling Design Supply Air Temperature {C}
|
|
12.8000, !- Central Heating Design Supply Air Temperature {C}
|
|
Coincident, !- Type of Zone Sum to Use
|
|
No, !- 100% Outdoor Air in Cooling
|
|
No, !- 100% Outdoor Air in Heating
|
|
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
DesignDay, !- Cooling Supply Air Flow Rate Method
|
|
0.0, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
|
|
DesignDay, !- Heating Supply Air Flow Rate Method
|
|
0.0, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
|
|
ZoneSum; !- System Outdoor Air Method
|
|
|
|
|
|
Sizing:System,
|
|
PACU_VAV_mid, !- AirLoop Name
|
|
Sensible, !- Type of Load to Size On
|
|
0.9561, !- Design Outdoor Air Flow Rate {m3/s}
|
|
0.3000, !- Central Heating Maximum System Air Flow Ratio
|
|
7.0, !- Preheat Design Temperature {C}
|
|
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Precool Design Temperature {C}
|
|
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Central Cooling Design Supply Air Temperature {C}
|
|
12.8000, !- Central Heating Design Supply Air Temperature {C}
|
|
Coincident, !- Type of Zone Sum to Use
|
|
No, !- 100% Outdoor Air in Cooling
|
|
No, !- 100% Outdoor Air in Heating
|
|
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
DesignDay, !- Cooling Supply Air Flow Rate Method
|
|
0.0, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
|
|
DesignDay, !- Heating Supply Air Flow Rate Method
|
|
0.0, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
|
|
ZoneSum; !- System Outdoor Air Method
|
|
|
|
|
|
Sizing:System,
|
|
PACU_VAV_top, !- AirLoop Name
|
|
Sensible, !- Type of Load to Size On
|
|
0.9561, !- Design Outdoor Air Flow Rate {m3/s}
|
|
0.3000, !- Central Heating Maximum System Air Flow Ratio
|
|
7.0, !- Preheat Design Temperature {C}
|
|
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Precool Design Temperature {C}
|
|
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Central Cooling Design Supply Air Temperature {C}
|
|
12.8000, !- Central Heating Design Supply Air Temperature {C}
|
|
Coincident, !- Type of Zone Sum to Use
|
|
No, !- 100% Outdoor Air in Cooling
|
|
No, !- 100% Outdoor Air in Heating
|
|
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
DesignDay, !- Cooling Supply Air Flow Rate Method
|
|
0.0, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
|
|
DesignDay, !- Heating Supply Air Flow Rate Method
|
|
0.0, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
|
|
ZoneSum; !- System Outdoor Air Method
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: PLANT SIZING ===========
|
|
|
|
Sizing:Plant,
|
|
SHWSys1, !- Plant or Condenser Loop Name
|
|
Heating, !- Loop Type
|
|
60, !- Design Loop Exit Temperature {C} !- this is changed from 48.9 to 60 to fix the warning message.
|
|
5.0; !- Loop Design Temperature Difference {deltaC}
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CURVE:BIQUADRATIC ===========
|
|
|
|
Curve:Biquadratic,
|
|
FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_CapFT, !- Name
|
|
1.39072, !- Coefficient1 Constant
|
|
-0.0529058, !- Coefficient2 x
|
|
0.0018423, !- Coefficient3 x**2
|
|
0.00058267, !- Coefficient4 y
|
|
-0.000186814, !- Coefficient5 y**2
|
|
0.000265159, !- Coefficient6 x*y
|
|
16.5556, !- Minimum Value of x
|
|
22.1111, !- Maximum Value of x
|
|
23.7778, !- Minimum Value of y
|
|
47.66; !- Maximum Value of y
|
|
|
|
Curve:Biquadratic,
|
|
FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_EIRFT, !- Name
|
|
-0.536161, !- Coefficient1 Constant
|
|
0.105138, !- Coefficient2 x
|
|
-0.00172659, !- Coefficient3 x**2
|
|
0.0149848, !- Coefficient4 y
|
|
0.000659948, !- Coefficient5 y**2
|
|
-0.0017385, !- Coefficient6 x*y
|
|
16.5556, !- Minimum Value of x
|
|
22.1111, !- Maximum Value of x
|
|
23.7778, !- Minimum Value of y
|
|
47.66; !- Maximum Value of y
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CURVE:QUADRATIC ===========
|
|
|
|
Curve:Quadratic,
|
|
FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_FFF, !- Name
|
|
0.718954, !- Coefficient1 Constant
|
|
0.435436, !- Coefficient2 x
|
|
-0.154193, !- Coefficient3 x**2
|
|
0.75, !- Minimum Value of x
|
|
1.25; !- Maximum Value of x
|
|
|
|
Curve:Quadratic,
|
|
FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_EIRFFF, !- Name
|
|
1.19525, !- Coefficient1 Constant
|
|
-0.306138, !- Coefficient2 x
|
|
0.110973, !- Coefficient3 x**2
|
|
0.75, !- Minimum Value of x
|
|
1.25; !- Maximum Value of x
|
|
|
|
Curve:Quadratic,
|
|
FURNACE_PACU_VAV_CoolCIEA_HVAC_BESTEST_9ton-PLR, !- Name
|
|
0.771, !- Coefficient1 Constant
|
|
0.229, !- Coefficient2 x
|
|
0.0, !- Coefficient3 x**2
|
|
0.0, !- Minimum Value of x
|
|
1.0; !- Maximum Value of x
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: NODE LIST ===========
|
|
|
|
NodeList,
|
|
Core_bottom Inlet Nodes, !- Name
|
|
Core_bottom VAV Box Outlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Core_mid Inlet Nodes, !- Name
|
|
Core_mid VAV Box Outlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Core_top Inlet Nodes, !- Name
|
|
Core_top VAV Box Outlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Perimeter_top_ZN_3 Inlet Nodes, !- Name
|
|
Perimeter_top_ZN_3 VAV Box Outlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Perimeter_top_ZN_2 Inlet Nodes, !- Name
|
|
Perimeter_top_ZN_2 VAV Box Outlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Perimeter_top_ZN_1 Inlet Nodes, !- Name
|
|
Perimeter_top_ZN_1 VAV Box Outlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Perimeter_top_ZN_4 Inlet Nodes, !- Name
|
|
Perimeter_top_ZN_4 VAV Box Outlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Perimeter_bot_ZN_3 Inlet Nodes, !- Name
|
|
Perimeter_bot_ZN_3 VAV Box Outlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Perimeter_bot_ZN_2 Inlet Nodes, !- Name
|
|
Perimeter_bot_ZN_2 VAV Box Outlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Perimeter_bot_ZN_1 Inlet Nodes, !- Name
|
|
Perimeter_bot_ZN_1 VAV Box Outlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Perimeter_bot_ZN_4 Inlet Nodes, !- Name
|
|
Perimeter_bot_ZN_4 VAV Box Outlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Perimeter_mid_ZN_3 Inlet Nodes, !- Name
|
|
Perimeter_mid_ZN_3 VAV Box Outlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Perimeter_mid_ZN_2 Inlet Nodes, !- Name
|
|
Perimeter_mid_ZN_2 VAV Box Outlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Perimeter_mid_ZN_1 Inlet Nodes, !- Name
|
|
Perimeter_mid_ZN_1 VAV Box Outlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Perimeter_mid_ZN_4 Inlet Nodes, !- Name
|
|
Perimeter_mid_ZN_4 VAV Box Outlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
PACU_VAV_bot_OANode List,!- Name
|
|
PACU_VAV_bot_OAInlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
PACU_VAV_mid_OANode List,!- Name
|
|
PACU_VAV_mid_OAInlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
PACU_VAV_top_OANode List,!- Name
|
|
PACU_VAV_top_OAInlet Node; !- Node 1 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: BRANCH LIST ===========
|
|
|
|
BranchList,
|
|
PACU_VAV_bot Air Loop Branches, !- Name
|
|
PACU_VAV_bot Air Loop Main Branch; !- Branch 1 Name
|
|
|
|
BranchList,
|
|
PACU_VAV_mid Air Loop Branches, !- Name
|
|
PACU_VAV_mid Air Loop Main Branch; !- Branch 1 Name
|
|
|
|
BranchList,
|
|
PACU_VAV_top Air Loop Branches, !- Name
|
|
PACU_VAV_top Air Loop Main Branch; !- Branch 1 Name
|
|
|
|
BranchList,
|
|
SHWSys1 Supply Branches, !- Name
|
|
SHWSys1 Supply Inlet Branch, !- Branch 1 Name
|
|
SHWSys1 Supply Equipment Branch, !- Branch 2 Name
|
|
SHWSys1 Supply Equipment Bypass Branch, !- Branch 3 Name
|
|
SHWSys1 Supply Outlet Branch; !- Branch 4 Name
|
|
|
|
BranchList,
|
|
SHWSys1 Demand Branches, !- Name
|
|
SHWSys1 Demand Inlet Branch, !- Branch 1 Name
|
|
SHWSys1 Demand Load Branch 1, !- Branch 2 Name
|
|
SHWSys1 Demand Load Branch 2, !- Branch 3 Name
|
|
SHWSys1 Demand Load Branch 3, !- Branch 4 Name
|
|
SHWSys1 Demand Load Branch 4, !- Branch 5 Name
|
|
SHWSys1 Demand Load Branch 5, !- Branch 6 Name
|
|
SHWSys1 Demand Load Branch 6, !- Branch 7 Name
|
|
SHWSys1 Demand Load Branch 7, !- Branch 8 Name
|
|
SHWSys1 Demand Load Branch 8, !- Branch 9 Name
|
|
SHWSys1 Demand Load Branch 9, !- Branch 10 Name
|
|
SHWSys1 Demand Load Branch 10, !- Branch 11 Name
|
|
SHWSys1 Demand Load Branch 11, !- Branch 12 Name
|
|
SHWSys1 Demand Load Branch 12, !- Branch 13 Name
|
|
SHWSys1 Demand Load Branch 13, !- Branch 14 Name
|
|
SHWSys1 Demand Load Branch 14, !- Branch 15 Name
|
|
SHWSys1 Demand Load Branch 15, !- Branch 16 Name
|
|
SHWSys1 Demand Bypass Branch, !- Branch 17 Name
|
|
SHWSys1 Demand Outlet Branch; !- Branch 18 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CONNECTOR LIST ===========
|
|
|
|
ConnectorList,
|
|
SHWSys1 Supply Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
SHWSys1 Supply Splitter, !- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
SHWSys1 Supply Mixer; !- Connector 2 Name
|
|
|
|
ConnectorList,
|
|
SHWSys1 Demand Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
SHWSys1 Demand Splitter, !- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
SHWSys1 Demand Mixer; !- Connector 2 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: BRANCH ===========
|
|
|
|
Branch,
|
|
PACU_VAV_bot Air Loop Main Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
|
|
PACU_VAV_bot_OA, !- Component 1 Name
|
|
PACU_VAV_bot Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
|
|
PACU_VAV_bot_OA-PACU_VAV_bot_CoolCNode, !- Component 1 Outlet Node Name
|
|
CoilSystem:Cooling:DX, !- Component 2 Object Type
|
|
PACU_VAV_bot_CoolC, !- Component 2 Name
|
|
PACU_VAV_bot_OA-PACU_VAV_bot_CoolCNode, !- Component 2 Inlet Node Name
|
|
PACU_VAV_bot_CoolC-PACU_VAV_bot_HeatCNode, !- Component 2 Outlet Node Name
|
|
Coil:Heating:Fuel, !- Component 3 Object Type
|
|
PACU_VAV_bot_HeatC, !- Component 3 Name
|
|
PACU_VAV_bot_CoolC-PACU_VAV_bot_HeatCNode, !- Component 3 Inlet Node Name
|
|
PACU_VAV_bot_HeatC-PACU_VAV_bot FanNode, !- Component 3 Outlet Node Name
|
|
Fan:VariableVolume, !- Component 4 Object Type
|
|
PACU_VAV_bot Fan, !- Component 4 Name
|
|
PACU_VAV_bot_HeatC-PACU_VAV_bot FanNode, !- Component 4 Inlet Node Name
|
|
PACU_VAV_bot Supply Equipment Outlet Node; !- Component 4 Outlet Node Name
|
|
|
|
Branch,
|
|
PACU_VAV_mid Air Loop Main Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
|
|
PACU_VAV_mid_OA, !- Component 1 Name
|
|
PACU_VAV_mid Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
|
|
PACU_VAV_mid_OA-PACU_VAV_mid_CoolCNode, !- Component 1 Outlet Node Name
|
|
CoilSystem:Cooling:DX, !- Component 2 Object Type
|
|
PACU_VAV_mid_CoolC, !- Component 2 Name
|
|
PACU_VAV_mid_OA-PACU_VAV_mid_CoolCNode, !- Component 2 Inlet Node Name
|
|
PACU_VAV_mid_CoolC-PACU_VAV_mid_HeatCNode, !- Component 2 Outlet Node Name
|
|
Coil:Heating:Fuel, !- Component 3 Object Type
|
|
PACU_VAV_mid_HeatC, !- Component 3 Name
|
|
PACU_VAV_mid_CoolC-PACU_VAV_mid_HeatCNode, !- Component 3 Inlet Node Name
|
|
PACU_VAV_mid_HeatC-PACU_VAV_mid FanNode, !- Component 3 Outlet Node Name
|
|
Fan:VariableVolume, !- Component 4 Object Type
|
|
PACU_VAV_mid Fan, !- Component 4 Name
|
|
PACU_VAV_mid_HeatC-PACU_VAV_mid FanNode, !- Component 4 Inlet Node Name
|
|
PACU_VAV_mid Supply Equipment Outlet Node; !- Component 4 Outlet Node Name
|
|
|
|
Branch,
|
|
PACU_VAV_top Air Loop Main Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
|
|
PACU_VAV_top_OA, !- Component 1 Name
|
|
PACU_VAV_top Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
|
|
PACU_VAV_top_OA-PACU_VAV_top_CoolCNode, !- Component 1 Outlet Node Name
|
|
CoilSystem:Cooling:DX, !- Component 2 Object Type
|
|
PACU_VAV_top_CoolC, !- Component 2 Name
|
|
PACU_VAV_top_OA-PACU_VAV_top_CoolCNode, !- Component 2 Inlet Node Name
|
|
PACU_VAV_top_CoolC-PACU_VAV_top_HeatCNode, !- Component 2 Outlet Node Name
|
|
Coil:Heating:Fuel, !- Component 3 Object Type
|
|
PACU_VAV_top_HeatC, !- Component 3 Name
|
|
PACU_VAV_top_CoolC-PACU_VAV_top_HeatCNode, !- Component 3 Inlet Node Name
|
|
PACU_VAV_top_HeatC-PACU_VAV_top FanNode, !- Component 3 Outlet Node Name
|
|
Fan:VariableVolume, !- Component 4 Object Type
|
|
PACU_VAV_top Fan, !- Component 4 Name
|
|
PACU_VAV_top_HeatC-PACU_VAV_top FanNode, !- Component 4 Inlet Node Name
|
|
PACU_VAV_top Supply Equipment Outlet Node; !- Component 4 Outlet Node Name
|
|
|
|
|
|
|
|
Branch,
|
|
SHWSys1 Supply Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pump:ConstantSpeed, !- Component 1 Object Type
|
|
SHWSys1 Pump, !- Component 1 Name
|
|
SHWSys1 Supply Inlet Node, !- Component 1 Inlet Node Name
|
|
SHWSys1 Pump-SHWSys1 Water HeaterNodeviaConnector; !- Component 1 Outlet Node Name
|
|
|
|
|
|
|
|
Branch,
|
|
SHWSys1 Supply Equipment Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterHeater:Mixed, !- Component 1 Object Type
|
|
SHWSys1 Water Heater, !- Component 1 Name
|
|
SHWSys1 Pump-SHWSys1 Water HeaterNode, !- Component 1 Inlet Node Name
|
|
SHWSys1 Supply Equipment Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SHWSys1 Supply Equipment Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SHWSys1 Supply Equipment Bypass Pipe, !- Component 1 Name
|
|
SHWSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name
|
|
SHWSys1 Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SHWSys1 Supply Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SHWSys1 Supply Outlet Pipe, !- Component 1 Name
|
|
SHWSys1 Supply Mixer-SHWSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name
|
|
SHWSys1 Supply Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SHWSys1 Demand Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SHWSys1 Demand Inlet Pipe, !- Component 1 Name
|
|
SHWSys1 Demand Inlet Node, !- Component 1 Inlet Node Name
|
|
SHWSys1 Demand Inlet Pipe-SHWSys1 Demand Mixer; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SHWSys1 Demand Load Branch 1, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Core_bottom sub cat, !- Component 1 Name
|
|
Core_bottom sub cat Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Core_bottom sub cat Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SHWSys1 Demand Load Branch 2, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Core_mid sub cat, !- Component 1 Name
|
|
Core_mid sub cat Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Core_mid sub cat Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SHWSys1 Demand Load Branch 3, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Core_top sub cat, !- Component 1 Name
|
|
Core_top sub cat Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Core_top sub cat Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SHWSys1 Demand Load Branch 4, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Perimeter_top_ZN_3 sub cat, !- Component 1 Name
|
|
Perimeter_top_ZN_3 sub cat Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Perimeter_top_ZN_3 sub cat Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SHWSys1 Demand Load Branch 5, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Perimeter_top_ZN_2 sub cat, !- Component 1 Name
|
|
Perimeter_top_ZN_2 sub cat Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Perimeter_top_ZN_2 sub cat Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SHWSys1 Demand Load Branch 6, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Perimeter_top_ZN_1 sub cat, !- Component 1 Name
|
|
Perimeter_top_ZN_1 sub cat Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Perimeter_top_ZN_1 sub cat Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SHWSys1 Demand Load Branch 7, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Perimeter_top_ZN_4 sub cat, !- Component 1 Name
|
|
Perimeter_top_ZN_4 sub cat Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Perimeter_top_ZN_4 sub cat Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SHWSys1 Demand Load Branch 8, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Perimeter_bot_ZN_3 sub cat, !- Component 1 Name
|
|
Perimeter_bot_ZN_3 sub cat Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Perimeter_bot_ZN_3 sub cat Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SHWSys1 Demand Load Branch 9, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Perimeter_bot_ZN_2 sub cat, !- Component 1 Name
|
|
Perimeter_bot_ZN_2 sub cat Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Perimeter_bot_ZN_2 sub cat Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SHWSys1 Demand Load Branch 10, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Perimeter_bot_ZN_1 sub cat, !- Component 1 Name
|
|
Perimeter_bot_ZN_1 sub cat Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Perimeter_bot_ZN_1 sub cat Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SHWSys1 Demand Load Branch 11, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Perimeter_bot_ZN_4 sub cat, !- Component 1 Name
|
|
Perimeter_bot_ZN_4 sub cat Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Perimeter_bot_ZN_4 sub cat Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SHWSys1 Demand Load Branch 12, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Perimeter_mid_ZN_3 sub cat, !- Component 1 Name
|
|
Perimeter_mid_ZN_3 sub cat Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Perimeter_mid_ZN_3 sub cat Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SHWSys1 Demand Load Branch 13, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Perimeter_mid_ZN_2 sub cat, !- Component 1 Name
|
|
Perimeter_mid_ZN_2 sub cat Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Perimeter_mid_ZN_2 sub cat Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SHWSys1 Demand Load Branch 14, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Perimeter_mid_ZN_1 sub cat, !- Component 1 Name
|
|
Perimeter_mid_ZN_1 sub cat Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Perimeter_mid_ZN_1 sub cat Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SHWSys1 Demand Load Branch 15, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Perimeter_mid_ZN_4 sub cat, !- Component 1 Name
|
|
Perimeter_mid_ZN_4 sub cat Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Perimeter_mid_ZN_4 sub cat Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SHWSys1 Demand Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SHWSys1 Demand Bypass Pipe, !- Component 1 Name
|
|
SHWSys1 Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name
|
|
SHWSys1 Demand Bypass Pipe Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SHWSys1 Demand Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SHWSys1 Demand Outlet Pipe, !- Component 1 Name
|
|
SHWSys1 Demand Mixer-SHWSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name
|
|
SHWSys1 Demand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: PIPE ===========
|
|
|
|
Pipe:Adiabatic,
|
|
SHWSys1 Supply Equipment Bypass Pipe, !- Name
|
|
SHWSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name
|
|
SHWSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
SHWSys1 Supply Outlet Pipe, !- Name
|
|
SHWSys1 Supply Mixer-SHWSys1 Supply Outlet Pipe, !- Inlet Node Name
|
|
SHWSys1 Supply Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
SHWSys1 Demand Inlet Pipe, !- Name
|
|
SHWSys1 Demand Inlet Node, !- Inlet Node Name
|
|
SHWSys1 Demand Inlet Pipe-SHWSys1 Demand Mixer; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
SHWSys1 Demand Bypass Pipe, !- Name
|
|
SHWSys1 Demand Bypass Pipe Inlet Node, !- Inlet Node Name
|
|
SHWSys1 Demand Bypass Pipe Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
SHWSys1 Demand Outlet Pipe, !- Name
|
|
SHWSys1 Demand Mixer-SHWSys1 Demand Outlet Pipe, !- Inlet Node Name
|
|
SHWSys1 Demand Outlet Node; !- Outlet Node Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: PLANT LOOP ===========
|
|
|
|
|
|
PlantLoop,
|
|
SHWSys1, !- Name
|
|
WATER, !- Fluid Type
|
|
, !- User Defined Fluid Type
|
|
SHWSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name
|
|
SHWSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name
|
|
60, !- Maximum Loop Temperature {C}
|
|
10.0, !- Minimum Loop Temperature {C}
|
|
AUTOSIZE, !- Maximum Loop Flow Rate {m3/s}
|
|
0.0, !- Minimum Loop Flow Rate {m3/s}
|
|
AUTOSIZE, !- Plant Loop Volume {m3}
|
|
SHWSys1 Supply Inlet Node, !- Plant Side Inlet Node Name
|
|
SHWSys1 Supply Outlet Node, !- Plant Side Outlet Node Name
|
|
SHWSys1 Supply Branches, !- Plant Side Branch List Name
|
|
SHWSys1 Supply Connectors, !- Plant Side Connector List Name
|
|
SHWSys1 Demand Inlet Node, !- Demand Side Inlet Node Name
|
|
SHWSys1 Demand Outlet Node, !- Demand Side Outlet Node Name
|
|
SHWSys1 Demand Branches, !- Demand Side Branch List Name
|
|
SHWSys1 Demand Connectors, !- Demand Side Connector List Name
|
|
Optimal; !- Load Distribution Scheme
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: PLANT OPERATION SCHEMES ===========
|
|
|
|
PlantEquipmentOperationSchemes,
|
|
SHWSys1 Loop Operation Scheme List, !- Name
|
|
PlantEquipmentOperation:HeatingLoad, !- Control Scheme 1 Object Type
|
|
SHWSys1 Operation Scheme,!- Control Scheme 1 Name
|
|
PlantOnSched; !- Control Scheme 1 Schedule Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: HEATING LOAD RANGE BASED OPERATION ===========
|
|
|
|
PlantEquipmentOperation:HeatingLoad,
|
|
SHWSys1 Operation Scheme,!- Name
|
|
0.0, !- Load Range 1 Lower Limit {W}
|
|
1000000000000000, !- Load Range 1 Upper Limit {W}
|
|
SHWSys1 Equipment List; !- Range 1 Equipment List Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: PLANT EQUIPMENT LIST ===========
|
|
|
|
PlantEquipmentList,
|
|
SHWSys1 Equipment List, !- Name
|
|
WaterHeater:Mixed, !- Equipment 1 Object Type
|
|
SHWSys1 Water Heater; !- Equipment 1 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SPLITTER ===========
|
|
|
|
Connector:Splitter,
|
|
SHWSys1 Supply Splitter, !- Name
|
|
SHWSys1 Supply Inlet Branch, !- Inlet Branch Name
|
|
SHWSys1 Supply Equipment Branch, !- Outlet Branch 1 Name
|
|
SHWSys1 Supply Equipment Bypass Branch; !- Outlet Branch 2 Name
|
|
|
|
Connector:Splitter,
|
|
SHWSys1 Demand Splitter, !- Name
|
|
SHWSys1 Demand Inlet Branch, !- Inlet Branch Name
|
|
SHWSys1 Demand Load Branch 1, !- Outlet Branch 1 Name
|
|
SHWSys1 Demand Load Branch 2, !- Outlet Branch 2 Name
|
|
SHWSys1 Demand Load Branch 3, !- Outlet Branch 3 Name
|
|
SHWSys1 Demand Load Branch 4, !- Outlet Branch 4 Name
|
|
SHWSys1 Demand Load Branch 5, !- Outlet Branch 5 Name
|
|
SHWSys1 Demand Load Branch 6, !- Outlet Branch 6 Name
|
|
SHWSys1 Demand Load Branch 7, !- Outlet Branch 7 Name
|
|
SHWSys1 Demand Load Branch 8, !- Outlet Branch 8 Name
|
|
SHWSys1 Demand Load Branch 9, !- Outlet Branch 9 Name
|
|
SHWSys1 Demand Load Branch 10, !- Outlet Branch 10 Name
|
|
SHWSys1 Demand Load Branch 11, !- Outlet Branch 11 Name
|
|
SHWSys1 Demand Load Branch 12, !- Outlet Branch 12 Name
|
|
SHWSys1 Demand Load Branch 13, !- Outlet Branch 13 Name
|
|
SHWSys1 Demand Load Branch 14, !- Outlet Branch 14 Name
|
|
SHWSys1 Demand Load Branch 15, !- Outlet Branch 15 Name
|
|
SHWSys1 Demand Bypass Branch; !- Outlet Branch 16 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: MIXER ===========
|
|
|
|
Connector:Mixer,
|
|
SHWSys1 Supply Mixer, !- Name
|
|
SHWSys1 Supply Outlet Branch, !- Outlet Branch Name
|
|
SHWSys1 Supply Equipment Branch, !- Inlet Branch 1 Name
|
|
SHWSys1 Supply Equipment Bypass Branch; !- Inlet Branch 2 Name
|
|
|
|
Connector:Mixer,
|
|
SHWSys1 Demand Mixer, !- Name
|
|
SHWSys1 Demand Outlet Branch, !- Outlet Branch Name
|
|
SHWSys1 Demand Load Branch 1, !- Inlet Branch 1 Name
|
|
SHWSys1 Demand Load Branch 2, !- Inlet Branch 2 Name
|
|
SHWSys1 Demand Load Branch 3, !- Inlet Branch 3 Name
|
|
SHWSys1 Demand Load Branch 4, !- Inlet Branch 4 Name
|
|
SHWSys1 Demand Load Branch 5, !- Inlet Branch 5 Name
|
|
SHWSys1 Demand Load Branch 6, !- Inlet Branch 6 Name
|
|
SHWSys1 Demand Load Branch 7, !- Inlet Branch 7 Name
|
|
SHWSys1 Demand Load Branch 8, !- Inlet Branch 8 Name
|
|
SHWSys1 Demand Load Branch 9, !- Inlet Branch 9 Name
|
|
SHWSys1 Demand Load Branch 10, !- Inlet Branch 10 Name
|
|
SHWSys1 Demand Load Branch 11, !- Inlet Branch 11 Name
|
|
SHWSys1 Demand Load Branch 12, !- Inlet Branch 12 Name
|
|
SHWSys1 Demand Load Branch 13, !- Inlet Branch 13 Name
|
|
SHWSys1 Demand Load Branch 14, !- Inlet Branch 14 Name
|
|
SHWSys1 Demand Load Branch 15, !- Inlet Branch 15 Name
|
|
SHWSys1 Demand Bypass Branch; !- Inlet Branch 16 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AIR PRIMARY LOOP ===========
|
|
|
|
|
|
AirLoopHVAC,
|
|
PACU_VAV_bot, !- Name
|
|
, !- Controller List Name
|
|
PACU_VAV_bot Availability Manager List, !- Availability Manager List Name
|
|
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
|
|
PACU_VAV_bot Air Loop Branches, !- Branch List Name
|
|
, !- Connector List Name
|
|
PACU_VAV_bot Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
|
|
PACU_VAV_bot Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
|
|
PACU_VAV_bot Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
|
|
PACU_VAV_bot Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
|
|
|
|
AirLoopHVAC,
|
|
PACU_VAV_mid, !- Name
|
|
, !- Controller List Name
|
|
PACU_VAV_mid Availability Manager List, !- Availability Manager List Name
|
|
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
|
|
PACU_VAV_mid Air Loop Branches, !- Branch List Name
|
|
, !- Connector List Name
|
|
PACU_VAV_mid Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
|
|
PACU_VAV_mid Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
|
|
PACU_VAV_mid Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
|
|
PACU_VAV_mid Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
|
|
|
|
AirLoopHVAC,
|
|
PACU_VAV_top, !- Name
|
|
, !- Controller List Name
|
|
PACU_VAV_top Availability Manager List, !- Availability Manager List Name
|
|
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
|
|
PACU_VAV_top Air Loop Branches, !- Branch List Name
|
|
, !- Connector List Name
|
|
PACU_VAV_top Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
|
|
PACU_VAV_top Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
|
|
PACU_VAV_top Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
|
|
PACU_VAV_top Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CONTROLLER LIST ===========
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
PACU_VAV_bot_OA_Controllers, !- Name
|
|
Controller:OutdoorAir, !- Controller 1 Object Type
|
|
PACU_VAV_bot_OA_Controller; !- Controller 1 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
PACU_VAV_mid_OA_Controllers, !- Name
|
|
Controller:OutdoorAir, !- Controller 1 Object Type
|
|
PACU_VAV_mid_OA_Controller; !- Controller 1 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
PACU_VAV_top_OA_Controllers, !- Name
|
|
Controller:OutdoorAir, !- Controller 1 Object Type
|
|
PACU_VAV_top_OA_Controller; !- Controller 1 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AIR LOOP EQUIPMENT LIST ===========
|
|
|
|
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
|
|
PACU_VAV_bot_OA_Equipment, !- Name
|
|
OutdoorAir:Mixer, !- Component 1 Object Type
|
|
PACU_VAV_bot_OAMixing Box; !- Component 1 Name
|
|
|
|
|
|
|
|
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
|
|
PACU_VAV_mid_OA_Equipment, !- Name
|
|
OutdoorAir:Mixer, !- Component 1 Object Type
|
|
PACU_VAV_mid_OAMixing Box; !- Component 1 Name
|
|
|
|
|
|
|
|
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
|
|
PACU_VAV_top_OA_Equipment, !- Name
|
|
OutdoorAir:Mixer, !- Component 1 Object Type
|
|
PACU_VAV_top_OAMixing Box; !- Component 1 Name
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTSIDE AIR SYSTEM ===========
|
|
|
|
AirLoopHVAC:OutdoorAirSystem,
|
|
PACU_VAV_bot_OA, !- Name
|
|
PACU_VAV_bot_OA_Controllers, !- Controller List Name
|
|
PACU_VAV_bot_OA_Equipment, !- Outdoor Air Equipment List Name
|
|
PACU_VAV_bot Availability Manager List; !- Availability Manager List Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem,
|
|
PACU_VAV_mid_OA, !- Name
|
|
PACU_VAV_mid_OA_Controllers, !- Controller List Name
|
|
PACU_VAV_mid_OA_Equipment, !- Outdoor Air Equipment List Name
|
|
PACU_VAV_mid Availability Manager List; !- Availability Manager List Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem,
|
|
PACU_VAV_top_OA, !- Name
|
|
PACU_VAV_top_OA_Controllers, !- Controller List Name
|
|
PACU_VAV_top_OA_Equipment, !- Outdoor Air Equipment List Name
|
|
PACU_VAV_top Availability Manager List; !- Availability Manager List Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTSIDE AIR NODE ===========
|
|
|
|
OutdoorAir:Node,
|
|
PACU_VAV_bot_CoolC Cond OA node; !- Name
|
|
|
|
OutdoorAir:Node,
|
|
PACU_VAV_bot_CoolCOA Ref node; !- Name
|
|
|
|
OutdoorAir:Node,
|
|
PACU_VAV_mid_CoolC Cond OA node; !- Name
|
|
|
|
OutdoorAir:Node,
|
|
PACU_VAV_mid_CoolCOA Ref node; !- Name
|
|
|
|
OutdoorAir:Node,
|
|
PACU_VAV_top_CoolC Cond OA node; !- Name
|
|
|
|
OutdoorAir:Node,
|
|
PACU_VAV_top_CoolCOA Ref node; !- Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTSIDE AIR INLET NODE LIST ===========
|
|
|
|
OutdoorAir:NodeList,
|
|
PACU_VAV_bot_OANode List;!- Node or NodeList Name 1
|
|
|
|
OutdoorAir:NodeList,
|
|
PACU_VAV_mid_OANode List;!- Node or NodeList Name 1
|
|
|
|
OutdoorAir:NodeList,
|
|
PACU_VAV_top_OANode List;!- Node or NodeList Name 1
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTSIDE AIR MIXER ===========
|
|
OutdoorAir:Mixer,
|
|
PACU_VAV_bot_OAMixing Box, !- Name
|
|
PACU_VAV_bot_OA-PACU_VAV_bot_CoolCNode, !- Mixed Air Node Name
|
|
PACU_VAV_bot_OAInlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name
|
|
PACU_VAV_bot_OARelief Node, !- Relief Air Stream Node Name
|
|
PACU_VAV_bot Supply Equipment Inlet Node; !- Return Air Stream Node Name
|
|
OutdoorAir:Mixer,
|
|
PACU_VAV_mid_OAMixing Box, !- Name
|
|
PACU_VAV_mid_OA-PACU_VAV_mid_CoolCNode, !- Mixed Air Node Name
|
|
PACU_VAV_mid_OAInlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name
|
|
PACU_VAV_mid_OARelief Node, !- Relief Air Stream Node Name
|
|
PACU_VAV_mid Supply Equipment Inlet Node; !- Return Air Stream Node Name
|
|
OutdoorAir:Mixer,
|
|
PACU_VAV_top_OAMixing Box, !- Name
|
|
PACU_VAV_top_OA-PACU_VAV_top_CoolCNode, !- Mixed Air Node Name
|
|
PACU_VAV_top_OAInlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name
|
|
PACU_VAV_top_OARelief Node, !- Relief Air Stream Node Name
|
|
PACU_VAV_top Supply Equipment Inlet Node; !- Return Air Stream Node Name
|
|
!- =========== ALL OBJECTS IN CLASS: SYSTEM AVAILABILITY MANAGER LIST ===========
|
|
|
|
AvailabilityManagerAssignmentList,
|
|
PACU_VAV_bot Availability Manager List, !- Name
|
|
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
|
|
PACU_VAV_bot Availability Manager; !- Availability Manager 1 Name
|
|
|
|
AvailabilityManagerAssignmentList,
|
|
PACU_VAV_mid Availability Manager List, !- Name
|
|
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
|
|
PACU_VAV_mid Availability Manager; !- Availability Manager 1 Name
|
|
|
|
AvailabilityManagerAssignmentList,
|
|
PACU_VAV_top Availability Manager List, !- Name
|
|
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
|
|
PACU_VAV_top Availability Manager; !- Availability Manager 1 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SYSTEM AVAILABILITY MANAGER:NIGHT CYCLE ===========
|
|
|
|
AvailabilityManager:NightCycle,
|
|
PACU_VAV_bot Availability Manager, !- Name
|
|
Always_On, !- Applicability Schedule Name
|
|
HVACOperationSchd, !- Fan Schedule Name
|
|
CycleOnAny, !- Control Type
|
|
1.0, !- Thermostat Tolerance {deltaC}
|
|
FixedRunTime, !- Cycling Run Time Control Type
|
|
1800; !- Cycling Run Time {s}
|
|
|
|
AvailabilityManager:NightCycle,
|
|
PACU_VAV_mid Availability Manager, !- Name
|
|
Always_On, !- Applicability Schedule Name
|
|
HVACOperationSchd, !- Fan Schedule Name
|
|
CycleOnAny, !- Control Type
|
|
1.0, !- Thermostat Tolerance {deltaC}
|
|
FixedRunTime, !- Cycling Run Time Control Type
|
|
1800; !- Cycling Run Time {s}
|
|
|
|
AvailabilityManager:NightCycle,
|
|
PACU_VAV_top Availability Manager, !- Name
|
|
Always_On, !- Applicability Schedule Name
|
|
HVACOperationSchd, !- Fan Schedule Name
|
|
CycleOnAny, !- Control Type
|
|
1.0, !- Thermostat Tolerance {deltaC}
|
|
FixedRunTime, !- Cycling Run Time Control Type
|
|
1800; !- Cycling Run Time {s}
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SET POINT MANAGER:WARMEST ===========
|
|
|
|
SetpointManager:OutdoorAirReset,
|
|
PACU_VAV_bot Supply Air Temperature Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
15.6, !- Setpoint at Outdoor Low Temperature {C}
|
|
10, !- Outdoor Low Temperature {C}
|
|
12.8, !- Setpoint at Outdoor High Temperature {C}
|
|
21.1, !- Outdoor High Temperature {C}
|
|
PACU_VAV_bot Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:OutdoorAirReset,
|
|
PACU_VAV_mid Supply Air Temperature Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
15.6, !- Setpoint at Outdoor Low Temperature {C}
|
|
10, !- Outdoor Low Temperature {C}
|
|
12.8, !- Setpoint at Outdoor High Temperature {C}
|
|
21.1, !- Outdoor High Temperature {C}
|
|
PACU_VAV_mid Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:OutdoorAirReset,
|
|
PACU_VAV_top Supply Air Temperature Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
15.6, !- Setpoint at Outdoor Low Temperature {C}
|
|
10, !- Outdoor Low Temperature {C}
|
|
12.8, !- Setpoint at Outdoor High Temperature {C}
|
|
21.1, !- Outdoor High Temperature {C}
|
|
PACU_VAV_top Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
|
|
SetpointManager:Scheduled,
|
|
SHWSys1 Loop Setpoint Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
SHWSys1-Loop-Temp-Schedule, !- Schedule Name
|
|
SHWSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SET POINT MANAGER:MIXED AIR ===========
|
|
|
|
SetpointManager:MixedAir,
|
|
PACU_VAV_bot_CoolC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
PACU_VAV_bot Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
PACU_VAV_bot_HeatC-PACU_VAV_bot FanNode, !- Fan Inlet Node Name
|
|
PACU_VAV_bot Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
PACU_VAV_bot_CoolC-PACU_VAV_bot_HeatCNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
PACU_VAV_bot_HeatC MixedAir Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
PACU_VAV_bot Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
PACU_VAV_bot_HeatC-PACU_VAV_bot FanNode, !- Fan Inlet Node Name
|
|
PACU_VAV_bot Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
PACU_VAV_bot_HeatC-PACU_VAV_bot FanNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
PACU_VAV_bot_OAMixed Air Temp Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
PACU_VAV_bot Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
PACU_VAV_bot_HeatC-PACU_VAV_bot FanNode, !- Fan Inlet Node Name
|
|
PACU_VAV_bot Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
PACU_VAV_bot_OA-PACU_VAV_bot_CoolCNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
PACU_VAV_mid_CoolC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
PACU_VAV_mid Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
PACU_VAV_mid_HeatC-PACU_VAV_mid FanNode, !- Fan Inlet Node Name
|
|
PACU_VAV_mid Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
PACU_VAV_mid_CoolC-PACU_VAV_mid_HeatCNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
PACU_VAV_mid_HeatC MixedAir Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
PACU_VAV_mid Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
PACU_VAV_mid_HeatC-PACU_VAV_mid FanNode, !- Fan Inlet Node Name
|
|
PACU_VAV_mid Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
PACU_VAV_mid_HeatC-PACU_VAV_mid FanNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
PACU_VAV_mid_OAMixed Air Temp Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
PACU_VAV_mid Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
PACU_VAV_mid_HeatC-PACU_VAV_mid FanNode, !- Fan Inlet Node Name
|
|
PACU_VAV_mid Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
PACU_VAV_mid_OA-PACU_VAV_mid_CoolCNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
PACU_VAV_top_CoolC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
PACU_VAV_top Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
PACU_VAV_top_HeatC-PACU_VAV_top FanNode, !- Fan Inlet Node Name
|
|
PACU_VAV_top Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
PACU_VAV_top_CoolC-PACU_VAV_top_HeatCNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
PACU_VAV_top_HeatC MixedAir Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
PACU_VAV_top Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
PACU_VAV_top_HeatC-PACU_VAV_top FanNode, !- Fan Inlet Node Name
|
|
PACU_VAV_top Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
PACU_VAV_top_HeatC-PACU_VAV_top FanNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
PACU_VAV_top_OAMixed Air Temp Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
PACU_VAV_top Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
PACU_VAV_top_HeatC-PACU_VAV_top FanNode, !- Fan Inlet Node Name
|
|
PACU_VAV_top Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
PACU_VAV_top_OA-PACU_VAV_top_CoolCNode; !- Setpoint Node or NodeList Name
|
|
|
|
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CONTROLLER:OUTSIDE AIR ===========
|
|
Controller:OutdoorAir,
|
|
PACU_VAV_bot_OA_Controller, !- Name
|
|
PACU_VAV_bot_OARelief Node, !- Relief Air Outlet Node Name
|
|
PACU_VAV_bot Supply Equipment Inlet Node, !- Return Air Node Name
|
|
PACU_VAV_bot_OA-PACU_VAV_bot_CoolCNode, !- Mixed Air Node Name
|
|
PACU_VAV_bot_OAInlet Node, !- Actuator Node Name
|
|
0, !- Minimum Outdoor Air Flow Rate {m3/s} !- Minimum Outdoor Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
DifferentialDryBulb, !- Economizer Control Type
|
|
ModulateFlow, !- Economizer Control Action Type
|
|
, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
|
|
, !- Economizer Maximum Limit Enthalpy {J/kg}
|
|
, !- Economizer Maximum Limit Dewpoint Temperature {C}
|
|
, !- Electronic Enthalpy Limit Curve Name
|
|
, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
|
|
LockoutWithHeating, !- Lockout Type
|
|
FixedMinimum, !- Minimum Limit Type
|
|
MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name
|
|
, !- Minimum Fraction of Outdoor Air Schedule Name
|
|
VAV_BOT Max OA Fraction, !- Maximum Fraction of Outdoor Air Schedule Name
|
|
|
|
PACU_VAV_BOT_DCV; !- Mechanical Ventilation Controller Name
|
|
!- Mechanical Ventilation Controller Name!- Mechanical Ventilation Controller Name!- Mechanical Ventilation Controller Name!- Mechanical Ventilation Controller Name
|
|
Controller:OutdoorAir,
|
|
PACU_VAV_mid_OA_Controller, !- Name
|
|
PACU_VAV_mid_OARelief Node, !- Relief Air Outlet Node Name
|
|
PACU_VAV_mid Supply Equipment Inlet Node, !- Return Air Node Name
|
|
PACU_VAV_mid_OA-PACU_VAV_mid_CoolCNode, !- Mixed Air Node Name
|
|
PACU_VAV_mid_OAInlet Node, !- Actuator Node Name
|
|
0, !- Minimum Outdoor Air Flow Rate {m3/s} !- Minimum Outdoor Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
DifferentialDryBulb, !- Economizer Control Type
|
|
ModulateFlow, !- Economizer Control Action Type
|
|
, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
|
|
, !- Economizer Maximum Limit Enthalpy {J/kg}
|
|
, !- Economizer Maximum Limit Dewpoint Temperature {C}
|
|
, !- Electronic Enthalpy Limit Curve Name
|
|
, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
|
|
LockoutWithHeating, !- Lockout Type
|
|
FixedMinimum, !- Minimum Limit Type
|
|
MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name
|
|
, !- Minimum Fraction of Outdoor Air Schedule Name
|
|
VAV_MID Max OA Fraction, !- Maximum Fraction of Outdoor Air Schedule Name
|
|
|
|
PACU_VAV_MID_DCV; !- Mechanical Ventilation Controller Name
|
|
!- Mechanical Ventilation Controller Name!- Mechanical Ventilation Controller Name!- Mechanical Ventilation Controller Name!- Mechanical Ventilation Controller Name
|
|
Controller:OutdoorAir,
|
|
PACU_VAV_top_OA_Controller, !- Name
|
|
PACU_VAV_top_OARelief Node, !- Relief Air Outlet Node Name
|
|
PACU_VAV_top Supply Equipment Inlet Node, !- Return Air Node Name
|
|
PACU_VAV_top_OA-PACU_VAV_top_CoolCNode, !- Mixed Air Node Name
|
|
PACU_VAV_top_OAInlet Node, !- Actuator Node Name
|
|
0, !- Minimum Outdoor Air Flow Rate {m3/s} !- Minimum Outdoor Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
DifferentialDryBulb, !- Economizer Control Type
|
|
ModulateFlow, !- Economizer Control Action Type
|
|
, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
|
|
, !- Economizer Maximum Limit Enthalpy {J/kg}
|
|
, !- Economizer Maximum Limit Dewpoint Temperature {C}
|
|
, !- Electronic Enthalpy Limit Curve Name
|
|
, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
|
|
LockoutWithHeating, !- Lockout Type
|
|
FixedMinimum, !- Minimum Limit Type
|
|
MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name
|
|
, !- Minimum Fraction of Outdoor Air Schedule Name
|
|
VAV_TOP Max OA Fraction, !- Maximum Fraction of Outdoor Air Schedule Name
|
|
|
|
PACU_VAV_TOP_DCV; !- Mechanical Ventilation Controller Name
|
|
!- Mechanical Ventilation Controller Name!- Mechanical Ventilation Controller Name!- Mechanical Ventilation Controller Name!- Mechanical Ventilation Controller Name
|
|
!- =========== ALL OBJECTS IN CLASS: CONTROLLED ZONE EQUIP CONFIGURATION ===========
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Core_bottom, !- Zone Name
|
|
Core_bottom Equipment, !- Zone Conditioning Equipment List Name
|
|
Core_bottom Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Core_bottom Air Node, !- Zone Air Node Name
|
|
Core_bottom Return Air Node; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Core_mid, !- Zone Name
|
|
Core_mid Equipment, !- Zone Conditioning Equipment List Name
|
|
Core_mid Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Core_mid Air Node, !- Zone Air Node Name
|
|
Core_mid Return Air Node;!- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Core_top, !- Zone Name
|
|
Core_top Equipment, !- Zone Conditioning Equipment List Name
|
|
Core_top Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Core_top Air Node, !- Zone Air Node Name
|
|
Core_top Return Air Node;!- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Perimeter_top_ZN_3, !- Zone Name
|
|
Perimeter_top_ZN_3 Equipment, !- Zone Conditioning Equipment List Name
|
|
Perimeter_top_ZN_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Perimeter_top_ZN_3 Air Node, !- Zone Air Node Name
|
|
Perimeter_top_ZN_3 Return Air Node; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Perimeter_top_ZN_2, !- Zone Name
|
|
Perimeter_top_ZN_2 Equipment, !- Zone Conditioning Equipment List Name
|
|
Perimeter_top_ZN_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Perimeter_top_ZN_2 Air Node, !- Zone Air Node Name
|
|
Perimeter_top_ZN_2 Return Air Node; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Perimeter_top_ZN_1, !- Zone Name
|
|
Perimeter_top_ZN_1 Equipment, !- Zone Conditioning Equipment List Name
|
|
Perimeter_top_ZN_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Perimeter_top_ZN_1 Air Node, !- Zone Air Node Name
|
|
Perimeter_top_ZN_1 Return Air Node; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Perimeter_top_ZN_4, !- Zone Name
|
|
Perimeter_top_ZN_4 Equipment, !- Zone Conditioning Equipment List Name
|
|
Perimeter_top_ZN_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Perimeter_top_ZN_4 Air Node, !- Zone Air Node Name
|
|
Perimeter_top_ZN_4 Return Air Node; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Perimeter_bot_ZN_3, !- Zone Name
|
|
Perimeter_bot_ZN_3 Equipment, !- Zone Conditioning Equipment List Name
|
|
Perimeter_bot_ZN_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Perimeter_bot_ZN_3 Air Node, !- Zone Air Node Name
|
|
Perimeter_bot_ZN_3 Return Air Node; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Perimeter_bot_ZN_2, !- Zone Name
|
|
Perimeter_bot_ZN_2 Equipment, !- Zone Conditioning Equipment List Name
|
|
Perimeter_bot_ZN_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Perimeter_bot_ZN_2 Air Node, !- Zone Air Node Name
|
|
Perimeter_bot_ZN_2 Return Air Node; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Perimeter_bot_ZN_1, !- Zone Name
|
|
Perimeter_bot_ZN_1 Equipment, !- Zone Conditioning Equipment List Name
|
|
Perimeter_bot_ZN_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Perimeter_bot_ZN_1 Air Node, !- Zone Air Node Name
|
|
Perimeter_bot_ZN_1 Return Air Node; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Perimeter_bot_ZN_4, !- Zone Name
|
|
Perimeter_bot_ZN_4 Equipment, !- Zone Conditioning Equipment List Name
|
|
Perimeter_bot_ZN_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Perimeter_bot_ZN_4 Air Node, !- Zone Air Node Name
|
|
Perimeter_bot_ZN_4 Return Air Node; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Perimeter_mid_ZN_3, !- Zone Name
|
|
Perimeter_mid_ZN_3 Equipment, !- Zone Conditioning Equipment List Name
|
|
Perimeter_mid_ZN_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Perimeter_mid_ZN_3 Air Node, !- Zone Air Node Name
|
|
Perimeter_mid_ZN_3 Return Air Node; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Perimeter_mid_ZN_2, !- Zone Name
|
|
Perimeter_mid_ZN_2 Equipment, !- Zone Conditioning Equipment List Name
|
|
Perimeter_mid_ZN_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Perimeter_mid_ZN_2 Air Node, !- Zone Air Node Name
|
|
Perimeter_mid_ZN_2 Return Air Node; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Perimeter_mid_ZN_1, !- Zone Name
|
|
Perimeter_mid_ZN_1 Equipment, !- Zone Conditioning Equipment List Name
|
|
Perimeter_mid_ZN_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Perimeter_mid_ZN_1 Air Node, !- Zone Air Node Name
|
|
Perimeter_mid_ZN_1 Return Air Node; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Perimeter_mid_ZN_4, !- Zone Name
|
|
Perimeter_mid_ZN_4 Equipment, !- Zone Conditioning Equipment List Name
|
|
Perimeter_mid_ZN_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Perimeter_mid_ZN_4 Air Node, !- Zone Air Node Name
|
|
Perimeter_mid_ZN_4 Return Air Node; !- Zone Return Air Node or NodeList Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ZONE EQUIPMENT LIST ===========
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Core_bottom Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Core_bottom VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Core_mid Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Core_mid VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Core_top Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Core_top VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Perimeter_top_ZN_3 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Perimeter_top_ZN_3 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Perimeter_top_ZN_2 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Perimeter_top_ZN_2 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Perimeter_top_ZN_1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Perimeter_top_ZN_1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Perimeter_top_ZN_4 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Perimeter_top_ZN_4 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Perimeter_bot_ZN_3 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Perimeter_bot_ZN_3 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Perimeter_bot_ZN_2 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Perimeter_bot_ZN_2 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Perimeter_bot_ZN_1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Perimeter_bot_ZN_1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Perimeter_bot_ZN_4 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Perimeter_bot_ZN_4 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Perimeter_mid_ZN_3 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Perimeter_mid_ZN_3 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Perimeter_mid_ZN_2 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Perimeter_mid_ZN_2 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Perimeter_mid_ZN_1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Perimeter_mid_ZN_1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Perimeter_mid_ZN_4 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Perimeter_mid_ZN_4 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1; !- Zone Equipment 1 Heating or No-Load Sequence
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: AIR DISTRIBUTION UNIT ===========
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Core_bottom VAV Box, !- Name
|
|
Core_bottom VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Core_bottom VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Core_mid VAV Box, !- Name
|
|
Core_mid VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Core_mid VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Core_top VAV Box, !- Name
|
|
Core_top VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Core_top VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Perimeter_top_ZN_3 VAV Box, !- Name
|
|
Perimeter_top_ZN_3 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Perimeter_top_ZN_3 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Perimeter_top_ZN_2 VAV Box, !- Name
|
|
Perimeter_top_ZN_2 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Perimeter_top_ZN_2 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Perimeter_top_ZN_1 VAV Box, !- Name
|
|
Perimeter_top_ZN_1 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Perimeter_top_ZN_1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Perimeter_top_ZN_4 VAV Box, !- Name
|
|
Perimeter_top_ZN_4 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Perimeter_top_ZN_4 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Perimeter_bot_ZN_3 VAV Box, !- Name
|
|
Perimeter_bot_ZN_3 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Perimeter_bot_ZN_3 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Perimeter_bot_ZN_2 VAV Box, !- Name
|
|
Perimeter_bot_ZN_2 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Perimeter_bot_ZN_2 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Perimeter_bot_ZN_1 VAV Box, !- Name
|
|
Perimeter_bot_ZN_1 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Perimeter_bot_ZN_1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Perimeter_bot_ZN_4 VAV Box, !- Name
|
|
Perimeter_bot_ZN_4 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Perimeter_bot_ZN_4 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Perimeter_mid_ZN_3 VAV Box, !- Name
|
|
Perimeter_mid_ZN_3 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Perimeter_mid_ZN_3 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Perimeter_mid_ZN_2 VAV Box, !- Name
|
|
Perimeter_mid_ZN_2 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Perimeter_mid_ZN_2 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Perimeter_mid_ZN_1 VAV Box, !- Name
|
|
Perimeter_mid_ZN_1 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Perimeter_mid_ZN_1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Perimeter_mid_ZN_4 VAV Box, !- Name
|
|
Perimeter_mid_ZN_4 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Perimeter_mid_ZN_4 VAV Box Component; !- Air Terminal Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: DXSYSTEM:AIRLOOP ===========
|
|
|
|
CoilSystem:Cooling:DX,
|
|
PACU_VAV_bot_CoolC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PACU_VAV_bot_OA-PACU_VAV_bot_CoolCNode, !- DX Cooling Coil System Inlet Node Name
|
|
PACU_VAV_bot_CoolC-PACU_VAV_bot_HeatCNode, !- DX Cooling Coil System Outlet Node Name
|
|
PACU_VAV_bot_CoolC-PACU_VAV_bot_HeatCNode, !- DX Cooling Coil System Sensor Node Name
|
|
Coil:Cooling:DX:TwoSpeed,!- Cooling Coil Object Type
|
|
PACU_VAV_bot_CoolC DXCoil; !- Cooling Coil Name
|
|
|
|
CoilSystem:Cooling:DX,
|
|
PACU_VAV_mid_CoolC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PACU_VAV_mid_OA-PACU_VAV_mid_CoolCNode, !- DX Cooling Coil System Inlet Node Name
|
|
PACU_VAV_mid_CoolC-PACU_VAV_mid_HeatCNode, !- DX Cooling Coil System Outlet Node Name
|
|
PACU_VAV_mid_CoolC-PACU_VAV_mid_HeatCNode, !- DX Cooling Coil System Sensor Node Name
|
|
Coil:Cooling:DX:TwoSpeed,!- Cooling Coil Object Type
|
|
PACU_VAV_mid_CoolC DXCoil; !- Cooling Coil Name
|
|
|
|
CoilSystem:Cooling:DX,
|
|
PACU_VAV_top_CoolC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PACU_VAV_top_OA-PACU_VAV_top_CoolCNode, !- DX Cooling Coil System Inlet Node Name
|
|
PACU_VAV_top_CoolC-PACU_VAV_top_HeatCNode, !- DX Cooling Coil System Outlet Node Name
|
|
PACU_VAV_top_CoolC-PACU_VAV_top_HeatCNode, !- DX Cooling Coil System Sensor Node Name
|
|
Coil:Cooling:DX:TwoSpeed,!- Cooling Coil Object Type
|
|
PACU_VAV_top_CoolC DXCoil; !- Cooling Coil Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: SINGLE DUCT:VAV:REHEAT ===========
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Core_bottom VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Core_bottom VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Core_bottom VAV Box Inlet Node, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.172, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Core_bottom VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Core_bottom VAV Box Outlet Node, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
Normal, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Core_mid VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Core_mid VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Core_mid VAV Box Inlet Node, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.299, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Core_mid VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Core_mid VAV Box Outlet Node, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
Normal, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Core_top VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Core_top VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Core_top VAV Box Inlet Node, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.298, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Core_top VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Core_top VAV Box Outlet Node, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
Normal, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Perimeter_top_ZN_3 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Perimeter_top_ZN_3 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Perimeter_top_ZN_3 VAV Box Inlet Node, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.232, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Perimeter_top_ZN_3 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Perimeter_top_ZN_3 VAV Box Outlet Node, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
Normal, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Perimeter_top_ZN_2 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Perimeter_top_ZN_2 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Perimeter_top_ZN_2 VAV Box Inlet Node, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.111, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Perimeter_top_ZN_2 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Perimeter_top_ZN_2 VAV Box Outlet Node, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
Normal, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Perimeter_top_ZN_1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Perimeter_top_ZN_1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Perimeter_top_ZN_1 VAV Box Inlet Node, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.194, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Perimeter_top_ZN_1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Perimeter_top_ZN_1 VAV Box Outlet Node, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
Normal, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Perimeter_top_ZN_4 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Perimeter_top_ZN_4 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Perimeter_top_ZN_4 VAV Box Inlet Node, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.106, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Perimeter_top_ZN_4 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Perimeter_top_ZN_4 VAV Box Outlet Node, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
Normal, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Perimeter_bot_ZN_3 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Perimeter_bot_ZN_3 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Perimeter_bot_ZN_3 VAV Box Inlet Node, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.29, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Perimeter_bot_ZN_3 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Perimeter_bot_ZN_3 VAV Box Outlet Node, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
Normal, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Perimeter_bot_ZN_2 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Perimeter_bot_ZN_2 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Perimeter_bot_ZN_2 VAV Box Inlet Node, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.136, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Perimeter_bot_ZN_2 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Perimeter_bot_ZN_2 VAV Box Outlet Node, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
Normal, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Perimeter_bot_ZN_1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Perimeter_bot_ZN_1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Perimeter_bot_ZN_1 VAV Box Inlet Node, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.248, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Perimeter_bot_ZN_1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Perimeter_bot_ZN_1 VAV Box Outlet Node, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
Normal, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Perimeter_bot_ZN_4 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Perimeter_bot_ZN_4 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Perimeter_bot_ZN_4 VAV Box Inlet Node, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.13, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Perimeter_bot_ZN_4 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Perimeter_bot_ZN_4 VAV Box Outlet Node, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
Normal, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Perimeter_mid_ZN_3 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Perimeter_mid_ZN_3 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Perimeter_mid_ZN_3 VAV Box Inlet Node, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.263, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Perimeter_mid_ZN_3 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Perimeter_mid_ZN_3 VAV Box Outlet Node, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
Normal, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Perimeter_mid_ZN_2 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Perimeter_mid_ZN_2 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Perimeter_mid_ZN_2 VAV Box Inlet Node, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Scheduled, !- Zone Minimum Air Flow Input Method
|
|
, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
PERIMETER_MID_ZN_2_MDP_Sch,!- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Perimeter_mid_ZN_2 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Perimeter_mid_ZN_2 VAV Box Outlet Node, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
Normal, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Perimeter_mid_ZN_1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Perimeter_mid_ZN_1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Perimeter_mid_ZN_1 VAV Box Inlet Node, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.212, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Perimeter_mid_ZN_1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Perimeter_mid_ZN_1 VAV Box Outlet Node, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
Normal, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Perimeter_mid_ZN_4 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Perimeter_mid_ZN_4 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Perimeter_mid_ZN_4 VAV Box Inlet Node, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.112, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Perimeter_mid_ZN_4 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Perimeter_mid_ZN_4 VAV Box Outlet Node, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
Normal, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
0.5, !- Maximum Flow Fraction During Reheat
|
|
40; !- Maximum Reheat Air Temperature {C}
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ZONE CONTROL:THERMOSTATIC ===========
|
|
|
|
ZoneControl:Thermostat,
|
|
Core_bottom Thermostat, !- Name
|
|
Core_bottom, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Core_bottom DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Core_mid Thermostat, !- Name
|
|
Core_mid, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Core_mid DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Core_top Thermostat, !- Name
|
|
Core_top, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Core_top DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Perimeter_top_ZN_3 Thermostat, !- Name
|
|
Perimeter_top_ZN_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Perimeter_top_ZN_2 Thermostat, !- Name
|
|
Perimeter_top_ZN_2, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Perimeter_top_ZN_1 Thermostat, !- Name
|
|
Perimeter_top_ZN_1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Perimeter_top_ZN_4 Thermostat, !- Name
|
|
Perimeter_top_ZN_4, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Perimeter_bot_ZN_3 Thermostat, !- Name
|
|
Perimeter_bot_ZN_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Perimeter_bot_ZN_2 Thermostat, !- Name
|
|
Perimeter_bot_ZN_2, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Perimeter_bot_ZN_1 Thermostat, !- Name
|
|
Perimeter_bot_ZN_1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Perimeter_bot_ZN_4 Thermostat, !- Name
|
|
Perimeter_bot_ZN_4, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Perimeter_mid_ZN_3 Thermostat, !- Name
|
|
Perimeter_mid_ZN_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Perimeter_mid_ZN_2 Thermostat, !- Name
|
|
Perimeter_mid_ZN_2, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Perimeter_mid_ZN_1 Thermostat, !- Name
|
|
Perimeter_mid_ZN_1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Perimeter_mid_ZN_4 Thermostat, !- Name
|
|
Perimeter_mid_ZN_4, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: DUAL SETPOINT WITH DEADBAND ===========
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Core_bottom DualSPSched, !- Name
|
|
HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Core_mid DualSPSched, !- Name
|
|
HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Core_top DualSPSched, !- Name
|
|
HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Perimeter_top_ZN_3 DualSPSched, !- Name
|
|
HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Perimeter_top_ZN_2 DualSPSched, !- Name
|
|
HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Perimeter_top_ZN_1 DualSPSched, !- Name
|
|
HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Perimeter_top_ZN_4 DualSPSched, !- Name
|
|
HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Perimeter_bot_ZN_3 DualSPSched, !- Name
|
|
HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Perimeter_bot_ZN_2 DualSPSched, !- Name
|
|
HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Perimeter_bot_ZN_1 DualSPSched, !- Name
|
|
HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Perimeter_bot_ZN_4 DualSPSched, !- Name
|
|
HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Perimeter_mid_ZN_3 DualSPSched, !- Name
|
|
HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Perimeter_mid_ZN_2 DualSPSched, !- Name
|
|
HTGSETP_SCH_YES_OPTIMUM_w_SB, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH_YES_OPTIMUM_w_SB; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Perimeter_mid_ZN_1 DualSPSched, !- Name
|
|
HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Perimeter_mid_ZN_4 DualSPSched, !- Name
|
|
HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ZONE SUPPLY AIR PATH ===========
|
|
|
|
AirLoopHVAC:SupplyPath,
|
|
PACU_VAV_bot, !- Name
|
|
PACU_VAV_bot Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
|
|
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
|
|
PACU_VAV_bot Supply Air Splitter; !- Component 1 Name
|
|
|
|
AirLoopHVAC:SupplyPath,
|
|
PACU_VAV_mid, !- Name
|
|
PACU_VAV_mid Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
|
|
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
|
|
PACU_VAV_mid Supply Air Splitter; !- Component 1 Name
|
|
|
|
AirLoopHVAC:SupplyPath,
|
|
PACU_VAV_top, !- Name
|
|
PACU_VAV_top Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
|
|
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
|
|
PACU_VAV_top Supply Air Splitter; !- Component 1 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ZONE RETURN AIR PATH ===========
|
|
|
|
AirLoopHVAC:ReturnPath,
|
|
PACU_VAV_bot Return Air Path, !- Name
|
|
PACU_VAV_bot Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
|
|
AirLoopHVAC:ReturnPlenum,!- Component 1 Object Type
|
|
FirstFloor_Return_Plenum,!- Component 1 Name
|
|
AirLoopHVAC:ZoneMixer, !- Component 2 Object Type
|
|
PACU_VAV_bot Return Air Mixer; !- Component 2 Name
|
|
|
|
AirLoopHVAC:ReturnPath,
|
|
PACU_VAV_mid Return Air Path, !- Name
|
|
PACU_VAV_mid Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
|
|
AirLoopHVAC:ReturnPlenum,!- Component 1 Object Type
|
|
MidFloor_Return_Plenum, !- Component 1 Name
|
|
AirLoopHVAC:ZoneMixer, !- Component 2 Object Type
|
|
PACU_VAV_mid Return Air Mixer; !- Component 2 Name
|
|
|
|
AirLoopHVAC:ReturnPath,
|
|
PACU_VAV_top Return Air Path, !- Name
|
|
PACU_VAV_top Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
|
|
AirLoopHVAC:ReturnPlenum,!- Component 1 Object Type
|
|
TopFloor_Return_Plenum, !- Component 1 Name
|
|
AirLoopHVAC:ZoneMixer, !- Component 2 Object Type
|
|
PACU_VAV_top Return Air Mixer; !- Component 2 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ZONE RETURN PLENUM ===========
|
|
|
|
AirLoopHVAC:ReturnPlenum,
|
|
FirstFloor_Return_Plenum,!- Name
|
|
FirstFloor_Plenum, !- Zone Name
|
|
FirstFloor_Plenum Node, !- Zone Node Name
|
|
FirstFloor_Plenum Outlet Node, !- Outlet Node Name
|
|
, !- Induced Air Outlet Node or NodeList Name
|
|
Core_bottom Return Air Node, !- Inlet 1 Node Name
|
|
Perimeter_bot_ZN_4 Return Air Node, !- Inlet 2 Node Name
|
|
Perimeter_bot_ZN_3 Return Air Node, !- Inlet 3 Node Name
|
|
Perimeter_bot_ZN_2 Return Air Node, !- Inlet 4 Node Name
|
|
Perimeter_bot_ZN_1 Return Air Node; !- Inlet 5 Node Name
|
|
|
|
AirLoopHVAC:ReturnPlenum,
|
|
MidFloor_Return_Plenum, !- Name
|
|
MidFloor_Plenum, !- Zone Name
|
|
MidFloor_Plenum Node, !- Zone Node Name
|
|
MidFloor_Plenum Outlet Node, !- Outlet Node Name
|
|
, !- Induced Air Outlet Node or NodeList Name
|
|
Core_mid Return Air Node,!- Inlet 1 Node Name
|
|
Perimeter_mid_ZN_4 Return Air Node, !- Inlet 2 Node Name
|
|
Perimeter_mid_ZN_3 Return Air Node, !- Inlet 3 Node Name
|
|
Perimeter_mid_ZN_2 Return Air Node, !- Inlet 4 Node Name
|
|
Perimeter_mid_ZN_1 Return Air Node; !- Inlet 5 Node Name
|
|
|
|
AirLoopHVAC:ReturnPlenum,
|
|
TopFloor_Return_Plenum, !- Name
|
|
TopFloor_Plenum, !- Zone Name
|
|
TopFloor_Plenum Node, !- Zone Node Name
|
|
TopFloor_Plenum Outlet Node, !- Outlet Node Name
|
|
, !- Induced Air Outlet Node or NodeList Name
|
|
Core_top Return Air Node,!- Inlet 1 Node Name
|
|
Perimeter_top_ZN_4 Return Air Node, !- Inlet 2 Node Name
|
|
Perimeter_top_ZN_3 Return Air Node, !- Inlet 3 Node Name
|
|
Perimeter_top_ZN_2 Return Air Node, !- Inlet 4 Node Name
|
|
Perimeter_top_ZN_1 Return Air Node; !- Inlet 5 Node Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ZONE SPLITTER ===========
|
|
|
|
AirLoopHVAC:ZoneSplitter,
|
|
PACU_VAV_bot Supply Air Splitter, !- Name
|
|
PACU_VAV_bot Zone Equipment Inlet Node, !- Inlet Node Name
|
|
Core_bottom VAV Box Inlet Node, !- Outlet 1 Node Name
|
|
Perimeter_bot_ZN_3 VAV Box Inlet Node, !- Outlet 2 Node Name
|
|
Perimeter_bot_ZN_2 VAV Box Inlet Node, !- Outlet 3 Node Name
|
|
Perimeter_bot_ZN_1 VAV Box Inlet Node, !- Outlet 4 Node Name
|
|
Perimeter_bot_ZN_4 VAV Box Inlet Node; !- Outlet 5 Node Name
|
|
|
|
AirLoopHVAC:ZoneSplitter,
|
|
PACU_VAV_mid Supply Air Splitter, !- Name
|
|
PACU_VAV_mid Zone Equipment Inlet Node, !- Inlet Node Name
|
|
Core_mid VAV Box Inlet Node, !- Outlet 1 Node Name
|
|
Perimeter_mid_ZN_3 VAV Box Inlet Node, !- Outlet 2 Node Name
|
|
Perimeter_mid_ZN_2 VAV Box Inlet Node, !- Outlet 3 Node Name
|
|
Perimeter_mid_ZN_1 VAV Box Inlet Node, !- Outlet 4 Node Name
|
|
Perimeter_mid_ZN_4 VAV Box Inlet Node; !- Outlet 5 Node Name
|
|
|
|
AirLoopHVAC:ZoneSplitter,
|
|
PACU_VAV_top Supply Air Splitter, !- Name
|
|
PACU_VAV_top Zone Equipment Inlet Node, !- Inlet Node Name
|
|
Core_top VAV Box Inlet Node, !- Outlet 1 Node Name
|
|
Perimeter_top_ZN_3 VAV Box Inlet Node, !- Outlet 2 Node Name
|
|
Perimeter_top_ZN_2 VAV Box Inlet Node, !- Outlet 3 Node Name
|
|
Perimeter_top_ZN_1 VAV Box Inlet Node, !- Outlet 4 Node Name
|
|
Perimeter_top_ZN_4 VAV Box Inlet Node; !- Outlet 5 Node Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: ZONE MIXER ===========
|
|
|
|
AirLoopHVAC:ZoneMixer,
|
|
PACU_VAV_bot Return Air Mixer, !- Name
|
|
PACU_VAV_bot Zone Equipment Outlet Node, !- Outlet Node Name
|
|
FirstFloor_Plenum Outlet Node; !- Inlet 1 Node Name
|
|
|
|
AirLoopHVAC:ZoneMixer,
|
|
PACU_VAV_mid Return Air Mixer, !- Name
|
|
PACU_VAV_mid Zone Equipment Outlet Node, !- Outlet Node Name
|
|
MidFloor_Plenum Outlet Node; !- Inlet 1 Node Name
|
|
|
|
AirLoopHVAC:ZoneMixer,
|
|
PACU_VAV_top Return Air Mixer, !- Name
|
|
PACU_VAV_top Zone Equipment Outlet Node, !- Outlet Node Name
|
|
TopFloor_Plenum Outlet Node; !- Inlet 1 Node Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: WATER HEATER:MIXED ===========
|
|
|
|
|
|
WaterHeater:Mixed,
|
|
SHWSys1 Water Heater, !- Name
|
|
0.3785412, !- Tank Volume {m3}
|
|
SHWSys1 Water Heater Setpoint Temperature Schedule, !- Setpoint Temperature Schedule Name
|
|
2.0, !- Deadband Temperature Difference {deltaC}
|
|
82.2222, !- Maximum Temperature Limit {C}
|
|
Cycle, !- Heater Control Type
|
|
29307.11, !- Heater Maximum Capacity {W}
|
|
, !- Heater Minimum Capacity {W}
|
|
, !- Heater Ignition Minimum Flow Rate {m3/s}
|
|
, !- Heater Ignition Delay {s}
|
|
NATURALGAS, !- Heater Fuel Type
|
|
0.808039999, !- Heater Thermal Efficiency
|
|
, !- Part Load Factor Curve Name
|
|
1886.44, !- Off Cycle Parasitic Fuel Consumption Rate {W}
|
|
NATURALGAS, !- Off Cycle Parasitic Fuel Type
|
|
0.8, !- Off Cycle Parasitic Heat Fraction to Tank
|
|
1886.44, !- On Cycle Parasitic Fuel Consumption Rate {W}
|
|
NATURALGAS, !- On Cycle Parasitic Fuel Type
|
|
, !- On Cycle Parasitic Heat Fraction to Tank
|
|
zone, !- Ambient Temperature Indicator
|
|
, !- Ambient Temperature Schedule Name
|
|
CORE_BOTTOM, !- Ambient Temperature Zone Name
|
|
, !- Ambient Temperature Outdoor Air Node Name
|
|
7.561562668, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K}
|
|
, !- Off Cycle Loss Fraction to Zone
|
|
7.561562668, !- On Cycle Loss Coefficient to Ambient Temperature {W/K}
|
|
, !- On Cycle Loss Fraction to Zone
|
|
, !- Peak Use Flow Rate {m3/s}
|
|
, !- Use Flow Rate Fraction Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
SHWSys1 Pump-SHWSys1 Water HeaterNode, !- Use Side Inlet Node Name
|
|
SHWSys1 Supply Equipment Outlet Node, !- Use Side Outlet Node Name
|
|
1.0, !- Use Side Effectiveness
|
|
, !- Source Side Inlet Node Name
|
|
, !- Source Side Outlet Node Name
|
|
1.0, !- Source Side Effectiveness
|
|
AUTOSIZE, !- Use Side Design Flow Rate {m3/s}
|
|
AUTOSIZE, !- Source Side Design Flow Rate {m3/s}
|
|
1.5; !- Indirect Water Heating Recovery Time {hr}
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: PUMP:VARIABLE SPEED ===========
|
|
|
|
|
|
Pump:ConstantSpeed,
|
|
SHWSys1 Pump, !- Name
|
|
SHWSys1 Supply Inlet Node, !- Inlet Node Name
|
|
SHWSys1 Pump-SHWSys1 Water HeaterNodeviaConnector, !- Outlet Node Name
|
|
autosize, !- Design Flow Rate {m3/s}
|
|
29891, !- Design Pump Head {Pa}
|
|
AUTOSIZE, !- Design Power Consumption {W}
|
|
0.30, !- Motor Efficiency
|
|
0.0, !- Fraction of Motor Inefficiencies to Fluid Stream
|
|
Intermittent; !- Pump Control Type
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: COIL:ELECTRIC:HEATING ===========
|
|
|
|
Coil:Heating:Electric,
|
|
Core_bottom VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Core_bottom VAV Box Damper Node, !- Air Inlet Node Name
|
|
Core_bottom VAV Box Outlet Node; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Core_mid VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Core_mid VAV Box Damper Node, !- Air Inlet Node Name
|
|
Core_mid VAV Box Outlet Node; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Core_top VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Core_top VAV Box Damper Node, !- Air Inlet Node Name
|
|
Core_top VAV Box Outlet Node; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Perimeter_top_ZN_3 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Perimeter_top_ZN_3 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Perimeter_top_ZN_3 VAV Box Outlet Node; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Perimeter_top_ZN_2 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Perimeter_top_ZN_2 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Perimeter_top_ZN_2 VAV Box Outlet Node; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Perimeter_top_ZN_1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Perimeter_top_ZN_1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Perimeter_top_ZN_1 VAV Box Outlet Node; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Perimeter_top_ZN_4 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Perimeter_top_ZN_4 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Perimeter_top_ZN_4 VAV Box Outlet Node; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Perimeter_bot_ZN_3 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Perimeter_bot_ZN_3 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Perimeter_bot_ZN_3 VAV Box Outlet Node; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Perimeter_bot_ZN_2 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Perimeter_bot_ZN_2 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Perimeter_bot_ZN_2 VAV Box Outlet Node; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Perimeter_bot_ZN_1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Perimeter_bot_ZN_1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Perimeter_bot_ZN_1 VAV Box Outlet Node; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Perimeter_bot_ZN_4 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Perimeter_bot_ZN_4 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Perimeter_bot_ZN_4 VAV Box Outlet Node; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Perimeter_mid_ZN_3 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Perimeter_mid_ZN_3 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Perimeter_mid_ZN_3 VAV Box Outlet Node; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Perimeter_mid_ZN_2 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Perimeter_mid_ZN_2 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Perimeter_mid_ZN_2 VAV Box Outlet Node; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Perimeter_mid_ZN_1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Perimeter_mid_ZN_1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Perimeter_mid_ZN_1 VAV Box Outlet Node; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Perimeter_mid_ZN_4 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Perimeter_mid_ZN_4 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Perimeter_mid_ZN_4 VAV Box Outlet Node; !- Air Outlet Node Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: COIL:GAS:HEATING ===========
|
|
|
|
Coil:Heating:Fuel,
|
|
PACU_VAV_bot_HeatC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
NaturalGas, !- Fuel Type
|
|
0.81, !- Burner Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
PACU_VAV_bot_CoolC-PACU_VAV_bot_HeatCNode, !- Air Inlet Node Name
|
|
PACU_VAV_bot_HeatC-PACU_VAV_bot FanNode, !- Air Outlet Node Name
|
|
PACU_VAV_bot_HeatC-PACU_VAV_bot FanNode; !- Temperature Setpoint Node Name
|
|
|
|
Coil:Heating:Fuel,
|
|
PACU_VAV_mid_HeatC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
NaturalGas, !- Fuel Type
|
|
0.81, !- Burner Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
PACU_VAV_mid_CoolC-PACU_VAV_mid_HeatCNode, !- Air Inlet Node Name
|
|
PACU_VAV_mid_HeatC-PACU_VAV_mid FanNode, !- Air Outlet Node Name
|
|
PACU_VAV_mid_HeatC-PACU_VAV_mid FanNode; !- Temperature Setpoint Node Name
|
|
|
|
Coil:Heating:Fuel,
|
|
PACU_VAV_top_HeatC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
NaturalGas, !- Fuel Type
|
|
0.81, !- Burner Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
PACU_VAV_top_CoolC-PACU_VAV_top_HeatCNode, !- Air Inlet Node Name
|
|
PACU_VAV_top_HeatC-PACU_VAV_top FanNode, !- Air Outlet Node Name
|
|
PACU_VAV_top_HeatC-PACU_VAV_top FanNode; !- Temperature Setpoint Node Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: COIL:DX:MULTISPEED:COOLINGEMPIRICAL ===========
|
|
|
|
Coil:Cooling:DX:TwoSpeed,
|
|
PACU_VAV_bot_CoolC DXCoil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- High Speed Gross Rated Total Cooling Capacity {W} Sep 25, 2012: DX_TwoSpeedObject_from_VAV
|
|
AUTOSIZE, !- High Speed Gross Rated Sensible Heat Ratio Sep 25, 2012: DX_TwoSpeedObject_from_VAV
|
|
3.39928881549157, !- High Speed Gross Rated Cooling COP {W/W} Sep 25, 2012: DX_TwoSpeedObject_from_VAV
|
|
AUTOSIZE, !- High Speed Rated Air Flow Rate {m3/s} Sep 25, 2012: DX_TwoSpeedObject_from_VAV
|
|
, !- Unit Internal Static Air Pressure {Pa}
|
|
PACU_VAV_bot_OA-PACU_VAV_bot_CoolCNode, !- Air Inlet Node Name
|
|
PACU_VAV_bot_CoolC-PACU_VAV_bot_HeatCNode, !- Air Outlet Node Name
|
|
FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
|
|
FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_FFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
|
|
FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
|
|
FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
|
|
FURNACE_PACU_VAV_CoolCIEA_HVAC_BESTEST_9ton-PLR, !- Part Load Fraction Correlation Curve Name
|
|
AUTOSIZE, !- Low Speed Gross Rated Total Cooling Capacity {W} Sep 25, 2012: DX_TwoSpeedObject_from_VAV
|
|
AUTOSIZE, !- Low Speed Gross Rated Sensible Heat Ratio Sep 25, 2012: DX_TwoSpeedObject_from_VAV
|
|
3.39928881549157, !- Low Speed Gross Rated Cooling COP {W/W} Sep 25, 2012: DX_TwoSpeedObject_from_VAV
|
|
AUTOSIZE, !- Low Speed Rated Air Flow Rate {m3/s} Sep 25, 2012: DX_TwoSpeedObject_from_VAV
|
|
FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_CapFT, !- Low Speed Total Cooling Capacity Function of Temperature Curve Name
|
|
FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_EIRFT, !- Low Speed Energy Input Ratio Function of Temperature Curve Name
|
|
; !- Condenser Air Inlet Node Name
|
|
|
|
Coil:Cooling:DX:TwoSpeed,
|
|
PACU_VAV_mid_CoolC DXCoil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- High Speed Gross Rated Total Cooling Capacity {W} Sep 25, 2012: DX_TwoSpeedObject_from_VAV
|
|
AUTOSIZE, !- High Speed Gross Rated Sensible Heat Ratio Sep 25, 2012: DX_TwoSpeedObject_from_VAV
|
|
3.39928881549157, !- High Speed Gross Rated Cooling COP {W/W} Sep 25, 2012: DX_TwoSpeedObject_from_VAV
|
|
AUTOSIZE, !- High Speed Rated Air Flow Rate {m3/s} Sep 25, 2012: DX_TwoSpeedObject_from_VAV
|
|
, !- Unit Internal Static Air Pressure {Pa}
|
|
PACU_VAV_mid_OA-PACU_VAV_mid_CoolCNode, !- Air Inlet Node Name
|
|
PACU_VAV_mid_CoolC-PACU_VAV_mid_HeatCNode, !- Air Outlet Node Name
|
|
FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
|
|
FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_FFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
|
|
FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
|
|
FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
|
|
FURNACE_PACU_VAV_CoolCIEA_HVAC_BESTEST_9ton-PLR, !- Part Load Fraction Correlation Curve Name
|
|
AUTOSIZE, !- Low Speed Gross Rated Total Cooling Capacity {W} Sep 25, 2012: DX_TwoSpeedObject_from_VAV
|
|
AUTOSIZE, !- Low Speed Gross Rated Sensible Heat Ratio Sep 25, 2012: DX_TwoSpeedObject_from_VAV
|
|
3.39928881549157, !- Low Speed Gross Rated Cooling COP {W/W} Sep 25, 2012: DX_TwoSpeedObject_from_VAV
|
|
AUTOSIZE, !- Low Speed Rated Air Flow Rate {m3/s} Sep 25, 2012: DX_TwoSpeedObject_from_VAV
|
|
FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_CapFT, !- Low Speed Total Cooling Capacity Function of Temperature Curve Name
|
|
FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_EIRFT, !- Low Speed Energy Input Ratio Function of Temperature Curve Name
|
|
; !- Condenser Air Inlet Node Name
|
|
|
|
Coil:Cooling:DX:TwoSpeed,
|
|
PACU_VAV_top_CoolC DXCoil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- High Speed Gross Rated Total Cooling Capacity {W} Sep 25, 2012: DX_TwoSpeedObject_from_VAV
|
|
AUTOSIZE, !- High Speed Gross Rated Sensible Heat Ratio Sep 25, 2012: DX_TwoSpeedObject_from_VAV
|
|
3.39928881549157, !- High Speed Gross Rated Cooling COP {W/W} Sep 25, 2012: DX_TwoSpeedObject_from_VAV
|
|
AUTOSIZE, !- High Speed Rated Air Flow Rate {m3/s} Sep 25, 2012: DX_TwoSpeedObject_from_VAV
|
|
, !- Unit Internal Static Air Pressure {Pa}
|
|
PACU_VAV_top_OA-PACU_VAV_top_CoolCNode, !- Air Inlet Node Name
|
|
PACU_VAV_top_CoolC-PACU_VAV_top_HeatCNode, !- Air Outlet Node Name
|
|
FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
|
|
FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_FFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
|
|
FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
|
|
FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
|
|
FURNACE_PACU_VAV_CoolCIEA_HVAC_BESTEST_9ton-PLR, !- Part Load Fraction Correlation Curve Name
|
|
AUTOSIZE, !- Low Speed Gross Rated Total Cooling Capacity {W} Sep 25, 2012: DX_TwoSpeedObject_from_VAV
|
|
AUTOSIZE, !- Low Speed Gross Rated Sensible Heat Ratio Sep 25, 2012: DX_TwoSpeedObject_from_VAV
|
|
3.39928881549157, !- Low Speed Gross Rated Cooling COP {W/W} Sep 25, 2012: DX_TwoSpeedObject_from_VAV
|
|
AUTOSIZE, !- Low Speed Rated Air Flow Rate {m3/s} Sep 25, 2012: DX_TwoSpeedObject_from_VAV
|
|
FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_CapFT, !- Low Speed Total Cooling Capacity Function of Temperature Curve Name
|
|
FURNACE_PACU_VAV_CoolCCarrier48TM014_12tons_EIRFT, !- Low Speed Energy Input Ratio Function of Temperature Curve Name
|
|
; !- Condenser Air Inlet Node Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: FAN:SIMPLE:VARIABLEVOLUME ===========
|
|
|
|
Fan:VariableVolume,
|
|
PACU_VAV_bot Fan, !- Name
|
|
HVACOperationSchd, !- Availability Schedule Name
|
|
0.6045, !- Fan Total Efficiency
|
|
1314.72, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
Fraction, !- Fan Power Minimum Flow Rate Input Method
|
|
0.25, !- Fan Power Minimum Flow Fraction
|
|
, !- Fan Power Minimum Air Flow Rate {m3/s}
|
|
0.93, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
0.0408, !- Fan Power Coefficient 1
|
|
0.088, !- Fan Power Coefficient 2
|
|
-0.0729, !- Fan Power Coefficient 3
|
|
0.9437, !- Fan Power Coefficient 4
|
|
0, !- Fan Power Coefficient 5
|
|
PACU_VAV_bot_HeatC-PACU_VAV_bot FanNode, !- Air Inlet Node Name
|
|
PACU_VAV_bot Supply Equipment Outlet Node; !- Air Outlet Node Name
|
|
|
|
Fan:VariableVolume,
|
|
PACU_VAV_mid Fan, !- Name
|
|
HVACOperationSchd, !- Availability Schedule Name
|
|
0.6006, !- Fan Total Efficiency
|
|
1389.42, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
Fraction, !- Fan Power Minimum Flow Rate Input Method
|
|
0.25, !- Fan Power Minimum Flow Fraction
|
|
, !- Fan Power Minimum Air Flow Rate {m3/s}
|
|
0.924, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
0.0408, !- Fan Power Coefficient 1
|
|
0.088, !- Fan Power Coefficient 2
|
|
-0.0729, !- Fan Power Coefficient 3
|
|
0.9437, !- Fan Power Coefficient 4
|
|
0, !- Fan Power Coefficient 5
|
|
PACU_VAV_mid_HeatC-PACU_VAV_mid FanNode, !- Air Inlet Node Name
|
|
PACU_VAV_mid Supply Equipment Outlet Node; !- Air Outlet Node Name
|
|
|
|
Fan:VariableVolume,
|
|
PACU_VAV_top Fan, !- Name
|
|
HVACOperationSchd, !- Availability Schedule Name
|
|
0.6006, !- Fan Total Efficiency
|
|
1389.42, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
Fraction, !- Fan Power Minimum Flow Rate Input Method
|
|
0.25, !- Fan Power Minimum Flow Fraction
|
|
, !- Fan Power Minimum Air Flow Rate {m3/s}
|
|
0.924, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
0.0408, !- Fan Power Coefficient 1
|
|
0.088, !- Fan Power Coefficient 2
|
|
-0.0729, !- Fan Power Coefficient 3
|
|
0.9437, !- Fan Power Coefficient 4
|
|
0, !- Fan Power Coefficient 5
|
|
PACU_VAV_top_HeatC-PACU_VAV_top FanNode, !- Air Inlet Node Name
|
|
PACU_VAV_top Supply Equipment Outlet Node; !- Air Outlet Node Name
|
|
|
|
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: WATER USE EQUIPMENT ===========
|
|
|
|
|
|
WaterUse:Equipment,
|
|
Core_bottom sub cat, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
3.57511e-06, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Core_bottom sub cat Temp Sched, !- Target Temperature Schedule Name
|
|
Core_bottom sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Core_bottom, !- Zone Name
|
|
Core_bottom sub cat Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Core_bottom sub cat Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Core_mid sub cat, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
3.57511e-06, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Core_mid sub cat Temp Sched, !- Target Temperature Schedule Name
|
|
Core_mid sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Core_mid, !- Zone Name
|
|
Core_mid sub cat Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Core_mid sub cat Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Core_top sub cat, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
3.57511e-06, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Core_top sub cat Temp Sched, !- Target Temperature Schedule Name
|
|
Core_top sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Core_top, !- Zone Name
|
|
Core_top sub cat Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Core_top sub cat Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Perimeter_top_ZN_3 sub cat, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
3.57511e-06, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Perimeter_top_ZN_3 sub cat Temp Sched, !- Target Temperature Schedule Name
|
|
Perimeter_top_ZN_3 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Perimeter_top_ZN_3, !- Zone Name
|
|
Perimeter_top_ZN_3 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Perimeter_top_ZN_3 sub cat Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Perimeter_top_ZN_2 sub cat, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
3.57511e-06, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Perimeter_top_ZN_2 sub cat Temp Sched, !- Target Temperature Schedule Name
|
|
Perimeter_top_ZN_2 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Perimeter_top_ZN_2, !- Zone Name
|
|
Perimeter_top_ZN_2 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Perimeter_top_ZN_2 sub cat Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Perimeter_top_ZN_1 sub cat, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
3.57511e-06, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Perimeter_top_ZN_1 sub cat Temp Sched, !- Target Temperature Schedule Name
|
|
Perimeter_top_ZN_1 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Perimeter_top_ZN_1, !- Zone Name
|
|
Perimeter_top_ZN_1 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Perimeter_top_ZN_1 sub cat Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Perimeter_top_ZN_4 sub cat, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
3.57511e-06, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Perimeter_top_ZN_4 sub cat Temp Sched, !- Target Temperature Schedule Name
|
|
Perimeter_top_ZN_4 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Perimeter_top_ZN_4, !- Zone Name
|
|
Perimeter_top_ZN_4 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Perimeter_top_ZN_4 sub cat Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Perimeter_bot_ZN_3 sub cat, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
3.57511e-06, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Perimeter_bot_ZN_3 sub cat Temp Sched, !- Target Temperature Schedule Name
|
|
Perimeter_bot_ZN_3 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Perimeter_bot_ZN_3, !- Zone Name
|
|
Perimeter_bot_ZN_3 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Perimeter_bot_ZN_3 sub cat Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Perimeter_bot_ZN_2 sub cat, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
3.57511e-06, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Perimeter_bot_ZN_2 sub cat Temp Sched, !- Target Temperature Schedule Name
|
|
Perimeter_bot_ZN_2 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Perimeter_bot_ZN_2, !- Zone Name
|
|
Perimeter_bot_ZN_2 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Perimeter_bot_ZN_2 sub cat Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Perimeter_bot_ZN_1 sub cat, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
3.57511e-06, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Perimeter_bot_ZN_1 sub cat Temp Sched, !- Target Temperature Schedule Name
|
|
Perimeter_bot_ZN_1 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Perimeter_bot_ZN_1, !- Zone Name
|
|
Perimeter_bot_ZN_1 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Perimeter_bot_ZN_1 sub cat Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Perimeter_bot_ZN_4 sub cat, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
3.57511e-06, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Perimeter_bot_ZN_4 sub cat Temp Sched, !- Target Temperature Schedule Name
|
|
Perimeter_bot_ZN_4 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Perimeter_bot_ZN_4, !- Zone Name
|
|
Perimeter_bot_ZN_4 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Perimeter_bot_ZN_4 sub cat Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Perimeter_mid_ZN_3 sub cat, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
3.57511e-06, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Perimeter_mid_ZN_3 sub cat Temp Sched, !- Target Temperature Schedule Name
|
|
Perimeter_mid_ZN_3 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Perimeter_mid_ZN_3, !- Zone Name
|
|
Perimeter_mid_ZN_3 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Perimeter_mid_ZN_3 sub cat Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Perimeter_mid_ZN_2 sub cat, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
3.57511e-06, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Perimeter_mid_ZN_2 sub cat Temp Sched, !- Target Temperature Schedule Name
|
|
Perimeter_mid_ZN_2 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Perimeter_mid_ZN_2, !- Zone Name
|
|
Perimeter_mid_ZN_2 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Perimeter_mid_ZN_2 sub cat Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Perimeter_mid_ZN_1 sub cat, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
3.57511e-06, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Perimeter_mid_ZN_1 sub cat Temp Sched, !- Target Temperature Schedule Name
|
|
Perimeter_mid_ZN_1 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Perimeter_mid_ZN_1, !- Zone Name
|
|
Perimeter_mid_ZN_1 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Perimeter_mid_ZN_1 sub cat Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Perimeter_mid_ZN_4 sub cat, !- Name
|
|
WaterUse, !- End-Use Subcategory
|
|
3.57511e-06, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Perimeter_mid_ZN_4 sub cat Temp Sched, !- Target Temperature Schedule Name
|
|
Perimeter_mid_ZN_4 sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Perimeter_mid_ZN_4, !- Zone Name
|
|
Perimeter_mid_ZN_4 sub cat Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Perimeter_mid_ZN_4 sub cat Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: WATER USE CONNECTIONS ===========
|
|
|
|
|
|
WaterUse:Connections,
|
|
Core_bottom sub cat, !- Name
|
|
Core_bottom sub cat Water Inlet Node, !- Inlet Node Name
|
|
Core_bottom sub cat Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Core_bottom sub cat; !- Water Use Equipment 1 Name
|
|
|
|
|
|
|
|
WaterUse:Connections,
|
|
Core_mid sub cat, !- Name
|
|
Core_mid sub cat Water Inlet Node, !- Inlet Node Name
|
|
Core_mid sub cat Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Core_mid sub cat; !- Water Use Equipment 1 Name
|
|
|
|
|
|
|
|
WaterUse:Connections,
|
|
Core_top sub cat, !- Name
|
|
Core_top sub cat Water Inlet Node, !- Inlet Node Name
|
|
Core_top sub cat Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Core_top sub cat; !- Water Use Equipment 1 Name
|
|
|
|
|
|
|
|
WaterUse:Connections,
|
|
Perimeter_top_ZN_3 sub cat, !- Name
|
|
Perimeter_top_ZN_3 sub cat Water Inlet Node, !- Inlet Node Name
|
|
Perimeter_top_ZN_3 sub cat Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Perimeter_top_ZN_3 sub cat; !- Water Use Equipment 1 Name
|
|
|
|
|
|
|
|
WaterUse:Connections,
|
|
Perimeter_top_ZN_2 sub cat, !- Name
|
|
Perimeter_top_ZN_2 sub cat Water Inlet Node, !- Inlet Node Name
|
|
Perimeter_top_ZN_2 sub cat Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Perimeter_top_ZN_2 sub cat; !- Water Use Equipment 1 Name
|
|
|
|
|
|
|
|
WaterUse:Connections,
|
|
Perimeter_top_ZN_1 sub cat, !- Name
|
|
Perimeter_top_ZN_1 sub cat Water Inlet Node, !- Inlet Node Name
|
|
Perimeter_top_ZN_1 sub cat Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Perimeter_top_ZN_1 sub cat; !- Water Use Equipment 1 Name
|
|
|
|
|
|
|
|
WaterUse:Connections,
|
|
Perimeter_top_ZN_4 sub cat, !- Name
|
|
Perimeter_top_ZN_4 sub cat Water Inlet Node, !- Inlet Node Name
|
|
Perimeter_top_ZN_4 sub cat Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Perimeter_top_ZN_4 sub cat; !- Water Use Equipment 1 Name
|
|
|
|
|
|
|
|
WaterUse:Connections,
|
|
Perimeter_bot_ZN_3 sub cat, !- Name
|
|
Perimeter_bot_ZN_3 sub cat Water Inlet Node, !- Inlet Node Name
|
|
Perimeter_bot_ZN_3 sub cat Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Perimeter_bot_ZN_3 sub cat; !- Water Use Equipment 1 Name
|
|
|
|
|
|
|
|
WaterUse:Connections,
|
|
Perimeter_bot_ZN_2 sub cat, !- Name
|
|
Perimeter_bot_ZN_2 sub cat Water Inlet Node, !- Inlet Node Name
|
|
Perimeter_bot_ZN_2 sub cat Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Perimeter_bot_ZN_2 sub cat; !- Water Use Equipment 1 Name
|
|
|
|
|
|
|
|
WaterUse:Connections,
|
|
Perimeter_bot_ZN_1 sub cat, !- Name
|
|
Perimeter_bot_ZN_1 sub cat Water Inlet Node, !- Inlet Node Name
|
|
Perimeter_bot_ZN_1 sub cat Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Perimeter_bot_ZN_1 sub cat; !- Water Use Equipment 1 Name
|
|
|
|
|
|
|
|
WaterUse:Connections,
|
|
Perimeter_bot_ZN_4 sub cat, !- Name
|
|
Perimeter_bot_ZN_4 sub cat Water Inlet Node, !- Inlet Node Name
|
|
Perimeter_bot_ZN_4 sub cat Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Perimeter_bot_ZN_4 sub cat; !- Water Use Equipment 1 Name
|
|
|
|
|
|
|
|
WaterUse:Connections,
|
|
Perimeter_mid_ZN_3 sub cat, !- Name
|
|
Perimeter_mid_ZN_3 sub cat Water Inlet Node, !- Inlet Node Name
|
|
Perimeter_mid_ZN_3 sub cat Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Perimeter_mid_ZN_3 sub cat; !- Water Use Equipment 1 Name
|
|
|
|
|
|
|
|
WaterUse:Connections,
|
|
Perimeter_mid_ZN_2 sub cat, !- Name
|
|
Perimeter_mid_ZN_2 sub cat Water Inlet Node, !- Inlet Node Name
|
|
Perimeter_mid_ZN_2 sub cat Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Perimeter_mid_ZN_2 sub cat; !- Water Use Equipment 1 Name
|
|
|
|
|
|
|
|
WaterUse:Connections,
|
|
Perimeter_mid_ZN_1 sub cat, !- Name
|
|
Perimeter_mid_ZN_1 sub cat Water Inlet Node, !- Inlet Node Name
|
|
Perimeter_mid_ZN_1 sub cat Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Perimeter_mid_ZN_1 sub cat; !- Water Use Equipment 1 Name
|
|
|
|
|
|
|
|
WaterUse:Connections,
|
|
Perimeter_mid_ZN_4 sub cat, !- Name
|
|
Perimeter_mid_ZN_4 sub cat Water Inlet Node, !- Inlet Node Name
|
|
Perimeter_mid_ZN_4 sub cat Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Perimeter_mid_ZN_4 sub cat; !- Water Use Equipment 1 Name
|
|
|
|
!No PV for this case
|
|
!- =========== ALL OBJECTS IN CLASS: REPORT METERFILEONLY ===========
|
|
|
|
Output:Meter:MeterFileOnly,Electricity:Facility,Hourly;
|
|
|
|
Output:Meter:MeterFileOnly,ElectricityNet:Facility,Hourly;
|
|
|
|
Output:Meter:MeterFileOnly,Gas:Facility,Hourly;
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: REPORT ===========
|
|
|
|
Output:Surfaces:Drawing,DXF;
|
|
|
|
Output:Surfaces:List,Details;
|
|
|
|
Output:VariableDictionary,IDF;
|
|
|
|
Output:Constructions,Constructions;
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: REPORT:TABLE:STYLE ===========
|
|
|
|
OutputControl:Table:Style,
|
|
CommaAndHTML; !- Column Separator
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTPUTCONTROL:REPORTINGTOLERANCES ===========
|
|
|
|
|
|
|
|
OutputControl:ReportingTolerances,
|
|
0.556, !- Tolerance for Time Heating Setpoint Not Met {deltaC}
|
|
0.556; !- Tolerance for Time Cooling Setpoint Not Met {deltaC}
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: OUTPUT:VARIABLE ===========
|
|
|
|
! Output:Variable,*,Site Outdoor Air Drybulb Temperature,Hourly;
|
|
! Output:Variable,*,Site Outdoor Air Wetbulb Temperature,Hourly;
|
|
! Output:Variable,MinOA_MotorizedDamper_Sched,Schedule Value,Hourly;
|
|
!
|
|
! ! Outdoor Air Flow
|
|
!
|
|
! Output:Variable,PACU_VAV_bot_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
! Output:Variable,PACU_VAV_mid_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
! Output:Variable,PACU_VAV_top_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
! Output:Variable,PACU_VAV_bot Heat Recovery Outlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
! Output:Variable,PACU_VAV_mid Heat Recovery Outlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
! Output:Variable,PACU_VAV_top Heat Recovery Outlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
!
|
|
! ! Return Air Flow
|
|
!
|
|
! Output:Variable,PACU_VAV_bot Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
! Output:Variable,PACU_VAV_mid Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
! Output:Variable,PACU_VAV_top Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
! Output:Variable,PACU_VAV_bot Supply Equipment Inlet Node,System Node Temperature,Hourly;
|
|
! Output:Variable,PACU_VAV_mid Supply Equipment Inlet Node,System Node Temperature,Hourly;
|
|
! Output:Variable,PACU_VAV_top Supply Equipment Inlet Node,System Node Temperature,Hourly;
|
|
! Output:Variable,PACU_VAV_bot Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly;
|
|
! Output:Variable,PACU_VAV_mid Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly;
|
|
! Output:Variable,PACU_VAV_top Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly;
|
|
!
|
|
! ! Supply Air Flow
|
|
!
|
|
! Output:Variable,PACU_VAV_bot Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
! Output:Variable,PACU_VAV_mid Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
! Output:Variable,PACU_VAV_top Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly;
|
|
! Output:Variable,PACU_VAV_bot Supply Equipment Outlet Node,System Node Temperature,Hourly;
|
|
! Output:Variable,PACU_VAV_mid Supply Equipment Outlet Node,System Node Temperature,Hourly;
|
|
! Output:Variable,PACU_VAV_top Supply Equipment Outlet Node,System Node Temperature,Hourly;
|
|
! Output:Variable,PACU_VAV_bot Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly;
|
|
! Output:Variable,PACU_VAV_mid Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly;
|
|
! Output:Variable,PACU_VAV_top Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly;
|
|
!
|
|
! ! Coil Load
|
|
!
|
|
! Output:Variable,*,Air System Cooling Coil Total Cooling Energy,Hourly;
|
|
! Output:Variable,*,Air System Heating Coil Total Heating Energy,Hourly;
|
|
!
|
|
! ! SHW
|
|
!
|
|
! Output:Variable,*,Water Heater Heating Rate,Hourly;
|
|
!
|
|
! ! Fan and Pump
|
|
!
|
|
! Output:Variable,*,Fan Electric Power,hourly; !- HVAC Average W
|
|
! Output:Variable,*,Pump Electric Power,hourly; !- HVAC Average W
|
|
! Output:Variable,*,Humidifier Electric Power,hourly; !- HVAC Average W
|
|
!
|
|
! ! Utility and Submeter
|
|
!
|
|
! Output:Meter,Electricity:Facility,Hourly;
|
|
! Output:Meter,Gas:Facility,Hourly;
|
|
! Output:Meter,InteriorLights:Electricity,Hourly;
|
|
! Output:Meter,ExteriorLights:Electricity,Hourly;
|
|
! Output:Meter,InteriorEquipment:Electricity,Hourly;
|
|
! Output:Meter,ExteriorEquipment:Electricity,Hourly;
|
|
! Output:Meter,Fans:Electricity,Hourly;
|
|
! Output:Meter,Pumps:Electricity,Hourly;
|
|
! Output:Meter,Heating:Electricity,Hourly;
|
|
! Output:Meter,Cooling:Electricity,Hourly;
|
|
! Output:Meter,HeatRejection:Electricity,Hourly;
|
|
! Output:Meter,Humidifier:Electricity,Hourly;
|
|
! Output:Meter,HeatRecovery:Electricity,Hourly;
|
|
! Output:Meter,DHW:Electricity,Hourly;
|
|
! Output:Meter,Cogeneration:Electricity,Hourly;
|
|
! Output:Meter,Refrigeration:Electricity,Hourly;
|
|
! Output:Meter,WaterSystems:Electricity,Hourly;
|
|
!
|
|
! Output:Meter,InteriorLights:Gas,Hourly;
|
|
! Output:Meter,ExteriorLights:Gas,Hourly;
|
|
! Output:Meter,InteriorEquipment:Gas,Hourly;
|
|
! Output:Meter,ExteriorEquipment:Gas,Hourly;
|
|
! Output:Meter,Fans:Gas,Hourly;
|
|
! Output:Meter,Pumps:Gas,Hourly;
|
|
! Output:Meter,Heating:Gas,Hourly;
|
|
! Output:Meter,Cooling:Gas,Hourly;
|
|
! Output:Meter,HeatRejection:Gas,Hourly;
|
|
! Output:Meter,Humidifier:Gas,Hourly;
|
|
! Output:Meter,HeatRecovery:Gas,Hourly;
|
|
! Output:Meter,DHW:Gas,Hourly;
|
|
! Output:Meter,Cogeneration:Gas,Hourly;
|
|
! Output:Meter,Refrigeration:Gas,Hourly;
|
|
! Output:Meter,WaterSystems:Gas,Hourly;
|
|
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: REPORT:TABLE:PREDEFINED ===========
|
|
|
|
Output:Table:SummaryReports,
|
|
AllSummaryAndMonthly, !- Report 1 Name
|
|
Standard62.1Summary; !- Report 2 Name
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: REPORT:TABLE:MONTHLY ===========
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary TaskPurpose ProgressIndicator, !- Name ProgressIndicator,ForDetermination2019, ...
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary CodeName ASHRAE901, !- Name ASHRAE901, ASHRAE1891, IECC, Title24, ORSC, IGCC, ...
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary CodeYear 2019, !- Name all years for ASHRAE90.1, IECC, ASHRAE189.1
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary CodeAmendment NoneAmend, !- Name StateAmend,EEM, NoneAmend for national or state without amendment
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary PrototypeName OfficeMedium, !- Name 16 Prototypes
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary TaskScope National, !- Name National, State, City
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary State National, !- Name National for national analysis, NewYork, Utah,... for state analysis, or city name for city analysis. Spell out the name of the state without space between words
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary ClimateZone 6A, !- Name 0-8
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
NameHolderMonthlySummary RepresentCity USA_MN_Rochester, !- Name representative city like Honolulu for national, for each state, for city analysis. this is not the city of the weather file. The weather city will be extracted from epw file
|
|
3, !- Digits After Decimal
|
|
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating:Gas, !- Variable or Meter 2 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 2
|
|
|
|
!- =========== ALL OBJECTS IN CLASS: CONTROLLER:MECHANICALVENTILATION ===========
|
|
|
|
Controller:MechanicalVentilation,
|
|
PACU_VAV_BOT_DCV, !- Name
|
|
MinOA_MotorizedDamper_Sched,!- Availability Schedule Name
|
|
Yes, !- Demand Controlled Ventilation
|
|
VentilationRateProcedure,!- System Outdoor Air Method
|
|
, !- Zone Maximum Outdoor Air Fraction {dimensionless}
|
|
Core_bottom, !- Zone 1 Name
|
|
CM DSOA Core_bottom, !- Design Specification Outdoor Air Object Name 1
|
|
CM DSZAD Core_bottom, !- Design Specification Zone Air Distribution Object Name 1
|
|
Perimeter_bot_ZN_1, !- Zone 2 Name
|
|
CM DSOA Perimeter_bot_ZN_1, !- Design Specification Outdoor Air Object Name 2
|
|
CM DSZAD Perimeter_bot_ZN_1, !- Design Specification Zone Air Distribution Object Name 2
|
|
Perimeter_bot_ZN_2, !- Zone 3 Name
|
|
CM DSOA Perimeter_bot_ZN_2, !- Design Specification Outdoor Air Object Name 3
|
|
CM DSZAD Perimeter_bot_ZN_2, !- Design Specification Zone Air Distribution Object Name 3
|
|
Perimeter_bot_ZN_3, !- Zone 4 Name
|
|
CM DSOA Perimeter_bot_ZN_3, !- Design Specification Outdoor Air Object Name 4
|
|
CM DSZAD Perimeter_bot_ZN_3, !- Design Specification Zone Air Distribution Object Name 4
|
|
Perimeter_bot_ZN_4, !- Zone 5 Name
|
|
CM DSOA Perimeter_bot_ZN_4, !- Design Specification Outdoor Air Object Name 5
|
|
CM DSZAD Perimeter_bot_ZN_4; !- Design Specification Zone Air Distribution Object Name 5
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Core_bottom, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Perimeter_bot_ZN_1, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Perimeter_bot_ZN_2, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Perimeter_bot_ZN_3, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Perimeter_bot_ZN_4, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Core_bottom, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0.00000001, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Perimeter_bot_ZN_1, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0.00000001, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Perimeter_bot_ZN_2, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0.00000001, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Perimeter_bot_ZN_3, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0.00000001, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Perimeter_bot_ZN_4, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0.00000001, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
Controller:MechanicalVentilation,
|
|
PACU_VAV_TOP_DCV, !- Name
|
|
MinOA_MotorizedDamper_Sched,!- Availability Schedule Name
|
|
Yes, !- Demand Controlled Ventilation
|
|
VentilationRateProcedure,!- System Outdoor Air Method
|
|
, !- Zone Maximum Outdoor Air Fraction {dimensionless}
|
|
Core_top, !- Zone 1 Name
|
|
CM DSOA Core_top, !- Design Specification Outdoor Air Object Name 1
|
|
CM DSZAD Core_top, !- Design Specification Zone Air Distribution Object Name 1
|
|
Perimeter_top_ZN_1, !- Zone 2 Name
|
|
CM DSOA Perimeter_top_ZN_1, !- Design Specification Outdoor Air Object Name 2
|
|
CM DSZAD Perimeter_top_ZN_1, !- Design Specification Zone Air Distribution Object Name 2
|
|
Perimeter_top_ZN_2, !- Zone 3 Name
|
|
CM DSOA Perimeter_top_ZN_2, !- Design Specification Outdoor Air Object Name 3
|
|
CM DSZAD Perimeter_top_ZN_2, !- Design Specification Zone Air Distribution Object Name 3
|
|
Perimeter_top_ZN_3, !- Zone 4 Name
|
|
CM DSOA Perimeter_top_ZN_3, !- Design Specification Outdoor Air Object Name 4
|
|
CM DSZAD Perimeter_top_ZN_3, !- Design Specification Zone Air Distribution Object Name 4
|
|
Perimeter_top_ZN_4, !- Zone 5 Name
|
|
CM DSOA Perimeter_top_ZN_4, !- Design Specification Outdoor Air Object Name 5
|
|
CM DSZAD Perimeter_top_ZN_4; !- Design Specification Zone Air Distribution Object Name 5
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Core_top, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Perimeter_top_ZN_1, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Perimeter_top_ZN_2, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Perimeter_top_ZN_3, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Perimeter_top_ZN_4, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Core_top, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0.00000001, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Perimeter_top_ZN_1, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0.00000001, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Perimeter_top_ZN_2, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0.00000001, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Perimeter_top_ZN_3, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0.00000001, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Perimeter_top_ZN_4, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0.00000001, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
Controller:MechanicalVentilation,
|
|
PACU_VAV_MID_DCV, !- Name
|
|
MinOA_MotorizedDamper_Sched,!- Availability Schedule Name
|
|
Yes, !- Demand Controlled Ventilation
|
|
VentilationRateProcedure,!- System Outdoor Air Method
|
|
, !- Zone Maximum Outdoor Air Fraction {dimensionless}
|
|
Core_mid, !- Zone 1 Name
|
|
CM DSOA Core_mid, !- Design Specification Outdoor Air Object Name 1
|
|
CM DSZAD Core_mid, !- Design Specification Zone Air Distribution Object Name 1
|
|
Perimeter_mid_ZN_1, !- Zone 2 Name
|
|
CM DSOA Perimeter_mid_ZN_1, !- Design Specification Outdoor Air Object Name 2
|
|
CM DSZAD Perimeter_mid_ZN_1, !- Design Specification Zone Air Distribution Object Name 2
|
|
Perimeter_mid_ZN_2, !- Zone 3 Name
|
|
CM DSOA Perimeter_mid_ZN_2, !- Design Specification Outdoor Air Object Name 3
|
|
CM DSZAD Perimeter_mid_ZN_2, !- Design Specification Zone Air Distribution Object Name 3
|
|
Perimeter_mid_ZN_3, !- Zone 4 Name
|
|
CM DSOA Perimeter_mid_ZN_3, !- Design Specification Outdoor Air Object Name 4
|
|
CM DSZAD Perimeter_mid_ZN_3, !- Design Specification Zone Air Distribution Object Name 4
|
|
Perimeter_mid_ZN_4, !- Zone 5 Name
|
|
CM DSOA Perimeter_mid_ZN_4, !- Design Specification Outdoor Air Object Name 5
|
|
CM DSZAD Perimeter_mid_ZN_4; !- Design Specification Zone Air Distribution Object Name 5
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Core_mid, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Perimeter_mid_ZN_1, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Perimeter_mid_ZN_2, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Perimeter_mid_ZN_3, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:ZoneAirDistribution,
|
|
CM DSZAD Perimeter_mid_ZN_4, !- Name
|
|
1, !- Zone Air Distribution Effectiveness in Cooling Mode {dimensionless}
|
|
1, !- Zone Air Distribution Effectiveness in Heating Mode {dimensionless}
|
|
; !- Zone Air Distribution Effectiveness Schedule Name
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Core_mid, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0.00000001, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Perimeter_mid_ZN_1, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0.00000001, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Perimeter_mid_ZN_2, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0.00000001, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.0, !- Outdoor Air Flow per Zone {m3/s}
|
|
, !- Outdoor Air Flow Air Changes per Hour
|
|
PERIMETER_MID_ZN_2_OA_Mult; !- Outdoor Air Schedule Name
|
|
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Perimeter_mid_ZN_3, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0.00000001, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
CM DSOA Perimeter_mid_ZN_4, !- Name
|
|
Sum, !- Outdoor Air Method
|
|
0.00000001, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Facility_Int_LTG, !- Name
|
|
, !- Output:Variable or Output:Meter Index Key Name
|
|
InteriorLights:Electricity; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:GlobalVariable,
|
|
Wired_LTG; !- Erl Variable 1 Name
|
|
|
|
EnergyManagementSystem:Program,
|
|
Transformer_Load_Prog, !- Name
|
|
SET Wired_LTG = Facility_Int_LTG*0.0281; !- Program Line 1
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
Transformer_Load_Prog_Manager, !- Name
|
|
AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point
|
|
Transformer_Load_Prog; !- Program Name 1
|
|
|
|
EnergyManagementSystem:OutputVariable,
|
|
Wired_LTG, !- Name
|
|
Wired_LTG, !- EMS Variable Name
|
|
Summed, !- Type of Data in Variable
|
|
ZoneTimeStep, !- Update Frequency
|
|
, !- EMS Program or Subroutine Name
|
|
J; !- Units
|
|
|
|
Meter:Custom,
|
|
Wired_LTG_Electricity, !- Name
|
|
Electricity, !- Fuel Type
|
|
, !- Key Name 1
|
|
Wired_LTG; !- Output Variable or Meter Name 1
|
|
|
|
Meter:CustomDecrement,
|
|
Wired_Int_EQUIP, !- Name
|
|
Electricity, !- Fuel Type
|
|
InteriorEquipment:Electricity, !- Source Meter Name
|
|
Core_bottom_Elevators_Equip, !- Key Name 1
|
|
Electric Equipment Electric Energy; !- Output Variable or Meter Name 1
|
|
|
|
ElectricLoadCenter:Transformer,
|
|
Transformer 1, !- Name
|
|
Always_On, !- Availability Schedule Name
|
|
PowerInFromGrid, !- Transformer Usage
|
|
, !- Zone Name
|
|
, !- Radiative Fraction
|
|
45000, !- Rated Capacity {VA}
|
|
3, !- Phase
|
|
Aluminum, !- Conductor Material
|
|
150, !- Full Load Temperature Rise {C}
|
|
0.1, !- Fraction of Eddy Current Losses
|
|
NominalEfficiency, !- Performance Input Method
|
|
, !- Rated No Load Loss {W}
|
|
, !- Rated Load Loss {W}
|
|
0.984, !- Nameplate Efficiency
|
|
0.35, !- Per Unit Load for Nameplate Efficiency
|
|
75, !- Reference Temperature for Nameplate Efficiency {C}
|
|
, !- Per Unit Load for Maximum Efficiency
|
|
Yes, !- Consider Transformer Loss for Utility Cost
|
|
Wired_LTG_Electricity, !- Meter 1 Name
|
|
Wired_INT_EQUIP; !- Meter 2 Name
|
|
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
OAT, !- Name
|
|
Environment, !- Output:Variable or Output:Meter Index Key Name
|
|
Site Outdoor Air Drybulb Temperature; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
CLGSETP_SCH_Actuator, !- Name
|
|
CLGSETP_SCH_Yes_Optimum, !- Actuated Component Unique Name
|
|
Schedule:Compact, !- Actuated Component Type
|
|
Schedule Value; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
CLGSETP_SCH_w_SB_Actuator, !- Name
|
|
CLGSETP_SCH_Yes_Optimum_w_SB, !- Actuated Component Unique Name
|
|
Schedule:Compact, !- Actuated Component Type
|
|
Schedule Value; !- Actuated Component Control Type
|
|
EnergyManagementSystem:Actuator,
|
|
HTGSETP_SCH_Actuator, !- Name
|
|
HTGSETP_SCH_Yes_Optimum, !- Actuated Component Unique Name
|
|
Schedule:Compact, !- Actuated Component Type
|
|
Schedule Value; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
HTGSETP_SCH_w_SB_Actuator, !- Name
|
|
HTGSETP_SCH_Yes_Optimum_w_SB, !- Actuated Component Unique Name
|
|
Schedule:Compact, !- Actuated Component Type
|
|
Schedule Value; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
OA_BASED_OPTIMUM_START_EMS_Program Manager, !- Name
|
|
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
|
|
OA_BASED_OPTIMUM_START_EMS_Program; !- Program Name 1
|
|
|
|
|
|
EnergyManagementSystem:Program,
|
|
OA_BASED_OPTIMUM_START_EMS_Program, !- Name
|
|
IF DaylightSavings==0 && DayOfWeek>1 && Hour==5 && OAT<23.9 && OAT>1.7, !- Program Line 1
|
|
SET CLGSETP_SCH_Actuator = 26.7, !- Program Line 2
|
|
SET HTGSETP_SCH_Actuator = 15.6, !- <none>
|
|
SET CLGSETP_SCH_w_SB_Actuator = 26.7, !- <none>
|
|
SET HTGSETP_SCH_w_SB_Actuator = 15.6, !- <none>
|
|
ELSEIF DaylightSavings==1 && DayOfWeek>1 && Hour==4 && OAT<23.9 && OAT>1.7, !- <none>
|
|
SET CLGSETP_SCH_Actuator = 26.7, !- <none>
|
|
SET HTGSETP_SCH_Actuator = 15.6, !- <none>
|
|
SET CLGSETP_SCH_w_SB_Actuator = 26.7, !- <none>
|
|
SET HTGSETP_SCH_w_SB_Actuator = 15.6, !- <none>
|
|
ELSE, !- <none>
|
|
SET CLGSETP_SCH_Actuator = NULL, !- <none>
|
|
SET HTGSETP_SCH_Actuator = NULL, !- <none>
|
|
SET CLGSETP_SCH_w_SB_Actuator = NULL, !- <none>
|
|
SET HTGSETP_SCH_w_SB_Actuator = NULL, !- <none>
|
|
ENDIF; !- <none>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Core_bottom_LSr, !- Name
|
|
Core_bottom, !- Output:Variable or Output:Meter Index Key Name
|
|
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Core_bottom_Occ_Sensor, !- Name
|
|
Core_bottom, !- Output:Variable or Output:Meter Index Key Name
|
|
People Occupant Count; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:InternalVariable,
|
|
Core_bottom_Area, !- Name
|
|
Core_bottom, !- Internal Data Index Key Name
|
|
Zone Floor Area; !- Internal Data Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
Core_bottom_Light_Actuator, !- Name
|
|
Core_bottom_lights, !- Actuated Component Unique Name
|
|
Lights, !- Actuated Component Type
|
|
Electric Power Level; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Program,
|
|
SET_Core_bottom_Light_EMS_Program, !- Name
|
|
SET Core_bottom_LSr_IP =0.093*Core_bottom_LSr/Core_bottom_Area, ! Calculate the actual LPD for each hour
|
|
IF (Core_bottom_Occ_Sensor <= 0) && (Core_bottom_LSr_IP >= 0.02),
|
|
SET Core_bottom_Light_Actuator = 0.02*Core_bottom_Area/0.09290304,
|
|
ELSE,
|
|
SET Core_bottom_Light_Actuator = NULL,
|
|
ENDIF;
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
SET_Core_bottom_Light_EMS_Program_Prog_Manager, !- Name
|
|
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
|
|
SET_Core_bottom_Light_EMS_Program; !- Program Name 1
|
|
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Core_mid_LSr, !- Name
|
|
Core_mid, !- Output:Variable or Output:Meter Index Key Name
|
|
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Core_mid_Occ_Sensor, !- Name
|
|
Core_mid, !- Output:Variable or Output:Meter Index Key Name
|
|
People Occupant Count; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:InternalVariable,
|
|
Core_mid_Area, !- Name
|
|
Core_mid, !- Internal Data Index Key Name
|
|
Zone Floor Area; !- Internal Data Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
Core_mid_Light_Actuator, !- Name
|
|
Core_mid_lights, !- Actuated Component Unique Name
|
|
Lights, !- Actuated Component Type
|
|
Electric Power Level; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Program,
|
|
SET_Core_mid_Light_EMS_Program, !- Name
|
|
SET Core_mid_LSr_IP =0.093*Core_mid_LSr/Core_mid_Area, ! Calculate the actual LPD for each hour
|
|
IF (Core_mid_Occ_Sensor <= 0) && (Core_mid_LSr_IP >= 0.02),
|
|
SET Core_mid_Light_Actuator = 0.02*Core_mid_Area/0.09290304,
|
|
ELSE,
|
|
SET Core_mid_Light_Actuator = NULL,
|
|
ENDIF;
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
SET_Core_mid_Light_EMS_Program_Prog_Manager, !- Name
|
|
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
|
|
SET_Core_mid_Light_EMS_Program; !- Program Name 1
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Core_top_LSr, !- Name
|
|
Core_top, !- Output:Variable or Output:Meter Index Key Name
|
|
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Core_top_Occ_Sensor, !- Name
|
|
Core_top, !- Output:Variable or Output:Meter Index Key Name
|
|
People Occupant Count; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:InternalVariable,
|
|
Core_top_Area, !- Name
|
|
Core_top, !- Internal Data Index Key Name
|
|
Zone Floor Area; !- Internal Data Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
Core_top_Light_Actuator, !- Name
|
|
Core_top_lights, !- Actuated Component Unique Name
|
|
Lights, !- Actuated Component Type
|
|
Electric Power Level; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Program,
|
|
SET_Core_top_Light_EMS_Program, !- Name
|
|
SET Core_top_LSr_IP =0.093*Core_top_LSr/Core_top_Area, ! Calculate the actual LPD for each hour
|
|
IF (Core_top_Occ_Sensor <= 0) && (Core_top_LSr_IP >= 0.02),
|
|
SET Core_top_Light_Actuator = 0.02*Core_top_Area/0.09290304,
|
|
ELSE,
|
|
SET Core_top_Light_Actuator = NULL,
|
|
ENDIF;
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
SET_Core_top_Light_EMS_Program_Prog_Manager, !- Name
|
|
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
|
|
SET_Core_top_Light_EMS_Program; !- Program Name 1
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Perimeter_top_ZN_3_LSr, !- Name
|
|
Perimeter_top_ZN_3, !- Output:Variable or Output:Meter Index Key Name
|
|
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Perimeter_top_ZN_3_Occ_Sensor, !- Name
|
|
Perimeter_top_ZN_3, !- Output:Variable or Output:Meter Index Key Name
|
|
People Occupant Count; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:InternalVariable,
|
|
Perimeter_top_ZN_3_Area, !- Name
|
|
Perimeter_top_ZN_3, !- Internal Data Index Key Name
|
|
Zone Floor Area; !- Internal Data Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
Perimeter_top_ZN_3_Light_Actuator, !- Name
|
|
Perimeter_top_ZN_3_lights, !- Actuated Component Unique Name
|
|
Lights, !- Actuated Component Type
|
|
Electric Power Level; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Program,
|
|
SET_Perimeter_top_ZN_3_Light_EMS_Program, !- Name
|
|
SET Perimeter_top_ZN_3_LSr_IP =0.093*Perimeter_top_ZN_3_LSr/Perimeter_top_ZN_3_Area, ! Calculate the actual LPD for each hour
|
|
IF (Perimeter_top_ZN_3_Occ_Sensor <= 0) && (Perimeter_top_ZN_3_LSr_IP >= 0.02),
|
|
SET Perimeter_top_ZN_3_Light_Actuator = 0.02*Perimeter_top_ZN_3_Area/0.09290304,
|
|
ELSE,
|
|
SET Perimeter_top_ZN_3_Light_Actuator = NULL,
|
|
ENDIF;
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
SET_Perimeter_top_ZN_3_Light_EMS_Program_Prog_Manager, !- Name
|
|
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
|
|
SET_Perimeter_top_ZN_3_Light_EMS_Program; !- Program Name 1
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Perimeter_top_ZN_2_LSr, !- Name
|
|
Perimeter_top_ZN_2, !- Output:Variable or Output:Meter Index Key Name
|
|
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Perimeter_top_ZN_2_Occ_Sensor, !- Name
|
|
Perimeter_top_ZN_2, !- Output:Variable or Output:Meter Index Key Name
|
|
People Occupant Count; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:InternalVariable,
|
|
Perimeter_top_ZN_2_Area, !- Name
|
|
Perimeter_top_ZN_2, !- Internal Data Index Key Name
|
|
Zone Floor Area; !- Internal Data Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
Perimeter_top_ZN_2_Light_Actuator, !- Name
|
|
Perimeter_top_ZN_2_lights, !- Actuated Component Unique Name
|
|
Lights, !- Actuated Component Type
|
|
Electric Power Level; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Program,
|
|
SET_Perimeter_top_ZN_2_Light_EMS_Program, !- Name
|
|
SET Perimeter_top_ZN_2_LSr_IP =0.093*Perimeter_top_ZN_2_LSr/Perimeter_top_ZN_2_Area, ! Calculate the actual LPD for each hour
|
|
IF (Perimeter_top_ZN_2_Occ_Sensor <= 0) && (Perimeter_top_ZN_2_LSr_IP >= 0.02),
|
|
SET Perimeter_top_ZN_2_Light_Actuator = 0.02*Perimeter_top_ZN_2_Area/0.09290304,
|
|
ELSE,
|
|
SET Perimeter_top_ZN_2_Light_Actuator = NULL,
|
|
ENDIF;
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
SET_Perimeter_top_ZN_2_Light_EMS_Program_Prog_Manager, !- Name
|
|
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
|
|
SET_Perimeter_top_ZN_2_Light_EMS_Program; !- Program Name 1
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Perimeter_top_ZN_1_LSr, !- Name
|
|
Perimeter_top_ZN_1, !- Output:Variable or Output:Meter Index Key Name
|
|
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Perimeter_top_ZN_1_Occ_Sensor, !- Name
|
|
Perimeter_top_ZN_1, !- Output:Variable or Output:Meter Index Key Name
|
|
People Occupant Count; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:InternalVariable,
|
|
Perimeter_top_ZN_1_Area, !- Name
|
|
Perimeter_top_ZN_1, !- Internal Data Index Key Name
|
|
Zone Floor Area; !- Internal Data Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
Perimeter_top_ZN_1_Light_Actuator, !- Name
|
|
Perimeter_top_ZN_1_lights, !- Actuated Component Unique Name
|
|
Lights, !- Actuated Component Type
|
|
Electric Power Level; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Program,
|
|
SET_Perimeter_top_ZN_1_Light_EMS_Program, !- Name
|
|
SET Perimeter_top_ZN_1_LSr_IP =0.093*Perimeter_top_ZN_1_LSr/Perimeter_top_ZN_1_Area, ! Calculate the actual LPD for each hour
|
|
IF (Perimeter_top_ZN_1_Occ_Sensor <= 0) && (Perimeter_top_ZN_1_LSr_IP >= 0.02),
|
|
SET Perimeter_top_ZN_1_Light_Actuator = 0.02*Perimeter_top_ZN_1_Area/0.09290304,
|
|
ELSE,
|
|
SET Perimeter_top_ZN_1_Light_Actuator = NULL,
|
|
ENDIF;
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
SET_Perimeter_top_ZN_1_Light_EMS_Program_Prog_Manager, !- Name
|
|
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
|
|
SET_Perimeter_top_ZN_1_Light_EMS_Program; !- Program Name 1
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Perimeter_top_ZN_4_LSr, !- Name
|
|
Perimeter_top_ZN_4, !- Output:Variable or Output:Meter Index Key Name
|
|
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Perimeter_top_ZN_4_Occ_Sensor, !- Name
|
|
Perimeter_top_ZN_4, !- Output:Variable or Output:Meter Index Key Name
|
|
People Occupant Count; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:InternalVariable,
|
|
Perimeter_top_ZN_4_Area, !- Name
|
|
Perimeter_top_ZN_4, !- Internal Data Index Key Name
|
|
Zone Floor Area; !- Internal Data Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
Perimeter_top_ZN_4_Light_Actuator, !- Name
|
|
Perimeter_top_ZN_4_lights, !- Actuated Component Unique Name
|
|
Lights, !- Actuated Component Type
|
|
Electric Power Level; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Program,
|
|
SET_Perimeter_top_ZN_4_Light_EMS_Program, !- Name
|
|
SET Perimeter_top_ZN_4_LSr_IP =0.093*Perimeter_top_ZN_4_LSr/Perimeter_top_ZN_4_Area, ! Calculate the actual LPD for each hour
|
|
IF (Perimeter_top_ZN_4_Occ_Sensor <= 0) && (Perimeter_top_ZN_4_LSr_IP >= 0.02),
|
|
SET Perimeter_top_ZN_4_Light_Actuator = 0.02*Perimeter_top_ZN_4_Area/0.09290304,
|
|
ELSE,
|
|
SET Perimeter_top_ZN_4_Light_Actuator = NULL,
|
|
ENDIF;
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
SET_Perimeter_top_ZN_4_Light_EMS_Program_Prog_Manager, !- Name
|
|
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
|
|
SET_Perimeter_top_ZN_4_Light_EMS_Program; !- Program Name 1
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Perimeter_bot_ZN_3_LSr, !- Name
|
|
Perimeter_bot_ZN_3, !- Output:Variable or Output:Meter Index Key Name
|
|
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Perimeter_bot_ZN_3_Occ_Sensor, !- Name
|
|
Perimeter_bot_ZN_3, !- Output:Variable or Output:Meter Index Key Name
|
|
People Occupant Count; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:InternalVariable,
|
|
Perimeter_bot_ZN_3_Area, !- Name
|
|
Perimeter_bot_ZN_3, !- Internal Data Index Key Name
|
|
Zone Floor Area; !- Internal Data Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
Perimeter_bot_ZN_3_Light_Actuator, !- Name
|
|
Perimeter_bot_ZN_3_lights, !- Actuated Component Unique Name
|
|
Lights, !- Actuated Component Type
|
|
Electric Power Level; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Program,
|
|
SET_Perimeter_bot_ZN_3_Light_EMS_Program, !- Name
|
|
SET Perimeter_bot_ZN_3_LSr_IP =0.093*Perimeter_bot_ZN_3_LSr/Perimeter_bot_ZN_3_Area, ! Calculate the actual LPD for each hour
|
|
IF (Perimeter_bot_ZN_3_Occ_Sensor <= 0) && (Perimeter_bot_ZN_3_LSr_IP >= 0.02),
|
|
SET Perimeter_bot_ZN_3_Light_Actuator = 0.02*Perimeter_bot_ZN_3_Area/0.09290304,
|
|
ELSE,
|
|
SET Perimeter_bot_ZN_3_Light_Actuator = NULL,
|
|
ENDIF;
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
SET_Perimeter_bot_ZN_3_Light_EMS_Program_Prog_Manager, !- Name
|
|
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
|
|
SET_Perimeter_bot_ZN_3_Light_EMS_Program; !- Program Name 1
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Perimeter_bot_ZN_2_LSr, !- Name
|
|
Perimeter_bot_ZN_2, !- Output:Variable or Output:Meter Index Key Name
|
|
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Perimeter_bot_ZN_2_Occ_Sensor, !- Name
|
|
Perimeter_bot_ZN_2, !- Output:Variable or Output:Meter Index Key Name
|
|
People Occupant Count; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:InternalVariable,
|
|
Perimeter_bot_ZN_2_Area, !- Name
|
|
Perimeter_bot_ZN_2, !- Internal Data Index Key Name
|
|
Zone Floor Area; !- Internal Data Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
Perimeter_bot_ZN_2_Light_Actuator, !- Name
|
|
Perimeter_bot_ZN_2_lights, !- Actuated Component Unique Name
|
|
Lights, !- Actuated Component Type
|
|
Electric Power Level; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Program,
|
|
SET_Perimeter_bot_ZN_2_Light_EMS_Program, !- Name
|
|
SET Perimeter_bot_ZN_2_LSr_IP =0.093*Perimeter_bot_ZN_2_LSr/Perimeter_bot_ZN_2_Area, ! Calculate the actual LPD for each hour
|
|
IF (Perimeter_bot_ZN_2_Occ_Sensor <= 0) && (Perimeter_bot_ZN_2_LSr_IP >= 0.02),
|
|
SET Perimeter_bot_ZN_2_Light_Actuator = 0.02*Perimeter_bot_ZN_2_Area/0.09290304,
|
|
ELSE,
|
|
SET Perimeter_bot_ZN_2_Light_Actuator = NULL,
|
|
ENDIF;
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
SET_Perimeter_bot_ZN_2_Light_EMS_Program_Prog_Manager, !- Name
|
|
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
|
|
SET_Perimeter_bot_ZN_2_Light_EMS_Program; !- Program Name 1
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Perimeter_bot_ZN_1_LSr, !- Name
|
|
Perimeter_bot_ZN_1, !- Output:Variable or Output:Meter Index Key Name
|
|
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Perimeter_bot_ZN_1_Occ_Sensor, !- Name
|
|
Perimeter_bot_ZN_1, !- Output:Variable or Output:Meter Index Key Name
|
|
People Occupant Count; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:InternalVariable,
|
|
Perimeter_bot_ZN_1_Area, !- Name
|
|
Perimeter_bot_ZN_1, !- Internal Data Index Key Name
|
|
Zone Floor Area; !- Internal Data Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
Perimeter_bot_ZN_1_Light_Actuator, !- Name
|
|
Perimeter_bot_ZN_1_lights, !- Actuated Component Unique Name
|
|
Lights, !- Actuated Component Type
|
|
Electric Power Level; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Program,
|
|
SET_Perimeter_bot_ZN_1_Light_EMS_Program, !- Name
|
|
SET Perimeter_bot_ZN_1_LSr_IP =0.093*Perimeter_bot_ZN_1_LSr/Perimeter_bot_ZN_1_Area, ! Calculate the actual LPD for each hour
|
|
IF (Perimeter_bot_ZN_1_Occ_Sensor <= 0) && (Perimeter_bot_ZN_1_LSr_IP >= 0.02),
|
|
SET Perimeter_bot_ZN_1_Light_Actuator = 0.02*Perimeter_bot_ZN_1_Area/0.09290304,
|
|
ELSE,
|
|
SET Perimeter_bot_ZN_1_Light_Actuator = NULL,
|
|
ENDIF;
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
SET_Perimeter_bot_ZN_1_Light_EMS_Program_Prog_Manager, !- Name
|
|
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
|
|
SET_Perimeter_bot_ZN_1_Light_EMS_Program; !- Program Name 1
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Perimeter_bot_ZN_4_LSr, !- Name
|
|
Perimeter_bot_ZN_4, !- Output:Variable or Output:Meter Index Key Name
|
|
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Perimeter_bot_ZN_4_Occ_Sensor, !- Name
|
|
Perimeter_bot_ZN_4, !- Output:Variable or Output:Meter Index Key Name
|
|
People Occupant Count; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:InternalVariable,
|
|
Perimeter_bot_ZN_4_Area, !- Name
|
|
Perimeter_bot_ZN_4, !- Internal Data Index Key Name
|
|
Zone Floor Area; !- Internal Data Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
Perimeter_bot_ZN_4_Light_Actuator, !- Name
|
|
Perimeter_bot_ZN_4_lights, !- Actuated Component Unique Name
|
|
Lights, !- Actuated Component Type
|
|
Electric Power Level; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Program,
|
|
SET_Perimeter_bot_ZN_4_Light_EMS_Program, !- Name
|
|
SET Perimeter_bot_ZN_4_LSr_IP =0.093*Perimeter_bot_ZN_4_LSr/Perimeter_bot_ZN_4_Area, ! Calculate the actual LPD for each hour
|
|
IF (Perimeter_bot_ZN_4_Occ_Sensor <= 0) && (Perimeter_bot_ZN_4_LSr_IP >= 0.02),
|
|
SET Perimeter_bot_ZN_4_Light_Actuator = 0.02*Perimeter_bot_ZN_4_Area/0.09290304,
|
|
ELSE,
|
|
SET Perimeter_bot_ZN_4_Light_Actuator = NULL,
|
|
ENDIF;
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
SET_Perimeter_bot_ZN_4_Light_EMS_Program_Prog_Manager, !- Name
|
|
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
|
|
SET_Perimeter_bot_ZN_4_Light_EMS_Program; !- Program Name 1
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Perimeter_mid_ZN_3_LSr, !- Name
|
|
Perimeter_mid_ZN_3, !- Output:Variable or Output:Meter Index Key Name
|
|
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Perimeter_mid_ZN_3_Occ_Sensor, !- Name
|
|
Perimeter_mid_ZN_3, !- Output:Variable or Output:Meter Index Key Name
|
|
People Occupant Count; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:InternalVariable,
|
|
Perimeter_mid_ZN_3_Area, !- Name
|
|
Perimeter_mid_ZN_3, !- Internal Data Index Key Name
|
|
Zone Floor Area; !- Internal Data Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
Perimeter_mid_ZN_3_Light_Actuator, !- Name
|
|
Perimeter_mid_ZN_3_lights, !- Actuated Component Unique Name
|
|
Lights, !- Actuated Component Type
|
|
Electric Power Level; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Program,
|
|
SET_Perimeter_mid_ZN_3_Light_EMS_Program, !- Name
|
|
SET Perimeter_mid_ZN_3_LSr_IP =0.093*Perimeter_mid_ZN_3_LSr/Perimeter_mid_ZN_3_Area, ! Calculate the actual LPD for each hour
|
|
IF (Perimeter_mid_ZN_3_Occ_Sensor <= 0) && (Perimeter_mid_ZN_3_LSr_IP >= 0.02),
|
|
SET Perimeter_mid_ZN_3_Light_Actuator = 0.02*Perimeter_mid_ZN_3_Area/0.09290304,
|
|
ELSE,
|
|
SET Perimeter_mid_ZN_3_Light_Actuator = NULL,
|
|
ENDIF;
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
SET_Perimeter_mid_ZN_3_Light_EMS_Program_Prog_Manager, !- Name
|
|
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
|
|
SET_Perimeter_mid_ZN_3_Light_EMS_Program; !- Program Name 1
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Perimeter_mid_ZN_2_LSr, !- Name
|
|
Perimeter_mid_ZN_2, !- Output:Variable or Output:Meter Index Key Name
|
|
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Perimeter_mid_ZN_2_Occ_Sensor, !- Name
|
|
Perimeter_mid_ZN_2, !- Output:Variable or Output:Meter Index Key Name
|
|
People Occupant Count; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:InternalVariable,
|
|
Perimeter_mid_ZN_2_Area, !- Name
|
|
Perimeter_mid_ZN_2, !- Internal Data Index Key Name
|
|
Zone Floor Area; !- Internal Data Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
Perimeter_mid_ZN_2_Light_Actuator, !- Name
|
|
Perimeter_mid_ZN_2_lights, !- Actuated Component Unique Name
|
|
Lights, !- Actuated Component Type
|
|
Electric Power Level; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Program,
|
|
SET_Perimeter_mid_ZN_2_Light_EMS_Program, !- Name
|
|
SET Perimeter_mid_ZN_2_LSr_IP =0.093*Perimeter_mid_ZN_2_LSr/Perimeter_mid_ZN_2_Area, ! Calculate the actual LPD for each hour
|
|
IF (Perimeter_mid_ZN_2_Occ_Sensor <= 0) && (Perimeter_mid_ZN_2_LSr_IP >= 0.02),
|
|
IF (DaylightSavings==0) && ((Hour < 7) || (Hour > 16)), !- Hour check is to avoid conflict with Add. G
|
|
SET Perimeter_mid_ZN_2_Light_Actuator = 0.02*Perimeter_mid_ZN_2_Area/0.09290304,
|
|
ELSEIF (DaylightSavings==1) && ((Hour < 6) || (Hour > 15)), !- Hour check is to avoid conflict with Add. G 1
|
|
SET Perimeter_mid_ZN_2_Light_Actuator = 0.02*Perimeter_mid_ZN_2_Area/0.09290304,
|
|
ELSE,
|
|
SET Perimeter_mid_ZN_2_Light_Actuator = NULL,
|
|
ENDIF,
|
|
ELSE,
|
|
SET Perimeter_mid_ZN_2_Light_Actuator = NULL,
|
|
ENDIF;
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
SET_Perimeter_mid_ZN_2_Light_EMS_Program_Prog_Manager, !- Name
|
|
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
|
|
SET_Perimeter_mid_ZN_2_Light_EMS_Program; !- Program Name 1
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Perimeter_mid_ZN_1_LSr, !- Name
|
|
Perimeter_mid_ZN_1, !- Output:Variable or Output:Meter Index Key Name
|
|
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Perimeter_mid_ZN_1_Occ_Sensor, !- Name
|
|
Perimeter_mid_ZN_1, !- Output:Variable or Output:Meter Index Key Name
|
|
People Occupant Count; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:InternalVariable,
|
|
Perimeter_mid_ZN_1_Area, !- Name
|
|
Perimeter_mid_ZN_1, !- Internal Data Index Key Name
|
|
Zone Floor Area; !- Internal Data Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
Perimeter_mid_ZN_1_Light_Actuator, !- Name
|
|
Perimeter_mid_ZN_1_lights, !- Actuated Component Unique Name
|
|
Lights, !- Actuated Component Type
|
|
Electric Power Level; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Program,
|
|
SET_Perimeter_mid_ZN_1_Light_EMS_Program, !- Name
|
|
SET Perimeter_mid_ZN_1_LSr_IP =0.093*Perimeter_mid_ZN_1_LSr/Perimeter_mid_ZN_1_Area, ! Calculate the actual LPD for each hour
|
|
IF (Perimeter_mid_ZN_1_Occ_Sensor <= 0) && (Perimeter_mid_ZN_1_LSr_IP >= 0.02),
|
|
SET Perimeter_mid_ZN_1_Light_Actuator = 0.02*Perimeter_mid_ZN_1_Area/0.09290304,
|
|
ELSE,
|
|
SET Perimeter_mid_ZN_1_Light_Actuator = NULL,
|
|
ENDIF;
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
SET_Perimeter_mid_ZN_1_Light_EMS_Program_Prog_Manager, !- Name
|
|
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
|
|
SET_Perimeter_mid_ZN_1_Light_EMS_Program; !- Program Name 1
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Perimeter_mid_ZN_4_LSr, !- Name
|
|
Perimeter_mid_ZN_4, !- Output:Variable or Output:Meter Index Key Name
|
|
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
Perimeter_mid_ZN_4_Occ_Sensor, !- Name
|
|
Perimeter_mid_ZN_4, !- Output:Variable or Output:Meter Index Key Name
|
|
People Occupant Count; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:InternalVariable,
|
|
Perimeter_mid_ZN_4_Area, !- Name
|
|
Perimeter_mid_ZN_4, !- Internal Data Index Key Name
|
|
Zone Floor Area; !- Internal Data Type
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
Perimeter_mid_ZN_4_Light_Actuator, !- Name
|
|
Perimeter_mid_ZN_4_lights, !- Actuated Component Unique Name
|
|
Lights, !- Actuated Component Type
|
|
Electric Power Level; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:Program,
|
|
SET_Perimeter_mid_ZN_4_Light_EMS_Program, !- Name
|
|
SET Perimeter_mid_ZN_4_LSr_IP =0.093*Perimeter_mid_ZN_4_LSr/Perimeter_mid_ZN_4_Area, ! Calculate the actual LPD for each hour
|
|
IF (Perimeter_mid_ZN_4_Occ_Sensor <= 0) && (Perimeter_mid_ZN_4_LSr_IP >= 0.02),
|
|
SET Perimeter_mid_ZN_4_Light_Actuator = 0.02*Perimeter_mid_ZN_4_Area/0.09290304,
|
|
ELSE,
|
|
SET Perimeter_mid_ZN_4_Light_Actuator = NULL,
|
|
ENDIF;
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
SET_Perimeter_mid_ZN_4_Light_EMS_Program_Prog_Manager, !- Name
|
|
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
|
|
SET_Perimeter_mid_ZN_4_Light_EMS_Program; !- Program Name 1
|
|
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
VAV_bot_OA_VRP, !- Name
|
|
PACU_VAV_bot, !- Output:Variable or Output:Meter Index Key Name
|
|
Air System Outdoor Air Mechanical Ventilation Requested Mass Flow Rate; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
VAV_bot_OA, !- Name
|
|
PACU_VAV_bot, !- Output:Variable or Output:Meter Index Key Name
|
|
Air System Outdoor Air Mass Flow Rate; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
VAV_bot_SUPPLY_FLOW, !- Name
|
|
PACU_VAV_bot_OA-PACU_VAV_bot_CoolCNode, !- Output:Variable or Output:Meter Index Key Name
|
|
System Node Standard Density Volume Flow Rate; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
VAV_bot_MAX_OA_FRAC, !- Name
|
|
VAV_bot Max OA Fraction, !- Actuated Component Unique Name
|
|
Schedule:Constant, !- Actuated Component Type
|
|
Schedule Value; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
VAV_bot_MAX_OA_FRAC_Prog_Manager,!- Name
|
|
InsideHVACSystemIterationLoop, !- EnergyPlus Model Calling Point
|
|
VAV_bot_MAX_OA_FRAC; !- Program Name 1
|
|
|
|
EnergyManagementSystem:Program,
|
|
VAV_bot_MAX_OA_FRAC, !- Name
|
|
IF VAV_bot_OA > VAV_bot_OA_VRP, !- Program Line 1
|
|
SET VAV_bot_MAX_OA_FRAC = NULL, !- Program Line 2
|
|
ELSE, !- A4
|
|
IF VAV_bot_SUPPLY_FLOW > 0, !- A5
|
|
SET VAV_bot_MAX_OA_FRAC = 0.9561 / VAV_bot_SUPPLY_FLOW,!- A6
|
|
ELSE, !- A7
|
|
SET VAV_bot_MAX_OA_FRAC = NULL, !- A8
|
|
ENDIF, !- A9
|
|
ENDIF; !- A10
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
VAV_mid_OA_VRP, !- Name
|
|
PACU_VAV_mid, !- Output:Variable or Output:Meter Index Key Name
|
|
Air System Outdoor Air Mechanical Ventilation Requested Mass Flow Rate; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
VAV_mid_OA, !- Name
|
|
PACU_VAV_mid, !- Output:Variable or Output:Meter Index Key Name
|
|
Air System Outdoor Air Mass Flow Rate; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
VAV_mid_SUPPLY_FLOW, !- Name
|
|
PACU_VAV_mid_OA-PACU_VAV_mid_CoolCNode, !- Output:Variable or Output:Meter Index Key Name
|
|
System Node Standard Density Volume Flow Rate; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
VAV_mid_MAX_OA_FRAC, !- Name
|
|
VAV_mid Max OA Fraction, !- Actuated Component Unique Name
|
|
Schedule:Constant, !- Actuated Component Type
|
|
Schedule Value; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
VAV_mid_MAX_OA_FRAC_Prog_Manager,!- Name
|
|
InsideHVACSystemIterationLoop, !- EnergyPlus Model Calling Point
|
|
VAV_mid_MAX_OA_FRAC; !- Program Name 1
|
|
|
|
EnergyManagementSystem:Program,
|
|
VAV_mid_MAX_OA_FRAC, !- Name
|
|
IF VAV_mid_OA > VAV_mid_OA_VRP, !- Program Line 1
|
|
SET VAV_mid_MAX_OA_FRAC = NULL, !- Program Line 2
|
|
ELSE, !- A4
|
|
IF VAV_mid_SUPPLY_FLOW > 0, !- A5
|
|
SET VAV_mid_MAX_OA_FRAC = 0.9561 / VAV_mid_SUPPLY_FLOW,!- A6
|
|
ELSE, !- A7
|
|
SET VAV_mid_MAX_OA_FRAC = NULL, !- A8
|
|
ENDIF, !- A9
|
|
ENDIF; !- A10
|
|
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
VAV_top_OA_VRP, !- Name
|
|
PACU_VAV_top, !- Output:Variable or Output:Meter Index Key Name
|
|
Air System Outdoor Air Mechanical Ventilation Requested Mass Flow Rate; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
VAV_top_OA, !- Name
|
|
PACU_VAV_top, !- Output:Variable or Output:Meter Index Key Name
|
|
Air System Outdoor Air Mass Flow Rate; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Sensor,
|
|
VAV_top_SUPPLY_FLOW, !- Name
|
|
PACU_VAV_top_OA-PACU_VAV_top_CoolCNode, !- Output:Variable or Output:Meter Index Key Name
|
|
System Node Standard Density Volume Flow Rate; !- Output:Variable or Output:Meter Name
|
|
|
|
EnergyManagementSystem:Actuator,
|
|
VAV_top_MAX_OA_FRAC, !- Name
|
|
VAV_top Max OA Fraction, !- Actuated Component Unique Name
|
|
Schedule:Constant, !- Actuated Component Type
|
|
Schedule Value; !- Actuated Component Control Type
|
|
|
|
EnergyManagementSystem:ProgramCallingManager,
|
|
VAV_top_MAX_OA_FRAC_Prog_Manager,!- Name
|
|
InsideHVACSystemIterationLoop, !- EnergyPlus Model Calling Point
|
|
VAV_top_MAX_OA_FRAC; !- Program Name 1
|
|
|
|
EnergyManagementSystem:Program,
|
|
VAV_top_MAX_OA_FRAC, !- Name
|
|
IF VAV_top_OA > VAV_top_OA_VRP, !- Program Line 1
|
|
SET VAV_top_MAX_OA_FRAC = NULL, !- Program Line 2
|
|
ELSE, !- A4
|
|
IF VAV_top_SUPPLY_FLOW > 0, !- A5
|
|
SET VAV_top_MAX_OA_FRAC = 0.9561 / VAV_top_SUPPLY_FLOW,!- A6
|
|
ELSE, !- A7
|
|
SET VAV_top_MAX_OA_FRAC = NULL, !- A8
|
|
ENDIF, !- A9
|
|
ENDIF; !- A10
|
|
|
|
|
|
|
|
|
|
|