diff --git a/tests/input_data/ASHRAE90.1_OfficeLarge_STD2016_Buffalo.idf b/tests/input_data/ASHRAE90.1_OfficeLarge_STD2016_Buffalo.idf new file mode 100644 index 0000000..33ccf67 --- /dev/null +++ b/tests/input_data/ASHRAE90.1_OfficeLarge_STD2016_Buffalo.idf @@ -0,0 +1,19627 @@ +! The 90.1 Prototype Building Models were developed by Pacific Northwest National Laboratory (PNNL), +! under contract with the U.S. Department of Energy (DOE). These building models were derived from +! DOE’s Commercial Reference Building Models with modifications based on input from the ASHRAE Standard 90.1 committee, +! the Advanced Energy Design Guide series, and building industry experts. +! The prototypes models were developed to quantify energy saving impacts from +! newly published editions of ASHRAE Standard 90.1. The basic building descriptions can be found in the Scorecards +! posted at this website. Detailed descriptions of the prototype model development and addenda modeling +! strategies can be found in the following reports: +! "Achieving 30% Goal: Energy and Cost Saving Analysis of ASHRAE/IES Standard 90.1-2010." +! "Enhancements to ASHRAE Standard 90.1 Prototype Building Models" +! "Energy Savings Analysis: ANSI/ASHRAE/IES Standard 90.1-2016" +! "ANSI/ASHRAE/IES Standard 90.1-2013 Determination of Energy Savings: Quantitative Analysis" +! +! BEGIN ECONOMIZER MAP +! NOTE: no economizer map is created for this prototype due to water cooling +! END ECONOMIZER MAP + +! Start SimMetaData +! CodeStandard=ASHRAE 90.1-2004 +! Std62Version=2004 +! RoofConstruction=Insulation Entirely Above Deck +! ExtWallConstruction=Mass +! End SimMetaData +! WeatherFile: USA_NY_Buffalo.Niagara.Intl.AP.725280_TMY3.epw +! GPARM parameters as input: +! Case = DOE.determination2016_OfficeLarge_STD2016_Chicago +! weatherfile = USA_NY_Buffalo.Niagara.Intl.AP.725280_TMY3.epw +! basement_tempt = Zone5A_nonres_R7.5_OfficeLarge_Buffalo_STD2016_out.idf +! avg_oa_tempt_ip = 48.14 +! maxdiff_oa_tempt_ip = 47.16 +! ext_wall_type = MassWall +! nonres_ext_wall_ufactor = 0.51104367 +! roof_type = MetalDeckRoof +! nonres_roof_ufactor = 0.181704416 +! roof_solar_absorp = 0.7 +! roof_emissivity = 0.9 +! nonres_window = Window_U_0.41_SHGC_0.38 +! sidelighting_control = yes_AY +! LPD_office = 8.503489229 +! exterior_lights_watts = 0 +! exterior_lights_watts_a = 12979.2 +! exterior_lights_watts_b = 968.1 +! economizer = DifferentialDryBulb +! skip_economizer_control = Yes +! damper_sche = MinOA_MotorizedDamper_Sched +! cc_sa_humidity = 0.0085 +! condenser_pump_head = 148556.6249 +! chilledwater_pump_head = 44761.27683 +! chilledwater_pump_secondary_head = 134283.8305 +! avg_oa_tempt = 8.966666667 +! maxdiff_oa_tempt = 26.2 +! infil = 0.00056896 +! oa_flow_per_area = 0.000431773 +! SAT_reset_switch = Yes +! SAT_reset_T = 15.6 +! CAV_bas_ERV = No +! economizer_lockout = NoLockout +! eco_max_temp_limit = na +! heating_damper_act = reverse +! add_ck_vav_bot = Yes +! add_ck_vav_mid = Yes +! add_ck_vav_top = Yes +! core_bottom_mdp = 0.350126958326493 +! perimeter_bot_zn_1_mdp = 0.2 +! perimeter_bot_zn_2_mdp = 0.2 +! perimeter_bot_zn_3_mdp = 0.272142928526643 +! perimeter_bot_zn_4_mdp = 0.2 +! core_mid_mdp = 0.352451847263012 +! perimeter_mid_zn_1_mdp = 0.2 +! perimeter_mid_zn_2_mdp = 0.2 +! perimeter_mid_zn_3_mdp = 0.282138420658207 +! perimeter_mid_zn_4_mdp = 0.2 +! core_top_mdp = 0.357010610037435 +! perimeter_top_zn_1_mdp = 0.2 +! perimeter_top_zn_2_mdp = 0.2 +! perimeter_top_zn_3_mdp = 0.255775329072062 +! perimeter_top_zn_4_mdp = 0.2 +! vav_bot_oaf = 2.53804133333333 +! vav_mid_oaf = 25.3803333333333 +! vav_top_oaf = 2.53804133333333 +! BLDG_ELEVATORS_LIGHTS_FAN_SCH = ELEV_LIGHT_FAN_SCH_ADD_DF +! BLDG_ELEVATORS_LIGHTS_FAN_POWER = 752 +! bsmt_new = Zone5A_nonres_R7.5_OfficeLarge_Buffalo_STD2016_out.idf +! osc_key_wall = surfPropOthSdCoefBasementAvgWall +! osc_key_floor = surfPropOthSdCoefBasementAvgFloor +! BLDG_EQUIP_SCH = BLDG_EQUIP_SCH_ADV +! addendum_cd = 2016AS +! PumpCurve_flag = pump_ride_on_curve +! pv_generator = no +! pv_surface_area = 0 +! STD189_overhang = no +! swh_et = 0.803988738 +! swh_ua = 11.25413987 +! ext_lgt_sch = Exterior_Lgt_ALWAYS_ON +! VAV_bot_WITH_REHEAT_ERV = Yes +! VAV_mid_WITH_REHEAT_ERV = Yes +! VAV_top_WITH_REHEAT_ERV = Yes +! CAV_bas_ERV_power = 911.0574 +! VAV_bot_WITH_REHEAT_ERV_power = 1871.04465666666 +! VAV_mid_WITH_REHEAT_ERV_power = 1871.03891666666 +! VAV_top_WITH_REHEAT_ERV_power = 1871.04465666666 +! LTG_SCH_SET = LTG_SET_STD2013 +! transformer_size = 500000 +! transformer_eff = 0.991 +! economizer_coredatacenter = DifferentialDryBulb +! economizer_itcloset = NoEconomizer +! HtgSetP_Sch = HTGSETP_SCH_YES_OPTIMUM +! ClgSetP_Sch = CLGSETP_SCH_YES_OPTIMUM +! wwr = 0.4 +! pipe_heat_loss = 7280.88 +! add_as = yes +! preheatcoil_exists = no +! AddendumAF_TowerFan = Yes +! skip_EMSprogram = yes +! BoilerAM = Yes +! OA_BASED_OPTIMUM_START_EMS = yes +! OPTIMUM_START_SF_DEPENDENT_EMS = no +! HtgSetP_Sch_CAV_bas = HTGSETP_SCH_YES_OPTIMUM +! ClgSetP_Sch_CAV_bas = CLGSETP_SCH_YES_OPTIMUM +! Wfile_TMY3 = USA_NY_Buffalo.Niagara.Intl.AP.725280_TMY3.epw +! loadProfile = No +! addendum_DV = yes +! receptacle_ctrl_occ_reduction_frac = 0.949143263 +! receptacle_ctrl_unocc_reduction_frac = 0.736941088 +! HOTW_ST_Reset = No +! CHW_ST_Reset = No +! SHW_Pump_Head = 29891 +! CodeName = ASHRAE90.1_STD2016 +! CZ_City_Old = Chicago +! CZ_Label = 5A +! exterior_lights_watts_c = 26026.9 +! Addendum_AH = Yes +! LPD_Ctrl = 0.02 +! con_swingdoor_r = 0.475963827 +! CHW_deltaT = 8.33 +! HOTW_PumpCurve_flag = pump_ride_on_curve + + + + + VERSION,8.0; + +!- =========== ALL OBJECTS IN CLASS: BUILDING =========== + + + Building, + Large Office, !- Name + 0.0000, !- North Axis {deg} + City, !- Terrain + 0.0400, !- Loads Convergence Tolerance Value + 0.2000, !- Temperature Convergence Tolerance Value {deltaC} + FullInteriorAndExterior, !- Solar Distribution + 25, !- Maximum Number of Warmup Days + 6; !- Minimum Number of Warmup Days + +!- =========== ALL OBJECTS IN CLASS: TIMESTEP IN HOUR =========== + + + Timestep,4; + +!- =========== ALL OBJECTS IN CLASS: SYSTEM CONVERGENCE LIMITS =========== +!- =========== ALL OBJECTS IN CLASS: INSIDE CONVECTION ALGORITHM =========== + + + SurfaceConvectionAlgorithm:Inside,TARP; + +!- =========== ALL OBJECTS IN CLASS: OUTSIDE CONVECTION ALGORITHM =========== + + + SurfaceConvectionAlgorithm:Outside,TARP; + +!- =========== ALL OBJECTS IN CLASS: SOLUTION ALGORITHM =========== + + + HeatBalanceAlgorithm,ConductionTransferFunction; + +!- =========== ALL OBJECTS IN CLASS: SHADOWING CALCULATIONS =========== + + + ShadowCalculation, + AverageOverDaysInFrequency, !- Calculation Method + 30; !- Calculation Frequency + +!- =========== ALL OBJECTS IN CLASS: RUN CONTROL =========== + + + SimulationControl, + Yes, !- Do Zone Sizing Calculation + Yes, !- Do System Sizing Calculation + Yes, !- Do Plant Sizing Calculation + Yes, !- Run Simulation for Sizing Periods +YES; !- Run Simulation for Weather File Run Periods + +!- =========== ALL OBJECTS IN CLASS: RUNPERIOD =========== + + + RunPeriod, + , !- Name + 1, !- Begin Month + 1, !- Begin Day of Month + 12, !- End Month + 31, !- End Day of Month + Sunday, !- Day of Week for Start Day + No, !- Use Weather File Holidays and Special Days + No, !- Use Weather File Daylight Saving Period + No, !- Apply Weekend Holiday Rule + Yes, !- Use Weather File Rain Indicators + Yes; !- Use Weather File Snow Indicators + +!- =========== ALL OBJECTS IN CLASS: SPECIALDAYPERIOD =========== +! US National Holidays + + + RunPeriodControl:SpecialDays, + New Years Day, !- Name + January 1, !- Start Date + 1, !- Duration {days} + Holiday; !- Special Day Type + + + + RunPeriodControl:SpecialDays, + Veterans Day, !- Name + November 11, !- Start Date + 1, !- Duration {days} + Holiday; !- Special Day Type + + + + RunPeriodControl:SpecialDays, + Christmas, !- Name + December 25, !- Start Date + 1, !- Duration {days} + Holiday; !- Special Day Type + + + + RunPeriodControl:SpecialDays, + Independence Day, !- Name + July 4, !- Start Date + 1, !- Duration {days} + Holiday; !- Special Day Type + + + + RunPeriodControl:SpecialDays, + MLK Day, !- Name + 3rd Monday in January, !- Start Date + 1, !- Duration {days} + Holiday; !- Special Day Type + + + + RunPeriodControl:SpecialDays, + Presidents Day, !- Name + 3rd Monday in February, !- Start Date + 1, !- Duration {days} + Holiday; !- Special Day Type + + + + RunPeriodControl:SpecialDays, + Memorial Day, !- Name + Last Monday in May, !- Start Date + 1, !- Duration {days} + Holiday; !- Special Day Type + + + + RunPeriodControl:SpecialDays, + Labor Day, !- Name + 1st Monday in September, !- Start Date + 1, !- Duration {days} + Holiday; !- Special Day Type + + + + RunPeriodControl:SpecialDays, + Columbus Day, !- Name + 2nd Monday in October, !- Start Date + 1, !- Duration {days} + Holiday; !- Special Day Type + + + + RunPeriodControl:SpecialDays, + Thanksgiving, !- Name + 4th Thursday in November,!- Start Date + 1, !- Duration {days} + Holiday; !- Special Day Type + +!- =========== ALL OBJECTS IN CLASS: DAYLIGHTSAVINGPERIOD =========== +! Daylight Saving Period in US + + + RunPeriodControl:DaylightSavingTime, + 2nd Sunday in March, !- Start Date + 1st Sunday in November; !- End Date + +!- =========== ALL OBJECTS IN CLASS: LOCATION =========== +! Site:Location and design-day objects created by: +! /projects/bigsim/bin/ddy2idf /projects/bigsim/weather/EnergyPlus/tmy3.new/all/USA_NY_Buffalo.Niagara.Intl.AP.725280_TMY3.ddy +! +Site:Location, + Buffalo.Niagara.Intl.AP_NY_USA WMO=725280, !- Site:Location Name + 42.94, !- Latitude {N+ S-} + -78.74, !- Longitude {W- E+} + -5.00, !- Time Zone Relative to GMT {GMT+/-} + 215.00; !- Elevation {m} + +SizingPeriod:DesignDay, + Buffalo.Niagara.Intl.AP_NY_USA Ann Htg 99.6% Condns DB, !- Name + 1, !- Month + 21, !- Day of Month + WinterDesignDay,!- Day Type + -16.3, !- Maximum Dry-Bulb Temperature {C} + 0.0, !- Daily Dry-Bulb Temperature Range {C} + DefaultMultipliers, !- Dry-Bulb Temperature Range Modifier Type + , !- Dry-Bulb Temperature Range Modifier Day Schedule Name + Wetbulb, !- Humidity Condition Type + -16.3, !- Wetbulb at Maximum Dry-Bulb {C} + , !- Humidity Indicating Day Schedule Name + , !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir} + , !- Enthalpy at Maximum Dry-Bulb {J/kg} + , !- Daily WetBulb Temperature Range {deltaC} + 98769., !- Barometric Pressure {Pa} + 5.1, !- Wind Speed {m/s} design conditions vs. traditional 6.71 m/s (15 mph) + 270, !- Wind Direction {Degrees; N=0, S=180} + No, !- Rain {Yes/No} + No, !- Snow on ground {Yes/No} + No, !- Daylight Savings Time Indicator + ASHRAEClearSky, !- Solar Model Indicator + , !- Beam Solar Day Schedule Name + , !- Diffuse Solar Day Schedule Name + , !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) + , !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) + 0.00; !- Clearness {0.0 to 1.1} + +SizingPeriod:DesignDay, + Buffalo.Niagara.Intl.AP_NY_USA Ann Clg .4% Condns DB=>MWB, !- Name + 7, !- Month + 21, !- Day of Month + SummerDesignDay,!- Day Type + 30.3, !- Maximum Dry-Bulb Temperature {C} + 9.3, !- Daily Dry-Bulb Temperature Range {C} + DefaultMultipliers, !- Dry-Bulb Temperature Range Modifier Type + , !- Dry-Bulb Temperature Range Modifier Day Schedule Name + Wetbulb, !- Humidity Condition Type + 21.8, !- Wetbulb at Maximum Dry-Bulb {C} + , !- Humidity Indicating Day Schedule Name + , !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir} + , !- Enthalpy at Maximum Dry-Bulb {J/kg} + , !- Daily WetBulb Temperature Range {deltaC} + 98769., !- Barometric Pressure {Pa} + 5.7, !- Wind Speed {m/s} design conditions vs. traditional 3.35 m/s (7mph) + 240, !- Wind Direction {Degrees; N=0, S=180} + No, !- Rain {Yes/No} + No, !- Snow on ground {Yes/No} + No, !- Daylight Savings Time Indicator + ASHRAETau, !- Solar Model Indicator + , !- Beam Solar Day Schedule Name + , !- Diffuse Solar Day Schedule Name + 0.462, !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) + 2.001; !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) + +!- =========== ALL OBJECTS IN CLASS: GROUNDTEMPERATURES =========== + + + ! ======================================================================== + ! The following was created by the Basement preprocessor program. + ! Weather File Location=Buffalo Niagara Intl AP NY USA TMY3 + ! + +SurfaceProperty:OtherSideCoefficients, + surfPropOthSdCoefBasementAvgWall, !- Name + 0.0, !- Combined Convective Radiative Film Coefficient + 1.0, !- Constant Temperature + 1.0, !- Constant Temperature Coefficient + 0.0, !- External Dry-Bulb Temperature Coefficient + 0.0, !- Ground Temperature Coefficient + 0.0, !- Wind Speed Coefficient + 0.0, !- Zone Air Temperature Coefficient + scheduleOSCBasementWallSurfaceTemp, !- Constant Temperature Schedule Name + No, !- Sinusoidal Variation of Constant Temperature Coefficient + 24; !- Period of Sinusoidal Variation + +Schedule:Compact, + scheduleOSCBasementWallSurfaceTemp, !- Name + Temperature, !- ScheduleType + Through: 1/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 18.90, !- Field + Through: 2/28, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 18.66, !- Field + Through: 3/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 19.38, !- Field + Through: 4/30, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 20.16, !- Field + Through: 5/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 21.04, !- Field + Through: 6/30, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 24.12, !- Field + Through: 7/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 24.95, !- Field + Through: 8/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 25.06, !- Field + Through: 9/30, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 24.56, !- Field + Through: 10/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 21.35, !- Field + Through: 11/30, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 20.41, !- Field + Through: 12/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 19.33; !- Field + +SurfaceProperty:OtherSideCoefficients, + surfPropOthSdCoefBasementAvgFloor, !- Name + 0.0, !- Combined Convective Radiative Film Coefficient + 1.0, !- Constant Temperature + 1.0, !- Constant Temperature Coefficient + 0.0, !- External Dry-Bulb Temperature Coefficient + 0.0, !- Ground Temperature Coefficient + 0.0, !- Wind Speed Coefficient + 0.0, !- Zone Air Temperature Coefficient + scheduleOSCBasementFloorTemp, !- Constant Temperature Schedule Name + No, !- Sinusoidal Variation of Constant Temperature Coefficient + 24; !- Period of Sinusoidal Variation + +Schedule:Compact, + scheduleOSCBasementFloorTemp, !- Name + Temperature, !- ScheduleType + Through: 1/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 20.83, !- Field + Through: 2/28, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 20.80, !- Field + Through: 3/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 20.78, !- Field + Through: 4/30, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 20.78, !- Field + Through: 5/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 20.78, !- Field + Through: 6/30, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 23.16, !- Field + Through: 7/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 23.55, !- Field + Through: 8/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 23.62, !- Field + Through: 9/30, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 23.65, !- Field + Through: 10/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 21.23, !- Field + Through: 11/30, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 20.93, !- Field + Through: 12/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 20.87; !- Field + +SurfaceProperty:OtherSideCoefficients, + surfPropOthSdCoefBasementUpperWall, !- Name + 0.0, !- Combined Convective Radiative Film Coefficient + 1.0, !- Constant Temperature + 1.0, !- Constant Temperature Coefficient + 0.0, !- External Dry-Bulb Temperature Coefficient + 0.0, !- Ground Temperature Coefficient + 0.0, !- Wind Speed Coefficient + 0.0, !- Zone Air Temperature Coefficient + scheduleOSCBasementUpperWallTemp, !- Constant Temperature Schedule Name + No, !- Sinusoidal Variation of Constant Temperature Coefficient + 24; !- Period of Sinusoidal Variation + +Schedule:Compact, + scheduleOSCBasementUpperWallTemp, !- Name + Temperature, !- ScheduleType + Through: 1/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 17.90, !- Field + Through: 2/28, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 17.70, !- Field + Through: 3/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 18.92, !- Field + Through: 4/30, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 20.03, !- Field + Through: 5/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 21.26, !- Field + Through: 6/30, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 24.59, !- Field + Through: 7/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 25.52, !- Field + Through: 8/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 25.46, !- Field + Through: 9/30, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 24.62, !- Field + Through: 10/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 20.92, !- Field + Through: 11/30, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 19.78, !- Field + Through: 12/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 18.28; !- Field + +SurfaceProperty:OtherSideCoefficients, + surfPropOthSdCoefBasementLowerWall, !- Name + 0.0, !- Combined Convective Radiative Film Coefficient + 1.0, !- Constant Temperature + 1.0, !- Constant Temperature Coefficient + 0.0, !- External Dry-Bulb Temperature Coefficient + 0.0, !- Ground Temperature Coefficient + 0.0, !- Wind Speed Coefficient + 0.0, !- Zone Air Temperature Coefficient + scheduleOSCBasementLowerWallTemp, !- Constant Temperature Schedule Name + No, !- Sinusoidal Variation of Constant Temperature Coefficient + 24; !- Period of Sinusoidal Variation + +Schedule:Compact, + scheduleOSCBasementLowerWallTemp, !- Name + Temperature, !- ScheduleType + Through: 1/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 19.88, !- Field + Through: 2/28, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 19.60, !- Field + Through: 3/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 19.83, !- Field + Through: 4/30, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 20.29, !- Field + Through: 5/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 20.82, !- Field + Through: 6/30, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 23.65, !- Field + Through: 7/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 24.40, !- Field + Through: 8/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 24.68, !- Field + Through: 9/30, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 24.51, !- Field + Through: 10/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 21.77, !- Field + Through: 11/30, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 21.02, !- Field + Through: 12/31, !- Field + For:AllDays, !- Field + Until:24:00, !- Field + 20.36; !- Field + +!- =========== ALL OBJECTS IN CLASS: WATER MAINS TEMPERATURES =========== + + Site:WaterMainsTemperature, + Correlation, !- Calculation Method + , !- Temperature Schedule Name + 8.966666667, !- Annual Average Outdoor Air Temperature {C} + 26.2; !- Maximum Difference In Monthly Average Outdoor Air Temperatures {deltaC} + +!- =========== ALL OBJECTS IN CLASS: MATERIAL:REGULAR-R =========== + + Material:NoMass, + Opaque Door panel_con, !- Name + MediumRough, !- Roughness + 0.475963827, !- Thermal Resistance {m2-K/W} + 0.9, !- Thermal Absorptance + 0.7, !- Solar Absorptance + 0.7; !- Visible Absorptance + +!- =========== ALL OBJECTS IN CLASS: CONSTRUCTION =========== + + Construction, + Swinging Door_con, !- Name + Opaque Door panel_con; !- Outside Layer + +!- =========== Opaque Constructions =========== +! ------------------------------------------------------------------ +! $Id: OpaqueLibraryScript_v30.idf,v 1.5 2010/10/21 19:30:30 atha577 Exp $ +! $Log: OpaqueLibraryScript_v30.idf,v $ +! Revision 1.5 2010/10/21 19:30:30 atha577 +! Removed bb constructions for skylights. +! +! Revision 1.4 2010/10/16 00:49:56 atha577 +! Minor change to bb code. +! +! Revision 1.3 2010/10/16 00:08:35 atha577 +! Added bb skylight constructions. +! +! Revision 1.2 2010/01/20 21:56:42 d3l143 +! reset R value of semi-heated Roof to 0.001 if the R values goes below 0.001. V4.0 has a 0.001 threshold with it. +! +! Revision 1.1 2010/01/20 21:49:30 d3l143 +! Initial revision +! +! Note: +! January 20, 2010: We experienced a problem in upgrading Warehouse from V3.0 to V4.0. +! The R value of the semiheated roof goes to around 0.0002 for Miami and Ryihad which V4.0 compliants that it is below 0.001. +! This was not a problem for V3.0. Here we implemented a temporal solution to re-set the r value to 0.001 when it is below it. +! ------------------------------------------------------------------ +! +!- =========== ALL OBJECTS IN CLASS: MATERIAL:REGULAR =========== + + Material, + Std Wood 6inch, !- Name + MediumSmooth, !- Roughness + 0.15, !- Thickness {m} + 0.12, !- Conductivity {W/m-K} + 540.0000, !- Density {kg/m3} + 1210, !- Specific Heat {J/kg-K} + 0.9000000, !- Thermal Absorptance + 0.7000000, !- Solar Absorptance + 0.7000000; !- Visible Absorptance + + Material, + AC02 Acoustic Ceiling, !- Name + MediumSmooth, !- Roughness + 1.2700000E-02, !- Thickness {m} + 5.7000000E-02, !- Conductivity {W/m-K} + 288.0000, !- Density {kg/m3} + 1339.000, !- Specific Heat {J/kg-K} + 0.9000000, !- Thermal Absorptance + 0.7000000, !- Solar Absorptance + 0.2000000; !- Visible Absorptance + + Material, + F07 25mm stucco, !- Name + Smooth, !- Roughness + 0.0254, !- Thickness {m} + 0.72, !- Conductivity {W/m-K} + 1856, !- Density {kg/m3} + 840, !- Specific Heat {J/kg-K} + 0.9, !- Thermal Absorptance + 0.7, !- Solar Absorptance + 0.7; !- Visible Absorptance + + Material, + F08 Metal surface, !- Name + Smooth, !- Roughness + 0.0008, !- Thickness {m} + 45.28, !- Conductivity {W/m-K} + 7824, !- Density {kg/m3} + 500; !- Specific Heat {J/kg-K} + + Material, + F08 Metal roof surface, !- Name + Smooth, !- Roughness + 0.0008, !- Thickness {m} + 45.28, !- Conductivity {W/m-K} + 7824, !- Density {kg/m3} + 500, !- Specific Heat {J/kg-K} + 0.9, !- Absorptance:Thermal + 0.7; !- Absorptance:Solar + + Material, + F12 Asphalt shingles, !- Name + VeryRough, !- Roughness + 0.0032, !- Thickness {m} + 0.04, !- Conductivity {W/m-K} + 1120, !- Density {kg/m3} + 1260, !- Specific Heat {J/kg-K} + 0.9, !- Absorptance:Thermal + 0.7; !- Absorptance:Solar + + Material, + F13 Built-up roofing, !- Name + Rough, !- Roughness + 0.0095, !- Thickness {m} + 0.16, !- Conductivity {W/m-K} + 1120, !- Density {kg/m3} + 1460, !- Specific Heat {J/kg-K} + 0.9, !- Absorptance:Thermal + 0.7; !- Absorptance:Solar + + Material, + G01 13mm gypsum board, !- Name + Smooth, !- Roughness + 0.0127, !- Thickness {m} + 0.1600, !- Conductivity {W/m-K} + 800.0000, !- Density {kg/m3} + 1090.0000, !- Specific Heat {J/kg-K} + 0.9000, !- Absorptance:Thermal + 0.7000, !- Absorptance:Solar + 0.5000; !- Absorptance:Visible + + Material, + G01 16mm gypsum board, !- Name + MediumSmooth, !- Roughness + 0.0159, !- Thickness {m} + 0.16, !- Conductivity {W/m-K} + 800, !- Density {kg/m3} + 1090; !- Specific Heat {J/kg-K} + + Material, + G02 16mm plywood, !- Name + Smooth, !- Roughness + 0.0159, !- Thickness {m} + 0.12, !- Conductivity {W/m-K} + 544, !- Density {kg/m3} + 1210; !- Specific Heat {J/kg-K} + + Material, + M14 150mm heavyweight concrete roof, !- Name + MediumRough, !- Roughness + 0.1524, !- Thickness {m} + 2.31, !- Conductivity {W/m-K} + 2322, !- Density {kg/m3} + 832; !- Specific Heat {J/kg-K} + + + Material, + 100mm Normalweight concrete wall, !- Name - based on 90.1-2004 Appendix-Table A3-1B + MediumRough, !- Roughness + 0.1016, !- Thickness {m} + 2.31, !- Conductivity {W/m-K} + 2322, !- Density {kg/m3} + 832; !- Specific Heat {J/kg-K} + + + Material, + 200mm Normalweight concrete wall, !- Name - based on 90.1-2004 Appendix-Table A3-1B + MediumRough, !- Roughness + 0.2032, !- Thickness {m} + 2.31, !- Conductivity {W/m-K} + 2322, !- Density {kg/m3} + 832; !- Specific Heat {J/kg-K} + + Material, + 100mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B + MediumRough, !- Roughness + 0.1016, !- Thickness {m} + 2.31, !- Conductivity {W/m-K} + 2322, !- Density {kg/m3} + 832; !- Specific Heat {J/kg-K} + + Material, + 150mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B + MediumRough, !- Roughness + 0.1524, !- Thickness {m} + 2.31, !- Conductivity {W/m-K} + 2322, !- Density {kg/m3} + 832; !- Specific Heat {J/kg-K} + + Material, + 200mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B + MediumRough, !- Roughness + 0.2032, !- Thickness {m} + 2.31, !- Conductivity {W/m-K} + 2322, !- Density {kg/m3} + 832; !- Specific Heat {J/kg-K} + + Material, + M10 200mm concrete block wall, !- Name + MediumRough, !- Roughness + 0.2032, !- Thickness {m} + 0.72, !- Conductivity {W/m-K} + 800, !- Density {kg/m3} + 832; !- Specific Heat {J/kg-K} + + Material, + M10 200mm concrete block basement wall, !- Name + MediumRough, !- Roughness + 0.2032, !- Thickness {m} + 1.326, !- Conductivity {W/m-K} + 1842, !- Density {kg/m3} + 912; !- Specific Heat {J/kg-K} + + + +!- =========== ALL OBJECTS IN CLASS: MATERIAL:REGULAR-R =========== +! Name +! Roughness +! Thermal Resistance +! Absorptance:Thermal -- +! Absorptance:Solar + + Material:NoMass, + CP02 CARPET PAD, !- Name + VeryRough, !- Roughness + 0.21648, !- Thermal Resistance {m2-K/W} + 0.9, !- Thermal Absorptance + 0.7, !- Solar Absorptance + 0.8; !- Visible Absorptance + + + Material:NoMass, + Air_Wall_Material, !- Name + Rough, !- Roughness + 0.2079491, !- Thermal Resistance {m2-K/W} + 0.9, !- Thermal Absorptance + 0.7; !- Solar Absorptance + + + Material:NoMass, + Nonres_Roof_Insulation, !- Name + MediumSmooth, !- Roughness + 5.30668495131472, + !- Thermal Resistance {m2-K/W} + 0.9, !- Absorptance:Thermal + 0.7, !- Absorptance:Solar + 0.7; !- Absorptance:Visible + + Material:NoMass, + Res_Roof_Insulation, !- Name + MediumSmooth, !- Roughness + 0.0299387330245182, + !- Thermal Resistance {m2-K/W} + 0.9, !- Thermal Absorptance + 0.7, !- Solar Absorptance + 0.7; !- Visible Absorptance + + Material:NoMass, + Semiheated_Roof_Insulation, !- Name + MediumSmooth, !- Roughness + 0.0299387330245182, + !- Thermal Resistance {m2-K/W} + 0.9, !- Thermal Absorptance + 0.7, !- Solar Absorptance + 0.7; !- Visible Absorptance + + + + Material:NoMass, + Nonres_Exterior_Wall_Insulation, !- Name + MediumSmooth, !- Roughness + 1.63974590315506, + !- Thermal Resistance {m2-K/W} + 0.9, !- Thermal Absorptance + 0.7, !- Solar Absorptance + 0.7; !- Visible Absorptance + + Material:NoMass, + Res_Exterior_Wall_Insulation, !- Name + MediumSmooth, !- Roughness + 0.0299387330245182, + !- Thermal Resistance {m2-K/W} + 0.9, !- Thermal Absorptance + 0.7, !- Solar Absorptance + 0.7; !- Visible Absorptance + + Material:NoMass, + Semiheated_Exterior_Wall_Insulation, !- Name + MediumSmooth, !- Roughness + 0.0299387330245182, + !- Thermal Resistance {m2-K/W} + 0.9, !- Thermal Absorptance + 0.7, !- Solar Absorptance + 0.7; !- Visible Absorptance + + + + Material:NoMass, + Nonres_Floor_Insulation, !- Name + MediumSmooth, !- Roughness + + 0.0299387330245182, + !- Thermal Resistance {m2-K/W} + 0.9, !- Thermal Absorptance + 0.7, !- Solar Absorptance + 0.7; !- Visible Absorptance + + Material:NoMass, + Res_Floor_Insulation, !- Name + MediumSmooth, !- Roughness + + 0.0299387330245182, + !- Thermal Resistance {m2-K/W} + 0.9, !- Thermal Absorptance + 0.7, !- Solar Absorptance + 0.7; !- Visible Absorptance + + Material:NoMass, + Semiheated_Floor_Insulation, !- Name + MediumSmooth, !- Roughness + + 0.0299387330245182, + !- Thermal Resistance {m2-K/W} + 0.9, !- Thermal Absorptance + 0.7, !- Solar Absorptance + 0.7; !- Visible Absorptance + +!- Door material properties taken from DOE Benchmark files released in Nov. 2008 + + Material:NoMass, + Std Opaque Door Panel, !- Name + MediumRough, !- Roughness + 0.123456790123457, !- (corresponds to default RSI-0.12327 or R-0.7) Thermal Resistance {m2-K/W} + 0.9, !- Thermal Absorptance + 0.7, !- Solar Absorptance + 0.7; !- Visible Absorptance + +!- =========== ALL OBJECTS IN CLASS: CONSTRUCTION =========== + + Construction, + InteriorFurnishings, !- Name + Std Wood 6inch; !- Outside Layer + + Construction, + Air_Wall, !- Name + Air_Wall_Material; !- Outside Layer + + Construction, + DropCeiling, !- Name + AC02 Acoustic Ceiling; !- Outside Layer + + Construction, + OpaqueDoor, !- Name + Std Opaque Door Panel; !- Outside Layer + + Construction, + AtticRoofDeck, !- Name + F12 Asphalt shingles, !- Outside Layer + G02 16mm plywood; !- Layer 2 + + Construction, + int_wall, !- Name + G01 13mm gypsum board, !- Outside Layer + G01 13mm gypsum board; !- Layer 2 + + Construction, + ext_slab_8in_with_carpet,!- Name + 200mm Normalweight concrete floor, !- Outside Layer + CP02 CARPET PAD; !- Layer 2 + + Construction, + ext_slab_8in, !- Name + 200mm Normalweight concrete floor; !- Outside Layer + + Construction, + ext_slab_6in_with_carpet,!- Name + 150mm Normalweight concrete floor, !- Outside Layer + CP02 CARPET PAD; !- Layer 2 + + Construction, + ext_slab_6in, !- Name + 150mm Normalweight concrete floor; !- Outside Layer + + Construction, + int_slab_floor, !- Name + 100mm Normalweight concrete floor, !- Outside Layer + CP02 CARPET PAD; !- Layer 2 + + Construction, + int_slab_ceiling, !- Name + CP02 CARPET PAD, !- Outside Layer + 100mm Normalweight concrete floor; !- Layer 2 + + Construction, + basement_wall, !- Name + M10 200mm concrete block basement wall; !- Outside Layer + + Construction, + int_wood_floor, !- Name + AC02 Acoustic Ceiling, !- Outside Layer + G02 16mm plywood, !- Layer 2 + CP02 CARPET PAD; !- Layer 3 + + Construction, + ext_soffit_floor, !- Name + G02 16mm plywood; !- Outside Layer + + Construction, + nonres_roof, !- Name + F13 Built-up roofing, !- Outside Layer + Nonres_Roof_Insulation, !- Layer #2 + F08 Metal surface; !- Layer #3 + + + Construction, + res_roof, !- Name + F13 Built-up roofing, !- Outside Layer + Res_Roof_Insulation, !- Layer #2 + F08 Metal surface; !- Layer #3 + + + Construction, + semiheated_roof, !- Name + F13 Built-up roofing, !- Outside Layer + Semiheated_Roof_Insulation, !- Layer #2 + F08 Metal surface; !- Layer #3 + + + + + Construction, + nonres_ext_wall, !- Name + 200mm Normalweight concrete wall, !- Outside Layer + Nonres_Exterior_Wall_Insulation, !- Layer #2 + G01 13mm gypsum board; !- Layer #3 + + + Construction, + res_ext_wall, !- Name + 200mm Normalweight concrete wall, !- Outside Layer + Res_Exterior_Wall_Insulation, !- Layer #2 + G01 13mm gypsum board; !- Layer #3 + + + Construction, + semiheated_ext_wall, !- Name + 200mm Normalweight concrete wall, !- Outside Layer + Semiheated_Exterior_Wall_Insulation, !- Layer #2 + G01 13mm gypsum board; !- Layer #3 + + + Construction, + nonres_floor, !- Name + Nonres_Floor_Insulation, !- Outside Layer + 100mm Normalweight concrete floor, !- Layer #1 + CP02 CARPET PAD; !- Layer #2 + + + Construction, + res_floor, !- Name + Res_Floor_Insulation, !- Outside Layer + 100mm Normalweight concrete floor, !- Layer #1 + CP02 CARPET PAD; !- Layer #2 + + + Construction, + semiheated_floor, !- Name + Semiheated_Floor_Insulation, !- Outside Layer + 100mm Normalweight concrete floor, !- Layer #1 + CP02 CARPET PAD; !- Layer #2 + + + Construction, + nonres_floor_ceiling, !- Name - reverse ordered layers for nonres_floor + CP02 CARPET PAD, !- Outside Layer + 100mm Normalweight concrete floor, !- Layer #1 + Nonres_Floor_Insulation; !- Layer #2 + + Construction, + res_floor_ceiling, !- Name - reverse ordered layers for res_floor + CP02 CARPET PAD, !- Outside Layer + 100mm Normalweight concrete floor, !- Layer #1 + Res_Floor_Insulation; !- Layer #2 + + Construction, + semiheated_floor_ceiling, !- Name - reverse ordered layers for semiheated_floor + CP02 CARPET PAD, !- Outside Layer + 100mm Normalweight concrete floor, !- Layer #1 + Semiheated_Floor_Insulation; !- Layer #2 + + + + + + +!- =========== Include EnergyPlus Window Library ============= +! ------------------------------------------------------------------ +! $Id: WindowsLibrary_v30.idf,v 1.6 2010/10/16 00:03:25 atha577 Exp $ +! $Log: WindowsLibrary_v30.idf,v $ +! Revision 1.6 2010/10/16 00:03:25 atha577 +! Deleted bb skylight constructions. Added them to opaquelibraryscript. +! +! Revision 1.6 2015/03/02 atha577 +! Added skylight constructions for IECC 2015 and 2012. +! +! Revision 1.5 2010/10/15 23:31:07 atha577 +! Added addendum bb skylight constructions. +! +! Revision 1.4 2010/10/14 22:53:47 atha577 +! Added new skylight constructions for bb +! +! Revision 1.3 2010/05/19 20:10:16 atha577 +! *** empty log message *** +! +! Revision 1.2 2010/05/19 20:08:49 atha577 +! added bb constructions. +! +! +! Revision 1.1 2010/01/20 21:58:41 d3l143 +! Initial revision +! Revised 5/19/2010: Added new constructions for bb from E+ window +! construction library +! +! Revised 1-7-2016. atha577 +! Added constructions for 90.1-2016 Fenestration Orientation +! +! + +! ------------------------------------------------------------------ +! +!- =========== ALL OBJECTS IN CLASS: MATERIAL:WINDOWGLASS =========== + + WindowMaterial:Glazing, + GREEN 6MM, !- Name + SpectralAverage, !- Optical Data Type + , !- Window Glass Spectral Data Set Name + 0.006, !- Thickness {m} + 0.487, !- Solar Transmittance at Normal Incidence + 0.056, !- Front Side Solar Reflectance at Normal Incidence + 0.056, !- Back Side Solar Reflectance at Normal Incidence + 0.749, !- Visible Transmittance at Normal Incidence + 0.070, !- Front Side Visible Reflectance at Normal Incidence + 0.070, !- Back Side Visible Reflectance at Normal Incidence + 0.0, !- Infrared Transmittance at Normal Incidence + 0.84, !- Front Side Infrared Hemispherical Emissivity + 0.84, !- Back Side Infrared Hemispherical Emissivity + 0.9; !- Conductivity {W/m-K} + +! ID 221 + + WindowMaterial:Glazing, + REF B CLEAR HI 6MM, !- Name + SpectralAverage, !- Optical Data Type + , !- Window Glass Spectral Data Set Name + 0.006, !- Thickness {m} + 0.240, !- Solar Transmittance at Normal Incidence + 0.160, !- Front Side Solar Reflectance at Normal Incidence + 0.320, !- Back Side Solar Reflectance at Normal Incidence + 0.300, !- Visible Transmittance at Normal Incidence + 0.160, !- Front Side Visible Reflectance at Normal Incidence + 0.290, !- Back Side Visible Reflectance at Normal Incidence + 0.0, !- Infrared Transmittance at Normal Incidence + 0.84, !- Front Side Infrared Hemispherical Emissivity + 0.60, !- Back Side Infrared Hemispherical Emissivity + 0.9; !- Conductivity {W/m-K} + + WindowMaterial:Glazing, + REF C CLEAR HI 6MM, !- Name + SpectralAverage, !- Optical Data Type + , !- Window Glass Spectral Data Set Name + 0.006, !- Thickness {m} + 0.200, !- Solar Transmittance at Normal Incidence + 0.160, !- Front Side Solar Reflectance at Normal Incidence + 0.390, !- Back Side Solar Reflectance at Normal Incidence + 0.220, !- Visible Transmittance at Normal Incidence + 0.170, !- Front Side Visible Reflectance at Normal Incidence + 0.350, !- Back Side Visible Reflectance at Normal Incidence + 0.0, !- Infrared Transmittance at Normal Incidence + 0.84, !- Front Side Infrared Hemispherical Emissivity + 0.55, !- Back Side Infrared Hemispherical Emissivity + 0.9; !- Conductivity {W/m-K} + + WindowMaterial:Glazing, + ECREF-1 COLORED 6MM, !- Name + SpectralAverage, !- Optical Data Type + , !- Window Glass Spectral Data Set Name + 0.006, !- Thickness {m} + 0.099, !- Solar Transmittance at Normal Incidence + 0.219, !- Front Side Solar Reflectance at Normal Incidence + 0.219, !- Back Side Solar Reflectance at Normal Incidence + 0.155, !- Visible Transmittance at Normal Incidence + 0.073, !- Front Side Visible Reflectance at Normal Incidence + 0.073, !- Back Side Visible Reflectance at Normal Incidence + 0.0, !- Infrared Transmittance at Normal Incidence + 0.84, !- Front Side Infrared Hemispherical Emissivity + 0.84, !- Back Side Infrared Hemispherical Emissivity + 0.9; !- Conductivity {W/m-K} + + WindowMaterial:Glazing, + REF B TINT MID 6MM, !- Name + SpectralAverage, !- Optical Data Type + , !- Window Glass Spectral Data Set Name + 0.006, !- Thickness {m} + 0.100, !- Solar Transmittance at Normal Incidence + 0.110, !- Front Side Solar Reflectance at Normal Incidence + 0.410, !- Back Side Solar Reflectance at Normal Incidence + 0.130, !- Visible Transmittance at Normal Incidence + 0.100, !- Front Side Visible Reflectance at Normal Incidence + 0.320, !- Back Side Visible Reflectance at Normal Incidence + 0.0, !- Infrared Transmittance at Normal Incidence + 0.84, !- Front Side Infrared Hemispherical Emissivity + 0.45, !- Back Side Infrared Hemispherical Emissivity + 0.9; !- Conductivity {W/m-K} + + WindowMaterial:Glazing, + CLEAR 6MM, !- Name + SpectralAverage, !- Optical Data Type + , !- Window Glass Spectral Data Set Name + 0.006, !- Thickness {m} + 0.775, !- Solar Transmittance at Normal Incidence + 0.071, !- Front Side Solar Reflectance at Normal Incidence + 0.071, !- Back Side Solar Reflectance at Normal Incidence + 0.881, !- Visible Transmittance at Normal Incidence + 0.080, !- Front Side Visible Reflectance at Normal Incidence + 0.080, !- Back Side Visible Reflectance at Normal Incidence + 0.0, !- Infrared Transmittance at Normal Incidence + 0.84, !- Front Side Infrared Hemispherical Emissivity + 0.84, !- Back Side Infrared Hemispherical Emissivity + 0.9; !- Conductivity {W/m-K} + + WindowMaterial:Glazing, + REF D CLEAR 6MM, !- Name + SpectralAverage, !- Optical Data Type + , !- Window Glass Spectral Data Set Name + 0.006, !- Thickness {m} + 0.429, !- Solar Transmittance at Normal Incidence + 0.308, !- Front Side Solar Reflectance at Normal Incidence + 0.379, !- Back Side Solar Reflectance at Normal Incidence + 0.334, !- Visible Transmittance at Normal Incidence + 0.453, !- Front Side Visible Reflectance at Normal Incidence + 0.505, !- Back Side Visible Reflectance at Normal Incidence + 0.0, !- Infrared Transmittance at Normal Incidence + 0.84, !- Front Side Infrared Hemispherical Emissivity + 0.82, !- Back Side Infrared Hemispherical Emissivity + 0.9; !- Conductivity {W/m-K} + + WindowMaterial:Glazing, + BLUE 6MM, !- Name + SpectralAverage, !- Optical Data Type + , !- Window Glass Spectral Data Set Name + 0.006, !- Thickness {m} + 0.480, !- Solar Transmittance at Normal Incidence + 0.050, !- Front Side Solar Reflectance at Normal Incidence + 0.050, !- Back Side Solar Reflectance at Normal Incidence + 0.570, !- Visible Transmittance at Normal Incidence + 0.060, !- Front Side Visible Reflectance at Normal Incidence + 0.060, !- Back Side Visible Reflectance at Normal Incidence + 0.0, !- Infrared Transmittance at Normal Incidence + 0.84, !- Front Side Infrared Hemispherical Emissivity + 0.84, !- Back Side Infrared Hemispherical Emissivity + 0.9; !- Conductivity {W/m-K} + + WindowMaterial:Glazing, + GREY 6MM, !- Name + SpectralAverage, !- Optical Data Type + , !- Window Glass Spectral Data Set Name + 0.006, !- Thickness {m} + 0.455, !- Solar Transmittance at Normal Incidence + 0.053, !- Front Side Solar Reflectance at Normal Incidence + 0.053, !- Back Side Solar Reflectance at Normal Incidence + 0.431, !- Visible Transmittance at Normal Incidence + 0.052, !- Front Side Visible Reflectance at Normal Incidence + 0.052, !- Back Side Visible Reflectance at Normal Incidence + 0.0, !- Infrared Transmittance at Normal Incidence + 0.84, !- Front Side Infrared Hemispherical Emissivity + 0.84, !- Back Side Infrared Hemispherical Emissivity + 0.9; !- Conductivity {W/m-K} + + WindowMaterial:Glazing, + LoE CLEAR 6MM, !- Name + SpectralAverage, !- Optical Data Type + , !- Window Glass Spectral Data Set Name + 0.006, !- Thickness {m} + 0.600, !- Solar Transmittance at Normal Incidence + 0.170, !- Front Side Solar Reflectance at Normal Incidence + 0.220, !- Back Side Solar Reflectance at Normal Incidence + 0.840, !- Visible Transmittance at Normal Incidence + 0.055, !- Front Side Visible Reflectance at Normal Incidence + 0.078, !- Back Side Visible Reflectance at Normal Incidence + 0.0, !- Infrared Transmittance at Normal Incidence + 0.84, !- Front Side Infrared Hemispherical Emissivity + 0.10, !- Back Side Infrared Hemispherical Emissivity + 0.9; !- Conductivity {W/m-K} + + WindowMaterial:Glazing, + GREY 3MM, !- Name + SpectralAverage, !- Optical Data Type + , !- Window Glass Spectral Data Set Name + .003, !- Thickness {m} + .626, !- Solar Transmittance at Normal Incidence + .061, !- Front Side Solar Reflectance at Normal Incidence + .061, !- Back Side Solar Reflectance at Normal Incidence + .611, !- Visible Transmittance at Normal Incidence + .061, !- Front Side Visible Reflectance at Normal Incidence + .061, !- Back Side Visible Reflectance at Normal Incidence + .0, !- Infrared Transmittance at Normal Incidence + .84, !- Front Side Infrared Hemispherical Emissivity + .84, !- Back Side Infrared Hemispherical Emissivity + .9; !- Conductivity {W/m-K} + +WindowMaterial:Glazing,LoE TINT 6MM,SpectralAverage, ,.006,.360,.093,.200,.500,.035,.054,.0,.84,.10,.9; ! ID 451 +WindowMaterial:Glazing,REF B TINT HI 6MM,SpectralAverage, ,.006,.150,.090,.330,.180,.080,.280,.0,.84,.60,.9; ! ID 232 +WindowMaterial:Glazing,REF C CLEAR MID 6MM,SpectralAverage, ,.006,.170,.200,.420,.190,.210,.380,.0,.84,.51,.9; ! ID 241 + +WindowMaterial:Glazing,REF D TINT 6MM,SpectralAverage, ,.006,.300,.140,.360,.250,.180,.450,.0,.84,.82,.9; ! ID 270 +WindowMaterial:Glazing,COATED POLY-77,SpectralAverage, ,.00051,.504,.402,.398,.766,.147,.167,.0,.075,.720,.14; ! ID 601 +WindowMaterial:Glazing,LoE SPEC SEL TINT 6MM,SpectralAverage, ,.006,.260,.140,.410,.460,.060,.040,.0,.84,.03,.9; ! ID 550 + +WindowMaterial:Glazing,PYR B CLEAR 6MM,SpectralAverage, ,.006,.680,.090,.100,.810,.110,.120,.0,.84,.20,.9; ! ID 351 + +WindowMaterial:Glazing,CLEAR 3MM,SpectralAverage, ,.003,.837,.075,.075,.898,.081,.081,.0,.84,.84,.9; ! ID 2 + +WindowMaterial:Glazing,REF B CLEAR LO 6MM,SpectralAverage, ,.006,.150,.220,.380,.200,.230,.330,.0,.84,.58,.9; ! ID 220 +WindowMaterial:Glazing,REF A CLEAR LO 6MM,SpectralAverage, ,.006,.066,.341,.493,.080,.410,.370,.0,.84,.40,.9; ! ID 200 +WindowMaterial:Glazing,GREEN 3MM,SpectralAverage, ,.003,.635,.063,.063,.822,.075,.075,.0,.84,.84,.9; ! ID 11 +WindowMaterial:Glazing,ECABS-2 COLORED 6MM,SpectralAverage, ,.006,.111,.179,.179,.128,.081,.081,.0,.84,.10,.9; ! ID 705 +WindowMaterial:Glazing,COATED POLY-55,SpectralAverage, ,.00051,.320,.582,.593,.551,.336,.375,.0,.046,.720,.14; ! ID 603 +WindowMaterial:Glazing,ECREF-2 COLORED 6MM,SpectralAverage, ,.006,.099,.219,.219,.155,.073,.073,.0,.84,.10,.9; ! ID 707 +WindowMaterial:Glazing,LoE SPEC SEL CLEAR 6MM Rev,SpectralAverage,,.006,.430,.420,.300,.770,.060,.070,.0,.03,.84,.9; ! +WindowMaterial:Glazing,BRONZE 6MM,SpectralAverage, ,.006,.482,.054,.054,.534,.057,.057,.0,.84,.84,.9; ! ID 6 +WindowMaterial:Glazing,REF A TINT MID 6MM,SpectralAverage, ,.006,.060,.130,.420,.090,.140,.350,.0,.84,.47,.9; ! ID 211 + + +WindowMaterial:Glazing, + Theoretical Glass 297, !- Name + SpectralAverage, !- Optical Data Type + , !- Window Glass Spectral Data Set Name + 0.003, !- Thickness {m} + 0.375039, !- Solar Transmittance at Normal Incidence + 0.574961, !- Front Side Solar Reflectance at Normal Incidence + 0.574961, !- Back Side Solar Reflectance at Normal Incidence + 0.529698, !- Visible Transmittance at Normal Incidence + 0.420302, !- Front Side Visible Reflectance at Normal Incidence + 0.420302, !- Back Side Visible Reflectance at Normal Incidence + 0, !- Infrared Transmittance at Normal Incidence + 0.9, !- Front Side Infrared Hemispherical Emissivity + 0.9, !- Back Side Infrared Hemispherical Emissivity + 0.0103561; !- Conductivity {W/m-K} + +WindowMaterial:Glazing, + Theoretical Glass 347, !- Name + SpectralAverage, !- Optical Data Type + , !- Window Glass Spectral Data Set Name + 0.003, !- Thickness {m} + 0.315861, !- Solar Transmittance at Normal Incidence + 0.634139, !- Front Side Solar Reflectance at Normal Incidence + 0.634139, !- Back Side Solar Reflectance at Normal Incidence + 0.479911, !- Visible Transmittance at Normal Incidence + 0.470089, !- Front Side Visible Reflectance at Normal Incidence + 0.470089, !- Back Side Visible Reflectance at Normal Incidence + 0, !- Infrared Transmittance at Normal Incidence + 0.9, !- Front Side Infrared Hemispherical Emissivity + 0.9, !- Back Side Infrared Hemispherical Emissivity + 0.010358; !- Conductivity {W/m-K} + +! +! Next two glazing layers are from IGDB double glazing database from Charlie Curcija (LBNL). +! The first layer is ID 3600, Neutral34gn5.grm. Followed by clear 3 mm glass. +! This double glazing has been added for 90.1-2016 to meet the sit-down restaurant +! SHGC requirement. Layers are used in construction Window_U_0.45_SHGC_0.27 +! + +WindowMaterial:Glazing, +Glass_12116_LayerAvg, !- Layer name : Neutral34gn5.grm +SpectralAverage, !- Optical Data Type +, !- Spectral Data name +0.004750, !- Thickness +0.171874, !- Solar Transmittance +1.094601e-001, !- Solar Front Reflectance +2.199938e-001, !- Solar Back Reflectance +0.322771, !- Visible Transmittance +0.182598, !-Visible Front Reflectance +0.081654, !-Visible Back reflectance +0.000000, !- IR Transmittance +0.840000, !-Front Emissivity +0.538265, !-Back Emissivity +1.000345; !-Conductivity + + +WindowMaterial:Glazing, +Glass_102_LayerAvg, !- Layer name : CLEAR_3.DAT +SpectralAverage, !- Optical Data Type +, !- Spectral Data name +0.003048, !- Thickness +0.833848, !- Solar Transmittance +7.476376e-002, !- Solar Front Reflectance +7.485449e-002, !- Solar Back Reflectance +0.899260, !- Visible Transmittance +0.082563, !-Visible Front Reflectance +0.082564, !-Visible Back reflectance +0.000000, !- IR Transmittance +0.840000, !-Front Emissivity +0.840000, !-Back Emissivity +1.000000; !-Conductivity + + +!- =========== ALL OBJECTS IN CLASS: MATERIAL:WINDOWGAS =========== + + WindowMaterial:Gas, + AIR 6MM, !- Name + Air, !- Gas Type + 0.0063; !- Thickness {m} + + WindowMaterial:Gas, + AIR 13MM, !- Name + Air, !- Gas Type + 0.0127; !- Thickness {m} + + WindowMaterial:Gas, + ARGON 13MM, !- Name + Argon, !- Gas Type + 0.0127; !- Thickness {m} + +!- =========== ALL OBJECTS IN CLASS: CONSTRUCTION =========== +! Sgl Green 6mm, !- Name + + Construction, + Window_U_1.22_SHGC_0.61, !- Name + GREEN 6MM; !- Outside Layer + +! Sgl Ref-B-H Clr 6mm, !- Name + + Construction, + Window_U_1.22_SHGC_0.39, !- Name + REF B CLEAR HI 6MM; !- Outside Layer + +! Sgl Ref-C-H Clr 6mm, !- Name + + Construction, + Window_U_1.22_SHGC_0.34, !- Name + REF C CLEAR HI 6MM; !- Outside Layer + +! Sgl Elec Ref Colored 6mm,!- Name + + Construction, + Window_U_1.22_SHGC_0.25, !- Name + ECREF-1 COLORED 6MM; !- Outside Layer + +! Sgl Ref-B-M Tint 6mm, !- Name + + Construction, + Window_U_0.72_SHGC_0.25, !- Name + REF B TINT MID 6MM; !- Outside Layer + +! Dbl Ref-D Clr 6mm/6mm Air, !- Name + + Construction, + Window_U_0.62_SHGC_0.39, !- Name + REF D CLEAR 6MM, !- Outside Layer + AIR 6MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl Ref-D Clr 6mm/6mm Air, !- Name + + Construction, + Window_U_0.57_SHGC_0.39, !- Name + REF D CLEAR 6MM, !- Outside Layer + AIR 6MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl Ref-C-H Clr 6mm/6mm Air, !- Name + + Construction, + Window_U_0.65_SHGC_0.25, !- Name + REF C CLEAR HI 6MM, !- Outside Layer + AIR 6MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl Ref-C-H Clr 6mm/6mm Air, !- Name + + Construction, + Window_U_0.62_SHGC_0.25, !- Name + REF C CLEAR HI 6MM, !- Outside Layer + AIR 6MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl Ref-C-H Clr 6mm/6mm Air, !- Name + + Construction, + Window_U_0.57_SHGC_0.25, !- Name + REF C CLEAR HI 6MM, !- Outside Layer + AIR 6MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl Blue 6mm/6mm Air, !- Name + + Construction, + Window_U_0.62_SHGC_0.49, !- Name + BLUE 6MM, !- Outside Layer + AIR 6MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl Blue 6mm/6mm Air, !- Name + + Construction, + Window_U_0.57_SHGC_0.49, !- Name + BLUE 6MM, !- Outside Layer + AIR 6MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl Ref-D Clr 6mm/13mm Air, !- Name + + Construction, + Window_U_0.52_SHGC_0.40, !- Name + REF D CLEAR 6MM, !- Outside Layer + AIR 13MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl Ref-D Clr 6mm/13mm Air, !- Name + + Construction, + Window_U_0.48_SHGC_0.40, !- Name + REF D CLEAR 6MM, !- Outside Layer + AIR 13MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl Ref-D Clr 6mm/13mm Arg, !- Name + + Construction, + Window_U_0.42_SHGC_0.45, !- Name + REF D CLEAR 6MM, !- Outside Layer + ARGON 13MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl Grey 6mm/13mm Air, !- Name + + Construction, + Window_U_0.46_SHGC_0.45, !- Name + GREY 6MM, !- Outside Layer + AIR 13MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl LoE (e2=.1) Tint 6mm/6mm Air, !- Name + + Construction, + Window_U_0.42_SHGC_0.40, !- Name + LoE TINT 6MM, !- Outside Layer + AIR 6MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl Ref-B-H Clr 6mm/13mm Air, !- Name + +Construction, + Window_U_0.43_SHGC_0.26, !- Name + REF B CLEAR HI 6MM, !- Outside Layer + AIR 13MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl Ref-B-H Clr 6mm/13mm Air, !- Name + +Construction, + Window_U_0.44_SHGC_0.26, !- Name + REF B CLEAR HI 6MM, !- Outside Layer + AIR 13MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl LoE (e2=.1) Tint 6mm/6mm Air, !- Name + +Construction, + Window_U_0.42_SHGC_0.35, !- Name + LoE TINT 6MM, !- Outside Layer + AIR 6MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl LoE (e2=.1) Tint 6mm/13mm Air, !- Name + +Construction, + Window_U_0.33_SHGC_0.40, !- Name + LoE TINT 6MM, !- Outside Layer + AIR 13MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +Construction, + Window_U_0.34_SHGC_0.40, !- Name + LoE TINT 6MM, !- Outside Layer + AIR 13MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl LoE (e2=.1) Tint 6mm/13mm Air, !- Name + +Construction, + Window_U_0.35_SHGC_0.35, !- Name + LoE TINT 6MM, !- Outside Layer + AIR 13MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl Ref-D Tint 6mm/6mm Air, !- Name + +Construction, + Window_U_0.55_SHGC_0.31, !- Name + REF D TINT 6MM, !- Outside Layer + AIR 6MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl LoE Spec Sel Tint 6mm/6mm Air, !- Name + +Construction, + Window_U_0.43_SHGC_0.29, !- Name + LoE SPEC SEL TINT 6MM, !- Outside Layer + AIR 6MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl LoE (e2=.2) Clr 6mm/13mm Air, !- Name + +Construction, + Window_U_0.34_SHGC_0.45, !- Name + PYR B CLEAR 6MM, !- Outside Layer + AIR 13MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl Ref-D Tint 6mm/6mm Air, !- Name + +Construction, + Window_U_0.56_SHGC_0.35, !- Name + REF D TINT 6MM, !- Outside Layer + AIR 6MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl Ref-B-H Clr 6mm/13mm Air, !- Name (0.44/0.30) + +Construction, + Window_U_0.45_SHGC_0.31, !- Name + REF B CLEAR HI 6MM, !- Outside Layer + AIR 13MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Trp LoE Film (77) Clr 3mm/6mm Air, !- Name (0.31/0.46) + +Construction, + Window_U_0.33_SHGC_0.45, !- Name + CLEAR 3MM, !- Outside Layer + AIR 6MM, !- Layer 2 + COATED POLY-77, !- Layer 3 + AIR 6MM, !- Layer 4 + CLEAR 3MM; !- Layer 5 + +! Dbl Ref B-H Tint 6mm/13mm Arg, ! U=2.297 SC= .27 SHGC=.236 TSOL=.119 TVIS=.163 + +Construction, + Window_U_0.38_SHGC_0.26, !- Name + REF B TINT HI 6MM, + ARGON 13MM, + CLEAR 6MM; + +! Dbl LoE (e2=.1) Tint 6mm/13mm Arg, ! U=1.502 SC= .43 SHGC=.371 TSOL=.284 TVIS=.444 + +Construction, + Window_U_0.25_SHGC_0.40, !- Name + LoE TINT 6MM, + ARGON 13MM, + CLEAR 6MM; + +! Dbl Ref-C-M Clr 6mm/13mm Arg, ! U=2.184 SC= .27 SHGC=.233 TSOL=.136 TVIS=.173 + +Construction, + Window_U_0.35_SHGC_0.26, !- Name + REF C CLEAR MID 6MM, + ARGON 13MM, + CLEAR 6MM; + + +! Dbl Ref-C-H Clr 6mm/6mm Air, !- Name + +Construction, + Window_U_0.54_SHGC_0.27, !- Name + REF C CLEAR HI 6MM, !- Outside Layer + AIR 6MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl Ref-A-M Tint 6mm/6mm Air, !- Name + +Construction, + Window_U_0.54_SHGC_0.18, !- Name + REF A TINT MID 6MM, !- Outside Layer + AIR 6MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl Ref-A-L Clr 6mm/13mm Air, !- Name + +Construction, + Window_U_0.54_SHGC_0.13, !- Name + REF A CLEAR LO 6MM, !- Outside Layer + AIR 13MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl LoE Elec Ref Colored 6mm/13mm Air, !- Name + +Construction, + Window_U_0.33_SHGC_0.11, !- Name + ECREF-2 COLORED 6MM, !- Outside Layer + AIR 13MM, !- Layer 2 + LoE SPEC SEL CLEAR 6MM Rev; !- Layer 3 + +! Trp LoE Film (55) Bronze 6mm/6mm Air, !- Name + +Construction, + Window_U_0.29_SHGC_0.22, !- Name + BRONZE 6MM, !- Outside Layer + AIR 6MM, !- Layer 2 + COATED POLY-55, !- Layer 3 + AIR 6MM, !- Layer 4 + CLEAR 6MM; !- Layer 5 + +! Dbl Elec Abs Colored 6mm/13mm Air, !- Name + +Construction, + Window_U_0.29_SHGC_0.17, !- Name + ECABS-2 COLORED 6MM, !- Outside Layer + AIR 13MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl LoE Elec Ref Colored 6mm/13mm Air, !- Name + +Construction, + Window_U_0.29_SHGC_0.11, !- Name + ECREF-2 COLORED 6MM, !- Outside Layer + AIR 13MM, !- Layer 2 + LoE SPEC SEL CLEAR 6MM Rev; !- Layer 3 + + +! Dbl LoE Spec Sel Tint 6mm/13mm Arg, !- Name + +Construction, + Window_U_0.24_SHGC_0.23, !- Name + LoE SPEC SEL TINT 6MM, !- Outside Layer + ARGON 13MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl Elec Abs Colored 6mm/13mm Arg, !- Name + +Construction, + Window_U_0.24_SHGC_0.16, !- Name + ECABS-2 COLORED 6MM, !- Outside Layer + ARGON 13MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + + +! Dbl LoE Elec Abs Colored 6mm/13mm Arg, !- Name + +Construction, + Window_U_0.24_SHGC_0.11, !- Name + ECABS-2 COLORED 6MM, !- Outside Layer + ARGON 13MM, !- Layer 2 + LoE SPEC SEL CLEAR 6MM Rev; !- Layer 3 + + +! Trp LoE Film (55) Bronze 6mm/13mm Air, !- Name + +Construction, + Window_U_0.19_SHGC_0.20, !- Name + BRONZE 6MM, !- Outside Layer + AIR 13MM, !- Layer 2 + COATED POLY-55, !- Layer 3 + AIR 13MM, !- Layer 4 + CLEAR 6MM; !- Layer 5 + + +! +! +! Following constructions are added as part of Addendum bb +! +! + +! Dbl Ref-C-H Clr 6mm/6mm Air + +Construction, + Window_U_0.71_SHGC_0.25, !- Name + REF C CLEAR HI 6MM, !- Outside Layer + AIR 6MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + + +! Dbl Ref-B-H Clr 6mm/13mm Arg + +Construction, + Window_U_0.38_SHGC_0.30, !- Name + REF B CLEAR HI 6MM, !- Outside Layer + ARGON 13MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + + +! Dbl LoE Spec Sel Tint 6mm/6mm Air + +Construction, + Window_U_0.36_SHGC_0.35, !- Name + LoE SPEC SEL TINT 6MM, !- Outside Layer + AIR 6MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + + +! Dbl LoE (e2=.1) Tint 6mm/13mm Air + +Construction, + Window_U_0.30_SHGC_0.40, !- Name + LoE TINT 6MM, !- Outside Layer + AIR 13MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + + +! +! +! End set of new bb constructions +! +! + +! +! Construction below added for 90.1-2016 Sit-down Restaurant to comply +! with SHGC requirements imposed by fenestration orientation. +! 1-6-16. +! + + + +CONSTRUCTION, +Window_U_0.45_SHGC_0.27, !- Glazing System name: Neutral34gn5.grm +Glass_12116_LayerAvg, !- glass name : Neutral34gn5.grm +Air 13MM, !- gap name - Air +Glass_102_LayerAvg; !- glass name : CLEAR_3.DAT + + +! +! End +! + +! +! Construction below added for 90.1-2016 Fastfood Restaurant to comply +! with SHGC requirements imposed by fenestration orientation. +! 1-6-16. +! + +! Dbl LoE (e2=.1) Tint 6mm/6mm Air, !- Name + +Construction, + Window_U_0.39_SHGC_0.36, !- Name + LoE TINT 6MM, !- Outside Layer + AIR 6MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + + +!=================skylight==================== + +! Sgl Ref-B-H Clr 6mm, !- Name + + Construction, + Window_U_1.98_SHGC_0.36, !- Name + REF B CLEAR HI 6MM; !- Outside Layer + +! Sgl Ref-B-H Clr 6mm, !- Name + + Construction, + Window_U_1.17_SHGC_0.39, !- Name + REF B CLEAR HI 6MM; !- Outside Layer + +! Sgl Green 6mm, !- Name + + Construction, + Window_U_1.98_SHGC_0.61, !- Name + GREEN 6MM; !- Outside Layer + +! Sgl Ref-D Clr 6mm, !- Name + + Construction, + Window_U_1.17_SHGC_0.49, !- Name + REF D CLEAR 6MM; !- Outside Layer + +! Sgl Green 3mm, !- Name + + Construction, + Window_U_1.17_SHGC_0.68, !- Name + GREEN 3MM; !- Outside Layer + +! Sgl Ref-B-H Clr 6mm, !- Name + + Construction, + Window_U_0.98_SHGC_0.45, !- Name + REF B CLEAR HI 6MM; !- Outside Layer + +! Sgl Ref-B-H Clr 6mm, !- Name + + Construction, + Window_U_0.98_SHGC_0.68, !- Name + REF B CLEAR HI 6MM; !- Outside Layer + +! Sgl Ref-A-L Clr 6mm, !- Name + + Construction, + Window_U_0.88_SHGC_0.16, !- Name + REF A CLEAR LO 6MM; !- Outside Layer + +! Sgl Elec Ref Colored 6mm,!- Name + + Construction, + Window_U_0.88_SHGC_0.27, !- Name + ECREF-1 COLORED 6MM; !- Outside Layer + +! Dbl Ref-B-L Clr 6mm/6mm Air, !- Name + + Construction, + Window_U_0.52_SHGC_0.22, !- Name + REF B CLEAR LO 6MM, !- Outside Layer + AIR 6MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +! Dbl Ref-B-H Tint 6mm/13mm Air, !- Name + + Construction, + Window_U_0.44_SHGC_0.20, !- Name + REF B TINT HI 6MM, !- Outside Layer + AIR 13MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + + +Construction, + Window_U_0.39_SHGC_0.38, !- Name + Theoretical Glass 297; !- Outside Layer + +Construction, + Window_U_0.39_SHGC_0.32, !- Name + Theoretical Glass 347; !- Outside Layer + +!=================Additional Skylight Constructions for 189.1==================== + +! Sgl LoE (e2=.2) Clr 6mm, !- Name + +Construction, + Window_U_0.75_SHGC_0.72, !- Name + PYR B CLEAR 6MM; !- Outside Layer + +! Sgl LoE (e2=.2) Clr 3mm, !- Name + +Construction, + Window_U_0.67_SHGC_0.77, !- Name + PYR B CLEAR 3MM; !- Outside Layer + +! Dbl Clr 3mm/6mm Air, !- Name + +Construction, + Window_U_0.56_SHGC_0.76, !- Name + CLEAR 3MM, !- Outside Layer + AIR 6MM, !- Layer 2 + CLEAR 3MM; !- Layer 3 + +WindowMaterial:Glazing,PYR B CLEAR 3MM,SpectralAverage, ,.003,.740,.090,.100,.820,.110,.120,.0,.84,.20,.9; ! ID 350 + + +!=================Additional Window Constructions for 189.1==================== + +! Dbl LoE Spec Sel Clr 3mm/6mm/6mm Air, !- Name + +Construction, + Window_U_0.40_SHGC_0.43, !- Name + LoE SPEC SEL CLEAR 3MM, !- Outside Layer + AIR 6MM, !- Layer 2 + CLEAR 6MM; !- Layer 3 + +WindowMaterial:Glazing,LoE SPEC SEL CLEAR 3MM,SpectralAverage, ,.003,.450,.340,.370,.780,.070,.060,.0,.84,.03,.9; ! ID 500 + +!=================Additional Window Materials and Constructions for 50% Concept==================== + + +WindowMaterial:Glazing,ECABS-2 BLEACHED 6MM,SpectralAverage, ,.006,.814,.086,.086,.847,.099,.099,.0,.84,.10,.9; ! ID 704 + +! Dbl LoE Elec Abs Bleached 6mm/6mm Air, !- Name + +Construction, + Window_U_0.40_SHGC_0.45, !- Name + ECABS-2 BLEACHED 6MM, !- Outside Layer + AIR 6MM, !- Layer 2 + LoE SPEC SEL CLEAR 6MM Rev; !- Layer 3 + +! +! The next four constructions are derived from Window 6.3. +! Refer to the scorecard for individual layers' definitions. +! + +WindowMaterial:Glazing, +Glass_2175_LayerAvg, !- Layer name : GREY-SGP-E366 - 8.6.CIG +SpectralAverage, !- Optical Data Type +, !- Spectral Data name +0.008600, !- Thickness +0.167758, !- Solar Transmittance +2.176064e-001, !- Solar Front Reflectance +4.379779e-001, !- Solar Back Reflectance +0.416044, !- Visible Transmittance +0.078729, !-Visible Front Reflectance +0.106540, !-Visible Back reflectance +0.000000, !- IR Transmittance +0.840000, !-Front Emissivity +0.840000, !-Back Emissivity +1; !-Conductivity + + +WindowMaterial:Glazing, +Glass_2022F_LayerAvg, !- Layer name : LoE262-4.CIG +SpectralAverage, !- Optical Data Type +, !- Spectral Data name +0.003900, !- Thickness +0.355897, !- Solar Transmittance +3.940945e-001, !- Solar Front Reflectance +2.656452e-001, !- Solar Back Reflectance +0.677694, !- Visible Transmittance +0.042734, !- Visible Front Reflectance +0.055470, !- Visible Back reflectance +0.000000, !- IR Transmittance +0.046000, !-Front Emissivity +0.840000, !-Back Emissivity +1; !-Conductivity + +WindowMaterial:Glazing, +Glass_2052_LayerAvg, !- Layer name : 86SGP-G.CIG +SpectralAverage, !- Optical Data Type +, !- Spectral Data name +0.008370, !- Thickness +0.507767, !- Solar Transmittance +5.422805e-002, !- Solar Front Reflectance +5.449309e-002, !- Solar Back Reflectance +0.586833, !- Visible Transmittance +0.058050, !-Visible Front Reflectance +0.058397, !-Visible Back reflectance +0.000000, !- IR Transmittance +0.840000, !-Front Emissivity +0.840000, !-Back Emissivity +1; !-Conductivity + + +WindowMaterial:Glazing, +Glass_2010F_LayerAvg, !- Layer name : LoE272-2.CIG +SpectralAverage, !- Optical Data Type +, !- Spectral Data name +0.002210, !- Thickness +0.434294, !- Solar Transmittance +4.183747e-001, !- Solar Front Reflectance +3.410654e-001, !- Solar Back Reflectance +0.797579, !- Visible Transmittance +0.043577, !- Visible Front Reflectance +0.056031, !- Visible Back reflectance +0.000000, !- IR Transmittance +0.042274, !-Front Emissivity +0.840000, !-Back Emissivity +1; !-Conductivity + +WindowMaterial:Glazing, +Glass_2027F_LayerAvg, !- Layer name : LoE270-4.CIG +SpectralAverage, !- Optical Data Type +, !- Spectral Data name +0.004000, !- Thickness +0.369744, !- Solar Transmittance +4.700695e-001, !- Solar Front Reflectance +3.409350e-001, !- Solar Back Reflectance +0.765222, !- Visible Transmittance +0.054600, !- Visible Front Reflectance +0.073741, !- Visible Back reflectance +0.000000, !- IR Transmittance +0.036750, !-Front Emissivity +0.840000, !-Back Emissivity +1; !-Conductivity + + +WindowMaterial:Gas, +Gap_1_W_0_0025, !- gap name - Air +Air, !- type +0.0025; !- thickness + +WindowMaterial:Gas, +Gap_1_W_0_0032, !- gap name - Air +Air, !- type +0.0032; !- thickness + +WindowMaterial:Gas, +Gap_1_W_0_0042, !- gap name - Air +Air, !- type +0.0042; !- thickness + +WindowMaterial:Gas, +Gap_1_W_0_0043, !- gap name - Air +Air, !- type +0.0043; !- thickness + +WindowMaterial:Gas, +Gap_1_W_0_0018, !- gap name - Air +Air, !- type +0.0018; !- thickness + +WindowMaterial:Gas, +Gap_1_W_0_0024, !- gap name - Air +Air, !- type +0.0024; !- thickness + +WindowMaterial:Gas, +Gap_1_W_0_0038, !- gap name - Air +Air, !- type +0.0038; !- thickness + + + +Construction, + Window_U_0.60_SHGC_0.25, !- Name + Glass_2175_LayerAvg, !- glass name : GREY-SGP-E366 - 8.6.CIG + Gap_1_W_0_0025, !- gap name - Air + Glass_2022F_LayerAvg; !- glass name : LoE262-4.CIG + + +Construction, + Window_U_0.55_SHGC_0.25, !- Name + Glass_2175_LayerAvg, !- glass name : GREY-SGP-E366 - 8.6.CIG + Gap_1_W_0_0032, !- gap name - Air + Glass_2022F_LayerAvg; !- glass name : LoE262-4.CIG + + +Construction, + Window_U_0.50_SHGC_0.25, !- Name + Glass_2175_LayerAvg, !- glass name : GREY-SGP-E366 - 8.6.CIG + Gap_1_W_0_0042, !- gap name - Air + Glass_2022F_LayerAvg; !- glass name : LoE262-4.CIG + + +Construction, + Window_U_0.47_SHGC_0.40, !- Name + Glass_2052_LayerAvg, !- glass name : 86SGP-G.CIG + Gap_1_W_0_0043, !- gap name - Air + Glass_2010F_LayerAvg; !- glass name : LoE272-2.CIG + + + + + +!=================Additional Skylight Materials and Constructions for 50% Concept==================== + +! +! The next four constructions are derived from Window 6.3. +! Refer to the scorecard for individual layers. +! + + +Construction, + Window_U_0.75_SHGC_0.35, !- Name + Glass_2052_LayerAvg, !- glass name : 86SGP-G.CIG + Gap_1_W_0_0018, !- gap name - Air + Glass_2027F_LayerAvg; !- glass name : LoE270-4.CIG + + +Construction, + Window_U_0.65_SHGC_0.35, !- Name + Glass_2052_LayerAvg, !- glass name : 86SGP-G.CIG + Gap_1_W_0_0024, !- gap name - Air + Glass_2027F_LayerAvg; !- glass name : LoE270-4.CIG + + +Construction, + Window_U_0.55_SHGC_0.35, !- Name + Glass_2052_LayerAvg, !- glass name : 86SGP-G.CIG + Gap_1_W_0_0038, !- gap name - Air + Glass_2027F_LayerAvg; !- glass name : LoE270-4.CIG + + +Construction, + Window_U_0.50_SHGC_0.40, !- Name + Glass_2052_LayerAvg, !- glass name : 86SGP-G.CIG + Gap_1_W_0_0038, !- gap name - Air + Glass_2027F_LayerAvg; !- glass name : LoE270-4.CIG + +!=================Additional Windows for IECC Analysis================================================ + + +!Sgl Elec Ref Colored 6mm +Construction, + Window_U_1.16_SHGC_0.25, !- Name + ECREF-1 COLORED 6MM; !- glass name + +! Sgl Elec Ref Colored 6mm +Construction, + Window_U_1.08_SHGC_0.25, !- Name + ECREF-1 COLORED 6MM; !- glass name + +! Dbl Elec Ref Bleached 6mm/13mm Air, !- Name + +WindowMaterial:Glazing,ECREF-2 BLEACHED 6MM,SpectralAverage, ,.006,.694,.168,.168,.818,.110,.110,.0,.84,.10,.9; ! ID 706 + +Construction, + Window_U_0.29_SHGC_0.45, !- Name + ECREF-2 BLEACHED 6MM, !- Outside Layer + AIR 13MM, !- Layer 2 + LoE SPEC SEL CLEAR 6MM Rev; !- Layer 3 + + + +!=================Additional Skylights for IECC Analysis================================================ + +! Using Window_U_0.65_SHGC_0.35 and Window_U_0.75_SHGC_0.35 from 50% concepts. + +!Sgl Ref-B-H Clr 6mm, Add frame width and frame conductivity +! Glazing Properties- Assembly U factor = 0.89, SHGC = 0.4. This includes the effect of air films. +! Skylight frame has ben added with the following properties- +! Frame width = 0.7129; Frame conductivity = 283.91 + +Construction, + Window_U_1.60_SHGC_0.40, !- Name + REF B CLEAR HI 6MM; !- glass name + +! Sgl Ref-C-H Clr 6mm, Add frame width and frame conductivity +! Glazing Properties- Assembly U factor = 0.89, SHGC = 0.4. This includes the effect of air films. +! Skylight frame has ben added with the following properties- +! Frame width = 0.1271; Frame conductivity = 283.91 + +Construction, + Window_U_1.05_SHGC_0.40, !- Name + REF B CLEAR HI 6MM; !- glass name + +! Sgl Ref-C-H Clr 6mm, Add frame width and frame conductivity +! Same construction (Assembly U factor = 0.89, SHGC = 0.4) has been used with frame width = 0. +Construction, + Window_U_0.90_SHGC_0.40, !- Name + REF B CLEAR HI 6MM; !- glass name + + +! +! Sgl Ref-C-H Clr 6mm. IECC 2015 and IECC 2012 skylight construction +! +Construction, + Window_U_0.9_SHGC_0.6, !- Name + REF B CLEAR HI 6MM; !- glass name + +! +! Dbl Grey 3mm/6mm Air. IECC 2015 and IECC 2012 skylight construction +! + Construction, + Window_U_0.75_SHGC_0.6, !- Name + GREY 3MM, !- Outside Layer + AIR 6MM, !- Layer 2 + CLEAR 3MM; !- Layer 3 + +! +! Constructions added during addendum AI to 90.1-2013 +! + +! +! Sgl LoE (e2=.4) Clr 3mm +! + Construction, + Window_U_0.85_SHGC_0.78, !- Name + PYR A CLEAR 3MM; !- Outside Layer + + WindowMaterial:Glazing, + PYR A CLEAR 3MM, !- Name + SpectralAverage, !- Optical Data Type + , !- Window Glass Spectral Data Set Name + .003, !- Thickness {m} + .750, !- Solar Transmittance at Normal Incidence + .100, !- Front Side Solar Reflectance at Normal Incidence + .100, !- Back Side Solar Reflectance at Normal Incidence + .850, !- Visible Transmittance at Normal Incidence + .120, !- Front Side Visible Reflectance at Normal Incidence + .120, !- Back Side Visible Reflectance at Normal Incidence + .0, !- Infrared Transmittance at Normal Incidence + .84, !- Front Side Infrared Hemispherical Emissivity + .40, !- Back Side Infrared Hemispherical Emissivity + .9; !- Conductivity {W/m-K} + +! Sgl Green 3mm, !- Name + Construction, + Window_U_1.30_SHGC_0.68, !- Name + GREEN 3MM; !- Outside Layer + +! Sgl Green 3mm, !- Name + Construction, + Window_U_1.15_SHGC_0.68, !- Name + GREEN 3MM; !- Outside Layer + +! Sgl Ref-B-H Clr 6mm, !- Name + Construction, + Window_U_1.80_SHGC_0.36, !- Name + REF B CLEAR HI 6MM; !- Outside Layer + +! Sgl Ref-B-H Clr 6mm, !- Name + Construction, + Window_U_1.70_SHGC_0.36, !- Name + REF B CLEAR HI 6MM; !- Outside Layer + + +!-_____________________________________________________________________ +!- Added for Addendum AI to 90.1 2013 +!-_____________________________________________________________________ + +!---------------------------------------------------------------------- +! Window Gas Layers +!---------------------------------------------------------------------- + +WindowMaterial:Gas, +Gap_1_W_0_0127, !- gap name - Air +Air, !- type +0.0127; !- thickness + +WindowMaterial:GasMixture, +Gap_9_W_0_0127, !- gap name Air (10) / Argon (90) mix +0.0127, !- thickness +2, !- Number of Gases in the mixture +Air, !- Gas Name +0.10, !- Fraction +Argon, !- Gas Name +0.90; !- Fraction + + + +WindowMaterial:Gas, +Gap_1_W_0_0090, !- gap name - Air +Air, !- type +0.0090; !- thickness + +WindowMaterial:Gas, +Gap_1_W_0_0070, !- gap name - Air +Air, !- type +0.0070; !- thickness + +WindowMaterial:Gas, +Gap_1_W_0_0060, !- gap name - Air +Air, !- type +0.0060; !- thickness + +WindowMaterial:Gas, +Gap_1_W_0_0052, !- gap name - Air +Air, !- type +0.0052; !- thickness + + + +WindowMaterial:Gas, +Gap_1_W_0_0048, !- gap name - Air +Air, !- type +0.0048; !- thickness + +WindowMaterial:Gas, +Gap_1_W_0_0046, !- gap name - Air +Air, !- type +0.0046; !- thickness + + +!----------------------------------------------------- +! Window Glass Layers +!----------------------------------------------------- + +WindowMaterial:Glazing, +Glass_4321_LayerAvg, !- Layer name : Stratobel Sunergy 33.1 green.gvb (Window_U_0.37_SHGC_0.45) +SpectralAverage, !- Optical Data Type +, !- Spectral Data name +0.006180, !- Thickness +0.425947, !- Solar Transmittance +7.424190e-002, !- Solar Front Reflectance +9.994167e-002, !- Solar Back Reflectance +0.559652, !- Visible Transmittance +0.072726, !-Visible Front Reflectance +0.094819, !-Visible Back reflectance +0.000000, !- IR Transmittance +0.840000, !-Front Emissivity +0.279000, !-Back Emissivity +0.814000; !-Conductivity + + +WindowMaterial:Glazing, +Glass_8652_LayerAvg, !- Layer name : Low-E 50 CSR.MWF (Window_U_0.41_SHGC_0.38) +SpectralAverage, !- Optical Data Type +, !- Spectral Data name +0.003059, !- Thickness +0.343691, !- Solar Transmittance +2.989869e-001, !- Solar Front Reflectance +4.621051e-001, !- Solar Back Reflectance +0.487937, !- Visible Transmittance +0.209449, !-Visible Front Reflectance +0.306829, !-Visible Back reflectance +0.000000, !- IR Transmittance +0.840000, !-Front Emissivity +0.390000, !-Back Emissivity +0.962000; !-Conductivity + +WindowMaterial:Glazing, +Glass_282_LayerAvg, !- Layer name : SILAG50LE_3.bsf (Window_U_0.39_SHGC_0.40) +SpectralAverage, !- Optical Data Type +, !- Spectral Data name +0.003251, !- Thickness +0.352565, !- Solar Transmittance +2.956174e-001, !- Solar Front Reflectance +4.058073e-001, !- Solar Back Reflectance +0.510046, !- Visible Transmittance +0.237458, !-Visible Front Reflectance +0.270435, !-Visible Back reflectance +0.000000, !- IR Transmittance +0.840000, !-Front Emissivity +0.370000, !-Back Emissivity +0.940000; !-Conductivity + +WindowMaterial:Glazing, +Glass_2531_LayerAvg, !- Layer name : VE50 SR CDF.CPF (Window_U_0.41_SHGC_0.38) +SpectralAverage, !- Optical Data Type +, !- Spectral Data name +0.003060, !- Thickness +0.350556, !- Solar Transmittance +3.198325e-001, !- Solar Front Reflectance +3.617666e-001, !- Solar Back Reflectance +0.490923, !- Visible Transmittance +0.250840, !-Visible Front Reflectance +0.232929, !-Visible Back reflectance +0.000000, !- IR Transmittance +0.840000, !-Front Emissivity +0.454000, !-Back Emissivity +0.934000; !-Conductivity + +WindowMaterial:Glazing, +Glass_2532_LayerAvg, !- Layer name : V51 SR CDF.CPF (Window_U_0.45_SHGC_0.38) +SpectralAverage, !- Optical Data Type +, !- Spectral Data name +0.003060, !- Thickness +0.340824, !- Solar Transmittance +2.268281e-001, !- Solar Front Reflectance +2.732317e-001, !- Solar Back Reflectance +0.543814, !- Visible Transmittance +0.076600, !-Visible Front Reflectance +0.079448, !-Visible Back reflectance +0.000000, !- IR Transmittance +0.840000, !-Front Emissivity +0.676000, !-Back Emissivity +0.933000; !-Conductivity + + + +WindowMaterial:Glazing, +Glass_9731_LayerAvg, !- Layer name : 12XIRClr.VRD (Window_U_0.44_SHGC_0.40) +SpectralAverage, !- Optical Data Type +, !- Spectral Data name +0.012480, !- Thickness +0.369424, !- Solar Transmittance +2.079376e-001, !- Solar Front Reflectance +2.033990e-001, !- Solar Back Reflectance +0.710088, !- Visible Transmittance +0.071115, !-Visible Front Reflectance +0.070696, !-Visible Back reflectance +0.000000, !- IR Transmittance +0.840000, !-Front Emissivity +0.840000, !-Back Emissivity +0.815000; !-Conductivity + + +WindowMaterial:Glazing, +Glass_4313_LayerAvg, !- Layer name : sunergy azur 4.gvb (Window_U_0.38_SHGC_0.41) +SpectralAverage, !- Optical Data Type +, !- Spectral Data name +0.003850, !- Thickness +0.373486, !- Solar Transmittance +7.114256e-002, !- Solar Front Reflectance +9.944001e-002, !- Solar Back Reflectance +0.601300, !- Visible Transmittance +0.077225, !-Visible Front Reflectance +0.096992, !-Visible Back reflectance +0.000000, !- IR Transmittance +0.840000, !-Front Emissivity +0.298000, !-Back Emissivity +1.000000; !-Conductivity + +WindowMaterial:Glazing, +Glass_1576_LayerAvg, !- Layer name : Hopdrei.swt (Window_U_0.51_SHGC_0.25) +SpectralAverage, !- Optical Data Type +, !- Spectral Data name +0.003058, !- Thickness +0.167637, !- Solar Transmittance +3.034693e-001, !- Solar Front Reflectance +1.825558e-001, !- Solar Back Reflectance +0.341994, !- Visible Transmittance +0.128888, !-Visible Front Reflectance +0.128077, !-Visible Back reflectance +0.000000, !- IR Transmittance +0.840000, !-Front Emissivity +0.868000, !-Back Emissivity +0.846000; !-Conductivity +!----------------------------------------------------- +! Window Construction +!----------------------------------------------------- + +CONSTRUCTION, +Window_U_0.37_SHGC_0.45, !- Glazing System name: Stratobel Sunergy 33.1 green.gvb (GlzSys_1569) +Glass_4321_LayerAvg, !- glass name : Stratobel Sunergy 33.1 green.gvb +Gap_1_W_0_0127, !- gap name - Air +Glass_102_LayerAvg; !- glass name : CLEAR_3.DAT + +CONSTRUCTION, +Window_U_0.41_SHGC_0.38, !- Glazing System name: Low-E 50 CSR.MWF (GlzSys_2797) +Glass_8652_LayerAvg, !- glass name : Low-E 50 CSR.MWF +Gap_1_W_0_0127, !- gap name - Air +Glass_102_LayerAvg; !- glass name : CLEAR_3.DAT + +CONSTRUCTION, +Window_U_0.40_SHGC_0.4, !- Glazing System name: Low-E 50 CSR.MWF (GlzSys_2797) +Glass_8652_LayerAvg, !- glass name : Low-E 50 CSR.MWF +Gap_1_W_0_0127, !- gap name - Air +Glass_102_LayerAvg; !- glass name : CLEAR_3.DAT + +CONSTRUCTION, +Window_U_0.40_SHGC_0.38, !- Glazing System name: Low-E 50 CSR.MWF (GlzSys_2797) +Glass_8652_LayerAvg, !- glass name : Low-E 50 CSR.MWF +Gap_1_W_0_0127, !- gap name - Air +Glass_102_LayerAvg; !- glass name : CLEAR_3.DAT + +CONSTRUCTION, +Window_U_0.39_SHGC_0.40, !- Glazing System name: SILAG50LE_3.bsf (GlzSys_78) +Glass_282_LayerAvg, !- glass name : SILAG50LE_3.bsf +Gap_1_W_0_0127, !- gap name - Air +Glass_102_LayerAvg; !- glass name : CLEAR_3.DAT + +!- CONSTRUCTION, +!- Window_U_0.41_SHGC_0.38, !- Glazing System name: VE50 SR CDF.CPF (GlzSys_873) +!- Glass_2531_LayerAvg, !- glass name : VE50 SR CDF.CPF +!- Gap_1_W_0_0127, !- gap name - Air +!- Glass_102_LayerAvg; !- glass name : CLEAR_3.DAT + +!- CONSTRUCTION, +!- Window_U_0.40_SHGC_0.38, !- Glazing System name: SILAG50LE_3.bsf (GlzSys_78) +!- Glass_282_LayerAvg, !- glass name : SILAG50LE_3.bsf +!- Gap_1_W_0_0127, !- gap name - Air +!- Glass_102_LayerAvg; !- glass name : CLEAR_3.DAT + + +CONSTRUCTION, +Window_U_0.45_SHGC_0.38, !- Glazing System name: V51 SR CDF.CPF (GlzSys_874) +Glass_2532_LayerAvg, !- glass name : V51 SR CDF.CPF +Gap_1_W_0_0127, !- gap name - Air +Glass_102_LayerAvg; !- glass name : CLEAR_3.DAT + +CONSTRUCTION, +Window_U_0.44_SHGC_0.40, !- Glazing System name: 12XIRClr.VRD +Glass_9731_LayerAvg, !- glass name : 12XIRClr.VRD +Gap_9_W_0_0127, !- gap name - Air (10) / Argon (90) Mix +Glass_102_LayerAvg; !- glass name : CLEAR_3.DAT + +CONSTRUCTION, +Window_U_0.38_SHGC_0.36, !- Glazing System name: VE50 SR CDF.CPF +Glass_2531_LayerAvg, !- glass name : VE50 SR CDF.CPF +Gap_9_W_0_0127, !- gap name - Air (10) / Argon (90) Mix +Glass_102_LayerAvg; !- glass name : CLEAR_3.DAT + +!-_________________________________________________ +!- Created Using varying Air Film thickness +!-_________________________________________________ + +CONSTRUCTION, +Window_U_0.38_SHGC_0.41, !- Glazing System name: sunergy azur 4.gvb +Glass_4313_LayerAvg, !- glass name : sunergy azur 4.gvb +Gap_1_W_0_0127, !- gap name - Air +Glass_102_LayerAvg; !- glass name : CLEAR_3.DAT + + +CONSTRUCTION, +Window_U_0.51_SHGC_0.25, !- Glazing System name: Hopdrei.swt (GlzSys_419) +Glass_1576_LayerAvg, !- glass name : Hopdrei.swt +Gap_1_W_0_0090, !- gap name - Air +Glass_102_LayerAvg; !- glass name : CLEAR_3.DAT + + +CONSTRUCTION, +Window_U_0.54_SHGC_0.25, !- Glazing System name: Hopdrei.swt +Glass_1576_LayerAvg, !- glass name : Hopdrei.swt +Gap_1_W_0_0070, !- gap name - Air +Glass_102_LayerAvg; !- glass name : CLEAR_3.DAT + + + +CONSTRUCTION, +Window_U_0.56_SHGC_0.25, !- Glazing System name: Hopdrei.swt +Glass_1576_LayerAvg, !- glass name : Hopdrei.swt +Gap_1_W_0_0060, !- gap name - Air +Glass_102_LayerAvg; !- glass name : CLEAR_3.DAT + +CONSTRUCTION, +Window_U_0.59_SHGC_0.25, !- Glazing System name: Hopdrei.swt +Glass_1576_LayerAvg, !- glass name : Hopdrei.swt +Gap_1_W_0_0048, !- gap name - Air +Glass_102_LayerAvg; !- glass name : CLEAR_3.DAT + + + + +CONSTRUCTION, +Window_U_0.58_SHGC_0.25, !- Glazing System name: Hopdrei.swt +Glass_1576_LayerAvg, !- glass name : Hopdrei.swt +Gap_1_W_0_0052, !- gap name - Air +Glass_102_LayerAvg; !- glass name : CLEAR_3.DAT + + + + + + + +!- =========== ALL OBJECTS IN CLASS: ZONE =========== + + + Zone, + Basement, !- Name + 0.0000, !- Direction of Relative North {deg} + 0.0000, !- X Origin {m} + 0.0000, !- Y Origin {m} + 0.0000, !- Z Origin {m} + 1, !- Type + 1.0000, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + YES; !- Part of Total Floor Area + + + + Zone, + Core_bottom, !- Name + 0.0000, !- Direction of Relative North {deg} + 0.0000, !- X Origin {m} + 0.0000, !- Y Origin {m} + 0.0000, !- Z Origin {m} + 1, !- Type + 1.0000, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + YES; !- Part of Total Floor Area + + + + Zone, + Core_mid, !- Name + 0.0000, !- Direction of Relative North {deg} + 0.0000, !- X Origin {m} + 0.0000, !- Y Origin {m} + 0.0000, !- Z Origin {m} + 1, !- Type + 10.0000, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + YES; !- Part of Total Floor Area + + + + Zone, + Core_top, !- Name + 0.0000, !- Direction of Relative North {deg} + 0.0000, !- X Origin {m} + 0.0000, !- Y Origin {m} + 0.0000, !- Z Origin {m} + 1, !- Type + 1.0000, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + YES; !- Part of Total Floor Area + + + + Zone, + Perimeter_bot_ZN_3, !- Name + 0.0000, !- Direction of Relative North {deg} + 0.0000, !- X Origin {m} + 0.0000, !- Y Origin {m} + 0.0000, !- Z Origin {m} + 1, !- Type + 1.0000, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + YES; !- Part of Total Floor Area + + + + Zone, + Perimeter_bot_ZN_2, !- Name + 0.0000, !- Direction of Relative North {deg} + 0.0000, !- X Origin {m} + 0.0000, !- Y Origin {m} + 0.0000, !- Z Origin {m} + 1, !- Type + 1.0000, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + YES; !- Part of Total Floor Area + + + + Zone, + Perimeter_bot_ZN_1, !- Name + 0.0000, !- Direction of Relative North {deg} + 0.0000, !- X Origin {m} + 0.0000, !- Y Origin {m} + 0.0000, !- Z Origin {m} + 1, !- Type + 1.0000, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + YES; !- Part of Total Floor Area + + + + Zone, + Perimeter_bot_ZN_4, !- Name + 0.0000, !- Direction of Relative North {deg} + 0.0000, !- X Origin {m} + 0.0000, !- Y Origin {m} + 0.0000, !- Z Origin {m} + 1, !- Type + 1.0000, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + YES; !- Part of Total Floor Area + + + + Zone, + Perimeter_mid_ZN_3, !- Name + 0.0000, !- Direction of Relative North {deg} + 0.0000, !- X Origin {m} + 0.0000, !- Y Origin {m} + 0.0000, !- Z Origin {m} + 1, !- Type + 10.0000, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + YES; !- Part of Total Floor Area + + + + Zone, + Perimeter_mid_ZN_2, !- Name + 0.0000, !- Direction of Relative North {deg} + 0.0000, !- X Origin {m} + 0.0000, !- Y Origin {m} + 0.0000, !- Z Origin {m} + 1, !- Type + 10.0000, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + YES; !- Part of Total Floor Area + + + + Zone, + Perimeter_mid_ZN_1, !- Name + 0.0000, !- Direction of Relative North {deg} + 0.0000, !- X Origin {m} + 0.0000, !- Y Origin {m} + 0.0000, !- Z Origin {m} + 1, !- Type + 10.0000, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + YES; !- Part of Total Floor Area + + + + Zone, + Perimeter_mid_ZN_4, !- Name + 0.0000, !- Direction of Relative North {deg} + 0.0000, !- X Origin {m} + 0.0000, !- Y Origin {m} + 0.0000, !- Z Origin {m} + 1, !- Type + 10.0000, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + YES; !- Part of Total Floor Area + + + + Zone, + Perimeter_top_ZN_3, !- Name + 0.0000, !- Direction of Relative North {deg} + 0.0000, !- X Origin {m} + 0.0000, !- Y Origin {m} + 0.0000, !- Z Origin {m} + 1, !- Type + 1.0000, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + YES; !- Part of Total Floor Area + + + + Zone, + Perimeter_top_ZN_2, !- Name + 0.0000, !- Direction of Relative North {deg} + 0.0000, !- X Origin {m} + 0.0000, !- Y Origin {m} + 0.0000, !- Z Origin {m} + 1, !- Type + 1.0000, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + YES; !- Part of Total Floor Area + + + + Zone, + Perimeter_top_ZN_1, !- Name + 0.0000, !- Direction of Relative North {deg} + 0.0000, !- X Origin {m} + 0.0000, !- Y Origin {m} + 0.0000, !- Z Origin {m} + 1, !- Type + 1.0000, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + YES; !- Part of Total Floor Area + + + + Zone, + Perimeter_top_ZN_4, !- Name + 0.0000, !- Direction of Relative North {deg} + 0.0000, !- X Origin {m} + 0.0000, !- Y Origin {m} + 0.0000, !- Z Origin {m} + 1, !- Type + 1.0000, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + YES; !- Part of Total Floor Area + + + + Zone, + GroundFloor_Plenum, !- Name + 0.0, !- Direction of Relative North {deg} + 0.0, !- X Origin {m} + 0.0, !- Y Origin {m} + 0, !- Z Origin {m} + , !- Type + 1, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + No; !- Part of Total Floor Area + + + + Zone, + MidFloor_Plenum, !- Name + 0.0, !- Direction of Relative North {deg} + 0.0, !- X Origin {m} + 0.0, !- Y Origin {m} + 0, !- Z Origin {m} + , !- Type + 10, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + No; !- Part of Total Floor Area + + + + Zone, + TopFloor_Plenum, !- Name + 0.0, !- Direction of Relative North {deg} + 0.0, !- X Origin {m} + 0.0, !- Y Origin {m} + 0, !- Z Origin {m} + , !- Type + 1, !- Multiplier + autocalculate, !- Ceiling Height {m} + autocalculate, !- Volume {m3} + autocalculate, !- Floor Area {m2} + , !- Zone Inside Convection Algorithm + , !- Zone Outside Convection Algorithm + No; !- Part of Total Floor Area + +!- Adding Data Center Zones + + + Zone, + DataCenter_bot_ZN_6, !- Name + 0.0, !- Direction of Relative North {deg} + 5.4876, !- X Origin {m} + 44.165, !- Y Origin {m} + 0.0, !- Z Origin {m} + , !- Type + 1; !- Multiplier + + + + Zone, + DataCenter_mid_ZN_6, !- Name + 0.0, !- Direction of Relative North {deg} + 4.5732, !- X Origin {m} + 4.5732, !- Y Origin {m} + 16.7683, !- Z Origin {m} + , !- Type + 10; !- Multiplier + + + + Zone, + DataCenter_top_ZN_6, !- Name + 0.0, !- Direction of Relative North {deg} + 4.5732, !- X Origin {m} + 4.5732, !- Y Origin {m} + 33.5366, !- Z Origin {m} + , !- Type + 1; !- Multiplier + + + + Zone, + DataCenter_basement_ZN_6,!- Name + 0.0, !- Direction of Relative North {deg} + 16.0794, !- X Origin {m} + 0.0, !- Y Origin {m} + -2.439, !- Z Origin {m} + , !- Type + 1; !- Multiplier + +!- =========== ALL OBJECTS IN CLASS: SURFACEGEOMETRY =========== + + + GlobalGeometryRules, + ULC, !- Starting Vertex Position + CCW, !- Vertex Entry Direction + Relative; !- Coordinate System + +!- =========== ALL OBJECTS IN CLASS: SURFACE:HEATTRANSFER =========== + !- =========== ALL OBJECTS IN CLASS: BUILDINGSURFACE:DETAILED =========== + + + BuildingSurface:Detailed, + Basement_Wall_East, !- Name + Wall, !- Surface Type + basement_wall, !- Construction Name + Basement, !- Zone Name + OtherSideCoefficients, !- Outside Boundary Condition + surfPropOthSdCoefBasementAvgWall, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,0.000000000000,-2.439000000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,48.738100000000,-2.439000000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,48.738100000000,0.000000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_bot_ZN_2_Floor-PPAutoCreateOther, !- Name + Ceiling, !- Surface Type + int_slab_ceiling, !- Construction Name + Basement, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_bot_ZN_2_Floor,!- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,48.738100000000,0.000000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_bot_ZN_1_Floor-PPAutoCreateOther, !- Name + Ceiling, !- Surface Type + int_slab_ceiling, !- Construction Name + Basement, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_bot_ZN_1_Floor,!- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 16.079400000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 1 {m} + 16.079400000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,4.573200000000,0.000000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_bot_ZN_5_Ceiling, !- Name + Ceiling, !- Surface Type + DropCeiling, !- Construction Name + Core_bottom, !- Zone Name + Zone, !- Outside Boundary Condition + GroundFloor_Plenum, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 5.487600000000,44.165000000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 5.487600000000,4.573200000000,2.744000000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,4.573200000000,2.744000000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,44.165000000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_basement_ZN_6_Ceiling-Core_bot_ZN_5-PPAutoCreateOther, !- Name + Floor, !- Surface Type + int_slab_floor, !- Construction Name + Core_bottom, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_basement_ZN_6_Ceiling-Core_bot_ZN_5, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 16.078200000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 1 {m} + 16.078200000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 5.487600000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 5.487600000000,44.165000000000,0.000000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_bot_ZN_5_Wall_South,!- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Core_bottom, !- Zone Name + Surface, !- Outside Boundary Condition + Core_bot_ZN_5_Wall_South-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 5.487600000000,4.573200000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 5.487600000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,4.573200000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_bot_ZN_5_Wall_West, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Core_bottom, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_bot_ZN_6_Wall_East-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 5.487600000000,44.165000000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 5.487600000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 5.487600000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 5.487600000000,4.573200000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_bot_ZN_5_Wall_North,!- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Core_bottom, !- Zone Name + Surface, !- Outside Boundary Condition + Core_bot_ZN_5_Wall_North-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,44.165000000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 5.487600000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 5.487600000000,44.165000000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_bot_ZN_5_Wall_East, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Core_bottom, !- Zone Name + Surface, !- Outside Boundary Condition + Core_bot_ZN_5_Wall_East-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,4.573200000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,44.165000000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_mid_ZN_5_Ceiling, !- Name + Ceiling, !- Surface Type + DropCeiling, !- Construction Name + Core_mid, !- Zone Name + Zone, !- Outside Boundary Condition + MidFloor_Plenum, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 5.487600000000,44.165000000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 5.487600000000,4.573200000000,19.512300000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,4.573200000000,19.512300000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,44.165000000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_mid_ZN_5_Floor, !- Name + Floor, !- Surface Type + int_slab_floor, !- Construction Name + Core_mid, !- Zone Name + Surface, !- Outside Boundary Condition + Core_mid_ZN_5_Floor, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,44.165000000000,16.768300000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,4.573200000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 5.487600000000,4.573200000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 5.487600000000,44.165000000000,16.768300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_mid_ZN_5_Wall_South,!- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Core_mid, !- Zone Name + Surface, !- Outside Boundary Condition + Core_mid_ZN_5_Wall_South-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 5.487600000000,4.573200000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 5.487600000000,4.573200000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,4.573200000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,4.573200000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_mid_ZN_5_Wall_West, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Core_mid, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_mid_ZN_6_Wall_East, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 5.487600000000,44.165000000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 5.487600000000,44.165000000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 5.487600000000,4.573200000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 5.487600000000,4.573200000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_mid_ZN_5_Wall_North,!- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Core_mid, !- Zone Name + Surface, !- Outside Boundary Condition + Core_mid_ZN_5_Wall_North-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,44.165000000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,44.165000000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 5.487600000000,44.165000000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 5.487600000000,44.165000000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_mid_ZN_5_Wall_East, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Core_mid, !- Zone Name + Surface, !- Outside Boundary Condition + Core_mid_ZN_5_Wall_East-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,4.573200000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,4.573200000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,44.165000000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,44.165000000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_top_ZN_5_Ceiling, !- Name + Ceiling, !- Surface Type + DropCeiling, !- Construction Name + Core_top, !- Zone Name + Zone, !- Outside Boundary Condition + TopFloor_Plenum, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 5.487600000000,44.165000000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 5.487600000000,4.573200000000,36.280600000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,4.573200000000,36.280600000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,44.165000000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_top_ZN_5_Floor, !- Name + Floor, !- Surface Type + int_slab_floor, !- Construction Name + Core_top, !- Zone Name + Surface, !- Outside Boundary Condition + Core_top_ZN_5_Floor, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,44.165000000000,33.536600000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,4.573200000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 5.487600000000,4.573200000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 5.487600000000,44.165000000000,33.536600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_top_ZN_5_Wall_South,!- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Core_top, !- Zone Name + Surface, !- Outside Boundary Condition + Core_bot_ZN_5_Wall_South-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 5.487600000000,4.573200000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 5.487600000000,4.573200000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,4.573200000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,4.573200000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_top_ZN_5_Wall_West, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Core_top, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_top_ZN_6_Wall_West-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 5.487600000000,44.165000000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 5.487600000000,44.165000000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 5.487600000000,4.573200000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 5.487600000000,4.573200000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_top_ZN_5_Wall_North,!- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Core_top, !- Zone Name + Surface, !- Outside Boundary Condition + Core_top_ZN_5_Wall_North-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,44.165000000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,44.165000000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 5.487600000000,44.165000000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 5.487600000000,44.165000000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_top_ZN_5_Wall_East, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Core_top, !- Zone Name + Surface, !- Outside Boundary Condition + Core_top_ZN_5_Wall_East-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,4.573200000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,4.573200000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,44.165000000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,44.165000000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_bot_ZN_3_Wall_North, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + Perimeter_bot_ZN_3, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,48.738100000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,48.738100000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,48.738100000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,48.738100000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_bot_ZN_3_Ceiling, !- Name + Ceiling, !- Surface Type + DropCeiling, !- Construction Name + Perimeter_bot_ZN_3, !- Zone Name + Zone, !- Outside Boundary Condition + GroundFloor_Plenum, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,48.738100000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 4.573200000000,44.165000000000,2.744000000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,44.165000000000,2.744000000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,48.738100000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_bot_ZN_3_Floor,!- Name + Floor, !- Surface Type + int_slab_floor, !- Construction Name + Perimeter_bot_ZN_3, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_bot_ZN_3_Floor-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,48.738100000000,0.000000000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 16.078200000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 16.078200000000,48.738100000000,0.000000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_bot_ZN_3_Wall_West, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_bot_ZN_3, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_bot_ZN_3_Wall_West-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,48.738100000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,48.738100000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 4.573200000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 4.573200000000,44.165000000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_bot_ZN_5_Wall_North-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_bot_ZN_3, !- Zone Name + Surface, !- Outside Boundary Condition + Core_bot_ZN_5_Wall_North,!- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 5.487600000000,44.165000000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 5.487600000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,44.165000000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_bot_ZN_2_Wall_North-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_bot_ZN_3, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_bot_ZN_2_Wall_North, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,44.165000000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,48.738100000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,48.738100000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_bot_ZN_2_Wall_East, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + Perimeter_bot_ZN_2, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,0.000000000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,48.738100000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,48.738100000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_bot_ZN_2_Ceiling, !- Name + Ceiling, !- Surface Type + DropCeiling, !- Construction Name + Perimeter_bot_ZN_2, !- Zone Name + Zone, !- Outside Boundary Condition + GroundFloor_Plenum, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,44.165000000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,4.573200000000,2.744000000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,0.000000000000,2.744000000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,48.738100000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_bot_ZN_2_Floor,!- Name + Floor, !- Surface Type + int_slab_floor, !- Construction Name + Perimeter_bot_ZN_2, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_bot_ZN_2_Floor-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,48.738100000000,0.000000000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,44.165000000000,0.000000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_bot_ZN_2_Wall_North, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_bot_ZN_2, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_bot_ZN_2_Wall_North-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,48.738100000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,48.738100000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,44.165000000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_bot_ZN_5_Wall_East-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_bot_ZN_2, !- Zone Name + Surface, !- Outside Boundary Condition + Core_bot_ZN_5_Wall_East, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,44.165000000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,4.573200000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_bot_ZN_1_Wall_East-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_bot_ZN_2, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_bot_ZN_1_Wall_East, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,4.573200000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,0.000000000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_bot_ZN_1_Wall_South, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + Perimeter_bot_ZN_1, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,0.000000000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,0.000000000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_bot_ZN_1_Ceiling, !- Name + Ceiling, !- Surface Type + DropCeiling, !- Construction Name + Perimeter_bot_ZN_1, !- Zone Name + Zone, !- Outside Boundary Condition + GroundFloor_Plenum, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 4.573200000000,4.573200000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,2.744000000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,0.000000000000,2.744000000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,4.573200000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_basement_ZN_6-Perimeter_bot_ZN_1-PPAutoCreateOther, !- Name + Floor, !- Surface Type + int_slab_floor, !- Construction Name + Perimeter_bot_ZN_1, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_basement_ZN_6_Ceiling-Perimeter_bot_ZN_1, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 16.078200000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 1 {m} + 16.078200000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 4.573200000000,4.573200000000,0.000000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_bot_ZN_1_Wall_East, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_bot_ZN_1, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_bot_ZN_1_Wall_East-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,0.000000000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,4.573200000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_bot_ZN_6_Wall_South-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_bot_ZN_1, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_bot_ZN_6_Wall_South, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 5.487600000000,4.573200000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 5.487600000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 4.573200000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 4.573200000000,4.573200000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_bot_ZN_4_Wall_South-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_bot_ZN_1, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_bot_ZN_4_Wall_South, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 4.573200000000,4.573200000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 4.573200000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,0.000000000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_bot_ZN_4_Wall_West, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + Perimeter_bot_ZN_4, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,48.738100000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,48.738100000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,0.000000000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_bot_ZN_4_Ceiling, !- Name + Ceiling, !- Surface Type + DropCeiling, !- Construction Name + Perimeter_bot_ZN_4, !- Zone Name + Zone, !- Outside Boundary Condition + GroundFloor_Plenum, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,48.738100000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,2.744000000000, !- X,Y,Z ==> Vertex 2 {m} + 4.573200000000,4.573200000000,2.744000000000, !- X,Y,Z ==> Vertex 3 {m} + 4.573200000000,44.165000000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_bot_ZN_4_Floor,!- Name + Floor, !- Surface Type + int_slab_floor, !- Construction Name + Perimeter_bot_ZN_4, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_bot_ZN_4_Floor-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 4.573200000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 1 {m} + 4.573200000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,48.738100000000,0.000000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_bot_ZN_4_Wall_South, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_bot_ZN_4, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_bot_ZN_4_Wall_South-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,0.000000000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 4.573200000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 4.573200000000,4.573200000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_bot_ZN_6_Wall_West-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_bot_ZN_4, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_bot_ZN_6_Wall_West, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 4.573200000000,4.573200000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 4.573200000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 4.573200000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 4.573200000000,44.165000000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_bot_ZN_3_Wall_West-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_bot_ZN_4, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_bot_ZN_3_Wall_West, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 4.573200000000,44.165000000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 4.573200000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,48.738100000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,48.738100000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_mid_ZN_3_Wall_North, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + Perimeter_mid_ZN_3, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,48.738100000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,48.738100000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,48.738100000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,48.738100000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_mid_ZN_3_Ceiling, !- Name + Ceiling, !- Surface Type + DropCeiling, !- Construction Name + Perimeter_mid_ZN_3, !- Zone Name + Zone, !- Outside Boundary Condition + MidFloor_Plenum, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,48.738100000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 4.573200000000,44.165000000000,19.512300000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,44.165000000000,19.512300000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,48.738100000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_mid_ZN_3_Floor,!- Name + Floor, !- Surface Type + int_slab_floor, !- Construction Name + Perimeter_mid_ZN_3, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_mid_ZN_3_Floor,!- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,48.738100000000,16.768300000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,44.165000000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 4.573200000000,44.165000000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,48.738100000000,16.768300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_mid_ZN_3_Wall_West, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_mid_ZN_3, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_mid_ZN_3_Wall_West-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,48.738100000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,48.738100000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 4.573200000000,44.165000000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 4.573200000000,44.165000000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_mid_ZN_5_Wall_North-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_mid_ZN_3, !- Zone Name + Surface, !- Outside Boundary Condition + Core_mid_ZN_5_Wall_North,!- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 5.487600000000,44.165000000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 5.487600000000,44.165000000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,44.165000000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,44.165000000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_mid_ZN_2_Wall_North-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_mid_ZN_3, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_mid_ZN_2_Wall_North, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,44.165000000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,44.165000000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,48.738100000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,48.738100000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_mid_ZN_2_Wall_East, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + Perimeter_mid_ZN_2, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,0.000000000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,0.000000000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,48.738100000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,48.738100000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_mid_ZN_2_Ceiling, !- Name + Ceiling, !- Surface Type + DropCeiling, !- Construction Name + Perimeter_mid_ZN_2, !- Zone Name + Zone, !- Outside Boundary Condition + MidFloor_Plenum, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,44.165000000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,4.573200000000,19.512300000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,0.000000000000,19.512300000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,48.738100000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_mid_ZN_2_Floor,!- Name + Floor, !- Surface Type + int_slab_floor, !- Construction Name + Perimeter_mid_ZN_2, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_mid_ZN_2_Floor,!- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,48.738100000000,16.768300000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,0.000000000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,4.573200000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,44.165000000000,16.768300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_mid_ZN_2_Wall_North, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_mid_ZN_2, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_mid_ZN_2_Wall_North-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,48.738100000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,48.738100000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,44.165000000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,44.165000000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_mid_ZN_5_Wall_East-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_mid_ZN_2, !- Zone Name + Surface, !- Outside Boundary Condition + Core_mid_ZN_5_Wall_East, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,44.165000000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,44.165000000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,4.573200000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,4.573200000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_mid_ZN_1_Wall_East-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_mid_ZN_2, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_mid_ZN_1_Wall_East, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,4.573200000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,4.573200000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,0.000000000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,0.000000000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_mid_ZN_1_Wall_East, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_mid_ZN_1, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_mid_ZN_1_Wall_East-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,0.000000000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,0.000000000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,4.573200000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,4.573200000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_mid_ZN_1_Wall_South, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + Perimeter_mid_ZN_1, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,0.000000000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,0.000000000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,0.000000000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_mid_ZN_1_Ceiling, !- Name + Ceiling, !- Surface Type + DropCeiling, !- Construction Name + Perimeter_mid_ZN_1, !- Zone Name + Zone, !- Outside Boundary Condition + MidFloor_Plenum, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 4.573200000000,4.573200000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,19.512300000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,0.000000000000,19.512300000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,4.573200000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_mid_ZN_1_Floor,!- Name + Floor, !- Surface Type + int_slab_floor, !- Construction Name + Perimeter_mid_ZN_1, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_mid_ZN_1_Floor,!- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,4.573200000000,16.768300000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,0.000000000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,0.000000000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 4.573200000000,4.573200000000,16.768300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_mid_ZN_6_Wall_South-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_mid_ZN_1, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_mid_ZN_6_Wall_South, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 5.487600000000,4.573200000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 5.487600000000,4.573200000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 4.573200000000,4.573200000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 4.573200000000,4.573200000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_mid_ZN_4_Wall_South-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_mid_ZN_1, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_mid_ZN_4_Wall_South, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 4.573200000000,4.573200000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 4.573200000000,4.573200000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,0.000000000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,0.000000000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_mid_ZN_4_Wall_West, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + Perimeter_mid_ZN_4, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,48.738100000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,48.738100000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,0.000000000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,0.000000000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_mid_ZN_4_Ceiling, !- Name + Ceiling, !- Surface Type + DropCeiling, !- Construction Name + Perimeter_mid_ZN_4, !- Zone Name + Zone, !- Outside Boundary Condition + MidFloor_Plenum, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,48.738100000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,19.512300000000, !- X,Y,Z ==> Vertex 2 {m} + 4.573200000000,4.573200000000,19.512300000000, !- X,Y,Z ==> Vertex 3 {m} + 4.573200000000,44.165000000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_mid_ZN_4_Floor,!- Name + Floor, !- Surface Type + int_slab_floor, !- Construction Name + Perimeter_mid_ZN_4, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_mid_ZN_4_Floor,!- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 4.573200000000,44.165000000000,16.768300000000, !- X,Y,Z ==> Vertex 1 {m} + 4.573200000000,4.573200000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,0.000000000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,48.738100000000,16.768300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_mid_ZN_4_Wall_South, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_mid_ZN_4, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_mid_ZN_4_Wall_South-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,0.000000000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 4.573200000000,4.573200000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 4.573200000000,4.573200000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_mid_ZN_6_Wall_West-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_mid_ZN_4, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_mid_ZN_6_Wall_West, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 4.573200000000,4.573200000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 4.573200000000,4.573200000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 4.573200000000,44.165000000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 4.573200000000,44.165000000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_mid_ZN_3_Wall_West-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_mid_ZN_4, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_mid_ZN_3_Wall_West, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 4.573200000000,44.165000000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 4.573200000000,44.165000000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,48.738100000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,48.738100000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_top_ZN_3_Wall_North, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + Perimeter_top_ZN_3, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,48.738100000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,48.738100000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,48.738100000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,48.738100000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_top_ZN_3_Ceiling, !- Name + Ceiling, !- Surface Type + DropCeiling, !- Construction Name + Perimeter_top_ZN_3, !- Zone Name + Zone, !- Outside Boundary Condition + TopFloor_Plenum, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,48.738100000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 4.573200000000,44.165000000000,36.280600000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,44.165000000000,36.280600000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,48.738100000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_top_ZN_3_Floor,!- Name + Floor, !- Surface Type + int_slab_floor, !- Construction Name + Perimeter_top_ZN_3, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_top_ZN_3_Floor,!- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,48.738100000000,33.536600000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,44.165000000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 4.573200000000,44.165000000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,48.738100000000,33.536600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_top_ZN_3_Wall_West, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_top_ZN_3, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_top_ZN_3_Wall_West-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,48.738100000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,48.738100000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 4.573200000000,44.165000000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 4.573200000000,44.165000000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_top_ZN_5_Wall_North-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_top_ZN_3, !- Zone Name + Surface, !- Outside Boundary Condition + Core_top_ZN_5_Wall_North,!- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 5.487600000000,44.165000000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 5.487600000000,44.165000000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,44.165000000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,44.165000000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_top_ZN_2_Wall_North-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_top_ZN_3, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_top_ZN_2_Wall_North, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,44.165000000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,44.165000000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,48.738100000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,48.738100000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_top_ZN_2_Wall_East, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + Perimeter_top_ZN_2, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,0.000000000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,0.000000000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,48.738100000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,48.738100000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_top_ZN_2_Ceiling, !- Name + Ceiling, !- Surface Type + DropCeiling, !- Construction Name + Perimeter_top_ZN_2, !- Zone Name + Zone, !- Outside Boundary Condition + TopFloor_Plenum, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + autocalculate, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,44.165000000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,4.573200000000,36.280600000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,0.000000000000,36.280600000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,48.738100000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_top_ZN_2_Floor,!- Name + Floor, !- Surface Type + int_slab_floor, !- Construction Name + Perimeter_top_ZN_2, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_top_ZN_2_Floor,!- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,48.738100000000,33.536600000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,0.000000000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,4.573200000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,44.165000000000,33.536600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_top_ZN_2_Wall_North, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_top_ZN_2, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_top_ZN_2_Wall_North-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,48.738100000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,48.738100000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,44.165000000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,44.165000000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_top_ZN_5_Wall_East-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_top_ZN_2, !- Zone Name + Surface, !- Outside Boundary Condition + Core_top_ZN_5_Wall_East, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,44.165000000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,44.165000000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,4.573200000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,4.573200000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Int-Per3S-NE-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_top_ZN_2, !- Zone Name + Surface, !- Outside Boundary Condition + Int-Per3S-NE, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,4.573200000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,4.573200000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,0.000000000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,0.000000000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_top_ZN_1_Wall_South, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + Perimeter_top_ZN_1, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,0.000000000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,0.000000000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,0.000000000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_top_ZN_1_Ceiling, !- Name + Ceiling, !- Surface Type + DropCeiling, !- Construction Name + Perimeter_top_ZN_1, !- Zone Name + Zone, !- Outside Boundary Condition + TopFloor_Plenum, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 4.573200000000,4.573200000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,36.280600000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,0.000000000000,36.280600000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,4.573200000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_top_ZN_1_Floor,!- Name + Floor, !- Surface Type + int_slab_floor, !- Construction Name + Perimeter_top_ZN_1, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_top_ZN_1_Floor,!- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,4.573200000000,33.536600000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,0.000000000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,0.000000000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 4.573200000000,4.573200000000,33.536600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Int-Per3S-NE, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_top_ZN_1, !- Zone Name + Surface, !- Outside Boundary Condition + Int-Per3S-NE-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,0.000000000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,0.000000000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,4.573200000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,4.573200000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_top_ZN_6_Wall_South-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_top_ZN_1, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_top_ZN_6_Wall_South, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 5.487600000000,4.573200000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 5.487600000000,4.573200000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 4.573200000000,4.573200000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 4.573200000000,4.573200000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_top_ZN_4_Wall_South-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_top_ZN_1, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_top_ZN_4_Wall_South, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 4.573200000000,4.573200000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 4.573200000000,4.573200000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,0.000000000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,0.000000000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_top_ZN_4_Wall_West, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + Perimeter_top_ZN_4, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,48.738100000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,48.738100000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,0.000000000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,0.000000000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_top_ZN_4_Ceiling, !- Name + Ceiling, !- Surface Type + DropCeiling, !- Construction Name + Perimeter_top_ZN_4, !- Zone Name + Zone, !- Outside Boundary Condition + TopFloor_Plenum, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,48.738100000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,36.280600000000, !- X,Y,Z ==> Vertex 2 {m} + 4.573200000000,4.573200000000,36.280600000000, !- X,Y,Z ==> Vertex 3 {m} + 4.573200000000,44.165000000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_top_ZN_4_Floor,!- Name + Floor, !- Surface Type + int_slab_floor, !- Construction Name + Perimeter_top_ZN_4, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_top_ZN_4_Floor,!- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 4.573200000000,44.165000000000,33.536600000000, !- X,Y,Z ==> Vertex 1 {m} + 4.573200000000,4.573200000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,0.000000000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,48.738100000000,33.536600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_top_ZN_4_Wall_South, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_top_ZN_4, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_top_ZN_4_Wall_South-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,0.000000000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 4.573200000000,4.573200000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 4.573200000000,4.573200000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_top_ZN_6_Wall_West-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_top_ZN_4, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_top_ZN_6_Wall_West, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 4.573200000000,4.573200000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 4.573200000000,4.573200000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 4.573200000000,44.165000000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 4.573200000000,44.165000000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_top_ZN_3_Wall_West-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_top_ZN_4, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_top_ZN_3_Wall_West, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + AutoCalculate, !- View Factor to Ground + 4, !- Number of Vertices + 4.573200000000,44.165000000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 4.573200000000,44.165000000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,48.738100000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,48.738100000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + GroundFloor_Plenum_Wall_North, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + GroundFloor_Plenum, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + autocalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,48.738100000000,3.963200000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,48.738100000000,2.744000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,48.738100000000,2.744000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,48.738100000000,3.963200000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + GroundFloor_Plenum_West, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + GroundFloor_Plenum, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + autocalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,48.738100000000,3.963200000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,48.738100000000,2.744000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,0.000000000000,2.744000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,0.000000000000,3.963200000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + GroundFloor_Plenum_Wall_South, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + GroundFloor_Plenum, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + autocalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,0.000000000000,3.963200000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,2.744000000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,0.000000000000,2.744000000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,0.000000000000,3.963200000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + GroundFloor_Plenum_Wall_East, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + GroundFloor_Plenum, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WINDEXPOSED, !- Wind Exposure + autocalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,0.000000000000,3.963200000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,0.000000000000,2.744000000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,48.738100000000,2.744000000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,48.738100000000,3.963200000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + MidFloor_Plenum_Wall_North, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + MidFloor_Plenum, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + autocalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,48.738100000000,20.731500000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,48.738100000000,19.512300000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,48.738100000000,19.512300000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,48.738100000000,20.731500000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + MidFloor_Plenum_Wall_West, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + MidFloor_Plenum, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + autocalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,48.738100000000,20.731500000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,48.738100000000,19.512300000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,0.000000000000,19.512300000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,0.000000000000,20.731500000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + MidFloor_Plenum_Wall_South, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + MidFloor_Plenum, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + autocalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,0.000000000000,20.731500000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,19.512300000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,0.000000000000,19.512300000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,0.000000000000,20.731500000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + MidFloor_Plenum_Wall_East, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + MidFloor_Plenum, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + autocalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,0.000000000000,20.731500000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,0.000000000000,19.512300000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,48.738100000000,19.512300000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,48.738100000000,20.731500000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + TopFloor_Plenum_Wall_North, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + TopFloor_Plenum, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + autocalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,0.000000000000,37.499800000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,36.280600000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,0.000000000000,36.280600000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,0.000000000000,37.499800000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + TopFloor_Plenum_Wall_East, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + TopFloor_Plenum, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + autocalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,0.000000000000,37.499800000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,0.000000000000,36.280600000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,48.738100000000,36.280600000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,48.738100000000,37.499800000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Building_Roof, !- Name + Roof, !- Surface Type + nonres_roof, !- Construction Name + TopFloor_Plenum, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + autocalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,48.738100000000,37.499800000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,37.499800000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,0.000000000000,37.499800000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,48.738100000000,37.499800000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + TopFloor_Plenum_Wall_West, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + TopFloor_Plenum, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + autocalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,48.738100000000,37.499800000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,48.738100000000,36.280600000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,0.000000000000,36.280600000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,0.000000000000,37.499800000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + TopFloor_Plenum_Wall_South, !- Name + Wall, !- Surface Type + nonres_ext_wall, !- Construction Name + TopFloor_Plenum, !- Zone Name + Outdoors, !- Outside Boundary Condition + , !- Outside Boundary Condition Object + SunExposed, !- Sun Exposure + WindExposed, !- Wind Exposure + autocalculate, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,48.738100000000,37.499800000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,48.738100000000,36.280600000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,48.738100000000,36.280600000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,48.738100000000,37.499800000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + GroundFloor_Plenum_Ceiling, !- Name + Ceiling, !- Surface Type + int_slab_ceiling, !- Construction Name + GroundFloor_Plenum, !- Zone Name + Surface, !- Outside Boundary Condition + GroundFloor_Plenum_Ceiling, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + autocalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,48.738100000000,3.963200000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,3.963200000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,0.000000000000,3.963200000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,48.738100000000,3.963200000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + MidFloor_Plenum_Ceiling, !- Name + Ceiling, !- Surface Type + int_slab_ceiling, !- Construction Name + MidFloor_Plenum, !- Zone Name + Surface, !- Outside Boundary Condition + MidFloor_Plenum_Ceiling, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + autocalculate, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,48.738100000000,20.731500000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,20.731500000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,0.000000000000,20.731500000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,48.738100000000,20.731500000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_bot_ZN_6_Floor, !- Name + Floor, !- Surface Type + int_slab_floor, !- Construction Name + DataCenter_bot_ZN_6, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_bot_ZN_6_Floor-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,-39.591800000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + -0.914400000000,-39.591800000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + -0.914400000000,0.000000000000,0.000000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_bot_ZN_6_Wall_North, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + DataCenter_bot_ZN_6, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_bot_ZN_6_Wall_North-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,0.000000000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + -0.914400000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + -0.914400000000,0.000000000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_bot_ZN_6_Wall_South, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + DataCenter_bot_ZN_6, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_bot_ZN_6_Wall_South-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + -0.914400000000,-39.591800000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + -0.914400000000,-39.591800000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,-39.591800000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,-39.591800000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_bot_ZN_6_Wall_East-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + DataCenter_bot_ZN_6, !- Zone Name + Surface, !- Outside Boundary Condition + Core_bot_ZN_5_Wall_West, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,-39.591800000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,-39.591800000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,0.000000000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_bot_ZN_6_Ceiling, !- Name + Ceiling, !- Surface Type + DropCeiling, !- Construction Name + DataCenter_bot_ZN_6, !- Zone Name + Zone, !- Outside Boundary Condition + GroundFloor_Plenum, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + -0.914400000000,0.000000000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + -0.914400000000,-39.591800000000,2.744000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,-39.591800000000,2.744000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,0.000000000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_bot_ZN_6_Wall_West, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + DataCenter_bot_ZN_6, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_bot_ZN_6_Wall_West-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + -0.914400000000,0.000000000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + -0.914400000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + -0.914400000000,-39.591800000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + -0.914400000000,-39.591800000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_bot_ZN_6_Wall_North-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_bot_ZN_3, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_bot_ZN_6_Wall_North, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 4.573200000000,44.165000000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 4.573200000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 5.487600000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 5.487600000000,44.165000000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_bot_ZN_5_Wall_South-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_bot_ZN_1, !- Zone Name + Surface, !- Outside Boundary Condition + Core_bot_ZN_5_Wall_South,!- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,4.573200000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 5.487600000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 5.487600000000,4.573200000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_mid_ZN_6_Floor, !- Name + Floor, !- Surface Type + int_slab_floor, !- Construction Name + DataCenter_mid_ZN_6, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_mid_ZN_6_Floor, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 0.914400000000,39.591800000000,0.000000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.914400000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,39.591800000000,0.000000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_mid_ZN_6_Wall_West, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + DataCenter_mid_ZN_6, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_mid_ZN_6_Wall_West-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,39.591800000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,39.591800000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,0.000000000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_mid_ZN_6_Wall_South, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + DataCenter_mid_ZN_6, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_mid_ZN_6_Wall_South-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,0.000000000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.914400000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.914400000000,0.000000000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_mid_ZN_6_Wall_East, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + DataCenter_mid_ZN_6, !- Zone Name + Surface, !- Outside Boundary Condition + Core_mid_ZN_5_Wall_West, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 0.914400000000,0.000000000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.914400000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.914400000000,39.591800000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.914400000000,39.591800000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_mid_ZN_6_Wall_North, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + DataCenter_mid_ZN_6, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_mid_ZN_6_Wall_North-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 0.914400000000,39.591800000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.914400000000,39.591800000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,39.591800000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,39.591800000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_mid_ZN_6_ceiling, !- Name + Ceiling, !- Surface Type + DropCeiling, !- Construction Name + DataCenter_mid_ZN_6, !- Zone Name + Zone, !- Outside Boundary Condition + MidFloor_Plenum, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,39.591800000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,2.744000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.914400000000,0.000000000000,2.744000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.914400000000,39.591800000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_mid_ZN_5_Wall_South-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_mid_ZN_1, !- Zone Name + Surface, !- Outside Boundary Condition + Core_mid_ZN_5_Wall_South,!- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,4.573200000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,4.573200000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 5.487600000000,4.573200000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 5.487600000000,4.573200000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_mid_ZN_6_Wall_North-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_mid_ZN_3, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_mid_ZN_6_Wall_North, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 4.573200000000,44.165000000000,19.512300000000, !- X,Y,Z ==> Vertex 1 {m} + 4.573200000000,44.165000000000,16.768300000000, !- X,Y,Z ==> Vertex 2 {m} + 5.487600000000,44.165000000000,16.768300000000, !- X,Y,Z ==> Vertex 3 {m} + 5.487600000000,44.165000000000,19.512300000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_top_ZN_6_Wall_North-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_top_ZN_3, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_top_ZN_6_Wall_North, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 4.573200000000,44.165000000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 4.573200000000,44.165000000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 5.487600000000,44.165000000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 5.487600000000,44.165000000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_top_ZN_5_Wall_South-PPAutoCreateOther, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Perimeter_top_ZN_1, !- Zone Name + Surface, !- Outside Boundary Condition + Core_top_ZN_5_Wall_South,!- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,4.573200000000,36.280600000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,4.573200000000,33.536600000000, !- X,Y,Z ==> Vertex 2 {m} + 5.487600000000,4.573200000000,33.536600000000, !- X,Y,Z ==> Vertex 3 {m} + 5.487600000000,4.573200000000,36.280600000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_top_ZN_6_Floor, !- Name + Floor, !- Surface Type + int_slab_floor, !- Construction Name + DataCenter_top_ZN_6, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_top_ZN_6_Floor, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 0.914400000000,39.591800000000,0.000000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.914400000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,39.591800000000,0.000000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_top_ZN_6_Wall_East, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + DataCenter_top_ZN_6, !- Zone Name + Surface, !- Outside Boundary Condition + Core_top_ZN_5_Wall_West, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 0.914400000000,0.000000000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.914400000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.914400000000,39.591800000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.914400000000,39.591800000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_top_ZN_6_Wall_West, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + DataCenter_top_ZN_6, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_top_ZN_6_Wall_West-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,39.591800000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,39.591800000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,0.000000000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_top_ZN_6_Wall_South, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + DataCenter_top_ZN_6, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_top_ZN_6_Wall_South-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,0.000000000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.914400000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.914400000000,0.000000000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_top_ZN_6_ceiling, !- Name + Ceiling, !- Surface Type + DropCeiling, !- Construction Name + DataCenter_top_ZN_6, !- Zone Name + Zone, !- Outside Boundary Condition + TopFloor_Plenum, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,39.591800000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,2.744000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.914400000000,0.000000000000,2.744000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.914400000000,39.591800000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_top_ZN_6_Wall_North, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + DataCenter_top_ZN_6, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_top_ZN_6_Wall_North-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 0.914400000000,39.591800000000,2.744000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.914400000000,39.591800000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,39.591800000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,39.591800000000,2.744000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_bot_ZN_5_Floor-PPAutoCreateOther, !- Name + Ceiling, !- Surface Type + int_slab_ceiling, !- Construction Name + Basement, !- Zone Name + Surface, !- Outside Boundary Condition + Core_bot_ZN_5_Floor, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 16.079400000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 1 {m} + 16.079400000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 68.534000000000,44.165000000000,0.000000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Core_bot_ZN_5_Floor, !- Name + Floor, !- Surface Type + int_slab_floor, !- Construction Name + Core_bottom, !- Zone Name + Surface, !- Outside Boundary Condition + Core_bot_ZN_5_Floor-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 1 {m} + 68.534000000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 16.078200000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 16.078200000000,44.165000000000,0.000000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_bot_ZN_3_Floor-PPAutoCreateOther, !- Name + Ceiling, !- Surface Type + int_slab_ceiling, !- Construction Name + Basement, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_bot_ZN_3_Floor,!- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 16.079400000000,48.738100000000,0.000000000000, !- X,Y,Z ==> Vertex 1 {m} + 16.079400000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 68.534000000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,48.738100000000,0.000000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Basement_Wall_South, !- Name + Wall, !- Surface Type + basement_wall, !- Construction Name + Basement, !- Zone Name + OtherSideCoefficients, !- Outside Boundary Condition + surfPropOthSdCoefBasementAvgWall, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 16.079400000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 1 {m} + 16.079400000000,0.000000000000,-2.439000000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,0.000000000000,-2.439000000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,0.000000000000,0.000000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Basement_Floor, !- Name + Floor, !- Surface Type + ext_slab_8in_with_carpet,!- Construction Name + Basement, !- Zone Name + OtherSideCoefficients, !- Outside Boundary Condition + surfPropOthSdCoefBasementAvgFloor, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,48.738100000000,-2.439000000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,0.000000000000,-2.439000000000, !- X,Y,Z ==> Vertex 2 {m} + 16.079400000000,0.000000000000,-2.439000000000, !- X,Y,Z ==> Vertex 3 {m} + 16.079400000000,48.738100000000,-2.439000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Basement_Wall_North, !- Name + Wall, !- Surface Type + basement_wall, !- Construction Name + Basement, !- Zone Name + OtherSideCoefficients, !- Outside Boundary Condition + surfPropOthSdCoefBasementAvgWall, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 73.107200000000,48.738100000000,0.000000000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,48.738100000000,-2.439000000000, !- X,Y,Z ==> Vertex 2 {m} + 16.079400000000,48.738100000000,-2.439000000000, !- X,Y,Z ==> Vertex 3 {m} + 16.079400000000,48.738100000000,0.000000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Basement_Wall_West, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + Basement, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_basement_ZN_6_Wall_East, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 16.079400000000,48.738100000000,0.000000000000, !- X,Y,Z ==> Vertex 1 {m} + 16.079400000000,48.738100000000,-2.439000000000, !- X,Y,Z ==> Vertex 2 {m} + 16.079400000000,0.000000000000,-2.439000000000, !- X,Y,Z ==> Vertex 3 {m} + 16.079400000000,0.000000000000,0.000000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_basement_ZN_6_Floor, !- Name + Floor, !- Surface Type + ext_slab_8in_with_carpet,!- Construction Name + DataCenter_basement_ZN_6,!- Zone Name + OtherSideCoefficients, !- Outside Boundary Condition + surfPropOthSdCoefBasementAvgFloor, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,48.738100000000,0.000000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + -16.079400000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + -16.079400000000,48.738100000000,0.000000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_basement_ZN_6_Wall_North, !- Name + Wall, !- Surface Type + basement_wall, !- Construction Name + DataCenter_basement_ZN_6,!- Zone Name + OtherSideCoefficients, !- Outside Boundary Condition + surfPropOthSdCoefBasementAvgWall, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + -0.001200000000,48.738100000000,2.439000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,48.738100000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + -16.079400000000,48.738100000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + -16.079400000000,48.738100000000,2.439000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_basement_ZN_6_Wall_South, !- Name + Wall, !- Surface Type + basement_wall, !- Construction Name + DataCenter_basement_ZN_6,!- Zone Name + OtherSideCoefficients, !- Outside Boundary Condition + surfPropOthSdCoefBasementAvgWall, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + -16.079400000000,0.000000000000,2.439000000000, !- X,Y,Z ==> Vertex 1 {m} + -16.079400000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,0.000000000000,2.439000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_basement_ZN_6_Wall_West, !- Name + Wall, !- Surface Type + basement_wall, !- Construction Name + DataCenter_basement_ZN_6,!- Zone Name + OtherSideCoefficients, !- Outside Boundary Condition + surfPropOthSdCoefBasementAvgWall, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + -16.079400000000,48.738100000000,2.439000000000, !- X,Y,Z ==> Vertex 1 {m} + -16.079400000000,48.738100000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + -16.079400000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + -16.079400000000,0.000000000000,2.439000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_bot_ZN_6_Floor-PPAutoCreateOther, !- Name + Ceiling, !- Surface Type + int_slab_ceiling, !- Construction Name + DataCenter_basement_ZN_6,!- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_bot_ZN_6_Floor, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + -11.506200000000,44.165000000000,2.439000000000, !- X,Y,Z ==> Vertex 1 {m} + -11.506200000000,4.573200000000,2.439000000000, !- X,Y,Z ==> Vertex 2 {m} + -10.591800000000,4.573200000000,2.439000000000, !- X,Y,Z ==> Vertex 3 {m} + -10.591800000000,44.165000000000,2.439000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_basement_ZN_6_Ceiling-Core_bot_ZN_5, !- Name + Ceiling, !- Surface Type + int_slab_ceiling, !- Construction Name + DataCenter_basement_ZN_6,!- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_basement_ZN_6_Ceiling-Core_bot_ZN_5-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + -10.591800000000,44.165000000000,2.439000000000, !- X,Y,Z ==> Vertex 1 {m} + -10.591800000000,4.573200000000,2.439000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,4.573200000000,2.439000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,44.165000000000,2.439000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_bot_ZN_4_Floor-PPAutoCreateOther, !- Name + Ceiling, !- Surface Type + int_slab_ceiling, !- Construction Name + DataCenter_basement_ZN_6,!- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_bot_ZN_4_Floor,!- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + -16.079400000000,48.738100000000,2.439000000000, !- X,Y,Z ==> Vertex 1 {m} + -16.079400000000,0.000000000000,2.439000000000, !- X,Y,Z ==> Vertex 2 {m} + -11.506200000000,4.573200000000,2.439000000000, !- X,Y,Z ==> Vertex 3 {m} + -11.506200000000,44.165000000000,2.439000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_basement_ZN_6_Ceiling-Perimeter_bot_ZN_1, !- Name + Ceiling, !- Surface Type + int_slab_ceiling, !- Construction Name + DataCenter_basement_ZN_6,!- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_basement_ZN_6-Perimeter_bot_ZN_1-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + -11.506200000000,4.573200000000,2.439000000000, !- X,Y,Z ==> Vertex 1 {m} + -16.079400000000,0.000000000000,2.439000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,0.000000000000,2.439000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,4.573200000000,2.439000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_basement_ZN_6_Ceiling-Perimeter_bot_ZN_3, !- Name + Ceiling, !- Surface Type + int_slab_ceiling, !- Construction Name + DataCenter_basement_ZN_6,!- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_basement_ZN_6_Ceiling-Perimeter_bot_ZN_3-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + -16.079400000000,48.738100000000,2.439000000000, !- X,Y,Z ==> Vertex 1 {m} + -11.506200000000,44.165000000000,2.439000000000, !- X,Y,Z ==> Vertex 2 {m} + -0.001200000000,44.165000000000,2.439000000000, !- X,Y,Z ==> Vertex 3 {m} + -0.001200000000,48.738100000000,2.439000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + Perimeter_bot_ZN_1_Floor,!- Name + Floor, !- Surface Type + int_slab_floor, !- Construction Name + Perimeter_bot_ZN_1, !- Zone Name + Surface, !- Outside Boundary Condition + Perimeter_bot_ZN_1_Floor-PPAutoCreateOther, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 68.534000000000,4.573200000000,0.000000000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 16.078200000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 16.078200000000,4.573200000000,0.000000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_basement_ZN_6_Ceiling-Perimeter_bot_ZN_3-PPAutoCreateOther, !- Name + Floor, !- Surface Type + int_slab_floor, !- Construction Name + Perimeter_bot_ZN_3, !- Zone Name + Surface, !- Outside Boundary Condition + DataCenter_basement_ZN_6_Ceiling-Perimeter_bot_ZN_3, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 16.078200000000,48.738100000000,0.000000000000, !- X,Y,Z ==> Vertex 1 {m} + 16.078200000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 4.573200000000,44.165000000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,48.738100000000,0.000000000000; !- X,Y,Z ==> Vertex 4 {m} + + + + BuildingSurface:Detailed, + DataCenter_basement_ZN_6_Wall_East, !- Name + Wall, !- Surface Type + int_wall, !- Construction Name + DataCenter_basement_ZN_6,!- Zone Name + Surface, !- Outside Boundary Condition + Basement_Wall_West, !- Outside Boundary Condition Object + NoSun, !- Sun Exposure + NoWind, !- Wind Exposure + 0.0, !- View Factor to Ground + 4, !- Number of Vertices + 0.000000000000,0.000000000000,2.439000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,0.000000000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,48.738100000000,0.000000000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,48.738100000000,2.439000000000; !- X,Y,Z ==> Vertex 4 {m} + +!- =========== ALL OBJECTS IN CLASS: SURFACE:HEATTRANSFER:SUB =========== +!- WWR is modified for IECC analysis +!- WWR is specified through the parm file. Bottom vertex is modified through the following calculations to reflect window height. +!- WWR = 30% for IECC 2012. WWR = 40% f0r 90.1 2004, 2007, 2010, 2013 and IECC 2006, 2009 +!- window_height = (73.1072 * 3.9632) *$wwr)/73.107 => 3.96320*$wwr + + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_3_Wall_North_Window1, !- Name + Window, !- Surface Type + Window_U_0.41_SHGC_0.38, !- Construction Name + Perimeter_bot_ZN_3_Wall_North, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 73.107000000000,48.738100000000,2.500000000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107000000000,48.738100000000,0.801436000000, !- X,Y,Z ==> Vertex 2 {m} + 59.460850000000,48.738100000000,0.801436000000, !- X,Y,Z ==> Vertex 3 {m} + 59.460850000000,48.738100000000,2.500000000000; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_3_Wall_North_Window2, !- Name + Window, !- Surface Type + Window_U_0.41_SHGC_0.38, !- Construction Name + Perimeter_bot_ZN_3_Wall_North, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 58.241650000000,48.738100000000,2.500000000000, !- X,Y,Z ==> Vertex 1 {m} + 58.241650000000,48.738100000000,0.801436000000, !- X,Y,Z ==> Vertex 2 {m} + 44.595500000000,48.738100000000,0.801436000000, !- X,Y,Z ==> Vertex 3 {m} + 44.595500000000,48.738100000000,2.500000000000; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_3_Wall_North_Window3, !- Name + Window, !- Surface Type + Window_U_0.41_SHGC_0.38, !- Construction Name + Perimeter_bot_ZN_3_Wall_North, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 43.376300000000,48.738100000000,2.500000000000, !- X,Y,Z ==> Vertex 1 {m} + 43.376300000000,48.738100000000,0.801436000000, !- X,Y,Z ==> Vertex 2 {m} + 29.730150000000,48.738100000000,0.801436000000, !- X,Y,Z ==> Vertex 3 {m} + 29.730150000000,48.738100000000,2.500000000000; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_3_Wall_North_Window4, !- Name + Window, !- Surface Type + Window_U_0.41_SHGC_0.38, !- Construction Name + Perimeter_bot_ZN_3_Wall_North, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 28.510950000000,48.738100000000,2.500000000000, !- X,Y,Z ==> Vertex 1 {m} + 28.510950000000,48.738100000000,0.801436000000, !- X,Y,Z ==> Vertex 2 {m} + 14.864800000000,48.738100000000,0.801436000000, !- X,Y,Z ==> Vertex 3 {m} + 14.864800000000,48.738100000000,2.500000000000; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_3_Wall_North_Window5, !- Name + Window, !- Surface Type + Window_U_0.41_SHGC_0.38, !- Construction Name + Perimeter_bot_ZN_3_Wall_North, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 13.645600000000,48.738100000000,2.500000000000, !- X,Y,Z ==> Vertex 1 {m} + 13.645600000000,48.738100000000,0.801436000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,48.738100000000,0.801436000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,48.738100000000,2.500000000000; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_2_Wall_East_Window1, !- Name + Window, !- Surface Type + Window_U_0.41_SHGC_0.38, !- Construction Name + Perimeter_bot_ZN_2_Wall_East, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 73.107200000000,0.000000000000,2.500000000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,0.000000000000,0.831154000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,15.433294000000,0.831154000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,15.433294000000,2.500000000000; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_2_Wall_East_Window2, !- Name + Window, !- Surface Type + Window_U_0.41_SHGC_0.38, !- Construction Name + Perimeter_bot_ZN_2_Wall_East, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 73.107200000000,16.652494000000,2.500000000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,16.652494000000,0.831154000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,32.085788000000,0.831154000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,32.085788000000,2.500000000000; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_2_Wall_East_Window3, !- Name + Window, !- Surface Type + Window_U_0.41_SHGC_0.38, !- Construction Name + Perimeter_bot_ZN_2_Wall_East, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 73.107200000000,33.304988000000,2.500000000000, !- X,Y,Z ==> Vertex 1 {m} + 73.107200000000,33.304988000000,0.831154000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107200000000,48.738000000000,0.831154000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107200000000,48.738000000000,2.500000000000; !- X,Y,Z ==> Vertex 4 {m} + + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_1_Wall_South_Window1, !- Name + Window, !- Surface Type + Window_U_0.41_SHGC_0.38, !- Construction Name + Perimeter_bot_ZN_1_Wall_South, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 0.000000000000,0.000000000000,2.500000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,0.000000000000,0.801436000000, !- X,Y,Z ==> Vertex 2 {m} + 13.646150000000,0.000000000000,0.801436000000, !- X,Y,Z ==> Vertex 3 {m} + 13.646150000000,0.000000000000,2.500000000000; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_1_Wall_South_Window2, !- Name + Window, !- Surface Type + Window_U_0.41_SHGC_0.38, !- Construction Name + Perimeter_bot_ZN_1_Wall_South, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 14.865350000000,0.000000000000,2.500000000000, !- X,Y,Z ==> Vertex 1 {m} + 14.865350000000,0.000000000000,0.801436000000, !- X,Y,Z ==> Vertex 2 {m} + 28.511500000000,0.000000000000,0.801436000000, !- X,Y,Z ==> Vertex 3 {m} + 28.511500000000,0.000000000000,2.500000000000; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_1_Wall_South_Window3, !- Name + Window, !- Surface Type + Window_U_0.41_SHGC_0.38, !- Construction Name + Perimeter_bot_ZN_1_Wall_South, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 29.730700000000,0.000000000000,2.500000000000, !- X,Y,Z ==> Vertex 1 {m} + 29.730700000000,0.000000000000,0.801436000000, !- X,Y,Z ==> Vertex 2 {m} + 43.376850000000,0.000000000000,0.801436000000, !- X,Y,Z ==> Vertex 3 {m} + 43.376850000000,0.000000000000,2.500000000000; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_1_Wall_South_Window4, !- Name + Window, !- Surface Type + Window_U_0.41_SHGC_0.38, !- Construction Name + Perimeter_bot_ZN_1_Wall_South, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 44.596050000000,0.000000000000,2.500000000000, !- X,Y,Z ==> Vertex 1 {m} + 44.596050000000,0.000000000000,0.801436000000, !- X,Y,Z ==> Vertex 2 {m} + 58.242200000000,0.000000000000,0.801436000000, !- X,Y,Z ==> Vertex 3 {m} + 58.242200000000,0.000000000000,2.500000000000; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_1_Wall_South_Window5, !- Name + Window, !- Surface Type + Window_U_0.41_SHGC_0.38, !- Construction Name + Perimeter_bot_ZN_1_Wall_South, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 59.461400000000,0.000000000000,2.500000000000, !- X,Y,Z ==> Vertex 1 {m} + 59.461400000000,0.000000000000,0.801436000000, !- X,Y,Z ==> Vertex 2 {m} + 73.107000000000,0.000000000000,0.801436000000, !- X,Y,Z ==> Vertex 3 {m} + 73.107000000000,0.000000000000,2.500000000000; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_4_Wall_West_Window1, !- Name + Window, !- Surface Type + Window_U_0.41_SHGC_0.38, !- Construction Name + Perimeter_bot_ZN_4_Wall_West, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 0.000000000000,48.738000000000,2.500000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,48.738000000000,0.831154000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,33.304706000000,0.831154000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,33.304706000000,2.500000000000; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_4_Wall_West_Window2, !- Name + Window, !- Surface Type + Window_U_0.41_SHGC_0.38, !- Construction Name + Perimeter_bot_ZN_4_Wall_West, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 0.000000000000,32.085506000000,2.500000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,32.085506000000,0.831154000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,16.652212000000,0.831154000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,16.652212000000,2.500000000000; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_4_Wall_West_Window3, !- Name + Window, !- Surface Type + Window_U_0.41_SHGC_0.38, !- Construction Name + Perimeter_bot_ZN_4_Wall_West, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 0.000000000000,15.433012000000,2.500000000000, !- X,Y,Z ==> Vertex 1 {m} + 0.000000000000,15.433012000000,0.831154000000, !- X,Y,Z ==> Vertex 2 {m} + 0.000000000000,0.000000000000,0.831154000000, !- X,Y,Z ==> Vertex 3 {m} + 0.000000000000,0.000000000000,2.500000000000; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_mid_ZN_3_Wall_North_Window, !- Name + Window, !- Surface Type + Window_U_0.41_SHGC_0.38, !- Construction Name + Perimeter_mid_ZN_3_Wall_North, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 73.107000,48.738100,19.268300, !- X,Y,Z ==> Vertex 1 {m} + 73.107000,48.738100,17.68302, !- X,Y,Z ==> Vertex 2 {m} + 0.000000,48.738100,17.68302, !- X,Y,Z ==> Vertex 3 {m} + 0.000000,48.738100,19.268300; !- X,Y,Z ==> Vertex 4 {m} + + + + FenestrationSurface:Detailed, + Perimeter_mid_ZN_2_Wall_East_Window, !- Name + Window, !- Surface Type + Window_U_0.41_SHGC_0.38, !- Construction Name + Perimeter_mid_ZN_2_Wall_East, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 73.107200,0.000000,19.268300, !- X,Y,Z ==> Vertex 1 {m} + 73.107200,0.000000,17.68302, !- X,Y,Z ==> Vertex 2 {m} + 73.107200,48.738000,17.68302, !- X,Y,Z ==> Vertex 3 {m} + 73.107200,48.738000,19.268300; !- X,Y,Z ==> Vertex 4 {m} + + + + FenestrationSurface:Detailed, + Perimeter_mid_ZN_1_Wall_South_Window, !- Name + Window, !- Surface Type + Window_U_0.41_SHGC_0.38, !- Construction Name + Perimeter_mid_ZN_1_Wall_South, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 0.000000,0.000000,19.268300, !- X,Y,Z ==> Vertex 1 {m} + 0.000000,0.000000,17.68302, !- X,Y,Z ==> Vertex 2 {m} + 73.107000,0.000000,17.68302, !- X,Y,Z ==> Vertex 3 {m} + 73.107000,0.000000,19.268300; !- X,Y,Z ==> Vertex 4 {m} + + + + FenestrationSurface:Detailed, + Perimeter_mid_ZN_4_Wall_West_Window, !- Name + Window, !- Surface Type + Window_U_0.41_SHGC_0.38, !- Construction Name + Perimeter_mid_ZN_4_Wall_West, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 0.000000,48.738000,19.268300, !- X,Y,Z ==> Vertex 1 {m} + 0.000000,48.738000,17.68302, !- X,Y,Z ==> Vertex 2 {m} + 0.000000,0.000000,17.68302, !- X,Y,Z ==> Vertex 3 {m} + 0.000000,0.000000,19.268300; !- X,Y,Z ==> Vertex 4 {m} + + + + FenestrationSurface:Detailed, + Perimeter_top_ZN_3_Wall_North_Window, !- Name + Window, !- Surface Type + Window_U_0.41_SHGC_0.38, !- Construction Name + Perimeter_top_ZN_3_Wall_North, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 73.107000,48.738100,36.036600, !- X,Y,Z ==> Vertex 1 {m} + 73.107000,48.738100,34.45132, !- X,Y,Z ==> Vertex 2 {m} + 0.000000,48.738100,34.45132, !- X,Y,Z ==> Vertex 3 {m} + 0.000000,48.738100,36.036600; !- X,Y,Z ==> Vertex 4 {m} + + + + FenestrationSurface:Detailed, + Perimeter_top_ZN_2_Wall_East_Window, !- Name + Window, !- Surface Type + Window_U_0.41_SHGC_0.38, !- Construction Name + Perimeter_top_ZN_2_Wall_East, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 73.107200,0.000000,36.036600, !- X,Y,Z ==> Vertex 1 {m} + 73.107200,0.000000,34.45132, !- X,Y,Z ==> Vertex 2 {m} + 73.107200,48.738000,34.45132, !- X,Y,Z ==> Vertex 3 {m} + 73.107200,48.738000,36.036600; !- X,Y,Z ==> Vertex 4 {m} + + + + FenestrationSurface:Detailed, + Perimeter_top_ZN_1_Wall_South_Window, !- Name + Window, !- Surface Type + Window_U_0.41_SHGC_0.38, !- Construction Name + Perimeter_top_ZN_1_Wall_South, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 0.000000,0.000000,36.036600, !- X,Y,Z ==> Vertex 1 {m} + 0.000000,0.000000,34.45132, !- X,Y,Z ==> Vertex 2 {m} + 73.107000,0.000000,34.45132, !- X,Y,Z ==> Vertex 3 {m} + 73.107000,0.000000,36.036600; !- X,Y,Z ==> Vertex 4 {m} + + + + FenestrationSurface:Detailed, + Perimeter_top_ZN_4_Wall_West_Window, !- Name + Window, !- Surface Type + Window_U_0.41_SHGC_0.38, !- Construction Name + Perimeter_top_ZN_4_Wall_West, !- Building Surface Name + , !- Outside Boundary Condition Object + AutoCalculate, !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + 1.0000, !- Multiplier + 4, !- Number of Vertices + 0.000000,48.738000,36.036600, !- X,Y,Z ==> Vertex 1 {m} + 0.000000,48.738000,34.45132, !- X,Y,Z ==> Vertex 2 {m} + 0.000000,0.000000,34.45132, !- X,Y,Z ==> Vertex 3 {m} + 0.000000,0.000000,36.036600; !- X,Y,Z ==> Vertex 4 {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_4_Wall_West_Door1, !- Name + Door, !- Surface Type + Swinging Door_con, !- Construction Name + Perimeter_bot_ZN_4_Wall_West, !- Building Surface Name + , !- Outside Boundary Condition Object + , !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + , !- Multiplier + 4, !- Number of Vertices + 0.000000000000, !- Vertex 1 X-coordinate {m} + 33.185179805763, !- Vertex 1 Y-coordinate {m} + 2.133600000000, !- Vertex 1 Z-coordinate {m} + 0.000000000000, !- Vertex 2 X-coordinate {m} + 33.185179805763, !- Vertex 2 Y-coordinate {m} + 0.000000000000, !- Vertex 2 Z-coordinate {m} + 0.000000000000, !- Vertex 3 X-coordinate {m} + 32.270779805763, !- Vertex 3 Y-coordinate {m} + 0.000000000000, !- Vertex 3 Z-coordinate {m} + 0.000000000000, !- Vertex 4 X-coordinate {m} + 32.270779805763, !- Vertex 4 Y-coordinate {m} + 2.133600000000; !- Vertex 4 Z-coordinate {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_4_Wall_West_Door2, !- Name + Door, !- Surface Type + Swinging Door_con, !- Construction Name + Perimeter_bot_ZN_4_Wall_West, !- Building Surface Name + , !- Outside Boundary Condition Object + , !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + , !- Multiplier + 4, !- Number of Vertices + 0.000000000000, !- Vertex 1 X-coordinate {m} + 16.552817982567, !- Vertex 1 Y-coordinate {m} + 2.133600000000, !- Vertex 1 Z-coordinate {m} + 0.000000000000, !- Vertex 2 X-coordinate {m} + 16.552817982567, !- Vertex 2 Y-coordinate {m} + 0.000000000000, !- Vertex 2 Z-coordinate {m} + 0.000000000000, !- Vertex 3 X-coordinate {m} + 15.638417982567, !- Vertex 3 Y-coordinate {m} + 0.000000000000, !- Vertex 3 Z-coordinate {m} + 0.000000000000, !- Vertex 4 X-coordinate {m} + 15.638417982567, !- Vertex 4 Y-coordinate {m} + 2.133600000000; !- Vertex 4 Z-coordinate {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_1_Wall_South_Door1, !- Name + Door, !- Surface Type + Swinging Door_con, !- Construction Name + Perimeter_bot_ZN_1_Wall_South, !- Building Surface Name + , !- Outside Boundary Condition Object + , !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + , !- Multiplier + 4, !- Number of Vertices + 13.810736114328, !- Vertex 1 X-coordinate {m} + 0.000000000000, !- Vertex 1 Y-coordinate {m} + 2.133600000000, !- Vertex 1 Z-coordinate {m} + 13.810736114328, !- Vertex 2 X-coordinate {m} + 0.000000000000, !- Vertex 2 Y-coordinate {m} + 0.000000000000, !- Vertex 2 Z-coordinate {m} + 14.725136114328, !- Vertex 3 X-coordinate {m} + 0.000000000000, !- Vertex 3 Y-coordinate {m} + 0.000000000000, !- Vertex 3 Z-coordinate {m} + 14.725136114328, !- Vertex 4 X-coordinate {m} + 0.000000000000, !- Vertex 4 Y-coordinate {m} + 2.133600000000; !- Vertex 4 Z-coordinate {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_1_Wall_South_Door2, !- Name + Door, !- Surface Type + Swinging Door_con, !- Construction Name + Perimeter_bot_ZN_1_Wall_South, !- Building Surface Name + , !- Outside Boundary Condition Object + , !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + , !- Multiplier + 4, !- Number of Vertices + 28.643695630079, !- Vertex 1 X-coordinate {m} + 0.000000000000, !- Vertex 1 Y-coordinate {m} + 2.133600000000, !- Vertex 1 Z-coordinate {m} + 28.643695630079, !- Vertex 2 X-coordinate {m} + 0.000000000000, !- Vertex 2 Y-coordinate {m} + 0.000000000000, !- Vertex 2 Z-coordinate {m} + 29.558095630079, !- Vertex 3 X-coordinate {m} + 0.000000000000, !- Vertex 3 Y-coordinate {m} + 0.000000000000, !- Vertex 3 Z-coordinate {m} + 29.558095630079, !- Vertex 4 X-coordinate {m} + 0.000000000000, !- Vertex 4 Y-coordinate {m} + 2.133600000000; !- Vertex 4 Z-coordinate {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_1_Wall_South_Door3, !- Name + Door, !- Surface Type + Swinging Door_con, !- Construction Name + Perimeter_bot_ZN_1_Wall_South, !- Building Surface Name + , !- Outside Boundary Condition Object + , !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + , !- Multiplier + 4, !- Number of Vertices + 43.526278450605, !- Vertex 1 X-coordinate {m} + 0.000000000000, !- Vertex 1 Y-coordinate {m} + 2.133600000000, !- Vertex 1 Z-coordinate {m} + 43.526278450605, !- Vertex 2 X-coordinate {m} + 0.000000000000, !- Vertex 2 Y-coordinate {m} + 0.000000000000, !- Vertex 2 Z-coordinate {m} + 44.440678450605, !- Vertex 3 X-coordinate {m} + 0.000000000000, !- Vertex 3 Y-coordinate {m} + 0.000000000000, !- Vertex 3 Z-coordinate {m} + 44.440678450605, !- Vertex 4 X-coordinate {m} + 0.000000000000, !- Vertex 4 Y-coordinate {m} + 2.133600000000; !- Vertex 4 Z-coordinate {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_1_Wall_South_Door4, !- Name + Door, !- Surface Type + Swinging Door_con, !- Construction Name + Perimeter_bot_ZN_1_Wall_South, !- Building Surface Name + , !- Outside Boundary Condition Object + , !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + , !- Multiplier + 4, !- Number of Vertices + 58.430380500539, !- Vertex 1 X-coordinate {m} + 0.000000000000, !- Vertex 1 Y-coordinate {m} + 2.133600000000, !- Vertex 1 Z-coordinate {m} + 58.430380500539, !- Vertex 2 X-coordinate {m} + 0.000000000000, !- Vertex 2 Y-coordinate {m} + 0.000000000000, !- Vertex 2 Z-coordinate {m} + 59.344780500539, !- Vertex 3 X-coordinate {m} + 0.000000000000, !- Vertex 3 Y-coordinate {m} + 0.000000000000, !- Vertex 3 Z-coordinate {m} + 59.344780500539, !- Vertex 4 X-coordinate {m} + 0.000000000000, !- Vertex 4 Y-coordinate {m} + 2.133600000000; !- Vertex 4 Z-coordinate {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_2_Wall_East_Door1, !- Name + Door, !- Surface Type + Swinging Door_con, !- Construction Name + Perimeter_bot_ZN_2_Wall_East, !- Building Surface Name + , !- Outside Boundary Condition Object + , !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + , !- Multiplier + 4, !- Number of Vertices + 73.107200000000, !- Vertex 1 X-coordinate {m} + 15.598040704848, !- Vertex 1 Y-coordinate {m} + 2.133600000000, !- Vertex 1 Z-coordinate {m} + 73.107200000000, !- Vertex 2 X-coordinate {m} + 15.598040704848, !- Vertex 2 Y-coordinate {m} + 0.000000000000, !- Vertex 2 Z-coordinate {m} + 73.107200000000, !- Vertex 3 X-coordinate {m} + 16.512440704848, !- Vertex 3 Y-coordinate {m} + 0.000000000000, !- Vertex 3 Z-coordinate {m} + 73.107200000000, !- Vertex 4 X-coordinate {m} + 16.512440704848, !- Vertex 4 Y-coordinate {m} + 2.133600000000; !- Vertex 4 Z-coordinate {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_2_Wall_East_Door2, !- Name + Door, !- Surface Type + Swinging Door_con, !- Construction Name + Perimeter_bot_ZN_2_Wall_East, !- Building Surface Name + , !- Outside Boundary Condition Object + , !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + , !- Multiplier + 4, !- Number of Vertices + 73.107200000000, !- Vertex 1 X-coordinate {m} + 32.208787109866, !- Vertex 1 Y-coordinate {m} + 2.133600000000, !- Vertex 1 Z-coordinate {m} + 73.107200000000, !- Vertex 2 X-coordinate {m} + 32.208787109866, !- Vertex 2 Y-coordinate {m} + 0.000000000000, !- Vertex 2 Z-coordinate {m} + 73.107200000000, !- Vertex 3 X-coordinate {m} + 33.123187109866, !- Vertex 3 Y-coordinate {m} + 0.000000000000, !- Vertex 3 Z-coordinate {m} + 73.107200000000, !- Vertex 4 X-coordinate {m} + 33.123187109866, !- Vertex 4 Y-coordinate {m} + 2.133600000000; !- Vertex 4 Z-coordinate {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_3_Wall_North_Door1, !- Name + Door, !- Surface Type + Swinging Door_con, !- Construction Name + Perimeter_bot_ZN_3_Wall_North, !- Building Surface Name + , !- Outside Boundary Condition Object + , !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + , !- Multiplier + 4, !- Number of Vertices + 59.294409384709, !- Vertex 1 X-coordinate {m} + 48.738100000000, !- Vertex 1 Y-coordinate {m} + 2.133600000000, !- Vertex 1 Z-coordinate {m} + 59.294409384709, !- Vertex 2 X-coordinate {m} + 48.738100000000, !- Vertex 2 Y-coordinate {m} + 0.000000000000, !- Vertex 2 Z-coordinate {m} + 58.380009384709, !- Vertex 3 X-coordinate {m} + 48.738100000000, !- Vertex 3 Y-coordinate {m} + 0.000000000000, !- Vertex 3 Z-coordinate {m} + 58.380009384709, !- Vertex 4 X-coordinate {m} + 48.738100000000, !- Vertex 4 Y-coordinate {m} + 2.133600000000; !- Vertex 4 Z-coordinate {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_3_Wall_North_Door2, !- Name + Door, !- Surface Type + Swinging Door_con, !- Construction Name + Perimeter_bot_ZN_3_Wall_North, !- Building Surface Name + , !- Outside Boundary Condition Object + , !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + , !- Multiplier + 4, !- Number of Vertices + 44.438376131067, !- Vertex 1 X-coordinate {m} + 48.738100000000, !- Vertex 1 Y-coordinate {m} + 2.133600000000, !- Vertex 1 Z-coordinate {m} + 44.438376131067, !- Vertex 2 X-coordinate {m} + 48.738100000000, !- Vertex 2 Y-coordinate {m} + 0.000000000000, !- Vertex 2 Z-coordinate {m} + 43.523976131067, !- Vertex 3 X-coordinate {m} + 48.738100000000, !- Vertex 3 Y-coordinate {m} + 0.000000000000, !- Vertex 3 Z-coordinate {m} + 43.523976131067, !- Vertex 4 X-coordinate {m} + 48.738100000000, !- Vertex 4 Y-coordinate {m} + 2.133600000000; !- Vertex 4 Z-coordinate {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_3_Wall_North_Door3, !- Name + Door, !- Surface Type + Swinging Door_con, !- Construction Name + Perimeter_bot_ZN_3_Wall_North, !- Building Surface Name + , !- Outside Boundary Condition Object + , !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + , !- Multiplier + 4, !- Number of Vertices + 29.612533284962, !- Vertex 1 X-coordinate {m} + 48.738100000000, !- Vertex 1 Y-coordinate {m} + 2.133600000000, !- Vertex 1 Z-coordinate {m} + 29.612533284962, !- Vertex 2 X-coordinate {m} + 48.738100000000, !- Vertex 2 Y-coordinate {m} + 0.000000000000, !- Vertex 2 Z-coordinate {m} + 28.698133284962, !- Vertex 3 X-coordinate {m} + 48.738100000000, !- Vertex 3 Y-coordinate {m} + 0.000000000000, !- Vertex 3 Z-coordinate {m} + 28.698133284962, !- Vertex 4 X-coordinate {m} + 48.738100000000, !- Vertex 4 Y-coordinate {m} + 2.133600000000; !- Vertex 4 Z-coordinate {m} + + FenestrationSurface:Detailed, + Perimeter_bot_ZN_3_Wall_North_Door4, !- Name + Door, !- Surface Type + Swinging Door_con, !- Construction Name + Perimeter_bot_ZN_3_Wall_North, !- Building Surface Name + , !- Outside Boundary Condition Object + , !- View Factor to Ground + , !- Shading Control Name + , !- Frame and Divider Name + , !- Multiplier + 4, !- Number of Vertices + 14.737252885612, !- Vertex 1 X-coordinate {m} + 48.738100000000, !- Vertex 1 Y-coordinate {m} + 2.133600000000, !- Vertex 1 Z-coordinate {m} + 14.737252885612, !- Vertex 2 X-coordinate {m} + 48.738100000000, !- Vertex 2 Y-coordinate {m} + 0.000000000000, !- Vertex 2 Z-coordinate {m} + 13.822852885612, !- Vertex 3 X-coordinate {m} + 48.738100000000, !- Vertex 3 Y-coordinate {m} + 0.000000000000, !- Vertex 3 Z-coordinate {m} + 13.822852885612, !- Vertex 4 X-coordinate {m} + 48.738100000000, !- Vertex 4 Y-coordinate {m} + 2.133600000000; !- Vertex 4 Z-coordinate {m} + +!- =========== ALL OBJECTS IN CLASS: SURFACE:HEATTRANSFER:INTERNALMASS =========== + + + InternalMass, + Basement_InternalMass_1, !- Name + InteriorFurnishings, !- Construction Name + Basement, !- Zone Name + 7126.2120; !- Surface Area {m2} + + + + InternalMass, + Core_bottom_InternalMass_1, !- Name + InteriorFurnishings, !- Construction Name + Core_bottom, !- Zone Name + 5064.6526; !- Surface Area {m2} + + + + InternalMass, + Core_mid_InternalMass_1, !- Name + InteriorFurnishings, !- Construction Name + Core_mid, !- Zone Name + 5064.6526; !- Surface Area {m2} + + + + InternalMass, + Core_top_InternalMass_1, !- Name + InteriorFurnishings, !- Construction Name + Core_top, !- Zone Name + 5064.6526; !- Surface Area {m2} + + + + InternalMass, + Perimeter_bot_ZN_3_InternalMass_1, !- Name + InteriorFurnishings, !- Construction Name + Perimeter_bot_ZN_3, !- Zone Name + 626.8258; !- Surface Area {m2} + + + + InternalMass, + Perimeter_bot_ZN_2_InternalMass_1, !- Name + InteriorFurnishings, !- Construction Name + Perimeter_bot_ZN_2, !- Zone Name + 403.9504; !- Surface Area {m2} + + + + InternalMass, + Perimeter_bot_ZN_1_InternalMass_1, !- Name + InteriorFurnishings, !- Construction Name + Perimeter_bot_ZN_1, !- Zone Name + 626.8354; !- Surface Area {m2} + + + + InternalMass, + Perimeter_bot_ZN_4_InternalMass_1, !- Name + InteriorFurnishings, !- Construction Name + Perimeter_bot_ZN_4, !- Zone Name + 403.9478; !- Surface Area {m2} + + + + InternalMass, + Perimeter_mid_ZN_3_InternalMass_1, !- Name + InteriorFurnishings, !- Construction Name + Perimeter_mid_ZN_3, !- Zone Name + 626.8258; !- Surface Area {m2} + + + + InternalMass, + Perimeter_mid_ZN_2_InternalMass_1, !- Name + InteriorFurnishings, !- Construction Name + Perimeter_mid_ZN_2, !- Zone Name + 403.9504; !- Surface Area {m2} + + + + InternalMass, + Perimeter_mid_ZN_1_InternalMass_1, !- Name + InteriorFurnishings, !- Construction Name + Perimeter_mid_ZN_1, !- Zone Name + 626.8354; !- Surface Area {m2} + + + + InternalMass, + Perimeter_mid_ZN_4_InternalMass_1, !- Name + InteriorFurnishings, !- Construction Name + Perimeter_mid_ZN_4, !- Zone Name + 403.9478; !- Surface Area {m2} + + + + InternalMass, + Perimeter_top_ZN_3_InternalMass_1, !- Name + InteriorFurnishings, !- Construction Name + Perimeter_top_ZN_3, !- Zone Name + 626.8258; !- Surface Area {m2} + + + + InternalMass, + Perimeter_top_ZN_2_InternalMass_1, !- Name + InteriorFurnishings, !- Construction Name + Perimeter_top_ZN_2, !- Zone Name + 403.9504; !- Surface Area {m2} + + + + InternalMass, + Perimeter_top_ZN_1_InternalMass_1, !- Name + InteriorFurnishings, !- Construction Name + Perimeter_top_ZN_1, !- Zone Name + 626.8354; !- Surface Area {m2} + + + + InternalMass, + Perimeter_top_ZN_4_InternalMass_1, !- Name + InteriorFurnishings, !- Construction Name + Perimeter_top_ZN_4, !- Zone Name + 403.9478; !- Surface Area {m2} + +!- =========== ALL OBJECTS IN CLASS: OTHERSIDECOEFFICIENTS =========== +!- =========== ALL OBJECTS IN CLASS: SCHEDULETYPE =========== + + + ScheduleTypeLimits, + Any Number; !- Name + + + + ScheduleTypeLimits, + Fraction, !- Name + 0.0, !- Lower Limit Value + 1.0, !- Upper Limit Value + Continuous; !- Numeric Type + + + + ScheduleTypeLimits, + Temperature, !- Name + -60, !- Lower Limit Value + 200, !- Upper Limit Value + Continuous; !- Numeric Type + + + + ScheduleTypeLimits, + On/Off, !- Name + 0, !- Lower Limit Value + 1, !- Upper Limit Value + Discrete; !- Numeric Type + + + + ScheduleTypeLimits, + Control Type, !- Name + 0, !- Lower Limit Value + 4, !- Upper Limit Value + Discrete; !- Numeric Type + + + + ScheduleTypeLimits, + Humidity, !- Name + 10, !- Lower Limit Value + 90, !- Upper Limit Value + Continuous; !- Numeric Type + + + + ScheduleTypeLimits, + Number; !- Name + +!- =========== ALL OBJECTS IN CLASS: SCHEDULE:COMPACT =========== + + + Schedule:Compact, + DataCenter_ExtraElecHeatC_Sch, !- Name + On/Off, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,1; !- Field 3 + + + + Schedule:Compact, + DataCenter_ExtraWaterHeatC_Sch, !- Name + On/Off, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,1; !- Field 3 + + + + Schedule:Compact, + Exterior_lighting_schedule_a, !- Name + fraction, !- Schedule Type Limits Name + Through:12/31, !- Field 1 + For:AllDays, !- Field 2 + Until: 06:00,0, !- Field 3 + Until: 24:00,1; !- Field 5 + + + Schedule:Compact, + Exterior_lighting_schedule_b, !- Name + fraction, !- Schedule Type Limits Name + Through:12/31, !- Field 1 + For:AllDays, !- Field 2 + Until: 06:00,0.7, !- Field 3 + Until: 24:00,1; !- Field 5 + + Schedule:Compact, + Exterior_lighting_schedule_a_IECC2015, !- Name + fraction, !- Schedule Type Limits Name + Through:12/31, !- Field 1 + For:Weekdays SummerDesignDay, !- Field 2 + Until: 07:00,0, !- Field 3 + Until: 22:00,1, !- Field 4 + Until: 24:00,0, !- Field 4 + For:Saturdays, !- Field 5 + Until: 07:00,0, !- Field 3 + Until: 18:00,1, !- Field 4 + Until: 24:00,0, !- Field 4 + For:AllOtherDays, !- Field 8 + Until: 24:00,0; !- Field 9 + + + Schedule:Compact, + Exterior_lighting_schedule_b_2016, !- Name + fraction, !- Schedule Type Limits Name + Through:12/31, !- Field 1 + For:AllDays, !- Field 2 + Until: 06:00,0.5, !- Field 3 + Until: 24:00,1; !- Field 5 + + + Schedule:Compact, + Exterior_lighting_schedule_c_2016, !- Name + fraction, !- Schedule Type Limits Name + Through:12/31, !- Field 1 + For:AllDays, !- Field 2 + Until: 06:00,0.5, !- Field 3 + Until: 19:00,1, !- Field 3 + Until: 24:00,0.5; !- Field 5 + + + + Schedule:Compact, + Hours_of_operation, !- Name + on/off, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: Weekdays SummerDesignDay, !- Field 2 + Until: 06:00,0.0, !- Field 3 + Until: 22:00,1.0, !- Field 5 + Until: 24:00,0.0, !- Field 7 + For: Saturday WinterDesignDay, !- Field 9 + Until: 06:00,0.0, !- Field 10 + Until: 18:00,1.0, !- Field 12 + Until: 24:00,0.0, !- Field 14 + For: Sunday Holidays AllOtherDays, !- Field 16 + Until: 24:00,0.0; !- Field 17 + + Schedule:Compact, + ALWAYS_ON, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,1.0; !- Field 3 + + Schedule:Compact, + Exterior_Lgt_ALWAYS_ON, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,1; !- Field 3 + + + Schedule:Compact, + Exterior_Lgt_189_1, !- Name + Fraction, !- Schedule Type Limits Name + Through:12/31, !- Field 1 + For:Weekdays, !- Field 2 + Until: 9:00,0.5, !- Field 3 + Until: 24:00,1.0, !- Field 5 + For:Saturday, !- Field 7 + Until: 9:00,0.5, !- Field 8 + Until: 19:00,1.0, !- Field 10 + Until: 24:00,0.5, !- Field 12 + FOR: Sunday Holidays AllOtherDays, !- Field 14 + Until: 9:00,0.5, !- Field 15 + Until: 18:00,1.0, !- Field 17 + Until: 24:00,0.5; !- Field 19 + + + + Schedule:Compact, + ALWAYS_OFF, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,0.0; !- Field 3 + + + Schedule:Compact, + HVACOperationSchd, !- Name + on/off, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: Weekdays SummerDesignDay, !- Field 2 + Until: 06:00,0.0, !- Field 3 + Until: 22:00,1.0, !- Field 5 + Until: 24:00,0.0, !- Field 7 + For: Saturday WinterDesignDay, !- Field 9 + Until: 06:00,0.0, !- Field 10 + Until: 18:00,1.0, !- Field 12 + Until: 24:00,0.0, !- Field 14 + For: Sunday Holidays AllOtherDays, !- Field 16 + Until: 24:00,0.0; !- Field 17 + + +! lighting schedules for ASHRAE90.1-STD2004, ASHRAE90.1-2007 + +! lighting schedules for ASHRAE90.1-STD2010 + +! lighting schedules for IECC2006 / IECC2009 + +! lighting schedules for IECC2012 + +! lighting schedules for IECC2015 + +! lighting schedules for ASHRAE1891_2009 + +! lighting schedules for ASHRAE1891_2011 + +! lighting schedules for ASHRAE90.1-2013 + Schedule:Compact, + BLDG_LIGHT_SCH, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: Weekdays, !- Field 2 + Until: 5:00,0.05, !- Field 3 + Until: 6:00,0.1, !- Field 4 + Until: 7:00,0.090560114, !- Field 5 + Until: 8:00,0.271680342, !- Field 6 + Until: 17:00,0.815041026, !- Field 7 + Until: 18:00,0.45280057, !- Field 8 + Until: 20:00,0.271680342, !- Field 9 + Until: 22:00,0.181120228, !- Field 10 + Until: 23:00,0.090560114, !- Field 11 + Until: 24:00,0.045280057, !- Field 12 + For: SummerDesignDay, !- Field 13 + Until: 24:00,1, !- Field 14 + For: Saturday, !- Field 15 + Until: 6:00,0.05, !- Field 16 + Until: 8:00,0.090560114, !- Field 17 + Until: 12:00,0.271680342, !- Field 18 + Until: 17:00,0.135840171, !- Field 19 + Until: 19:00,0.045280057, !- Field 20 + Until: 24:00,0.05, !- Field 21 + For: WinterDesignDay, !- Field 22 + Until: 24:00,0, !- Field 23 + For: Sunday Holidays AllOtherDays, !- Field 24 + Until: 6:00,0.05, !- Field 25 + Until: 18:00,0.045280057, !- Field 26 + Until: 24:00,0.05; !- Field 27 + + + + + + Schedule:Compact, + EXTERIOR_LIGHT_SCH, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 07:00,1.0, !- Field 3 + Until: 19:00,0.0, !- Field 5 + Until: 24:00,1.0; !- Field 7 + +! Schedule Office Receptacle, ASHRAE 90.1-1989, Section 13 + + + Schedule:Compact, + BLDG_EQUIP_SCH, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: Weekdays, !- Field 2 + Until: 06:00,0.2947764352, !- Field 3 + Until: 08:00,0.3796573052, !- Field 3 + Until: 12:00,0.8542289367, !- Field 5 + Until: 13:00,0.7593146104, !- Field 7 + Until: 17:00,0.8542289367, !- Field 9 + Until: 18:00,0.4745716315, !- Field 11 + Until: 24:00,0.3796573052, !- Field 13 + For: SummerDesignDay, !- Field 15 + Until: 24:00,1.0, !- Field 16 + For: Saturday, !- Field 18 + Until: 06:00,0.2210823264, !- Field 19 + Until: 08:00,0.3796573052, !- Field 21 + Until: 12:00,0.4745716315, !- Field 23 + Until: 17:00,0.33220014205, !- Field 25 + Until: 19:00,0.2847429789, !- Field 27 + Until: 24:00,0.2210823264, !- Field 27 + For: WinterDesignDay, !- Field 29 + Until: 24:00,0.0, !- Field 30 + For: Sunday Holidays AllOtherDays, !- Field 32 + Until: 06:00,0.2210823264, !- Field 33 + Until: 18:00,0.2847429789, !- Field 33 + Until: 24:00,0.2210823264; !- Field 33 + + + Schedule:Compact, + BLDG_OCC_SCH, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: Weekdays, !- Field 2 + Until: 06:00,0.0, !- Field 3 + Until: 07:00,0.1, !- Field 5 + Until: 08:00,0.2, !- Field 7 + Until: 12:00,0.95, !- Field 9 + Until: 13:00,0.5, !- Field 11 + Until: 17:00,0.95, !- Field 13 + Until: 18:00,0.3, !- Field 15 + Until: 22:00,0.1, !- Field 17 + Until: 24:00,0.05, !- Field 19 + For: SummerDesignDay, !- Field 21 + Until: 06:00,0.000000001, !- Field 22 + Until: 22:00,1.0, !- Field 24 + Until: 24:00,0.05, !- Field 26 + For: Saturday, !- Field 28 + Until: 06:00,0.0, !- Field 29 + Until: 08:00,0.1, !- Field 31 + Until: 12:00,0.3, !- Field 33 + Until: 17:00,0.1, !- Field 35 + Until: 19:00,0.05, !- Field 37 + Until: 24:00,0.0, !- Field 39 + For: WinterDesignDay, !- Field 41 + Until: 24:00,0.0, !- Field 42 + For: Sunday Holidays AllOtherDays, !- Field 44 + Until: 06:00,0.0, !- Field 45 + Until: 18:00,0.05, !- Field 47 + Until: 24:00,0.0; !- Field 49 + + + + Schedule:Compact, + BLDG_ELEVATORS, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: SummerDesignDay, !- Field 2 + Until: 24:00,0.5, !- Field 3 + For: WinterDesignDay, !- Field 5 + Until: 24:00,0.05, !- Field 6 + For: AllOtherDays, !- Field 8 + Until: 04:00,0.05, !- Field 9 + Until: 05:00,0.10, !- Field 11 + Until: 06:00,0.20, !- Field 13 + Until: 07:00,0.40, !- Field 15 + Until: 09:00,0.50, !- Field 17 + Until: 10:00,0.35, !- Field 19 + Until: 16:00,0.15, !- Field 21 + Until: 17:00,0.35, !- Field 23 + Until: 19:00,0.50, !- Field 25 + Until: 21:00,0.40, !- Field 27 + Until: 22:00,0.30, !- Field 29 + Until: 23:00,0.20, !- Field 31 + Until: 24:00,0.10; !- Field 33 + + + + Schedule:Compact, + ELEV_LIGHT_FAN_SCH_24_7, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,1; !- Field 3 + + + + Schedule:Compact, + ELEV_LIGHT_FAN_SCH_ADD_DF, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: SummerDesignDay, !- Field 2 + Until: 24:00,0.5, !- Field 3 + For: WinterDesignDay, !- Field 5 + Until: 24:00,0.05, !- Field 6 + For: AllOtherDays, !- Field 8 + Until: 04:00,0.05, !- Field 9 + Until: 05:00,0.10, !- Field 11 + Until: 06:00,0.20, !- Field 13 + Until: 07:00,0.40, !- Field 15 + Until: 09:00,0.50, !- Field 17 + Until: 10:00,0.35, !- Field 19 + Until: 16:00,0.15, !- Field 21 + Until: 17:00,0.35, !- Field 23 + Until: 19:00,0.50, !- Field 25 + Until: 21:00,0.40, !- Field 27 + Until: 22:00,0.30, !- Field 29 + Until: 23:00,0.20, !- Field 31 + Until: 24:00,0.10; !- Field 33 + +! Schedule Office Service Water Heating, ASHRAE 90.1-1989, Section 13 + + Schedule:Compact, + BLDG_SWH_SCH, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: Weekdays SummerDesignDay, !- Field 2 + Until: 05:00,0.00, !- Field 3 + Until: 06:00,0.00, !- Field 5 + Until: 07:00,0.07, !- Field 7 + Until: 08:00,0.19, !- Field 9 + Until: 09:00,0.35, !- Field 11 + Until: 10:00,0.38, !- Field 13 + Until: 11:00,0.39, !- Field 15 + Until: 12:00,0.47, !- Field 17 + Until: 13:00,0.57, !- Field 19 + Until: 14:00,0.54, !- Field 21 + Until: 15:00,0.34, !- Field 23 + Until: 16:00,0.33, !- Field 25 + Until: 17:00,0.44, !- Field 27 + Until: 18:00,0.26, !- Field 29 + Until: 19:00,0.21, !- Field 31 + Until: 20:00,0.15, !- Field 33 + Until: 21:00,0.17, !- Field 35 + Until: 22:00,0.08, !- Field 37 + Until: 24:00,0.05, !- Field 39 + For: Saturday WinterDesignDay, !- Field 41 + Until: 05:00,0.00, !- Field 42 + Until: 06:00,0.00, !- Field 44 + Until: 07:00,0.07, !- Field 46 + Until: 08:00,0.11, !- Field 48 + Until: 09:00,0.15, !- Field 50 + Until: 10:00,0.21, !- Field 52 + Until: 11:00,0.19, !- Field 54 + Until: 12:00,0.23, !- Field 56 + Until: 13:00,0.20, !- Field 58 + Until: 14:00,0.19, !- Field 60 + Until: 15:00,0.15, !- Field 62 + Until: 16:00,0.13, !- Field 64 + Until: 17:00,0.14, !- Field 66 + Until: 21:00,0.07, !- Field 68 + Until: 22:00,0.09, !- Field 70 + Until: 24:00,0.05, !- Field 72 + For: Sunday Holidays AllOtherDays, !- Field 74 + Until: 06:00,0.00, !- Field 75 + Until: 07:00,0.07, !- Field 77 + Until: 11:00,0.04, !- Field 79 + Until: 13:00,0.06, !- Field 81 + Until: 14:00,0.09, !- Field 83 + Until: 15:00,0.06, !- Field 85 + Until: 21:00,0.04, !- Field 87 + Until: 22:00,0.07, !- Field 89 + Until: 24:00,0.04; !- Field 91 + + + + Schedule:Compact, + ACTIVITY_SCH, !- Name + Any Number, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,120.; !- Field 3 + + + + Schedule:Compact, + WORK_EFF_SCH, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,0.0; !- Field 3 + + + + Schedule:Compact, + AIR_VELO_SCH, !- Name + Any Number, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,0.2; !- Field 3 + + + + Schedule:Compact, + CLOTHING_SCH, !- Name + Any Number, !- Schedule Type Limits Name + Through: 04/30, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,1.0, !- Field 3 + Through: 09/30, !- Field 5 + For: AllDays, !- Field 6 + Until: 24:00,0.5, !- Field 7 + Through: 12/31, !- Field 9 + For: AllDays, !- Field 10 + Until: 24:00,1.0; !- Field 11 + + + + Schedule:Compact, + INFIL_SCH, !- Name + fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: Weekdays SummerDesignDay, !- Field 2 + Until: 06:00,1.0, !- Field 3 + Until: 22:00,0.0, !- Field 5 + Until: 24:00,1.0, !- Field 7 + For: Saturday WinterDesignDay, !- Field 9 + Until: 06:00,1.0, !- Field 10 + Until: 18:00,0.0, !- Field 12 + Until: 24:00,1.0, !- Field 14 + For: Sunday Holidays AllOtherDays, !- Field 16 + Until: 24:00,1.0; !- Field 17 + + + + Schedule:Compact, + INFIL_SCH_PNNL, !- Name + fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: Weekdays SummerDesignDay, !- Field 2 + Until: 06:00,1.0, !- Field 3 + Until: 22:00,0.25, !- Field 5 + Until: 24:00,1.0, !- Field 7 + For: Saturday WinterDesignDay, !- Field 9 + Until: 06:00,1.0, !- Field 10 + Until: 18:00,0.25, !- Field 12 + Until: 24:00,1.0, !- Field 14 + For: Sunday Holidays AllOtherDays, !- Field 16 + Until: 24:00,1.0; !- Field 17 + + + + Schedule:Compact, + INFIL_HALF_ON_SCH, !- Name + fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: Weekdays SummerDesignDay, !- Field 2 + Until: 06:00,1.0, !- Field 3 + Until: 22:00,0.5, !- Field 5 + Until: 24:00,1.0, !- Field 7 + For: Saturday WinterDesignDay, !- Field 9 + Until: 06:00,1.0, !- Field 10 + Until: 18:00,0.5, !- Field 12 + Until: 24:00,1.0, !- Field 14 + For: Sunday Holidays AllOtherDays, !- Field 16 + Until: 24:00,1.0; !- Field 17 + + + + Schedule:Compact, + SHADING_SCH, !- Name + Any Number, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,0.0; !- Field 3 + + + + Schedule:Compact, + PlantOnSched, !- Name + On/Off, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,1.0; !- Field 3 + + + + Schedule:Compact, + FAN_SCH, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,1.0; !- Field 3 + + + + Schedule:Compact, + ReheatCoilAvailSched, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,1.0; !- Field 3 + + + + Schedule:Compact, + CoolingCoilAvailSched, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,1.0; !- Field 3 + + + + Schedule:Compact, + HTGSETP_SCH_YES_OPTIMUM, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: WinterDesignDay, !- Field 2 + Until: 05:00,15.6, !- Field 3 + Until: 06:00,17.6, !- Field 5 + Until: 07:00,19.6, !- Field 7 + Until: 22:00,21.0, !- Field 9 + Until: 24:00,15.6, !- Field 11 + For: Weekdays, !- Field 13 + Until: 04:00,15.6, !- Field 14 + Until: 05:00,17.8, !- Field 16 + Until: 06:00,20.0, !- Field 18 + Until: 22:00,21.0, !- Field 20 + Until: 24:00,15.6, !- Field 22 + For SummerDesignDay, !- Field 24 + Until: 24:00,15.6, !- Field 25 + For: Saturday, !- Field 27 + Until: 04:00,15.6, !- Field 28 + Until: 05:00,17.8, !- Field 30 + Until: 06:00,20.0, !- Field 32 + Until: 17:00,21.0, !- Field 34 + Until: 24:00,15.6, !- Field 36 + For: Sunday Holidays AllOtherDays, !- Field 38 + Until: 24:00,15.6; !- Field 39 + + + + Schedule:Compact, + HTGSETP_SCH_YES_OPTIMUM_original, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: WinterDesignDay, !- Field 2 + Until: 05:00,15.6, !- Field 3 + Until: 06:00,17.6, !- Field 5 + Until: 07:00,19.6, !- Field 7 + Until: 22:00,21.0, !- Field 9 + Until: 24:00,15.6, !- Field 11 + For: Weekdays, !- Field 13 + Until: 04:00,15.6, !- Field 14 + Until: 05:00,17.8, !- Field 16 + Until: 06:00,20.0, !- Field 18 + Until: 22:00,21.0, !- Field 20 + Until: 24:00,15.6, !- Field 22 + For SummerDesignDay, !- Field 24 + Until: 24:00,15.6, !- Field 25 + For: Saturday, !- Field 27 + Until: 04:00,15.6, !- Field 28 + Until: 05:00,17.8, !- Field 30 + Until: 06:00,20.0, !- Field 32 + Until: 17:00,21.0, !- Field 34 + Until: 24:00,15.6, !- Field 36 + For: Sunday Holidays AllOtherDays, !- Field 38 + Until: 24:00,15.6; !- Field 39 + + + + Schedule:Compact, + HTGSETP_SCH_NO_OPTIMUM, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: WinterDesignDay, !- Field 2 + Until: 05:00,15.6, !- Field 3 + Until: 06:00,17.6, !- Field 5 + Until: 07:00,19.6, !- Field 7 + Until: 22:00,21.0, !- Field 9 + Until: 24:00,15.6, !- Field 11 + For: Weekdays, !- Field 13 + Until: 04:00,15.6, !- Field 14 + Until: 05:00,21.0, !- Field 16 + Until: 06:00,21.0, !- Field 18 + Until: 22:00,21.0, !- Field 20 + Until: 24:00,15.6, !- Field 22 + For SummerDesignDay, !- Field 24 + Until: 24:00,15.6, !- Field 25 + For: Saturday, !- Field 27 + Until: 04:00,15.6, !- Field 28 + Until: 05:00,21.0, !- Field 30 + Until: 06:00,21.0, !- Field 32 + Until: 17:00,21.0, !- Field 34 + Until: 24:00,15.6, !- Field 36 + For: Sunday Holidays AllOtherDays, !- Field 38 + Until: 24:00,15.6; !- Field 39 + + + Schedule:Compact, + HTGSETP_SCH_CAV_bas, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: WinterDesignDay, !- Field 2 + Until: 05:00,15.6, !- Field 3 + Until: 06:00,17.6, !- Field 5 + Until: 07:00,19.6, !- Field 7 + Until: 22:00,21.0, !- Field 9 + Until: 24:00,15.6, !- Field 11 + For: Weekdays, !- Field 13 + Until: 04:00,15.6, !- Field 14 + Until: 05:00,21.0, !- Field 16 + Until: 06:00,21.0, !- Field 18 + Until: 22:00,21.0, !- Field 20 + Until: 24:00,15.6, !- Field 22 + For SummerDesignDay, !- Field 24 + Until: 24:00,15.6, !- Field 25 + For: Saturday, !- Field 27 + Until: 04:00,15.6, !- Field 28 + Until: 05:00,21.0, !- Field 30 + Until: 06:00,21.0, !- Field 32 + Until: 17:00,21.0, !- Field 34 + Until: 24:00,15.6, !- Field 36 + For: Sunday Holidays AllOtherDays, !- Field 38 + Until: 24:00,15.6; !- Field 39 + + + + Schedule:Compact, + CLGSETP_SCH_YES_OPTIMUM, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: SummerDesignDay, !- Field 2 + Until: 05:00,26.7, !- Field 3 + Until: 06:00,25.7, !- Field 5 + Until: 07:00,25.0, !- Field 7 + Until: 22:00,24.0, !- Field 9 + Until: 24:00,26.7, !- Field 11 + For: Weekdays, !- Field 13 + Until: 04:00,26.7, !- Field 14 + Until: 05:00,25.6, !- Field 16 + Until: 06:00,25.0, !- Field 18 + Until: 22:00,24.0, !- Field 20 + Until: 24:00,26.7, !- Field 22 + For: Saturday, !- Field 24 + Until: 04:00,26.7, !- Field 25 + Until: 05:00,25.6, !- Field 27 + Until: 06:00,25.0, !- Field 29 + Until: 17:00,24.0, !- Field 31 + Until: 24:00,26.7, !- Field 33 + For WinterDesignDay, !- Field 35 + Until: 24:00,26.7, !- Field 36 + For: Sunday Holidays AllOtherDays, !- Field 38 + Until: 24:00,26.7; !- Field 39 + + + + Schedule:Compact, + CLGSETP_SCH_YES_OPTIMUM_original, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: SummerDesignDay, !- Field 2 + Until: 05:00,26.7, !- Field 3 + Until: 06:00,25.7, !- Field 5 + Until: 07:00,25.0, !- Field 7 + Until: 22:00,24.0, !- Field 9 + Until: 24:00,26.7, !- Field 11 + For: Weekdays, !- Field 13 + Until: 04:00,26.7, !- Field 14 + Until: 05:00,25.6, !- Field 16 + Until: 06:00,25.0, !- Field 18 + Until: 22:00,24.0, !- Field 20 + Until: 24:00,26.7, !- Field 22 + For: Saturday, !- Field 24 + Until: 04:00,26.7, !- Field 25 + Until: 05:00,25.6, !- Field 27 + Until: 06:00,25.0, !- Field 29 + Until: 17:00,24.0, !- Field 31 + Until: 24:00,26.7, !- Field 33 + For WinterDesignDay, !- Field 35 + Until: 24:00,26.7, !- Field 36 + For: Sunday Holidays AllOtherDays, !- Field 38 + Until: 24:00,26.7; !- Field 39 + + + + Schedule:Compact, + CLGSETP_SCH_NO_OPTIMUM, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: SummerDesignDay, !- Field 2 + Until: 05:00,26.7, !- Field 3 + Until: 06:00,25.7, !- Field 5 + Until: 07:00,25.0, !- Field 7 + Until: 22:00,24.0, !- Field 9 + Until: 24:00,26.7, !- Field 11 + For: Weekdays, !- Field 13 + Until: 04:00,26.7, !- Field 14 + Until: 05:00,24.0, !- Field 16 + Until: 06:00,24.0, !- Field 18 + Until: 22:00,24.0, !- Field 20 + Until: 24:00,26.7, !- Field 22 + For: Saturday, !- Field 24 + Until: 04:00,26.7, !- Field 25 + Until: 05:00,24.0, !- Field 27 + Until: 06:00,24.0, !- Field 29 + Until: 17:00,24.0, !- Field 31 + Until: 24:00,26.7, !- Field 33 + For WinterDesignDay, !- Field 35 + Until: 24:00,26.7, !- Field 36 + For: Sunday Holidays AllOtherDays, !- Field 38 + Until: 24:00,26.7; !- Field 39 + + + Schedule:Compact, + CLGSETP_SCH_NO_SETBACK, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: SummerDesignDay, !- Field 2 + Until: 05:00,26.7, !- Field 3 + Until: 06:00,25.7, !- Field 5 + Until: 07:00,25.0, !- Field 7 + Until: 22:00,24.0, !- Field 9 + Until: 24:00,26.7, !- Field 11 + For: Weekdays, !- Field 13 + Until: 05:00,24.0, !- Field 14 + Until: 06:00,24.0, !- Field 16 + Until: 07:00,24.0, !- Field 18 + Until: 22:00,24.0, !- Field 20 + Until: 24:00,24.0, !- Field 22 + For: Saturday, !- Field 24 + Until: 05:00,24.0, !- Field 25 + Until: 06:00,24.0, !- Field 27 + Until: 07:00,24.0, !- Field 29 + Until: 17:00,24.0, !- Field 31 + Until: 24:00,24.0, !- Field 33 + For WinterDesignDay, !- Field 35 + Until: 24:00,24.0, !- Field 36 + For: Sunday Holidays AllOtherDays, !- Field 38 + Until: 24:00,24.0; !- Field 39 + + + + Schedule:Compact, + CLGSETP_SCH_CAV_bas, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: SummerDesignDay, !- Field 2 + Until: 05:00,26.7, !- Field 3 + Until: 06:00,25.7, !- Field 5 + Until: 07:00,25.0, !- Field 7 + Until: 22:00,24.0, !- Field 9 + Until: 24:00,26.7, !- Field 11 + For: Weekdays, !- Field 13 + Until: 04:00,26.7, !- Field 14 + Until: 05:00,24.0, !- Field 16 + Until: 06:00,24.0, !- Field 18 + Until: 22:00,24.0, !- Field 20 + Until: 24:00,26.7, !- Field 22 + For: Saturday, !- Field 24 + Until: 04:00,26.7, !- Field 25 + Until: 05:00,24.0, !- Field 27 + Until: 06:00,24.0, !- Field 29 + Until: 17:00,24.0, !- Field 31 + Until: 24:00,26.7, !- Field 33 + For WinterDesignDay, !- Field 35 + Until: 24:00,26.7, !- Field 36 + For: Sunday Holidays AllOtherDays, !- Field 38 + Until: 24:00,26.7; !- Field 39 + + + + Schedule:Compact, + MinOA_MotorizedDamper_Sched, !- Name + fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: Weekdays SummerDesignDay, !- Field 2 + Until: 07:00,0.0, !- Field 3 + Until: 22:00,1.0, !- Field 5 + Until: 24:00,0.0, !- Field 7 + For: Saturday WinterDesignDay, !- Field 9 + Until: 07:00,0.0, !- Field 10 + Until: 18:00,1.0, !- Field 12 + Until: 24:00,0.0, !- Field 14 + For: Sunday Holidays AllOtherDays, !- Field 16 + Until: 24:00,0.0; !- Field 17 + + + + Schedule:Compact, + MinOA_Sched, !- Name + fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,1.0; !- Field 3 + + + + Schedule:Compact, + Dual Zone Control Type Sched, !- Name + Control Type, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,4; !- Field 3 + + + + Schedule:Compact, + Cool-Supply-Air-Temp-Sch,!- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,12.8; !- Field 3 + + + + Schedule:Compact, + Heat-Supply-Air-Temp-Sch,!- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,12.8; !- Field 3 + + + + Schedule:Compact, + CW-Loop-Temp-Schedule, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,6.7; !- Field 3 + + + + Schedule:Compact, + HW-Loop-Temp-Schedule, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,82; !- Field 3 + + + + Schedule:Compact, + Tower-Loop-Temp-Schedule,!- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,21.1; !- Field 3 + + + + Schedule:Compact, + Core_bottom sub cat Latent fract sched, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,0.05; !- Field 3 + + + + Schedule:Compact, + Core_bottom sub cat Sensible fract sched, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,0.2; !- Field 3 + + + Schedule:Compact, + Core_bottom sub cat Temp Sched, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,60.0; !- Field 3 + + + + Schedule:Compact, + Core_bottom sub catHot Supply Temp Sched, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,55; !- Field 3 + + + + Schedule:Compact, + Core_mid sub cat Latent fract sched, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,0.05; !- Field 3 + + + + Schedule:Compact, + Core_mid sub cat Sensible fract sched, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,0.2; !- Field 3 + + + Schedule:Compact, + Core_mid sub cat Temp Sched, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,60.0; !- Field 3 + + + + Schedule:Compact, + Core_mid sub catHot Supply Temp Sched, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,55; !- Field 3 + + + + Schedule:Compact, + Core_top sub cat Latent fract sched, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,0.05; !- Field 3 + + + + Schedule:Compact, + Core_top sub cat Sensible fract sched, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,0.2; !- Field 3 + + + + Schedule:Compact, + Core_top sub cat Temp Sched, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,60.0; !- Field 3 + + + + Schedule:Compact, + Core_top sub catHot Supply Temp Sched, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,55; !- Field 3 + + + Schedule:Compact, + SHWSys1-Loop-Temp-Schedule, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,60; !- Field 3 + + + + Schedule:Compact, + SHWSys1 Water Heater Setpoint Temperature Schedule, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,60.0; !- Field 3 + + + + Schedule:Compact, + SHWSys1 Water Heater Ambient Temperature Schedule, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,22.0; !- Field 3 + +!- Addind Data Center Schedules + + + Schedule:Compact, + CLGSETP_DC_SCH, !- Name + Temperature, !- Schedule Type Limits Name + THROUGH: 12/31, !- Field 1 + FOR SummerDesignDay, !- Field 2 + UNTIL: 24:00,27, !- Field 3 + FOR WinterDesignDay, !- Field 5 + UNTIL: 24:00,27, !- Field 6 + FOR:AllOtherDays, !- Field 8 + UNTIL: 24:00,27; !- Field 9 + + + + Schedule:Compact, + HTGSETP_DC_SCH, !- Name + Temperature, !- Schedule Type Limits Name + THROUGH: 12/31, !- Field 1 + FOR:AllDays, !- Field 2 + UNTIL: 24:00,18; !- Field 3 + + + + Schedule:Compact, + PLANT LOOP HIGH TEMP SCHEDULE, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: Alldays, !- Field 2 + Until: 24:00,18.33; !- Field 3 + + + + Schedule:Compact, + PLANT LOOP LOW TEMP SCHEDULE, !- Name + Temperature, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: Alldays, !- Field 2 + Until: 24:00,5; !- Field 3 + + + + Schedule:Compact, + SupplyFanSch, !- Name + Fraction, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,1; !- Field 3 + + + + Schedule:Compact, + DC_MinRelHumSetSch, !- Name + Humidity, !- Schedule Type Limits Name + Through: 12/31, !- Field 1 + For: AllDays, !- Field 2 + Until: 24:00,30; !- Field 3 + +!- =========== ALL OBJECTS IN CLASS: PEOPLE =========== + + + People, + Basement, !- Name + Basement, !- Zone or ZoneList Name + BLDG_OCC_SCH, !- Number of People Schedule Name + Area/Person, !- Number of People Calculation Method + , !- Number of People + , !- People per Zone Floor Area {person/m2} + 18.5787942465724, !- Zone Floor Area per Person {m2/person} + 0.3000, !- Fraction Radiant + AUTOCALCULATE, !- Sensible Heat Fraction + ACTIVITY_SCH, !- Activity Level Schedule Name + , !- Carbon Dioxide Generation Rate {m3/s-W} + No, !- Enable ASHRAE 55 Comfort Warnings + ZoneAveraged, !- Mean Radiant Temperature Calculation Type + , !- Surface Name/Angle Factor List Name + WORK_EFF_SCH, !- Work Efficiency Schedule Name + CLOTHING_SCH, !- Clothing Insulation Schedule Name + AIR_VELO_SCH, !- Air Velocity Schedule Name + FANGER; !- Thermal Comfort Model 1 Type + + + + People, + Core_bottom, !- Name + Core_bottom, !- Zone or ZoneList Name + BLDG_OCC_SCH, !- Number of People Schedule Name + Area/Person, !- Number of People Calculation Method + , !- Number of People + , !- People per Zone Floor Area {person/m2} + 18.5787942465724, !- Zone Floor Area per Person {m2/person} + 0.3000, !- Fraction Radiant + AUTOCALCULATE, !- Sensible Heat Fraction + ACTIVITY_SCH, !- Activity Level Schedule Name + , !- Carbon Dioxide Generation Rate {m3/s-W} + No, !- Enable ASHRAE 55 Comfort Warnings + ZoneAveraged, !- Mean Radiant Temperature Calculation Type + , !- Surface Name/Angle Factor List Name + WORK_EFF_SCH, !- Work Efficiency Schedule Name + CLOTHING_SCH, !- Clothing Insulation Schedule Name + AIR_VELO_SCH, !- Air Velocity Schedule Name + FANGER; !- Thermal Comfort Model 1 Type + + + + People, + Core_mid, !- Name + Core_mid, !- Zone or ZoneList Name + BLDG_OCC_SCH, !- Number of People Schedule Name + Area/Person, !- Number of People Calculation Method + , !- Number of People + , !- People per Zone Floor Area {person/m2} + 18.5787942465724, !- Zone Floor Area per Person {m2/person} + 0.3000, !- Fraction Radiant + AUTOCALCULATE, !- Sensible Heat Fraction + ACTIVITY_SCH, !- Activity Level Schedule Name + , !- Carbon Dioxide Generation Rate {m3/s-W} + No, !- Enable ASHRAE 55 Comfort Warnings + ZoneAveraged, !- Mean Radiant Temperature Calculation Type + , !- Surface Name/Angle Factor List Name + WORK_EFF_SCH, !- Work Efficiency Schedule Name + CLOTHING_SCH, !- Clothing Insulation Schedule Name + AIR_VELO_SCH, !- Air Velocity Schedule Name + FANGER; !- Thermal Comfort Model 1 Type + + + + People, + Core_top, !- Name + Core_top, !- Zone or ZoneList Name + BLDG_OCC_SCH, !- Number of People Schedule Name + Area/Person, !- Number of People Calculation Method + , !- Number of People + , !- People per Zone Floor Area {person/m2} + 18.5787942465724, !- Zone Floor Area per Person {m2/person} + 0.3000, !- Fraction Radiant + AUTOCALCULATE, !- Sensible Heat Fraction + ACTIVITY_SCH, !- Activity Level Schedule Name + , !- Carbon Dioxide Generation Rate {m3/s-W} + No, !- Enable ASHRAE 55 Comfort Warnings + ZoneAveraged, !- Mean Radiant Temperature Calculation Type + , !- Surface Name/Angle Factor List Name + WORK_EFF_SCH, !- Work Efficiency Schedule Name + CLOTHING_SCH, !- Clothing Insulation Schedule Name + AIR_VELO_SCH, !- Air Velocity Schedule Name + FANGER; !- Thermal Comfort Model 1 Type + + + + People, + Perimeter_bot_ZN_3, !- Name + Perimeter_bot_ZN_3, !- Zone or ZoneList Name + BLDG_OCC_SCH, !- Number of People Schedule Name + Area/Person, !- Number of People Calculation Method + , !- Number of People + , !- People per Zone Floor Area {person/m2} + 18.5787942465724, !- Zone Floor Area per Person {m2/person} + 0.3000, !- Fraction Radiant + AUTOCALCULATE, !- Sensible Heat Fraction + ACTIVITY_SCH, !- Activity Level Schedule Name + , !- Carbon Dioxide Generation Rate {m3/s-W} + No, !- Enable ASHRAE 55 Comfort Warnings + ZoneAveraged, !- Mean Radiant Temperature Calculation Type + , !- Surface Name/Angle Factor List Name + WORK_EFF_SCH, !- Work Efficiency Schedule Name + CLOTHING_SCH, !- Clothing Insulation Schedule Name + AIR_VELO_SCH, !- Air Velocity Schedule Name + FANGER; !- Thermal Comfort Model 1 Type + + + + People, + Perimeter_bot_ZN_2, !- Name + Perimeter_bot_ZN_2, !- Zone or ZoneList Name + BLDG_OCC_SCH, !- Number of People Schedule Name + Area/Person, !- Number of People Calculation Method + , !- Number of People + , !- People per Zone Floor Area {person/m2} + 18.5787942465724, !- Zone Floor Area per Person {m2/person} + 0.3000, !- Fraction Radiant + AUTOCALCULATE, !- Sensible Heat Fraction + ACTIVITY_SCH, !- Activity Level Schedule Name + , !- Carbon Dioxide Generation Rate {m3/s-W} + No, !- Enable ASHRAE 55 Comfort Warnings + ZoneAveraged, !- Mean Radiant Temperature Calculation Type + , !- Surface Name/Angle Factor List Name + WORK_EFF_SCH, !- Work Efficiency Schedule Name + CLOTHING_SCH, !- Clothing Insulation Schedule Name + AIR_VELO_SCH, !- Air Velocity Schedule Name + FANGER; !- Thermal Comfort Model 1 Type + + + + People, + Perimeter_bot_ZN_1, !- Name + Perimeter_bot_ZN_1, !- Zone or ZoneList Name + BLDG_OCC_SCH, !- Number of People Schedule Name + Area/Person, !- Number of People Calculation Method + , !- Number of People + , !- People per Zone Floor Area {person/m2} + 18.5787942465724, !- Zone Floor Area per Person {m2/person} + 0.3000, !- Fraction Radiant + AUTOCALCULATE, !- Sensible Heat Fraction + ACTIVITY_SCH, !- Activity Level Schedule Name + , !- Carbon Dioxide Generation Rate {m3/s-W} + No, !- Enable ASHRAE 55 Comfort Warnings + ZoneAveraged, !- Mean Radiant Temperature Calculation Type + , !- Surface Name/Angle Factor List Name + WORK_EFF_SCH, !- Work Efficiency Schedule Name + CLOTHING_SCH, !- Clothing Insulation Schedule Name + AIR_VELO_SCH, !- Air Velocity Schedule Name + FANGER; !- Thermal Comfort Model 1 Type + + + + People, + Perimeter_bot_ZN_4, !- Name + Perimeter_bot_ZN_4, !- Zone or ZoneList Name + BLDG_OCC_SCH, !- Number of People Schedule Name + Area/Person, !- Number of People Calculation Method + , !- Number of People + , !- People per Zone Floor Area {person/m2} + 18.5787942465724, !- Zone Floor Area per Person {m2/person} + 0.3000, !- Fraction Radiant + AUTOCALCULATE, !- Sensible Heat Fraction + ACTIVITY_SCH, !- Activity Level Schedule Name + , !- Carbon Dioxide Generation Rate {m3/s-W} + No, !- Enable ASHRAE 55 Comfort Warnings + ZoneAveraged, !- Mean Radiant Temperature Calculation Type + , !- Surface Name/Angle Factor List Name + WORK_EFF_SCH, !- Work Efficiency Schedule Name + CLOTHING_SCH, !- Clothing Insulation Schedule Name + AIR_VELO_SCH, !- Air Velocity Schedule Name + FANGER; !- Thermal Comfort Model 1 Type + + + + People, + Perimeter_mid_ZN_3, !- Name + Perimeter_mid_ZN_3, !- Zone or ZoneList Name + BLDG_OCC_SCH, !- Number of People Schedule Name + Area/Person, !- Number of People Calculation Method + , !- Number of People + , !- People per Zone Floor Area {person/m2} + 18.5787942465724, !- Zone Floor Area per Person {m2/person} + 0.3000, !- Fraction Radiant + AUTOCALCULATE, !- Sensible Heat Fraction + ACTIVITY_SCH, !- Activity Level Schedule Name + , !- Carbon Dioxide Generation Rate {m3/s-W} + No, !- Enable ASHRAE 55 Comfort Warnings + ZoneAveraged, !- Mean Radiant Temperature Calculation Type + , !- Surface Name/Angle Factor List Name + WORK_EFF_SCH, !- Work Efficiency Schedule Name + CLOTHING_SCH, !- Clothing Insulation Schedule Name + AIR_VELO_SCH, !- Air Velocity Schedule Name + FANGER; !- Thermal Comfort Model 1 Type + + + + People, + Perimeter_mid_ZN_2, !- Name + Perimeter_mid_ZN_2, !- Zone or ZoneList Name + BLDG_OCC_SCH, !- Number of People Schedule Name + Area/Person, !- Number of People Calculation Method + , !- Number of People + , !- People per Zone Floor Area {person/m2} + 18.5787942465724, !- Zone Floor Area per Person {m2/person} + 0.3000, !- Fraction Radiant + AUTOCALCULATE, !- Sensible Heat Fraction + ACTIVITY_SCH, !- Activity Level Schedule Name + , !- Carbon Dioxide Generation Rate {m3/s-W} + No, !- Enable ASHRAE 55 Comfort Warnings + ZoneAveraged, !- Mean Radiant Temperature Calculation Type + , !- Surface Name/Angle Factor List Name + WORK_EFF_SCH, !- Work Efficiency Schedule Name + CLOTHING_SCH, !- Clothing Insulation Schedule Name + AIR_VELO_SCH, !- Air Velocity Schedule Name + FANGER; !- Thermal Comfort Model 1 Type + + + + People, + Perimeter_mid_ZN_1, !- Name + Perimeter_mid_ZN_1, !- Zone or ZoneList Name + BLDG_OCC_SCH, !- Number of People Schedule Name + Area/Person, !- Number of People Calculation Method + , !- Number of People + , !- People per Zone Floor Area {person/m2} + 18.5787942465724, !- Zone Floor Area per Person {m2/person} + 0.3000, !- Fraction Radiant + AUTOCALCULATE, !- Sensible Heat Fraction + ACTIVITY_SCH, !- Activity Level Schedule Name + , !- Carbon Dioxide Generation Rate {m3/s-W} + No, !- Enable ASHRAE 55 Comfort Warnings + ZoneAveraged, !- Mean Radiant Temperature Calculation Type + , !- Surface Name/Angle Factor List Name + WORK_EFF_SCH, !- Work Efficiency Schedule Name + CLOTHING_SCH, !- Clothing Insulation Schedule Name + AIR_VELO_SCH, !- Air Velocity Schedule Name + FANGER; !- Thermal Comfort Model 1 Type + + + + People, + Perimeter_mid_ZN_4, !- Name + Perimeter_mid_ZN_4, !- Zone or ZoneList Name + BLDG_OCC_SCH, !- Number of People Schedule Name + Area/Person, !- Number of People Calculation Method + , !- Number of People + , !- People per Zone Floor Area {person/m2} + 18.5787942465724, !- Zone Floor Area per Person {m2/person} + 0.3000, !- Fraction Radiant + AUTOCALCULATE, !- Sensible Heat Fraction + ACTIVITY_SCH, !- Activity Level Schedule Name + , !- Carbon Dioxide Generation Rate {m3/s-W} + No, !- Enable ASHRAE 55 Comfort Warnings + ZoneAveraged, !- Mean Radiant Temperature Calculation Type + , !- Surface Name/Angle Factor List Name + WORK_EFF_SCH, !- Work Efficiency Schedule Name + CLOTHING_SCH, !- Clothing Insulation Schedule Name + AIR_VELO_SCH, !- Air Velocity Schedule Name + FANGER; !- Thermal Comfort Model 1 Type + + + + People, + Perimeter_top_ZN_3, !- Name + Perimeter_top_ZN_3, !- Zone or ZoneList Name + BLDG_OCC_SCH, !- Number of People Schedule Name + Area/Person, !- Number of People Calculation Method + , !- Number of People + , !- People per Zone Floor Area {person/m2} + 18.5787942465724, !- Zone Floor Area per Person {m2/person} + 0.3000, !- Fraction Radiant + AUTOCALCULATE, !- Sensible Heat Fraction + ACTIVITY_SCH, !- Activity Level Schedule Name + , !- Carbon Dioxide Generation Rate {m3/s-W} + No, !- Enable ASHRAE 55 Comfort Warnings + ZoneAveraged, !- Mean Radiant Temperature Calculation Type + , !- Surface Name/Angle Factor List Name + WORK_EFF_SCH, !- Work Efficiency Schedule Name + CLOTHING_SCH, !- Clothing Insulation Schedule Name + AIR_VELO_SCH, !- Air Velocity Schedule Name + FANGER; !- Thermal Comfort Model 1 Type + + + + People, + Perimeter_top_ZN_2, !- Name + Perimeter_top_ZN_2, !- Zone or ZoneList Name + BLDG_OCC_SCH, !- Number of People Schedule Name + Area/Person, !- Number of People Calculation Method + , !- Number of People + , !- People per Zone Floor Area {person/m2} + 18.5787942465724, !- Zone Floor Area per Person {m2/person} + 0.3000, !- Fraction Radiant + AUTOCALCULATE, !- Sensible Heat Fraction + ACTIVITY_SCH, !- Activity Level Schedule Name + , !- Carbon Dioxide Generation Rate {m3/s-W} + No, !- Enable ASHRAE 55 Comfort Warnings + ZoneAveraged, !- Mean Radiant Temperature Calculation Type + , !- Surface Name/Angle Factor List Name + WORK_EFF_SCH, !- Work Efficiency Schedule Name + CLOTHING_SCH, !- Clothing Insulation Schedule Name + AIR_VELO_SCH, !- Air Velocity Schedule Name + FANGER; !- Thermal Comfort Model 1 Type + + + + People, + Perimeter_top_ZN_1, !- Name + Perimeter_top_ZN_1, !- Zone or ZoneList Name + BLDG_OCC_SCH, !- Number of People Schedule Name + Area/Person, !- Number of People Calculation Method + , !- Number of People + , !- People per Zone Floor Area {person/m2} + 18.5787942465724, !- Zone Floor Area per Person {m2/person} + 0.3000, !- Fraction Radiant + AUTOCALCULATE, !- Sensible Heat Fraction + ACTIVITY_SCH, !- Activity Level Schedule Name + , !- Carbon Dioxide Generation Rate {m3/s-W} + No, !- Enable ASHRAE 55 Comfort Warnings + ZoneAveraged, !- Mean Radiant Temperature Calculation Type + , !- Surface Name/Angle Factor List Name + WORK_EFF_SCH, !- Work Efficiency Schedule Name + CLOTHING_SCH, !- Clothing Insulation Schedule Name + AIR_VELO_SCH, !- Air Velocity Schedule Name + FANGER; !- Thermal Comfort Model 1 Type + + + + People, + Perimeter_top_ZN_4, !- Name + Perimeter_top_ZN_4, !- Zone or ZoneList Name + BLDG_OCC_SCH, !- Number of People Schedule Name + Area/Person, !- Number of People Calculation Method + , !- Number of People + , !- People per Zone Floor Area {person/m2} + 18.5787942465724, !- Zone Floor Area per Person {m2/person} + 0.3000, !- Fraction Radiant + AUTOCALCULATE, !- Sensible Heat Fraction + ACTIVITY_SCH, !- Activity Level Schedule Name + , !- Carbon Dioxide Generation Rate {m3/s-W} + No, !- Enable ASHRAE 55 Comfort Warnings + ZoneAveraged, !- Mean Radiant Temperature Calculation Type + , !- Surface Name/Angle Factor List Name + WORK_EFF_SCH, !- Work Efficiency Schedule Name + CLOTHING_SCH, !- Clothing Insulation Schedule Name + AIR_VELO_SCH, !- Air Velocity Schedule Name + FANGER; !- Thermal Comfort Model 1 Type + +!- =========== ALL OBJECTS IN CLASS: LIGHTS =========== + + + Lights, + Basement_Lights, !- Name + Basement, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 8.503489229, !- Watts per Zone Floor Area {W/m + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + General Lights, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + + + + Lights, + Core_bottom_Lights, !- Name + Core_bottom, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 8.503489229, !- Watts per Zone Floor Area {W/m + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + General Lights, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + + + + Lights, + Core_mid_Lights, !- Name + Core_mid, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 8.503489229, !- Watts per Zone Floor Area {W/m + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + General Lights, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + + + + Lights, + Core_top_Lights, !- Name + Core_top, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 8.503489229, !- Watts per Zone Floor Area {W/m + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + General Lights, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + + + + Lights, + Perimeter_bot_ZN_3_Lights, !- Name + Perimeter_bot_ZN_3, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 8.503489229, !- Watts per Zone Floor Area {W/m + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + General Lights, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + + + + Lights, + Perimeter_bot_ZN_2_Lights, !- Name + Perimeter_bot_ZN_2, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 8.503489229, !- Watts per Zone Floor Area {W/m + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + General Lights, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + + + + Lights, + Perimeter_bot_ZN_1_Lights, !- Name + Perimeter_bot_ZN_1, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 8.503489229, !- Watts per Zone Floor Area {W/m + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + General Lights, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + + + + Lights, + Perimeter_bot_ZN_4_Lights, !- Name + Perimeter_bot_ZN_4, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 8.503489229, !- Watts per Zone Floor Area {W/m + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + General Lights, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + + + + Lights, + Perimeter_mid_ZN_3_Lights, !- Name + Perimeter_mid_ZN_3, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 8.503489229, !- Watts per Zone Floor Area {W/m + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + General Lights, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + + + + Lights, + Perimeter_mid_ZN_2_Lights, !- Name + Perimeter_mid_ZN_2, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 8.503489229, !- Watts per Zone Floor Area {W/m + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + General Lights, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + + + + Lights, + Perimeter_mid_ZN_1_Lights, !- Name + Perimeter_mid_ZN_1, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 8.503489229, !- Watts per Zone Floor Area {W/m + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + General Lights, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + + + + Lights, + Perimeter_mid_ZN_4_Lights, !- Name + Perimeter_mid_ZN_4, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 8.503489229, !- Watts per Zone Floor Area {W/m + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + General Lights, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + + + + Lights, + Perimeter_top_ZN_3_Lights, !- Name + Perimeter_top_ZN_3, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 8.503489229, !- Watts per Zone Floor Area {W/m + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + General Lights, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + + + + Lights, + Perimeter_top_ZN_2_Lights, !- Name + Perimeter_top_ZN_2, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 8.503489229, !- Watts per Zone Floor Area {W/m + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + General Lights, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + + + + Lights, + Perimeter_top_ZN_1_Lights, !- Name + Perimeter_top_ZN_1, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 8.503489229, !- Watts per Zone Floor Area {W/m + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + General Lights, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + + + + Lights, + Perimeter_top_ZN_4_Lights, !- Name + Perimeter_top_ZN_4, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 8.503489229, !- Watts per Zone Floor Area {W/m + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + General Lights, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + +!- Adding Lights for 4 datacenter Zones +!- At same level as entire office. + + + Lights, + DataCenter_Basement_Lights, !- Name + DataCenter_basement_ZN_6, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 8.503489229, !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + DataCenter_Lights, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + + + + Lights, + DataCenter_bot_Lights, !- Name + DataCenter_bot_ZN_6, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 8.503489229, !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + DataCenter_Lights, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + + + + Lights, + DataCenter_mid_Lights, !- Name + DataCenter_mid_ZN_6, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 8.503489229, !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + DataCenter_Lights, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + + + + Lights, + DataCenter_top_Lights, !- Name + DataCenter_top_ZN_6, !- Zone or ZoneList Name + BLDG_LIGHT_SCH, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + , !- Lighting Level {W} + 8.503489229, !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Return Air Fraction + 0.7000, !- Fraction Radiant + 0.2000, !- Fraction Visible + 1.0000, !- Fraction Replaceable + DataCenter_Lights, !- End-Use Subcategory + No; !- Return Air Fraction Calculated from Plenum Temperature + +!- =========== ALL OBJECTS IN CLASS: ELECTRIC EQUIPMENT =========== + + + ElectricEquipment, + Basement_MiscPlug_Equip, !- Name + Basement, !- Zone or ZoneList Name + Always_on, !- Schedule Name + EquipmentLevel, !- Design Level Calculation Method + 13457.544, !- Design Level {W} + , !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Fraction Latent + 0.5000, !- Fraction Radiant + 0.0000, !- Fraction Lost + MiscPlug; !- End-Use Subcategory + + + + ElectricEquipment, + Core_bottom_MiscPlug_Equip, !- Name + Core_bottom, !- Zone or ZoneList Name + BLDG_EQUIP_SCH, !- Schedule Name + EquipmentLevel, !- Design Level Calculation Method + 20142.877, !- Design Level {W} + , !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Fraction Latent + 0.5000, !- Fraction Radiant + 0.0000, !- Fraction Lost + MiscPlug; !- End-Use Subcategory + + + + ElectricEquipment, + Core_mid_MiscPlug_Equip, !- Name + Core_mid, !- Zone or ZoneList Name + BLDG_EQUIP_SCH, !- Schedule Name + EquipmentLevel, !- Design Level Calculation Method + 20142.8, !- Design Level {W} + , !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Fraction Latent + 0.5000, !- Fraction Radiant + 0.0000, !- Fraction Lost + MiscPlug; !- End-Use Subcategory + + + + ElectricEquipment, + Core_top_MiscPlug_Equip, !- Name + Core_top, !- Zone or ZoneList Name + BLDG_EQUIP_SCH, !- Schedule Name + EquipmentLevel, !- Design Level Calculation Method + 20142.8, !- Design Level {W} + , !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Fraction Latent + 0.5000, !- Fraction Radiant + 0.0000, !- Fraction Lost + MiscPlug; !- End-Use Subcategory + + + + ElectricEquipment, + Perimeter_bot_ZN_3_MiscPlug_Equip, !- Name + Perimeter_bot_ZN_3, !- Zone or ZoneList Name + BLDG_EQUIP_SCH, !- Schedule Name + EquipmentLevel, !- Design Level Calculation Method + 2529.2421, !- Design Level {W} + , !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Fraction Latent + 0.5000, !- Fraction Radiant + 0.0000, !- Fraction Lost + MiscPlug; !- End-Use Subcategory + + + + ElectricEquipment, + Perimeter_bot_ZN_2_MiscPlug_Equip, !- Name + Perimeter_bot_ZN_2, !- Zone or ZoneList Name + BLDG_EQUIP_SCH, !- Schedule Name + EquipmentLevel, !- Design Level Calculation Method + 1629.9400, !- Design Level {W} + , !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Fraction Latent + 0.5000, !- Fraction Radiant + 0.0000, !- Fraction Lost + MiscPlug; !- End-Use Subcategory + + + + ElectricEquipment, + Perimeter_bot_ZN_1_MiscPlug_Equip, !- Name + Perimeter_bot_ZN_1, !- Zone or ZoneList Name + BLDG_EQUIP_SCH, !- Schedule Name + EquipmentLevel, !- Design Level Calculation Method + 2529.2809, !- Design Level {W} + , !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Fraction Latent + 0.5000, !- Fraction Radiant + 0.0000, !- Fraction Lost + MiscPlug; !- End-Use Subcategory + + + + ElectricEquipment, + Perimeter_bot_ZN_4_MiscPlug_Equip, !- Name + Perimeter_bot_ZN_4, !- Zone or ZoneList Name + BLDG_EQUIP_SCH, !- Schedule Name + EquipmentLevel, !- Design Level Calculation Method + 1629.9293, !- Design Level {W} + , !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Fraction Latent + 0.5000, !- Fraction Radiant + 0.0000, !- Fraction Lost + MiscPlug; !- End-Use Subcategory + + + + ElectricEquipment, + Perimeter_mid_ZN_3_MiscPlug_Equip, !- Name + Perimeter_mid_ZN_3, !- Zone or ZoneList Name + BLDG_EQUIP_SCH, !- Schedule Name + EquipmentLevel, !- Design Level Calculation Method + 2529.2421, !- Design Level {W} + , !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Fraction Latent + 0.5000, !- Fraction Radiant + 0.0000, !- Fraction Lost + MiscPlug; !- End-Use Subcategory + + + + ElectricEquipment, + Perimeter_mid_ZN_2_MiscPlug_Equip, !- Name + Perimeter_mid_ZN_2, !- Zone or ZoneList Name + BLDG_EQUIP_SCH, !- Schedule Name + EquipmentLevel, !- Design Level Calculation Method + 1629.9400, !- Design Level {W} + , !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Fraction Latent + 0.5000, !- Fraction Radiant + 0.0000, !- Fraction Lost + MiscPlug; !- End-Use Subcategory + + + + ElectricEquipment, + Perimeter_mid_ZN_1_MiscPlug_Equip, !- Name + Perimeter_mid_ZN_1, !- Zone or ZoneList Name + BLDG_EQUIP_SCH, !- Schedule Name + EquipmentLevel, !- Design Level Calculation Method + 2529.2809, !- Design Level {W} + , !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Fraction Latent + 0.5000, !- Fraction Radiant + 0.0000, !- Fraction Lost + MiscPlug; !- End-Use Subcategory + + + + ElectricEquipment, + Perimeter_mid_ZN_4_MiscPlug_Equip, !- Name + Perimeter_mid_ZN_4, !- Zone or ZoneList Name + BLDG_EQUIP_SCH, !- Schedule Name + EquipmentLevel, !- Design Level Calculation Method + 1629.9293, !- Design Level {W} + , !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Fraction Latent + 0.5000, !- Fraction Radiant + 0.0000, !- Fraction Lost + MiscPlug; !- End-Use Subcategory + + + + ElectricEquipment, + Perimeter_top_ZN_3_MiscPlug_Equip, !- Name + Perimeter_top_ZN_3, !- Zone or ZoneList Name + BLDG_EQUIP_SCH, !- Schedule Name + EquipmentLevel, !- Design Level Calculation Method + 2529.2421, !- Design Level {W} + , !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Fraction Latent + 0.5000, !- Fraction Radiant + 0.0000, !- Fraction Lost + MiscPlug; !- End-Use Subcategory + + + + ElectricEquipment, + Perimeter_top_ZN_2_MiscPlug_Equip, !- Name + Perimeter_top_ZN_2, !- Zone or ZoneList Name + BLDG_EQUIP_SCH, !- Schedule Name + EquipmentLevel, !- Design Level Calculation Method + 1629.9400, !- Design Level {W} + , !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Fraction Latent + 0.5000, !- Fraction Radiant + 0.0000, !- Fraction Lost + MiscPlug; !- End-Use Subcategory + + + + ElectricEquipment, + Perimeter_top_ZN_1_MiscPlug_Equip, !- Name + Perimeter_top_ZN_1, !- Zone or ZoneList Name + BLDG_EQUIP_SCH, !- Schedule Name + EquipmentLevel, !- Design Level Calculation Method + 2529.2809, !- Design Level {W} + , !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Fraction Latent + 0.5000, !- Fraction Radiant + 0.0000, !- Fraction Lost + MiscPlug; !- End-Use Subcategory + + + + ElectricEquipment, + Perimeter_top_ZN_4_MiscPlug_Equip, !- Name + Perimeter_top_ZN_4, !- Zone or ZoneList Name + BLDG_EQUIP_SCH, !- Schedule Name + EquipmentLevel, !- Design Level Calculation Method + 1629.9293, !- Design Level {W} + , !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Fraction Latent + 0.5000, !- Fraction Radiant + 0.0000, !- Fraction Lost + MiscPlug; !- End-Use Subcategory + + + ElectricEquipment, + DataCenter_Basement_MiscPlug_Equip, !- Name + DataCenter_basement_ZN_6,!- Zone or ZoneList Name + ALWAYS_ON, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + 0, !- Design Level {W} + 484.423246742185, !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Fraction Latent + 0.1000, !- Fraction Radiant + 0.0000, !- Fraction Lost + DataCenter_PlugLoads; !- End-Use Subcategory + + + + ElectricEquipment, + DataCenter_bot_MiscPlug_Equip, !- Name + DataCenter_bot_ZN_6, !- Zone or ZoneList Name + ALWAYS_ON, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + 0, !- Design Level {W} + 215.299220774304, !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Fraction Latent + 0.1000, !- Fraction Radiant + 0.0000, !- Fraction Lost + DataCenter_PlugLoads; !- End-Use Subcategory + + + + ElectricEquipment, + DataCenter_mid_MiscPlug_Equip, !- Name + DataCenter_mid_ZN_6, !- Zone or ZoneList Name + ALWAYS_ON, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + 0, !- Design Level {W} + 215.299220774304, !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Fraction Latent + 0.1000, !- Fraction Radiant + 0.0000, !- Fraction Lost + DataCenter_PlugLoads; !- End-Use Subcategory + + + + ElectricEquipment, + DataCenter_top_MiscPlug_Equip, !- Name + DataCenter_top_ZN_6, !- Zone or ZoneList Name + ALWAYS_ON, !- Schedule Name + Watts/Area, !- Design Level Calculation Method + 0, !- Design Level {W} + 215.299220774304, !- Watts per Zone Floor Area {W/m2} + , !- Watts per Person {W/person} + 0.0000, !- Fraction Latent + 0.1000, !- Fraction Radiant + 0.0000, !- Fraction Lost + DataCenter_PlugLoads; !- End-Use Subcategory + + + + Exterior:FuelEquipment, + Elevators, !- Name + Electricity, !- Fuel Use Type + BLDG_ELEVATORS, !- Schedule Name + 244443.956043956, !- Design Level {W} + MiscPlug; !- End-Use Subcategory + + + + Exterior:FuelEquipment, + Elevators_Lights_Fan, !- Name + Electricity, !- Fuel Use Type + ELEV_LIGHT_FAN_SCH_ADD_DF, !- Schedule Name + 752, !- Design Level {W} + MiscPlug; !- End-Use Subcategory + +!- =========== ALL OBJECTS IN CLASS: EXTERIORLIGHTS =========== + +Exterior:Lights, + Exterior_Lights_a, !- Name + Exterior_lighting_schedule_a, !- Schedule Name + 12979.2, !- Design Level {W} + AstronomicalClock, !- Control Option + General; !- End-Use Subcategory + +Exterior:Lights, + Exterior_Lights_b, !- Name + Exterior_lighting_schedule_b_2016, !- Schedule Name + 968.1, !- Design Level {W} + AstronomicalClock, !- Control Option + General; !- End-Use Subcategory + +Exterior:Lights, + Exterior_Lights_c, !- Name + Exterior_lighting_schedule_c_2016, !- Schedule Name + 26026.9, !- Design Level {W} + AstronomicalClock, !- Control Option + General; !- End-Use Subcategory + + + +!- =========== ALL OBJECTS IN CLASS: DAYLIGHTING:DETAILED =========== + +! +!Addendum AY sidelighting. +! + + + + +Daylighting:Controls, + Perimeter_bot_ZN_1, !- Zone Name + 2, !- Total Daylighting Reference Points + 36.576000, !- X-Coordinate of First Reference Point {m} + 1.676400, !- Y-Coordinate of First Reference Point {m} + 0.762000, !- Z-Coordinate of First Reference Point {m} + 36.576000, !- X-Coordinate of Second Reference Point {m} + 3.352800, !- Y-Coordinate of Second Reference Point {m} + 0.762000, !- Z-Coordinate of Second Reference Point {m} + 0.3857, !- Fraction of Zone Controlled by First Reference Point + 0.1385, !- Fraction of Zone Controlled by Second Reference Point + 375.0, !- Illuminance Setpoint at First Reference Point {lux} + 375.0, !- Illuminance Setpoint at Second Reference Point {lux} + 2, !- Lighting Control Type + 180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} + 22.0, !- Maximum Allowable Discomfort Glare Index + 0.3, !- Minimum Input Power Fraction for Continuous Dimming Control + 0.2, !- Minimum Light Output Fraction for Continuous Dimming Control + 3, !- Number of Stepped Control Steps + 1.0; !- Probability Lighting will be Reset When Needed in Manual Stepped Control + + + + + + + + + +Daylighting:Controls, + Perimeter_bot_ZN_2, !- Zone Name + 2, !- Total Daylighting Reference Points + 71.430800, !- X-Coordinate of First Reference Point {m} + 24.384000, !- Y-Coordinate of First Reference Point {m} + 0.762000, !- Z-Coordinate of First Reference Point {m} + 69.754400, !- X-Coordinate of Second Reference Point {m} + 24.384000, !- Y-Coordinate of Second Reference Point {m} + 0.762000, !- Z-Coordinate of Second Reference Point {m} + 0.3857, !- Fraction of Zone Controlled by First Reference Point + 0.1385, !- Fraction of Zone Controlled by Second Reference Point + 375.0, !- Illuminance Setpoint at First Reference Point {lux} + 375.0, !- Illuminance Setpoint at Second Reference Point {lux} + 2, !- Lighting Control Type + 90.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} + 22.0, !- Maximum Allowable Discomfort Glare Index + 0.3, !- Minimum Input Power Fraction for Continuous Dimming Control + 0.2, !- Minimum Light Output Fraction for Continuous Dimming Control + 3, !- Number of Stepped Control Steps + 1.0; !- Probability Lighting will be Reset When Needed in Manual Stepped Control + + + + + + + + + +Daylighting:Controls, + Perimeter_bot_ZN_3, !- Zone Name + 2, !- Total Daylighting Reference Points + 36.576000, !- X-Coordinate of First Reference Point {m} + 47.061700, !- Y-Coordinate of First Reference Point {m} + 0.762000, !- Z-Coordinate of First Reference Point {m} + 36.576000, !- X-Coordinate of Second Reference Point {m} + 45.384700, !- Y-Coordinate of Second Reference Point {m} + 0.762000, !- Z-Coordinate of Second Reference Point {m} + 0.3857, !- Fraction of Zone Controlled by First Reference Point + 0.1385, !- Fraction of Zone Controlled by Second Reference Point + 375.0, !- Illuminance Setpoint at First Reference Point {lux} + 375.0, !- Illuminance Setpoint at Second Reference Point {lux} + 2, !- Lighting Control Type + 0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} + 22.0, !- Maximum Allowable Discomfort Glare Index + 0.3, !- Minimum Input Power Fraction for Continuous Dimming Control + 0.2, !- Minimum Light Output Fraction for Continuous Dimming Control + 3, !- Number of Stepped Control Steps + 1.0; !- Probability Lighting will be Reset When Needed in Manual Stepped Control + + + + + + + + + +Daylighting:Controls, + Perimeter_bot_ZN_4, !- Zone Name + 2, !- Total Daylighting Reference Points + 1.676400, !- X-Coordinate of First Reference Point {m} + 24.384000, !- Y-Coordinate of First Reference Point {m} + 0.762000, !- Z-Coordinate of First Reference Point {m} + 3.352800, !- X-Coordinate of Second Reference Point {m} + 24.384000, !- Y-Coordinate of Second Reference Point {m} + 0.762000, !- Z-Coordinate of Second Reference Point {m} + 0.3857, !- Fraction of Zone Controlled by First Reference Point + 0.1385, !- Fraction of Zone Controlled by Second Reference Point + 375.0, !- Illuminance Setpoint at First Reference Point {lux} + 375.0, !- Illuminance Setpoint at Second Reference Point {lux} + 2, !- Lighting Control Type + 270.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} + 22.0, !- Maximum Allowable Discomfort Glare Index + 0.3, !- Minimum Input Power Fraction for Continuous Dimming Control + 0.2, !- Minimum Light Output Fraction for Continuous Dimming Control + 3, !- Number of Stepped Control Steps + 1.0; !- Probability Lighting will be Reset When Needed in Manual Stepped Control + + + + + + + + + +Daylighting:Controls, + Perimeter_mid_ZN_1, !- Zone Name + 2, !- Total Daylighting Reference Points + 36.576000, !- X-Coordinate of First Reference Point {m} + 1.676400, !- Y-Coordinate of First Reference Point {m} + 17.526000, !- Z-Coordinate of First Reference Point {m} + 36.576000, !- X-Coordinate of Second Reference Point {m} + 3.352800, !- Y-Coordinate of Second Reference Point {m} + 17.526000, !- Z-Coordinate of Second Reference Point {m} + 0.3857, !- Fraction of Zone Controlled by First Reference Point + 0.1385, !- Fraction of Zone Controlled by Second Reference Point + 375.0, !- Illuminance Setpoint at First Reference Point {lux} + 375.0, !- Illuminance Setpoint at Second Reference Point {lux} + 2, !- Lighting Control Type + 180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} + 22.0, !- Maximum Allowable Discomfort Glare Index + 0.3, !- Minimum Input Power Fraction for Continuous Dimming Control + 0.2, !- Minimum Light Output Fraction for Continuous Dimming Control + 3, !- Number of Stepped Control Steps + 1.0; !- Probability Lighting will be Reset When Needed in Manual Stepped Control + + + + + + + + + +Daylighting:Controls, + Perimeter_mid_ZN_2, !- Zone Name + 2, !- Total Daylighting Reference Points + 71.430800, !- X-Coordinate of First Reference Point {m} + 24.384000, !- Y-Coordinate of First Reference Point {m} + 17.526000, !- Z-Coordinate of First Reference Point {m} + 69.754400, !- X-Coordinate of Second Reference Point {m} + 24.384000, !- Y-Coordinate of Second Reference Point {m} + 17.526000, !- Z-Coordinate of Second Reference Point {m} + 0.3857, !- Fraction of Zone Controlled by First Reference Point + 0.1385, !- Fraction of Zone Controlled by Second Reference Point + 375.0, !- Illuminance Setpoint at First Reference Point {lux} + 375.0, !- Illuminance Setpoint at Second Reference Point {lux} + 2, !- Lighting Control Type + 90.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} + 22.0, !- Maximum Allowable Discomfort Glare Index + 0.3, !- Minimum Input Power Fraction for Continuous Dimming Control + 0.2, !- Minimum Light Output Fraction for Continuous Dimming Control + 3, !- Number of Stepped Control Steps + 1.0; !- Probability Lighting will be Reset When Needed in Manual Stepped Control + + + + + + + + + +Daylighting:Controls, + Perimeter_mid_ZN_3, !- Zone Name + 2, !- Total Daylighting Reference Points + 36.576000, !- X-Coordinate of First Reference Point {m} + 47.061700, !- Y-Coordinate of First Reference Point {m} + 17.526000, !- Z-Coordinate of First Reference Point {m} + 36.576000, !- X-Coordinate of Second Reference Point {m} + 45.384700, !- Y-Coordinate of Second Reference Point {m} + 17.526000, !- Z-Coordinate of Second Reference Point {m} + 0.3857, !- Fraction of Zone Controlled by First Reference Point + 0.1385, !- Fraction of Zone Controlled by Second Reference Point + 375.0, !- Illuminance Setpoint at First Reference Point {lux} + 375.0, !- Illuminance Setpoint at Second Reference Point {lux} + 2, !- Lighting Control Type + 0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} + 22.0, !- Maximum Allowable Discomfort Glare Index + 0.3, !- Minimum Input Power Fraction for Continuous Dimming Control + 0.2, !- Minimum Light Output Fraction for Continuous Dimming Control + 3, !- Number of Stepped Control Steps + 1.0; !- Probability Lighting will be Reset When Needed in Manual Stepped Control + + + + + + + + + +Daylighting:Controls, + Perimeter_mid_ZN_4, !- Zone Name + 2, !- Total Daylighting Reference Points + 1.676400, !- X-Coordinate of First Reference Point {m} + 24.384000, !- Y-Coordinate of First Reference Point {m} + 17.526000, !- Z-Coordinate of First Reference Point {m} + 3.352800, !- X-Coordinate of Second Reference Point {m} + 24.384000, !- Y-Coordinate of Second Reference Point {m} + 17.526000, !- Z-Coordinate of Second Reference Point {m} + 0.3857, !- Fraction of Zone Controlled by First Reference Point + 0.1385, !- Fraction of Zone Controlled by Second Reference Point + 375.0, !- Illuminance Setpoint at First Reference Point {lux} + 375.0, !- Illuminance Setpoint at Second Reference Point {lux} + 2, !- Lighting Control Type + 270.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} + 22.0, !- Maximum Allowable Discomfort Glare Index + 0.3, !- Minimum Input Power Fraction for Continuous Dimming Control + 0.2, !- Minimum Light Output Fraction for Continuous Dimming Control + 3, !- Number of Stepped Control Steps + 1.0; !- Probability Lighting will be Reset When Needed in Manual Stepped Control + + + + + + + + + +Daylighting:Controls, + Perimeter_top_ZN_1, !- Zone Name + 2, !- Total Daylighting Reference Points + 36.576000, !- X-Coordinate of First Reference Point {m} + 1.676400, !- Y-Coordinate of First Reference Point {m} + 34.290000, !- Z-Coordinate of First Reference Point {m} + 36.576000, !- X-Coordinate of Second Reference Point {m} + 3.352800, !- Y-Coordinate of Second Reference Point {m} + 34.290000, !- Z-Coordinate of Second Reference Point {m} + 0.3857, !- Fraction of Zone Controlled by First Reference Point + 0.1385, !- Fraction of Zone Controlled by Second Reference Point + 375.0, !- Illuminance Setpoint at First Reference Point {lux} + 375.0, !- Illuminance Setpoint at Second Reference Point {lux} + 2, !- Lighting Control Type + 180.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} + 22.0, !- Maximum Allowable Discomfort Glare Index + 0.3, !- Minimum Input Power Fraction for Continuous Dimming Control + 0.2, !- Minimum Light Output Fraction for Continuous Dimming Control + 3, !- Number of Stepped Control Steps + 1.0; !- Probability Lighting will be Reset When Needed in Manual Stepped Control + + + + + + + + + +Daylighting:Controls, + Perimeter_top_ZN_2, !- Zone Name + 2, !- Total Daylighting Reference Points + 71.430800, !- X-Coordinate of First Reference Point {m} + 24.384000, !- Y-Coordinate of First Reference Point {m} + 34.290000, !- Z-Coordinate of First Reference Point {m} + 69.754400, !- X-Coordinate of Second Reference Point {m} + 24.384000, !- Y-Coordinate of Second Reference Point {m} + 34.290000, !- Z-Coordinate of Second Reference Point {m} + 0.3857, !- Fraction of Zone Controlled by First Reference Point + 0.1385, !- Fraction of Zone Controlled by Second Reference Point + 375.0, !- Illuminance Setpoint at First Reference Point {lux} + 375.0, !- Illuminance Setpoint at Second Reference Point {lux} + 2, !- Lighting Control Type + 90.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} + 22.0, !- Maximum Allowable Discomfort Glare Index + 0.3, !- Minimum Input Power Fraction for Continuous Dimming Control + 0.2, !- Minimum Light Output Fraction for Continuous Dimming Control + 3, !- Number of Stepped Control Steps + 1.0; !- Probability Lighting will be Reset When Needed in Manual Stepped Control + + + + + + + + + +Daylighting:Controls, + Perimeter_top_ZN_3, !- Zone Name + 2, !- Total Daylighting Reference Points + 36.576000, !- X-Coordinate of First Reference Point {m} + 47.061700, !- Y-Coordinate of First Reference Point {m} + 34.290000, !- Z-Coordinate of First Reference Point {m} + 36.576000, !- X-Coordinate of Second Reference Point {m} + 45.384700, !- Y-Coordinate of Second Reference Point {m} + 34.290000, !- Z-Coordinate of Second Reference Point {m} + 0.3857, !- Fraction of Zone Controlled by First Reference Point + 0.1385, !- Fraction of Zone Controlled by Second Reference Point + 375.0, !- Illuminance Setpoint at First Reference Point {lux} + 375.0, !- Illuminance Setpoint at Second Reference Point {lux} + 2, !- Lighting Control Type + 0.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} + 22.0, !- Maximum Allowable Discomfort Glare Index + 0.3, !- Minimum Input Power Fraction for Continuous Dimming Control + 0.2, !- Minimum Light Output Fraction for Continuous Dimming Control + 3, !- Number of Stepped Control Steps + 1.0; !- Probability Lighting will be Reset When Needed in Manual Stepped Control + + + + + + + + + +Daylighting:Controls, + Perimeter_top_ZN_4, !- Zone Name + 2, !- Total Daylighting Reference Points + 1.676400, !- X-Coordinate of First Reference Point {m} + 24.384000, !- Y-Coordinate of First Reference Point {m} + 34.290000, !- Z-Coordinate of First Reference Point {m} + 3.352800, !- X-Coordinate of Second Reference Point {m} + 24.384000, !- Y-Coordinate of Second Reference Point {m} + 34.290000, !- Z-Coordinate of Second Reference Point {m} + 0.3857, !- Fraction of Zone Controlled by First Reference Point + 0.1385, !- Fraction of Zone Controlled by Second Reference Point + 375.0, !- Illuminance Setpoint at First Reference Point {lux} + 375.0, !- Illuminance Setpoint at Second Reference Point {lux} + 2, !- Lighting Control Type + 270.0, !- Glare Calculation Azimuth Angle of View Direction Clockwise from Zone y-Axis {deg} + 22.0, !- Maximum Allowable Discomfort Glare Index + 0.3, !- Minimum Input Power Fraction for Continuous Dimming Control + 0.2, !- Minimum Light Output Fraction for Continuous Dimming Control + 3, !- Number of Stepped Control Steps + 1.0; !- Probability Lighting will be Reset When Needed in Manual Stepped Control + + + + + + + +!- =========== ALL OBJECTS IN CLASS: INFILTRATION =========== + + + ZoneInfiltration:DesignFlowRate, + Perimeter_bot_ZN_3_Infiltration, !- Name + Perimeter_bot_ZN_3, !- Zone or ZoneList Name + INFIL_SCH_PNNL, !- Schedule Name + Flow/ExteriorArea, !- Design Flow Rate Calculation Method + , !- Design Flow Rate {m3/s} + , !- Flow per Zone Floor Area {m3/s-m2} + 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} + , !- Air Changes per Hour {1/hr} + 0.0000, !- Constant Term Coefficient + 0.0000, !- Temperature Term Coefficient + 0.2240, !- Velocity Term Coefficient + 0.0000; !- Velocity Squared Term Coefficient + + + + ZoneInfiltration:DesignFlowRate, + Perimeter_bot_ZN_2_Infiltration, !- Name + Perimeter_bot_ZN_2, !- Zone or ZoneList Name + INFIL_SCH_PNNL, !- Schedule Name + Flow/ExteriorArea, !- Design Flow Rate Calculation Method + , !- Design Flow Rate {m3/s} + , !- Flow per Zone Floor Area {m3/s-m2} + 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} + , !- Air Changes per Hour {1/hr} + 0.0000, !- Constant Term Coefficient + 0.0000, !- Temperature Term Coefficient + 0.2240, !- Velocity Term Coefficient + 0.0000; !- Velocity Squared Term Coefficient + + + + ZoneInfiltration:DesignFlowRate, + Perimeter_bot_ZN_1_Infiltration, !- Name + Perimeter_bot_ZN_1, !- Zone or ZoneList Name + INFIL_SCH_PNNL, !- Schedule Name + Flow/ExteriorArea, !- Design Flow Rate Calculation Method + , !- Design Flow Rate {m3/s} + , !- Flow per Zone Floor Area {m3/s-m2} + 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} + , !- Air Changes per Hour {1/hr} + 0.0000, !- Constant Term Coefficient + 0.0000, !- Temperature Term Coefficient + 0.2240, !- Velocity Term Coefficient + 0.0000; !- Velocity Squared Term Coefficient + + + + ZoneInfiltration:DesignFlowRate, + Perimeter_bot_ZN_4_Infiltration, !- Name + Perimeter_bot_ZN_4, !- Zone or ZoneList Name + INFIL_SCH_PNNL, !- Schedule Name + Flow/ExteriorArea, !- Design Flow Rate Calculation Method + , !- Design Flow Rate {m3/s} + , !- Flow per Zone Floor Area {m3/s-m2} + 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} + , !- Air Changes per Hour {1/hr} + 0.0000, !- Constant Term Coefficient + 0.0000, !- Temperature Term Coefficient + 0.2240, !- Velocity Term Coefficient + 0.0000; !- Velocity Squared Term Coefficient + + + + ZoneInfiltration:DesignFlowRate, + Perimeter_mid_ZN_3_Infiltration, !- Name + Perimeter_mid_ZN_3, !- Zone or ZoneList Name + INFIL_SCH_PNNL, !- Schedule Name + Flow/ExteriorArea, !- Design Flow Rate Calculation Method + , !- Design Flow Rate {m3/s} + , !- Flow per Zone Floor Area {m3/s-m2} + 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} + , !- Air Changes per Hour {1/hr} + 0.0000, !- Constant Term Coefficient + 0.0000, !- Temperature Term Coefficient + 0.2240, !- Velocity Term Coefficient + 0.0000; !- Velocity Squared Term Coefficient + + + + ZoneInfiltration:DesignFlowRate, + Perimeter_mid_ZN_2_Infiltration, !- Name + Perimeter_mid_ZN_2, !- Zone or ZoneList Name + INFIL_SCH_PNNL, !- Schedule Name + Flow/ExteriorArea, !- Design Flow Rate Calculation Method + , !- Design Flow Rate {m3/s} + , !- Flow per Zone Floor Area {m3/s-m2} + 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} + , !- Air Changes per Hour {1/hr} + 0.0000, !- Constant Term Coefficient + 0.0000, !- Temperature Term Coefficient + 0.2240, !- Velocity Term Coefficient + 0.0000; !- Velocity Squared Term Coefficient + + + + ZoneInfiltration:DesignFlowRate, + Perimeter_mid_ZN_1_Infiltration, !- Name + Perimeter_mid_ZN_1, !- Zone or ZoneList Name + INFIL_SCH_PNNL, !- Schedule Name + Flow/ExteriorArea, !- Design Flow Rate Calculation Method + , !- Design Flow Rate {m3/s} + , !- Flow per Zone Floor Area {m3/s-m2} + 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} + , !- Air Changes per Hour {1/hr} + 0.0000, !- Constant Term Coefficient + 0.0000, !- Temperature Term Coefficient + 0.2240, !- Velocity Term Coefficient + 0.0000; !- Velocity Squared Term Coefficient + + + + ZoneInfiltration:DesignFlowRate, + Perimeter_mid_ZN_4_Infiltration, !- Name + Perimeter_mid_ZN_4, !- Zone or ZoneList Name + INFIL_SCH_PNNL, !- Schedule Name + Flow/ExteriorArea, !- Design Flow Rate Calculation Method + , !- Design Flow Rate {m3/s} + , !- Flow per Zone Floor Area {m3/s-m2} + 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2} + , !- Air Changes per Hour {1/hr} + 0.0000, !- Constant Term Coefficient + 0.0000, !- Temperature Term Coefficient + 0.2240, !- Velocity Term Coefficient + 0.0000; !- Velocity Squared Term Coefficient + + + + ZoneInfiltration:DesignFlowRate, + Perimeter_top_ZN_3_Infiltration, !- Name + Perimeter_top_ZN_3, !- Zone or ZoneList Name + INFIL_SCH_PNNL, !- Schedule Name + Flow/ExteriorArea, !- Design Flow Rate Calculation Method + , !- Design Flow Rate {m3/s} + , !- Flow per Zone Floor Area {m3/s-m2} + 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}urface Are + , !- Air Changes per Hour {1/hr} + 0.0000, !- Constant Term Coefficient + 0.0000, !- Temperature Term Coefficient + 0.2240, !- Velocity Term Coefficient + 0.0000; !- Velocity Squared Term Coefficient + + + + ZoneInfiltration:DesignFlowRate, + Perimeter_top_ZN_2_Infiltration, !- Name + Perimeter_top_ZN_2, !- Zone or ZoneList Name + INFIL_SCH_PNNL, !- Schedule Name + Flow/ExteriorArea, !- Design Flow Rate Calculation Method + , !- Design Flow Rate {m3/s} + , !- Flow per Zone Floor Area {m3/s-m2} + 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}urface Are + , !- Air Changes per Hour {1/hr} + 0.0000, !- Constant Term Coefficient + 0.0000, !- Temperature Term Coefficient + 0.2240, !- Velocity Term Coefficient + 0.0000; !- Velocity Squared Term Coefficient + + + + ZoneInfiltration:DesignFlowRate, + Perimeter_top_ZN_1_Infiltration, !- Name + Perimeter_top_ZN_1, !- Zone or ZoneList Name + INFIL_SCH_PNNL, !- Schedule Name + Flow/ExteriorArea, !- Design Flow Rate Calculation Method + , !- Design Flow Rate {m3/s} + , !- Flow per Zone Floor Area {m3/s-m2} + 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}urface Are + , !- Air Changes per Hour {1/hr} + 0.0000, !- Constant Term Coefficient + 0.0000, !- Temperature Term Coefficient + 0.2240, !- Velocity Term Coefficient + 0.0000; !- Velocity Squared Term Coefficient + + + + ZoneInfiltration:DesignFlowRate, + Perimeter_top_ZN_4_Infiltration, !- Name + Perimeter_top_ZN_4, !- Zone or ZoneList Name + INFIL_SCH_PNNL, !- Schedule Name + Flow/ExteriorArea, !- Design Flow Rate Calculation Method + , !- Design Flow Rate {m3/s} + , !- Flow per Zone Floor Area {m3/s-m2} + 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}urface Are + , !- Air Changes per Hour {1/hr} + 0.0000, !- Constant Term Coefficient + 0.0000, !- Temperature Term Coefficient + 0.2240, !- Velocity Term Coefficient + 0.0000; !- Velocity Squared Term Coefficient + + + + ZoneInfiltration:DesignFlowRate, + GroundFloor_Plenum_Infiltration, !- Name + GroundFloor_Plenum, !- Zone or ZoneList Name + INFIL_SCH_PNNL, !- Schedule Name + Flow/ExteriorArea, !- Design Flow Rate Calculation Method + , !- Design Flow Rate {m3/s} + , !- Flow per Zone Floor Area {m3/s-m2} + 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}urface Are + , !- Air Changes per Hour {1/hr} + 0.0000, !- Constant Term Coefficient + 0.0000, !- Temperature Term Coefficient + 0.2240, !- Velocity Term Coefficient + 0.0000; !- Velocity Squared Term Coefficient + + + + ZoneInfiltration:DesignFlowRate, + MidFloor_Plenum_Infiltration, !- Name + MidFloor_Plenum, !- Zone or ZoneList Name + INFIL_SCH_PNNL, !- Schedule Name + Flow/ExteriorArea, !- Design Flow Rate Calculation Method + , !- Design Flow Rate {m3/s} + , !- Flow per Zone Floor Area {m3/s-m2} + 0.00056896, !- Flow per Exterior Surface Area {m3/s-m2}urface Are + , !- Air Changes per Hour {1/hr} + 0.0000, !- Constant Term Coefficient + 0.0000, !- Temperature Term Coefficient + 0.2240, !- Velocity Term Coefficient + 0.0000; !- Velocity Squared Term Coefficient + + + + ZoneInfiltration:DesignFlowRate, + TopFloor_Plenum_Infiltration, !- Name + TopFloor_Plenum, !- Zone or ZoneList Name + INFIL_SCH_PNNL, !- Schedule Name + Flow/ExteriorArea, !- Design Flow Rate Calculation Method + , !- Design Flow Rate {m3/s} + , !- Flow per Zone Floor Area {m3/s-m2} + 4.37644032e-05, !- Flow per Exterior Surface Area {m3/s-m2} + , !- Air Changes per Hour {1/hr} + 0.0000, !- Constant Term Coefficient + 0.0000, !- Temperature Term Coefficient + 0.2240, !- Velocity Term Coefficient + 0.0000; !- Velocity Squared Term Coefficient + +!- =========== ALL OBJECTS IN CLASS: SIZING PARAMETERS =========== + + + Sizing:Parameters, + 1, !- Heating Sizing Factor + 1, !- Cooling Sizing Factor + 8; !- Timesteps in Averaging Window + +!- =========== ALL OBJECTS IN CLASS: ZONE SIZING =========== +!***** Space Conditioning For Zone: Basement ***** + + + Sizing:Zone, + Basement, !- Zone Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40.0, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-air} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kg-H2O/kg-air} + SZ DSOA Basement, !- Design Specification Outdoor Air Object Name + 0.0, !- Zone Heating Sizing Factor + 0.0, !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0.0, !- Cooling Minimum Air Flow {m3/s} + 0.0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + , !- Heating Maximum Air Flow {m3/s} + ; !- Heating Maximum Air Flow Fraction + + DesignSpecification:OutdoorAir, + SZ DSOA Basement, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s} + 0.000431773, !- outside air flow per zone area {m3/s-m2} + 0.0; !- Outdoor Air Flow per Zone {m3/s} + +!***** Space Conditioning For Zone: Core_bottom ***** + + + Sizing:Zone, + Core_bottom, !- Zone Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40.0, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-air} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kg-H2O/kg-air} + SZ DSOA Core_bottom, !- Design Specification Outdoor Air Object Name + 0.0, !- Zone Heating Sizing Factor + 0.0, !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0.0, !- Cooling Minimum Air Flow {m3/s} + 0.0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + , !- Heating Maximum Air Flow {m3/s} + ; !- Heating Maximum Air Flow Fraction + + DesignSpecification:OutdoorAir, + SZ DSOA Core_bottom, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s} + 0.000431773, !- outside air flow per zone area {m3/s-m2} + 0.0; !- Outdoor Air Flow per Zone {m3/s} + +!***** Space Conditioning For Zone: Core_mid ***** + + + Sizing:Zone, + Core_mid, !- Zone Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40.0, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-air} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kg-H2O/kg-air} + SZ DSOA Core_mid, !- Design Specification Outdoor Air Object Name + 0.0, !- Zone Heating Sizing Factor + 0.0, !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0.0, !- Cooling Minimum Air Flow {m3/s} + 0.0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + , !- Heating Maximum Air Flow {m3/s} + ; !- Heating Maximum Air Flow Fraction + + DesignSpecification:OutdoorAir, + SZ DSOA Core_mid, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s} + 0.000431773, !- outside air flow per zone area {m3/s-m2} + 0.0; !- Outdoor Air Flow per Zone {m3/s} + +!***** Space Conditioning For Zone: Core_top ***** + + + Sizing:Zone, + Core_top, !- Zone Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40.0, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-air} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kg-H2O/kg-air} + SZ DSOA Core_top, !- Design Specification Outdoor Air Object Name + 0.0, !- Zone Heating Sizing Factor + 0.0, !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0.0, !- Cooling Minimum Air Flow {m3/s} + 0.0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + , !- Heating Maximum Air Flow {m3/s} + ; !- Heating Maximum Air Flow Fraction + + DesignSpecification:OutdoorAir, + SZ DSOA Core_top, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s} + 0.000431773, !- outside air flow per zone area {m3/s-m2} + 0.0; !- Outdoor Air Flow per Zone {m3/s} + +!***** Space Conditioning For Zone: Perimeter_bot_ZN_3 ***** + + + Sizing:Zone, + Perimeter_bot_ZN_3, !- Zone Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40.0, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-air} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kg-H2O/kg-air} + SZ DSOA Perimeter_bot_ZN_3, !- Design Specification Outdoor Air Object Name + 0.0, !- Zone Heating Sizing Factor + 0.0, !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0.0, !- Cooling Minimum Air Flow {m3/s} + 0.0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + , !- Heating Maximum Air Flow {m3/s} + ; !- Heating Maximum Air Flow Fraction + + DesignSpecification:OutdoorAir, + SZ DSOA Perimeter_bot_ZN_3, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s} + 0.000431773, !- outside air flow per zone area {m3/s-m2} + 0.0; !- Outdoor Air Flow per Zone {m3/s} + +!***** Space Conditioning For Zone: Perimeter_bot_ZN_2 ***** + + + Sizing:Zone, + Perimeter_bot_ZN_2, !- Zone Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40.0, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-air} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kg-H2O/kg-air} + SZ DSOA Perimeter_bot_ZN_2, !- Design Specification Outdoor Air Object Name + 0.0, !- Zone Heating Sizing Factor + 0.0, !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0.0, !- Cooling Minimum Air Flow {m3/s} + 0.0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + , !- Heating Maximum Air Flow {m3/s} + ; !- Heating Maximum Air Flow Fraction + + DesignSpecification:OutdoorAir, + SZ DSOA Perimeter_bot_ZN_2, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s} + 0.000431773, !- outside air flow per zone area {m3/s-m2} + 0.0; !- Outdoor Air Flow per Zone {m3/s} + +!***** Space Conditioning For Zone: Perimeter_bot_ZN_1 ***** + + + Sizing:Zone, + Perimeter_bot_ZN_1, !- Zone Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40.0, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-air} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kg-H2O/kg-air} + SZ DSOA Perimeter_bot_ZN_1, !- Design Specification Outdoor Air Object Name + 0.0, !- Zone Heating Sizing Factor + 0.0, !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0.0, !- Cooling Minimum Air Flow {m3/s} + 0.0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + , !- Heating Maximum Air Flow {m3/s} + ; !- Heating Maximum Air Flow Fraction + + DesignSpecification:OutdoorAir, + SZ DSOA Perimeter_bot_ZN_1, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s} + 0.000431773, !- outside air flow per zone area {m3/s-m2} + 0.0; !- Outdoor Air Flow per Zone {m3/s} + +!***** Space Conditioning For Zone: Perimeter_bot_ZN_4 ***** + + + Sizing:Zone, + Perimeter_bot_ZN_4, !- Zone Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40.0, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-air} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kg-H2O/kg-air} + SZ DSOA Perimeter_bot_ZN_4, !- Design Specification Outdoor Air Object Name + 0.0, !- Zone Heating Sizing Factor + 0.0, !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0.0, !- Cooling Minimum Air Flow {m3/s} + 0.0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + , !- Heating Maximum Air Flow {m3/s} + ; !- Heating Maximum Air Flow Fraction + + DesignSpecification:OutdoorAir, + SZ DSOA Perimeter_bot_ZN_4, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s} + 0.000431773, !- outside air flow per zone area {m3/s-m2} + 0.0; !- Outdoor Air Flow per Zone {m3/s} + +!***** Space Conditioning For Zone: Perimeter_mid_ZN_3 ***** + + + Sizing:Zone, + Perimeter_mid_ZN_3, !- Zone Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40.0, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-air} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kg-H2O/kg-air} + SZ DSOA Perimeter_mid_ZN_3, !- Design Specification Outdoor Air Object Name + 0.0, !- Zone Heating Sizing Factor + 0.0, !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0.0, !- Cooling Minimum Air Flow {m3/s} + 0.0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + , !- Heating Maximum Air Flow {m3/s} + ; !- Heating Maximum Air Flow Fraction + + DesignSpecification:OutdoorAir, + SZ DSOA Perimeter_mid_ZN_3, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s} + 0.000431773, !- outside air flow per zone area {m3/s-m2} + 0.0; !- Outdoor Air Flow per Zone {m3/s} + +!***** Space Conditioning For Zone: Perimeter_mid_ZN_2 ***** + + + Sizing:Zone, + Perimeter_mid_ZN_2, !- Zone Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40.0, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-air} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kg-H2O/kg-air} + SZ DSOA Perimeter_mid_ZN_2, !- Design Specification Outdoor Air Object Name + 0.0, !- Zone Heating Sizing Factor + 0.0, !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0.0, !- Cooling Minimum Air Flow {m3/s} + 0.0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + , !- Heating Maximum Air Flow {m3/s} + ; !- Heating Maximum Air Flow Fraction + + DesignSpecification:OutdoorAir, + SZ DSOA Perimeter_mid_ZN_2, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s} + 0.000431773, !- outside air flow per zone area {m3/s-m2} + 0.0; !- Outdoor Air Flow per Zone {m3/s} + +!***** Space Conditioning For Zone: Perimeter_mid_ZN_1 ***** + + + Sizing:Zone, + Perimeter_mid_ZN_1, !- Zone Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40.0, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-air} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kg-H2O/kg-air} + SZ DSOA Perimeter_mid_ZN_1, !- Design Specification Outdoor Air Object Name + 0.0, !- Zone Heating Sizing Factor + 0.0, !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0.0, !- Cooling Minimum Air Flow {m3/s} + 0.0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + , !- Heating Maximum Air Flow {m3/s} + ; !- Heating Maximum Air Flow Fraction + + DesignSpecification:OutdoorAir, + SZ DSOA Perimeter_mid_ZN_1, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s} + 0.000431773, !- outside air flow per zone area {m3/s-m2} + 0.0; !- Outdoor Air Flow per Zone {m3/s} + +!***** Space Conditioning For Zone: Perimeter_mid_ZN_4 ***** + + + Sizing:Zone, + Perimeter_mid_ZN_4, !- Zone Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40.0, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-air} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kg-H2O/kg-air} + SZ DSOA Perimeter_mid_ZN_4, !- Design Specification Outdoor Air Object Name + 0.0, !- Zone Heating Sizing Factor + 0.0, !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0.0, !- Cooling Minimum Air Flow {m3/s} + 0.0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + , !- Heating Maximum Air Flow {m3/s} + ; !- Heating Maximum Air Flow Fraction + + DesignSpecification:OutdoorAir, + SZ DSOA Perimeter_mid_ZN_4, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s} + 0.000431773, !- outside air flow per zone area {m3/s-m2} + 0.0; !- Outdoor Air Flow per Zone {m3/s} + +!***** Space Conditioning For Zone: Perimeter_top_ZN_3 ***** + + + Sizing:Zone, + Perimeter_top_ZN_3, !- Zone Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40.0, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-air} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kg-H2O/kg-air} + SZ DSOA Perimeter_top_ZN_3, !- Design Specification Outdoor Air Object Name + 0.0, !- Zone Heating Sizing Factor + 0.0, !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0.0, !- Cooling Minimum Air Flow {m3/s} + 0.0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + , !- Heating Maximum Air Flow {m3/s} + ; !- Heating Maximum Air Flow Fraction + + DesignSpecification:OutdoorAir, + SZ DSOA Perimeter_top_ZN_3, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s} + 0.000431773, !- outside air flow per zone area {m3/s-m2} + 0.0; !- Outdoor Air Flow per Zone {m3/s} + +!***** Space Conditioning For Zone: Perimeter_top_ZN_2 ***** + + + Sizing:Zone, + Perimeter_top_ZN_2, !- Zone Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40.0, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-air} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kg-H2O/kg-air} + SZ DSOA Perimeter_top_ZN_2, !- Design Specification Outdoor Air Object Name + 0.0, !- Zone Heating Sizing Factor + 0.0, !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0.0, !- Cooling Minimum Air Flow {m3/s} + 0.0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + , !- Heating Maximum Air Flow {m3/s} + ; !- Heating Maximum Air Flow Fraction + + DesignSpecification:OutdoorAir, + SZ DSOA Perimeter_top_ZN_2, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s} + 0.000431773, !- outside air flow per zone area {m3/s-m2} + 0.0; !- Outdoor Air Flow per Zone {m3/s} + +!***** Space Conditioning For Zone: Perimeter_top_ZN_1 ***** + + + Sizing:Zone, + Perimeter_top_ZN_1, !- Zone Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40.0, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-air} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kg-H2O/kg-air} + SZ DSOA Perimeter_top_ZN_1, !- Design Specification Outdoor Air Object Name + 0.0, !- Zone Heating Sizing Factor + 0.0, !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0.0, !- Cooling Minimum Air Flow {m3/s} + 0.0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + , !- Heating Maximum Air Flow {m3/s} + ; !- Heating Maximum Air Flow Fraction + + DesignSpecification:OutdoorAir, + SZ DSOA Perimeter_top_ZN_1, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s} + 0.000431773, !- outside air flow per zone area {m3/s-m2} + 0.0; !- Outdoor Air Flow per Zone {m3/s} + +!***** Space Conditioning For Zone: Perimeter_top_ZN_4 ***** + + + Sizing:Zone, + Perimeter_top_ZN_4, !- Zone Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40.0, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-air} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kg-H2O/kg-air} + SZ DSOA Perimeter_top_ZN_4, !- Design Specification Outdoor Air Object Name + 0.0, !- Zone Heating Sizing Factor + 0.0, !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0.0, !- Cooling Minimum Air Flow {m3/s} + 0.0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + , !- Heating Maximum Air Flow {m3/s} + ; !- Heating Maximum Air Flow Fraction + + DesignSpecification:OutdoorAir, + SZ DSOA Perimeter_top_ZN_4, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s} + 0.000431773, !- outside air flow per zone area {m3/s-m2} + 0.0; !- Outdoor Air Flow per Zone {m3/s} + + +!- Adding Zone Sizing Objects for Data Center + +Sizing:Zone, + DataCenter_basement_ZN_6,!- Zone Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-air} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kg-H2O/kg-air} + SZ DSOA DataCenter_basement_ZN_6, !- Design Specification Outdoor Air Object Name + 0, !- Zone Heating Sizing Factor + 1.2, !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0, !- Cooling Minimum Air Flow {m3/s} + 0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + ; !- Heating Maximum Air Flow {m3/s} + + DesignSpecification:OutdoorAir, + SZ DSOA DataCenter_basement_ZN_6, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s} + 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} + 0; !- Outdoor Air Flow per Zone {m3/s} + +Sizing:Zone, + DataCenter_bot_ZN_6, !- Zone Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-air} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kg-H2O/kg-air} + SZ DSOA DataCenter_bot_ZN_6, !- Design Specification Outdoor Air Object Name + 0, !- Zone Heating Sizing Factor + 1.2, !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0, !- Cooling Minimum Air Flow {m3/s} + 0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + ; !- Heating Maximum Air Flow {m3/s} + + DesignSpecification:OutdoorAir, + SZ DSOA DataCenter_bot_ZN_6, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s} + 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} + 0; !- Outdoor Air Flow per Zone {m3/s} + +Sizing:Zone, + DataCenter_mid_ZN_6, !- Zone Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-air} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kg-H2O/kg-air} + SZ DSOA DataCenter_mid_ZN_6, !- Design Specification Outdoor Air Object Name + 0, !- Zone Heating Sizing Factor + 1.2, !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0, !- Cooling Minimum Air Flow {m3/s} + 0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + ; !- Heating Maximum Air Flow {m3/s} + + DesignSpecification:OutdoorAir, + SZ DSOA DataCenter_mid_ZN_6, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s} + 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} + 0; !- Outdoor Air Flow per Zone {m3/s} + +Sizing:Zone, + DataCenter_top_ZN_6, !- Zone Name + SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method + 12.8, !- Zone Cooling Design Supply Air Temperature {C} + , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} + SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method + 40, !- Zone Heating Design Supply Air Temperature {C} + , !- Zone Heating Design Supply Air Temperature Difference {deltaC} + 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-air} + 0.008, !- Zone Heating Design Supply Air Humidity Ratio {kg-H2O/kg-air} + SZ DSOA DataCenter_top_ZN_6, !- Design Specification Outdoor Air Object Name + 0, !- Zone Heating Sizing Factor + 1.2, !- Zone Cooling Sizing Factor + DesignDay, !- Cooling Design Air Flow Method + 0, !- Cooling Design Air Flow Rate {m3/s} + , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} + 0, !- Cooling Minimum Air Flow {m3/s} + 0, !- Cooling Minimum Air Flow Fraction + DesignDay, !- Heating Design Air Flow Method + 0, !- Heating Design Air Flow Rate {m3/s} + , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} + ; !- Heating Maximum Air Flow {m3/s} + + DesignSpecification:OutdoorAir, + SZ DSOA DataCenter_top_ZN_6, !- Name + Flow/Area, !- Outdoor Air Method + , !- Outdoor Air Flow per Person {m3/s} + 0.000431773, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} + 0; !- Outdoor Air Flow per Zone {m3/s} + +!- =========== ALL OBJECTS IN CLASS: SYSTEM SIZING =========== + + + Sizing:System, + CAV_bas, !- AirLoop Name + Sensible, !- Type of Load to Size On + AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} + 1.00, !- Minimum System Air Flow Ratio + 7.0, !- Preheat Design Temperature {C} + 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} + 12.8000, !- Precool Design Temperature {C} + 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} + 12.8000, !- Central Cooling Design Supply Air Temperature {C} + 40.0000, !- Central Heating Design Supply Air Temperature {C} + Coincident, !- Sizing Option + No, !- 100% Outdoor Air in Cooling + No, !- 100% Outdoor Air in Heating + 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-Air} + 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + ZoneSum; !- System Outdoor Air Method + + + + Sizing:System, + VAV_bot WITH REHEAT, !- AirLoop Name + Sensible, !- Type of Load to Size On + 2.53804133333333, !- Design Outdoor Air Flow Rate {m3/s} + 0.3000, !- Minimum System Air Flow Ratio + 7.0, !- Preheat Design Temperature {C} + 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} + 12.8000, !- Precool Design Temperature {C} + 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} + 12.8000, !- Central Cooling Design Supply Air Temperature {C} + 12.8000, !- Central Heating Design Supply Air Temperature {C} + Coincident, !- Sizing Option + No, !- 100% Outdoor Air in Cooling + No, !- 100% Outdoor Air in Heating + 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-Air} + 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + ZoneSum; !- System Outdoor Air Method + + + + Sizing:System, + VAV_mid WITH REHEAT, !- AirLoop Name + Sensible, !- Type of Load to Size On + 25.3803333333333, !- Design Outdoor Air Flow Rate {m3/s} + 0.3000, !- Minimum System Air Flow Ratio + 7.0, !- Preheat Design Temperature {C} + 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} + 12.8000, !- Precool Design Temperature {C} + 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} + 12.8000, !- Central Cooling Design Supply Air Temperature {C} + 12.8000, !- Central Heating Design Supply Air Temperature {C} + Coincident, !- Sizing Option + No, !- 100% Outdoor Air in Cooling + No, !- 100% Outdoor Air in Heating + 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-Air} + 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + ZoneSum; !- System Outdoor Air Method + + + + Sizing:System, + VAV_top WITH REHEAT, !- AirLoop Name + Sensible, !- Type of Load to Size On + 2.53804133333333, !- Design Outdoor Air Flow Rate {m3/s} + 0.3000, !- Minimum System Air Flow Ratio + 7.0, !- Preheat Design Temperature {C} + 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} + 12.8000, !- Precool Design Temperature {C} + 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} + 12.8000, !- Central Cooling Design Supply Air Temperature {C} + 12.8000, !- Central Heating Design Supply Air Temperature {C} + Coincident, !- Sizing Option + No, !- 100% Outdoor Air in Cooling + No, !- 100% Outdoor Air in Heating + 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-Air} + 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} + DesignDay, !- Cooling Design Air Flow Method + 0.0, !- Cooling Design Air Flow Rate {m3/s} + DesignDay, !- Heating Design Air Flow Method + 0.0, !- Heating Design Air Flow Rate {m3/s} + ZoneSum; !- System Outdoor Air Method + +!- Adding System Sizing Objects for Data Center + + + Sizing:System, + AirLoop DataCenter Basement, !- AirLoop Name + Sensible, !- Type of Load to Size On + autosize, !- Design Outdoor Air Flow Rate {m3/s} + 1, !- Minimum System Air Flow Ratio + 7, !- Preheat Design Temperature {C} + 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} + 12.8, !- Precool Design Temperature {C} + 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} + 12.8, !- Central Cooling Design Supply Air Temperature {C} + 40, !- Central Heating Design Supply Air Temperature {C} + Coincident, !- Sizing Option + No, !- 100% Outdoor Air in Cooling + No, !- 100% Outdoor Air in Heating + 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-Air} + 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} + DesignDay, !- Cooling Design Air Flow Method + 0, !- Cooling Design Air Flow Rate {m3/s} + DesignDay, !- Heating Design Air Flow Method + 0, !- Heating Design Air Flow Rate {m3/s} + ZoneSum; !- System Outdoor Air Method + + + + Sizing:System, + AirLoop DataCenter bot, !- AirLoop Name + Sensible, !- Type of Load to Size On + autosize, !- Design Outdoor Air Flow Rate {m3/s} + 1, !- Minimum System Air Flow Ratio + 7, !- Preheat Design Temperature {C} + 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} + 12.8, !- Precool Design Temperature {C} + 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} + 12.8, !- Central Cooling Design Supply Air Temperature {C} + 40, !- Central Heating Design Supply Air Temperature {C} + Coincident, !- Sizing Option + No, !- 100% Outdoor Air in Cooling + No, !- 100% Outdoor Air in Heating + 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-Air} + 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} + DesignDay, !- Cooling Design Air Flow Method + 0, !- Cooling Design Air Flow Rate {m3/s} + DesignDay, !- Heating Design Air Flow Method + 0, !- Heating Design Air Flow Rate {m3/s} + ZoneSum; !- System Outdoor Air Method + + + + Sizing:System, + AirLoop DataCenter mid, !- AirLoop Name + Sensible, !- Type of Load to Size On + autosize, !- Design Outdoor Air Flow Rate {m3/s} + 1, !- Minimum System Air Flow Ratio + 7, !- Preheat Design Temperature {C} + 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} + 12.8, !- Precool Design Temperature {C} + 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} + 12.8, !- Central Cooling Design Supply Air Temperature {C} + 40, !- Central Heating Design Supply Air Temperature {C} + Coincident, !- Sizing Option + No, !- 100% Outdoor Air in Cooling + No, !- 100% Outdoor Air in Heating + 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-Air} + 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} + DesignDay, !- Cooling Design Air Flow Method + 0, !- Cooling Design Air Flow Rate {m3/s} + DesignDay, !- Heating Design Air Flow Method + 0, !- Heating Design Air Flow Rate {m3/s} + ZoneSum; !- System Outdoor Air Method + + + + Sizing:System, + AirLoop DataCenter top, !- AirLoop Name + Sensible, !- Type of Load to Size On + autosize, !- Design Outdoor Air Flow Rate {m3/s} + 1, !- Minimum System Air Flow Ratio + 7, !- Preheat Design Temperature {C} + 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} + 12.8, !- Precool Design Temperature {C} + 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} + 12.8, !- Central Cooling Design Supply Air Temperature {C} + 40, !- Central Heating Design Supply Air Temperature {C} + Coincident, !- Sizing Option + No, !- 100% Outdoor Air in Cooling + No, !- 100% Outdoor Air in Heating + 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-Air} + 0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} + DesignDay, !- Cooling Design Air Flow Method + 0, !- Cooling Design Air Flow Rate {m3/s} + DesignDay, !- Heating Design Air Flow Method + 0, !- Heating Design Air Flow Rate {m3/s} + ZoneSum; !- System Outdoor Air Method + +!- =========== ALL OBJECTS IN CLASS: PLANT SIZING =========== + + + Sizing:Plant, + SHWSys1, !- Plant or Condenser Loop Name + Heating, !- Loop Type + 60, !- Design Loop Exit Temperature {C} + 5.0; !- Loop Design Temperature Difference {deltaC} + + + + Sizing:Plant, + HeatSys1, !- Plant or Condenser Loop Name + Heating, !- Loop Type + 82.0, !- Design Loop Exit Temperature {C} + 11.0; !- Loop Design Temperature Difference {deltaC} + + + + Sizing:Plant, + CoolSys1, !- Plant or Condenser Loop Name + Cooling, !- Loop Type + 6.67, !- Design Loop Exit Temperature {C} + 8.33; !- Loop Design Temperature Difference {deltaC} + + + + + + Sizing:Plant, + TowerWaterSys, !- Plant or Condenser Loop Name + Condenser, !- Loop Type + 29.4, !- Design Loop Exit Temperature {C} + 5.6; !- Loop Design Temperature Difference {deltaC} + +!- Plant loop for dry cooler and boiler for Data Center + + + Sizing:Plant, + Single Water Plant Loop, !- Plant or Condenser Loop Name + Heating, !- Loop Type + 39, !- Design Loop Exit Temperature {C} + 11; !- Loop Design Temperature Difference {deltaC} + + + +!- Set of chiller curves based on Dick Lord's study dated January 17, 2010... + +!- Hospital and Large Office have water cooled chillers...Hence set of water cooled chillers to be used in these prototypes... +!- Large Office will follow 90.1-2010 Path B in the PI case whereas Hospital will follow Path A based on the discussion with the SWG + +!- Changed the min. chiller condenser fluid entering temperature to 64 F (17.78 deg C) for water cooled chillers based on Dick's email dated June 4, 2010 +!- and 55 F (12.7 deg C) for air cooled chillers +!- based on email string and energyplus support clarification dated June 1, 2010...also changed the upper limit for air cooled chillers to 125 F (51.67 deg C) +!- and the water cooled chillers to 115 F (46.11 deg C) later the same day... + +! Temporary changes to address Dick's wrong PLR curves. On Oct. 27, 2010 +! Water cooled chiller PLR curve comes from E+ data library "ReformEIRChiller Carrier 19FA 5651kW/5.50COP/Vanes EIRFPLR" +! Air-cooled chiller PLR comes from the original curve before addendum M. + + +!- Water cooled chillers: Positive Displacement chillers... + +!- 90.1-2004 and 2007 Baseline curves... + +Curve:Biquadratic, + WC_PD_2004_CAPFT, !- Name + 0.9061150, !- Coefficient1 Constant + 0.0292277, !- Coefficient2 x + -0.0003647, !- Coefficient3 x**2 + -0.0009709, !- Coefficient4 y + -0.0000905, !- Coefficient5 y**2 + 0.0002527, !- Coefficient6 x*y + 5.0000, !- Minimum Value of x + 10.0000, !- Maximum Value of x + 17.78, !- Minimum Value of y + 46.11; !- Maximum Value of y + +Curve:Biquadratic, + WC_PD_2004_EIRFT, !- Name + 0.3617105, !- Coefficient1 Constant + -0.0229833, !- Coefficient2 x + 0.0009519, !- Coefficient3 x**2 + 0.0131889, !- Coefficient4 y + 0.0003752, !- Coefficient5 y**2 + -0.0007059, !- Coefficient6 x*y + 5.0000, !- Minimum Value of x + 10.0000, !- Maximum Value of x + 17.78, !- Minimum Value of y + 46.11; !- Maximum Value of y + + +Curve:Bicubic, + WC_PD_LT75_2004_EIRFPLR, !- Name + -1.360532E-01, !- Coefficient1 Constant + 8.642703E-03, !- Coefficient2 x + 3.855583E-06, !- Coefficient3 x**2 + 1.024034E+00, !- Coefficient4 y + 6.047444E-02, !- Coefficient5 y**2 + -8.947860E-03, !- Coefficient6 x*y + 0.000000E+00, !- Coefficient7 x**3 + 5.706602E-02, !- Coefficient8 y**3 + 0.000000E+00, !- Coefficient9 x**2*y + 0.000000E+00, !- Coefficient10 x*y**2 + 31.13, !- Minimum Value of x + 36.52, !- Maximum Value of x + 0.19, !- Minimum Value of y + 1.03; !- Maximum Value of y + + + + +Curve:Bicubic, + WC_PD_75TO150_2004_EIRFPLR, !- Name + -1.360532E-01, !- Coefficient1 Constant + 8.642703E-03, !- Coefficient2 x + 3.855583E-06, !- Coefficient3 x**2 + 1.024034E+00, !- Coefficient4 y + 6.047444E-02, !- Coefficient5 y**2 + -8.947860E-03, !- Coefficient6 x*y + 0.000000E+00, !- Coefficient7 x**3 + 5.706602E-02, !- Coefficient8 y**3 + 0.000000E+00, !- Coefficient9 x**2*y + 0.000000E+00, !- Coefficient10 x*y**2 + 31.13, !- Minimum Value of x + 36.52, !- Maximum Value of x + 0.19, !- Minimum Value of y + 1.03; !- Maximum Value of y + +Curve:Bicubic, + WC_PD_150TO300_2004_EIRFPLR, !- Name + -1.360532E-01, !- Coefficient1 Constant + 8.642703E-03, !- Coefficient2 x + 3.855583E-06, !- Coefficient3 x**2 + 1.024034E+00, !- Coefficient4 y + 6.047444E-02, !- Coefficient5 y**2 + -8.947860E-03, !- Coefficient6 x*y + 0.000000E+00, !- Coefficient7 x**3 + 5.706602E-02, !- Coefficient8 y**3 + 0.000000E+00, !- Coefficient9 x**2*y + 0.000000E+00, !- Coefficient10 x*y**2 + 31.13, !- Minimum Value of x + 36.52, !- Maximum Value of x + 0.19, !- Minimum Value of y + 1.03; !- Maximum Value of y + +Curve:Bicubic, + WC_PD_GT300_2004_EIRFPLR, !- Name + -1.360532E-01, !- Coefficient1 Constant + 8.642703E-03, !- Coefficient2 x + 3.855583E-06, !- Coefficient3 x**2 + 1.024034E+00, !- Coefficient4 y + 6.047444E-02, !- Coefficient5 y**2 + -8.947860E-03, !- Coefficient6 x*y + 0.000000E+00, !- Coefficient7 x**3 + 5.706602E-02, !- Coefficient8 y**3 + 0.000000E+00, !- Coefficient9 x**2*y + 0.000000E+00, !- Coefficient10 x*y**2 + 31.13, !- Minimum Value of x + 36.52, !- Maximum Value of x + 0.19, !- Minimum Value of y + 1.03; !- Maximum Value of y + +!- 90.1-2010 Path A curves... + +Curve:Biquadratic, + WC_PD_LT150_2010_PA_CAPFT, !- Name + 0.9061150, !- Coefficient1 Constant + 0.0292277, !- Coefficient2 x + -0.0003647, !- Coefficient3 x**2 + -0.0009709, !- Coefficient4 y + -0.0000905, !- Coefficient5 y**2 + 0.0002527, !- Coefficient6 x*y + 5.0000, !- Minimum Value of x + 10.0000, !- Maximum Value of x + 17.78, !- Minimum Value of y + 46.11; !- Maximum Value of y + +Curve:Biquadratic, + WC_PD_LT150_2010_PA_EIRFT, !- Name + 0.3617105, !- Coefficient1 Constant + -0.0229833, !- Coefficient2 x + 0.0009519, !- Coefficient3 x**2 + 0.0131889, !- Coefficient4 y + 0.0003752, !- Coefficient5 y**2 + -0.0007059, !- Coefficient6 x*y + 5.0000, !- Minimum Value of x + 10.0000, !- Maximum Value of x + 17.78, !- Minimum Value of y + 46.11; !- Maximum Value of y + +Curve:Biquadratic, + WC_PD_GT150_2010_PA_CAPFT, !- Name + 0.9061150, !- Coefficient1 Constant + 0.0292277, !- Coefficient2 x + -0.0003647, !- Coefficient3 x**2 + -0.0009709, !- Coefficient4 y + -0.0000905, !- Coefficient5 y**2 + 0.0002527, !- Coefficient6 x*y + 5.0000, !- Minimum Value of x + 10.0000, !- Maximum Value of x + 17.78, !- Minimum Value of y + 46.11; !- Maximum Value of y + +Curve:Biquadratic, + WC_PD_GT150_2010_PA_EIRFT, !- Name + 0.3773115, !- Coefficient1 Constant + -0.0229032, !- Coefficient2 x + 0.0016504, !- Coefficient3 x**2 + 0.0118156, !- Coefficient4 y + 0.0004345, !- Coefficient5 y**2 + -0.0010132, !- Coefficient6 x*y + 5.0000, !- Minimum Value of x + 10.0000, !- Maximum Value of x + 17.78, !- Minimum Value of y + 46.11; !- Maximum Value of y + +Curve:Bicubic, + WC_PD_LT75_2010_PA_EIRFPLR, !- Name + -1.360532E-01, !- Coefficient1 Constant + 8.642703E-03, !- Coefficient2 x + 3.855583E-06, !- Coefficient3 x**2 + 1.024034E+00, !- Coefficient4 y + 6.047444E-02, !- Coefficient5 y**2 + -8.947860E-03, !- Coefficient6 x*y + 0.000000E+00, !- Coefficient7 x**3 + 5.706602E-02, !- Coefficient8 y**3 + 0.000000E+00, !- Coefficient9 x**2*y + 0.000000E+00, !- Coefficient10 x*y**2 + 31.13, !- Minimum Value of x + 36.52, !- Maximum Value of x + 0.19, !- Minimum Value of y + 1.03; !- Maximum Value of y + +Curve:Bicubic, + WC_PD_75TO150_2010_PA_EIRFPLR, !- Name + -1.360532E-01, !- Coefficient1 Constant + 8.642703E-03, !- Coefficient2 x + 3.855583E-06, !- Coefficient3 x**2 + 1.024034E+00, !- Coefficient4 y + 6.047444E-02, !- Coefficient5 y**2 + -8.947860E-03, !- Coefficient6 x*y + 0.000000E+00, !- Coefficient7 x**3 + 5.706602E-02, !- Coefficient8 y**3 + 0.000000E+00, !- Coefficient9 x**2*y + 0.000000E+00, !- Coefficient10 x*y**2 + 31.13, !- Minimum Value of x + 36.52, !- Maximum Value of x + 0.19, !- Minimum Value of y + 1.03; !- Maximum Value of y + +Curve:Bicubic, + WC_PD_150TO300_2010_PA_EIRFPLR, !- Name + -1.360532E-01, !- Coefficient1 Constant + 8.642703E-03, !- Coefficient2 x + 3.855583E-06, !- Coefficient3 x**2 + 1.024034E+00, !- Coefficient4 y + 6.047444E-02, !- Coefficient5 y**2 + -8.947860E-03, !- Coefficient6 x*y + 0.000000E+00, !- Coefficient7 x**3 + 5.706602E-02, !- Coefficient8 y**3 + 0.000000E+00, !- Coefficient9 x**2*y + 0.000000E+00, !- Coefficient10 x*y**2 + 31.13, !- Minimum Value of x + 36.52, !- Maximum Value of x + 0.19, !- Minimum Value of y + 1.03; !- Maximum Value of y + +Curve:Bicubic, + WC_PD_GT300_2010_PA_EIRFPLR, !- Name + -1.360532E-01, !- Coefficient1 Constant + 8.642703E-03, !- Coefficient2 x + 3.855583E-06, !- Coefficient3 x**2 + 1.024034E+00, !- Coefficient4 y + 6.047444E-02, !- Coefficient5 y**2 + -8.947860E-03, !- Coefficient6 x*y + 0.000000E+00, !- Coefficient7 x**3 + 5.706602E-02, !- Coefficient8 y**3 + 0.000000E+00, !- Coefficient9 x**2*y + 0.000000E+00, !- Coefficient10 x*y**2 + 31.13, !- Minimum Value of x + 36.52, !- Maximum Value of x + 0.19, !- Minimum Value of y + 1.03; !- Maximum Value of y + +!- 90.1-2010 Path B curves.. + +Curve:Biquadratic, + WC_PD_2010_PB_CAPFT, !- Name + 0.9061171, !- Coefficient1 Constant + 0.0292267, !- Coefficient2 x + -0.0003665, !- Coefficient3 x**2 + -0.0009698, !- Coefficient4 y + -0.0000907, !- Coefficient5 y**2 + 0.0002535, !- Coefficient6 x*y + 5.0000, !- Minimum Value of x + 10.0000, !- Maximum Value of x + 17.78, !- Minimum Value of y + 46.11; !- Maximum Value of y + +Curve:Biquadratic, + WC_PD_2010_PB_EIRFT, !- Name + 0.3617782, !- Coefficient1 Constant + -0.0230016, !- Coefficient2 x + 0.0009672, !- Coefficient3 x**2 + 0.0131801, !- Coefficient4 y + 0.0003761, !- Coefficient5 y**2 + -0.0007121, !- Coefficient6 x*y + 5.0000, !- Minimum Value of x + 10.0000, !- Maximum Value of x + 17.78, !- Minimum Value of y + 46.11; !- Maximum Value of y + +Curve:Bicubic, + WC_PD_LT75_2010_PB_EIRFPLR, !- Name + -1.360532E-01, !- Coefficient1 Constant + 8.642703E-03, !- Coefficient2 x + 3.855583E-06, !- Coefficient3 x**2 + 1.024034E+00, !- Coefficient4 y + 6.047444E-02, !- Coefficient5 y**2 + -8.947860E-03, !- Coefficient6 x*y + 0.000000E+00, !- Coefficient7 x**3 + 5.706602E-02, !- Coefficient8 y**3 + 0.000000E+00, !- Coefficient9 x**2*y + 0.000000E+00, !- Coefficient10 x*y**2 + 31.13, !- Minimum Value of x + 36.52, !- Maximum Value of x + 0.19, !- Minimum Value of y + 1.03; !- Maximum Value of y + +Curve:Bicubic, + WC_PD_75TO150_2010_PB_EIRFPLR, !- Name + -1.360532E-01, !- Coefficient1 Constant + 8.642703E-03, !- Coefficient2 x + 3.855583E-06, !- Coefficient3 x**2 + 1.024034E+00, !- Coefficient4 y + 6.047444E-02, !- Coefficient5 y**2 + -8.947860E-03, !- Coefficient6 x*y + 0.000000E+00, !- Coefficient7 x**3 + 5.706602E-02, !- Coefficient8 y**3 + 0.000000E+00, !- Coefficient9 x**2*y + 0.000000E+00, !- Coefficient10 x*y**2 + 31.13, !- Minimum Value of x + 36.52, !- Maximum Value of x + 0.19, !- Minimum Value of y + 1.03; !- Maximum Value of y + +Curve:Bicubic, + WC_PD_150TO300_2010_PB_EIRFPLR, !- Name + -1.360532E-01, !- Coefficient1 Constant + 8.642703E-03, !- Coefficient2 x + 3.855583E-06, !- Coefficient3 x**2 + 1.024034E+00, !- Coefficient4 y + 6.047444E-02, !- Coefficient5 y**2 + -8.947860E-03, !- Coefficient6 x*y + 0.000000E+00, !- Coefficient7 x**3 + 5.706602E-02, !- Coefficient8 y**3 + 0.000000E+00, !- Coefficient9 x**2*y + 0.000000E+00, !- Coefficient10 x*y**2 + 31.13, !- Minimum Value of x + 36.52, !- Maximum Value of x + 0.19, !- Minimum Value of y + 1.03; !- Maximum Value of y + +Curve:Bicubic, + WC_PD_GT300_2010_PB_EIRFPLR, !- Name + -1.360532E-01, !- Coefficient1 Constant + 8.642703E-03, !- Coefficient2 x + 3.855583E-06, !- Coefficient3 x**2 + 1.024034E+00, !- Coefficient4 y + 6.047444E-02, !- Coefficient5 y**2 + -8.947860E-03, !- Coefficient6 x*y + 0.000000E+00, !- Coefficient7 x**3 + 5.706602E-02, !- Coefficient8 y**3 + 0.000000E+00, !- Coefficient9 x**2*y + 0.000000E+00, !- Coefficient10 x*y**2 + 31.13, !- Minimum Value of x + 36.52, !- Maximum Value of x + 0.19, !- Minimum Value of y + 1.03; !- Maximum Value of y + + +!- Water cooled chillers: Centrifugal Chillers... + +!- 90.1-2004 Baseline curves... + +Curve:Biquadratic, + WC_Cent_LT150_2004_CAPFT, !- Name + 0.7446451, !- Coefficient1 Constant + 0.0114858, !- Coefficient2 x + 0.0000148, !- Coefficient3 x**2 + 0.0224010, !- Coefficient4 y + -0.0006880, !- Coefficient5 y**2 + 0.0009839, !- Coefficient6 x*y + 5.0000, !- Minimum Value of x + 10.0000, !- Maximum Value of x + 17.78, !- Minimum Value of y + 46.11; !- Maximum Value of y + +Curve:Biquadratic, + WC_Cent_LT150_2004_EIRFT, !- Name + 0.7728770, !- Coefficient1 Constant + 0.0221010, !- Coefficient2 x + -0.0000799, !- Coefficient3 x**2 + -0.0070045, !- Coefficient4 y + 0.0004763, !- Coefficient5 y**2 + -0.0010612, !- Coefficient6 x*y + 5.0000, !- Minimum Value of x + 10.0000, !- Maximum Value of x + 17.78, !- Minimum Value of y + 46.11; !- Maximum Value of y + +Curve:Biquadratic, + WC_Cent_GT150_2004_CAPFT, !- Name + 0.7600172, !- Coefficient1 Constant + 0.0147432, !- Coefficient2 x + 0.0002144, !- Coefficient3 x**2 + 0.0207218, !- Coefficient4 y + -0.0006425, !- Coefficient5 y**2 + 0.0008007, !- Coefficient6 x*y + 5.0000, !- Minimum Value of x + 10.0000, !- Maximum Value of x + 17.78, !- Minimum Value of y + 46.11; !- Maximum Value of y + +Curve:Biquadratic, + WC_Cent_GT150_2004_EIRFT, !- Name + 0.6772577, !- Coefficient1 Constant + 0.0117857, !- Coefficient2 x + -0.0001967, !- Coefficient3 x**2 + 0.0014414, !- Coefficient4 y + 0.0003005, !- Coefficient5 y**2 + -0.0006807, !- Coefficient6 x*y + 5.0000, !- Minimum Value of x + 10.0000, !- Maximum Value of x + 17.78, !- Minimum Value of y + 46.11; !- Maximum Value of y + +Curve:Bicubic, + WC_Cent_LT150_2004_EIRFPLR, !- Name + -1.360532E-01, !- Coefficient1 Constant + 8.642703E-03, !- Coefficient2 x + 3.855583E-06, !- Coefficient3 x**2 + 1.024034E+00, !- Coefficient4 y + 6.047444E-02, !- Coefficient5 y**2 + -8.947860E-03, !- Coefficient6 x*y + 0.000000E+00, !- Coefficient7 x**3 + 5.706602E-02, !- Coefficient8 y**3 + 0.000000E+00, !- Coefficient9 x**2*y + 0.000000E+00, !- Coefficient10 x*y**2 + 31.13, !- Minimum Value of x + 36.52, !- Maximum Value of x + 0.19, !- Minimum Value of y + 1.03; !- Maximum Value of y + +Curve:Bicubic, + WC_Cent_150TO300_2004_EIRFPLR,!- Name + -1.360532E-01, !- Coefficient1 Constant + 8.642703E-03, !- Coefficient2 x + 3.855583E-06, !- Coefficient3 x**2 + 1.024034E+00, !- Coefficient4 y + 6.047444E-02, !- Coefficient5 y**2 + -8.947860E-03, !- Coefficient6 x*y + 0.000000E+00, !- Coefficient7 x**3 + 5.706602E-02, !- Coefficient8 y**3 + 0.000000E+00, !- Coefficient9 x**2*y + 0.000000E+00, !- Coefficient10 x*y**2 + 31.13, !- Minimum Value of x + 36.52, !- Maximum Value of x + 0.19, !- Minimum Value of y + 1.03; !- Maximum Value of y + + +Curve:Bicubic, + WC_Cent_GT300_2004_EIRFPLR, !- Name + -1.360532E-01, !- Coefficient1 Constant + 8.642703E-03, !- Coefficient2 x + 3.855583E-06, !- Coefficient3 x**2 + 1.024034E+00, !- Coefficient4 y + 6.047444E-02, !- Coefficient5 y**2 + -8.947860E-03, !- Coefficient6 x*y + 0.000000E+00, !- Coefficient7 x**3 + 5.706602E-02, !- Coefficient8 y**3 + 0.000000E+00, !- Coefficient9 x**2*y + 0.000000E+00, !- Coefficient10 x*y**2 + 31.13, !- Minimum Value of x + 36.52, !- Maximum Value of x + 0.19, !- Minimum Value of y + 1.03; !- Maximum Value of y + + + !- 90.1-2010 Path A curves... + +Curve:Biquadratic, + WC_Cent_2010_PA_CAPFT, !- Name + 0.7600172, !- Coefficient1 Constant + 0.0147432, !- Coefficient2 x + 0.0002144, !- Coefficient3 x**2 + 0.0207218, !- Coefficient4 y + -0.0006425, !- Coefficient5 y**2 + 0.0008007, !- Coefficient6 x*y + 5.0000, !- Minimum Value of x + 10.0000, !- Maximum Value of x + 17.78, !- Minimum Value of y + 46.11; !- Maximum Value of y + +Curve:Biquadratic, + WC_Cent_2010_PA_EIRFT, !- Name + 0.6772577, !- Coefficient1 Constant + 0.0117857, !- Coefficient2 x + -0.0001967, !- Coefficient3 x**2 + 0.0014414, !- Coefficient4 y + 0.0003005, !- Coefficient5 y**2 + -0.0006807, !- Coefficient6 x*y + 5.0000, !- Minimum Value of x + 10.0000, !- Maximum Value of x + 17.78, !- Minimum Value of y + 46.11; !- Maximum Value of y + + +Curve:Bicubic, + WC_Cent_LT150_2010_PA_EIRFPLR, !- Name + -1.360532E-01, !- Coefficient1 Constant + 8.642703E-03, !- Coefficient2 x + 3.855583E-06, !- Coefficient3 x**2 + 1.024034E+00, !- Coefficient4 y + 6.047444E-02, !- Coefficient5 y**2 + -8.947860E-03, !- Coefficient6 x*y + 0.000000E+00, !- Coefficient7 x**3 + 5.706602E-02, !- Coefficient8 y**3 + 0.000000E+00, !- Coefficient9 x**2*y + 0.000000E+00, !- Coefficient10 x*y**2 + 31.13, !- Minimum Value of x + 36.52, !- Maximum Value of x + 0.19, !- Minimum Value of y + 1.03; !- Maximum Value of y + +Curve:Bicubic, + WC_Cent_150TO300_2010_PA_EIRFPLR,!- Name + -1.360532E-01, !- Coefficient1 Constant + 8.642703E-03, !- Coefficient2 x + 3.855583E-06, !- Coefficient3 x**2 + 1.024034E+00, !- Coefficient4 y + 6.047444E-02, !- Coefficient5 y**2 + -8.947860E-03, !- Coefficient6 x*y + 0.000000E+00, !- Coefficient7 x**3 + 5.706602E-02, !- Coefficient8 y**3 + 0.000000E+00, !- Coefficient9 x**2*y + 0.000000E+00, !- Coefficient10 x*y**2 + 31.13, !- Minimum Value of x + 36.52, !- Maximum Value of x + 0.19, !- Minimum Value of y + 1.03; !- Maximum Value of y + +Curve:Bicubic, + WC_Cent_300TO600_2010_PA_EIRFPLR, !- Name + -1.360532E-01, !- Coefficient1 Constant + 8.642703E-03, !- Coefficient2 x + 3.855583E-06, !- Coefficient3 x**2 + 1.024034E+00, !- Coefficient4 y + 6.047444E-02, !- Coefficient5 y**2 + -8.947860E-03, !- Coefficient6 x*y + 0.000000E+00, !- Coefficient7 x**3 + 5.706602E-02, !- Coefficient8 y**3 + 0.000000E+00, !- Coefficient9 x**2*y + 0.000000E+00, !- Coefficient10 x*y**2 + 31.13, !- Minimum Value of x + 36.52, !- Maximum Value of x + 0.19, !- Minimum Value of y + 1.03; !- Maximum Value of y + +Curve:Bicubic, + WC_Cent_GT600_2010_PA_EIRFPLR, !- Name + -1.360532E-01, !- Coefficient1 Constant + 8.642703E-03, !- Coefficient2 x + 3.855583E-06, !- Coefficient3 x**2 + 1.024034E+00, !- Coefficient4 y + 6.047444E-02, !- Coefficient5 y**2 + -8.947860E-03, !- Coefficient6 x*y + 0.000000E+00, !- Coefficient7 x**3 + 5.706602E-02, !- Coefficient8 y**3 + 0.000000E+00, !- Coefficient9 x**2*y + 0.000000E+00, !- Coefficient10 x*y**2 + 31.13, !- Minimum Value of x + 36.52, !- Maximum Value of x + 0.19, !- Minimum Value of y + 1.03; !- Maximum Value of y + +!- 90.1-2010 Path B curves... + +Curve:Biquadratic, + WC_Cent_2010_PB_CAPFT, !- Name + 0.5362340, !- Coefficient1 Constant + 0.005581, !- Coefficient2 x + -0.0013654, !- Coefficient3 x**2 + 0.0488966, !- Coefficient4 y + -0.0012018, !- Coefficient5 y**2 + 0.0010523, !- Coefficient6 x*y + 5.0000, !- Minimum Value of x + 10.0000, !- Maximum Value of x + 17.78, !- Minimum Value of y + 46.11; !- Maximum Value of y + +Curve:Biquadratic, + WC_Cent_2010_PB_EIRFT, !- Name + 1.0821822, !- Coefficient1 Constant + 0.0042977, !- Coefficient2 x + -0.0013182, !- Coefficient3 x**2 + -0.0260781, !- Coefficient4 y + 0.0008256, !- Coefficient5 y**2 + -0.0006013, !- Coefficient6 x*y + 5.0000, !- Minimum Value of x + 10.0000, !- Maximum Value of x + 17.78, !- Minimum Value of y + 46.11; !- Maximum Value of y + + +Curve:Bicubic, + WC_Cent_LT150_2010_PB_EIRFPLR, !- Name + -1.360532E-01, !- Coefficient1 Constant + 8.642703E-03, !- Coefficient2 x + 3.855583E-06, !- Coefficient3 x**2 + 1.024034E+00, !- Coefficient4 y + 6.047444E-02, !- Coefficient5 y**2 + -8.947860E-03, !- Coefficient6 x*y + 0.000000E+00, !- Coefficient7 x**3 + 5.706602E-02, !- Coefficient8 y**3 + 0.000000E+00, !- Coefficient9 x**2*y + 0.000000E+00, !- Coefficient10 x*y**2 + 31.13, !- Minimum Value of x + 36.52, !- Maximum Value of x + 0.19, !- Minimum Value of y + 1.03; !- Maximum Value of y + + +Curve:Bicubic, + WC_Cent_150TO300_2010_PB_EIRFPLR, !- Name + -1.360532E-01, !- Coefficient1 Constant + 8.642703E-03, !- Coefficient2 x + 3.855583E-06, !- Coefficient3 x**2 + 1.024034E+00, !- Coefficient4 y + 6.047444E-02, !- Coefficient5 y**2 + -8.947860E-03, !- Coefficient6 x*y + 0.000000E+00, !- Coefficient7 x**3 + 5.706602E-02, !- Coefficient8 y**3 + 0.000000E+00, !- Coefficient9 x**2*y + 0.000000E+00, !- Coefficient10 x*y**2 + 31.13, !- Minimum Value of x + 36.52, !- Maximum Value of x + 0.19, !- Minimum Value of y + 1.03; !- Maximum Value of y + + +Curve:Bicubic, + WC_Cent_300TO600_2010_PB_EIRFPLR, !- Name + -1.360532E-01, !- Coefficient1 Constant + 8.642703E-03, !- Coefficient2 x + 3.855583E-06, !- Coefficient3 x**2 + 1.024034E+00, !- Coefficient4 y + 6.047444E-02, !- Coefficient5 y**2 + -8.947860E-03, !- Coefficient6 x*y + 0.000000E+00, !- Coefficient7 x**3 + 5.706602E-02, !- Coefficient8 y**3 + 0.000000E+00, !- Coefficient9 x**2*y + 0.000000E+00, !- Coefficient10 x*y**2 + 31.13, !- Minimum Value of x + 36.52, !- Maximum Value of x + 0.19, !- Minimum Value of y + 1.03; !- Maximum Value of y + +Curve:Bicubic, + WC_Cent_GT600_2010_PB_EIRFPLR, !- Name + -1.360532E-01, !- Coefficient1 Constant + 8.642703E-03, !- Coefficient2 x + 3.855583E-06, !- Coefficient3 x**2 + 1.024034E+00, !- Coefficient4 y + 6.047444E-02, !- Coefficient5 y**2 + -8.947860E-03, !- Coefficient6 x*y + 0.000000E+00, !- Coefficient7 x**3 + 5.706602E-02, !- Coefficient8 y**3 + 0.000000E+00, !- Coefficient9 x**2*y + 0.000000E+00, !- Coefficient10 x*y**2 + 31.13, !- Minimum Value of x + 36.52, !- Maximum Value of x + 0.19, !- Minimum Value of y + 1.03; !- Maximum Value of y + +!- Air cooled chillers... + +!- 90.1-2004 Baseline curves... + +Curve:Biquadratic, + AC_2004_CAPFT, !- Name + 1.0433811, !- Coefficient1 Constant + 0.0407077, !- Coefficient2 x + 0.0004506, !- Coefficient3 x**2 + -0.0041514, !- Coefficient4 y + -0.0000886, !- Coefficient5 y**2 + -0.0003467, !- Coefficient6 x*y + 5.0000, !- Minimum Value of x + 10.0000, !- Maximum Value of x + 12.7, !- Minimum Value of y + 51.67; !- Maximum Value of y + +Curve:Biquadratic, + AC_2004_EIRFT, !- Name + 0.5961915, !- Coefficient1 Constant + -0.0099496, !- Coefficient2 x + 0.0007888, !- Coefficient3 x**2 + 0.0004506, !- Coefficient4 y + 0.0004875, !- Coefficient5 y**2 + -0.0007623, !- Coefficient6 x*y + 5.0000, !- Minimum Value of x + 10.0000, !- Maximum Value of x + 12.7, !- Minimum Value of y + 51.67; !- Maximum Value of y + +Curve:Quadratic, + AC_LT150_2004_EIRFPLR, !- Name + 0.1410, !- Coefficient1 Constant + 0.6550, !- Coefficient2 x + 0.2030, !- Coefficient3 x**2 + 0.0000, !- Minimum Value of x + 1.0000; !- Maximum Value of x + +Curve:Quadratic, + AC_GT150_2004_EIRFPLR, !- Name + 0.1410, !- Coefficient1 Constant + 0.6550, !- Coefficient2 x + 0.2030, !- Coefficient3 x**2 + 0.0000, !- Minimum Value of x + 1.0000; !- Maximum Value of x + +!- 90.1-2010 Path A curves... + +Curve:Biquadratic, + AC_2010_PA_CAPFT, !- Name + 1.0433825, !- Coefficient1 Constant + 0.0407073, !- Coefficient2 x + 0.0004506, !- Coefficient3 x**2 + -0.0041514, !- Coefficient4 y + -0.0000886, !- Coefficient5 y**2 + -0.0003467, !- Coefficient6 x*y + 5.0000, !- Minimum Value of x + 10.0000, !- Maximum Value of x + 12.7, !- Minimum Value of y + 51.67; !- Maximum Value of y + +Curve:Biquadratic, + AC_2010_PA_EIRFT, !- Name + 0.5961907, !- Coefficient1 Constant + -0.0099493, !- Coefficient2 x + 0.0007888, !- Coefficient3 x**2 + 0.0004506, !- Coefficient4 y + 0.0004875, !- Coefficient5 y**2 + -0.0007623, !- Coefficient6 x*y + 5.0000, !- Minimum Value of x + 10.0000, !- Maximum Value of x + 12.7, !- Minimum Value of y + 51.67; !- Maximum Value of y + +Curve:Quadratic, + AC_LT150_2010_PA_EIRFPLR, !- Name + 0.1410, !- Coefficient1 Constant + 0.6550, !- Coefficient2 x + 0.2030, !- Coefficient3 x**2 + 0.0000, !- Minimum Value of x + 1.0000; !- Maximum Value of x + +Curve:Quadratic, + AC_GT150_2010_PA_EIRFPLR, !- Name + 0.1410, !- Coefficient1 Constant + 0.6550, !- Coefficient2 x + 0.2030, !- Coefficient3 x**2 + 0.0000, !- Minimum Value of x + 1.0000; !- Maximum Value of x + + + + + +!- =========== ALL OBJECTS IN CLASS: CURVE:BIQUADRATIC =========== + +!***** Following curve is from Dick Lord's Chiller Model study for ASHRAE 2007 baseline ***** + + Curve:Biquadratic, + ChillerCentCapFT, !- Name + 0.7446451, !- Coefficient1 Constant + 0.0114858, !- Coefficient2 x + 0.0000148, !- Coefficient3 x**2 + 0.0224010, !- Coefficient4 y + -0.0006880, !- Coefficient5 y**2 + 0.0009839, !- Coefficient6 x*y + 5.0000, !- Minimum Value of x + 10.0000, !- Maximum Value of x + 24.0000, !- Minimum Value of y + 35.0000; !- Maximum Value of y +!***** Following curve is from Dick Lord's Chiller Model study for ASHRAE 2007 baseline ***** + + Curve:Biquadratic, + ChillerCentEIRFT, !- Name + 0.7728770, !- Coefficient1 Constant + 0.0221010, !- Coefficient2 x + -0.0000799, !- Coefficient3 x**2 + -0.0070045, !- Coefficient4 y + 0.0004763, !- Coefficient5 y**2 + -0.0010612, !- Coefficient6 x*y + 5.0000, !- Minimum Value of x + 10.0000, !- Maximum Value of x + 24.0000, !- Minimum Value of y + 35.0000; !- Maximum Value of y + + + + + +!- =========== ALL OBJECTS IN CLASS: CURVE:BICUBIC =========== +!***** Following curve is from Dick Lord's Chiller Model study for ASHRAE 2007 baseline ***** + + Curve:Bicubic, + ChillerCentEIRPLR, !- Name + -1.360532E-01, !- Coefficient1 Constant + 8.642703E-03, !- Coefficient2 x + 3.855583E-06, !- Coefficient3 x**2 + 1.024034E+00, !- Coefficient4 y + 6.047444E-02, !- Coefficient5 y**2 + -8.947860E-03, !- Coefficient6 x*y + 0.000000E+00, !- Coefficient7 x**3 + 5.706602E-02, !- Coefficient8 y**3 + 0.000000E+00, !- Coefficient9 x**2*y + 0.000000E+00, !- Coefficient10 x*y**2 + 31.13, !- Minimum Value of x + 36.52, !- Maximum Value of x + 0.19, !- Minimum Value of y + 1.03; !- Maximum Value of y + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +!- =========== ALL OBJECTS IN CLASS: NODE LIST =========== + + + NodeList, + Basement Inlet Nodes, !- Name + Basement Direct Air Inlet Node Name; !- Node 1 Name + + + + NodeList, + Core_bottom Inlet Nodes, !- Name + Core_bottom VAV Box Outlet Node; !- Node 1 Name + + + + NodeList, + Core_mid Inlet Nodes, !- Name + Core_mid VAV Box Outlet Node; !- Node 1 Name + + + + NodeList, + Core_top Inlet Nodes, !- Name + Core_top VAV Box Outlet Node; !- Node 1 Name + + + + NodeList, + Perimeter_bot_ZN_3 Inlet Nodes, !- Name + Perimeter_bot_ZN_3 VAV Box Outlet Node; !- Node 1 Name + + + + NodeList, + Perimeter_bot_ZN_2 Inlet Nodes, !- Name + Perimeter_bot_ZN_2 VAV Box Outlet Node; !- Node 1 Name + + + + NodeList, + Perimeter_bot_ZN_1 Inlet Nodes, !- Name + Perimeter_bot_ZN_1 VAV Box Outlet Node; !- Node 1 Name + + + + NodeList, + Perimeter_bot_ZN_4 Inlet Nodes, !- Name + Perimeter_bot_ZN_4 VAV Box Outlet Node; !- Node 1 Name + + + + NodeList, + Perimeter_mid_ZN_3 Inlet Nodes, !- Name + Perimeter_mid_ZN_3 VAV Box Outlet Node; !- Node 1 Name + + + + NodeList, + Perimeter_mid_ZN_2 Inlet Nodes, !- Name + Perimeter_mid_ZN_2 VAV Box Outlet Node; !- Node 1 Name + + + + NodeList, + Perimeter_mid_ZN_1 Inlet Nodes, !- Name + Perimeter_mid_ZN_1 VAV Box Outlet Node; !- Node 1 Name + + + + NodeList, + Perimeter_mid_ZN_4 Inlet Nodes, !- Name + Perimeter_mid_ZN_4 VAV Box Outlet Node; !- Node 1 Name + + + + NodeList, + Perimeter_top_ZN_3 Inlet Nodes, !- Name + Perimeter_top_ZN_3 VAV Box Outlet Node; !- Node 1 Name + + + + NodeList, + Perimeter_top_ZN_2 Inlet Nodes, !- Name + Perimeter_top_ZN_2 VAV Box Outlet Node; !- Node 1 Name + + + + NodeList, + Perimeter_top_ZN_1 Inlet Nodes, !- Name + Perimeter_top_ZN_1 VAV Box Outlet Node; !- Node 1 Name + + + + NodeList, + Perimeter_top_ZN_4 Inlet Nodes, !- Name + Perimeter_top_ZN_4 VAV Box Outlet Node; !- Node 1 Name + + + + NodeList, + CAV_bas_OANode List, !- Name + CAV_bas_OAInlet Node; !- Node 1 Name + + + + NodeList, + VAV_bot WITH REHEAT_OANode List, !- Name + VAV_bot WITH REHEAT_OAInlet Node; !- Node 1 Name + + + + NodeList, + VAV_mid WITH REHEAT_OANode List, !- Name + VAV_mid WITH REHEAT_OAInlet Node; !- Node 1 Name + + + + NodeList, + VAV_top WITH REHEAT_OANode List, !- Name + VAV_top WITH REHEAT_OAInlet Node; !- Node 1 Name + + + + NodeList, + DataCenter Basement Inlets, !- Name + DataCenter Basement Supply Inlet; !- Node 1 Name + + + + NodeList, + DataCenter bot Inlets, !- Name + DataCenter bot Supply Inlet; !- Node 1 Name + + + + NodeList, + DataCenter mid Inlets, !- Name + DataCenter mid Supply Inlet; !- Node 1 Name + + + + NodeList, + DataCenter top Inlets, !- Name + DataCenter top Supply Inlet; !- Node 1 Name + +!- =========== ALL OBJECTS IN CLASS: BRANCH LIST =========== + + + BranchList, + CAV_bas Air Loop Branches, !- Name + CAV_bas Air Loop Main Branch; !- Branch 1 Name + + + + BranchList, + VAV_bot WITH REHEAT Air Loop Branches, !- Name + VAV_bot WITH REHEAT Air Loop Main Branch; !- Branch 1 Name + + + + BranchList, + VAV_mid WITH REHEAT Air Loop Branches, !- Name + VAV_mid WITH REHEAT Air Loop Main Branch; !- Branch 1 Name + + + + BranchList, + VAV_top WITH REHEAT Air Loop Branches, !- Name + VAV_top WITH REHEAT Air Loop Main Branch; !- Branch 1 Name + + + + BranchList, + SHWSys1 Supply Branches, !- Name + SHWSys1 Supply Inlet Branch, !- Branch 1 Name + SHWSys1 Supply Equipment Branch, !- Branch 2 Name + SHWSys1 Supply Equipment Bypass Branch, !- Branch 3 Name + SHWSys1 Supply Outlet Branch; !- Branch 4 Name + + + + BranchList, + SHWSys1 Demand Branches, !- Name + SHWSys1 Demand Inlet Branch, !- Branch 1 Name + SHWSys1 Demand Load Branch 1, !- Branch 2 Name + SHWSys1 Demand Load Branch 2, !- Branch 3 Name + SHWSys1 Demand Load Branch 3, !- Branch 4 Name + SHWSys1 Demand Bypass Branch, !- Branch 5 Name + SHWSys1 Demand Outlet Branch; !- Branch 6 Name + + + + BranchList, + HeatSys1 Supply Branches,!- Name + HeatSys1 Supply Inlet Branch, !- Branch 1 Name + HeatSys1 Supply Equipment Branch, !- Branch 2 Name + HeatSys1 Supply Equipment Bypass Branch, !- Branch 3 Name + HeatSys1 Supply Outlet Branch; !- Branch 4 Name + + + + + BranchList, + HeatSys1 Demand Branches,!- Name + HeatSys1 Demand Inlet Branch, !- Branch 1 Name + HeatSys1 Demand Load Branch 1, !- Branch 2 Name + HeatSys1 Demand Load Branch 2, !- Branch 3 Name + HeatSys1 Demand Load Branch 3, !- Branch 4 Name + HeatSys1 Demand Load Branch 4, !- Branch 5 Name + HeatSys1 Demand Load Branch 5, !- Branch 6 Name + HeatSys1 Demand Load Branch 6, !- Branch 7 Name + HeatSys1 Demand Load Branch 7, !- Branch 8 Name + HeatSys1 Demand Load Branch 8, !- Branch 9 Name + HeatSys1 Demand Load Branch 9, !- Branch 10 Name + HeatSys1 Demand Load Branch 10, !- Branch 11 Name + HeatSys1 Demand Load Branch 11, !- Branch 12 Name + HeatSys1 Demand Load Branch 12, !- Branch 13 Name + HeatSys1 Demand Load Branch 13, !- Branch 14 Name + HeatSys1 Demand Load Branch 14, !- Branch 15 Name + HeatSys1 Demand Load Branch 15, !- Branch 16 Name + HeatSys1 Demand Load Branch 17, !- Branch 17 Name + HeatSys1 Demand Load Branch 18, !- Branch 18 Name + HeatSys1 Demand Load Branch 19, !- Branch 19 Name + HeatSys1 Demand Load Branch 20, !- Branch 20 Name + HeatSys1 Demand Load Branch 21, !- Branch 21 Name + HeatSys1 Demand Bypass Branch, !- Branch 22 Name + HeatSys1 Demand Outlet Branch; !- Branch 23 Name + + + + BranchList, + CoolSys1 Supply Branches,!- Name + CoolSys1 Supply Inlet Branch, !- Branch 1 Name + CoolSys1 Supply Equipment Branch 1, !- Branch 2 Name + CoolSys1 Supply Equipment Branch 2, !- Branch 3 Name + CoolSys1 Supply Equipment Bypass Branch, !- Branch 4 Name + CoolSys1 Supply Outlet Branch; !- Branch 5 Name + + + + + BranchList, + CoolSys1 Demand Branches,!- Name + CoolSys1 Demand Inlet Branch, !- Branch 1 Name + CoolSys1 Demand Load Branch 1, !- Branch 2 Name + CoolSys1 Demand Load Branch 2, !- Branch 3 Name + CoolSys1 Demand Load Branch 3, !- Branch 4 Name + CoolSys1 Demand Load Branch 4, !- Branch 5 Name + CoolSys1 Demand Outlet Branch; !- Branch 6 Name + + + + BranchList, + TowerWaterSys Supply Branches, !- Name + TowerWaterSys Supply Inlet Branch, !- Branch 1 Name + TowerWaterSys Supply Equipment Branch 1, !- Branch 2 Name + TowerWaterSys Supply Equipment Branch 2, !- Branch 3 Name + TowerWaterSys Supply Equipment Bypass Branch, !- Branch 4 Name + TowerWaterSys Supply Outlet Branch; !- Branch 5 Name + + + + BranchList, + TowerWaterSys Demand Branches, !- Name + TowerWaterSys Demand Inlet Branch, !- Branch 1 Name + TowerWaterSys Demand Load Branch 1, !- Branch 2 Name + TowerWaterSys Demand Load Branch 2, !- Branch 3 Name + TowerWaterSys Demand Bypass Branch, !- Branch 4 Name + TowerWaterSys Demand Outlet Branch; !- Branch 5 Name + +!- Data Center Branch List + + + BranchList, + AirLoop DataCenter Basement Branches, !- Name + AirLoop DataCenter Basement Main Branch; !- Branch 1 Name + + + + BranchList, + AirLoop DataCenter bot Branches, !- Name + AirLoop DataCenter bot Main Branch; !- Branch 1 Name + + + + BranchList, + AirLoop DataCenter mid Branches, !- Name + AirLoop DataCenter mid Main Branch; !- Branch 1 Name + + + + BranchList, + AirLoop DataCenter top Branches, !- Name + AirLoop DataCenter top Main Branch; !- Branch 1 Name + +!- Data Center Supply and Demand Side Branch List + + + BranchList, + Plant Supply Side Branches, !- Name + Plant Supply Inlet Branch, !- Branch 1 Name + Plant Supply Tower Branch, !- Branch 2 Name + Dummy Boiler Branch, !- Branch 3 Name + Plant Supply Bypass Branch, !- Branch 4 Name + Plant Supply Outlet Branch; !- Branch 5 Name + + + + BranchList, + Plant Demand Side Branches, !- Name + Plant Demand Inlet Branch, !- Branch 1 Name + WLHP Cooling Plant Branch AirLoop DataCenter Basement, !- Branch 2 Name + WLHP Heating Plant Branch AirLoop DataCenter Basement, !- Branch 3 Name + WLHP Cooling Plant Branch AirLoop DataCenter bot, !- Branch 4 Name + WLHP Heating Plant Branch AirLoop DataCenter bot, !- Branch 5 Name + WLHP Cooling Plant Branch AirLoop DataCenter mid, !- Branch 6 Name + WLHP Heating Plant Branch AirLoop DataCenter mid, !- Branch 7 Name + WLHP Cooling Plant Branch AirLoop DataCenter top, !- Branch 8 Name + WLHP Heating Plant Branch AirLoop DataCenter top, !- Branch 9 Name + Plant Demand Bypass Branch, !- Branch 10 Name + Plant Demand Outlet Branch; !- Branch 11 Name + +!- =========== ALL OBJECTS IN CLASS: CONNECTOR LIST =========== + + + ConnectorList, + SHWSys1 Supply Connectors, !- Name + Connector:Splitter, !- Connector 1 Object Type + SHWSys1 Supply Splitter, !- Connector 1 Name + Connector:Mixer, !- Connector 2 Object Type + SHWSys1 Supply Mixer; !- Connector 2 Name + + + + ConnectorList, + SHWSys1 Demand Connectors, !- Name + Connector:Splitter, !- Connector 1 Object Type + SHWSys1 Demand Splitter, !- Connector 1 Name + Connector:Mixer, !- Connector 2 Object Type + SHWSys1 Demand Mixer; !- Connector 2 Name + + + + ConnectorList, + HeatSys1 Supply Connectors, !- Name + Connector:Splitter, !- Connector 1 Object Type + HeatSys1 Supply Splitter,!- Connector 1 Name + Connector:Mixer, !- Connector 2 Object Type + HeatSys1 Supply Mixer; !- Connector 2 Name + + + + ConnectorList, + HeatSys1 Demand Connectors, !- Name + Connector:Splitter, !- Connector 1 Object Type + HeatSys1 Demand Splitter,!- Connector 1 Name + Connector:Mixer, !- Connector 2 Object Type + HeatSys1 Demand Mixer; !- Connector 2 Name + + + + ConnectorList, + CoolSys1 Supply Connectors, !- Name + Connector:Splitter, !- Connector 1 Object Type + CoolSys1 Supply Splitter,!- Connector 1 Name + Connector:Mixer, !- Connector 2 Object Type + CoolSys1 Supply Mixer; !- Connector 2 Name + + + + ConnectorList, + CoolSys1 Demand Connectors, !- Name + Connector:Splitter, !- Connector 1 Object Type + CoolSys1 Demand Splitter,!- Connector 1 Name + Connector:Mixer, !- Connector 2 Object Type + CoolSys1 Demand Mixer; !- Connector 2 Name + + + + ConnectorList, + TowerWaterSys Supply Connectors, !- Name + Connector:Splitter, !- Connector 1 Object Type + TowerWaterSys Supply Splitter, !- Connector 1 Name + Connector:Mixer, !- Connector 2 Object Type + TowerWaterSys Supply Mixer; !- Connector 2 Name + + + + ConnectorList, + TowerWaterSys Demand Connectors, !- Name + Connector:Splitter, !- Connector 1 Object Type + TowerWaterSys Demand Splitter, !- Connector 1 Name + Connector:Mixer, !- Connector 2 Object Type + TowerWaterSys Demand Mixer; !- Connector 2 Name + +!- Data Center Connector List + + + ConnectorList, + Plant Supply Side Connectors, !- Name + Connector:Splitter, !- Connector 1 Object Type + Plant Supply Splitter, !- Connector 1 Name + Connector:Mixer, !- Connector 2 Object Type + Plant Supply Mixer; !- Connector 2 Name + + + + ConnectorList, + Plant Demand Side Connectors, !- Name + Connector:Splitter, !- Connector 1 Object Type + Plant Demand Splitter, !- Connector 1 Name + Connector:Mixer, !- Connector 2 Object Type + Plant Demand Mixer; !- Connector 2 Name + +!- =========== ALL OBJECTS IN CLASS: BRANCH =========== + + + Branch, + CAV_bas Air Loop Main Branch, !- Name + AUTOSIZE, !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type + CAV_bas_OA, !- Component 1 Name + CAV_bas Supply Equipment Inlet Node, !- Component 1 Inlet Node Name + CAV_bas_OA-CAV_CoolCNode,!- Component 1 Outlet Node Name + Passive, !- Component 1 Branch Control Type + Coil:Cooling:Water, !- Component 2 Object Type + CAV_bas_CoolC, !- Component 2 Name + CAV_bas_OA-CAV_CoolCNode,!- Component 2 Inlet Node Name + CAV_bas_CoolC-CAV_HeatCNode, !- Component 2 Outlet Node Name + Passive, !- Component 2 Branch Control Type + Coil:Heating:Water, !- Component 3 Object Type + CAV_bas_HeatC, !- Component 3 Name + CAV_bas_CoolC-CAV_HeatCNode, !- Component 3 Inlet Node Name + CAV_bas_HeatC-CAV_FanNode, !- Component 3 Outlet Node Name + Passive, !- Component 3 Branch Control Type + Fan:ConstantVolume, !- Component 4 Object Type + CAV_bas Fan, !- Component 4 Name + CAV_bas_HeatC-CAV_FanNode, !- Component 4 Inlet Node Name + CAV_bas Supply Equipment Outlet Node, !- Component 4 Outlet Node Name + Active; !- Component 4 Branch Control Type + + + + Branch, + VAV_bot WITH REHEAT Air Loop Main Branch, !- Name + AUTOSIZE, !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type + VAV_bot WITH REHEAT_OA, !- Component 1 Name + VAV_bot WITH REHEAT Supply Equipment Inlet Node, !- Component 1 Inlet Node Name + VAV_bot WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Component 1 Outlet Node Name + Passive, !- Component 1 Branch Control Type + Coil:Cooling:Water, !- Component 2 Object Type + VAV_bot WITH REHEAT_CoolC, !- Component 2 Name + VAV_bot WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Component 2 Inlet Node Name + VAV_bot WITH REHEAT_CoolC-VAV WITH REHEAT_HeatCNode, !- Component 2 Outlet Node Name + Passive, !- Component 2 Branch Control Type + Coil:Heating:Water, !- Component 3 Object Type + VAV_bot WITH REHEAT_HeatC, !- Component 3 Name + VAV_bot WITH REHEAT_CoolC-VAV WITH REHEAT_HeatCNode, !- Component 3 Inlet Node Name + VAV_bot WITH REHEAT_HeatC-VAV WITH REHEAT FanNode, !- Component 3 Outlet Node Name + Passive, !- Component 3 Branch Control Type + Fan:VariableVolume, !- Component 4 Object Type + VAV_bot WITH REHEAT Fan, !- Component 4 Name + VAV_bot WITH REHEAT_HeatC-VAV WITH REHEAT FanNode, !- Component 4 Inlet Node Name + VAV_bot WITH REHEAT Supply Equipment Outlet Node, !- Component 4 Outlet Node Name + Active; !- Component 4 Branch Control Type + + + + Branch, + VAV_mid WITH REHEAT Air Loop Main Branch, !- Name + AUTOSIZE, !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type + VAV_mid WITH REHEAT_OA, !- Component 1 Name + VAV_mid WITH REHEAT Supply Equipment Inlet Node, !- Component 1 Inlet Node Name + VAV_mid WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Component 1 Outlet Node Name + Passive, !- Component 1 Branch Control Type + Coil:Cooling:Water, !- Component 2 Object Type + VAV_mid WITH REHEAT_CoolC, !- Component 2 Name + VAV_mid WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Component 2 Inlet Node Name + VAV_mid WITH REHEAT_CoolC-VAV WITH REHEAT_HeatCNode, !- Component 2 Outlet Node Name + Passive, !- Component 2 Branch Control Type + Coil:Heating:Water, !- Component 3 Object Type + VAV_mid WITH REHEAT_HeatC, !- Component 3 Name + VAV_mid WITH REHEAT_CoolC-VAV WITH REHEAT_HeatCNode, !- Component 3 Inlet Node Name + VAV_mid WITH REHEAT_HeatC-VAV WITH REHEAT FanNode, !- Component 3 Outlet Node Name + Passive, !- Component 3 Branch Control Type + Fan:VariableVolume, !- Component 4 Object Type + VAV_mid WITH REHEAT Fan, !- Component 4 Name + VAV_mid WITH REHEAT_HeatC-VAV WITH REHEAT FanNode, !- Component 4 Inlet Node Name + VAV_mid WITH REHEAT Supply Equipment Outlet Node, !- Component 4 Outlet Node Name + Active; !- Component 4 Branch Control Type + + + + Branch, + VAV_top WITH REHEAT Air Loop Main Branch, !- Name + AUTOSIZE, !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type + VAV_top WITH REHEAT_OA, !- Component 1 Name + VAV_top WITH REHEAT Supply Equipment Inlet Node, !- Component 1 Inlet Node Name + VAV_top WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Component 1 Outlet Node Name + Passive, !- Component 1 Branch Control Type + Coil:Cooling:Water, !- Component 2 Object Type + VAV_top WITH REHEAT_CoolC, !- Component 2 Name + VAV_top WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Component 2 Inlet Node Name + VAV_top WITH REHEAT_CoolC-VAV WITH REHEAT_HeatCNode, !- Component 2 Outlet Node Name + Passive, !- Component 2 Branch Control Type + Coil:Heating:Water, !- Component 3 Object Type + VAV_top WITH REHEAT_HeatC, !- Component 3 Name + VAV_top WITH REHEAT_CoolC-VAV WITH REHEAT_HeatCNode, !- Component 3 Inlet Node Name + VAV_top WITH REHEAT_HeatC-VAV WITH REHEAT FanNode, !- Component 3 Outlet Node Name + Passive, !- Component 3 Branch Control Type + Fan:VariableVolume, !- Component 4 Object Type + VAV_top WITH REHEAT Fan, !- Component 4 Name + VAV_top WITH REHEAT_HeatC-VAV WITH REHEAT FanNode, !- Component 4 Inlet Node Name + VAV_top WITH REHEAT Supply Equipment Outlet Node, !- Component 4 Outlet Node Name + Active; !- Component 4 Branch Control Type + + + Branch, + SHWSys1 Supply Inlet Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pump:ConstantSpeed, !- Component 1 Object Type + SHWSys1 Pump, !- Component 1 Name + SHWSys1 Supply Inlet Node, !- Component 1 Inlet Node Name + SHWSys1 Pump-SHWSys1 Water HeaterNodeviaConnector, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + Branch, + SHWSys1 Supply Equipment Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + WaterHeater:Mixed, !- Component 1 Object Type + SHWSys1 Water Heater, !- Component 1 Name + SHWSys1 Pump-SHWSys1 Water HeaterNode, !- Component 1 Inlet Node Name + SHWSys1 Supply Equipment Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + SHWSys1 Supply Equipment Bypass Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + SHWSys1 Supply Equipment Bypass Pipe, !- Component 1 Name + SHWSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name + SHWSys1 Supply Equip Bypass Outlet Node, !- Component 1 Outlet Node Name + Bypass; !- Component 1 Branch Control Type + + + + Branch, + SHWSys1 Supply Outlet Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + SHWSys1 Supply Outlet Pipe, !- Component 1 Name + SHWSys1 Supply Mixer-SHWSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name + SHWSys1 Supply Outlet Node, !- Component 1 Outlet Node Name + Passive; !- Component 1 Branch Control Type + + + + Branch, + SHWSys1 Demand Inlet Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + SHWSys1 Demand Inlet Pipe, !- Component 1 Name + SHWSys1 Demand Inlet Node, !- Component 1 Inlet Node Name + SHWSys1 Demand Inlet Pipe-SHWSys1 Demand Mixer, !- Component 1 Outlet Node Name + Passive; !- Component 1 Branch Control Type + + + + Branch, + SHWSys1 Demand Load Branch 1, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + WaterUse:Connections, !- Component 1 Object Type + Core_bottom sub cat, !- Component 1 Name + Core_bottom sub cat Water Inlet Node, !- Component 1 Inlet Node Name + Core_bottom sub cat Water Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + SHWSys1 Demand Load Branch 2, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + WaterUse:Connections, !- Component 1 Object Type + Core_mid sub cat, !- Component 1 Name + Core_mid sub cat Water Inlet Node, !- Component 1 Inlet Node Name + Core_mid sub cat Water Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + SHWSys1 Demand Load Branch 3, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + WaterUse:Connections, !- Component 1 Object Type + Core_top sub cat, !- Component 1 Name + Core_top sub cat Water Inlet Node, !- Component 1 Inlet Node Name + Core_top sub cat Water Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + SHWSys1 Demand Bypass Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + SHWSys1 Demand Bypass Pipe, !- Component 1 Name + SHWSys1 Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name + SHWSys1 Demand Bypass Pipe Outlet Node, !- Component 1 Outlet Node Name + Bypass; !- Component 1 Branch Control Type + + + + Branch, + SHWSys1 Demand Outlet Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + SHWSys1 Demand Outlet Pipe, !- Component 1 Name + SHWSys1 Demand Mixer-SHWSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name + SHWSys1 Demand Outlet Node, !- Component 1 Outlet Node Name + Passive; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Supply Inlet Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pump:VariableSpeed, !- Component 1 Object Type + HeatSys1 Pump, !- Component 1 Name + HeatSys1 Supply Inlet Node, !- Component 1 Inlet Node Name + HeatSys1 Pump-HeatSys1 BoilerNodeviaConnector, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Supply Equipment Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Boiler:HotWater, !- Component 1 Object Type + HeatSys1 Boiler, !- Component 1 Name + HeatSys1 Pump-HeatSys1 BoilerNode, !- Component 1 Inlet Node Name + HeatSys1 Supply Equipment Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Supply Equipment Bypass Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + HeatSys1 Supply Equipment Bypass Pipe, !- Component 1 Name + HeatSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name + HeatSys1 Supply Equip Bypass Outlet Node, !- Component 1 Outlet Node Name + Bypass; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Supply Outlet Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + HeatSys1 Supply Outlet Pipe, !- Component 1 Name + HeatSys1 Supply Mixer-HeatSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name + HeatSys1 Supply Outlet Node, !- Component 1 Outlet Node Name + Passive; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Demand Inlet Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + HeatSys1 Demand Inlet Pipe, !- Component 1 Name + HeatSys1 Demand Inlet Node, !- Component 1 Inlet Node Name + HeatSys1 Demand Inlet Pipe-HeatSys1 Demand Mixer, !- Component 1 Outlet Node Name + Passive; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Demand Load Branch 1, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Heating:Water, !- Component 1 Object Type + Core_bottom VAV Box Reheat Coil, !- Component 1 Name + Core_bottom VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name + Core_bottom VAV Box Reheat CoilDemand Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Demand Load Branch 2, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Heating:Water, !- Component 1 Object Type + Core_mid VAV Box Reheat Coil, !- Component 1 Name + Core_mid VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name + Core_mid VAV Box Reheat CoilDemand Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Demand Load Branch 3, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Heating:Water, !- Component 1 Object Type + Core_top VAV Box Reheat Coil, !- Component 1 Name + Core_top VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name + Core_top VAV Box Reheat CoilDemand Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Demand Load Branch 4, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Heating:Water, !- Component 1 Object Type + Perimeter_bot_ZN_3 VAV Box Reheat Coil, !- Component 1 Name + Perimeter_bot_ZN_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name + Perimeter_bot_ZN_3 VAV Box Reheat CoilDemand Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Demand Load Branch 5, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Heating:Water, !- Component 1 Object Type + Perimeter_bot_ZN_2 VAV Box Reheat Coil, !- Component 1 Name + Perimeter_bot_ZN_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name + Perimeter_bot_ZN_2 VAV Box Reheat CoilDemand Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Demand Load Branch 6, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Heating:Water, !- Component 1 Object Type + Perimeter_bot_ZN_1 VAV Box Reheat Coil, !- Component 1 Name + Perimeter_bot_ZN_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name + Perimeter_bot_ZN_1 VAV Box Reheat CoilDemand Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Demand Load Branch 7, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Heating:Water, !- Component 1 Object Type + Perimeter_bot_ZN_4 VAV Box Reheat Coil, !- Component 1 Name + Perimeter_bot_ZN_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name + Perimeter_bot_ZN_4 VAV Box Reheat CoilDemand Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Demand Load Branch 8, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Heating:Water, !- Component 1 Object Type + Perimeter_mid_ZN_3 VAV Box Reheat Coil, !- Component 1 Name + Perimeter_mid_ZN_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name + Perimeter_mid_ZN_3 VAV Box Reheat CoilDemand Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Demand Load Branch 9, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Heating:Water, !- Component 1 Object Type + Perimeter_mid_ZN_2 VAV Box Reheat Coil, !- Component 1 Name + Perimeter_mid_ZN_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name + Perimeter_mid_ZN_2 VAV Box Reheat CoilDemand Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Demand Load Branch 10, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Heating:Water, !- Component 1 Object Type + Perimeter_mid_ZN_1 VAV Box Reheat Coil, !- Component 1 Name + Perimeter_mid_ZN_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name + Perimeter_mid_ZN_1 VAV Box Reheat CoilDemand Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Demand Load Branch 11, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Heating:Water, !- Component 1 Object Type + Perimeter_mid_ZN_4 VAV Box Reheat Coil, !- Component 1 Name + Perimeter_mid_ZN_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name + Perimeter_mid_ZN_4 VAV Box Reheat CoilDemand Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Demand Load Branch 12, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Heating:Water, !- Component 1 Object Type + Perimeter_top_ZN_3 VAV Box Reheat Coil, !- Component 1 Name + Perimeter_top_ZN_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name + Perimeter_top_ZN_3 VAV Box Reheat CoilDemand Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Demand Load Branch 13, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Heating:Water, !- Component 1 Object Type + Perimeter_top_ZN_2 VAV Box Reheat Coil, !- Component 1 Name + Perimeter_top_ZN_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name + Perimeter_top_ZN_2 VAV Box Reheat CoilDemand Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Demand Load Branch 14, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Heating:Water, !- Component 1 Object Type + Perimeter_top_ZN_1 VAV Box Reheat Coil, !- Component 1 Name + Perimeter_top_ZN_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name + Perimeter_top_ZN_1 VAV Box Reheat CoilDemand Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Demand Load Branch 15, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Heating:Water, !- Component 1 Object Type + Perimeter_top_ZN_4 VAV Box Reheat Coil, !- Component 1 Name + Perimeter_top_ZN_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name + Perimeter_top_ZN_4 VAV Box Reheat CoilDemand Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + Branch, + HeatSys1 Demand Load Branch 17, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Heating:Water, !- Component 1 Object Type + VAV_bot WITH REHEAT_HeatC, !- Component 1 Name + VAV_bot WITH REHEAT_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name + VAV_bot WITH REHEAT_HeatCDemand Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Demand Load Branch 18, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Heating:Water, !- Component 1 Object Type + VAV_mid WITH REHEAT_HeatC, !- Component 1 Name + VAV_mid WITH REHEAT_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name + VAV_mid WITH REHEAT_HeatCDemand Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Demand Load Branch 19, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Heating:Water, !- Component 1 Object Type + VAV_top WITH REHEAT_HeatC, !- Component 1 Name + VAV_top WITH REHEAT_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name + VAV_top WITH REHEAT_HeatCDemand Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Demand Load Branch 20, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Heating:Water, !- Component 1 Object Type + CAV_bas_HeatC, !- Component 1 Name + CAV_bas_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name + CAV_bas_HeatCDemand Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Demand Load Branch 21, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Heating:Water, !- Component 1 Object Type + DataCenter_ExtraWaterHeatC, !- Component 1 Name + DataCenter_ExtraWaterHeatCDemand Inlet Node, !- Component 1 Inlet Node Name + DataCenter_ExtraWaterHeatCDemand Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Demand Bypass Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + HeatSys1 Demand Bypass Pipe, !- Component 1 Name + HeatSys1 Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name + HeatSys1 Demand Bypass Pipe Outlet Node, !- Component 1 Outlet Node Name + Bypass; !- Component 1 Branch Control Type + + + + Branch, + HeatSys1 Demand Outlet Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + HeatSys1 Demand Outlet Pipe, !- Component 1 Name + HeatSys1 Demand Mixer-HeatSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name + HeatSys1 Demand Outlet Node, !- Component 1 Outlet Node Name + Passive; !- Component 1 Branch Control Type + + + + Branch, + CoolSys1 Supply Inlet Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + CoolSys1 Supply Inlet Pipe, !- Component 1 Name + CoolSys1 Supply Inlet Node, !- Component 1 Inlet Node Name + CoolSys1 Pump-CoolSys1 ChillerNodeviaConnector, !- Component 1 Outlet Node Name + Passive; !- Component 1 Branch Control Type + + Branch, + CoolSys1 Supply Equipment Branch 1, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pump:ConstantSpeed, !- Component 1 Object Type + CoolSys1 Chiller1 Pump, !- Component 1 Name + CoolSys1 Chiller1 Pump Inlet Node, !- Component 1 Inlet Node Name + CoolSys1 Pump-CoolSys1 Chiller1Node, !- Component 1 Outlet Node Name + Active, !- Component 1 Branch Control Type + Chiller:Electric:ReformulatedEIR, !- Component 1 Object Type + CoolSys1 Chiller1, !- Component 1 Name + CoolSys1 Pump-CoolSys1 Chiller1Node, !- Component 1 Inlet Node Name + CoolSys1 Supply Equipment Outlet Node 1, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + Branch, + CoolSys1 Supply Equipment Branch 2, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pump:ConstantSpeed, !- Component 1 Object Type + CoolSys1 Chiller2 Pump, !- Component 1 Name + CoolSys1 Chiller2 Pump Inlet Node, !- Component 1 Inlet Node Name + CoolSys1 Pump-CoolSys1 Chiller2Node, !- Component 1 Outlet Node Name + Active, !- Component 1 Branch Control Type + Chiller:Electric:ReformulatedEIR, !- Component 1 Object Type + CoolSys1 Chiller2, !- Component 1 Name + CoolSys1 Pump-CoolSys1 Chiller2Node, !- Component 1 Inlet Node Name + CoolSys1 Supply Equipment Outlet Node 2, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + CoolSys1 Supply Equipment Bypass Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + CoolSys1 Supply Equipment Bypass Pipe, !- Component 1 Name + CoolSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name + CoolSys1 Supply Equip Bypass Outlet Node, !- Component 1 Outlet Node Name + Bypass; !- Component 1 Branch Control Type + + + + Branch, + CoolSys1 Supply Outlet Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + CoolSys1 Supply Outlet Pipe, !- Component 1 Name + CoolSys1 Supply Mixer-CoolSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name + CoolSys1 Supply Outlet Node, !- Component 1 Outlet Node Name + Passive; !- Component 1 Branch Control Type + + + + Branch, + CoolSys1 Demand Inlet Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pump:VariableSpeed, !- Component 1 Object Type + CoolSys1 Pump Secondary, !- Component 1 Name + CoolSys1 Demand Inlet Node, !- Component 1 Inlet Node Name + CoolSys1 Pump Secondary-CoolSys1 Demand Mixer, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + CoolSys1 Demand Load Branch 1, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Cooling:Water, !- Component 1 Object Type + VAV_bot WITH REHEAT_CoolC, !- Component 1 Name + VAV_bot WITH REHEAT_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name + VAV_bot WITH REHEAT_CoolCDemand Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + CoolSys1 Demand Load Branch 2, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Cooling:Water, !- Component 1 Object Type + VAV_mid WITH REHEAT_CoolC, !- Component 1 Name + VAV_mid WITH REHEAT_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name + VAV_mid WITH REHEAT_CoolCDemand Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + CoolSys1 Demand Load Branch 3, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Cooling:Water, !- Component 1 Object Type + VAV_top WITH REHEAT_CoolC, !- Component 1 Name + VAV_top WITH REHEAT_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name + VAV_top WITH REHEAT_CoolCDemand Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + CoolSys1 Demand Load Branch 4, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Cooling:Water, !- Component 1 Object Type + CAV_bas_CoolC, !- Component 1 Name + CAV_bas_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name + CAV_bas_CoolCDemand Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + Branch, + CoolSys1 Demand Outlet Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + CoolSys1 Demand Outlet Pipe, !- Component 1 Name + CoolSys1 Demand Mixer-CoolSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name + CoolSys1 Demand Outlet Node, !- Component 1 Outlet Node Name + Passive; !- Component 1 Branch Control Type + + + + Branch, + TowerWaterSys Supply Inlet Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + HeaderedPumps:VariableSpeed, !- Component 1 Object Type + TowerWaterSys Pump, !- Component 1 Name + TowerWaterSys Supply Inlet Node, !- Component 1 Inlet Node Name + TowerWaterSys Pump-TowerWaterSys CoolTowerNodeviaConnector, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + TowerWaterSys Supply Equipment Branch 1, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + CoolingTower:VariableSpeed, !- Component 1 Object Type + TowerWaterSys CoolTower 1, !- Component 1 Name + TowerWaterSys Pump-TowerWaterSys CoolTower1Node, !- Component 1 Inlet Node Name + TowerWaterSys Supply Equipment Outlet Node 1, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + TowerWaterSys Supply Equipment Branch 2, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + CoolingTower:VariableSpeed, !- Component 1 Object Type + TowerWaterSys CoolTower 2, !- Component 1 Name + TowerWaterSys Pump-TowerWaterSys CoolTower2Node, !- Component 1 Inlet Node Name + TowerWaterSys Supply Equipment Outlet Node 2, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + TowerWaterSys Supply Equipment Bypass Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + TowerWaterSys Supply Equipment Bypass Pipe, !- Component 1 Name + TowerWaterSys Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name + TowerWaterSys Supply Equip Bypass Outlet Node, !- Component 1 Outlet Node Name + Bypass; !- Component 1 Branch Control Type + + + + Branch, + TowerWaterSys Supply Outlet Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + TowerWaterSys Supply Outlet Pipe, !- Component 1 Name + TowerWaterSys Supply Mixer-TowerWaterSys Supply Outlet Pipe, !- Component 1 Inlet Node Name + TowerWaterSys Supply Outlet Node, !- Component 1 Outlet Node Name + Passive; !- Component 1 Branch Control Type + + + + Branch, + TowerWaterSys Demand Inlet Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + TowerWaterSys Demand Inlet Pipe, !- Component 1 Name + TowerWaterSys Demand Inlet Node, !- Component 1 Inlet Node Name + TowerWaterSys Demand Inlet Pipe-TowerWaterSys Demand Mixer, !- Component 1 Outlet Node Name + Passive; !- Component 1 Branch Control Type + + + + Branch, + TowerWaterSys Demand Load Branch 1, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Chiller:Electric:ReformulatedEIR, !- Component 1 Object Type + CoolSys1 Chiller1, !- Component 1 Name + CoolSys1 Chiller1 Water Inlet Node, !- Component 1 Inlet Node Name + CoolSys1 Chiller1 Water Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + TowerWaterSys Demand Load Branch 2, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Chiller:Electric:ReformulatedEIR, !- Component 1 Object Type + CoolSys1 Chiller2, !- Component 1 Name + CoolSys1 Chiller2 Water Inlet Node, !- Component 1 Inlet Node Name + CoolSys1 Chiller2 Water Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + TowerWaterSys Demand Bypass Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + TowerWaterSys Demand Bypass Pipe, !- Component 1 Name + TowerWaterSys Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name + TowerWaterSys Demand Bypass Pipe Outlet Node, !- Component 1 Outlet Node Name + Bypass; !- Component 1 Branch Control Type + + + + Branch, + TowerWaterSys Demand Outlet Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + TowerWaterSys Demand Outlet Pipe, !- Component 1 Name + TowerWaterSys Demand Mixer-TowerWaterSys Demand Outlet Pipe, !- Component 1 Inlet Node Name + TowerWaterSys Demand Outlet Node, !- Component 1 Outlet Node Name + Passive; !- Component 1 Branch Control Type + +!- Adding Data Center Branches +!- Main Branches for each zone + + + Branch, + AirLoop DataCenter Basement Main Branch, !- Name + autosize, !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type + AirLoop DataCenter Basement OA System, !- Component 1 Name + AirLoop DataCenter Basement Return Air Inlet, !- Component 1 Inlet Node Name + DataCenter Basement Mixed Air Outlet, !- Component 1 Outlet Node Name + Passive, !- Component 1 Branch Control Type + AirLoopHVAC:UnitaryHeatPump:WaterToAir, !- Component 2 Object Type + AirLoop DataCenter Basement DXAC Heat Pump, !- Component 2 Name + DataCenter Basement Mixed Air Outlet, !- Component 2 Inlet Node Name + AirLoop DataCenter Basement Humidifier Inlet, !- Component 2 Outlet Node Name + Active, !- Component 2 Branch Control Type + Humidifier:Steam:Electric, !- Component 3 Object Type + DataCenter Basement Humidifier, !- Component 3 Name + AirLoop DataCenter Basement Humidifier Inlet, !- Component 3 Inlet Node Name + DataCenter_Humidifier-DataCenter_ExtraElecHeatCNode, !- Component 3 Outlet Node Name + Passive, !- Component 3 Branch Control Type + Coil:Heating:Electric, !- Component 4 Object Type + DataCenter_ExtraElecHeatC, !- Component 4 Name + DataCenter_Humidifier-DataCenter_ExtraElecHeatCNode, !- Component 4 Inlet Node Name + DataCenter_ExtraElecHeatC-DataCenter_ExtraWaterHeatCNode, !- Component 4 Outlet Node Name + Passive, !- Component 4 Branch Control Type + Coil:Heating:Water, !- Component 5 Object Type + DataCenter_ExtraWaterHeatC, !- Component 5 Name + DataCenter_ExtraElecHeatC-DataCenter_ExtraWaterHeatCNode, !- Component 5 Inlet Node Name + AirLoop DataCenter Basement Supply Air Outlet, !- Component 5 Outlet Node Name + Passive; !- Component 5 Branch Control Type + + + + Branch, + AirLoop DataCenter bot Main Branch, !- Name + autosize, !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type + AirLoop DataCenter bot OA System, !- Component 1 Name + AirLoop DataCenter bot Return Air Inlet, !- Component 1 Inlet Node Name + DataCenter bot Mixed Air Outlet, !- Component 1 Outlet Node Name + Passive, !- Component 1 Branch Control Type + AirLoopHVAC:UnitaryHeatPump:WaterToAir, !- Component 2 Object Type + AirLoop DataCenter bot DXAC Heat Pump, !- Component 2 Name + DataCenter bot Mixed Air Outlet, !- Component 2 Inlet Node Name + AirLoop DataCenter bot Supply Air Outlet, !- Component 2 Outlet Node Name + Active; !- Component 2 Branch Control Type + + + + Branch, + AirLoop DataCenter mid Main Branch, !- Name + autosize, !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type + AirLoop DataCenter mid OA System, !- Component 1 Name + AirLoop DataCenter mid Return Air Inlet, !- Component 1 Inlet Node Name + DataCenter mid Mixed Air Outlet, !- Component 1 Outlet Node Name + Passive, !- Component 1 Branch Control Type + AirLoopHVAC:UnitaryHeatPump:WaterToAir, !- Component 2 Object Type + AirLoop DataCenter mid DXAC Heat Pump, !- Component 2 Name + DataCenter mid Mixed Air Outlet, !- Component 2 Inlet Node Name + AirLoop DataCenter mid Supply Air Outlet, !- Component 2 Outlet Node Name + Active; !- Component 2 Branch Control Type + + + + Branch, + AirLoop DataCenter top Main Branch, !- Name + autosize, !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type + AirLoop DataCenter top OA System, !- Component 1 Name + AirLoop DataCenter top Return Air Inlet, !- Component 1 Inlet Node Name + DataCenter top Mixed Air Outlet, !- Component 1 Outlet Node Name + Passive, !- Component 1 Branch Control Type + AirLoopHVAC:UnitaryHeatPump:WaterToAir, !- Component 2 Object Type + AirLoop DataCenter top DXAC Heat Pump, !- Component 2 Name + DataCenter top Mixed Air Outlet, !- Component 2 Inlet Node Name + AirLoop DataCenter top Supply Air Outlet, !- Component 2 Outlet Node Name + Active; !- Component 2 Branch Control Type + +!- Data Center Plant Supply Side Branches + + + Branch, + Plant Supply Inlet Branch, !- Name + 0, !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pump:ConstantSpeed, !- Component 1 Object Type + Plant Circ Pump, !- Component 1 Name + Plant Supply Inlet Node, !- Component 1 Inlet Node Name + Plant Pump Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + Plant Supply Tower Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + FluidCooler:TwoSpeed, !- Component 1 Object Type + Central Tower, !- Component 1 Name + Central Tower Inlet Node,!- Component 1 Inlet Node Name + Central Tower Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + Dummy Boiler Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Boiler:HotWater, !- Component 1 Object Type + Dummy Boiler, !- Component 1 Name + Dummy Boiler Inlet Node, !- Component 1 Inlet Node Name + Dummy Boiler Outlet Node,!- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + Plant Supply Bypass Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + Plant Supply Side Bypass,!- Component 1 Name + Plant Supply Bypass Inlet Node, !- Component 1 Inlet Node Name + Plant Supply Bypass Outlet Node, !- Component 1 Outlet Node Name + Bypass; !- Component 1 Branch Control Type + + + + Branch, + Plant Supply Outlet Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + Plant Supply Outlet, !- Component 1 Name + Plant Supply Exit Pipe Inlet Node, !- Component 1 Inlet Node Name + Plant Supply Outlet Node,!- Component 1 Outlet Node Name + Passive; !- Component 1 Branch Control Type + +!- Data Center Plant Demand Side Branches + + + Branch, + Plant Demand Inlet Branch, !- Name + , !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + Plant Demand Inlet Pipe, !- Component 1 Name + Plant Demand Inlet Node, !- Component 1 Inlet Node Name + Plant Demand Entrance Pipe Outlet Node, !- Component 1 Outlet Node Name + Passive; !- Component 1 Branch Control Type + + + + Branch, + Plant Demand Bypass Branch, !- Name + 0, !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + Plant Demand Side Bypass,!- Component 1 Name + Cond Demand Bypass Inlet Node, !- Component 1 Inlet Node Name + Cond Demand Bypass Outlet Node, !- Component 1 Outlet Node Name + Bypass; !- Component 1 Branch Control Type + + + + Branch, + Plant Demand Outlet Branch, !- Name + 0, !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Pipe:Adiabatic, !- Component 1 Object Type + Plant Demand Outlet Pipe,!- Component 1 Name + Plant Demand Exit Pipe Inlet Node, !- Component 1 Inlet Node Name + Plant Demand Outlet Node,!- Component 1 Outlet Node Name + Passive; !- Component 1 Branch Control Type + +!- Water Loop HP Heating and Cooling Branches + + + Branch, + WLHP Cooling Plant Branch AirLoop DataCenter Basement, !- Name + 0, !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Cooling:WaterToAirHeatPump:EquationFit, !- Component 1 Object Type + Heat Pump Cooling Mode AirLoop DataCenter Basement, !- Component 1 Name + AirLoop DataCenter Basement Water to Air Heat Pump Source Side1 Inlet Node, !- Component 1 Inlet Node Name + AirLoop DataCenter Basement Water to Air Heat Pump Source Side1 Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + WLHP Heating Plant Branch AirLoop DataCenter Basement, !- Name + 0, !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Heating:WaterToAirHeatPump:EquationFit, !- Component 1 Object Type + Heat Pump Heating Mode AirLoop DataCenter Basement, !- Component 1 Name + AirLoop DataCenter Basement Water to Air Heat Pump Source Side2 Inlet Node, !- Component 1 Inlet Node Name + AirLoop DataCenter Basement Water to Air Heat Pump Source Side2 Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + WLHP Cooling Plant Branch AirLoop DataCenter bot, !- Name + 0, !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Cooling:WaterToAirHeatPump:EquationFit, !- Component 1 Object Type + Heat Pump Cooling Mode AirLoop DataCenter bot, !- Component 1 Name + AirLoop DataCenter bot Water to Air Heat Pump Source Side1 Inlet Node, !- Component 1 Inlet Node Name + AirLoop DataCenter bot Water to Air Heat Pump Source Side1 Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + WLHP Cooling Plant Branch AirLoop DataCenter mid, !- Name + 0, !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Cooling:WaterToAirHeatPump:EquationFit, !- Component 1 Object Type + Heat Pump Cooling Mode AirLoop DataCenter mid, !- Component 1 Name + AirLoop DataCenter mid Water to Air Heat Pump Source Side1 Inlet Node, !- Component 1 Inlet Node Name + AirLoop DataCenter mid Water to Air Heat Pump Source Side1 Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + WLHP Cooling Plant Branch AirLoop DataCenter top, !- Name + 0, !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Cooling:WaterToAirHeatPump:EquationFit, !- Component 1 Object Type + Heat Pump Cooling Mode AirLoop DataCenter top, !- Component 1 Name + AirLoop DataCenter top Water to Air Heat Pump Source Side1 Inlet Node, !- Component 1 Inlet Node Name + AirLoop DataCenter top Water to Air Heat Pump Source Side1 Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + WLHP Heating Plant Branch AirLoop DataCenter bot, !- Name + 0, !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Heating:WaterToAirHeatPump:EquationFit, !- Component 1 Object Type + Heat Pump Heating Mode AirLoop DataCenter bot, !- Component 1 Name + AirLoop DataCenter bot Water to Air Heat Pump Source Side2 Inlet Node, !- Component 1 Inlet Node Name + AirLoop DataCenter bot Water to Air Heat Pump Source Side2 Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + WLHP Heating Plant Branch AirLoop DataCenter mid, !- Name + 0, !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Heating:WaterToAirHeatPump:EquationFit, !- Component 1 Object Type + Heat Pump Heating Mode AirLoop DataCenter mid, !- Component 1 Name + AirLoop DataCenter mid Water to Air Heat Pump Source Side2 Inlet Node, !- Component 1 Inlet Node Name + AirLoop DataCenter mid Water to Air Heat Pump Source Side2 Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + + + + Branch, + WLHP Heating Plant Branch AirLoop DataCenter top, !- Name + 0, !- Maximum Flow Rate {m3/s} + , !- Pressure Drop Curve Name + Coil:Heating:WaterToAirHeatPump:EquationFit, !- Component 1 Object Type + Heat Pump Heating Mode AirLoop DataCenter top, !- Component 1 Name + AirLoop DataCenter top Water to Air Heat Pump Source Side2 Inlet Node, !- Component 1 Inlet Node Name + AirLoop DataCenter top Water to Air Heat Pump Source Side2 Outlet Node, !- Component 1 Outlet Node Name + Active; !- Component 1 Branch Control Type + +!- =========== ALL OBJECTS IN CLASS: PIPE =========== + + + Pipe:Adiabatic, + SHWSys1 Supply Equipment Bypass Pipe, !- Name + SHWSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name + SHWSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name + + + + Pipe:Adiabatic, + SHWSys1 Supply Outlet Pipe, !- Name + SHWSys1 Supply Mixer-SHWSys1 Supply Outlet Pipe, !- Inlet Node Name + SHWSys1 Supply Outlet Node; !- Outlet Node Name + + + + Pipe:Adiabatic, + SHWSys1 Demand Inlet Pipe, !- Name + SHWSys1 Demand Inlet Node, !- Inlet Node Name + SHWSys1 Demand Inlet Pipe-SHWSys1 Demand Mixer; !- Outlet Node Name + + + + Pipe:Adiabatic, + SHWSys1 Demand Bypass Pipe, !- Name + SHWSys1 Demand Bypass Pipe Inlet Node, !- Inlet Node Name + SHWSys1 Demand Bypass Pipe Outlet Node; !- Outlet Node Name + + + + Pipe:Adiabatic, + SHWSys1 Demand Outlet Pipe, !- Name + SHWSys1 Demand Mixer-SHWSys1 Demand Outlet Pipe, !- Inlet Node Name + SHWSys1 Demand Outlet Node; !- Outlet Node Name + + + + Pipe:Adiabatic, + HeatSys1 Supply Equipment Bypass Pipe, !- Name + HeatSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name + HeatSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name + + + + Pipe:Adiabatic, + HeatSys1 Supply Outlet Pipe, !- Name + HeatSys1 Supply Mixer-HeatSys1 Supply Outlet Pipe, !- Inlet Node Name + HeatSys1 Supply Outlet Node; !- Outlet Node Name + + + + Pipe:Adiabatic, + HeatSys1 Demand Inlet Pipe, !- Name + HeatSys1 Demand Inlet Node, !- Inlet Node Name + HeatSys1 Demand Inlet Pipe-HeatSys1 Demand Mixer; !- Outlet Node Name + + + + Pipe:Adiabatic, + HeatSys1 Demand Bypass Pipe, !- Name + HeatSys1 Demand Bypass Pipe Inlet Node, !- Inlet Node Name + HeatSys1 Demand Bypass Pipe Outlet Node; !- Outlet Node Name + + + + Pipe:Adiabatic, + HeatSys1 Demand Outlet Pipe, !- Name + HeatSys1 Demand Mixer-HeatSys1 Demand Outlet Pipe, !- Inlet Node Name + HeatSys1 Demand Outlet Node; !- Outlet Node Name + + + + Pipe:Adiabatic, + CoolSys1 Supply Inlet Pipe, !- Component 1 Name + CoolSys1 Supply Inlet Node, !- Component 1 Inlet Node Name + CoolSys1 Pump-CoolSys1 ChillerNodeviaConnector; !- Component 1 Outlet Node Name + + + + + Pipe:Adiabatic, + CoolSys1 Supply Equipment Bypass Pipe, !- Name + CoolSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name + CoolSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name + + + + Pipe:Adiabatic, + CoolSys1 Supply Outlet Pipe, !- Name + CoolSys1 Supply Mixer-CoolSys1 Supply Outlet Pipe, !- Inlet Node Name + CoolSys1 Supply Outlet Node; !- Outlet Node Name + + + + Pipe:Adiabatic, + CoolSys1 Demand Outlet Pipe, !- Name + CoolSys1 Demand Mixer-CoolSys1 Demand Outlet Pipe, !- Inlet Node Name + CoolSys1 Demand Outlet Node; !- Outlet Node Name + + + + Pipe:Adiabatic, + TowerWaterSys Supply Equipment Bypass Pipe, !- Name + TowerWaterSys Supply Equip Bypass Inlet Node, !- Inlet Node Name + TowerWaterSys Supply Equip Bypass Outlet Node; !- Outlet Node Name + + + + Pipe:Adiabatic, + TowerWaterSys Supply Outlet Pipe, !- Name + TowerWaterSys Supply Mixer-TowerWaterSys Supply Outlet Pipe, !- Inlet Node Name + TowerWaterSys Supply Outlet Node; !- Outlet Node Name + + + + Pipe:Adiabatic, + TowerWaterSys Demand Inlet Pipe, !- Name + TowerWaterSys Demand Inlet Node, !- Inlet Node Name + TowerWaterSys Demand Inlet Pipe-TowerWaterSys Demand Mixer; !- Outlet Node Name + + + + Pipe:Adiabatic, + TowerWaterSys Demand Bypass Pipe, !- Name + TowerWaterSys Demand Bypass Pipe Inlet Node, !- Inlet Node Name + TowerWaterSys Demand Bypass Pipe Outlet Node; !- Outlet Node Name + + + + Pipe:Adiabatic, + TowerWaterSys Demand Outlet Pipe, !- Name + TowerWaterSys Demand Mixer-TowerWaterSys Demand Outlet Pipe, !- Inlet Node Name + TowerWaterSys Demand Outlet Node; !- Outlet Node Name + +!- Data Center Adiabatic Pipes + + + Pipe:Adiabatic, + Plant Demand Inlet Pipe, !- Name + Plant Demand Inlet Node, !- Inlet Node Name + Plant Demand Entrance Pipe Outlet Node; !- Outlet Node Name + + + + Pipe:Adiabatic, + Plant Demand Side Bypass,!- Name + Cond Demand Bypass Inlet Node, !- Inlet Node Name + Cond Demand Bypass Outlet Node; !- Outlet Node Name + + + + Pipe:Adiabatic, + Plant Demand Outlet Pipe,!- Name + Plant Demand Exit Pipe Inlet Node, !- Inlet Node Name + Plant Demand Outlet Node;!- Outlet Node Name + + + + Pipe:Adiabatic, + Plant Supply Side Bypass,!- Name + Plant Supply Bypass Inlet Node, !- Inlet Node Name + Plant Supply Bypass Outlet Node; !- Outlet Node Name + + + + Pipe:Adiabatic, + Plant Supply Outlet, !- Name + Plant Supply Exit Pipe Inlet Node, !- Inlet Node Name + Plant Supply Outlet Node;!- Outlet Node Name + +!- =========== ALL OBJECTS IN CLASS: PLANT LOOP =========== +!***** PLANT Loop: SHWSys1 ***** + + + PlantLoop, + SHWSys1, !- Name + WATER, !- Fluid Type + , !- User Defined Fluid Type + SHWSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name + SHWSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name + 60.0, !- Maximum Loop Temperature {C} + 10.0, !- Minimum Loop Temperature {C} + AUTOSIZE, !- Maximum Loop Flow Rate {m3/s} + 0.0, !- Minimum Loop Flow Rate {m3/s} + AUTOSIZE, !- Plant Loop Volume {m3} + SHWSys1 Supply Inlet Node, !- Plant Side Inlet Node Name + SHWSys1 Supply Outlet Node, !- Plant Side Outlet Node Name + SHWSys1 Supply Branches, !- Plant Side Branch List Name + SHWSys1 Supply Connectors, !- Plant Side Connector List Name + SHWSys1 Demand Inlet Node, !- Demand Side Inlet Node Name + SHWSys1 Demand Outlet Node, !- Demand Side Outlet Node Name + SHWSys1 Demand Branches, !- Demand Side Branch List Name + SHWSys1 Demand Connectors, !- Demand Side Connector List Name + Optimal; !- Load Distribution Scheme + +!***** PLANT Loop: HeatSys1 ***** + + + PlantLoop, + HeatSys1, !- Name + WATER, !- Fluid Type + , !- User Defined Fluid Type + HeatSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name + HeatSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name + 100.0, !- Maximum Loop Temperature {C} + 10.0, !- Minimum Loop Temperature {C} + AUTOSIZE, !- Maximum Loop Flow Rate {m3/s} + 0.0, !- Minimum Loop Flow Rate {m3/s} + AUTOSIZE, !- Plant Loop Volume {m3} + HeatSys1 Supply Inlet Node, !- Plant Side Inlet Node Name + HeatSys1 Supply Outlet Node, !- Plant Side Outlet Node Name + HeatSys1 Supply Branches,!- Plant Side Branch List Name + HeatSys1 Supply Connectors, !- Plant Side Connector List Name + HeatSys1 Demand Inlet Node, !- Demand Side Inlet Node Name + HeatSys1 Demand Outlet Node, !- Demand Side Outlet Node Name + HeatSys1 Demand Branches,!- Demand Side Branch List Name + HeatSys1 Demand Connectors, !- Demand Side Connector List Name + Optimal; !- Load Distribution Scheme + +!***** PLANT Loop: CoolSys1 ***** + + + PlantLoop, + CoolSys1, !- Name + WATER, !- Fluid Type + , !- User Defined Fluid Type + CoolSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name + CoolSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name + 98.0, !- Maximum Loop Temperature {C} + 1.0, !- Minimum Loop Temperature {C} + AUTOSIZE, !- Maximum Loop Flow Rate {m3/s} + 0.0, !- Minimum Loop Flow Rate {m3/s} + autocalculate, !- Plant Loop Volume {m3} + CoolSys1 Supply Inlet Node, !- Plant Side Inlet Node Name + CoolSys1 Supply Outlet Node, !- Plant Side Outlet Node Name + CoolSys1 Supply Branches,!- Plant Side Branch List Name + CoolSys1 Supply Connectors, !- Plant Side Connector List Name + CoolSys1 Demand Inlet Node, !- Demand Side Inlet Node Name + CoolSys1 Demand Outlet Node, !- Demand Side Outlet Node Name + CoolSys1 Demand Branches,!- Demand Side Branch List Name + CoolSys1 Demand Connectors, !- Demand Side Connector List Name + Uniform, !- Load Distribution Scheme + , !- Availability Manager List Name + , !- Plant Loop Demand Calculation Scheme + TwoWayCommonPipe; !- Common Pipe Simulation + + + + PlantLoop, + Single Water Plant Loop, !- Name + UserDefinedFluidType, !- Fluid Type + EthyleneGlycol40Percent, !- User Defined Fluid Type + Plant Loop Operation, !- Plant Equipment Operation Scheme Name + Plant Supply Outlet Node,!- Loop Temperature Setpoint Node Name + 35, !- Maximum Loop Temperature {C} + 10, !- Minimum Loop Temperature {C} + autosize, !- Maximum Loop Flow Rate {m3/s} + 0, !- Minimum Loop Flow Rate {m3/s} + autocalculate, !- Plant Loop Volume {m3} + Plant Supply Inlet Node, !- Plant Side Inlet Node Name + Plant Supply Outlet Node,!- Plant Side Outlet Node Name + Plant Supply Side Branches, !- Plant Side Branch List Name + Plant Supply Side Connectors, !- Plant Side Connector List Name + Plant Demand Inlet Node, !- Demand Side Inlet Node Name + Plant Demand Outlet Node,!- Demand Side Outlet Node Name + Plant Demand Side Branches, !- Demand Side Branch List Name + Plant Demand Side Connectors, !- Demand Side Connector List Name + Sequential, !- Load Distribution Scheme + , !- Availability Manager List Name + DualSetpointDeadband; !- Plant Loop Demand Calculation Scheme + +!- =========== ALL OBJECTS IN CLASS: CONDENSER LOOP =========== +!***** CONDENSER Loop: TowerWaterSys ***** + + + CondenserLoop, + TowerWaterSys, !- Name + Water, !- Fluid Type + , !- User Defined Fluid Type + TowerWaterSys Loop Operation Scheme List, !- Condenser Equipment Operation Scheme Name + TowerWaterSys Supply Outlet Node, !- Condenser Loop Temperature Setpoint Node Name + 80.0, !- Maximum Loop Temperature {C} + 5.0, !- Minimum Loop Temperature {C} + AUTOSIZE, !- Maximum Loop Flow Rate {m3/s} + 0.0, !- Minimum Loop Flow Rate {m3/s} + AUTOSIZE, !- Condenser Loop Volume {m3} + TowerWaterSys Supply Inlet Node, !- Condenser Side Inlet Node Name + TowerWaterSys Supply Outlet Node, !- Condenser Side Outlet Node Name + TowerWaterSys Supply Branches, !- Condenser Side Branch List Name + TowerWaterSys Supply Connectors, !- Condenser Side Connector List Name + TowerWaterSys Demand Inlet Node, !- Demand Side Inlet Node Name + TowerWaterSys Demand Outlet Node, !- Demand Side Outlet Node Name + TowerWaterSys Demand Branches, !- Condenser Demand Side Branch List Name + TowerWaterSys Demand Connectors, !- Condenser Demand Side Connector List Name + SEQUENTIAL; !- Load Distribution Scheme + +!- =========== ALL OBJECTS IN CLASS: PLANT OPERATION SCHEMES =========== + + + PlantEquipmentOperationSchemes, + SHWSys1 Loop Operation Scheme List, !- Name + PlantEquipmentOperation:HeatingLoad, !- Control Scheme 1 Object Type + SHWSys1 Operation Scheme,!- Control Scheme 1 Name + PlantOnSched; !- Control Scheme 1 Schedule Name + + + + PlantEquipmentOperationSchemes, + HeatSys1 Loop Operation Scheme List, !- Name + PlantEquipmentOperation:HeatingLoad, !- Control Scheme 1 Object Type + HeatSys1 Operation Scheme, !- Control Scheme 1 Name + PlantOnSched; !- Control Scheme 1 Schedule Name + + + + PlantEquipmentOperationSchemes, + CoolSys1 Loop Operation Scheme List, !- Name + PlantEquipmentOperation:CoolingLoad, !- Control Scheme 1 Object Type + CoolSys1 Operation Scheme, !- Control Scheme 1 Name + PlantOnSched; !- Control Scheme 1 Schedule Name + + + + PlantEquipmentOperationSchemes, + Plant Loop Operation, !- Name + PlantEquipmentOperation:ComponentSetpoint, !- Control Scheme 1 Object Type + WSHPPlant Operation Scheme, !- Control Scheme 1 Name + Always_On; !- Control Scheme 1 Schedule Name + +!- =========== ALL OBJECTS IN CLASS: CONDENSER OPERATION SCHEMES =========== + + + CondenserEquipmentOperationSchemes, + TowerWaterSys Loop Operation Scheme List, !- Name + PlantEquipmentOperation:CoolingLoad, !- Control Scheme 1 Object Type + TowerWaterSys Operation Scheme, !- Control Scheme 1 Name + PlantOnSched; !- Control Scheme 1 Schedule Name + +!- =========== ALL OBJECTS IN CLASS: COOLING LOAD RANGE BASED OPERATION =========== + + + PlantEquipmentOperation:CoolingLoad, + CoolSys1 Operation Scheme, !- Name + 0.0, !- Load Range 1 Lower Limit {W} +1156291.305, !- Load Range 1 Upper Limit {W} + CoolSys1 Equipment List 1, !- Range 1 Equipment List Name +1156291.305, !- Load Range 2 Lower Limit {W} + 100000000000000, !- Load Range 2 Upper Limit {W} + CoolSys1 Equipment List 2; !- Range 2 Equipment List Name + + + + PlantEquipmentOperation:CoolingLoad, + TowerWaterSys Operation Scheme, !- Name + 0.0, !- Load Range 1 Lower Limit {W} +1156291.305, !- Load Range 1 Upper Limit {W} + TowerWaterSys Equipment List 1, !- Range 1 Equipment List Name +1156291.305, !- Load Range 2 Lower Limit {W} + 100000000000000, !- Load Range 2 Upper Limit {W} + TowerWaterSys Equipment List 2; !- Range 2 Equipment List Name + +!- =========== ALL OBJECTS IN CLASS: HEATING LOAD RANGE BASED OPERATION =========== + + + PlantEquipmentOperation:HeatingLoad, + SHWSys1 Operation Scheme,!- Name + 0.0, !- Load Range 1 Lower Limit {W} + 1000000000000000, !- Load Range 1 Upper Limit {W} + SHWSys1 Equipment List; !- Range 1 Equipment List Name + + + + PlantEquipmentOperation:HeatingLoad, + HeatSys1 Operation Scheme, !- Name + 0.0, !- Load Range 1 Lower Limit {W} + 1000000000000000, !- Load Range 1 Upper Limit {W} + HeatSys1 Equipment List; !- Range 1 Equipment List Name + +!- =========== ALL OBJECTS IN CLASS: PLANTEQUIPMENTOPERATION:COMPONENTSETPOINT =========== + + + PlantEquipmentOperation:ComponentSetpoint, + WSHPPlant Operation Scheme, !- Name + FluidCooler:TwoSpeed, !- Equipment 1 Object Type + Central Tower, !- Equipment 1 Name + Central Tower Inlet Node,!- Demand Calculation 1 Node Name + Plant Supply Outlet Node, !- Setpoint 1 Node Name + autosize, !- Component 1 Flow Rate {m3/s} + Cooling, !- Operation 1 Type + Boiler:HotWater, !- Equipment 2 Object Type + Dummy Boiler, !- Equipment 2 Name + Dummy Boiler Inlet Node, !- Demand Calculation 2 Node Name + Plant Supply Outlet Node,!- Setpoint 2 Node Name + autosize, !- Component 2 Flow Rate {m3/s} + Heating; !- Operation 2 Type + +!- =========== ALL OBJECTS IN CLASS: PLANT EQUIPMENT LIST =========== + + + PlantEquipmentList, + SHWSys1 Equipment List, !- Name + WaterHeater:Mixed, !- Equipment 1 Object Type + SHWSys1 Water Heater; !- Equipment 1 Name + + + + PlantEquipmentList, + HeatSys1 Equipment List, !- Name + Boiler:HotWater, !- Equipment 1 Object Type + HeatSys1 Boiler; !- Equipment 1 Name + + + + PlantEquipmentList, + CoolSys1 Equipment List 1, !- Name + Chiller:Electric:ReformulatedEIR, !- Equipment 1 Object Type + CoolSys1 Chiller1; !- Equipment 1 Name + + + + PlantEquipmentList, + CoolSys1 Equipment List 2, !- Name + Chiller:Electric:ReformulatedEIR, !- Equipment 1 Object Type + CoolSys1 Chiller1, !- Equipment 1 Name + Chiller:Electric:ReformulatedEIR, !- Equipment 2 Object Type + CoolSys1 Chiller2; !- Equipment 2 Name + +!- =========== ALL OBJECTS IN CLASS: CONDENSER EQUIPMENT LIST =========== + + + CondenserEquipmentList, + TowerWaterSys Equipment List 1, !- Name + CoolingTower:VariableSpeed, !- Equipment 1 Object Type + TowerWaterSys CoolTower 1; !- Equipment 1 Name + + + + CondenserEquipmentList, + TowerWaterSys Equipment List 2, !- Name + CoolingTower:VariableSpeed, !- Equipment 1 Object Type + TowerWaterSys CoolTower 1, !- Equipment 1 Name + CoolingTower:VariableSpeed, !- Equipment 2 Object Type + TowerWaterSys CoolTower 2; !- Equipment 2 Name + +!- =========== ALL OBJECTS IN CLASS: SPLITTER =========== + + + Connector:Splitter, + SHWSys1 Supply Splitter, !- Name + SHWSys1 Supply Inlet Branch, !- Inlet Branch Name + SHWSys1 Supply Equipment Branch, !- Outlet Branch 1 Name + SHWSys1 Supply Equipment Bypass Branch; !- Outlet Branch 2 Name + + + + Connector:Splitter, + SHWSys1 Demand Splitter, !- Name + SHWSys1 Demand Inlet Branch, !- Inlet Branch Name + SHWSys1 Demand Load Branch 1, !- Outlet Branch 1 Name + SHWSys1 Demand Load Branch 2, !- Outlet Branch 2 Name + SHWSys1 Demand Load Branch 3, !- Outlet Branch 3 Name + SHWSys1 Demand Bypass Branch; !- Outlet Branch 4 Name + + + + Connector:Splitter, + HeatSys1 Supply Splitter,!- Name + HeatSys1 Supply Inlet Branch, !- Inlet Branch Name + HeatSys1 Supply Equipment Branch, !- Outlet Branch 1 Name + HeatSys1 Supply Equipment Bypass Branch; !- Outlet Branch 2 Name + + + + + Connector:Splitter, + HeatSys1 Demand Splitter,!- Name + HeatSys1 Demand Inlet Branch, !- Inlet Branch Name + HeatSys1 Demand Load Branch 1, !- Outlet Branch 1 Name + HeatSys1 Demand Load Branch 2, !- Outlet Branch 2 Name + HeatSys1 Demand Load Branch 3, !- Outlet Branch 3 Name + HeatSys1 Demand Load Branch 4, !- Outlet Branch 4 Name + HeatSys1 Demand Load Branch 5, !- Outlet Branch 5 Name + HeatSys1 Demand Load Branch 6, !- Outlet Branch 6 Name + HeatSys1 Demand Load Branch 7, !- Outlet Branch 7 Name + HeatSys1 Demand Load Branch 8, !- Outlet Branch 8 Name + HeatSys1 Demand Load Branch 9, !- Outlet Branch 9 Name + HeatSys1 Demand Load Branch 10, !- Outlet Branch 10 Name + HeatSys1 Demand Load Branch 11, !- Outlet Branch 11 Name + HeatSys1 Demand Load Branch 12, !- Outlet Branch 12 Name + HeatSys1 Demand Load Branch 13, !- Outlet Branch 13 Name + HeatSys1 Demand Load Branch 14, !- Outlet Branch 14 Name + HeatSys1 Demand Load Branch 15, !- Outlet Branch 15 Name + HeatSys1 Demand Load Branch 17, !- Outlet Branch 16 Name + HeatSys1 Demand Load Branch 18, !- Outlet Branch 17 Name + HeatSys1 Demand Load Branch 19, !- Outlet Branch 18 Name + HeatSys1 Demand Load Branch 20, !- Outlet Branch 19 Name + HeatSys1 Demand Load Branch 21, !- Outlet Branch 20 Name + HeatSys1 Demand Bypass Branch; !- Outlet Branch 21 Name + + + + Connector:Splitter, + CoolSys1 Supply Splitter,!- Name + CoolSys1 Supply Inlet Branch, !- Inlet Branch Name + CoolSys1 Supply Equipment Branch 1, !- Outlet Branch 1 Name + CoolSys1 Supply Equipment Branch 2, !- Outlet Branch 2 Name + CoolSys1 Supply Equipment Bypass Branch; !- Outlet Branch 3 Name + + + + Connector:Splitter, + CoolSys1 Demand Splitter,!- Name + CoolSys1 Demand Inlet Branch, !- Inlet Branch Name + CoolSys1 Demand Load Branch 1, !- Outlet Branch 1 Name + CoolSys1 Demand Load Branch 2, !- Outlet Branch 2 Name + CoolSys1 Demand Load Branch 3, !- Outlet Branch 3 Name + CoolSys1 Demand Load Branch 4; !- Outlet Branch 4 Name + + + + + Connector:Splitter, + TowerWaterSys Supply Splitter, !- Name + TowerWaterSys Supply Inlet Branch, !- Inlet Branch Name + TowerWaterSys Supply Equipment Branch 1, !- Outlet Branch 1 Name + TowerWaterSys Supply Equipment Branch 2, !- Outlet Branch 2 Name + TowerWaterSys Supply Equipment Bypass Branch; !- Outlet Branch 3 Name + + + + Connector:Splitter, + TowerWaterSys Demand Splitter, !- Name + TowerWaterSys Demand Inlet Branch, !- Inlet Branch Name + TowerWaterSys Demand Load Branch 1, !- Outlet Branch 1 Name + TowerWaterSys Demand Load Branch 2, !- Outlet Branch 2 Name + TowerWaterSys Demand Bypass Branch; !- Outlet Branch 3 Name + +!- Data Center Connector Splitters + + + Connector:Splitter, + Plant Supply Splitter, !- Name + Plant Supply Inlet Branch, !- Inlet Branch Name + Plant Supply Tower Branch, !- Outlet Branch 1 Name + Dummy Boiler Branch, !- Outlet Branch 2 Name + Plant Supply Bypass Branch; !- Outlet Branch 3 Name + + + + Connector:Splitter, + Plant Demand Splitter, !- Name + Plant Demand Inlet Branch, !- Inlet Branch Name + WLHP Cooling Plant Branch AirLoop DataCenter Basement, !- Outlet Branch 1 Name + WLHP Heating Plant Branch AirLoop DataCenter Basement, !- Outlet Branch 2 Name + WLHP Cooling Plant Branch AirLoop DataCenter bot, !- Outlet Branch 3 Name + WLHP Heating Plant Branch AirLoop DataCenter bot, !- Outlet Branch 4 Name + WLHP Cooling Plant Branch AirLoop DataCenter mid, !- Outlet Branch 5 Name + WLHP Heating Plant Branch AirLoop DataCenter mid, !- Outlet Branch 6 Name + WLHP Cooling Plant Branch AirLoop DataCenter top, !- Outlet Branch 7 Name + WLHP Heating Plant Branch AirLoop DataCenter top, !- Outlet Branch 8 Name + Plant Demand Bypass Branch; !- Outlet Branch 9 Name + +!- =========== ALL OBJECTS IN CLASS: MIXER =========== + + + Connector:Mixer, + SHWSys1 Supply Mixer, !- Name + SHWSys1 Supply Outlet Branch, !- Outlet Branch Name + SHWSys1 Supply Equipment Branch, !- Inlet Branch 1 Name + SHWSys1 Supply Equipment Bypass Branch; !- Inlet Branch 2 Name + + + + Connector:Mixer, + SHWSys1 Demand Mixer, !- Name + SHWSys1 Demand Outlet Branch, !- Outlet Branch Name + SHWSys1 Demand Load Branch 1, !- Inlet Branch 1 Name + SHWSys1 Demand Load Branch 2, !- Inlet Branch 2 Name + SHWSys1 Demand Load Branch 3, !- Inlet Branch 3 Name + SHWSys1 Demand Bypass Branch; !- Inlet Branch 4 Name + + + + Connector:Mixer, + HeatSys1 Supply Mixer, !- Name + HeatSys1 Supply Outlet Branch, !- Outlet Branch Name + HeatSys1 Supply Equipment Branch, !- Inlet Branch 1 Name + HeatSys1 Supply Equipment Bypass Branch; !- Inlet Branch 2 Name + + + + + Connector:Mixer, + HeatSys1 Demand Mixer, !- Name + HeatSys1 Demand Outlet Branch, !- Outlet Branch Name + HeatSys1 Demand Load Branch 1, !- Inlet Branch 1 Name + HeatSys1 Demand Load Branch 2, !- Inlet Branch 2 Name + HeatSys1 Demand Load Branch 3, !- Inlet Branch 3 Name + HeatSys1 Demand Load Branch 4, !- Inlet Branch 4 Name + HeatSys1 Demand Load Branch 5, !- Inlet Branch 5 Name + HeatSys1 Demand Load Branch 6, !- Inlet Branch 6 Name + HeatSys1 Demand Load Branch 7, !- Inlet Branch 7 Name + HeatSys1 Demand Load Branch 8, !- Inlet Branch 8 Name + HeatSys1 Demand Load Branch 9, !- Inlet Branch 9 Name + HeatSys1 Demand Load Branch 10, !- Inlet Branch 10 Name + HeatSys1 Demand Load Branch 11, !- Inlet Branch 11 Name + HeatSys1 Demand Load Branch 12, !- Inlet Branch 12 Name + HeatSys1 Demand Load Branch 13, !- Inlet Branch 13 Name + HeatSys1 Demand Load Branch 14, !- Inlet Branch 14 Name + HeatSys1 Demand Load Branch 15, !- Inlet Branch 15 Name + HeatSys1 Demand Load Branch 17, !- Inlet Branch 16 Name + HeatSys1 Demand Load Branch 18, !- Inlet Branch 17 Name + HeatSys1 Demand Load Branch 19, !- Inlet Branch 18 Name + HeatSys1 Demand Load Branch 20, !- Inlet Branch 19 Name + HeatSys1 Demand Load Branch 21, !- Inlet Branch 20 Name + HeatSys1 Demand Bypass Branch; !- Inlet Branch 21 Name + + + + Connector:Mixer, + CoolSys1 Supply Mixer, !- Name + CoolSys1 Supply Outlet Branch, !- Outlet Branch Name + CoolSys1 Supply Equipment Branch 1, !- Inlet Branch 1 Name + CoolSys1 Supply Equipment Branch 2, !- Inlet Branch 2 Name + CoolSys1 Supply Equipment Bypass Branch; !- Inlet Branch 3 Name + + + + Connector:Mixer, + CoolSys1 Demand Mixer, !- Name + CoolSys1 Demand Outlet Branch, !- Outlet Branch Name + CoolSys1 Demand Load Branch 1, !- Inlet Branch 1 Name + CoolSys1 Demand Load Branch 2, !- Inlet Branch 2 Name + CoolSys1 Demand Load Branch 3, !- Inlet Branch 3 Name + CoolSys1 Demand Load Branch 4; !- Inlet Branch 4 Name + + + + Connector:Mixer, + TowerWaterSys Supply Mixer, !- Name + TowerWaterSys Supply Outlet Branch, !- Outlet Branch Name + TowerWaterSys Supply Equipment Branch 1, !- Inlet Branch 1 Name + TowerWaterSys Supply Equipment Branch 2, !- Inlet Branch 2 Name + TowerWaterSys Supply Equipment Bypass Branch; !- Inlet Branch 3 Name + + + + Connector:Mixer, + TowerWaterSys Demand Mixer, !- Name + TowerWaterSys Demand Outlet Branch, !- Outlet Branch Name + TowerWaterSys Demand Load Branch 1, !- Inlet Branch 1 Name + TowerWaterSys Demand Load Branch 2, !- Inlet Branch 2 Name + TowerWaterSys Demand Bypass Branch; !- Inlet Branch 3 Name + +!- Connector Mixer + + + Connector:Mixer, + Plant Supply Mixer, !- Name + Plant Supply Outlet Branch, !- Outlet Branch Name + Plant Supply Tower Branch, !- Inlet Branch 1 Name + Dummy Boiler Branch, !- Inlet Branch 2 Name + Plant Supply Bypass Branch; !- Inlet Branch 3 Name + + + + Connector:Mixer, + Plant Demand Mixer, !- Name + Plant Demand Outlet Branch, !- Outlet Branch Name + WLHP Cooling Plant Branch AirLoop DataCenter Basement, !- Inlet Branch 1 Name + WLHP Heating Plant Branch AirLoop DataCenter Basement, !- Inlet Branch 2 Name + WLHP Cooling Plant Branch AirLoop DataCenter bot, !- Inlet Branch 3 Name + WLHP Heating Plant Branch AirLoop DataCenter bot, !- Inlet Branch 4 Name + WLHP Cooling Plant Branch AirLoop DataCenter mid, !- Inlet Branch 5 Name + WLHP Heating Plant Branch AirLoop DataCenter mid, !- Inlet Branch 6 Name + WLHP Cooling Plant Branch AirLoop DataCenter top, !- Inlet Branch 7 Name + WLHP Heating Plant Branch AirLoop DataCenter top, !- Inlet Branch 8 Name + Plant Demand Bypass Branch; !- Inlet Branch 9 Name + +!- =========== ALL OBJECTS IN CLASS: AIR PRIMARY LOOP =========== +!***** Air Loop: VAV WITH REHEAT ***** + + + AirLoopHVAC, + CAV_bas, !- Name + CAV_bas_Controllers, !- Controller List Name + CAV_bas Availability Manager List, !- Availability Manager List Name + AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} + CAV_bas Air Loop Branches, !- Branch List Name + , !- Connector List Name + CAV_bas Supply Equipment Inlet Node, !- Supply Side Inlet Node Name + CAV_bas Zone Equipment Outlet Node, !- Demand Side Outlet Node Name + CAV_bas Zone Equipment Inlet Node, !- Demand Side Inlet Node Names + CAV_bas Supply Equipment Outlet Node; !- Supply Side Outlet Node Names + + + + AirLoopHVAC, + VAV_bot WITH REHEAT, !- Name + VAV_bot WITH REHEAT_Controllers, !- Controller List Name + VAV_bot WITH REHEAT Availability Manager List, !- Availability Manager List Name + AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} + VAV_bot WITH REHEAT Air Loop Branches, !- Branch List Name + , !- Connector List Name + VAV_bot WITH REHEAT Supply Equipment Inlet Node, !- Supply Side Inlet Node Name + VAV_bot WITH REHEAT Zone Equipment Outlet Node, !- Demand Side Outlet Node Name + VAV_bot WITH REHEAT Zone Equipment Inlet Node, !- Demand Side Inlet Node Names + VAV_bot WITH REHEAT Supply Equipment Outlet Node; !- Supply Side Outlet Node Names + + + + AirLoopHVAC, + VAV_mid WITH REHEAT, !- Name + VAV_mid WITH REHEAT_Controllers, !- Controller List Name + VAV_mid WITH REHEAT Availability Manager List, !- Availability Manager List Name + AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} + VAV_mid WITH REHEAT Air Loop Branches, !- Branch List Name + , !- Connector List Name + VAV_mid WITH REHEAT Supply Equipment Inlet Node, !- Supply Side Inlet Node Name + VAV_mid WITH REHEAT Zone Equipment Outlet Node, !- Demand Side Outlet Node Name + VAV_mid WITH REHEAT Zone Equipment Inlet Node, !- Demand Side Inlet Node Names + VAV_mid WITH REHEAT Supply Equipment Outlet Node; !- Supply Side Outlet Node Names + + + + AirLoopHVAC, + VAV_top WITH REHEAT, !- Name + VAV_top WITH REHEAT_Controllers, !- Controller List Name + VAV_top WITH REHEAT Availability Manager List, !- Availability Manager List Name + AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} + VAV_top WITH REHEAT Air Loop Branches, !- Branch List Name + , !- Connector List Name + VAV_top WITH REHEAT Supply Equipment Inlet Node, !- Supply Side Inlet Node Name + VAV_top WITH REHEAT Zone Equipment Outlet Node, !- Demand Side Outlet Node Name + VAV_top WITH REHEAT Zone Equipment Inlet Node, !- Demand Side Inlet Node Names + VAV_top WITH REHEAT Supply Equipment Outlet Node; !- Supply Side Outlet Node Names + +!- Data Center Air Primary Loop + + + AirLoopHVAC, + AirLoop DataCenter Basement, !- Name + DataCenter_bas_HeatC_Controllers, !- Controller List Name + AirLoop DataCenter Basement Availability Manager, !- Availability Manager List Name + autosize, !- Design Supply Air Flow Rate {m3/s} + AirLoop DataCenter Basement Branches, !- Branch List Name + , !- Connector List Name + AirLoop DataCenter Basement Return Air Inlet, !- Supply Side Inlet Node Name + ZoneMixer DataCenter Basement Return Air Outlet, !- Demand Side Outlet Node Name + ZoneSplitter DataCenter Basement Supply Air Inlet, !- Demand Side Inlet Node Names + AirLoop DataCenter Basement Supply Air Outlet; !- Supply Side Outlet Node Names + + + + AirLoopHVAC, + AirLoop DataCenter bot, !- Name + , !- Controller List Name + AirLoop DataCenter bot Availability Manager, !- Availability Manager List Name + autosize, !- Design Supply Air Flow Rate {m3/s} + AirLoop DataCenter bot Branches, !- Branch List Name + , !- Connector List Name + AirLoop DataCenter bot Return Air Inlet, !- Supply Side Inlet Node Name + ZoneMixer DataCenter bot Return Air Outlet, !- Demand Side Outlet Node Name + ZoneSplitter DataCenter bot Supply Air Inlet, !- Demand Side Inlet Node Names + AirLoop DataCenter bot Supply Air Outlet; !- Supply Side Outlet Node Names + + + + AirLoopHVAC, + AirLoop DataCenter mid, !- Name + , !- Controller List Name + AirLoop DataCenter mid Availability Manager, !- Availability Manager List Name + autosize, !- Design Supply Air Flow Rate {m3/s} + AirLoop DataCenter mid Branches, !- Branch List Name + , !- Connector List Name + AirLoop DataCenter mid Return Air Inlet, !- Supply Side Inlet Node Name + ZoneMixer DataCenter mid Return Air Outlet, !- Demand Side Outlet Node Name + ZoneSplitter DataCenter mid Supply Air Inlet, !- Demand Side Inlet Node Names + AirLoop DataCenter mid Supply Air Outlet; !- Supply Side Outlet Node Names + + + + AirLoopHVAC, + AirLoop DataCenter top, !- Name + , !- Controller List Name + AirLoop DataCenter top Availability Manager, !- Availability Manager List Name + autosize, !- Design Supply Air Flow Rate {m3/s} + AirLoop DataCenter top Branches, !- Branch List Name + , !- Connector List Name + AirLoop DataCenter top Return Air Inlet, !- Supply Side Inlet Node Name + ZoneMixer DataCenter top Return Air Outlet, !- Demand Side Outlet Node Name + ZoneSplitter DataCenter top Supply Air Inlet, !- Demand Side Inlet Node Names + AirLoop DataCenter top Supply Air Outlet; !- Supply Side Outlet Node Names + +!- =========== ALL OBJECTS IN CLASS: CONTROLLER LIST =========== + + AirLoopHVAC:ControllerList, + DataCenter_bas_HeatC_Controllers, !- Name + Controller:WaterCoil, !- Controller 1 Object Type + DataCenter_bas_HeatC_Controller; !- Controller 1 Name + + + AirLoopHVAC:ControllerList, + CAV_bas_Controllers, !- Name + Controller:WaterCoil, !- Controller 1 Object Type + CAV_bas_CoolC_Controller,!- Controller 1 Name + Controller:WaterCoil, !- Controller 2 Object Type + CAV_bas_HeatC_Controller;!- Controller 2 Name + + + + AirLoopHVAC:ControllerList, + VAV_bot WITH REHEAT_Controllers, !- Name + Controller:WaterCoil, !- Controller 1 Object Type + VAV_bot WITH REHEAT_CoolC_Controller, !- Controller 1 Name + Controller:WaterCoil, !- Controller 2 Object Type + VAV_bot WITH REHEAT_HeatC_Controller; !- Controller 2 Name + + + + AirLoopHVAC:ControllerList, + VAV_mid WITH REHEAT_Controllers, !- Name + Controller:WaterCoil, !- Controller 1 Object Type + VAV_mid WITH REHEAT_CoolC_Controller, !- Controller 1 Name + Controller:WaterCoil, !- Controller 2 Object Type + VAV_mid WITH REHEAT_HeatC_Controller; !- Controller 2 Name + + + + AirLoopHVAC:ControllerList, + VAV_top WITH REHEAT_Controllers, !- Name + Controller:WaterCoil, !- Controller 1 Object Type + VAV_top WITH REHEAT_CoolC_Controller, !- Controller 1 Name + Controller:WaterCoil, !- Controller 2 Object Type + VAV_top WITH REHEAT_HeatC_Controller; !- Controller 2 Name + + + + AirLoopHVAC:ControllerList, + CAV_bas_OA_Controllers, !- Name + Controller:OutdoorAir, !- Controller 1 Object Type + CAV_bas_OA_Controller; !- Controller 1 Name + + + + AirLoopHVAC:ControllerList, + VAV_bot WITH REHEAT_OA_Controllers, !- Name + Controller:OutdoorAir, !- Controller 1 Object Type + VAV_bot WITH REHEAT_OA_Controller; !- Controller 1 Name + + + + AirLoopHVAC:ControllerList, + VAV_mid WITH REHEAT_OA_Controllers, !- Name + Controller:OutdoorAir, !- Controller 1 Object Type + VAV_mid WITH REHEAT_OA_Controller; !- Controller 1 Name + + + + AirLoopHVAC:ControllerList, + VAV_top WITH REHEAT_OA_Controllers, !- Name + Controller:OutdoorAir, !- Controller 1 Object Type + VAV_top WITH REHEAT_OA_Controller; !- Controller 1 Name + +!- Data Center Air Loop HVAC Controller List + + + AirLoopHVAC:ControllerList, + AirLoop DataCenter Basement OA System Controllers, !- Name + Controller:OutdoorAir, !- Controller 1 Object Type + AirLoop DataCenter Basement OA Controller; !- Controller 1 Name + + + + AirLoopHVAC:ControllerList, + AirLoop DataCenter bot OA System Controllers, !- Name + Controller:OutdoorAir, !- Controller 1 Object Type + AirLoop DataCenter bot OA Controller; !- Controller 1 Name + + + + AirLoopHVAC:ControllerList, + AirLoop DataCenter mid OA System Controllers, !- Name + Controller:OutdoorAir, !- Controller 1 Object Type + AirLoop DataCenter mid OA Controller; !- Controller 1 Name + + + + AirLoopHVAC:ControllerList, + AirLoop DataCenter top OA System Controllers, !- Name + Controller:OutdoorAir, !- Controller 1 Object Type + AirLoop DataCenter top OA Controller; !- Controller 1 Name + +!- =========== ALL OBJECTS IN CLASS: AIR LOOP EQUIPMENT LIST =========== + + + + + + +AirLoopHVAC:OutdoorAirSystem:EquipmentList, + CAV_bas_OA_Equipment, !- Name + OutdoorAir:Mixer, !- Component 1 Object Type + CAV_bas_OAMixing Box; !- Component 1 Name + + + + + + + + + + + + +AirLoopHVAC:OutdoorAirSystem:EquipmentList, + VAV_bot WITH REHEAT_OA_Equipment, !- Name + HeatExchanger:AirToAir:SensibleAndLatent, !- Component 1 Object Type + VAV_bot WITH REHEAT OA Heat Recovery, !- Component 1 Name + OutdoorAir:Mixer, !- Component 2 Object Type + VAV_bot WITH REHEAT_OAMixing Box; !- Component 2 Name + + + + + + + + + + +AirLoopHVAC:OutdoorAirSystem:EquipmentList, + VAV_mid WITH REHEAT_OA_Equipment, !- Name + HeatExchanger:AirToAir:SensibleAndLatent, !- Component 1 Object Type + VAV_mid WITH REHEAT OA Heat Recovery, !- Component 1 Name + OutdoorAir:Mixer, !- Component 2 Object Type + VAV_mid WITH REHEAT_OAMixing Box; !- Component 2 Name + + + + + + + + + + +AirLoopHVAC:OutdoorAirSystem:EquipmentList, + VAV_top WITH REHEAT_OA_Equipment, !- Name + HeatExchanger:AirToAir:SensibleAndLatent, !- Component 1 Object Type + VAV_top WITH REHEAT OA Heat Recovery, !- Component 1 Name + OutdoorAir:Mixer, !- Component 2 Object Type + VAV_top WITH REHEAT_OAMixing Box; !- Component 2 Name + + + + + + +!- Data Center OA System Equipment List + + + AirLoopHVAC:OutdoorAirSystem:EquipmentList, + AirLoop DataCenter Basement OA System Equipment, !- Name + OutdoorAir:Mixer, !- Component 1 Object Type + DataCenter Basement OA Mixing Box; !- Component 1 Name + + + + AirLoopHVAC:OutdoorAirSystem:EquipmentList, + AirLoop DataCenter bot OA System Equipment, !- Name + OutdoorAir:Mixer, !- Component 1 Object Type + DataCenter bot OA Mixing Box; !- Component 1 Name + + + + AirLoopHVAC:OutdoorAirSystem:EquipmentList, + AirLoop DataCenter mid OA System Equipment, !- Name + OutdoorAir:Mixer, !- Component 1 Object Type + DataCenter mid OA Mixing Box; !- Component 1 Name + + + + AirLoopHVAC:OutdoorAirSystem:EquipmentList, + AirLoop DataCenter top OA System Equipment, !- Name + OutdoorAir:Mixer, !- Component 1 Object Type + DataCenter top OA Mixing Box; !- Component 1 Name + +!- =========== ALL OBJECTS IN CLASS: OUTSIDE AIR SYSTEM =========== + + + AirLoopHVAC:OutdoorAirSystem, + CAV_bas_OA, !- Name + CAV_bas_OA_Controllers, !- Controller List Name + CAV_bas_OA_Equipment, !- Outdoor Air Equipment List Name + CAV_bas Availability Manager List; !- Availability Manager List Name + + + + AirLoopHVAC:OutdoorAirSystem, + VAV_bot WITH REHEAT_OA, !- Name + VAV_bot WITH REHEAT_OA_Controllers, !- Controller List Name + VAV_bot WITH REHEAT_OA_Equipment, !- Outdoor Air Equipment List Name + VAV_bot WITH REHEAT Availability Manager List; !- Availability Manager List Name + + + + AirLoopHVAC:OutdoorAirSystem, + VAV_mid WITH REHEAT_OA, !- Name + VAV_mid WITH REHEAT_OA_Controllers, !- Controller List Name + VAV_mid WITH REHEAT_OA_Equipment, !- Outdoor Air Equipment List Name + VAV_mid WITH REHEAT Availability Manager List; !- Availability Manager List Name + + + + AirLoopHVAC:OutdoorAirSystem, + VAV_top WITH REHEAT_OA, !- Name + VAV_top WITH REHEAT_OA_Controllers, !- Controller List Name + VAV_top WITH REHEAT_OA_Equipment, !- Outdoor Air Equipment List Name + VAV_top WITH REHEAT Availability Manager List; !- Availability Manager List Name + +!- Data Cneter OA System + + + AirLoopHVAC:OutdoorAirSystem, + AirLoop DataCenter Basement OA System, !- Name + AirLoop DataCenter Basement OA System Controllers, !- Controller List Name + AirLoop DataCenter Basement OA System Equipment, !- Outdoor Air Equipment List Name + AirLoop DataCenter Basement Availability Manager; !- Availability Manager List Name + + + + AirLoopHVAC:OutdoorAirSystem, + AirLoop DataCenter bot OA System, !- Name + AirLoop DataCenter bot OA System Controllers, !- Controller List Name + AirLoop DataCenter bot OA System Equipment, !- Outdoor Air Equipment List Name + AirLoop DataCenter bot Availability Manager; !- Availability Manager List Name + + + + AirLoopHVAC:OutdoorAirSystem, + AirLoop DataCenter mid OA System, !- Name + AirLoop DataCenter mid OA System Controllers, !- Controller List Name + AirLoop DataCenter mid OA System Equipment, !- Outdoor Air Equipment List Name + AirLoop DataCenter mid Availability Manager; !- Availability Manager List Name + + + + AirLoopHVAC:OutdoorAirSystem, + AirLoop DataCenter top OA System, !- Name + AirLoop DataCenter top OA System Controllers, !- Controller List Name + AirLoop DataCenter top OA System Equipment, !- Outdoor Air Equipment List Name + AirLoop DataCenter top Availability Manager; !- Availability Manager List Name + +!- =========== ALL OBJECTS IN CLASS: OUTSIDE AIR INLET NODE LIST =========== + + + OutdoorAir:NodeList, + CAV_bas_OANode List; !- Node or NodeList Name 1 + + + + OutdoorAir:NodeList, + VAV_bot WITH REHEAT_OANode List; !- Node or NodeList Name 1 + + + + OutdoorAir:NodeList, + VAV_mid WITH REHEAT_OANode List; !- Node or NodeList Name 1 + + + + OutdoorAir:NodeList, + VAV_top WITH REHEAT_OANode List; !- Node or NodeList Name 1 + +!- Data Center OA Nodes + + + OutdoorAir:Node, + DataCenter Basement Outside Air Inlet; !- Name + + + + OutdoorAir:Node, + DataCenter bot Outside Air Inlet; !- Name + + + + OutdoorAir:Node, + DataCenter mid Outside Air Inlet; !- Name + + + + OutdoorAir:Node, + DataCenter top Outside Air Inlet; !- Name + + + + OutdoorAir:Node, + Common OSA Inlet Node, !- Name + -1; !- Height Above Ground {m} + +!- =========== ALL OBJECTS IN CLASS: OUTSIDE AIR MIXER =========== + + + OutdoorAir:Mixer, + CAV_bas_OAMixing Box, !- Name + CAV_bas_OA-CAV_CoolCNode, !- Mixed Air Node Name + CAV_bas_OAInlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name + CAV_bas_OARelief Node, !- Relief Air Stream Node Name + CAV_bas Supply Equipment Inlet Node; !- Return Air Stream Node Name + + + + OutdoorAir:Mixer, + VAV_bot WITH REHEAT_OAMixing Box, !- Name + VAV_bot WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Mixed Air Node Name + VAV_bot WITH REHEAT Heat Recovery Outlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name + VAV_bot WITH REHEAT_OARelief Node, !- Relief Air Stream Node Name + VAV_bot WITH REHEAT Supply Equipment Inlet Node; !- Return Air Stream Node Name + + + + OutdoorAir:Mixer, + VAV_mid WITH REHEAT_OAMixing Box, !- Name + VAV_mid WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Mixed Air Node Name + VAV_mid WITH REHEAT Heat Recovery Outlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name + VAV_mid WITH REHEAT_OARelief Node, !- Relief Air Stream Node Name + VAV_mid WITH REHEAT Supply Equipment Inlet Node; !- Return Air Stream Node Name + + + + OutdoorAir:Mixer, + VAV_top WITH REHEAT_OAMixing Box, !- Name + VAV_top WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Mixed Air Node Name + VAV_top WITH REHEAT Heat Recovery Outlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name + VAV_top WITH REHEAT_OARelief Node, !- Relief Air Stream Node Name + VAV_top WITH REHEAT Supply Equipment Inlet Node; !- Return Air Stream Node Name + +!- Data Center OA:Mixer + + + OutdoorAir:Mixer, + DataCenter Basement OA Mixing Box, !- Name + DataCenter Basement Mixed Air Outlet, !- Mixed Air Node Name + DataCenter Basement Outside Air Inlet, !- Outdoor Air Stream Node Name + DataCenter Basement Relief Air Outlet, !- Relief Air Stream Node Name + AirLoop DataCenter Basement Return Air Inlet; !- Return Air Stream Node Name + + + + OutdoorAir:Mixer, + DataCenter bot OA Mixing Box, !- Name + DataCenter bot Mixed Air Outlet, !- Mixed Air Node Name + DataCenter bot Outside Air Inlet, !- Outdoor Air Stream Node Name + DataCenter bot Relief Air Outlet, !- Relief Air Stream Node Name + AirLoop DataCenter bot Return Air Inlet; !- Return Air Stream Node Name + + + + OutdoorAir:Mixer, + DataCenter mid OA Mixing Box, !- Name + DataCenter mid Mixed Air Outlet, !- Mixed Air Node Name + DataCenter mid Outside Air Inlet, !- Outdoor Air Stream Node Name + DataCenter mid Relief Air Outlet, !- Relief Air Stream Node Name + AirLoop DataCenter mid Return Air Inlet; !- Return Air Stream Node Name + + + + OutdoorAir:Mixer, + DataCenter top OA Mixing Box, !- Name + DataCenter top Mixed Air Outlet, !- Mixed Air Node Name + DataCenter top Outside Air Inlet, !- Outdoor Air Stream Node Name + DataCenter top Relief Air Outlet, !- Relief Air Stream Node Name + AirLoop DataCenter top Return Air Inlet; !- Return Air Stream Node Name + +!- =========== ALL OBJECTS IN CLASS: AVAILABILITYMANAGER:SCHEDULED =========== + + + AvailabilityManager:Scheduled, + AirLoop DataCenter Basement Availability, !- Name + Always_On; !- Schedule Name + + + + AvailabilityManager:Scheduled, + AirLoop DataCenter bot Availability, !- Name + Always_On; !- Schedule Name + + + + AvailabilityManager:Scheduled, + AirLoop DataCenter mid Availability, !- Name + Always_On; !- Schedule Name + + + + AvailabilityManager:Scheduled, + AirLoop DataCenter top Availability, !- Name + Always_On; !- Schedule Name + +!- =========== ALL OBJECTS IN CLASS: SYSTEM AVAILABILITY MANAGER LIST =========== + + + AvailabilityManagerAssignmentList, + CAV_bas Availability Manager List, !- Name + AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type + CAV_bas Availability Manager; !- Availability Manager 1 Name + + + + AvailabilityManagerAssignmentList, + VAV_bot WITH REHEAT Availability Manager List, !- Name + AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type + VAV_bot WITH REHEAT Availability Manager; !- Availability Manager 1 Name + + + + AvailabilityManagerAssignmentList, + VAV_mid WITH REHEAT Availability Manager List, !- Name + AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type + VAV_mid WITH REHEAT Availability Manager; !- Availability Manager 1 Name + + + + AvailabilityManagerAssignmentList, + VAV_top WITH REHEAT Availability Manager List, !- Name + AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type + VAV_top WITH REHEAT Availability Manager; !- Availability Manager 1 Name + + + + AvailabilityManagerAssignmentList, + AirLoop DataCenter Basement Availability Manager, !- Name + AvailabilityManager:Scheduled, !- Availability Manager 1 Object Type + AirLoop DataCenter Basement Availability; !- Availability Manager 1 Name + + + + AvailabilityManagerAssignmentList, + AirLoop DataCenter bot Availability Manager, !- Name + AvailabilityManager:Scheduled, !- Availability Manager 1 Object Type + AirLoop DataCenter bot Availability; !- Availability Manager 1 Name + + + + AvailabilityManagerAssignmentList, + AirLoop DataCenter mid Availability Manager, !- Name + AvailabilityManager:Scheduled, !- Availability Manager 1 Object Type + AirLoop DataCenter mid Availability; !- Availability Manager 1 Name + + + + AvailabilityManagerAssignmentList, + AirLoop DataCenter top Availability Manager, !- Name + AvailabilityManager:Scheduled, !- Availability Manager 1 Object Type + AirLoop DataCenter top Availability; !- Availability Manager 1 Name + +!- =========== ALL OBJECTS IN CLASS: SYSTEM AVAILABILITY MANAGER:NIGHT CYCLE =========== + + + AvailabilityManager:NightCycle, + CAV_bas Availability Manager, !- Name + Always_On, !- Applicability Schedule Name + HVACOperationSchd, !- Fan Schedule Name + CycleOnAny, !- Control Type + 1.0, !- Thermostat Tolerance {deltaC} + 1800; !- Cycling Run Time {s} + + + + AvailabilityManager:NightCycle, + VAV_bot WITH REHEAT Availability Manager, !- Name + Always_On, !- Applicability Schedule Name + HVACOperationSchd, !- Fan Schedule Name + CycleOnAny, !- Control Type + 1.0, !- Thermostat Tolerance {deltaC} + 1800; !- Cycling Run Time {s} + + + + AvailabilityManager:NightCycle, + VAV_mid WITH REHEAT Availability Manager, !- Name + Always_On, !- Applicability Schedule Name + HVACOperationSchd, !- Fan Schedule Name + CycleOnAny, !- Control Type + 1.0, !- Thermostat Tolerance {deltaC} + 1800; !- Cycling Run Time {s} + + + + AvailabilityManager:NightCycle, + VAV_top WITH REHEAT Availability Manager, !- Name + Always_On, !- Applicability Schedule Name + HVACOperationSchd, !- Fan Schedule Name + CycleOnAny, !- Control Type + 1.0, !- Thermostat Tolerance {deltaC} + 1800; !- Cycling Run Time {s} + +!- =========== ALL OBJECTS IN CLASS: SETPOINTMANAGER:SINGLEZONE:REHEAT =========== + + + SetpointManager:SingleZone:Reheat, + CAV_bas SupAirTemp Manager, !- Name + Temperature, !- Control Variable + 10.0, !- Minimum Supply Air Temperature {C} + 50.0, !- Maximum Supply Air Temperature {C} + Basement, !- Control Zone Name + Basement Air Node, !- Zone Node Name + Basement Direct Air Inlet Node Name, !- Zone Inlet Node Name + CAV_bas Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name + + + + SetpointManager:SingleZone:Reheat, + DataCenter Basement SupAirTemp Manager, !- Name + Temperature, !- Control Variable + 10.0, !- Minimum Supply Air Temperature {C} + 50.0, !- Maximum Supply Air Temperature {C} + DataCenter_basement_ZN_6,!- Control Zone Name + DataCenter Basement Zone Air Node, !- Zone Node Name + DataCenter Basement Supply Inlet, !- Zone Inlet Node Name + AirLoop DataCenter Basement Supply Air Outlet; !- Setpoint Node or NodeList Name + + + + SetpointManager:SingleZone:Reheat, + DataCenter_bot_ZN_6 SupAirTemp Manager, !- Name + Temperature, !- Control Variable + 10.0, !- Minimum Supply Air Temperature {C} + 50.0, !- Maximum Supply Air Temperature {C} + DataCenter_bot_ZN_6, !- Control Zone Name + DataCenter bot Zone Air Node, !- Zone Node Name + DataCenter bot Supply Inlet, !- Zone Inlet Node Name + AirLoop DataCenter bot Supply Air Outlet; !- Setpoint Node or NodeList Name + + + + SetpointManager:SingleZone:Reheat, + DataCenter_mid_ZN_6 SupAirTemp Manager, !- Name + Temperature, !- Control Variable + 10.0, !- Minimum Supply Air Temperature {C} + 50.0, !- Maximum Supply Air Temperature {C} + DataCenter_mid_ZN_6, !- Control Zone Name + DataCenter mid Zone Air Node, !- Zone Node Name + DataCenter mid Supply Inlet, !- Zone Inlet Node Name + AirLoop DataCenter mid Supply Air Outlet; !- Setpoint Node or NodeList Name + + + + SetpointManager:SingleZone:Reheat, + DataCenter_top_ZN_6 SupAirTemp Manager, !- Name + Temperature, !- Control Variable + 10.0, !- Minimum Supply Air Temperature {C} + 50.0, !- Maximum Supply Air Temperature {C} + DataCenter_top_ZN_6, !- Control Zone Name + DataCenter top Zone Air Node, !- Zone Node Name + DataCenter top Supply Inlet, !- Zone Inlet Node Name + AirLoop DataCenter top Supply Air Outlet; !- Setpoint Node or NodeList Name + +!- =========== ALL OBJECTS IN CLASS: SET POINT MANAGER:WARMEST =========== + + + + + + + +SetpointManager:OutdoorAirReset, + VAV_bot Supply Air Temperature Manager, !- Name + Temperature, !- Control Variable + 15.6, !- Setpoint at Outdoor Low Temperature {C} + 10, !- Outdoor Low Temperature {C} + 12.8, !- Setpoint at Outdoor High Temperature {C} + 21.1, !- Outdoor High Temperature {C} + VAV_bot WITH REHEAT Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name + + + + + + + + + + + + + +SetpointManager:OutdoorAirReset, + VAV_mid Supply Air Temperature Manager, !- Name + Temperature, !- Control Variable + 15.6, !- Setpoint at Outdoor Low Temperature {C} + 10, !- Outdoor Low Temperature {C} + 12.8, !- Setpoint at Outdoor High Temperature {C} + 21.1, !- Outdoor High Temperature {C} + VAV_mid WITH REHEAT Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name + + + + + + + + + + + + + +SetpointManager:OutdoorAirReset, + VAV_top Supply Air Temperature Manager, !- Name + Temperature, !- Control Variable + 15.6, !- Setpoint at Outdoor Low Temperature {C} + 10, !- Outdoor Low Temperature {C} + 12.8, !- Setpoint at Outdoor High Temperature {C} + 21.1, !- Outdoor High Temperature {C} + VAV_top WITH REHEAT Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name + + + + + + + + + + SetpointManager:Scheduled, + SHWSys1 Loop Setpoint Manager, !- Name + Temperature, !- Control Variable + SHWSys1-Loop-Temp-Schedule, !- Schedule Name + SHWSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name + + + + SetpointManager:Scheduled, + HeatSys1 Loop Setpoint Manager, !- Name + Temperature, !- Control Variable + HW-Loop-Temp-Schedule, !- Schedule Name + HeatSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name + + + + + + + SetpointManager:Scheduled, + CoolSys1 Loop Setpoint Manager, !- Name + Temperature, !- Control Variable + CW-Loop-Temp-Schedule, !- Schedule Name + CoolSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name + + + + + + SetpointManager:Scheduled, + TowerWaterSystem Loop Setpoint Manager, !- Name + Temperature, !- Control Variable + Tower-Loop-Temp-Schedule,!- Schedule Name + TowerWaterSys Supply Outlet Node; !- Setpoint Node or NodeList Name + + + + SetpointManager:Scheduled, + CoolSys1 Loop Plant Demand Inlet Setpoint Manager, !- Name + Temperature, !- Control Variable + CW-Loop-Temp-Schedule, !- Schedule Name + CoolSys1 Demand Inlet Node; !- Setpoint Node or NodeList Name + + +!- =========== ALL OBJECTS IN CLASS: SETPOINTMANAGER:SCHEDULED:DUALSETPOINT =========== + + + SetpointManager:Scheduled:DualSetpoint, + Water Loop Setpoint Manager, !- Name + Temperature, !- Control Variable + PLANT LOOP HIGH TEMP SCHEDULE, !- High Setpoint Schedule Name + PLANT LOOP LOW TEMP SCHEDULE, !- Low Setpoint Schedule Name + Plant Supply Outlet Node;!- Setpoint Node or NodeList Name + +!- =========== ALL OBJECTS IN CLASS: SETPOINTMANAGER:SINGLEZONE:HUMIDITY:MINIMUM =========== + + + SetpointManager:SingleZone:Humidity:Minimum, + DataCenter_Basement Humidifier HUMRAT setpoint, !- Name + , !- Control Variable + , !- Schedule Name + DataCenter_Humidifier-DataCenter_ExtraElecHeatCNode, !- Setpoint Node or NodeList Name + DataCenter Basement Zone Air Node; !- Control Zone Air Node Name + +!- =========== ALL OBJECTS IN CLASS: SETPOINTMANAGER:MIXEDAIR =========== + + + SetpointManager:MixedAir, + DataCenter_ExtraElecHeatC Air Temp Manager, !- Name + Temperature, !- Control Variable + AirLoop DataCenter Basement Supply Air Outlet, !- Reference Setpoint Node Name + DataCenter Basement Mixed Air Outlet, !- Fan Inlet Node Name + AirLoop DataCenter Basement Supply Fan Outlet, !- Fan Outlet Node Name + DataCenter_ExtraElecHeatC-DataCenter_ExtraWaterHeatCNode; !- Setpoint Node or NodeList Name + +!- =========== ALL OBJECTS IN CLASS: SET POINT MANAGER:MIXED AIR =========== + + + SetpointManager:MixedAir, + CAV_bas_CoolC SAT Manager, !- Name + Temperature, !- Control Variable + CAV_bas Supply Equipment Outlet Node, !- Reference Setpoint Node Name + CAV_bas_HeatC-CAV_FanNode, !- Fan Inlet Node Name + CAV_bas Supply Equipment Outlet Node, !- Fan Outlet Node Name + CAV_bas_CoolC-CAV_HeatCNode; !- Setpoint Node or NodeList Name + + + + SetpointManager:MixedAir, + CAV_bas_HeatC SAT Manager, !- Name + Temperature, !- Control Variable + CAV_bas Supply Equipment Outlet Node, !- Reference Setpoint Node Name + CAV_bas_HeatC-CAV_FanNode, !- Fan Inlet Node Name + CAV_bas Supply Equipment Outlet Node, !- Fan Outlet Node Name + CAV_bas_HeatC-CAV_FanNode; !- Setpoint Node or NodeList Name + + + + SetpointManager:MixedAir, + CAV_bas_OAMixed Air Temp Manager, !- Name + Temperature, !- Control Variable + CAV_bas Supply Equipment Outlet Node, !- Reference Setpoint Node Name + CAV_bas_HeatC-CAV_FanNode, !- Fan Inlet Node Name + CAV_bas Supply Equipment Outlet Node, !- Fan Outlet Node Name + CAV_bas_OA-CAV_CoolCNode;!- Setpoint Node or NodeList Name + + + + SetpointManager:MixedAir, + VAV_bot WITH REHEAT_CoolC SAT Manager, !- Name + Temperature, !- Control Variable + VAV_bot WITH REHEAT Supply Equipment Outlet Node, !- Reference Setpoint Node Name + VAV_bot WITH REHEAT_HeatC-VAV WITH REHEAT FanNode, !- Fan Inlet Node Name + VAV_bot WITH REHEAT Supply Equipment Outlet Node, !- Fan Outlet Node Name + VAV_bot WITH REHEAT_CoolC-VAV WITH REHEAT_HeatCNode; !- Setpoint Node or NodeList Name + + + + SetpointManager:MixedAir, + VAV_bot WITH REHEAT_HeatC SAT Manager, !- Name + Temperature, !- Control Variable + VAV_bot WITH REHEAT Supply Equipment Outlet Node, !- Reference Setpoint Node Name + VAV_bot WITH REHEAT_HeatC-VAV WITH REHEAT FanNode, !- Fan Inlet Node Name + VAV_bot WITH REHEAT Supply Equipment Outlet Node, !- Fan Outlet Node Name + VAV_bot WITH REHEAT_HeatC-VAV WITH REHEAT FanNode; !- Setpoint Node or NodeList Name + + + + SetpointManager:MixedAir, + VAV_bot WITH REHEAT_OAMixed Air Temp Manager, !- Name + Temperature, !- Control Variable + VAV_bot WITH REHEAT Supply Equipment Outlet Node, !- Reference Setpoint Node Name + VAV_bot WITH REHEAT_HeatC-VAV WITH REHEAT FanNode, !- Fan Inlet Node Name + VAV_bot WITH REHEAT Supply Equipment Outlet Node, !- Fan Outlet Node Name + VAV_bot WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode; !- Setpoint Node or NodeList Name + + + + SetpointManager:MixedAir, + VAV_mid WITH REHEAT_CoolC SAT Manager, !- Name + Temperature, !- Control Variable + VAV_mid WITH REHEAT Supply Equipment Outlet Node, !- Reference Setpoint Node Name + VAV_mid WITH REHEAT_HeatC-VAV WITH REHEAT FanNode, !- Fan Inlet Node Name + VAV_mid WITH REHEAT Supply Equipment Outlet Node, !- Fan Outlet Node Name + VAV_mid WITH REHEAT_CoolC-VAV WITH REHEAT_HeatCNode; !- Setpoint Node or NodeList Name + + + + SetpointManager:MixedAir, + VAV_mid WITH REHEAT_HeatC SAT Manager, !- Name + Temperature, !- Control Variable + VAV_mid WITH REHEAT Supply Equipment Outlet Node, !- Reference Setpoint Node Name + VAV_mid WITH REHEAT_HeatC-VAV WITH REHEAT FanNode, !- Fan Inlet Node Name + VAV_mid WITH REHEAT Supply Equipment Outlet Node, !- Fan Outlet Node Name + VAV_mid WITH REHEAT_HeatC-VAV WITH REHEAT FanNode; !- Setpoint Node or NodeList Name + + + + SetpointManager:MixedAir, + VAV_mid WITH REHEAT_OAMixed Air Temp Manager, !- Name + Temperature, !- Control Variable + VAV_mid WITH REHEAT Supply Equipment Outlet Node, !- Reference Setpoint Node Name + VAV_mid WITH REHEAT_HeatC-VAV WITH REHEAT FanNode, !- Fan Inlet Node Name + VAV_mid WITH REHEAT Supply Equipment Outlet Node, !- Fan Outlet Node Name + VAV_mid WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode; !- Setpoint Node or NodeList Name + + + + SetpointManager:MixedAir, + VAV_top WITH REHEAT_CoolC SAT Manager, !- Name + Temperature, !- Control Variable + VAV_top WITH REHEAT Supply Equipment Outlet Node, !- Reference Setpoint Node Name + VAV_top WITH REHEAT_HeatC-VAV WITH REHEAT FanNode, !- Fan Inlet Node Name + VAV_top WITH REHEAT Supply Equipment Outlet Node, !- Fan Outlet Node Name + VAV_top WITH REHEAT_CoolC-VAV WITH REHEAT_HeatCNode; !- Setpoint Node or NodeList Name + + + + SetpointManager:MixedAir, + VAV_top WITH REHEAT_HeatC SAT Manager, !- Name + Temperature, !- Control Variable + VAV_top WITH REHEAT Supply Equipment Outlet Node, !- Reference Setpoint Node Name + VAV_top WITH REHEAT_HeatC-VAV WITH REHEAT FanNode, !- Fan Inlet Node Name + VAV_top WITH REHEAT Supply Equipment Outlet Node, !- Fan Outlet Node Name + VAV_top WITH REHEAT_HeatC-VAV WITH REHEAT FanNode; !- Setpoint Node or NodeList Name + + + + SetpointManager:MixedAir, + VAV_top WITH REHEAT_OAMixed Air Temp Manager, !- Name + Temperature, !- Control Variable + VAV_top WITH REHEAT Supply Equipment Outlet Node, !- Reference Setpoint Node Name + VAV_top WITH REHEAT_HeatC-VAV WITH REHEAT FanNode, !- Fan Inlet Node Name + VAV_top WITH REHEAT Supply Equipment Outlet Node, !- Fan Outlet Node Name + VAV_top WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode; !- Setpoint Node or NodeList Name + + + + SetpointManager:MixedAir, + DataCenter Basement OAMixed Air Temp Manager, !- Name + Temperature, !- Control Variable + AirLoop DataCenter Basement Supply Air Outlet, !- Reference Setpoint Node Name + DataCenter Basement Mixed Air Outlet, !- Fan Inlet Node Name + AirLoop DataCenter Basement Supply Fan Outlet, !- Fan Outlet Node Name + DataCenter Basement Mixed Air Outlet; !- Setpoint Node or NodeList Name + + + + SetpointManager:MixedAir, + DataCenter bot OAMixed Air Temp Manager, !- Name + Temperature, !- Control Variable + AirLoop DataCenter bot Supply Air Outlet, !- Reference Setpoint Node Name + DataCenter bot Mixed Air Outlet, !- Fan Inlet Node Name + AirLoop DataCenter bot Supply Fan Outlet, !- Fan Outlet Node Name + DataCenter bot Mixed Air Outlet; !- Setpoint Node or NodeList Name + + + + SetpointManager:MixedAir, + DataCenter mid OAMixed Air Temp Manager, !- Name + Temperature, !- Control Variable + AirLoop DataCenter mid Supply Air Outlet, !- Reference Setpoint Node Name + DataCenter mid Mixed Air Outlet, !- Fan Inlet Node Name + AirLoop DataCenter mid Supply Fan Outlet, !- Fan Outlet Node Name + DataCenter mid Mixed Air Outlet; !- Setpoint Node or NodeList Name + + + + SetpointManager:MixedAir, + DataCenter top OAMixed Air Temp Manager, !- Name + Temperature, !- Control Variable + AirLoop DataCenter top Supply Air Outlet, !- Reference Setpoint Node Name + DataCenter top Mixed Air Outlet, !- Fan Inlet Node Name + AirLoop DataCenter top Supply Fan Outlet, !- Fan Outlet Node Name + DataCenter top Mixed Air Outlet; !- Setpoint Node or NodeList Name + + + + + + + +SetpointManager:OutdoorAirPretreat, + VAV_bot WITH REHEAT Heat Exhchanger Supply Air Temp Manager, !- Name + Temperature, !- Control Variable + -99, !- Minimum Setpoint Temperature {C} + 99, !- Maximum Setpoint Temperature {C} + 0.00001, !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir} + 1.0, !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir} + VAV_bot WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Reference Setpoint Node Name + VAV_bot WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Mixed Air Stream Node Name + VAV_bot WITH REHEAT_OAInlet Node, !- Outdoor Air Stream Node Name + VAV_bot WITH REHEAT Supply Equipment Inlet Node, !- Return Air Stream Node Name + VAV_bot WITH REHEAT Heat Recovery Outlet Node; !- Setpoint Node or NodeList Name + + + + + + + + + + +SetpointManager:OutdoorAirPretreat, + VAV_mid WITH REHEAT Heat Exhchanger Supply Air Temp Manager, !- Name + Temperature, !- Control Variable + -99, !- Minimum Setpoint Temperature {C} + 99, !- Maximum Setpoint Temperature {C} + 0.00001, !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir} + 1.0, !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir} + VAV_mid WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Reference Setpoint Node Name + VAV_mid WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Mixed Air Stream Node Name + VAV_mid WITH REHEAT_OAInlet Node, !- Outdoor Air Stream Node Name + VAV_mid WITH REHEAT Supply Equipment Inlet Node, !- Return Air Stream Node Name + VAV_mid WITH REHEAT Heat Recovery Outlet Node; !- Setpoint Node or NodeList Name + + + + + + + + + + +SetpointManager:OutdoorAirPretreat, + VAV_top WITH REHEAT Heat Exhchanger Supply Air Temp Manager, !- Name + Temperature, !- Control Variable + -99, !- Minimum Setpoint Temperature {C} + 99, !- Maximum Setpoint Temperature {C} + 0.00001, !- Minimum Setpoint Humidity Ratio {kgWater/kgDryAir} + 1.0, !- Maximum Setpoint Humidity Ratio {kgWater/kgDryAir} + VAV_top WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Reference Setpoint Node Name + VAV_top WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Mixed Air Stream Node Name + VAV_top WITH REHEAT_OAInlet Node, !- Outdoor Air Stream Node Name + VAV_top WITH REHEAT Supply Equipment Inlet Node, !- Return Air Stream Node Name + VAV_top WITH REHEAT Heat Recovery Outlet Node; !- Setpoint Node or NodeList Name + + + + + + +!- =========== ALL OBJECTS IN CLASS: CONTROLLER:SIMPLE =========== + + + Controller:WaterCoil, + CAV_bas_CoolC_Controller,!- Name + Temperature, !- Control Variable + REVERSE, !- Action + FLOW, !- Actuator Variable + CAV_bas_CoolC-CAV_HeatCNode, !- Sensor Node Name + CAV_bas_CoolCDemand Inlet Node, !- Actuator Node Name + , !- Controller Convergence Tolerance {deltaC} + AUTOSIZE, !- Maximum Actuated Flow {m3/s} + 0.0; !- Minimum Actuated Flow {m3/s} + + + + Controller:WaterCoil, + CAV_bas_HeatC_Controller,!- Name + Temperature, !- Control Variable + NORMAL, !- Action + FLOW, !- Actuator Variable + CAV_bas_HeatC-CAV_FanNode, !- Sensor Node Name + CAV_bas_HeatCDemand Inlet Node, !- Actuator Node Name + 0.0001, !- Controller Convergence Tolerance {deltaC} + AUTOSIZE, !- Maximum Actuated Flow {m3/s} + 0.0; !- Minimum Actuated Flow {m3/s} + + + + Controller:WaterCoil, + VAV_bot WITH REHEAT_CoolC_Controller, !- Name + Temperature, !- Control Variable + REVERSE, !- Action + FLOW, !- Actuator Variable + VAV_bot WITH REHEAT_CoolC-VAV WITH REHEAT_HeatCNode, !- Sensor Node Name + VAV_bot WITH REHEAT_CoolCDemand Inlet Node, !- Actuator Node Name + , !- Controller Convergence Tolerance {deltaC} + AUTOSIZE, !- Maximum Actuated Flow {m3/s} + 0.0; !- Minimum Actuated Flow {m3/s} + + + + Controller:WaterCoil, + VAV_bot WITH REHEAT_HeatC_Controller, !- Name + Temperature, !- Control Variable + NORMAL, !- Action + FLOW, !- Actuator Variable + VAV_bot WITH REHEAT_HeatC-VAV WITH REHEAT FanNode, !- Sensor Node Name + VAV_bot WITH REHEAT_HeatCDemand Inlet Node, !- Actuator Node Name + 0.0001, !- Controller Convergence Tolerance {deltaC} + AUTOSIZE, !- Maximum Actuated Flow {m3/s} + 0.0; !- Minimum Actuated Flow {m3/s} + + + + Controller:WaterCoil, + VAV_mid WITH REHEAT_CoolC_Controller, !- Name + Temperature, !- Control Variable + REVERSE, !- Action + FLOW, !- Actuator Variable + VAV_mid WITH REHEAT_CoolC-VAV WITH REHEAT_HeatCNode, !- Sensor Node Name + VAV_mid WITH REHEAT_CoolCDemand Inlet Node, !- Actuator Node Name + , !- Controller Convergence Tolerance {deltaC} + AUTOSIZE, !- Maximum Actuated Flow {m3/s} + 0.0; !- Minimum Actuated Flow {m3/s} + + + + Controller:WaterCoil, + VAV_mid WITH REHEAT_HeatC_Controller, !- Name + Temperature, !- Control Variable + NORMAL, !- Action + FLOW, !- Actuator Variable + VAV_mid WITH REHEAT_HeatC-VAV WITH REHEAT FanNode, !- Sensor Node Name + VAV_mid WITH REHEAT_HeatCDemand Inlet Node, !- Actuator Node Name + 0.0001, !- Controller Convergence Tolerance {deltaC} + AUTOSIZE, !- Maximum Actuated Flow {m3/s} + 0.0; !- Minimum Actuated Flow {m3/s} + + + + Controller:WaterCoil, + VAV_top WITH REHEAT_CoolC_Controller, !- Name + Temperature, !- Control Variable + REVERSE, !- Action + FLOW, !- Actuator Variable + VAV_top WITH REHEAT_CoolC-VAV WITH REHEAT_HeatCNode, !- Sensor Node Name + VAV_top WITH REHEAT_CoolCDemand Inlet Node, !- Actuator Node Name + , !- Controller Convergence Tolerance {deltaC} + AUTOSIZE, !- Maximum Actuated Flow {m3/s} + 0.0; !- Minimum Actuated Flow {m3/s} + + + + Controller:WaterCoil, + VAV_top WITH REHEAT_HeatC_Controller, !- Name + Temperature, !- Control Variable + NORMAL, !- Action + FLOW, !- Actuator Variable + VAV_top WITH REHEAT_HeatC-VAV WITH REHEAT FanNode, !- Sensor Node Name + VAV_top WITH REHEAT_HeatCDemand Inlet Node, !- Actuator Node Name + 0.0001, !- Controller Convergence Tolerance {deltaC} + AUTOSIZE, !- Maximum Actuated Flow {m3/s} + 0.0; !- Minimum Actuated Flow {m3/s} + + + Controller:WaterCoil, + DataCenter_bas_HeatC_Controller,!- Name + Temperature, !- Control Variable + NORMAL, !- Action + FLOW, !- Actuator Variable + AirLoop DataCenter Basement Supply Air Outlet, !- Sensor Node Name + DataCenter_ExtraWaterHeatCDemand Inlet Node, !- Actuator Node Name + , !- Controller Convergence Tolerance {deltaC} + AUTOSIZE, !- Maximum Actuated Flow {m3/s} + 0.0; !- Minimum Actuated Flow {m3/s} + +!- =========== ALL OBJECTS IN CLASS: CONTROLLER:OUTSIDE AIR =========== + + + Controller:OutdoorAir, + CAV_bas_OA_Controller, !- Name + CAV_bas_OARelief Node, !- Relief Air Outlet Node Name + CAV_bas Supply Equipment Inlet Node, !- Return Air Node Name + CAV_bas_OA-CAV_CoolCNode, !- Mixed Air Node Name + CAV_bas_OAInlet Node, !- Actuator Node Name + AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} + AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} + DifferentialDryBulb, !- Economizer Control Type + ModulateFlow, !- Economizer Control Action Type +, !- Economizer Maximum Limit Dry-Bulb Temperature {C} !- Economizer Maximum Limit Dry-Bulb Temperature {C} + , !- Economizer Maximum Limit Enthalpy {J/kg} + , !- Economizer Maximum Limit Dewpoint Temperature {C} + , !- Electronic Enthalpy Limit Curve Name + , !- Economizer Minimum Limit Dry-Bulb Temperature {C} + NoLockout, !- Lockout Type + FixedMinimum, !- Minimum Limit Type + MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name + , !- Minimum Fraction of Outdoor Air Schedule Name + , !- Maximum Fraction of Outdoor Air Schedule Name + , !- Mechanical Ventilation Controller Name + , !- Time of Day Economizer Control Schedule Name + , !- High Humidity Control + , !- Humidistat Control Zone Name + , !- High Humidity Outdoor Air Flow Ratio + , !- Control High Indoor Humidity Based on Outdoor Humidity Ratio + ; !- Heat Recovery Bypass Control Type!- Heat Recovery Bypass Control Type + Controller:OutdoorAir, + VAV_bot WITH REHEAT_OA_Controller, !- Name + VAV_bot WITH REHEAT_OARelief Node, !- Relief Air Outlet Node Name + VAV_bot WITH REHEAT Supply Equipment Inlet Node, !- Return Air Node Name + VAV_bot WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Mixed Air Node Name + VAV_bot WITH REHEAT_OAInlet Node, !- Actuator Node Name + 0, !- Minimum Outdoor Air Flow Rate {m3/s} !- Minimum Outdoor Air Flow Rate {m3/s} + AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} + DifferentialDryBulb, !- Economizer Control Type + ModulateFlow, !- Economizer Control Action Type +, !- Economizer Maximum Limit Dry-Bulb Temperature {C} !- Economizer Maximum Limit Dry-Bulb Temperature {C} + , !- Economizer Maximum Limit Enthalpy {J/kg} + , !- Economizer Maximum Limit Dewpoint Temperature {C} + , !- Electronic Enthalpy Limit Curve Name + , !- Economizer Minimum Limit Dry-Bulb Temperature {C} + NoLockout, !- Lockout Type + FixedMinimum, !- Minimum Limit Type + MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name + , !- Minimum Fraction of Outdoor Air Schedule Name + , !- Maximum Fraction of Outdoor Air Schedule Name + VAV_bot WITH REHEAT_DCV; !- Mechanical Ventilation Controller Name + + + + + Controller:OutdoorAir, + VAV_mid WITH REHEAT_OA_Controller, !- Name + VAV_mid WITH REHEAT_OARelief Node, !- Relief Air Outlet Node Name + VAV_mid WITH REHEAT Supply Equipment Inlet Node, !- Return Air Node Name + VAV_mid WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Mixed Air Node Name + VAV_mid WITH REHEAT_OAInlet Node, !- Actuator Node Name + 0, !- Minimum Outdoor Air Flow Rate {m3/s} !- Minimum Outdoor Air Flow Rate {m3/s} + AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} + DifferentialDryBulb, !- Economizer Control Type + ModulateFlow, !- Economizer Control Action Type +, !- Economizer Maximum Limit Dry-Bulb Temperature {C} !- Economizer Maximum Limit Dry-Bulb Temperature {C} + , !- Economizer Maximum Limit Enthalpy {J/kg} + , !- Economizer Maximum Limit Dewpoint Temperature {C} + , !- Electronic Enthalpy Limit Curve Name + , !- Economizer Minimum Limit Dry-Bulb Temperature {C} + NoLockout, !- Lockout Type + FixedMinimum, !- Minimum Limit Type + MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name + , !- Minimum Fraction of Outdoor Air Schedule Name + , !- Maximum Fraction of Outdoor Air Schedule Name + VAV_mid WITH REHEAT_DCV; !- Mechanical Ventilation Controller Name + + + + + Controller:OutdoorAir, + VAV_top WITH REHEAT_OA_Controller, !- Name + VAV_top WITH REHEAT_OARelief Node, !- Relief Air Outlet Node Name + VAV_top WITH REHEAT Supply Equipment Inlet Node, !- Return Air Node Name + VAV_top WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Mixed Air Node Name + VAV_top WITH REHEAT_OAInlet Node, !- Actuator Node Name + 0, !- Minimum Outdoor Air Flow Rate {m3/s} + AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} + DifferentialDryBulb, !- Economizer Control Type + ModulateFlow, !- Economizer Control Action Type +, !- Economizer Maximum Limit Dry-Bulb Temperature {C} + , !- Economizer Maximum Limit Enthalpy {J/kg} + , !- Economizer Maximum Limit Dewpoint Temperature {C} + , !- Electronic Enthalpy Limit Curve Name + , !- Economizer Minimum Limit Dry-Bulb Temperature {C} + NoLockout, !- Lockout Type + FixedMinimum, !- Minimum Limit Type + MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name + , !- Minimum Fraction of Outdoor Air Schedule Name + , !- Maximum Fraction of Outdoor Air Schedule Name + VAV_top WITH REHEAT_DCV; !- Mechanical Ventilation Controller Name + + +!- Controller OA Objects for Data Center + + + Controller:OutdoorAir, + AirLoop DataCenter Basement OA Controller, !- Name + DataCenter Basement Relief Air Outlet, !- Relief Air Outlet Node Name + AirLoop DataCenter Basement Return Air Inlet, !- Return Air Node Name + DataCenter Basement Mixed Air Outlet, !- Mixed Air Node Name + DataCenter Basement Outside Air Inlet, !- Actuator Node Name + autosize, !- Minimum Outdoor Air Flow Rate {m3/s} + autosize, !- Maximum Outdoor Air Flow Rate {m3/s} + DifferentialDryBulb, !- Economizer Control Type + ModulateFlow, !- Economizer Control Action Type + , !- Economizer Maximum Limit Dry-Bulb Temperature {C} + , !- Economizer Maximum Limit Enthalpy {J/kg} + , !- Economizer Maximum Limit Dewpoint Temperature {C} + , !- Electronic Enthalpy Limit Curve Name + , !- Economizer Minimum Limit Dry-Bulb Temperature {C} + NoLockout, !- Lockout Type + FixedMinimum, !- Minimum Limit Type + MinOA_MotorizedDamper_Sched; !- Minimum Outdoor Air Schedule Name + + + + Controller:OutdoorAir, + AirLoop DataCenter bot OA Controller, !- Name + DataCenter bot Relief Air Outlet, !- Relief Air Outlet Node Name + AirLoop DataCenter bot Return Air Inlet, !- Return Air Node Name + DataCenter bot Mixed Air Outlet, !- Mixed Air Node Name + DataCenter bot Outside Air Inlet, !- Actuator Node Name + 0, !- Minimum Outdoor Air Flow Rate {m3/s} + autosize, !- Maximum Outdoor Air Flow Rate {m3/s} + NoEconomizer, !- Economizer Control Type + ModulateFlow, !- Economizer Control Action Type + , !- Economizer Maximum Limit Dry-Bulb Temperature {C} !- Economizer Maximum Limit Dry-Bulb Temperature {C} + , !- Economizer Maximum Limit Enthalpy {J/kg} + , !- Economizer Maximum Limit Dewpoint Temperature {C} + , !- Electronic Enthalpy Limit Curve Name + , !- Economizer Minimum Limit Dry-Bulb Temperature {C} + NoLockout, !- Lockout Type + FixedMinimum, !- Minimum Limit Type + MinOA_MotorizedDamper_Sched; !- Minimum Outdoor Air Schedule Name + + + + Controller:OutdoorAir, + AirLoop DataCenter mid OA Controller, !- Name + DataCenter mid Relief Air Outlet, !- Relief Air Outlet Node Name + AirLoop DataCenter mid Return Air Inlet, !- Return Air Node Name + DataCenter mid Mixed Air Outlet, !- Mixed Air Node Name + DataCenter mid Outside Air Inlet, !- Actuator Node Name + 0, !- Minimum Outdoor Air Flow Rate {m3/s} + autosize, !- Maximum Outdoor Air Flow Rate {m3/s} + NoEconomizer, !- Economizer Control Type + ModulateFlow, !- Economizer Control Action Type + , !- Economizer Maximum Limit Dry-Bulb Temperature {C} !- Economizer Maximum Limit Dry-Bulb Temperature {C} + , !- Economizer Maximum Limit Enthalpy {J/kg} + , !- Economizer Maximum Limit Dewpoint Temperature {C} + , !- Electronic Enthalpy Limit Curve Name + , !- Economizer Minimum Limit Dry-Bulb Temperature {C} + NoLockout, !- Lockout Type + FixedMinimum, !- Minimum Limit Type + MinOA_MotorizedDamper_Sched; !- Minimum Outdoor Air Schedule Name + + + + Controller:OutdoorAir, + AirLoop DataCenter top OA Controller, !- Name + DataCenter top Relief Air Outlet, !- Relief Air Outlet Node Name + AirLoop DataCenter top Return Air Inlet, !- Return Air Node Name + DataCenter top Mixed Air Outlet, !- Mixed Air Node Name + DataCenter top Outside Air Inlet, !- Actuator Node Name + 0, !- Minimum Outdoor Air Flow Rate {m3/s} + autosize, !- Maximum Outdoor Air Flow Rate {m3/s} + NoEconomizer, !- Economizer Control Type + ModulateFlow, !- Economizer Control Action Type + , !- Economizer Maximum Limit Dry-Bulb Temperature {C} !- Economizer Maximum Limit Dry-Bulb Temperature {C} + , !- Economizer Maximum Limit Enthalpy {J/kg} + , !- Economizer Maximum Limit Dewpoint Temperature {C} + , !- Electronic Enthalpy Limit Curve Name + , !- Economizer Minimum Limit Dry-Bulb Temperature {C} + NoLockout, !- Lockout Type + FixedMinimum, !- Minimum Limit Type + MinOA_MotorizedDamper_Sched; !- Minimum Outdoor Air Schedule Name + +!- =========== ALL OBJECTS IN CLASS: CONTROLLER:MECHANICALVENTILATION =========== + + + Controller:MechanicalVentilation, + VAV_top WITH REHEAT_DCV, !- Name + MinOA_MotorizedDamper_Sched, !- Availability Schedule Name + Yes, !- Demand Controlled Ventilation + VentilationRateProcedure,!- System Outdoor Air Method + , !- Zone Maximum Outdoor Air Fraction {dimensionless} + Core_top, !- Zone 1 Name + CM DSOA Core_top, !- Design Specification Outdoor Air Object Name + CM DSZAD Core_top, !- Design Specification Zone Air Distribution Object Name + Perimeter_top_ZN_1, !- Zone 2 Name + CM DSOA Perimeter_top_ZN_1, !- Design Specification Outdoor Air Object Name + CM DSZAD Perimeter_top_ZN_1, !- Design Specification Zone Air Distribution Object Name + Perimeter_top_ZN_2, !- Zone 3 Name + CM DSOA Perimeter_top_ZN_2, !- Design Specification Outdoor Air Object Name + CM DSZAD Perimeter_top_ZN_2, !- Design Specification Zone Air Distribution Object Name + Perimeter_top_ZN_3, !- Zone 4 Name + CM DSOA Perimeter_top_ZN_3, !- Design Specification Outdoor Air Object Name + CM DSZAD Perimeter_top_ZN_3, !- Design Specification Zone Air Distribution Object Name + Perimeter_top_ZN_4, !- Zone 5 Name + CM DSOA Perimeter_top_ZN_4, !- Design Specification Outdoor Air Object Name + CM DSZAD Perimeter_top_ZN_4; !- Design Specification Zone Air Distribution Object Name + + + DesignSpecification:ZoneAirDistribution, + CM DSZAD Core_top, !- Name + 1, !- Zone Air Distribution Effectiveness in Cooling Mode 1 {dimensionless} + 1, !- Zone Air Distribution Effectiveness in Heating Mode 1 {dimensionless} + ; !- Zone Air Distribution Effectiveness Schedule Name 1 + + DesignSpecification:ZoneAirDistribution, + CM DSZAD Perimeter_top_ZN_1, !- Name + 1, !- Zone Air Distribution Effectiveness in Cooling Mode 2 {dimensionless} + 1, !- Zone Air Distribution Effectiveness in Heating Mode 2 {dimensionless} + ; !- Zone Air Distribution Effectiveness Schedule Name 2 + + DesignSpecification:ZoneAirDistribution, + CM DSZAD Perimeter_top_ZN_2, !- Name + 1, !- Zone Air Distribution Effectiveness in Cooling Mode 3 {dimensionless} + 1, !- Zone Air Distribution Effectiveness in Heating Mode 3 {dimensionless} + ; !- Zone Air Distribution Effectiveness Schedule Name 3 + + DesignSpecification:ZoneAirDistribution, + CM DSZAD Perimeter_top_ZN_3, !- Name + 1, !- Zone Air Distribution Effectiveness in Cooling Mode 4 {dimensionless} + 1, !- Zone Air Distribution Effectiveness in Heating Mode 4 {dimensionless} + ; !- Zone Air Distribution Effectiveness Schedule Name 4 + + DesignSpecification:ZoneAirDistribution, + CM DSZAD Perimeter_top_ZN_4, !- Name + 1, !- Zone Air Distribution Effectiveness in Cooling Mode 5 {dimensionless} + 1, !- Zone Air Distribution Effectiveness in Heating Mode 5 {dimensionless} + ; !- Zone Air Distribution Effectiveness Schedule Name 5 + + + DesignSpecification:OutdoorAir, + CM DSOA Core_top, !- Name + Sum, !- Zone Outdoor Air Method + 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} + 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} + + DesignSpecification:OutdoorAir, + CM DSOA Perimeter_top_ZN_1, !- Name + Sum, !- Zone Outdoor Air Method + 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} + 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} + + DesignSpecification:OutdoorAir, + CM DSOA Perimeter_top_ZN_2, !- Name + Sum, !- Zone Outdoor Air Method + 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} + 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} + + DesignSpecification:OutdoorAir, + CM DSOA Perimeter_top_ZN_3, !- Name + Sum, !- Zone Outdoor Air Method + 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} + 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} + + DesignSpecification:OutdoorAir, + CM DSOA Perimeter_top_ZN_4, !- Name + Sum, !- Zone Outdoor Air Method + 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} + 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} + + + + Controller:MechanicalVentilation, + VAV_bot WITH REHEAT_DCV, !- Name + MinOA_MotorizedDamper_Sched, !- Availability Schedule Name + Yes, !- Demand Controlled Ventilation + VentilationRateProcedure,!- System Outdoor Air Method + , !- Zone Maximum Outdoor Air Fraction {dimensionless} + Core_bottom, !- Zone 1 Name + CM DSOA Core_bottom, !- Design Specification Outdoor Air Object Name + CM DSZAD Core_bottom, !- Design Specification Zone Air Distribution Object Name + Perimeter_bot_ZN_1, !- Zone 2 Name + CM DSOA Perimeter_bot_ZN_1, !- Design Specification Outdoor Air Object Name + CM DSZAD Perimeter_bot_ZN_1, !- Design Specification Zone Air Distribution Object Name + Perimeter_bot_ZN_2, !- Zone 3 Name + CM DSOA Perimeter_bot_ZN_2, !- Design Specification Outdoor Air Object Name + CM DSZAD Perimeter_bot_ZN_2, !- Design Specification Zone Air Distribution Object Name + Perimeter_bot_ZN_3, !- Zone 4 Name + CM DSOA Perimeter_bot_ZN_3, !- Design Specification Outdoor Air Object Name + CM DSZAD Perimeter_bot_ZN_3, !- Design Specification Zone Air Distribution Object Name + Perimeter_bot_ZN_4, !- Zone 5 Name + CM DSOA Perimeter_bot_ZN_4, !- Design Specification Outdoor Air Object Name + CM DSZAD Perimeter_bot_ZN_4; !- Design Specification Zone Air Distribution Object Name + + + DesignSpecification:ZoneAirDistribution, + CM DSZAD Core_bottom, !- Name + 1, !- Zone Air Distribution Effectiveness in Cooling Mode 1 {dimensionless} + 1, !- Zone Air Distribution Effectiveness in Heating Mode 1 {dimensionless} + ; !- Zone Air Distribution Effectiveness Schedule Name 1 + + DesignSpecification:ZoneAirDistribution, + CM DSZAD Perimeter_bot_ZN_1, !- Name + 1, !- Zone Air Distribution Effectiveness in Cooling Mode 2 {dimensionless} + 1, !- Zone Air Distribution Effectiveness in Heating Mode 2 {dimensionless} + ; !- Zone Air Distribution Effectiveness Schedule Name 2 + + DesignSpecification:ZoneAirDistribution, + CM DSZAD Perimeter_bot_ZN_2, !- Name + 1, !- Zone Air Distribution Effectiveness in Cooling Mode 3 {dimensionless} + 1, !- Zone Air Distribution Effectiveness in Heating Mode 3 {dimensionless} + ; !- Zone Air Distribution Effectiveness Schedule Name 3 + + DesignSpecification:ZoneAirDistribution, + CM DSZAD Perimeter_bot_ZN_3, !- Name + 1, !- Zone Air Distribution Effectiveness in Cooling Mode 4 {dimensionless} + 1, !- Zone Air Distribution Effectiveness in Heating Mode 4 {dimensionless} + ; !- Zone Air Distribution Effectiveness Schedule Name 4 + + DesignSpecification:ZoneAirDistribution, + CM DSZAD Perimeter_bot_ZN_4, !- Name + 1, !- Zone Air Distribution Effectiveness in Cooling Mode 5 {dimensionless} + 1, !- Zone Air Distribution Effectiveness in Heating Mode 5 {dimensionless} + ; !- Zone Air Distribution Effectiveness Schedule Name 5 + + + DesignSpecification:OutdoorAir, + CM DSOA Core_bottom, !- Name + Sum, !- Zone Outdoor Air Method + 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} + 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} + + DesignSpecification:OutdoorAir, + CM DSOA Perimeter_bot_ZN_1, !- Name + Sum, !- Zone Outdoor Air Method + 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} + 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} + + DesignSpecification:OutdoorAir, + CM DSOA Perimeter_bot_ZN_2, !- Name + Sum, !- Zone Outdoor Air Method + 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} + 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} + + DesignSpecification:OutdoorAir, + CM DSOA Perimeter_bot_ZN_3, !- Name + Sum, !- Zone Outdoor Air Method + 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} + 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} + + DesignSpecification:OutdoorAir, + CM DSOA Perimeter_bot_ZN_4, !- Name + Sum, !- Zone Outdoor Air Method + 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} + 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} + + + + Controller:MechanicalVentilation, + VAV_mid WITH REHEAT_DCV, !- Name + MinOA_MotorizedDamper_Sched, !- Availability Schedule Name + Yes, !- Demand Controlled Ventilation + VentilationRateProcedure,!- System Outdoor Air Method + , !- Zone Maximum Outdoor Air Fraction {dimensionless} + Core_mid, !- Zone 1 Name + CM DSOA Core_mid, !- Design Specification Outdoor Air Object Name + CM DSZAD Core_mid, !- Design Specification Zone Air Distribution Object Name + Perimeter_mid_ZN_1, !- Zone 2 Name + CM DSOA Perimeter_mid_ZN_1, !- Design Specification Outdoor Air Object Name + CM DSZAD Perimeter_mid_ZN_1, !- Design Specification Zone Air Distribution Object Name + Perimeter_mid_ZN_2, !- Zone 3 Name + CM DSOA Perimeter_mid_ZN_2, !- Design Specification Outdoor Air Object Name + CM DSZAD Perimeter_mid_ZN_2, !- Design Specification Zone Air Distribution Object Name + Perimeter_mid_ZN_3, !- Zone 4 Name + CM DSOA Perimeter_mid_ZN_3, !- Design Specification Outdoor Air Object Name + CM DSZAD Perimeter_mid_ZN_3, !- Design Specification Zone Air Distribution Object Name + Perimeter_mid_ZN_4, !- Zone 5 Name + CM DSOA Perimeter_mid_ZN_4, !- Design Specification Outdoor Air Object Name + CM DSZAD Perimeter_mid_ZN_4; !- Design Specification Zone Air Distribution Object Name + + + DesignSpecification:ZoneAirDistribution, + CM DSZAD Core_mid, !- Name + 1, !- Zone Air Distribution Effectiveness in Cooling Mode 1 {dimensionless} + 1, !- Zone Air Distribution Effectiveness in Heating Mode 1 {dimensionless} + ; !- Zone Air Distribution Effectiveness Schedule Name 1 + + DesignSpecification:ZoneAirDistribution, + CM DSZAD Perimeter_mid_ZN_1, !- Name + 1, !- Zone Air Distribution Effectiveness in Cooling Mode 2 {dimensionless} + 1, !- Zone Air Distribution Effectiveness in Heating Mode 2 {dimensionless} + ; !- Zone Air Distribution Effectiveness Schedule Name 2 + + DesignSpecification:ZoneAirDistribution, + CM DSZAD Perimeter_mid_ZN_2, !- Name + 1, !- Zone Air Distribution Effectiveness in Cooling Mode 3 {dimensionless} + 1, !- Zone Air Distribution Effectiveness in Heating Mode 3 {dimensionless} + ; !- Zone Air Distribution Effectiveness Schedule Name 3 + + DesignSpecification:ZoneAirDistribution, + CM DSZAD Perimeter_mid_ZN_3, !- Name + 1, !- Zone Air Distribution Effectiveness in Cooling Mode 4 {dimensionless} + 1, !- Zone Air Distribution Effectiveness in Heating Mode 4 {dimensionless} + ; !- Zone Air Distribution Effectiveness Schedule Name 4 + + DesignSpecification:ZoneAirDistribution, + CM DSZAD Perimeter_mid_ZN_4, !- Name + 1, !- Zone Air Distribution Effectiveness in Cooling Mode 5 {dimensionless} + 1, !- Zone Air Distribution Effectiveness in Heating Mode 5 {dimensionless} + ; !- Zone Air Distribution Effectiveness Schedule Name 5 + + + DesignSpecification:OutdoorAir, + CM DSOA Core_mid, !- Name + Sum, !- Zone Outdoor Air Method + 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} + 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} + + DesignSpecification:OutdoorAir, + CM DSOA Perimeter_mid_ZN_1, !- Name + Sum, !- Zone Outdoor Air Method + 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} + 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} + + DesignSpecification:OutdoorAir, + CM DSOA Perimeter_mid_ZN_2, !- Name + Sum, !- Zone Outdoor Air Method + 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} + 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} + + DesignSpecification:OutdoorAir, + CM DSOA Perimeter_mid_ZN_3, !- Name + Sum, !- Zone Outdoor Air Method + 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} + 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} + + DesignSpecification:OutdoorAir, + CM DSOA Perimeter_mid_ZN_4, !- Name + Sum, !- Zone Outdoor Air Method + 0.00000001, !- Outdoor Air Flow per Person {m3/s-person} + 0.000431773; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} + +!- =========== ALL OBJECTS IN CLASS: CONTROLLED ZONE EQUIP CONFIGURATION =========== + + + ZoneHVAC:EquipmentConnections, + Basement, !- Zone Name + Basement Equipment, !- Zone Conditioning Equipment List Name + Basement Inlet Nodes, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + Basement Air Node, !- Zone Air Node Name + Basement Return Air Node;!- Zone Return Air Node Name + + + + ZoneHVAC:EquipmentConnections, + Core_bottom, !- Zone Name + Core_bottom Equipment, !- Zone Conditioning Equipment List Name + Core_bottom Inlet Nodes, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + Core_bottom Air Node, !- Zone Air Node Name + Core_bottom Return Air Node; !- Zone Return Air Node Name + + + + ZoneHVAC:EquipmentConnections, + Core_mid, !- Zone Name + Core_mid Equipment, !- Zone Conditioning Equipment List Name + Core_mid Inlet Nodes, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + Core_mid Air Node, !- Zone Air Node Name + Core_mid Return Air Node;!- Zone Return Air Node Name + + + + ZoneHVAC:EquipmentConnections, + Core_top, !- Zone Name + Core_top Equipment, !- Zone Conditioning Equipment List Name + Core_top Inlet Nodes, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + Core_top Air Node, !- Zone Air Node Name + Core_top Return Air Node;!- Zone Return Air Node Name + + + + ZoneHVAC:EquipmentConnections, + Perimeter_bot_ZN_3, !- Zone Name + Perimeter_bot_ZN_3 Equipment, !- Zone Conditioning Equipment List Name + Perimeter_bot_ZN_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + Perimeter_bot_ZN_3 Air Node, !- Zone Air Node Name + Perimeter_bot_ZN_3 Return Air Node; !- Zone Return Air Node Name + + + + ZoneHVAC:EquipmentConnections, + Perimeter_bot_ZN_2, !- Zone Name + Perimeter_bot_ZN_2 Equipment, !- Zone Conditioning Equipment List Name + Perimeter_bot_ZN_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + Perimeter_bot_ZN_2 Air Node, !- Zone Air Node Name + Perimeter_bot_ZN_2 Return Air Node; !- Zone Return Air Node Name + + + + ZoneHVAC:EquipmentConnections, + Perimeter_bot_ZN_1, !- Zone Name + Perimeter_bot_ZN_1 Equipment, !- Zone Conditioning Equipment List Name + Perimeter_bot_ZN_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + Perimeter_bot_ZN_1 Air Node, !- Zone Air Node Name + Perimeter_bot_ZN_1 Return Air Node; !- Zone Return Air Node Name + + + + ZoneHVAC:EquipmentConnections, + Perimeter_bot_ZN_4, !- Zone Name + Perimeter_bot_ZN_4 Equipment, !- Zone Conditioning Equipment List Name + Perimeter_bot_ZN_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + Perimeter_bot_ZN_4 Air Node, !- Zone Air Node Name + Perimeter_bot_ZN_4 Return Air Node; !- Zone Return Air Node Name + + + + ZoneHVAC:EquipmentConnections, + Perimeter_mid_ZN_3, !- Zone Name + Perimeter_mid_ZN_3 Equipment, !- Zone Conditioning Equipment List Name + Perimeter_mid_ZN_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + Perimeter_mid_ZN_3 Air Node, !- Zone Air Node Name + Perimeter_mid_ZN_3 Return Air Node; !- Zone Return Air Node Name + + + + ZoneHVAC:EquipmentConnections, + Perimeter_mid_ZN_2, !- Zone Name + Perimeter_mid_ZN_2 Equipment, !- Zone Conditioning Equipment List Name + Perimeter_mid_ZN_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + Perimeter_mid_ZN_2 Air Node, !- Zone Air Node Name + Perimeter_mid_ZN_2 Return Air Node; !- Zone Return Air Node Name + + + + ZoneHVAC:EquipmentConnections, + Perimeter_mid_ZN_1, !- Zone Name + Perimeter_mid_ZN_1 Equipment, !- Zone Conditioning Equipment List Name + Perimeter_mid_ZN_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + Perimeter_mid_ZN_1 Air Node, !- Zone Air Node Name + Perimeter_mid_ZN_1 Return Air Node; !- Zone Return Air Node Name + + + + ZoneHVAC:EquipmentConnections, + Perimeter_mid_ZN_4, !- Zone Name + Perimeter_mid_ZN_4 Equipment, !- Zone Conditioning Equipment List Name + Perimeter_mid_ZN_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + Perimeter_mid_ZN_4 Air Node, !- Zone Air Node Name + Perimeter_mid_ZN_4 Return Air Node; !- Zone Return Air Node Name + + + + ZoneHVAC:EquipmentConnections, + Perimeter_top_ZN_3, !- Zone Name + Perimeter_top_ZN_3 Equipment, !- Zone Conditioning Equipment List Name + Perimeter_top_ZN_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + Perimeter_top_ZN_3 Air Node, !- Zone Air Node Name + Perimeter_top_ZN_3 Return Air Node; !- Zone Return Air Node Name + + + + ZoneHVAC:EquipmentConnections, + Perimeter_top_ZN_2, !- Zone Name + Perimeter_top_ZN_2 Equipment, !- Zone Conditioning Equipment List Name + Perimeter_top_ZN_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + Perimeter_top_ZN_2 Air Node, !- Zone Air Node Name + Perimeter_top_ZN_2 Return Air Node; !- Zone Return Air Node Name + + + + ZoneHVAC:EquipmentConnections, + Perimeter_top_ZN_1, !- Zone Name + Perimeter_top_ZN_1 Equipment, !- Zone Conditioning Equipment List Name + Perimeter_top_ZN_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + Perimeter_top_ZN_1 Air Node, !- Zone Air Node Name + Perimeter_top_ZN_1 Return Air Node; !- Zone Return Air Node Name + + + + ZoneHVAC:EquipmentConnections, + Perimeter_top_ZN_4, !- Zone Name + Perimeter_top_ZN_4 Equipment, !- Zone Conditioning Equipment List Name + Perimeter_top_ZN_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + Perimeter_top_ZN_4 Air Node, !- Zone Air Node Name + Perimeter_top_ZN_4 Return Air Node; !- Zone Return Air Node Name + +!- Data Center + + + ZoneHVAC:EquipmentConnections, + DataCenter_basement_ZN_6,!- Zone Name + DataCenter Basement Equipment, !- Zone Conditioning Equipment List Name + DataCenter Basement Inlets, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + DataCenter Basement Zone Air Node, !- Zone Air Node Name + DataCenter Basement Return Outlet; !- Zone Return Air Node Name + + + + ZoneHVAC:EquipmentConnections, + DataCenter_bot_ZN_6, !- Zone Name + DataCenter bot Equipment,!- Zone Conditioning Equipment List Name + DataCenter bot Inlets, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + DataCenter bot Zone Air Node, !- Zone Air Node Name + DataCenter bot Return Outlet; !- Zone Return Air Node Name + + + + ZoneHVAC:EquipmentConnections, + DataCenter_mid_ZN_6, !- Zone Name + DataCenter mid Equipment,!- Zone Conditioning Equipment List Name + DataCenter mid Inlets, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + DataCenter mid Zone Air Node, !- Zone Air Node Name + DataCenter mid Return Outlet; !- Zone Return Air Node Name + + + + ZoneHVAC:EquipmentConnections, + DataCenter_top_ZN_6, !- Zone Name + DataCenter top Equipment,!- Zone Conditioning Equipment List Name + DataCenter top Inlets, !- Zone Air Inlet Node or NodeList Name + , !- Zone Air Exhaust Node or NodeList Name + DataCenter top Zone Air Node, !- Zone Air Node Name + DataCenter top Return Outlet; !- Zone Return Air Node Name + +!- =========== ALL OBJECTS IN CLASS: ZONE EQUIPMENT LIST =========== + + + ZoneHVAC:EquipmentList, + Basement Equipment, !- Name + AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type + Basement Direct Air, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + + + + ZoneHVAC:EquipmentList, + Core_bottom Equipment, !- Name + ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type + Core_bottom VAV Box, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + + + + ZoneHVAC:EquipmentList, + Core_mid Equipment, !- Name + ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type + Core_mid VAV Box, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + + + + ZoneHVAC:EquipmentList, + Core_top Equipment, !- Name + ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type + Core_top VAV Box, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + + + + ZoneHVAC:EquipmentList, + Perimeter_bot_ZN_3 Equipment, !- Name + ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type + Perimeter_bot_ZN_3 VAV Box, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + + + + ZoneHVAC:EquipmentList, + Perimeter_bot_ZN_2 Equipment, !- Name + ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type + Perimeter_bot_ZN_2 VAV Box, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + + + + ZoneHVAC:EquipmentList, + Perimeter_bot_ZN_1 Equipment, !- Name + ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type + Perimeter_bot_ZN_1 VAV Box, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + + + + ZoneHVAC:EquipmentList, + Perimeter_bot_ZN_4 Equipment, !- Name + ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type + Perimeter_bot_ZN_4 VAV Box, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + + + + ZoneHVAC:EquipmentList, + Perimeter_mid_ZN_3 Equipment, !- Name + ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type + Perimeter_mid_ZN_3 VAV Box, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + + + + ZoneHVAC:EquipmentList, + Perimeter_mid_ZN_2 Equipment, !- Name + ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type + Perimeter_mid_ZN_2 VAV Box, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + + + + ZoneHVAC:EquipmentList, + Perimeter_mid_ZN_1 Equipment, !- Name + ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type + Perimeter_mid_ZN_1 VAV Box, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + + + + ZoneHVAC:EquipmentList, + Perimeter_mid_ZN_4 Equipment, !- Name + ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type + Perimeter_mid_ZN_4 VAV Box, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + + + + ZoneHVAC:EquipmentList, + Perimeter_top_ZN_3 Equipment, !- Name + ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type + Perimeter_top_ZN_3 VAV Box, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + + + + ZoneHVAC:EquipmentList, + Perimeter_top_ZN_2 Equipment, !- Name + ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type + Perimeter_top_ZN_2 VAV Box, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + + + + ZoneHVAC:EquipmentList, + Perimeter_top_ZN_1 Equipment, !- Name + ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type + Perimeter_top_ZN_1 VAV Box, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + + + + ZoneHVAC:EquipmentList, + Perimeter_top_ZN_4 Equipment, !- Name + ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type + Perimeter_top_ZN_4 VAV Box, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + +!- Data Center + + + ZoneHVAC:EquipmentList, + DataCenter Basement Equipment, !- Name + AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type + DataCenter Basement Direct Air, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + + + + ZoneHVAC:EquipmentList, + DataCenter bot Equipment,!- Name + AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type + DataCenter bot Direct Air, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + + + + ZoneHVAC:EquipmentList, + DataCenter mid Equipment,!- Name + AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type + DataCenter mid Direct Air, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + + + + ZoneHVAC:EquipmentList, + DataCenter top Equipment,!- Name + AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type + DataCenter top Direct Air, !- Zone Equipment 1 Name + 1, !- Zone Equipment 1 Cooling Sequence + 1; !- Zone Equipment 1 Heating or No-Load Sequence + +!- =========== ALL OBJECTS IN CLASS: AIR DISTRIBUTION UNIT =========== + + + ZoneHVAC:AirDistributionUnit, + Core_bottom VAV Box, !- Name + Core_bottom VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name + AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type + Core_bottom VAV Box Component; !- Air Terminal Name + + + + ZoneHVAC:AirDistributionUnit, + Core_mid VAV Box, !- Name + Core_mid VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name + AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type + Core_mid VAV Box Component; !- Air Terminal Name + + + + ZoneHVAC:AirDistributionUnit, + Core_top VAV Box, !- Name + Core_top VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name + AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type + Core_top VAV Box Component; !- Air Terminal Name + + + + ZoneHVAC:AirDistributionUnit, + Perimeter_bot_ZN_3 VAV Box, !- Name + Perimeter_bot_ZN_3 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name + AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type + Perimeter_bot_ZN_3 VAV Box Component; !- Air Terminal Name + + + + ZoneHVAC:AirDistributionUnit, + Perimeter_bot_ZN_2 VAV Box, !- Name + Perimeter_bot_ZN_2 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name + AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type + Perimeter_bot_ZN_2 VAV Box Component; !- Air Terminal Name + + + + ZoneHVAC:AirDistributionUnit, + Perimeter_bot_ZN_1 VAV Box, !- Name + Perimeter_bot_ZN_1 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name + AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type + Perimeter_bot_ZN_1 VAV Box Component; !- Air Terminal Name + + + + ZoneHVAC:AirDistributionUnit, + Perimeter_bot_ZN_4 VAV Box, !- Name + Perimeter_bot_ZN_4 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name + AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type + Perimeter_bot_ZN_4 VAV Box Component; !- Air Terminal Name + + + + ZoneHVAC:AirDistributionUnit, + Perimeter_mid_ZN_3 VAV Box, !- Name + Perimeter_mid_ZN_3 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name + AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type + Perimeter_mid_ZN_3 VAV Box Component; !- Air Terminal Name + + + + ZoneHVAC:AirDistributionUnit, + Perimeter_mid_ZN_2 VAV Box, !- Name + Perimeter_mid_ZN_2 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name + AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type + Perimeter_mid_ZN_2 VAV Box Component; !- Air Terminal Name + + + + ZoneHVAC:AirDistributionUnit, + Perimeter_mid_ZN_1 VAV Box, !- Name + Perimeter_mid_ZN_1 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name + AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type + Perimeter_mid_ZN_1 VAV Box Component; !- Air Terminal Name + + + + ZoneHVAC:AirDistributionUnit, + Perimeter_mid_ZN_4 VAV Box, !- Name + Perimeter_mid_ZN_4 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name + AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type + Perimeter_mid_ZN_4 VAV Box Component; !- Air Terminal Name + + + + ZoneHVAC:AirDistributionUnit, + Perimeter_top_ZN_3 VAV Box, !- Name + Perimeter_top_ZN_3 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name + AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type + Perimeter_top_ZN_3 VAV Box Component; !- Air Terminal Name + + + + ZoneHVAC:AirDistributionUnit, + Perimeter_top_ZN_2 VAV Box, !- Name + Perimeter_top_ZN_2 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name + AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type + Perimeter_top_ZN_2 VAV Box Component; !- Air Terminal Name + + + + ZoneHVAC:AirDistributionUnit, + Perimeter_top_ZN_1 VAV Box, !- Name + Perimeter_top_ZN_1 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name + AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type + Perimeter_top_ZN_1 VAV Box Component; !- Air Terminal Name + + + + ZoneHVAC:AirDistributionUnit, + Perimeter_top_ZN_4 VAV Box, !- Name + Perimeter_top_ZN_4 VAV Box Outlet Node, !- Air Distribution Unit Outlet Node Name + AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type + Perimeter_top_ZN_4 VAV Box Component; !- Air Terminal Name + +!- =========== ALL OBJECTS IN CLASS: AIRTERMINAL:SINGLEDUCT:UNCONTROLLED =========== + + + AirTerminal:SingleDuct:Uncontrolled, + Basement Direct Air, !- Name + ALWAYS_ON, !- Availability Schedule Name + Basement Direct Air Inlet Node Name, !- Zone Supply Air Node Name + AUTOSIZE; !- Maximum Air Flow Rate {m3/s} + + + + AirTerminal:SingleDuct:Uncontrolled, + DataCenter Basement Direct Air, !- Name + Always_On, !- Availability Schedule Name + DataCenter Basement Supply Inlet, !- Zone Supply Air Node Name + autosize; !- Maximum Air Flow Rate {m3/s} + + + + AirTerminal:SingleDuct:Uncontrolled, + DataCenter bot Direct Air, !- Name + Always_On, !- Availability Schedule Name + DataCenter bot Supply Inlet, !- Zone Supply Air Node Name + autosize; !- Maximum Air Flow Rate {m3/s} + + + + AirTerminal:SingleDuct:Uncontrolled, + DataCenter mid Direct Air, !- Name + Always_On, !- Availability Schedule Name + DataCenter mid Supply Inlet, !- Zone Supply Air Node Name + autosize; !- Maximum Air Flow Rate {m3/s} + + + + AirTerminal:SingleDuct:Uncontrolled, + DataCenter top Direct Air, !- Name + Always_On, !- Availability Schedule Name + DataCenter top Supply Inlet, !- Zone Supply Air Node Name + autosize; !- Maximum Air Flow Rate {m3/s} + +!- =========== ALL OBJECTS IN CLASS: AIRTERMINAL:SINGLEDUCT:VAV:REHEAT =========== + + AirTerminal:SingleDuct:VAV:Reheat, + Core_bottom VAV Box Component, !- Name + ALWAYS_ON, !- Availability Schedule Name + Core_bottom VAV Box Damper Node, !- Damper Air Outlet Node Name + Core_bottom VAV Box Inlet Node, !- Air Inlet Node Name + AUTOSIZE, !- Maximum Air Flow Rate {m3/s} + Constant, !- Zone Minimum Air Flow Input Method + 0.350126958326493, !- Constant Minimum Air Flow Fraction + , !- Fixed Minimum Air Flow Rate {m3/s} + , !- Minimum Air Flow Fraction Schedule Name + Coil:Heating:Water, !- Reheat Coil Object Type + Core_bottom VAV Box Reheat Coil, !- Reheat Coil Name + AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} + 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} + Core_bottom VAV Box Outlet Node, !- Air Outlet Node Name + 0.001, !- Convergence Tolerance + reverse, !- Damper Heating Action + , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} + 0.5, !- Maximum Flow Fraction During Reheat + 40; !- Maximum Reheat Air Temperature {C} + + + + AirTerminal:SingleDuct:VAV:Reheat, + Core_mid VAV Box Component, !- Name + ALWAYS_ON, !- Availability Schedule Name + Core_mid VAV Box Damper Node, !- Damper Air Outlet Node Name + Core_mid VAV Box Inlet Node, !- Air Inlet Node Name + AUTOSIZE, !- Maximum Air Flow Rate {m3/s} + Constant, !- Zone Minimum Air Flow Input Method + 0.352451847263012, !- Constant Minimum Air Flow Fractionrac + , !- Fixed Minimum Air Flow Rate {m3/s} + , !- Minimum Air Flow Fraction Schedule Name + Coil:Heating:Water, !- Reheat Coil Object Type + Core_mid VAV Box Reheat Coil, !- Reheat Coil Name + AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} + 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} + Core_mid VAV Box Outlet Node, !- Air Outlet Node Name + 0.001, !- Convergence Tolerance + reverse, !- Damper Heating Action + , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} + 0.5, !- Maximum Flow Fraction During Reheat + 40; !- Maximum Reheat Air Temperature {C} + + + + AirTerminal:SingleDuct:VAV:Reheat, + Core_top VAV Box Component, !- Name + ALWAYS_ON, !- Availability Schedule Name + Core_top VAV Box Damper Node, !- Damper Air Outlet Node Name + Core_top VAV Box Inlet Node, !- Air Inlet Node Name + AUTOSIZE, !- Maximum Air Flow Rate {m3/s} + Constant, !- Zone Minimum Air Flow Input Method + 0.357010610037435, !- Constant Minimum Air Flow Fractionrac + , !- Fixed Minimum Air Flow Rate {m3/s} + , !- Minimum Air Flow Fraction Schedule Name + Coil:Heating:Water, !- Reheat Coil Object Type + Core_top VAV Box Reheat Coil, !- Reheat Coil Name + AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} + 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} + Core_top VAV Box Outlet Node, !- Air Outlet Node Name + 0.001, !- Convergence Tolerance + reverse, !- Damper Heating Action + , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} + 0.5, !- Maximum Flow Fraction During Reheat + 40; !- Maximum Reheat Air Temperature {C} + + + + AirTerminal:SingleDuct:VAV:Reheat, + Perimeter_bot_ZN_3 VAV Box Component, !- Name + ALWAYS_ON, !- Availability Schedule Name + Perimeter_bot_ZN_3 VAV Box Damper Node, !- Damper Air Outlet Node Name + Perimeter_bot_ZN_3 VAV Box Inlet Node, !- Air Inlet Node Name + AUTOSIZE, !- Maximum Air Flow Rate {m3/s} + Constant, !- Zone Minimum Air Flow Input Method + 0.272142928526643, !- Constant Minimum Air Flow Fraction + , !- Fixed Minimum Air Flow Rate {m3/s} + , !- Minimum Air Flow Fraction Schedule Name + Coil:Heating:Water, !- Reheat Coil Object Type + Perimeter_bot_ZN_3 VAV Box Reheat Coil, !- Reheat Coil Name + AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} + 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} + Perimeter_bot_ZN_3 VAV Box Outlet Node, !- Air Outlet Node Name + 0.001, !- Convergence Tolerance + reverse, !- Damper Heating Action + , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} + 0.5, !- Maximum Flow Fraction During Reheat + 40; !- Maximum Reheat Air Temperature {C} + + + + AirTerminal:SingleDuct:VAV:Reheat, + Perimeter_bot_ZN_2 VAV Box Component, !- Name + ALWAYS_ON, !- Availability Schedule Name + Perimeter_bot_ZN_2 VAV Box Damper Node, !- Damper Air Outlet Node Name + Perimeter_bot_ZN_2 VAV Box Inlet Node, !- Air Inlet Node Name + AUTOSIZE, !- Maximum Air Flow Rate {m3/s} + Constant, !- Zone Minimum Air Flow Input Method + 0.2, !- Constant Minimum Air Flow Fraction + , !- Fixed Minimum Air Flow Rate {m3/s} + , !- Minimum Air Flow Fraction Schedule Name + Coil:Heating:Water, !- Reheat Coil Object Type + Perimeter_bot_ZN_2 VAV Box Reheat Coil, !- Reheat Coil Name + AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} + 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} + Perimeter_bot_ZN_2 VAV Box Outlet Node, !- Air Outlet Node Name + 0.001, !- Convergence Tolerance + reverse, !- Damper Heating Action + , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} + 0.5, !- Maximum Flow Fraction During Reheat + 40; !- Maximum Reheat Air Temperature {C} + + + + AirTerminal:SingleDuct:VAV:Reheat, + Perimeter_bot_ZN_1 VAV Box Component, !- Name + ALWAYS_ON, !- Availability Schedule Name + Perimeter_bot_ZN_1 VAV Box Damper Node, !- Damper Air Outlet Node Name + Perimeter_bot_ZN_1 VAV Box Inlet Node, !- Air Inlet Node Name + AUTOSIZE, !- Maximum Air Flow Rate {m3/s} + Constant, !- Zone Minimum Air Flow Input Method + 0.2, !- Constant Minimum Air Flow Fraction + , !- Fixed Minimum Air Flow Rate {m3/s} + , !- Minimum Air Flow Fraction Schedule Name + Coil:Heating:Water, !- Reheat Coil Object Type + Perimeter_bot_ZN_1 VAV Box Reheat Coil, !- Reheat Coil Name + AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} + 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} + Perimeter_bot_ZN_1 VAV Box Outlet Node, !- Air Outlet Node Name + 0.001, !- Convergence Tolerance + reverse, !- Damper Heating Action + , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} + 0.5, !- Maximum Flow Fraction During Reheat + 40; !- Maximum Reheat Air Temperature {C} + + + + AirTerminal:SingleDuct:VAV:Reheat, + Perimeter_bot_ZN_4 VAV Box Component, !- Name + ALWAYS_ON, !- Availability Schedule Name + Perimeter_bot_ZN_4 VAV Box Damper Node, !- Damper Air Outlet Node Name + Perimeter_bot_ZN_4 VAV Box Inlet Node, !- Air Inlet Node Name + AUTOSIZE, !- Maximum Air Flow Rate {m3/s} + Constant, !- Zone Minimum Air Flow Input Method + 0.2, !- Constant Minimum Air Flow Fraction + , !- Fixed Minimum Air Flow Rate {m3/s} + , !- Minimum Air Flow Fraction Schedule Name + Coil:Heating:Water, !- Reheat Coil Object Type + Perimeter_bot_ZN_4 VAV Box Reheat Coil, !- Reheat Coil Name + AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} + 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} + Perimeter_bot_ZN_4 VAV Box Outlet Node, !- Air Outlet Node Name + 0.001, !- Convergence Tolerance + reverse, !- Damper Heating Action + , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} + 0.5, !- Maximum Flow Fraction During Reheat + 40; !- Maximum Reheat Air Temperature {C} + + + + AirTerminal:SingleDuct:VAV:Reheat, + Perimeter_mid_ZN_3 VAV Box Component, !- Name + ALWAYS_ON, !- Availability Schedule Name + Perimeter_mid_ZN_3 VAV Box Damper Node, !- Damper Air Outlet Node Name + Perimeter_mid_ZN_3 VAV Box Inlet Node, !- Air Inlet Node Name + AUTOSIZE, !- Maximum Air Flow Rate {m3/s} + Constant, !- Zone Minimum Air Flow Input Method + 0.282138420658207, !- Constant Minimum Air Flow Fraction + , !- Fixed Minimum Air Flow Rate {m3/s} + , !- Minimum Air Flow Fraction Schedule Name + Coil:Heating:Water, !- Reheat Coil Object Type + Perimeter_mid_ZN_3 VAV Box Reheat Coil, !- Reheat Coil Name + AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} + 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} + Perimeter_mid_ZN_3 VAV Box Outlet Node, !- Air Outlet Node Name + 0.001, !- Convergence Tolerance + reverse, !- Damper Heating Action + , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} + 0.5, !- Maximum Flow Fraction During Reheat + 40; !- Maximum Reheat Air Temperature {C} + + + + AirTerminal:SingleDuct:VAV:Reheat, + Perimeter_mid_ZN_2 VAV Box Component, !- Name + ALWAYS_ON, !- Availability Schedule Name + Perimeter_mid_ZN_2 VAV Box Damper Node, !- Damper Air Outlet Node Name + Perimeter_mid_ZN_2 VAV Box Inlet Node, !- Air Inlet Node Name + AUTOSIZE, !- Maximum Air Flow Rate {m3/s} + Constant, !- Zone Minimum Air Flow Input Method + 0.2, !- Constant Minimum Air Flow Fraction + , !- Fixed Minimum Air Flow Rate {m3/s} + , !- Minimum Air Flow Fraction Schedule Name + Coil:Heating:Water, !- Reheat Coil Object Type + Perimeter_mid_ZN_2 VAV Box Reheat Coil, !- Reheat Coil Name + AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} + 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} + Perimeter_mid_ZN_2 VAV Box Outlet Node, !- Air Outlet Node Name + 0.001, !- Convergence Tolerance + reverse, !- Damper Heating Action + , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} + 0.5, !- Maximum Flow Fraction During Reheat + 40; !- Maximum Reheat Air Temperature {C} + + + + AirTerminal:SingleDuct:VAV:Reheat, + Perimeter_mid_ZN_1 VAV Box Component, !- Name + ALWAYS_ON, !- Availability Schedule Name + Perimeter_mid_ZN_1 VAV Box Damper Node, !- Damper Air Outlet Node Name + Perimeter_mid_ZN_1 VAV Box Inlet Node, !- Air Inlet Node Name + AUTOSIZE, !- Maximum Air Flow Rate {m3/s} + Constant, !- Zone Minimum Air Flow Input Method + 0.2, !- Constant Minimum Air Flow Fraction + , !- Fixed Minimum Air Flow Rate {m3/s} + , !- Minimum Air Flow Fraction Schedule Name + Coil:Heating:Water, !- Reheat Coil Object Type + Perimeter_mid_ZN_1 VAV Box Reheat Coil, !- Reheat Coil Name + AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} + 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} + Perimeter_mid_ZN_1 VAV Box Outlet Node, !- Air Outlet Node Name + 0.001, !- Convergence Tolerance + reverse, !- Damper Heating Action + , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} + 0.5, !- Maximum Flow Fraction During Reheat + 40; !- Maximum Reheat Air Temperature {C} + + + + AirTerminal:SingleDuct:VAV:Reheat, + Perimeter_mid_ZN_4 VAV Box Component, !- Name + ALWAYS_ON, !- Availability Schedule Name + Perimeter_mid_ZN_4 VAV Box Damper Node, !- Damper Air Outlet Node Name + Perimeter_mid_ZN_4 VAV Box Inlet Node, !- Air Inlet Node Name + AUTOSIZE, !- Maximum Air Flow Rate {m3/s} + Constant, !- Zone Minimum Air Flow Input Method + 0.2, !- Constant Minimum Air Flow Fraction + , !- Fixed Minimum Air Flow Rate {m3/s} + , !- Minimum Air Flow Fraction Schedule Name + Coil:Heating:Water, !- Reheat Coil Object Type + Perimeter_mid_ZN_4 VAV Box Reheat Coil, !- Reheat Coil Name + AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} + 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} + Perimeter_mid_ZN_4 VAV Box Outlet Node, !- Air Outlet Node Name + 0.001, !- Convergence Tolerance + reverse, !- Damper Heating Action + , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} + 0.5, !- Maximum Flow Fraction During Reheat + 40; !- Maximum Reheat Air Temperature {C} + + + + AirTerminal:SingleDuct:VAV:Reheat, + Perimeter_top_ZN_3 VAV Box Component, !- Name + ALWAYS_ON, !- Availability Schedule Name + Perimeter_top_ZN_3 VAV Box Damper Node, !- Damper Air Outlet Node Name + Perimeter_top_ZN_3 VAV Box Inlet Node, !- Air Inlet Node Name + AUTOSIZE, !- Maximum Air Flow Rate {m3/s} + Constant, !- Zone Minimum Air Flow Input Method + 0.255775329072062, !- Constant Minimum Air Flow Fraction + , !- Fixed Minimum Air Flow Rate {m3/s} + , !- Minimum Air Flow Fraction Schedule Name + Coil:Heating:Water, !- Reheat Coil Object Type + Perimeter_top_ZN_3 VAV Box Reheat Coil, !- Reheat Coil Name + AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} + 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} + Perimeter_top_ZN_3 VAV Box Outlet Node, !- Air Outlet Node Name + 0.001, !- Convergence Tolerance + reverse, !- Damper Heating Action + , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} + 0.5, !- Maximum Flow Fraction During Reheat + 40; !- Maximum Reheat Air Temperature {C} + + + + AirTerminal:SingleDuct:VAV:Reheat, + Perimeter_top_ZN_2 VAV Box Component, !- Name + ALWAYS_ON, !- Availability Schedule Name + Perimeter_top_ZN_2 VAV Box Damper Node, !- Damper Air Outlet Node Name + Perimeter_top_ZN_2 VAV Box Inlet Node, !- Air Inlet Node Name + AUTOSIZE, !- Maximum Air Flow Rate {m3/s} + Constant, !- Zone Minimum Air Flow Input Method + 0.2, !- Constant Minimum Air Flow Fraction + , !- Fixed Minimum Air Flow Rate {m3/s} + , !- Minimum Air Flow Fraction Schedule Name + Coil:Heating:Water, !- Reheat Coil Object Type + Perimeter_top_ZN_2 VAV Box Reheat Coil, !- Reheat Coil Name + AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} + 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} + Perimeter_top_ZN_2 VAV Box Outlet Node, !- Air Outlet Node Name + 0.001, !- Convergence Tolerance + reverse, !- Damper Heating Action + , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} + 0.5, !- Maximum Flow Fraction During Reheat + 40; !- Maximum Reheat Air Temperature {C} + + + + AirTerminal:SingleDuct:VAV:Reheat, + Perimeter_top_ZN_1 VAV Box Component, !- Name + ALWAYS_ON, !- Availability Schedule Name + Perimeter_top_ZN_1 VAV Box Damper Node, !- Damper Air Outlet Node Name + Perimeter_top_ZN_1 VAV Box Inlet Node, !- Air Inlet Node Name + AUTOSIZE, !- Maximum Air Flow Rate {m3/s} + Constant, !- Zone Minimum Air Flow Input Method + 0.2, !- Constant Minimum Air Flow Fraction + , !- Fixed Minimum Air Flow Rate {m3/s} + , !- Minimum Air Flow Fraction Schedule Name + Coil:Heating:Water, !- Reheat Coil Object Type + Perimeter_top_ZN_1 VAV Box Reheat Coil, !- Reheat Coil Name + AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} + 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} + Perimeter_top_ZN_1 VAV Box Outlet Node, !- Air Outlet Node Name + 0.001, !- Convergence Tolerance + reverse, !- Damper Heating Action + , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} + 0.5, !- Maximum Flow Fraction During Reheat + 40; !- Maximum Reheat Air Temperature {C} + + + + AirTerminal:SingleDuct:VAV:Reheat, + Perimeter_top_ZN_4 VAV Box Component, !- Name + ALWAYS_ON, !- Availability Schedule Name + Perimeter_top_ZN_4 VAV Box Damper Node, !- Damper Air Outlet Node Name + Perimeter_top_ZN_4 VAV Box Inlet Node, !- Air Inlet Node Name + AUTOSIZE, !- Maximum Air Flow Rate {m3/s} + Constant, !- Zone Minimum Air Flow Input Method + 0.2, !- Constant Minimum Air Flow Fraction + , !- Fixed Minimum Air Flow Rate {m3/s} + , !- Minimum Air Flow Fraction Schedule Name + Coil:Heating:Water, !- Reheat Coil Object Type + Perimeter_top_ZN_4 VAV Box Reheat Coil, !- Reheat Coil Name + AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} + 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} + Perimeter_top_ZN_4 VAV Box Outlet Node, !- Air Outlet Node Name + 0.001, !- Convergence Tolerance + reverse, !- Damper Heating Action + , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} + 0.5, !- Maximum Flow Fraction During Reheat + 40; !- Maximum Reheat Air Temperature {C} + +!- =========== ALL OBJECTS IN CLASS: ZONECONTROL:HUMIDISTAT =========== + + + ZoneControl:Humidistat, + DataCenter Basement Humidistat, !- Name + DataCenter_basement_ZN_6,!- Zone Name + DC_MinRelHumSetSch; !- Humidifying Relative Humidity Setpoint Schedule Name + +!- =========== ALL OBJECTS IN CLASS: ZONE CONTROL:THERMOSTATIC =========== + + + ZoneControl:Thermostat, + Basement Thermostat, !- Name + Basement, !- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + Basement DualSPSched; !- Control 1 Name + + + + ZoneControl:Thermostat, + Core_bottom Thermostat, !- Name + Core_bottom, !- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + Core_bottom DualSPSched; !- Control 1 Name + + + + ZoneControl:Thermostat, + Core_mid Thermostat, !- Name + Core_mid, !- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + Core_mid DualSPSched; !- Control 1 Name + + + + ZoneControl:Thermostat, + Core_top Thermostat, !- Name + Core_top, !- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + Core_top DualSPSched; !- Control 1 Name + + + + ZoneControl:Thermostat, + Perimeter_bot_ZN_3 Thermostat, !- Name + Perimeter_bot_ZN_3, !- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name + + + + ZoneControl:Thermostat, + Perimeter_bot_ZN_2 Thermostat, !- Name + Perimeter_bot_ZN_2, !- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name + + + + ZoneControl:Thermostat, + Perimeter_bot_ZN_1 Thermostat, !- Name + Perimeter_bot_ZN_1, !- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name + + + + ZoneControl:Thermostat, + Perimeter_bot_ZN_4 Thermostat, !- Name + Perimeter_bot_ZN_4, !- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name + + + + ZoneControl:Thermostat, + Perimeter_mid_ZN_3 Thermostat, !- Name + Perimeter_mid_ZN_3, !- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name + + + + ZoneControl:Thermostat, + Perimeter_mid_ZN_2 Thermostat, !- Name + Perimeter_mid_ZN_2, !- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name + + + + ZoneControl:Thermostat, + Perimeter_mid_ZN_1 Thermostat, !- Name + Perimeter_mid_ZN_1, !- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name + + + + ZoneControl:Thermostat, + Perimeter_mid_ZN_4 Thermostat, !- Name + Perimeter_mid_ZN_4, !- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name + + + + ZoneControl:Thermostat, + Perimeter_top_ZN_3 Thermostat, !- Name + Perimeter_top_ZN_3, !- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name + + + + ZoneControl:Thermostat, + Perimeter_top_ZN_2 Thermostat, !- Name + Perimeter_top_ZN_2, !- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name + + + + ZoneControl:Thermostat, + Perimeter_top_ZN_1 Thermostat, !- Name + Perimeter_top_ZN_1, !- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name + + + + ZoneControl:Thermostat, + Perimeter_top_ZN_4 Thermostat, !- Name + Perimeter_top_ZN_4, !- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name + +!- Thermostat Control for Data Center + + + ZoneControl:Thermostat, + DataCenter Basement Thermostat, !- Name + DataCenter_basement_ZN_6,!- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + DataCenter Cooling Setpoints Dual SP Control; !- Control 1 Name + + + + ZoneControl:Thermostat, + DataCenter bot Thermostat, !- Name + DataCenter_bot_ZN_6, !- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + DataCenter Cooling Setpoints Dual SP Control; !- Control 1 Name + + + + ZoneControl:Thermostat, + DataCenter mid Thermostat, !- Name + DataCenter_mid_ZN_6, !- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + DataCenter Cooling Setpoints Dual SP Control; !- Control 1 Name + + + + ZoneControl:Thermostat, + DataCenter top Thermostat, !- Name + DataCenter_top_ZN_6, !- Zone or ZoneList Name + Dual Zone Control Type Sched, !- Control Type Schedule Name + ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type + DataCenter Cooling Setpoints Dual SP Control; !- Control 1 Name + +!- =========== ALL OBJECTS IN CLASS: DUAL SETPOINT WITH DEADBAND =========== + + + ThermostatSetpoint:DualSetpoint, + Basement DualSPSched, !- Name + HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Name + CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name + + + + ThermostatSetpoint:DualSetpoint, + Core_bottom DualSPSched, !- Name + HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Nameating Se + CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Nameedule Na + + + + ThermostatSetpoint:DualSetpoint, + Core_mid DualSPSched, !- Name + HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Nameating Se + CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Nameedule Na + + + + ThermostatSetpoint:DualSetpoint, + Core_top DualSPSched, !- Name + HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Nameating Se + CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Nameedule Na + + + + ThermostatSetpoint:DualSetpoint, + Perimeter_bot_ZN_3 DualSPSched, !- Name + HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Nameating Se + CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Nameedule Na + + + + ThermostatSetpoint:DualSetpoint, + Perimeter_bot_ZN_2 DualSPSched, !- Name + HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Nameating Se + CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Nameedule Na + + + + ThermostatSetpoint:DualSetpoint, + Perimeter_bot_ZN_1 DualSPSched, !- Name + HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Nameating Se + CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Nameedule Na + + + + ThermostatSetpoint:DualSetpoint, + Perimeter_bot_ZN_4 DualSPSched, !- Name + HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Nameating Se + CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Nameedule Na + + + + ThermostatSetpoint:DualSetpoint, + Perimeter_mid_ZN_3 DualSPSched, !- Name + HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Nameating Se + CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Nameedule Na + + + + ThermostatSetpoint:DualSetpoint, + Perimeter_mid_ZN_2 DualSPSched, !- Name + HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Nameating Se + CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Nameedule Na + + + + ThermostatSetpoint:DualSetpoint, + Perimeter_mid_ZN_1 DualSPSched, !- Name + HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Nameating Se + CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Nameedule Na + + + + ThermostatSetpoint:DualSetpoint, + Perimeter_mid_ZN_4 DualSPSched, !- Name + HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Nameating Se + CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Nameedule Na + + + + ThermostatSetpoint:DualSetpoint, + Perimeter_top_ZN_3 DualSPSched, !- Name + HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Nameating Se + CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Nameedule Na + + + + ThermostatSetpoint:DualSetpoint, + Perimeter_top_ZN_2 DualSPSched, !- Name + HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Nameating Se + CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Nameedule Na + + + + ThermostatSetpoint:DualSetpoint, + Perimeter_top_ZN_1 DualSPSched, !- Name + HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Nameating Se + CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Nameedule Na + + + + ThermostatSetpoint:DualSetpoint, + Perimeter_top_ZN_4 DualSPSched, !- Name + HTGSETP_SCH_YES_OPTIMUM, !- Heating Setpoint Temperature Schedule Nameating Se + CLGSETP_SCH_YES_OPTIMUM; !- Cooling Setpoint Temperature Schedule Nameedule Na + +!- Dual Setpoint Control for Data Center + + + ThermostatSetpoint:DualSetpoint, + DataCenter Cooling Setpoints Dual SP Control, !- Name + HTGSETP_DC_SCH, !- Heating Setpoint Temperature Schedule Name + CLGSETP_DC_SCH; !- Cooling Setpoint Temperature Schedule Name + +!- =========== ALL OBJECTS IN CLASS: ZONE SUPPLY AIR PATH =========== + + + AirLoopHVAC:SupplyPath, + CAV_bas, !- Name + CAV_bas Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name + AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type + CAV_bas Supply Air Splitter; !- Component 1 Name + + + + AirLoopHVAC:SupplyPath, + VAV_bot WITH REHEAT, !- Name + VAV_bot WITH REHEAT Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name + AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type + VAV_bot WITH REHEAT Supply Air Splitter; !- Component 1 Name + + + + AirLoopHVAC:SupplyPath, + VAV_mid WITH REHEAT, !- Name + VAV_mid WITH REHEAT Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name + AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type + VAV_mid WITH REHEAT Supply Air Splitter; !- Component 1 Name + + + + AirLoopHVAC:SupplyPath, + VAV_top WITH REHEAT, !- Name + VAV_top WITH REHEAT Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name + AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type + VAV_top WITH REHEAT Supply Air Splitter; !- Component 1 Name + +!- Data Center Supply Path + + + AirLoopHVAC:SupplyPath, + AirLoop DataCenter Basement Supply Path, !- Name + ZoneSplitter DataCenter Basement Supply Air Inlet, !- Supply Air Path Inlet Node Name + AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type + AirLoop DataCenter Basement Zone Splitter; !- Component 1 Name + + + + AirLoopHVAC:SupplyPath, + AirLoop DataCenter bot Supply Path, !- Name + ZoneSplitter DataCenter bot Supply Air Inlet, !- Supply Air Path Inlet Node Name + AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type + AirLoop DataCenter bot Zone Splitter; !- Component 1 Name + + + + AirLoopHVAC:SupplyPath, + AirLoop DataCenter mid Supply Path, !- Name + ZoneSplitter DataCenter mid Supply Air Inlet, !- Supply Air Path Inlet Node Name + AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type + AirLoop DataCenter mid Zone Splitter; !- Component 1 Name + + + + AirLoopHVAC:SupplyPath, + AirLoop DataCenter top Supply Path, !- Name + ZoneSplitter DataCenter top Supply Air Inlet, !- Supply Air Path Inlet Node Name + AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type + AirLoop DataCenter top Zone Splitter; !- Component 1 Name + +!- =========== ALL OBJECTS IN CLASS: ZONE RETURN AIR PATH =========== + + + AirLoopHVAC:ReturnPath, + CAV_bas Return Air Path, !- Name + CAV_bas Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name + AirLoopHVAC:ZoneMixer, !- Component 1 Object Type + CAV_bas Return Air Mixer;!- Component 1 Name + + + + AirLoopHVAC:ReturnPath, + VAV_bot WITH REHEAT Return Air Path, !- Name + VAV_bot WITH REHEAT Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name + AirLoopHVAC:ReturnPlenum,!- Component 1 Object Type + GroundFloor_Return_Plenum, !- Component 1 Name + AirLoopHVAC:ZoneMixer, !- Component 2 Object Type + VAV_bot WITH REHEAT Return Air Mixer; !- Component 2 Name + + + + AirLoopHVAC:ReturnPath, + VAV_mid WITH REHEAT Return Air Path, !- Name + VAV_mid WITH REHEAT Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name + AirLoopHVAC:ReturnPlenum,!- Component 1 Object Type + MidFloor_Return_Plenum, !- Component 1 Name + AirLoopHVAC:ZoneMixer, !- Component 2 Object Type + VAV_mid WITH REHEAT Return Air Mixer; !- Component 2 Name + + + + AirLoopHVAC:ReturnPath, + VAV_top WITH REHEAT Return Air Path, !- Name + VAV_top WITH REHEAT Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name + AirLoopHVAC:ReturnPlenum,!- Component 1 Object Type + TopFloor_Return_Plenum, !- Component 1 Name + AirLoopHVAC:ZoneMixer, !- Component 2 Object Type + VAV_top WITH REHEAT Return Air Mixer; !- Component 2 Name + + + + AirLoopHVAC:ReturnPath, + AirLoop DataCenter Basement Return Path, !- Name + ZoneMixer DataCenter Basement Return Air Outlet, !- Return Air Path Outlet Node Name + AirLoopHVAC:ZoneMixer, !- Component 1 Object Type + AirLoop DataCenter Basement Zone Mixer; !- Component 1 Name + + + + AirLoopHVAC:ReturnPath, + AirLoop DataCenter bot Return Path, !- Name + ZoneMixer DataCenter bot Return Air Outlet, !- Return Air Path Outlet Node Name + AirLoopHVAC:ZoneMixer, !- Component 1 Object Type + AirLoop DataCenter bot Zone Mixer; !- Component 1 Name + + + + AirLoopHVAC:ReturnPath, + AirLoop DataCenter mid Return Path, !- Name + ZoneMixer DataCenter mid Return Air Outlet, !- Return Air Path Outlet Node Name + AirLoopHVAC:ZoneMixer, !- Component 1 Object Type + AirLoop DataCenter mid Zone Mixer; !- Component 1 Name + + + + AirLoopHVAC:ReturnPath, + AirLoop DataCenter top Return Path, !- Name + ZoneMixer DataCenter top Return Air Outlet, !- Return Air Path Outlet Node Name + AirLoopHVAC:ZoneMixer, !- Component 1 Object Type + AirLoop DataCenter top Zone Mixer; !- Component 1 Name + +!- =========== ALL OBJECTS IN CLASS: ZONE RETURN PLENUM =========== + + + AirLoopHVAC:ReturnPlenum, + GroundFloor_Return_Plenum, !- Name + GroundFloor_Plenum, !- Zone Name + GroundFloor_Plenum Node, !- Zone Node Name + GroundFloor_Plenum Outlet Node, !- Outlet Node Name + , !- Induced Air Outlet Node or NodeList Name + Perimeter_bot_ZN_1 Return Air Node, !- Inlet 1 Node Name + Perimeter_bot_ZN_2 Return Air Node, !- Inlet 2 Node Name + Perimeter_bot_ZN_3 Return Air Node, !- Inlet 3 Node Name + Perimeter_bot_ZN_4 Return Air Node, !- Inlet 4 Node Name + Core_bottom Return Air Node; !- Inlet 5 Node Name + + + + AirLoopHVAC:ReturnPlenum, + MidFloor_Return_Plenum, !- Name + MidFloor_Plenum, !- Zone Name + MidFloor_Plenum Node, !- Zone Node Name + MidFloor_Plenum Outlet Node, !- Outlet Node Name + , !- Induced Air Outlet Node or NodeList Name + Perimeter_mid_ZN_1 Return Air Node, !- Inlet 1 Node Name + Perimeter_mid_ZN_2 Return Air Node, !- Inlet 2 Node Name + Perimeter_mid_ZN_3 Return Air Node, !- Inlet 3 Node Name + Perimeter_mid_ZN_4 Return Air Node, !- Inlet 4 Node Name + Core_mid Return Air Node;!- Inlet 5 Node Name + + + + AirLoopHVAC:ReturnPlenum, + TopFloor_Return_Plenum, !- Name + TopFloor_Plenum, !- Zone Name + TopFloor_Plenum Node, !- Zone Node Name + TopFloor_Plenum Outlet Node, !- Outlet Node Name + , !- Induced Air Outlet Node or NodeList Name + Perimeter_top_ZN_1 Return Air Node, !- Inlet 1 Node Name + Perimeter_top_ZN_2 Return Air Node, !- Inlet 2 Node Name + Perimeter_top_ZN_3 Return Air Node, !- Inlet 3 Node Name + Perimeter_top_ZN_4 Return Air Node, !- Inlet 4 Node Name + Core_top Return Air Node;!- Inlet 5 Node Name + +!- =========== ALL OBJECTS IN CLASS: ZONE SPLITTER =========== + + + AirLoopHVAC:ZoneSplitter, + CAV_bas Supply Air Splitter, !- Name + CAV_bas Zone Equipment Inlet Node, !- Inlet Node Name + Basement Direct Air Inlet Node Name; !- Outlet 1 Node Name + + + + AirLoopHVAC:ZoneSplitter, + VAV_bot WITH REHEAT Supply Air Splitter, !- Name + VAV_bot WITH REHEAT Zone Equipment Inlet Node, !- Inlet Node Name + Core_bottom VAV Box Inlet Node, !- Outlet 1 Node Name + Perimeter_bot_ZN_3 VAV Box Inlet Node, !- Outlet 2 Node Name + Perimeter_bot_ZN_2 VAV Box Inlet Node, !- Outlet 3 Node Name + Perimeter_bot_ZN_1 VAV Box Inlet Node, !- Outlet 4 Node Name + Perimeter_bot_ZN_4 VAV Box Inlet Node; !- Outlet 5 Node Name + + + + AirLoopHVAC:ZoneSplitter, + VAV_mid WITH REHEAT Supply Air Splitter, !- Name + VAV_mid WITH REHEAT Zone Equipment Inlet Node, !- Inlet Node Name + Core_mid VAV Box Inlet Node, !- Outlet 1 Node Name + Perimeter_mid_ZN_3 VAV Box Inlet Node, !- Outlet 2 Node Name + Perimeter_mid_ZN_2 VAV Box Inlet Node, !- Outlet 3 Node Name + Perimeter_mid_ZN_1 VAV Box Inlet Node, !- Outlet 4 Node Name + Perimeter_mid_ZN_4 VAV Box Inlet Node; !- Outlet 5 Node Name + + + + AirLoopHVAC:ZoneSplitter, + VAV_top WITH REHEAT Supply Air Splitter, !- Name + VAV_top WITH REHEAT Zone Equipment Inlet Node, !- Inlet Node Name + Core_top VAV Box Inlet Node, !- Outlet 1 Node Name + Perimeter_top_ZN_3 VAV Box Inlet Node, !- Outlet 2 Node Name + Perimeter_top_ZN_2 VAV Box Inlet Node, !- Outlet 3 Node Name + Perimeter_top_ZN_1 VAV Box Inlet Node, !- Outlet 4 Node Name + Perimeter_top_ZN_4 VAV Box Inlet Node; !- Outlet 5 Node Name + + + + AirLoopHVAC:ZoneSplitter, + AirLoop DataCenter Basement Zone Splitter, !- Name + ZoneSplitter DataCenter Basement Supply Air Inlet, !- Inlet Node Name + DataCenter Basement Supply Inlet; !- Outlet 1 Node Name + + + + AirLoopHVAC:ZoneSplitter, + AirLoop DataCenter bot Zone Splitter, !- Name + ZoneSplitter DataCenter bot Supply Air Inlet, !- Inlet Node Name + DataCenter bot Supply Inlet; !- Outlet 1 Node Name + + + + AirLoopHVAC:ZoneSplitter, + AirLoop DataCenter mid Zone Splitter, !- Name + ZoneSplitter DataCenter mid Supply Air Inlet, !- Inlet Node Name + DataCenter mid Supply Inlet; !- Outlet 1 Node Name + + + + AirLoopHVAC:ZoneSplitter, + AirLoop DataCenter top Zone Splitter, !- Name + ZoneSplitter DataCenter top Supply Air Inlet, !- Inlet Node Name + DataCenter top Supply Inlet; !- Outlet 1 Node Name + +!- =========== ALL OBJECTS IN CLASS: ZONE MIXER =========== + + + AirLoopHVAC:ZoneMixer, + CAV_bas Return Air Mixer,!- Name + CAV_bas Zone Equipment Outlet Node, !- Outlet Node Name + Basement Return Air Node;!- Inlet 1 Node Name + + + + AirLoopHVAC:ZoneMixer, + VAV_bot WITH REHEAT Return Air Mixer, !- Name + VAV_bot WITH REHEAT Zone Equipment Outlet Node, !- Outlet Node Name + GroundFloor_Plenum Outlet Node; !- Inlet 1 Node Name + + + + AirLoopHVAC:ZoneMixer, + VAV_mid WITH REHEAT Return Air Mixer, !- Name + VAV_mid WITH REHEAT Zone Equipment Outlet Node, !- Outlet Node Name + MidFloor_Plenum Outlet Node; !- Inlet 1 Node Name + + + + AirLoopHVAC:ZoneMixer, + VAV_top WITH REHEAT Return Air Mixer, !- Name + VAV_top WITH REHEAT Zone Equipment Outlet Node, !- Outlet Node Name + TopFloor_Plenum Outlet Node; !- Inlet 1 Node Name + + + + AirLoopHVAC:ZoneMixer, + AirLoop DataCenter Basement Zone Mixer, !- Name + ZoneMixer DataCenter Basement Return Air Outlet, !- Outlet Node Name + DataCenter Basement Return Outlet; !- Inlet 1 Node Name + + + + AirLoopHVAC:ZoneMixer, + AirLoop DataCenter bot Zone Mixer, !- Name + ZoneMixer DataCenter bot Return Air Outlet, !- Outlet Node Name + DataCenter bot Return Outlet; !- Inlet 1 Node Name + + + + AirLoopHVAC:ZoneMixer, + AirLoop DataCenter mid Zone Mixer, !- Name + ZoneMixer DataCenter mid Return Air Outlet, !- Outlet Node Name + DataCenter mid Return Outlet; !- Inlet 1 Node Name + + + + AirLoopHVAC:ZoneMixer, + AirLoop DataCenter top Zone Mixer, !- Name + ZoneMixer DataCenter top Return Air Outlet, !- Outlet Node Name + DataCenter top Return Outlet; !- Inlet 1 Node Name + +!- =========== ALL OBJECTS IN CLASS: BOILER:SIMPLE =========== + + + Boiler:HotWater, + HeatSys1 Boiler, !- Name + NATURALGAS, !- Fuel Type +1422106.94, !- Nominal Capacity {W} +0.8125, !- Nominal Thermal Efficiency + LeavingBoiler, !- Efficiency Curve Temperature Evaluation Variable + HeatSys1 Boiler Efficiency Curve, !- Normalized Boiler Efficiency Curve Name + 81.0, !- Design Water Outlet Temperature {C} + AUTOSIZE, !- Design Water Flow Rate {m3/s} + 0.0, !- Minimum Part Load Ratio + 1.2, !- Maximum Part Load Ratio + 1.0, !- Optimum Part Load Ratio + HeatSys1 Pump-HeatSys1 BoilerNode, !- Boiler Water Inlet Node Name + HeatSys1 Supply Equipment Outlet Node, !- Boiler Water Outlet Node Name + 95.0, !- Water Outlet Upper Temperature Limit {C} + LeavingSetpointModulated;!- Boiler Flow Mode + + + + + SetpointManager:Scheduled, + HeatSys1 Boiler Setpoint Manager, !- Name + Temperature, !- Control Variable + HW-Loop-Temp-Schedule, !- Schedule Name + HeatSys1 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name + + + +!- Data Center Plant Loop Boiler + + + Boiler:HotWater, + Dummy Boiler, !- Name + NaturalGas, !- Fuel Type +93894.07, !- Nominal Capacity {W} +0.8, !- Nominal Thermal Efficiency + LeavingBoiler, !- Efficiency Curve Temperature Evaluation Variable + Dummy Boiler Efficiency Curve, !- Normalized Boiler Efficiency Curve Name + 30., !- Design Water Outlet Temperature {C} + autosize, !- Design Water Flow Rate {m3/s} + 0.0, !- Minimum Part Load Ratio + 1.2, !- Maximum Part Load Ratio + 1.0, !- Optimum Part Load Ratio + Dummy Boiler Inlet Node, !- Boiler Water Inlet Node Name + Dummy Boiler Outlet Node,!- Boiler Water Outlet Node Name + 95, !- Water Outlet Upper Temperature Limit {C} + ConstantFlow; !- Boiler Flow Mode + + + + Curve:Quadratic, + HeatSys1 Boiler Efficiency Curve, !- Name + 1.0, !- Coefficient1 Constant + 0.0, !- Coefficient2 x + 0.0, !- Coefficient3 x**2 + 0, !- Minimum Value of x + 1; !- Maximum Value of x + + + + Curve:Quadratic, + Dummy Boiler Efficiency Curve, !- Name + 1.0, !- Coefficient1 Constant + 0.0, !- Coefficient2 x + 0.0, !- Coefficient3 x**2 + 0, !- Minimum Value of x + 1; !- Maximum Value of x + +!- =========== ALL OBJECTS IN CLASS: Chiller:Electric:ReformulatedEIR =========== + + + Chiller:Electric:ReformulatedEIR, + CoolSys1 Chiller1, !- Name +1156291.305, !- Reference Capacity {W} +6.28, !- Reference COP {W/W} + 6.6700, !- Reference Leaving Chilled Water Temperature {C} + 34.4444, !- Reference Leaving Condenser Water Temperature {C} +0.032833, !- Reference Chilled Water Flow Rate {m3/s} + AutoSize, !- Reference Condenser Water Flow Rate {m3/s} +WC_CENT_2010_PB_CAPFT, !- Cooling Capacity Function of Temperature Curve Name +WC_CENT_2010_PB_EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name +WC_CENT_300to600_2010_PB_EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name + 0.1000, !- Minimum Part Load Ratio + 1.0000, !- Maximum Part Load Ratio + 1.0000, !- Optimum Part Load Ratio + 0.1000, !- Minimum Unloading Ratio + CoolSys1 Pump-CoolSys1 Chiller1Node, !- Chilled Water Inlet Node Name + CoolSys1 Supply Equipment Outlet Node 1, !- Chilled Water Outlet Node Name + CoolSys1 Chiller1 Water Inlet Node, !- Condenser Inlet Node Name + CoolSys1 Chiller1 Water Outlet Node, !- Condenser Outlet Node Name + , !- Fraction of Compressor Electric Consumption Rejected by Condenser + 5.0000, !- Leaving Chilled Water Lower Temperature Limit {C} + ConstantFlow, !- Chiller Flow Mode Type + 0.0000; !- Design Heat Recovery Water Flow Rate {m3/s} + + + + Chiller:Electric:ReformulatedEIR, + CoolSys1 Chiller2, !- Name +1156291.305, !- Reference Capacity {W} +6.28, !- Reference COP {W/W} + 6.6700, !- Reference Leaving Chilled Water Temperature {C} + 34.4444, !- Reference Leaving Condenser Water Temperature {C} +0.032833, !- Reference Chilled Water Flow Rate {m3/s} + AutoSize, !- Reference Condenser Water Flow Rate {m3/s} +WC_CENT_2010_PB_CAPFT, !- Cooling Capacity Function of Temperature Curve Name +WC_CENT_2010_PB_EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name +WC_CENT_300to600_2010_PB_EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name + 0.1000, !- Minimum Part Load Ratio + 1.0000, !- Maximum Part Load Ratio + 1.0000, !- Optimum Part Load Ratio + 0.1000, !- Minimum Unloading Ratio + CoolSys1 Pump-CoolSys1 Chiller2Node, !- Chilled Water Inlet Node Name + CoolSys1 Supply Equipment Outlet Node 2, !- Chilled Water Outlet Node Name + CoolSys1 Chiller2 Water Inlet Node, !- Condenser Inlet Node Name + CoolSys1 Chiller2 Water Outlet Node, !- Condenser Outlet Node Name + , !- Fraction of Compressor Electric Consumption Rejected by Condenser + 5.0000, !- Leaving Chilled Water Lower Temperature Limit {C} + ConstantFlow, !- Chiller Flow Mode Type + 0.0000; !- Design Heat Recovery Water Flow Rate {m3/s} + +!- =========== ALL OBJECTS IN CLASS: WATER HEATER:MIXED =========== +! + + WaterHeater:Mixed, + SHWSys1 Water Heater, !- Name + 1.135624, !- Tank Volume {m3} + SHWSys1 Water Heater Setpoint Temperature Schedule, !- Setpoint Temperature Schedule Name + 2.0, !- Deadband Temperature Difference {deltaC} + 82.2222, !- Maximum Temperature Limit {C} + Cycle, !- Heater Control Type + 87921.32, !- Heater Maximum Capacity {W} + , !- Heater Minimum Capacity {W} + , !- Heater Ignition Minimum Flow Rate {m3/s} + , !- Heater Ignition Delay {s} + NATURALGAS, !- Heater Fuel Type + 0.803988738, !- Heater Thermal Efficiency + , !- Part Load Factor Curve Name + 7280.88, !- Off Cycle Parasitic Fuel Consumption Rate {W} + NATURALGAS, !- Off Cycle Parasitic Fuel Type + 0.8, !- Off Cycle Parasitic Heat Fraction to Tank + 7280.88, !- On Cycle Parasitic Fuel Consumption Rate {W} + NATURALGAS, !- On Cycle Parasitic Fuel Type + , !- On Cycle Parasitic Heat Fraction to Tank + zone, !- Ambient Temperature Indicator + , !- Ambient Temperature Schedule Name + BASEMENT, !- Ambient Temperature Zone Name + , !- Ambient Temperature Outdoor Air Node Name + 11.25413987, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K} + , !- Off Cycle Loss Fraction to Zone + 11.25413987, !- On Cycle Loss Coefficient to Ambient Temperature {W/K} + , !- On Cycle Loss Fraction to Zone + , !- Peak Use Flow Rate {m3/s} + , !- Use Flow Rate Fraction Schedule Name + , !- Cold Water Supply Temperature Schedule Name + SHWSys1 Pump-SHWSys1 Water HeaterNode, !- Use Side Inlet Node Name + SHWSys1 Supply Equipment Outlet Node, !- Use Side Outlet Node Name + 1.0, !- Use Side Effectiveness + , !- Source Side Inlet Node Name + , !- Source Side Outlet Node Name + 1.0, !- Source Side Effectiveness + AUTOSIZE, !- Use Side Design Flow Rate {m3/s} + AUTOSIZE, !- Source Side Design Flow Rate {m3/s} + 1.5; !- Indirect Water Heating Recovery Time {hr} + +!- =========== ALL OBJECTS IN CLASS: COOLING TOWER:TWO SPEED =========== + + + CoolingTower:VariableSpeed, + TowerWaterSys CoolTower 1, !- Name + TowerWaterSys Pump-TowerWaterSys CoolTower1Node, !- Water Inlet Node Name + TowerWaterSys Supply Equipment Outlet Node 1, !- Water Outlet Node Name + CoolToolsCrossFlow, !- Model Type + , !- Model Coefficient Name + , !- Design Inlet Air Wet-Bulb Temperature {C} + 3.9, !- Design Approach Temperature {deltaC} + 5.6, !- Design Range Temperature {deltaC} +0.04717, !- Design Water Flow Rate {m3/s} + autosize, !- Design Air Flow Rate {m3/s} +16671.1171602325, !- Design Fan Power {W} + Tower_Fan_Curve, !- Fan Power Ratio Function of Air Flow Rate Ratio Curve Name + 0.2, !- Minimum Air Flow Rate Ratio + 0.125, !- Fraction of Tower Capacity in Free Convection Regime + , !- Basin Heater Capacity {W/K} + , !- Basin Heater Setpoint Temperature {C} + , !- Basin Heater Operating Schedule Name + , !- Evaporation Loss Mode + , !- Evaporation Loss Factor {percent/K} + , !- Drift Loss Percent {percent} + , !- Blowdown Calculation Mode + , !- Blowdown Concentration Ratio + , !- Blowdown Makeup Water Usage Schedule Name + , !- Supply Water Storage Tank Name + , !- Outdoor Air Inlet Node Name + 2, !- Number of Cells + MaximalCell, !- Cell Control !- Cell Control + , !- Cell Minimum Water Flow Rate Fraction + , !- Cell Maximum Water Flow Rate Fraction + 1.000; !- Sizing Factor + + + + CoolingTower:VariableSpeed, + TowerWaterSys CoolTower 2, !- Name + TowerWaterSys Pump-TowerWaterSys CoolTower2Node, !- Water Inlet Node Name + TowerWaterSys Supply Equipment Outlet Node 2, !- Water Outlet Node Name + CoolToolsCrossFlow, !- Model Type + , !- Model Coefficient Name + , !- Design Inlet Air Wet-Bulb Temperature {C} + 3.9, !- Design Approach Temperature {deltaC} + 5.6, !- Design Range Temperature {deltaC} +0.04717, !- Design Water Flow Rate {m3/s} + autosize, !- Design Air Flow Rate {m3/s} +16671.1171602325, !- Design Fan Power {W} + Tower_Fan_Curve, !- Fan Power Ratio Function of Air Flow Rate Ratio Curve Name + 0.2, !- Minimum Air Flow Rate Ratio + 0.125, !- Fraction of Tower Capacity in Free Convection Regime + , !- Basin Heater Capacity {W/K} + , !- Basin Heater Setpoint Temperature {C} + , !- Basin Heater Operating Schedule Name + , !- Evaporation Loss Mode + , !- Evaporation Loss Factor {percent/K} + , !- Drift Loss Percent {percent} + , !- Blowdown Calculation Mode + , !- Blowdown Concentration Ratio + , !- Blowdown Makeup Water Usage Schedule Name + , !- Supply Water Storage Tank Name + , !- Outdoor Air Inlet Node Name + 2, !- Number of Cells + MaximalCell, !- Cell Control !- Cell Control + , !- Cell Minimum Water Flow Rate Fraction + , !- Cell Maximum Water Flow Rate Fraction + 1.000; !- Sizing Factor + +!- =========== ALL OBJECTS IN CLASS: FLUIDCOOLER:SINGLESPEED =========== + + FluidCooler:TwoSpeed, + Central Tower, !- Name + Central Tower Inlet Node,!- Water Inlet Node Name + Central Tower Outlet Node, !- Water Outlet Node Name + NominalCapacity, !- Performance Input Method + , !- U-factor Times Area Value at High Fan Speed {W/K} + , !- U-factor Times Area Value at Low Fan Speed {W/K} + 582060, !- High-Speed Nominal Capacity {W} + 291030, !- Low-Speed Nominal Capacity {W} + 51.67, !- Design Entering Water Temperature {C} + 35, !- Design Entering Air Temperature {C} + 25.6, !- Design Entering Air Wet-bulb Temperature {C} + autosize, !- Design Water Flow Rate {m3/s} + autosize, !- Air Flow Rate at High Fan Speed {m3/s} + autosize, !- Fan Power at High Fan Speed {W} + autosize, !- Air Flow Rate at Low Fan Speed {m3/s} + autosize; !- Fan Power at Low Fan Speed {W} + +!- =========== ALL OBJECTS IN CLASS: PUMP:VARIABLE SPEED =========== + + Pump:ConstantSpeed, + SHWSys1 Pump, !- Name + SHWSys1 Supply Inlet Node, !- Inlet Node Name + SHWSys1 Pump-SHWSys1 Water HeaterNodeviaConnector, !- Outlet Node Name + AUTOSIZE, !- Rated Flow Rate {m3/s} + 29891, !- Rated Pump Head {Pa} + AUTOSIZE, !- Rated Power Consumption {W} + 0.30, !- Motor Efficiency + 0.0, !- Fraction of Motor Inefficiencies to Fluid Stream + Intermittent; !- Pump Control Type + + + + Pump:VariableSpeed, + HeatSys1 Pump, !- Name + HeatSys1 Supply Inlet Node, !- Inlet Node Name + HeatSys1 Pump-HeatSys1 BoilerNodeviaConnector, !- Outlet Node Name + AUTOSIZE, !- Rated Flow Rate {m3/s} + 179352, !- Rated Pump Head {Pa} + AUTOSIZE, !- Rated Power Consumption {W} + 0.9, !- Motor Efficiency + 0.0, !- Fraction of Motor Inefficiencies to Fluid Stream + 0,0.0205, 0.4101,0.5753, !- VariableSpeed Pump Curve Coefficients + + 0, !- Minimum Flow Rate {m3/s} + Intermittent; + + + + + + Pump:ConstantSpeed, + CoolSys1 Chiller1 Pump, !- Name + CoolSys1 Chiller1 Pump Inlet Node, !- Inlet Node Name + CoolSys1 Pump-CoolSys1 Chiller1Node, !- Outlet Node Name + AUTOSIZE, !- Rated Flow Rate {m3/s} + 44761.27683, !- Rated Pump Head {Pa} + AUTOSIZE, !- Rated Power Consumption {W} + 0.9, !- Motor Efficiency + 0.0, !- Fraction of Motor Inefficiencies to Fluid Stream + Intermittent, !- Pump Control Type + ; !- Pump Flow Rate Schedule Name + + Pump:ConstantSpeed, + CoolSys1 Chiller2 Pump, !- Name + CoolSys1 Chiller2 Pump Inlet Node, !- Inlet Node Name + CoolSys1 Pump-CoolSys1 Chiller2Node, !- Outlet Node Name + AUTOSIZE, !- Rated Flow Rate {m3/s} + 44761.27683, !- Rated Pump Head {Pa} + AUTOSIZE, !- Rated Power Consumption {W} + 0.9, !- Motor Efficiency + 0.0, !- Fraction of Motor Inefficiencies to Fluid Stream + Intermittent, !- Pump Control Type + ; !- Pump Flow Rate Schedule Name + + + + + +Pump:VariableSpeed, + CoolSys1 Pump Secondary, !- Name + CoolSys1 Demand Inlet Node, !- Inlet Node Name + CoolSys1 Pump Secondary-CoolSys1 Demand Mixer, !- Outlet Node Name + autosize, !- Rated Flow Rate {m3/s} + 134283.8305, !- Rated Pump Head {Pa} + autosize, !- Rated Power Consumption {W} + 0.9, !- Motor Efficiency + 0, !- Fraction of Motor Inefficiencies to Fluid Stream + 0,0.0205, 0.4101,0.5753, !- VariableSpeed Pump Curve Coefficients + + 0, !- Minimum Flow Rate {m3/s} + Intermittent; + + +!- =========== ALL OBJECTS IN CLASS: PUMP:CONSTANT SPEED =========== +!- data Center Plant Loop Circulation Pump + + + Pump:ConstantSpeed, + Plant Circ Pump, !- Name + Plant Supply Inlet Node, !- Inlet Node Name + Plant Pump Outlet Node, !- Outlet Node Name + autosize, !- Rated Flow Rate {m3/s} + 179045.1073, !- Rated Pump Head {Pa} + autosize, !- Rated Power Consumption {W} + 0.9, !- Motor Efficiency + 0.0, !- Fraction of Motor Inefficiencies to Fluid Stream + Intermittent; !- Pump Control Type + + + + HeaderedPumps:VariableSpeed, + TowerWaterSys Pump, !- Name + TowerWaterSys Supply Inlet Node, !- Inlet Node Name + TowerWaterSys Pump-TowerWaterSys CoolTowerNodeviaConnector, !- Outlet Node Name + AUTOSIZE, !- Total Rated Flow Rate {m3/s} + 2, !- Number of Pumps in Bank + SEQUENTIAL, !- Flow Sequencing Control Scheme + 148556.6249, !- Rated Pump Head {Pa} !- Rated Pu + autosize, !- Rated Power Consumption {W} + 0.87, !- Motor Efficiency + 0.0, !- Fraction of Motor Inefficiencies to Fluid Stream + 0, !- Coefficient 1 of the Part Load Performance Curve + 0.0216, !- Coefficient 2 of the Part Load Performance Curve + -0.0325, !- Coefficient 3 of the Part Load Performance Curve + 1.0095, !- Coefficient 4 of the Part Load Performance Curve + 0, !- Minimum Flow Rate Fraction + Intermittent, !- Pump Control Type + ; !- Pump Flow Rate Schedule Name + +!- =========== ALL OBJECTS IN CLASS: COIL:WATER:COOLING =========== + + + Coil:Cooling:Water, + CAV_bas_CoolC, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- Design Water Flow Rate {m3/s} + AUTOSIZE, !- Design Air Flow Rate {m3/s} + AUTOSIZE, !- Design Inlet Water Temperature {C} + AUTOSIZE, !- Design Inlet Air Temperature {C} + AUTOSIZE, !- Design Outlet Air Temperature {C} + AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir} + AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir} + CAV_bas_CoolCDemand Inlet Node, !- Water Inlet Node Name + CAV_bas_CoolCDemand Outlet Node, !- Water Outlet Node Name + CAV_bas_OA-CAV_CoolCNode,!- Air Inlet Node Name + CAV_bas_CoolC-CAV_HeatCNode, !- Air Outlet Node Name + SimpleAnalysis, !- Type of Analysis + CrossFlow; !- Heat Exchanger Configuration + + + + Coil:Cooling:Water, + VAV_bot WITH REHEAT_CoolC, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- Design Water Flow Rate {m3/s} + AUTOSIZE, !- Design Air Flow Rate {m3/s} + AUTOSIZE, !- Design Inlet Water Temperature {C} + AUTOSIZE, !- Design Inlet Air Temperature {C} + AUTOSIZE, !- Design Outlet Air Temperature {C} + AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir} + AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir} + VAV_bot WITH REHEAT_CoolCDemand Inlet Node, !- Water Inlet Node Name + VAV_bot WITH REHEAT_CoolCDemand Outlet Node, !- Water Outlet Node Name + VAV_bot WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Air Inlet Node Name + VAV_bot WITH REHEAT_CoolC-VAV WITH REHEAT_HeatCNode, !- Air Outlet Node Name + SimpleAnalysis, !- Type of Analysis + CrossFlow; !- Heat Exchanger Configuration + + + + Coil:Cooling:Water, + VAV_mid WITH REHEAT_CoolC, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- Design Water Flow Rate {m3/s} + AUTOSIZE, !- Design Air Flow Rate {m3/s} + AUTOSIZE, !- Design Inlet Water Temperature {C} + AUTOSIZE, !- Design Inlet Air Temperature {C} + AUTOSIZE, !- Design Outlet Air Temperature {C} + AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir} + AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir} + VAV_mid WITH REHEAT_CoolCDemand Inlet Node, !- Water Inlet Node Name + VAV_mid WITH REHEAT_CoolCDemand Outlet Node, !- Water Outlet Node Name + VAV_mid WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Air Inlet Node Name + VAV_mid WITH REHEAT_CoolC-VAV WITH REHEAT_HeatCNode, !- Air Outlet Node Name + SimpleAnalysis, !- Type of Analysis + CrossFlow; !- Heat Exchanger Configuration + + + + Coil:Cooling:Water, + VAV_top WITH REHEAT_CoolC, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- Design Water Flow Rate {m3/s} + AUTOSIZE, !- Design Air Flow Rate {m3/s} + AUTOSIZE, !- Design Inlet Water Temperature {C} + AUTOSIZE, !- Design Inlet Air Temperature {C} + AUTOSIZE, !- Design Outlet Air Temperature {C} + AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir} + AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir} + VAV_top WITH REHEAT_CoolCDemand Inlet Node, !- Water Inlet Node Name + VAV_top WITH REHEAT_CoolCDemand Outlet Node, !- Water Outlet Node Name + VAV_top WITH REHEAT_OA-VAV WITH REHEAT_CoolCNode, !- Air Inlet Node Name + VAV_top WITH REHEAT_CoolC-VAV WITH REHEAT_HeatCNode, !- Air Outlet Node Name + SimpleAnalysis, !- Type of Analysis + CrossFlow; !- Heat Exchanger Configuration + +!- =========== ALL OBJECTS IN CLASS: COIL:WATER:SIMPLEHEATING =========== +! This hot water heating coil intends to capture the heat gains from the preheat coil + + + Coil:Heating:Water, + DataCenter_ExtraWaterHeatC, !- Name + DataCenter_ExtraWaterHeatC_Sch, !- Availability Schedule Name + , !- U-Factor Times Area Value {W/K} + , !- Maximum Water Flow Rate {m3/s} + DataCenter_ExtraWaterHeatCDemand Inlet Node, !- Water Inlet Node Name + DataCenter_ExtraWaterHeatCDemand Outlet Node, !- Water Outlet Node Name + DataCenter_ExtraElecHeatC-DataCenter_ExtraWaterHeatCNode, !- Air Inlet Node Name + AirLoop DataCenter Basement Supply Air Outlet, !- Air Outlet Node Name + NominalCapacity, !- Performance Input Method + 0, !- Rated Capacity {W} + 82.2, !- Rated Inlet Water Temperature {C} + 16.6, !- Rated Inlet Air Temperature {C} + 71.1, !- Rated Outlet Water Temperature {C} + 32.2, !- Rated Outlet Air Temperature {C} + 0.5; !- Rated Ratio for Air and Water Convection + +! This electric heating coil intends to capture the heat gains from the electric steam humidifier + + + Coil:Heating:Electric, + DataCenter_ExtraElecHeatC, !- Name + DataCenter_ExtraElecHeatC_Sch, !- Availability Schedule Name + 1.0000, !- Efficiency + 10000000, !- Nominal Capacity {W} + DataCenter_Humidifier-DataCenter_ExtraElecHeatCNode, !- Air Inlet Node Name + DataCenter_ExtraElecHeatC-DataCenter_ExtraWaterHeatCNode, !- Air Outlet Node Name + DataCenter_ExtraElecHeatC-DataCenter_ExtraWaterHeatCNode; !- Temperature Setpoint Node Name + + + + Coil:Heating:Water, + Core_bottom VAV Box Reheat Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- U-Factor Times Area Value {W/K} + AUTOSIZE, !- Maximum Water Flow Rate {m3/s} + Core_bottom VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name + Core_bottom VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name + Core_bottom VAV Box Damper Node, !- Air Inlet Node Name + Core_bottom VAV Box Outlet Node, !- Air Outlet Node Name + UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method + AUTOSIZE, !- Rated Capacity {W} + 82.2, !- Rated Inlet Water Temperature {C} + 12.8, !- Rated Inlet Air Temperature {C} + 71.1, !- Rated Outlet Water Temperature {C} + 40.0, !- Rated Outlet Air Temperature {C} + ; !- Rated Ratio for Air and Water Convection + + + + Coil:Heating:Water, + Core_mid VAV Box Reheat Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- U-Factor Times Area Value {W/K} + AUTOSIZE, !- Maximum Water Flow Rate {m3/s} + Core_mid VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name + Core_mid VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name + Core_mid VAV Box Damper Node, !- Air Inlet Node Name + Core_mid VAV Box Outlet Node, !- Air Outlet Node Name + UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method + AUTOSIZE, !- Rated Capacity {W} + 82.2, !- Rated Inlet Water Temperature {C} + 12.8, !- Rated Inlet Air Temperature {C} + 71.1, !- Rated Outlet Water Temperature {C} + 40.0, !- Rated Outlet Air Temperature {C} + ; !- Rated Ratio for Air and Water Convection + + + + Coil:Heating:Water, + Core_top VAV Box Reheat Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- U-Factor Times Area Value {W/K} + AUTOSIZE, !- Maximum Water Flow Rate {m3/s} + Core_top VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name + Core_top VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name + Core_top VAV Box Damper Node, !- Air Inlet Node Name + Core_top VAV Box Outlet Node, !- Air Outlet Node Name + UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method + AUTOSIZE, !- Rated Capacity {W} + 82.2, !- Rated Inlet Water Temperature {C} + 12.8, !- Rated Inlet Air Temperature {C} + 71.1, !- Rated Outlet Water Temperature {C} + 40.0, !- Rated Outlet Air Temperature {C} + ; !- Rated Ratio for Air and Water Convection + + + + Coil:Heating:Water, + Perimeter_bot_ZN_3 VAV Box Reheat Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- U-Factor Times Area Value {W/K} + AUTOSIZE, !- Maximum Water Flow Rate {m3/s} + Perimeter_bot_ZN_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name + Perimeter_bot_ZN_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name + Perimeter_bot_ZN_3 VAV Box Damper Node, !- Air Inlet Node Name + Perimeter_bot_ZN_3 VAV Box Outlet Node, !- Air Outlet Node Name + UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method + AUTOSIZE, !- Rated Capacity {W} + 82.2, !- Rated Inlet Water Temperature {C} + 12.8, !- Rated Inlet Air Temperature {C} + 71.1, !- Rated Outlet Water Temperature {C} + 40.0, !- Rated Outlet Air Temperature {C} + ; !- Rated Ratio for Air and Water Convection + + + + Coil:Heating:Water, + Perimeter_bot_ZN_2 VAV Box Reheat Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- U-Factor Times Area Value {W/K} + AUTOSIZE, !- Maximum Water Flow Rate {m3/s} + Perimeter_bot_ZN_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name + Perimeter_bot_ZN_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name + Perimeter_bot_ZN_2 VAV Box Damper Node, !- Air Inlet Node Name + Perimeter_bot_ZN_2 VAV Box Outlet Node, !- Air Outlet Node Name + UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method + AUTOSIZE, !- Rated Capacity {W} + 82.2, !- Rated Inlet Water Temperature {C} + 12.8, !- Rated Inlet Air Temperature {C} + 71.1, !- Rated Outlet Water Temperature {C} + 40.0, !- Rated Outlet Air Temperature {C} + ; !- Rated Ratio for Air and Water Convection + + + + Coil:Heating:Water, + Perimeter_bot_ZN_1 VAV Box Reheat Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- U-Factor Times Area Value {W/K} + AUTOSIZE, !- Maximum Water Flow Rate {m3/s} + Perimeter_bot_ZN_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name + Perimeter_bot_ZN_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name + Perimeter_bot_ZN_1 VAV Box Damper Node, !- Air Inlet Node Name + Perimeter_bot_ZN_1 VAV Box Outlet Node, !- Air Outlet Node Name + UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method + AUTOSIZE, !- Rated Capacity {W} + 82.2, !- Rated Inlet Water Temperature {C} + 12.8, !- Rated Inlet Air Temperature {C} + 71.1, !- Rated Outlet Water Temperature {C} + 40.0, !- Rated Outlet Air Temperature {C} + ; !- Rated Ratio for Air and Water Convection + + + + Coil:Heating:Water, + Perimeter_bot_ZN_4 VAV Box Reheat Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- U-Factor Times Area Value {W/K} + AUTOSIZE, !- Maximum Water Flow Rate {m3/s} + Perimeter_bot_ZN_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name + Perimeter_bot_ZN_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name + Perimeter_bot_ZN_4 VAV Box Damper Node, !- Air Inlet Node Name + Perimeter_bot_ZN_4 VAV Box Outlet Node, !- Air Outlet Node Name + UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method + AUTOSIZE, !- Rated Capacity {W} + 82.2, !- Rated Inlet Water Temperature {C} + 12.8, !- Rated Inlet Air Temperature {C} + 71.1, !- Rated Outlet Water Temperature {C} + 40.0, !- Rated Outlet Air Temperature {C} + ; !- Rated Ratio for Air and Water Convection + + + + Coil:Heating:Water, + Perimeter_mid_ZN_3 VAV Box Reheat Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- U-Factor Times Area Value {W/K} + AUTOSIZE, !- Maximum Water Flow Rate {m3/s} + Perimeter_mid_ZN_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name + Perimeter_mid_ZN_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name + Perimeter_mid_ZN_3 VAV Box Damper Node, !- Air Inlet Node Name + Perimeter_mid_ZN_3 VAV Box Outlet Node, !- Air Outlet Node Name + UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method + AUTOSIZE, !- Rated Capacity {W} + 82.2, !- Rated Inlet Water Temperature {C} + 12.8, !- Rated Inlet Air Temperature {C} + 71.1, !- Rated Outlet Water Temperature {C} + 40.0, !- Rated Outlet Air Temperature {C} + ; !- Rated Ratio for Air and Water Convection + + + + Coil:Heating:Water, + Perimeter_mid_ZN_2 VAV Box Reheat Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- U-Factor Times Area Value {W/K} + AUTOSIZE, !- Maximum Water Flow Rate {m3/s} + Perimeter_mid_ZN_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name + Perimeter_mid_ZN_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name + Perimeter_mid_ZN_2 VAV Box Damper Node, !- Air Inlet Node Name + Perimeter_mid_ZN_2 VAV Box Outlet Node, !- Air Outlet Node Name + UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method + AUTOSIZE, !- Rated Capacity {W} + 82.2, !- Rated Inlet Water Temperature {C} + 12.8, !- Rated Inlet Air Temperature {C} + 71.1, !- Rated Outlet Water Temperature {C} + 40.0, !- Rated Outlet Air Temperature {C} + ; !- Rated Ratio for Air and Water Convection + + + + Coil:Heating:Water, + Perimeter_mid_ZN_1 VAV Box Reheat Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- U-Factor Times Area Value {W/K} + AUTOSIZE, !- Maximum Water Flow Rate {m3/s} + Perimeter_mid_ZN_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name + Perimeter_mid_ZN_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name + Perimeter_mid_ZN_1 VAV Box Damper Node, !- Air Inlet Node Name + Perimeter_mid_ZN_1 VAV Box Outlet Node, !- Air Outlet Node Name + UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method + AUTOSIZE, !- Rated Capacity {W} + 82.2, !- Rated Inlet Water Temperature {C} + 12.8, !- Rated Inlet Air Temperature {C} + 71.1, !- Rated Outlet Water Temperature {C} + 40.0, !- Rated Outlet Air Temperature {C} + ; !- Rated Ratio for Air and Water Convection + + + + Coil:Heating:Water, + Perimeter_mid_ZN_4 VAV Box Reheat Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- U-Factor Times Area Value {W/K} + AUTOSIZE, !- Maximum Water Flow Rate {m3/s} + Perimeter_mid_ZN_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name + Perimeter_mid_ZN_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name + Perimeter_mid_ZN_4 VAV Box Damper Node, !- Air Inlet Node Name + Perimeter_mid_ZN_4 VAV Box Outlet Node, !- Air Outlet Node Name + UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method + AUTOSIZE, !- Rated Capacity {W} + 82.2, !- Rated Inlet Water Temperature {C} + 12.8, !- Rated Inlet Air Temperature {C} + 71.1, !- Rated Outlet Water Temperature {C} + 40.0, !- Rated Outlet Air Temperature {C} + ; !- Rated Ratio for Air and Water Convection + + + + Coil:Heating:Water, + Perimeter_top_ZN_3 VAV Box Reheat Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- U-Factor Times Area Value {W/K} + AUTOSIZE, !- Maximum Water Flow Rate {m3/s} + Perimeter_top_ZN_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name + Perimeter_top_ZN_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name + Perimeter_top_ZN_3 VAV Box Damper Node, !- Air Inlet Node Name + Perimeter_top_ZN_3 VAV Box Outlet Node, !- Air Outlet Node Name + UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method + AUTOSIZE, !- Rated Capacity {W} + 82.2, !- Rated Inlet Water Temperature {C} + 12.8, !- Rated Inlet Air Temperature {C} + 71.1, !- Rated Outlet Water Temperature {C} + 40.0, !- Rated Outlet Air Temperature {C} + ; !- Rated Ratio for Air and Water Convection + + + + Coil:Heating:Water, + Perimeter_top_ZN_2 VAV Box Reheat Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- U-Factor Times Area Value {W/K} + AUTOSIZE, !- Maximum Water Flow Rate {m3/s} + Perimeter_top_ZN_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name + Perimeter_top_ZN_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name + Perimeter_top_ZN_2 VAV Box Damper Node, !- Air Inlet Node Name + Perimeter_top_ZN_2 VAV Box Outlet Node, !- Air Outlet Node Name + UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method + AUTOSIZE, !- Rated Capacity {W} + 82.2, !- Rated Inlet Water Temperature {C} + 12.8, !- Rated Inlet Air Temperature {C} + 71.1, !- Rated Outlet Water Temperature {C} + 40.0, !- Rated Outlet Air Temperature {C} + ; !- Rated Ratio for Air and Water Convection + + + + Coil:Heating:Water, + Perimeter_top_ZN_1 VAV Box Reheat Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- U-Factor Times Area Value {W/K} + AUTOSIZE, !- Maximum Water Flow Rate {m3/s} + Perimeter_top_ZN_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name + Perimeter_top_ZN_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name + Perimeter_top_ZN_1 VAV Box Damper Node, !- Air Inlet Node Name + Perimeter_top_ZN_1 VAV Box Outlet Node, !- Air Outlet Node Name + UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method + AUTOSIZE, !- Rated Capacity {W} + 82.2, !- Rated Inlet Water Temperature {C} + 12.8, !- Rated Inlet Air Temperature {C} + 71.1, !- Rated Outlet Water Temperature {C} + 40.0, !- Rated Outlet Air Temperature {C} + ; !- Rated Ratio for Air and Water Convection + + + + Coil:Heating:Water, + Perimeter_top_ZN_4 VAV Box Reheat Coil, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- U-Factor Times Area Value {W/K} + AUTOSIZE, !- Maximum Water Flow Rate {m3/s} + Perimeter_top_ZN_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name + Perimeter_top_ZN_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name + Perimeter_top_ZN_4 VAV Box Damper Node, !- Air Inlet Node Name + Perimeter_top_ZN_4 VAV Box Outlet Node, !- Air Outlet Node Name + UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method + AUTOSIZE, !- Rated Capacity {W} + 82.2, !- Rated Inlet Water Temperature {C} + 12.8, !- Rated Inlet Air Temperature {C} + 71.1, !- Rated Outlet Water Temperature {C} + 40.0, !- Rated Outlet Air Temperature {C} + ; !- Rated Ratio for Air and Water Convection + + + + Coil:Heating:Water, + CAV_bas_HeatC, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- U-Factor Times Area Value {W/K} + AUTOSIZE, !- Maximum Water Flow Rate {m3/s} + CAV_bas_HeatCDemand Inlet Node, !- Water Inlet Node Name + CAV_bas_HeatCDemand Outlet Node, !- Water Outlet Node Name + CAV_bas_CoolC-CAV_HeatCNode, !- Air Inlet Node Name + CAV_bas_HeatC-CAV_FanNode, !- Air Outlet Node Name + UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method + AUTOSIZE, !- Rated Capacity {W} + 82.2, !- Rated Inlet Water Temperature {C} + 12.8, !- Rated Inlet Air Temperature {C} + 71.1, !- Rated Outlet Water Temperature {C} + 40.0, !- Rated Outlet Air Temperature {C} + ; !- Rated Ratio for Air and Water Convection + + + + Coil:Heating:Water, + VAV_bot WITH REHEAT_HeatC, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- U-Factor Times Area Value {W/K} + AUTOSIZE, !- Maximum Water Flow Rate {m3/s} + VAV_bot WITH REHEAT_HeatCDemand Inlet Node, !- Water Inlet Node Name + VAV_bot WITH REHEAT_HeatCDemand Outlet Node, !- Water Outlet Node Name + VAV_bot WITH REHEAT_CoolC-VAV WITH REHEAT_HeatCNode, !- Air Inlet Node Name + VAV_bot WITH REHEAT_HeatC-VAV WITH REHEAT FanNode, !- Air Outlet Node Name + UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method + AUTOSIZE, !- Rated Capacity {W} + 82.2, !- Rated Inlet Water Temperature {C} + 12.8, !- Rated Inlet Air Temperature {C} + 71.1, !- Rated Outlet Water Temperature {C} + 40.0, !- Rated Outlet Air Temperature {C} + ; !- Rated Ratio for Air and Water Convection + + + + Coil:Heating:Water, + VAV_mid WITH REHEAT_HeatC, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- U-Factor Times Area Value {W/K} + AUTOSIZE, !- Maximum Water Flow Rate {m3/s} + VAV_mid WITH REHEAT_HeatCDemand Inlet Node, !- Water Inlet Node Name + VAV_mid WITH REHEAT_HeatCDemand Outlet Node, !- Water Outlet Node Name + VAV_mid WITH REHEAT_CoolC-VAV WITH REHEAT_HeatCNode, !- Air Inlet Node Name + VAV_mid WITH REHEAT_HeatC-VAV WITH REHEAT FanNode, !- Air Outlet Node Name + UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method + AUTOSIZE, !- Rated Capacity {W} + 82.2, !- Rated Inlet Water Temperature {C} + 12.8, !- Rated Inlet Air Temperature {C} + 71.1, !- Rated Outlet Water Temperature {C} + 40.0, !- Rated Outlet Air Temperature {C} + ; !- Rated Ratio for Air and Water Convection + + + + Coil:Heating:Water, + VAV_top WITH REHEAT_HeatC, !- Name + ALWAYS_ON, !- Availability Schedule Name + AUTOSIZE, !- U-Factor Times Area Value {W/K} + AUTOSIZE, !- Maximum Water Flow Rate {m3/s} + VAV_top WITH REHEAT_HeatCDemand Inlet Node, !- Water Inlet Node Name + VAV_top WITH REHEAT_HeatCDemand Outlet Node, !- Water Outlet Node Name + VAV_top WITH REHEAT_CoolC-VAV WITH REHEAT_HeatCNode, !- Air Inlet Node Name + VAV_top WITH REHEAT_HeatC-VAV WITH REHEAT FanNode, !- Air Outlet Node Name + UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method + AUTOSIZE, !- Rated Capacity {W} + 82.2, !- Rated Inlet Water Temperature {C} + 12.8, !- Rated Inlet Air Temperature {C} + 71.1, !- Rated Outlet Water Temperature {C} + 40.0, !- Rated Outlet Air Temperature {C} + ; !- Rated Ratio for Air and Water Convection + +!- =========== ALL OBJECTS IN CLASS: COIL:HEATING:ELECTRIC =========== + + + Coil:Heating:Electric, + Heat Pump DX Supp Heating Coil AirLoop DataCenter Basement, !- Name + ALWAYS_OFF, !- Availability Schedule Name + 1, !- Efficiency + autosize, !- Nominal Capacity {W} + Heating Coil Air Outlet Node AirLoop DataCenter Basement, !- Air Inlet Node Name + AirLoop DataCenter Basement Humidifier Inlet; !- Air Outlet Node Name + + + + Coil:Heating:Electric, + Heat Pump DX Supp Heating Coil AirLoop DataCenter bot, !- Name + ALWAYS_OFF, !- Availability Schedule Name + 1, !- Efficiency + autosize, !- Nominal Capacity {W} + Heating Coil Air Outlet Node AirLoop DataCenter bot, !- Air Inlet Node Name + AirLoop DataCenter bot Supply Air Outlet; !- Air Outlet Node Name + + + + Coil:Heating:Electric, + Heat Pump DX Supp Heating Coil AirLoop DataCenter mid, !- Name + ALWAYS_OFF, !- Availability Schedule Name + 1, !- Efficiency + autosize, !- Nominal Capacity {W} + Heating Coil Air Outlet Node AirLoop DataCenter mid, !- Air Inlet Node Name + AirLoop DataCenter mid Supply Air Outlet; !- Air Outlet Node Name + + + + Coil:Heating:Electric, + Heat Pump DX Supp Heating Coil AirLoop DataCenter top, !- Name + ALWAYS_OFF, !- Availability Schedule Name + 1, !- Efficiency + autosize, !- Nominal Capacity {W} + Heating Coil Air Outlet Node AirLoop DataCenter top, !- Air Inlet Node Name + AirLoop DataCenter top Supply Air Outlet; !- Air Outlet Node Name + +!- =========== ALL OBJECTS IN CLASS: COIL:COOLING:WATERTOAIRHEATPUMP:EQUATIONFIT =========== + + + Coil:Cooling:WaterToAirHeatPump:EquationFit, + Heat Pump Cooling Mode AirLoop DataCenter Basement, !- Name + AirLoop DataCenter Basement Water to Air Heat Pump Source Side1 Inlet Node, !- Water Inlet Node Name + AirLoop DataCenter Basement Water to Air Heat Pump Source Side1 Outlet Node, !- Water Outlet Node Name + AirLoop DataCenter Basement Supply Fan Outlet, !- Air Inlet Node Name + Cooling Coil Air Outlet Node AirLoop DataCenter Basement, !- Air Outlet Node Name + autosize, !- Rated Air Flow Rate {m3/s} + autosize, !- Rated Water Flow Rate {m3/s} + autosize, !- Rated Total Cooling Capacity {W} + autosize, !- Rated Sensible Cooling Capacity {W} +3.42592493940282, !- Rated Cooling Coefficient of Performance + -4.30266987344639, !- Total Cooling Capacity Coefficient 1 + 7.18536990534372, !- Total Cooling Capacity Coefficient 2 + -2.23946714486189, !- Total Cooling Capacity Coefficient 3 + 0.139995928440879, !- Total Cooling Capacity Coefficient 4 + 0.102660179888915, !- Total Cooling Capacity Coefficient 5 + 6.0019444814887, !- Sensible Cooling Capacity Coefficient 1 + 22.6300677244073, !- Sensible Cooling Capacity Coefficient 2 + -26.7960783730934, !- Sensible Cooling Capacity Coefficient 3 + -1.72374720346819, !- Sensible Cooling Capacity Coefficient 4 + 0.490644802367817, !- Sensible Cooling Capacity Coefficient 5 + 0.0693119353468141, !- Sensible Cooling Capacity Coefficient 6 + -5.67775976415698, !- Cooling Power Consumption Coefficient 1 + 0.438988156976704, !- Cooling Power Consumption Coefficient 2 + 5.845277342193, !- Cooling Power Consumption Coefficient 3 + 0.141605667000125, !- Cooling Power Consumption Coefficient 4 + -0.168727936032429, !- Cooling Power Consumption Coefficient 5 + 0, !- Nominal Time for Condensate Removal to Begin {s} + 0; !- Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless} + + + + Coil:Cooling:WaterToAirHeatPump:EquationFit, + Heat Pump Cooling Mode AirLoop DataCenter bot, !- Name + AirLoop DataCenter bot Water to Air Heat Pump Source Side1 Inlet Node, !- Water Inlet Node Name + AirLoop DataCenter bot Water to Air Heat Pump Source Side1 Outlet Node, !- Water Outlet Node Name + AirLoop DataCenter bot Supply Fan Outlet, !- Air Inlet Node Name + Cooling Coil Air Outlet Node AirLoop DataCenter bot, !- Air Outlet Node Name + autosize, !- Rated Air Flow Rate {m3/s} + autosize, !- Rated Water Flow Rate {m3/s} + autosize, !- Rated Total Cooling Capacity {W} + autosize, !- Rated Sensible Cooling Capacity {W} +3.70227472498202, !- Rated Cooling Coefficient of Performance + -4.30266987344639, !- Total Cooling Capacity Coefficient 1 + 7.18536990534372, !- Total Cooling Capacity Coefficient 2 + -2.23946714486189, !- Total Cooling Capacity Coefficient 3 + 0.139995928440879, !- Total Cooling Capacity Coefficient 4 + 0.102660179888915, !- Total Cooling Capacity Coefficient 5 + 6.0019444814887, !- Sensible Cooling Capacity Coefficient 1 + 22.6300677244073, !- Sensible Cooling Capacity Coefficient 2 + -26.7960783730934, !- Sensible Cooling Capacity Coefficient 3 + -1.72374720346819, !- Sensible Cooling Capacity Coefficient 4 + 0.490644802367817, !- Sensible Cooling Capacity Coefficient 5 + 0.0693119353468141, !- Sensible Cooling Capacity Coefficient 6 + -5.67775976415698, !- Cooling Power Consumption Coefficient 1 + 0.438988156976704, !- Cooling Power Consumption Coefficient 2 + 5.845277342193, !- Cooling Power Consumption Coefficient 3 + 0.141605667000125, !- Cooling Power Consumption Coefficient 4 + -0.168727936032429, !- Cooling Power Consumption Coefficient 5 + 0, !- Nominal Time for Condensate Removal to Begin {s} + 0; !- Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless} + + + + Coil:Cooling:WaterToAirHeatPump:EquationFit, + Heat Pump Cooling Mode AirLoop DataCenter mid, !- Name + AirLoop DataCenter mid Water to Air Heat Pump Source Side1 Inlet Node, !- Water Inlet Node Name + AirLoop DataCenter mid Water to Air Heat Pump Source Side1 Outlet Node, !- Water Outlet Node Name + AirLoop DataCenter mid Supply Fan Outlet, !- Air Inlet Node Name + Cooling Coil Air Outlet Node AirLoop DataCenter mid, !- Air Outlet Node Name + autosize, !- Rated Air Flow Rate {m3/s} + autosize, !- Rated Water Flow Rate {m3/s} + autosize, !- Rated Total Cooling Capacity {W} + autosize, !- Rated Sensible Cooling Capacity {W} +3.42592493940282, !- Rated Cooling Coefficient of Performance + -4.30266987344639, !- Total Cooling Capacity Coefficient 1 + 7.18536990534372, !- Total Cooling Capacity Coefficient 2 + -2.23946714486189, !- Total Cooling Capacity Coefficient 3 + 0.139995928440879, !- Total Cooling Capacity Coefficient 4 + 0.102660179888915, !- Total Cooling Capacity Coefficient 5 + 6.0019444814887, !- Sensible Cooling Capacity Coefficient 1 + 22.6300677244073, !- Sensible Cooling Capacity Coefficient 2 + -26.7960783730934, !- Sensible Cooling Capacity Coefficient 3 + -1.72374720346819, !- Sensible Cooling Capacity Coefficient 4 + 0.490644802367817, !- Sensible Cooling Capacity Coefficient 5 + 0.0693119353468141, !- Sensible Cooling Capacity Coefficient 6 + -5.67775976415698, !- Cooling Power Consumption Coefficient 1 + 0.438988156976704, !- Cooling Power Consumption Coefficient 2 + 5.845277342193, !- Cooling Power Consumption Coefficient 3 + 0.141605667000125, !- Cooling Power Consumption Coefficient 4 + -0.168727936032429, !- Cooling Power Consumption Coefficient 5 + 0, !- Nominal Time for Condensate Removal to Begin {s} + 0; !- Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless} + + + + Coil:Cooling:WaterToAirHeatPump:EquationFit, + Heat Pump Cooling Mode AirLoop DataCenter top, !- Name + AirLoop DataCenter top Water to Air Heat Pump Source Side1 Inlet Node, !- Water Inlet Node Name + AirLoop DataCenter top Water to Air Heat Pump Source Side1 Outlet Node, !- Water Outlet Node Name + AirLoop DataCenter top Supply Fan Outlet, !- Air Inlet Node Name + Cooling Coil Air Outlet Node AirLoop DataCenter top, !- Air Outlet Node Name + autosize, !- Rated Air Flow Rate {m3/s} + autosize, !- Rated Water Flow Rate {m3/s} + autosize, !- Rated Total Cooling Capacity {W} + autosize, !- Rated Sensible Cooling Capacity {W} +3.70227472498202, !- Rated Cooling Coefficient of Performance + -4.30266987344639, !- Total Cooling Capacity Coefficient 1 + 7.18536990534372, !- Total Cooling Capacity Coefficient 2 + -2.23946714486189, !- Total Cooling Capacity Coefficient 3 + 0.139995928440879, !- Total Cooling Capacity Coefficient 4 + 0.102660179888915, !- Total Cooling Capacity Coefficient 5 + 6.0019444814887, !- Sensible Cooling Capacity Coefficient 1 + 22.6300677244073, !- Sensible Cooling Capacity Coefficient 2 + -26.7960783730934, !- Sensible Cooling Capacity Coefficient 3 + -1.72374720346819, !- Sensible Cooling Capacity Coefficient 4 + 0.490644802367817, !- Sensible Cooling Capacity Coefficient 5 + 0.0693119353468141, !- Sensible Cooling Capacity Coefficient 6 + -5.67775976415698, !- Cooling Power Consumption Coefficient 1 + 0.438988156976704, !- Cooling Power Consumption Coefficient 2 + 5.845277342193, !- Cooling Power Consumption Coefficient 3 + 0.141605667000125, !- Cooling Power Consumption Coefficient 4 + -0.168727936032429, !- Cooling Power Consumption Coefficient 5 + 0, !- Nominal Time for Condensate Removal to Begin {s} + 0; !- Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless} + +!- =========== ALL OBJECTS IN CLASS: COIL:HEATING:WATERTOAIRHEATPUMP:EQUATIONFIT =========== + + + Coil:Heating:WaterToAirHeatPump:EquationFit, + Heat Pump HEATING Mode AirLoop DataCenter Basement, !- Name + AirLoop DataCenter Basement Water to Air Heat Pump Source Side2 Inlet Node, !- Water Inlet Node Name + AirLoop DataCenter Basement Water to Air Heat Pump Source Side2 Outlet Node, !- Water Outlet Node Name + Cooling Coil Air Outlet Node AirLoop DataCenter Basement, !- Air Inlet Node Name + Heating Coil Air Outlet Node AirLoop DataCenter Basement, !- Air Outlet Node Name + autosize, !- Rated Air Flow Rate {m3/s} + autosize, !- Rated Water Flow Rate {m3/s} + autosize, !- Rated Heating Capacity {W} +4.3, !- Rated Heating Coefficient of Performance + 0.237847462869254, !- Heating Capacity Coefficient 1 + -3.35823796081626, !- Heating Capacity Coefficient 2 + 3.80640467406376, !- Heating Capacity Coefficient 3 + 0.179200417311554, !- Heating Capacity Coefficient 4 + 0.12860719846082, !- Heating Capacity Coefficient 5 + -3.79175529243238, !- Heating Power Consumption Coefficient 1 + 3.38799239505527, !- Heating Power Consumption Coefficient 2 + 1.5022612076303, !- Heating Power Consumption Coefficient 3 + -0.177653510577989, !- Heating Power Consumption Coefficient 4 + -0.103079864171839; !- Heating Power Consumption Coefficient 5 + + + + Coil:Heating:WaterToAirHeatPump:EquationFit, + Heat Pump HEATING Mode AirLoop DataCenter bot, !- Name + AirLoop DataCenter bot Water to Air Heat Pump Source Side2 Inlet Node, !- Water Inlet Node Name + AirLoop DataCenter bot Water to Air Heat Pump Source Side2 Outlet Node, !- Water Outlet Node Name + Cooling Coil Air Outlet Node AirLoop DataCenter bot, !- Air Inlet Node Name + Heating Coil Air Outlet Node AirLoop DataCenter bot, !- Air Outlet Node Name + autosize, !- Rated Air Flow Rate {m3/s} + autosize, !- Rated Water Flow Rate {m3/s} + autosize, !- Rated Heating Capacity {W} +4.3, !- Rated Heating Coefficient of Performance + 0.237847462869254, !- Heating Capacity Coefficient 1 + -3.35823796081626, !- Heating Capacity Coefficient 2 + 3.80640467406376, !- Heating Capacity Coefficient 3 + 0.179200417311554, !- Heating Capacity Coefficient 4 + 0.12860719846082, !- Heating Capacity Coefficient 5 + -3.79175529243238, !- Heating Power Consumption Coefficient 1 + 3.38799239505527, !- Heating Power Consumption Coefficient 2 + 1.5022612076303, !- Heating Power Consumption Coefficient 3 + -0.177653510577989, !- Heating Power Consumption Coefficient 4 + -0.103079864171839; !- Heating Power Consumption Coefficient 5 + + + + Coil:Heating:WaterToAirHeatPump:EquationFit, + Heat Pump HEATING Mode AirLoop DataCenter mid, !- Name + AirLoop DataCenter mid Water to Air Heat Pump Source Side2 Inlet Node, !- Water Inlet Node Name + AirLoop DataCenter mid Water to Air Heat Pump Source Side2 Outlet Node, !- Water Outlet Node Name + Cooling Coil Air Outlet Node AirLoop DataCenter mid, !- Air Inlet Node Name + Heating Coil Air Outlet Node AirLoop DataCenter mid, !- Air Outlet Node Name + autosize, !- Rated Air Flow Rate {m3/s} + autosize, !- Rated Water Flow Rate {m3/s} + autosize, !- Rated Heating Capacity {W} +4.3, !- Rated Heating Coefficient of Performance + 0.237847462869254, !- Heating Capacity Coefficient 1 + -3.35823796081626, !- Heating Capacity Coefficient 2 + 3.80640467406376, !- Heating Capacity Coefficient 3 + 0.179200417311554, !- Heating Capacity Coefficient 4 + 0.12860719846082, !- Heating Capacity Coefficient 5 + -3.79175529243238, !- Heating Power Consumption Coefficient 1 + 3.38799239505527, !- Heating Power Consumption Coefficient 2 + 1.5022612076303, !- Heating Power Consumption Coefficient 3 + -0.177653510577989, !- Heating Power Consumption Coefficient 4 + -0.103079864171839; !- Heating Power Consumption Coefficient 5 + + + + Coil:Heating:WaterToAirHeatPump:EquationFit, + Heat Pump HEATING Mode AirLoop DataCenter top, !- Name + AirLoop DataCenter top Water to Air Heat Pump Source Side2 Inlet Node, !- Water Inlet Node Name + AirLoop DataCenter top Water to Air Heat Pump Source Side2 Outlet Node, !- Water Outlet Node Name + Cooling Coil Air Outlet Node AirLoop DataCenter top, !- Air Inlet Node Name + Heating Coil Air Outlet Node AirLoop DataCenter top, !- Air Outlet Node Name + autosize, !- Rated Air Flow Rate {m3/s} + autosize, !- Rated Water Flow Rate {m3/s} + autosize, !- Rated Heating Capacity {W} +4.3, !- Rated Heating Coefficient of Performance + 0.237847462869254, !- Heating Capacity Coefficient 1 + -3.35823796081626, !- Heating Capacity Coefficient 2 + 3.80640467406376, !- Heating Capacity Coefficient 3 + 0.179200417311554, !- Heating Capacity Coefficient 4 + 0.12860719846082, !- Heating Capacity Coefficient 5 + -3.79175529243238, !- Heating Power Consumption Coefficient 1 + 3.38799239505527, !- Heating Power Consumption Coefficient 2 + 1.5022612076303, !- Heating Power Consumption Coefficient 3 + -0.177653510577989, !- Heating Power Consumption Coefficient 4 + -0.103079864171839; !- Heating Power Consumption Coefficient 5 + +!- =========== ALL OBJECTS IN CLASS: HUMIDIFIER:STEAM:ELECTRIC =========== + + + Humidifier:Steam:Electric, + DataCenter Basement Humidifier, !- Name + ALWAYS_ON, !- Availability Schedule Name + 3.72E-5, !- Rated Capacity {m3/s} + 100000, !- Rated Power {W} + 0, !- Rated Fan Power {W} + 0, !- Standby Power {W} + AirLoop DataCenter Basement Humidifier Inlet, !- Air Inlet Node Name + DataCenter_Humidifier-DataCenter_ExtraElecHeatCNode; !- Air Outlet Node Name + +!- =========== ALL OBJECTS IN CLASS: AIRLOOPHVAC:UNITARYHEATPUMP:WATERTOAIR =========== + + + + AirLoopHVAC:UnitaryHeatPump:WaterToAir, + AirLoop DataCenter Basement DXAC Heat Pump, !- Name + Always_On, !- Availability Schedule Name + DataCenter Basement Mixed Air Outlet, !- Air Inlet Node Name + AirLoop DataCenter Basement Humidifier Inlet, !- Air Outlet Node Name + autosize, !- Supply Air Flow Rate {m3/s} + DataCenter_basement_ZN_6,!- Controlling Zone or Thermostat Location + Fan:OnOff, !- Supply Air Fan Object Type + DataCenter Basement Supply Fan, !- Supply Air Fan Name + Coil:Heating:WaterToAirHeatPump:EquationFit, !- Heating Coil Object Type + Heat Pump HEATING Mode AirLoop DataCenter Basement, !- Heating Coil Name + 0.001, !- Heating Convergence + Coil:Cooling:WaterToAirHeatPump:EquationFit, !- Cooling Coil Object Type + Heat Pump Cooling Mode AirLoop DataCenter Basement, !- Cooling Coil Name + 0.001, !- Cooling Convergence + 2.5, !- Maximum Cycling Rate {cycles/hr} + 60, !- Heat Pump Time Constant {s} + 0.01, !- Fraction of On-Cycle Power Use + 60, !- Heat Pump Fan Delay Time {s} + Coil:Heating:Electric, !- Supplemental Heating Coil Object Type + Heat Pump DX Supp Heating Coil AirLoop DataCenter Basement, !- Supplemental Heating Coil Name + 50, !- Maximum Supply Air Temperature from Supplemental Heater {C} + , !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C} + Common OSA Inlet Node, !- Outdoor Dry-Bulb Temperature Sensor Node Name + BlowThrough, !- Fan Placement + SupplyFanSch; !- Supply Air Fan Operating Mode Schedule Name + + + + AirLoopHVAC:UnitaryHeatPump:WaterToAir, + AirLoop DataCenter bot DXAC Heat Pump, !- Name + Always_On, !- Availability Schedule Name + DataCenter bot Mixed Air Outlet, !- Air Inlet Node Name + AirLoop DataCenter bot Supply Air Outlet, !- Air Outlet Node Name + autosize, !- Supply Air Flow Rate {m3/s} + DataCenter_bot_ZN_6, !- Controlling Zone or Thermostat Location + Fan:OnOff, !- Supply Air Fan Object Type + DataCenter bot Supply Fan, !- Supply Air Fan Name + Coil:Heating:WaterToAirHeatPump:EquationFit, !- Heating Coil Object Type + Heat Pump HEATING Mode AirLoop DataCenter bot, !- Heating Coil Name + 0.001, !- Heating Convergence + Coil:Cooling:WaterToAirHeatPump:EquationFit, !- Cooling Coil Object Type + Heat Pump Cooling Mode AirLoop DataCenter bot, !- Cooling Coil Name + 0.001, !- Cooling Convergence + 2.5, !- Maximum Cycling Rate {cycles/hr} + 60, !- Heat Pump Time Constant {s} + 0.01, !- Fraction of On-Cycle Power Use + 60, !- Heat Pump Fan Delay Time {s} + Coil:Heating:Electric, !- Supplemental Heating Coil Object Type + Heat Pump DX Supp Heating Coil AirLoop DataCenter bot, !- Supplemental Heating Coil Name + 50, !- Maximum Supply Air Temperature from Supplemental Heater {C} + , !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C} + Common OSA Inlet Node, !- Outdoor Dry-Bulb Temperature Sensor Node Name + BlowThrough, !- Fan Placement + SupplyFanSch; !- Supply Air Fan Operating Mode Schedule Name + + + + AirLoopHVAC:UnitaryHeatPump:WaterToAir, + AirLoop DataCenter mid DXAC Heat Pump, !- Name + Always_On, !- Availability Schedule Name + DataCenter mid Mixed Air Outlet, !- Air Inlet Node Name + AirLoop DataCenter mid Supply Air Outlet, !- Air Outlet Node Name + autosize, !- Supply Air Flow Rate {m3/s} + DataCenter_mid_ZN_6, !- Controlling Zone or Thermostat Location + Fan:OnOff, !- Supply Air Fan Object Type + DataCenter mid Supply Fan, !- Supply Air Fan Name + Coil:Heating:WaterToAirHeatPump:EquationFit, !- Heating Coil Object Type + Heat Pump HEATING Mode AirLoop DataCenter mid, !- Heating Coil Name + 0.001, !- Heating Convergence + Coil:Cooling:WaterToAirHeatPump:EquationFit, !- Cooling Coil Object Type + Heat Pump Cooling Mode AirLoop DataCenter mid, !- Cooling Coil Name + 0.001, !- Cooling Convergence + 2.5, !- Maximum Cycling Rate {cycles/hr} + 60, !- Heat Pump Time Constant {s} + 0.01, !- Fraction of On-Cycle Power Use + 60, !- Heat Pump Fan Delay Time {s} + Coil:Heating:Electric, !- Supplemental Heating Coil Object Type + Heat Pump DX Supp Heating Coil AirLoop DataCenter mid, !- Supplemental Heating Coil Name + 50, !- Maximum Supply Air Temperature from Supplemental Heater {C} + , !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C} + Common OSA Inlet Node, !- Outdoor Dry-Bulb Temperature Sensor Node Name + BlowThrough, !- Fan Placement + SupplyFanSch; !- Supply Air Fan Operating Mode Schedule Name + + + + AirLoopHVAC:UnitaryHeatPump:WaterToAir, + AirLoop DataCenter top DXAC Heat Pump, !- Name + Always_On, !- Availability Schedule Name + DataCenter top Mixed Air Outlet, !- Air Inlet Node Name + AirLoop DataCenter top Supply Air Outlet, !- Air Outlet Node Name + autosize, !- Supply Air Flow Rate {m3/s} + DataCenter_top_ZN_6, !- Controlling Zone or Thermostat Location + Fan:OnOff, !- Supply Air Fan Object Type + DataCenter top Supply Fan, !- Supply Air Fan Name + Coil:Heating:WaterToAirHeatPump:EquationFit, !- Heating Coil Object Type + Heat Pump HEATING Mode AirLoop DataCenter top, !- Heating Coil Name + 0.001, !- Heating Convergence + Coil:Cooling:WaterToAirHeatPump:EquationFit, !- Cooling Coil Object Type + Heat Pump Cooling Mode AirLoop DataCenter top, !- Cooling Coil Name + 0.001, !- Cooling Convergence + 2.5, !- Maximum Cycling Rate {cycles/hr} + 60, !- Heat Pump Time Constant {s} + 0.01, !- Fraction of On-Cycle Power Use + 60, !- Heat Pump Fan Delay Time {s} + Coil:Heating:Electric, !- Supplemental Heating Coil Object Type + Heat Pump DX Supp Heating Coil AirLoop DataCenter top, !- Supplemental Heating Coil Name + 50, !- Maximum Supply Air Temperature from Supplemental Heater {C} + , !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C} + Common OSA Inlet Node, !- Outdoor Dry-Bulb Temperature Sensor Node Name + BlowThrough, !- Fan Placement + SupplyFanSch; !- Supply Air Fan Operating Mode Schedule Name + +!- =========== ALL OBJECTS IN CLASS: FAN:CONSTANTVOLUME =========== + + + Fan:ConstantVolume, + CAV_bas Fan, !- Name + HVACOperationSchd, !- Availability Schedule Name +0.59605, !- Fan Efficiency +1018.41, !- Pressure Rise {Pa} + AUTOSIZE, !- Maximum Flow Rate {m3/s} +0.917, !- Motor Efficiency + 1.0, !- Motor In Airstream Fraction + CAV_bas_HeatC-CAV_FanNode, !- Air Inlet Node Name + CAV_bas Supply Equipment Outlet Node; !- Air Outlet Node Name + +!- =========== ALL OBJECTS IN CLASS: FAN:SIMPLE:VARIABLEVOLUME =========== + + + Fan:VariableVolume, + VAV_bot WITH REHEAT Fan, !- Name + HVACOperationSchd, !- Availability Schedule Name +0.6084, !- Fan Efficiency +1389.42, !- Pressure Rise {Pa} + AUTOSIZE, !- Maximum Flow Rate {m3/s} + Fraction, !- Fan Power Minimum Flow Rate Input Method + 0.25, !- Fan Power Minimum Flow Fraction + , !- Fan Power Minimum Air Flow Rate {m3/s} +0.936, !- Motor Efficiency + 1.0, !- Motor In Airstream Fraction +0.0408, !- Fan Power Coefficient 1 +0.088, !- Fan Power Coefficient 2 +-0.0729, !- Fan Power Coefficient 3 +0.9437, !- Fan Power Coefficient 4 +0, !- Fan Power Coefficient 5 + VAV_bot WITH REHEAT_HeatC-VAV WITH REHEAT FanNode, !- Air Inlet Node Name + VAV_bot WITH REHEAT Supply Equipment Outlet Node; !- Air Outlet Node Name + + + + Fan:VariableVolume, + VAV_mid WITH REHEAT Fan, !- Name + HVACOperationSchd, !- Availability Schedule Name +0.6084, !- Fan Efficiency +1389.42, !- Pressure Rise {Pa} + AUTOSIZE, !- Maximum Flow Rate {m3/s} + Fraction, !- Fan Power Minimum Flow Rate Input Method + 0.25, !- Fan Power Minimum Flow Fraction + , !- Fan Power Minimum Air Flow Rate {m3/s} +0.936, !- Motor Efficiency + 1.0, !- Motor In Airstream Fraction +0.0408, !- Fan Power Coefficient 1 +0.088, !- Fan Power Coefficient 2 +-0.0729, !- Fan Power Coefficient 3 +0.9437, !- Fan Power Coefficient 4 +0, !- Fan Power Coefficient 5 + VAV_mid WITH REHEAT_HeatC-VAV WITH REHEAT FanNode, !- Air Inlet Node Name + VAV_mid WITH REHEAT Supply Equipment Outlet Node; !- Air Outlet Node Name + + + + Fan:VariableVolume, + VAV_top WITH REHEAT Fan, !- Name + HVACOperationSchd, !- Availability Schedule Name +0.6084, !- Fan Efficiency +1389.42, !- Pressure Rise {Pa} + AUTOSIZE, !- Maximum Flow Rate {m3/s} + Fraction, !- Fan Power Minimum Flow Rate Input Method + 0.25, !- Fan Power Minimum Flow Fraction + , !- Fan Power Minimum Air Flow Rate {m3/s} +0.936, !- Motor Efficiency + 1.0, !- Motor In Airstream Fraction +0.0408, !- Fan Power Coefficient 1 +0.088, !- Fan Power Coefficient 2 +-0.0729, !- Fan Power Coefficient 3 +0.9437, !- Fan Power Coefficient 4 +0, !- Fan Power Coefficient 5 + VAV_top WITH REHEAT_HeatC-VAV WITH REHEAT FanNode, !- Air Inlet Node Name + VAV_top WITH REHEAT Supply Equipment Outlet Node; !- Air Outlet Node Name + +!- =========== ALL OBJECTS IN CLASS: FAN:ONOFF =========== + + + Fan:OnOff, + DataCenter Basement Supply Fan, !- Name + Always_On, !- Availability Schedule Name +0.6175, !- Fan Efficiency +1018.41, !- Pressure Rise {Pa} + autosize, !- Maximum Flow Rate {m3/s} +0.95, !- Motor Efficiency + 1, !- Motor In Airstream Fraction + DataCenter Basement Mixed Air Outlet, !- Air Inlet Node Name + AirLoop DataCenter Basement Supply Fan Outlet; !- Air Outlet Node Name + + + + Fan:OnOff, + DataCenter bot Supply Fan, !- Name + Always_On, !- Availability Schedule Name +0.55575, !- Fan Efficiency +622.5, !- Pressure Rise {Pa} + autosize, !- Maximum Flow Rate {m3/s} +0.855, !- Motor Efficiency + 1, !- Motor In Airstream Fraction + DataCenter bot Mixed Air Outlet, !- Air Inlet Node Name + AirLoop DataCenter bot Supply Fan Outlet; !- Air Outlet Node Name + + + + Fan:OnOff, + DataCenter mid Supply Fan, !- Name + Always_On, !- Availability Schedule Name +0.55575, !- Fan Efficiency +622.5, !- Pressure Rise {Pa} + autosize, !- Maximum Flow Rate {m3/s} +0.855, !- Motor Efficiency + 1, !- Motor In Airstream Fraction + DataCenter mid Mixed Air Outlet, !- Air Inlet Node Name + AirLoop DataCenter mid Supply Fan Outlet; !- Air Outlet Node Name + + + + Fan:OnOff, + DataCenter top Supply Fan, !- Name + Always_On, !- Availability Schedule Name +0.55575, !- Fan Efficiency +622.5, !- Pressure Rise {Pa} + autosize, !- Maximum Flow Rate {m3/s} +0.855, !- Motor Efficiency + 1, !- Motor In Airstream Fraction + DataCenter top Mixed Air Outlet, !- Air Inlet Node Name + AirLoop DataCenter top Supply Fan Outlet; !- Air Outlet Node Name + +!- =========== ALL OBJECTS IN CLASS: FLUIDPROPERTIES:GLYCOLCONCENTRATIONS =========== + + + FluidProperties:GlycolConcentration, + EthyleneGlycol40Percent, !- Name + EthyleneGlycol, !- Glycol Type + , !- User Defined Glycol Name + 0.4; !- Glycol Concentration + + + + + + + +HeatExchanger:AirToAir:SensibleAndLatent, + VAV_bot WITH REHEAT OA Heat Recovery, !- Name + Always_On, !- Availability Schedule Name + AUTOSIZE, !- Nominal Supply Air Flow Rate {m3/s} + 0.70, !- Sensible Effectiveness at 100% Heating Air Flow {dimensionless} + 0.60, !- Latent Effectiveness at 100% Heating Air Flow {dimensionless} + 0.70, !- Sensible Effectiveness at 75% Heating Air Flow {dimensionless} + 0.60, !- Latent Effectiveness at 75% Heating Air Flow {dimensionless} + 0.75, !- Sensible Effectiveness at 100% Cooling Air Flow {dimensionless} + 0.60, !- Latent Effectiveness at 100% Cooling Air Flow {dimensionless} + 0.75, !- Sensible Effectiveness at 75% Cooling Air Flow {dimensionless} + 0.60, !- Latent Effectiveness at 75% Cooling Air Flow {dimensionless} + VAV_bot WITH REHEAT_OAInlet Node, !- Supply Air Inlet Node Name + VAV_bot WITH REHEAT Heat Recovery Outlet Node, !- Supply Air Outlet Node Name + VAV_bot WITH REHEAT_OARelief Node, !- Exhaust Air Inlet Node Name + VAV_bot WITH REHEAT Heat Recovery Secondary Outlet Node, !- Exhaust Air Outlet Node Name + 1871.04465666666, !- Nominal Electric Power {W} + Yes, !- Supply Air Outlet Temperature Control + Rotary, !- Heat Exchanger Type + ExhaustOnly, !- Frost Control Type + -23.3, !- Threshold Temperature {C} + 0.167, !- Initial Defrost Time Fraction {dimensionless} + 1.44; !- Rate of Defrost Time Fraction Increase {1/K} + + + + + + + + + + +HeatExchanger:AirToAir:SensibleAndLatent, + VAV_mid WITH REHEAT OA Heat Recovery, !- Name + Always_On, !- Availability Schedule Name + AUTOSIZE, !- Nominal Supply Air Flow Rate {m3/s} + 0.70, !- Sensible Effectiveness at 100% Heating Air Flow {dimensionless} + 0.60, !- Latent Effectiveness at 100% Heating Air Flow {dimensionless} + 0.70, !- Sensible Effectiveness at 75% Heating Air Flow {dimensionless} + 0.60, !- Latent Effectiveness at 75% Heating Air Flow {dimensionless} + 0.75, !- Sensible Effectiveness at 100% Cooling Air Flow {dimensionless} + 0.60, !- Latent Effectiveness at 100% Cooling Air Flow {dimensionless} + 0.75, !- Sensible Effectiveness at 75% Cooling Air Flow {dimensionless} + 0.60, !- Latent Effectiveness at 75% Cooling Air Flow {dimensionless} + VAV_mid WITH REHEAT_OAInlet Node, !- Supply Air Inlet Node Name + VAV_mid WITH REHEAT Heat Recovery Outlet Node, !- Supply Air Outlet Node Name + VAV_mid WITH REHEAT_OARelief Node, !- Exhaust Air Inlet Node Name + VAV_mid WITH REHEAT Heat Recovery Secondary Outlet Node, !- Exhaust Air Outlet Node Name + 1871.03891666666, !- Nominal Electric Power {W} + Yes, !- Supply Air Outlet Temperature Control + Rotary, !- Heat Exchanger Type + ExhaustOnly, !- Frost Control Type + -23.3, !- Threshold Temperature {C} + 0.167, !- Initial Defrost Time Fraction {dimensionless} + 1.44; !- Rate of Defrost Time Fraction Increase {1/K} + + + + + + + + + + +HeatExchanger:AirToAir:SensibleAndLatent, + VAV_top WITH REHEAT OA Heat Recovery, !- Name + Always_On, !- Availability Schedule Name + AUTOSIZE, !- Nominal Supply Air Flow Rate {m3/s} + 0.70, !- Sensible Effectiveness at 100% Heating Air Flow {dimensionless} + 0.60, !- Latent Effectiveness at 100% Heating Air Flow {dimensionless} + 0.70, !- Sensible Effectiveness at 75% Heating Air Flow {dimensionless} + 0.60, !- Latent Effectiveness at 75% Heating Air Flow {dimensionless} + 0.75, !- Sensible Effectiveness at 100% Cooling Air Flow {dimensionless} + 0.60, !- Latent Effectiveness at 100% Cooling Air Flow {dimensionless} + 0.75, !- Sensible Effectiveness at 75% Cooling Air Flow {dimensionless} + 0.60, !- Latent Effectiveness at 75% Cooling Air Flow {dimensionless} + VAV_top WITH REHEAT_OAInlet Node, !- Supply Air Inlet Node Name + VAV_top WITH REHEAT Heat Recovery Outlet Node, !- Supply Air Outlet Node Name + VAV_top WITH REHEAT_OARelief Node, !- Exhaust Air Inlet Node Name + VAV_top WITH REHEAT Heat Recovery Secondary Outlet Node, !- Exhaust Air Outlet Node Name + 1871.04465666666, !- Nominal Electric Power {W} + Yes, !- Supply Air Outlet Temperature Control + Rotary, !- Heat Exchanger Type + ExhaustOnly, !- Frost Control Type + -23.3, !- Threshold Temperature {C} + 0.167, !- Initial Defrost Time Fraction {dimensionless} + 1.44; !- Rate of Defrost Time Fraction Increase {1/K} + + + + + + + + + Curve:Cubic, + Tower_Fan_Curve, !- Name + 0, !- Coefficient1 Constant + 0, !- Coefficient2 x + 0, !- Coefficient3 x**2 + 1, !- Coefficient4 x**3 + 0.0, !- Minimum Value of x + 1.0; !- Maximum Value of x + +!- =========== ALL OBJECTS IN CLASS: WATER USE EQUIPMENT =========== + + WaterUse:Equipment, + Core_bottom sub cat, !- Name + sub cat, !- End-Use Subcategory + 3.66666666666667E-5, !- Peak Flow Rate {m3/s} + BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name + Core_bottom sub cat Temp Sched, !- Target Temperature Schedule Name + Core_bottom sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name + , !- Cold Water Supply Temperature Schedule Name + Core_bottom, !- Zone Name + Core_bottom sub cat Sensible fract sched, !- Sensible Fraction Schedule Name + Core_bottom sub cat Latent fract sched; !- Latent Fraction Schedule Name + + + + WaterUse:Equipment, + Core_mid sub cat, !- Name + sub cat, !- End-Use Subcategory + 3.66666666666667E-5, !- Peak Flow Rate {m3/s} + BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name + Core_mid sub cat Temp Sched, !- Target Temperature Schedule Name + Core_mid sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name + , !- Cold Water Supply Temperature Schedule Name + Core_mid, !- Zone Name + Core_mid sub cat Sensible fract sched, !- Sensible Fraction Schedule Name + Core_mid sub cat Latent fract sched; !- Latent Fraction Schedule Name + + + + WaterUse:Equipment, + Core_top sub cat, !- Name + sub cat, !- End-Use Subcategory + 3.66666666666667E-5, !- Peak Flow Rate {m3/s} + BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name + Core_top sub cat Temp Sched, !- Target Temperature Schedule Name + Core_top sub catHot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name + , !- Cold Water Supply Temperature Schedule Name + Core_top, !- Zone Name + Core_top sub cat Sensible fract sched, !- Sensible Fraction Schedule Name + Core_top sub cat Latent fract sched; !- Latent Fraction Schedule Name + +!- =========== ALL OBJECTS IN CLASS: WATER USE CONNECTIONS =========== +!***** Process Loads For Zone: Core_bottom ***** + + + WaterUse:Connections, + Core_bottom sub cat, !- Name + Core_bottom sub cat Water Inlet Node, !- Inlet Node Name + Core_bottom sub cat Water Outlet Node, !- Outlet Node Name + , !- Supply Water Storage Tank Name + , !- Reclamation Water Storage Tank Name + , !- Hot Water Supply Temperature Schedule Name + , !- Cold Water Supply Temperature Schedule Name + , !- Drain Water Heat Exchanger Type + , !- Drain Water Heat Exchanger Destination + , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} + Core_bottom sub cat; !- Water Use Equipment 1 Name + +!***** Process Loads For Zone: Core_mid ***** + + + WaterUse:Connections, + Core_mid sub cat, !- Name + Core_mid sub cat Water Inlet Node, !- Inlet Node Name + Core_mid sub cat Water Outlet Node, !- Outlet Node Name + , !- Supply Water Storage Tank Name + , !- Reclamation Water Storage Tank Name + , !- Hot Water Supply Temperature Schedule Name + , !- Cold Water Supply Temperature Schedule Name + , !- Drain Water Heat Exchanger Type + , !- Drain Water Heat Exchanger Destination + , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} + Core_mid sub cat; !- Water Use Equipment 1 Name + +!***** Process Loads For Zone: Core_top ***** + + + WaterUse:Connections, + Core_top sub cat, !- Name + Core_top sub cat Water Inlet Node, !- Inlet Node Name + Core_top sub cat Water Outlet Node, !- Outlet Node Name + , !- Supply Water Storage Tank Name + , !- Reclamation Water Storage Tank Name + , !- Hot Water Supply Temperature Schedule Name + , !- Cold Water Supply Temperature Schedule Name + , !- Drain Water Heat Exchanger Type + , !- Drain Water Heat Exchanger Destination + , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} + Core_top sub cat; !- Water Use Equipment 1 Name + +!No PV for this case + +! Added for addendum as modeling + + + EnergyManagementSystem:Sensor, + T_OA, !- Name + , !- Output:Variable or Output:Meter Index Key Name + Site Outdoor Air Drybulb Temperature; !- Output:Variable or Output:Meter Name + + + + EnergyManagementSystem:Sensor, + DataCenter_FanMassFlow, !- Name + AirLoop DataCenter Basement Supply Fan Outlet, !- Output:Variable or Output:Meter Index Key Name + System Node Mass Flow Rate; !- Output:Variable or Output:Meter Name + + + + EnergyManagementSystem:Sensor, + DataCenter_Humidifier_Status, !- Name + DataCenter Basement Humidifier, !- Output:Variable or Output:Meter Index Key Name + Humidifier Water Volume Flow Rate; !- Output:Variable or Output:Meter Name + + + + + + EnergyManagementSystem:Sensor, + DataCenter_HeatC_Status, !- Name + HEAT PUMP HEATING MODE AIRLOOP DATACENTER BASEMENT, !- Output:Variable or Output:Meter Index Key Name + Heating Coil Electric Power; !- Output:Variable or Output:Meter Name + + + + EnergyManagementSystem:Sensor, + DataCenter_AfterHumidifier_Temp, !- Name + DataCenter_Humidifier-DataCenter_ExtraElecHeatCNode, !- Output:Variable or Output:Meter Index Key Name + System Node Temperature; !- Output:Variable or Output:Meter Name + + + + EnergyManagementSystem:Sensor, + DataCenter_AfterElecHeatC_Temp, !- Name + DataCenter_EXTRAELECHEATC-DataCenter_EXTRAWATERHEATCNODE, !- Output:Variable or Output:Meter Index Key Name + System Node Temperature; !- Output:Variable or Output:Meter Name + +!- =========== ALL OBJECTS IN CLASS: ENERGYMANAGEMENTSYSTEM:ACTUATOR =========== + + + EnergyManagementSystem:Actuator, + DataCenter_ExtraElecHeatC_SP, !- Name + DataCenter_EXTRAELECHEATC-DataCenter_EXTRAWATERHEATCNODE, !- Actuated Component Unique Name + System Node Setpoint, !- Actuated Component Type + Temperature Setpoint; !- Actuated Component Control Type + + + + EnergyManagementSystem:Actuator, + DataCenter_ExtraWaterHeatC_SP, !- Name + AirLoop DataCenter Basement Supply Air Outlet, !- Actuated Component Unique Name + System Node Setpoint, !- Actuated Component Type + Temperature Setpoint; !- Actuated Component Control Type + + + + EnergyManagementSystem:Actuator, + DataCenter_ExtraElecHeatC_Status, !- Name + DataCenter_ExtraElecHeatC_Sch, !- Actuated Component Unique Name + Schedule:Compact, !- Actuated Component Type + Schedule Value; !- Actuated Component Control Type + + + + EnergyManagementSystem:Actuator, + DataCenter_ExtraWaterHeatC_Status, !- Name + DataCenter_ExtraWaterHeatC_Sch, !- Actuated Component Unique Name + Schedule:Compact, !- Actuated Component Type + Schedule Value; !- Actuated Component Control Type + +!- =========== ALL OBJECTS IN CLASS: ENERGYMANAGEMENTSYSTEM:PROGRAMCALLINGMANAGER =========== + + EnergyManagementSystem:ProgramCallingManager, + DataCenter_Main_Manager, !- Name + InsideHVACSystemIterationLoop, !- EnergyPlus Model Calling Point + DataCenter_Main; !- Program Name 1 + + + +EnergyManagementSystem:Program, + DataCenter_Main, !- Name + IF DataCenter_Humidifier_Status > 0, !- Program Line 1 + SET DataCenter_ExtraElecHeatC_Status = 1, !- Program Line 2 + SET DataCenter_ExtraElecHeatC_SP = DataCenter_AfterHumidifier_Temp + 0.36, !- + ELSE, !- + SET DataCenter_ExtraElecHeatC_Status = 0, !- + SET DataCenter_ExtraElecHeatC_SP = NULL, !- + ENDIF, !- + IF T_OA < 10 && DataCenter_HeatC_Status >0,, !- + SET HeatGain = 0 * (DataCenter_FanDesignMass/1.2) *2118, !- + SET FlowRate = (DataCenter_FanMassFlow/1.2)*2118, !- + SET DataCenter_PreheatDeltaT = HeatGain/(1.08*FlowRate), !- + SET DataCenter_ExtraWaterHeatC_Status = 1, !- + SET DataCenter_ExtraWaterHeatC_SP = DataCenter_AfterElecHeatC_Temp + DataCenter_PreheatDeltaT, !- + ELSE, !- + SET DataCenter_ExtraWaterHeatC_Status = 0, !- + SET DataCenter_ExtraWaterHeatC_SP = NULL, !- + ENDIF; !- + + + + + + + + + + + EnergyManagementSystem:GlobalVariable, + DataCenter_PreheatDeltaT;!- Erl Variable 1 Name + + + + EnergyManagementSystem:OutputVariable, + DataCenter_ExtraElecHeatC_Status, !- Name + DataCenter_ExtraElecHeatC_Status, !- EMS Variable Name + Averaged, !- Type of Data in Variable + SystemTimeStep, !- Update Frequency + , !- EMS Program or Subroutine Name + ; !- Units + + + + EnergyManagementSystem:OutputVariable, + DataCenter_ExtraWaterHeatC_Status, !- Name + DataCenter_ExtraWaterHeatC_Status, !- EMS Variable Name + Averaged, !- Type of Data in Variable + SystemTimeStep, !- Update Frequency + , !- EMS Program or Subroutine Name + ; !- Units + + + + EnergyManagementSystem:OutputVariable, + DataCenter_ExtraElecHeatC_SP, !- Name + DataCenter_ExtraElecHeatC_SP, !- EMS Variable Name + Averaged, !- Type of Data in Variable + SystemTimeStep, !- Update Frequency + , !- EMS Program or Subroutine Name + ; !- Units + + + + EnergyManagementSystem:OutputVariable, + DataCenter_ExtraWaterHeatC_SP, !- Name + DataCenter_ExtraWaterHeatC_SP, !- EMS Variable Name + Averaged, !- Type of Data in Variable + SystemTimeStep, !- Update Frequency + , !- EMS Program or Subroutine Name + ; !- Units + + + + EnergyManagementSystem:OutputVariable, + DataCenter_PreheatDeltaT,!- Name + DataCenter_PreheatDeltaT,!- EMS Variable Name + Averaged, !- Type of Data in Variable + SystemTimeStep, !- Update Frequency + , !- EMS Program or Subroutine Name + ; !- Units + +!- =========== ALL OBJECTS IN CLASS: ENERGYMANAGEMENTSYSTEM:INTERNALVARIABLE =========== + + + EnergyManagementSystem:InternalVariable, + DataCenter_FanDesignMass,!- Name + DataCenter Basement Supply Fan, !- Internal Data Index Key Name + Fan Maximum Mass Flow Rate; !- Internal Data Type + +!- =========== ALL OBJECTS IN CLASS: REPORT VARIABLE =========== + + + + + +!- =========== ALL OBJECTS IN CLASS: ENVIRONMENTAL IMPACT FACTORS =========== + + + EnvironmentalImpactFactors, + 0.3, !- District Heating Efficiency + 3.0, !- District Cooling COP {W/W} + 0.25, !- Steam Conversion Efficiency + 80.7272, !- Total Carbon Equivalent Emission Factor From N2O {kg/kg} + 6.2727, !- Total Carbon Equivalent Emission Factor From CH4 {kg/kg} + 0.2727; !- Total Carbon Equivalent Emission Factor From CO2 {kg/kg} + +!- =========== ALL OBJECTS IN CLASS: FUEL FACTORS =========== + +!- =========== ALL OBJECTS IN CLASS: REPORT =========== + + + Output:Surfaces:Drawing,DXF; + + + + Output:Surfaces:List,Details; + + + + Output:VariableDictionary,IDF; + + + + Output:Constructions,Constructions; + +!- =========== ALL OBJECTS IN CLASS: REPORT:TABLE:STYLE =========== + + + OutputControl:Table:Style, + CommaAndHTML; !- Column Separator + +!- =========== ALL OBJECTS IN CLASS: REPORT:TABLE:PREDEFINED =========== + Output:Table:SummaryReports, + AnnualBuildingUtilityPerformanceSummary, !- Report 1 Name + InputVerificationandResultsSummary, !- Report 2 Name + ClimaticDataSummary, !- Report 3 Name + EquipmentSummary, !- Report 4 Name + EnvelopeSummary, !- Report 5 Name + HVACSizingSummary, !- Report 6 Name + SystemSummary, !- Report 7 Name + ComponentSizingSummary; !- Report 8 Name + +!- =========== ALL OBJECTS IN CLASS: REPORT:TABLE:MONTHLY =========== + + + Output:Table:Monthly, + Monthly Indoor Temp, !- Name + 2, !- Digits After Decimal + Zone Mean Air Temperature, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + Site Outdoor Air Drybulb Temperature, !- Variable or Meter 2 Name + SumOrAverage; !- Aggregation Type for Variable or Meter 2 + + + + Output:Table:Monthly, + Occupant Comfort Data Summary, !- Name + 3, !- Digits After Decimal + People Occupant Count, !- Variable or Meter 1 Name + HoursNonZero, !- Aggregation Type for Variable or Meter 1 + Zone Air Temperature, !- Variable or Meter 2 Name + SumOrAverageDuringHoursShown, !- Aggregation Type for Variable or Meter 2 + Zone Air Relative Humidity, !- Variable or Meter 3 Name + SumOrAverageDuringHoursShown, !- Aggregation Type for Variable or Meter 3 + Zone Thermal Comfort Mean Radiant Temperature, !- Variable or Meter 4 Name + SumOrAverageDuringHoursShown, !- Aggregation Type for Variable or Meter 4 + Zone Thermal Comfort ASHRAE 55 Simple Model Summer or Winter Clothes Not Comfortable Time, !- Variable or Meter 5 Name + SumOrAverageDuringHoursShown, !- Aggregation Type for Variable or Meter 5 + Zone Thermal Comfort Fanger Model PMV, !- Variable or Meter 6 Name + SumOrAverageDuringHoursShown; !- Aggregation Type for Variable or Meter 6 + + + + Output:Table:Monthly, + Emissions Data Summary, !- Name + 4, !- Digits After Decimal + CO2:Facility, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + NOx:Facility, !- Variable or Meter 2 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 2 + SO2:Facility, !- Variable or Meter 3 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 3 + PM:Facility, !- Variable or Meter 4 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 4 + Hg:Facility, !- Variable or Meter 5 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 5 + WaterEnvironmentalFactors:Facility, !- Variable or Meter 6 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 6 + Carbon Equivalent:Facility, !- Variable or Meter 7 Name + SumOrAverage; !- Aggregation Type for Variable or Meter 7 + + + + Output:Table:Monthly, + Outdoor Air Summary, !- Name + 3, !- Digits After Decimal + Zone People Occupant Count, !- Variable or Meter 1 Name + HoursNonZero, !- Aggregation Type for Variable or Meter 1 + Zone People Occupant Count, !- Variable or Meter 2 Name + SumOrAverageDuringHoursShown, !- Aggregation Type for Variable or Meter 2 + Zone Mechanical Ventilation Air Changes per Hour, !- Variable or Meter 3 Name + SumOrAverageDuringHoursShown, !- Aggregation Type for Variable or Meter 3 + Zone Infiltration Air Change Rate, !- Variable or Meter 4 Name + SumOrAverageDuringHoursShown; !- Aggregation Type for Variable or Meter 4 + + + + Output:Table:Monthly, + Ventilation Load Components, !- Name + 3, !- Digits After Decimal + Zone Mechanical Ventilation No Load Heat Removal Energy, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + Zone Mechanical Ventilation Cooling Load Increase Energy, !- Variable or Meter 2 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 2 + Zone Mechanical Ventilation Cooling Load Increase Due to Overheating Energy, !- Variable or Meter 3 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 3 + Zone Mechanical Ventilation Cooling Load Decrease Energy, !- Variable or Meter 4 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 4 + Zone Mechanical Ventilation No Load Heat Addition Energy, !- Variable or Meter 5 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 5 + Zone Mechanical Ventilation Heating Load Increase Energy, !- Variable or Meter 6 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 6 + Zone Mechanical Ventilation Heating Load Increase Due to Overcooling Energy, !- Variable or Meter 7 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 7 + Zone Mechanical Ventilation Heating Load Decrease Energy, !- Variable or Meter 8 Name + SumOrAverage; !- Aggregation Type for Variable or Meter 8 + + + + Output:Table:Monthly, + Overall HVAC Air System Loads, !- Name + 3, !- Digits After Decimal + Air System Total Heating Energy, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + Air System Total Cooling Energy, !- Variable or Meter 2 Name + SumOrAverage; !- Aggregation Type for Variable or Meter 2 + + + + Output:Table:Monthly, + Overall HVAC System Energy, !- Name + 3, !- Digits After Decimal + Electricity:HVAC, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + Heating:Gas, !- Variable or Meter 2 Name + SumOrAverage; !- Aggregation Type for Variable or Meter 2 + + + + Output:Table:Monthly, + Components of Peak Electrical Demand, !- Name + 3, !- Digits After Decimal + Electricity:Facility, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + Electricity:Facility, !- Variable or Meter 2 Name + Maximum, !- Aggregation Type for Variable or Meter 2 + InteriorLights:Electricity, !- Variable or Meter 3 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 3 + InteriorEquipment:Electricity, !- Variable or Meter 4 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 4 + Fans:Electricity, !- Variable or Meter 5 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 5 + Heating:Electricity, !- Variable or Meter 6 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 6 + Cooling:Electricity, !- Variable or Meter 7 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 7 + ExteriorLights:Electricity, !- Variable or Meter 8 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 8 + Pumps:Electricity, !- Variable or Meter 9 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 9 + HeatRejection:Electricity, !- Variable or Meter 10 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 10 + ExteriorEquipment:Electricity, !- Variable or Meter 11 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 11 + Humidification:Electricity, !- Variable or Meter 12 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 12 + HeatRecovery:Electricity,!- Variable or Meter 13 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 13 + WaterSystems:Electricity,!- Variable or Meter 14 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 14 + Refrigeration:Electricity, !- Variable or Meter 15 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 15 + Generators:Electricity, !- Variable or Meter 16 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 16 + ElectricityProduced:Facility, !- Variable or Meter 17 Name + ValueWhenMaximumOrMinimum; !- Aggregation Type for Variable or Meter 17 + + + + Output:Table:Monthly, + Components of Peak Net Electrical Demand, !- Name + 3, !- Digits After Decimal + ElectricityNet:Facility, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + ElectricityNet:Facility, !- Variable or Meter 2 Name + Maximum, !- Aggregation Type for Variable or Meter 2 + InteriorLights:Electricity, !- Variable or Meter 3 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 3 + InteriorEquipment:Electricity, !- Variable or Meter 4 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 4 + Fans:Electricity, !- Variable or Meter 5 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 5 + Heating:Electricity, !- Variable or Meter 6 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 6 + Cooling:Electricity, !- Variable or Meter 7 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 7 + ExteriorLights:Electricity, !- Variable or Meter 8 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 8 + Pumps:Electricity, !- Variable or Meter 9 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 9 + HeatRejection:Electricity, !- Variable or Meter 10 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 10 + ExteriorEquipment:Electricity, !- Variable or Meter 11 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 11 + Humidification:Electricity, !- Variable or Meter 12 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 12 + HeatRecovery:Electricity,!- Variable or Meter 13 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 13 + WaterSystems:Electricity,!- Variable or Meter 14 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 14 + Refrigeration:Electricity, !- Variable or Meter 15 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 15 + Generators:Electricity, !- Variable or Meter 16 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 16 + ElectricityProduced:Facility, !- Variable or Meter 17 Name + ValueWhenMaximumOrMinimum; !- Aggregation Type for Variable or Meter 17 + + + + Output:Table:Monthly, + Setpoints Not Met With Temperatures, !- Name + 2, !- Digits After Decimal + Zone Heating Setpoint Not Met Time, !- Variable or Meter 1 Name + HoursNonZero, !- Aggregation Type for Variable or Meter 1 + Zone Mean Air Temperature, !- Variable or Meter 2 Name + SumOrAverageDuringHoursShown, !- Aggregation Type for Variable or Meter 2 + Zone Heating Setpoint Not Met While Occupied Time, !- Variable or Meter 3 Name + HoursNonZero, !- Aggregation Type for Variable or Meter 3 + Zone Mean Air Temperature, !- Variable or Meter 4 Name + SumOrAverageDuringHoursShown, !- Aggregation Type for Variable or Meter 4 + Zone Cooling Setpoint Not Met Time, !- Variable or Meter 5 Name + HoursNonZero, !- Aggregation Type for Variable or Meter 5 + Zone Mean Air Temperature, !- Variable or Meter 6 Name + SumOrAverageDuringHoursShown, !- Aggregation Type for Variable or Meter 6 + Zone Cooling Setpoint Not Met While Occupied Time, !- Variable or Meter 7 Name + HoursNonZero, !- Aggregation Type for Variable or Meter 7 + Zone Mean Air Temperature, !- Variable or Meter 8 Name + SumOrAverageDuringHoursShown; !- Aggregation Type for Variable or Meter 8 + + + + Output:Table:Monthly, + Comfort Report - Simple 55, !- Name + 2, !- Digits After Decimal + Zone Thermal Comfort ASHRAE 55 Simple Model Summer Clothes Not Comfortable Time, !- Variable or Meter 1 Name + HoursNonZero, !- Aggregation Type for Variable or Meter 1 + Zone Mean Air Temperature, !- Variable or Meter 2 Name + SumOrAverageDuringHoursShown, !- Aggregation Type for Variable or Meter 2 + Zone Thermal Comfort ASHRAE 55 Simple Model Winter Clothes Not Comfortable Time, !- Variable or Meter 3 Name + HoursNonZero, !- Aggregation Type for Variable or Meter 3 + Zone Mean Air Temperature, !- Variable or Meter 4 Name + SumOrAverageDuringHoursShown, !- Aggregation Type for Variable or Meter 4 + Zone Thermal Comfort ASHRAE 55 Simple Model Summer or Winter Clothes Not Comfortable Time, !- Variable or Meter 5 Name + HoursNonZero, !- Aggregation Type for Variable or Meter 5 + Zone Mean Air Temperature, !- Variable or Meter 6 Name + SumOrAverageDuringHoursShown; !- Aggregation Type for Variable or Meter 6 + + + + Output:Table:Monthly, + Building Loads - Cooling,!- Name + 2, !- Digits After Decimal + Zone Air System Sensible Cooling Energy, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + Zone Air System Sensible Cooling Rate, !- Variable or Meter 2 Name + Maximum, !- Aggregation Type for Variable or Meter 2 + Site Outdoor Air Drybulb Temperature, !- Variable or Meter 3 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 3 + Site Outdoor Air Wetbulb Temperature, !- Variable or Meter 4 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 4 + Zone Total Internal Latent Gain Energy, !- Variable or Meter 5 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 5 + Zone Total Internal Latent Gain Energy, !- Variable or Meter 6 Name + Maximum, !- Aggregation Type for Variable or Meter 6 + Site Outdoor Air Drybulb Temperature, !- Variable or Meter 7 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 7 + Site Outdoor Air Wetbulb Temperature, !- Variable or Meter 8 Name + ValueWhenMaximumOrMinimum; !- Aggregation Type for Variable or Meter 8 + + + + Output:Table:Monthly, + Building Loads - Heating,!- Name + 2, !- Digits After Decimal + Zone Air System Sensible Heating Energy, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + Zone Air System Sensible Heating Rate, !- Variable or Meter 2 Name + Maximum, !- Aggregation Type for Variable or Meter 2 + Site Outdoor Air Drybulb Temperature, !- Variable or Meter 3 Name + ValueWhenMaximumOrMinimum; !- Aggregation Type for Variable or Meter 3 + + + + Output:Table:Monthly, + Building Loads - Electric, !- Name + 2, !- Digits After Decimal + Zone Lights Electric Energy, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + Zone Lights Electric Energy, !- Variable or Meter 2 Name + Maximum, !- Aggregation Type for Variable or Meter 2 + Zone Electric Equipment Electric Energy, !- Variable or Meter 3 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 3 + Zone Electric Equipment Electric Energy, !- Variable or Meter 4 Name + Maximum; !- Aggregation Type for Variable or Meter 4 + + + + Output:Table:Monthly, + Space Loads, !- Name + 2, !- Digits After Decimal + Zone People Total Heating Energy, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + Zone Lights Total Heating Energy, !- Variable or Meter 2 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 2 + Zone Electric Equipment Total Heating Energy, !- Variable or Meter 3 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 3 + Zone Infiltration Sensible Heat Gain Energy, !- Variable or Meter 4 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 4 + Zone Infiltration Sensible Heat Loss Energy, !- Variable or Meter 5 Name + SumOrAverage; !- Aggregation Type for Variable or Meter 5 + + + + Output:Table:Monthly, + Energy Consumption - Electricity & Natural Gas, !- Name + 2, !- Digits After Decimal + Electricity:Building, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + Electricity:Building, !- Variable or Meter 2 Name + Maximum, !- Aggregation Type for Variable or Meter 2 + Gas:Building, !- Variable or Meter 3 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 3 + Gas:Building, !- Variable or Meter 4 Name + Maximum; !- Aggregation Type for Variable or Meter 4 + + + + Output:Table:Monthly, + Building Energy Performance - Electricity, !- Name + 2, !- Digits After Decimal + InteriorLights:Electricity, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + TaskLights:InteriorLights:Electricity, !- Variable or Meter 2 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 2 + ExteriorLights:Electricity, !- Variable or Meter 3 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 3 + General:InteriorEquipment:Electricity, !- Variable or Meter 4 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 4 + ExteriorEquipment:Electricity, !- Variable or Meter 5 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 5 + Fans:Electricity, !- Variable or Meter 6 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 6 + Pumps:Electricity, !- Variable or Meter 7 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 7 + Heating:Electricity, !- Variable or Meter 8 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 8 + Cooling:Electricity, !- Variable or Meter 9 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 9 + HeatRejection:Electricity, !- Variable or Meter 10 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 10 + Humidifier:Electricity, !- Variable or Meter 11 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 11 + HeatRecovery:Electricity,!- Variable or Meter 12 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 12 + WaterSystems:Electricity,!- Variable or Meter 13 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 13 + Cogeneration:Electricity,!- Variable or Meter 14 Name + SumOrAverage; !- Aggregation Type for Variable or Meter 14 + + + + Output:Table:Monthly, + Building Energy Performance - Natural Gas, !- Name + 2, !- Digits After Decimal + InteriorEquipment:Gas, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + ExteriorEquipment:Gas, !- Variable or Meter 2 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 2 + Heating:Gas, !- Variable or Meter 3 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 3 + Cooling:Gas, !- Variable or Meter 4 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 4 + WaterSystems:Gas, !- Variable or Meter 5 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 5 + Cogeneration:Gas, !- Variable or Meter 6 Name + SumOrAverage; !- Aggregation Type for Variable or Meter 6 + + + + Output:Table:Monthly, + Peak Energy End-Use - Electricity Part 1, !- Name + 2, !- Digits After Decimal + InteriorLights:Electricity, !- Variable or Meter 1 Name + Maximum, !- Aggregation Type for Variable or Meter 1 + TaskLights:InteriorLights:Electricity, !- Variable or Meter 2 Name + Maximum, !- Aggregation Type for Variable or Meter 2 + ExteriorLights:Electricity, !- Variable or Meter 3 Name + Maximum, !- Aggregation Type for Variable or Meter 3 + General:InteriorEquipment:Electricity, !- Variable or Meter 4 Name + Maximum, !- Aggregation Type for Variable or Meter 4 + ExteriorEquipment:Electricity, !- Variable or Meter 5 Name + Maximum, !- Aggregation Type for Variable or Meter 5 + Fans:Electricity, !- Variable or Meter 6 Name + Maximum, !- Aggregation Type for Variable or Meter 6 + Pumps:Electricity, !- Variable or Meter 7 Name + Maximum, !- Aggregation Type for Variable or Meter 7 + Heating:Electricity, !- Variable or Meter 8 Name + Maximum; !- Aggregation Type for Variable or Meter 8 + + + + Output:Meter:MeterFileOnly,InteriorLights:Electricity,Hourly; + + + + Output:Meter:MeterFileOnly,InteriorEquipment:Electricity,Hourly; + + + + Output:Table:Monthly, + Peak Electrical Demand, !- Name + 3, !- Digits After Decimal + Electricity:Facility, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + Electricity:Facility, !- Variable or Meter 2 Name + Maximum, !- Aggregation Type for Variable or Meter 2 + InteriorLights:Electricity, !- Variable or Meter 3 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 3 + InteriorEquipment:Electricity, !- Variable or Meter 4 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 4 + Fans:Electricity, !- Variable or Meter 5 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 5 + Heating:Electricity, !- Variable or Meter 6 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 6 + Cooling:Electricity, !- Variable or Meter 7 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 7 + ExteriorLights:Electricity, !- Variable or Meter 8 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 8 + Pumps:Electricity, !- Variable or Meter 9 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 9 + HeatRejection:Electricity, !- Variable or Meter 10 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 10 + ExteriorEquipment:Electricity, !- Variable or Meter 11 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 11 + Humidification:Electricity, !- Variable or Meter 12 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 12 + HeatRecovery:Electricity,!- Variable or Meter 13 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 13 + WaterSystems:Electricity,!- Variable or Meter 14 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 14 + Refrigeration:Electricity, !- Variable or Meter 15 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 15 + Generators:Electricity, !- Variable or Meter 16 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 16 + ElectricityProduced:Facility, !- Variable or Meter 17 Name + ValueWhenMaximumOrMinimum; !- Aggregation Type for Variable or Meter 17 + + + + Output:Table:Monthly, + Peak Gas Demand, !- Name + 3, !- Digits After Decimal + Gas:Facility, !- Variable or Meter 1 Name + SumOrAverage, !- Aggregation Type for Variable or Meter 1 + Gas:Facility, !- Variable or Meter 2 Name + Maximum, !- Aggregation Type for Variable or Meter 2 + Gas:HVAC, !- Variable or Meter 3 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 3 + InteriorEquipment:Gas, !- Variable or Meter 4 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 4 + MiscPlugGas:InteriorEquipment:Gas, !- Variable or Meter 5 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 5 + Gas:Plant, !- Variable or Meter 6 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 6 + WaterSystems:Gas, !- Variable or Meter 7 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 7 + Water Heater:WaterSystems:Gas, !- Variable or Meter 8 Name + ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 8 + Heating:Gas, !- Variable or Meter 9 Name + ValueWhenMaximumOrMinimum; !- Aggregation Type for Variable or Meter 9 + + + + + +! +! This EMS program assigns loads to the transformer. +! It is used to calculate the impact of Addendum 90.1-2007o: Transformers +! + + + EnergyManagementSystem:Sensor, + Facility_Int_LTG, !- Name + , !- Output:Variable or Output:Meter Index Key Name + InteriorLights:Electricity; !- Output:Variable or Output:Meter Name + + + + EnergyManagementSystem:GlobalVariable, + Wired_LTG; !- Erl Variable 1 Name + + + + EnergyManagementSystem:Program, + Transformer_Load_Prog, !- Name + SET Wired_LTG = Facility_Int_LTG*0.0281; !- Program Line 1 + + + + EnergyManagementSystem:ProgramCallingManager, + Transformer_Load_Prog_Manager, !- Name + AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point + Transformer_Load_Prog; !- Program Name 1 + + + + EnergyManagementSystem:OutputVariable, + Wired_LTG, !- Name + Wired_LTG, !- EMS Variable Name + Summed, !- Type of Data in Variable + ZoneTimeStep, !- Update Frequency + , !- EMS Program or Subroutine Name + J; !- Units + + + + Meter:Custom, + Wired_LTG_Electricity, !- Name + Electricity, !- Fuel Type + , !- Key Name 1 + Wired_LTG; !- Output Variable or Meter Name 1 + + + + Meter:CustomDecrement, + Wired_Int_EQUIP, !- Name + Electricity, !- Fuel Type + InteriorEquipment:Electricity, !- Source Meter Name + , !- Key Name 1 + DataCenter_PlugLoads:InteriorEquipment:Electricity; !- Output Variable or Meter Name 1 + + + + ElectricLoadCenter:Transformer, + Transformer 1, !- Name + Always_On, !- Availability Schedule Name + PowerInFromGrid, !- Transformer Usage + , !- Zone Name + , !- Radiative Fraction + 500000, !- Nameplate Rating {VA} + 3, !- Phase + Aluminum, !- Conductor Material + 150, !- Full Load Temperature Rise {C} + 0.1, !- Fraction of Eddy Current Losses + NominalEfficiency, !- Performance Input Method + , !- Rated No Load Loss {W} + , !- Rated Load Loss {W} + 0.991, !- Nameplate Efficiency + 0.35, !- Per Unit Load for Nameplate Efficiency + 75, !- Reference Temperature for Nameplate Efficiency {C} + , !- Per Unit Load for Maximum Efficiency + Yes, !- Consider Transformer Loss for Utility Cost + Wired_LTG_Electricity, !- Meter 1 Name + Wired_Int_EQUIP; !- Meter 2 Name + +! +! End Addendum O transformers implementation +! + + + + + +EnergyManagementSystem:Sensor, + Tower_PumpMassFlow, !- Name + TowerWaterSys Supply Inlet Node, !- Output:Variable or Output:Meter Index Key Name + System Node Mass Flow Rate; !- Output:Variable or Output:Meter Name + + + + + + + + + +EnergyManagementSystem:Sensor, + Chiller1_Status, !- Name + CoolSys1 Chiller1, !- Output:Variable or Output:Meter Index Key Name + Chiller Electric Power; !- Output:Variable or Output:Meter Name + + + + + + + + + +EnergyManagementSystem:Sensor, + Chiller2_Status, !- Name + CoolSys1 Chiller2, !- Output:Variable or Output:Meter Index Key Name + Chiller Electric Power; !- Output:Variable or Output:Meter Name + + + + + + + + + +EnergyManagementSystem:Sensor, + SensedCurveInput, !- Name + Tower_Fan_Curve, !- Output:Variable or Output:Meter Index Key Name + Performance Curve Input Variable 1 Value; !- Output:Variable or Output:Meter Name + + + + + + + + + +EnergyManagementSystem:Sensor, + SensedCurveValue, !- Name + Tower_Fan_Curve, !- Output:Variable or Output:Meter Index Key Name + Performance Curve Output Value; !- Output:Variable or Output:Meter Name + + + + + + + + + +EnergyManagementSystem:Actuator, + TowerCurveOutput, !- Name + Tower_Fan_Curve, !- Actuated Component Unique Name + Curve, !- Actuated Component Type + Curve Result; !- Actuated Component Control Type + + + + + + + + + +EnergyManagementSystem:Program, + ChangTowerFlow, !- Name + IF Chiller1_Status > 0 && Chiller2_Status == 0 && SensedCurveInput > 0.2, !- Program Line 1 + IF (0.5 * SensedCurveInput) > 0.2, !- Program Line 2 + SET AirInput = 0.5 * SensedCurveInput, !- + ELSE, !- + SET AirInput = 0.2, !- + ENDIF, !- + SET TowerCurveOutput = 2* (AirInput^3), !- + ELSE, !- + SET TowerCurveOutput = SensedCurveValue, !- + ENDIF; !- + + + + + + + + + +EnergyManagementSystem:ProgramCallingManager, + ChangeTowerFlow_Manager, !- Name + InsideHVACSystemIterationLoop, !- EnergyPlus Model Calling Point + ChangTowerFlow; !- Program Name 1 + + + + + + + + + EnergyManagementSystem:GlobalVariable, + BoilerType, !- Erl Variable 1 Name + CapRated, !- Erl Variable 2 Name + EtRated, !- Erl Variable 3 Name + PLRx, !- + Ecx, !- + SkinLossRate; !- + + + + EnergyManagementSystem:Sensor, + BoilerPLR, !- Name + HeatSys1 Boiler, !- Output:Variable or Output:Meter Index Key Name + Boiler Part Load Ratio; !- Output:Variable or Output:Meter Name + + + + EnergyManagementSystem:Actuator, + BoilerCurve, !- Name + HEATSYS1 BOILER EFFICIENCY CURVE, !- Actuated Component Unique Name + Curve, !- Actuated Component Type + Curve Result; !- Actuated Component Control Type + + + +EnergyManagementSystem:Program, ! Addendum AM + SetBoilerPar, +SET CapRated = 1422106.94, ! EMS Bolier Nominal Capacity {W}. +SET EtRated = 0.8125, ! EMS Boiler Nominal Thermal Efficiency. overriden by script + SET CapRated = (CapRated *3.412)/1000, !Change from W to MBH + SET SkinLossRate = 0.02, + SET BoilerType = 1, + IF BoilerType == 1, + IF CapRated >10000, + SET PLRx = 0.2, + ELSEIF CapRated >5000, + SET PLRx = 0.25, + ELSEIF CapRated >1000, + SET PLRx = 0.33, + ELSE, + SET BoilerType = 2, + SET PLRx = 0.2, + ENDIF, + ELSE, + SET PLRx = 0.2, + ENDIF, + + IF BoilerType == 1, + SET CurveX = 0.975 + 0.305 * PLRx - 0.527 * (PLRx^2) + 0.249 * (PLRx^3), + ELSE, + SET CurveX = 0.907 + 0.320 * PLRx - 0.420 * (PLRx^2) + 0.193 * (PLRx^3), + ENDIF, + + SET LoadX = CapRated * PLRx, + SET Etx = CurveX * EtRated, + SET InputEx = LoadX/Etx, + SET SkinEx = CapRated * SkinLossRate, + SET Ecx = (LoadX + SkinEx)/InputEx; + + EnergyManagementSystem:Program, + SetBoilerCurve, !- Name + IF BoilerPLR >= PLRx, !- Program Line 1 + IF BoilerType == 1, !- Program Line 2 + SET BoilerCurve = 0.975 + 0.305*BoilerPLR - 0.527*(BoilerPLR^2) + 0.249*(BoilerPLR^3), !- + ELSE, !- + SET BoilerCurve = 0.907 + 0.320*BoilerPLR - 0.420*(BoilerPLR^2) + 0.193*(BoilerPLR^3), !- + ENDIF, !- + ELSE, !- + IF BoilerPLR == 0, !- + SET BoilerCurve = NULL, !- + ELSE, !- + IF BoilerPLR <0.05, !- + SET BoilerCurve = (0.05/(0.05 + SkinLossRate)) * (Ecx/EtRated), !- + ELSE, !- + SET BoilerCurve = (BoilerPLR/(BoilerPLR + SkinLossRate)) * (Ecx/EtRated), !- + ENDIF, !- + ENDIF, !- + ENDIF; !- + + + + EnergyManagementSystem:ProgramCallingManager, + BoilerParManager, !- Name + BeginNewEnvironment, !- EnergyPlus Model Calling Point + SetBoilerPar; !- Program Name 1 + + + + EnergyManagementSystem:ProgramCallingManager, + BoilerCurveManager, !- Name + InsideHVACSystemIterationLoop, !- EnergyPlus Model Calling Point + SetBoilerCurve; !- Program Name 1 + + + + + + +EnergyManagementSystem:Sensor, + OAT, !- Name + Environment, !- Output:Variable or Output:Meter Index Key Name + Site Outdoor Air Drybulb Temperature; !- Output:Variable or Output:Meter Name + + + + + + + + + +EnergyManagementSystem:Actuator, + CLGSETP_SCH_Actuator, !- Name + CLGSETP_SCH_Yes_Optimum, !- Actuated Component Unique Name + Schedule:Compact, !- Actuated Component Type + Schedule Value; !- Actuated Component Control Type + + + + + + + + + +EnergyManagementSystem:Actuator, + HTGSETP_SCH_Actuator, !- Name + HTGSETP_SCH_Yes_Optimum, !- Actuated Component Unique Name + Schedule:Compact, !- Actuated Component Type + Schedule Value; !- Actuated Component Control Type + + + + + + + + + +EnergyManagementSystem:ProgramCallingManager, + OA_BASED_OPTIMUM_START_EMS_Program Manager, !- Name + AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point + OA_BASED_OPTIMUM_START_EMS_Program; !- Program Name 1 + + + + + + + + + +EnergyManagementSystem:Program, + OA_BASED_OPTIMUM_START_EMS_Program, !- Name + IF DaylightSavings==0 && DayOfWeek>1 && Hour==4 && OAT<23.9 && OAT>1.7, !- Program Line 1 + SET CLGSETP_SCH_Actuator = 26.7, !- Program Line 2 + SET HTGSETP_SCH_Actuator = 15.6, !- + ELSEIF DaylightSavings==1 && DayOfWeek>1 && Hour==3 && OAT<23.9 && OAT>1.7, !- + SET CLGSETP_SCH_Actuator = 26.7, !- + SET HTGSETP_SCH_Actuator = 15.6, !- + ELSE, !- + SET CLGSETP_SCH_Actuator = NULL, !- + SET HTGSETP_SCH_Actuator = NULL, !- + ENDIF; !- + + + + + + + + +!- no Supply fan size-based optimum start EMS is used + + + + + + +EnergyManagementSystem:InternalVariable, + Chiller2PumpDesignFlow, !- Name + COOLSYS1 CHILLER2 PUMP, !- Internal Data Index Key Name + Pump Maximum Mass Flow Rate; !- Internal Data Type + +EnergyManagementSystem:Actuator, + Chiller2PumpStatus, !- Name + COOLSYS1 CHILLER2 PUMP, !- Actuated Component Unique Name + Plant Component Pump:ConstantSpeed, !- Actuated Component Type + On/Off Supervisory; !- Actuated Component Control Type + +EnergyManagementSystem:Actuator, + Chiller1PumpFlow, !- Name + COOLSYS1 CHILLER1 PUMP, !- Actuated Component Unique Name + Pump, !- Actuated Component Type + Pump Mass Flow Rate; !- Actuated Component Control Type + +EnergyManagementSystem:Actuator, + Chiller2PumpFlow, !- Name + COOLSYS1 CHILLER2 PUMP, !- Actuated Component Unique Name + Pump, !- Actuated Component Type + Pump Mass Flow Rate; !- Actuated Component Control Type + +EnergyManagementSystem:Actuator, + Chiller2Status, !- Name + COOLSYS1 CHILLER2, !- Actuated Component Unique Name + Plant Component Chiller:Electric:ReformulatedEIR, !- Actuated Component Type + On/Off Supervisory; !- Actuated Component Control Type + +EnergyManagementSystem:Sensor, + ChillerPlantDemandLoad, !- Name + CoolSys1, !- Output:Variable or Output:Meter Index Key Name + Plant Supply Side Cooling Demand Rate; !- Output:Variable or Output:Meter Name + + +EnergyManagementSystem:Program, ! Addendum DV + PlantPump_EMS_Program, ! +IF ChillerPlantDemandLoad < 1156291.305, ! Addendum DV EMS Chiller Capacity. Will be overriden by sizing script. + SET Chiller2PumpStatus = 0, !- + SET Chiller2Status = 0, !- + SET Chiller2PumpFlow = 0, !- + ELSE, !- + SET Chiller2PumpStatus = 1, !- + SET Chiller2Status = 1, !- + SET Chiller2PumpFlow = Chiller2PumpDesignFlow, !- + ENDIF; !- + +EnergyManagementSystem:ProgramCallingManager, + PlantPump_EMS_Program Manager, !- Name + InsideHVACSystemIterationLoop, !- EnergyPlus Model Calling Point + PlantPump_EMS_Program; !- Program Name 1 + + + + + + +!- Implementation of Addendum_AH 90.1-2013 for Interior lighting control through EMS override + +!- for zone "Basement" + +EnergyManagementSystem:Sensor, + Basement_LSr, !- Name + Basement, !- Output:Variable or Output:Meter Index Key Name + Zone Lights Electric Power; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:Sensor, + Basement_Occ_Sensor, !- Name + Basement, !- Output:Variable or Output:Meter Index Key Name + People Occupant Count; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:InternalVariable, + Basement_Area, !- Name + Basement, !- Internal Data Index Key Name + Zone Floor Area; !- Internal Data Type + +EnergyManagementSystem:Actuator, + Basement_Light_Actuator, !- Name + Basement_lights, !- Actuated Component Unique Name + Lights, !- Actuated Component Type + Electric Power Level; !- Actuated Component Control Type + +EnergyManagementSystem:Program, + SET_Basement_Light_EMS_Program, !- Name + SET Basement_LSr_IP=0.093*Basement_LSr/Basement_Area, ! Calculate the actual LPD for each hour + IF (Basement_Occ_Sensor <= 0) && (Basement_LSr_IP >= 0.02), + SET Basement_Light_Actuator = 0.02*Basement_Area/0.09290304, + ELSE, + SET Basement_Light_Actuator = NULL, + ENDIF; + +EnergyManagementSystem:ProgramCallingManager, + SET_Basement_Light_EMS_Program_Prog_Manager, !- Name + AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point + SET_Basement_Light_EMS_Program; !- Program Name 1 + +!- for zone "Core_bottom" + +EnergyManagementSystem:Sensor, + Core_bottom_LSr, !- Name + Core_bottom, !- Output:Variable or Output:Meter Index Key Name + Zone Lights Electric Power; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:Sensor, + Core_bottom_Occ_Sensor, !- Name + Core_bottom, !- Output:Variable or Output:Meter Index Key Name + People Occupant Count; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:InternalVariable, + Core_bottom_Area, !- Name + Core_bottom, !- Internal Data Index Key Name + Zone Floor Area; !- Internal Data Type + +EnergyManagementSystem:Actuator, + Core_bottom_Light_Actuator, !- Name + Core_bottom_lights, !- Actuated Component Unique Name + Lights, !- Actuated Component Type + Electric Power Level; !- Actuated Component Control Type + +EnergyManagementSystem:Program, + SET_Core_bottom_Light_EMS_Program, !- Name + SET Core_bottom_LSr_IP=0.093*Core_bottom_LSr/Core_bottom_Area, ! Calculate the actual LPD for each hour + IF (Core_bottom_Occ_Sensor <= 0) && (Core_bottom_LSr_IP >= 0.02), + SET Core_bottom_Light_Actuator = 0.02*Core_bottom_Area/0.09290304, + ELSE, + SET Core_bottom_Light_Actuator = NULL, + ENDIF; + +EnergyManagementSystem:ProgramCallingManager, + SET_Core_bottom_Light_EMS_Program_Prog_Manager, !- Name + AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point + SET_Core_bottom_Light_EMS_Program; !- Program Name 1 + +!- for zone "Core_mid" + +EnergyManagementSystem:Sensor, + Core_mid_LSr, !- Name + Core_mid, !- Output:Variable or Output:Meter Index Key Name + Zone Lights Electric Power; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:Sensor, + Core_mid_Occ_Sensor, !- Name + Core_mid, !- Output:Variable or Output:Meter Index Key Name + People Occupant Count; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:InternalVariable, + Core_mid_Area, !- Name + Core_mid, !- Internal Data Index Key Name + Zone Floor Area; !- Internal Data Type + +EnergyManagementSystem:Actuator, + Core_mid_Light_Actuator, !- Name + Core_mid_lights, !- Actuated Component Unique Name + Lights, !- Actuated Component Type + Electric Power Level; !- Actuated Component Control Type + +EnergyManagementSystem:Program, + SET_Core_mid_Light_EMS_Program, !- Name + SET Core_mid_LSr_IP=0.093*Core_mid_LSr/Core_mid_Area, ! Calculate the actual LPD for each hour + IF (Core_mid_Occ_Sensor <= 0) && (Core_mid_LSr_IP >= 0.02), + SET Core_mid_Light_Actuator = 0.02*Core_mid_Area/0.09290304, + ELSE, + SET Core_mid_Light_Actuator = NULL, + ENDIF; + +EnergyManagementSystem:ProgramCallingManager, + SET_Core_mid_Light_EMS_Program_Prog_Manager, !- Name + AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point + SET_Core_mid_Light_EMS_Program; !- Program Name 1 + +!- for zone "Core_top" + +EnergyManagementSystem:Sensor, + Core_top_LSr, !- Name + Core_top, !- Output:Variable or Output:Meter Index Key Name + Zone Lights Electric Power; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:Sensor, + Core_top_Occ_Sensor, !- Name + Core_top, !- Output:Variable or Output:Meter Index Key Name + People Occupant Count; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:InternalVariable, + Core_top_Area, !- Name + Core_top, !- Internal Data Index Key Name + Zone Floor Area; !- Internal Data Type + +EnergyManagementSystem:Actuator, + Core_top_Light_Actuator, !- Name + Core_top_lights, !- Actuated Component Unique Name + Lights, !- Actuated Component Type + Electric Power Level; !- Actuated Component Control Type + +EnergyManagementSystem:Program, + SET_Core_top_Light_EMS_Program, !- Name + SET Core_top_LSr_IP=0.093*Core_top_LSr/Core_top_Area, ! Calculate the actual LPD for each hour + IF (Core_top_Occ_Sensor <= 0) && (Core_top_LSr_IP >= 0.02), + SET Core_top_Light_Actuator = 0.02*Core_top_Area/0.09290304, + ELSE, + SET Core_top_Light_Actuator = NULL, + ENDIF; + +EnergyManagementSystem:ProgramCallingManager, + SET_Core_top_Light_EMS_Program_Prog_Manager, !- Name + AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point + SET_Core_top_Light_EMS_Program; !- Program Name 1 + +!- for zone "Perimeter_bot_ZN_3" + +EnergyManagementSystem:Sensor, + Perimeter_bot_ZN_3_LSr, !- Name + Perimeter_bot_ZN_3, !- Output:Variable or Output:Meter Index Key Name + Zone Lights Electric Power; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:Sensor, + Perimeter_bot_ZN_3_Occ_Sensor, !- Name + Perimeter_bot_ZN_3, !- Output:Variable or Output:Meter Index Key Name + People Occupant Count; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:InternalVariable, + Perimeter_bot_ZN_3_Area, !- Name + Perimeter_bot_ZN_3, !- Internal Data Index Key Name + Zone Floor Area; !- Internal Data Type + +EnergyManagementSystem:Actuator, + Perimeter_bot_ZN_3_Light_Actuator, !- Name + Perimeter_bot_ZN_3_lights, !- Actuated Component Unique Name + Lights, !- Actuated Component Type + Electric Power Level; !- Actuated Component Control Type + +EnergyManagementSystem:Program, + SET_Perimeter_bot_ZN_3_Light_EMS_Program, !- Name + SET Perimeter_bot_ZN_3_LSr_IP=0.093*Perimeter_bot_ZN_3_LSr/Perimeter_bot_ZN_3_Area, ! Calculate the actual LPD for each hour + IF (Perimeter_bot_ZN_3_Occ_Sensor <= 0) && (Perimeter_bot_ZN_3_LSr_IP >= 0.02), + SET Perimeter_bot_ZN_3_Light_Actuator = 0.02*Perimeter_bot_ZN_3_Area/0.09290304, + ELSE, + SET Perimeter_bot_ZN_3_Light_Actuator = NULL, + ENDIF; + +EnergyManagementSystem:ProgramCallingManager, + SET_Perimeter_bot_ZN_3_Light_EMS_Program_Prog_Manager, !- Name + AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point + SET_Perimeter_bot_ZN_3_Light_EMS_Program; !- Program Name 1 + +!- for zone "Perimeter_bot_ZN_2" + +EnergyManagementSystem:Sensor, + Perimeter_bot_ZN_2_LSr, !- Name + Perimeter_bot_ZN_2, !- Output:Variable or Output:Meter Index Key Name + Zone Lights Electric Power; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:Sensor, + Perimeter_bot_ZN_2_Occ_Sensor, !- Name + Perimeter_bot_ZN_2, !- Output:Variable or Output:Meter Index Key Name + People Occupant Count; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:InternalVariable, + Perimeter_bot_ZN_2_Area, !- Name + Perimeter_bot_ZN_2, !- Internal Data Index Key Name + Zone Floor Area; !- Internal Data Type + +EnergyManagementSystem:Actuator, + Perimeter_bot_ZN_2_Light_Actuator, !- Name + Perimeter_bot_ZN_2_lights, !- Actuated Component Unique Name + Lights, !- Actuated Component Type + Electric Power Level; !- Actuated Component Control Type + +EnergyManagementSystem:Program, + SET_Perimeter_bot_ZN_2_Light_EMS_Program, !- Name + SET Perimeter_bot_ZN_2_LSr_IP=0.093*Perimeter_bot_ZN_2_LSr/Perimeter_bot_ZN_2_Area, ! Calculate the actual LPD for each hour + IF (Perimeter_bot_ZN_2_Occ_Sensor <= 0) && (Perimeter_bot_ZN_2_LSr_IP >= 0.02), + SET Perimeter_bot_ZN_2_Light_Actuator = 0.02*Perimeter_bot_ZN_2_Area/0.09290304, + ELSE, + SET Perimeter_bot_ZN_2_Light_Actuator = NULL, + ENDIF; + +EnergyManagementSystem:ProgramCallingManager, + SET_Perimeter_bot_ZN_2_Light_EMS_Program_Prog_Manager, !- Name + AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point + SET_Perimeter_bot_ZN_2_Light_EMS_Program; !- Program Name 1 + +!- for zone "Perimeter_bot_ZN_1" + +EnergyManagementSystem:Sensor, + Perimeter_bot_ZN_1_LSr, !- Name + Perimeter_bot_ZN_1, !- Output:Variable or Output:Meter Index Key Name + Zone Lights Electric Power; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:Sensor, + Perimeter_bot_ZN_1_Occ_Sensor, !- Name + Perimeter_bot_ZN_1, !- Output:Variable or Output:Meter Index Key Name + People Occupant Count; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:InternalVariable, + Perimeter_bot_ZN_1_Area, !- Name + Perimeter_bot_ZN_1, !- Internal Data Index Key Name + Zone Floor Area; !- Internal Data Type + +EnergyManagementSystem:Actuator, + Perimeter_bot_ZN_1_Light_Actuator, !- Name + Perimeter_bot_ZN_1_lights, !- Actuated Component Unique Name + Lights, !- Actuated Component Type + Electric Power Level; !- Actuated Component Control Type + +EnergyManagementSystem:Program, + SET_Perimeter_bot_ZN_1_Light_EMS_Program, !- Name + SET Perimeter_bot_ZN_1_LSr_IP=0.093*Perimeter_bot_ZN_1_LSr/Perimeter_bot_ZN_1_Area, ! Calculate the actual LPD for each hour + IF (Perimeter_bot_ZN_1_Occ_Sensor <= 0) && (Perimeter_bot_ZN_1_LSr_IP >= 0.02), + SET Perimeter_bot_ZN_1_Light_Actuator = 0.02*Perimeter_bot_ZN_1_Area/0.09290304, + ELSE, + SET Perimeter_bot_ZN_1_Light_Actuator = NULL, + ENDIF; + +EnergyManagementSystem:ProgramCallingManager, + SET_Perimeter_bot_ZN_1_Light_EMS_Program_Prog_Manager, !- Name + AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point + SET_Perimeter_bot_ZN_1_Light_EMS_Program; !- Program Name 1 + +!- for zone "Perimeter_bot_ZN_4" + +EnergyManagementSystem:Sensor, + Perimeter_bot_ZN_4_LSr, !- Name + Perimeter_bot_ZN_4, !- Output:Variable or Output:Meter Index Key Name + Zone Lights Electric Power; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:Sensor, + Perimeter_bot_ZN_4_Occ_Sensor, !- Name + Perimeter_bot_ZN_4, !- Output:Variable or Output:Meter Index Key Name + People Occupant Count; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:InternalVariable, + Perimeter_bot_ZN_4_Area, !- Name + Perimeter_bot_ZN_4, !- Internal Data Index Key Name + Zone Floor Area; !- Internal Data Type + +EnergyManagementSystem:Actuator, + Perimeter_bot_ZN_4_Light_Actuator, !- Name + Perimeter_bot_ZN_4_lights, !- Actuated Component Unique Name + Lights, !- Actuated Component Type + Electric Power Level; !- Actuated Component Control Type + +EnergyManagementSystem:Program, + SET_Perimeter_bot_ZN_4_Light_EMS_Program, !- Name + SET Perimeter_bot_ZN_4_LSr_IP=0.093*Perimeter_bot_ZN_4_LSr/Perimeter_bot_ZN_4_Area, ! Calculate the actual LPD for each hour + IF (Perimeter_bot_ZN_4_Occ_Sensor <= 0) && (Perimeter_bot_ZN_4_LSr_IP >= 0.02), + SET Perimeter_bot_ZN_4_Light_Actuator = 0.02*Perimeter_bot_ZN_4_Area/0.09290304, + ELSE, + SET Perimeter_bot_ZN_4_Light_Actuator = NULL, + ENDIF; + +EnergyManagementSystem:ProgramCallingManager, + SET_Perimeter_bot_ZN_4_Light_EMS_Program_Prog_Manager, !- Name + AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point + SET_Perimeter_bot_ZN_4_Light_EMS_Program; !- Program Name 1 + +!- for zone "Perimeter_mid_ZN_3" + +EnergyManagementSystem:Sensor, + Perimeter_mid_ZN_3_LSr, !- Name + Perimeter_mid_ZN_3, !- Output:Variable or Output:Meter Index Key Name + Zone Lights Electric Power; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:Sensor, + Perimeter_mid_ZN_3_Occ_Sensor, !- Name + Perimeter_mid_ZN_3, !- Output:Variable or Output:Meter Index Key Name + People Occupant Count; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:InternalVariable, + Perimeter_mid_ZN_3_Area, !- Name + Perimeter_mid_ZN_3, !- Internal Data Index Key Name + Zone Floor Area; !- Internal Data Type + +EnergyManagementSystem:Actuator, + Perimeter_mid_ZN_3_Light_Actuator, !- Name + Perimeter_mid_ZN_3_lights, !- Actuated Component Unique Name + Lights, !- Actuated Component Type + Electric Power Level; !- Actuated Component Control Type + +EnergyManagementSystem:Program, + SET_Perimeter_mid_ZN_3_Light_EMS_Program, !- Name + SET Perimeter_mid_ZN_3_LSr_IP=0.093*Perimeter_mid_ZN_3_LSr/Perimeter_mid_ZN_3_Area, ! Calculate the actual LPD for each hour + IF (Perimeter_mid_ZN_3_Occ_Sensor <= 0) && (Perimeter_mid_ZN_3_LSr_IP >= 0.02), + SET Perimeter_mid_ZN_3_Light_Actuator = 0.02*Perimeter_mid_ZN_3_Area/0.09290304, + ELSE, + SET Perimeter_mid_ZN_3_Light_Actuator = NULL, + ENDIF; + +EnergyManagementSystem:ProgramCallingManager, + SET_Perimeter_mid_ZN_3_Light_EMS_Program_Prog_Manager, !- Name + AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point + SET_Perimeter_mid_ZN_3_Light_EMS_Program; !- Program Name 1 + +!- for zone "Perimeter_mid_ZN_2" + +EnergyManagementSystem:Sensor, + Perimeter_mid_ZN_2_LSr, !- Name + Perimeter_mid_ZN_2, !- Output:Variable or Output:Meter Index Key Name + Zone Lights Electric Power; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:Sensor, + Perimeter_mid_ZN_2_Occ_Sensor, !- Name + Perimeter_mid_ZN_2, !- Output:Variable or Output:Meter Index Key Name + People Occupant Count; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:InternalVariable, + Perimeter_mid_ZN_2_Area, !- Name + Perimeter_mid_ZN_2, !- Internal Data Index Key Name + Zone Floor Area; !- Internal Data Type + +EnergyManagementSystem:Actuator, + Perimeter_mid_ZN_2_Light_Actuator, !- Name + Perimeter_mid_ZN_2_lights, !- Actuated Component Unique Name + Lights, !- Actuated Component Type + Electric Power Level; !- Actuated Component Control Type + +EnergyManagementSystem:Program, + SET_Perimeter_mid_ZN_2_Light_EMS_Program, !- Name + SET Perimeter_mid_ZN_2_LSr_IP=0.093*Perimeter_mid_ZN_2_LSr/Perimeter_mid_ZN_2_Area, ! Calculate the actual LPD for each hour + IF (Perimeter_mid_ZN_2_Occ_Sensor <= 0) && (Perimeter_mid_ZN_2_LSr_IP >= 0.02), + SET Perimeter_mid_ZN_2_Light_Actuator = 0.02*Perimeter_mid_ZN_2_Area/0.09290304, + ELSE, + SET Perimeter_mid_ZN_2_Light_Actuator = NULL, + ENDIF; + +EnergyManagementSystem:ProgramCallingManager, + SET_Perimeter_mid_ZN_2_Light_EMS_Program_Prog_Manager, !- Name + AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point + SET_Perimeter_mid_ZN_2_Light_EMS_Program; !- Program Name 1 + +!- for zone "Perimeter_mid_ZN_1" + +EnergyManagementSystem:Sensor, + Perimeter_mid_ZN_1_LSr, !- Name + Perimeter_mid_ZN_1, !- Output:Variable or Output:Meter Index Key Name + Zone Lights Electric Power; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:Sensor, + Perimeter_mid_ZN_1_Occ_Sensor, !- Name + Perimeter_mid_ZN_1, !- Output:Variable or Output:Meter Index Key Name + People Occupant Count; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:InternalVariable, + Perimeter_mid_ZN_1_Area, !- Name + Perimeter_mid_ZN_1, !- Internal Data Index Key Name + Zone Floor Area; !- Internal Data Type + +EnergyManagementSystem:Actuator, + Perimeter_mid_ZN_1_Light_Actuator, !- Name + Perimeter_mid_ZN_1_lights, !- Actuated Component Unique Name + Lights, !- Actuated Component Type + Electric Power Level; !- Actuated Component Control Type + +EnergyManagementSystem:Program, + SET_Perimeter_mid_ZN_1_Light_EMS_Program, !- Name + SET Perimeter_mid_ZN_1_LSr_IP=0.093*Perimeter_mid_ZN_1_LSr/Perimeter_mid_ZN_1_Area, ! Calculate the actual LPD for each hour + IF (Perimeter_mid_ZN_1_Occ_Sensor <= 0) && (Perimeter_mid_ZN_1_LSr_IP >= 0.02), + SET Perimeter_mid_ZN_1_Light_Actuator = 0.02*Perimeter_mid_ZN_1_Area/0.09290304, + ELSE, + SET Perimeter_mid_ZN_1_Light_Actuator = NULL, + ENDIF; + +EnergyManagementSystem:ProgramCallingManager, + SET_Perimeter_mid_ZN_1_Light_EMS_Program_Prog_Manager, !- Name + AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point + SET_Perimeter_mid_ZN_1_Light_EMS_Program; !- Program Name 1 + +!- for zone "Perimeter_mid_ZN_4" + +EnergyManagementSystem:Sensor, + Perimeter_mid_ZN_4_LSr, !- Name + Perimeter_mid_ZN_4, !- Output:Variable or Output:Meter Index Key Name + Zone Lights Electric Power; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:Sensor, + Perimeter_mid_ZN_4_Occ_Sensor, !- Name + Perimeter_mid_ZN_4, !- Output:Variable or Output:Meter Index Key Name + People Occupant Count; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:InternalVariable, + Perimeter_mid_ZN_4_Area, !- Name + Perimeter_mid_ZN_4, !- Internal Data Index Key Name + Zone Floor Area; !- Internal Data Type + +EnergyManagementSystem:Actuator, + Perimeter_mid_ZN_4_Light_Actuator, !- Name + Perimeter_mid_ZN_4_lights, !- Actuated Component Unique Name + Lights, !- Actuated Component Type + Electric Power Level; !- Actuated Component Control Type + +EnergyManagementSystem:Program, + SET_Perimeter_mid_ZN_4_Light_EMS_Program, !- Name + SET Perimeter_mid_ZN_4_LSr_IP=0.093*Perimeter_mid_ZN_4_LSr/Perimeter_mid_ZN_4_Area, ! Calculate the actual LPD for each hour + IF (Perimeter_mid_ZN_4_Occ_Sensor <= 0) && (Perimeter_mid_ZN_4_LSr_IP >= 0.02), + SET Perimeter_mid_ZN_4_Light_Actuator = 0.02*Perimeter_mid_ZN_4_Area/0.09290304, + ELSE, + SET Perimeter_mid_ZN_4_Light_Actuator = NULL, + ENDIF; + +EnergyManagementSystem:ProgramCallingManager, + SET_Perimeter_mid_ZN_4_Light_EMS_Program_Prog_Manager, !- Name + AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point + SET_Perimeter_mid_ZN_4_Light_EMS_Program; !- Program Name 1 + +!- for zone "Perimeter_top_ZN_3" + +EnergyManagementSystem:Sensor, + Perimeter_top_ZN_3_LSr, !- Name + Perimeter_top_ZN_3, !- Output:Variable or Output:Meter Index Key Name + Zone Lights Electric Power; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:Sensor, + Perimeter_top_ZN_3_Occ_Sensor, !- Name + Perimeter_top_ZN_3, !- Output:Variable or Output:Meter Index Key Name + People Occupant Count; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:InternalVariable, + Perimeter_top_ZN_3_Area, !- Name + Perimeter_top_ZN_3, !- Internal Data Index Key Name + Zone Floor Area; !- Internal Data Type + +EnergyManagementSystem:Actuator, + Perimeter_top_ZN_3_Light_Actuator, !- Name + Perimeter_top_ZN_3_lights, !- Actuated Component Unique Name + Lights, !- Actuated Component Type + Electric Power Level; !- Actuated Component Control Type + +EnergyManagementSystem:Program, + SET_Perimeter_top_ZN_3_Light_EMS_Program, !- Name + SET Perimeter_top_ZN_3_LSr_IP=0.093*Perimeter_top_ZN_3_LSr/Perimeter_top_ZN_3_Area, ! Calculate the actual LPD for each hour + IF (Perimeter_top_ZN_3_Occ_Sensor <= 0) && (Perimeter_top_ZN_3_LSr_IP >= 0.02), + SET Perimeter_top_ZN_3_Light_Actuator = 0.02*Perimeter_top_ZN_3_Area/0.09290304, + ELSE, + SET Perimeter_top_ZN_3_Light_Actuator = NULL, + ENDIF; + +EnergyManagementSystem:ProgramCallingManager, + SET_Perimeter_top_ZN_3_Light_EMS_Program_Prog_Manager, !- Name + AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point + SET_Perimeter_top_ZN_3_Light_EMS_Program; !- Program Name 1 + +!- for zone "Perimeter_top_ZN_2" + +EnergyManagementSystem:Sensor, + Perimeter_top_ZN_2_LSr, !- Name + Perimeter_top_ZN_2, !- Output:Variable or Output:Meter Index Key Name + Zone Lights Electric Power; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:Sensor, + Perimeter_top_ZN_2_Occ_Sensor, !- Name + Perimeter_top_ZN_2, !- Output:Variable or Output:Meter Index Key Name + People Occupant Count; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:InternalVariable, + Perimeter_top_ZN_2_Area, !- Name + Perimeter_top_ZN_2, !- Internal Data Index Key Name + Zone Floor Area; !- Internal Data Type + +EnergyManagementSystem:Actuator, + Perimeter_top_ZN_2_Light_Actuator, !- Name + Perimeter_top_ZN_2_lights, !- Actuated Component Unique Name + Lights, !- Actuated Component Type + Electric Power Level; !- Actuated Component Control Type + +EnergyManagementSystem:Program, + SET_Perimeter_top_ZN_2_Light_EMS_Program, !- Name + SET Perimeter_top_ZN_2_LSr_IP=0.093*Perimeter_top_ZN_2_LSr/Perimeter_top_ZN_2_Area, ! Calculate the actual LPD for each hour + IF (Perimeter_top_ZN_2_Occ_Sensor <= 0) && (Perimeter_top_ZN_2_LSr_IP >= 0.02), + SET Perimeter_top_ZN_2_Light_Actuator = 0.02*Perimeter_top_ZN_2_Area/0.09290304, + ELSE, + SET Perimeter_top_ZN_2_Light_Actuator = NULL, + ENDIF; + +EnergyManagementSystem:ProgramCallingManager, + SET_Perimeter_top_ZN_2_Light_EMS_Program_Prog_Manager, !- Name + AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point + SET_Perimeter_top_ZN_2_Light_EMS_Program; !- Program Name 1 + +!- for zone "Perimeter_top_ZN_1" + +EnergyManagementSystem:Sensor, + Perimeter_top_ZN_1_LSr, !- Name + Perimeter_top_ZN_1, !- Output:Variable or Output:Meter Index Key Name + Zone Lights Electric Power; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:Sensor, + Perimeter_top_ZN_1_Occ_Sensor, !- Name + Perimeter_top_ZN_1, !- Output:Variable or Output:Meter Index Key Name + People Occupant Count; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:InternalVariable, + Perimeter_top_ZN_1_Area, !- Name + Perimeter_top_ZN_1, !- Internal Data Index Key Name + Zone Floor Area; !- Internal Data Type + +EnergyManagementSystem:Actuator, + Perimeter_top_ZN_1_Light_Actuator, !- Name + Perimeter_top_ZN_1_lights, !- Actuated Component Unique Name + Lights, !- Actuated Component Type + Electric Power Level; !- Actuated Component Control Type + +EnergyManagementSystem:Program, + SET_Perimeter_top_ZN_1_Light_EMS_Program, !- Name + SET Perimeter_top_ZN_1_LSr_IP=0.093*Perimeter_top_ZN_1_LSr/Perimeter_top_ZN_1_Area, ! Calculate the actual LPD for each hour + IF (Perimeter_top_ZN_1_Occ_Sensor <= 0) && (Perimeter_top_ZN_1_LSr_IP >= 0.02), + SET Perimeter_top_ZN_1_Light_Actuator = 0.02*Perimeter_top_ZN_1_Area/0.09290304, + ELSE, + SET Perimeter_top_ZN_1_Light_Actuator = NULL, + ENDIF; + +EnergyManagementSystem:ProgramCallingManager, + SET_Perimeter_top_ZN_1_Light_EMS_Program_Prog_Manager, !- Name + AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point + SET_Perimeter_top_ZN_1_Light_EMS_Program; !- Program Name 1 + +!- for zone "Perimeter_top_ZN_4" + +EnergyManagementSystem:Sensor, + Perimeter_top_ZN_4_LSr, !- Name + Perimeter_top_ZN_4, !- Output:Variable or Output:Meter Index Key Name + Zone Lights Electric Power; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:Sensor, + Perimeter_top_ZN_4_Occ_Sensor, !- Name + Perimeter_top_ZN_4, !- Output:Variable or Output:Meter Index Key Name + People Occupant Count; !- Output:Variable or Output:Meter Name + +EnergyManagementSystem:InternalVariable, + Perimeter_top_ZN_4_Area, !- Name + Perimeter_top_ZN_4, !- Internal Data Index Key Name + Zone Floor Area; !- Internal Data Type + +EnergyManagementSystem:Actuator, + Perimeter_top_ZN_4_Light_Actuator, !- Name + Perimeter_top_ZN_4_lights, !- Actuated Component Unique Name + Lights, !- Actuated Component Type + Electric Power Level; !- Actuated Component Control Type + +EnergyManagementSystem:Program, + SET_Perimeter_top_ZN_4_Light_EMS_Program, !- Name + SET Perimeter_top_ZN_4_LSr_IP=0.093*Perimeter_top_ZN_4_LSr/Perimeter_top_ZN_4_Area, ! Calculate the actual LPD for each hour + IF (Perimeter_top_ZN_4_Occ_Sensor <= 0) && (Perimeter_top_ZN_4_LSr_IP >= 0.02), + SET Perimeter_top_ZN_4_Light_Actuator = 0.02*Perimeter_top_ZN_4_Area/0.09290304, + ELSE, + SET Perimeter_top_ZN_4_Light_Actuator = NULL, + ENDIF; + +EnergyManagementSystem:ProgramCallingManager, + SET_Perimeter_top_ZN_4_Light_EMS_Program_Prog_Manager, !- Name + AfterPredictorAfterHVACManagers, !- EnergyPlus Model Calling Point + SET_Perimeter_top_ZN_4_Light_EMS_Program; !- Program Name 1 + + + + + diff --git a/tests/test_trnsys.py b/tests/test_trnsys.py index 85479c1..6b70c9f 100644 --- a/tests/test_trnsys.py +++ b/tests/test_trnsys.py @@ -1307,8 +1307,11 @@ def test_trnbuild_from_simple_idf(config): window_file = "W74-lib.dat" template_dir = os.path.join("translater", "ressources") window_filepath = os.path.join(template_dir, window_file) + # weather_file = os.path.join( + # "tests", "input_data", "CAN_QC_Montreal-McTavish.716120_CWEC2016.epw" + # ) weather_file = os.path.join( - "tests", "input_data", "CAN_QC_Montreal-McTavish.716120_CWEC2016.epw" + "tests", "input_data", "USA_NY_Buffalo.Niagara.Intl.AP.725280_TMY3.epw" ) # prepare args (key=value)f or EnergyPlus version to use, windows parameters,etc. @@ -1325,7 +1328,8 @@ def test_trnbuild_from_simple_idf(config): } # Path to IDF file - file = os.path.join("tests", "input_data", "trnsys", "simple_2_zone.idf") + # file = os.path.join("tests", "input_data", "trnsys", "simple_2_zone.idf") + file = os.path.join("tests", "input_data", "ASHRAE90.1_OfficeLarge_STD2016_Buffalo.idf") # Converts IDF to BUI convert_idf_to_trnbuild( @@ -1334,6 +1338,6 @@ def test_trnbuild_from_simple_idf(config): window_lib=window_filepath, template="tests/input_data/trnsys/NewFileTemplate.d18", trnsidf_exe="docker/trnsidf/trnsidf.exe", - schedule_as_input=False, + schedule_as_input=True, **kwargs_dict - ) + ) \ No newline at end of file diff --git a/translater/__init__.py b/translater/__init__.py index 84d67ed..547f7e3 100644 --- a/translater/__init__.py +++ b/translater/__init__.py @@ -6,13 +6,13 @@ ################################################################################ # Version of the package -__version__ = "1.0.3" +__version__ = "1.0.4" # warn if a newer version of translater is available from outdated import warn_if_outdated from .utils import warn_if_not_compatible -# warn_if_outdated("translater", __version__) +warn_if_outdated("translater", __version__) warn_if_not_compatible() from .utils import * diff --git a/translater/trnsys.py b/translater/trnsys.py index f937190..15b2171 100644 --- a/translater/trnsys.py +++ b/translater/trnsys.py @@ -448,6 +448,10 @@ def convert_idf_to_trnbuild( # T initial to b18 t_initial_to_b18(b18_lines, zones, schedules) + if schedule_as_input: + # Reduce number of schedules written as Inputs + reduce_schedule(b18_lines, lines, schedule_names) + # Save B18 file at output_folder if output_folder is None: # User did not provide an output folder path. We use the default setting @@ -462,6 +466,40 @@ def convert_idf_to_trnbuild( return return_path +def reduce_schedule(b18_lines, lines, schedule_names): + name_to_delete = [] + count = checkStr(b18_lines, "INPUTS_DESCRIPTION") + + # Search schedule names that are not used in the b18 file + for name in schedule_names: + bool_list = [name in line for line in b18_lines[count:]] + if not any(bool_list): + name_to_delete.append(name) + + # Delete the unused schedule names from the "INPUTS" line (in the T3D lines) + input_count = checkStr(lines, "I n p u t s") + input_descr_count = checkStr(lines, "INPUTS_DESCRIPTION") + input_lines = lines[input_count + 1 : input_descr_count-1] + for idx, line in enumerate(input_lines): + removed = [] + for name in name_to_delete: + if name in line: + input_lines[idx] = line.replace(name, "") + removed.append(name) + for rmv_name in removed: + name_to_delete.remove(rmv_name) + + # Remove "INPUTS" line from b18_lines and insert the "input_lines" from T3D file + # From where we just deleted the unused schedule names + del b18_lines[count - 2] + input_lines.reverse() + for line in input_lines: + line = line.replace(" ", " ") + line = line.replace(" ;", ";") + line = line.replace("!-", "") + b18_lines.insert(count - 2, line) + + def t_initial_to_b18(b18_lines, zones, schedules): for zone in zones: t_ini = schedules["sch_h_setpoint_" + zone.Name]["all values"][0] @@ -1778,7 +1816,7 @@ def _write_zone_buildingSurf_fenestrationSurf( # surface _relative_to_absolute(fenestrationSurf, incrX, incrY, incrZ) - # Round vertex to 4 decimal digit max + # Round vertex to 2 decimal digit max _round_vertex(fenestrationSurf) # Polygon from vector's window surface @@ -1860,7 +1898,7 @@ def _write_zone_buildingSurf_fenestrationSurf( ) raise NotImplementedError(msg) - # Round vertex to 4 decimal digit max + # Round vertex to 2 decimal digit max _round_vertex(buildingSurf) # Makes sure idf object key is not all upper string @@ -1968,7 +2006,7 @@ def _inverse_vertices_surf(buildingSurf, idf, outside_bound_surf, idfobject_key) ] = buildingSurf["Vertex_" + str(k) + "_Zcoordinate"] -def _round_vertex(surface, nbr_decimal=4): +def _round_vertex(surface, nbr_decimal=2): """Round vertex to the number of decimal (nbr_decimal) wanted Args: