city_retrofit/hub/config/configuration.ini

# These values are intended as configurable assumptions
[buildings]
max_location_distance_for_shared_walls = 5.0
min_coordinate = -1.7976931348623157e+308
max_coordinate = 1.7976931348623157e+308
comnet_lighting_latent = 0
comnet_lighting_convective = 0.5
comnet_lighting_radiant = 0.5
comnet_occupancy_sensible_convective = 0.9
comnet_occupancy_sensible_radiant = 0.1
comnet_plugs_latent = 0
comnet_plugs_convective = 0.75
comnet_plugs_radiant = 0.25
#W/m2K
convective_heat_transfer_coefficient_interior = 3.5
convective_heat_transfer_coefficient_exterior = 20
#W/mK
soil_conductivity = 3
#m
soil_thickness = 0.5
short_wave_reflectance = 0.3
move assumptions into configuration.ini 2020-06-05 12:24:03 -04:00			`# These values are intended as configurable assumptions`
Add max distance for adjacent buildings in the config file. If the distance is bigger than the given one it's not even checked for shared walls 2020-06-22 14:35:40 -04:00			`[buildings]`
eliminated many parameters from configuration.ini that will now depend on the workflow added example iso 52016-1:2017 added new weather format defined in iso 52016-1:2017 (xls) 2021-01-11 17:11:50 -05:00			`max_location_distance_for_shared_walls = 5.0`
created distance_between_points in geometry_helper.py, erased almost_equal in polyhedron points 2021-01-11 10:25:34 -05:00			`min_coordinate = -1.7976931348623157e+308`
testing building separation in storeys with the new configuration of geometry using polygons and polyhedrons (NOT working yet). 2021-03-25 09:11:42 -04:00			`max_coordinate = 1.7976931348623157e+308`
Added new values to configuration.ini for comnet usage 2021-11-11 17:28:28 -05:00			`comnet_lighting_latent = 0`
			`comnet_lighting_convective = 0.5`
			`comnet_lighting_radiant = 0.5`
			`comnet_occupancy_sensible_convective = 0.9`
			`comnet_occupancy_sensible_radiant = 0.1`
			`comnet_plugs_latent = 0`
			`comnet_plugs_convective = 0.75`
			`comnet_plugs_radiant = 0.25`
added soil layer to ground surfaces 2022-11-28 15:26:31 -05:00			`#W/m2K`
fixed bug saving values 2022-03-08 19:19:52 -05:00			`convective_heat_transfer_coefficient_interior = 3.5`
			`convective_heat_transfer_coefficient_exterior = 20`
added soil layer to ground surfaces 2022-11-28 15:26:31 -05:00			`#W/mK`
			`soil_conductivity = 3`
			`#m`
usage = retail in nrcan bug solved added default value to swr in sra exporter for those buildings without construction known 2023-03-16 11:43:13 -04:00			`soil_thickness = 0.5`
			`short_wave_reflectance = 0.3`