Small refactor.

Now energy plus don't raise and unexpected error when some exports aren't performed.

hub/exports/building_energy/idf.py

@@ -187,6 +187,8 @@ class Idf:
 
   def _add_infiltration_schedules(self, thermal_zone):
     _infiltration_schedules = []
+    if thermal_zone.thermal_control is None:
+      return
     for hvac_availability_schedule in thermal_zone.thermal_control.hvac_availability_schedules:
       _schedule = Schedule()
       _schedule.type = cte.INFILTRATION
@@ -337,13 +339,17 @@ class Idf:
                            )
 
   def _add_infiltration(self, thermal_zone, zone_name):
+
     for zone in self._idf.idfobjects["ZONE"]:
       if zone.Name == f'{zone_name}_infiltration':
         return
+    schedule = f'Infiltration schedules {thermal_zone.usage_name}'
+    if schedule not in self._idf.idfobjects[self._HOURLY_SCHEDULE]:
+      return
     self._idf.newidfobject(self._INFILTRATION,
                            Name=f'{zone_name}_infiltration',
                            Zone_or_ZoneList_Name=zone_name,
-                           Schedule_Name=f'Infiltration schedules {thermal_zone.usage_name}',
+                           Schedule_Name=schedule,
                            Design_Flow_Rate_Calculation_Method='AirChanges/Hour',
                            Air_Changes_per_Hour=thermal_zone.mechanical_air_change
                            )
@@ -378,6 +384,8 @@ class Idf:
     self._lod = self._city.level_of_detail.geometry
     for building in self._city.buildings:
       for internal_zone in building.internal_zones:
+        if internal_zone.thermal_zones is None:
+          continue
         for thermal_zone in internal_zone.thermal_zones:
           for thermal_boundary in thermal_zone.thermal_boundaries:
             self._add_construction(thermal_boundary)
@@ -388,19 +396,26 @@ class Idf:
           usage = thermal_zone.usage_name
           if building.name in self._target_buildings or building.name in self._adjacent_buildings:
             self._add_infiltration_schedules(thermal_zone)
-            self._add_schedules(usage, 'Occupancy', thermal_zone.occupancy.occupancy_schedules)
+            if thermal_zone.occupancy is not None:
-            self._add_schedules(usage, 'HVAC AVAIL', thermal_zone.thermal_control.hvac_availability_schedules)
+              self._add_schedules(usage, 'Occupancy', thermal_zone.occupancy.occupancy_schedules)
-            self._add_schedules(usage, 'Heating thermostat', thermal_zone.thermal_control.heating_set_point_schedules)
+              self._add_people_activity_level_schedules(thermal_zone)
-            self._add_schedules(usage, 'Cooling thermostat', thermal_zone.thermal_control.cooling_set_point_schedules)
+              self._add_occupancy(thermal_zone, building.name)
-            self._add_people_activity_level_schedules(thermal_zone)
+
+            if thermal_zone.thermal_control is not None:
+              self._add_schedules(usage, 'HVAC AVAIL', thermal_zone.thermal_control.hvac_availability_schedules)
+              self._add_schedules(usage, 'Heating thermostat', thermal_zone.thermal_control.heating_set_point_schedules)
+              self._add_schedules(usage, 'Cooling thermostat', thermal_zone.thermal_control.cooling_set_point_schedules)
 
             self._add_zone(thermal_zone, building.name)
             self._add_heating_system(thermal_zone, building.name)
             self._add_infiltration(thermal_zone, building.name)
-            self._add_occupancy(thermal_zone, building.name)
+
       if self._export_type == "Surfaces":
         if building.name in self._target_buildings or building.name in self._adjacent_buildings:
-          self._add_surfaces(building, building.name)
+          if building.internal_zones[0].thermal_zones is not None:
+            self._add_surfaces(building, building.name)
+          else:
+            self._add_pure_geometry(building, building.name)
         else:
           self._add_shading(building)
       else:
@@ -478,7 +493,34 @@ class Idf:
                              Diffuse_Solar_Reflectance_of_Unglazed_Part_of_Shading_Surface=solar_reflectance,
                              Fraction_of_Shading_Surface_That_Is_Glazed=0)
 
-    # todo: Add properties for that name
+  def _add_pure_geometry(self, building, zone_name):
+    for surface in building.surfaces:
+      idf_surface_type = self.idf_surfaces[surface.type]
+      outside_boundary_condition = 'Outdoors'
+      sun_exposure = 'SunExposed'
+      wind_exposure = 'WindExposed'
+      if surface.type == cte.GROUND:
+        outside_boundary_condition = 'Ground'
+        sun_exposure = 'NoSun'
+        wind_exposure = 'NoWind'
+      idf_surface = self._idf.newidfobject(self._SURFACE, Name=f'{surface.name}',
+                                       Surface_Type=idf_surface_type,
+                                       Zone_Name=zone_name,
+                                       Outside_Boundary_Condition=outside_boundary_condition,
+                                       Sun_Exposure=sun_exposure,
+                                       Wind_Exposure=wind_exposure)
+      coordinates = self._matrix_to_list(surface.solid_polygon.coordinates,
+                                         self._city.lower_corner)
+      idf_surface.setcoords(coordinates)
+    if self._lod >= 3:
+      for internal_zone in building.internal_zones:
+        for thermal_zone in internal_zone.thermal_zones:
+          for boundary in thermal_zone.thermal_boundaries:
+            self._add_windows_by_vertices(boundary)
+    else:
+      # idf only allows setting wwr for external walls
+      wwr = 0
+      self._idf.set_wwr(wwr)
 
   def _add_surfaces(self, building, zone_name):
     for internal_zone in building.internal_zones:
@@ -505,7 +547,6 @@ class Idf:
                                            Wind_Exposure=wind_exposure)
           coordinates = self._matrix_to_list(boundary.parent_surface.solid_polygon.coordinates,
                                              self._city.lower_corner)
-
           surface.setcoords(coordinates)
 
     if self._lod >= 3:

hub/unittests/test_exports.py

@@ -106,13 +106,12 @@ class TestExports(TestCase):
                            path=file_path,
                            function_to_hub=Dictionaries().alkis_function_to_hub_function).city
     self.assertIsNotNone(city, 'city is none')
-    ConstructionFactory('nrcan', city=city)
+    # EnergyBuildingsExportsFactory('idf', city, self._output_path).export()
-    ConstructionFactory('nrcan', city).enrich()
+    # ConstructionFactory('nrcan', city).enrich()
+    # EnergyBuildingsExportsFactory('idf', city, self._output_path).export()
     UsageFactory('nrcan', city).enrich()
     try:
       EnergyBuildingsExportsFactory('idf', city, self._output_path).export()
-      EnergyBuildingsExportsFactory('idf', city, self._output_path,
-                                    target_buildings=['gml_1066158', 'gml_1066159']).export()
     except Exception:
       self.fail("Idf ExportsFactory raised ExceptionType unexpectedly!")
 

setup.py

@@ -5,13 +5,12 @@ from distutils.util import convert_path
 import pkg_resources
 from setuptools import setup
 
-with pathlib.Path('hub/requirements.txt').open() as r:
+with pathlib.Path('requirements.txt').open() as r:
     install_requires = [
         str(requirement)
         for requirement
         in pkg_resources.parse_requirements(r)
     ]
-
 install_requires.append('setuptools')
 
 main_ns = {}
@@ -82,7 +81,7 @@ setup(
               ],
     setup_requires=install_requires,
     data_files=[
-        ('hub', glob.glob('hub/requirements.txt')),
+        ('hub', glob.glob('requirements.txt')),
         ('hub/config', glob.glob('hub/config/*.ini')),
         ('hub/catalog_factories/greenery/ecore_greenery', glob.glob('hub/catalog_factories/greenery/ecore_greenery/*.ecore')),
         ('hub/data/construction.', glob.glob('hub/data/construction/*')),