s_ranjbar/system_assignation
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main_branch
system_assignation/out_files/Montreal_tbl.csv

635 lines
35 KiB
Plaintext
Raw Permalink Normal View History

an attribute (heating_consumption_disaggregated) is added to building.py
2024-01-18 14:25:08 -05:00
Program Version:,EnergyPlus, Version 9.5.0-de239b2e5f, YMD=2024.01.18 14:11
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
Tabular Output Report in Format: ,Comma
Building:,Buildings in b'Montreal'
Environment:,RUN PERIOD 1 ** Montreal Int'l PQ CAN WYEC2-B-94792 WMO#=716270
----------------------------------------------------------------------------------------------------
REPORT:,Annual Building Utility Performance Summary
FOR:,Entire Facility
Values gathered over 8760.00 hours
Site and Source Energy
,,Total Energy [kWh],Energy Per Total Building Area [kWh/m2],Energy Per Conditioned Building Area [kWh/m2]
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Total Site Energy,254015.03,821.95,821.95
,Net Site Energy,254015.03,821.95,821.95
,Total Source Energy,820655.39,2655.52,2655.52
,Net Source Energy,820655.39,2655.52,2655.52
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
Site to Source Energy Conversion Factors
,,Site=>Source Conversion Factor
,Electricity,3.167
,Natural Gas,1.084
,District Cooling,1.056
,District Heating,3.613
,Steam,1.200
,Gasoline,1.050
,Diesel,1.050
,Coal,1.050
,Fuel Oil No 1,1.050
,Fuel Oil No 2,1.050
,Propane,1.050
,Other Fuel 1,1.000
,Other Fuel 2,1.000
Building Area
,,Area [m2]
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Total Building Area,309.04
,Net Conditioned Building Area,309.04
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
,Unconditioned Building Area,0.00
End Uses
,,Electricity [kWh],Natural Gas [kWh],Gasoline [kWh],Diesel [kWh],Coal [kWh],Fuel Oil No 1 [kWh],Fuel Oil No 2 [kWh],Propane [kWh],Other Fuel 1 [kWh],Other Fuel 2 [kWh],District Cooling [kWh],District Heating [kWh],Water [m3]
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Heating,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,114133.39,0.00
,Cooling,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,32461.74,0.00,0.00
,Interior Lighting,11659.74,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
,Exterior Lighting,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Interior Equipment,20063.83,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
,Exterior Equipment,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Fans,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Pumps,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Heat Rejection,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Humidification,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Heat Recovery,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Water Systems,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,75696.33,1068.88
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
,Refrigeration,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Generators,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,,,,,,,,,,,,,,
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Total End Uses,31723.57,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,32461.74,189829.73,1068.88
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
Note: District heat appears to be the principal heating source based on energy usage.
End Uses By Subcategory
,,Subcategory,Electricity [kWh],Natural Gas [kWh],Gasoline [kWh],Diesel [kWh],Coal [kWh],Fuel Oil No 1 [kWh],Fuel Oil No 2 [kWh],Propane [kWh],Other Fuel 1 [kWh],Other Fuel 2 [kWh],District Cooling [kWh],District Heating [kWh],Water [m3]
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Heating,General,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,114133.39,0.00
,Cooling,General,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,32461.74,0.00,0.00
,Interior Lighting,ELECTRIC EQUIPMENT#175785#GeneralLights,5260.06,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,,ELECTRIC EQUIPMENT#176293#GeneralLights,4157.54,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,,ELECTRIC EQUIPMENT#182393#GeneralLights,2242.14,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
,Exterior Lighting,General,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Interior Equipment,ELECTRIC EQUIPMENT#175785#InteriorEquipment,9051.40,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,,ELECTRIC EQUIPMENT#176293#InteriorEquipment,7154.20,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,,ELECTRIC EQUIPMENT#182393#InteriorEquipment,3858.22,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
,Exterior Equipment,General,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Fans,Ventilation (simple),0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Pumps,General,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Heat Rejection,General,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Humidification,General,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Heat Recovery,General,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Water Systems,DHW 175785,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,34148.92,482.20
,,DHW 176293,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,26991.20,381.13
,,DHW 182393,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,14556.22,205.54
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
,Refrigeration,General,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Generators,General,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
Normalized Metrics
Utility Use Per Conditioned Floor Area
,,Electricity Intensity [kWh/m2],Natural Gas Intensity [kWh/m2],Gasoline Intensity [kWh/m2],Diesel Intensity [kWh/m2],Coal Intensity [kWh/m2],Fuel Oil No 1 Intensity [kWh/m2],Fuel Oil No 2 Intensity [kWh/m2],Propane Intensity [kWh/m2],Other Fuel 1 Intensity [kWh/m2],Other Fuel 2 Intensity [kWh/m2],District Cooling Intensity [kWh/m2],District Heating Intensity [kWh/m2],Water Intensity [m3/m2]
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Lighting,37.73,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,HVAC,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,105.04,614.26,3.46
,Other,64.92,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Total,102.65,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,105.04,614.26,3.46
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
Utility Use Per Total Floor Area
,,Electricity Intensity [kWh/m2],Natural Gas Intensity [kWh/m2],Gasoline Intensity [kWh/m2],Diesel Intensity [kWh/m2],Coal Intensity [kWh/m2],Fuel Oil No 1 Intensity [kWh/m2],Fuel Oil No 2 Intensity [kWh/m2],Propane Intensity [kWh/m2],Other Fuel 1 Intensity [kWh/m2],Other Fuel 2 Intensity [kWh/m2],District Cooling Intensity [kWh/m2],District Heating Intensity [kWh/m2],Water Intensity [m3/m2]
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Lighting,37.73,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,HVAC,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,105.04,614.26,3.46
,Other,64.92,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Total,102.65,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,105.04,614.26,3.46
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
Electric Loads Satisfied
,,Electricity [kWh],Percent Electricity [%]
,Fuel-Fired Power Generation,0.000,0.00
,High Temperature Geothermal*,0.000,0.00
,Photovoltaic Power,0.000,0.00
,Wind Power,0.000,0.00
,Power Conversion,0.000,0.00
,Net Decrease in On-Site Storage,0.000,0.00
,Total On-Site Electric Sources,0.000,0.00
,,,
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Electricity Coming From Utility,31723.568,100.00
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
,Surplus Electricity Going To Utility,0.000,0.00
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Net Electricity From Utility,31723.568,100.00
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
,,,
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Total On-Site and Utility Electric Sources,31723.568,100.00
,Total Electricity End Uses,31723.568,100.00
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
On-Site Thermal Sources
,,Heat [kWh],Percent Heat [%]
,Water-Side Heat Recovery,0.00,
,Air to Air Heat Recovery for Cooling,0.00,
,Air to Air Heat Recovery for Heating,0.00,
,High-Temperature Geothermal*,0.00,
,Solar Water Thermal,0.00,
,Solar Air Thermal,0.00,
,Total On-Site Thermal Sources,0.00,
Water Source Summary
,,Water [m3],Percent Water [%]
,Rainwater Collection,0.00,0.00
,Condensate Collection,0.00,0.00
,Groundwater Well,0.00,0.00
,Total On Site Water Sources,0.00,0.00
,-,-,-
,Initial Storage,0.00,0.00
,Final Storage,0.00,0.00
,Change in Storage,0.00,0.00
,-,-,-
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Water Supplied by Utility,1068.88,100.00
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
,-,-,-
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Total On Site, Change in Storage, and Utility Water Sources,1068.88,100.00
,Total Water End Uses,1068.88,100.00
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
Setpoint Not Met Criteria
,,Degrees [deltaC]
,Tolerance for Zone Heating Setpoint Not Met Time,0.20
,Tolerance for Zone Cooling Setpoint Not Met Time,0.20
Comfort and Setpoint Not Met Summary
,,Facility [Hours]
,Time Setpoint Not Met During Occupied Heating,0.00
,Time Setpoint Not Met During Occupied Cooling,0.00
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Time Not Comfortable Based on Simple ASHRAE 55-2004,5311.25
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
Note 1: An asterisk (*) indicates that the feature is not yet implemented.
----------------------------------------------------------------------------------------------------
REPORT:,Input Verification and Results Summary
FOR:,Entire Facility
General
,,Value
an attribute (heating_consumption_disaggregated) is added to building.py
2024-01-18 14:25:08 -05:00
,Program Version and Build,EnergyPlus, Version 9.5.0-de239b2e5f, YMD=2024.01.18 14:11
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
,RunPeriod,RUN PERIOD 1
,Weather File,Montreal Int'l PQ CAN WYEC2-B-94792 WMO#=716270
,Latitude [deg],45.47
,Longitude [deg],-73.8
,Elevation [m],36.00
,Time Zone,-5.0
,North Axis Angle [deg],0.00
,Rotation for Appendix G [deg],0.00
,Hours Simulated [hrs],8760.00
ENVELOPE
Window-Wall Ratio
,,Total,North (315 to 45 deg),East (45 to 135 deg),South (135 to 225 deg),West (225 to 315 deg)
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Gross Wall Area [m2],1077.40,327.00,209.46,326.62,214.31
,Above Ground Wall Area [m2],1077.40,327.00,209.46,326.62,214.31
,Window Opening Area [m2],215.26,65.34,41.85,65.26,42.82
,Gross Window-Wall Ratio [%],19.98,19.98,19.98,19.98,19.98
,Above Ground Window-Wall Ratio [%],19.98,19.98,19.98,19.98,19.98
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
Conditioned Window-Wall Ratio
,,Total,North (315 to 45 deg),East (45 to 135 deg),South (135 to 225 deg),West (225 to 315 deg)
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Gross Wall Area [m2],1077.40,327.00,209.46,326.62,214.31
,Above Ground Wall Area [m2],1077.40,327.00,209.46,326.62,214.31
,Window Opening Area [m2],215.26,65.34,41.85,65.26,42.82
,Gross Window-Wall Ratio [%],19.98,19.98,19.98,19.98,19.98
,Above Ground Window-Wall Ratio [%],19.98,19.98,19.98,19.98,19.98
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
Skylight-Roof Ratio
,,Total
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Gross Roof Area [m2],309.04
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
,Skylight Area [m2],0.00
,Skylight-Roof Ratio [%],0.00
PERFORMANCE
Zone Summary
,,Area [m2],Conditioned (Y/N),Part of Total Floor Area (Y/N),Volume [m3],Multipliers,Above Ground Gross Wall Area [m2],Underground Gross Wall Area [m2],Window Glass Area [m2],Opening Area [m2],Lighting [W/m2],People [m2 per person],Plug and Process [W/m2]
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,175785,116.93,Yes,Yes,1403.17,1.00,410.07,0.00,81.93,81.93,22.0080,6.25,20.0073
,176293,92.42,Yes,Yes,1109.06,1.00,326.92,0.00,65.32,65.32,22.0080,6.25,20.0073
,182393,99.69,Yes,Yes,797.48,1.00,340.41,0.00,68.01,68.01,11.0040,12.50,10.0036
,Total,309.04,,,3309.71,,1077.40,0.00,215.26,215.26,18.4585,7.45,16.7804
,Conditioned Total,309.04,,,3309.71,,1077.40,0.00,215.26,215.26,18.4585,7.45,16.7804
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
,Unconditioned Total,0.00,,,0.00,,0.00,0.00,0.00,0.00,,,
,Not Part of Total,0.00,,,0.00,,0.00,0.00,0.00,0.00,,,
----------------------------------------------------------------------------------------------------
REPORT:,Demand End Use Components Summary
FOR:,Entire Facility
End Uses
,,Electricity [W],Natural Gas [W],Gasoline [W],Diesel [W],Coal [W],Fuel Oil No 1 [W],Fuel Oil No 2 [W],Propane [W],Other Fuel 1 [W],Other Fuel 2 [W],District Cooling [W],District Heating [W],Water [m3/s]
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Time of Peak,01-JAN-19:15,-,-,-,-,-,-,-,-,-,20-JUL-16:30,04-FEB-07:15,10-AUG-16:15
,Heating,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,72233.34,0.00
,Cooling,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,45602.66,0.00,0.00
,Interior Lighting,5133.93,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
,Exterior Lighting,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Interior Equipment,4667.21,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
,Exterior Equipment,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Fans,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Pumps,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Heat Rejection,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Humidification,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Heat Recovery,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Water Systems,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,20682.68,0.00
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
,Refrigeration,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Generators,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,,,,,,,,,,,,,,
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Total End Uses,9801.15,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,45602.66,92916.02,0.00
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
End Uses By Subcategory
,,Subcategory,Electricity [W],Natural Gas [W],Gasoline [W],Diesel [W],Coal [W],Fuel Oil No 1 [W],Fuel Oil No 2 [W],Propane [W],Other Fuel 1 [W],Other Fuel 2 [W],District Cooling [W],District Heating [W],Water [m3/s]
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Heating,General,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,72233.34,0.00
,Cooling,General,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,45602.66,0.00,0.00
,Interior Lighting,ELECTRIC EQUIPMENT#175785#GeneralLights,2316.07,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,,ELECTRIC EQUIPMENT#176293#GeneralLights,1830.62,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,,ELECTRIC EQUIPMENT#182393#GeneralLights,987.24,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
,Exterior Lighting,General,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Interior Equipment,ELECTRIC EQUIPMENT#175785#InteriorEquipment,2105.52,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,,ELECTRIC EQUIPMENT#176293#InteriorEquipment,1664.20,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,,ELECTRIC EQUIPMENT#182393#InteriorEquipment,897.49,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
,Exterior Equipment,General,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Fans,Ventilation (simple),0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Pumps,General,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Heat Rejection,General,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Humidification,General,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Heat Recovery,General,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Water Systems,DHW 175785,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,9330.58,0.00
,,DHW 176293,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,7374.87,0.00
,,DHW 182393,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,3977.23,0.00
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
,Refrigeration,General,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
,Generators,General,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
----------------------------------------------------------------------------------------------------
REPORT:,Component Sizing Summary
FOR:,Entire Facility
----------------------------------------------------------------------------------------------------
REPORT:,Adaptive Comfort Summary
FOR:,Entire Facility
Time Not Meeting the Adaptive Comfort Models during Occupied Hours
,,ASHRAE55 90% Acceptability Limits [Hours],ASHRAE55 80% Acceptability Limits [Hours],CEN15251 Category I Acceptability Limits [Hours],CEN15251 Category II Acceptability Limits [Hours],CEN15251 Category III Acceptability Limits [Hours]
----------------------------------------------------------------------------------------------------
REPORT:,Climatic Data Summary
FOR:,Entire Facility
SizingPeriod:DesignDay
,,Maximum Dry Bulb [C],Daily Temperature Range [deltaC],Humidity Value,Humidity Type,Wind Speed [m/s],Wind Direction
,None,,,,,,
Weather Statistics File
,,Value
,None,
----------------------------------------------------------------------------------------------------
REPORT:,Envelope Summary
FOR:,Entire Facility
Opaque Exterior
,,Construction,Reflectance,U-Factor with Film [W/m2-K],U-Factor no Film [W/m2-K],Gross Area [m2],Net Area [m2],Azimuth [deg],Tilt [deg],Cardinal Direction
an attribute (heating_consumption_disaggregated) is added to building.py
2024-01-18 14:25:08 -05:00
,FF11F32E-61F9-4CEB-A28E-E9D8A2D21D7A,1981_1990_6,0.40,0.644,0.713,79.35,63.50,89.98,90.00,E
,3B6D9D89-A422-445A-B305-4E9D2F952782,1981_1990_6,0.40,0.644,0.713,1.88,1.50,270.07,90.00,W
,9DCD5D84-78DF-4DA5-80C4-FAE17544226E,1981_1990_6,0.40,0.644,0.713,38.53,30.83,0.07,90.00,N
,C8CD208F-797F-428F-94DC-277ADC9EF001,1981_1990_6,0.40,0.644,0.713,77.98,62.40,269.91,90.00,W
,1B2839C9-4131-44CA-BD66-B4F56F1F1306,1981_1990_6,0.40,0.644,0.713,212.34,169.91,179.99,90.00,S
,6ACF7617-7D20-4059-916F-A322696BF7D6,1981_1990_6,0.40,0.639,0.713,116.93,116.93,359.99,180.00,
,C17F7386-D2BC-4D4A-B05A-E846AAABA4C3,1981_1990_6,0.40,0.649,0.713,116.93,116.93,0.13,0.00,
,F7A66C0B-F3E1-46C4-9AFE-F040250343B2,1981_1990_6,0.40,0.644,0.713,76.55,61.25,89.98,90.00,E
,673F9DDD-64F1-4F17-AD3B-320A0F77383B,1981_1990_6,0.40,0.644,0.713,173.82,139.09,0.13,90.00,N
,F0E8F86A-0DC1-4E31-B33E-3562FB8B2BDC,1981_1990_6,0.40,0.644,0.713,76.55,61.25,270.04,90.00,W
,7F337640-75A0-437B-8C4F-6EC6A6B647DF,1981_1990_6,0.40,0.639,0.713,92.42,92.42,0.13,180.00,
,69118BC1-AC76-440F-9C42-F25C672CE2F6,1981_1990_6,0.40,0.649,0.713,92.42,92.42,0.13,0.00,
,79EAC576-A260-4143-83B0-32CF204BBE7B,1981_1990_6,0.40,0.644,0.713,3.22,2.58,91.08,90.00,E
,A43B5153-DA22-4FD3-A4FC-ED018BE3F5F0,1981_1990_6,0.40,0.644,0.713,106.72,85.40,2.33,90.00,N
,EA75342E-1CCC-4A1D-9AE3-56FFEA395133,1981_1990_6,0.40,0.644,0.713,7.94,6.35,1.96,90.00,N
,48A796FD-5D1F-463D-9357-C9E2182110A4,1981_1990_6,0.40,0.644,0.713,57.91,46.34,270.12,90.00,W
,13EA4940-36E8-4E27-87EB-55C74E690355,1981_1990_6,0.40,0.644,0.713,114.28,91.44,180.13,90.00,S
,958929BB-ACD4-4629-AB9F-B6984E758263,1981_1990_6,0.40,0.644,0.713,50.34,40.28,90.40,90.00,E
,6E6AFC12-5493-40C0-B7E5-DA42F550F2B5,1981_1990_6,0.40,0.639,0.713,99.69,99.69,270.40,180.00,
,0B62F37E-EDEC-4014-A6D4-01279F8A3493,1981_1990_6,0.40,0.649,0.713,99.69,99.69,91.08,0.00,
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
Opaque Interior
,,Construction,Reflectance,U-Factor with Film [W/m2-K],U-Factor no Film [W/m2-K],Gross Area [m2],Net Area [m2],Azimuth [deg],Tilt [deg],Cardinal Direction
an attribute (heating_consumption_disaggregated) is added to building.py
2024-01-18 14:25:08 -05:00
,4FA50238-068D-4E20-A2BA-8A5A0A93B796,1981_1990_6,0.40,0.609,0.713,173.90,173.90,0.13,90.00,N
,DAD33850-1CAC-42D6-BABA-76AA1E6E4A4D,1981_1990_6,0.40,0.609,0.713,173.90,173.90,180.13,90.00,S
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
Exterior Fenestration
,,Construction,Glass Area [m2],Frame Area [m2],Divider Area [m2],Area of One Opening [m2],Area of Multiplied Openings [m2],Glass U-Factor [W/m2-K],Glass SHGC,Glass Visible Transmittance,Frame Conductance [W/m2-K],Divider Conductance [W/m2-K],Shade Control,Parent Surface,Azimuth [deg],Tilt [deg],Cardinal Direction
an attribute (heating_consumption_disaggregated) is added to building.py
2024-01-18 14:25:08 -05:00
,FF11F32E-61F9-4CEB-A28E-E9D8A2D21D7A WINDOW,WINDOW_CONSTRUCTION_1,15.85,0.00,0.00,15.85,15.85,2.954,0.391,0.305,,,No,FF11F32E-61F9-4CEB-A28E-E9D8A2D21D7A,89.98,90.00,E
,3B6D9D89-A422-445A-B305-4E9D2F952782 WINDOW,WINDOW_CONSTRUCTION_1,0.37,0.00,0.00,0.37,0.37,2.954,0.391,0.305,,,No,3B6D9D89-A422-445A-B305-4E9D2F952782,270.07,90.00,W
,9DCD5D84-78DF-4DA5-80C4-FAE17544226E WINDOW,WINDOW_CONSTRUCTION_1,7.70,0.00,0.00,7.70,7.70,2.954,0.391,0.305,,,No,9DCD5D84-78DF-4DA5-80C4-FAE17544226E,0.07,90.00,N
,C8CD208F-797F-428F-94DC-277ADC9EF001 WINDOW,WINDOW_CONSTRUCTION_1,15.58,0.00,0.00,15.58,15.58,2.954,0.391,0.305,,,No,C8CD208F-797F-428F-94DC-277ADC9EF001,269.91,90.00,W
,1B2839C9-4131-44CA-BD66-B4F56F1F1306 WINDOW,WINDOW_CONSTRUCTION_1,42.43,0.00,0.00,42.43,42.43,2.954,0.391,0.305,,,No,1B2839C9-4131-44CA-BD66-B4F56F1F1306,179.99,90.00,S
,F7A66C0B-F3E1-46C4-9AFE-F040250343B2 WINDOW,WINDOW_CONSTRUCTION_1,15.29,0.00,0.00,15.29,15.29,2.954,0.391,0.305,,,No,F7A66C0B-F3E1-46C4-9AFE-F040250343B2,89.98,90.00,E
,673F9DDD-64F1-4F17-AD3B-320A0F77383B WINDOW,WINDOW_CONSTRUCTION_1,34.73,0.00,0.00,34.73,34.73,2.954,0.391,0.305,,,No,673F9DDD-64F1-4F17-AD3B-320A0F77383B,0.13,90.00,N
,F0E8F86A-0DC1-4E31-B33E-3562FB8B2BDC WINDOW,WINDOW_CONSTRUCTION_1,15.29,0.00,0.00,15.29,15.29,2.954,0.391,0.305,,,No,F0E8F86A-0DC1-4E31-B33E-3562FB8B2BDC,270.04,90.00,W
,79EAC576-A260-4143-83B0-32CF204BBE7B WINDOW,WINDOW_CONSTRUCTION_1,0.64,0.00,0.00,0.64,0.64,2.954,0.391,0.305,,,No,79EAC576-A260-4143-83B0-32CF204BBE7B,91.08,90.00,E
,A43B5153-DA22-4FD3-A4FC-ED018BE3F5F0 WINDOW,WINDOW_CONSTRUCTION_1,21.32,0.00,0.00,21.32,21.32,2.954,0.391,0.305,,,No,A43B5153-DA22-4FD3-A4FC-ED018BE3F5F0,2.33,90.00,N
,EA75342E-1CCC-4A1D-9AE3-56FFEA395133 WINDOW,WINDOW_CONSTRUCTION_1,1.59,0.00,0.00,1.59,1.59,2.954,0.391,0.305,,,No,EA75342E-1CCC-4A1D-9AE3-56FFEA395133,1.96,90.00,N
,48A796FD-5D1F-463D-9357-C9E2182110A4 WINDOW,WINDOW_CONSTRUCTION_1,11.57,0.00,0.00,11.57,11.57,2.954,0.391,0.305,,,No,48A796FD-5D1F-463D-9357-C9E2182110A4,270.12,90.00,W
,13EA4940-36E8-4E27-87EB-55C74E690355 WINDOW,WINDOW_CONSTRUCTION_1,22.83,0.00,0.00,22.83,22.83,2.954,0.391,0.305,,,No,13EA4940-36E8-4E27-87EB-55C74E690355,180.13,90.00,S
,958929BB-ACD4-4629-AB9F-B6984E758263 WINDOW,WINDOW_CONSTRUCTION_1,10.06,0.00,0.00,10.06,10.06,2.954,0.391,0.305,,,No,958929BB-ACD4-4629-AB9F-B6984E758263,90.40,90.00,E
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Total or Average,,,,,,215.26,2.954,0.391,0.305,,,,,,,
,North Total or Average,,,,,,65.34,2.954,0.391,0.305,,,,,,,
,Non-North Total or Average,,,,,,149.93,2.954,0.391,0.305,,,,,,,
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
Interior Fenestration
,,Construction,Area of One Opening [m2],Area of Openings [m2],Glass U-Factor [W/m2-K],Glass SHGC,Glass Visible Transmittance,Parent Surface
,Total or Average,,,0.00,-,-,-,
Exterior Door
,,Construction,U-Factor with Film [W/m2-K],U-Factor no Film [W/m2-K],Gross Area [m2],Parent Surface
,None,,,,,
Interior Door
,,Construction,U-Factor with Film [W/m2-K],U-Factor no Film [W/m2-K],Gross Area [m2],Parent Surface
,None,,,,,
----------------------------------------------------------------------------------------------------
REPORT:,Lighting Summary
FOR:,Entire Facility
Interior Lighting
,,Zone,Lighting Power Density [W/m2],Zone Area [m2],Total Power [W],End Use Subcategory,Schedule Name,Scheduled Hours/Week [hr],Hours/Week > 1% [hr],Full Load Hours/Week [hr],Return Air Fraction,Conditioned (Y/N),Consumption [kWh]
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,175785_LIGHTS,175785,22.0080,116.93,2573.42,ELECTRIC EQUIPMENT#175785#GeneralLights,LIGHTING SCHEDULES 100-MULTI-UNIT RESIDENTIAL BUILDING,39.20,63.00,39.20,0.0000,Y,5259.87
,176293_LIGHTS,176293,22.0080,92.42,2034.02,ELECTRIC EQUIPMENT#176293#GeneralLights,LIGHTING SCHEDULES 100-MULTI-UNIT RESIDENTIAL BUILDING,39.20,63.00,39.20,0.0000,Y,4157.39
,182393_LIGHTS,182393,11.0040,99.69,1096.94,ELECTRIC EQUIPMENT#182393#GeneralLights,LIGHTING SCHEDULES 100-MULTI-UNIT RESIDENTIAL BUILDING,39.20,63.00,39.20,0.0000,Y,2242.06
,Interior Lighting Total,,18.4585,309.04,5704.37,,,,,,,,11659.32
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
Daylighting
,,Zone,Control Name,Daylighting Method,Control Type,Fraction Controlled,Lighting Installed in Zone [W],Lighting Controlled [W]
,None,,,,,,,
Exterior Lighting
,,Total Watts,Astronomical Clock/Schedule,Schedule Name,Scheduled Hours/Week [hr],Hours/Week > 1% [hr],Full Load Hours/Week [hr],Consumption [kWh]
,Exterior Lighting Total,0.00,,,,,,0.00
----------------------------------------------------------------------------------------------------
REPORT:,Equipment Summary
FOR:,Entire Facility
Central Plant
,,Type,Nominal Capacity [W],Nominal Efficiency [W/W],IPLV in SI Units [W/W],IPLV in IP Units [Btu/W-h]
,None,,,,,
Cooling Coils
,,Type,Design Coil Load [W],Nominal Total Capacity [W],Nominal Sensible Capacity [W],Nominal Latent Capacity [W],Nominal Sensible Heat Ratio,Nominal Efficiency [W/W],Nominal Coil UA Value [W/C],Nominal Coil Surface Area [m2]
,None,,,,,,,,,
DX Cooling Coils
,,DX Cooling Coil Type,Standard Rated Net Cooling Capacity [W],Standard Rated Net COP [W/W],EER [Btu/W-h],SEER User [Btu/W-h],SEER Standard [Btu/W-h],IEER [Btu/W-h]
,None,,,,,,,
DX Cooling Coil ASHRAE 127 Standard Ratings Report
,,DX Cooling Coil Type,Rated Net Cooling Capacity Test A [W],Rated Electric Power Test A [W],Rated Net Cooling Capacity Test B [W],Rated Electric Power Test B [W],Rated Net Cooling Capacity Test C [W],Rated Electric Power Test C [W],Rated Net Cooling Capacity Test D [W],Rated Electric Power Test D [W]
,None,,,,,,,,,
DX Heating Coils
,,DX Heating Coil Type,High Temperature Heating (net) Rating Capacity [W],Low Temperature Heating (net) Rating Capacity [W],HSPF [Btu/W-h],Region Number
,None,,,,,
Heating Coils
,,Type,Design Coil Load [W],Nominal Total Capacity [W],Nominal Efficiency [W/W]
,None,,,,
Fans
,,Type,Total Efficiency [W/W],Delta Pressure [pa],Max Air Flow Rate [m3/s],Rated Electricity Rate [W],Rated Power Per Max Air Flow Rate [W-s/m3],Motor Heat In Air Fraction,Fan Energy Index,End Use Subcategory,Design Day Name for Fan Sizing Peak,Date/Time for Fan Sizing Peak
,None,,,,,,,,,,,
Pumps
,,Type,Control,Head [pa],Water Flow [m3/s],Electricity Rate [W],Power Per Water Flow Rate [W-s/m3],Motor Efficiency [W/W],End Use Subcategory
,None,,,,,,,,
Service Water Heating
,,Type,Storage Volume [m3],Input [W],Thermal Efficiency [W/W],Recovery Efficiency [W/W],Energy Factor
,None,,,,,,
----------------------------------------------------------------------------------------------------
REPORT:,HVAC Sizing Summary
FOR:,Entire Facility
Zone Sensible Cooling
,,Calculated Design Load [W],User Design Load [W],User Design Load per Area [W/m2],Calculated Design Air Flow [m3/s],User Design Air Flow [m3/s],Design Day Name,Date/Time Of Peak {TIMESTAMP},Thermostat Setpoint Temperature at Peak Load [C],Indoor Temperature at Peak Load [C],Indoor Humidity Ratio at Peak Load [kgWater/kgDryAir],Outdoor Temperature at Peak Load [C],Outdoor Humidity Ratio at Peak Load [kgWater/kgDryAir],Minimum Outdoor Air Flow Rate [m3/s],Heat Gain Rate from DOAS [W]
,None,,,,,,,,,,,,,,
The Design Load is the zone sensible load only. It does not include any system effects or ventilation loads.
Zone Sensible Heating
,,Calculated Design Load [W],User Design Load [W],User Design Load per Area [W/m2],Calculated Design Air Flow [m3/s],User Design Air Flow [m3/s],Design Day Name,Date/Time Of Peak {TIMESTAMP},Thermostat Setpoint Temperature at Peak Load [C],Indoor Temperature at Peak Load [C],Indoor Humidity Ratio at Peak Load [kgWater/kgDryAir],Outdoor Temperature at Peak Load [C],Outdoor Humidity Ratio at Peak Load [kgWater/kgDryAir],Minimum Outdoor Air Flow Rate [m3/s],Heat Gain Rate from DOAS [W]
,None,,,,,,,,,,,,,,
The Design Load is the zone sensible load only. It does not include any system effects or ventilation loads.
System Design Air Flow Rates
,,Calculated cooling [m3/s],User cooling [m3/s],Calculated heating [m3/s],User heating [m3/s],Adjusted cooling [m3/s],Adjusted heating [m3/s],Adjusted main [m3/s],Calculated Heating Air Flow Ratio [],User Heating Air Flow Ratio []
,None,,,,,,,,,
Plant Loop Coincident Design Fluid Flow Rate Adjustments
,,Previous Design Volume Flow Rate [m3/s],Algorithm Volume Flow Rate [m3/s],Coincident Design Volume Flow Rate [m3/s],Coincident Size Adjusted,Peak Sizing Period Name,Peak Day into Period {TIMESTAMP}[day],Peak Hour Of Day {TIMESTAMP}[hr],Peak Step Start Minute {TIMESTAMP}[min]
,None,,,,,,,,
Coil Sizing Summary
,,Coil Type,HVAC Type,HVAC Name,Coil Final Gross Total Capacity [W],Coil Final Gross Sensible Capacity [W],Coil Final Reference Air Volume Flow Rate [m3/s],Coil Final Reference Plant Fluid Volume Flow Rate [m3/s],Coil U-value Times Area Value [W/K],Design Day Name at Sensible Ideal Loads Peak,Date/Time at Sensible Ideal Loads Peak,Design Day Name at Air Flow Ideal Loads Peak,Date/Time at Air Flow Ideal Loads Peak,Coil Total Capacity at Ideal Loads Peak [W],Coil Sensible Capacity at Ideal Loads Peak [W],Coil Air Volume Flow Rate at Ideal Loads Peak [m3/s],Coil Entering Air Drybulb at Ideal Loads Peak [C],Coil Entering Air Wetbulb at Ideal Loads Peak [C],Coil Entering Air Humidity Ratio at Ideal Loads Peak [kgWater/kgDryAir],Coil Leaving Air Drybulb at Ideal Loads Peak [C],Coil Leaving Air Wetbulb at Ideal Loads Peak [C],Coil Leaving Air Humidity Ratio at Ideal Loads Peak [kgWater/kgDryAir],Outdoor Air Drybulb at Ideal Loads Peak [C],Outdoor Air Humidity Ratio at Ideal Loads Peak [kgWater/kgDryAir],Outdoor Air Wetbulb at Ideal Loads Peak [C],Outdoor Air Flow Percentage at Ideal Loads Peak [%],Zone Air Drybulb at Ideal Loads Peak [C],Zone Air Humidity Ratio at Ideal Loads Peak [kgWater/kgDryAir],Zone Air Relative Humidity at Ideal Loads Peak [%],Zone Sensible Heat Gain at Ideal Loads Peak [W],Zone Latent Heat Gain at Ideal Loads Peak [W],Coil Total Capacity at Rating Conditions [W],Coil Sensible Capacity at Rating Conditions [W]
,None,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
----------------------------------------------------------------------------------------------------
REPORT:,System Summary
FOR:,Entire Facility
Economizer
,,High Limit Shutoff Control,Minimum Outdoor Air [m3/s],Maximum Outdoor Air [m3/s],Return Air Temp Limit,Return Air Enthalpy Limit,Outdoor Air Temperature Limit [C],Outdoor Air Enthalpy Limit [C]
,None,,,,,,,
Demand Controlled Ventilation using Controller:MechanicalVentilation
,,Controller:MechanicalVentilation Name,Outdoor Air Per Person [m3/s-person],Outdoor Air Per Area [m3/s-m2],Outdoor Air Per Zone [m3/s],Outdoor Air ACH [ach],Outdoor Air Method,Outdoor Air Schedule Name,Air Distribution Effectiveness in Cooling Mode,Air Distribution Effectiveness in Heating Mode,Air Distribution Effectiveness Schedule Name
,None,,,,,,,,,,
Time Not Comfortable Based on Simple ASHRAE 55-2004
,,Winter Clothes [hr],Summer Clothes [hr],Summer or Winter Clothes [hr]
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,175785,6488.00,6546.00,4705.50
,176293,6574.50,6807.50,5004.50
,182393,6624.75,6733.50,5006.75
,Facility,7106.25,7011.75,5311.25
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
Aggregated over the RunPeriods for Weather
Time Setpoint Not Met
,,During Heating [hr],During Cooling [hr],During Occupied Heating [hr],During Occupied Cooling [hr]
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,175785,0.00,0.00,0.00,0.00
,176293,0.00,0.00,0.00,0.00
,182393,0.00,0.00,0.00,0.00
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
,Facility,0.00,0.00,0.00,0.00
Aggregated over the RunPeriods for Weather
----------------------------------------------------------------------------------------------------
REPORT:,Outdoor Air Summary
FOR:,Entire Facility
Average Outdoor Air During Occupied Hours
,,Average Number of Occupants,Nominal Number of Occupants,Zone Volume [m3],Mechanical Ventilation [ach],Infiltration [ach],AFN Infiltration [ach],Simple Ventilation [ach]
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,175785,12.66,18.72,1403.17,0.000,0.000,0.000,0.387
,176293,10.01,14.79,1109.06,0.000,0.000,0.000,0.387
,182393,5.40,7.98,797.48,0.000,0.000,0.000,0.290
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
Values shown for a single zone without multipliers
Minimum Outdoor Air During Occupied Hours
,,Average Number of Occupants,Nominal Number of Occupants,Zone Volume [m3],Mechanical Ventilation [ach],Infiltration [ach],AFN Infiltration [ach],Simple Ventilation [ach]
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,175785,12.66,18.72,1403.17,0.000,0.000,0.000,0.007
,176293,10.01,14.79,1109.06,0.000,0.000,0.000,0.007
,182393,5.40,7.98,797.48,0.000,0.000,0.000,0.005
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
Values shown for a single zone without multipliers
----------------------------------------------------------------------------------------------------
REPORT:,Object Count Summary
FOR:,Entire Facility
Surfaces by Class
,,Total,Outdoors
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Wall,16,14
,Floor,3,3
,Roof,3,3
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
,Internal Mass,0,0
,Building Detached Shading,0,0
,Fixed Detached Shading,0,0
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Window,14,14
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
,Door,0,0
,Glass Door,0,0
,Shading,0,0
,Overhang,0,0
,Fin,0,0
,Tubular Daylighting Device Dome,0,0
,Tubular Daylighting Device Diffuser,0,0
HVAC
,,Count
,HVAC Air Loops,0
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Conditioned Zones,3
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
,Unconditioned Zones,0
,Supply Plenums,0
,Return Plenums,0
Input Fields
,,Count
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,IDF Objects,113
,Defaulted Fields,8
,Fields with Defaults,401
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
,Autosized Fields,0
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,Autosizable Fields,12
,Autocalculated Fields,81
,Autocalculatable Fields,84
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
----------------------------------------------------------------------------------------------------
REPORT:,Sensible Heat Gain Summary
FOR:,Entire Facility
Annual Building Sensible Heat Gain Components
,,HVAC Zone Eq & Other Sensible Air Heating [kWh],HVAC Zone Eq & Other Sensible Air Cooling [kWh],HVAC Terminal Unit Sensible Air Heating [kWh],HVAC Terminal Unit Sensible Air Cooling [kWh],HVAC Input Heated Surface Heating [kWh],HVAC Input Cooled Surface Cooling [kWh],People Sensible Heat Addition [kWh],Lights Sensible Heat Addition [kWh],Equipment Sensible Heat Addition [kWh],Window Heat Addition [kWh],Interzone Air Transfer Heat Addition [kWh],Infiltration Heat Addition [kWh],Opaque Surface Conduction and Other Heat Addition [kWh],Equipment Sensible Heat Removal [kWh],Window Heat Removal [kWh],Interzone Air Transfer Heat Removal [kWh],Infiltration Heat Removal [kWh],Opaque Surface Conduction and Other Heat Removal [kWh]
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,175785,43048.351,-12346.47,0.000,0.000,0.000,0.000,9408.890,5260.065,9051.411,14802.112,0.000,161.085,0.000,0.000,-17395.07,0.000,-25721.02,-26269.36
,176293,38609.040,-7666.35,0.000,0.000,0.000,0.000,7449.341,4157.541,7154.210,7096.867,0.000,127.321,0.000,0.000,-14980.01,0.000,-20253.67,-21694.29
,182393,32346.619,-7050.46,0.000,0.000,0.000,0.000,4038.987,2242.140,3858.228,10037.769,0.000,69.058,0.000,0.000,-14033.41,0.000,-10884.82,-20624.10
,Total Facility,114004.011,-27063.27,0.000,0.000,0.000,0.000,20897.218,11659.746,20063.848,31936.748,0.000,357.465,0.000,0.000,-46408.49,0.000,-56859.52,-68587.75
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
Peak Cooling Sensible Heat Gain Components
,,Time of Peak {TIMESTAMP},HVAC Zone Eq & Other Sensible Air Heating [W],HVAC Zone Eq & Other Sensible Air Cooling [W],HVAC Terminal Unit Sensible Air Heating [W],HVAC Terminal Unit Sensible Air Cooling [W],HVAC Input Heated Surface Heating [W],HVAC Input Cooled Surface Cooling [W],People Sensible Heat Addition [W],Lights Sensible Heat Addition [W],Equipment Sensible Heat Addition [W],Window Heat Addition [W],Interzone Air Transfer Heat Addition [W],Infiltration Heat Addition [W],Opaque Surface Conduction and Other Heat Addition [W],Equipment Sensible Heat Removal [W],Window Heat Removal [W],Interzone Air Transfer Heat Removal [W],Infiltration Heat Removal [W],Opaque Surface Conduction and Other Heat Removal [W]
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,175785,15-AUG-14:00,0.00,-17068.90,0.00,0.00,0.00,0.00,410.61,0.00,935.79,11320.00,0.00,1194.62,3207.88,0.00,-0.00,0.00,0.00,0.00
,176293,19-JUL-18:30,0.00,-11505.90,0.00,0.00,0.00,0.00,973.64,0.00,1664.20,6601.36,0.00,713.40,1553.30,0.00,-0.00,0.00,0.00,0.00
,182393,15-AUG-14:00,0.00,-11080.13,0.00,0.00,0.00,0.00,175.03,0.00,398.89,7757.96,0.00,510.12,2238.15,0.00,-0.00,0.00,0.00,0.00
,Total Facility,15-AUG-14:30,0.00,-37585.08,0.00,0.00,0.00,0.00,910.18,0.00,2074.32,23736.81,0.00,2647.74,8216.03,0.00,0.00,0.00,0.00,0.00
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
Peak Heating Sensible Heat Gain Components
,,Time of Peak {TIMESTAMP},HVAC Zone Eq & Other Sensible Air Heating [W],HVAC Zone Eq & Other Sensible Air Cooling [W],HVAC Terminal Unit Sensible Air Heating [W],HVAC Terminal Unit Sensible Air Cooling [W],HVAC Input Heated Surface Heating [W],HVAC Input Cooled Surface Cooling [W],People Sensible Heat Addition [W],Lights Sensible Heat Addition [W],Equipment Sensible Heat Addition [W],Window Heat Addition [W],Interzone Air Transfer Heat Addition [W],Infiltration Heat Addition [W],Opaque Surface Conduction and Other Heat Addition [W],Equipment Sensible Heat Removal [W],Window Heat Removal [W],Interzone Air Transfer Heat Removal [W],Infiltration Heat Removal [W],Opaque Surface Conduction and Other Heat Removal [W]
a script named energy_system_sizing.py is created in the importers to size the energy system components. This is a very simple sizing process where we only size the heat pump and boiler for 60 and 40 percent of the maximum demand The class SystemSimulation in system_simulation.py is created to contain all the simulation models of different archetypes. main.py is modified to randomly assign base case systems to city and print the heating consumption, and then assign a new system to all buildings and calculate the heating consumption again
2024-01-17 13:10:39 -05:00
,175785,12-JAN-07:03,62764.69,0.00,0.00,0.00,0.00,0.00,1327.44,1286.71,1871.57,0.00,0.00,0.00,0.00,0.00,-7102.44,0.00,-8506.39,-51641.58
,176293,12-JAN-07:03,50123.61,0.00,0.00,0.00,0.00,0.00,1049.21,1017.01,1479.29,0.00,0.00,0.00,0.00,0.00,-5797.15,0.00,-6723.29,-41148.67
,182393,12-JAN-07:03,39192.40,0.00,0.00,0.00,0.00,0.00,565.83,548.47,797.77,0.00,0.00,0.00,0.00,0.00,-5843.18,0.00,-3623.55,-31637.75
,Total Facility,12-JAN-07:03,152080.70,0.00,0.00,0.00,0.00,0.00,2942.49,2852.19,4148.63,0.00,0.00,0.00,0.00,0.00,-18742.76,0.00,-18853.24,-124428.00
geojson_creator.py is changed to a function getting x, y, and diff as input to generate the .geojson file in main.py city is created and using ep_workflow.py the building demands are calculated and buildings are enriched.
2023-12-20 15:33:50 -05:00
Reference in New Issue Copy Permalink