CERC/hub
58
0
Fork 0
Code Issues 2 Pull Requests Actions Packages Projects Releases 84 Wiki Activity
7c82a6eaba
hub/data/schedules/idf_files/ASHRAE901_RetailStripmall_STD2019_Rochester.idf
Soroush Samareh Abolhassani 1e591ba5b4 The idf files have been added.
2021-08-30 18:46:35 -04:00

10545 lines
509 KiB
Plaintext
Raw Blame History

!The DOE Prototype Building Models were developed by Pacific Northwest National Laboratory (PNNL), under contract with the U.S.
!Department of Energy (DOE). These building models were derived from DOE's Commercial Reference Building Models with modifications
!based on input from the ASHRAE Standard 90.1 committee, the Advanced Energy Design Guide series, and building industry experts. The
!prototypes models were developed to quantify energy saving impacts from newly published editions of ASHRAE Standard 90.1, 189.1, IECC,
!and other energy codes and standards. The basic building descriptions can be found in the Scorecards posted at www.energycodes.gov
!website. The recommended citation of the prototype models is
!
!DOE and PNNL. 2020. Commercial Prototype Building Models, Richland, WA, Pacific Northwest National Laboratory. Available at https://www.energycodes.gov/development/commercial/prototype_models.
!
!Detailed descriptions of the prototype model development and addenda modeling strategies can be found in the following reports:
!DOE, 2020. Preliminary Energy Savings Analysis: ANSI/ASHRAE/IES Standard 90.1-2019. Report prepared by Zhang, J., M. Rosenberg, J.
!Lerond, Y. Xie, Nambia, C., Y. Chen, R. Hart, M. Halverson, D. Maddox, and S. Goel, Richland, WA, Pacific Northwest National Laboratory.
!
!Zhang, J., Y. Chen, Y. Xie, M. Rosenberg, R. Hart. Energy and Energy Cost Savings Analysis of the 2018 IECC for Commercial Buildings.
!2018. PNNL-28125. Richland, WA: Pacific Northwest National Laboratory.
!
!DOE. 2017. Energy Savings Analysis: ANSI/ASHRAE/IES Standard 90.1-2016. Prepared by Athalye, R.A, M.A. Halverson, M.I. Rosenberg, B. Liu,
!J. Zhang, R. Hart, V.V. Mendon, S. Goel, Y. Chen, Y. Xie, and M. Zhao, Richland, WA, Pacific Northwest National Laboratory. https://www.energycodes.gov/sites/default/files/documents/02202018_Standard_90.1-2016_Determination_TSD.pdf.
!
!Zhang, J., Y. Xie, R.A. Athalye, J. Zhuge, M. Rosenberg, R. Hart, and B. Liu. Energy and Energy Cost Savings Analysis of the 2015 IECC
!for Commercial Buildings. 2015. PNNL-24269 Rev. 1. Richland, WA: Pacific Northwest National
!Laboratory. https://www.energycodes.gov/sites/default/files/documents/2015_IECC_Commercial_Analysis.pdf.
!
!Halverson M.A., M.I. Rosenberg, W. Wang, J. Zhang, V.V. Mendon, R.A. Athalye, Y. Xie, R. Hart, S. Goel, 2014. ANSI/ASHRAE/IES Standard
!90.1-2013 Determination of Energy Savings: Quantitative Analysis, PNNL-23479. Richland, WA: Pacific Northwest National Laboratory. https://www.energycodes.gov/sites/default/files/documents/901-2013_finalCommercialDeterminationQuantitativeAnalysis_TSD_0.pdf.
!
!Goel S., R.A. Athalye, W. Wang, J. Zhang, M.I. Rosenberg, Y. Xie, and R. Hart, et al. 2014. Enhancements to ASHRAE Standard 90.1
!Prototype Building Models. PNNL-23269. Richland, WA: Pacific Northwest National Laboratory. https://www.pnnl.gov/main/publications/external/technical_reports/PNNL-23269.pdf.
!
!Zhang J., R.A. Athalye, R. Hart, M.I. Rosenberg, Y. Xie, S. Goel, and V.V. Mendon, et al. 2013. Energy and Energy Cost Savings Analysis
!of the IECC for Commercial Buildings. PNNL-22760. Richland, WA: Pacific Northwest National Laboratory. http://www.pnnl.gov/main/publications/external/technical_reports/PNNL-22760.pdf.
!
!Thornton B.A., M.I. Rosenberg, E.E. Richman, W. Wang, Y. Xie, J. Zhang, H. Cho, VV Mendon, R.A. Athalye, and B. Liu. 2011. Achieving
!the 30% Goal: Energy and Cost Savings Analysis of ASHRAE Standard 90.1-2010. PNNL-20405. Richland, WA: Pacific Northwest National
!Laboratory. https://www.energycodes.gov/sites/default/files/documents/BECP_Energy_Cost_Savings_STD2010_May2011_v00.pdf.
!
!
! WeatherFile: USA_MN_Rochester.Intl.AP.726440_TMY3.epw
! BEGIN ECONOMIZER MAP
! Economizer Name, DX COIL Name
! PSZ-AC_1:1_OA_Controller, PSZ-AC_1:1_Unitary_Package_CoolCoil
! PSZ-AC_2:2_OA_Controller, PSZ-AC_2:2_Unitary_Package_CoolCoil
! PSZ-AC_3:3_OA_Controller, PSZ-AC_3:3_Unitary_Package_CoolCoil
! PSZ-AC_4:4_OA_Controller, PSZ-AC_4:4_Unitary_Package_CoolCoil
! PSZ-AC_5:5_OA_Controller, PSZ-AC_5:5_Unitary_Package_CoolCoil
! PSZ-AC_6:6_OA_Controller, PSZ-AC_6:6_Unitary_Package_CoolCoil
! PSZ-AC_7:7_OA_Controller, PSZ-AC_7:7_Unitary_Package_CoolCoil
! PSZ-AC_8:8_OA_Controller, PSZ-AC_8:8_Unitary_Package_CoolCoil
! PSZ-AC_9:9_OA_Controller, PSZ-AC_9:9_Unitary_Package_CoolCoil
! PSZ-AC_10:10_OA_Controller, PSZ-AC_10:10_Unitary_Package_CoolCoil
! END ECONOMIZER MAP
!
!
! BEGIN EMS PROGRAM MAP
! EMS PROGRAM, DX COIL Name
! PSZ-AC_1:1, PSZ-AC_1:1_UNITARY_PACKAGE_COOLCOIL
! PSZ-AC_2:2, PSZ-AC_2:2_UNITARY_PACKAGE_COOLCOIL
! PSZ-AC_3:3, PSZ-AC_3:3_UNITARY_PACKAGE_COOLCOIL
! PSZ-AC_4:4, PSZ-AC_4:4_UNITARY_PACKAGE_COOLCOIL
! PSZ-AC_5:5, PSZ-AC_5:5_UNITARY_PACKAGE_COOLCOIL
! PSZ-AC_6:6, PSZ-AC_6:6_UNITARY_PACKAGE_COOLCOIL
! PSZ-AC_7:7, PSZ-AC_7:7_UNITARY_PACKAGE_COOLCOIL
! PSZ-AC_8:8, PSZ-AC_8:8_UNITARY_PACKAGE_COOLCOIL
! PSZ-AC_9:9, PSZ-AC_9:9_UNITARY_PACKAGE_COOLCOIL
! PSZ-AC_10:10, PSZ-AC_10:10_UNITARY_PACKAGE_COOLCOIL
! END EMS PROGRAM MAP
! GPARM parameters as input:
! Case = ASHRAE901_RetailStripmall_STD2019_Rochester
! SelectedCase =
! ground_tempt = National_RetailStripmall_ASHRAE901_STD2016_Zone6A_nonres_MN-Rochester-MN.gtp
! avg_oa_tempt_ip = 43.475
! maxdiff_oa_tempt_ip = 60.3
! ext_wall_type = SteelFramedWall
! nonres_ext_wall_ufactor = 0.278234887
! roof_type = LightweightRoof
! nonres_roof_ufactor = 0.181704416
! nonres_window =
! roof_emissivity = 0.9
! roof_solar_absorp = 0.77
! LPD_Type1 = 9.584185835
! LPD_Type2 = 5.694108611
! LPD_Type3 = 8.568072692
! LPD_type1_allowance = 4.006655691
! LPD_type2_allowance = 1.853873608
! LPD_type3_allowance = 0.239287045
! exterior_lights_watts = 0
! exterior_lights_watts_a = 418.4
! exterior_lights_watts_b = 2520.304746
! economizer = DifferentialDryBulb
! skip_economizer_control = No
! cc_sa_humidity = 0.0085
! damper_sch_type1 = Type1_MinOA_MotorizedDamper_SCH
! damper_sch_type2 = Type2_MinOA_MotorizedDamper_SCH
! damper_sch_type3 = Type3_MinOA_MotorizedDamper_SCH
! LGstore1_SZ_VAV = No
! avg_oa_tempt = 6.375
! maxdiff_oa_tempt = 33.5
! infil = 0.00056896
! OA_Type1 = 0.001181026
! OA_Type2 = 0.001181026
! OA_Type3 = 0.001181026
! door_infil1 = 0.241164917
! door_infil2 = 0.134504895
! frac_ofpk = 0.131
! economizer_lockout = LockoutWithHeating
! TYPE1_EQUIP_SCH = TYPE1_EQUIP_SCH_ADV
! TYPE2_EQUIP_SCH = TYPE2_EQUIP_SCH_ADV
! TYPE3_EQUIP_SCH = TYPE3_EQUIP_SCH_ADV
! addendum_cd = 2016AS
! pv_generator = no
! pv_surface_area = 0
! STD189_overhang = no
! swh_et = 1
! swh_ua = 1.205980747
! ext_lgt_sch = Exterior_Lgt_ALWAYS_ON
! PSZ_AC_1_1_ERV = No
! PSZ_AC_6_6_ERV = No
! SZ_VAV_189_LGstore2 = no
! LTG_SCH_SET = LTG_SET_STD2013
! PSZ_AC_1_1_ERV_power = 345.215375
! PSZ_AC_6_6_ERV_power = 345.215375
! Type1_HtgSetP_Sch = Type1_HTGSETP_SCH_NO_OPTIMUM
! Type1_ClgSetP_Sch = Type1_CLGSETP_SCH_NO_OPTIMUM
! Type2_HtgSetP_Sch = Type2_HTGSETP_SCH_NO_OPTIMUM
! Type2_ClgSetP_Sch = Type2_CLGSETP_SCH_NO_OPTIMUM
! Type3_HtgSetP_Sch = Type3_HTGSETP_SCH_NO_OPTIMUM
! Type3_ClgSetP_Sch = Type3_CLGSETP_SCH_NO_OPTIMUM
! pipe_heat_loss = 173
! skip_EMSprogram = no
! Wfile_TMY3 = USA_MN_Rochester.Intl.AP.726440_TMY3.epw
! loadProfile = No
! receptacle_ctrl_occ_reduction_frac = 0.9962875
! receptacle_ctrl_unocc_reduction_frac = 0.983125
! CodeName = ASHRAE90.1_STD2019
! CZ_City_Old = Burlington
! CZ_Label = 6A
! exterior_lights_watts_c = 2520.304746
! Addendum_AH = Yes
! LPD_Ctrl = 0.02
! con_swingdoor_r = 0.475963827
! base_lpd = 9.584185835
! display_lpd_type3_lgstore = 5.694108611
! display_lpd_type3_smstore = 8.568072692
! display_lpd_type2_smstore = 6.953486129
! display_lpd_type1_smstore = 0
! display_lpd_type1_smstore.1 = 0
! nonres_window_u_factor = 0.34
! nonres_window_shgc = 0.38
! nonresLSG = 1.1
! AnalysisPurpose = ProgressIndicator
! AnalysisCodeName = ASHRAE901
! AnalysisCodeYear = 2019
! AnalysisAmendment = NoneAmend
! AnalysisPrototype = RetailStripmall
! AnalysisScope = National
! AnalysisState = National
! AnalysisClimateZone = 6A
! AnalysisCity = USA_MN_Rochester
! var_Ffactor_IP = 0.51
! var_Cfactor_IP = 0.092
! Water_Heater_flow = 1.89e-06
! VT_Elec_Wheater = No
! specify overhang_pf for 1891 codes
Version,9.0;
Timestep,6;
SimulationControl,
Yes, !- Do Zone Sizing Calculation
Yes, !- Do System Sizing Calculation
Yes, !- Do Plant Sizing Calculation
No, !- Run Simulation for Sizing Periods
YES; !- Run Simulation for Weather File Run Periods
RunPeriod,
, !- Name
1, !- Begin Month
1, !- Begin Day of Month
, !- Begin Year
12, !- End Month
31, !- End Day of Month
, !- End Year
Sunday, !- Day of Week for Start Day
No, !- Use Weather File Holidays and Special Days
No, !- Use Weather File Daylight Saving Period
No, !- Apply Weekend Holiday Rule
Yes, !- Use Weather File Rain Indicators
Yes; !- Use Weather File Snow Indicators
SurfaceConvectionAlgorithm:Inside,TARP;
SurfaceConvectionAlgorithm:Outside,TARP;
HeatBalanceAlgorithm,ConductionTransferFunction,200.0000;
Sizing:Parameters,
1.2000, !- Heating Sizing Factor
1.2000, !- Cooling Sizing Factor
6; !- Timesteps in Averaging Window
ConvergenceLimits,
1, !- Minimum System Timestep {minutes}
20; !- Maximum HVAC Iterations
ShadowCalculation,
AverageOverDaysInFrequency, !- Calculation Method
30, !- Calculation Frequency
15000; !- Maximum Figures in Shadow Overlap Calculations
GlobalGeometryRules,
UpperLeftCorner, !- Starting Vertex Position
Counterclockwise, !- Vertex Entry Direction
Relative, !- Coordinate System
Relative; !- Daylighting Reference Point Coordinate System
Building,
RetailStripmall, !- Name
0.0000, !- North Axis {deg}
City, !- Terrain
0.0400, !- Loads Convergence Tolerance Value
0.2000, !- Temperature Convergence Tolerance Value {deltaC}
FullInteriorAndExterior, !- Solar Distribution
25, !- Maximum Number of Warmup Days
6; !- Minimum Number of Warmup Days
RunPeriodControl:SpecialDays,
New Years Day, !- Name
January 1, !- Start Date
1, !- Duration {days}
Holiday; !- Special Day Type
RunPeriodControl:SpecialDays,
Veterans Day, !- Name
November 11, !- Start Date
1, !- Duration {days}
Holiday; !- Special Day Type
RunPeriodControl:SpecialDays,
Christmas, !- Name
December 25, !- Start Date
1, !- Duration {days}
Holiday; !- Special Day Type
RunPeriodControl:SpecialDays,
Independence Day, !- Name
July 4, !- Start Date
1, !- Duration {days}
Holiday; !- Special Day Type
RunPeriodControl:SpecialDays,
MLK Day, !- Name
3rd Monday in January, !- Start Date
1, !- Duration {days}
Holiday; !- Special Day Type
RunPeriodControl:SpecialDays,
Presidents Day, !- Name
3rd Monday in February, !- Start Date
1, !- Duration {days}
Holiday; !- Special Day Type
RunPeriodControl:SpecialDays,
Memorial Day, !- Name
Last Monday in May, !- Start Date
1, !- Duration {days}
Holiday; !- Special Day Type
RunPeriodControl:SpecialDays,
Labor Day, !- Name
1st Monday in September, !- Start Date
1, !- Duration {days}
Holiday; !- Special Day Type
RunPeriodControl:SpecialDays,
Columbus Day, !- Name
2nd Monday in October, !- Start Date
1, !- Duration {days}
Holiday; !- Special Day Type
RunPeriodControl:SpecialDays,
Thanksgiving, !- Name
4th Thursday in November,!- Start Date
1, !- Duration {days}
Holiday; !- Special Day Type
RunPeriodControl:DaylightSavingTime,
2nd Sunday in March, !- Start Date
1st Sunday in November; !- End Date
!- =========== ALL OBJECTS IN CLASS: LOCATION ===========
! Site:Location and design-day objects created by:
! ../../_p.bin/ddy2idf /projects/bigsim/weather/EnergyPlus/tmy3.new/all/USA_MN_Rochester.Intl.AP.726440_TMY3.ddy
!
Site:Location,
Rochester International Arpt_MN_USA Design_Conditions, !- Site:Location Name
43.90, !- Latitude {N+ S-}
-92.50, !- Longitude {W- E+}
-6.00, !- Time Zone Relative to GMT {GMT+/-}
398.00; !- Elevation {m}
SizingPeriod:DesignDay,
Rochester International Arpt Ann Htg 99.6% Condns DB, !- Name
1, !- Month
21, !- Day of Month
WinterDesignDay,!- Day Type
-26.2, !- Maximum Dry-Bulb Temperature {C}
0.0, !- Daily Dry-Bulb Temperature Range {C}
DefaultMultipliers, !- Dry-Bulb Temperature Range Modifier Type
, !- Dry-Bulb Temperature Range Modifier Schedule Name
Wetbulb, !- Humidity Condition Type
-26.2, !- Wetbulb at Maximum Dry-Bulb {C}
, !- Humidity Indicating Day Schedule Name
, !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir}
, !- Enthalpy at Maximum Dry-Bulb {J/kg}
, !- Daily WetBulb Temperature Range {deltaC}
96634., !- Barometric Pressure {Pa}
5.7, !- Wind Speed {m/s} design conditions vs. traditional 6.71 m/s (15 mph)
310, !- Wind Direction {Degrees; N=0, S=180}
No, !- Rain {Yes/No}
No, !- Snow on ground {Yes/No}
No, !- Daylight Savings Time Indicator
ASHRAEClearSky, !- Solar Model Indicator
, !- Beam Solar Day Schedule Name
, !- Diffuse Solar Day Schedule Name
, !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub)
, !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud)
0.00; !- Clearness {0.0 to 1.1}
SizingPeriod:DesignDay,
Rochester International Arpt Ann Clg .4% Condns DB=>MWB, !- Name
7, !- Month
21, !- Day of Month
SummerDesignDay,!- Day Type
31.2, !- Maximum Dry-Bulb Temperature {C}
10.6, !- Daily Dry-Bulb Temperature Range {C}
DefaultMultipliers, !- Dry-Bulb Temperature Range Modifier Type
, !- Dry-Bulb Temperature Range Modifier Schedule Name
Wetbulb, !- Humidity Condition Type
23.1, !- Wetbulb at Maximum Dry-Bulb {C}
, !- Humidity Indicating Day Schedule Name
, !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir}
, !- Enthalpy at Maximum Dry-Bulb {J/kg}
, !- Daily WetBulb Temperature Range {deltaC}
96634., !- Barometric Pressure {Pa}
6.7, !- Wind Speed {m/s} design conditions vs. traditional 3.35 m/s (7mph)
200, !- Wind Direction {Degrees; N=0, S=180}
No, !- Rain {Yes/No}
No, !- Snow on ground {Yes/No}
No, !- Daylight Savings Time Indicator
ASHRAETau, !- Solar Model Indicator
, !- Beam Solar Day Schedule Name
, !- Diffuse Solar Day Schedule Name
0.404, !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub)
2.226; !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud)
!- =========== ALL OBJECTS IN CLASS: SITE:WATERMAINSTEMPERATURE ===========
Site:WaterMainsTemperature,
Correlation, !- Calculation Method
, !- Temperature Schedule Name
6.375, !- Annual average outdoor air temperature {C}
33.5; !- Maximum difference in monthly average outdoor air temperatures {C}
!- =========== ALL OBJECTS IN CLASS: Site:GroundTemperature:FCfactorMethod ===========
Site:GroundTemperature:FCfactorMethod,
7.4, !- January Ground Temperature {C}
-0.0, !- February Ground Temperature {C}
-7.6, !- March Ground Temperature {C}
-12.6, !- April Ground Temperature {C}
-7.7, !- May Ground Temperature {C}
0.3, !- June Ground Temperature {C}
7.0, !- July Ground Temperature {C}
14.2, !- August Ground Temperature {C}
19.2, !- September Ground Temperature {C}
20.9, !- October Ground Temperature {C}
20.0, !- November Ground Temperature {C}
15.4; !- December Ground Temperature {C}
!- =========== ALL OBJECTS IN CLASS: MATERIAL:REGULAR-R ===========
Material:NoMass,
Opaque Door panel_con, !- Name
MediumRough, !- Roughness
0.475963827, !- Thermal Resistance {m2-K/W}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.7; !- Visible Absorptance
!- =========== ALL OBJECTS IN CLASS: CONSTRUCTION ===========
Construction,
Swinging Door_con, !- Name
Opaque Door panel_con; !- Outside Layer
!
!- =========== ALL OBJECTS IN CLASS: MATERIAL:REGULAR ===========
Material,
Std Wood 6inch, !- Name
MediumSmooth, !- Roughness
0.15, !- Thickness {m}
0.12, !- Conductivity {W/m-K}
540.0000, !- Density {kg/m3}
1210, !- Specific Heat {J/kg-K}
0.9000000, !- Thermal Absorptance
0.7000000, !- Solar Absorptance
0.7000000; !- Visible Absorptance
Material,
AC02 Acoustic Ceiling, !- Name
MediumSmooth, !- Roughness
1.2700000E-02, !- Thickness {m}
5.7000000E-02, !- Conductivity {W/m-K}
288.0000, !- Density {kg/m3}
1339.000, !- Specific Heat {J/kg-K}
0.9000000, !- Thermal Absorptance
0.7000000, !- Solar Absorptance
0.2000000; !- Visible Absorptance
Material,
F07 25mm stucco, !- Name
Smooth, !- Roughness
0.0254, !- Thickness {m}
0.72, !- Conductivity {W/m-K}
1856, !- Density {kg/m3}
840, !- Specific Heat {J/kg-K}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.7; !- Visible Absorptance
Material,
F08 Metal surface, !- Name
Smooth, !- Roughness
0.0008, !- Thickness {m}
45.28, !- Conductivity {W/m-K}
7824, !- Density {kg/m3}
500; !- Specific Heat {J/kg-K}
Material,
F08 Metal roof surface, !- Name
Smooth, !- Roughness
0.0008, !- Thickness {m}
45.28, !- Conductivity {W/m-K}
7824, !- Density {kg/m3}
500, !- Specific Heat {J/kg-K}
0.9, !- Absorptance:Thermal
0.77; !- Absorptance:Solar
Material,
F12 Asphalt shingles, !- Name
VeryRough, !- Roughness
0.0032, !- Thickness {m}
0.04, !- Conductivity {W/m-K}
1120, !- Density {kg/m3}
1260, !- Specific Heat {J/kg-K}
0.9, !- Absorptance:Thermal
0.77; !- Absorptance:Solar
Material,
F13 Built-up roofing, !- Name
Rough, !- Roughness
0.0095, !- Thickness {m}
0.16, !- Conductivity {W/m-K}
1120, !- Density {kg/m3}
1460, !- Specific Heat {J/kg-K}
0.9, !- Absorptance:Thermal
0.77; !- Absorptance:Solar
Material,
G01 13mm gypsum board, !- Name
Smooth, !- Roughness
0.0127, !- Thickness {m}
0.1600, !- Conductivity {W/m-K}
800.0000, !- Density {kg/m3}
1090.0000, !- Specific Heat {J/kg-K}
0.9000, !- Absorptance:Thermal
0.7000, !- Absorptance:Solar
0.5000; !- Absorptance:Visible
Material,
G01 16mm gypsum board, !- Name
MediumSmooth, !- Roughness
0.0159, !- Thickness {m}
0.16, !- Conductivity {W/m-K}
800, !- Density {kg/m3}
1090; !- Specific Heat {J/kg-K}
Material,
G02 16mm plywood, !- Name
Smooth, !- Roughness
0.0159, !- Thickness {m}
0.12, !- Conductivity {W/m-K}
544, !- Density {kg/m3}
1210; !- Specific Heat {J/kg-K}
Material,
M14 150mm heavyweight concrete roof, !- Name
MediumRough, !- Roughness
0.1524, !- Thickness {m}
2.31, !- Conductivity {W/m-K}
2322, !- Density {kg/m3}
832; !- Specific Heat {J/kg-K}
Material,
100mm Normalweight concrete wall, !- Name - based on 90.1-2004 Appendix-Table A3-1B
MediumRough, !- Roughness
0.1016, !- Thickness {m}
2.31, !- Conductivity {W/m-K}
2322, !- Density {kg/m3}
832; !- Specific Heat {J/kg-K}
Material,
200mm Normalweight concrete wall, !- Name - based on 90.1-2004 Appendix-Table A3-1B
MediumRough, !- Roughness
0.2032, !- Thickness {m}
2.31, !- Conductivity {W/m-K}
2322, !- Density {kg/m3}
832; !- Specific Heat {J/kg-K}
Material,
100mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B
MediumRough, !- Roughness
0.1016, !- Thickness {m}
2.31, !- Conductivity {W/m-K}
2322, !- Density {kg/m3}
832; !- Specific Heat {J/kg-K}
Material,
150mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B
MediumRough, !- Roughness
0.1524, !- Thickness {m}
2.31, !- Conductivity {W/m-K}
2322, !- Density {kg/m3}
832; !- Specific Heat {J/kg-K}
Material,
200mm Normalweight concrete floor, !- Name - based on 90.1-2004 Appendix-Table A3-1B
MediumRough, !- Roughness
0.2032, !- Thickness {m}
2.31, !- Conductivity {W/m-K}
2322, !- Density {kg/m3}
832; !- Specific Heat {J/kg-K}
Material,
M10 200mm concrete block wall, !- Name
MediumRough, !- Roughness
0.2032, !- Thickness {m}
0.72, !- Conductivity {W/m-K}
800, !- Density {kg/m3}
832; !- Specific Heat {J/kg-K}
Material,
M10 200mm concrete block basement wall, !- Name
MediumRough, !- Roughness
0.2032, !- Thickness {m}
1.326, !- Conductivity {W/m-K}
1842, !- Density {kg/m3}
912; !- Specific Heat {J/kg-K}
Material:NoMass,
CP02 CARPET PAD, !- Name
VeryRough, !- Roughness
0.21648, !- Thermal Resistance {m2-K/W}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.8; !- Visible Absorptance
Material:NoMass,
Air_Wall_Material, !- Name
Rough, !- Roughness
0.2079491, !- Thermal Resistance {m2-K/W}
0.9, !- Thermal Absorptance
0.7; !- Solar Absorptance
Material:NoMass,
Nonres_Roof_Insulation, !- Name
MediumSmooth, !- Roughness
5.30668495131472,
!- Thermal Resistance {m2-K/W}
0.9, !- Absorptance:Thermal
0.7, !- Absorptance:Solar
0.7; !- Absorptance:Visible
Material:NoMass,
Res_Roof_Insulation, !- Name
MediumSmooth, !- Roughness
0.0299387330245182,
!- Thermal Resistance {m2-K/W}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.7; !- Visible Absorptance
Material:NoMass,
Semiheated_Roof_Insulation, !- Name
MediumSmooth, !- Roughness
0.0299387330245182,
!- Thermal Resistance {m2-K/W}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.7; !- Visible Absorptance
Material:NoMass,
Nonres_Exterior_Wall_Insulation, !- Name
MediumSmooth, !- Roughness
3.21036415428069,
!- Thermal Resistance {m2-K/W}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.7; !- Visible Absorptance
Material:NoMass,
Res_Exterior_Wall_Insulation, !- Name
MediumSmooth, !- Roughness
0.0299387330245182,
!- Thermal Resistance {m2-K/W}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.7; !- Visible Absorptance
Material:NoMass,
Semiheated_Exterior_Wall_Insulation, !- Name
MediumSmooth, !- Roughness
0.0299387330245182,
!- Thermal Resistance {m2-K/W}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.7; !- Visible Absorptance
Material:NoMass,
Nonres_Floor_Insulation, !- Name
MediumSmooth, !- Roughness
0.0299387330245182,
!- Thermal Resistance {m2-K/W}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.7; !- Visible Absorptance
Material:NoMass,
Res_Floor_Insulation, !- Name
MediumSmooth, !- Roughness
0.0299387330245182,
!- Thermal Resistance {m2-K/W}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.7; !- Visible Absorptance
Material:NoMass,
Semiheated_Floor_Insulation, !- Name
MediumSmooth, !- Roughness
0.0299387330245182,
!- Thermal Resistance {m2-K/W}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.7; !- Visible Absorptance
Material:NoMass,
Std Opaque Door Panel, !- Name
MediumRough, !- Roughness
0.123456790123457, !- (corresponds to default RSI-0.12327 or R-0.7) Thermal Resistance {m2-K/W}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.7; !- Visible Absorptance
!- =========== ALL OBJECTS IN CLASS: CONSTRUCTION ===========
Construction,
InteriorFurnishings, !- Name
Std Wood 6inch; !- Outside Layer
Construction,
Air_Wall, !- Name
Air_Wall_Material; !- Outside Layer
Construction,
DropCeiling, !- Name
AC02 Acoustic Ceiling; !- Outside Layer
Construction,
OpaqueDoor, !- Name
Std Opaque Door Panel; !- Outside Layer
Construction,
AtticRoofDeck, !- Name
F12 Asphalt shingles, !- Outside Layer
G02 16mm plywood; !- Layer 2
Construction,
int_wall, !- Name
G01 13mm gypsum board, !- Outside Layer
G01 13mm gypsum board; !- Layer 2
Construction,
ext_slab_8in_with_carpet,!- Name
200mm Normalweight concrete floor, !- Outside Layer
CP02 CARPET PAD; !- Layer 2
Construction,
ext_slab_8in, !- Name
200mm Normalweight concrete floor; !- Outside Layer
Construction,
ext_slab_6in_with_carpet,!- Name
150mm Normalweight concrete floor, !- Outside Layer
CP02 CARPET PAD; !- Layer 2
Construction,
ext_slab_6in, !- Name
150mm Normalweight concrete floor; !- Outside Layer
Construction,
int_slab_floor, !- Name
100mm Normalweight concrete floor, !- Outside Layer
CP02 CARPET PAD; !- Layer 2
Construction,
int_slab_ceiling, !- Name
CP02 CARPET PAD, !- Outside Layer
100mm Normalweight concrete floor; !- Layer 2
Construction,
basement_wall, !- Name
M10 200mm concrete block basement wall; !- Outside Layer
Construction,
int_wood_floor, !- Name
AC02 Acoustic Ceiling, !- Outside Layer
G02 16mm plywood, !- Layer 2
CP02 CARPET PAD; !- Layer 3
Construction,
ext_soffit_floor, !- Name
G02 16mm plywood; !- Outside Layer
Construction,
nonres_roof, !- Name
F13 Built-up roofing, !- Outside Layer
Nonres_Roof_Insulation, !- Layer #2
F08 Metal surface; !- Layer #3
Construction,
res_roof, !- Name
F13 Built-up roofing, !- Outside Layer
Res_Roof_Insulation, !- Layer #2
F08 Metal surface; !- Layer #3
Construction,
semiheated_roof, !- Name
F13 Built-up roofing, !- Outside Layer
Semiheated_Roof_Insulation, !- Layer #2
F08 Metal surface; !- Layer #3
Construction,
nonres_ext_wall, !- Name
F07 25mm stucco, !- Outside Layer
G01 16mm gypsum board, !- Layer #2
Nonres_Exterior_Wall_Insulation, !- Layer #3
G01 16mm gypsum board; !- Layer #4
Construction,
res_ext_wall, !- Name
F07 25mm stucco, !- Outside Layer
G01 16mm gypsum board, !- Layer #1
Res_Exterior_Wall_Insulation, !- Layer #2
G01 16mm gypsum board; !- Layer #3
Construction,
semiheated_ext_wall, !- Name
F07 25mm stucco, !- Outside Layer
G01 16mm gypsum board, !- Layer #1
Semiheated_Exterior_Wall_Insulation, !- Layer #2
G01 16mm gypsum board; !- Layer #3
Construction,
nonres_floor, !- Name
Nonres_Floor_Insulation, !- Outside Layer
100mm Normalweight concrete floor, !- Layer #1
CP02 CARPET PAD; !- Layer #2
Construction,
res_floor, !- Name
Res_Floor_Insulation, !- Outside Layer
100mm Normalweight concrete floor, !- Layer #1
CP02 CARPET PAD; !- Layer #2
Construction,
semiheated_floor, !- Name
Semiheated_Floor_Insulation, !- Outside Layer
100mm Normalweight concrete floor, !- Layer #1
CP02 CARPET PAD; !- Layer #2
Construction,
nonres_floor_ceiling, !- Name - reverse ordered layers for nonres_floor
CP02 CARPET PAD, !- Outside Layer
100mm Normalweight concrete floor, !- Layer #1
Nonres_Floor_Insulation; !- Layer #2
Construction,
res_floor_ceiling, !- Name - reverse ordered layers for res_floor
CP02 CARPET PAD, !- Outside Layer
100mm Normalweight concrete floor, !- Layer #1
Res_Floor_Insulation; !- Layer #2
Construction,
semiheated_floor_ceiling, !- Name - reverse ordered layers for semiheated_floor
CP02 CARPET PAD, !- Outside Layer
100mm Normalweight concrete floor, !- Layer #1
Semiheated_Floor_Insulation; !- Layer #2
!- =========== ALL OBJECTS IN CLASS: WINDOWMATERIAL:SIMPLEGLAZINGSYSTEM ===========
WindowMaterial:SimpleGlazingSystem,
Nonres Window Glazing Layer, !- Name
1.9306084, !- U-Factor {W/m2-K}
0.38, !- Solar Heat Gain Coefficient
0.418; !- Visible Transmittance
Construction,
NonresWindow_U_0.34_SHGC_0.38, !- Name
Nonres Window Glazing Layer; !- Outside Layer
!- =========== ALL OBJECTS IN CLASS: SCHEDULETYPELIMITS ===========
ScheduleTypeLimits,
Any Number; !- Name
ScheduleTypeLimits,
Fraction, !- Name
0.0, !- Lower Limit Value
1.0, !- Upper Limit Value
CONTINUOUS; !- Numeric Type
ScheduleTypeLimits,
Temperature, !- Name
-60, !- Lower Limit Value
200, !- Upper Limit Value
CONTINUOUS; !- Numeric Type
ScheduleTypeLimits,
On/Off, !- Name
0, !- Lower Limit Value
1, !- Upper Limit Value
DISCRETE; !- Numeric Type
ScheduleTypeLimits,
Control Type, !- Name
0, !- Lower Limit Value
4, !- Upper Limit Value
DISCRETE; !- Numeric Type
ScheduleTypeLimits,
Humidity, !- Name
10, !- Lower Limit Value
90, !- Upper Limit Value
CONTINUOUS; !- Numeric Type
ScheduleTypeLimits,
Number; !- Name
Schedule:Compact,
Type1_OCC_SCH, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Monday Tuesday Wednesday Thursday, !- Field 2
Until: 08:00,0.0, !- Field 3
Until: 10:00,0.05, !- Field 5
Until: 12:00,0.1, !- Field 7
Until: 13:00,0.2, !- Field 9
Until: 15:00,0.4, !- Field 11
Until: 17:00,0.25, !- Field 13
Until: 20:00,0.50, !- Field 15
Until: 23:00,0.3, !- Field 17
Until: 24:00,0.05, !- Field 19
For: SummerDesignDay, !- Field 21
Until: 24:00,1.0, !- Field 22
For: Friday Saturday, !- Field 24
Until: 01:00,0.05, !- Field 25
Until: 09:00,0.0, !- Field 27
Until: 10:00,0.05, !- Field 29
Until: 12:00,0.1, !- Field 31
Until: 13:00,0.2, !- Field 33
Until: 14:00,0.6, !- Field 35
Until: 15:00,0.4, !- Field 37
Until: 17:00,0.25, !- Field 39
Until: 20:00,0.5, !- Field 41
Until: 23:00,0.3, !- Field 43
Until: 24:00,0.2, !- Field 45
For: WinterDesignDay, !- Field 47
Until: 24:00,0.0, !- Field 48
For: Sunday Holidays AllOtherDays, !- Field 50
Until: 08:00,0.0, !- Field 51
Until: 10:00,0.05, !- Field 53
Until: 11:00,0.1, !- Field 55
Until: 12:00,0.2, !- Field 57
Until: 13:00,0.4, !- Field 59
Until: 14:00,0.6, !- Field 61
Until: 16:00,0.4, !- Field 63
Until: 17:00,0.3, !- Field 65
Until: 19:00,0.6, !- Field 67
Until: 21:00,0.4, !- Field 69
Until: 22:00,0.3, !- Field 71
Until: 23:00,0.2, !- Field 73
Until: 24:00,0.05; !- Field 75
Schedule:Compact,
Type2_OCC_SCH, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays, !- Field 2
Until: 08:00,0.0, !- Field 3
Until: 09:00,0.05, !- Field 5
Until: 12:00,0.1, !- Field 7
Until: 13:00,0.2, !- Field 9
Until: 14:00,0.4, !- Field 11
Until: 15:00,0.30, !- Field 13
Until: 17:00,0.20, !- Field 15
Until: 19:00,0.5, !- Field 17
Until: 20:00,0.2, !- Field 19
Until: 21:00,0.05, !- Field 21
Until: 24:00,0.00, !- Field 23
For: SummerDesignDay, !- Field 25
Until: 24:00,1.0, !- Field 26
For: Saturday, !- Field 28
Until: 08:00,0.0, !- Field 29
Until: 09:00,0.05, !- Field 31
Until: 11:00,0.1, !- Field 33
Until: 12:00,0.2, !- Field 35
Until: 13:00,0.4, !- Field 37
Until: 14:00,0.6, !- Field 39
Until: 15:00,0.4, !- Field 41
Until: 18:00,0.3, !- Field 43
Until: 19:00,0.05, !- Field 45
Until: 24:00,0.0, !- Field 47
For: WinterDesignDay, !- Field 49
Until: 24:00,0.0, !- Field 50
For: Sunday Holidays AllOtherDays, !- Field 52
Until: 09:00,0.0, !- Field 53
Until: 10:00,0.05, !- Field 55
Until: 11:00,0.1, !- Field 57
Until: 12:00,0.2, !- Field 59
Until: 14:00,0.4, !- Field 61
Until: 15:00,0.3, !- Field 63
Until: 16:00,0.2, !- Field 65
Until: 17:00,0.1, !- Field 67
Until: 18:00,0.05, !- Field 69
Until: 24:00,0.0; !- Field 71
Schedule:Compact,
Type3_OCC_SCH, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays, !- Field 2
Until: 09:00,0.0, !- Field 3
Until: 10:00,0.11, !- Field 5
Until: 11:00,0.11, !- Field 7
Until: 12:00,0.43, !- Field 9
Until: 13:00,0.46, !- Field 11
Until: 14:00,0.71, !- Field 13
Until: 15:00,0.50, !- Field 15
Until: 16:00,0.69, !- Field 17
Until: 17:00,0.54, !- Field 19
Until: 18:00,0.71, !- Field 21
Until: 19:00,0.34, !- Field 23
Until: 20:00,0.26, !- Field 25
Until: 21:00,0.11, !- Field 27
Until: 24:00,0.00, !- Field 29
For: SummerDesignDay, !- Field 31
Until: 24:00,1.0, !- Field 32
For: Saturday, !- Field 34
Until: 09:00,0.0, !- Field 35
Until: 10:00,0.11, !- Field 37
Until: 11:00,0.11, !- Field 39
Until: 12:00,0.58, !- Field 41
Until: 13:00,0.71, !- Field 43
Until: 14:00,0.74, !- Field 45
Until: 15:00,0.77, !- Field 47
Until: 16:00,0.80, !- Field 49
Until: 17:00,0.74, !- Field 51
Until: 18:00,0.54, !- Field 53
Until: 19:00,0.11, !- Field 55
Until: 24:00,0.00, !- Field 57
For: WinterDesignDay, !- Field 59
Until: 24:00,0.0, !- Field 60
For: Sunday Holidays AllOtherDays, !- Field 62
Until: 10:00,0.0, !- Field 63
Until: 11:00,0.11, !- Field 65
Until: 12:00,0.11, !- Field 67
Until: 13:00,0.43, !- Field 69
Until: 14:00,0.46, !- Field 71
Until: 15:00,0.5, !- Field 73
Until: 16:00,0.69, !- Field 75
Until: 17:00,0.34, !- Field 77
Until: 18:00,0.11, !- Field 79
Until: 21:00,0.0, !- Field 81
Until: 23:00,0.0, !- Field 83
Until: 24:00,0.00; !- Field 85
Schedule:Compact,
Type1_LIGHT_SCH, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Monday Tuesday Wednesday Thursday, !- Field 2
Until: 8:00,0.05, !- Field 3
Until: 9:00,0.04991, !- Field 4
Until: 10:00,0.4991, !- Field 5
Until: 23:00,0.94829, !- Field 6
Until: 24:00,0.4991, !- Field 7
For: Friday Saturday, !- Field 8
Until: 1:00,0.4991, !- Field 9
Until: 9:00,0.05, !- Field 10
Until: 10:00,0.4991, !- Field 11
Until: 24:00,0.94829, !- Field 12
For: SummerDesignDay, !- Field 13
Until: 24:00,1, !- Field 14
For: WinterDesignDay, !- Field 15
Until: 24:00,0, !- Field 16
For: Sunday Holidays AllOtherDays, !- Field 17
Until: 8:00,0.05, !- Field 18
Until: 9:00,0.04991, !- Field 19
Until: 10:00,0.4991, !- Field 20
Until: 23:00,0.94829, !- Field 21
Until: 24:00,0.4991; !- Field 22
Schedule:Compact,
Type2_LIGHT_SCH, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays, !- Field 2
Until: 8:00,0.05, !- Field 3
Until: 9:00,0.5, !- Field 4
Until: 20:00,0.95, !- Field 5
Until: 21:00,0.5, !- Field 6
Until: 24:00,0.05, !- Field 7
For: Saturday, !- Field 8
Until: 8:00,0.05, !- Field 9
Until: 9:00,0.5, !- Field 10
Until: 18:00,0.95, !- Field 11
Until: 19:00,0.5, !- Field 12
Until: 24:00,0.05, !- Field 13
For: SummerDesignDay, !- Field 14
Until: 24:00,1, !- Field 15
For: WinterDesignDay, !- Field 16
Until: 24:00,0, !- Field 17
For: Sunday Holidays AllOtherDays, !- Field 18
Until: 9:00,0.05, !- Field 19
Until: 10:00,0.5, !- Field 20
Until: 17:00,0.95, !- Field 21
Until: 18:00,0.5, !- Field 22
Until: 24:00,0.05; !- Field 23
Schedule:Compact,
Type3_LIGHT_SCH, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays, !- Field 2
Until: 9:00,0.05, !- Field 3
Until: 10:00,0.5, !- Field 4
Until: 20:00,0.95, !- Field 5
Until: 21:00,0.5, !- Field 6
Until: 24:00,0.05, !- Field 7
For: Saturday, !- Field 8
Until: 9:00,0.05, !- Field 9
Until: 10:00,0.5, !- Field 10
Until: 18:00,0.95, !- Field 11
Until: 19:00,0.5, !- Field 12
Until: 24:00,0.05, !- Field 13
For: SummerDesignDay, !- Field 14
Until: 24:00,1, !- Field 15
For: WinterDesignDay, !- Field 16
Until: 24:00,0, !- Field 17
For: Sunday Holidays AllOtherDays, !- Field 18
Until: 10:00,0.05, !- Field 19
Until: 11:00,0.5, !- Field 20
Until: 17:00,0.95, !- Field 21
Until: 18:00,0.5, !- Field 22
Until: 24:00,0.05; !- Field 23
Schedule:Compact,
Type1_EQUIP_SCH, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Monday Tuesday Wednesday Thursday, !- Field 2
Until: 08:00,0.04915625, !- Field 3
Until: 09:00,0.049814375, !- Field 5
Until: 10:00,0.49814375, !- Field 7
Until: 23:00,0.89665875, !- Field 9
Until: 24:00,0.49814375, !- Field 11
For: Friday Saturday, !- Field 13
Until: 01:00,0.49814375, !- Field 14
Until: 08:00,0.04915625, !- Field 16
Until: 09:00,0.04915625, !- Field 18
Until: 10:00,0.49814375, !- Field 20
Until: 12:00,0.89665875, !- Field 22
Until: 18:00,0.89665875, !- Field 24
Until: 19:00,0.89665875, !- Field 26
Until: 21:00,0.89665875, !- Field 28
Until: 22:00,0.89665875, !- Field 30
Until: 24:00,0.89665875, !- Field 32
For: SummerDesignDay, !- Field 34
Until: 24:00,1.0, !- Field 35
For: WinterDesignDay, !- Field 37
Until: 24:00,0.0, !- Field 38
For: Sunday Holidays AllOtherDays, !- Field 40
Until: 08:00,0.04915625, !- Field 41
Until: 09:00,0.049814375, !- Field 43
Until: 10:00,0.49814375, !- Field 45
Until: 23:00,0.89665875, !- Field 47
Until: 24:00,0.49814375; !- Field 49
Schedule:Compact,
Type2_EQUIP_SCH, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays, !- Field 2
Until: 07:00,0.04915625, !- Field 3
Until: 08:00,0.04915625, !- Field 5
Until: 09:00,0.49814375, !- Field 7
Until: 20:00,0.89665875, !- Field 9
Until: 21:00,0.49814375, !- Field 11
Until: 24:00,0.04915625, !- Field 13
For: Saturday, !- Field 15
Until: 07:00,0.04915625, !- Field 16
Until: 08:00,0.04915625, !- Field 18
Until: 09:00,0.49814375, !- Field 20
Until: 12:00,0.89665875, !- Field 22
Until: 18:00,0.89665875, !- Field 24
Until: 19:00,0.49814375, !- Field 26
Until: 24:00,0.04915625, !- Field 28
For: SummerDesignDay, !- Field 30
Until: 24:00,1.0, !- Field 31
For: WinterDesignDay, !- Field 33
Until: 24:00,0.0, !- Field 34
For: Sunday Holidays AllOtherDays, !- Field 36
Until: 08:00,0.04915625, !- Field 37
Until: 09:00,0.049814375, !- Field 39
Until: 10:00,0.49814375, !- Field 41
Until: 17:00,0.89665875, !- Field 43
Until: 18:00,0.49814375, !- Field 45
Until: 24:00,0.04915625; !- Field 47
Schedule:Compact,
Type3_EQUIP_SCH, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays, !- Field 2
Until: 08:00,0.04915625, !- Field 3
Until: 09:00,0.04915625, !- Field 5
Until: 10:00,0.49814375, !- Field 7
Until: 20:00,0.89665875, !- Field 9
Until: 21:00,0.49814375, !- Field 11
Until: 24:00,0.04915625, !- Field 13
For: Saturday, !- Field 15
Until: 08:00,0.04915625, !- Field 16
Until: 09:00,0.04915625, !- Field 18
Until: 10:00,0.49814375, !- Field 20
Until: 12:00,0.89665875, !- Field 22
Until: 18:00,0.89665875, !- Field 24
Until: 19:00,0.49814375, !- Field 26
Until: 21:00,0.04915625, !- Field 28
Until: 22:00,0.04915625, !- Field 30
Until: 24:00,0.04915625, !- Field 32
For: SummerDesignDay, !- Field 34
Until: 24:00,1.0, !- Field 35
For: WinterDesignDay, !- Field 37
Until: 24:00,0.0, !- Field 38
For: Sunday Holidays AllOtherDays, !- Field 40
Until: 09:00,0.04915625, !- Field 41
Until: 10:00,0.04915625, !- Field 43
Until: 11:00,0.49814375, !- Field 45
Until: 17:00,0.89665875, !- Field 47
Until: 18:00,0.49814375, !- Field 49
Until: 24:00,0.04915625; !- Field 51
Schedule:Compact,
Type1_Infil_SCH, !- Name
fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Monday Tuesday Wednesday Thursday SummerDesignDay, !- Field 2
Until: 08:00,1.0, !- Field 3
Until: 24:00,0.25, !- Field 5
For: Friday Saturday, !- Field 7
Until: 01:00,0.25, !- Field 8
Until: 08:00,1.0, !- Field 10
Until: 24:00,0.25, !- Field 12
For: WinterDesignDay, !- Field 14
Until: 01:00,0.25, !- Field 15
Until: 08:00,1.0, !- Field 17
Until: 24:00,0.25, !- Field 19
For: Sunday Holidays AllOtherDays, !- Field 21
Until: 08:00,1.0, !- Field 22
Until: 24:00,0.25; !- Field 24
Schedule:Compact,
Type2_Infil_SCH, !- Name
fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until: 07:00,1.0, !- Field 3
Until: 21:00,0.25, !- Field 5
Until: 24:00,1.0, !- Field 7
For: Saturday, !- Field 9
Until: 07:00,1.0, !- Field 10
Until: 19:00,0.25, !- Field 12
Until: 24:00,1.0, !- Field 14
For: WinterDesignDay, !- Field 16
Until: 07:00,1.0, !- Field 17
Until: 19:00,0.25, !- Field 19
Until: 24:00,1.0, !- Field 21
For: Sunday Holidays AllOtherDays, !- Field 23
Until: 08:00,1.0, !- Field 24
Until: 18:00,0.25, !- Field 26
Until: 24:00,1.0; !- Field 28
Schedule:Compact,
Type3_Infil_SCH, !- Name
fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until: 08:00,1.0, !- Field 3
Until: 21:00,0.25, !- Field 5
Until: 24:00,1.0, !- Field 7
For: Saturday, !- Field 9
Until: 08:00,1.0, !- Field 10
Until: 19:00,0.25, !- Field 12
Until: 24:00,1.0, !- Field 14
For: WinterDesignDay, !- Field 16
Until: 08:00,1.0, !- Field 17
Until: 19:00,0.25, !- Field 19
Until: 24:00,1.0, !- Field 21
For: Sunday Holidays AllOtherDays, !- Field 23
Until: 09:00,1.0, !- Field 24
Until: 18:00,0.25, !- Field 26
Until: 24:00,1.0; !- Field 28
Schedule:Compact,
INFIL_Door_Opening_SCH, !- Name
fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 08:00,0.0, !- Field 3
Until: 12:00,0.131,!- Field 6
Until: 18:00,1.0, !- Field 6
Until: 20:00,0.131,!- Field 10
Until: 24:00,0.0; !- Field 9
Schedule:Compact,
Type1_HTGSETP_SCH_YES_OPTIMUM, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Monday Tuesday Wednesday Thursday WinterDesignDay, !- Field 2
Until: 01:00,21.11, !- Field 3
Until: 08:00,15.56, !- Field 5
Until: 09:00,18.33, !- Field 7
Until: 23:00,21.11, !- Field 9
Until: 24:00,21.11, !- Field 11
For SummerDesignDay, !- Field 13
Until: 24:00,15.56, !- Field 14
For: Friday Saturday, !- Field 16
Until: 08:00,15.56, !- Field 17
Until: 09:00,18.33, !- Field 19
Until: 23:00,21.11, !- Field 21
Until: 24:00,21.11, !- Field 23
For: Sunday Holidays AllOtherDays, !- Field 25
Until: 8:00,15.56, !- Field 26
Until: 9:00,18.33, !- Field 28
Until: 23:00,21.11, !- Field 30
Until: 24:00,21.11; !- Field 32
Schedule:Compact,
Type1_HTGSETP_SCH_NO_OPTIMUM, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: WinterDesignDay, !- Field 2
Until: 01:00,21.11, !- Field 3
Until: 08:00,15.56, !- Field 5
Until: 09:00,18.33, !- Field 7
Until: 23:00,21.11, !- Field 9
Until: 24:00,21.11, !- Field 11
For: Monday Tuesday Wednesday Thursday, !- Field 13
Until: 01:00,21.11, !- Field 14
Until: 08:00,15.56, !- Field 16
Until: 09:00,21.11, !- Field 18
Until: 23:00,21.11, !- Field 20
Until: 24:00,21.11, !- Field 22
For SummerDesignDay, !- Field 24
Until: 24:00,15.56, !- Field 25
For: Friday Saturday, !- Field 27
Until: 08:00,15.56, !- Field 28
Until: 09:00,21.11, !- Field 30
Until: 23:00,21.11, !- Field 32
Until: 24:00,21.11, !- Field 34
For: Sunday Holidays AllOtherDays, !- Field 36
Until: 8:00,15.56, !- Field 37
Until: 9:00,21.11, !- Field 39
Until: 23:00,21.11, !- Field 41
Until: 24:00,21.11; !- Field 43
Schedule:Compact,
Type2_HTGSETP_SCH_YES_OPTIMUM, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays WinterDesignDay, !- Field 2
Until: 07:00,15.56, !- Field 3
Until: 08:00,18.33, !- Field 5
Until: 21:00,21.11, !- Field 7
Until: 24:00,15.56, !- Field 9
For SummerDesignDay, !- Field 11
Until: 24:00,15.56, !- Field 12
For: Saturday, !- Field 14
Until: 07:00,15.56, !- Field 15
Until: 08:00,18.33, !- Field 17
Until: 19:00,21.11, !- Field 19
Until: 24:00,15.56, !- Field 21
For: Sunday Holidays AllOtherDays, !- Field 23
Until: 8:00,15.56, !- Field 24
Until: 9:00,18.33, !- Field 26
Until: 18:00,21.11, !- Field 28
Until: 24:00,15.56; !- Field 30
Schedule:Compact,
Type2_HTGSETP_SCH_NO_OPTIMUM, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: WinterDesignDay, !- Field 2
Until: 07:00,15.56, !- Field 3
Until: 08:00,18.33, !- Field 5
Until: 21:00,21.11, !- Field 7
Until: 24:00,15.56, !- Field 9
For: Weekdays, !- Field 11
Until: 07:00,15.56, !- Field 12
Until: 08:00,21.11, !- Field 14
Until: 21:00,21.11, !- Field 16
Until: 24:00,15.56, !- Field 18
For SummerDesignDay, !- Field 20
Until: 24:00,15.56, !- Field 21
For: Saturday, !- Field 23
Until: 07:00,15.56, !- Field 24
Until: 08:00,21.11, !- Field 26
Until: 19:00,21.11, !- Field 28
Until: 24:00,15.56, !- Field 30
For: Sunday Holidays AllOtherDays, !- Field 32
Until: 8:00,15.56, !- Field 33
Until: 9:00,21.11, !- Field 35
Until: 18:00,21.11, !- Field 37
Until: 24:00,15.56; !- Field 39
Schedule:Compact,
Type3_HTGSETP_SCH_YES_OPTIMUM, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays WinterDesignDay, !- Field 2
Until: 08:00,15.56, !- Field 3
Until: 09:00,18.33, !- Field 5
Until: 21:00,21.11, !- Field 7
Until: 24:00,15.56, !- Field 9
For SummerDesignDay, !- Field 11
Until: 24:00,15.56, !- Field 12
For: Saturday, !- Field 14
Until: 08:00,15.56, !- Field 15
Until: 09:00,18.33, !- Field 17
Until: 19:00,21.11, !- Field 19
Until: 24:00,15.56, !- Field 21
For: Sunday Holidays AllOtherDays, !- Field 23
Until: 9:00,15.56, !- Field 24
Until: 10:00,18.33, !- Field 26
Until: 18:00,21.11, !- Field 28
Until: 24:00,15.56; !- Field 30
Schedule:Compact,
Type3_HTGSETP_SCH_NO_OPTIMUM, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: WinterDesignDay, !- Field 2
Until: 08:00,15.56, !- Field 3
Until: 09:00,18.33, !- Field 5
Until: 21:00,21.11, !- Field 7
Until: 24:00,15.56, !- Field 9
For: Weekdays, !- Field 11
Until: 08:00,15.56, !- Field 12
Until: 09:00,21.11, !- Field 14
Until: 21:00,21.11, !- Field 16
Until: 24:00,15.56, !- Field 18
For SummerDesignDay, !- Field 20
Until: 24:00,15.56, !- Field 21
For: Saturday, !- Field 23
Until: 08:00,15.56, !- Field 24
Until: 09:00,21.11, !- Field 26
Until: 19:00,21.11, !- Field 28
Until: 24:00,15.56, !- Field 30
For: Sunday Holidays AllOtherDays, !- Field 32
Until: 9:00,15.56, !- Field 33
Until: 10:00,21.11, !- Field 35
Until: 18:00,21.11, !- Field 37
Until: 24:00,15.56; !- Field 39
Schedule:Compact,
Type1_CLGSETP_SCH_YES_OPTIMUM, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Monday Tuesday Wednesday Thursday SummerDesignDay, !- Field 2
Until: 08:00,29.44, !- Field 3
Until: 09:00,26.67, !- Field 5
Until: 23:00,23.89, !- Field 7
Until: 24:00,23.89, !- Field 9
For WinterDesignDay, !- Field 11
Until: 24:00,29.44, !- Field 12
For: Friday Saturday, !- Field 14
Until: 01:00,23.89, !- Field 15
Until: 08:00,29.44, !- Field 17
Until: 09:00,26.67, !- Field 19
Until: 23:00,23.89, !- Field 21
Until: 24:00,23.89, !- Field 23
For: Sunday Holidays AllOtherDays, !- Field 25
Until: 8:00,29.44, !- Field 26
Until: 8:00,26.67, !- Field 28
Until: 23:00,23.89, !- Field 30
Until: 24:00,23.89; !- Field 32
Schedule:Compact,
Type1_CLGSETP_SCH_NO_OPTIMUM, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: SummerDesignDay, !- Field 2
Until: 08:00,29.44, !- Field 3
Until: 09:00,26.67, !- Field 5
Until: 23:00,23.89, !- Field 7
Until: 24:00,23.89, !- Field 9
For: Monday Tuesday Wednesday Thursday, !- Field 11
Until: 08:00,29.44, !- Field 12
Until: 09:00,23.89, !- Field 14
Until: 23:00,23.89, !- Field 16
Until: 24:00,23.89, !- Field 18
For WinterDesignDay, !- Field 20
Until: 24:00,29.44, !- Field 21
For: Friday Saturday, !- Field 23
Until: 01:00,23.89, !- Field 24
Until: 08:00,29.44, !- Field 26
Until: 09:00,23.89, !- Field 28
Until: 23:00,23.89, !- Field 30
Until: 24:00,23.89, !- Field 32
For: Sunday Holidays AllOtherDays, !- Field 34
Until: 8:00,29.44, !- Field 35
Until: 8:00,26.67, !- Field 37
Until: 23:00,23.89, !- Field 39
Until: 24:00,23.89; !- Field 41
Schedule:Compact,
Type1_CLGSETP_SCH_NO_SETBACK, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: SummerDesignDay, !- Field 2
Until: 08:00,29.44, !- Field 3
Until: 09:00,26.67, !- Field 5
Until: 23:00,23.89, !- Field 7
Until: 24:00,23.89, !- Field 9
For: Monday Tuesday Wednesday Thursday, !- Field 11
Until: 08:00,23.89, !- Field 12
Until: 09:00,23.89, !- Field 14
Until: 23:00,23.89, !- Field 16
Until: 24:00,23.89, !- Field 18
For WinterDesignDay, !- Field 20
Until: 24:00,29.44, !- Field 21
For: Friday Saturday, !- Field 23
Until: 01:00,23.89, !- Field 24
Until: 08:00,23.89, !- Field 26
Until: 09:00,23.89, !- Field 28
Until: 23:00,23.89, !- Field 30
Until: 24:00,23.89, !- Field 32
For: Sunday Holidays AllOtherDays, !- Field 34
Until: 8:00,23.89, !- Field 35
Until: 8:00,23.89, !- Field 37
Until: 23:00,23.89, !- Field 39
Until: 24:00,23.89; !- Field 41
Schedule:Compact,
Type2_CLGSETP_SCH_YES_OPTIMUM, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until: 07:00,29.44, !- Field 3
Until: 08:00,26.67, !- Field 5
Until: 20:00,23.89, !- Field 7
Until: 24:00,29.44, !- Field 9
For WinterDesignDay, !- Field 11
Until: 24:00,29.44, !- Field 12
For: Saturday, !- Field 14
Until: 07:00,29.44, !- Field 15
Until: 08:00,26.67, !- Field 17
Until: 18:00,23.89, !- Field 19
Until: 24:00,29.44, !- Field 21
For: Sunday Holidays AllOtherDays, !- Field 23
Until: 8:00,29.44, !- Field 24
Until: 9:00,26.67, !- Field 26
Until: 17:00,23.89, !- Field 28
Until: 24:00,29.44; !- Field 30
Schedule:Compact,
Type2_CLGSETP_SCH_NO_OPTIMUM, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: SummerDesignDay, !- Field 2
Until: 07:00,29.44, !- Field 3
Until: 08:00,26.67, !- Field 5
Until: 20:00,23.89, !- Field 7
Until: 24:00,29.44, !- Field 9
For: Weekdays, !- Field 11
Until: 07:00,29.44, !- Field 12
Until: 08:00,23.89, !- Field 14
Until: 20:00,23.89, !- Field 16
Until: 24:00,29.44, !- Field 18
For WinterDesignDay, !- Field 20
Until: 24:00,29.44, !- Field 21
For: Saturday, !- Field 23
Until: 07:00,29.44, !- Field 24
Until: 08:00,23.89, !- Field 26
Until: 18:00,23.89, !- Field 28
Until: 24:00,29.44, !- Field 30
For: Sunday Holidays AllOtherDays, !- Field 32
Until: 8:00,29.44, !- Field 33
Until: 9:00,23.89, !- Field 35
Until: 17:00,23.89, !- Field 37
Until: 24:00,29.44; !- Field 39
Schedule:Compact,
Type2_CLGSETP_SCH_NO_SETBACK, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: SummerDesignDay, !- Field 2
Until: 07:00,29.44, !- Field 3
Until: 08:00,26.67, !- Field 5
Until: 20:00,23.89, !- Field 7
Until: 24:00,29.44, !- Field 9
For: Weekdays, !- Field 11
Until: 07:00,23.89, !- Field 12
Until: 08:00,23.89, !- Field 14
Until: 20:00,23.89, !- Field 16
Until: 24:00,23.89, !- Field 18
For WinterDesignDay, !- Field 20
Until: 24:00,29.44, !- Field 21
For: Saturday, !- Field 23
Until: 07:00,23.89, !- Field 24
Until: 08:00,23.89, !- Field 26
Until: 18:00,23.89, !- Field 28
Until: 24:00,23.89, !- Field 30
For: Sunday Holidays AllOtherDays, !- Field 32
Until: 8:00,23.89, !- Field 33
Until: 9:00,23.89, !- Field 35
Until: 17:00,23.89, !- Field 37
Until: 24:00,23.89; !- Field 39
Schedule:Compact,
Type3_CLGSETP_SCH_YES_OPTIMUM, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until: 08:00,29.44, !- Field 3
Until: 09:00,26.67, !- Field 5
Until: 21:00,23.89, !- Field 7
Until: 24:00,29.44, !- Field 9
For WinterDesignDay, !- Field 11
Until: 24:00,29.44, !- Field 12
For: Saturday, !- Field 14
Until: 08:00,29.44, !- Field 15
Until: 09:00,26.67, !- Field 17
Until: 18:00,23.89, !- Field 19
Until: 24:00,29.44, !- Field 21
For: Sunday Holidays AllOtherDays, !- Field 23
Until: 9:00,29.44, !- Field 24
Until: 10:00,26.67, !- Field 26
Until: 17:00,23.89, !- Field 28
Until: 24:00,29.44; !- Field 30
Schedule:Compact,
Type3_CLGSETP_SCH_NO_OPTIMUM, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: SummerDesignDay, !- Field 2
Until: 08:00,29.44, !- Field 3
Until: 09:00,26.67, !- Field 5
Until: 21:00,23.89, !- Field 7
Until: 24:00,29.44, !- Field 9
For: Weekdays, !- Field 11
Until: 08:00,29.44, !- Field 12
Until: 09:00,23.89, !- Field 14
Until: 21:00,23.89, !- Field 16
Until: 24:00,29.44, !- Field 18
For WinterDesignDay, !- Field 20
Until: 24:00,29.44, !- Field 21
For: Saturday, !- Field 23
Until: 08:00,29.44, !- Field 24
Until: 09:00,23.89, !- Field 26
Until: 18:00,23.89, !- Field 28
Until: 24:00,29.44, !- Field 30
For: Sunday Holidays AllOtherDays, !- Field 32
Until: 9:00,29.44, !- Field 33
Until: 10:00,23.89, !- Field 35
Until: 17:00,23.89, !- Field 37
Until: 24:00,29.44; !- Field 39
Schedule:Compact,
Type3_CLGSETP_SCH_NO_SETBACK, !- Name
Temperature, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: SummerDesignDay, !- Field 2
Until: 08:00,29.44, !- Field 3
Until: 09:00,26.67, !- Field 5
Until: 21:00,23.89, !- Field 7
Until: 24:00,29.44, !- Field 9
For: Weekdays, !- Field 11
Until: 08:00,23.89, !- Field 12
Until: 09:00,23.89, !- Field 14
Until: 21:00,23.89, !- Field 16
Until: 24:00,23.89, !- Field 18
For WinterDesignDay, !- Field 20
Until: 24:00,29.44, !- Field 21
For: Saturday, !- Field 23
Until: 08:00,23.89, !- Field 24
Until: 09:00,23.89, !- Field 26
Until: 18:00,23.89, !- Field 28
Until: 24:00,23.89, !- Field 30
For: Sunday Holidays AllOtherDays, !- Field 32
Until: 9:00,23.89, !- Field 33
Until: 10:00,23.89, !- Field 35
Until: 17:00,23.89, !- Field 37
Until: 24:00,23.89; !- Field 39
Schedule:Compact,
Type1_FAN_SCH, !- Name
on/off, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Monday Tuesday Wednesday Thursday SummerDesignDay, !- Field 2
Until: 08:00,0.0, !- Field 3
Until: 23:00,1.0, !- Field 5
Until: 24:00,1.0, !- Field 7
For: Friday Saturday WinterDesignDay, !- Field 9
Until: 01:00,1.0, !- Field 10
Until: 08:00,0.0, !- Field 12
Until: 22:00,1.0, !- Field 14
Until: 24:00,1.0, !- Field 16
For: Sunday Holidays AllOtherDays, !- Field 18
Until: 08:00,0.0, !- Field 19
Until: 23:00,1.0, !- Field 21
Until: 24:00,1.0; !- Field 23
Schedule:Compact,
Type2_FAN_SCH, !- Name
on/off, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until: 07:00,0.0, !- Field 3
Until: 21:00,1.0, !- Field 5
Until: 24:00,0.0, !- Field 7
For: Saturday WinterDesignDay, !- Field 9
Until: 07:00,0.0, !- Field 10
Until: 19:00,1.0, !- Field 12
Until: 24:00,0.0, !- Field 14
For: Sunday Holidays AllOtherDays, !- Field 16
Until: 08:00,0.0, !- Field 17
Until: 18:00,1.0, !- Field 19
Until: 24:00,0.0; !- Field 21
Schedule:Compact,
Type3_FAN_SCH, !- Name
on/off, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until: 08:00,0.0, !- Field 3
Until: 21:00,1.0, !- Field 5
Until: 24:00,0.0, !- Field 7
For: Saturday WinterDesignDay, !- Field 9
Until: 08:00,0.0, !- Field 10
Until: 19:00,1.0, !- Field 12
Until: 24:00,0.0, !- Field 14
For: Sunday Holidays AllOtherDays, !- Field 16
Until: 09:00,0.0, !- Field 17
Until: 18:00,1.0, !- Field 19
Until: 24:00,0.0; !- Field 21
Schedule:Compact,
Type1_MinOA_MotorizedDamper_SCH, !- Name
fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Monday Tuesday Wednesday Thursday SummerDesignDay, !- Field 2
Until: 09:00,0.0, !- Field 3
Until: 23:00,1.0, !- Field 5
Until: 24:00,1.0, !- Field 7
For: Friday Saturday WinterDesignDay, !- Field 9
Until: 01:00,1.0, !- Field 10
Until: 09:00,0.0, !- Field 12
Until: 22:00,1.0, !- Field 14
Until: 24:00,1.0, !- Field 16
For: Sunday Holidays AllOtherDays, !- Field 18
Until: 09:00,0.0, !- Field 19
Until: 23:00,1.0, !- Field 21
Until: 24:00,1.0; !- Field 23
Schedule:Compact,
Type2_MinOA_MotorizedDamper_SCH, !- Name
fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until: 08:00,0.0, !- Field 3
Until: 21:00,1.0, !- Field 5
Until: 24:00,0.0, !- Field 7
For: Saturday WinterDesignDay, !- Field 9
Until: 08:00,0.0, !- Field 10
Until: 19:00,1.0, !- Field 12
Until: 24:00,0.0, !- Field 14
For: Sunday Holidays AllOtherDays, !- Field 16
Until: 09:00,0.0, !- Field 17
Until: 18:00,1.0, !- Field 19
Until: 24:00,0.0; !- Field 21
Schedule:Compact,
Type3_MinOA_MotorizedDamper_SCH, !- Name
fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until: 09:00,0.0, !- Field 3
Until: 21:00,1.0, !- Field 5
Until: 24:00,0.0, !- Field 7
For: Saturday WinterDesignDay, !- Field 9
Until: 09:00,0.0, !- Field 10
Until: 19:00,1.0, !- Field 12
Until: 24:00,0.0, !- Field 14
For: Sunday Holidays AllOtherDays, !- Field 16
Until: 10:00,0.0, !- Field 17
Until: 18:00,1.0, !- Field 19
Until: 24:00,0.0; !- Field 21
Schedule:Compact,
Type1_SWH_SCH, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Monday Tuesday Wednesday Thursday SummerDesignDay, !- Field 2
Until: 01:00,0.00, !- Field 3
Until: 03:00,0.00, !- Field 5
Until: 07:00,0.00, !- Field 7
Until: 09:00,0.04, !- Field 9
Until: 10:00,0.15, !- Field 11
Until: 11:00,0.23, !- Field 13
Until: 12:00,0.32, !- Field 15
Until: 13:00,0.41, !- Field 17
Until: 14:00,0.62, !- Field 19
Until: 15:00,0.60, !- Field 21
Until: 16:00,0.55, !- Field 23
Until: 17:00,0.45, !- Field 25
Until: 18:00,0.50, !- Field 27
Until: 19:00,0.46, !- Field 29
Until: 20:00,0.47, !- Field 31
Until: 21:00,0.34, !- Field 33
Until: 22:00,0.33, !- Field 35
Until: 23:00,0.23, !- Field 37
Until: 24:00,0.13, !- Field 39
For: Friday Saturday WinterDesignDay, !- Field 41
Until: 01:00,0.13, !- Field 42
Until: 02:00,0.00, !- Field 44
Until: 03:00,0.00, !- Field 46
Until: 07:00,0.00, !- Field 48
Until: 08:00,0.00, !- Field 50
Until: 09:00,0.00, !- Field 52
Until: 10:00,0.20, !- Field 54
Until: 11:00,0.23, !- Field 56
Until: 12:00,0.32, !- Field 58
Until: 13:00,0.41, !- Field 60
Until: 14:00,0.65, !- Field 62
Until: 15:00,0.6, !- Field 64
Until: 16:00,0.55, !- Field 66
Until: 17:00,0.45, !- Field 68
Until: 18:00,0.50, !- Field 70
Until: 19:00,0.46, !- Field 72
Until: 20:00,0.47, !- Field 74
Until: 21:00,0.34, !- Field 76
Until: 22:00,0.33, !- Field 78
Until: 23:00,0.23, !- Field 80
Until: 24:00,0.13, !- Field 82
For: Sunday Holidays AllOtherDays, !- Field 84
Until: 01:00,0.00, !- Field 85
Until: 03:00,0.00, !- Field 87
Until: 07:00,0.00, !- Field 89
Until: 08:00,0.00, !- Field 91
Until: 09:00,0.1, !- Field 93
Until: 10:00,0.14, !- Field 95
Until: 11:00,0.29, !- Field 97
Until: 12:00,0.31, !- Field 99
Until: 14:00,0.36, !- Field 101
Until: 15:00,0.34, !- Field 103
Until: 16:00,0.35, !- Field 105
Until: 17:00,0.37, !- Field 107
Until: 18:00,0.34, !- Field 109
Until: 19:00,0.25, !- Field 111
Until: 20:00,0.27, !- Field 113
Until: 21:00,0.21, !- Field 115
Until: 22:00,0.16, !- Field 117
Until: 23:00,0.16, !- Field 119
Until: 24:00,0.1; !- Field 121
Schedule:Compact,
Type2_SWH_SCH, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until: 01:00,0.00, !- Field 3
Until: 03:00,0.00, !- Field 5
Until: 08:00,0.00, !- Field 7
Until: 09:00,0.15, !- Field 9
Until: 10:00,0.23, !- Field 11
Until: 11:00,0.32, !- Field 13
Until: 12:00,0.41, !- Field 15
Until: 13:00,0.57, !- Field 17
Until: 14:00,0.62, !- Field 19
Until: 15:00,0.61, !- Field 21
Until: 16:00,0.50, !- Field 23
Until: 17:00,0.45, !- Field 25
Until: 18:00,0.46, !- Field 27
Until: 19:00,0.47, !- Field 29
Until: 20:00,0.42, !- Field 31
Until: 21:00,0.34, !- Field 33
Until: 22:00,0.00, !- Field 35
Until: 23:00,0.00, !- Field 37
Until: 24:00,0.00, !- Field 39
For: Saturday WinterDesignDay, !- Field 41
Until: 01:00,0.00, !- Field 42
Until: 02:00,0.00, !- Field 44
Until: 03:00,0.00, !- Field 46
Until: 07:00,0.00, !- Field 48
Until: 08:00,0.00, !- Field 50
Until: 09:00,0.2, !- Field 52
Until: 10:00,0.24, !- Field 54
Until: 11:00,0.27, !- Field 56
Until: 12:00,0.42, !- Field 58
Until: 13:00,0.54, !- Field 60
Until: 14:00,0.62, !- Field 62
Until: 15:00,0.6, !- Field 64
Until: 16:00,0.50, !- Field 66
Until: 17:00,0.48, !- Field 68
Until: 18:00,0.47, !- Field 70
Until: 19:00,0.34, !- Field 72
Until: 20:00,0.00, !- Field 74
Until: 21:00,0.00, !- Field 76
Until: 22:00,0.00, !- Field 78
Until: 23:00,0.00, !- Field 80
Until: 24:00,0.00, !- Field 82
For: Sunday Holidays AllOtherDays, !- Field 84
Until: 01:00,0.00, !- Field 85
Until: 03:00,0.00, !- Field 87
Until: 07:00,0.00, !- Field 89
Until: 08:00,0.00, !- Field 91
Until: 09:00,0.00, !- Field 93
Until: 10:00,0.12, !- Field 95
Until: 11:00,0.14, !- Field 97
Until: 12:00,0.29, !- Field 99
Until: 13:00,0.33, !- Field 101
Until: 14:00,0.40, !- Field 103
Until: 15:00,0.36, !- Field 105
Until: 16:00,0.37, !- Field 107
Until: 17:00,0.35, !- Field 109
Until: 18:00,0.37, !- Field 111
Until: 19:00,0.00, !- Field 113
Until: 21:00,0.00, !- Field 115
Until: 22:00,0.00, !- Field 117
Until: 23:00,0.00, !- Field 119
Until: 24:00,0.00; !- Field 121
Schedule:Compact,
Type3_SWH_SCH, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until: 01:00,0.00, !- Field 3
Until: 03:00,0.00, !- Field 5
Until: 07:00,0.00, !- Field 7
Until: 09:00,0.00, !- Field 9
Until: 10:00,0.15, !- Field 11
Until: 11:00,0.25, !- Field 13
Until: 12:00,0.41, !- Field 15
Until: 13:00,0.57, !- Field 17
Until: 14:00,0.62, !- Field 19
Until: 15:00,0.61, !- Field 21
Until: 16:00,0.50, !- Field 23
Until: 17:00,0.45, !- Field 25
Until: 18:00,0.46, !- Field 27
Until: 19:00,0.47, !- Field 29
Until: 20:00,0.42, !- Field 31
Until: 21:00,0.34, !- Field 33
Until: 22:00,0.00, !- Field 35
Until: 23:00,0.00, !- Field 37
Until: 24:00,0.00, !- Field 39
For: Saturday WinterDesignDay, !- Field 41
Until: 01:00,0.00, !- Field 42
Until: 02:00,0.00, !- Field 44
Until: 03:00,0.00, !- Field 46
Until: 07:00,0.00, !- Field 48
Until: 08:00,0.00, !- Field 50
Until: 09:00,0.00, !- Field 52
Until: 10:00,0.20, !- Field 54
Until: 11:00,0.27, !- Field 56
Until: 12:00,0.42, !- Field 58
Until: 13:00,0.54, !- Field 60
Until: 14:00,0.59, !- Field 62
Until: 15:00,0.6, !- Field 64
Until: 16:00,0.49, !- Field 66
Until: 17:00,0.48, !- Field 68
Until: 18:00,0.47, !- Field 70
Until: 19:00,0.46, !- Field 72
Until: 20:00,0.00, !- Field 74
Until: 21:00,0.00, !- Field 76
Until: 22:00,0.00, !- Field 78
Until: 23:00,0.00, !- Field 80
Until: 24:00,0.00, !- Field 82
For: Sunday Holidays AllOtherDays, !- Field 84
Until: 01:00,0.00, !- Field 85
Until: 03:00,0.00, !- Field 87
Until: 07:00,0.00, !- Field 89
Until: 08:00,0.00, !- Field 91
Until: 09:00,0.00, !- Field 93
Until: 10:00,0.00, !- Field 95
Until: 11:00,0.12, !- Field 97
Until: 12:00,0.29, !- Field 99
Until: 13:00,0.31, !- Field 101
Until: 15:00,0.36, !- Field 103
Until: 16:00,0.34, !- Field 105
Until: 17:00,0.35, !- Field 107
Until: 18:00,0.37, !- Field 109
Until: 19:00,0.00, !- Field 111
Until: 20:00,0.00, !- Field 113
Until: 22:00,0.00, !- Field 115
Until: 23:00,0.00, !- Field 117
Until: 24:00,0.00; !- Field 119
Schedule:Compact,
ALWAYS_ON, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,1.0; !- Field 3
Schedule:Compact,
Exterior_Lgt_ALWAYS_ON, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,1; !- Field 3
Schedule:Compact,
Exterior_Lgt_189_1, !- Name
Fraction, !- Schedule Type Limits Name
Through:12/31, !- Field 1
For:Weekdays, !- Field 2
Until: 9:00,0.5, !- Field 3
Until: 24:00,1.0, !- Field 5
For:Saturday, !- Field 7
Until: 9:00,0.5, !- Field 8
Until: 24:00,1.0, !- Field 10
For:Sunday Holidays AllOtherDays, !- Field 12
Until: 9:00,0.5, !- Field 13
Until: 24:00,1.0; !- Field 15
Schedule:Compact,
MinOA_Sched, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,1.0; !- Field 3
Schedule:Compact,
Dual Zone Control Type Sched, !- Name
Control Type, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,4; !- Field 3
Schedule:Compact,
ACTIVITY_SCH, !- Name
Any Number, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,120.; !- Field 3
Schedule:Compact,
WORK_EFF_SCH, !- Name
Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,0.0; !- Field 3
Schedule:Compact,
AIR_VELO_SCH, !- Name
Any Number, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,0.2; !- Field 3
Schedule:Compact,
CLOTHING_SCH, !- Name
Any Number, !- Schedule Type Limits Name
Through: 04/30, !- Field 1
For: AllDays, !- Field 2
Until: 24:00,1.0, !- Field 3
Through: 09/30, !- Field 5
For: AllDays, !- Field 6
Until: 24:00,0.5, !- Field 7
Through: 12/31, !- Field 9
For: AllDays, !- Field 10
Until: 24:00,1.0; !- Field 11
Schedule:Compact,
Hot Water Setpoint Temp Schedule, !- Name
Any Number, !- Schedule Type Limits Name
THROUGH: 12/31, !- Field 1
FOR: AllDays, !- Field 2
UNTIL: 24:00,60.0; !- Field 3
Schedule:Constant,SZ_system_OA_Max_Frac_SCH,Fraction,
0.75;
Construction:FfactorGroundFloor,
LGstore1_Floor_Ffactor, !- Name
0.88281, !- F-Factor
348.3864, !- Area
53.34; !- PerimeterExposed
Construction:FfactorGroundFloor,
SMstore1_Floor_Ffactor, !- Name
0.88281, !- F-Factor
174.19320000000005, !- Area
15.239999999999998; !- PerimeterExposed
Construction:FfactorGroundFloor,
SMstore2_Floor_Ffactor, !- Name
0.88281, !- F-Factor
174.19319999999993, !- Area
15.240000000000002; !- PerimeterExposed
Construction:FfactorGroundFloor,
SMstore3_Floor_Ffactor, !- Name
0.88281, !- F-Factor
174.19320000000005, !- Area
15.240000000000002; !- PerimeterExposed
Construction:FfactorGroundFloor,
SMstore4_Floor_Ffactor, !- Name
0.88281, !- F-Factor
174.19320000000005, !- Area
15.239999999999995; !- PerimeterExposed
Construction:FfactorGroundFloor,
LGstore2_Floor_Ffactor, !- Name
0.88281, !- F-Factor
348.38639999999987, !- Area
30.480000000000004; !- PerimeterExposed
Construction:FfactorGroundFloor,
SMstore5_Floor_Ffactor, !- Name
0.88281, !- F-Factor
174.19319999999993, !- Area
15.239999999999995; !- PerimeterExposed
Construction:FfactorGroundFloor,
SMstore6_Floor_Ffactor, !- Name
0.88281, !- F-Factor
174.19320000000016, !- Area
15.240000000000009; !- PerimeterExposed
Construction:FfactorGroundFloor,
SMstore7_Floor_Ffactor, !- Name
0.88281, !- F-Factor
174.1931999999997, !- Area
15.23999999999998; !- PerimeterExposed
Construction:FfactorGroundFloor,
SMstore8_Floor_Ffactor, !- Name
0.88281, !- F-Factor
174.1932000000004, !- Area
38.10000000000001; !- PerimeterExposed
Zone,
LGstore1, !- Name
0.0000, !- Direction of Relative North {deg}
0.0000, !- X Origin {m}
0.0000, !- Y Origin {m}
0.0000, !- Z Origin {m}
1, !- Type
1.0000, !- Multiplier
-9999.0000, !- Ceiling Height {m}
1805.2000, !- Volume {m3}
autocalculate, !- Floor Area {m2}
, !- Zone Inside Convection Algorithm
, !- Zone Outside Convection Algorithm
Yes; !- Part of Total Floor Area
BuildingSurface:Detailed,
LGstore1_Floor, !- Name
Floor, !- Surface Type
LGstore1_Floor_Ffactor, !- Construction Name
LGstore1, !- Zone Name
GroundFCfactorMethod, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
0.0000,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m}
15.2400,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
15.2400,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
LGstore1_Wall_2, !- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
LGstore1, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
0.0000,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
0.0000,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
0.0000,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
LGstore1_Roof, !- Name
Roof, !- Surface Type
nonres_roof, !- Construction Name
LGstore1, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
15.2400,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
0.0000,22.8600,5.1800, !- X,Y,Z ==> Vertex 2 {m}
0.0000,0.0000,5.1800, !- X,Y,Z ==> Vertex 3 {m}
15.2400,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
LGstore1_Wall_3, !- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
LGstore1, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
15.2400,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
15.2400,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
0.0000,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
0.0000,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m}
!- =========== ALL OBJECTS IN CLASS: FENESTRATIONSURFACE:DETAILED ===========
FenestrationSurface:Detailed,
LGstore1_Wall_3_Door_1, !- Name
Door, !- Surface Type
Swinging Door_con, !- Construction Name
LGstore1_Wall_3, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
4.730,22.8600,2.1300, !- X,Y,Z ==> Vertex 1 {m}
4.730,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
2.900,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
2.900,22.8600,2.1300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
LGstore1_Wall_3_Door_2, !- Name
Door, !- Surface Type
Swinging Door_con, !- Construction Name
LGstore1_Wall_3, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
12.350,22.8600,2.1300, !- X,Y,Z ==> Vertex 1 {m}
12.350,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
10.520,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
10.520,22.8600,2.1300; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
LGstore1_Wall_4, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
LGstore1, !- Zone Name
Surface, !- Outside Boundary Condition
SMstore1_Wall_2, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
15.2400,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m}
15.2400,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
15.2400,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
15.2400,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
LGstore1_Wall_1, !- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
LGstore1, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
0.0000,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m}
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
15.2400,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
15.2400,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
LGstore1_Wall_1_Window_1,!- Name
Window, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
LGstore1_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
0.610,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m}
0.610,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m}
2.740,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m}
2.740,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
LGstore1_Wall_1_Window_2,!- Name
Window, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
LGstore1_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
4.880,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m}
4.880,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m}
7.010,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m}
7.010,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
LGstore1_Wall_1_Window_3,!- Name
Window, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
LGstore1_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
8.230,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m}
8.230,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m}
10.360,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m}
10.360,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
LGstore1_Wall_1_Window_4,!- Name
Window, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
LGstore1_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
12.500,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m}
12.500,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m}
14.630,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m}
14.630,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
LGstore1_Wall_1_Door_1, !- Name
GlassDoor, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
LGstore1_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
2.900,0.0000,2.1300, !- X,Y,Z ==> Vertex 1 {m}
2.900,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
4.730,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
4.730,0.0000,2.1300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
LGstore1_Wall_1_Door_2, !- Name
GlassDoor, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
LGstore1_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
10.520,0.0000,2.1300, !- X,Y,Z ==> Vertex 1 {m}
10.520,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
12.350,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
12.350,0.0000,2.1300; !- X,Y,Z ==> Vertex 4 {m}
InternalMass,
LGstore1_InternalMass_1, !- Name
InteriorFurnishings, !- Construction Name
LGstore1, !- Zone Name
696.7728; !- Surface Area {m2}
!- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION ===========
ZoneInfiltration:DesignFlowRate,
LGstore1_Infiltration, !- Name
LGstore1, !- Zone or ZoneList Name
Type1_Infil_SCH, !- Schedule Name
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
0.000251651008, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
0.0000, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0.2240, !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
ZoneInfiltration:DesignFlowRate,
LGstore1_Door_Infiltration, !- Name
LGstore1, !- Zone or ZoneList Name
INFIL_Door_Opening_SCH, !- Schedule Name
Flow/Zone, !- Design Flow Rate Calculation Method
0.241164917, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
1, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0., !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
People,
LGstore1, !- Name
LGstore1, !- Zone or ZoneList Name
Type1_OCC_SCH, !- Number of People Schedule Name
People, !- Number of People Calculation Method
29.9961, !- Number of People
, !- People per Zone Floor Area {person/m2}
, !- Zone Floor Area per Person {m2/person}
0.3000, !- Fraction Radiant
AUTOCALCULATE, !- Sensible Heat Fraction
ACTIVITY_SCH, !- Activity Level Schedule Name
, !- Carbon Dioxide Generation Rate {m3/s-W}
No, !- Enable ASHRAE 55 Comfort Warnings
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
, !- Surface Name/Angle Factor List Name
WORK_EFF_SCH, !- Work Efficiency Schedule Name
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
, !- Clothing Insulation Calculation Method Schedule Name
CLOTHING_SCH, !- Clothing Insulation Schedule Name
AIR_VELO_SCH, !- Air Velocity Schedule Name
FANGER; !- Thermal Comfort Model 1 Type
!- =========== ALL OBJECTS IN CLASS: LIGHTS ===========
Lights,
LGstore1_Lights, !- Name
LGstore1, !- Zone or ZoneList Name
Type1_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
9.584185835, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
Lights,
LGstore1_Lights_allowance, !- Name
LGstore1, !- Zone or ZoneList Name
Type1_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
5.694108611, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
ElectricEquipment,
LGstore1_MiscPlug_Equip, !- Name
LGstore1, !- Zone or ZoneList Name
TYPE1_EQUIP_SCH, !- Schedule Name
EquipmentLevel, !- Design Level Calculation Method
1498.0615, !- Design Level {W}
, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Fraction Latent
0.5000, !- Fraction Radiant
0.0000, !- Fraction Lost
MiscPlug; !- End-Use Subcategory
Sizing:Zone,
LGstore1, !- Zone or ZoneList Name
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
12.8, !- Zone Cooling Design Supply Air Temperature {C}
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
40.0, !- Zone Heating Design Supply Air Temperature {C}
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
SZ DSOA LGstore1, !- Design Specification Outdoor Air Object Name
, !- Zone Heating Sizing Factor
, !- Zone Cooling Sizing Factor
DesignDay, !- Cooling Design Air Flow Method
0.0, !- Cooling Design Air Flow Rate {m3/s}
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
0.0, !- Cooling Minimum Air Flow {m3/s}
0.0, !- Cooling Minimum Air Flow Fraction
DesignDay, !- Heating Design Air Flow Method
0.0, !- Heating Design Air Flow Rate {m3/s}
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
, !- Heating Maximum Air Flow {m3/s}
; !- Heating Maximum Air Flow Fraction
DesignSpecification:OutdoorAir,
SZ DSOA LGstore1, !- Name
Flow/Area, !- Outdoor Air Method
, !- Outdoor Air Flow per Person {m3/s-person}
0.001181026, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
; !- Outdoor Air Flow per Zone {m3/s}
ZoneControl:Thermostat,
LGstore1 Thermostat, !- Name
LGstore1, !- Zone or ZoneList Name
Dual Zone Control Type Sched, !- Control Type Schedule Name
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
LGstore1 DualSPSched; !- Control 1 Name
ThermostatSetpoint:DualSetpoint,
LGstore1 DualSPSched, !- Name
Type1_HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
Type1_CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
ZoneHVAC:EquipmentConnections,
LGstore1, !- Zone Name
LGstore1 Equipment, !- Zone Conditioning Equipment List Name
LGstore1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
, !- Zone Air Exhaust Node or NodeList Name
LGstore1 Air Node, !- Zone Air Node Name
LGstore1 Return Air Node Name; !- Zone Return Air Node Name
NodeList,
LGstore1 Inlet Nodes, !- Name
LGstore1 Direct Air Inlet Node Name; !- Node 1 Name
ZoneHVAC:EquipmentList,
LGstore1 Equipment, !- Name
SequentialLoad, !- Load Distribution Scheme
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
LGstore1 Direct Air, !- Zone Equipment 1 Name
1, !- Zone Equipment 1 Cooling Sequence
1; !- Zone Equipment 1 Heating or No-Load Sequence
AirTerminal:SingleDuct:Uncontrolled,
LGstore1 Direct Air, !- Name
ALWAYS_ON, !- Availability Schedule Name
LGstore1 Direct Air Inlet Node Name, !- Zone Supply Air Node Name
AUTOSIZE; !- Maximum Air Flow Rate {m3/s}
SetpointManager:SingleZone:Heating,
SupAirTemp MngrLGstore1 - Htg, !- Name
Temperature, !- Control Variable
10.0, !- Minimum Supply Air Temperature
48.88, !- Maximum Supply Air Temperature
LGstore1, !- Control Zone Name
LGstore1 Air Node, !- Zone Node Name
LGstore1 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC_1:1_Unitary_PackageCoolCoil air inlet; !- Setpoint Node or NodeList Name
SetpointManager:SingleZone:Cooling,
SupAirTemp MngrLGstore1 - Clg, !- Name
Temperature, !- Control Variable
10.0, !- Minimum Supply Air Temperature
48.88, !- Maximum Supply Air Temperature
LGstore1, !- Control Zone Name
LGstore1 Air Node, !- Zone Node Name
LGstore1 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC_1:1 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
Zone,
SMstore1, !- Name
0.0000, !- Direction of Relative North {deg}
0.0000, !- X Origin {m}
0.0000, !- Y Origin {m}
0.0000, !- Z Origin {m}
1, !- Type
1.0000, !- Multiplier
-9999.0000, !- Ceiling Height {m}
902.6000, !- Volume {m3}
autocalculate, !- Floor Area {m2}
, !- Zone Inside Convection Algorithm
, !- Zone Outside Convection Algorithm
Yes; !- Part of Total Floor Area
BuildingSurface:Detailed,
SMstore1_Floor, !- Name
Floor, !- Surface Type
SMstore1_Floor_Ffactor, !- Construction Name
SMstore1, !- Zone Name
GroundFCfactorMethod, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
15.2400,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m}
22.8600,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
22.8600,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
15.2400,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore1_Wall_1, !- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
SMstore1, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
15.2400,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m}
15.2400,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
22.8600,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
22.8600,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore1_Wall_1_Window_1,!- Name
Window, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
SMstore1_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
15.850,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m}
15.850,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m}
17.980,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m}
17.980,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore1_Wall_1_Window_2,!- Name
Window, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
SMstore1_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
20.120,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m}
20.120,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m}
22.250,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m}
22.250,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore1_Wall_1_Door, !- Name
GlassDoor, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
SMstore1_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
18.140,0.0000,2.1300, !- X,Y,Z ==> Vertex 1 {m}
18.140,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
19.970,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
19.970,0.0000,2.1300; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore1_Wall_2, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
SMstore1, !- Zone Name
Surface, !- Outside Boundary Condition
LGstore1_Wall_4, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
15.2400,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
15.2400,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
15.2400,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
15.2400,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore1_Roof, !- Name
Roof, !- Surface Type
nonres_roof, !- Construction Name
SMstore1, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
22.8600,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
15.2400,22.8600,5.1800, !- X,Y,Z ==> Vertex 2 {m}
15.2400,0.0000,5.1800, !- X,Y,Z ==> Vertex 3 {m}
22.8600,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore1_Wall_3, !- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
SMstore1, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
22.8600,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
22.8600,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
15.2400,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
15.2400,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore1_Wall_3_Door, !- Name
Door, !- Surface Type
Swinging Door_con, !- Construction Name
SMstore1_Wall_3, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
19.970,22.8600,2.1300, !- X,Y,Z ==> Vertex 1 {m}
19.970,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
18.140,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
18.140,22.8600,2.1300; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore1_Wall_4, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
SMstore1, !- Zone Name
Surface, !- Outside Boundary Condition
SMstore2_Wall_2, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
22.8600,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m}
22.8600,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
22.8600,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
22.8600,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m}
InternalMass,
SMstore1_InternalMass_1, !- Name
InteriorFurnishings, !- Construction Name
SMstore1, !- Zone Name
348.3864; !- Surface Area {m2}
!- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION ===========
ZoneInfiltration:DesignFlowRate,
SMstore1_Infiltration, !- Name
SMstore1, !- Zone or ZoneList Name
Type1_Infil_SCH, !- Schedule Name
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
0.000177458624, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
0.0000, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0.2240, !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
ZoneInfiltration:DesignFlowRate,
SMstore1_Door_Infiltration, !- Name
SMstore1, !- Zone or ZoneList Name
INFIL_Door_Opening_SCH, !- Schedule Name
Flow/Zone, !- Design Flow Rate Calculation Method
0.134504895, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
1, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0., !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
People,
SMstore1, !- Name
SMstore1, !- Zone or ZoneList Name
Type1_OCC_SCH, !- Number of People Schedule Name
People, !- Number of People Calculation Method
14.9980, !- Number of People
, !- People per Zone Floor Area {person/m2}
, !- Zone Floor Area per Person {m2/person}
0.3000, !- Fraction Radiant
AUTOCALCULATE, !- Sensible Heat Fraction
ACTIVITY_SCH, !- Activity Level Schedule Name
, !- Carbon Dioxide Generation Rate {m3/s-W}
No, !- Enable ASHRAE 55 Comfort Warnings
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
, !- Surface Name/Angle Factor List Name
WORK_EFF_SCH, !- Work Efficiency Schedule Name
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
, !- Clothing Insulation Calculation Method Schedule Name
CLOTHING_SCH, !- Clothing Insulation Schedule Name
AIR_VELO_SCH, !- Air Velocity Schedule Name
FANGER; !- Thermal Comfort Model 1 Type
!- =========== ALL OBJECTS IN CLASS: LIGHTS ===========
Lights,
SMstore1_Lights, !- Name
SMstore1, !- Zone or ZoneList Name
Type1_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
9.584185835, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
Lights,
SMstore1_Lights_allowance, !- Name
SMstore1, !- Zone or ZoneList Name
Type1_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
8.568072692, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
ElectricEquipment,
SMstore1_MiscPlug_Equip, !- Name
SMstore1, !- Zone or ZoneList Name
TYPE1_EQUIP_SCH, !- Schedule Name
EquipmentLevel, !- Design Level Calculation Method
749.0308, !- Design Level {W}
, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Fraction Latent
0.5000, !- Fraction Radiant
0.0000, !- Fraction Lost
MiscPlug; !- End-Use Subcategory
Sizing:Zone,
SMstore1, !- Zone or ZoneList Name
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
12.8, !- Zone Cooling Design Supply Air Temperature {C}
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
40.0, !- Zone Heating Design Supply Air Temperature {C}
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
SZ DSOA SMstore1, !- Design Specification Outdoor Air Object Name
, !- Zone Heating Sizing Factor
, !- Zone Cooling Sizing Factor
DesignDay, !- Cooling Design Air Flow Method
0.0, !- Cooling Design Air Flow Rate {m3/s}
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
0.0, !- Cooling Minimum Air Flow {m3/s}
0.0, !- Cooling Minimum Air Flow Fraction
DesignDay, !- Heating Design Air Flow Method
0.0, !- Heating Design Air Flow Rate {m3/s}
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
, !- Heating Maximum Air Flow {m3/s}
; !- Heating Maximum Air Flow Fraction
DesignSpecification:OutdoorAir,
SZ DSOA SMstore1, !- Name
Flow/Area, !- Outdoor Air Method
, !- Outdoor Air Flow per Person {m3/s-person}
0.001181026, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
; !- Outdoor Air Flow per Zone {m3/s}
ZoneControl:Thermostat,
SMstore1 Thermostat, !- Name
SMstore1, !- Zone or ZoneList Name
Dual Zone Control Type Sched, !- Control Type Schedule Name
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
SMstore1 DualSPSched; !- Control 1 Name
ThermostatSetpoint:DualSetpoint,
SMstore1 DualSPSched, !- Name
Type1_HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
Type1_CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
ZoneHVAC:EquipmentConnections,
SMstore1, !- Zone Name
SMstore1 Equipment, !- Zone Conditioning Equipment List Name
SMstore1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
, !- Zone Air Exhaust Node or NodeList Name
SMstore1 Air Node, !- Zone Air Node Name
SMstore1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
NodeList,
SMstore1 Inlet Nodes, !- Name
SMstore1 Direct Air Inlet Node Name; !- Node 1 Name
ZoneHVAC:EquipmentList,
SMstore1 Equipment, !- Name
SequentialLoad, !- Load Distribution Scheme
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
SMstore1 Direct Air, !- Zone Equipment 1 Name
1, !- Zone Equipment 1 Cooling Sequence
1; !- Zone Equipment 1 Heating or No-Load Sequence
AirTerminal:SingleDuct:Uncontrolled,
SMstore1 Direct Air, !- Name
ALWAYS_ON, !- Availability Schedule Name
SMstore1 Direct Air Inlet Node Name, !- Zone Supply Air Node Name
AUTOSIZE; !- Maximum Air Flow Rate {m3/s}
SetpointManager:SingleZone:Heating,
SupAirTemp MngrSMstore1 - Htg, !- Name
Temperature, !- Control Variable
10.0, !- Minimum Supply Air Temperature
48.89, !- Maximum Supply Air Temperature
SMstore1, !- Control Zone Name
SMstore1 Air Node, !- Zone Node Name
SMstore1 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC_2:2_Unitary_PackageCoolCoil air inlet; !- Setpoint Node or NodeList Name
SetpointManager:SingleZone:Cooling,
SupAirTemp MngrSMstore1 - Clg, !- Name
Temperature, !- Control Variable
10.0, !- Minimum Supply Air Temperature
48.89, !- Maximum Supply Air Temperature
SMstore1, !- Control Zone Name
SMstore1 Air Node, !- Zone Node Name
SMstore1 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC_2:2 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
Zone,
SMstore2, !- Name
0.0000, !- Direction of Relative North {deg}
0.0000, !- X Origin {m}
0.0000, !- Y Origin {m}
0.0000, !- Z Origin {m}
1, !- Type
1.0000, !- Multiplier
-9999.0000, !- Ceiling Height {m}
902.6000, !- Volume {m3}
autocalculate, !- Floor Area {m2}
, !- Zone Inside Convection Algorithm
, !- Zone Outside Convection Algorithm
Yes; !- Part of Total Floor Area
BuildingSurface:Detailed,
SMstore2_Floor, !- Name
Floor, !- Surface Type
SMstore2_Floor_Ffactor, !- Construction Name
SMstore2, !- Zone Name
GroundFCfactorMethod, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
22.8600,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m}
30.4800,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
30.4800,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
22.8600,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore2_Wall_1, !- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
SMstore2, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
22.8600,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m}
22.8600,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
30.4800,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
30.4800,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore2_Wall_1_Window_1,!- Name
Window, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
SMstore2_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
23.470,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m}
23.470,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m}
25.600,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m}
25.600,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore2_Wall_1_Window_2,!- Name
Window, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
SMstore2_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
27.740,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m}
27.740,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m}
29.870,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m}
29.870,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore2_Wall_1_Door, !- Name
GlassDoor, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
SMstore2_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
25.760,0.0000,2.1300, !- X,Y,Z ==> Vertex 1 {m}
25.760,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
27.580,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
27.580,0.0000,2.1300; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore2_Wall_2, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
SMstore2, !- Zone Name
Surface, !- Outside Boundary Condition
SMstore1_Wall_4, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
22.8600,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
22.8600,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
22.8600,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
22.8600,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore2_Roof, !- Name
Roof, !- Surface Type
nonres_roof, !- Construction Name
SMstore2, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
30.4800,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
22.8600,22.8600,5.1800, !- X,Y,Z ==> Vertex 2 {m}
22.8600,0.0000,5.1800, !- X,Y,Z ==> Vertex 3 {m}
30.4800,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore2_Wall_3, !- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
SMstore2, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
30.4800,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
30.4800,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
22.8600,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
22.8600,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore2_Wall_3_Door, !- Name
Door, !- Surface Type
Swinging Door_con, !- Construction Name
SMstore2_Wall_3, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
27.580,22.8600,2.1300, !- X,Y,Z ==> Vertex 1 {m}
27.580,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
25.760,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
25.760,22.8600,2.1300; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore2_Wall_4, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
SMstore2, !- Zone Name
Surface, !- Outside Boundary Condition
SMstore3_Wall_2, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
30.4800,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m}
30.4800,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
30.4800,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
30.4800,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m}
InternalMass,
SMstore2_InternalMass_1, !- Name
InteriorFurnishings, !- Construction Name
SMstore2, !- Zone Name
348.3864; !- Surface Area {m2}
!- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION ===========
ZoneInfiltration:DesignFlowRate,
SMstore2_Infiltration, !- Name
SMstore2, !- Zone or ZoneList Name
Type2_Infil_SCH, !- Schedule Name
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
0.000177458624, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
0.0000, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0.2240, !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
ZoneInfiltration:DesignFlowRate,
SMstore2_Door_Infiltration, !- Name
SMstore2, !- Zone or ZoneList Name
INFIL_Door_Opening_SCH, !- Schedule Name
Flow/Zone, !- Design Flow Rate Calculation Method
0.134504895, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
1, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0., !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
People,
SMstore2, !- Name
SMstore2, !- Zone or ZoneList Name
Type2_OCC_SCH, !- Number of People Schedule Name
People, !- Number of People Calculation Method
14.9980, !- Number of People
, !- People per Zone Floor Area {person/m2}
, !- Zone Floor Area per Person {m2/person}
0.3000, !- Fraction Radiant
AUTOCALCULATE, !- Sensible Heat Fraction
ACTIVITY_SCH, !- Activity Level Schedule Name
, !- Carbon Dioxide Generation Rate {m3/s-W}
No, !- Enable ASHRAE 55 Comfort Warnings
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
, !- Surface Name/Angle Factor List Name
WORK_EFF_SCH, !- Work Efficiency Schedule Name
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
, !- Clothing Insulation Calculation Method Schedule Name
CLOTHING_SCH, !- Clothing Insulation Schedule Name
AIR_VELO_SCH, !- Air Velocity Schedule Name
FANGER; !- Thermal Comfort Model 1 Type
!- =========== ALL OBJECTS IN CLASS: LIGHTS ===========
Lights,
SMstore2_Lights, !- Name
SMstore2, !- Zone or ZoneList Name
Type2_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
9.584185835, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
Lights,
SMstore2_Lights_allowance, !- Name
SMstore2, !- Zone or ZoneList Name
Type2_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
6.953486129, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
ElectricEquipment,
SMstore2_MiscPlug_Equip, !- Name
SMstore2, !- Zone or ZoneList Name
TYPE2_EQUIP_SCH, !- Schedule Name
EquipmentLevel, !- Design Level Calculation Method
749.0308, !- Design Level {W}
, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Fraction Latent
0.5000, !- Fraction Radiant
0.0000, !- Fraction Lost
MiscPlug; !- End-Use Subcategory
Sizing:Zone,
SMstore2, !- Zone or ZoneList Name
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
12.8, !- Zone Cooling Design Supply Air Temperature {C}
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
40.0, !- Zone Heating Design Supply Air Temperature {C}
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
SZ DSOA SMstore2, !- Design Specification Outdoor Air Object Name
, !- Zone Heating Sizing Factor
, !- Zone Cooling Sizing Factor
DesignDay, !- Cooling Design Air Flow Method
0.0, !- Cooling Design Air Flow Rate {m3/s}
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
0.0, !- Cooling Minimum Air Flow {m3/s}
0.0, !- Cooling Minimum Air Flow Fraction
DesignDay, !- Heating Design Air Flow Method
0.0, !- Heating Design Air Flow Rate {m3/s}
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
, !- Heating Maximum Air Flow {m3/s}
; !- Heating Maximum Air Flow Fraction
DesignSpecification:OutdoorAir,
SZ DSOA SMstore2, !- Name
Flow/Area, !- Outdoor Air Method
, !- Outdoor Air Flow per Person {m3/s-person}
0.001181026, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
; !- Outdoor Air Flow per Zone {m3/s}
ZoneControl:Thermostat,
SMstore2 Thermostat, !- Name
SMstore2, !- Zone or ZoneList Name
Dual Zone Control Type Sched, !- Control Type Schedule Name
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
SMstore2 DualSPSched; !- Control 1 Name
ThermostatSetpoint:DualSetpoint,
SMstore2 DualSPSched, !- Name
Type2_HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
Type2_CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
ZoneHVAC:EquipmentConnections,
SMstore2, !- Zone Name
SMstore2 Equipment, !- Zone Conditioning Equipment List Name
SMstore2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
, !- Zone Air Exhaust Node or NodeList Name
SMstore2 Air Node, !- Zone Air Node Name
SMstore2 Return Air Node Name; !- Zone Return Air Node or NodeList Name
NodeList,
SMstore2 Inlet Nodes, !- Name
SMstore2 Direct Air Inlet Node Name; !- Node 1 Name
ZoneHVAC:EquipmentList,
SMstore2 Equipment, !- Name
SequentialLoad, !- Load Distribution Scheme
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
SMstore2 Direct Air, !- Zone Equipment 1 Name
1, !- Zone Equipment 1 Cooling Sequence
1; !- Zone Equipment 1 Heating or No-Load Sequence
AirTerminal:SingleDuct:Uncontrolled,
SMstore2 Direct Air, !- Name
ALWAYS_ON, !- Availability Schedule Name
SMstore2 Direct Air Inlet Node Name, !- Zone Supply Air Node Name
AUTOSIZE; !- Maximum Air Flow Rate {m3/s}
SetpointManager:SingleZone:Heating,
SupAirTemp MngrSMstore2 - Htg, !- Name
Temperature, !- Control Variable
10.0, !- Minimum Supply Air Temperature
48.89, !- Maximum Supply Air Temperature
SMstore2, !- Control Zone Name
SMstore2 Air Node, !- Zone Node Name
SMstore2 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC_3:3_Unitary_PackageCoolCoil air inlet; !- Setpoint Node or NodeList Name
SetpointManager:SingleZone:Cooling,
SupAirTemp MngrSMstore2 - Clg, !- Name
Temperature, !- Control Variable
10.0, !- Minimum Supply Air Temperature
48.89, !- Maximum Supply Air Temperature
SMstore2, !- Control Zone Name
SMstore2 Air Node, !- Zone Node Name
SMstore2 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC_3:3 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
Zone,
SMstore3, !- Name
0.0000, !- Direction of Relative North {deg}
0.0000, !- X Origin {m}
0.0000, !- Y Origin {m}
0.0000, !- Z Origin {m}
1, !- Type
1.0000, !- Multiplier
-9999.0000, !- Ceiling Height {m}
902.6000, !- Volume {m3}
autocalculate, !- Floor Area {m2}
, !- Zone Inside Convection Algorithm
, !- Zone Outside Convection Algorithm
Yes; !- Part of Total Floor Area
BuildingSurface:Detailed,
SMstore3_Floor, !- Name
Floor, !- Surface Type
SMstore3_Floor_Ffactor, !- Construction Name
SMstore3, !- Zone Name
GroundFCfactorMethod, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
30.4800,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m}
38.1000,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
38.1000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
30.4800,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore3_Wall_1, !- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
SMstore3, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
30.4800,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m}
30.4800,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
38.1000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
38.1000,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore3_Wall_1_Window_1,!- Name
Window, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
SMstore3_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
31.090,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m}
31.090,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m}
33.220,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m}
33.220,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore3_Wall_1_Window_2,!- Name
Window, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
SMstore3_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
35.360,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m}
35.360,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m}
37.490,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m}
37.490,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore3_Wall_1_Door, !- Name
GlassDoor, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
SMstore3_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
33.380,0.0000,2.1300, !- X,Y,Z ==> Vertex 1 {m}
33.380,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
35.200,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
35.200,0.0000,2.1300; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore3_Wall_2, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
SMstore3, !- Zone Name
Surface, !- Outside Boundary Condition
SMstore2_Wall_4, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
30.4800,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
30.4800,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
30.4800,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
30.4800,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore3_Roof, !- Name
Roof, !- Surface Type
nonres_roof, !- Construction Name
SMstore3, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
38.1000,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
30.4800,22.8600,5.1800, !- X,Y,Z ==> Vertex 2 {m}
30.4800,0.0000,5.1800, !- X,Y,Z ==> Vertex 3 {m}
38.1000,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore3_Wall_3, !- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
SMstore3, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
38.1000,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
38.1000,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
30.4800,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
30.4800,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore3_Wall_3_Door, !- Name
Door, !- Surface Type
Swinging Door_con, !- Construction Name
SMstore3_Wall_3, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
35.200,22.8600,2.1300, !- X,Y,Z ==> Vertex 1 {m}
35.200,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
33.380,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
33.380,22.8600,2.1300; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore3_Wall_4, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
SMstore3, !- Zone Name
Surface, !- Outside Boundary Condition
SMstore4_Wall_2, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
38.1000,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m}
38.1000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
38.1000,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
38.1000,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m}
InternalMass,
SMstore3_InternalMass_1, !- Name
InteriorFurnishings, !- Construction Name
SMstore3, !- Zone Name
348.3864; !- Surface Area {m2}
!- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION ===========
ZoneInfiltration:DesignFlowRate,
SMstore3_Infiltration, !- Name
SMstore3, !- Zone or ZoneList Name
Type2_Infil_SCH, !- Schedule Name
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
0.000177458624, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
0.0000, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0.2240, !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
ZoneInfiltration:DesignFlowRate,
SMstore3_Door_Infiltration, !- Name
SMstore3, !- Zone or ZoneList Name
INFIL_Door_Opening_SCH, !- Schedule Name
Flow/Zone, !- Design Flow Rate Calculation Method
0.134504895, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
1, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0., !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
People,
SMstore3, !- Name
SMstore3, !- Zone or ZoneList Name
Type2_OCC_SCH, !- Number of People Schedule Name
People, !- Number of People Calculation Method
14.9980, !- Number of People
, !- People per Zone Floor Area {person/m2}
, !- Zone Floor Area per Person {m2/person}
0.3000, !- Fraction Radiant
AUTOCALCULATE, !- Sensible Heat Fraction
ACTIVITY_SCH, !- Activity Level Schedule Name
, !- Carbon Dioxide Generation Rate {m3/s-W}
No, !- Enable ASHRAE 55 Comfort Warnings
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
, !- Surface Name/Angle Factor List Name
WORK_EFF_SCH, !- Work Efficiency Schedule Name
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
, !- Clothing Insulation Calculation Method Schedule Name
CLOTHING_SCH, !- Clothing Insulation Schedule Name
AIR_VELO_SCH, !- Air Velocity Schedule Name
FANGER; !- Thermal Comfort Model 1 Type
!- =========== ALL OBJECTS IN CLASS: LIGHTS ===========
Lights,
SMstore3_Lights, !- Name
SMstore3, !- Zone or ZoneList Name
Type2_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
9.584185835, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
Lights,
SMstore3_Lights_allowance, !- Name
SMstore3, !- Zone or ZoneList Name
Type2_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
6.953486129, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
ElectricEquipment,
SMstore3_MiscPlug_Equip, !- Name
SMstore3, !- Zone or ZoneList Name
TYPE2_EQUIP_SCH, !- Schedule Name
EquipmentLevel, !- Design Level Calculation Method
749.0308, !- Design Level {W}
, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Fraction Latent
0.5000, !- Fraction Radiant
0.0000, !- Fraction Lost
MiscPlug; !- End-Use Subcategory
Sizing:Zone,
SMstore3, !- Zone or ZoneList Name
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
12.8, !- Zone Cooling Design Supply Air Temperature {C}
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
40.0, !- Zone Heating Design Supply Air Temperature {C}
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
SZ DSOA SMstore3, !- Design Specification Outdoor Air Object Name
, !- Zone Heating Sizing Factor
, !- Zone Cooling Sizing Factor
DesignDay, !- Cooling Design Air Flow Method
0.0, !- Cooling Design Air Flow Rate {m3/s}
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
0.0, !- Cooling Minimum Air Flow {m3/s}
0.0, !- Cooling Minimum Air Flow Fraction
DesignDay, !- Heating Design Air Flow Method
0.0, !- Heating Design Air Flow Rate {m3/s}
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
, !- Heating Maximum Air Flow {m3/s}
; !- Heating Maximum Air Flow Fraction
DesignSpecification:OutdoorAir,
SZ DSOA SMstore3, !- Name
Flow/Area, !- Outdoor Air Method
, !- Outdoor Air Flow per Person {m3/s-person}
0.001181026, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
; !- Outdoor Air Flow per Zone {m3/s}
ZoneControl:Thermostat,
SMstore3 Thermostat, !- Name
SMstore3, !- Zone or ZoneList Name
Dual Zone Control Type Sched, !- Control Type Schedule Name
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
SMstore3 DualSPSched; !- Control 1 Name
ThermostatSetpoint:DualSetpoint,
SMstore3 DualSPSched, !- Name
Type2_HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
Type2_CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
ZoneHVAC:EquipmentConnections,
SMstore3, !- Zone Name
SMstore3 Equipment, !- Zone Conditioning Equipment List Name
SMstore3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
, !- Zone Air Exhaust Node or NodeList Name
SMstore3 Air Node, !- Zone Air Node Name
SMstore3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
NodeList,
SMstore3 Inlet Nodes, !- Name
SMstore3 Direct Air Inlet Node Name; !- Node 1 Name
ZoneHVAC:EquipmentList,
SMstore3 Equipment, !- Name
SequentialLoad, !- Load Distribution Scheme
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
SMstore3 Direct Air, !- Zone Equipment 1 Name
1, !- Zone Equipment 1 Cooling Sequence
1; !- Zone Equipment 1 Heating or No-Load Sequence
AirTerminal:SingleDuct:Uncontrolled,
SMstore3 Direct Air, !- Name
ALWAYS_ON, !- Availability Schedule Name
SMstore3 Direct Air Inlet Node Name, !- Zone Supply Air Node Name
AUTOSIZE; !- Maximum Air Flow Rate {m3/s}
SetpointManager:SingleZone:Heating,
SupAirTemp MngrSMstore3 - Htg, !- Name
Temperature, !- Control Variable
10.0, !- Minimum Supply Air Temperature
48.89, !- Maximum Supply Air Temperature
SMstore3, !- Control Zone Name
SMstore3 Air Node, !- Zone Node Name
SMstore3 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC_4:4_Unitary_PackageCoolCoil air inlet; !- Setpoint Node or NodeList Name
SetpointManager:SingleZone:Cooling,
SupAirTemp MngrSMstore3 - Clg, !- Name
Temperature, !- Control Variable
10.0, !- Minimum Supply Air Temperature
48.89, !- Maximum Supply Air Temperature
SMstore3, !- Control Zone Name
SMstore3 Air Node, !- Zone Node Name
SMstore3 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC_4:4 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
Zone,
SMstore4, !- Name
0.0000, !- Direction of Relative North {deg}
0.0000, !- X Origin {m}
0.0000, !- Y Origin {m}
0.0000, !- Z Origin {m}
1, !- Type
1.0000, !- Multiplier
-9999.0000, !- Ceiling Height {m}
902.6000, !- Volume {m3}
autocalculate, !- Floor Area {m2}
, !- Zone Inside Convection Algorithm
, !- Zone Outside Convection Algorithm
Yes; !- Part of Total Floor Area
BuildingSurface:Detailed,
SMstore4_Floor, !- Name
Floor, !- Surface Type
SMstore4_Floor_Ffactor, !- Construction Name
SMstore4, !- Zone Name
GroundFCfactorMethod, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
38.1000,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m}
45.7200,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
45.7200,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
38.1000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore4_Wall_1, !- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
SMstore4, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
38.1000,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m}
38.1000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
45.7200,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
45.7200,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore4_Wall_1_Window_1,!- Name
Window, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
SMstore4_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
38.710,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m}
38.710,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m}
40.840,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m}
40.840,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore4_Wall_1_Window_2,!- Name
Window, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
SMstore4_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
42.980,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m}
42.980,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m}
45.110,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m}
45.110,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore4_Wall_1_Door, !- Name
GlassDoor, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
SMstore4_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
41.000,0.0000,2.1300, !- X,Y,Z ==> Vertex 1 {m}
41.000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
42.820,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
42.820,0.0000,2.1300; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore4_Wall_2, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
SMstore4, !- Zone Name
Surface, !- Outside Boundary Condition
SMstore3_Wall_4, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
38.1000,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
38.1000,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
38.1000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
38.1000,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore4_Roof, !- Name
Roof, !- Surface Type
nonres_roof, !- Construction Name
SMstore4, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
45.7200,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
38.1000,22.8600,5.1800, !- X,Y,Z ==> Vertex 2 {m}
38.1000,0.0000,5.1800, !- X,Y,Z ==> Vertex 3 {m}
45.7200,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore4_Wall_3, !- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
SMstore4, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
45.7200,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
45.7200,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
38.1000,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
38.1000,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore4_Wall_3_Door, !- Name
Door, !- Surface Type
Swinging Door_con, !- Construction Name
SMstore4_Wall_3, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
42.820,22.8600,2.1300, !- X,Y,Z ==> Vertex 1 {m}
42.820,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
41.000,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
41.000,22.8600,2.1300; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore4_Wall_4, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
SMstore4, !- Zone Name
Surface, !- Outside Boundary Condition
LGstore2_Wall_2, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
45.7200,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m}
45.7200,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
45.7200,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
45.7200,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m}
InternalMass,
SMstore4_InternalMass_1, !- Name
InteriorFurnishings, !- Construction Name
SMstore4, !- Zone Name
348.3864; !- Surface Area {m2}
!- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION ===========
ZoneInfiltration:DesignFlowRate,
SMstore4_Infiltration, !- Name
SMstore4, !- Zone or ZoneList Name
Type2_Infil_SCH, !- Schedule Name
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
0.000177458624, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
0.0000, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0.2240, !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
ZoneInfiltration:DesignFlowRate,
SMstore4_Door_Infiltration, !- Name
SMstore4, !- Zone or ZoneList Name
INFIL_Door_Opening_SCH, !- Schedule Name
Flow/Zone, !- Design Flow Rate Calculation Method
0.134504895, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
1, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0., !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
People,
SMstore4, !- Name
SMstore4, !- Zone or ZoneList Name
Type2_OCC_SCH, !- Number of People Schedule Name
People, !- Number of People Calculation Method
14.9980, !- Number of People
, !- People per Zone Floor Area {person/m2}
, !- Zone Floor Area per Person {m2/person}
0.3000, !- Fraction Radiant
AUTOCALCULATE, !- Sensible Heat Fraction
ACTIVITY_SCH, !- Activity Level Schedule Name
, !- Carbon Dioxide Generation Rate {m3/s-W}
No, !- Enable ASHRAE 55 Comfort Warnings
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
, !- Surface Name/Angle Factor List Name
WORK_EFF_SCH, !- Work Efficiency Schedule Name
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
, !- Clothing Insulation Calculation Method Schedule Name
CLOTHING_SCH, !- Clothing Insulation Schedule Name
AIR_VELO_SCH, !- Air Velocity Schedule Name
FANGER; !- Thermal Comfort Model 1 Type
!- =========== ALL OBJECTS IN CLASS: LIGHTS ===========
Lights,
SMstore4_Lights, !- Name
SMstore4, !- Zone or ZoneList Name
Type2_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
9.584185835, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
Lights,
SMstore4_Lights_allowance, !- Name
SMstore4, !- Zone or ZoneList Name
Type2_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
6.953486129, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
ElectricEquipment,
SMstore4_MiscPlug_Equip, !- Name
SMstore4, !- Zone or ZoneList Name
TYPE2_EQUIP_SCH, !- Schedule Name
EquipmentLevel, !- Design Level Calculation Method
749.0308, !- Design Level {W}
, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Fraction Latent
0.5000, !- Fraction Radiant
0.0000, !- Fraction Lost
MiscPlug; !- End-Use Subcategory
Sizing:Zone,
SMstore4, !- Zone or ZoneList Name
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
12.8, !- Zone Cooling Design Supply Air Temperature {C}
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
40.0, !- Zone Heating Design Supply Air Temperature {C}
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
SZ DSOA SMstore4, !- Design Specification Outdoor Air Object Name
, !- Zone Heating Sizing Factor
, !- Zone Cooling Sizing Factor
DesignDay, !- Cooling Design Air Flow Method
0.0, !- Cooling Design Air Flow Rate {m3/s}
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
0.0, !- Cooling Minimum Air Flow {m3/s}
0.0, !- Cooling Minimum Air Flow Fraction
DesignDay, !- Heating Design Air Flow Method
0.0, !- Heating Design Air Flow Rate {m3/s}
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
, !- Heating Maximum Air Flow {m3/s}
; !- Heating Maximum Air Flow Fraction
DesignSpecification:OutdoorAir,
SZ DSOA SMstore4, !- Name
Flow/Area, !- Outdoor Air Method
, !- Outdoor Air Flow per Person {m3/s-person}
0.001181026, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
; !- Outdoor Air Flow per Zone {m3/s}
ZoneControl:Thermostat,
SMstore4 Thermostat, !- Name
SMstore4, !- Zone or ZoneList Name
Dual Zone Control Type Sched, !- Control Type Schedule Name
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
SMstore4 DualSPSched; !- Control 1 Name
ThermostatSetpoint:DualSetpoint,
SMstore4 DualSPSched, !- Name
Type2_HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
Type2_CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
ZoneHVAC:EquipmentConnections,
SMstore4, !- Zone Name
SMstore4 Equipment, !- Zone Conditioning Equipment List Name
SMstore4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
, !- Zone Air Exhaust Node or NodeList Name
SMstore4 Air Node, !- Zone Air Node Name
SMstore4 Return Air Node Name; !- Zone Return Air Node or NodeList Name
NodeList,
SMstore4 Inlet Nodes, !- Name
SMstore4 Direct Air Inlet Node Name; !- Node 1 Name
ZoneHVAC:EquipmentList,
SMstore4 Equipment, !- Name
SequentialLoad, !- Load Distribution Scheme
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
SMstore4 Direct Air, !- Zone Equipment 1 Name
1, !- Zone Equipment 1 Cooling Sequence
1; !- Zone Equipment 1 Heating or No-Load Sequence
AirTerminal:SingleDuct:Uncontrolled,
SMstore4 Direct Air, !- Name
ALWAYS_ON, !- Availability Schedule Name
SMstore4 Direct Air Inlet Node Name, !- Zone Supply Air Node Name
AUTOSIZE; !- Maximum Air Flow Rate {m3/s}
SetpointManager:SingleZone:Heating,
SupAirTemp MngrSMstore4 - Htg, !- Name
Temperature, !- Control Variable
10.0, !- Minimum Supply Air Temperature
48.89, !- Maximum Supply Air Temperature
SMstore4, !- Control Zone Name
SMstore4 Air Node, !- Zone Node Name
SMstore4 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC_5:5_Unitary_PackageCoolCoil air inlet; !- Setpoint Node or NodeList Name
SetpointManager:SingleZone:Cooling,
SupAirTemp MngrSMstore4 - Clg, !- Name
Temperature, !- Control Variable
10.0, !- Minimum Supply Air Temperature
48.89, !- Maximum Supply Air Temperature
SMstore4, !- Control Zone Name
SMstore4 Air Node, !- Zone Node Name
SMstore4 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC_5:5 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
Zone,
LGstore2, !- Name
0.0000, !- Direction of Relative North {deg}
0.0000, !- X Origin {m}
0.0000, !- Y Origin {m}
0.0000, !- Z Origin {m}
1, !- Type
1.0000, !- Multiplier
-9999.0000, !- Ceiling Height {m}
1805.2000, !- Volume {m3}
autocalculate, !- Floor Area {m2}
, !- Zone Inside Convection Algorithm
, !- Zone Outside Convection Algorithm
Yes; !- Part of Total Floor Area
BuildingSurface:Detailed,
LGstore2_Floor, !- Name
Floor, !- Surface Type
LGstore2_Floor_Ffactor, !- Construction Name
LGstore2, !- Zone Name
GroundFCfactorMethod, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
45.7200,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m}
60.9600,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
60.9600,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
45.7200,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
LGstore2_Wall_2, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
LGstore2, !- Zone Name
Surface, !- Outside Boundary Condition
SMstore4_Wall_4, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
45.7200,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
45.7200,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
45.7200,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
45.7200,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
LGstore2_Roof, !- Name
Roof, !- Surface Type
nonres_roof, !- Construction Name
LGstore2, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
60.9600,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
45.7200,22.8600,5.1800, !- X,Y,Z ==> Vertex 2 {m}
45.7200,0.0000,5.1800, !- X,Y,Z ==> Vertex 3 {m}
60.9600,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
LGstore2_Wall_3, !- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
LGstore2, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
60.9600,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
60.9600,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
45.7200,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
45.7200,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
LGstore2_Wall_3_Door_1, !- Name
Door, !- Surface Type
Swinging Door_con, !- Construction Name
LGstore2_Wall_3, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
50.440,22.8600,2.1300, !- X,Y,Z ==> Vertex 1 {m}
50.440,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
48.620,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
48.620,22.8600,2.1300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
LGstore2_Wall_3_Door_2, !- Name
Door, !- Surface Type
Swinging Door_con, !- Construction Name
LGstore2_Wall_3, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
58.060,22.8600,2.1300, !- X,Y,Z ==> Vertex 1 {m}
58.060,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
56.240,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
56.240,22.8600,2.1300; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
LGstore2_Wall_4, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
LGstore2, !- Zone Name
Surface, !- Outside Boundary Condition
SMstore5_Wall_2, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
60.9600,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m}
60.9600,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
60.9600,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
60.9600,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
LGstore2_Wall_1, !- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
LGstore2, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
45.7200,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m}
45.7200,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
60.9600,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
60.9600,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
LGstore2_Wall_1_Window_1,!- Name
Window, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
LGstore2_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
46.330,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m}
46.330,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m}
48.460,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m}
48.460,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
LGstore2_Wall_1_Window_2,!- Name
Window, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
LGstore2_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
50.600,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m}
50.600,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m}
52.730,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m}
52.730,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
LGstore2_Wall_1_Window_3,!- Name
Window, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
LGstore2_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
53.950,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m}
53.950,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m}
56.080,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m}
56.080,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
LGstore2_Wall_1_Window_4,!- Name
Window, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
LGstore2_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
58.220,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m}
58.220,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m}
60.350,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m}
60.350,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
LGstore2_Wall_1_Door_1, !- Name
GlassDoor, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
LGstore2_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
48.620,0.0000,2.1300, !- X,Y,Z ==> Vertex 1 {m}
48.620,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
50.440,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
50.440,0.0000,2.1300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
LGstore2_Wall_1_Door_2, !- Name
GlassDoor, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
LGstore2_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
56.240,0.0000,2.1300, !- X,Y,Z ==> Vertex 1 {m}
56.240,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
58.060,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
58.060,0.0000,2.1300; !- X,Y,Z ==> Vertex 4 {m}
InternalMass,
LGstore2_InternalMass_1, !- Name
InteriorFurnishings, !- Construction Name
LGstore2, !- Zone Name
696.7728; !- Surface Area {m2}
!- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION ===========
ZoneInfiltration:DesignFlowRate,
LGstore2_Infiltration, !- Name
LGstore2, !- Zone or ZoneList Name
Type3_Infil_SCH, !- Schedule Name
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
0.000177458624, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
0.0000, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0.2240, !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
ZoneInfiltration:DesignFlowRate,
LGstore2_Door_Infiltration, !- Name
LGstore2, !- Zone or ZoneList Name
INFIL_Door_Opening_SCH, !- Schedule Name
Flow/Zone, !- Design Flow Rate Calculation Method
0.241164917, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
1, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0., !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
People,
LGstore2, !- Name
LGstore2, !- Zone or ZoneList Name
Type3_OCC_SCH, !- Number of People Schedule Name
People, !- Number of People Calculation Method
29.9961, !- Number of People
, !- People per Zone Floor Area {person/m2}
, !- Zone Floor Area per Person {m2/person}
0.3000, !- Fraction Radiant
AUTOCALCULATE, !- Sensible Heat Fraction
ACTIVITY_SCH, !- Activity Level Schedule Name
, !- Carbon Dioxide Generation Rate {m3/s-W}
No, !- Enable ASHRAE 55 Comfort Warnings
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
, !- Surface Name/Angle Factor List Name
WORK_EFF_SCH, !- Work Efficiency Schedule Name
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
, !- Clothing Insulation Calculation Method Schedule Name
CLOTHING_SCH, !- Clothing Insulation Schedule Name
AIR_VELO_SCH, !- Air Velocity Schedule Name
FANGER; !- Thermal Comfort Model 1 Type
!- =========== ALL OBJECTS IN CLASS: LIGHTS ===========
Lights,
LGstore2_Lights, !- Name
LGstore2, !- Zone or ZoneList Name
Type3_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
9.584185835, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
Lights,
LGstore2_Lights_allowance, !- Name
LGstore2, !- Zone or ZoneList Name
Type3_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
ElectricEquipment,
LGstore2_MiscPlug_Equip, !- Name
LGstore2, !- Zone or ZoneList Name
TYPE3_EQUIP_SCH, !- Schedule Name
EquipmentLevel, !- Design Level Calculation Method
1498.0615, !- Design Level {W}
, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Fraction Latent
0.5000, !- Fraction Radiant
0.0000, !- Fraction Lost
MiscPlug; !- End-Use Subcategory
Sizing:Zone,
LGstore2, !- Zone or ZoneList Name
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
12.8, !- Zone Cooling Design Supply Air Temperature {C}
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
40.0, !- Zone Heating Design Supply Air Temperature {C}
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
SZ DSOA LGstore2, !- Design Specification Outdoor Air Object Name
, !- Zone Heating Sizing Factor
, !- Zone Cooling Sizing Factor
DesignDay, !- Cooling Design Air Flow Method
0.0, !- Cooling Design Air Flow Rate {m3/s}
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
0.0, !- Cooling Minimum Air Flow {m3/s}
0.0, !- Cooling Minimum Air Flow Fraction
DesignDay, !- Heating Design Air Flow Method
0.0, !- Heating Design Air Flow Rate {m3/s}
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
, !- Heating Maximum Air Flow {m3/s}
; !- Heating Maximum Air Flow Fraction
DesignSpecification:OutdoorAir,
SZ DSOA LGstore2, !- Name
Flow/Area, !- Outdoor Air Method
, !- Outdoor Air Flow per Person {m3/s-person}
0.001181026, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
; !- Outdoor Air Flow per Zone {m3/s}
ZoneControl:Thermostat,
LGstore2 Thermostat, !- Name
LGstore2, !- Zone or ZoneList Name
Dual Zone Control Type Sched, !- Control Type Schedule Name
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
LGstore2 DualSPSched; !- Control 1 Name
ThermostatSetpoint:DualSetpoint,
LGstore2 DualSPSched, !- Name
Type3_HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
Type3_CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
ZoneHVAC:EquipmentConnections,
LGstore2, !- Zone Name
LGstore2 Equipment, !- Zone Conditioning Equipment List Name
LGstore2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
, !- Zone Air Exhaust Node or NodeList Name
LGstore2 Air Node, !- Zone Air Node Name
LGstore2 Return Air Node Name; !- Zone Return Air Node or NodeList Name
NodeList,
LGstore2 Inlet Nodes, !- Name
LGstore2 Direct Air Inlet Node Name; !- Node 1 Name
ZoneHVAC:EquipmentList,
LGstore2 Equipment, !- Name
SequentialLoad, !- Load Distribution Scheme
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
LGstore2 Direct Air, !- Zone Equipment 1 Name
1, !- Zone Equipment 1 Cooling Sequence
1; !- Zone Equipment 1 Heating or No-Load Sequence
AirTerminal:SingleDuct:Uncontrolled,
LGstore2 Direct Air, !- Name
ALWAYS_ON, !- Availability Schedule Name
LGstore2 Direct Air Inlet Node Name, !- Zone Supply Air Node Name
AUTOSIZE; !- Maximum Air Flow Rate {m3/s}
SetpointManager:SingleZone:Heating,
SupAirTemp MngrLGstore2 - Htg, !- Name
Temperature, !- Control Variable
10.0, !- Minimum Supply Air Temperature
48.89, !- Maximum Supply Air Temperature
LGstore2, !- Control Zone Name
LGstore2 Air Node, !- Zone Node Name
LGstore2 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC_6:6_Unitary_PackageCoolCoil air inlet; !- Setpoint Node or NodeList Name
SetpointManager:SingleZone:Cooling,
SupAirTemp MngrLGstore2 - Clg, !- Name
Temperature, !- Control Variable
10.0, !- Minimum Supply Air Temperature
48.89, !- Maximum Supply Air Temperature
LGstore2, !- Control Zone Name
LGstore2 Air Node, !- Zone Node Name
LGstore2 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC_6:6 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
Zone,
SMstore5, !- Name
0.0000, !- Direction of Relative North {deg}
0.0000, !- X Origin {m}
0.0000, !- Y Origin {m}
0.0000, !- Z Origin {m}
1, !- Type
1.0000, !- Multiplier
-9999.0000, !- Ceiling Height {m}
902.6000, !- Volume {m3}
autocalculate, !- Floor Area {m2}
, !- Zone Inside Convection Algorithm
, !- Zone Outside Convection Algorithm
Yes; !- Part of Total Floor Area
BuildingSurface:Detailed,
SMstore5_Floor, !- Name
Floor, !- Surface Type
SMstore5_Floor_Ffactor, !- Construction Name
SMstore5, !- Zone Name
GroundFCfactorMethod, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
60.9600,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m}
68.5800,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
68.5800,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
60.9600,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore5_Wall_1, !- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
SMstore5, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
60.9600,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m}
60.9600,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
68.5800,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
68.5800,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore5_Wall_1_Window_1,!- Name
Window, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
SMstore5_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
61.570,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m}
61.570,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m}
63.700,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m}
63.700,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore5_Wall_1_Window_2,!- Name
Window, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
SMstore5_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
65.840,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m}
65.840,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m}
67.970,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m}
67.970,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore5_Wall_1_Door, !- Name
GlassDoor, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
SMstore5_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
63.860,0.0000,2.1300, !- X,Y,Z ==> Vertex 1 {m}
63.860,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
65.680,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
65.680,0.0000,2.1300; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore5_Wall_2, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
SMstore5, !- Zone Name
Surface, !- Outside Boundary Condition
LGstore2_Wall_4, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
60.9600,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
60.9600,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
60.9600,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
60.9600,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore5_Roof, !- Name
Roof, !- Surface Type
nonres_roof, !- Construction Name
SMstore5, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
68.5800,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
60.9600,22.8600,5.1800, !- X,Y,Z ==> Vertex 2 {m}
60.9600,0.0000,5.1800, !- X,Y,Z ==> Vertex 3 {m}
68.5800,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore5_Wall_3, !- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
SMstore5, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
68.5800,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
68.5800,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
60.9600,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
60.9600,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore5_Wall_3_Door, !- Name
Door, !- Surface Type
Swinging Door_con, !- Construction Name
SMstore5_Wall_3, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
65.680,22.8600,2.1300, !- X,Y,Z ==> Vertex 1 {m}
65.680,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
63.860,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
63.860,22.8600,2.1300; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore5_Wall_4, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
SMstore5, !- Zone Name
Surface, !- Outside Boundary Condition
SMstore6_Wall_2, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
68.5800,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m}
68.5800,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
68.5800,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
68.5800,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m}
InternalMass,
SMstore5_InternalMass_1, !- Name
InteriorFurnishings, !- Construction Name
SMstore5, !- Zone Name
348.3864; !- Surface Area {m2}
!- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION ===========
ZoneInfiltration:DesignFlowRate,
SMstore5_Infiltration, !- Name
SMstore5, !- Zone or ZoneList Name
Type3_Infil_SCH, !- Schedule Name
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
0.000177458624, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
0.0000, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0.2240, !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
ZoneInfiltration:DesignFlowRate,
SMstore5_Door_Infiltration, !- Name
SMstore5, !- Zone or ZoneList Name
INFIL_Door_Opening_SCH, !- Schedule Name
Flow/Zone, !- Design Flow Rate Calculation Method
0.134504895, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
1, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0., !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
People,
SMstore5, !- Name
SMstore5, !- Zone or ZoneList Name
Type3_OCC_SCH, !- Number of People Schedule Name
People, !- Number of People Calculation Method
14.9980, !- Number of People
, !- People per Zone Floor Area {person/m2}
, !- Zone Floor Area per Person {m2/person}
0.3000, !- Fraction Radiant
AUTOCALCULATE, !- Sensible Heat Fraction
ACTIVITY_SCH, !- Activity Level Schedule Name
, !- Carbon Dioxide Generation Rate {m3/s-W}
No, !- Enable ASHRAE 55 Comfort Warnings
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
, !- Surface Name/Angle Factor List Name
WORK_EFF_SCH, !- Work Efficiency Schedule Name
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
, !- Clothing Insulation Calculation Method Schedule Name
CLOTHING_SCH, !- Clothing Insulation Schedule Name
AIR_VELO_SCH, !- Air Velocity Schedule Name
FANGER; !- Thermal Comfort Model 1 Type
!- =========== ALL OBJECTS IN CLASS: LIGHTS ===========
Lights,
SMstore5_Lights, !- Name
SMstore5, !- Zone or ZoneList Name
Type3_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
9.584185835, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
Lights,
SMstore5_Lights_allowance, !- Name
SMstore5, !- Zone or ZoneList Name
Type3_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
0, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
ElectricEquipment,
SMstore5_MiscPlug_Equip, !- Name
SMstore5, !- Zone or ZoneList Name
TYPE3_EQUIP_SCH, !- Schedule Name
EquipmentLevel, !- Design Level Calculation Method
749.0308, !- Design Level {W}
, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Fraction Latent
0.5000, !- Fraction Radiant
0.0000, !- Fraction Lost
MiscPlug; !- End-Use Subcategory
Sizing:Zone,
SMstore5, !- Zone or ZoneList Name
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
12.8, !- Zone Cooling Design Supply Air Temperature {C}
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
40.0, !- Zone Heating Design Supply Air Temperature {C}
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
SZ DSOA SMstore5, !- Design Specification Outdoor Air Object Name
, !- Zone Heating Sizing Factor
, !- Zone Cooling Sizing Factor
DesignDay, !- Cooling Design Air Flow Method
0.0, !- Cooling Design Air Flow Rate {m3/s}
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
0.0, !- Cooling Minimum Air Flow {m3/s}
0.0, !- Cooling Minimum Air Flow Fraction
DesignDay, !- Heating Design Air Flow Method
0.0, !- Heating Design Air Flow Rate {m3/s}
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
, !- Heating Maximum Air Flow {m3/s}
; !- Heating Maximum Air Flow Fraction
DesignSpecification:OutdoorAir,
SZ DSOA SMstore5, !- Name
Flow/Area, !- Outdoor Air Method
, !- Outdoor Air Flow per Person {m3/s-person}
0.001181026, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
; !- Outdoor Air Flow per Zone {m3/s}
ZoneControl:Thermostat,
SMstore5 Thermostat, !- Name
SMstore5, !- Zone or ZoneList Name
Dual Zone Control Type Sched, !- Control Type Schedule Name
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
SMstore5 DualSPSched; !- Control 1 Name
ThermostatSetpoint:DualSetpoint,
SMstore5 DualSPSched, !- Name
Type3_HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
Type3_CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
ZoneHVAC:EquipmentConnections,
SMstore5, !- Zone Name
SMstore5 Equipment, !- Zone Conditioning Equipment List Name
SMstore5 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
, !- Zone Air Exhaust Node or NodeList Name
SMstore5 Air Node, !- Zone Air Node Name
SMstore5 Return Air Node Name; !- Zone Return Air Node or NodeList Name
NodeList,
SMstore5 Inlet Nodes, !- Name
SMstore5 Direct Air Inlet Node Name; !- Node 1 Name
ZoneHVAC:EquipmentList,
SMstore5 Equipment, !- Name
SequentialLoad, !- Load Distribution Scheme
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
SMstore5 Direct Air, !- Zone Equipment 1 Name
1, !- Zone Equipment 1 Cooling Sequence
1; !- Zone Equipment 1 Heating or No-Load Sequence
AirTerminal:SingleDuct:Uncontrolled,
SMstore5 Direct Air, !- Name
ALWAYS_ON, !- Availability Schedule Name
SMstore5 Direct Air Inlet Node Name, !- Zone Supply Air Node Name
AUTOSIZE; !- Maximum Air Flow Rate {m3/s}
SetpointManager:SingleZone:Heating,
SupAirTemp MngrSMstore5 - Htg, !- Name
Temperature, !- Control Variable
10.0, !- Minimum Supply Air Temperature
48.89, !- Maximum Supply Air Temperature
SMstore5, !- Control Zone Name
SMstore5 Air Node, !- Zone Node Name
SMstore5 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC_7:7_Unitary_PackageCoolCoil air inlet; !- Setpoint Node or NodeList Name
SetpointManager:SingleZone:Cooling,
SupAirTemp MngrSMstore5 - Clg, !- Name
Temperature, !- Control Variable
10.0, !- Minimum Supply Air Temperature
48.89, !- Maximum Supply Air Temperature
SMstore5, !- Control Zone Name
SMstore5 Air Node, !- Zone Node Name
SMstore5 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC_7:7 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
Zone,
SMstore6, !- Name
0.0000, !- Direction of Relative North {deg}
0.0000, !- X Origin {m}
0.0000, !- Y Origin {m}
0.0000, !- Z Origin {m}
1, !- Type
1.0000, !- Multiplier
-9999.0000, !- Ceiling Height {m}
902.6000, !- Volume {m3}
autocalculate, !- Floor Area {m2}
, !- Zone Inside Convection Algorithm
, !- Zone Outside Convection Algorithm
Yes; !- Part of Total Floor Area
BuildingSurface:Detailed,
SMstore6_Floor, !- Name
Floor, !- Surface Type
SMstore6_Floor_Ffactor, !- Construction Name
SMstore6, !- Zone Name
GroundFCfactorMethod, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
68.5800,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m}
76.2000,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
76.2000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
68.5800,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore6_Wall_1, !- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
SMstore6, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
68.5800,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m}
68.5800,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
76.2000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
76.2000,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore6_Wall_1_Window_1,!- Name
Window, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
SMstore6_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
69.190,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m}
69.190,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m}
71.320,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m}
71.320,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore6_Wall_1_Window_2,!- Name
Window, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
SMstore6_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
73.460,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m}
73.460,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m}
75.590,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m}
75.590,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore6_Wall_1_Door, !- Name
GlassDoor, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
SMstore6_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
71.480,0.0000,2.1300, !- X,Y,Z ==> Vertex 1 {m}
71.480,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
73.300,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
73.300,0.0000,2.1300; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore6_Wall_2, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
SMstore6, !- Zone Name
Surface, !- Outside Boundary Condition
SMstore5_Wall_4, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
68.5800,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
68.5800,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
68.5800,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
68.5800,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore6_Roof, !- Name
Roof, !- Surface Type
nonres_roof, !- Construction Name
SMstore6, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
76.2000,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
68.5800,22.8600,5.1800, !- X,Y,Z ==> Vertex 2 {m}
68.5800,0.0000,5.1800, !- X,Y,Z ==> Vertex 3 {m}
76.2000,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore6_Wall_3, !- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
SMstore6, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
76.2000,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
76.2000,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
68.5800,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
68.5800,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore6_Wall_3_Door, !- Name
Door, !- Surface Type
Swinging Door_con, !- Construction Name
SMstore6_Wall_3, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
73.300,22.8600,2.1300, !- X,Y,Z ==> Vertex 1 {m}
73.300,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
71.480,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
71.480,22.8600,2.1300; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore6_Wall_4, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
SMstore6, !- Zone Name
Surface, !- Outside Boundary Condition
SMstore7_Wall_2, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
76.2000,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m}
76.2000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
76.2000,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
76.2000,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m}
InternalMass,
SMstore6_InternalMass_1, !- Name
InteriorFurnishings, !- Construction Name
SMstore6, !- Zone Name
348.3864; !- Surface Area {m2}
!- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION ===========
ZoneInfiltration:DesignFlowRate,
SMstore6_Infiltration, !- Name
SMstore6, !- Zone or ZoneList Name
Type3_Infil_SCH, !- Schedule Name
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
0.000177458624, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
0.0000, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0.2240, !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
ZoneInfiltration:DesignFlowRate,
SMstore6_Door_Infiltration, !- Name
SMstore6, !- Zone or ZoneList Name
INFIL_Door_Opening_SCH, !- Schedule Name
Flow/Zone, !- Design Flow Rate Calculation Method
0.134504895, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
1, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0., !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
People,
SMstore6, !- Name
SMstore6, !- Zone or ZoneList Name
Type3_OCC_SCH, !- Number of People Schedule Name
People, !- Number of People Calculation Method
14.9980, !- Number of People
, !- People per Zone Floor Area {person/m2}
, !- Zone Floor Area per Person {m2/person}
0.3000, !- Fraction Radiant
AUTOCALCULATE, !- Sensible Heat Fraction
ACTIVITY_SCH, !- Activity Level Schedule Name
, !- Carbon Dioxide Generation Rate {m3/s-W}
No, !- Enable ASHRAE 55 Comfort Warnings
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
, !- Surface Name/Angle Factor List Name
WORK_EFF_SCH, !- Work Efficiency Schedule Name
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
, !- Clothing Insulation Calculation Method Schedule Name
CLOTHING_SCH, !- Clothing Insulation Schedule Name
AIR_VELO_SCH, !- Air Velocity Schedule Name
FANGER; !- Thermal Comfort Model 1 Type
!- =========== ALL OBJECTS IN CLASS: LIGHTS ===========
Lights,
SMstore6_Lights, !- Name
SMstore6, !- Zone or ZoneList Name
Type3_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
9.584185835, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
Lights,
SMstore6_Lights_allowance, !- Name
SMstore6, !- Zone or ZoneList Name
Type3_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
0, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
ElectricEquipment,
SMstore6_MiscPlug_Equip, !- Name
SMstore6, !- Zone or ZoneList Name
TYPE3_EQUIP_SCH, !- Schedule Name
EquipmentLevel, !- Design Level Calculation Method
749.0308, !- Design Level {W}
, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Fraction Latent
0.5000, !- Fraction Radiant
0.0000, !- Fraction Lost
MiscPlug; !- End-Use Subcategory
Sizing:Zone,
SMstore6, !- Zone or ZoneList Name
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
12.8, !- Zone Cooling Design Supply Air Temperature {C}
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
40.0, !- Zone Heating Design Supply Air Temperature {C}
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
SZ DSOA SMstore6, !- Design Specification Outdoor Air Object Name
, !- Zone Heating Sizing Factor
, !- Zone Cooling Sizing Factor
DesignDay, !- Cooling Design Air Flow Method
0.0, !- Cooling Design Air Flow Rate {m3/s}
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
0.0, !- Cooling Minimum Air Flow {m3/s}
0.0, !- Cooling Minimum Air Flow Fraction
DesignDay, !- Heating Design Air Flow Method
0.0, !- Heating Design Air Flow Rate {m3/s}
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
, !- Heating Maximum Air Flow {m3/s}
; !- Heating Maximum Air Flow Fraction
DesignSpecification:OutdoorAir,
SZ DSOA SMstore6, !- Name
Flow/Area, !- Outdoor Air Method
, !- Outdoor Air Flow per Person {m3/s-person}
0.001181026, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
; !- Outdoor Air Flow per Zone {m3/s}
ZoneControl:Thermostat,
SMstore6 Thermostat, !- Name
SMstore6, !- Zone or ZoneList Name
Dual Zone Control Type Sched, !- Control Type Schedule Name
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
SMstore6 DualSPSched; !- Control 1 Name
ThermostatSetpoint:DualSetpoint,
SMstore6 DualSPSched, !- Name
Type3_HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
Type3_CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
ZoneHVAC:EquipmentConnections,
SMstore6, !- Zone Name
SMstore6 Equipment, !- Zone Conditioning Equipment List Name
SMstore6 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
, !- Zone Air Exhaust Node or NodeList Name
SMstore6 Air Node, !- Zone Air Node Name
SMstore6 Return Air Node Name; !- Zone Return Air Node or NodeList Name
NodeList,
SMstore6 Inlet Nodes, !- Name
SMstore6 Direct Air Inlet Node Name; !- Node 1 Name
ZoneHVAC:EquipmentList,
SMstore6 Equipment, !- Name
SequentialLoad, !- Load Distribution Scheme
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
SMstore6 Direct Air, !- Zone Equipment 1 Name
1, !- Zone Equipment 1 Cooling Sequence
1; !- Zone Equipment 1 Heating or No-Load Sequence
AirTerminal:SingleDuct:Uncontrolled,
SMstore6 Direct Air, !- Name
ALWAYS_ON, !- Availability Schedule Name
SMstore6 Direct Air Inlet Node Name, !- Zone Supply Air Node Name
AUTOSIZE; !- Maximum Air Flow Rate {m3/s}
SetpointManager:SingleZone:Heating,
SupAirTemp MngrSMstore6 - Htg, !- Name
Temperature, !- Control Variable
10.0, !- Minimum Supply Air Temperature
48.89, !- Maximum Supply Air Temperature
SMstore6, !- Control Zone Name
SMstore6 Air Node, !- Zone Node Name
SMstore6 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC_8:8_Unitary_PackageCoolCoil air inlet; !- Setpoint Node or NodeList Name
SetpointManager:SingleZone:Cooling,
SupAirTemp MngrSMstore6 - Clg, !- Name
Temperature, !- Control Variable
10.0, !- Minimum Supply Air Temperature
48.89, !- Maximum Supply Air Temperature
SMstore6, !- Control Zone Name
SMstore6 Air Node, !- Zone Node Name
SMstore6 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC_8:8 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
Zone,
SMstore7, !- Name
0.0000, !- Direction of Relative North {deg}
0.0000, !- X Origin {m}
0.0000, !- Y Origin {m}
0.0000, !- Z Origin {m}
1, !- Type
1.0000, !- Multiplier
-9999.0000, !- Ceiling Height {m}
902.6000, !- Volume {m3}
autocalculate, !- Floor Area {m2}
, !- Zone Inside Convection Algorithm
, !- Zone Outside Convection Algorithm
Yes; !- Part of Total Floor Area
BuildingSurface:Detailed,
SMstore7_Floor, !- Name
Floor, !- Surface Type
SMstore7_Floor_Ffactor, !- Construction Name
SMstore7, !- Zone Name
GroundFCfactorMethod, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
76.2000,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m}
83.8200,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
83.8200,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
76.2000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore7_Wall_1, !- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
SMstore7, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
76.2000,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m}
76.2000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
83.8200,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
83.8200,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore7_Wall_1_Window_1,!- Name
Window, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
SMstore7_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
76.810,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m}
76.810,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m}
78.940,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m}
78.940,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore7_Wall_1_Window_2,!- Name
Window, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
SMstore7_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
81.080,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m}
81.080,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m}
83.210,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m}
83.210,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore7_Wall_1_Door, !- Name
GlassDoor, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
SMstore7_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
79.100,0.0000,2.1300, !- X,Y,Z ==> Vertex 1 {m}
79.100,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
80.920,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
80.920,0.0000,2.1300; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore7_Wall_2, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
SMstore7, !- Zone Name
Surface, !- Outside Boundary Condition
SMstore6_Wall_4, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
76.2000,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
76.2000,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
76.2000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
76.2000,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore7_Roof, !- Name
Roof, !- Surface Type
nonres_roof, !- Construction Name
SMstore7, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
83.8200,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
76.2000,22.8600,5.1800, !- X,Y,Z ==> Vertex 2 {m}
76.2000,0.0000,5.1800, !- X,Y,Z ==> Vertex 3 {m}
83.8200,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore7_Wall_3, !- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
SMstore7, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
83.8200,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
83.8200,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
76.2000,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
76.2000,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore7_Wall_3_Door, !- Name
Door, !- Surface Type
Swinging Door_con, !- Construction Name
SMstore7_Wall_3, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
80.920,22.8600,2.1300, !- X,Y,Z ==> Vertex 1 {m}
80.920,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
79.100,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
79.100,22.8600,2.1300; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore7_Wall_4, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
SMstore7, !- Zone Name
Surface, !- Outside Boundary Condition
SMstore8_Wall_2, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
83.8200,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m}
83.8200,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
83.8200,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
83.8200,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m}
InternalMass,
SMstore7_InternalMass_1, !- Name
InteriorFurnishings, !- Construction Name
SMstore7, !- Zone Name
348.3864; !- Surface Area {m2}
!- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION ===========
ZoneInfiltration:DesignFlowRate,
SMstore7_Infiltration, !- Name
SMstore7, !- Zone or ZoneList Name
Type3_Infil_SCH, !- Schedule Name
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
0.000177458624, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
0.0000, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0.2240, !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
ZoneInfiltration:DesignFlowRate,
SMstore7_Door_Infiltration, !- Name
SMstore7, !- Zone or ZoneList Name
INFIL_Door_Opening_SCH, !- Schedule Name
Flow/Zone, !- Design Flow Rate Calculation Method
0.134504895, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
1, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0., !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
People,
SMstore7, !- Name
SMstore7, !- Zone or ZoneList Name
Type3_OCC_SCH, !- Number of People Schedule Name
People, !- Number of People Calculation Method
14.9980, !- Number of People
, !- People per Zone Floor Area {person/m2}
, !- Zone Floor Area per Person {m2/person}
0.3000, !- Fraction Radiant
AUTOCALCULATE, !- Sensible Heat Fraction
ACTIVITY_SCH, !- Activity Level Schedule Name
, !- Carbon Dioxide Generation Rate {m3/s-W}
No, !- Enable ASHRAE 55 Comfort Warnings
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
, !- Surface Name/Angle Factor List Name
WORK_EFF_SCH, !- Work Efficiency Schedule Name
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
, !- Clothing Insulation Calculation Method Schedule Name
CLOTHING_SCH, !- Clothing Insulation Schedule Name
AIR_VELO_SCH, !- Air Velocity Schedule Name
FANGER; !- Thermal Comfort Model 1 Type
Lights,
SMstore7_Lights, !- Name
SMstore7, !- Zone or ZoneList Name
Type3_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
9.584185835, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
Lights,
SMstore7_Lights_allowance, !- Name
SMstore7, !- Zone or ZoneList Name
Type3_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
0, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
ElectricEquipment,
SMstore7_MiscPlug_Equip, !- Name
SMstore7, !- Zone or ZoneList Name
TYPE3_EQUIP_SCH, !- Schedule Name
EquipmentLevel, !- Design Level Calculation Method
749.0308, !- Design Level {W}
, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Fraction Latent
0.5000, !- Fraction Radiant
0.0000, !- Fraction Lost
MiscPlug; !- End-Use Subcategory
Sizing:Zone,
SMstore7, !- Zone or ZoneList Name
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
12.8, !- Zone Cooling Design Supply Air Temperature {C}
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
40.0, !- Zone Heating Design Supply Air Temperature {C}
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
SZ DSOA SMstore7, !- Design Specification Outdoor Air Object Name
, !- Zone Heating Sizing Factor
, !- Zone Cooling Sizing Factor
DesignDay, !- Cooling Design Air Flow Method
0.0, !- Cooling Design Air Flow Rate {m3/s}
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
0.0, !- Cooling Minimum Air Flow {m3/s}
0.0, !- Cooling Minimum Air Flow Fraction
DesignDay, !- Heating Design Air Flow Method
0.0, !- Heating Design Air Flow Rate {m3/s}
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
, !- Heating Maximum Air Flow {m3/s}
; !- Heating Maximum Air Flow Fraction
DesignSpecification:OutdoorAir,
SZ DSOA SMstore7, !- Name
Flow/Area, !- Outdoor Air Method
, !- Outdoor Air Flow per Person {m3/s-person}
0.001181026, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
; !- Outdoor Air Flow per Zone {m3/s}
ZoneControl:Thermostat,
SMstore7 Thermostat, !- Name
SMstore7, !- Zone or ZoneList Name
Dual Zone Control Type Sched, !- Control Type Schedule Name
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
SMstore7 DualSPSched; !- Control 1 Name
ThermostatSetpoint:DualSetpoint,
SMstore7 DualSPSched, !- Name
Type3_HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
Type3_CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
ZoneHVAC:EquipmentConnections,
SMstore7, !- Zone Name
SMstore7 Equipment, !- Zone Conditioning Equipment List Name
SMstore7 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
, !- Zone Air Exhaust Node or NodeList Name
SMstore7 Air Node, !- Zone Air Node Name
SMstore7 Return Air Node Name; !- Zone Return Air Node or NodeList Name
NodeList,
SMstore7 Inlet Nodes, !- Name
SMstore7 Direct Air Inlet Node Name; !- Node 1 Name
ZoneHVAC:EquipmentList,
SMstore7 Equipment, !- Name
SequentialLoad, !- Load Distribution Scheme
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
SMstore7 Direct Air, !- Zone Equipment 1 Name
1, !- Zone Equipment 1 Cooling Sequence
1; !- Zone Equipment 1 Heating or No-Load Sequence
AirTerminal:SingleDuct:Uncontrolled,
SMstore7 Direct Air, !- Name
ALWAYS_ON, !- Availability Schedule Name
SMstore7 Direct Air Inlet Node Name, !- Zone Supply Air Node Name
AUTOSIZE; !- Maximum Air Flow Rate {m3/s}
SetpointManager:SingleZone:Heating,
SupAirTemp MngrSMstore7 - Htg, !- Name
Temperature, !- Control Variable
10.0, !- Minimum Supply Air Temperature
48.89, !- Maximum Supply Air Temperature
SMstore7, !- Control Zone Name
SMstore7 Air Node, !- Zone Node Name
SMstore7 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC_9:9_Unitary_PackageCoolCoil air inlet; !- Setpoint Node or NodeList Name
SetpointManager:SingleZone:Cooling,
SupAirTemp MngrSMstore7 - Clg, !- Name
Temperature, !- Control Variable
10.0, !- Minimum Supply Air Temperature
48.89, !- Maximum Supply Air Temperature
SMstore7, !- Control Zone Name
SMstore7 Air Node, !- Zone Node Name
SMstore7 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC_9:9 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
Zone,
SMstore8, !- Name
0.0000, !- Direction of Relative North {deg}
0.0000, !- X Origin {m}
0.0000, !- Y Origin {m}
0.0000, !- Z Origin {m}
1, !- Type
1.0000, !- Multiplier
-9999.0000, !- Ceiling Height {m}
902.6000, !- Volume {m3}
autocalculate, !- Floor Area {m2}
, !- Zone Inside Convection Algorithm
, !- Zone Outside Convection Algorithm
Yes; !- Part of Total Floor Area
BuildingSurface:Detailed,
SMstore8_Floor, !- Name
Floor, !- Surface Type
SMstore8_Floor_Ffactor, !- Construction Name
SMstore8, !- Zone Name
GroundFCfactorMethod, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
83.8200,22.8600,0.0000, !- X,Y,Z ==> Vertex 1 {m}
91.4400,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
91.4400,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
83.8200,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore8_Wall_1, !- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
SMstore8, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
83.8200,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m}
83.8200,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
91.4400,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
91.4400,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore8_Wall_1_Window_1,!- Name
Window, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
SMstore8_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
84.430,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m}
84.430,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m}
86.560,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m}
86.560,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore8_Wall_1_Window_2,!- Name
Window, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
SMstore8_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
88.700,0.0000,2.4300, !- X,Y,Z ==> Vertex 1 {m}
88.700,0.0000,0.9100, !- X,Y,Z ==> Vertex 2 {m}
90.830,0.0000,0.9100, !- X,Y,Z ==> Vertex 3 {m}
90.830,0.0000,2.4300; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore8_Wall_1_Door, !- Name
GlassDoor, !- Surface Type
NonresWindow_U_0.34_SHGC_0.38, !- Construction Name
SMstore8_Wall_1, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
86.720,0.0000,2.1300, !- X,Y,Z ==> Vertex 1 {m}
86.720,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
88.540,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
88.540,0.0000,2.1300; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore8_Wall_2, !- Name
Wall, !- Surface Type
int_wall, !- Construction Name
SMstore8, !- Zone Name
Surface, !- Outside Boundary Condition
SMstore7_Wall_4, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
83.8200,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
83.8200,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
83.8200,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
83.8200,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore8_Roof, !- Name
Roof, !- Surface Type
nonres_roof, !- Construction Name
SMstore8, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
91.4400,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
83.8200,22.8600,5.1800, !- X,Y,Z ==> Vertex 2 {m}
83.8200,0.0000,5.1800, !- X,Y,Z ==> Vertex 3 {m}
91.4400,0.0000,5.1800; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore8_Wall_3, !- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
SMstore8, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
91.4400,22.8600,5.1800, !- X,Y,Z ==> Vertex 1 {m}
91.4400,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
83.8200,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
83.8200,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
SMstore8_Wall_3_Door, !- Name
Door, !- Surface Type
Swinging Door_con, !- Construction Name
SMstore8_Wall_3, !- Building Surface Name
, !- Outside Boundary Condition Object
AutoCalculate, !- View Factor to Ground
, !- Frame and Divider Name
1.0000, !- Multiplier
4, !- Number of Vertices
88.540,22.8600,2.1300, !- X,Y,Z ==> Vertex 1 {m}
88.540,22.8600,0.0000, !- X,Y,Z ==> Vertex 2 {m}
86.720,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
86.720,22.8600,2.1300; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
SMstore8_Wall_4, !- Name
Wall, !- Surface Type
nonres_ext_wall, !- Construction Name
SMstore8, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
91.4400,0.0000,5.1800, !- X,Y,Z ==> Vertex 1 {m}
91.4400,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
91.4400,22.8600,0.0000, !- X,Y,Z ==> Vertex 3 {m}
91.4400,22.8600,5.1800; !- X,Y,Z ==> Vertex 4 {m}
InternalMass,
SMstore8_InternalMass_1, !- Name
InteriorFurnishings, !- Construction Name
SMstore8, !- Zone Name
348.3864; !- Surface Area {m2}
!- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION ===========
ZoneInfiltration:DesignFlowRate,
SMstore8_Infiltration, !- Name
SMstore8, !- Zone or ZoneList Name
Type3_Infil_SCH, !- Schedule Name
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
0.000302231552, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
0.0000, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0.2240, !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
ZoneInfiltration:DesignFlowRate,
SMstore8_Door_Infiltration, !- Name
SMstore8, !- Zone or ZoneList Name
INFIL_Door_Opening_SCH, !- Schedule Name
Flow/Zone, !- Design Flow Rate Calculation Method
0.134504895, !- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
, !- Flow per Exterior Surface Area {m3/s-m2}
, !- Air Changes per Hour {1/hr}
1, !- Constant Term Coefficient
0.0000, !- Temperature Term Coefficient
0., !- Velocity Term Coefficient
0.0000; !- Velocity Squared Term Coefficient
People,
SMstore8, !- Name
SMstore8, !- Zone or ZoneList Name
Type3_OCC_SCH, !- Number of People Schedule Name
People, !- Number of People Calculation Method
14.9980, !- Number of People
, !- People per Zone Floor Area {person/m2}
, !- Zone Floor Area per Person {m2/person}
0.3000, !- Fraction Radiant
AUTOCALCULATE, !- Sensible Heat Fraction
ACTIVITY_SCH, !- Activity Level Schedule Name
, !- Carbon Dioxide Generation Rate {m3/s-W}
No, !- Enable ASHRAE 55 Comfort Warnings
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
, !- Surface Name/Angle Factor List Name
WORK_EFF_SCH, !- Work Efficiency Schedule Name
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
, !- Clothing Insulation Calculation Method Schedule Name
CLOTHING_SCH, !- Clothing Insulation Schedule Name
AIR_VELO_SCH, !- Air Velocity Schedule Name
FANGER; !- Thermal Comfort Model 1 Type
!- =========== ALL OBJECTS IN CLASS: LIGHTS ===========
Lights,
SMstore8_Lights, !- Name
SMstore8, !- Zone or ZoneList Name
Type3_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
9.584185835, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
Lights,
SMstore8_Lights_allowance, !- Name
SMstore8, !- Zone or ZoneList Name
Type3_LIGHT_SCH, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
0, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Return Air Fraction
0.7000, !- Fraction Radiant
0.2000, !- Fraction Visible
1.0000, !- Fraction Replaceable
LightsWired, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
ElectricEquipment,
SMstore8_MiscPlug_Equip, !- Name
SMstore8, !- Zone or ZoneList Name
TYPE3_EQUIP_SCH, !- Schedule Name
EquipmentLevel, !- Design Level Calculation Method
749.0308, !- Design Level {W}
, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0.0000, !- Fraction Latent
0.5000, !- Fraction Radiant
0.0000, !- Fraction Lost
MiscPlug; !- End-Use Subcategory
Sizing:Zone,
SMstore8, !- Zone or ZoneList Name
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
12.8, !- Zone Cooling Design Supply Air Temperature {C}
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
40.0, !- Zone Heating Design Supply Air Temperature {C}
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
SZ DSOA SMstore8, !- Design Specification Outdoor Air Object Name
, !- Zone Heating Sizing Factor
, !- Zone Cooling Sizing Factor
DesignDay, !- Cooling Design Air Flow Method
0.0, !- Cooling Design Air Flow Rate {m3/s}
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
0.0, !- Cooling Minimum Air Flow {m3/s}
0.0, !- Cooling Minimum Air Flow Fraction
DesignDay, !- Heating Design Air Flow Method
0.0, !- Heating Design Air Flow Rate {m3/s}
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
, !- Heating Maximum Air Flow {m3/s}
; !- Heating Maximum Air Flow Fraction
DesignSpecification:OutdoorAir,
SZ DSOA SMstore8, !- Name
Flow/Area, !- Outdoor Air Method
, !- Outdoor Air Flow per Person {m3/s-person}
0.001181026, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
; !- Outdoor Air Flow per Zone {m3/s}
ZoneControl:Thermostat,
SMstore8 Thermostat, !- Name
SMstore8, !- Zone or ZoneList Name
Dual Zone Control Type Sched, !- Control Type Schedule Name
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
SMstore8 DualSPSched; !- Control 1 Name
ThermostatSetpoint:DualSetpoint,
SMstore8 DualSPSched, !- Name
Type3_HTGSETP_SCH_NO_OPTIMUM, !- Heating Setpoint Temperature Schedule Name
Type3_CLGSETP_SCH_NO_OPTIMUM; !- Cooling Setpoint Temperature Schedule Name
ZoneHVAC:EquipmentConnections,
SMstore8, !- Zone Name
SMstore8 Equipment, !- Zone Conditioning Equipment List Name
SMstore8 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
, !- Zone Air Exhaust Node or NodeList Name
SMstore8 Air Node, !- Zone Air Node Name
SMstore8 Return Air Node Name; !- Zone Return Air Node or NodeList Name
NodeList,
SMstore8 Inlet Nodes, !- Name
SMstore8 Direct Air Inlet Node Name; !- Node 1 Name
ZoneHVAC:EquipmentList,
SMstore8 Equipment, !- Name
SequentialLoad, !- Load Distribution Scheme
AirTerminal:SingleDuct:Uncontrolled, !- Zone Equipment 1 Object Type
SMstore8 Direct Air, !- Zone Equipment 1 Name
1, !- Zone Equipment 1 Cooling Sequence
1; !- Zone Equipment 1 Heating or No-Load Sequence
AirTerminal:SingleDuct:Uncontrolled,
SMstore8 Direct Air, !- Name
ALWAYS_ON, !- Availability Schedule Name
SMstore8 Direct Air Inlet Node Name, !- Zone Supply Air Node Name
AUTOSIZE; !- Maximum Air Flow Rate {m3/s}
SetpointManager:SingleZone:Heating,
SupAirTemp MngrSMstore8 - Htg, !- Name
Temperature, !- Control Variable
10.0, !- Minimum Supply Air Temperature
48.89, !- Maximum Supply Air Temperature
SMstore8, !- Control Zone Name
SMstore8 Air Node, !- Zone Node Name
SMstore8 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC_10:10_Unitary_PackageCoolCoil air inlet; !- Setpoint Node or NodeList Name
SetpointManager:SingleZone:Cooling,
SupAirTemp MngrSMstore8 - Clg, !- Name
Temperature, !- Control Variable
10.0, !- Minimum Supply Air Temperature
48.89, !- Maximum Supply Air Temperature
SMstore8, !- Control Zone Name
SMstore8 Air Node, !- Zone Node Name
SMstore8 Direct Air Inlet Node Name, !- Zone Inlet Node Name
PSZ-AC_10:10 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
AirLoopHVAC,
PSZ-AC_1:1, !- Name
, !- Controller List Name
PSZ-AC_1:1 Availability Manager List, !- Availability Manager List Name
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
PSZ-AC_1:1 Air Loop Branches, !- Branch List Name
, !- Connector List Name
PSZ-AC_1:1 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
PSZ-AC_1:1 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
PSZ-AC_1:1 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
PSZ-AC_1:1 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
Sizing:System,
PSZ-AC_1:1, !- AirLoop Name
Sensible, !- Type of Load to Size On
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
1.0000, !- Central Heating Maximum System Air Flow Ratio
7.0, !- Preheat Design Temperature {C}
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Precool Design Temperature {C}
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Central Cooling Design Supply Air Temperature {C}
40, !- Central Heating Design Supply Air Temperature {C}
Coincident, !- Sizing Option
No, !- 100% Outdoor Air in Cooling
No, !- 100% Outdoor Air in Heating
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
DesignDay, !- Cooling Supply Air Flow Rate Method
0.0, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
DesignDay, !- Heating Supply Air Flow Rate Method
0.0, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
ZoneSum, !- System Outdoor Air Method
1.0, !- Zone Maximum Outdoor Air Fraction
CoolingDesignCapacity, !- Cooling Design Capacity Method
autosize, !- Cooling Design Capacity {W}
, !- Cooling Design Capacity Per Floor Area {W/m2}
, !- Fraction of Autosized Cooling Design Capacity
HeatingDesignCapacity, !- Heating Design Capacity Method
autosize, !- Heating Design Capacity {W}
, !- Heating Design Capacity Per Floor Area {W/m2}
, !- Fraction of Autosized Heating Design Capacity
OnOff; !- Central Cooling Capacity Control Method
AvailabilityManagerAssignmentList,
PSZ-AC_1:1 Availability Manager List, !- Name
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
PSZ-AC_1:1 Availability Manager; !- Availability Manager 1 Name
AvailabilityManager:NightCycle,
PSZ-AC_1:1 Availability Manager, !- Name
Always_On, !- Applicability Schedule Name
Type1_FAN_SCH, !- Fan Schedule Name
CycleOnAny, !- Control Type
1.0, !- Thermostat Tolerance {deltaC}
FixedRunTime, !- Cycling Run Time Control Type
1800; !- Cycling Run Time {s}
BranchList,
PSZ-AC_1:1 Air Loop Branches, !- Name
PSZ-AC_1:1 Air Loop Main Branch; !- Branch 1 Name
Branch,
PSZ-AC_1:1 Air Loop Main Branch, !- Name
, !- Pressure Drop Curve Name
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
PSZ-AC_1:1_OA, !- Component 1 Name
PSZ-AC_1:1 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
PSZ-AC_1:1_OA-PSZ-AC_1:1_Unitary_PackageNode, !- Component 1 Outlet Node Name
AirLoopHVAC:UnitarySystem, !- Component 2 Object Type
PSZ-AC_1:1_Unitary_Package_DX, !- Component 2 Name
PSZ-AC_1:1_OA-PSZ-AC_1:1_Unitary_PackageNode, !- Component 2 Inlet Node Name
PSZ-AC_1:1 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name
AirLoopHVAC:ControllerList,
PSZ-AC_1:1_OA_Controllers, !- Name
Controller:OutdoorAir, !- Controller 1 Object Type
PSZ-AC_1:1_OA_Controller;!- Controller 1 Name
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
PSZ-AC_1:1_OA_Equipment, !- Name
OutdoorAir:Mixer, !- Component 1 Object Type
PSZ-AC_1:1_OAMixing Box; !- Component 1 Name
AirLoopHVAC:OutdoorAirSystem,
PSZ-AC_1:1_OA, !- Name
PSZ-AC_1:1_OA_Controllers, !- Controller List Name
PSZ-AC_1:1_OA_Equipment, !- Outdoor Air Equipment List Name
PSZ-AC_1:1 Availability Manager List; !- Availability Manager List Name
OutdoorAir:NodeList,
PSZ-AC_1:1_OANode List; !- Node or NodeList Name 1
NodeList,
PSZ-AC_1:1_OANode List, !- Name
PSZ-AC_1:1_OAInlet Node; !- Node 1 Name
OutdoorAir:Mixer,
PSZ-AC_1:1_OAMixing Box, !- Name
PSZ-AC_1:1_OA-PSZ-AC_1:1_Unitary_PackageNode, !- Mixed Air Node Name
PSZ-AC_1:1_OAInlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name
PSZ-AC_1:1_OARelief Node,!- Relief Air Stream Node Name
PSZ-AC_1:1 Supply Equipment Inlet Node; !- Return Air Stream Node Name
SetpointManager:MixedAir,
PSZ-AC_1:1_OAMixed Air Temp Manager, !- Name
Temperature, !- Control Variable
PSZ-AC_1:1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
PSZ-AC_1:1_OA-PSZ-AC_1:1_Unitary_PackageNode, !- Fan Inlet Node Name
PSZ-AC_1:1_Unitary_PackageHeatCoil air inlet, !- Fan Outlet Node Name
PSZ-AC_1:1_OA-PSZ-AC_1:1_Unitary_PackageNode; !- Setpoint Node or NodeList Name
Controller:OutdoorAir,
PSZ-AC_1:1_OA_Controller, !- Name
PSZ-AC_1:1_OARelief Node, !- Relief Air Outlet Node Name
PSZ-AC_1:1 Supply Equipment Inlet Node, !- Return Air Node Name
PSZ-AC_1:1_OA-PSZ-AC_1:1_Unitary_PackageNode, !- Mixed Air Node Name
PSZ-AC_1:1_OAInlet Node, !- Actuator Node Name
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
DifferentialDryBulb, !- Economizer Control Type
ModulateFlow, !- Economizer Control Action Type
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
, !- Economizer Maximum Limit Dewpoint Temperature {C}
, !- Electronic Enthalpy Limit Curve Name
0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
LockoutWithHeating, !- Lockout Type
FixedMinimum, !- Minimum Limit Type
Type1_MinOA_MotorizedDamper_SCH, !- Minimum Outdoor Air Schedule Name
, !- Minimum Fraction of Outdoor Air Schedule Name
SZ_system_OA_Max_Frac_SCH, !- Maximum Fraction of Outdoor Air Schedule Name
, !- Mechanical Ventilation Controller Name
, !- Time of Day Economizer Control Schedule Name
, !- High Humidity Control
, !- Humidistat Control Zone Name
, !- High Humidity Outdoor Air Flow Ratio
, !- Control High Indoor Humidity Based on Outdoor Humidity Ratio
; !- Heat Recovery Bypass Control Type
!- Heat Recovery Bypass Control Type
AirLoopHVAC:UnitarySystem,
PSZ-AC_1:1_Unitary_Package_DX, !- Name
Load, !- Control Type
LGstore1, !- Controlling Zone or Thermostat Location
None, !- Dehumidification Control Type
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC_1:1_OA-PSZ-AC_1:1_Unitary_PackageNode, !- Air Inlet Node Name
PSZ-AC_1:1 Supply Equipment Outlet Node, !- Air Outlet Node Name
Fan:SystemModel, !- Supply Fan Object Type
PSZ-AC_1:1_addAQ_Unitary_Package_fan, !- Supply Fan Name
BlowThrough, !- Fan Placement
Type1_FAN_SCH, !- Supply Air Fan Operating Mode Schedule Name
Coil:Heating:Fuel, !- Heating Coil Object Type
PSZ-AC_1:1_Unitary_Package_HeatCoil, !- Heating Coil Name
1, !- DX Heating Coil Sizing Ratio
Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type
PSZ-AC_1:1_Unitary_Package_CoolCoil, !- Cooling Coil Name
No, !- Use DOAS DX Cooling Coil
2, !- Minimum Supply Air Temperature {C}
SensibleOnlyLoadControl, !- Latent Load Control
, !- Supplemental Heating Coil Object Type
, !- Supplemental Heating Coil Name
SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method
AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method
AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method
AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s}
, !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- No Load Fraction of Autosized Cooling Supply Air Flow Rate
, !- No Load Fraction of Autosized Heating Supply Air Flow Rate
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W}
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W}
AUTOSIZE, !- Maximum Supply Air Temperature {C}
, !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C}
, !- Outdoor Dry-Bulb Temperature Sensor Node Name
, !- Maximum Cycling Rate {cycles/hr}
, !- Heat Pump Time Constant {s}
, !- Fraction of On-Cycle Power Use
, !- Heat Pump Fan Delay Time {s}
, !- Ancillary On-Cycle Electric Power {W}
, !- Ancillary Off-Cycle Electric Power {W}
, !- Design Heat Recovery Water Flow Rate {m3/s}
, !- Maximum Temperature for Heat Recovery {C}
, !- Heat Recovery Water Inlet Node Name
, !- Heat Recovery Water Outlet Node Name
UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type
PSZ-AC_1:1_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name
UnitarySystemPerformance:Multispeed,
PSZ-AC_1:1_Unitary_Package_DX_Perf, !- Name
2, !- Number of Speeds for Heating
2, !- Number of Speeds for Cooling
No, !- Single Mode Operation
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
1, !- Heating Speed 1 Supply Air Flow Ratio
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
1, !- Heating Speed 2 Supply Air Flow Ratio
1; !- Cooling Speed 2 Supply Air Flow Ratio
Fan:SystemModel,
PSZ-AC_1:1_addAQ_Unitary_Package_fan, !- Name
Type1_FAN_SCH, !- Availability Schedule Name
PSZ-AC_1:1_OA-PSZ-AC_1:1_Unitary_PackageNode, !- Air Inlet Node Name
PSZ-AC_1:1_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name
AUTOSIZE, !- Design Maximum Air Flow Rate
Discrete, !- Speed Control Method
1, !- Electric Power Minimum Flow Rate Fraction
622.5, !- Design Pressure Rise {Pa}
0.895, !- Motor Efficiency
1.0, ! Motor In Air Stream Fraction
AUTOSIZE, !- Design Electric Power Consumption
TotalEfficiencyAndPressure, !- Design Power Sizing Method
, !- Electric Power Per Unit Flow Rate
, !- Electric Power Per Unit Flow Rate Per Pressure
0.58175, !- Fan Total Efficiency
, !- Electric Power Function of Flow Fraction Curve Name
622.5, !- Night Ventilation Mode Pressure Rise
1.0, !- Night Ventilation Mode Flow Fraction
, !- Motor Loss Zone Name
, !- Motor Loss Radiative Fraction
General, !- End-Use Subcategory
2, !- Number of Speeds
0.66, !- Speed Flow Fraction
0.4, !- Electric Power Fraction
1, !- Speed Flow Fraction
1; !- Electric Power Fraction
Coil:Heating:Fuel,
PSZ-AC_1:1_Unitary_Package_HeatCoil, !- Name
ALWAYS_ON, !- Availability Schedule Name
NaturalGas, !- Fuel Type
0.81, !- Burner Efficiency
AUTOSIZE, !- Nominal Capacity {W}
PSZ-AC_1:1_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name
PSZ-AC_1:1_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name
; !- Temperature Setpoint Node Name
Coil:Cooling:DX:MultiSpeed,
PSZ-AC_1:1_Unitary_Package_CoolCoil, !- Name
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC_1:1_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name
PSZ-AC_1:1 Supply Equipment Outlet Node, !- Air Outlet Node Name
, !- Condenser Air Inlet Node Name
AirCooled, !- Condenser Type
, !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C}
, !- Supply Water Storage Tank Name
, !- Condensate Collection Water Storage Tank Name
No, !- Apply Part Load Fraction to Speeds Greater than 1
No, !- Apply Latent Degradation to Speeds Greater than 1
, !- Crankcase Heater Capacity {W}
10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C}
, !- Basin Heater Capacity {W/K}
2, !- Basin Heater Setpoint Temperature {C}
, !- Basin Heater Operating Schedule Name
Electricity, !- Fuel Type
2, !- Number of Speeds
18857.83, !- Speed 1 Gross Rated Total Cooling Capacity {W}
0.68914, !- Speed 1 Gross Rated Sensible Heat Ratio
3.7988306741603, !- Speed 1 Gross Rated Cooling COP {W/W}
1.06646666666667, !- Speed 1 Rated Air Flow Rate {m3/s}
0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 1 Total Cooling Capacity Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 1 Total Cooling Capacity Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 1 Energy Input Ratio Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 1 Energy Input Ratio Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 1 Part Load Fraction Correlation Curve Name
, !- Speed 1 Nominal Time for Condensate Removal to Begin {s}
, !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless}
, !- Speed 1 Maximum Cycling Rate {cycles/hr}
, !- Speed 1 Latent Capacity Time Constant {s}
0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless}
, !- Speed 1 Waste Heat Function of Temperature Curve Name
0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless}
, !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s}
, !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W}
37715.66, !- Speed 2 Gross Rated Total Cooling Capacity {W}
0.68914, !- Speed 2 Gross Rated Sensible Heat Ratio
3.7988306741603, !- Speed 2 Gross Rated Cooling COP {W/W}
1.59970, !- Speed 2 Rated Air Flow Rate {m3/s}
0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 2 Total Cooling Capacity Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 2 Total Cooling Capacity Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 2 Energy Input Ratio Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 2 Energy Input Ratio Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 2 Part Load Fraction Correlation Curve Name
, !- Speed 2 Nominal Time for Condensate Removal to Begin {s}
, !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless}
, !- Speed 2 Maximum Cycling Rate {cycles/hr}
, !- Speed 2 Latent Capacity Time Constant {s}
0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless}
, !- Speed 2 Waste Heat Function of Temperature Curve Name
0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless}
, !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s}
; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W}
Curve:Biquadratic,
PSZ-AC_Unitary_PackagecoolCapFT, !- Name
0.766956, !- Coefficient1 Constant
0.0107756, !- Coefficient2 x
-0.0000414703, !- Coefficient3 x**2
0.00134961, !- Coefficient4 y
-0.000261144, !- Coefficient5 y**2
0.000457488, !- Coefficient6 x*y
12.77778, !- Minimum Value of x
23.88889, !- Maximum Value of x
21.11111, !- Minimum Value of y
46.11111; !- Maximum Value of y
Curve:Biquadratic,
PSZ-AC_Unitary_PackagecoolEIRFT, !- Name
0.297145, !- Coefficient1 Constant
0.0430933, !- Coefficient2 x
-0.000748766, !- Coefficient3 x**2
0.00597727, !- Coefficient4 y
0.000482112, !- Coefficient5 y**2
-0.000956448, !- Coefficient6 x*y
12.77778, !- Minimum Value of x
23.88889, !- Maximum Value of x
21.11111, !- Minimum Value of y
46.11111; !- Maximum Value of y
Curve:Quadratic,
PSZ-AC_Unitary_PackagecoolFFF, !- Name
0.8, !- Coefficient1 Constant
0.2, !- Coefficient2 x
0.0, !- Coefficient3 x**2
0.5, !- Minimum Value of x
1.5; !- Maximum Value of x
Curve:Quadratic,
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Name
1.156, !- Coefficient1 Constant
-0.1816, !- Coefficient2 x
0.0256, !- Coefficient3 x**2
0.5, !- Minimum Value of x
1.5; !- Maximum Value of x
Curve:Quadratic,
PSZ-AC_Unitary_PackagecoolPLR, !- Name
0.75, !- Coefficient1 Constant
0.25, !- Coefficient2 x
0.0, !- Coefficient3 x**2
0.0, !- Minimum Value of x
1.0; !- Maximum Value of x
AirLoopHVAC:SupplyPath,
PSZ-AC_1:1, !- Name
PSZ-AC_1:1 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
PSZ-AC_1:1 Supply Air Splitter; !- Component 1 Name
AirLoopHVAC:ZoneSplitter,
PSZ-AC_1:1 Supply Air Splitter, !- Name
PSZ-AC_1:1 Zone Equipment Inlet Node, !- Inlet Node Name
LGstore1 Direct Air Inlet Node Name; !- Outlet 1 Node Name
AirLoopHVAC:ReturnPath,
PSZ-AC_1:1 Return Air Path, !- Name
PSZ-AC_1:1 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
PSZ-AC_1:1 Return Air Mixer; !- Component 1 Name
AirLoopHVAC:ZoneMixer,
PSZ-AC_1:1 Return Air Mixer, !- Name
PSZ-AC_1:1 Zone Equipment Outlet Node, !- Outlet Node Name
LGstore1 Return Air Node Name; !- Inlet 1 Node Name
AirLoopHVAC,
PSZ-AC_2:2, !- Name
, !- Controller List Name
PSZ-AC_2:2 Availability Manager List, !- Availability Manager List Name
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
PSZ-AC_2:2 Air Loop Branches, !- Branch List Name
, !- Connector List Name
PSZ-AC_2:2 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
PSZ-AC_2:2 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
PSZ-AC_2:2 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
PSZ-AC_2:2 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
Sizing:System,
PSZ-AC_2:2, !- AirLoop Name
Sensible, !- Type of Load to Size On
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
1.0000, !- Central Heating Maximum System Air Flow Ratio
7.0, !- Preheat Design Temperature {C}
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Precool Design Temperature {C}
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Central Cooling Design Supply Air Temperature {C}
40.0, !- Central Heating Design Supply Air Temperature {C}
Coincident, !- Type of Zone Sum to Use
No, !- 100% Outdoor Air in Cooling
No, !- 100% Outdoor Air in Heating
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
DesignDay, !- Cooling Supply Air Flow Rate Method
0.0, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
DesignDay, !- Heating Supply Air Flow Rate Method
0.0, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
ZoneSum, !- System Outdoor Air Method
1.0, !- Zone Maximum Outdoor Air Fraction
CoolingDesignCapacity, !- Cooling Design Capacity Method
autosize, !- Cooling Design Capacity {W}
, !- Cooling Design Capacity Per Floor Area {W/m2}
, !- Fraction of Autosized Cooling Design Capacity
HeatingDesignCapacity, !- Heating Design Capacity Method
autosize, !- Heating Design Capacity {W}
, !- Heating Design Capacity Per Floor Area {W/m2}
, !- Fraction of Autosized Heating Design Capacity
OnOff; !- Central Cooling Capacity Control Method
AvailabilityManagerAssignmentList,
PSZ-AC_2:2 Availability Manager List, !- Name
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
PSZ-AC_2:2 Availability Manager; !- Availability Manager 1 Name
AvailabilityManager:NightCycle,
PSZ-AC_2:2 Availability Manager, !- Name
Always_On, !- Applicability Schedule Name
Type1_FAN_SCH, !- Fan Schedule Name
CycleOnAny, !- Control Type
1.0, !- Thermostat Tolerance {deltaC}
FixedRunTime, !- Cycling Run Time Control Type
1800; !- Cycling Run Time {s}
BranchList,
PSZ-AC_2:2 Air Loop Branches, !- Name
PSZ-AC_2:2 Air Loop Main Branch; !- Branch 1 Name
Branch,
PSZ-AC_2:2 Air Loop Main Branch, !- Name
, !- Pressure Drop Curve Name
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
PSZ-AC_2:2_OA, !- Component 1 Name
PSZ-AC_2:2 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
PSZ-AC_2:2_OA-PSZ-AC_2:2_Unitary_PackageNode, !- Component 1 Outlet Node Name
AirLoopHVAC:UnitarySystem, !- Component 2 Object Type
PSZ-AC_2:2_Unitary_Package_DX, !- Component 2 Name
PSZ-AC_2:2_OA-PSZ-AC_2:2_Unitary_PackageNode, !- Component 2 Inlet Node Name
PSZ-AC_2:2 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name
AirLoopHVAC:ControllerList,
PSZ-AC_2:2_OA_Controllers, !- Name
Controller:OutdoorAir, !- Controller 1 Object Type
PSZ-AC_2:2_OA_Controller;!- Controller 1 Name
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
PSZ-AC_2:2_OA_Equipment, !- Name
OutdoorAir:Mixer, !- Component 1 Object Type
PSZ-AC_2:2_OAMixing Box; !- Component 1 Name
AirLoopHVAC:OutdoorAirSystem,
PSZ-AC_2:2_OA, !- Name
PSZ-AC_2:2_OA_Controllers, !- Controller List Name
PSZ-AC_2:2_OA_Equipment, !- Outdoor Air Equipment List Name
PSZ-AC_2:2 Availability Manager List; !- Availability Manager List Name
OutdoorAir:NodeList,
PSZ-AC_2:2_OANode List; !- Node or NodeList Name 1
NodeList,
PSZ-AC_2:2_OANode List, !- Name
PSZ-AC_2:2_OAInlet Node; !- Node 1 Name
OutdoorAir:Mixer,
PSZ-AC_2:2_OAMixing Box, !- Name
PSZ-AC_2:2_OA-PSZ-AC_2:2_Unitary_PackageNode, !- Mixed Air Node Name
PSZ-AC_2:2_OAInlet Node, !- Outdoor Air Stream Node Name
PSZ-AC_2:2_OARelief Node,!- Relief Air Stream Node Name
PSZ-AC_2:2 Supply Equipment Inlet Node; !- Return Air Stream Node Name
SetpointManager:MixedAir,
PSZ-AC_2:2_OAMixed Air Temp Manager, !- Name
Temperature, !- Control Variable
PSZ-AC_2:2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
PSZ-AC_2:2_OA-PSZ-AC_2:2_Unitary_PackageNode, !- Fan Inlet Node Name
PSZ-AC_2:2_Unitary_PackageHeatCoil air inlet, !- Fan Outlet Node Name
PSZ-AC_2:2_OA-PSZ-AC_2:2_Unitary_PackageNode; !- Setpoint Node or NodeList Name
Controller:OutdoorAir,
PSZ-AC_2:2_OA_Controller,!- Name
PSZ-AC_2:2_OARelief Node,!- Relief Air Outlet Node Name
PSZ-AC_2:2 Supply Equipment Inlet Node, !- Return Air Node Name
PSZ-AC_2:2_OA-PSZ-AC_2:2_Unitary_PackageNode, !- Mixed Air Node Name
PSZ-AC_2:2_OAInlet Node, !- Actuator Node Name
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
DifferentialDryBulb, !- Economizer Control Type
ModulateFlow, !- Economizer Control Action Type
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
, !- Economizer Maximum Limit Dewpoint Temperature {C}
, !- Electronic Enthalpy Limit Curve Name
0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
LockoutWithHeating, !- Lockout Type
FixedMinimum, !- Minimum Limit Type
Type1_MinOA_MotorizedDamper_SCH, !- Minimum Outdoor Air Schedule Name
, !- Minimum Fraction of Outdoor Air Schedule Name
SZ_system_OA_Max_Frac_SCH; !- Maximum Fraction of Outdoor Air Schedule Name
AirLoopHVAC:UnitarySystem,
PSZ-AC_2:2_Unitary_Package_DX, !- Name
Load, !- Control Type
SMstore1, !- Controlling Zone or Thermostat Location
None, !- Dehumidification Control Type
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC_2:2_OA-PSZ-AC_2:2_Unitary_PackageNode, !- Air Inlet Node Name
PSZ-AC_2:2 Supply Equipment Outlet Node, !- Air Outlet Node Name
Fan:SystemModel, !- Supply Fan Object Type
PSZ-AC_2:2_addAQ_Unitary_Package_fan, !- Supply Fan Name
BlowThrough, !- Fan Placement
Type2_FAN_SCH, !- Supply Air Fan Operating Mode Schedule Name
Coil:Heating:Fuel, !- Heating Coil Object Type
PSZ-AC_2:2_Unitary_Package_HeatCoil, !- Heating Coil Name
1, !- DX Heating Coil Sizing Ratio
Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type
PSZ-AC_2:2_Unitary_Package_CoolCoil, !- Cooling Coil Name
No, !- Use DOAS DX Cooling Coil
2, !- Minimum Supply Air Temperature {C}
SensibleOnlyLoadControl, !- Latent Load Control
, !- Supplemental Heating Coil Object Type
, !- Supplemental Heating Coil Name
SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method
AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method
AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method
AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s}
, !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- No Load Fraction of Autosized Cooling Supply Air Flow Rate
, !- No Load Fraction of Autosized Heating Supply Air Flow Rate
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W}
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W}
AUTOSIZE, !- Maximum Supply Air Temperature {C}
, !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C}
, !- Outdoor Dry-Bulb Temperature Sensor Node Name
, !- Maximum Cycling Rate {cycles/hr}
, !- Heat Pump Time Constant {s}
, !- Fraction of On-Cycle Power Use
, !- Heat Pump Fan Delay Time {s}
, !- Ancillary On-Cycle Electric Power {W}
, !- Ancillary Off-Cycle Electric Power {W}
, !- Design Heat Recovery Water Flow Rate {m3/s}
, !- Maximum Temperature for Heat Recovery {C}
, !- Heat Recovery Water Inlet Node Name
, !- Heat Recovery Water Outlet Node Name
UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type
PSZ-AC_2:2_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name
UnitarySystemPerformance:Multispeed,
PSZ-AC_2:2_Unitary_Package_DX_Perf, !- Name
2, !- Number of Speeds for Heating
2, !- Number of Speeds for Cooling
No, !- Single Mode Operation
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
1, !- Heating Speed 1 Supply Air Flow Ratio
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
1, !- Heating Speed 2 Supply Air Flow Ratio
1; !- Cooling Speed 2 Supply Air Flow Ratio
Fan:SystemModel,
PSZ-AC_2:2_addAQ_Unitary_Package_fan, !- Name
Type1_FAN_SCH, !- Availability Schedule Name
PSZ-AC_2:2_OA-PSZ-AC_2:2_Unitary_PackageNode, !- Air Inlet Node Name
PSZ-AC_2:2_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name
AUTOSIZE, !- Design Maximum Air Flow Rate
Discrete, !- Speed Control Method
1, !- Electric Power Minimum Flow Rate Fraction
622.5, !- Design Pressure Rise {Pa}
0.865, !- Motor Efficiency
1.0, ! Motor In Air Stream Fraction
AUTOSIZE, !- Design Electric Power Consumption
TotalEfficiencyAndPressure, !- Design Power Sizing Method
, !- Electric Power Per Unit Flow Rate
, !- Electric Power Per Unit Flow Rate Per Pressure
0.56225, !- Fan Total Efficiency
, !- Electric Power Function of Flow Fraction Curve Name
622.5, !- Night Ventilation Mode Pressure Rise
, !- Night Ventilation Mode Flow Fraction
, !- Motor Loss Zone Name
, !- Motor Loss Radiative Fraction
General, !- End-Use Subcategory
2, !- Number of Speeds
0.66, !- Speed Flow Fraction
0.4, !- Electric Power Fraction
1, !- Speed Flow Fraction
1; !- Electric Power Fraction
Coil:Heating:Fuel,
PSZ-AC_2:2_Unitary_Package_HeatCoil, !- Name
ALWAYS_ON, !- Availability Schedule Name
NaturalGas, !- Fuel Type
0.81, !- Burner Efficiency
AUTOSIZE, !- Nominal Capacity {W}
PSZ-AC_2:2_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name
PSZ-AC_2:2_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name
; !- Temperature Setpoint Node Name
Coil:Cooling:DX:MultiSpeed,
PSZ-AC_2:2_Unitary_Package_CoolCoil, !- Name
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC_2:2_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name
PSZ-AC_2:2 Supply Equipment Outlet Node, !- Air Outlet Node Name
, !- Condenser Air Inlet Node Name
AirCooled, !- Condenser Type
, !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C}
, !- Supply Water Storage Tank Name
, !- Condensate Collection Water Storage Tank Name
No, !- Apply Part Load Fraction to Speeds Greater than 1
No, !- Apply Latent Degradation to Speeds Greater than 1
, !- Crankcase Heater Capacity {W}
10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C}
, !- Basin Heater Capacity {W/K}
2, !- Basin Heater Setpoint Temperature {C}
, !- Basin Heater Operating Schedule Name
Electricity, !- Fuel Type
2, !- Number of Speeds
10320.04, !- Speed 1 Gross Rated Total Cooling Capacity {W}
0.69656, !- Speed 1 Gross Rated Sensible Heat Ratio
3.7988306741603, !- Speed 1 Gross Rated Cooling COP {W/W}
0.60042, !- Speed 1 Rated Air Flow Rate {m3/s}
0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 1 Total Cooling Capacity Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 1 Total Cooling Capacity Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 1 Energy Input Ratio Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 1 Energy Input Ratio Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 1 Part Load Fraction Correlation Curve Name
, !- Speed 1 Nominal Time for Condensate Removal to Begin {s}
, !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless}
, !- Speed 1 Maximum Cycling Rate {cycles/hr}
, !- Speed 1 Latent Capacity Time Constant {s}
0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless}
, !- Speed 1 Waste Heat Function of Temperature Curve Name
0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless}
, !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s}
, !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W}
20640.08, !- Speed 2 Gross Rated Total Cooling Capacity {W}
0.69656, !- Speed 2 Gross Rated Sensible Heat Ratio
3.7988306741603, !- Speed 2 Gross Rated Cooling COP {W/W}
0.90063, !- Speed 2 Rated Air Flow Rate {m3/s}
0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 2 Total Cooling Capacity Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 2 Total Cooling Capacity Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 2 Energy Input Ratio Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 2 Energy Input Ratio Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 2 Part Load Fraction Correlation Curve Name
, !- Speed 2 Nominal Time for Condensate Removal to Begin {s}
, !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless}
, !- Speed 2 Maximum Cycling Rate {cycles/hr}
, !- Speed 2 Latent Capacity Time Constant {s}
0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless}
, !- Speed 2 Waste Heat Function of Temperature Curve Name
0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless}
, !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s}
; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W}
AirLoopHVAC:SupplyPath,
PSZ-AC_2:2, !- Name
PSZ-AC_2:2 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
PSZ-AC_2:2 Supply Air Splitter; !- Component 1 Name
AirLoopHVAC:ZoneSplitter,
PSZ-AC_2:2 Supply Air Splitter, !- Name
PSZ-AC_2:2 Zone Equipment Inlet Node, !- Inlet Node Name
SMstore1 Direct Air Inlet Node Name; !- Outlet 1 Node Name
AirLoopHVAC:ReturnPath,
PSZ-AC_2:2 Return Air Path, !- Name
PSZ-AC_2:2 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
PSZ-AC_2:2 Return Air Mixer; !- Component 1 Name
AirLoopHVAC:ZoneMixer,
PSZ-AC_2:2 Return Air Mixer, !- Name
PSZ-AC_2:2 Zone Equipment Outlet Node, !- Outlet Node Name
SMstore1 Return Air Node Name; !- Inlet 1 Node Name
AirLoopHVAC,
PSZ-AC_3:3, !- Name
, !- Controller List Name
PSZ-AC_3:3 Availability Manager List, !- Availability Manager List Name
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
PSZ-AC_3:3 Air Loop Branches, !- Branch List Name
, !- Connector List Name
PSZ-AC_3:3 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
PSZ-AC_3:3 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
PSZ-AC_3:3 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
PSZ-AC_3:3 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
Sizing:System,
PSZ-AC_3:3, !- AirLoop Name
Sensible, !- Type of Load to Size On
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
1.0000, !- Central Heating Maximum System Air Flow Ratio
7.0, !- Preheat Design Temperature {C}
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Precool Design Temperature {C}
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Central Cooling Design Supply Air Temperature {C}
40.0, !- Central Heating Design Supply Air Temperature {C}
Coincident, !- Type of Zone Sum to Use
No, !- 100% Outdoor Air in Cooling
No, !- 100% Outdoor Air in Heating
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
DesignDay, !- Cooling Supply Air Flow Rate Method
0.0, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
DesignDay, !- Heating Supply Air Flow Rate Method
0.0, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
ZoneSum, !- System Outdoor Air Method
1.0, !- Zone Maximum Outdoor Air Fraction
CoolingDesignCapacity, !- Cooling Design Capacity Method
autosize, !- Cooling Design Capacity {W}
, !- Cooling Design Capacity Per Floor Area {W/m2}
, !- Fraction of Autosized Cooling Design Capacity
HeatingDesignCapacity, !- Heating Design Capacity Method
autosize, !- Heating Design Capacity {W}
, !- Heating Design Capacity Per Floor Area {W/m2}
, !- Fraction of Autosized Heating Design Capacity
OnOff; !- Central Cooling Capacity Control Method
AvailabilityManagerAssignmentList,
PSZ-AC_3:3 Availability Manager List, !- Name
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
PSZ-AC_3:3 Availability Manager; !- Availability Manager 1 Name
AvailabilityManager:NightCycle,
PSZ-AC_3:3 Availability Manager, !- Name
Always_On, !- Applicability Schedule Name
Type2_FAN_SCH, !- Fan Schedule Name
CycleOnAny, !- Control Type
1.0, !- Thermostat Tolerance {deltaC}
FixedRunTime, !- Cycling Run Time Control Type
1800; !- Cycling Run Time {s}
BranchList,
PSZ-AC_3:3 Air Loop Branches, !- Name
PSZ-AC_3:3 Air Loop Main Branch; !- Branch 1 Name
Branch,
PSZ-AC_3:3 Air Loop Main Branch, !- Name
, !- Pressure Drop Curve Name
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
PSZ-AC_3:3_OA, !- Component 1 Name
PSZ-AC_3:3 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
PSZ-AC_3:3_OA-PSZ-AC_3:3_Unitary_PackageNode, !- Component 1 Outlet Node Name
AirLoopHVAC:UnitarySystem, !- Component 2 Object Type
PSZ-AC_3:3_Unitary_Package_DX, !- Component 2 Name
PSZ-AC_3:3_OA-PSZ-AC_3:3_Unitary_PackageNode, !- Component 2 Inlet Node Name
PSZ-AC_3:3 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name
AirLoopHVAC:ControllerList,
PSZ-AC_3:3_OA_Controllers, !- Name
Controller:OutdoorAir, !- Controller 1 Object Type
PSZ-AC_3:3_OA_Controller;!- Controller 1 Name
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
PSZ-AC_3:3_OA_Equipment, !- Name
OutdoorAir:Mixer, !- Component 1 Object Type
PSZ-AC_3:3_OAMixing Box; !- Component 1 Name
AirLoopHVAC:OutdoorAirSystem,
PSZ-AC_3:3_OA, !- Name
PSZ-AC_3:3_OA_Controllers, !- Controller List Name
PSZ-AC_3:3_OA_Equipment, !- Outdoor Air Equipment List Name
PSZ-AC_3:3 Availability Manager List; !- Availability Manager List Name
OutdoorAir:NodeList,
PSZ-AC_3:3_OANode List; !- Node or NodeList Name 1
NodeList,
PSZ-AC_3:3_OANode List, !- Name
PSZ-AC_3:3_OAInlet Node; !- Node 1 Name
OutdoorAir:Mixer,
PSZ-AC_3:3_OAMixing Box, !- Name
PSZ-AC_3:3_OA-PSZ-AC_3:3_Unitary_PackageNode, !- Mixed Air Node Name
PSZ-AC_3:3_OAInlet Node, !- Outdoor Air Stream Node Name
PSZ-AC_3:3_OARelief Node,!- Relief Air Stream Node Name
PSZ-AC_3:3 Supply Equipment Inlet Node; !- Return Air Stream Node Name
SetpointManager:MixedAir,
PSZ-AC_3:3_OAMixed Air Temp Manager, !- Name
Temperature, !- Control Variable
PSZ-AC_3:3 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
PSZ-AC_3:3_OA-PSZ-AC_3:3_Unitary_PackageNode, !- Fan Inlet Node Name
PSZ-AC_3:3_Unitary_PackageHeatCoil air inlet, !- Fan Outlet Node Name
PSZ-AC_3:3_OA-PSZ-AC_3:3_Unitary_PackageNode; !- Setpoint Node or NodeList Name
Controller:OutdoorAir,
PSZ-AC_3:3_OA_Controller,!- Name
PSZ-AC_3:3_OARelief Node,!- Relief Air Outlet Node Name
PSZ-AC_3:3 Supply Equipment Inlet Node, !- Return Air Node Name
PSZ-AC_3:3_OA-PSZ-AC_3:3_Unitary_PackageNode, !- Mixed Air Node Name
PSZ-AC_3:3_OAInlet Node, !- Actuator Node Name
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
DifferentialDryBulb, !- Economizer Control Type
ModulateFlow, !- Economizer Control Action Type
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
, !- Economizer Maximum Limit Dewpoint Temperature {C}
, !- Electronic Enthalpy Limit Curve Name
0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
LockoutWithHeating, !- Lockout Type
FixedMinimum, !- Minimum Limit Type
Type2_MinOA_MotorizedDamper_SCH, !- Minimum Outdoor Air Schedule Name
, !- Minimum Fraction of Outdoor Air Schedule Name
SZ_system_OA_Max_Frac_SCH; !- Maximum Fraction of Outdoor Air Schedule Name
AirLoopHVAC:UnitarySystem,
PSZ-AC_3:3_Unitary_Package_DX, !- Name
Load, !- Control Type
SMstore2, !- Controlling Zone or Thermostat Location
None, !- Dehumidification Control Type
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC_3:3_OA-PSZ-AC_3:3_Unitary_PackageNode, !- Air Inlet Node Name
PSZ-AC_3:3 Supply Equipment Outlet Node, !- Air Outlet Node Name
Fan:SystemModel, !- Supply Fan Object Type
PSZ-AC_3:3_addAQ_Unitary_Package_fan, !- Supply Fan Name
BlowThrough, !- Fan Placement
Type2_FAN_SCH, !- Supply Air Fan Operating Mode Schedule Name
Coil:Heating:Fuel, !- Heating Coil Object Type
PSZ-AC_3:3_Unitary_Package_HeatCoil, !- Heating Coil Name
1, !- DX Heating Coil Sizing Ratio
Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type
PSZ-AC_3:3_Unitary_Package_CoolCoil, !- Cooling Coil Name
No, !- Use DOAS DX Cooling Coil
2, !- Minimum Supply Air Temperature {C}
SensibleOnlyLoadControl, !- Latent Load Control
, !- Supplemental Heating Coil Object Type
, !- Supplemental Heating Coil Name
SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method
AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method
AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method
AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s}
, !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- No Load Fraction of Autosized Cooling Supply Air Flow Rate
, !- No Load Fraction of Autosized Heating Supply Air Flow Rate
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W}
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W}
AUTOSIZE, !- Maximum Supply Air Temperature {C}
, !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C}
, !- Outdoor Dry-Bulb Temperature Sensor Node Name
, !- Maximum Cycling Rate {cycles/hr}
, !- Heat Pump Time Constant {s}
, !- Fraction of On-Cycle Power Use
, !- Heat Pump Fan Delay Time {s}
, !- Ancillary On-Cycle Electric Power {W}
, !- Ancillary Off-Cycle Electric Power {W}
, !- Design Heat Recovery Water Flow Rate {m3/s}
, !- Maximum Temperature for Heat Recovery {C}
, !- Heat Recovery Water Inlet Node Name
, !- Heat Recovery Water Outlet Node Name
UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type
PSZ-AC_3:3_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name
UnitarySystemPerformance:Multispeed,
PSZ-AC_3:3_Unitary_Package_DX_Perf, !- Name
2, !- Number of Speeds for Heating
2, !- Number of Speeds for Cooling
No, !- Single Mode Operation
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
1, !- Heating Speed 1 Supply Air Flow Ratio
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
1, !- Heating Speed 2 Supply Air Flow Ratio
1; !- Cooling Speed 2 Supply Air Flow Ratio
Fan:SystemModel,
PSZ-AC_3:3_addAQ_Unitary_Package_fan, !- Name
Type2_FAN_SCH, !- Availability Schedule Name
PSZ-AC_3:3_OA-PSZ-AC_3:3_Unitary_PackageNode, !- Air Inlet Node Name
PSZ-AC_3:3_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name
AUTOSIZE, !- Design Maximum Air Flow Rate
Discrete, !- Speed Control Method
1, !- Electric Power Minimum Flow Rate Fraction
622.5, !- Design Pressure Rise {Pa}
0.865, !- Motor Efficiency
1.0, ! Motor In Air Stream Fraction
AUTOSIZE, !- Design Electric Power Consumption
TotalEfficiencyAndPressure, !- Design Power Sizing Method
, !- Electric Power Per Unit Flow Rate
, !- Electric Power Per Unit Flow Rate Per Pressure
0.56225, !- Fan Total Efficiency
, !- Electric Power Function of Flow Fraction Curve Name
622.5, !- Night Ventilation Mode Pressure Rise
, !- Night Ventilation Mode Flow Fraction
, !- Motor Loss Zone Name
, !- Motor Loss Radiative Fraction
General, !- End-Use Subcategory
2, !- Number of Speeds
0.66, !- Speed Flow Fraction
0.4, !- Electric Power Fraction
1, !- Speed Flow Fraction
1; !- Electric Power Fraction
Coil:Heating:Fuel,
PSZ-AC_3:3_Unitary_Package_HeatCoil, !- Name
ALWAYS_ON, !- Availability Schedule Name
NaturalGas, !- Fuel Type
0.81, !- Burner Efficiency
AUTOSIZE, !- Nominal Capacity {W}
PSZ-AC_3:3_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name
PSZ-AC_3:3_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name
; !- Temperature Setpoint Node Name
Coil:Cooling:DX:MultiSpeed,
PSZ-AC_3:3_Unitary_Package_CoolCoil, !- Name
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC_3:3_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name
PSZ-AC_3:3 Supply Equipment Outlet Node, !- Air Outlet Node Name
, !- Condenser Air Inlet Node Name
AirCooled, !- Condenser Type
, !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C}
, !- Supply Water Storage Tank Name
, !- Condensate Collection Water Storage Tank Name
No, !- Apply Part Load Fraction to Speeds Greater than 1
No, !- Apply Latent Degradation to Speeds Greater than 1
, !- Crankcase Heater Capacity {W}
10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C}
, !- Basin Heater Capacity {W/K}
2, !- Basin Heater Setpoint Temperature {C}
, !- Basin Heater Operating Schedule Name
Electricity, !- Fuel Type
2, !- Number of Speeds
10292.23, !- Speed 1 Gross Rated Total Cooling Capacity {W}
0.73646, !- Speed 1 Gross Rated Sensible Heat Ratio
3.7988306741603, !- Speed 1 Gross Rated Cooling COP {W/W}
0.688773333333333, !- Speed 1 Rated Air Flow Rate {m3/s}
0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 1 Total Cooling Capacity Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 1 Total Cooling Capacity Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 1 Energy Input Ratio Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 1 Energy Input Ratio Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 1 Part Load Fraction Correlation Curve Name
, !- Speed 1 Nominal Time for Condensate Removal to Begin {s}
, !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless}
, !- Speed 1 Maximum Cycling Rate {cycles/hr}
, !- Speed 1 Latent Capacity Time Constant {s}
0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless}
, !- Speed 1 Waste Heat Function of Temperature Curve Name
0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless}
, !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s}
, !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W}
20584.46, !- Speed 2 Gross Rated Total Cooling Capacity {W}
0.73646, !- Speed 2 Gross Rated Sensible Heat Ratio
3.7988306741603, !- Speed 2 Gross Rated Cooling COP {W/W}
1.03316, !- Speed 2 Rated Air Flow Rate {m3/s}
0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 2 Total Cooling Capacity Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 2 Total Cooling Capacity Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 2 Energy Input Ratio Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 2 Energy Input Ratio Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 2 Part Load Fraction Correlation Curve Name
, !- Speed 2 Nominal Time for Condensate Removal to Begin {s}
, !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless}
, !- Speed 2 Maximum Cycling Rate {cycles/hr}
, !- Speed 2 Latent Capacity Time Constant {s}
0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless}
, !- Speed 2 Waste Heat Function of Temperature Curve Name
0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless}
, !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s}
; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W}
AirLoopHVAC:SupplyPath,
PSZ-AC_3:3, !- Name
PSZ-AC_3:3 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
PSZ-AC_3:3 Supply Air Splitter; !- Component 1 Name
AirLoopHVAC:ZoneSplitter,
PSZ-AC_3:3 Supply Air Splitter, !- Name
PSZ-AC_3:3 Zone Equipment Inlet Node, !- Inlet Node Name
SMstore2 Direct Air Inlet Node Name; !- Outlet 1 Node Name
AirLoopHVAC:ReturnPath,
PSZ-AC_3:3 Return Air Path, !- Name
PSZ-AC_3:3 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
PSZ-AC_3:3 Return Air Mixer; !- Component 1 Name
AirLoopHVAC:ZoneMixer,
PSZ-AC_3:3 Return Air Mixer, !- Name
PSZ-AC_3:3 Zone Equipment Outlet Node, !- Outlet Node Name
SMstore2 Return Air Node Name; !- Inlet 1 Node Name
AirLoopHVAC,
PSZ-AC_4:4, !- Name
, !- Controller List Name
PSZ-AC_4:4 Availability Manager List, !- Availability Manager List Name
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
PSZ-AC_4:4 Air Loop Branches, !- Branch List Name
, !- Connector List Name
PSZ-AC_4:4 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
PSZ-AC_4:4 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
PSZ-AC_4:4 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
PSZ-AC_4:4 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
Sizing:System,
PSZ-AC_4:4, !- AirLoop Name
Sensible, !- Type of Load to Size On
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
1.0000, !- Central Heating Maximum System Air Flow Ratio
7.0, !- Preheat Design Temperature {C}
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Precool Design Temperature {C}
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Central Cooling Design Supply Air Temperature {C}
40.0, !- Central Heating Design Supply Air Temperature {C}
Coincident, !- Type of Zone Sum to Use
No, !- 100% Outdoor Air in Cooling
No, !- 100% Outdoor Air in Heating
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
DesignDay, !- Cooling Supply Air Flow Rate Method
0.0, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
DesignDay, !- Heating Supply Air Flow Rate Method
0.0, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
ZoneSum, !- System Outdoor Air Method
1.0, !- Zone Maximum Outdoor Air Fraction
CoolingDesignCapacity, !- Cooling Design Capacity Method
autosize, !- Cooling Design Capacity {W}
, !- Cooling Design Capacity Per Floor Area {W/m2}
, !- Fraction of Autosized Cooling Design Capacity
HeatingDesignCapacity, !- Heating Design Capacity Method
autosize, !- Heating Design Capacity {W}
, !- Heating Design Capacity Per Floor Area {W/m2}
, !- Fraction of Autosized Heating Design Capacity
OnOff; !- Central Cooling Capacity Control Method
AvailabilityManagerAssignmentList,
PSZ-AC_4:4 Availability Manager List, !- Name
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
PSZ-AC_4:4 Availability Manager; !- Availability Manager 1 Name
AvailabilityManager:NightCycle,
PSZ-AC_4:4 Availability Manager, !- Name
Always_On, !- Applicability Schedule Name
Type2_FAN_SCH, !- Fan Schedule Name
CycleOnAny, !- Control Type
1.0, !- Thermostat Tolerance {deltaC}
FixedRunTime, !- Cycling Run Time Control Type
1800; !- Cycling Run Time {s}
BranchList,
PSZ-AC_4:4 Air Loop Branches, !- Name
PSZ-AC_4:4 Air Loop Main Branch; !- Branch 1 Name
Branch,
PSZ-AC_4:4 Air Loop Main Branch, !- Name
, !- Pressure Drop Curve Name
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
PSZ-AC_4:4_OA, !- Component 1 Name
PSZ-AC_4:4 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
PSZ-AC_4:4_OA-PSZ-AC_4:4_Unitary_PackageNode, !- Component 1 Outlet Node Name
AirLoopHVAC:UnitarySystem, !- Component 2 Object Type
PSZ-AC_4:4_Unitary_Package_DX, !- Component 2 Name
PSZ-AC_4:4_OA-PSZ-AC_4:4_Unitary_PackageNode, !- Component 2 Inlet Node Name
PSZ-AC_4:4 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name
AirLoopHVAC:ControllerList,
PSZ-AC_4:4_OA_Controllers, !- Name
Controller:OutdoorAir, !- Controller 1 Object Type
PSZ-AC_4:4_OA_Controller;!- Controller 1 Name
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
PSZ-AC_4:4_OA_Equipment, !- Name
OutdoorAir:Mixer, !- Component 1 Object Type
PSZ-AC_4:4_OAMixing Box; !- Component 1 Name
AirLoopHVAC:OutdoorAirSystem,
PSZ-AC_4:4_OA, !- Name
PSZ-AC_4:4_OA_Controllers, !- Controller List Name
PSZ-AC_4:4_OA_Equipment, !- Outdoor Air Equipment List Name
PSZ-AC_4:4 Availability Manager List; !- Availability Manager List Name
OutdoorAir:NodeList,
PSZ-AC_4:4_OANode List; !- Node or NodeList Name 1
NodeList,
PSZ-AC_4:4_OANode List, !- Name
PSZ-AC_4:4_OAInlet Node; !- Node 1 Name
OutdoorAir:Mixer,
PSZ-AC_4:4_OAMixing Box, !- Name
PSZ-AC_4:4_OA-PSZ-AC_4:4_Unitary_PackageNode, !- Mixed Air Node Name
PSZ-AC_4:4_OAInlet Node, !- Outdoor Air Stream Node Name
PSZ-AC_4:4_OARelief Node,!- Relief Air Stream Node Name
PSZ-AC_4:4 Supply Equipment Inlet Node; !- Return Air Stream Node Name
SetpointManager:MixedAir,
PSZ-AC_4:4_OAMixed Air Temp Manager, !- Name
Temperature, !- Control Variable
PSZ-AC_4:4 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
PSZ-AC_4:4_OA-PSZ-AC_4:4_Unitary_PackageNode, !- Fan Inlet Node Name
PSZ-AC_4:4_Unitary_PackageHeatCoil air inlet, !- Fan Outlet Node Name
PSZ-AC_4:4_OA-PSZ-AC_4:4_Unitary_PackageNode; !- Setpoint Node or NodeList Name
Controller:OutdoorAir,
PSZ-AC_4:4_OA_Controller,!- Name
PSZ-AC_4:4_OARelief Node,!- Relief Air Outlet Node Name
PSZ-AC_4:4 Supply Equipment Inlet Node, !- Return Air Node Name
PSZ-AC_4:4_OA-PSZ-AC_4:4_Unitary_PackageNode, !- Mixed Air Node Name
PSZ-AC_4:4_OAInlet Node, !- Actuator Node Name
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
DifferentialDryBulb, !- Economizer Control Type
ModulateFlow, !- Economizer Control Action Type
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
, !- Economizer Maximum Limit Dewpoint Temperature {C}
, !- Electronic Enthalpy Limit Curve Name
0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
LockoutWithHeating, !- Lockout Type
FixedMinimum, !- Minimum Limit Type
Type2_MinOA_MotorizedDamper_SCH, !- Minimum Outdoor Air Schedule Name
, !- Minimum Fraction of Outdoor Air Schedule Name
SZ_system_OA_Max_Frac_SCH; !- Maximum Fraction of Outdoor Air Schedule Name
AirLoopHVAC:UnitarySystem,
PSZ-AC_4:4_Unitary_Package_DX, !- Name
Load, !- Control Type
SMstore3, !- Controlling Zone or Thermostat Location
None, !- Dehumidification Control Type
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC_4:4_OA-PSZ-AC_4:4_Unitary_PackageNode, !- Air Inlet Node Name
PSZ-AC_4:4 Supply Equipment Outlet Node, !- Air Outlet Node Name
Fan:SystemModel, !- Supply Fan Object Type
PSZ-AC_4:4_addAQ_Unitary_Package_fan, !- Supply Fan Name
BlowThrough, !- Fan Placement
Type2_FAN_SCH, !- Supply Air Fan Operating Mode Schedule Name
Coil:Heating:Fuel, !- Heating Coil Object Type
PSZ-AC_4:4_Unitary_Package_HeatCoil, !- Heating Coil Name
1, !- DX Heating Coil Sizing Ratio
Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type
PSZ-AC_4:4_Unitary_Package_CoolCoil, !- Cooling Coil Name
No, !- Use DOAS DX Cooling Coil
2, !- Minimum Supply Air Temperature {C}
SensibleOnlyLoadControl, !- Latent Load Control
, !- Supplemental Heating Coil Object Type
, !- Supplemental Heating Coil Name
SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method
AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method
AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method
AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s}
, !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- No Load Fraction of Autosized Cooling Supply Air Flow Rate
, !- No Load Fraction of Autosized Heating Supply Air Flow Rate
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W}
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W}
AUTOSIZE, !- Maximum Supply Air Temperature {C}
, !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C}
, !- Outdoor Dry-Bulb Temperature Sensor Node Name
, !- Maximum Cycling Rate {cycles/hr}
, !- Heat Pump Time Constant {s}
, !- Fraction of On-Cycle Power Use
, !- Heat Pump Fan Delay Time {s}
, !- Ancillary On-Cycle Electric Power {W}
, !- Ancillary Off-Cycle Electric Power {W}
, !- Design Heat Recovery Water Flow Rate {m3/s}
, !- Maximum Temperature for Heat Recovery {C}
, !- Heat Recovery Water Inlet Node Name
, !- Heat Recovery Water Outlet Node Name
UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type
PSZ-AC_4:4_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name
UnitarySystemPerformance:Multispeed,
PSZ-AC_4:4_Unitary_Package_DX_Perf, !- Name
2, !- Number of Speeds for Heating
2, !- Number of Speeds for Cooling
No, !- Single Mode Operation
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
1, !- Heating Speed 1 Supply Air Flow Ratio
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
1, !- Heating Speed 2 Supply Air Flow Ratio
1; !- Cooling Speed 2 Supply Air Flow Ratio
Fan:SystemModel,
PSZ-AC_4:4_addAQ_Unitary_Package_fan, !- Name
Type2_FAN_SCH, !- Availability Schedule Name
PSZ-AC_4:4_OA-PSZ-AC_4:4_Unitary_PackageNode, !- Air Inlet Node Name
PSZ-AC_4:4_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name
AUTOSIZE, !- Design Maximum Air Flow Rate
Discrete, !- Speed Control Method
1, !- Electric Power Minimum Flow Rate Fraction
622.5, !- Design Pressure Rise {Pa}
0.865, !- Motor Efficiency
1.0, ! Motor In Air Stream Fraction
AUTOSIZE, !- Design Electric Power Consumption
TotalEfficiencyAndPressure, !- Design Power Sizing Method
, !- Electric Power Per Unit Flow Rate
, !- Electric Power Per Unit Flow Rate Per Pressure
0.56225, !- Fan Total Efficiency
, !- Electric Power Function of Flow Fraction Curve Name
622.5, !- Night Ventilation Mode Pressure Rise
, !- Night Ventilation Mode Flow Fraction
, !- Motor Loss Zone Name
, !- Motor Loss Radiative Fraction
General, !- End-Use Subcategory
2, !- Number of Speeds
0.66, !- Speed Flow Fraction
0.4, !- Electric Power Fraction
1, !- Speed Flow Fraction
1; !- Electric Power Fraction
Coil:Heating:Fuel,
PSZ-AC_4:4_Unitary_Package_HeatCoil, !- Name
ALWAYS_ON, !- Availability Schedule Name
NaturalGas, !- Fuel Type
0.81, !- Burner Efficiency
AUTOSIZE, !- Nominal Capacity {W}
PSZ-AC_4:4_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name
PSZ-AC_4:4_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name
; !- Temperature Setpoint Node Name
Coil:Cooling:DX:MultiSpeed,
PSZ-AC_4:4_Unitary_Package_CoolCoil, !- Name
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC_4:4_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name
PSZ-AC_4:4 Supply Equipment Outlet Node, !- Air Outlet Node Name
, !- Condenser Air Inlet Node Name
AirCooled, !- Condenser Type
, !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C}
, !- Supply Water Storage Tank Name
, !- Condensate Collection Water Storage Tank Name
No, !- Apply Part Load Fraction to Speeds Greater than 1
No, !- Apply Latent Degradation to Speeds Greater than 1
, !- Crankcase Heater Capacity {W}
10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C}
, !- Basin Heater Capacity {W/K}
2, !- Basin Heater Setpoint Temperature {C}
, !- Basin Heater Operating Schedule Name
Electricity, !- Fuel Type
2, !- Number of Speeds
10220.095, !- Speed 1 Gross Rated Total Cooling Capacity {W}
0.73738, !- Speed 1 Gross Rated Sensible Heat Ratio
3.7988306741603, !- Speed 1 Gross Rated Cooling COP {W/W}
0.685993333333333, !- Speed 1 Rated Air Flow Rate {m3/s}
0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 1 Total Cooling Capacity Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 1 Total Cooling Capacity Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 1 Energy Input Ratio Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 1 Energy Input Ratio Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 1 Part Load Fraction Correlation Curve Name
, !- Speed 1 Nominal Time for Condensate Removal to Begin {s}
, !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless}
, !- Speed 1 Maximum Cycling Rate {cycles/hr}
, !- Speed 1 Latent Capacity Time Constant {s}
0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless}
, !- Speed 1 Waste Heat Function of Temperature Curve Name
0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless}
, !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s}
, !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W}
20440.19, !- Speed 2 Gross Rated Total Cooling Capacity {W}
0.73738, !- Speed 2 Gross Rated Sensible Heat Ratio
3.7988306741603, !- Speed 2 Gross Rated Cooling COP {W/W}
1.02899, !- Speed 2 Rated Air Flow Rate {m3/s}
0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 2 Total Cooling Capacity Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 2 Total Cooling Capacity Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 2 Energy Input Ratio Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 2 Energy Input Ratio Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 2 Part Load Fraction Correlation Curve Name
, !- Speed 2 Nominal Time for Condensate Removal to Begin {s}
, !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless}
, !- Speed 2 Maximum Cycling Rate {cycles/hr}
, !- Speed 2 Latent Capacity Time Constant {s}
0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless}
, !- Speed 2 Waste Heat Function of Temperature Curve Name
0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless}
, !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s}
; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W}
AirLoopHVAC:SupplyPath,
PSZ-AC_4:4, !- Name
PSZ-AC_4:4 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
PSZ-AC_4:4 Supply Air Splitter; !- Component 1 Name
AirLoopHVAC:ZoneSplitter,
PSZ-AC_4:4 Supply Air Splitter, !- Name
PSZ-AC_4:4 Zone Equipment Inlet Node, !- Inlet Node Name
SMstore3 Direct Air Inlet Node Name; !- Outlet 1 Node Name
AirLoopHVAC:ReturnPath,
PSZ-AC_4:4 Return Air Path, !- Name
PSZ-AC_4:4 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
PSZ-AC_4:4 Return Air Mixer; !- Component 1 Name
AirLoopHVAC:ZoneMixer,
PSZ-AC_4:4 Return Air Mixer, !- Name
PSZ-AC_4:4 Zone Equipment Outlet Node, !- Outlet Node Name
SMstore3 Return Air Node Name; !- Inlet 1 Node Name
AirLoopHVAC,
PSZ-AC_5:5, !- Name
, !- Controller List Name
PSZ-AC_5:5 Availability Manager List, !- Availability Manager List Name
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
PSZ-AC_5:5 Air Loop Branches, !- Branch List Name
, !- Connector List Name
PSZ-AC_5:5 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
PSZ-AC_5:5 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
PSZ-AC_5:5 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
PSZ-AC_5:5 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
Sizing:System,
PSZ-AC_5:5, !- AirLoop Name
Sensible, !- Type of Load to Size On
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
1.0000, !- Central Heating Maximum System Air Flow Ratio
7.0, !- Preheat Design Temperature {C}
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Precool Design Temperature {C}
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Central Cooling Design Supply Air Temperature {C}
40.0, !- Central Heating Design Supply Air Temperature {C}
Coincident, !- Type of Zone Sum to Use
No, !- 100% Outdoor Air in Cooling
No, !- 100% Outdoor Air in Heating
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
DesignDay, !- Cooling Supply Air Flow Rate Method
0.0, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
DesignDay, !- Heating Supply Air Flow Rate Method
0.0, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
ZoneSum, !- System Outdoor Air Method
1.0, !- Zone Maximum Outdoor Air Fraction
CoolingDesignCapacity, !- Cooling Design Capacity Method
autosize, !- Cooling Design Capacity {W}
, !- Cooling Design Capacity Per Floor Area {W/m2}
, !- Fraction of Autosized Cooling Design Capacity
HeatingDesignCapacity, !- Heating Design Capacity Method
autosize, !- Heating Design Capacity {W}
, !- Heating Design Capacity Per Floor Area {W/m2}
, !- Fraction of Autosized Heating Design Capacity
OnOff; !- Central Cooling Capacity Control Method
AvailabilityManagerAssignmentList,
PSZ-AC_5:5 Availability Manager List, !- Name
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
PSZ-AC_5:5 Availability Manager; !- Availability Manager 1 Name
AvailabilityManager:NightCycle,
PSZ-AC_5:5 Availability Manager, !- Name
Always_On, !- Applicability Schedule Name
Type2_FAN_SCH, !- Fan Schedule Name
CycleOnAny, !- Control Type
1.0, !- Thermostat Tolerance {deltaC}
FixedRunTime, !- Cycling Run Time Control Type
1800; !- Cycling Run Time {s}
BranchList,
PSZ-AC_5:5 Air Loop Branches, !- Name
PSZ-AC_5:5 Air Loop Main Branch; !- Branch 1 Name
Branch,
PSZ-AC_5:5 Air Loop Main Branch, !- Name
, !- Pressure Drop Curve Name
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
PSZ-AC_5:5_OA, !- Component 1 Name
PSZ-AC_5:5 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
PSZ-AC_5:5_OA-PSZ-AC_5:5_Unitary_PackageNode, !- Component 1 Outlet Node Name
AirLoopHVAC:UnitarySystem, !- Component 2 Object Type
PSZ-AC_5:5_Unitary_Package_DX, !- Component 2 Name
PSZ-AC_5:5_OA-PSZ-AC_5:5_Unitary_PackageNode, !- Component 2 Inlet Node Name
PSZ-AC_5:5 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name
AirLoopHVAC:ControllerList,
PSZ-AC_5:5_OA_Controllers, !- Name
Controller:OutdoorAir, !- Controller 1 Object Type
PSZ-AC_5:5_OA_Controller;!- Controller 1 Name
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
PSZ-AC_5:5_OA_Equipment, !- Name
OutdoorAir:Mixer, !- Component 1 Object Type
PSZ-AC_5:5_OAMixing Box; !- Component 1 Name
AirLoopHVAC:OutdoorAirSystem,
PSZ-AC_5:5_OA, !- Name
PSZ-AC_5:5_OA_Controllers, !- Controller List Name
PSZ-AC_5:5_OA_Equipment, !- Outdoor Air Equipment List Name
PSZ-AC_5:5 Availability Manager List; !- Availability Manager List Name
OutdoorAir:NodeList,
PSZ-AC_5:5_OANode List; !- Node or NodeList Name 1
NodeList,
PSZ-AC_5:5_OANode List, !- Name
PSZ-AC_5:5_OAInlet Node; !- Node 1 Name
OutdoorAir:Mixer,
PSZ-AC_5:5_OAMixing Box, !- Name
PSZ-AC_5:5_OA-PSZ-AC_5:5_Unitary_PackageNode, !- Mixed Air Node Name
PSZ-AC_5:5_OAInlet Node, !- Outdoor Air Stream Node Name
PSZ-AC_5:5_OARelief Node,!- Relief Air Stream Node Name
PSZ-AC_5:5 Supply Equipment Inlet Node; !- Return Air Stream Node Name
SetpointManager:MixedAir,
PSZ-AC_5:5_OAMixed Air Temp Manager, !- Name
Temperature, !- Control Variable
PSZ-AC_5:5 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
PSZ-AC_5:5_OA-PSZ-AC_5:5_Unitary_PackageNode, !- Fan Inlet Node Name
PSZ-AC_5:5_Unitary_PackageHeatCoil air inlet, !- Fan Outlet Node Name
PSZ-AC_5:5_OA-PSZ-AC_5:5_Unitary_PackageNode; !- Setpoint Node or NodeList Name
Controller:OutdoorAir,
PSZ-AC_5:5_OA_Controller,!- Name
PSZ-AC_5:5_OARelief Node,!- Relief Air Outlet Node Name
PSZ-AC_5:5 Supply Equipment Inlet Node, !- Return Air Node Name
PSZ-AC_5:5_OA-PSZ-AC_5:5_Unitary_PackageNode, !- Mixed Air Node Name
PSZ-AC_5:5_OAInlet Node, !- Actuator Node Name
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
DifferentialDryBulb, !- Economizer Control Type
ModulateFlow, !- Economizer Control Action Type
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
, !- Economizer Maximum Limit Dewpoint Temperature {C}
, !- Electronic Enthalpy Limit Curve Name
0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
LockoutWithHeating, !- Lockout Type
FixedMinimum, !- Minimum Limit Type
Type2_MinOA_MotorizedDamper_SCH, !- Minimum Outdoor Air Schedule Name
, !- Minimum Fraction of Outdoor Air Schedule Name
SZ_system_OA_Max_Frac_SCH; !- Maximum Fraction of Outdoor Air Schedule Name
AirLoopHVAC:UnitarySystem,
PSZ-AC_5:5_Unitary_Package_DX, !- Name
Load, !- Control Type
SMstore4, !- Controlling Zone or Thermostat Location
None, !- Dehumidification Control Type
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC_5:5_OA-PSZ-AC_5:5_Unitary_PackageNode, !- Air Inlet Node Name
PSZ-AC_5:5 Supply Equipment Outlet Node, !- Air Outlet Node Name
Fan:SystemModel, !- Supply Fan Object Type
PSZ-AC_5:5_addAQ_Unitary_Package_fan, !- Supply Fan Name
BlowThrough, !- Fan Placement
Type2_FAN_SCH, !- Supply Air Fan Operating Mode Schedule Name
Coil:Heating:Fuel, !- Heating Coil Object Type
PSZ-AC_5:5_Unitary_Package_HeatCoil, !- Heating Coil Name
1, !- DX Heating Coil Sizing Ratio
Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type
PSZ-AC_5:5_Unitary_Package_CoolCoil, !- Cooling Coil Name
No, !- Use DOAS DX Cooling Coil
2, !- Minimum Supply Air Temperature {C}
SensibleOnlyLoadControl, !- Latent Load Control
, !- Supplemental Heating Coil Object Type
, !- Supplemental Heating Coil Name
SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method
AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method
AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method
AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s}
, !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- No Load Fraction of Autosized Cooling Supply Air Flow Rate
, !- No Load Fraction of Autosized Heating Supply Air Flow Rate
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W}
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W}
AUTOSIZE, !- Maximum Supply Air Temperature {C}
, !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C}
, !- Outdoor Dry-Bulb Temperature Sensor Node Name
, !- Maximum Cycling Rate {cycles/hr}
, !- Heat Pump Time Constant {s}
, !- Fraction of On-Cycle Power Use
, !- Heat Pump Fan Delay Time {s}
, !- Ancillary On-Cycle Electric Power {W}
, !- Ancillary Off-Cycle Electric Power {W}
, !- Design Heat Recovery Water Flow Rate {m3/s}
, !- Maximum Temperature for Heat Recovery {C}
, !- Heat Recovery Water Inlet Node Name
, !- Heat Recovery Water Outlet Node Name
UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type
PSZ-AC_5:5_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name
UnitarySystemPerformance:Multispeed,
PSZ-AC_5:5_Unitary_Package_DX_Perf, !- Name
2, !- Number of Speeds for Heating
2, !- Number of Speeds for Cooling
No, !- Single Mode Operation
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
1, !- Heating Speed 1 Supply Air Flow Ratio
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
1, !- Heating Speed 2 Supply Air Flow Ratio
1; !- Cooling Speed 2 Supply Air Flow Ratio
Fan:SystemModel,
PSZ-AC_5:5_addAQ_Unitary_Package_fan, !- Name
Type2_FAN_SCH, !- Availability Schedule Name
PSZ-AC_5:5_OA-PSZ-AC_5:5_Unitary_PackageNode, !- Air Inlet Node Name
PSZ-AC_5:5_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name
AUTOSIZE, !- Design Maximum Air Flow Rate
Discrete, !- Speed Control Method
1, !- Electric Power Minimum Flow Rate Fraction
622.5, !- Design Pressure Rise {Pa}
0.865, !- Motor Efficiency
1.0, ! Motor In Air Stream Fraction
AUTOSIZE, !- Design Electric Power Consumption
TotalEfficiencyAndPressure, !- Design Power Sizing Method
, !- Electric Power Per Unit Flow Rate
, !- Electric Power Per Unit Flow Rate Per Pressure
0.56225, !- Fan Total Efficiency
, !- Electric Power Function of Flow Fraction Curve Name
622.5, !- Night Ventilation Mode Pressure Rise
, !- Night Ventilation Mode Flow Fraction
, !- Motor Loss Zone Name
, !- Motor Loss Radiative Fraction
General, !- End-Use Subcategory
2, !- Number of Speeds
0.66, !- Speed Flow Fraction
0.4, !- Electric Power Fraction
1, !- Speed Flow Fraction
1; !- Electric Power Fraction
Coil:Heating:Fuel,
PSZ-AC_5:5_Unitary_Package_HeatCoil, !- Name
ALWAYS_ON, !- Availability Schedule Name
NaturalGas, !- Fuel Type
0.81, !- Burner Efficiency
AUTOSIZE, !- Nominal Capacity {W}
PSZ-AC_5:5_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name
PSZ-AC_5:5_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name
; !- Temperature Setpoint Node Name; !- Temperature Setpoint Node Name
Coil:Cooling:DX:MultiSpeed,
PSZ-AC_5:5_Unitary_Package_CoolCoil, !- Name
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC_5:5_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name
PSZ-AC_5:5 Supply Equipment Outlet Node, !- Air Outlet Node Name
, !- Condenser Air Inlet Node Name
AirCooled, !- Condenser Type
, !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C}
, !- Supply Water Storage Tank Name
, !- Condensate Collection Water Storage Tank Name
No, !- Apply Part Load Fraction to Speeds Greater than 1
No, !- Apply Latent Degradation to Speeds Greater than 1
, !- Crankcase Heater Capacity {W}
10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C}
, !- Basin Heater Capacity {W/K}
2, !- Basin Heater Setpoint Temperature {C}
, !- Basin Heater Operating Schedule Name
Electricity, !- Fuel Type
2, !- Number of Speeds
10226.21, !- Speed 1 Gross Rated Total Cooling Capacity {W}
0.73479, !- Speed 1 Gross Rated Sensible Heat Ratio
3.7988306741603, !- Speed 1 Gross Rated Cooling COP {W/W}
0.680606666666667, !- Speed 1 Rated Air Flow Rate {m3/s}
0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 1 Total Cooling Capacity Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 1 Total Cooling Capacity Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 1 Energy Input Ratio Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 1 Energy Input Ratio Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 1 Part Load Fraction Correlation Curve Name
, !- Speed 1 Nominal Time for Condensate Removal to Begin {s}
, !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless}
, !- Speed 1 Maximum Cycling Rate {cycles/hr}
, !- Speed 1 Latent Capacity Time Constant {s}
0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless}
, !- Speed 1 Waste Heat Function of Temperature Curve Name
0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless}
, !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s}
, !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W}
20452.42, !- Speed 2 Gross Rated Total Cooling Capacity {W}
0.73479, !- Speed 2 Gross Rated Sensible Heat Ratio
3.7988306741603, !- Speed 2 Gross Rated Cooling COP {W/W}
1.02091, !- Speed 2 Rated Air Flow Rate {m3/s}
0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 2 Total Cooling Capacity Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 2 Total Cooling Capacity Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 2 Energy Input Ratio Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 2 Energy Input Ratio Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 2 Part Load Fraction Correlation Curve Name
, !- Speed 2 Nominal Time for Condensate Removal to Begin {s}
, !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless}
, !- Speed 2 Maximum Cycling Rate {cycles/hr}
, !- Speed 2 Latent Capacity Time Constant {s}
0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless}
, !- Speed 2 Waste Heat Function of Temperature Curve Name
0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless}
, !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s}
; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W}
AirLoopHVAC:SupplyPath,
PSZ-AC_5:5, !- Name
PSZ-AC_5:5 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
PSZ-AC_5:5 Supply Air Splitter; !- Component 1 Name
AirLoopHVAC:ZoneSplitter,
PSZ-AC_5:5 Supply Air Splitter, !- Name
PSZ-AC_5:5 Zone Equipment Inlet Node, !- Inlet Node Name
SMstore4 Direct Air Inlet Node Name; !- Outlet 1 Node Name
AirLoopHVAC:ReturnPath,
PSZ-AC_5:5 Return Air Path, !- Name
PSZ-AC_5:5 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
PSZ-AC_5:5 Return Air Mixer; !- Component 1 Name
AirLoopHVAC:ZoneMixer,
PSZ-AC_5:5 Return Air Mixer, !- Name
PSZ-AC_5:5 Zone Equipment Outlet Node, !- Outlet Node Name
SMstore4 Return Air Node Name; !- Inlet 1 Node Name
AirLoopHVAC,
PSZ-AC_6:6, !- Name
, !- Controller List Name
PSZ-AC_6:6 Availability Manager List, !- Availability Manager List Name
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
PSZ-AC_6:6 Air Loop Branches, !- Branch List Name
, !- Connector List Name
PSZ-AC_6:6 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
PSZ-AC_6:6 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
PSZ-AC_6:6 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
PSZ-AC_6:6 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
Sizing:System,
PSZ-AC_6:6, !- AirLoop Name
Sensible, !- Type of Load to Size On
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
1.0000, !- Central Heating Maximum System Air Flow Ratio
7.0, !- Preheat Design Temperature {C}
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Precool Design Temperature {C}
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Central Cooling Design Supply Air Temperature {C}
40.0, !- Central Heating Design Supply Air Temperature {C}
Coincident, !- Type of Zone Sum to Use
No, !- 100% Outdoor Air in Cooling
No, !- 100% Outdoor Air in Heating
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
DesignDay, !- Cooling Supply Air Flow Rate Method
0.0, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
DesignDay, !- Heating Supply Air Flow Rate Method
0.0, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
ZoneSum, !- System Outdoor Air Method
1.0, !- Zone Maximum Outdoor Air Fraction
CoolingDesignCapacity, !- Cooling Design Capacity Method
autosize, !- Cooling Design Capacity {W}
, !- Cooling Design Capacity Per Floor Area {W/m2}
, !- Fraction of Autosized Cooling Design Capacity
HeatingDesignCapacity, !- Heating Design Capacity Method
autosize, !- Heating Design Capacity {W}
, !- Heating Design Capacity Per Floor Area {W/m2}
, !- Fraction of Autosized Heating Design Capacity
OnOff; !- Central Cooling Capacity Control Method
AvailabilityManagerAssignmentList,
PSZ-AC_6:6 Availability Manager List, !- Name
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
PSZ-AC_6:6 Availability Manager; !- Availability Manager 1 Name
AvailabilityManager:NightCycle,
PSZ-AC_6:6 Availability Manager, !- Name
Always_On, !- Applicability Schedule Name
Type3_FAN_SCH, !- Fan Schedule Name
CycleOnAny, !- Control Type
1.0, !- Thermostat Tolerance {deltaC}
FixedRunTime, !- Cycling Run Time Control Type
1800; !- Cycling Run Time {s}
BranchList,
PSZ-AC_6:6 Air Loop Branches, !- Name
PSZ-AC_6:6 Air Loop Main Branch; !- Branch 1 Name
Branch,
PSZ-AC_6:6 Air Loop Main Branch, !- Name
, !- Pressure Drop Curve Name
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
PSZ-AC_6:6_OA, !- Component 1 Name
PSZ-AC_6:6 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
PSZ-AC_6:6_OA-PSZ-AC_6:6_Unitary_PackageNode, !- Component 1 Outlet Node Name
AirLoopHVAC:UnitarySystem, !- Component 2 Object Type
PSZ-AC_6:6_Unitary_Package_DX, !- Component 2 Name
PSZ-AC_6:6_OA-PSZ-AC_6:6_Unitary_PackageNode, !- Component 2 Inlet Node Name
PSZ-AC_6:6 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name
Fan:SystemModel,
PSZ-AC_6:6_addAQ_Unitary_Package_fan, !- Name
Type3_FAN_SCH, !- Availability Schedule Name
PSZ-AC_6:6_OA-PSZ-AC_6:6_Unitary_PackageNode, !- Air Inlet Node Name
PSZ-AC_6:6_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name
AUTOSIZE, !- Design Maximum Air Flow Rate
Discrete, !- Speed Control Method
1, !- Electric Power Minimum Flow Rate Fraction
622.5, !- Design Pressure Rise {Pa}
0.895, !- Motor Efficiency
1.0, ! Motor In Air Stream Fraction
AUTOSIZE, !- Design Electric Power Consumption
TotalEfficiencyAndPressure, !- Design Power Sizing Method
, !- Electric Power Per Unit Flow Rate
, !- Electric Power Per Unit Flow Rate Per Pressure
0.58175, !- Fan Total Efficiency
, !- Electric Power Function of Flow Fraction Curve Name
622.5, !- Night Ventilation Mode Pressure Rise
, !- Night Ventilation Mode Flow Fraction
, !- Motor Loss Zone Name
, !- Motor Loss Radiative Fraction
General, !- End-Use Subcategory
2, !- Number of Speeds
0.66, !- Speed Flow Fraction
0.4, !- Electric Power Fraction
1, !- Speed Flow Fraction
1; !- Electric Power Fraction
AirLoopHVAC:ControllerList,
PSZ-AC_6:6_OA_Controllers, !- Name
Controller:OutdoorAir, !- Controller 1 Object Type
PSZ-AC_6:6_OA_Controller;!- Controller 1 Name
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
PSZ-AC_6:6_OA_Equipment, !- Name
OutdoorAir:Mixer, !- Component 1 Object Type
PSZ-AC_6:6_OAMixing Box; !- Component 1 Name
AirLoopHVAC:OutdoorAirSystem,
PSZ-AC_6:6_OA, !- Name
PSZ-AC_6:6_OA_Controllers, !- Controller List Name
PSZ-AC_6:6_OA_Equipment, !- Outdoor Air Equipment List Name
PSZ-AC_6:6 Availability Manager List; !- Availability Manager List Name
OutdoorAir:NodeList,
PSZ-AC_6:6_OANode List; !- Node or NodeList Name 1
NodeList,
PSZ-AC_6:6_OANode List, !- Name
PSZ-AC_6:6_OAInlet Node; !- Node 1 Name
OutdoorAir:Mixer,
PSZ-AC_6:6_OAMixing Box, !- Name
PSZ-AC_6:6_OA-PSZ-AC_6:6_Unitary_PackageNode, !- Mixed Air Node Name
PSZ-AC_6:6_OAInlet Node, !- Outdoor Air Stream Node Name !- Outdoor Air Stream Node Name
PSZ-AC_6:6_OARelief Node,!- Relief Air Stream Node Name
PSZ-AC_6:6 Supply Equipment Inlet Node; !- Return Air Stream Node Name
SetpointManager:MixedAir,
PSZ-AC_6:6_OAMixed Air Temp Manager, !- Name
Temperature, !- Control Variable
PSZ-AC_6:6 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
PSZ-AC_6:6_OA-PSZ-AC_6:6_Unitary_PackageNode, !- Fan Inlet Node Name
PSZ-AC_6:6_Unitary_PackageHeatCoil air inlet, !- Fan Outlet Node Name
PSZ-AC_6:6_OA-PSZ-AC_6:6_Unitary_PackageNode; !- Setpoint Node or NodeList Name
Controller:OutdoorAir,
PSZ-AC_6:6_OA_Controller, !- Name
PSZ-AC_6:6_OARelief Node, !- Relief Air Outlet Node Name
PSZ-AC_6:6 Supply Equipment Inlet Node, !- Return Air Node Name
PSZ-AC_6:6_OA-PSZ-AC_6:6_Unitary_PackageNode, !- Mixed Air Node Name
PSZ-AC_6:6_OAInlet Node, !- Actuator Node Name
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
DifferentialDryBulb, !- Economizer Control Type
ModulateFlow, !- Economizer Control Action Type
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
, !- Economizer Maximum Limit Dewpoint Temperature {C}
, !- Electronic Enthalpy Limit Curve Name
0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
LockoutWithHeating, !- Lockout Type
FixedMinimum, !- Minimum Limit Type
Type3_MinOA_MotorizedDamper_SCH, !- Minimum Outdoor Air Schedule Name
, !- Minimum Fraction of Outdoor Air Schedule Name
SZ_system_OA_Max_Frac_SCH, !- Maximum Fraction of Outdoor Air Schedule Name
, !- Mechanical Ventilation Controller Name
, !- Time of Day Economizer Control Schedule Name
, !- High Humidity Control
, !- Humidistat Control Zone Name
, !- High Humidity Outdoor Air Flow Ratio
, !- Control High Indoor Humidity Based on Outdoor Humidity Ratio
; !- Minimum Fraction of Outdoor Air Schedule Name
!- Heat Recovery Bypass Control Type
AirLoopHVAC:UnitarySystem,
PSZ-AC_6:6_Unitary_Package_DX, !- Name
Load, !- Control Type
LGstore2, !- Controlling Zone or Thermostat Location
None, !- Dehumidification Control Type
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC_6:6_OA-PSZ-AC_6:6_Unitary_PackageNode, !- Air Inlet Node Name
PSZ-AC_6:6 Supply Equipment Outlet Node, !- Air Outlet Node Name
Fan:SystemModel, !- Supply Fan Object Type
PSZ-AC_6:6_addAQ_Unitary_Package_fan, !- Supply Fan Name
BlowThrough, !- Fan Placement
Type3_FAN_SCH, !- Supply Air Fan Operating Mode Schedule Name
Coil:Heating:Fuel, !- Heating Coil Object Type
PSZ-AC_6:6_Unitary_Package_HeatCoil, !- Heating Coil Name
1, !- DX Heating Coil Sizing Ratio
Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type
PSZ-AC_6:6_Unitary_Package_CoolCoil, !- Cooling Coil Name
No, !- Use DOAS DX Cooling Coil
2, !- Minimum Supply Air Temperature {C}
SensibleOnlyLoadControl, !- Latent Load Control
, !- Supplemental Heating Coil Object Type
, !- Supplemental Heating Coil Name
SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method
AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method
AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method
AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s}
, !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- No Load Fraction of Autosized Cooling Supply Air Flow Rate
, !- No Load Fraction of Autosized Heating Supply Air Flow Rate
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W}
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W}
AUTOSIZE, !- Maximum Supply Air Temperature {C}
, !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C}
, !- Outdoor Dry-Bulb Temperature Sensor Node Name
, !- Maximum Cycling Rate {cycles/hr}
, !- Heat Pump Time Constant {s}
, !- Fraction of On-Cycle Power Use
, !- Heat Pump Fan Delay Time {s}
, !- Ancillary On-Cycle Electric Power {W}
, !- Ancillary Off-Cycle Electric Power {W}
, !- Design Heat Recovery Water Flow Rate {m3/s}
, !- Maximum Temperature for Heat Recovery {C}
, !- Heat Recovery Water Inlet Node Name
, !- Heat Recovery Water Outlet Node Name
UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type
PSZ-AC_6:6_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name
UnitarySystemPerformance:Multispeed,
PSZ-AC_6:6_Unitary_Package_DX_Perf, !- Name
2, !- Number of Speeds for Heating
2, !- Number of Speeds for Cooling
No, !- Single Mode Operation
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
1, !- Heating Speed 1 Supply Air Flow Ratio
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
1, !- Heating Speed 2 Supply Air Flow Ratio
1; !- Cooling Speed 2 Supply Air Flow Ratio
Coil:Heating:Fuel,
PSZ-AC_6:6_Unitary_Package_HeatCoil, !- Name
ALWAYS_ON, !- Availability Schedule Name
NaturalGas, !- Fuel Type
0.81, !- Burner Efficiency
AUTOSIZE, !- Nominal Capacity {W}
PSZ-AC_6:6_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name
PSZ-AC_6:6_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name
; !- Temperature Setpoint Node Name
Coil:Cooling:DX:MultiSpeed,
PSZ-AC_6:6_Unitary_Package_CoolCoil, !- Name
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC_6:6_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name
PSZ-AC_6:6 Supply Equipment Outlet Node, !- Air Outlet Node Name
, !- Condenser Air Inlet Node Name
AirCooled, !- Condenser Type
, !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C}
, !- Supply Water Storage Tank Name
, !- Condensate Collection Water Storage Tank Name
No, !- Apply Part Load Fraction to Speeds Greater than 1
No, !- Apply Latent Degradation to Speeds Greater than 1
, !- Crankcase Heater Capacity {W}
10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C}
, !- Basin Heater Capacity {W/K}
2, !- Basin Heater Setpoint Temperature {C}
, !- Basin Heater Operating Schedule Name
Electricity, !- Fuel Type
2, !- Number of Speeds
18662.875, !- Speed 1 Gross Rated Total Cooling Capacity {W}
0.68566, !- Speed 1 Gross Rated Sensible Heat Ratio
3.7988306741603, !- Speed 1 Gross Rated Cooling COP {W/W}
1.04121333333333, !- Speed 1 Rated Air Flow Rate {m3/s}
0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 1 Total Cooling Capacity Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 1 Total Cooling Capacity Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 1 Energy Input Ratio Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 1 Energy Input Ratio Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 1 Part Load Fraction Correlation Curve Name
, !- Speed 1 Nominal Time for Condensate Removal to Begin {s}
, !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless}
, !- Speed 1 Maximum Cycling Rate {cycles/hr}
, !- Speed 1 Latent Capacity Time Constant {s}
0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless}
, !- Speed 1 Waste Heat Function of Temperature Curve Name
0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless}
, !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s}
, !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W}
37325.75, !- Speed 2 Gross Rated Total Cooling Capacity {W}
0.68566, !- Speed 2 Gross Rated Sensible Heat Ratio
3.7988306741603, !- Speed 2 Gross Rated Cooling COP {W/W}
1.56182, !- Speed 2 Rated Air Flow Rate {m3/s}
0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 2 Total Cooling Capacity Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 2 Total Cooling Capacity Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 2 Energy Input Ratio Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 2 Energy Input Ratio Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 2 Part Load Fraction Correlation Curve Name
, !- Speed 2 Nominal Time for Condensate Removal to Begin {s}
, !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless}
, !- Speed 2 Maximum Cycling Rate {cycles/hr}
, !- Speed 2 Latent Capacity Time Constant {s}
0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless}
, !- Speed 2 Waste Heat Function of Temperature Curve Name
0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless}
, !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s}
; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W}
AirLoopHVAC:SupplyPath,
PSZ-AC_6:6, !- Name
PSZ-AC_6:6 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
PSZ-AC_6:6 Supply Air Splitter; !- Component 1 Name
AirLoopHVAC:ZoneSplitter,
PSZ-AC_6:6 Supply Air Splitter, !- Name
PSZ-AC_6:6 Zone Equipment Inlet Node, !- Inlet Node Name
LGstore2 Direct Air Inlet Node Name; !- Outlet 1 Node Name
AirLoopHVAC:ReturnPath,
PSZ-AC_6:6 Return Air Path, !- Name
PSZ-AC_6:6 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
PSZ-AC_6:6 Return Air Mixer; !- Component 1 Name
AirLoopHVAC:ZoneMixer,
PSZ-AC_6:6 Return Air Mixer, !- Name
PSZ-AC_6:6 Zone Equipment Outlet Node, !- Outlet Node Name
LGstore2 Return Air Node Name; !- Inlet 1 Node Name
AirLoopHVAC,
PSZ-AC_7:7, !- Name
, !- Controller List Name
PSZ-AC_7:7 Availability Manager List, !- Availability Manager List Name
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
PSZ-AC_7:7 Air Loop Branches, !- Branch List Name
, !- Connector List Name
PSZ-AC_7:7 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
PSZ-AC_7:7 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
PSZ-AC_7:7 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
PSZ-AC_7:7 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
Sizing:System,
PSZ-AC_7:7, !- AirLoop Name
Sensible, !- Type of Load to Size On
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
1.0000, !- Central Heating Maximum System Air Flow Ratio
7.0, !- Preheat Design Temperature {C}
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Precool Design Temperature {C}
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Central Cooling Design Supply Air Temperature {C}
40.0, !- Central Heating Design Supply Air Temperature {C}
Coincident, !- Type of Zone Sum to Use
No, !- 100% Outdoor Air in Cooling
No, !- 100% Outdoor Air in Heating
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
DesignDay, !- Cooling Supply Air Flow Rate Method
0.0, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
DesignDay, !- Heating Supply Air Flow Rate Method
0.0, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
ZoneSum, !- System Outdoor Air Method
1.0, !- Zone Maximum Outdoor Air Fraction
CoolingDesignCapacity, !- Cooling Design Capacity Method
autosize, !- Cooling Design Capacity {W}
, !- Cooling Design Capacity Per Floor Area {W/m2}
, !- Fraction of Autosized Cooling Design Capacity
HeatingDesignCapacity, !- Heating Design Capacity Method
autosize, !- Heating Design Capacity {W}
, !- Heating Design Capacity Per Floor Area {W/m2}
, !- Fraction of Autosized Heating Design Capacity
OnOff; !- Central Cooling Capacity Control Method
AvailabilityManagerAssignmentList,
PSZ-AC_7:7 Availability Manager List, !- Name
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
PSZ-AC_7:7 Availability Manager; !- Availability Manager 1 Name
AvailabilityManager:NightCycle,
PSZ-AC_7:7 Availability Manager, !- Name
Always_On, !- Applicability Schedule Name
Type3_FAN_SCH, !- Fan Schedule Name
CycleOnAny, !- Control Type
1.0, !- Thermostat Tolerance {deltaC}
FixedRunTime, !- Cycling Run Time Control Type
1800; !- Cycling Run Time {s}
BranchList,
PSZ-AC_7:7 Air Loop Branches, !- Name
PSZ-AC_7:7 Air Loop Main Branch; !- Branch 1 Name
Branch,
PSZ-AC_7:7 Air Loop Main Branch, !- Name
, !- Pressure Drop Curve Name
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
PSZ-AC_7:7_OA, !- Component 1 Name
PSZ-AC_7:7 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
PSZ-AC_7:7_OA-PSZ-AC_7:7_Unitary_PackageNode, !- Component 1 Outlet Node Name
AirLoopHVAC:UnitarySystem, !- Component 2 Object Type
PSZ-AC_7:7_Unitary_Package_DX, !- Component 2 Name
PSZ-AC_7:7_OA-PSZ-AC_7:7_Unitary_PackageNode, !- Component 2 Inlet Node Name
PSZ-AC_7:7 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name
AirLoopHVAC:ControllerList,
PSZ-AC_7:7_OA_Controllers, !- Name
Controller:OutdoorAir, !- Controller 1 Object Type
PSZ-AC_7:7_OA_Controller;!- Controller 1 Name
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
PSZ-AC_7:7_OA_Equipment, !- Name
OutdoorAir:Mixer, !- Component 1 Object Type
PSZ-AC_7:7_OAMixing Box; !- Component 1 Name
AirLoopHVAC:OutdoorAirSystem,
PSZ-AC_7:7_OA, !- Name
PSZ-AC_7:7_OA_Controllers, !- Controller List Name
PSZ-AC_7:7_OA_Equipment, !- Outdoor Air Equipment List Name
PSZ-AC_7:7 Availability Manager List; !- Availability Manager List Name
OutdoorAir:NodeList,
PSZ-AC_7:7_OANode List; !- Node or NodeList Name 1
NodeList,
PSZ-AC_7:7_OANode List, !- Name
PSZ-AC_7:7_OAInlet Node; !- Node 1 Name
OutdoorAir:Mixer,
PSZ-AC_7:7_OAMixing Box, !- Name
PSZ-AC_7:7_OA-PSZ-AC_7:7_Unitary_PackageNode, !- Mixed Air Node Name
PSZ-AC_7:7_OAInlet Node, !- Outdoor Air Stream Node Name
PSZ-AC_7:7_OARelief Node,!- Relief Air Stream Node Name
PSZ-AC_7:7 Supply Equipment Inlet Node; !- Return Air Stream Node Name
SetpointManager:MixedAir,
PSZ-AC_7:7_OAMixed Air Temp Manager, !- Name
Temperature, !- Control Variable
PSZ-AC_7:7 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
PSZ-AC_7:7_OA-PSZ-AC_7:7_Unitary_PackageNode, !- Fan Inlet Node Name
PSZ-AC_7:7_Unitary_PackageHeatCoil air inlet, !- Fan Outlet Node Name
PSZ-AC_7:7_OA-PSZ-AC_7:7_Unitary_PackageNode; !- Setpoint Node or NodeList Name
Controller:OutdoorAir,
PSZ-AC_7:7_OA_Controller,!- Name
PSZ-AC_7:7_OARelief Node,!- Relief Air Outlet Node Name
PSZ-AC_7:7 Supply Equipment Inlet Node, !- Return Air Node Name
PSZ-AC_7:7_OA-PSZ-AC_7:7_Unitary_PackageNode, !- Mixed Air Node Name
PSZ-AC_7:7_OAInlet Node, !- Actuator Node Name
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
DifferentialDryBulb, !- Economizer Control Type
ModulateFlow, !- Economizer Control Action Type
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
, !- Economizer Maximum Limit Dewpoint Temperature {C}
, !- Electronic Enthalpy Limit Curve Name
0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
LockoutWithHeating, !- Lockout Type
FixedMinimum, !- Minimum Limit Type
Type3_MinOA_MotorizedDamper_SCH, !- Minimum Outdoor Air Schedule Name
, !- Minimum Fraction of Outdoor Air Schedule Name
SZ_system_OA_Max_Frac_SCH; !- Maximum Fraction of Outdoor Air Schedule Name
AirLoopHVAC:UnitarySystem,
PSZ-AC_7:7_Unitary_Package_DX, !- Name
Load, !- Control Type
SMstore5, !- Controlling Zone or Thermostat Location
None, !- Dehumidification Control Type
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC_7:7_OA-PSZ-AC_7:7_Unitary_PackageNode, !- Air Inlet Node Name
PSZ-AC_7:7 Supply Equipment Outlet Node, !- Air Outlet Node Name
Fan:SystemModel, !- Supply Fan Object Type
PSZ-AC_7:7_addAQ_Unitary_Package_fan, !- Supply Fan Name
BlowThrough, !- Fan Placement
Type3_FAN_SCH, !- Supply Air Fan Operating Mode Schedule Name
Coil:Heating:Fuel, !- Heating Coil Object Type
PSZ-AC_7:7_Unitary_Package_HeatCoil, !- Heating Coil Name
1, !- DX Heating Coil Sizing Ratio
Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type
PSZ-AC_7:7_Unitary_Package_CoolCoil, !- Cooling Coil Name
No, !- Use DOAS DX Cooling Coil
2, !- Minimum Supply Air Temperature {C}
SensibleOnlyLoadControl, !- Latent Load Control
, !- Supplemental Heating Coil Object Type
, !- Supplemental Heating Coil Name
SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method
AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method
AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method
AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s}
, !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- No Load Fraction of Autosized Cooling Supply Air Flow Rate
, !- No Load Fraction of Autosized Heating Supply Air Flow Rate
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W}
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W}
AUTOSIZE, !- Maximum Supply Air Temperature {C}
, !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C}
, !- Outdoor Dry-Bulb Temperature Sensor Node Name
, !- Maximum Cycling Rate {cycles/hr}
, !- Heat Pump Time Constant {s}
, !- Fraction of On-Cycle Power Use
, !- Heat Pump Fan Delay Time {s}
, !- Ancillary On-Cycle Electric Power {W}
, !- Ancillary Off-Cycle Electric Power {W}
, !- Design Heat Recovery Water Flow Rate {m3/s}
, !- Maximum Temperature for Heat Recovery {C}
, !- Heat Recovery Water Inlet Node Name
, !- Heat Recovery Water Outlet Node Name
UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type
PSZ-AC_7:7_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name
UnitarySystemPerformance:Multispeed,
PSZ-AC_7:7_Unitary_Package_DX_Perf, !- Name
2, !- Number of Speeds for Heating
2, !- Number of Speeds for Cooling
No, !- Single Mode Operation
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
1, !- Heating Speed 1 Supply Air Flow Ratio
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
1, !- Heating Speed 2 Supply Air Flow Ratio
1; !- Cooling Speed 2 Supply Air Flow Ratio
Fan:SystemModel,
PSZ-AC_7:7_addAQ_Unitary_Package_fan, !- Name
Type3_FAN_SCH, !- Availability Schedule Name
PSZ-AC_7:7_OA-PSZ-AC_7:7_Unitary_PackageNode, !- Air Inlet Node Name
PSZ-AC_7:7_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name
AUTOSIZE, !- Design Maximum Air Flow Rate
Discrete, !- Speed Control Method
1, !- Electric Power Minimum Flow Rate Fraction
622.5, !- Design Pressure Rise {Pa}
0.865, !- Motor Efficiency
1.0, ! Motor In Air Stream Fraction
AUTOSIZE, !- Design Electric Power Consumption
TotalEfficiencyAndPressure, !- Design Power Sizing Method
, !- Electric Power Per Unit Flow Rate
, !- Electric Power Per Unit Flow Rate Per Pressure
0.56225, !- Fan Total Efficiency
, !- Electric Power Function of Flow Fraction Curve Name
622.5, !- Night Ventilation Mode Pressure Rise
, !- Night Ventilation Mode Flow Fraction
, !- Motor Loss Zone Name
, !- Motor Loss Radiative Fraction
General, !- End-Use Subcategory
2, !- Number of Speeds
0.66, !- Speed Flow Fraction
0.4, !- Electric Power Fraction
1, !- Speed Flow Fraction
1; !- Electric Power Fraction
Coil:Heating:Fuel,
PSZ-AC_7:7_Unitary_Package_HeatCoil, !- Name
ALWAYS_ON, !- Availability Schedule Name
NaturalGas, !- Fuel Type
0.81, !- Burner Efficiency
AUTOSIZE, !- Nominal Capacity {W}
PSZ-AC_7:7_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name
PSZ-AC_7:7_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name
; !- Temperature Setpoint Node Name
Coil:Cooling:DX:MultiSpeed,
PSZ-AC_7:7_Unitary_Package_CoolCoil, !- Name
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC_7:7_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name
PSZ-AC_7:7 Supply Equipment Outlet Node, !- Air Outlet Node Name
, !- Condenser Air Inlet Node Name
AirCooled, !- Condenser Type
, !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C}
, !- Supply Water Storage Tank Name
, !- Condensate Collection Water Storage Tank Name
No, !- Apply Part Load Fraction to Speeds Greater than 1
No, !- Apply Latent Degradation to Speeds Greater than 1
, !- Crankcase Heater Capacity {W}
10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C}
, !- Basin Heater Capacity {W/K}
2, !- Basin Heater Setpoint Temperature {C}
, !- Basin Heater Operating Schedule Name
Electricity, !- Fuel Type
2, !- Number of Speeds
10043.905, !- Speed 1 Gross Rated Total Cooling Capacity {W}
0.68590, !- Speed 1 Gross Rated Sensible Heat Ratio
3.7988306741603, !- Speed 1 Gross Rated Cooling COP {W/W}
0.560886666666667, !- Speed 1 Rated Air Flow Rate {m3/s}
0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 1 Total Cooling Capacity Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 1 Total Cooling Capacity Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 1 Energy Input Ratio Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 1 Energy Input Ratio Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 1 Part Load Fraction Correlation Curve Name
, !- Speed 1 Nominal Time for Condensate Removal to Begin {s}
, !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless}
, !- Speed 1 Maximum Cycling Rate {cycles/hr}
, !- Speed 1 Latent Capacity Time Constant {s}
0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless}
, !- Speed 1 Waste Heat Function of Temperature Curve Name
0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless}
, !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s}
, !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W}
20087.81, !- Speed 2 Gross Rated Total Cooling Capacity {W}
0.68590, !- Speed 2 Gross Rated Sensible Heat Ratio
3.7988306741603, !- Speed 2 Gross Rated Cooling COP {W/W}
0.84133, !- Speed 2 Rated Air Flow Rate {m3/s}
0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 2 Total Cooling Capacity Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 2 Total Cooling Capacity Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 2 Energy Input Ratio Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 2 Energy Input Ratio Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 2 Part Load Fraction Correlation Curve Name
, !- Speed 2 Nominal Time for Condensate Removal to Begin {s}
, !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless}
, !- Speed 2 Maximum Cycling Rate {cycles/hr}
, !- Speed 2 Latent Capacity Time Constant {s}
0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless}
, !- Speed 2 Waste Heat Function of Temperature Curve Name
0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless}
, !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s}
; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W}
AirLoopHVAC:SupplyPath,
PSZ-AC_7:7, !- Name
PSZ-AC_7:7 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
PSZ-AC_7:7 Supply Air Splitter; !- Component 1 Name
AirLoopHVAC:ZoneSplitter,
PSZ-AC_7:7 Supply Air Splitter, !- Name
PSZ-AC_7:7 Zone Equipment Inlet Node, !- Inlet Node Name
SMstore5 Direct Air Inlet Node Name; !- Outlet 1 Node Name
AirLoopHVAC:ReturnPath,
PSZ-AC_7:7 Return Air Path, !- Name
PSZ-AC_7:7 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
PSZ-AC_7:7 Return Air Mixer; !- Component 1 Name
AirLoopHVAC:ZoneMixer,
PSZ-AC_7:7 Return Air Mixer, !- Name
PSZ-AC_7:7 Zone Equipment Outlet Node, !- Outlet Node Name
SMstore5 Return Air Node Name; !- Inlet 1 Node Name
AirLoopHVAC,
PSZ-AC_8:8, !- Name
, !- Controller List Name
PSZ-AC_8:8 Availability Manager List, !- Availability Manager List Name
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
PSZ-AC_8:8 Air Loop Branches, !- Branch List Name
, !- Connector List Name
PSZ-AC_8:8 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
PSZ-AC_8:8 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
PSZ-AC_8:8 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
PSZ-AC_8:8 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
Sizing:System,
PSZ-AC_8:8, !- AirLoop Name
Sensible, !- Type of Load to Size On
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
1.0000, !- Central Heating Maximum System Air Flow Ratio
7.0, !- Preheat Design Temperature {C}
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Precool Design Temperature {C}
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Central Cooling Design Supply Air Temperature {C}
40.0, !- Central Heating Design Supply Air Temperature {C}
Coincident, !- Type of Zone Sum to Use
No, !- 100% Outdoor Air in Cooling
No, !- 100% Outdoor Air in Heating
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
DesignDay, !- Cooling Supply Air Flow Rate Method
0.0, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
DesignDay, !- Heating Supply Air Flow Rate Method
0.0, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
ZoneSum, !- System Outdoor Air Method
1.0, !- Zone Maximum Outdoor Air Fraction
CoolingDesignCapacity, !- Cooling Design Capacity Method
autosize, !- Cooling Design Capacity {W}
, !- Cooling Design Capacity Per Floor Area {W/m2}
, !- Fraction of Autosized Cooling Design Capacity
HeatingDesignCapacity, !- Heating Design Capacity Method
autosize, !- Heating Design Capacity {W}
, !- Heating Design Capacity Per Floor Area {W/m2}
, !- Fraction of Autosized Heating Design Capacity
OnOff; !- Central Cooling Capacity Control Method
AvailabilityManagerAssignmentList,
PSZ-AC_8:8 Availability Manager List, !- Name
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
PSZ-AC_8:8 Availability Manager; !- Availability Manager 1 Name
AvailabilityManager:NightCycle,
PSZ-AC_8:8 Availability Manager, !- Name
Always_On, !- Applicability Schedule Name
Type3_FAN_SCH, !- Fan Schedule Name
CycleOnAny, !- Control Type
1.0, !- Thermostat Tolerance {deltaC}
FixedRunTime, !- Cycling Run Time Control Type
1800; !- Cycling Run Time {s}
BranchList,
PSZ-AC_8:8 Air Loop Branches, !- Name
PSZ-AC_8:8 Air Loop Main Branch; !- Branch 1 Name
Branch,
PSZ-AC_8:8 Air Loop Main Branch, !- Name
, !- Pressure Drop Curve Name
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
PSZ-AC_8:8_OA, !- Component 1 Name
PSZ-AC_8:8 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
PSZ-AC_8:8_OA-PSZ-AC_8:8_Unitary_PackageNode, !- Component 1 Outlet Node Name
AirLoopHVAC:UnitarySystem, !- Component 2 Object Type
PSZ-AC_8:8_Unitary_Package_DX, !- Component 2 Name
PSZ-AC_8:8_OA-PSZ-AC_8:8_Unitary_PackageNode, !- Component 2 Inlet Node Name
PSZ-AC_8:8 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name
AirLoopHVAC:ControllerList,
PSZ-AC_8:8_OA_Controllers, !- Name
Controller:OutdoorAir, !- Controller 1 Object Type
PSZ-AC_8:8_OA_Controller;!- Controller 1 Name
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
PSZ-AC_8:8_OA_Equipment, !- Name
OutdoorAir:Mixer, !- Component 1 Object Type
PSZ-AC_8:8_OAMixing Box; !- Component 1 Name
AirLoopHVAC:OutdoorAirSystem,
PSZ-AC_8:8_OA, !- Name
PSZ-AC_8:8_OA_Controllers, !- Controller List Name
PSZ-AC_8:8_OA_Equipment, !- Outdoor Air Equipment List Name
PSZ-AC_8:8 Availability Manager List; !- Availability Manager List Name
OutdoorAir:NodeList,
PSZ-AC_8:8_OANode List; !- Node or NodeList Name 1
NodeList,
PSZ-AC_8:8_OANode List, !- Name
PSZ-AC_8:8_OAInlet Node; !- Node 1 Name
OutdoorAir:Mixer,
PSZ-AC_8:8_OAMixing Box, !- Name
PSZ-AC_8:8_OA-PSZ-AC_8:8_Unitary_PackageNode, !- Mixed Air Node Name
PSZ-AC_8:8_OAInlet Node, !- Outdoor Air Stream Node Name
PSZ-AC_8:8_OARelief Node,!- Relief Air Stream Node Name
PSZ-AC_8:8 Supply Equipment Inlet Node; !- Return Air Stream Node Name
SetpointManager:MixedAir,
PSZ-AC_8:8_OAMixed Air Temp Manager, !- Name
Temperature, !- Control Variable
PSZ-AC_8:8 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
PSZ-AC_8:8_OA-PSZ-AC_8:8_Unitary_PackageNode, !- Fan Inlet Node Name
PSZ-AC_8:8_Unitary_PackageHeatCoil air inlet, !- Fan Outlet Node Name
PSZ-AC_8:8_OA-PSZ-AC_8:8_Unitary_PackageNode; !- Setpoint Node or NodeList Name
Controller:OutdoorAir,
PSZ-AC_8:8_OA_Controller,!- Name
PSZ-AC_8:8_OARelief Node,!- Relief Air Outlet Node Name
PSZ-AC_8:8 Supply Equipment Inlet Node, !- Return Air Node Name
PSZ-AC_8:8_OA-PSZ-AC_8:8_Unitary_PackageNode, !- Mixed Air Node Name
PSZ-AC_8:8_OAInlet Node, !- Actuator Node Name
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
DifferentialDryBulb, !- Economizer Control Type
ModulateFlow, !- Economizer Control Action Type
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
, !- Economizer Maximum Limit Dewpoint Temperature {C}
, !- Electronic Enthalpy Limit Curve Name
0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
LockoutWithHeating, !- Lockout Type
FixedMinimum, !- Minimum Limit Type
Type3_MinOA_MotorizedDamper_SCH, !- Minimum Outdoor Air Schedule Name
, !- Minimum Fraction of Outdoor Air Schedule Name
SZ_system_OA_Max_Frac_SCH; !- Maximum Fraction of Outdoor Air Schedule Name
AirLoopHVAC:UnitarySystem,
PSZ-AC_8:8_Unitary_Package_DX, !- Name
Load, !- Control Type
SMstore6, !- Controlling Zone or Thermostat Location
None, !- Dehumidification Control Type
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC_8:8_OA-PSZ-AC_8:8_Unitary_PackageNode, !- Air Inlet Node Name
PSZ-AC_8:8 Supply Equipment Outlet Node, !- Air Outlet Node Name
Fan:SystemModel, !- Supply Fan Object Type
PSZ-AC_8:8_addAQ_Unitary_Package_fan, !- Supply Fan Name
BlowThrough, !- Fan Placement
Type3_FAN_SCH, !- Supply Air Fan Operating Mode Schedule Name
Coil:Heating:Fuel, !- Heating Coil Object Type
PSZ-AC_8:8_Unitary_Package_HeatCoil, !- Heating Coil Name
1, !- DX Heating Coil Sizing Ratio
Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type
PSZ-AC_8:8_Unitary_Package_CoolCoil, !- Cooling Coil Name
No, !- Use DOAS DX Cooling Coil
2, !- Minimum Supply Air Temperature {C}
SensibleOnlyLoadControl, !- Latent Load Control
, !- Supplemental Heating Coil Object Type
, !- Supplemental Heating Coil Name
SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method
AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method
AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method
AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s}
, !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- No Load Fraction of Autosized Cooling Supply Air Flow Rate
, !- No Load Fraction of Autosized Heating Supply Air Flow Rate
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W}
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W}
AUTOSIZE, !- Maximum Supply Air Temperature {C}
, !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C}
, !- Outdoor Dry-Bulb Temperature Sensor Node Name
, !- Maximum Cycling Rate {cycles/hr}
, !- Heat Pump Time Constant {s}
, !- Fraction of On-Cycle Power Use
, !- Heat Pump Fan Delay Time {s}
, !- Ancillary On-Cycle Electric Power {W}
, !- Ancillary Off-Cycle Electric Power {W}
, !- Design Heat Recovery Water Flow Rate {m3/s}
, !- Maximum Temperature for Heat Recovery {C}
, !- Heat Recovery Water Inlet Node Name
, !- Heat Recovery Water Outlet Node Name
UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type
PSZ-AC_8:8_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name
UnitarySystemPerformance:Multispeed,
PSZ-AC_8:8_Unitary_Package_DX_Perf, !- Name
2, !- Number of Speeds for Heating
2, !- Number of Speeds for Cooling
No, !- Single Mode Operation
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
1, !- Heating Speed 1 Supply Air Flow Ratio
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
1, !- Heating Speed 2 Supply Air Flow Ratio
1; !- Cooling Speed 2 Supply Air Flow Ratio
Fan:SystemModel,
PSZ-AC_8:8_addAQ_Unitary_Package_fan, !- Name
Type3_FAN_SCH, !- Availability Schedule Name
PSZ-AC_8:8_OA-PSZ-AC_8:8_Unitary_PackageNode, !- Air Inlet Node Name
PSZ-AC_8:8_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name
AUTOSIZE, !- Design Maximum Air Flow Rate
Discrete, !- Speed Control Method
1, !- Electric Power Minimum Flow Rate Fraction
622.5, !- Design Pressure Rise {Pa}
0.865, !- Motor Efficiency
1.0, ! Motor In Air Stream Fraction
AUTOSIZE, !- Design Electric Power Consumption
TotalEfficiencyAndPressure, !- Design Power Sizing Method
, !- Electric Power Per Unit Flow Rate
, !- Electric Power Per Unit Flow Rate Per Pressure
0.56225, !- Fan Total Efficiency
, !- Electric Power Function of Flow Fraction Curve Name
622.5, !- Night Ventilation Mode Pressure Rise
, !- Night Ventilation Mode Flow Fraction
, !- Motor Loss Zone Name
, !- Motor Loss Radiative Fraction
General, !- End-Use Subcategory
2, !- Number of Speeds
0.66, !- Speed Flow Fraction
0.4, !- Electric Power Fraction
1, !- Speed Flow Fraction
1; !- Electric Power Fraction
Coil:Heating:Fuel,
PSZ-AC_8:8_Unitary_Package_HeatCoil, !- Name
ALWAYS_ON, !- Availability Schedule Name
NaturalGas, !- Fuel Type
0.81, !- Burner Efficiency
AUTOSIZE, !- Nominal Capacity {W}
PSZ-AC_8:8_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name
PSZ-AC_8:8_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name
; !- Temperature Setpoint Node Name
Coil:Cooling:DX:MultiSpeed,
PSZ-AC_8:8_Unitary_Package_CoolCoil, !- Name
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC_8:8_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name
PSZ-AC_8:8 Supply Equipment Outlet Node, !- Air Outlet Node Name
, !- Condenser Air Inlet Node Name
AirCooled, !- Condenser Type
, !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C}
, !- Supply Water Storage Tank Name
, !- Condensate Collection Water Storage Tank Name
No, !- Apply Part Load Fraction to Speeds Greater than 1
No, !- Apply Latent Degradation to Speeds Greater than 1
, !- Crankcase Heater Capacity {W}
10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C}
, !- Basin Heater Capacity {W/K}
2, !- Basin Heater Setpoint Temperature {C}
, !- Basin Heater Operating Schedule Name
Electricity, !- Fuel Type
2, !- Number of Speeds
10066.91, !- Speed 1 Gross Rated Total Cooling Capacity {W}
0.68505, !- Speed 1 Gross Rated Sensible Heat Ratio
3.7988306741603, !- Speed 1 Gross Rated Cooling COP {W/W}
0.560306666666667, !- Speed 1 Rated Air Flow Rate {m3/s}
0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 1 Total Cooling Capacity Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 1 Total Cooling Capacity Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 1 Energy Input Ratio Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 1 Energy Input Ratio Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 1 Part Load Fraction Correlation Curve Name
, !- Speed 1 Nominal Time for Condensate Removal to Begin {s}
, !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless}
, !- Speed 1 Maximum Cycling Rate {cycles/hr}
, !- Speed 1 Latent Capacity Time Constant {s}
0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless}
, !- Speed 1 Waste Heat Function of Temperature Curve Name
0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless}
, !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s}
, !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W}
20133.82, !- Speed 2 Gross Rated Total Cooling Capacity {W}
0.68505, !- Speed 2 Gross Rated Sensible Heat Ratio
3.7988306741603, !- Speed 2 Gross Rated Cooling COP {W/W}
0.84046, !- Speed 2 Rated Air Flow Rate {m3/s}
0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 2 Total Cooling Capacity Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 2 Total Cooling Capacity Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 2 Energy Input Ratio Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 2 Energy Input Ratio Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 2 Part Load Fraction Correlation Curve Name
, !- Speed 2 Nominal Time for Condensate Removal to Begin {s}
, !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless}
, !- Speed 2 Maximum Cycling Rate {cycles/hr}
, !- Speed 2 Latent Capacity Time Constant {s}
0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless}
, !- Speed 2 Waste Heat Function of Temperature Curve Name
0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless}
, !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s}
; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W}
AirLoopHVAC:SupplyPath,
PSZ-AC_8:8, !- Name
PSZ-AC_8:8 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
PSZ-AC_8:8 Supply Air Splitter; !- Component 1 Name
AirLoopHVAC:ZoneSplitter,
PSZ-AC_8:8 Supply Air Splitter, !- Name
PSZ-AC_8:8 Zone Equipment Inlet Node, !- Inlet Node Name
SMstore6 Direct Air Inlet Node Name; !- Outlet 1 Node Name
AirLoopHVAC:ReturnPath,
PSZ-AC_8:8 Return Air Path, !- Name
PSZ-AC_8:8 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
PSZ-AC_8:8 Return Air Mixer; !- Component 1 Name
AirLoopHVAC:ZoneMixer,
PSZ-AC_8:8 Return Air Mixer, !- Name
PSZ-AC_8:8 Zone Equipment Outlet Node, !- Outlet Node Name
SMstore6 Return Air Node Name; !- Inlet 1 Node Name
AirLoopHVAC,
PSZ-AC_9:9, !- Name
, !- Controller List Name
PSZ-AC_9:9 Availability Manager List, !- Availability Manager List Name
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
PSZ-AC_9:9 Air Loop Branches, !- Branch List Name
, !- Connector List Name
PSZ-AC_9:9 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
PSZ-AC_9:9 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
PSZ-AC_9:9 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
PSZ-AC_9:9 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
Sizing:System,
PSZ-AC_9:9, !- AirLoop Name
Sensible, !- Type of Load to Size On
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
1.0000, !- Central Heating Maximum System Air Flow Ratio
7.0, !- Preheat Design Temperature {C}
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Precool Design Temperature {C}
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Central Cooling Design Supply Air Temperature {C}
40.0, !- Central Heating Design Supply Air Temperature {C}
Coincident, !- Type of Zone Sum to Use
No, !- 100% Outdoor Air in Cooling
No, !- 100% Outdoor Air in Heating
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
DesignDay, !- Cooling Supply Air Flow Rate Method
0.0, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
DesignDay, !- Heating Supply Air Flow Rate Method
0.0, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
ZoneSum, !- System Outdoor Air Method
1.0, !- Zone Maximum Outdoor Air Fraction
CoolingDesignCapacity, !- Cooling Design Capacity Method
autosize, !- Cooling Design Capacity {W}
, !- Cooling Design Capacity Per Floor Area {W/m2}
, !- Fraction of Autosized Cooling Design Capacity
HeatingDesignCapacity, !- Heating Design Capacity Method
autosize, !- Heating Design Capacity {W}
, !- Heating Design Capacity Per Floor Area {W/m2}
, !- Fraction of Autosized Heating Design Capacity
OnOff; !- Central Cooling Capacity Control Method
AvailabilityManagerAssignmentList,
PSZ-AC_9:9 Availability Manager List, !- Name
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
PSZ-AC_9:9 Availability Manager; !- Availability Manager 1 Name
AvailabilityManager:NightCycle,
PSZ-AC_9:9 Availability Manager, !- Name
Always_On, !- Applicability Schedule Name
Type3_FAN_SCH, !- Fan Schedule Name
CycleOnAny, !- Control Type
1.0, !- Thermostat Tolerance {deltaC}
FixedRunTime, !- Cycling Run Time Control Type
1800; !- Cycling Run Time {s}
BranchList,
PSZ-AC_9:9 Air Loop Branches, !- Name
PSZ-AC_9:9 Air Loop Main Branch; !- Branch 1 Name
Branch,
PSZ-AC_9:9 Air Loop Main Branch, !- Name
, !- Pressure Drop Curve Name
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
PSZ-AC_9:9_OA, !- Component 1 Name
PSZ-AC_9:9 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
PSZ-AC_9:9_OA-PSZ-AC_9:9_Unitary_PackageNode, !- Component 1 Outlet Node Name
AirLoopHVAC:UnitarySystem, !- Component 2 Object Type
PSZ-AC_9:9_Unitary_Package_DX, !- Component 2 Name
PSZ-AC_9:9_OA-PSZ-AC_9:9_Unitary_PackageNode, !- Component 2 Inlet Node Name
PSZ-AC_9:9 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name
AirLoopHVAC:ControllerList,
PSZ-AC_9:9_OA_Controllers, !- Name
Controller:OutdoorAir, !- Controller 1 Object Type
PSZ-AC_9:9_OA_Controller;!- Controller 1 Name
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
PSZ-AC_9:9_OA_Equipment, !- Name
OutdoorAir:Mixer, !- Component 1 Object Type
PSZ-AC_9:9_OAMixing Box; !- Component 1 Name
AirLoopHVAC:OutdoorAirSystem,
PSZ-AC_9:9_OA, !- Name
PSZ-AC_9:9_OA_Controllers, !- Controller List Name
PSZ-AC_9:9_OA_Equipment, !- Outdoor Air Equipment List Name
PSZ-AC_9:9 Availability Manager List; !- Availability Manager List Name
OutdoorAir:NodeList,
PSZ-AC_9:9_OANode List; !- Node or NodeList Name 1
NodeList,
PSZ-AC_9:9_OANode List, !- Name
PSZ-AC_9:9_OAInlet Node; !- Node 1 Name
OutdoorAir:Mixer,
PSZ-AC_9:9_OAMixing Box, !- Name
PSZ-AC_9:9_OA-PSZ-AC_9:9_Unitary_PackageNode, !- Mixed Air Node Name
PSZ-AC_9:9_OAInlet Node, !- Outdoor Air Stream Node Name
PSZ-AC_9:9_OARelief Node,!- Relief Air Stream Node Name
PSZ-AC_9:9 Supply Equipment Inlet Node; !- Return Air Stream Node Name
SetpointManager:MixedAir,
PSZ-AC_9:9_OAMixed Air Temp Manager, !- Name
Temperature, !- Control Variable
PSZ-AC_9:9 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
PSZ-AC_9:9_OA-PSZ-AC_9:9_Unitary_PackageNode, !- Fan Inlet Node Name
PSZ-AC_9:9_Unitary_PackageHeatCoil air inlet, !- Fan Outlet Node Name
PSZ-AC_9:9_OA-PSZ-AC_9:9_Unitary_PackageNode; !- Setpoint Node or NodeList Name
Controller:OutdoorAir,
PSZ-AC_9:9_OA_Controller,!- Name
PSZ-AC_9:9_OARelief Node,!- Relief Air Outlet Node Name
PSZ-AC_9:9 Supply Equipment Inlet Node, !- Return Air Node Name
PSZ-AC_9:9_OA-PSZ-AC_9:9_Unitary_PackageNode, !- Mixed Air Node Name
PSZ-AC_9:9_OAInlet Node, !- Actuator Node Name
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
DifferentialDryBulb, !- Economizer Control Type
ModulateFlow, !- Economizer Control Action Type
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
, !- Economizer Maximum Limit Dewpoint Temperature {C}
, !- Electronic Enthalpy Limit Curve Name
0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
LockoutWithHeating, !- Lockout Type
FixedMinimum, !- Minimum Limit Type
Type3_MinOA_MotorizedDamper_SCH, !- Minimum Outdoor Air Schedule Name
, !- Minimum Fraction of Outdoor Air Schedule Name
SZ_system_OA_Max_Frac_SCH; !- Maximum Fraction of Outdoor Air Schedule Name
AirLoopHVAC:UnitarySystem,
PSZ-AC_9:9_Unitary_Package_DX, !- Name
Load, !- Control Type
SMstore7, !- Controlling Zone or Thermostat Location
None, !- Dehumidification Control Type
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC_9:9_OA-PSZ-AC_9:9_Unitary_PackageNode, !- Air Inlet Node Name
PSZ-AC_9:9 Supply Equipment Outlet Node, !- Air Outlet Node Name
Fan:SystemModel, !- Supply Fan Object Type
PSZ-AC_9:9_addAQ_Unitary_Package_fan, !- Supply Fan Name
BlowThrough, !- Fan Placement
Type3_FAN_SCH, !- Supply Air Fan Operating Mode Schedule Name
Coil:Heating:Fuel, !- Heating Coil Object Type
PSZ-AC_9:9_Unitary_Package_HeatCoil, !- Heating Coil Name
1, !- DX Heating Coil Sizing Ratio
Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type
PSZ-AC_9:9_Unitary_Package_CoolCoil, !- Cooling Coil Name
No, !- Use DOAS DX Cooling Coil
2, !- Minimum Supply Air Temperature {C}
SensibleOnlyLoadControl, !- Latent Load Control
, !- Supplemental Heating Coil Object Type
, !- Supplemental Heating Coil Name
SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method
AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method
AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method
AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s}
, !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- No Load Fraction of Autosized Cooling Supply Air Flow Rate
, !- No Load Fraction of Autosized Heating Supply Air Flow Rate
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W}
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W}
AUTOSIZE, !- Maximum Supply Air Temperature {C}
, !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C}
, !- Outdoor Dry-Bulb Temperature Sensor Node Name
, !- Maximum Cycling Rate {cycles/hr}
, !- Heat Pump Time Constant {s}
, !- Fraction of On-Cycle Power Use
, !- Heat Pump Fan Delay Time {s}
, !- Ancillary On-Cycle Electric Power {W}
, !- Ancillary Off-Cycle Electric Power {W}
, !- Design Heat Recovery Water Flow Rate {m3/s}
, !- Maximum Temperature for Heat Recovery {C}
, !- Heat Recovery Water Inlet Node Name
, !- Heat Recovery Water Outlet Node Name
UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type
PSZ-AC_9:9_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name
UnitarySystemPerformance:Multispeed,
PSZ-AC_9:9_Unitary_Package_DX_Perf, !- Name
2, !- Number of Speeds for Heating
2, !- Number of Speeds for Cooling
No, !- Single Mode Operation
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
1, !- Heating Speed 1 Supply Air Flow Ratio
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
1, !- Heating Speed 2 Supply Air Flow Ratio
1; !- Cooling Speed 2 Supply Air Flow Ratio
Fan:SystemModel,
PSZ-AC_9:9_addAQ_Unitary_Package_fan, !- Name
Type3_FAN_SCH, !- Availability Schedule Name
PSZ-AC_9:9_OA-PSZ-AC_9:9_Unitary_PackageNode, !- Air Inlet Node Name
PSZ-AC_9:9_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name
AUTOSIZE, !- Design Maximum Air Flow Rate
Discrete, !- Speed Control Method
1, !- Electric Power Minimum Flow Rate Fraction
622.5, !- Design Pressure Rise {Pa}
0.865, !- Motor Efficiency
1.0, ! Motor In Air Stream Fraction
AUTOSIZE, !- Design Electric Power Consumption
TotalEfficiencyAndPressure, !- Design Power Sizing Method
, !- Electric Power Per Unit Flow Rate
, !- Electric Power Per Unit Flow Rate Per Pressure
0.56225, !- Fan Total Efficiency
, !- Electric Power Function of Flow Fraction Curve Name
622.5, !- Night Ventilation Mode Pressure Rise
, !- Night Ventilation Mode Flow Fraction
, !- Motor Loss Zone Name
, !- Motor Loss Radiative Fraction
General, !- End-Use Subcategory
2, !- Number of Speeds
0.66, !- Speed Flow Fraction
0.4, !- Electric Power Fraction
1, !- Speed Flow Fraction
1; !- Electric Power Fraction
Coil:Heating:Fuel,
PSZ-AC_9:9_Unitary_Package_HeatCoil, !- Name
ALWAYS_ON, !- Availability Schedule Name
NaturalGas, !- Fuel Type
0.81, !- Burner Efficiency
AUTOSIZE, !- Nominal Capacity {W}
PSZ-AC_9:9_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name
PSZ-AC_9:9_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name
; !- Temperature Setpoint Node Name
Coil:Cooling:DX:MultiSpeed,
PSZ-AC_9:9_Unitary_Package_CoolCoil, !- Name
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC_9:9_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name
PSZ-AC_9:9 Supply Equipment Outlet Node, !- Air Outlet Node Name
, !- Condenser Air Inlet Node Name
AirCooled, !- Condenser Type
, !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C}
, !- Supply Water Storage Tank Name
, !- Condensate Collection Water Storage Tank Name
No, !- Apply Part Load Fraction to Speeds Greater than 1
No, !- Apply Latent Degradation to Speeds Greater than 1
, !- Crankcase Heater Capacity {W}
10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C}
, !- Basin Heater Capacity {W/K}
2, !- Basin Heater Setpoint Temperature {C}
, !- Basin Heater Operating Schedule Name
Electricity, !- Fuel Type
2, !- Number of Speeds
10220.07, !- Speed 1 Gross Rated Total Cooling Capacity {W}
0.68399, !- Speed 1 Gross Rated Sensible Heat Ratio
3.7988306741603, !- Speed 1 Gross Rated Cooling COP {W/W}
0.566453333333333, !- Speed 1 Rated Air Flow Rate {m3/s}
0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 1 Total Cooling Capacity Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 1 Total Cooling Capacity Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 1 Energy Input Ratio Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 1 Energy Input Ratio Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 1 Part Load Fraction Correlation Curve Name
, !- Speed 1 Nominal Time for Condensate Removal to Begin {s}
, !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless}
, !- Speed 1 Maximum Cycling Rate {cycles/hr}
, !- Speed 1 Latent Capacity Time Constant {s}
0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless}
, !- Speed 1 Waste Heat Function of Temperature Curve Name
0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless}
, !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s}
, !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W}
20440.14, !- Speed 2 Gross Rated Total Cooling Capacity {W}
0.68399, !- Speed 2 Gross Rated Sensible Heat Ratio
3.7988306741603, !- Speed 2 Gross Rated Cooling COP {W/W}
0.84968, !- Speed 2 Rated Air Flow Rate {m3/s}
0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 2 Total Cooling Capacity Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 2 Total Cooling Capacity Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 2 Energy Input Ratio Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 2 Energy Input Ratio Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 2 Part Load Fraction Correlation Curve Name
, !- Speed 2 Nominal Time for Condensate Removal to Begin {s}
, !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless}
, !- Speed 2 Maximum Cycling Rate {cycles/hr}
, !- Speed 2 Latent Capacity Time Constant {s}
0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless}
, !- Speed 2 Waste Heat Function of Temperature Curve Name
0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless}
, !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s}
; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W}
Curve:Biquadratic,
PSZ-AC_9:9_Unitary_PackagecoolCapFT, !- Name
0.766956, !- Coefficient1 Constant
0.0107756, !- Coefficient2 x
-0.0000414703, !- Coefficient3 x**2
0.00134961, !- Coefficient4 y
-0.000261144, !- Coefficient5 y**2
0.000457488, !- Coefficient6 x*y
12.77778, !- Minimum Value of x
23.88889, !- Maximum Value of x
21.11111, !- Minimum Value of y
46.11111; !- Maximum Value of y
Curve:Biquadratic,
PSZ-AC_9:9_Unitary_PackagecoolEIRFT, !- Name
0.297145, !- Coefficient1 Constant
0.0430933, !- Coefficient2 x
-0.000748766, !- Coefficient3 x**2
0.00597727, !- Coefficient4 y
0.000482112, !- Coefficient5 y**2
-0.000956448, !- Coefficient6 x*y
12.77778, !- Minimum Value of x
23.88889, !- Maximum Value of x
21.11111, !- Minimum Value of y
46.11111; !- Maximum Value of y
Curve:Quadratic,
PSZ-AC_9:9_Unitary_PackagecoolFFF, !- Name
0.8, !- Coefficient1 Constant
0.2, !- Coefficient2 x
0.0, !- Coefficient3 x**2
0.5, !- Minimum Value of x
1.5; !- Maximum Value of x
Curve:Quadratic,
PSZ-AC_9:9_Unitary_PackagecoolEIRFFF, !- Name
1.156, !- Coefficient1 Constant
-0.1816, !- Coefficient2 x
0.0256, !- Coefficient3 x**2
0.5, !- Minimum Value of x
1.5; !- Maximum Value of x
Curve:Quadratic,
PSZ-AC_9:9_Unitary_PackagecoolPLR, !- Name
0.75, !- Coefficient1 Constant
0.25, !- Coefficient2 x
0.0, !- Coefficient3 x**2
0.0, !- Minimum Value of x
1.0; !- Maximum Value of x
AirLoopHVAC:SupplyPath,
PSZ-AC_9:9, !- Name
PSZ-AC_9:9 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
PSZ-AC_9:9 Supply Air Splitter; !- Component 1 Name
AirLoopHVAC:ZoneSplitter,
PSZ-AC_9:9 Supply Air Splitter, !- Name
PSZ-AC_9:9 Zone Equipment Inlet Node, !- Inlet Node Name
SMstore7 Direct Air Inlet Node Name; !- Outlet 1 Node Name
AirLoopHVAC:ReturnPath,
PSZ-AC_9:9 Return Air Path, !- Name
PSZ-AC_9:9 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
PSZ-AC_9:9 Return Air Mixer; !- Component 1 Name
AirLoopHVAC:ZoneMixer,
PSZ-AC_9:9 Return Air Mixer, !- Name
PSZ-AC_9:9 Zone Equipment Outlet Node, !- Outlet Node Name
SMstore7 Return Air Node Name; !- Inlet 1 Node Name
AirLoopHVAC,
PSZ-AC_10:10, !- Name
, !- Controller List Name
PSZ-AC_10:10 Availability Manager List, !- Availability Manager List Name
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
PSZ-AC_10:10 Air Loop Branches, !- Branch List Name
, !- Connector List Name
PSZ-AC_10:10 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
PSZ-AC_10:10 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
PSZ-AC_10:10 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
PSZ-AC_10:10 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
Sizing:System,
PSZ-AC_10:10, !- AirLoop Name
Sensible, !- Type of Load to Size On
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
1.0000, !- Central Heating Maximum System Air Flow Ratio
7.0, !- Preheat Design Temperature {C}
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Precool Design Temperature {C}
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
12.8000, !- Central Cooling Design Supply Air Temperature {C}
40.0, !- Central Heating Design Supply Air Temperature {C}
Coincident, !- Type of Zone Sum to Use
No, !- 100% Outdoor Air in Cooling
No, !- 100% Outdoor Air in Heating
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
0.008, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
DesignDay, !- Cooling Supply Air Flow Rate Method
0.0, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
DesignDay, !- Heating Supply Air Flow Rate Method
0.0, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
ZoneSum, !- System Outdoor Air Method
1.0, !- Zone Maximum Outdoor Air Fraction
CoolingDesignCapacity, !- Cooling Design Capacity Method
autosize, !- Cooling Design Capacity {W}
, !- Cooling Design Capacity Per Floor Area {W/m2}
, !- Fraction of Autosized Cooling Design Capacity
HeatingDesignCapacity, !- Heating Design Capacity Method
autosize, !- Heating Design Capacity {W}
, !- Heating Design Capacity Per Floor Area {W/m2}
, !- Fraction of Autosized Heating Design Capacity
OnOff; !- Central Cooling Capacity Control Method
AvailabilityManagerAssignmentList,
PSZ-AC_10:10 Availability Manager List, !- Name
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
PSZ-AC_10:10 Availability Manager; !- Availability Manager 1 Name
AvailabilityManager:NightCycle,
PSZ-AC_10:10 Availability Manager, !- Name
Always_On, !- Applicability Schedule Name
Type3_FAN_SCH, !- Fan Schedule Name
CycleOnAny, !- Control Type
1.0, !- Thermostat Tolerance {deltaC}
FixedRunTime, !- Cycling Run Time Control Type
1800; !- Cycling Run Time {s}
BranchList,
PSZ-AC_10:10 Air Loop Branches, !- Name
PSZ-AC_10:10 Air Loop Main Branch; !- Branch 1 Name
Branch,
PSZ-AC_10:10 Air Loop Main Branch, !- Name
, !- Pressure Drop Curve Name
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
PSZ-AC_10:10_OA, !- Component 1 Name
PSZ-AC_10:10 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
PSZ-AC_10:10_OA-PSZ-AC_10:10_Unitary_PackageNode, !- Component 1 Outlet Node Name
AirLoopHVAC:UnitarySystem, !- Component 2 Object Type
PSZ-AC_10:10_Unitary_Package_DX, !- Component 2 Name
PSZ-AC_10:10_OA-PSZ-AC_10:10_Unitary_PackageNode, !- Component 2 Inlet Node Name
PSZ-AC_10:10 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name
AirLoopHVAC:ControllerList,
PSZ-AC_10:10_OA_Controllers, !- Name
Controller:OutdoorAir, !- Controller 1 Object Type
PSZ-AC_10:10_OA_Controller; !- Controller 1 Name
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
PSZ-AC_10:10_OA_Equipment, !- Name
OutdoorAir:Mixer, !- Component 1 Object Type
PSZ-AC_10:10_OAMixing Box; !- Component 1 Name
AirLoopHVAC:OutdoorAirSystem,
PSZ-AC_10:10_OA, !- Name
PSZ-AC_10:10_OA_Controllers, !- Controller List Name
PSZ-AC_10:10_OA_Equipment, !- Outdoor Air Equipment List Name
PSZ-AC_10:10 Availability Manager List; !- Availability Manager List Name
OutdoorAir:NodeList,
PSZ-AC_10:10_OANode List;!- Node or NodeList Name 1
NodeList,
PSZ-AC_10:10_OANode List,!- Name
PSZ-AC_10:10_OAInlet Node; !- Node 1 Name
OutdoorAir:Mixer,
PSZ-AC_10:10_OAMixing Box, !- Name
PSZ-AC_10:10_OA-PSZ-AC_10:10_Unitary_PackageNode, !- Mixed Air Node Name
PSZ-AC_10:10_OAInlet Node, !- Outdoor Air Stream Node Name
PSZ-AC_10:10_OARelief Node, !- Relief Air Stream Node Name
PSZ-AC_10:10 Supply Equipment Inlet Node; !- Return Air Stream Node Name
SetpointManager:MixedAir,
PSZ-AC_10:10_OAMixed Air Temp Manager, !- Name
Temperature, !- Control Variable
PSZ-AC_10:10 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
PSZ-AC_10:10_OA-PSZ-AC_10:10_Unitary_PackageNode, !- Fan Inlet Node Name
PSZ-AC_10:10_Unitary_PackageHeatCoil air inlet, !- Fan Outlet Node Name
PSZ-AC_10:10_OA-PSZ-AC_10:10_Unitary_PackageNode; !- Setpoint Node or NodeList Name
Controller:OutdoorAir,
PSZ-AC_10:10_OA_Controller, !- Name
PSZ-AC_10:10_OARelief Node, !- Relief Air Outlet Node Name
PSZ-AC_10:10 Supply Equipment Inlet Node, !- Return Air Node Name
PSZ-AC_10:10_OA-PSZ-AC_10:10_Unitary_PackageNode, !- Mixed Air Node Name
PSZ-AC_10:10_OAInlet Node, !- Actuator Node Name
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
DifferentialDryBulb, !- Economizer Control Type
ModulateFlow, !- Economizer Control Action Type
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
, !- Economizer Maximum Limit Dewpoint Temperature {C}
, !- Electronic Enthalpy Limit Curve Name
0.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
LockoutWithHeating, !- Lockout Type
FixedMinimum, !- Minimum Limit Type
Type3_MinOA_MotorizedDamper_SCH, !- Minimum Outdoor Air Schedule Name
, !- Minimum Fraction of Outdoor Air Schedule Name
SZ_system_OA_Max_Frac_SCH; !- Maximum Fraction of Outdoor Air Schedule Name
AirLoopHVAC:UnitarySystem,
PSZ-AC_10:10_Unitary_Package_DX, !- Name
Load, !- Control Type
SMstore8, !- Controlling Zone or Thermostat Location
None, !- Dehumidification Control Type
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC_10:10_OA-PSZ-AC_10:10_Unitary_PackageNode, !- Air Inlet Node Name
PSZ-AC_10:10 Supply Equipment Outlet Node, !- Air Outlet Node Name
Fan:SystemModel, !- Supply Fan Object Type
PSZ-AC_10:10_addAQ_Unitary_Package_fan, !- Supply Fan Name
BlowThrough, !- Fan Placement
Type3_FAN_SCH, !- Supply Air Fan Operating Mode Schedule Name
Coil:Heating:Fuel, !- Heating Coil Object Type
PSZ-AC_10:10_Unitary_Package_HeatCoil, !- Heating Coil Name
1, !- DX Heating Coil Sizing Ratio
Coil:Cooling:DX:MultiSpeed, !- Cooling Coil Object Type
PSZ-AC_10:10_Unitary_Package_CoolCoil, !- Cooling Coil Name
No, !- Use DOAS DX Cooling Coil
2, !- Minimum Supply Air Temperature {C}
SensibleOnlyLoadControl, !- Latent Load Control
, !- Supplemental Heating Coil Object Type
, !- Supplemental Heating Coil Name
SupplyAirFlowRate, !- Cooling Supply Air Flow Rate Method
AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s}
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
, !- Cooling Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
SupplyAirFlowRate, !- Heating Supply Air Flow Rate Method
AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s}
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
, !- Heating Supply Air Flow Rate Per Unit of Capacity {m3/s-W}
SupplyAirFlowRate, !- No Load Supply Air Flow Rate Method
AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s}
, !- No Load Supply Air Flow Rate Per Floor Area {m3/s-m2}
, !- No Load Fraction of Autosized Cooling Supply Air Flow Rate
, !- No Load Fraction of Autosized Heating Supply Air Flow Rate
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Cooling Operation {m3/s-W}
, !- No Load Supply Air Flow Rate Per Unit of Capacity During Heating Operation {m3/s-W}
AUTOSIZE, !- Maximum Supply Air Temperature {C}
, !- Maximum Outdoor Dry-Bulb Temperature for Supplemental Heater Operation {C}
, !- Outdoor Dry-Bulb Temperature Sensor Node Name
, !- Maximum Cycling Rate {cycles/hr}
, !- Heat Pump Time Constant {s}
, !- Fraction of On-Cycle Power Use
, !- Heat Pump Fan Delay Time {s}
, !- Ancillary On-Cycle Electric Power {W}
, !- Ancillary Off-Cycle Electric Power {W}
, !- Design Heat Recovery Water Flow Rate {m3/s}
, !- Maximum Temperature for Heat Recovery {C}
, !- Heat Recovery Water Inlet Node Name
, !- Heat Recovery Water Outlet Node Name
UnitarySystemPerformance:Multispeed, !- Design Specification Multispeed Object Type
PSZ-AC_10:10_Unitary_Package_DX_Perf; !- Design Specification Multispeed Object Name
UnitarySystemPerformance:Multispeed,
PSZ-AC_10:10_Unitary_Package_DX_Perf, !- Name
2, !- Number of Speeds for Heating
2, !- Number of Speeds for Cooling
No, !- Single Mode Operation
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
1, !- Heating Speed 1 Supply Air Flow Ratio
0.66, !- No Load or Cooling Speed 1 Supply Air Flow Rate Ratio
1, !- Heating Speed 2 Supply Air Flow Ratio
1; !- Cooling Speed 2 Supply Air Flow Ratio
Fan:SystemModel,
PSZ-AC_10:10_addAQ_Unitary_Package_fan, !- Name
Type3_FAN_SCH, !- Availability Schedule Name
PSZ-AC_10:10_OA-PSZ-AC_10:10_Unitary_PackageNode, !- Air Inlet Node Name
PSZ-AC_10:10_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name
AUTOSIZE, !- Design Maximum Air Flow Rate
Discrete, !- Speed Control Method
1, !- Electric Power Minimum Flow Rate Fraction
622.5, !- Design Pressure Rise {Pa}
0.865, !- Motor Efficiency
1.0, ! Motor In Air Stream Fraction
AUTOSIZE, !- Design Electric Power Consumption
TotalEfficiencyAndPressure, !- Design Power Sizing Method
, !- Electric Power Per Unit Flow Rate
, !- Electric Power Per Unit Flow Rate Per Pressure
0.56225, !- Fan Total Efficiency
, !- Electric Power Function of Flow Fraction Curve Name
622.5, !- Night Ventilation Mode Pressure Rise
, !- Night Ventilation Mode Flow Fraction
, !- Motor Loss Zone Name
, !- Motor Loss Radiative Fraction
General, !- End-Use Subcategory
2, !- Number of Speeds
0.66, !- Speed Flow Fraction
0.4, !- Electric Power Fraction
1, !- Speed Flow Fraction
1; !- Electric Power Fraction
Coil:Heating:Fuel,
PSZ-AC_10:10_Unitary_Package_HeatCoil, !- Name
ALWAYS_ON, !- Availability Schedule Name
NaturalGas, !- Fuel Type
0.81, !- Burner Efficiency
AUTOSIZE, !- Nominal Capacity {W}
PSZ-AC_10:10_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name
PSZ-AC_10:10_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name
; !- Temperature Setpoint Node Name
Coil:Cooling:DX:MultiSpeed,
PSZ-AC_10:10_Unitary_Package_CoolCoil, !- Name
ALWAYS_ON, !- Availability Schedule Name
PSZ-AC_10:10_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name
PSZ-AC_10:10 Supply Equipment Outlet Node, !- Air Outlet Node Name
, !- Condenser Air Inlet Node Name
AirCooled, !- Condenser Type
, !- Minimum Outdoor Dry-Bulb Temperature for Compressor Operation {C}
, !- Supply Water Storage Tank Name
, !- Condensate Collection Water Storage Tank Name
No, !- Apply Part Load Fraction to Speeds Greater than 1
No, !- Apply Latent Degradation to Speeds Greater than 1
, !- Crankcase Heater Capacity {W}
10, !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C}
, !- Basin Heater Capacity {W/K}
2, !- Basin Heater Setpoint Temperature {C}
, !- Basin Heater Operating Schedule Name
Electricity, !- Fuel Type
2, !- Number of Speeds
11509.965, !- Speed 1 Gross Rated Total Cooling Capacity {W}
0.68430, !- Speed 1 Gross Rated Sensible Heat Ratio
3.7988306741603, !- Speed 1 Gross Rated Cooling COP {W/W}
0.63874, !- Speed 1 Rated Air Flow Rate {m3/s}
0, !- Speed 1 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 1 Total Cooling Capacity Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 1 Total Cooling Capacity Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 1 Energy Input Ratio Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 1 Energy Input Ratio Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 1 Part Load Fraction Correlation Curve Name
, !- Speed 1 Nominal Time for Condensate Removal to Begin {s}
, !- Speed 1 Ratio of Initial Moisture Evaporation Rate and Steady State Latent Capacity {dimensionless}
, !- Speed 1 Maximum Cycling Rate {cycles/hr}
, !- Speed 1 Latent Capacity Time Constant {s}
0.2, !- Speed 1 Rated Waste Heat Fraction of Power Input {dimensionless}
, !- Speed 1 Waste Heat Function of Temperature Curve Name
0.9, !- Speed 1 Evaporative Condenser Effectiveness {dimensionless}
, !- Speed 1 Evaporative Condenser Air Flow Rate {m3/s}
, !- Speed 1 Rated Evaporative Condenser Pump Power Consumption {W}
23019.93, !- Speed 2 Gross Rated Total Cooling Capacity {W}
0.68430, !- Speed 2 Gross Rated Sensible Heat Ratio
3.7988306741603, !- Speed 2 Gross Rated Cooling COP {W/W}
0.95811, !- Speed 2 Rated Air Flow Rate {m3/s}
0, !- Speed 2 Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
PSZ-AC_Unitary_PackagecoolCapFT, !- Speed 2 Total Cooling Capacity Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolFFF, !- Speed 2 Total Cooling Capacity Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolEIRFT, !- Speed 2 Energy Input Ratio Function of Temperature Curve Name
PSZ-AC_Unitary_PackagecoolEIRFFF, !- Speed 2 Energy Input Ratio Function of Flow Fraction Curve Name
PSZ-AC_Unitary_PackagecoolPLR, !- Speed 2 Part Load Fraction Correlation Curve Name
, !- Speed 2 Nominal Time for Condensate Removal to Begin {s}
, !- Speed 2 Ratio of Initial Moisture Evaporation Rate and steady state Latent Capacity {dimensionless}
, !- Speed 2 Maximum Cycling Rate {cycles/hr}
, !- Speed 2 Latent Capacity Time Constant {s}
0.2, !- Speed 2 Rated Waste Heat Fraction of Power Input {dimensionless}
, !- Speed 2 Waste Heat Function of Temperature Curve Name
0.9, !- Speed 2 Evaporative Condenser Effectiveness {dimensionless}
, !- Speed 2 Evaporative Condenser Air Flow Rate {m3/s}
; !- Speed 2 Rated Evaporative Condenser Pump Power Consumption {W}
Curve:Biquadratic,
PSZ-AC_10:10_Unitary_PackagecoolCapFT, !- Name
0.766956, !- Coefficient1 Constant
0.0107756, !- Coefficient2 x
-0.0000414703, !- Coefficient3 x**2
0.00134961, !- Coefficient4 y
-0.000261144, !- Coefficient5 y**2
0.000457488, !- Coefficient6 x*y
12.77778, !- Minimum Value of x
23.88889, !- Maximum Value of x
21.11111, !- Minimum Value of y
46.11111; !- Maximum Value of y
Curve:Biquadratic,
PSZ-AC_10:10_Unitary_PackagecoolEIRFT, !- Name
0.297145, !- Coefficient1 Constant
0.0430933, !- Coefficient2 x
-0.000748766, !- Coefficient3 x**2
0.00597727, !- Coefficient4 y
0.000482112, !- Coefficient5 y**2
-0.000956448, !- Coefficient6 x*y
12.77778, !- Minimum Value of x
23.88889, !- Maximum Value of x
21.11111, !- Minimum Value of y
46.11111; !- Maximum Value of y
Curve:Quadratic,
PSZ-AC_10:10_Unitary_PackagecoolFFF, !- Name
0.8, !- Coefficient1 Constant
0.2, !- Coefficient2 x
0.0, !- Coefficient3 x**2
0.5, !- Minimum Value of x
1.5; !- Maximum Value of x
Curve:Quadratic,
PSZ-AC_10:10_Unitary_PackagecoolEIRFFF, !- Name
1.156, !- Coefficient1 Constant
-0.1816, !- Coefficient2 x
0.0256, !- Coefficient3 x**2
0.5, !- Minimum Value of x
1.5; !- Maximum Value of x
Curve:Quadratic,
PSZ-AC_10:10_Unitary_PackagecoolPLR, !- Name
0.75, !- Coefficient1 Constant
0.25, !- Coefficient2 x
0.0, !- Coefficient3 x**2
0.0, !- Minimum Value of x
1.0; !- Maximum Value of x
AirLoopHVAC:SupplyPath,
PSZ-AC_10:10, !- Name
PSZ-AC_10:10 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
PSZ-AC_10:10 Supply Air Splitter; !- Component 1 Name
AirLoopHVAC:ZoneSplitter,
PSZ-AC_10:10 Supply Air Splitter, !- Name
PSZ-AC_10:10 Zone Equipment Inlet Node, !- Inlet Node Name
SMstore8 Direct Air Inlet Node Name; !- Outlet 1 Node Name
AirLoopHVAC:ReturnPath,
PSZ-AC_10:10 Return Air Path, !- Name
PSZ-AC_10:10 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
PSZ-AC_10:10 Return Air Mixer; !- Component 1 Name
AirLoopHVAC:ZoneMixer,
PSZ-AC_10:10 Return Air Mixer, !- Name
PSZ-AC_10:10 Zone Equipment Outlet Node, !- Outlet Node Name
SMstore8 Return Air Node Name; !- Inlet 1 Node Name
!- =========== ALL OBJECTS IN CLASS: WATER HEATER:MIXED ===========
WaterHeater:Mixed,
Gas Tank1, !- Name
0.1514, !- Tank Volume {m3}
Hot Water Setpoint Temp Schedule, !- Setpoint Temperature Schedule Name
2.00000005298191, !- Deadband Temperature Difference {deltaC}
82.2222244003673, !- Maximum Temperature Limit {C}
Cycle, !- Heater Control Type
11722.84, !- Heater Maximum Capacity {W}
0, !- Heater Minimum Capacity {W}
, !- Heater Ignition Minimum Flow Rate {m3/s}
, !- Heater Ignition Delay {s}
Electricity, !- Heater Fuel Type
1, !- Heater Thermal Efficiency
, !- Part Load Factor Curve Name
173, !- Off Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 31, 2012 Specify pipe loss for both Off and On cycle parasitic
Electricity, !- Off Cycle Parasitic Fuel Type
0, !- Off Cycle Parasitic Heat Fraction to Tank
173, !- On Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 2, 2012: change from blank to 72 btu/h (21.20 W)
, !- On Cycle Parasitic Fuel Type
, !- On Cycle Parasitic Heat Fraction to Tank
Zone, !- Ambient Temperature Indicator
, !- Ambient Temperature Schedule Name
LGstore1, !- Ambient Temperature Zone Name
, !- Ambient Temperature Outdoor Air Node Name
1.205980747, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K}
, !- Off Cycle Loss Fraction to Zone
1.205980747, !- On Cycle Loss Coefficient to Ambient Temperature {W/K}
, !- On Cycle Loss Fraction to Zone
1.89e-06, !- Peak Use Flow Rate {m3/s}
Type1_SWH_SCH; !- Use Flow Rate Fraction Schedule Name
!- =========== ALL OBJECTS IN CLASS: WATER HEATER:MIXED ===========
WaterHeater:Mixed,
Gas Tank2, !- Name
0.1514, !- Tank Volume {m3}
Hot Water Setpoint Temp Schedule, !- Setpoint Temperature Schedule Name
2.00000005298191, !- Deadband Temperature Difference {deltaC}
82.2222244003673, !- Maximum Temperature Limit {C}
Cycle, !- Heater Control Type
11722.84, !- Heater Maximum Capacity {W}
0, !- Heater Minimum Capacity {W}
, !- Heater Ignition Minimum Flow Rate {m3/s}
, !- Heater Ignition Delay {s}
Electricity, !- Heater Fuel Type
1, !- Heater Thermal Efficiency
, !- Part Load Factor Curve Name
173, !- Off Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 31, 2012 Specify pipe loss for both Off and On cycle parasitic
Electricity, !- Off Cycle Parasitic Fuel Type
0, !- Off Cycle Parasitic Heat Fraction to Tank
173, !- On Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 2, 2012: change from blank to 72 btu/h (21.20 W)
, !- On Cycle Parasitic Fuel Type
, !- On Cycle Parasitic Heat Fraction to Tank
Zone, !- Ambient Temperature Indicator
, !- Ambient Temperature Schedule Name
SMstore1, !- Ambient Temperature Zone Name
, !- Ambient Temperature Outdoor Air Node Name
1.205980747, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K}
, !- Off Cycle Loss Fraction to Zone
1.205980747, !- On Cycle Loss Coefficient to Ambient Temperature {W/K}
, !- On Cycle Loss Fraction to Zone
1.89e-06, !- Peak Use Flow Rate {m3/s}
Type1_SWH_SCH; !- Use Flow Rate Fraction Schedule Name
!- =========== ALL OBJECTS IN CLASS: WATER HEATER:MIXED ===========
WaterHeater:Mixed,
Gas Tank3, !- Name
0.1514, !- Tank Volume {m3}
Hot Water Setpoint Temp Schedule, !- Setpoint Temperature Schedule Name
2.00000005298191, !- Deadband Temperature Difference {deltaC}
82.2222244003673, !- Maximum Temperature Limit {C}
Cycle, !- Heater Control Type
11722.84, !- Heater Maximum Capacity {W}
0, !- Heater Minimum Capacity {W}
, !- Heater Ignition Minimum Flow Rate {m3/s}
, !- Heater Ignition Delay {s}
Electricity, !- Heater Fuel Type
1, !- Heater Thermal Efficiency
, !- Part Load Factor Curve Name
173, !- Off Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 31, 2012 Specify pipe loss for both Off and On cycle parasitic
Electricity, !- Off Cycle Parasitic Fuel Type
0, !- Off Cycle Parasitic Heat Fraction to Tank
173, !- On Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 2, 2012: change from blank to 72 btu/h (21.20 W)
, !- On Cycle Parasitic Fuel Type
, !- On Cycle Parasitic Heat Fraction to Tank
Zone, !- Ambient Temperature Indicator
, !- Ambient Temperature Schedule Name
SMstore2, !- Ambient Temperature Zone Name
, !- Ambient Temperature Outdoor Air Node Name
1.205980747, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K}
, !- Off Cycle Loss Fraction to Zone
1.205980747, !- On Cycle Loss Coefficient to Ambient Temperature {W/K}
, !- On Cycle Loss Fraction to Zone
1.89e-06, !- Peak Use Flow Rate {m3/s}
Type2_SWH_SCH; !- Use Flow Rate Fraction Schedule Name
!- =========== ALL OBJECTS IN CLASS: WATER HEATER:MIXED ===========
WaterHeater:Mixed,
Gas Tank4, !- Name
0.1514, !- Tank Volume {m3}
Hot Water Setpoint Temp Schedule, !- Setpoint Temperature Schedule Name
2.00000005298191, !- Deadband Temperature Difference {deltaC}
82.2222244003673, !- Maximum Temperature Limit {C}
Cycle, !- Heater Control Type
11722.84, !- Heater Maximum Capacity {W}
0, !- Heater Minimum Capacity {W}
, !- Heater Ignition Minimum Flow Rate {m3/s}
, !- Heater Ignition Delay {s}
Electricity, !- Heater Fuel Type
1, !- Heater Thermal Efficiency
, !- Part Load Factor Curve Name
173, !- Off Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 31, 2012 Specify pipe loss for both Off and On cycle parasitic
Electricity, !- Off Cycle Parasitic Fuel Type
0, !- Off Cycle Parasitic Heat Fraction to Tank
173, !- On Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 2, 2012: change from blank to 72 btu/h (21.20 W)
, !- On Cycle Parasitic Fuel Type
, !- On Cycle Parasitic Heat Fraction to Tank
Zone, !- Ambient Temperature Indicator
, !- Ambient Temperature Schedule Name
SMstore3, !- Ambient Temperature Zone Name
, !- Ambient Temperature Outdoor Air Node Name
1.205980747, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K}
, !- Off Cycle Loss Fraction to Zone
1.205980747, !- On Cycle Loss Coefficient to Ambient Temperature {W/K}
, !- On Cycle Loss Fraction to Zone
1.89e-06, !- Peak Use Flow Rate {m3/s}
Type2_SWH_SCH; !- Use Flow Rate Fraction Schedule Name
!- =========== ALL OBJECTS IN CLASS: WATER HEATER:MIXED ===========
WaterHeater:Mixed,
Gas Tank5, !- Name
0.1514, !- Tank Volume {m3}
Hot Water Setpoint Temp Schedule, !- Setpoint Temperature Schedule Name
2.00000005298191, !- Deadband Temperature Difference {deltaC}
82.2222244003673, !- Maximum Temperature Limit {C}
Cycle, !- Heater Control Type
11722.84, !- Heater Maximum Capacity {W}
0, !- Heater Minimum Capacity {W}
, !- Heater Ignition Minimum Flow Rate {m3/s}
, !- Heater Ignition Delay {s}
Electricity, !- Heater Fuel Type
1, !- Heater Thermal Efficiency
, !- Part Load Factor Curve Name
173, !- Off Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 31, 2012 Specify pipe loss for both Off and On cycle parasitic
Electricity, !- Off Cycle Parasitic Fuel Type
0, !- Off Cycle Parasitic Heat Fraction to Tank
173, !- On Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 2, 2012: change from blank to 72 btu/h (21.20 W)
, !- On Cycle Parasitic Fuel Type
, !- On Cycle Parasitic Heat Fraction to Tank
Zone, !- Ambient Temperature Indicator
, !- Ambient Temperature Schedule Name
LGstore2, !- Ambient Temperature Zone Name
, !- Ambient Temperature Outdoor Air Node Name
1.205980747, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K}
, !- Off Cycle Loss Fraction to Zone
1.205980747, !- On Cycle Loss Coefficient to Ambient Temperature {W/K}
, !- On Cycle Loss Fraction to Zone
1.89e-06, !- Peak Use Flow Rate {m3/s}
Type3_SWH_SCH; !- Use Flow Rate Fraction Schedule Name
!- =========== ALL OBJECTS IN CLASS: WATER HEATER:MIXED ===========
WaterHeater:Mixed,
Gas Tank6, !- Name
0.1514, !- Tank Volume {m3}
Hot Water Setpoint Temp Schedule, !- Setpoint Temperature Schedule Name
2.00000005298191, !- Deadband Temperature Difference {deltaC}
82.2222244003673, !- Maximum Temperature Limit {C}
Cycle, !- Heater Control Type
11722.84, !- Heater Maximum Capacity {W}
0, !- Heater Minimum Capacity {W}
, !- Heater Ignition Minimum Flow Rate {m3/s}
, !- Heater Ignition Delay {s}
Electricity, !- Heater Fuel Type
1, !- Heater Thermal Efficiency
, !- Part Load Factor Curve Name
173, !- Off Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 31, 2012 Specify pipe loss for both Off and On cycle parasitic
Electricity, !- Off Cycle Parasitic Fuel Type
0, !- Off Cycle Parasitic Heat Fraction to Tank
173, !- On Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 2, 2012: change from blank to 72 btu/h (21.20 W)
, !- On Cycle Parasitic Fuel Type
, !- On Cycle Parasitic Heat Fraction to Tank
Zone, !- Ambient Temperature Indicator
, !- Ambient Temperature Schedule Name
SMstore5, !- Ambient Temperature Zone Name
, !- Ambient Temperature Outdoor Air Node Name
1.205980747, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K}
, !- Off Cycle Loss Fraction to Zone
1.205980747, !- On Cycle Loss Coefficient to Ambient Temperature {W/K}
, !- On Cycle Loss Fraction to Zone
1.89e-06, !- Peak Use Flow Rate {m3/s}
Type3_SWH_SCH; !- Use Flow Rate Fraction Schedule Name
!- =========== ALL OBJECTS IN CLASS: WATER HEATER:MIXED ===========
WaterHeater:Mixed,
Gas Tank7, !- Name
0.1514, !- Tank Volume {m3}
Hot Water Setpoint Temp Schedule, !- Setpoint Temperature Schedule Name
2.00000005298191, !- Deadband Temperature Difference {deltaC}
82.2222244003673, !- Maximum Temperature Limit {C}
Cycle, !- Heater Control Type
11722.84, !- Heater Maximum Capacity {W}
0, !- Heater Minimum Capacity {W}
, !- Heater Ignition Minimum Flow Rate {m3/s}
, !- Heater Ignition Delay {s}
Electricity, !- Heater Fuel Type
1, !- Heater Thermal Efficiency
, !- Part Load Factor Curve Name
173, !- Off Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 31, 2012 Specify pipe loss for both Off and On cycle parasitic
Electricity, !- Off Cycle Parasitic Fuel Type
0, !- Off Cycle Parasitic Heat Fraction to Tank
173, !- On Cycle Parasitic Fuel Consumption Rate {W} (SWH Enhancement) August 2, 2012: change from blank to 72 btu/h (21.20 W)
, !- On Cycle Parasitic Fuel Type
, !- On Cycle Parasitic Heat Fraction to Tank
Zone, !- Ambient Temperature Indicator
, !- Ambient Temperature Schedule Name
SMstore6, !- Ambient Temperature Zone Name
, !- Ambient Temperature Outdoor Air Node Name
1.205980747, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K}
, !- Off Cycle Loss Fraction to Zone
1.205980747, !- On Cycle Loss Coefficient to Ambient Temperature {W/K}
, !- On Cycle Loss Fraction to Zone
1.89e-06, !- Peak Use Flow Rate {m3/s}
Type3_SWH_SCH; !- Use Flow Rate Fraction Schedule Name
Exterior:Lights,
Exterior_Lights_a, !- Name
Exterior_lighting_schedule_a, !- Schedule Name
418.4, !- Design Level {W}
AstronomicalClock, !- Control Option
General; !- End-Use Subcategory
Exterior:Lights,
Exterior_Lights_b, !- Name
Exterior_lighting_schedule_b_2016, !- Schedule Name
2520.304746, !- Design Level {W}
AstronomicalClock, !- Control Option
General; !- End-Use Subcategory
Exterior:Lights,
Exterior_Lights_c, !- Name
Exterior_lighting_schedule_c_2016, !- Schedule Name
2520.304746, !- Design Level {W}
AstronomicalClock, !- Control Option
General; !- End-Use Subcategory
Schedule:Compact,
Exterior_lighting_schedule_a, !- Name
fraction, !- Schedule Type Limits Name
Through:12/31, !- Field 1
For:AllDays, !- Field 2
Until: 06:00,0, !- Field 3
Until: 24:00,1; !- Field 5
Schedule:Compact,
Exterior_lighting_schedule_b, !- Name
fraction, !- Schedule Type Limits Name
Through:12/31, !- Field 1
For:AllDays, !- Field 2
Until: 06:00,0.7, !- Field 3
Until: 24:00,1; !- Field 5
Schedule:Compact,
Exterior_lighting_schedule_a_IECC2015, !- Name
fraction, !- Schedule Type Limits Name
Through:12/31, !- Field 1
For:Weekdays SummerDesignDay, !- Field 2
Until: 08:00,0, !- Field 3
Until: 24:00,1, !- Field 5
For:Saturdays, !- Field 7
Until: 01:00,1, !- Field 8
Until: 08:00,0, !- Field 10
Until: 24:00,1, !- Field 12
For:AllOtherDays, !- Field 14
Until: 9:00,0, !- Field 15
Until: 24:00,1; !- Field 17
Schedule:Compact,
Exterior_lighting_schedule_b_2016, !- Name
fraction, !- Schedule Type Limits Name
Through:12/31, !- Field 1
For:AllDays, !- Field 2
Until: 06:00,0.5, !- Field 3
Until: 24:00,1; !- Field 5
Schedule:Compact,
Exterior_lighting_schedule_c_2016, !- Name
fraction, !- Schedule Type Limits Name
Through:12/31, !- Field 1
For:AllDays, !- Field 2
Until: 06:00,0.5, !- Field 3
Until: 22:00,1, !- Field 5
Until: 24:00,0.5; !- Field 7
!No PV for this case
!- =========== ALL OBJECTS IN CLASS: OUTPUT:REPORTS ===========
Output:Surfaces:Drawing,DXF;
Output:Surfaces:List,Details;
Output:VariableDictionary,IDF;
Output:Constructions,Constructions;
OutputControl:Table:Style,
CommaAndHTML; !- Column Separator
!- =========== ALL OBJECTS IN CLASS: OUTPUTCONTROL:REPORTINGTOLERANCES ===========
Output:Meter:MeterFileOnly,Electricity:Facility,Hourly;
Output:Meter:MeterFileOnly,ElectricityNet:Facility,Hourly;
Output:Meter:MeterFileOnly,Gas:Facility,Hourly;
OutputControl:ReportingTolerances,
0.556, !- Tolerance for Time Heating Setpoint Not Met {deltaC}
0.556; !- Tolerance for Time Cooling Setpoint Not Met {deltaC}
Output:Table:SummaryReports,
AllSummaryAndMonthly; !- Report 1 Name
Output:Table:Monthly,
NameHolderMonthlySummary TaskPurpose ProgressIndicator, !- Name ProgressIndicator,ForDetermination2019, ...
3, !- Digits After Decimal
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
SumOrAverage, !- Aggregation Type for Variable or Meter 1
Heating:Gas, !- Variable or Meter 2 Name
SumOrAverage; !- Aggregation Type for Variable or Meter 2
Output:Table:Monthly,
NameHolderMonthlySummary CodeName ASHRAE901, !- Name ASHRAE901, ASHRAE1891, IECC, Title24, ORSC, IGCC, ...
3, !- Digits After Decimal
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
SumOrAverage, !- Aggregation Type for Variable or Meter 1
Heating:Gas, !- Variable or Meter 2 Name
SumOrAverage; !- Aggregation Type for Variable or Meter 2
Output:Table:Monthly,
NameHolderMonthlySummary CodeYear 2019, !- Name all years for ASHRAE90.1, IECC, ASHRAE189.1
3, !- Digits After Decimal
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
SumOrAverage, !- Aggregation Type for Variable or Meter 1
Heating:Gas, !- Variable or Meter 2 Name
SumOrAverage; !- Aggregation Type for Variable or Meter 2
Output:Table:Monthly,
NameHolderMonthlySummary CodeAmendment NoneAmend, !- Name StateAmend,EEM, NoneAmend for national or state without amendment
3, !- Digits After Decimal
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
SumOrAverage, !- Aggregation Type for Variable or Meter 1
Heating:Gas, !- Variable or Meter 2 Name
SumOrAverage; !- Aggregation Type for Variable or Meter 2
Output:Table:Monthly,
NameHolderMonthlySummary PrototypeName RetailStripmall, !- Name 16 Prototypes
3, !- Digits After Decimal
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
SumOrAverage, !- Aggregation Type for Variable or Meter 1
Heating:Gas, !- Variable or Meter 2 Name
SumOrAverage; !- Aggregation Type for Variable or Meter 2
Output:Table:Monthly,
NameHolderMonthlySummary TaskScope National, !- Name National, State, City
3, !- Digits After Decimal
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
SumOrAverage, !- Aggregation Type for Variable or Meter 1
Heating:Gas, !- Variable or Meter 2 Name
SumOrAverage; !- Aggregation Type for Variable or Meter 2
Output:Table:Monthly,
NameHolderMonthlySummary State National, !- Name National for national analysis, NewYork, Utah,... for state analysis, or city name for city analysis. Spell out the name of the state without space between words
3, !- Digits After Decimal
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
SumOrAverage, !- Aggregation Type for Variable or Meter 1
Heating:Gas, !- Variable or Meter 2 Name
SumOrAverage; !- Aggregation Type for Variable or Meter 2
Output:Table:Monthly,
NameHolderMonthlySummary ClimateZone 6A, !- Name 0-8
3, !- Digits After Decimal
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
SumOrAverage, !- Aggregation Type for Variable or Meter 1
Heating:Gas, !- Variable or Meter 2 Name
SumOrAverage; !- Aggregation Type for Variable or Meter 2
Output:Table:Monthly,
NameHolderMonthlySummary RepresentCity USA_MN_Rochester, !- Name representative city like Honolulu for national, for each state, for city analysis. this is not the city of the weather file. The weather city will be extracted from epw file
3, !- Digits After Decimal
Site Outdoor Air Drybulb, !- Variable or Meter 1 Name
SumOrAverage, !- Aggregation Type for Variable or Meter 1
Heating:Gas, !- Variable or Meter 2 Name
SumOrAverage; !- Aggregation Type for Variable or Meter 2
!- =========== ALL OBJECTS IN CLASS: OUTPUT:VARIABLE ===========
! ! Site
!
! Output:Variable,*,Site Outdoor Air Drybulb Temperature,Hourly;
!
! Output:Variable,*,Site Outdoor Air Wetbulb Temperature,Hourly;
!
! Output:Variable,Type1_FAN_SCH,Schedule Value,Hourly;
!
! Output:Variable,Type2_FAN_SCH,Schedule Value,Hourly;
!
! Output:Variable,Type3_FAN_SCH,Schedule Value,Hourly;
!
! ! Outdoor air
!
! Output:Variable,PSZ-AC_1:1_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_2:2_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_3:3_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_4:4_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_5:5_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_6:6_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_7:7_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_8:8_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_9:9_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_10:10_OAInlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! ! Return Air
!
! Output:Variable,PSZ-AC_1:1 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_2:2 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_3:3 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_4:4 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_5:5 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_6:6 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_7:7 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_8:8 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_9:9 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_10:10 Supply Equipment Inlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_1:1 Supply Equipment Inlet Node,System Node Temperature,Hourly;
!
! Output:Variable,PSZ-AC_2:2 Supply Equipment Inlet Node,System Node Temperature,Hourly;
!
! Output:Variable,PSZ-AC_3:3 Supply Equipment Inlet Node,System Node Temperature,Hourly;
!
! Output:Variable,PSZ-AC_4:4 Supply Equipment Inlet Node,System Node Temperature,Hourly;
!
! Output:Variable,PSZ-AC_5:5 Supply Equipment Inlet Node,System Node Temperature,Hourly;
!
! Output:Variable,PSZ-AC_6:6 Supply Equipment Inlet Node,System Node Temperature,Hourly;
!
! Output:Variable,PSZ-AC_7:7 Supply Equipment Inlet Node,System Node Temperature,Hourly;
!
! Output:Variable,PSZ-AC_8:8 Supply Equipment Inlet Node,System Node Temperature,Hourly;
!
! Output:Variable,PSZ-AC_9:9 Supply Equipment Inlet Node,System Node Temperature,Hourly;
!
! Output:Variable,PSZ-AC_10:10 Supply Equipment Inlet Node,System Node Temperature,Hourly;
!
! Output:Variable,PSZ-AC_1:1 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly;
!
! Output:Variable,PSZ-AC_2:2 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly;
!
! Output:Variable,PSZ-AC_3:3 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly;
!
! Output:Variable,PSZ-AC_4:4 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly;
!
! Output:Variable,PSZ-AC_5:5 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly;
!
! Output:Variable,PSZ-AC_6:6 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly;
!
! Output:Variable,PSZ-AC_7:7 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly;
!
! Output:Variable,PSZ-AC_8:8 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly;
!
! Output:Variable,PSZ-AC_9:9 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly;
!
! Output:Variable,PSZ-AC_10:10 Supply Equipment Inlet Node,System Node Wetbulb Temperature,Hourly;
!
! ! Supply Air
!
! Output:Variable,PSZ-AC_1:1 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_2:2 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_3:3 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_4:4 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_5:5 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_6:6 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_7:7 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_8:8 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_9:9 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_10:10 Supply Equipment Outlet Node,System Node Standard Density Volume Flow Rate,Hourly;
!
! Output:Variable,PSZ-AC_1:1 Supply Equipment Outlet Node,System Node Temperature,Hourly;
!
! Output:Variable,PSZ-AC_2:2 Supply Equipment Outlet Node,System Node Temperature,Hourly;
!
! Output:Variable,PSZ-AC_3:3 Supply Equipment Outlet Node,System Node Temperature,Hourly;
!
! Output:Variable,PSZ-AC_4:4 Supply Equipment Outlet Node,System Node Temperature,Hourly;
!
! Output:Variable,PSZ-AC_5:5 Supply Equipment Outlet Node,System Node Temperature,Hourly;
!
! Output:Variable,PSZ-AC_6:6 Supply Equipment Outlet Node,System Node Temperature,Hourly;
!
! Output:Variable,PSZ-AC_7:7 Supply Equipment Outlet Node,System Node Temperature,Hourly;
!
! Output:Variable,PSZ-AC_8:8 Supply Equipment Outlet Node,System Node Temperature,Hourly;
!
! Output:Variable,PSZ-AC_9:9 Supply Equipment Outlet Node,System Node Temperature,Hourly;
!
! Output:Variable,PSZ-AC_10:10 Supply Equipment Outlet Node,System Node Temperature,Hourly;
!
! Output:Variable,PSZ-AC_1:1 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly;
!
! Output:Variable,PSZ-AC_2:2 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly;
!
! Output:Variable,PSZ-AC_3:3 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly;
!
! Output:Variable,PSZ-AC_4:4 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly;
!
! Output:Variable,PSZ-AC_5:5 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly;
!
! Output:Variable,PSZ-AC_6:6 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly;
!
! Output:Variable,PSZ-AC_7:7 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly;
!
! Output:Variable,PSZ-AC_8:8 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly;
!
! Output:Variable,PSZ-AC_9:9 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly;
!
! Output:Variable,PSZ-AC_10:10 Supply Equipment Outlet Node,System Node Wetbulb Temperature,Hourly;
!
! ! Coil Load
!
! Output:Variable,*,Air System Cooling Coil Total Cooling Energy,Hourly;
!
! Output:Variable,*,Air System Heating Coil Total Heating Energy,Hourly;
!
! ! SHW
!
! Output:Variable,*,Water Heater Heating Rate,Hourly;
!
! ! Fan and Pump
!
! Output:Variable,*,Fan Electric Power,hourly; !- HVAC Average W
! Output:Variable,*,Pump Electric Power,hourly; !- HVAC Average W
! Output:Variable,*,Humidifier Electric Power,hourly; !- HVAC Average W
!
! ! Utility and Submeter
!
! Output:Meter,Electricity:Facility,Hourly;
! Output:Meter,Gas:Facility,Hourly;
! Output:Meter,InteriorLights:Electricity,Hourly;
! Output:Meter,ExteriorLights:Electricity,Hourly;
! Output:Meter,InteriorEquipment:Electricity,Hourly;
! Output:Meter,ExteriorEquipment:Electricity,Hourly;
! Output:Meter,Fans:Electricity,Hourly;
! Output:Meter,Pumps:Electricity,Hourly;
! Output:Meter,Heating:Electricity,Hourly;
! Output:Meter,Cooling:Electricity,Hourly;
! Output:Meter,HeatRejection:Electricity,Hourly;
! Output:Meter,Humidifier:Electricity,Hourly;
! Output:Meter,HeatRecovery:Electricity,Hourly;
! Output:Meter,DHW:Electricity,Hourly;
! Output:Meter,Cogeneration:Electricity,Hourly;
! Output:Meter,Refrigeration:Electricity,Hourly;
! Output:Meter,WaterSystems:Electricity,Hourly;
!
! Output:Meter,InteriorLights:Gas,Hourly;
! Output:Meter,ExteriorLights:Gas,Hourly;
! Output:Meter,InteriorEquipment:Gas,Hourly;
! Output:Meter,ExteriorEquipment:Gas,Hourly;
! Output:Meter,Fans:Gas,Hourly;
! Output:Meter,Pumps:Gas,Hourly;
! Output:Meter,Heating:Gas,Hourly;
! Output:Meter,Cooling:Gas,Hourly;
! Output:Meter,HeatRejection:Gas,Hourly;
! Output:Meter,Humidifier:Gas,Hourly;
! Output:Meter,HeatRecovery:Gas,Hourly;
! Output:Meter,DHW:Gas,Hourly;
! Output:Meter,Cogeneration:Gas,Hourly;
! Output:Meter,Refrigeration:Gas,Hourly;
! Output:Meter,WaterSystems:Gas,Hourly;
!
EnergyManagementSystem:Sensor,
OAT_F, !- Name
, !- Output:Variable or Output:Meter Index Key Name
Site Outdoor Air Drybulb Temperature; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:Sensor,
LGSTORE1_LSr, !- Name
LGSTORE1, !- Output:Variable or Output:Meter Index Key Name
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:Sensor,
LGSTORE1_Occ_Sensor, !- Name
LGSTORE1, !- Output:Variable or Output:Meter Index Key Name
People Occupant Count; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:InternalVariable,
LGSTORE1_Area, !- Name
LGSTORE1, !- Internal Data Index Key Name
Zone Floor Area; !- Internal Data Type
EnergyManagementSystem:Actuator,
LGSTORE1_Light_Actuator, !- Name
LGSTORE1_lights, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Actuator,
LGSTORE1_Light_ALLOWANCE_Actuator, !- Name
LGSTORE1_lights_ALLOWANCE, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Program,
SET_LGSTORE1_Light_EMS_Program, !- Name
SET LGSTORE1_LSr_IP=0.093*LGSTORE1_LSr/LGSTORE1_Area, ! Calculate the actual LPD for each hour
IF (LGSTORE1_Occ_Sensor <= 0) && (LGSTORE1_LSr_IP >= 0.02),
SET LGSTORE1_Light_Actuator = 0.02*LGSTORE1_Area/0.09290304,
SET LGSTORE1_Light_ALLOWANCE_Actuator = 0,
ELSE,
SET LGSTORE1_Light_Actuator = NULL,
SET LGSTORE1_Light_ALLOWANCE_Actuator = NULL,
ENDIF;
EnergyManagementSystem:ProgramCallingManager,
SET_LGSTORE1_Light_EMS_Program_Prog_Manager, !- Name
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
SET_LGSTORE1_Light_EMS_Program; !- Program Name 1
EnergyManagementSystem:Sensor,
SMSTORE1_LSr, !- Name
SMSTORE1, !- Output:Variable or Output:Meter Index Key Name
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:Sensor,
SMSTORE1_Occ_Sensor, !- Name
SMSTORE1, !- Output:Variable or Output:Meter Index Key Name
People Occupant Count; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:InternalVariable,
SMSTORE1_Area, !- Name
SMSTORE1, !- Internal Data Index Key Name
Zone Floor Area; !- Internal Data Type
EnergyManagementSystem:Actuator,
SMSTORE1_Light_Actuator, !- Name
SMSTORE1_lights, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Actuator,
SMSTORE1_Light_ALLOWANCE_Actuator, !- Name
SMSTORE1_lights_ALLOWANCE, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Program,
SET_SMSTORE1_Light_EMS_Program, !- Name
SET SMSTORE1_LSr_IP=0.093*SMSTORE1_LSr/SMSTORE1_Area, ! Calculate the actual LPD for each hour
IF (SMSTORE1_Occ_Sensor <= 0) && (SMSTORE1_LSr_IP >= 0.02),
SET SMSTORE1_Light_Actuator = 0.02*SMSTORE1_Area/0.09290304,
SET SMSTORE1_Light_ALLOWANCE_Actuator = 0,
ELSE,
SET SMSTORE1_Light_Actuator = NULL,
SET SMSTORE1_Light_ALLOWANCE_Actuator = NULL,
ENDIF;
EnergyManagementSystem:ProgramCallingManager,
SET_SMSTORE1_Light_EMS_Program_Prog_Manager, !- Name
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
SET_SMSTORE1_Light_EMS_Program; !- Program Name 1
EnergyManagementSystem:Sensor,
SMSTORE2_LSr, !- Name
SMSTORE2, !- Output:Variable or Output:Meter Index Key Name
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:Sensor,
SMSTORE2_Occ_Sensor, !- Name
SMSTORE2, !- Output:Variable or Output:Meter Index Key Name
People Occupant Count; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:InternalVariable,
SMSTORE2_Area, !- Name
SMSTORE2, !- Internal Data Index Key Name
Zone Floor Area; !- Internal Data Type
EnergyManagementSystem:Actuator,
SMSTORE2_Light_Actuator, !- Name
SMSTORE2_lights, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Actuator,
SMSTORE2_Light_ALLOWANCE_Actuator, !- Name
SMSTORE2_lights_ALLOWANCE, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Program,
SET_SMSTORE2_Light_EMS_Program, !- Name
SET SMSTORE2_LSr_IP=0.093*SMSTORE2_LSr/SMSTORE2_Area, ! Calculate the actual LPD for each hour
IF (SMSTORE2_Occ_Sensor <= 0) && (SMSTORE2_LSr_IP >= 0.02),
SET SMSTORE2_Light_Actuator = 0.02*SMSTORE2_Area/0.09290304,
SET SMSTORE2_Light_ALLOWANCE_Actuator = 0,
ELSE,
SET SMSTORE2_Light_Actuator = NULL,
SET SMSTORE2_Light_ALLOWANCE_Actuator = NULL,
ENDIF;
EnergyManagementSystem:ProgramCallingManager,
SET_SMSTORE2_Light_EMS_Program_Prog_Manager, !- Name
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
SET_SMSTORE2_Light_EMS_Program; !- Program Name 1
EnergyManagementSystem:Sensor,
SMSTORE3_LSr, !- Name
SMSTORE3, !- Output:Variable or Output:Meter Index Key Name
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:Sensor,
SMSTORE3_Occ_Sensor, !- Name
SMSTORE3, !- Output:Variable or Output:Meter Index Key Name
People Occupant Count; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:InternalVariable,
SMSTORE3_Area, !- Name
SMSTORE3, !- Internal Data Index Key Name
Zone Floor Area; !- Internal Data Type
EnergyManagementSystem:Actuator,
SMSTORE3_Light_Actuator, !- Name
SMSTORE3_lights, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Actuator,
SMSTORE3_Light_ALLOWANCE_Actuator, !- Name
SMSTORE3_lights_ALLOWANCE, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Program,
SET_SMSTORE3_Light_EMS_Program, !- Name
SET SMSTORE3_LSr_IP=0.093*SMSTORE3_LSr/SMSTORE3_Area, ! Calculate the actual LPD for each hour
IF (SMSTORE3_Occ_Sensor <= 0) && (SMSTORE3_LSr_IP >= 0.02),
SET SMSTORE3_Light_Actuator = 0.02*SMSTORE3_Area/0.09290304,
SET SMSTORE3_Light_ALLOWANCE_Actuator = 0,
ELSE,
SET SMSTORE3_Light_Actuator = NULL,
SET SMSTORE3_Light_ALLOWANCE_Actuator = NULL,
ENDIF;
EnergyManagementSystem:ProgramCallingManager,
SET_SMSTORE3_Light_EMS_Program_Prog_Manager, !- Name
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
SET_SMSTORE3_Light_EMS_Program; !- Program Name 1
EnergyManagementSystem:Sensor,
SMSTORE4_LSr, !- Name
SMSTORE4, !- Output:Variable or Output:Meter Index Key Name
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:Sensor,
SMSTORE4_Occ_Sensor, !- Name
SMSTORE4, !- Output:Variable or Output:Meter Index Key Name
People Occupant Count; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:InternalVariable,
SMSTORE4_Area, !- Name
SMSTORE4, !- Internal Data Index Key Name
Zone Floor Area; !- Internal Data Type
EnergyManagementSystem:Actuator,
SMSTORE4_Light_Actuator, !- Name
SMSTORE4_lights, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Actuator,
SMSTORE4_Light_ALLOWANCE_Actuator, !- Name
SMSTORE4_lights_ALLOWANCE, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Program,
SET_SMSTORE4_Light_EMS_Program, !- Name
SET SMSTORE4_LSr_IP=0.093*SMSTORE4_LSr/SMSTORE4_Area, ! Calculate the actual LPD for each hour
IF (SMSTORE4_Occ_Sensor <= 0) && (SMSTORE4_LSr_IP >= 0.02),
SET SMSTORE4_Light_Actuator = 0.02*SMSTORE4_Area/0.09290304,
SET SMSTORE4_Light_ALLOWANCE_Actuator = 0,
ELSE,
SET SMSTORE4_Light_Actuator = NULL,
SET SMSTORE4_Light_ALLOWANCE_Actuator = NULL,
ENDIF;
EnergyManagementSystem:ProgramCallingManager,
SET_SMSTORE4_Light_EMS_Program_Prog_Manager, !- Name
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
SET_SMSTORE4_Light_EMS_Program; !- Program Name 1
EnergyManagementSystem:Sensor,
SMSTORE5_LSr, !- Name
SMSTORE5, !- Output:Variable or Output:Meter Index Key Name
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:Sensor,
SMSTORE5_Occ_Sensor, !- Name
SMSTORE5, !- Output:Variable or Output:Meter Index Key Name
People Occupant Count; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:InternalVariable,
SMSTORE5_Area, !- Name
SMSTORE5, !- Internal Data Index Key Name
Zone Floor Area; !- Internal Data Type
EnergyManagementSystem:Actuator,
SMSTORE5_Light_Actuator, !- Name
SMSTORE5_lights, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Actuator,
SMSTORE5_Light_ALLOWANCE_Actuator, !- Name
SMSTORE5_lights_ALLOWANCE, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Program,
SET_SMSTORE5_Light_EMS_Program, !- Name
SET SMSTORE5_LSr_IP=0.093*SMSTORE5_LSr/SMSTORE5_Area, ! Calculate the actual LPD for each hour
IF (SMSTORE5_Occ_Sensor <= 0) && (SMSTORE5_LSr_IP >= 0.02),
SET SMSTORE5_Light_Actuator = 0.02*SMSTORE5_Area/0.09290304,
SET SMSTORE5_Light_ALLOWANCE_Actuator = 0,
ELSE,
SET SMSTORE5_Light_Actuator = NULL,
SET SMSTORE5_Light_ALLOWANCE_Actuator = NULL,
ENDIF;
EnergyManagementSystem:ProgramCallingManager,
SET_SMSTORE5_Light_EMS_Program_Prog_Manager, !- Name
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
SET_SMSTORE5_Light_EMS_Program; !- Program Name 1
EnergyManagementSystem:Sensor,
SMSTORE6_LSr, !- Name
SMSTORE6, !- Output:Variable or Output:Meter Index Key Name
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:Sensor,
SMSTORE6_Occ_Sensor, !- Name
SMSTORE6, !- Output:Variable or Output:Meter Index Key Name
People Occupant Count; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:InternalVariable,
SMSTORE6_Area, !- Name
SMSTORE6, !- Internal Data Index Key Name
Zone Floor Area; !- Internal Data Type
EnergyManagementSystem:Actuator,
SMSTORE6_Light_Actuator, !- Name
SMSTORE6_lights, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Actuator,
SMSTORE6_Light_ALLOWANCE_Actuator, !- Name
SMSTORE6_lights_ALLOWANCE, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Program,
SET_SMSTORE6_Light_EMS_Program, !- Name
SET SMSTORE6_LSr_IP=0.093*SMSTORE6_LSr/SMSTORE6_Area, ! Calculate the actual LPD for each hour
IF (SMSTORE6_Occ_Sensor <= 0) && (SMSTORE6_LSr_IP >= 0.02),
SET SMSTORE6_Light_Actuator = 0.02*SMSTORE6_Area/0.09290304,
SET SMSTORE6_Light_ALLOWANCE_Actuator = 0,
ELSE,
SET SMSTORE6_Light_Actuator = NULL,
SET SMSTORE6_Light_ALLOWANCE_Actuator = NULL,
ENDIF;
EnergyManagementSystem:ProgramCallingManager,
SET_SMSTORE6_Light_EMS_Program_Prog_Manager, !- Name
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
SET_SMSTORE6_Light_EMS_Program; !- Program Name 1
EnergyManagementSystem:Sensor,
SMSTORE7_LSr, !- Name
SMSTORE7, !- Output:Variable or Output:Meter Index Key Name
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:Sensor,
SMSTORE7_Occ_Sensor, !- Name
SMSTORE7, !- Output:Variable or Output:Meter Index Key Name
People Occupant Count; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:InternalVariable,
SMSTORE7_Area, !- Name
SMSTORE7, !- Internal Data Index Key Name
Zone Floor Area; !- Internal Data Type
EnergyManagementSystem:Actuator,
SMSTORE7_Light_Actuator, !- Name
SMSTORE7_lights, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Actuator,
SMSTORE7_Light_ALLOWANCE_Actuator, !- Name
SMSTORE7_lights_ALLOWANCE, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Program,
SET_SMSTORE7_Light_EMS_Program, !- Name
SET SMSTORE7_LSr_IP=0.093*SMSTORE7_LSr/SMSTORE7_Area, ! Calculate the actual LPD for each hour
IF (SMSTORE7_Occ_Sensor <= 0) && (SMSTORE7_LSr_IP >= 0.02),
SET SMSTORE7_Light_Actuator = 0.02*SMSTORE7_Area/0.09290304,
SET SMSTORE7_Light_ALLOWANCE_Actuator = 0,
ELSE,
SET SMSTORE7_Light_Actuator = NULL,
SET SMSTORE7_Light_ALLOWANCE_Actuator = NULL,
ENDIF;
EnergyManagementSystem:ProgramCallingManager,
SET_SMSTORE7_Light_EMS_Program_Prog_Manager, !- Name
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
SET_SMSTORE7_Light_EMS_Program; !- Program Name 1
EnergyManagementSystem:Sensor,
SMSTORE8_LSr, !- Name
SMSTORE8, !- Output:Variable or Output:Meter Index Key Name
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:Sensor,
SMSTORE8_Occ_Sensor, !- Name
SMSTORE8, !- Output:Variable or Output:Meter Index Key Name
People Occupant Count; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:InternalVariable,
SMSTORE8_Area, !- Name
SMSTORE8, !- Internal Data Index Key Name
Zone Floor Area; !- Internal Data Type
EnergyManagementSystem:Actuator,
SMSTORE8_Light_Actuator, !- Name
SMSTORE8_lights, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Actuator,
SMSTORE8_Light_ALLOWANCE_Actuator, !- Name
SMSTORE8_lights_ALLOWANCE, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Program,
SET_SMSTORE8_Light_EMS_Program, !- Name
SET SMSTORE8_LSr_IP=0.093*SMSTORE8_LSr/SMSTORE8_Area, ! Calculate the actual LPD for each hour
IF (SMSTORE8_Occ_Sensor <= 0) && (SMSTORE8_LSr_IP >= 0.02),
SET SMSTORE8_Light_Actuator = 0.02*SMSTORE8_Area/0.09290304,
SET SMSTORE8_Light_ALLOWANCE_Actuator = 0,
ELSE,
SET SMSTORE8_Light_Actuator = NULL,
SET SMSTORE8_Light_ALLOWANCE_Actuator = NULL,
ENDIF;
EnergyManagementSystem:ProgramCallingManager,
SET_SMSTORE8_Light_EMS_Program_Prog_Manager, !- Name
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
SET_SMSTORE8_Light_EMS_Program; !- Program Name 1
EnergyManagementSystem:Sensor,
LGSTORE2_LSr, !- Name
LGSTORE2, !- Output:Variable or Output:Meter Index Key Name
Zone Lights Electric Power; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:Sensor,
LGSTORE2_Occ_Sensor, !- Name
LGSTORE2, !- Output:Variable or Output:Meter Index Key Name
People Occupant Count; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:InternalVariable,
LGSTORE2_Area, !- Name
LGSTORE2, !- Internal Data Index Key Name
Zone Floor Area; !- Internal Data Type
EnergyManagementSystem:Actuator,
LGSTORE2_Light_Actuator, !- Name
LGSTORE2_lights, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Actuator,
LGSTORE2_Light_ALLOWANCE_Actuator, !- Name
LGSTORE2_lights_ALLOWANCE, !- Actuated Component Unique Name
Lights, !- Actuated Component Type
Electric Power Level; !- Actuated Component Control Type
EnergyManagementSystem:Program,
SET_LGSTORE2_Light_EMS_Program, !- Name
SET LGSTORE2_LSr_IP=0.093*LGSTORE2_LSr/LGSTORE2_Area, ! Calculate the actual LPD for each hour
IF (LGSTORE2_Occ_Sensor <= 0) && (LGSTORE2_LSr_IP >= 0.02),
SET LGSTORE2_Light_Actuator = 0.02*LGSTORE2_Area/0.09290304,
SET LGSTORE2_Light_ALLOWANCE_Actuator = 0,
ELSE,
SET LGSTORE2_Light_Actuator = NULL,
SET LGSTORE2_Light_ALLOWANCE_Actuator = NULL,
ENDIF;
EnergyManagementSystem:ProgramCallingManager,
SET_LGSTORE2_Light_EMS_Program_Prog_Manager, !- Name
BeginTimestepBeforePredictor, !- EnergyPlus Model Calling Point
SET_LGSTORE2_Light_EMS_Program; !- Program Name 1
Reference in New Issue View Git Blame Copy Permalink